From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001
From: André Fabian Silva Delgado <emulatorman@parabola.nu>
Date: Wed, 5 Aug 2015 17:04:01 -0300
Subject: Initial import

---
 drivers/video/fbdev/atmel_lcdfb.c | 1476 +++++++++++++++++++++++++++++++++++++
 1 file changed, 1476 insertions(+)
 create mode 100644 drivers/video/fbdev/atmel_lcdfb.c

(limited to 'drivers/video/fbdev/atmel_lcdfb.c')

diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c
new file mode 100644
index 000000000..94a8d04e6
--- /dev/null
+++ b/drivers/video/fbdev/atmel_lcdfb.c
@@ -0,0 +1,1476 @@
+/*
+ *  Driver for AT91/AT32 LCD Controller
+ *
+ *  Copyright (C) 2007 Atmel Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/backlight.h>
+#include <linux/gfp.h>
+#include <linux/module.h>
+#include <linux/platform_data/atmel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <video/of_display_timing.h>
+#include <linux/regulator/consumer.h>
+#include <video/videomode.h>
+
+#include <asm/gpio.h>
+
+#include <video/atmel_lcdc.h>
+
+struct atmel_lcdfb_config {
+	bool have_alt_pixclock;
+	bool have_hozval;
+	bool have_intensity_bit;
+};
+
+ /* LCD Controller info data structure, stored in device platform_data */
+struct atmel_lcdfb_info {
+	spinlock_t		lock;
+	struct fb_info		*info;
+	void __iomem		*mmio;
+	int			irq_base;
+	struct work_struct	task;
+
+	unsigned int		smem_len;
+	struct platform_device	*pdev;
+	struct clk		*bus_clk;
+	struct clk		*lcdc_clk;
+
+	struct backlight_device	*backlight;
+	u8			bl_power;
+	u8			saved_lcdcon;
+
+	u32			pseudo_palette[16];
+	bool			have_intensity_bit;
+
+	struct atmel_lcdfb_pdata pdata;
+
+	struct atmel_lcdfb_config *config;
+	struct regulator	*reg_lcd;
+};
+
+struct atmel_lcdfb_power_ctrl_gpio {
+	int gpio;
+	int active_low;
+
+	struct list_head list;
+};
+
+#define lcdc_readl(sinfo, reg)		__raw_readl((sinfo)->mmio+(reg))
+#define lcdc_writel(sinfo, reg, val)	__raw_writel((val), (sinfo)->mmio+(reg))
+
+/* configurable parameters */
+#define ATMEL_LCDC_CVAL_DEFAULT		0xc8
+#define ATMEL_LCDC_DMA_BURST_LEN	8	/* words */
+#define ATMEL_LCDC_FIFO_SIZE		512	/* words */
+
+static struct atmel_lcdfb_config at91sam9261_config = {
+	.have_hozval		= true,
+	.have_intensity_bit	= true,
+};
+
+static struct atmel_lcdfb_config at91sam9263_config = {
+	.have_intensity_bit	= true,
+};
+
+static struct atmel_lcdfb_config at91sam9g10_config = {
+	.have_hozval		= true,
+};
+
+static struct atmel_lcdfb_config at91sam9g45_config = {
+	.have_alt_pixclock	= true,
+};
+
+static struct atmel_lcdfb_config at91sam9g45es_config = {
+};
+
+static struct atmel_lcdfb_config at91sam9rl_config = {
+	.have_intensity_bit	= true,
+};
+
+static struct atmel_lcdfb_config at32ap_config = {
+	.have_hozval		= true,
+};
+
+static const struct platform_device_id atmel_lcdfb_devtypes[] = {
+	{
+		.name = "at91sam9261-lcdfb",
+		.driver_data = (unsigned long)&at91sam9261_config,
+	}, {
+		.name = "at91sam9263-lcdfb",
+		.driver_data = (unsigned long)&at91sam9263_config,
+	}, {
+		.name = "at91sam9g10-lcdfb",
+		.driver_data = (unsigned long)&at91sam9g10_config,
+	}, {
+		.name = "at91sam9g45-lcdfb",
+		.driver_data = (unsigned long)&at91sam9g45_config,
+	}, {
+		.name = "at91sam9g45es-lcdfb",
+		.driver_data = (unsigned long)&at91sam9g45es_config,
+	}, {
+		.name = "at91sam9rl-lcdfb",
+		.driver_data = (unsigned long)&at91sam9rl_config,
+	}, {
+		.name = "at32ap-lcdfb",
+		.driver_data = (unsigned long)&at32ap_config,
+	}, {
+		/* terminator */
+	}
+};
+MODULE_DEVICE_TABLE(platform, atmel_lcdfb_devtypes);
+
+static struct atmel_lcdfb_config *
+atmel_lcdfb_get_config(struct platform_device *pdev)
+{
+	unsigned long data;
+
+	data = platform_get_device_id(pdev)->driver_data;
+
+	return (struct atmel_lcdfb_config *)data;
+}
+
+#if defined(CONFIG_ARCH_AT91)
+#define	ATMEL_LCDFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
+					 | FBINFO_PARTIAL_PAN_OK \
+					 | FBINFO_HWACCEL_YPAN)
+
+static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+					struct fb_var_screeninfo *var,
+					struct fb_info *info)
+{
+
+}
+#elif defined(CONFIG_AVR32)
+#define	ATMEL_LCDFB_FBINFO_DEFAULT	(FBINFO_DEFAULT \
+					| FBINFO_PARTIAL_PAN_OK \
+					| FBINFO_HWACCEL_XPAN \
+					| FBINFO_HWACCEL_YPAN)
+
+static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+				     struct fb_var_screeninfo *var,
+				     struct fb_info *info)
+{
+	u32 dma2dcfg;
+	u32 pixeloff;
+
+	pixeloff = (var->xoffset * info->var.bits_per_pixel) & 0x1f;
+
+	dma2dcfg = (info->var.xres_virtual - info->var.xres)
+		 * info->var.bits_per_pixel / 8;
+	dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET;
+	lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
+
+	/* Update configuration */
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
+		    lcdc_readl(sinfo, ATMEL_LCDC_DMACON)
+		    | ATMEL_LCDC_DMAUPDT);
+}
+#endif
+
+static u32 contrast_ctr = ATMEL_LCDC_PS_DIV8
+		| ATMEL_LCDC_POL_POSITIVE
+		| ATMEL_LCDC_ENA_PWMENABLE;
+
+#ifdef CONFIG_BACKLIGHT_ATMEL_LCDC
+
+/* some bl->props field just changed */
+static int atmel_bl_update_status(struct backlight_device *bl)
+{
+	struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
+	int			power = sinfo->bl_power;
+	int			brightness = bl->props.brightness;
+
+	/* REVISIT there may be a meaningful difference between
+	 * fb_blank and power ... there seem to be some cases
+	 * this doesn't handle correctly.
