From 03dd4cb26d967f9588437b0fc9cc0e8353322bb7 Mon Sep 17 00:00:00 2001
From: André Fabian Silva Delgado <emulatorman@parabola.nu>
Date: Fri, 25 Mar 2016 03:53:42 -0300
Subject: Linux-libre 4.5-gnu

---
 drivers/video/fbdev/omap2/omapfb/displays/Kconfig  |   86 ++
 drivers/video/fbdev/omap2/omapfb/displays/Makefile |   14 +
 .../omap2/omapfb/displays/connector-analog-tv.c    |  320 +++++
 .../fbdev/omap2/omapfb/displays/connector-dvi.c    |  398 ++++++
 .../fbdev/omap2/omapfb/displays/connector-hdmi.c   |  348 +++++
 .../fbdev/omap2/omapfb/displays/encoder-opa362.c   |  278 ++++
 .../fbdev/omap2/omapfb/displays/encoder-tfp410.c   |  320 +++++
 .../omap2/omapfb/displays/encoder-tpd12s015.c      |  328 +++++
 .../video/fbdev/omap2/omapfb/displays/panel-dpi.c  |  328 +++++
 .../fbdev/omap2/omapfb/displays/panel-dsi-cm.c     | 1388 ++++++++++++++++++++
 .../omapfb/displays/panel-lgphilips-lb035q02.c     |  404 ++++++
 .../omap2/omapfb/displays/panel-nec-nl8048hl11.c   |  437 ++++++
 .../omapfb/displays/panel-sharp-ls037v7dw01.c      |  415 ++++++
 .../omap2/omapfb/displays/panel-sony-acx565akm.c   |  917 +++++++++++++
 .../omap2/omapfb/displays/panel-tpo-td028ttec1.c   |  511 +++++++
 .../omap2/omapfb/displays/panel-tpo-td043mtea1.c   |  686 ++++++++++
 16 files changed, 7178 insertions(+)
 create mode 100644 drivers/video/fbdev/omap2/omapfb/displays/Kconfig
 create mode 100644 drivers/video/fbdev/omap2/omapfb/displays/Makefile
 create mode 100644 drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c
 create mode 100644 drivers/video/fbdev/omap2/omapfb/displays/connector-dvi.c
 create mode 100644 drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c
 create mode 100644 drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c
 create mode 100644 drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c
 create mode 100644 drivers/video/fbdev/omap2/omapfb/displays/encoder-tpd12s015.c
 create mode 100644 drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c
 create mode 100644 drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
 create mode 100644 drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c
 create mode 100644 drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c
 create mode 100644 drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c
 create mode 100644 drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
 create mode 100644 drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c
 create mode 100644 drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c

(limited to 'drivers/video/fbdev/omap2/omapfb/displays')

diff --git a/drivers/video/fbdev/omap2/omapfb/displays/Kconfig b/drivers/video/fbdev/omap2/omapfb/displays/Kconfig
new file mode 100644
index 000000000..08f12039d
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/Kconfig
@@ -0,0 +1,86 @@
+menu "OMAPFB Panel and Encoder Drivers"
+        depends on FB_OMAP2_DSS
+
+config FB_OMAP2_ENCODER_OPA362
+	tristate "OPA362 external analog amplifier"
+	help
+	  Driver for OPA362 external analog TV amplifier controlled
+	  through a GPIO.
+
+config FB_OMAP2_ENCODER_TFP410
+        tristate "TFP410 DPI to DVI Encoder"
+	help
+	  Driver for TFP410 DPI to DVI encoder.
+
+config FB_OMAP2_ENCODER_TPD12S015
+        tristate "TPD12S015 HDMI ESD protection and level shifter"
+	help
+	  Driver for TPD12S015, which offers HDMI ESD protection and level
+	  shifting.
+
+config FB_OMAP2_CONNECTOR_DVI
+        tristate "DVI Connector"
+	depends on I2C
+	help
+	  Driver for a generic DVI connector.
+
+config FB_OMAP2_CONNECTOR_HDMI
+        tristate "HDMI Connector"
+	help
+	  Driver for a generic HDMI connector.
+
+config FB_OMAP2_CONNECTOR_ANALOG_TV
+        tristate "Analog TV Connector"
+	help
+	  Driver for a generic analog TV connector.
+
+config FB_OMAP2_PANEL_DPI
+	tristate "Generic DPI panel"
+	help
+	  Driver for generic DPI panels.
+
+config FB_OMAP2_PANEL_DSI_CM
+	tristate "Generic DSI Command Mode Panel"
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Driver for generic DSI command mode panels.
+
+config FB_OMAP2_PANEL_SONY_ACX565AKM
+	tristate "ACX565AKM Panel"
+	depends on SPI && BACKLIGHT_CLASS_DEVICE
+	help
+	  This is the LCD panel used on Nokia N900
+
+config FB_OMAP2_PANEL_LGPHILIPS_LB035Q02
+	tristate "LG.Philips LB035Q02 LCD Panel"
+	depends on SPI
+	help
+	  LCD Panel used on the Gumstix Overo Palo35
+
+config FB_OMAP2_PANEL_SHARP_LS037V7DW01
+        tristate "Sharp LS037V7DW01 LCD Panel"
+        depends on BACKLIGHT_CLASS_DEVICE
+        help
+          LCD Panel used in TI's SDP3430 and EVM boards
+
+config FB_OMAP2_PANEL_TPO_TD028TTEC1
+        tristate "TPO TD028TTEC1 LCD Panel"
+        depends on SPI
+        help
+          LCD panel used in Openmoko.
+
+config FB_OMAP2_PANEL_TPO_TD043MTEA1
+        tristate "TPO TD043MTEA1 LCD Panel"
+        depends on SPI
+        help
+          LCD Panel used in OMAP3 Pandora
+
+config FB_OMAP2_PANEL_NEC_NL8048HL11
+	tristate "NEC NL8048HL11 Panel"
+	depends on SPI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+		This NEC NL8048HL11 panel is TFT LCD used in the
+		Zoom2/3/3630 sdp boards.
+
+endmenu
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/Makefile b/drivers/video/fbdev/omap2/omapfb/displays/Makefile
new file mode 100644
index 000000000..4f7459272
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/Makefile
@@ -0,0 +1,14 @@
+obj-$(CONFIG_FB_OMAP2_ENCODER_OPA362) += encoder-opa362.o
+obj-$(CONFIG_FB_OMAP2_ENCODER_TFP410) += encoder-tfp410.o
+obj-$(CONFIG_FB_OMAP2_ENCODER_TPD12S015) += encoder-tpd12s015.o
+obj-$(CONFIG_FB_OMAP2_CONNECTOR_DVI) += connector-dvi.o
+obj-$(CONFIG_FB_OMAP2_CONNECTOR_HDMI) += connector-hdmi.o
+obj-$(CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV) += connector-analog-tv.o
+obj-$(CONFIG_FB_OMAP2_PANEL_DPI) += panel-dpi.o
+obj-$(CONFIG_FB_OMAP2_PANEL_DSI_CM) += panel-dsi-cm.o
+obj-$(CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
+obj-$(CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
+obj-$(CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
+obj-$(CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
+obj-$(CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
+obj-$(CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c b/drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c
new file mode 100644
index 000000000..8511c648a
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/connector-analog-tv.c
@@ -0,0 +1,320 @@
+/*
+ * Analog TV Connector driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct device *dev;
+
+	struct omap_video_timings timings;
+
+	enum omap_dss_venc_type connector_type;
+	bool invert_polarity;
+};
+
+static const struct omap_video_timings tvc_pal_timings = {
+	.x_res		= 720,
+	.y_res		= 574,
+	.pixelclock	= 13500000,
+	.hsw		= 64,
+	.hfp		= 12,
+	.hbp		= 68,
+	.vsw		= 5,
+	.vfp		= 5,
+	.vbp		= 41,
+
+	.interlace	= true,
+};
+
+static const struct of_device_id tvc_of_match[];
+
+struct tvc_of_data {
+	enum omap_dss_venc_type connector_type;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int tvc_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(ddata->dev, "connect\n");
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.atv->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void tvc_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(ddata->dev, "disconnect\n");
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.atv->disconnect(in, dssdev);
+}
+
+static int tvc_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(ddata->dev, "enable\n");
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.atv->set_timings(in, &ddata->timings);
+
+	if (!ddata->dev->of_node) {
+		in->ops.atv->set_type(in, ddata->connector_type);
+
+		in->ops.atv->invert_vid_out_polarity(in,
+			ddata->invert_polarity);
+	}
+
+	r = in->ops.atv->enable(in);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return r;
+}
+
+static void tvc_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(ddata->dev, "disable\n");
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	in->ops.atv->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void tvc_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.atv->set_timings(in, timings);
+}
+
+static void tvc_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->timings;
+}
+
+static int tvc_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.atv->check_timings(in, timings);
+}
+
+static u32 tvc_get_wss(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.atv->get_wss(in);
+}
+
+static int tvc_set_wss(struct omap_dss_device *dssdev, u32 wss)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.atv->set_wss(in, wss);
+}
+
+static struct omap_dss_driver tvc_driver = {
+	.connect		= tvc_connect,
+	.disconnect		= tvc_disconnect,
+
+	.enable			= tvc_enable,
+	.disable		= tvc_disable,
+
+	.set_timings		= tvc_set_timings,
+	.get_timings		= tvc_get_timings,
+	.check_timings		= tvc_check_timings,
+
+	.get_resolution		= omapdss_default_get_resolution,
+
+	.get_wss		= tvc_get_wss,
+	.set_wss		= tvc_set_wss,
+};
+
+static int tvc_probe_pdata(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct connector_atv_platform_data *pdata;
+	struct omap_dss_device *in, *dssdev;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "Failed to find video source\n");
+		return -EPROBE_DEFER;
+	}
+
+	ddata->in = in;
+
+	ddata->connector_type = pdata->connector_type;
+	ddata->invert_polarity = pdata->invert_polarity;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int tvc_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int tvc_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+	ddata->dev = &pdev->dev;
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = tvc_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else if (pdev->dev.of_node) {
+		r = tvc_probe_of(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	ddata->timings = tvc_pal_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->driver = &tvc_driver;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_VENC;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = tvc_pal_timings;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+err_reg:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit tvc_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(&ddata->dssdev);
+
+	tvc_disable(dssdev);
+	tvc_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id tvc_of_match[] = {
+	{ .compatible = "omapdss,svideo-connector", },
+	{ .compatible = "omapdss,composite-video-connector", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, tvc_of_match);
+
+static struct platform_driver tvc_connector_driver = {
+	.probe	= tvc_probe,
+	.remove	= __exit_p(tvc_remove),
+	.driver	= {
+		.name	= "connector-analog-tv",
+		.of_match_table = tvc_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(tvc_connector_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Analog TV Connector driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/connector-dvi.c b/drivers/video/fbdev/omap2/omapfb/displays/connector-dvi.c
new file mode 100644
index 000000000..d811e6dca
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/connector-dvi.c
@@ -0,0 +1,398 @@
+/*
+ * Generic DVI Connector driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <drm/drm_edid.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+static const struct omap_video_timings dvic_default_timings = {
+	.x_res		= 640,
+	.y_res		= 480,
+
+	.pixelclock	= 23500000,
+
+	.hfp		= 48,
+	.hsw		= 32,
+	.hbp		= 80,
+
+	.vfp		= 3,
+	.vsw		= 4,
+	.vbp		= 7,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
+};
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct omap_video_timings timings;
+
+	struct i2c_adapter *i2c_adapter;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int dvic_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dvi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void dvic_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dvi->disconnect(in, dssdev);
+}
+
+static int dvic_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.dvi->set_timings(in, &ddata->timings);
+
+	r = in->ops.dvi->enable(in);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void dvic_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	in->ops.dvi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void dvic_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dvi->set_timings(in, timings);
+}
+
+static void dvic_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->timings;
+}
+
+static int dvic_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dvi->check_timings(in, timings);
+}
+
+static int dvic_ddc_read(struct i2c_adapter *adapter,
+		unsigned char *buf, u16 count, u8 offset)
+{
+	int r, retries;
+
+	for (retries = 3; retries > 0; retries--) {
+		struct i2c_msg msgs[] = {
+			{
+				.addr   = DDC_ADDR,
+				.flags  = 0,
+				.len    = 1,
+				.buf    = &offset,
+			}, {
+				.addr   = DDC_ADDR,
+				.flags  = I2C_M_RD,
+				.len    = count,
+				.buf    = buf,
+			}
+		};
+
+		r = i2c_transfer(adapter, msgs, 2);
+		if (r == 2)
+			return 0;
+
+		if (r != -EAGAIN)
+			break;
+	}
+
+	return r < 0 ? r : -EIO;
+}
+
+static int dvic_read_edid(struct omap_dss_device *dssdev,
+		u8 *edid, int len)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	int r, l, bytes_read;
+
+	if (!ddata->i2c_adapter)
+		return -ENODEV;
+
+	l = min(EDID_LENGTH, len);
+	r = dvic_ddc_read(ddata->i2c_adapter, edid, l, 0);
+	if (r)
+		return r;
+
+	bytes_read = l;
+
+	/* if there are extensions, read second block */
+	if (len > EDID_LENGTH && edid[0x7e] > 0) {
+		l = min(EDID_LENGTH, len - EDID_LENGTH);
+
+		r = dvic_ddc_read(ddata->i2c_adapter, edid + EDID_LENGTH,
+				l, EDID_LENGTH);
+		if (r)
+			return r;
+
+		bytes_read += l;
+	}
+
+	return bytes_read;
