From 03dd4cb26d967f9588437b0fc9cc0e8353322bb7 Mon Sep 17 00:00:00 2001
From: André Fabian Silva Delgado <emulatorman@parabola.nu>
Date: Fri, 25 Mar 2016 03:53:42 -0300
Subject: Linux-libre 4.5-gnu

---
 .../omap2/displays-new/panel-tpo-td028ttec1.c      | 511 ---------------------
 1 file changed, 511 deletions(-)
 delete mode 100644 drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c

(limited to 'drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c')

diff --git a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
deleted file mode 100644
index 4d657f3ab..000000000
--- a/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
+++ /dev/null
@@ -1,511 +0,0 @@
-/*
- * Toppoly TD028TTEC1 panel support
- *
- * Copyright (C) 2008 Nokia Corporation
- * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
- *
- * Neo 1973 code (jbt6k74.c):
- * Copyright (C) 2006-2007 by OpenMoko, Inc.
- * Author: Harald Welte <laforge@openmoko.org>
- *
- * Ported and adapted from Neo 1973 U-Boot by:
- * H. Nikolaus Schaller <hns@goldelico.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-struct panel_drv_data {
-	struct omap_dss_device dssdev;
-	struct omap_dss_device *in;
-
-	int data_lines;
-
-	struct omap_video_timings videomode;
-
-	struct spi_device *spi_dev;
-};
-
-static struct omap_video_timings td028ttec1_panel_timings = {
-	.x_res		= 480,
-	.y_res		= 640,
-	.pixelclock	= 22153000,
-	.hfp		= 24,
-	.hsw		= 8,
-	.hbp		= 8,
-	.vfp		= 4,
-	.vsw		= 2,
-	.vbp		= 2,
-
-	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
-
-	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
-	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
-	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
-};
-
-#define JBT_COMMAND	0x000
-#define JBT_DATA	0x100
-
-static int jbt_ret_write_0(struct panel_drv_data *ddata, u8 reg)
-{
-	int rc;
-	u16 tx_buf = JBT_COMMAND | reg;
-
-	rc = spi_write(ddata->spi_dev, (u8 *)&tx_buf,
-			1*sizeof(u16));
-	if (rc != 0)
-		dev_err(&ddata->spi_dev->dev,
-			"jbt_ret_write_0 spi_write ret %d\n", rc);
-
-	return rc;
-}
-
-static int jbt_reg_write_1(struct panel_drv_data *ddata, u8 reg, u8 data)
-{
-	int rc;
-	u16 tx_buf[2];
-
-	tx_buf[0] = JBT_COMMAND | reg;
-	tx_buf[1] = JBT_DATA | data;
-	rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
-			2*sizeof(u16));
-	if (rc != 0)
-		dev_err(&ddata->spi_dev->dev,
-			"jbt_reg_write_1 spi_write ret %d\n", rc);
-
-	return rc;
-}
-
-static int jbt_reg_write_2(struct panel_drv_data *ddata, u8 reg, u16 data)
-{
-	int rc;
-	u16 tx_buf[3];
-
-	tx_buf[0] = JBT_COMMAND | reg;
-	tx_buf[1] = JBT_DATA | (data >> 8);
-	tx_buf[2] = JBT_DATA | (data & 0xff);
-
-	rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
-			3*sizeof(u16));
-
-	if (rc != 0)
-		dev_err(&ddata->spi_dev->dev,
-			"jbt_reg_write_2 spi_write ret %d\n", rc);
-
-	return rc;
-}
-
-enum jbt_register {
-	JBT_REG_SLEEP_IN		= 0x10,
-	JBT_REG_SLEEP_OUT		= 0x11,
-
-	JBT_REG_DISPLAY_OFF		= 0x28,
-	JBT_REG_DISPLAY_ON		= 0x29,
-
-	JBT_REG_RGB_FORMAT		= 0x3a,
-	JBT_REG_QUAD_RATE		= 0x3b,
-
-	JBT_REG_POWER_ON_OFF		= 0xb0,
-	JBT_REG_BOOSTER_OP		= 0xb1,
-	JBT_REG_BOOSTER_MODE		= 0xb2,
-	JBT_REG_BOOSTER_FREQ		= 0xb3,
-	JBT_REG_OPAMP_SYSCLK		= 0xb4,
-	JBT_REG_VSC_VOLTAGE		= 0xb5,
-	JBT_REG_VCOM_VOLTAGE		= 0xb6,
-	JBT_REG_EXT_DISPL		= 0xb7,