+	 */
+	if (bl->props.fb_blank != sinfo->bl_power)
+		power = bl->props.fb_blank;
+	else if (bl->props.power != sinfo->bl_power)
+		power = bl->props.power;
+
+	if (brightness < 0 && power == FB_BLANK_UNBLANK)
+		brightness = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
+	else if (power != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, brightness);
+	if (contrast_ctr & ATMEL_LCDC_POL_POSITIVE)
+		lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR,
+			brightness ? contrast_ctr : 0);
+	else
+		lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
+
+	bl->props.fb_blank = bl->props.power = sinfo->bl_power = power;
+
+	return 0;
+}
+
+static int atmel_bl_get_brightness(struct backlight_device *bl)
+{
+	struct atmel_lcdfb_info *sinfo = bl_get_data(bl);
+
+	return lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_VAL);
+}
+
+static const struct backlight_ops atmel_lcdc_bl_ops = {
+	.update_status = atmel_bl_update_status,
+	.get_brightness = atmel_bl_get_brightness,
+};
+
+static void init_backlight(struct atmel_lcdfb_info *sinfo)
+{
+	struct backlight_properties props;
+	struct backlight_device	*bl;
+
+	sinfo->bl_power = FB_BLANK_UNBLANK;
+
+	if (sinfo->backlight)
+		return;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.type = BACKLIGHT_RAW;
+	props.max_brightness = 0xff;
+	bl = backlight_device_register("backlight", &sinfo->pdev->dev, sinfo,
+				       &atmel_lcdc_bl_ops, &props);
+	if (IS_ERR(bl)) {
+		dev_err(&sinfo->pdev->dev, "error %ld on backlight register\n",
+				PTR_ERR(bl));
+		return;
+	}
+	sinfo->backlight = bl;
+
+	bl->props.power = FB_BLANK_UNBLANK;
+	bl->props.fb_blank = FB_BLANK_UNBLANK;
+	bl->props.brightness = atmel_bl_get_brightness(bl);
+}
+
+static void exit_backlight(struct atmel_lcdfb_info *sinfo)
+{
+	if (!sinfo->backlight)
+		return;
+
+	if (sinfo->backlight->ops) {
+		sinfo->backlight->props.power = FB_BLANK_POWERDOWN;
+		sinfo->backlight->ops->update_status(sinfo->backlight);
+	}
+	backlight_device_unregister(sinfo->backlight);
+}
+
+#else
+
+static void init_backlight(struct atmel_lcdfb_info *sinfo)
+{
+	dev_warn(&sinfo->pdev->dev, "backlight control is not available\n");
+}
+
+static void exit_backlight(struct atmel_lcdfb_info *sinfo)
+{
+}
+
+#endif
+
+static void init_contrast(struct atmel_lcdfb_info *sinfo)
+{
+	struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
+
+	/* contrast pwm can be 'inverted' */
+	if (pdata->lcdcon_pol_negative)
+		contrast_ctr &= ~(ATMEL_LCDC_POL_POSITIVE);
+
+	/* have some default contrast/backlight settings */
+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
+
+	if (pdata->lcdcon_is_backlight)
+		init_backlight(sinfo);
+}
+
+static inline void atmel_lcdfb_power_control(struct atmel_lcdfb_info *sinfo, int on)
+{
+	int ret;
+	struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
+
+	if (pdata->atmel_lcdfb_power_control)
+		pdata->atmel_lcdfb_power_control(pdata, on);
+	else if (sinfo->reg_lcd) {
+		if (on) {
+			ret = regulator_enable(sinfo->reg_lcd);
+			if (ret)
+				dev_err(&sinfo->pdev->dev,
+					"lcd regulator enable failed:	%d\n", ret);
+		} else {
+			ret = regulator_disable(sinfo->reg_lcd);
+			if (ret)
+				dev_err(&sinfo->pdev->dev,
+					"lcd regulator disable failed: %d\n", ret);
+		}
+	}
+}
+
+static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
+	.type		= FB_TYPE_PACKED_PIXELS,
+	.visual		= FB_VISUAL_TRUECOLOR,
+	.xpanstep	= 0,
+	.ypanstep	= 1,
+	.ywrapstep	= 0,
+	.accel		= FB_ACCEL_NONE,
+};
+
+static unsigned long compute_hozval(struct atmel_lcdfb_info *sinfo,
+							unsigned long xres)
+{
+	unsigned long lcdcon2;
+	unsigned long value;
+
+	if (!sinfo->config->have_hozval)
+		return xres;
+
+	lcdcon2 = lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2);
+	value = xres;
+	if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) {
+		/* STN display */
+		if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) {
+			value *= 3;
+		}
+		if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4
+		   || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8
+		      && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL ))
+			value = DIV_ROUND_UP(value, 4);
+		else
+			value = DIV_ROUND_UP(value, 8);
+	}
+
+	return value;
+}
+
+static void atmel_lcdfb_stop_nowait(struct atmel_lcdfb_info *sinfo)
+{
+	struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
+
+	/* Turn off the LCD controller and the DMA controller */
+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+			pdata->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
+
+	/* Wait for the LCDC core to become idle */
+	while (lcdc_readl(sinfo, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY)
+		msleep(10);
+
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+}
+
+static void atmel_lcdfb_stop(struct atmel_lcdfb_info *sinfo)
+{
+	atmel_lcdfb_stop_nowait(sinfo);
+
+	/* Wait for DMA engine to become idle... */
+	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+		msleep(10);
+}
+
+static void atmel_lcdfb_start(struct atmel_lcdfb_info *sinfo)
+{
+	struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
+
+	lcdc_writel(sinfo, ATMEL_LCDC_DMACON, pdata->default_dmacon);
+	lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
+		(pdata->guard_time << ATMEL_LCDC_GUARDT_OFFSET)
+		| ATMEL_LCDC_PWR);
+}
+
+static void atmel_lcdfb_update_dma(struct fb_info *info,
+			       struct fb_var_screeninfo *var)
+{
+	struct atmel_lcdfb_info *sinfo = info->par;
+	struct fb_fix_screeninfo *fix = &info->fix;
+	unsigned long dma_addr;
+
+	dma_addr = (fix->smem_start + var->yoffset * fix->line_length
+		    + var->xoffset * info->var.bits_per_pixel / 8);
+
+	dma_addr &= ~3UL;
+
+	/* Set framebuffer DMA base address and pixel offset */
+	lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
+
+	atmel_lcdfb_update_dma2d(sinfo, var, info);
+}
+
+static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo)
+{
+	struct fb_info *info = sinfo->info;
+
+	dma_free_writecombine(info->device, info->fix.smem_len,
+				info->screen_base, info->fix.smem_start);
+}
+
+/**
+ *	atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
+ *	@sinfo: the frame buffer to allocate memory for
+ * 	
+ * 	This function is called only from the atmel_lcdfb_probe()
+ * 	so no locking by fb_info->mm_lock around smem_len setting is needed.