+}
+
+static bool dvic_detect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	unsigned char out;
+	int r;
+
+	if (!ddata->i2c_adapter)
+		return true;
+
+	r = dvic_ddc_read(ddata->i2c_adapter, &out, 1, 0);
+
+	return r == 0;
+}
+
+static struct omap_dss_driver dvic_driver = {
+	.connect	= dvic_connect,
+	.disconnect	= dvic_disconnect,
+
+	.enable		= dvic_enable,
+	.disable	= dvic_disable,
+
+	.set_timings	= dvic_set_timings,
+	.get_timings	= dvic_get_timings,
+	.check_timings	= dvic_check_timings,
+
+	.get_resolution	= omapdss_default_get_resolution,
+
+	.read_edid	= dvic_read_edid,
+	.detect		= dvic_detect,
+};
+
+static int dvic_probe_pdata(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct connector_dvi_platform_data *pdata;
+	struct omap_dss_device *in, *dssdev;
+	int i2c_bus_num;
+
+	pdata = dev_get_platdata(&pdev->dev);
+	i2c_bus_num = pdata->i2c_bus_num;
+
+	if (i2c_bus_num != -1) {
+		struct i2c_adapter *adapter;
+
+		adapter = i2c_get_adapter(i2c_bus_num);
+		if (!adapter) {
+			dev_err(&pdev->dev,
+					"Failed to get I2C adapter, bus %d\n",
+					i2c_bus_num);
+			return -EPROBE_DEFER;
+		}
+
+		ddata->i2c_adapter = adapter;
+	}
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		i2c_put_adapter(ddata->i2c_adapter);
+
+		dev_err(&pdev->dev, "Failed to find video source\n");
+		return -EPROBE_DEFER;
+	}
+
+	ddata->in = in;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int dvic_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	struct device_node *adapter_node;
+	struct i2c_adapter *adapter;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	adapter_node = of_parse_phandle(node, "ddc-i2c-bus", 0);
+	if (adapter_node) {
+		adapter = of_get_i2c_adapter_by_node(adapter_node);
+		if (adapter == NULL) {
+			dev_err(&pdev->dev, "failed to parse ddc-i2c-bus\n");
+			omap_dss_put_device(ddata->in);
+			return -EPROBE_DEFER;
+		}
+
+		ddata->i2c_adapter = adapter;
+	}
+
+	return 0;
+}
+
+static int dvic_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = dvic_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else if (pdev->dev.of_node) {
+		r = dvic_probe_of(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	ddata->timings = dvic_default_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->driver = &dvic_driver;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_DVI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = dvic_default_timings;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+	omap_dss_put_device(ddata->in);
+
+	i2c_put_adapter(ddata->i2c_adapter);
+
+	return r;
+}
+
+static int __exit dvic_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(&ddata->dssdev);
+
+	dvic_disable(dssdev);
+	dvic_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	i2c_put_adapter(ddata->i2c_adapter);
+
+	return 0;
+}
+
+static const struct of_device_id dvic_of_match[] = {
+	{ .compatible = "omapdss,dvi-connector", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, dvic_of_match);
+
+static struct platform_driver dvi_connector_driver = {
+	.probe	= dvic_probe,
+	.remove	= __exit_p(dvic_remove),
+	.driver	= {
+		.name	= "connector-dvi",
+		.of_match_table = dvic_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(dvi_connector_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Generic DVI Connector driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c b/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c
new file mode 100644
index 000000000..6ee4129bc
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/connector-hdmi.c
@@ -0,0 +1,348 @@
+/*
+ * HDMI Connector driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+
+#include <drm/drm_edid.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+static const struct omap_video_timings hdmic_default_timings = {
+	.x_res		= 640,
+	.y_res		= 480,
+	.pixelclock	= 25175000,
+	.hsw		= 96,
+	.hfp		= 16,
+	.hbp		= 48,
+	.vsw		= 2,
+	.vfp		= 11,
+	.vbp		= 31,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+
+	.interlace	= false,
+};
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct device *dev;
+
+	struct omap_video_timings timings;
+
+	int hpd_gpio;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int hdmic_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(ddata->dev, "connect\n");
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.hdmi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void hdmic_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(ddata->dev, "disconnect\n");
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.hdmi->disconnect(in, dssdev);
+}
+
+static int hdmic_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(ddata->dev, "enable\n");
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.hdmi->set_timings(in, &ddata->timings);
+
+	r = in->ops.hdmi->enable(in);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return r;
+}
+
+static void hdmic_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(ddata->dev, "disable\n");
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	in->ops.hdmi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void hdmic_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.hdmi->set_timings(in, timings);
+}
+
+static void hdmic_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->timings;
+}
+
+static int hdmic_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->check_timings(in, timings);
+}
+
+static int hdmic_read_edid(struct omap_dss_device *dssdev,
+		u8 *edid, int len)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->read_edid(in, edid, len);
+}
+
+static bool hdmic_detect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (gpio_is_valid(ddata->hpd_gpio))
+		return gpio_get_value_cansleep(ddata->hpd_gpio);
+	else
+		return in->ops.hdmi->detect(in);
+}
+
+static int hdmic_set_hdmi_mode(struct omap_dss_device *dssdev, bool hdmi_mode)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->set_hdmi_mode(in, hdmi_mode);
+}
+
+static int hdmic_set_infoframe(struct omap_dss_device *dssdev,
+		const struct hdmi_avi_infoframe *avi)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->set_infoframe(in, avi);
+}
+
+static struct omap_dss_driver hdmic_driver = {
+	.connect		= hdmic_connect,
+	.disconnect		= hdmic_disconnect,
+
+	.enable			= hdmic_enable,
+	.disable		= hdmic_disable,
+
+	.set_timings		= hdmic_set_timings,
+	.get_timings		= hdmic_get_timings,
+	.check_timings		= hdmic_check_timings,
+
+	.get_resolution		= omapdss_default_get_resolution,
+
+	.read_edid		= hdmic_read_edid,
+	.detect			= hdmic_detect,
+	.set_hdmi_mode		= hdmic_set_hdmi_mode,
+	.set_hdmi_infoframe	= hdmic_set_infoframe,
+};
+
+static int hdmic_probe_pdata(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct connector_hdmi_platform_data *pdata;
+	struct omap_dss_device *in, *dssdev;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	ddata->hpd_gpio = -ENODEV;
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "Failed to find video source\n");
+		return -EPROBE_DEFER;
+	}
+
+	ddata->in = in;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int hdmic_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	int gpio;
+
+	/* HPD GPIO */
+	gpio = of_get_named_gpio(node, "hpd-gpios", 0);
+	if (gpio_is_valid(gpio))
+		ddata->hpd_gpio = gpio;
+	else
+		ddata->hpd_gpio = -ENODEV;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int hdmic_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+	ddata->dev = &pdev->dev;
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = hdmic_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else if (pdev->dev.of_node) {
+		r = hdmic_probe_of(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	if (gpio_is_valid(ddata->hpd_gpio)) {
+		r = devm_gpio_request_one(&pdev->dev, ddata->hpd_gpio,
+				GPIOF_DIR_IN, "hdmi_hpd");
+		if (r)
+			goto err_reg;
+	}
+
+	ddata->timings = hdmic_default_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->driver = &hdmic_driver;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = hdmic_default_timings;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+err_reg:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit hdmic_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(&ddata->dssdev);
+
+	hdmic_disable(dssdev);
+	hdmic_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id hdmic_of_match[] = {
+	{ .compatible = "omapdss,hdmi-connector", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, hdmic_of_match);
+
+static struct platform_driver hdmi_connector_driver = {
+	.probe	= hdmic_probe,
+	.remove	= __exit_p(hdmic_remove),
+	.driver	= {
+		.name	= "connector-hdmi",
+		.of_match_table = hdmic_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(hdmi_connector_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("HDMI Connector driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c b/drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c
new file mode 100644
index 000000000..8c246c213
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/encoder-opa362.c
@@ -0,0 +1,278 @@
+/*
+ * OPA362 analog video amplifier with output/power control
+ *
+ * Copyright (C) 2014 Golden Delicious Computers
+ * Author: H. Nikolaus Schaller <hns@goldelico.com>
+ *
+ * based on encoder-tfp410
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of_gpio.h>
+
+#include <video/omapdss.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct gpio_desc *enable_gpio;
+
+	struct omap_video_timings timings;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int opa362_connect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(dssdev->dev, "connect\n");
+
+	if (omapdss_device_is_connected(dssdev))
+		return -EBUSY;
+
+	r = in->ops.atv->connect(in, dssdev);
+	if (r)
+		return r;
+
+	dst->src = dssdev;
+	dssdev->dst = dst;
+
+	return 0;
+}
+
+static void opa362_disconnect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "disconnect\n");
+
+	WARN_ON(!omapdss_device_is_connected(dssdev));
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	WARN_ON(dst != dssdev->dst);
+	if (dst != dssdev->dst)
+		return;
+
+	dst->src = NULL;
+	dssdev->dst = NULL;
+
+	in->ops.atv->disconnect(in, &ddata->dssdev);
+}
+
+static int opa362_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(dssdev->dev, "enable\n");
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.atv->set_timings(in, &ddata->timings);
+
+	r = in->ops.atv->enable(in);
+	if (r)
+		return r;
+
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void opa362_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "disable\n");
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 0);
+
+	in->ops.atv->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void opa362_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "set_timings\n");
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.atv->set_timings(in, timings);
+}
+
+static void opa362_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	dev_dbg(dssdev->dev, "get_timings\n");
+
+	*timings = ddata->timings;
+}
+
+static int opa362_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "check_timings\n");
+
+	return in->ops.atv->check_timings(in, timings);
+}
+
+static void opa362_set_type(struct omap_dss_device *dssdev,
+		enum omap_dss_venc_type type)
+{
+	/* we can only drive a COMPOSITE output */
+	WARN_ON(type != OMAP_DSS_VENC_TYPE_COMPOSITE);
+
+}
+
+static const struct omapdss_atv_ops opa362_atv_ops = {
+	.connect	= opa362_connect,
+	.disconnect	= opa362_disconnect,
+
+	.enable		= opa362_enable,
+	.disable	= opa362_disable,
+
+	.check_timings	= opa362_check_timings,
+	.set_timings	= opa362_set_timings,
+	.get_timings	= opa362_get_timings,
+
+	.set_type	= opa362_set_type,
+};
+
+static int opa362_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev, *in;
+	struct gpio_desc *gpio;
+	int r;
+
+	dev_dbg(&pdev->dev, "probe\n");
+
+	if (node == NULL) {
+		dev_err(&pdev->dev, "Unable to find device tree\n");
+		return -EINVAL;
+	}
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	gpio = devm_gpiod_get_optional(&pdev->dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio))
+		return PTR_ERR(gpio);
+
+	ddata->enable_gpio = gpio;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	dssdev = &ddata->dssdev;
+	dssdev->ops.atv = &opa362_atv_ops;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_VENC;
+	dssdev->output_type = OMAP_DISPLAY_TYPE_VENC;
+	dssdev->owner = THIS_MODULE;
+
+	r = omapdss_register_output(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register output\n");
+		goto err_reg;
+	}
+
+	return 0;
+err_reg:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit opa362_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_output(&ddata->dssdev);
+
+	WARN_ON(omapdss_device_is_enabled(dssdev));
+	if (omapdss_device_is_enabled(dssdev))
+		opa362_disable(dssdev);
+
+	WARN_ON(omapdss_device_is_connected(dssdev));
+	if (omapdss_device_is_connected(dssdev))
+		opa362_disconnect(dssdev, dssdev->dst);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id opa362_of_match[] = {
+	{ .compatible = "omapdss,ti,opa362", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, opa362_of_match);
+
+static struct platform_driver opa362_driver = {
+	.probe	= opa362_probe,
+	.remove	= __exit_p(opa362_remove),
+	.driver	= {
+		.name	= "amplifier-opa362",
+		.of_match_table = opa362_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(opa362_driver);
+
+MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
+MODULE_DESCRIPTION("OPA362 analog video amplifier with output/power control");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c b/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c
new file mode 100644
index 000000000..d9048b3df
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/encoder-tfp410.c
@@ -0,0 +1,320 @@
+/*