-	JBT_REG_OUTPUT_CONTROL		= 0xb8,
-	JBT_REG_DCCLK_DCEV		= 0xb9,
-	JBT_REG_DISPLAY_MODE1		= 0xba,
-	JBT_REG_DISPLAY_MODE2		= 0xbb,
-	JBT_REG_DISPLAY_MODE		= 0xbc,
-	JBT_REG_ASW_SLEW		= 0xbd,
-	JBT_REG_DUMMY_DISPLAY		= 0xbe,
-	JBT_REG_DRIVE_SYSTEM		= 0xbf,
-
-	JBT_REG_SLEEP_OUT_FR_A		= 0xc0,
-	JBT_REG_SLEEP_OUT_FR_B		= 0xc1,
-	JBT_REG_SLEEP_OUT_FR_C		= 0xc2,
-	JBT_REG_SLEEP_IN_LCCNT_D	= 0xc3,
-	JBT_REG_SLEEP_IN_LCCNT_E	= 0xc4,
-	JBT_REG_SLEEP_IN_LCCNT_F	= 0xc5,
-	JBT_REG_SLEEP_IN_LCCNT_G	= 0xc6,
-
-	JBT_REG_GAMMA1_FINE_1		= 0xc7,
-	JBT_REG_GAMMA1_FINE_2		= 0xc8,
-	JBT_REG_GAMMA1_INCLINATION	= 0xc9,
-	JBT_REG_GAMMA1_BLUE_OFFSET	= 0xca,
-
-	JBT_REG_BLANK_CONTROL		= 0xcf,
-	JBT_REG_BLANK_TH_TV		= 0xd0,
-	JBT_REG_CKV_ON_OFF		= 0xd1,
-	JBT_REG_CKV_1_2			= 0xd2,
-	JBT_REG_OEV_TIMING		= 0xd3,
-	JBT_REG_ASW_TIMING_1		= 0xd4,
-	JBT_REG_ASW_TIMING_2		= 0xd5,
-
-	JBT_REG_HCLOCK_VGA		= 0xec,
-	JBT_REG_HCLOCK_QVGA		= 0xed,
-};
-
-#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
-
-static int td028ttec1_panel_connect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (omapdss_device_is_connected(dssdev))
-		return 0;
-
-	r = in->ops.dpi->connect(in, dssdev);
-	if (r)
-		return r;
-
-	return 0;
-}
-
-static void td028ttec1_panel_disconnect(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return;
-
-	in->ops.dpi->disconnect(in, dssdev);
-}
-
-static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-	int r;
-
-	if (!omapdss_device_is_connected(dssdev))
-		return -ENODEV;
-
-	if (omapdss_device_is_enabled(dssdev))
-		return 0;
-
-	if (ddata->data_lines)
-		in->ops.dpi->set_data_lines(in, ddata->data_lines);
-	in->ops.dpi->set_timings(in, &ddata->videomode);
-
-	r = in->ops.dpi->enable(in);
-	if (r)
-		return r;
-
-	dev_dbg(dssdev->dev, "td028ttec1_panel_enable() - state %d\n",
-		dssdev->state);
-
-	/* three times command zero */
-	r |= jbt_ret_write_0(ddata, 0x00);
-	usleep_range(1000, 2000);
-	r |= jbt_ret_write_0(ddata, 0x00);
-	usleep_range(1000, 2000);
-	r |= jbt_ret_write_0(ddata, 0x00);
-	usleep_range(1000, 2000);
-
-	if (r) {
-		dev_warn(dssdev->dev, "transfer error\n");
-		goto transfer_err;
-	}
-
-	/* deep standby out */
-	r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x17);
-
-	/* RGB I/F on, RAM write off, QVGA through, SIGCON enable */
-	r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE, 0x80);
-
-	/* Quad mode off */
-	r |= jbt_reg_write_1(ddata, JBT_REG_QUAD_RATE, 0x00);
-
-	/* AVDD on, XVDD on */
-	r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x16);
-
-	/* Output control */
-	r |= jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0xfff9);
-
-	/* Sleep mode off */
-	r |= jbt_ret_write_0(ddata, JBT_REG_SLEEP_OUT);
-
-	/* at this point we have like 50% grey */
-
-	/* initialize register set */
-	r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE1, 0x01);
-	r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE2, 0x00);
-	r |= jbt_reg_write_1(ddata, JBT_REG_RGB_FORMAT, 0x60);
-	r |= jbt_reg_write_1(ddata, JBT_REG_DRIVE_SYSTEM, 0x10);
-	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_OP, 0x56);
-	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_MODE, 0x33);
-	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
-	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
-	r |= jbt_reg_write_1(ddata, JBT_REG_OPAMP_SYSCLK, 0x02);