+ */
+static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
+{
+	struct fb_info *info = sinfo->info;
+	struct fb_var_screeninfo *var = &info->var;
+	unsigned int smem_len;
+
+	smem_len = (var->xres_virtual * var->yres_virtual
+		    * ((var->bits_per_pixel + 7) / 8));
+	info->fix.smem_len = max(smem_len, sinfo->smem_len);
+
+	info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
+					(dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
+
+	if (!info->screen_base) {
+		return -ENOMEM;
+	}
+
+	memset(info->screen_base, 0, info->fix.smem_len);
+
+	return 0;
+}
+
+static const struct fb_videomode *atmel_lcdfb_choose_mode(struct fb_var_screeninfo *var,
+						     struct fb_info *info)
+{
+	struct fb_videomode varfbmode;
+	const struct fb_videomode *fbmode = NULL;
+
+	fb_var_to_videomode(&varfbmode, var);
+	fbmode = fb_find_nearest_mode(&varfbmode, &info->modelist);
+	if (fbmode)
+		fb_videomode_to_var(var, fbmode);
+	return fbmode;
+}
+
+
+/**
+ *      atmel_lcdfb_check_var - Validates a var passed in.
+ *      @var: frame buffer variable screen structure
+ *      @info: frame buffer structure that represents a single frame buffer
+ *
+ *	Checks to see if the hardware supports the state requested by
+ *	var passed in. This function does not alter the hardware
+ *	state!!!  This means the data stored in struct fb_info and
+ *	struct atmel_lcdfb_info do not change. This includes the var
+ *	inside of struct fb_info.  Do NOT change these. This function
+ *	can be called on its own if we intent to only test a mode and
+ *	not actually set it. The stuff in modedb.c is a example of
+ *	this. If the var passed in is slightly off by what the
+ *	hardware can support then we alter the var PASSED in to what
+ *	we can do. If the hardware doesn't support mode change a
+ *	-EINVAL will be returned by the upper layers. You don't need
+ *	to implement this function then. If you hardware doesn't
+ *	support changing the resolution then this function is not
+ *	needed. In this case the driver would just provide a var that
+ *	represents the static state the screen is in.
+ *
+ *	Returns negative errno on error, or zero on success.
+ */
+static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
+			     struct fb_info *info)
+{
+	struct device *dev = info->device;
+	struct atmel_lcdfb_info *sinfo = info->par;
+	struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
+	unsigned long clk_value_khz;
+
+	clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
+
+	dev_dbg(dev, "%s:\n", __func__);
+
+	if (!(var->pixclock && var->bits_per_pixel)) {
+		/* choose a suitable mode if possible */
+		if (!atmel_lcdfb_choose_mode(var, info)) {
+			dev_err(dev, "needed value not specified\n");
+			return -EINVAL;
+		}
+	}
+
+	dev_dbg(dev, "  resolution: %ux%u\n", var->xres, var->yres);
+	dev_dbg(dev, "  pixclk:     %lu KHz\n", PICOS2KHZ(var->pixclock));
+	dev_dbg(dev, "  bpp:        %u\n", var->bits_per_pixel);
+	dev_dbg(dev, "  clk:        %lu KHz\n", clk_value_khz);
+
+	if (PICOS2KHZ(var->pixclock) > clk_value_khz) {
+		dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
+		return -EINVAL;
+	}
+
+	/* Do not allow to have real resoulution larger than virtual */
+	if (var->xres > var->xres_virtual)
+		var->xres_virtual = var->xres;
+
+	if (var->yres > var->yres_virtual)
+		var->yres_virtual = var->yres;
+
+	/* Force same alignment for each line */
+	var->xres = (var->xres + 3) & ~3UL;
+	var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
+
+	var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
+	var->transp.msb_right = 0;
+	var->transp.offset = var->transp.length = 0;
+	var->xoffset = var->yoffset = 0;
+
+	if (info->fix.smem_len) {
+		unsigned int smem_len = (var->xres_virtual * var->yres_virtual
+					 * ((var->bits_per_pixel + 7) / 8));
+		if (smem_len > info->fix.smem_len) {
+			dev_err(dev, "Frame buffer is too small (%u) for screen size (need at least %u)\n",
+				info->fix.smem_len, smem_len);
+			return -EINVAL;
+		}
+	}
+
+	/* Saturate vertical and horizontal timings at maximum values */
+	var->vsync_len = min_t(u32, var->vsync_len,
+			(ATMEL_LCDC_VPW >> ATMEL_LCDC_VPW_OFFSET) + 1);
+	var->upper_margin = min_t(u32, var->upper_margin,
+			ATMEL_LCDC_VBP >> ATMEL_LCDC_VBP_OFFSET);
+	var->lower_margin = min_t(u32, var->lower_margin,
+			ATMEL_LCDC_VFP);
+	var->right_margin = min_t(u32, var->right_margin,
+			(ATMEL_LCDC_HFP >> ATMEL_LCDC_HFP_OFFSET) + 1);
+	var->hsync_len = min_t(u32, var->hsync_len,
+			(ATMEL_LCDC_HPW >> ATMEL_LCDC_HPW_OFFSET) + 1);
+	var->left_margin = min_t(u32, var->left_margin,
+			ATMEL_LCDC_HBP + 1);
+
+	/* Some parameters can't be zero */
+	var->vsync_len = max_t(u32, var->vsync_len, 1);
+	var->right_margin = max_t(u32, var->right_margin, 1);
+	var->hsync_len = max_t(u32, var->hsync_len, 1);
+	var->left_margin = max_t(u32, var->left_margin, 1);
+
+	switch (var->bits_per_pixel) {
+	case 1:
+	case 2:
+	case 4:
+	case 8:
+		var->red.offset = var->green.offset = var->blue.offset = 0;
+		var->red.length = var->green.length = var->blue.length
+			= var->bits_per_pixel;
+		break;
+	case 16:
+		/* Older SOCs use IBGR:555 rather than BGR:565. */
+		if (sinfo->config->have_intensity_bit)
+			var->green.length = 5;
+		else
+			var->green.length = 6;
+
+		if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
+			/* RGB:5X5 mode */
+			var->red.offset = var->green.length + 5;
+			var->blue.offset = 0;
+		} else {
+			/* BGR:5X5 mode */
+			var->red.offset = 0;
+			var->blue.offset = var->green.length + 5;
+		}
+		var->green.offset = 5;
+		var->red.length = var->blue.length = 5;
+		break;
+	case 32:
+		var->transp.offset = 24;
+		var->transp.length = 8;
+		/* fall through */
+	case 24:
+		if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
+			/* RGB:888 mode */
+			var->red.offset = 16;
+			var->blue.offset = 0;
+		} else {
+			/* BGR:888 mode */
+			var->red.offset = 0;
+			var->blue.offset = 16;
+		}
+		var->green.offset = 8;