+ * TFP410 DPI-to-DVI encoder driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of_gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	int pd_gpio;
+	int data_lines;
+
+	struct omap_video_timings timings;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int tfp410_connect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return -EBUSY;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	dst->src = dssdev;
+	dssdev->dst = dst;
+
+	return 0;
+}
+
+static void tfp410_disconnect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	WARN_ON(!omapdss_device_is_connected(dssdev));
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	WARN_ON(dst != dssdev->dst);
+	if (dst != dssdev->dst)
+		return;
+
+	dst->src = NULL;
+	dssdev->dst = NULL;
+
+	in->ops.dpi->disconnect(in, &ddata->dssdev);
+}
+
+static int tfp410_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.dpi->set_timings(in, &ddata->timings);
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	if (gpio_is_valid(ddata->pd_gpio))
+		gpio_set_value_cansleep(ddata->pd_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void tfp410_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (gpio_is_valid(ddata->pd_gpio))
+		gpio_set_value_cansleep(ddata->pd_gpio, 0);
+
+	in->ops.dpi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void tfp410_fix_timings(struct omap_video_timings *timings)
+{
+	timings->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
+	timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
+	timings->de_level = OMAPDSS_SIG_ACTIVE_HIGH;
+}
+
+static void tfp410_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	tfp410_fix_timings(timings);
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void tfp410_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->timings;
+}
+
+static int tfp410_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	tfp410_fix_timings(timings);
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static const struct omapdss_dvi_ops tfp410_dvi_ops = {
+	.connect	= tfp410_connect,
+	.disconnect	= tfp410_disconnect,
+
+	.enable		= tfp410_enable,
+	.disable	= tfp410_disable,
+
+	.check_timings	= tfp410_check_timings,
+	.set_timings	= tfp410_set_timings,
+	.get_timings	= tfp410_get_timings,
+};
+
+static int tfp410_probe_pdata(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct encoder_tfp410_platform_data *pdata;
+	struct omap_dss_device *dssdev, *in;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	ddata->pd_gpio = pdata->power_down_gpio;
+
+	ddata->data_lines = pdata->data_lines;
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "Failed to find video source\n");
+		return -ENODEV;
+	}
+
+	ddata->in = in;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int tfp410_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	int gpio;
+
+	gpio = of_get_named_gpio(node, "powerdown-gpios", 0);
+
+	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
+		ddata->pd_gpio = gpio;
+	} else {
+		dev_err(&pdev->dev, "failed to parse PD gpio\n");
+		return gpio;
+	}
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int tfp410_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = tfp410_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else if (pdev->dev.of_node) {
+		r = tfp410_probe_of(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	if (gpio_is_valid(ddata->pd_gpio)) {
+		r = devm_gpio_request_one(&pdev->dev, ddata->pd_gpio,
+				GPIOF_OUT_INIT_LOW, "tfp410 PD");
+		if (r) {
+			dev_err(&pdev->dev, "Failed to request PD GPIO %d\n",
+					ddata->pd_gpio);
+			goto err_gpio;
+		}
+	}
+
+	dssdev = &ddata->dssdev;
+	dssdev->ops.dvi = &tfp410_dvi_ops;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->output_type = OMAP_DISPLAY_TYPE_DVI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->phy.dpi.data_lines = ddata->data_lines;
+	dssdev->port_num = 1;
+
+	r = omapdss_register_output(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register output\n");
+		goto err_reg;
+	}
+
+	return 0;
+err_reg:
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit tfp410_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_output(&ddata->dssdev);
+
+	WARN_ON(omapdss_device_is_enabled(dssdev));
+	if (omapdss_device_is_enabled(dssdev))
+		tfp410_disable(dssdev);
+
+	WARN_ON(omapdss_device_is_connected(dssdev));
+	if (omapdss_device_is_connected(dssdev))
+		tfp410_disconnect(dssdev, dssdev->dst);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id tfp410_of_match[] = {
+	{ .compatible = "omapdss,ti,tfp410", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, tfp410_of_match);
+
+static struct platform_driver tfp410_driver = {
+	.probe	= tfp410_probe,
+	.remove	= __exit_p(tfp410_remove),
+	.driver	= {
+		.name	= "tfp410",
+		.of_match_table = tfp410_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(tfp410_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("TFP410 DPI to DVI encoder driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/encoder-tpd12s015.c b/drivers/video/fbdev/omap2/omapfb/displays/encoder-tpd12s015.c
new file mode 100644
index 000000000..677e2545f
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/encoder-tpd12s015.c
@@ -0,0 +1,328 @@
+/*
+ * TPD12S015 HDMI ESD protection & level shifter chip driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct gpio_desc *ct_cp_hpd_gpio;
+	struct gpio_desc *ls_oe_gpio;
+	struct gpio_desc *hpd_gpio;
+
+	struct omap_video_timings timings;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int tpd_connect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	r = in->ops.hdmi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	dst->src = dssdev;
+	dssdev->dst = dst;
+
+	if (ddata->ct_cp_hpd_gpio) {
+		gpiod_set_value_cansleep(ddata->ct_cp_hpd_gpio, 1);
+		/* DC-DC converter needs at max 300us to get to 90% of 5V */
+		udelay(300);
+	}
+
+	return 0;
+}
+
+static void tpd_disconnect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	WARN_ON(dst != dssdev->dst);
+
+	if (dst != dssdev->dst)
+		return;
+
+	gpiod_set_value_cansleep(ddata->ct_cp_hpd_gpio, 0);
+
+	dst->src = NULL;
+	dssdev->dst = NULL;
+
+	in->ops.hdmi->disconnect(in, &ddata->dssdev);
+}
+
+static int tpd_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
+		return 0;
+
+	in->ops.hdmi->set_timings(in, &ddata->timings);
+
+	r = in->ops.hdmi->enable(in);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return r;
+}
+
+static void tpd_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+		return;
+
+	in->ops.hdmi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void tpd_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.hdmi->set_timings(in, timings);
+}
+
+static void tpd_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->timings;
+}
+
+static int tpd_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	r = in->ops.hdmi->check_timings(in, timings);
+
+	return r;
+}
+
+static int tpd_read_edid(struct omap_dss_device *dssdev,
+		u8 *edid, int len)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!gpiod_get_value_cansleep(ddata->hpd_gpio))
+		return -ENODEV;
+
+	gpiod_set_value_cansleep(ddata->ls_oe_gpio, 1);
+
+	r = in->ops.hdmi->read_edid(in, edid, len);
+
+	gpiod_set_value_cansleep(ddata->ls_oe_gpio, 0);
+
+	return r;
+}
+
+static bool tpd_detect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	return gpiod_get_value_cansleep(ddata->hpd_gpio);
+}
+
+static int tpd_set_infoframe(struct omap_dss_device *dssdev,
+		const struct hdmi_avi_infoframe *avi)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->set_infoframe(in, avi);
+}
+
+static int tpd_set_hdmi_mode(struct omap_dss_device *dssdev,
+		bool hdmi_mode)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.hdmi->set_hdmi_mode(in, hdmi_mode);
+}
+
+static const struct omapdss_hdmi_ops tpd_hdmi_ops = {
+	.connect		= tpd_connect,
+	.disconnect		= tpd_disconnect,
+
+	.enable			= tpd_enable,
+	.disable		= tpd_disable,
+
+	.check_timings		= tpd_check_timings,
+	.set_timings		= tpd_set_timings,
+	.get_timings		= tpd_get_timings,
+
+	.read_edid		= tpd_read_edid,
+	.detect			= tpd_detect,
+	.set_infoframe		= tpd_set_infoframe,
+	.set_hdmi_mode		= tpd_set_hdmi_mode,
+};
+
+static int tpd_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int tpd_probe(struct platform_device *pdev)
+{
+	struct omap_dss_device *in, *dssdev;
+	struct panel_drv_data *ddata;
+	int r;
+	struct gpio_desc *gpio;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	if (pdev->dev.of_node) {
+		r = tpd_probe_of(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+
+	gpio = devm_gpiod_get_index_optional(&pdev->dev, NULL, 0,
+		GPIOD_OUT_LOW);
+	if (IS_ERR(gpio))
+		goto err_gpio;
+
+	ddata->ct_cp_hpd_gpio = gpio;
+
+	gpio = devm_gpiod_get_index_optional(&pdev->dev, NULL, 1,
+		GPIOD_OUT_LOW);
+	if (IS_ERR(gpio))
+		goto err_gpio;
+
+	ddata->ls_oe_gpio = gpio;
+
+	gpio = devm_gpiod_get_index(&pdev->dev, NULL, 2,
+		GPIOD_IN);
+	if (IS_ERR(gpio))
+		goto err_gpio;
+
+	ddata->hpd_gpio = gpio;
+
+	dssdev = &ddata->dssdev;
+	dssdev->ops.hdmi = &tpd_hdmi_ops;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
+	dssdev->output_type = OMAP_DISPLAY_TYPE_HDMI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->port_num = 1;
+
+	in = ddata->in;
+
+	r = omapdss_register_output(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register output\n");
+		goto err_reg;
+	}
+
+	return 0;
+err_reg:
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit tpd_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_output(&ddata->dssdev);
+
+	WARN_ON(omapdss_device_is_enabled(dssdev));
+	if (omapdss_device_is_enabled(dssdev))
+		tpd_disable(dssdev);
+
+	WARN_ON(omapdss_device_is_connected(dssdev));
+	if (omapdss_device_is_connected(dssdev))
+		tpd_disconnect(dssdev, dssdev->dst);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id tpd_of_match[] = {
+	{ .compatible = "omapdss,ti,tpd12s015", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, tpd_of_match);
+
+static struct platform_driver tpd_driver = {
+	.probe	= tpd_probe,
+	.remove	= __exit_p(tpd_remove),
+	.driver	= {
+		.name	= "tpd12s015",
+		.of_match_table = tpd_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(tpd_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("TPD12S015 driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c
new file mode 100644
index 000000000..e780fd4f8
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-dpi.c
@@ -0,0 +1,328 @@
+/*
+ * Generic MIPI DPI Panel Driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+#include <video/of_display_timing.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	int data_lines;
+
+	struct omap_video_timings videomode;
+
+	/* used for non-DT boot, to be removed */
+	int backlight_gpio;
+
+	struct gpio_desc *enable_gpio;
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int panel_dpi_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void panel_dpi_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int panel_dpi_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	in->ops.dpi->set_timings(in, &ddata->videomode);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	gpiod_set_value_cansleep(ddata->enable_gpio, 1);
+
+	if (gpio_is_valid(ddata->backlight_gpio))
+		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void panel_dpi_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (gpio_is_valid(ddata->backlight_gpio))
+		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
+
+	gpiod_set_value_cansleep(ddata->enable_gpio, 0);
+
+	in->ops.dpi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void panel_dpi_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void panel_dpi_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int panel_dpi_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver panel_dpi_ops = {
+	.connect	= panel_dpi_connect,
+	.disconnect	= panel_dpi_disconnect,
+
+	.enable		= panel_dpi_enable,
+	.disable	= panel_dpi_disable,
+
+	.set_timings	= panel_dpi_set_timings,
+	.get_timings	= panel_dpi_get_timings,
+	.check_timings	= panel_dpi_check_timings,
+
+	.get_resolution	= omapdss_default_get_resolution,
+};
+
+static int panel_dpi_probe_pdata(struct platform_device *pdev)
+{
+	const struct panel_dpi_platform_data *pdata;
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev, *in;
+	struct videomode vm;
+	int r;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "failed to find video source '%s'\n",
+				pdata->source);
+		return -EPROBE_DEFER;
+	}
+
+	ddata->in = in;
+
+	ddata->data_lines = pdata->data_lines;
+
+	videomode_from_timing(pdata->display_timing, &vm);
+	videomode_to_omap_video_timings(&vm, &ddata->videomode);
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	r = devm_gpio_request_one(&pdev->dev, pdata->enable_gpio,
+					GPIOF_OUT_INIT_LOW, "panel enable");
+	if (r)
+		goto err_gpio;
+
+	ddata->enable_gpio = gpio_to_desc(pdata->enable_gpio);
+
+	ddata->backlight_gpio = pdata->backlight_gpio;
+
+	return 0;
+
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int panel_dpi_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	int r;
+	struct display_timing timing;
+	struct videomode vm;
+	struct gpio_desc *gpio;
+
+	gpio = devm_gpiod_get_optional(&pdev->dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio))
+		return PTR_ERR(gpio);
+
+	ddata->enable_gpio = gpio;
+
+	ddata->backlight_gpio = -ENOENT;
+
+	r = of_get_display_timing(node, "panel-timing", &timing);
+	if (r) {
+		dev_err(&pdev->dev, "failed to get video timing\n");
+		return r;
+	}
+
+	videomode_from_timing(&timing, &vm);
+	videomode_to_omap_video_timings(&vm, &ddata->videomode);
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int panel_dpi_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = panel_dpi_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else if (pdev->dev.of_node) {