-	r |= jbt_reg_write_1(ddata, JBT_REG_VSC_VOLTAGE, 0x2b);
-	r |= jbt_reg_write_1(ddata, JBT_REG_VCOM_VOLTAGE, 0x40);
-	r |= jbt_reg_write_1(ddata, JBT_REG_EXT_DISPL, 0x03);
-	r |= jbt_reg_write_1(ddata, JBT_REG_DCCLK_DCEV, 0x04);
-	/*
-	 * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
-	 * to avoid red / blue flicker
-	 */
-	r |= jbt_reg_write_1(ddata, JBT_REG_ASW_SLEW, 0x04);
-	r |= jbt_reg_write_1(ddata, JBT_REG_DUMMY_DISPLAY, 0x00);
-
-	r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_A, 0x11);
-	r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_B, 0x11);
-	r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_C, 0x11);
-	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
-	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
-	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
-	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
-
-	r |= jbt_reg_write_2(ddata, JBT_REG_GAMMA1_FINE_1, 0x5533);
-	r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_FINE_2, 0x00);
-	r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_INCLINATION, 0x00);
-	r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
-
-	r |= jbt_reg_write_2(ddata, JBT_REG_HCLOCK_VGA, 0x1f0);
-	r |= jbt_reg_write_1(ddata, JBT_REG_BLANK_CONTROL, 0x02);
-	r |= jbt_reg_write_2(ddata, JBT_REG_BLANK_TH_TV, 0x0804);
-
-	r |= jbt_reg_write_1(ddata, JBT_REG_CKV_ON_OFF, 0x01);
-	r |= jbt_reg_write_2(ddata, JBT_REG_CKV_1_2, 0x0000);
-
-	r |= jbt_reg_write_2(ddata, JBT_REG_OEV_TIMING, 0x0d0e);
-	r |= jbt_reg_write_2(ddata, JBT_REG_ASW_TIMING_1, 0x11a4);
-	r |= jbt_reg_write_1(ddata, JBT_REG_ASW_TIMING_2, 0x0e);
-
-	r |= jbt_ret_write_0(ddata, JBT_REG_DISPLAY_ON);
-
-	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
-
-transfer_err:
-
-	return r ? -EIO : 0;
-}
-
-static void td028ttec1_panel_disable(struct omap_dss_device *dssdev)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	if (!omapdss_device_is_enabled(dssdev))
-		return;
-
-	dev_dbg(dssdev->dev, "td028ttec1_panel_disable()\n");
-
-	jbt_ret_write_0(ddata, JBT_REG_DISPLAY_OFF);
-	jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0x8002);
-	jbt_ret_write_0(ddata, JBT_REG_SLEEP_IN);
-	jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x00);
-
-	in->ops.dpi->disable(in);
-
-	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
-}
-
-static void td028ttec1_panel_set_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	ddata->videomode = *timings;
-	dssdev->panel.timings = *timings;
-
-	in->ops.dpi->set_timings(in, timings);
-}
-
-static void td028ttec1_panel_get_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-
-	*timings = ddata->videomode;
-}
-
-static int td028ttec1_panel_check_timings(struct omap_dss_device *dssdev,
-		struct omap_video_timings *timings)
-{
-	struct panel_drv_data *ddata = to_panel_data(dssdev);
-	struct omap_dss_device *in = ddata->in;
-
-	return in->ops.dpi->check_timings(in, timings);
-}
-
-static struct omap_dss_driver td028ttec1_ops = {
-	.connect	= td028ttec1_panel_connect,
-	.disconnect	= td028ttec1_panel_disconnect,
-
-	.enable		= td028ttec1_panel_enable,
-	.disable	= td028ttec1_panel_disable,
-
-	.set_timings	= td028ttec1_panel_set_timings,
-	.get_timings	= td028ttec1_panel_get_timings,
-	.check_timings	= td028ttec1_panel_check_timings,