+		var->red.length = var->green.length = var->blue.length = 8;
+		break;
+	default:
+		dev_err(dev, "color depth %d not supported\n",
+					var->bits_per_pixel);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * LCD reset sequence
+ */
+static void atmel_lcdfb_reset(struct atmel_lcdfb_info *sinfo)
+{
+	might_sleep();
+
+	atmel_lcdfb_stop(sinfo);
+	atmel_lcdfb_start(sinfo);
+}
+
+/**
+ *      atmel_lcdfb_set_par - Alters the hardware state.
+ *      @info: frame buffer structure that represents a single frame buffer
+ *
+ *	Using the fb_var_screeninfo in fb_info we set the resolution
+ *	of the this particular framebuffer. This function alters the
+ *	par AND the fb_fix_screeninfo stored in fb_info. It doesn't
+ *	not alter var in fb_info since we are using that data. This
+ *	means we depend on the data in var inside fb_info to be
+ *	supported by the hardware.  atmel_lcdfb_check_var is always called
+ *	before atmel_lcdfb_set_par to ensure this.  Again if you can't
+ *	change the resolution you don't need this function.
+ *
+ */
+static int atmel_lcdfb_set_par(struct fb_info *info)
+{
+	struct atmel_lcdfb_info *sinfo = info->par;
+	struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
+	unsigned long hozval_linesz;
+	unsigned long value;
+	unsigned long clk_value_khz;
+	unsigned long bits_per_line;
+	unsigned long pix_factor = 2;
+
+	might_sleep();
+
+	dev_dbg(info->device, "%s:\n", __func__);
+	dev_dbg(info->device, "  * resolution: %ux%u (%ux%u virtual)\n",
+		 info->var.xres, info->var.yres,
+		 info->var.xres_virtual, info->var.yres_virtual);
+
+	atmel_lcdfb_stop_nowait(sinfo);
+
+	if (info->var.bits_per_pixel == 1)
+		info->fix.visual = FB_VISUAL_MONO01;
+	else if (info->var.bits_per_pixel <= 8)
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+	else
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+
+	bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel;
+	info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8);
+
+	/* Re-initialize the DMA engine... */
+	dev_dbg(info->device, "  * update DMA engine\n");
+	atmel_lcdfb_update_dma(info, &info->var);
+
+	/* ...set frame size and burst length = 8 words (?) */
+	value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
+	value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
+	lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
+
+	/* Now, the LCDC core... */
+
+	/* Set pixel clock */
+	if (sinfo->config->have_alt_pixclock)
+		pix_factor = 1;
+
+	clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
+
+	value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
+
+	if (value < pix_factor) {
+		dev_notice(info->device, "Bypassing pixel clock divider\n");
+		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
+	} else {
+		value = (value / pix_factor) - 1;
+		dev_dbg(info->device, "  * programming CLKVAL = 0x%08lx\n",
+				value);
+		lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1,
+				value << ATMEL_LCDC_CLKVAL_OFFSET);
+		info->var.pixclock =
+			KHZ2PICOS(clk_value_khz / (pix_factor * (value + 1)));
+		dev_dbg(info->device, "  updated pixclk:     %lu KHz\n",
+					PICOS2KHZ(info->var.pixclock));
+	}
+
+
+	/* Initialize control register 2 */
+	value = pdata->default_lcdcon2;
+
+	if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
+		value |= ATMEL_LCDC_INVLINE_INVERTED;
+	if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
+		value |= ATMEL_LCDC_INVFRAME_INVERTED;
+
+	switch (info->var.bits_per_pixel) {
+		case 1:	value |= ATMEL_LCDC_PIXELSIZE_1; break;
+		case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
+		case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
+		case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
+		case 15: /* fall through */
+		case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
+		case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
+		case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
+		default: BUG(); break;
+	}
+	dev_dbg(info->device, "  * LCDCON2 = %08lx\n", value);
+	lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
+
+	/* Vertical timing */
+	value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
+	value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
+	value |= info->var.lower_margin;
+	dev_dbg(info->device, "  * LCDTIM1 = %08lx\n", value);
+	lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
+
+	/* Horizontal timing */
+	value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
+	value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
+	value |= (info->var.left_margin - 1);
+	dev_dbg(info->device, "  * LCDTIM2 = %08lx\n", value);
+	lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
+
+	/* Horizontal value (aka line size) */
+	hozval_linesz = compute_hozval(sinfo, info->var.xres);
+
+	/* Display size */
+	value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
+	value |= info->var.yres - 1;
+	dev_dbg(info->device, "  * LCDFRMCFG = %08lx\n", value);
+	lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
+
+	/* FIFO Threshold: Use formula from data sheet */
+	value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
+	lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
+
+	/* Toggle LCD_MODE every frame */
+	lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
+
+	/* Disable all interrupts */
+	lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+	/* Enable FIFO & DMA errors */
+	lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI | ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
+
+	/* ...wait for DMA engine to become idle... */
+	while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
+		msleep(10);
+
+	atmel_lcdfb_start(sinfo);
+
+	dev_dbg(info->device, "  * DONE\n");
+
+	return 0;
+}
+
+static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf)
+{
+	chan &= 0xffff;
+	chan >>= 16 - bf->length;
+	return chan << bf->offset;
+}
+
+/**
+ *  	atmel_lcdfb_setcolreg - Optional function. Sets a color register.