+		r = panel_dpi_probe_of(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	if (gpio_is_valid(ddata->backlight_gpio)) {
+		r = devm_gpio_request_one(&pdev->dev, ddata->backlight_gpio,
+				GPIOF_OUT_INIT_LOW, "panel backlight");
+		if (r)
+			goto err_gpio;
+	}
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &pdev->dev;
+	dssdev->driver = &panel_dpi_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+	dssdev->phy.dpi.data_lines = ddata->data_lines;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit panel_dpi_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(dssdev);
+
+	panel_dpi_disable(dssdev);
+	panel_dpi_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id panel_dpi_of_match[] = {
+	{ .compatible = "omapdss,panel-dpi", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, panel_dpi_of_match);
+
+static struct platform_driver panel_dpi_driver = {
+	.probe = panel_dpi_probe,
+	.remove = __exit_p(panel_dpi_remove),
+	.driver = {
+		.name = "panel-dpi",
+		.of_match_table = panel_dpi_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(panel_dpi_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Generic MIPI DPI Panel Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
new file mode 100644
index 000000000..3414c2609
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c
@@ -0,0 +1,1388 @@
+/*
+ * Generic DSI Command Mode panel driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/* #define DEBUG */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+#include <video/mipi_display.h>
+
+/* DSI Virtual channel. Hardcoded for now. */
+#define TCH 0
+
+#define DCS_READ_NUM_ERRORS	0x05
+#define DCS_BRIGHTNESS		0x51
+#define DCS_CTRL_DISPLAY	0x53
+#define DCS_GET_ID1		0xda
+#define DCS_GET_ID2		0xdb
+#define DCS_GET_ID3		0xdc
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct omap_video_timings timings;
+
+	struct platform_device *pdev;
+
+	struct mutex lock;
+
+	struct backlight_device *bldev;
+
+	unsigned long	hw_guard_end;	/* next value of jiffies when we can
+					 * issue the next sleep in/out command
+					 */
+	unsigned long	hw_guard_wait;	/* max guard time in jiffies */
+
+	/* panel HW configuration from DT or platform data */
+	int reset_gpio;
+	int ext_te_gpio;
+
+	bool use_dsi_backlight;
+
+	struct omap_dsi_pin_config pin_config;
+
+	/* runtime variables */
+	bool enabled;
+
+	bool te_enabled;
+
+	atomic_t do_update;
+	int channel;
+
+	struct delayed_work te_timeout_work;
+
+	bool intro_printed;
+
+	struct workqueue_struct *workqueue;
+
+	bool ulps_enabled;
+	unsigned ulps_timeout;
+	struct delayed_work ulps_work;
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static irqreturn_t dsicm_te_isr(int irq, void *data);
+static void dsicm_te_timeout_work_callback(struct work_struct *work);
+static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable);
+
+static int dsicm_panel_reset(struct panel_drv_data *ddata);
+
+static void dsicm_ulps_work(struct work_struct *work);
+
+static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec)
+{
+	ddata->hw_guard_wait = msecs_to_jiffies(guard_msec);
+	ddata->hw_guard_end = jiffies + ddata->hw_guard_wait;
+}
+
+static void hw_guard_wait(struct panel_drv_data *ddata)
+{
+	unsigned long wait = ddata->hw_guard_end - jiffies;
+
+	if ((long)wait > 0 && wait <= ddata->hw_guard_wait) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(wait);
+	}
+}
+
+static int dsicm_dcs_read_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 *data)
+{
+	struct omap_dss_device *in = ddata->in;
+	int r;
+	u8 buf[1];
+
+	r = in->ops.dsi->dcs_read(in, ddata->channel, dcs_cmd, buf, 1);
+
+	if (r < 0)
+		return r;
+
+	*data = buf[0];
+
+	return 0;
+}
+
+static int dsicm_dcs_write_0(struct panel_drv_data *ddata, u8 dcs_cmd)
+{
+	struct omap_dss_device *in = ddata->in;
+	return in->ops.dsi->dcs_write(in, ddata->channel, &dcs_cmd, 1);
+}
+
+static int dsicm_dcs_write_1(struct panel_drv_data *ddata, u8 dcs_cmd, u8 param)
+{
+	struct omap_dss_device *in = ddata->in;
+	u8 buf[2] = { dcs_cmd, param };
+
+	return in->ops.dsi->dcs_write(in, ddata->channel, buf, 2);
+}
+
+static int dsicm_sleep_in(struct panel_drv_data *ddata)
+
+{
+	struct omap_dss_device *in = ddata->in;
+	u8 cmd;
+	int r;
+
+	hw_guard_wait(ddata);
+
+	cmd = MIPI_DCS_ENTER_SLEEP_MODE;
+	r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, &cmd, 1);
+	if (r)
+		return r;
+
+	hw_guard_start(ddata, 120);
+
+	usleep_range(5000, 10000);
+
+	return 0;
+}
+
+static int dsicm_sleep_out(struct panel_drv_data *ddata)
+{
+	int r;
+
+	hw_guard_wait(ddata);
+
+	r = dsicm_dcs_write_0(ddata, MIPI_DCS_EXIT_SLEEP_MODE);
+	if (r)
+		return r;
+
+	hw_guard_start(ddata, 120);
+
+	usleep_range(5000, 10000);
+
+	return 0;
+}
+
+static int dsicm_get_id(struct panel_drv_data *ddata, u8 *id1, u8 *id2, u8 *id3)
+{
+	int r;
+
+	r = dsicm_dcs_read_1(ddata, DCS_GET_ID1, id1);
+	if (r)
+		return r;
+	r = dsicm_dcs_read_1(ddata, DCS_GET_ID2, id2);
+	if (r)
+		return r;
+	r = dsicm_dcs_read_1(ddata, DCS_GET_ID3, id3);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static int dsicm_set_update_window(struct panel_drv_data *ddata,
+		u16 x, u16 y, u16 w, u16 h)
+{
+	struct omap_dss_device *in = ddata->in;
+	int r;
+	u16 x1 = x;
+	u16 x2 = x + w - 1;
+	u16 y1 = y;
+	u16 y2 = y + h - 1;
+
+	u8 buf[5];
+	buf[0] = MIPI_DCS_SET_COLUMN_ADDRESS;
+	buf[1] = (x1 >> 8) & 0xff;
+	buf[2] = (x1 >> 0) & 0xff;
+	buf[3] = (x2 >> 8) & 0xff;
+	buf[4] = (x2 >> 0) & 0xff;
+
+	r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, buf, sizeof(buf));
+	if (r)
+		return r;
+
+	buf[0] = MIPI_DCS_SET_PAGE_ADDRESS;
+	buf[1] = (y1 >> 8) & 0xff;
+	buf[2] = (y1 >> 0) & 0xff;
+	buf[3] = (y2 >> 8) & 0xff;
+	buf[4] = (y2 >> 0) & 0xff;
+
+	r = in->ops.dsi->dcs_write_nosync(in, ddata->channel, buf, sizeof(buf));
+	if (r)
+		return r;
+
+	in->ops.dsi->bta_sync(in, ddata->channel);
+
+	return r;
+}
+
+static void dsicm_queue_ulps_work(struct panel_drv_data *ddata)
+{
+	if (ddata->ulps_timeout > 0)
+		queue_delayed_work(ddata->workqueue, &ddata->ulps_work,
+				msecs_to_jiffies(ddata->ulps_timeout));
+}
+
+static void dsicm_cancel_ulps_work(struct panel_drv_data *ddata)
+{
+	cancel_delayed_work(&ddata->ulps_work);
+}
+
+static int dsicm_enter_ulps(struct panel_drv_data *ddata)
+{
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (ddata->ulps_enabled)
+		return 0;
+
+	dsicm_cancel_ulps_work(ddata);
+
+	r = _dsicm_enable_te(ddata, false);
+	if (r)
+		goto err;
+
+	if (gpio_is_valid(ddata->ext_te_gpio))
+		disable_irq(gpio_to_irq(ddata->ext_te_gpio));
+
+	in->ops.dsi->disable(in, false, true);
+
+	ddata->ulps_enabled = true;
+
+	return 0;
+
+err:
+	dev_err(&ddata->pdev->dev, "enter ULPS failed");
+	dsicm_panel_reset(ddata);
+
+	ddata->ulps_enabled = false;
+
+	dsicm_queue_ulps_work(ddata);
+
+	return r;
+}
+
+static int dsicm_exit_ulps(struct panel_drv_data *ddata)
+{
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!ddata->ulps_enabled)
+		return 0;
+
+	r = in->ops.dsi->enable(in);
+	if (r) {
+		dev_err(&ddata->pdev->dev, "failed to enable DSI\n");
+		goto err1;
+	}
+
+	in->ops.dsi->enable_hs(in, ddata->channel, true);
+
+	r = _dsicm_enable_te(ddata, true);
+	if (r) {
+		dev_err(&ddata->pdev->dev, "failed to re-enable TE");
+		goto err2;
+	}
+
+	if (gpio_is_valid(ddata->ext_te_gpio))
+		enable_irq(gpio_to_irq(ddata->ext_te_gpio));
+
+	dsicm_queue_ulps_work(ddata);
+
+	ddata->ulps_enabled = false;
+
+	return 0;
+
+err2:
+	dev_err(&ddata->pdev->dev, "failed to exit ULPS");
+
+	r = dsicm_panel_reset(ddata);
+	if (!r) {
+		if (gpio_is_valid(ddata->ext_te_gpio))
+			enable_irq(gpio_to_irq(ddata->ext_te_gpio));
+		ddata->ulps_enabled = false;
+	}
+err1:
+	dsicm_queue_ulps_work(ddata);
+
+	return r;
+}
+
+static int dsicm_wake_up(struct panel_drv_data *ddata)
+{
+	if (ddata->ulps_enabled)
+		return dsicm_exit_ulps(ddata);
+
+	dsicm_cancel_ulps_work(ddata);
+	dsicm_queue_ulps_work(ddata);
+	return 0;
+}
+
+static int dsicm_bl_update_status(struct backlight_device *dev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+	int level;
+
+	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
+			dev->props.power == FB_BLANK_UNBLANK)
+		level = dev->props.brightness;
+	else
+		level = 0;
+
+	dev_dbg(&ddata->pdev->dev, "update brightness to %d\n", level);
+
+	mutex_lock(&ddata->lock);
+
+	if (ddata->enabled) {
+		in->ops.dsi->bus_lock(in);
+
+		r = dsicm_wake_up(ddata);
+		if (!r)
+			r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, level);
+
+		in->ops.dsi->bus_unlock(in);
+	} else {
+		r = 0;
+	}
+
+	mutex_unlock(&ddata->lock);
+
+	return r;
+}
+
+static int dsicm_bl_get_intensity(struct backlight_device *dev)
+{
+	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
+			dev->props.power == FB_BLANK_UNBLANK)
+		return dev->props.brightness;
+
+	return 0;
+}
+
+static const struct backlight_ops dsicm_bl_ops = {
+	.get_brightness = dsicm_bl_get_intensity,
+	.update_status  = dsicm_bl_update_status,
+};
+
+static void dsicm_get_resolution(struct omap_dss_device *dssdev,
+		u16 *xres, u16 *yres)
+{
+	*xres = dssdev->panel.timings.x_res;
+	*yres = dssdev->panel.timings.y_res;
+}
+
+static ssize_t dsicm_num_errors_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *in = ddata->in;
+	u8 errors = 0;
+	int r;
+
+	mutex_lock(&ddata->lock);
+
+	if (ddata->enabled) {
+		in->ops.dsi->bus_lock(in);
+
+		r = dsicm_wake_up(ddata);
+		if (!r)
+			r = dsicm_dcs_read_1(ddata, DCS_READ_NUM_ERRORS,
+					&errors);
+
+		in->ops.dsi->bus_unlock(in);
+	} else {
+		r = -ENODEV;
+	}
+
+	mutex_unlock(&ddata->lock);
+
+	if (r)
+		return r;
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", errors);
+}
+
+static ssize_t dsicm_hw_revision_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *in = ddata->in;
+	u8 id1, id2, id3;
+	int r;
+
+	mutex_lock(&ddata->lock);
+
+	if (ddata->enabled) {
+		in->ops.dsi->bus_lock(in);
+
+		r = dsicm_wake_up(ddata);
+		if (!r)
+			r = dsicm_get_id(ddata, &id1, &id2, &id3);
+
+		in->ops.dsi->bus_unlock(in);
+	} else {
+		r = -ENODEV;
+	}
+
+	mutex_unlock(&ddata->lock);
+
+	if (r)
+		return r;
+
+	return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3);
+}
+
+static ssize_t dsicm_store_ulps(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *in = ddata->in;
+	unsigned long t;
+	int r;
+
+	r = kstrtoul(buf, 0, &t);
+	if (r)
+		return r;
+
+	mutex_lock(&ddata->lock);
+
+	if (ddata->enabled) {
+		in->ops.dsi->bus_lock(in);
+
+		if (t)
+			r = dsicm_enter_ulps(ddata);
+		else
+			r = dsicm_wake_up(ddata);
+
+		in->ops.dsi->bus_unlock(in);
+	}
+
+	mutex_unlock(&ddata->lock);
+
+	if (r)
+		return r;
+
+	return count;
+}
+
+static ssize_t dsicm_show_ulps(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	unsigned t;
+
+	mutex_lock(&ddata->lock);
+	t = ddata->ulps_enabled;
+	mutex_unlock(&ddata->lock);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", t);
+}
+
+static ssize_t dsicm_store_ulps_timeout(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *in = ddata->in;
+	unsigned long t;
+	int r;
+
+	r = kstrtoul(buf, 0, &t);
+	if (r)
+		return r;
+
+	mutex_lock(&ddata->lock);
+	ddata->ulps_timeout = t;
+
+	if (ddata->enabled) {
+		/* dsicm_wake_up will restart the timer */
+		in->ops.dsi->bus_lock(in);
+		r = dsicm_wake_up(ddata);
+		in->ops.dsi->bus_unlock(in);
+	}
+
+	mutex_unlock(&ddata->lock);
+
+	if (r)
+		return r;
+
+	return count;
+}
+
+static ssize_t dsicm_show_ulps_timeout(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	unsigned t;
+
+	mutex_lock(&ddata->lock);
+	t = ddata->ulps_timeout;
+	mutex_unlock(&ddata->lock);
+
+	return snprintf(buf, PAGE_SIZE, "%u\n", t);
+}
+
+static DEVICE_ATTR(num_dsi_errors, S_IRUGO, dsicm_num_errors_show, NULL);
+static DEVICE_ATTR(hw_revision, S_IRUGO, dsicm_hw_revision_show, NULL);
+static DEVICE_ATTR(ulps, S_IRUGO | S_IWUSR,
+		dsicm_show_ulps, dsicm_store_ulps);
+static DEVICE_ATTR(ulps_timeout, S_IRUGO | S_IWUSR,
+		dsicm_show_ulps_timeout, dsicm_store_ulps_timeout);
+
+static struct attribute *dsicm_attrs[] = {
+	&dev_attr_num_dsi_errors.attr,
+	&dev_attr_hw_revision.attr,
+	&dev_attr_ulps.attr,
+	&dev_attr_ulps_timeout.attr,
+	NULL,
+};
+
+static struct attribute_group dsicm_attr_group = {
+	.attrs = dsicm_attrs,
+};
+
+static void dsicm_hw_reset(struct panel_drv_data *ddata)
+{
+	if (!gpio_is_valid(ddata->reset_gpio))
+		return;
+
+	gpio_set_value(ddata->reset_gpio, 1);
+	udelay(10);
+	/* reset the panel */
+	gpio_set_value(ddata->reset_gpio, 0);
+	/* assert reset */
+	udelay(10);
+	gpio_set_value(ddata->reset_gpio, 1);
+	/* wait after releasing reset */
+	usleep_range(5000, 10000);
+}
+
+static int dsicm_power_on(struct panel_drv_data *ddata)
+{
+	struct omap_dss_device *in = ddata->in;
+	u8 id1, id2, id3;
+	int r;
+	struct omap_dss_dsi_config dsi_config = {
+		.mode = OMAP_DSS_DSI_CMD_MODE,
+		.pixel_format = OMAP_DSS_DSI_FMT_RGB888,
+		.timings = &ddata->timings,
+		.hs_clk_min = 150000000,
+		.hs_clk_max = 300000000,
+		.lp_clk_min = 7000000,
+		.lp_clk_max = 10000000,
+	};
+
+	if (ddata->pin_config.num_pins > 0) {
+		r = in->ops.dsi->configure_pins(in, &ddata->pin_config);
+		if (r) {
+			dev_err(&ddata->pdev->dev,
+				"failed to configure DSI pins\n");
+			goto err0;
+		}
+	}
+
+	r = in->ops.dsi->set_config(in, &dsi_config);
+	if (r) {
+		dev_err(&ddata->pdev->dev, "failed to configure DSI\n");
+		goto err0;
+	}
+
+	r = in->ops.dsi->enable(in);
+	if (r) {
+		dev_err(&ddata->pdev->dev, "failed to enable DSI\n");
+		goto err0;
+	}
+
+	dsicm_hw_reset(ddata);
+
+	in->ops.dsi->enable_hs(in, ddata->channel, false);
+
+	r = dsicm_sleep_out(ddata);
+	if (r)
+		goto err;
+
+	r = dsicm_get_id(ddata, &id1, &id2, &id3);
+	if (r)
+		goto err;
+
+	r = dsicm_dcs_write_1(ddata, DCS_BRIGHTNESS, 0xff);
+	if (r)
+		goto err;
+
+	r = dsicm_dcs_write_1(ddata, DCS_CTRL_DISPLAY,
+			(1<<2) | (1<<5));	/* BL | BCTRL */