-};
-
-static int td028ttec1_panel_probe_pdata(struct spi_device *spi)
-{
-	const struct panel_tpo_td028ttec1_platform_data *pdata;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev, *in;
-
-	pdata = dev_get_platdata(&spi->dev);
-
-	in = omap_dss_find_output(pdata->source);
-	if (in == NULL) {
-		dev_err(&spi->dev, "failed to find video source '%s'\n",
-				pdata->source);
-		return -EPROBE_DEFER;
-	}
-
-	ddata->in = in;
-
-	ddata->data_lines = pdata->data_lines;
-
-	dssdev = &ddata->dssdev;
-	dssdev->name = pdata->name;
-
-	return 0;
-}
-
-static int td028ttec1_probe_of(struct spi_device *spi)
-{
-	struct device_node *node = spi->dev.of_node;
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *in;
-
-	in = omapdss_of_find_source_for_first_ep(node);
-	if (IS_ERR(in)) {
-		dev_err(&spi->dev, "failed to find video source\n");
-		return PTR_ERR(in);
-	}
-
-	ddata->in = in;
-
-	return 0;
-}
-
-static int td028ttec1_panel_probe(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata;
-	struct omap_dss_device *dssdev;
-	int r;
-
-	dev_dbg(&spi->dev, "%s\n", __func__);
-
-	spi->bits_per_word = 9;
-	spi->mode = SPI_MODE_3;
-
-	r = spi_setup(spi);
-	if (r < 0) {
-		dev_err(&spi->dev, "spi_setup failed: %d\n", r);
-		return r;
-	}
-
-	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
-	if (ddata == NULL)
-		return -ENOMEM;
-
-	dev_set_drvdata(&spi->dev, ddata);
-
-	ddata->spi_dev = spi;
-
-	if (dev_get_platdata(&spi->dev)) {
-		r = td028ttec1_panel_probe_pdata(spi);
-		if (r)
-			return r;
-	} else if (spi->dev.of_node) {
-		r = td028ttec1_probe_of(spi);
-		if (r)
-			return r;
-	} else {
-		return -ENODEV;
-	}
-
-	ddata->videomode = td028ttec1_panel_timings;
-
-	dssdev = &ddata->dssdev;
-	dssdev->dev = &spi->dev;
-	dssdev->driver = &td028ttec1_ops;
-	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
-	dssdev->owner = THIS_MODULE;
-	dssdev->panel.timings = ddata->videomode;
-	dssdev->phy.dpi.data_lines = ddata->data_lines;
-
-	r = omapdss_register_display(dssdev);
-	if (r) {
-		dev_err(&spi->dev, "Failed to register panel\n");
-		goto err_reg;
-	}
-
-	return 0;
-
-err_reg:
-	omap_dss_put_device(ddata->in);
-	return r;
-}
-
-static int td028ttec1_panel_remove(struct spi_device *spi)
-{
-	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
-	struct omap_dss_device *dssdev = &ddata->dssdev;
-	struct omap_dss_device *in = ddata->in;
-
-	dev_dbg(&ddata->spi_dev->dev, "%s\n", __func__);
-
-	omapdss_unregister_display(dssdev);
-
-	td028ttec1_panel_disable(dssdev);
-	td028ttec1_panel_disconnect(dssdev);
-
-	omap_dss_put_device(in);
-
-	return 0;
-}
-
-static const struct of_device_id td028ttec1_of_match[] = {
-	{ .compatible = "omapdss,toppoly,td028ttec1", },
-	{},
-};
-
-MODULE_DEVICE_TABLE(of, td028ttec1_of_match);
-
-static struct spi_driver td028ttec1_spi_driver = {
-	.probe		= td028ttec1_panel_probe,
-	.remove		= td028ttec1_panel_remove,
-
-	.driver         = {
-		.name   = "panel-tpo-td028ttec1",
-		.of_match_table = td028ttec1_of_match,
-		.suppress_bind_attrs = true,
-	},
-};
-
-module_spi_driver(td028ttec1_spi_driver);
-
-MODULE_ALIAS("spi:toppoly,td028ttec1");
-MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
-MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
-MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-54-g00ecf