+ *      @regno: Which register in the CLUT we are programming
+ *      @red: The red value which can be up to 16 bits wide
+ *	@green: The green value which can be up to 16 bits wide
+ *	@blue:  The blue value which can be up to 16 bits wide.
+ *	@transp: If supported the alpha value which can be up to 16 bits wide.
+ *      @info: frame buffer info structure
+ *
+ *  	Set a single color register. The values supplied have a 16 bit
+ *  	magnitude which needs to be scaled in this function for the hardware.
+ *	Things to take into consideration are how many color registers, if
+ *	any, are supported with the current color visual. With truecolor mode
+ *	no color palettes are supported. Here a pseudo palette is created
+ *	which we store the value in pseudo_palette in struct fb_info. For
+ *	pseudocolor mode we have a limited color palette. To deal with this
+ *	we can program what color is displayed for a particular pixel value.
+ *	DirectColor is similar in that we can program each color field. If
+ *	we have a static colormap we don't need to implement this function.
+ *
+ *	Returns negative errno on error, or zero on success. In an
+ *	ideal world, this would have been the case, but as it turns
+ *	out, the other drivers return 1 on failure, so that's what
+ *	we're going to do.
+ */
+static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
+			     unsigned int green, unsigned int blue,
+			     unsigned int transp, struct fb_info *info)
+{
+	struct atmel_lcdfb_info *sinfo = info->par;
+	struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
+	unsigned int val;
+	u32 *pal;
+	int ret = 1;
+
+	if (info->var.grayscale)
+		red = green = blue = (19595 * red + 38470 * green
+				      + 7471 * blue) >> 16;
+
+	switch (info->fix.visual) {
+	case FB_VISUAL_TRUECOLOR:
+		if (regno < 16) {
+			pal = info->pseudo_palette;
+
+			val  = chan_to_field(red, &info->var.red);
+			val |= chan_to_field(green, &info->var.green);
+			val |= chan_to_field(blue, &info->var.blue);
+
+			pal[regno] = val;
+			ret = 0;
+		}
+		break;
+
+	case FB_VISUAL_PSEUDOCOLOR:
+		if (regno < 256) {
+			if (sinfo->config->have_intensity_bit) {
+				/* old style I+BGR:555 */
+				val  = ((red   >> 11) & 0x001f);
+				val |= ((green >>  6) & 0x03e0);
+				val |= ((blue  >>  1) & 0x7c00);
+
+				/*
+				 * TODO: intensity bit. Maybe something like
+				 *   ~(red[10] ^ green[10] ^ blue[10]) & 1
+				 */
+			} else {
+				/* new style BGR:565 / RGB:565 */
+				if (pdata->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
+					val  = ((blue >> 11) & 0x001f);
+					val |= ((red  >>  0) & 0xf800);
+				} else {
+					val  = ((red  >> 11) & 0x001f);
+					val |= ((blue >>  0) & 0xf800);
+				}
+
+				val |= ((green >>  5) & 0x07e0);
+			}
+
+			lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
+			ret = 0;
+		}
+		break;
+
+	case FB_VISUAL_MONO01:
+		if (regno < 2) {
+			val = (regno == 0) ? 0x00 : 0x1F;
+			lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
+			ret = 0;
+		}
+		break;
+
+	}
+
+	return ret;
+}
+
+static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
+			       struct fb_info *info)
+{
+	dev_dbg(info->device, "%s\n", __func__);
+
+	atmel_lcdfb_update_dma(info, var);
+
+	return 0;
+}
+
+static int atmel_lcdfb_blank(int blank_mode, struct fb_info *info)
+{
+	struct atmel_lcdfb_info *sinfo = info->par;
+
+	switch (blank_mode) {
+	case FB_BLANK_UNBLANK:
+	case FB_BLANK_NORMAL:
+		atmel_lcdfb_start(sinfo);
+		break;
+	case FB_BLANK_VSYNC_SUSPEND:
+	case FB_BLANK_HSYNC_SUSPEND:
+		break;
+	case FB_BLANK_POWERDOWN:
+		atmel_lcdfb_stop(sinfo);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* let fbcon do a soft blank for us */
+	return ((blank_mode == FB_BLANK_NORMAL) ? 1 : 0);
+}
+
+static struct fb_ops atmel_lcdfb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= atmel_lcdfb_check_var,
+	.fb_set_par	= atmel_lcdfb_set_par,
+	.fb_setcolreg	= atmel_lcdfb_setcolreg,
+	.fb_blank	= atmel_lcdfb_blank,
+	.fb_pan_display	= atmel_lcdfb_pan_display,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+};
+
+static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
+{
+	struct fb_info *info = dev_id;
+	struct atmel_lcdfb_info *sinfo = info->par;
+	u32 status;
+
+	status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
+	if (status & ATMEL_LCDC_UFLWI) {
+		dev_warn(info->device, "FIFO underflow %#x\n", status);
+		/* reset DMA and FIFO to avoid screen shifting */
+		schedule_work(&sinfo->task);
+	}
+	lcdc_writel(sinfo, ATMEL_LCDC_ICR, status);
+	return IRQ_HANDLED;
+}
+
+/*
+ * LCD controller task (to reset the LCD)
+ */
+static void atmel_lcdfb_task(struct work_struct *work)