+	if (r)
+		goto err;
+
+	r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_PIXEL_FORMAT,
+		MIPI_DCS_PIXEL_FMT_24BIT);
+	if (r)
+		goto err;
+
+	r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_DISPLAY_ON);
+	if (r)
+		goto err;
+
+	r = _dsicm_enable_te(ddata, ddata->te_enabled);
+	if (r)
+		goto err;
+
+	r = in->ops.dsi->enable_video_output(in, ddata->channel);
+	if (r)
+		goto err;
+
+	ddata->enabled = 1;
+
+	if (!ddata->intro_printed) {
+		dev_info(&ddata->pdev->dev, "panel revision %02x.%02x.%02x\n",
+			id1, id2, id3);
+		ddata->intro_printed = true;
+	}
+
+	in->ops.dsi->enable_hs(in, ddata->channel, true);
+
+	return 0;
+err:
+	dev_err(&ddata->pdev->dev, "error while enabling panel, issuing HW reset\n");
+
+	dsicm_hw_reset(ddata);
+
+	in->ops.dsi->disable(in, true, false);
+err0:
+	return r;
+}
+
+static void dsicm_power_off(struct panel_drv_data *ddata)
+{
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	in->ops.dsi->disable_video_output(in, ddata->channel);
+
+	r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_DISPLAY_OFF);
+	if (!r)
+		r = dsicm_sleep_in(ddata);
+
+	if (r) {
+		dev_err(&ddata->pdev->dev,
+				"error disabling panel, issuing HW reset\n");
+		dsicm_hw_reset(ddata);
+	}
+
+	in->ops.dsi->disable(in, true, false);
+
+	ddata->enabled = 0;
+}
+
+static int dsicm_panel_reset(struct panel_drv_data *ddata)
+{
+	dev_err(&ddata->pdev->dev, "performing LCD reset\n");
+
+	dsicm_power_off(ddata);
+	dsicm_hw_reset(ddata);
+	return dsicm_power_on(ddata);
+}
+
+static int dsicm_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	struct device *dev = &ddata->pdev->dev;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dsi->connect(in, dssdev);
+	if (r) {
+		dev_err(dev, "Failed to connect to video source\n");
+		return r;
+	}
+
+	r = in->ops.dsi->request_vc(ddata->in, &ddata->channel);
+	if (r) {
+		dev_err(dev, "failed to get virtual channel\n");
+		goto err_req_vc;
+	}
+
+	r = in->ops.dsi->set_vc_id(ddata->in, ddata->channel, TCH);
+	if (r) {
+		dev_err(dev, "failed to set VC_ID\n");
+		goto err_vc_id;
+	}
+
+	return 0;
+
+err_vc_id:
+	in->ops.dsi->release_vc(ddata->in, ddata->channel);
+err_req_vc:
+	in->ops.dsi->disconnect(in, dssdev);
+	return r;
+}
+
+static void dsicm_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dsi->release_vc(in, ddata->channel);
+	in->ops.dsi->disconnect(in, dssdev);
+}
+
+static int dsicm_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(&ddata->pdev->dev, "enable\n");
+
+	mutex_lock(&ddata->lock);
+
+	if (!omapdss_device_is_connected(dssdev)) {
+		r = -ENODEV;
+		goto err;
+	}
+
+	if (omapdss_device_is_enabled(dssdev)) {
+		r = 0;
+		goto err;
+	}
+
+	in->ops.dsi->bus_lock(in);
+
+	r = dsicm_power_on(ddata);
+
+	in->ops.dsi->bus_unlock(in);
+
+	if (r)
+		goto err;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	mutex_unlock(&ddata->lock);
+
+	return 0;
+err:
+	dev_dbg(&ddata->pdev->dev, "enable failed\n");
+	mutex_unlock(&ddata->lock);
+	return r;
+}
+
+static void dsicm_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(&ddata->pdev->dev, "disable\n");
+
+	mutex_lock(&ddata->lock);
+
+	dsicm_cancel_ulps_work(ddata);
+
+	in->ops.dsi->bus_lock(in);
+
+	if (omapdss_device_is_enabled(dssdev)) {
+		r = dsicm_wake_up(ddata);
+		if (!r)
+			dsicm_power_off(ddata);
+	}
+
+	in->ops.dsi->bus_unlock(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+
+	mutex_unlock(&ddata->lock);
+}
+
+static void dsicm_framedone_cb(int err, void *data)
+{
+	struct panel_drv_data *ddata = data;
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(&ddata->pdev->dev, "framedone, err %d\n", err);
+	in->ops.dsi->bus_unlock(ddata->in);
+}
+
+static irqreturn_t dsicm_te_isr(int irq, void *data)
+{
+	struct panel_drv_data *ddata = data;
+	struct omap_dss_device *in = ddata->in;
+	int old;
+	int r;
+
+	old = atomic_cmpxchg(&ddata->do_update, 1, 0);
+
+	if (old) {
+		cancel_delayed_work(&ddata->te_timeout_work);
+
+		r = in->ops.dsi->update(in, ddata->channel, dsicm_framedone_cb,
+				ddata);
+		if (r)
+			goto err;
+	}
+
+	return IRQ_HANDLED;
+err:
+	dev_err(&ddata->pdev->dev, "start update failed\n");
+	in->ops.dsi->bus_unlock(in);
+	return IRQ_HANDLED;
+}
+
+static void dsicm_te_timeout_work_callback(struct work_struct *work)
+{
+	struct panel_drv_data *ddata = container_of(work, struct panel_drv_data,
+					te_timeout_work.work);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_err(&ddata->pdev->dev, "TE not received for 250ms!\n");
+
+	atomic_set(&ddata->do_update, 0);
+	in->ops.dsi->bus_unlock(in);
+}
+
+static int dsicm_update(struct omap_dss_device *dssdev,
+				    u16 x, u16 y, u16 w, u16 h)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(&ddata->pdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
+
+	mutex_lock(&ddata->lock);
+	in->ops.dsi->bus_lock(in);
+
+	r = dsicm_wake_up(ddata);
+	if (r)
+		goto err;
+
+	if (!ddata->enabled) {
+		r = 0;
+		goto err;
+	}
+
+	/* XXX no need to send this every frame, but dsi break if not done */
+	r = dsicm_set_update_window(ddata, 0, 0,
+			dssdev->panel.timings.x_res,
+			dssdev->panel.timings.y_res);
+	if (r)
+		goto err;
+
+	if (ddata->te_enabled && gpio_is_valid(ddata->ext_te_gpio)) {
+		schedule_delayed_work(&ddata->te_timeout_work,
+				msecs_to_jiffies(250));
+		atomic_set(&ddata->do_update, 1);
+	} else {
+		r = in->ops.dsi->update(in, ddata->channel, dsicm_framedone_cb,
+				ddata);
+		if (r)
+			goto err;
+	}
+
+	/* note: no bus_unlock here. unlock is in framedone_cb */
+	mutex_unlock(&ddata->lock);
+	return 0;
+err:
+	in->ops.dsi->bus_unlock(in);
+	mutex_unlock(&ddata->lock);
+	return r;
+}
+
+static int dsicm_sync(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(&ddata->pdev->dev, "sync\n");
+
+	mutex_lock(&ddata->lock);
+	in->ops.dsi->bus_lock(in);
+	in->ops.dsi->bus_unlock(in);
+	mutex_unlock(&ddata->lock);
+
+	dev_dbg(&ddata->pdev->dev, "sync done\n");
+
+	return 0;
+}
+
+static int _dsicm_enable_te(struct panel_drv_data *ddata, bool enable)
+{
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (enable)
+		r = dsicm_dcs_write_1(ddata, MIPI_DCS_SET_TEAR_ON, 0);
+	else
+		r = dsicm_dcs_write_0(ddata, MIPI_DCS_SET_TEAR_OFF);
+
+	if (!gpio_is_valid(ddata->ext_te_gpio))
+		in->ops.dsi->enable_te(in, enable);
+
+	/* possible panel bug */
+	msleep(100);
+
+	return r;
+}
+
+static int dsicm_enable_te(struct omap_dss_device *dssdev, bool enable)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	mutex_lock(&ddata->lock);
+
+	if (ddata->te_enabled == enable)
+		goto end;
+
+	in->ops.dsi->bus_lock(in);
+
+	if (ddata->enabled) {
+		r = dsicm_wake_up(ddata);
+		if (r)
+			goto err;
+
+		r = _dsicm_enable_te(ddata, enable);
+		if (r)
+			goto err;
+	}
+
+	ddata->te_enabled = enable;
+
+	in->ops.dsi->bus_unlock(in);
+end:
+	mutex_unlock(&ddata->lock);
+
+	return 0;
+err:
+	in->ops.dsi->bus_unlock(in);
+	mutex_unlock(&ddata->lock);
+
+	return r;
+}
+
+static int dsicm_get_te(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	int r;
+
+	mutex_lock(&ddata->lock);
+	r = ddata->te_enabled;
+	mutex_unlock(&ddata->lock);
+
+	return r;
+}
+
+static int dsicm_memory_read(struct omap_dss_device *dssdev,
+		void *buf, size_t size,
+		u16 x, u16 y, u16 w, u16 h)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+	int first = 1;
+	int plen;
+	unsigned buf_used = 0;
+
+	if (size < w * h * 3)
+		return -ENOMEM;
+
+	mutex_lock(&ddata->lock);
+
+	if (!ddata->enabled) {
+		r = -ENODEV;
+		goto err1;
+	}
+
+	size = min(w * h * 3,
+			dssdev->panel.timings.x_res *
+			dssdev->panel.timings.y_res * 3);
+
+	in->ops.dsi->bus_lock(in);
+
+	r = dsicm_wake_up(ddata);
+	if (r)
+		goto err2;
+
+	/* plen 1 or 2 goes into short packet. until checksum error is fixed,
+	 * use short packets. plen 32 works, but bigger packets seem to cause
+	 * an error. */
+	if (size % 2)
+		plen = 1;
+	else
+		plen = 2;
+
+	dsicm_set_update_window(ddata, x, y, w, h);
+
+	r = in->ops.dsi->set_max_rx_packet_size(in, ddata->channel, plen);
+	if (r)
+		goto err2;
+
+	while (buf_used < size) {
+		u8 dcs_cmd = first ? 0x2e : 0x3e;
+		first = 0;
+
+		r = in->ops.dsi->dcs_read(in, ddata->channel, dcs_cmd,
+				buf + buf_used, size - buf_used);
+
+		if (r < 0) {
+			dev_err(dssdev->dev, "read error\n");
+			goto err3;
+		}
+
+		buf_used += r;
+
+		if (r < plen) {
+			dev_err(&ddata->pdev->dev, "short read\n");
+			break;
+		}
+
+		if (signal_pending(current)) {
+			dev_err(&ddata->pdev->dev, "signal pending, "
+					"aborting memory read\n");
+			r = -ERESTARTSYS;
+			goto err3;
+		}
+	}
+
+	r = buf_used;
+
+err3:
+	in->ops.dsi->set_max_rx_packet_size(in, ddata->channel, 1);
+err2:
+	in->ops.dsi->bus_unlock(in);
+err1:
+	mutex_unlock(&ddata->lock);
+	return r;
+}
+
+static void dsicm_ulps_work(struct work_struct *work)
+{
+	struct panel_drv_data *ddata = container_of(work, struct panel_drv_data,
+			ulps_work.work);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	mutex_lock(&ddata->lock);
+
+	if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE || !ddata->enabled) {
+		mutex_unlock(&ddata->lock);
+		return;
+	}
+
+	in->ops.dsi->bus_lock(in);
+
+	dsicm_enter_ulps(ddata);
+
+	in->ops.dsi->bus_unlock(in);
+	mutex_unlock(&ddata->lock);
+}
+
+static struct omap_dss_driver dsicm_ops = {
+	.connect	= dsicm_connect,
+	.disconnect	= dsicm_disconnect,
+
+	.enable		= dsicm_enable,
+	.disable	= dsicm_disable,
+
+	.update		= dsicm_update,
+	.sync		= dsicm_sync,
+
+	.get_resolution	= dsicm_get_resolution,
+	.get_recommended_bpp = omapdss_default_get_recommended_bpp,
+
+	.enable_te	= dsicm_enable_te,
+	.get_te		= dsicm_get_te,
+
+	.memory_read	= dsicm_memory_read,
+};
+
+static int dsicm_probe_pdata(struct platform_device *pdev)
+{
+	const struct panel_dsicm_platform_data *pdata;
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev, *in;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return -EPROBE_DEFER;
+	}
+	ddata->in = in;
+
+	ddata->reset_gpio = pdata->reset_gpio;
+
+	if (pdata->use_ext_te)
+		ddata->ext_te_gpio = pdata->ext_te_gpio;
+	else
+		ddata->ext_te_gpio = -1;
+
+	ddata->ulps_timeout = pdata->ulps_timeout;
+
+	ddata->use_dsi_backlight = pdata->use_dsi_backlight;
+
+	ddata->pin_config = pdata->pin_config;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int dsicm_probe_of(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *in;
+	int gpio;
+
+	gpio = of_get_named_gpio(node, "reset-gpios", 0);
+	if (!gpio_is_valid(gpio)) {
+		dev_err(&pdev->dev, "failed to parse reset gpio\n");
+		return gpio;
+	}
+	ddata->reset_gpio = gpio;
+
+	gpio = of_get_named_gpio(node, "te-gpios", 0);
+	if (gpio_is_valid(gpio) || gpio == -ENOENT) {
+		ddata->ext_te_gpio = gpio;
+	} else {
+		dev_err(&pdev->dev, "failed to parse TE gpio\n");
+		return gpio;
+	}
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	/* TODO: ulps, backlight */
+
+	return 0;
+}
+
+static int dsicm_probe(struct platform_device *pdev)
+{
+	struct backlight_properties props;
+	struct panel_drv_data *ddata;
+	struct backlight_device *bldev = NULL;
+	struct device *dev = &pdev->dev;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	dev_dbg(dev, "probe\n");
+
+	ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+	ddata->pdev = pdev;
+
+	if (dev_get_platdata(dev)) {
+		r = dsicm_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else if (pdev->dev.of_node) {
+		r = dsicm_probe_of(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	ddata->timings.x_res = 864;
+	ddata->timings.y_res = 480;
+	ddata->timings.pixelclock = 864 * 480 * 60;
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = dev;
+	dssdev->driver = &dsicm_ops;
+	dssdev->panel.timings = ddata->timings;
+	dssdev->type = OMAP_DISPLAY_TYPE_DSI;
+	dssdev->owner = THIS_MODULE;
+
+	dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
+	dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE |
+		OMAP_DSS_DISPLAY_CAP_TEAR_ELIM;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	mutex_init(&ddata->lock);
+
+	atomic_set(&ddata->do_update, 0);
+
+	if (gpio_is_valid(ddata->reset_gpio)) {
+		r = devm_gpio_request_one(dev, ddata->reset_gpio,
+				GPIOF_OUT_INIT_LOW, "taal rst");
+		if (r) {
+			dev_err(dev, "failed to request reset gpio\n");
+			return r;
+		}
+	}
+
+	if (gpio_is_valid(ddata->ext_te_gpio)) {
+		r = devm_gpio_request_one(dev, ddata->ext_te_gpio,
+				GPIOF_IN, "taal irq");
+		if (r) {
+			dev_err(dev, "GPIO request failed\n");
+			return r;
+		}
+
+		r = devm_request_irq(dev, gpio_to_irq(ddata->ext_te_gpio),
+				dsicm_te_isr,
+				IRQF_TRIGGER_RISING,
+				"taal vsync", ddata);
+
+		if (r) {
+			dev_err(dev, "IRQ request failed\n");
+			return r;
+		}
+
+		INIT_DEFERRABLE_WORK(&ddata->te_timeout_work,
+					dsicm_te_timeout_work_callback);
+
+		dev_dbg(dev, "Using GPIO TE\n");
+	}
+
+	ddata->workqueue = create_singlethread_workqueue("dsicm_wq");
+	if (ddata->workqueue == NULL) {
+		dev_err(dev, "can't create workqueue\n");
+		return -ENOMEM;
+	}
+	INIT_DELAYED_WORK(&ddata->ulps_work, dsicm_ulps_work);
+
+	dsicm_hw_reset(ddata);
+
+	if (ddata->use_dsi_backlight) {
+		memset(&props, 0, sizeof(struct backlight_properties));
+		props.max_brightness = 255;
+
+		props.type = BACKLIGHT_RAW;
+		bldev = backlight_device_register(dev_name(dev),
+				dev, ddata, &dsicm_bl_ops, &props);
+		if (IS_ERR(bldev)) {
+			r = PTR_ERR(bldev);
+			goto err_bl;
+		}
+
+		ddata->bldev = bldev;
+
+		bldev->props.fb_blank = FB_BLANK_UNBLANK;
+		bldev->props.power = FB_BLANK_UNBLANK;
+		bldev->props.brightness = 255;
+
+		dsicm_bl_update_status(bldev);
+	}
+
+	r = sysfs_create_group(&dev->kobj, &dsicm_attr_group);
+	if (r) {
+		dev_err(dev, "failed to create sysfs files\n");
+		goto err_sysfs_create;
+	}
+
+	return 0;
+
+err_sysfs_create:
+	if (bldev != NULL)
+		backlight_device_unregister(bldev);
+err_bl:
+	destroy_workqueue(ddata->workqueue);
+err_reg:
+	return r;
+}
+
+static int __exit dsicm_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct backlight_device *bldev;
+
+	dev_dbg(&pdev->dev, "remove\n");
+
+	omapdss_unregister_display(dssdev);
+
+	dsicm_disable(dssdev);
+	dsicm_disconnect(dssdev);
+
+	sysfs_remove_group(&pdev->dev.kobj, &dsicm_attr_group);
+
+	bldev = ddata->bldev;
+	if (bldev != NULL) {
+		bldev->props.power = FB_BLANK_POWERDOWN;
+		dsicm_bl_update_status(bldev);
+		backlight_device_unregister(bldev);
+	}
+
+	omap_dss_put_device(ddata->in);
+
+	dsicm_cancel_ulps_work(ddata);
+	destroy_workqueue(ddata->workqueue);
+
+	/* reset, to be sure that the panel is in a valid state */
+	dsicm_hw_reset(ddata);
+
+	return 0;
+}
+
+static const struct of_device_id dsicm_of_match[] = {
+	{ .compatible = "omapdss,panel-dsi-cm", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, dsicm_of_match);
+
+static struct platform_driver dsicm_driver = {
+	.probe = dsicm_probe,
+	.remove = __exit_p(dsicm_remove),
+	.driver = {
+		.name = "panel-dsi-cm",
+		.of_match_table = dsicm_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(dsicm_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Generic DSI Command Mode Panel Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c
new file mode 100644
index 000000000..18eb60e9c
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-lgphilips-lb035q02.c
@@ -0,0 +1,404 @@
+/*
+ * LG.Philips LB035Q02 LCD Panel driver
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ * Based on a driver by: Steve Sakoman <steve@sakoman.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/mutex.h>
+#include <linux/gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+static struct omap_video_timings lb035q02_timings = {
+	.x_res = 320,
+	.y_res = 240,
+
+	.pixelclock	= 6500000,
+
+	.hsw		= 2,
+	.hfp		= 20,
+	.hbp		= 68,
+
+	.vsw		= 2,
+	.vfp		= 4,
+	.vbp		= 18,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
+};
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct spi_device *spi;
+
+	int data_lines;
+
+	struct omap_video_timings videomode;
+
+	/* used for non-DT boot, to be removed */
+	int backlight_gpio;
+
+	struct gpio_desc *enable_gpio;
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int lb035q02_write_reg(struct spi_device *spi, u8 reg, u16 val)
+{
+	struct spi_message msg;
+	struct spi_transfer index_xfer = {
+		.len		= 3,
+		.cs_change	= 1,
+	};
+	struct spi_transfer value_xfer = {
+		.len		= 3,
+	};
+	u8	buffer[16];
+
+	spi_message_init(&msg);
+
+	/* register index */
+	buffer[0] = 0x70;
+	buffer[1] = 0x00;
+	buffer[2] = reg & 0x7f;
+	index_xfer.tx_buf = buffer;
+	spi_message_add_tail(&index_xfer, &msg);
+
+	/* register value */
+	buffer[4] = 0x72;
+	buffer[5] = val >> 8;
+	buffer[6] = val;
+	value_xfer.tx_buf = buffer + 4;
+	spi_message_add_tail(&value_xfer, &msg);
+
+	return spi_sync(spi, &msg);
+}
+
+static void init_lb035q02_panel(struct spi_device *spi)
+{
+	/* Init sequence from page 28 of the lb035q02 spec */
+	lb035q02_write_reg(spi, 0x01, 0x6300);
+	lb035q02_write_reg(spi, 0x02, 0x0200);
+	lb035q02_write_reg(spi, 0x03, 0x0177);
+	lb035q02_write_reg(spi, 0x04, 0x04c7);
+	lb035q02_write_reg(spi, 0x05, 0xffc0);
+	lb035q02_write_reg(spi, 0x06, 0xe806);
+	lb035q02_write_reg(spi, 0x0a, 0x4008);
+	lb035q02_write_reg(spi, 0x0b, 0x0000);
+	lb035q02_write_reg(spi, 0x0d, 0x0030);
+	lb035q02_write_reg(spi, 0x0e, 0x2800);
+	lb035q02_write_reg(spi, 0x0f, 0x0000);
+	lb035q02_write_reg(spi, 0x16, 0x9f80);
+	lb035q02_write_reg(spi, 0x17, 0x0a0f);
+	lb035q02_write_reg(spi, 0x1e, 0x00c1);
+	lb035q02_write_reg(spi, 0x30, 0x0300);
+	lb035q02_write_reg(spi, 0x31, 0x0007);
+	lb035q02_write_reg(spi, 0x32, 0x0000);
+	lb035q02_write_reg(spi, 0x33, 0x0000);
+	lb035q02_write_reg(spi, 0x34, 0x0707);
+	lb035q02_write_reg(spi, 0x35, 0x0004);
+	lb035q02_write_reg(spi, 0x36, 0x0302);
+	lb035q02_write_reg(spi, 0x37, 0x0202);
+	lb035q02_write_reg(spi, 0x3a, 0x0a0d);
+	lb035q02_write_reg(spi, 0x3b, 0x0806);
+}
+
+static int lb035q02_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	init_lb035q02_panel(ddata->spi);
+
+	return 0;
+}
+
+static void lb035q02_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int lb035q02_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	in->ops.dpi->set_timings(in, &ddata->videomode);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 1);
+
+	if (gpio_is_valid(ddata->backlight_gpio))
+		gpio_set_value_cansleep(ddata->backlight_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void lb035q02_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 0);
+
+	if (gpio_is_valid(ddata->backlight_gpio))
+		gpio_set_value_cansleep(ddata->backlight_gpio, 0);
+
+	in->ops.dpi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void lb035q02_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void lb035q02_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int lb035q02_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver lb035q02_ops = {
+	.connect	= lb035q02_connect,
+	.disconnect	= lb035q02_disconnect,
+
+	.enable		= lb035q02_enable,
+	.disable	= lb035q02_disable,
+
+	.set_timings	= lb035q02_set_timings,
+	.get_timings	= lb035q02_get_timings,
+	.check_timings	= lb035q02_check_timings,
+
+	.get_resolution	= omapdss_default_get_resolution,
+};
+
+static int lb035q02_probe_pdata(struct spi_device *spi)
+{
+	const struct panel_lb035q02_platform_data *pdata;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev, *in;
+	int r;
+
+	pdata = dev_get_platdata(&spi->dev);
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&spi->dev, "failed to find video source '%s'\n",
+				pdata->source);
+		return -EPROBE_DEFER;
+	}
+
+	ddata->in = in;
+
+	ddata->data_lines = pdata->data_lines;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	r = devm_gpio_request_one(&spi->dev, pdata->enable_gpio,
+					GPIOF_OUT_INIT_LOW, "panel enable");
+	if (r)
+		goto err_gpio;
+
+	ddata->enable_gpio = gpio_to_desc(pdata->enable_gpio);
+
+	ddata->backlight_gpio = pdata->backlight_gpio;
+
+	return 0;
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int lb035q02_probe_of(struct spi_device *spi)
+{
+	struct device_node *node = spi->dev.of_node;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *in;
+	struct gpio_desc *gpio;
+
+	gpio = devm_gpiod_get(&spi->dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(gpio)) {
+		dev_err(&spi->dev, "failed to parse enable gpio\n");
+		return PTR_ERR(gpio);
+	}
+
+	ddata->enable_gpio = gpio;
+
+	ddata->backlight_gpio = -ENOENT;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&spi->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int lb035q02_panel_spi_probe(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, ddata);
+
+	ddata->spi = spi;
+
+	if (dev_get_platdata(&spi->dev)) {
+		r = lb035q02_probe_pdata(spi);
+		if (r)
+			return r;
+	} else if (spi->dev.of_node) {
+		r = lb035q02_probe_of(spi);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	if (gpio_is_valid(ddata->backlight_gpio)) {
+		r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio,
+				GPIOF_OUT_INIT_LOW, "panel backlight");
+		if (r)
+			goto err_gpio;
+	}
+
+	ddata->videomode = lb035q02_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &spi->dev;
+	dssdev->driver = &lb035q02_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+	dssdev->phy.dpi.data_lines = ddata->data_lines;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&spi->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int lb035q02_panel_spi_remove(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(dssdev);
+
+	lb035q02_disable(dssdev);
+	lb035q02_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id lb035q02_of_match[] = {
+	{ .compatible = "omapdss,lgphilips,lb035q02", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, lb035q02_of_match);
+
+static struct spi_driver lb035q02_spi_driver = {
+	.probe		= lb035q02_panel_spi_probe,
+	.remove		= lb035q02_panel_spi_remove,
+	.driver		= {
+		.name	= "panel_lgphilips_lb035q02",
+		.of_match_table = lb035q02_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_spi_driver(lb035q02_spi_driver);
+
+MODULE_ALIAS("spi:lgphilips,lb035q02");
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c
new file mode 100644
index 000000000..8a928c9a2
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-nec-nl8048hl11.c
@@ -0,0 +1,437 @@
+/*
+ * NEC NL8048HL11 Panel driver
+ *
+ * Copyright (C) 2010 Texas Instruments Inc.
+ * Author: Erik Gilling <konkers@android.com>
+ * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device	dssdev;
+	struct omap_dss_device *in;
+
+	struct omap_video_timings videomode;
+
+	int data_lines;
+
+	int res_gpio;
+	int qvga_gpio;
+
+	struct spi_device *spi;
+};
+
+#define LCD_XRES		800
+#define LCD_YRES		480
+/*
+ * NEC PIX Clock Ratings
+ * MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz
+ */
+#define LCD_PIXEL_CLOCK		23800000
+
+static const struct {
+	unsigned char addr;
+	unsigned char dat;
+} nec_8048_init_seq[] = {
+	{ 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 }, { 5, 0x14 },
+	{ 6, 0x24 }, { 16, 0xD7 }, { 17, 0x00 }, { 18, 0x00 }, { 19, 0x55 },
+	{ 20, 0x01 }, { 21, 0x70 }, { 22, 0x1E }, { 23, 0x25 },	{ 24, 0x25 },
+	{ 25, 0x02 }, { 26, 0x02 }, { 27, 0xA0 }, { 32, 0x2F }, { 33, 0x0F },
+	{ 34, 0x0F }, { 35, 0x0F }, { 36, 0x0F }, { 37, 0x0F },	{ 38, 0x0F },
+	{ 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 }, { 42, 0x02 },	{ 43, 0x0F },
+	{ 44, 0x0F }, { 45, 0x0F }, { 46, 0x0F }, { 47, 0x0F },	{ 48, 0x0F },
+	{ 49, 0x0F }, { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 },
+	{ 80, 0x0C }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 },	{ 86, 0x14 },
+	{ 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 }, { 92, 0x02 },	{ 93, 0x0C },
+	{ 94, 0x1C }, { 95, 0x27 }, { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 },
+	{ 103, 0x27 }, { 112, 0x01 }, { 113, 0x0E }, { 114, 0x02 },
+	{ 115, 0x0C }, { 118, 0x0C }, { 121, 0x30 }, { 130, 0x00 },
+	{ 131, 0x00 }, { 132, 0xFC }, { 134, 0x00 }, { 136, 0x00 },
+	{ 138, 0x00 }, { 139, 0x00 }, { 140, 0x00 }, { 141, 0xFC },
+	{ 143, 0x00 }, { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 },
+	{ 149, 0x00 }, { 150, 0xFC }, { 152, 0x00 }, { 154, 0x00 },
+	{ 156, 0x00 }, { 157, 0x00 }, { 2, 0x00 },
+};
+
+static const struct omap_video_timings nec_8048_panel_timings = {
+	.x_res		= LCD_XRES,
+	.y_res		= LCD_YRES,
+	.pixelclock	= LCD_PIXEL_CLOCK,
+	.hfp		= 6,
+	.hsw		= 1,
+	.hbp		= 4,
+	.vfp		= 3,
+	.vsw		= 1,
+	.vbp		= 4,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int nec_8048_spi_send(struct spi_device *spi, unsigned char reg_addr,
+			unsigned char reg_data)
+{
+	int ret = 0;
+	unsigned int cmd = 0, data = 0;
+
+	cmd = 0x0000 | reg_addr; /* register address write */
+	data = 0x0100 | reg_data; /* register data write */
+	data = (cmd << 16) | data;
+
+	ret = spi_write(spi, (unsigned char *)&data, 4);
+	if (ret)
+		pr_err("error in spi_write %x\n", data);
+
+	return ret;
+}
+
+static int init_nec_8048_wvga_lcd(struct spi_device *spi)
+{
+	unsigned int i;
+	/* Initialization Sequence */
+	/* nec_8048_spi_send(spi, REG, VAL) */
+	for (i = 0; i < (ARRAY_SIZE(nec_8048_init_seq) - 1); i++)
+		nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
+				nec_8048_init_seq[i].dat);
+	udelay(20);
+	nec_8048_spi_send(spi, nec_8048_init_seq[i].addr,
+				nec_8048_init_seq[i].dat);
+	return 0;
+}
+
+static int nec_8048_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void nec_8048_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int nec_8048_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	in->ops.dpi->set_timings(in, &ddata->videomode);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	if (gpio_is_valid(ddata->res_gpio))
+		gpio_set_value_cansleep(ddata->res_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void nec_8048_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (gpio_is_valid(ddata->res_gpio))
+		gpio_set_value_cansleep(ddata->res_gpio, 0);
+
+	in->ops.dpi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void nec_8048_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void nec_8048_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int nec_8048_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver nec_8048_ops = {
+	.connect	= nec_8048_connect,
+	.disconnect	= nec_8048_disconnect,
+
+	.enable		= nec_8048_enable,
+	.disable	= nec_8048_disable,
+
+	.set_timings	= nec_8048_set_timings,
+	.get_timings	= nec_8048_get_timings,
+	.check_timings	= nec_8048_check_timings,
+
+	.get_resolution	= omapdss_default_get_resolution,
+};
+
+
+static int nec_8048_probe_pdata(struct spi_device *spi)
+{
+	const struct panel_nec_nl8048hl11_platform_data *pdata;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev, *in;
+
+	pdata = dev_get_platdata(&spi->dev);
+
+	ddata->qvga_gpio = pdata->qvga_gpio;
+	ddata->res_gpio = pdata->res_gpio;
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&spi->dev, "failed to find video source '%s'\n",
+				pdata->source);
+		return -EPROBE_DEFER;
+	}
+	ddata->in = in;
+
+	ddata->data_lines = pdata->data_lines;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int nec_8048_probe_of(struct spi_device *spi)
+{
+	struct device_node *node = spi->dev.of_node;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *in;
+	int gpio;
+
+	gpio = of_get_named_gpio(node, "reset-gpios", 0);
+	if (!gpio_is_valid(gpio)) {
+		dev_err(&spi->dev, "failed to parse enable gpio\n");
+		return gpio;
+	}
+	ddata->res_gpio = gpio;
+
+	/* XXX the panel spec doesn't mention any QVGA pin?? */
+	ddata->qvga_gpio = -ENOENT;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&spi->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int nec_8048_probe(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	dev_dbg(&spi->dev, "%s\n", __func__);