+{
+	struct atmel_lcdfb_info *sinfo =
+		container_of(work, struct atmel_lcdfb_info, task);
+
+	atmel_lcdfb_reset(sinfo);
+}
+
+static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
+{
+	struct fb_info *info = sinfo->info;
+	int ret = 0;
+
+	info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
+
+	dev_info(info->device,
+	       "%luKiB frame buffer at %08lx (mapped at %p)\n",
+	       (unsigned long)info->fix.smem_len / 1024,
+	       (unsigned long)info->fix.smem_start,
+	       info->screen_base);
+
+	/* Allocate colormap */
+	ret = fb_alloc_cmap(&info->cmap, 256, 0);
+	if (ret < 0)
+		dev_err(info->device, "Alloc color map failed\n");
+
+	return ret;
+}
+
+static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
+{
+	clk_prepare_enable(sinfo->bus_clk);
+	clk_prepare_enable(sinfo->lcdc_clk);
+}
+
+static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
+{
+	clk_disable_unprepare(sinfo->bus_clk);
+	clk_disable_unprepare(sinfo->lcdc_clk);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id atmel_lcdfb_dt_ids[] = {
+	{ .compatible = "atmel,at91sam9261-lcdc" , .data = &at91sam9261_config, },
+	{ .compatible = "atmel,at91sam9263-lcdc" , .data = &at91sam9263_config, },
+	{ .compatible = "atmel,at91sam9g10-lcdc" , .data = &at91sam9g10_config, },
+	{ .compatible = "atmel,at91sam9g45-lcdc" , .data = &at91sam9g45_config, },
+	{ .compatible = "atmel,at91sam9g45es-lcdc" , .data = &at91sam9g45es_config, },
+	{ .compatible = "atmel,at91sam9rl-lcdc" , .data = &at91sam9rl_config, },
+	{ .compatible = "atmel,at32ap-lcdc" , .data = &at32ap_config, },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_lcdfb_dt_ids);
+
+static const char *atmel_lcdfb_wiring_modes[] = {
+	[ATMEL_LCDC_WIRING_BGR]	= "BRG",
+	[ATMEL_LCDC_WIRING_RGB]	= "RGB",
+};
+
+const int atmel_lcdfb_get_of_wiring_modes(struct device_node *np)
+{
+	const char *mode;
+	int err, i;
+
+	err = of_property_read_string(np, "atmel,lcd-wiring-mode", &mode);
+	if (err < 0)
+		return ATMEL_LCDC_WIRING_BGR;
+
+	for (i = 0; i < ARRAY_SIZE(atmel_lcdfb_wiring_modes); i++)
+		if (!strcasecmp(mode, atmel_lcdfb_wiring_modes[i]))
+			return i;
+
+	return -ENODEV;
+}
+
+static void atmel_lcdfb_power_control_gpio(struct atmel_lcdfb_pdata *pdata, int on)
+{
+	struct atmel_lcdfb_power_ctrl_gpio *og;
+
+	list_for_each_entry(og, &pdata->pwr_gpios, list)
+		gpio_set_value(og->gpio, on);
+}
+
+static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo)
+{
+	struct fb_info *info = sinfo->info;
+	struct atmel_lcdfb_pdata *pdata = &sinfo->pdata;
+	struct fb_var_screeninfo *var = &info->var;
+	struct device *dev = &sinfo->pdev->dev;
+	struct device_node *np =dev->of_node;
+	struct device_node *display_np;
+	struct device_node *timings_np;
+	struct display_timings *timings;
+	enum of_gpio_flags flags;
+	struct atmel_lcdfb_power_ctrl_gpio *og;
+	bool is_gpio_power = false;
+	int ret = -ENOENT;
+	int i, gpio;
+
+	sinfo->config = (struct atmel_lcdfb_config*)
+		of_match_device(atmel_lcdfb_dt_ids, dev)->data;
+
+	display_np = of_parse_phandle(np, "display", 0);
+	if (!display_np) {
+		dev_err(dev, "failed to find display phandle\n");
+		return -ENOENT;
+	}
+
+	ret = of_property_read_u32(display_np, "bits-per-pixel", &var->bits_per_pixel);
+	if (ret < 0) {
+		dev_err(dev, "failed to get property bits-per-pixel\n");
+		goto put_display_node;
+	}
+
+	ret = of_property_read_u32(display_np, "atmel,guard-time", &pdata->guard_time);
+	if (ret < 0) {
+		dev_err(dev, "failed to get property atmel,guard-time\n");
+		goto put_display_node;
+	}
+
+	ret = of_property_read_u32(display_np, "atmel,lcdcon2", &pdata->default_lcdcon2);
+	if (ret < 0) {
+		dev_err(dev, "failed to get property atmel,lcdcon2\n");
+		goto put_display_node;
+	}
+
+	ret = of_property_read_u32(display_np, "atmel,dmacon", &pdata->default_dmacon);
+	if (ret < 0) {
+		dev_err(dev, "failed to get property bits-per-pixel\n");
+		goto put_display_node;
+	}
+
+	INIT_LIST_HEAD(&pdata->pwr_gpios);
+	ret = -ENOMEM;
+	for (i = 0; i < of_gpio_named_count(display_np, "atmel,power-control-gpio"); i++) {
+		gpio = of_get_named_gpio_flags(display_np, "atmel,power-control-gpio",
+					       i, &flags);
+		if (gpio < 0)
+			continue;
+
+		og = devm_kzalloc(dev, sizeof(*og), GFP_KERNEL);
+		if (!og)
+			goto put_display_node;
+
+		og->gpio = gpio;
+		og->active_low = flags & OF_GPIO_ACTIVE_LOW;
+		is_gpio_power = true;
+		ret = devm_gpio_request(dev, gpio, "lcd-power-control-gpio");
+		if (ret) {
+			dev_err(dev, "request gpio %d failed\n", gpio);
+			goto put_display_node;
+		}
+
+		ret = gpio_direction_output(gpio, og->active_low);