+
+	spi->mode = SPI_MODE_0;
+	spi->bits_per_word = 32;
+
+	r = spi_setup(spi);
+	if (r < 0) {
+		dev_err(&spi->dev, "spi_setup failed: %d\n", r);
+		return r;
+	}
+
+	init_nec_8048_wvga_lcd(spi);
+
+	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, ddata);
+
+	ddata->spi = spi;
+
+	if (dev_get_platdata(&spi->dev)) {
+		r = nec_8048_probe_pdata(spi);
+		if (r)
+			return r;
+	} else if (spi->dev.of_node) {
+		r = nec_8048_probe_of(spi);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	if (gpio_is_valid(ddata->qvga_gpio)) {
+		r = devm_gpio_request_one(&spi->dev, ddata->qvga_gpio,
+				GPIOF_OUT_INIT_HIGH, "lcd QVGA");
+		if (r)
+			goto err_gpio;
+	}
+
+	if (gpio_is_valid(ddata->res_gpio)) {
+		r = devm_gpio_request_one(&spi->dev, ddata->res_gpio,
+				GPIOF_OUT_INIT_LOW, "lcd RES");
+		if (r)
+			goto err_gpio;
+	}
+
+	ddata->videomode = nec_8048_panel_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &spi->dev;
+	dssdev->driver = &nec_8048_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&spi->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int nec_8048_remove(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
+
+	omapdss_unregister_display(dssdev);
+
+	nec_8048_disable(dssdev);
+	nec_8048_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int nec_8048_suspend(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+
+	nec_8048_spi_send(spi, 2, 0x01);
+	mdelay(40);
+
+	return 0;
+}
+
+static int nec_8048_resume(struct device *dev)
+{
+	struct spi_device *spi = to_spi_device(dev);
+
+	/* reinitialize the panel */
+	spi_setup(spi);
+	nec_8048_spi_send(spi, 2, 0x00);
+	init_nec_8048_wvga_lcd(spi);
+
+	return 0;
+}
+static SIMPLE_DEV_PM_OPS(nec_8048_pm_ops, nec_8048_suspend,
+		nec_8048_resume);
+#define NEC_8048_PM_OPS (&nec_8048_pm_ops)
+#else
+#define NEC_8048_PM_OPS NULL
+#endif
+
+static const struct of_device_id nec_8048_of_match[] = {
+	{ .compatible = "omapdss,nec,nl8048hl11", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, nec_8048_of_match);
+
+static struct spi_driver nec_8048_driver = {
+	.driver = {
+		.name	= "panel-nec-nl8048hl11",
+		.pm	= NEC_8048_PM_OPS,
+		.of_match_table = nec_8048_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe	= nec_8048_probe,
+	.remove	= nec_8048_remove,
+};
+
+module_spi_driver(nec_8048_driver);
+
+MODULE_ALIAS("spi:nec,nl8048hl11");
+MODULE_AUTHOR("Erik Gilling <konkers@android.com>");
+MODULE_DESCRIPTION("NEC-NL8048HL11 Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c
new file mode 100644
index 000000000..abfd1f6e3
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-sharp-ls037v7dw01.c
@@ -0,0 +1,415 @@
+/*
+ * LCD panel driver for Sharp LS037V7DW01
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+	struct regulator *vcc;
+
+	int data_lines;
+
+	struct omap_video_timings videomode;
+
+	struct gpio_desc *resb_gpio;	/* low = reset active min 20 us */
+	struct gpio_desc *ini_gpio;	/* high = power on */
+	struct gpio_desc *mo_gpio;	/* low = 480x640, high = 240x320 */
+	struct gpio_desc *lr_gpio;	/* high = conventional horizontal scanning */
+	struct gpio_desc *ud_gpio;	/* high = conventional vertical scanning */
+};
+
+static const struct omap_video_timings sharp_ls_timings = {
+	.x_res = 480,
+	.y_res = 640,
+
+	.pixelclock	= 19200000,
+
+	.hsw		= 2,
+	.hfp		= 1,
+	.hbp		= 28,
+
+	.vsw		= 1,
+	.vfp		= 1,
+	.vbp		= 1,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int sharp_ls_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void sharp_ls_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int sharp_ls_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	in->ops.dpi->set_timings(in, &ddata->videomode);
+
+	if (ddata->vcc) {
+		r = regulator_enable(ddata->vcc);
+		if (r != 0)
+			return r;
+	}
+
+	r = in->ops.dpi->enable(in);
+	if (r) {
+		regulator_disable(ddata->vcc);
+		return r;
+	}
+
+	/* wait couple of vsyncs until enabling the LCD */
+	msleep(50);
+
+	if (ddata->resb_gpio)
+		gpiod_set_value_cansleep(ddata->resb_gpio, 1);
+
+	if (ddata->ini_gpio)
+		gpiod_set_value_cansleep(ddata->ini_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void sharp_ls_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (ddata->ini_gpio)
+		gpiod_set_value_cansleep(ddata->ini_gpio, 0);
+
+	if (ddata->resb_gpio)
+		gpiod_set_value_cansleep(ddata->resb_gpio, 0);
+
+	/* wait at least 5 vsyncs after disabling the LCD */
+
+	msleep(100);
+
+	in->ops.dpi->disable(in);
+
+	if (ddata->vcc)
+		regulator_disable(ddata->vcc);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void sharp_ls_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void sharp_ls_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int sharp_ls_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver sharp_ls_ops = {
+	.connect	= sharp_ls_connect,
+	.disconnect	= sharp_ls_disconnect,
+
+	.enable		= sharp_ls_enable,
+	.disable	= sharp_ls_disable,
+
+	.set_timings	= sharp_ls_set_timings,
+	.get_timings	= sharp_ls_get_timings,
+	.check_timings	= sharp_ls_check_timings,
+
+	.get_resolution	= omapdss_default_get_resolution,
+};
+
+static int sharp_ls_get_gpio(struct device *dev, int gpio, unsigned long flags,
+		  char *desc, struct gpio_desc **gpiod)
+{
+	struct gpio_desc *gd;
+	int r;
+
+	*gpiod = NULL;
+
+	r = devm_gpio_request_one(dev, gpio, flags, desc);
+	if (r)
+		return r == -ENOENT ? 0 : r;
+
+	gd = gpio_to_desc(gpio);
+	if (IS_ERR(gd))
+		return PTR_ERR(gd) == -ENOENT ? 0 : PTR_ERR(gd);
+
+	*gpiod = gd;
+	return 0;
+}
+
+static int sharp_ls_probe_pdata(struct platform_device *pdev)
+{
+	const struct panel_sharp_ls037v7dw01_platform_data *pdata;
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev, *in;
+	int r;
+
+	pdata = dev_get_platdata(&pdev->dev);
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&pdev->dev, "failed to find video source '%s'\n",
+				pdata->source);
+		return -EPROBE_DEFER;
+	}
+
+	ddata->in = in;
+
+	ddata->data_lines = pdata->data_lines;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	r = sharp_ls_get_gpio(&pdev->dev, pdata->mo_gpio, GPIOF_OUT_INIT_LOW,
+		"lcd MO", &ddata->mo_gpio);
+	if (r)
+		return r;
+	r = sharp_ls_get_gpio(&pdev->dev, pdata->lr_gpio, GPIOF_OUT_INIT_HIGH,
+		"lcd LR", &ddata->lr_gpio);
+	if (r)
+		return r;
+	r = sharp_ls_get_gpio(&pdev->dev, pdata->ud_gpio, GPIOF_OUT_INIT_HIGH,
+		"lcd UD", &ddata->ud_gpio);
+	if (r)
+		return r;
+	r = sharp_ls_get_gpio(&pdev->dev, pdata->resb_gpio, GPIOF_OUT_INIT_LOW,
+		"lcd RESB", &ddata->resb_gpio);
+	if (r)
+		return r;
+	r = sharp_ls_get_gpio(&pdev->dev, pdata->ini_gpio, GPIOF_OUT_INIT_LOW,
+		"lcd INI", &ddata->ini_gpio);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static  int sharp_ls_get_gpio_of(struct device *dev, int index, int val,
+	const char *desc, struct gpio_desc **gpiod)
+{
+	struct gpio_desc *gd;
+
+	*gpiod = NULL;
+
+	gd = devm_gpiod_get_index(dev, desc, index, GPIOD_OUT_LOW);
+	if (IS_ERR(gd))
+		return PTR_ERR(gd);
+
+	*gpiod = gd;
+	return 0;
+}
+
+static int sharp_ls_probe_of(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct device_node *node = pdev->dev.of_node;
+	struct omap_dss_device *in;
+	int r;
+
+	ddata->vcc = devm_regulator_get(&pdev->dev, "envdd");
+	if (IS_ERR(ddata->vcc)) {
+		dev_err(&pdev->dev, "failed to get regulator\n");
+		return PTR_ERR(ddata->vcc);
+	}
+
+	/* lcd INI */
+	r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "enable", &ddata->ini_gpio);
+	if (r)
+		return r;
+
+	/* lcd RESB */
+	r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "reset", &ddata->resb_gpio);
+	if (r)
+		return r;
+
+	/* lcd MO */
+	r = sharp_ls_get_gpio_of(&pdev->dev, 0, 0, "mode", &ddata->mo_gpio);
+	if (r)
+		return r;
+
+	/* lcd LR */
+	r = sharp_ls_get_gpio_of(&pdev->dev, 1, 1, "mode", &ddata->lr_gpio);
+	if (r)
+		return r;
+
+	/* lcd UD */
+	r = sharp_ls_get_gpio_of(&pdev->dev, 2, 1, "mode", &ddata->ud_gpio);
+	if (r)
+		return r;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int sharp_ls_probe(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	if (dev_get_platdata(&pdev->dev)) {
+		r = sharp_ls_probe_pdata(pdev);
+		if (r)
+			return r;
+	} else if (pdev->dev.of_node) {
+		r = sharp_ls_probe_of(pdev);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	ddata->videomode = sharp_ls_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &pdev->dev;
+	dssdev->driver = &sharp_ls_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+	dssdev->phy.dpi.data_lines = ddata->data_lines;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit sharp_ls_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_display(dssdev);
+
+	sharp_ls_disable(dssdev);
+	sharp_ls_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id sharp_ls_of_match[] = {
+	{ .compatible = "omapdss,sharp,ls037v7dw01", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, sharp_ls_of_match);
+
+static struct platform_driver sharp_ls_driver = {
+	.probe = sharp_ls_probe,
+	.remove = __exit_p(sharp_ls_remove),
+	.driver = {
+		.name = "panel-sharp-ls037v7dw01",
+		.of_match_table = sharp_ls_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_platform_driver(sharp_ls_driver);
+
+MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
+MODULE_DESCRIPTION("Sharp LS037V7DW01 Panel Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
new file mode 100644
index 000000000..31efcca80
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c
@@ -0,0 +1,917 @@
+/*
+ * Sony ACX565AKM LCD Panel driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * Original Driver Author: Imre Deak <imre.deak@nokia.com>
+ * Based on panel-generic.c by Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ * Adapted to new DSS2 framework: Roger Quadros <roger.quadros@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+#define MIPID_CMD_READ_DISP_ID		0x04
+#define MIPID_CMD_READ_RED		0x06
+#define MIPID_CMD_READ_GREEN		0x07
+#define MIPID_CMD_READ_BLUE		0x08
+#define MIPID_CMD_READ_DISP_STATUS	0x09
+#define MIPID_CMD_RDDSDR		0x0F
+#define MIPID_CMD_SLEEP_IN		0x10
+#define MIPID_CMD_SLEEP_OUT		0x11
+#define MIPID_CMD_DISP_OFF		0x28
+#define MIPID_CMD_DISP_ON		0x29
+#define MIPID_CMD_WRITE_DISP_BRIGHTNESS	0x51
+#define MIPID_CMD_READ_DISP_BRIGHTNESS	0x52
+#define MIPID_CMD_WRITE_CTRL_DISP	0x53
+
+#define CTRL_DISP_BRIGHTNESS_CTRL_ON	(1 << 5)
+#define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON	(1 << 4)
+#define CTRL_DISP_BACKLIGHT_ON		(1 << 2)
+#define CTRL_DISP_AUTO_BRIGHTNESS_ON	(1 << 1)
+
+#define MIPID_CMD_READ_CTRL_DISP	0x54
+#define MIPID_CMD_WRITE_CABC		0x55
+#define MIPID_CMD_READ_CABC		0x56
+
+#define MIPID_VER_LPH8923		3
+#define MIPID_VER_LS041Y3		4
+#define MIPID_VER_L4F00311		8
+#define MIPID_VER_ACX565AKM		9
+
+struct panel_drv_data {
+	struct omap_dss_device	dssdev;
+	struct omap_dss_device *in;
+
+	int reset_gpio;
+	int datapairs;
+
+	struct omap_video_timings videomode;
+
+	char		*name;
+	int		enabled;
+	int		model;
+	int		revision;
+	u8		display_id[3];
+	unsigned	has_bc:1;
+	unsigned	has_cabc:1;
+	unsigned	cabc_mode;
+	unsigned long	hw_guard_end;		/* next value of jiffies
+						   when we can issue the
+						   next sleep in/out command */
+	unsigned long	hw_guard_wait;		/* max guard time in jiffies */
+
+	struct spi_device	*spi;
+	struct mutex		mutex;
+
+	struct backlight_device *bl_dev;
+};
+
+static const struct omap_video_timings acx565akm_panel_timings = {
+	.x_res		= 800,
+	.y_res		= 480,
+	.pixelclock	= 24000000,
+	.hfp		= 28,
+	.hsw		= 4,
+	.hbp		= 24,
+	.vfp		= 3,
+	.vsw		= 3,
+	.vbp		= 4,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static void acx565akm_transfer(struct panel_drv_data *ddata, int cmd,
+			      const u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+	struct spi_message	m;
+	struct spi_transfer	*x, xfer[5];
+	int			r;
+
+	BUG_ON(ddata->spi == NULL);
+
+	spi_message_init(&m);
+
+	memset(xfer, 0, sizeof(xfer));
+	x = &xfer[0];
+
+	cmd &=  0xff;
+	x->tx_buf = &cmd;
+	x->bits_per_word = 9;
+	x->len = 2;
+
+	if (rlen > 1 && wlen == 0) {
+		/*
+		 * Between the command and the response data there is a
+		 * dummy clock cycle. Add an extra bit after the command
+		 * word to account for this.
+		 */
+		x->bits_per_word = 10;
+		cmd <<= 1;
+	}
+	spi_message_add_tail(x, &m);
+
+	if (wlen) {
+		x++;
+		x->tx_buf = wbuf;
+		x->len = wlen;
+		x->bits_per_word = 9;
+		spi_message_add_tail(x, &m);
+	}
+
+	if (rlen) {
+		x++;
+		x->rx_buf	= rbuf;
+		x->len		= rlen;
+		spi_message_add_tail(x, &m);
+	}
+
+	r = spi_sync(ddata->spi, &m);
+	if (r < 0)
+		dev_dbg(&ddata->spi->dev, "spi_sync %d\n", r);
+}
+
+static inline void acx565akm_cmd(struct panel_drv_data *ddata, int cmd)
+{
+	acx565akm_transfer(ddata, cmd, NULL, 0, NULL, 0);
+}
+
+static inline void acx565akm_write(struct panel_drv_data *ddata,
+			       int reg, const u8 *buf, int len)
+{
+	acx565akm_transfer(ddata, reg, buf, len, NULL, 0);
+}
+
+static inline void acx565akm_read(struct panel_drv_data *ddata,
+			      int reg, u8 *buf, int len)
+{
+	acx565akm_transfer(ddata, reg, NULL, 0, buf, len);
+}
+
+static void hw_guard_start(struct panel_drv_data *ddata, int guard_msec)
+{
+	ddata->hw_guard_wait = msecs_to_jiffies(guard_msec);
+	ddata->hw_guard_end = jiffies + ddata->hw_guard_wait;
+}
+
+static void hw_guard_wait(struct panel_drv_data *ddata)
+{
+	unsigned long wait = ddata->hw_guard_end - jiffies;
+
+	if ((long)wait > 0 && wait <= ddata->hw_guard_wait) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		schedule_timeout(wait);
+	}
+}
+
+static void set_sleep_mode(struct panel_drv_data *ddata, int on)
+{
+	int cmd;
+
+	if (on)
+		cmd = MIPID_CMD_SLEEP_IN;
+	else
+		cmd = MIPID_CMD_SLEEP_OUT;
+	/*
+	 * We have to keep 120msec between sleep in/out commands.
+	 * (8.2.15, 8.2.16).