+		if (ret) {
+			dev_err(dev, "set direction output gpio %d failed\n", gpio);
+			goto put_display_node;
+		}
+		list_add(&og->list, &pdata->pwr_gpios);
+	}
+
+	if (is_gpio_power)
+		pdata->atmel_lcdfb_power_control = atmel_lcdfb_power_control_gpio;
+
+	ret = atmel_lcdfb_get_of_wiring_modes(display_np);
+	if (ret < 0) {
+		dev_err(dev, "invalid atmel,lcd-wiring-mode\n");
+		goto put_display_node;
+	}
+	pdata->lcd_wiring_mode = ret;
+
+	pdata->lcdcon_is_backlight = of_property_read_bool(display_np, "atmel,lcdcon-backlight");
+	pdata->lcdcon_pol_negative = of_property_read_bool(display_np, "atmel,lcdcon-backlight-inverted");
+
+	timings = of_get_display_timings(display_np);
+	if (!timings) {
+		dev_err(dev, "failed to get display timings\n");
+		ret = -EINVAL;
+		goto put_display_node;
+	}
+
+	timings_np = of_find_node_by_name(display_np, "display-timings");
+	if (!timings_np) {
+		dev_err(dev, "failed to find display-timings node\n");
+		ret = -ENODEV;
+		goto put_display_node;
+	}
+
+	for (i = 0; i < of_get_child_count(timings_np); i++) {
+		struct videomode vm;
+		struct fb_videomode fb_vm;
+
+		ret = videomode_from_timings(timings, &vm, i);
+		if (ret < 0)
+			goto put_timings_node;
+		ret = fb_videomode_from_videomode(&vm, &fb_vm);
+		if (ret < 0)
+			goto put_timings_node;
+
+		fb_add_videomode(&fb_vm, &info->modelist);
+	}
+
+	return 0;
+
+put_timings_node:
+	of_node_put(timings_np);
+put_display_node:
+	of_node_put(display_np);
+	return ret;
+}
+#else
+static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo)
+{
+	return 0;
+}
+#endif
+
+static int __init atmel_lcdfb_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct fb_info *info;
+	struct atmel_lcdfb_info *sinfo;
+	struct atmel_lcdfb_pdata *pdata = NULL;
+	struct resource *regs = NULL;
+	struct resource *map = NULL;
+	struct fb_modelist *modelist;
+	int ret;
+
+	dev_dbg(dev, "%s BEGIN\n", __func__);
+
+	ret = -ENOMEM;
+	info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
+	if (!info) {
+		dev_err(dev, "cannot allocate memory\n");
+		goto out;
+	}
+
+	sinfo = info->par;
+	sinfo->pdev = pdev;
+	sinfo->info = info;
+
+	INIT_LIST_HEAD(&info->modelist);
+
+	if (pdev->dev.of_node) {
+		ret = atmel_lcdfb_of_init(sinfo);
+		if (ret)
+			goto free_info;
+	} else if (dev_get_platdata(dev)) {
+		struct fb_monspecs *monspecs;
+		int i;
+
+		pdata = dev_get_platdata(dev);
+		monspecs = pdata->default_monspecs;
+		sinfo->pdata = *pdata;
+
+		for (i = 0; i < monspecs->modedb_len; i++)
+			fb_add_videomode(&monspecs->modedb[i], &info->modelist);
+
+		sinfo->config = atmel_lcdfb_get_config(pdev);
+
+		info->var.bits_per_pixel = pdata->default_bpp ? pdata->default_bpp : 16;
+		memcpy(&info->monspecs, pdata->default_monspecs, sizeof(info->monspecs));
+	} else {
+		dev_err(dev, "cannot get default configuration\n");
+		goto free_info;
+	}
+
+	if (!sinfo->config)
+		goto free_info;
+
+	sinfo->reg_lcd = devm_regulator_get(&pdev->dev, "lcd");
+	if (IS_ERR(sinfo->reg_lcd))
+		sinfo->reg_lcd = NULL;
+
+	info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
+	info->pseudo_palette = sinfo->pseudo_palette;
+	info->fbops = &atmel_lcdfb_ops;
+
+	info->fix = atmel_lcdfb_fix;
+	strcpy(info->fix.id, sinfo->pdev->name);
+
+	/* Enable LCDC Clocks */
+	sinfo->bus_clk = clk_get(dev, "hclk");
+	if (IS_ERR(sinfo->bus_clk)) {
+		ret = PTR_ERR(sinfo->bus_clk);
+		goto free_info;
+	}
+	sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
+	if (IS_ERR(sinfo->lcdc_clk)) {
+		ret = PTR_ERR(sinfo->lcdc_clk);
+		goto put_bus_clk;
+	}
+	atmel_lcdfb_start_clock(sinfo);
+
+	modelist = list_first_entry(&info->modelist,
+			struct fb_modelist, list);
+	fb_videomode_to_var(&info->var, &modelist->mode);
+
+	atmel_lcdfb_check_var(&info->var, info);
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs) {
+		dev_err(dev, "resources unusable\n");
+		ret = -ENXIO;
+		goto stop_clk;
+	}
+
+	sinfo->irq_base = platform_get_irq(pdev, 0);
+	if (sinfo->irq_base < 0) {
+		dev_err(dev, "unable to get irq\n");
+		ret = sinfo->irq_base;
+		goto stop_clk;
+	}
+
+	/* Initialize video memory */
+	map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (map) {
+		/* use a pre-allocated memory buffer */
+		info->fix.smem_start = map->start;
+		info->fix.smem_len = resource_size(map);
+		if (!request_mem_region(info->fix.smem_start,
+					info->fix.smem_len, pdev->name)) {
+			ret = -EBUSY;
+			goto stop_clk;
+		}
+
+		info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
+		if (!info->screen_base) {
+			ret = -ENOMEM;
+			goto release_intmem;
+		}
+
+		/*
+		 * Don't clear the framebuffer -- someone may have set
+		 * up a splash image.
+		 */
+	} else {
+		/* allocate memory buffer */
+		ret = atmel_lcdfb_alloc_video_memory(sinfo);
+		if (ret < 0) {
+			dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
+			goto stop_clk;
+		}
+	}
+
+	/* LCDC registers */
+	info->fix.mmio_start = regs->start;
+	info->fix.mmio_len = resource_size(regs);
+
+	if (!request_mem_region(info->fix.mmio_start,
+				info->fix.mmio_len, pdev->name)) {
+		ret = -EBUSY;
+		goto free_fb;
+	}
+
+	sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
+	if (!sinfo->mmio) {
+		dev_err(dev, "cannot map LCDC registers\n");
+		ret = -ENOMEM;
+		goto release_mem;
+	}
+
+	/* Initialize PWM for contrast or backlight ("off") */
+	init_contrast(sinfo);
+
+	/* interrupt */
+	ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
+	if (ret) {
+		dev_err(dev, "request_irq failed: %d\n", ret);
+		goto unmap_mmio;
+	}
+
+	/* Some operations on the LCDC might sleep and
+	 * require a preemptible task context */
+	INIT_WORK(&sinfo->task, atmel_lcdfb_task);
+
+	ret = atmel_lcdfb_init_fbinfo(sinfo);
+	if (ret < 0) {
+		dev_err(dev, "init fbinfo failed: %d\n", ret);
+		goto unregister_irqs;
+	}
+
+	ret = atmel_lcdfb_set_par(info);
+	if (ret < 0) {
+		dev_err(dev, "set par failed: %d\n", ret);
+		goto unregister_irqs;
+	}
+
+	dev_set_drvdata(dev, info);
+
+	/*
+	 * Tell the world that we're ready to go
+	 */
+	ret = register_framebuffer(info);
+	if (ret < 0) {
+		dev_err(dev, "failed to register framebuffer device: %d\n", ret);
+		goto reset_drvdata;
+	}
+
+	/* Power up the LCDC screen */
+	atmel_lcdfb_power_control(sinfo, 1);
+
+	dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %d\n",
+		       info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
+
+	return 0;
+
+reset_drvdata:
+	dev_set_drvdata(dev, NULL);
+	fb_dealloc_cmap(&info->cmap);
+unregister_irqs:
+	cancel_work_sync(&sinfo->task);
+	free_irq(sinfo->irq_base, info);
+unmap_mmio:
+	exit_backlight(sinfo);
+	iounmap(sinfo->mmio);
+release_mem:
+ 	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+free_fb:
+	if (map)
+		iounmap(info->screen_base);
+	else
+		atmel_lcdfb_free_video_memory(sinfo);
+
+release_intmem:
+	if (map)
+		release_mem_region(info->fix.smem_start, info->fix.smem_len);
+stop_clk:
+	atmel_lcdfb_stop_clock(sinfo);
+	clk_put(sinfo->lcdc_clk);
+put_bus_clk:
+	clk_put(sinfo->bus_clk);
+free_info:
+	framebuffer_release(info);
+out:
+	dev_dbg(dev, "%s FAILED\n", __func__);
+	return ret;
+}
+
+static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct atmel_lcdfb_info *sinfo;
+	struct atmel_lcdfb_pdata *pdata;
+
+	if (!info || !info->par)
+		return 0;
+	sinfo = info->par;
+	pdata = &sinfo->pdata;
+
+	cancel_work_sync(&sinfo->task);
+	exit_backlight(sinfo);
+	atmel_lcdfb_power_control(sinfo, 0);
+	unregister_framebuffer(info);
+	atmel_lcdfb_stop_clock(sinfo);
+	clk_put(sinfo->lcdc_clk);
+	clk_put(sinfo->bus_clk);
+	fb_dealloc_cmap(&info->cmap);
+	free_irq(sinfo->irq_base, info);
+	iounmap(sinfo->mmio);
+ 	release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
+	if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
+		iounmap(info->screen_base);
+		release_mem_region(info->fix.smem_start, info->fix.smem_len);
+	} else {
+		atmel_lcdfb_free_video_memory(sinfo);
+	}
+
+	framebuffer_release(info);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int atmel_lcdfb_suspend(struct platform_device *pdev, pm_message_t mesg)
+{
+	struct fb_info *info = platform_get_drvdata(pdev);
+	struct atmel_lcdfb_info *sinfo = info->par;
+
+	/*
+	 * We don't want to handle interrupts while the clock is
+	 * stopped. It may take forever.
+	 */
+	lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
+
+	sinfo->saved_lcdcon = lcdc_readl(sinfo, ATMEL_LCDC_CONTRAST_CTR);
+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, 0);
+	atmel_lcdfb_power_control(sinfo, 0);
+	atmel_lcdfb_stop(sinfo);
+	atmel_lcdfb_stop_clock(sinfo);
+
+	return 0;
+}
+
+static int atmel_lcdfb_resume(struct platform_device *pdev)
+{
+	struct fb_info *info = platform_get_drvdata(pdev);
+	struct atmel_lcdfb_info *sinfo = info->par;
+
+	atmel_lcdfb_start_clock(sinfo);
+	atmel_lcdfb_start(sinfo);
+	atmel_lcdfb_power_control(sinfo, 1);
+	lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, sinfo->saved_lcdcon);
+
+	/* Enable FIFO & DMA errors */
+	lcdc_writel(sinfo, ATMEL_LCDC_IER, ATMEL_LCDC_UFLWI
+			| ATMEL_LCDC_OWRI | ATMEL_LCDC_MERI);
+
+	return 0;
+}
+
+#else
+#define atmel_lcdfb_suspend	NULL
+#define atmel_lcdfb_resume	NULL
+#endif
+
+static struct platform_driver atmel_lcdfb_driver = {
+	.remove		= __exit_p(atmel_lcdfb_remove),
+	.suspend	= atmel_lcdfb_suspend,
+	.resume		= atmel_lcdfb_resume,
+	.id_table	= atmel_lcdfb_devtypes,
+	.driver		= {
+		.name	= "atmel_lcdfb",
+		.of_match_table	= of_match_ptr(atmel_lcdfb_dt_ids),
+	},
+};
+
+module_platform_driver_probe(atmel_lcdfb_driver, atmel_lcdfb_probe);
+
+MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-54-g00ecf