+	 */
+	hw_guard_wait(ddata);
+	acx565akm_cmd(ddata, cmd);
+	hw_guard_start(ddata, 120);
+}
+
+static void set_display_state(struct panel_drv_data *ddata, int enabled)
+{
+	int cmd = enabled ? MIPID_CMD_DISP_ON : MIPID_CMD_DISP_OFF;
+
+	acx565akm_cmd(ddata, cmd);
+}
+
+static int panel_enabled(struct panel_drv_data *ddata)
+{
+	u32 disp_status;
+	int enabled;
+
+	acx565akm_read(ddata, MIPID_CMD_READ_DISP_STATUS,
+			(u8 *)&disp_status, 4);
+	disp_status = __be32_to_cpu(disp_status);
+	enabled = (disp_status & (1 << 17)) && (disp_status & (1 << 10));
+	dev_dbg(&ddata->spi->dev,
+		"LCD panel %senabled by bootloader (status 0x%04x)\n",
+		enabled ? "" : "not ", disp_status);
+	return enabled;
+}
+
+static int panel_detect(struct panel_drv_data *ddata)
+{
+	acx565akm_read(ddata, MIPID_CMD_READ_DISP_ID, ddata->display_id, 3);
+	dev_dbg(&ddata->spi->dev, "MIPI display ID: %02x%02x%02x\n",
+		ddata->display_id[0],
+		ddata->display_id[1],
+		ddata->display_id[2]);
+
+	switch (ddata->display_id[0]) {
+	case 0x10:
+		ddata->model = MIPID_VER_ACX565AKM;
+		ddata->name = "acx565akm";
+		ddata->has_bc = 1;
+		ddata->has_cabc = 1;
+		break;
+	case 0x29:
+		ddata->model = MIPID_VER_L4F00311;
+		ddata->name = "l4f00311";
+		break;
+	case 0x45:
+		ddata->model = MIPID_VER_LPH8923;
+		ddata->name = "lph8923";
+		break;
+	case 0x83:
+		ddata->model = MIPID_VER_LS041Y3;
+		ddata->name = "ls041y3";
+		break;
+	default:
+		ddata->name = "unknown";
+		dev_err(&ddata->spi->dev, "invalid display ID\n");
+		return -ENODEV;
+	}
+
+	ddata->revision = ddata->display_id[1];
+
+	dev_info(&ddata->spi->dev, "omapfb: %s rev %02x LCD detected\n",
+			ddata->name, ddata->revision);
+
+	return 0;
+}
+
+/*----------------------Backlight Control-------------------------*/
+
+static void enable_backlight_ctrl(struct panel_drv_data *ddata, int enable)
+{
+	u16 ctrl;
+
+	acx565akm_read(ddata, MIPID_CMD_READ_CTRL_DISP, (u8 *)&ctrl, 1);
+	if (enable) {
+		ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON |
+			CTRL_DISP_BACKLIGHT_ON;
+	} else {
+		ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON |
+			  CTRL_DISP_BACKLIGHT_ON);
+	}
+
+	ctrl |= 1 << 8;
+	acx565akm_write(ddata, MIPID_CMD_WRITE_CTRL_DISP, (u8 *)&ctrl, 2);
+}
+
+static void set_cabc_mode(struct panel_drv_data *ddata, unsigned mode)
+{
+	u16 cabc_ctrl;
+
+	ddata->cabc_mode = mode;
+	if (!ddata->enabled)
+		return;
+	cabc_ctrl = 0;
+	acx565akm_read(ddata, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1);
+	cabc_ctrl &= ~3;
+	cabc_ctrl |= (1 << 8) | (mode & 3);
+	acx565akm_write(ddata, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2);
+}
+
+static unsigned get_cabc_mode(struct panel_drv_data *ddata)
+{
+	return ddata->cabc_mode;
+}
+
+static unsigned get_hw_cabc_mode(struct panel_drv_data *ddata)
+{
+	u8 cabc_ctrl;
+
+	acx565akm_read(ddata, MIPID_CMD_READ_CABC, &cabc_ctrl, 1);
+	return cabc_ctrl & 3;
+}
+
+static void acx565akm_set_brightness(struct panel_drv_data *ddata, int level)
+{
+	int bv;
+
+	bv = level | (1 << 8);
+	acx565akm_write(ddata, MIPID_CMD_WRITE_DISP_BRIGHTNESS, (u8 *)&bv, 2);
+
+	if (level)
+		enable_backlight_ctrl(ddata, 1);
+	else
+		enable_backlight_ctrl(ddata, 0);
+}
+
+static int acx565akm_get_actual_brightness(struct panel_drv_data *ddata)
+{
+	u8 bv;
+
+	acx565akm_read(ddata, MIPID_CMD_READ_DISP_BRIGHTNESS, &bv, 1);
+
+	return bv;
+}
+
+
+static int acx565akm_bl_update_status(struct backlight_device *dev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
+	int level;
+
+	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
+
+	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
+			dev->props.power == FB_BLANK_UNBLANK)
+		level = dev->props.brightness;
+	else
+		level = 0;
+
+	if (ddata->has_bc)
+		acx565akm_set_brightness(ddata, level);
+	else
+		return -ENODEV;
+
+	return 0;
+}
+
+static int acx565akm_bl_get_intensity(struct backlight_device *dev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
+
+	dev_dbg(&dev->dev, "%s\n", __func__);
+
+	if (!ddata->has_bc)
+		return -ENODEV;
+
+	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
+			dev->props.power == FB_BLANK_UNBLANK) {
+		if (ddata->has_bc)
+			return acx565akm_get_actual_brightness(ddata);
+		else
+			return dev->props.brightness;
+	}
+
+	return 0;
+}
+
+static int acx565akm_bl_update_status_locked(struct backlight_device *dev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
+	int r;
+
+	mutex_lock(&ddata->mutex);
+	r = acx565akm_bl_update_status(dev);
+	mutex_unlock(&ddata->mutex);
+
+	return r;
+}
+
+static int acx565akm_bl_get_intensity_locked(struct backlight_device *dev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&dev->dev);
+	int r;
+
+	mutex_lock(&ddata->mutex);
+	r = acx565akm_bl_get_intensity(dev);
+	mutex_unlock(&ddata->mutex);
+
+	return r;
+}
+
+static const struct backlight_ops acx565akm_bl_ops = {
+	.get_brightness = acx565akm_bl_get_intensity_locked,
+	.update_status  = acx565akm_bl_update_status_locked,
+};
+
+/*--------------------Auto Brightness control via Sysfs---------------------*/
+
+static const char * const cabc_modes[] = {
+	"off",		/* always used when CABC is not supported */
+	"ui",
+	"still-image",
+	"moving-image",
+};
+
+static ssize_t show_cabc_mode(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	const char *mode_str;
+	int mode;
+	int len;
+
+	if (!ddata->has_cabc)
+		mode = 0;
+	else
+		mode = get_cabc_mode(ddata);
+	mode_str = "unknown";
+	if (mode >= 0 && mode < ARRAY_SIZE(cabc_modes))
+		mode_str = cabc_modes[mode];
+	len = snprintf(buf, PAGE_SIZE, "%s\n", mode_str);
+
+	return len < PAGE_SIZE - 1 ? len : PAGE_SIZE - 1;
+}
+
+static ssize_t store_cabc_mode(struct device *dev,
+		struct device_attribute *attr,
+		const char *buf, size_t count)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(cabc_modes); i++) {
+		const char *mode_str = cabc_modes[i];
+		int cmp_len = strlen(mode_str);
+
+		if (count > 0 && buf[count - 1] == '\n')
+			count--;
+		if (count != cmp_len)
+			continue;
+
+		if (strncmp(buf, mode_str, cmp_len) == 0)
+			break;
+	}
+
+	if (i == ARRAY_SIZE(cabc_modes))
+		return -EINVAL;
+
+	if (!ddata->has_cabc && i != 0)
+		return -EINVAL;
+
+	mutex_lock(&ddata->mutex);
+	set_cabc_mode(ddata, i);
+	mutex_unlock(&ddata->mutex);
+
+	return count;
+}
+
+static ssize_t show_cabc_available_modes(struct device *dev,
+		struct device_attribute *attr,
+		char *buf)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	int len;
+	int i;
+
+	if (!ddata->has_cabc)
+		return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]);
+
+	for (i = 0, len = 0;
+	     len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
+		len += snprintf(&buf[len], PAGE_SIZE - len, "%s%s%s",
+			i ? " " : "", cabc_modes[i],
+			i == ARRAY_SIZE(cabc_modes) - 1 ? "\n" : "");
+
+	return len < PAGE_SIZE ? len : PAGE_SIZE - 1;
+}
+
+static DEVICE_ATTR(cabc_mode, S_IRUGO | S_IWUSR,
+		show_cabc_mode, store_cabc_mode);
+static DEVICE_ATTR(cabc_available_modes, S_IRUGO,
+		show_cabc_available_modes, NULL);
+
+static struct attribute *bldev_attrs[] = {
+	&dev_attr_cabc_mode.attr,
+	&dev_attr_cabc_available_modes.attr,
+	NULL,
+};
+
+static struct attribute_group bldev_attr_group = {
+	.attrs = bldev_attrs,
+};
+
+static int acx565akm_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.sdi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void acx565akm_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.sdi->disconnect(in, dssdev);
+}
+
+static int acx565akm_panel_power_on(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
+
+	in->ops.sdi->set_timings(in, &ddata->videomode);
+
+	if (ddata->datapairs > 0)
+		in->ops.sdi->set_datapairs(in, ddata->datapairs);
+
+	r = in->ops.sdi->enable(in);
+	if (r) {
+		pr_err("%s sdi enable failed\n", __func__);
+		return r;
+	}
+
+	/*FIXME tweak me */
+	msleep(50);
+
+	if (gpio_is_valid(ddata->reset_gpio))
+		gpio_set_value(ddata->reset_gpio, 1);
+
+	if (ddata->enabled) {
+		dev_dbg(&ddata->spi->dev, "panel already enabled\n");
+		return 0;
+	}
+
+	/*
+	 * We have to meet all the following delay requirements:
+	 * 1. tRW: reset pulse width 10usec (7.12.1)
+	 * 2. tRT: reset cancel time 5msec (7.12.1)
+	 * 3. Providing PCLK,HS,VS signals for 2 frames = ~50msec worst
+	 *    case (7.6.2)
+	 * 4. 120msec before the sleep out command (7.12.1)
+	 */
+	msleep(120);
+
+	set_sleep_mode(ddata, 0);
+	ddata->enabled = 1;
+
+	/* 5msec between sleep out and the next command. (8.2.16) */
+	usleep_range(5000, 10000);
+	set_display_state(ddata, 1);
+	set_cabc_mode(ddata, ddata->cabc_mode);
+
+	return acx565akm_bl_update_status(ddata->bl_dev);
+}
+
+static void acx565akm_panel_power_off(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "%s\n", __func__);
+
+	if (!ddata->enabled)
+		return;
+
+	set_display_state(ddata, 0);
+	set_sleep_mode(ddata, 1);
+	ddata->enabled = 0;
+	/*
+	 * We have to provide PCLK,HS,VS signals for 2 frames (worst case
+	 * ~50msec) after sending the sleep in command and asserting the
+	 * reset signal. We probably could assert the reset w/o the delay
+	 * but we still delay to avoid possible artifacts. (7.6.1)
+	 */
+	msleep(50);
+
+	if (gpio_is_valid(ddata->reset_gpio))
+		gpio_set_value(ddata->reset_gpio, 0);
+
+	/* FIXME need to tweak this delay */
+	msleep(100);
+
+	in->ops.sdi->disable(in);
+}
+
+static int acx565akm_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	int r;
+
+	dev_dbg(dssdev->dev, "%s\n", __func__);
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	mutex_lock(&ddata->mutex);
+	r = acx565akm_panel_power_on(dssdev);
+	mutex_unlock(&ddata->mutex);
+	if (r)
+		return r;
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void acx565akm_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	dev_dbg(dssdev->dev, "%s\n", __func__);
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	mutex_lock(&ddata->mutex);
+	acx565akm_panel_power_off(dssdev);
+	mutex_unlock(&ddata->mutex);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void acx565akm_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.sdi->set_timings(in, timings);
+}
+
+static void acx565akm_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int acx565akm_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.sdi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver acx565akm_ops = {
+	.connect	= acx565akm_connect,
+	.disconnect	= acx565akm_disconnect,
+
+	.enable		= acx565akm_enable,
+	.disable	= acx565akm_disable,
+
+	.set_timings	= acx565akm_set_timings,
+	.get_timings	= acx565akm_get_timings,
+	.check_timings	= acx565akm_check_timings,
+
+	.get_resolution	= omapdss_default_get_resolution,
+};
+
+static int acx565akm_probe_pdata(struct spi_device *spi)
+{
+	const struct panel_acx565akm_platform_data *pdata;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev, *in;
+
+	pdata = dev_get_platdata(&spi->dev);
+
+	ddata->reset_gpio = pdata->reset_gpio;
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&spi->dev, "failed to find video source '%s'\n",
+				pdata->source);
+		return -EPROBE_DEFER;
+	}
+	ddata->in = in;
+
+	ddata->datapairs = pdata->datapairs;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int acx565akm_probe_of(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct device_node *np = spi->dev.of_node;
+
+	ddata->reset_gpio = of_get_named_gpio(np, "reset-gpios", 0);
+
+	ddata->in = omapdss_of_find_source_for_first_ep(np);
+	if (IS_ERR(ddata->in)) {
+		dev_err(&spi->dev, "failed to find video source\n");
+		return PTR_ERR(ddata->in);
+	}
+
+	return 0;
+}
+
+static int acx565akm_probe(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	struct backlight_device *bldev;
+	int max_brightness, brightness;
+	struct backlight_properties props;
+	int r;
+
+	dev_dbg(&spi->dev, "%s\n", __func__);
+
+	spi->mode = SPI_MODE_3;
+
+	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, ddata);
+
+	ddata->spi = spi;
+
+	mutex_init(&ddata->mutex);
+
+	if (dev_get_platdata(&spi->dev)) {
+		r = acx565akm_probe_pdata(spi);
+		if (r)
+			return r;
+	} else if (spi->dev.of_node) {
+		r = acx565akm_probe_of(spi);
+		if (r)
+			return r;
+	} else {
+		dev_err(&spi->dev, "platform data missing!\n");
+		return -ENODEV;
+	}
+
+	if (gpio_is_valid(ddata->reset_gpio)) {
+		r = devm_gpio_request_one(&spi->dev, ddata->reset_gpio,
+				GPIOF_OUT_INIT_LOW, "lcd reset");
+		if (r)
+			goto err_gpio;
+	}
+
+	if (gpio_is_valid(ddata->reset_gpio))
+		gpio_set_value(ddata->reset_gpio, 1);
+
+	/*
+	 * After reset we have to wait 5 msec before the first
+	 * command can be sent.
+	 */
+	usleep_range(5000, 10000);
+
+	ddata->enabled = panel_enabled(ddata);
+
+	r = panel_detect(ddata);
+
+	if (!ddata->enabled && gpio_is_valid(ddata->reset_gpio))
+		gpio_set_value(ddata->reset_gpio, 0);
+
+	if (r) {
+		dev_err(&spi->dev, "%s panel detect error\n", __func__);
+		goto err_detect;
+	}
+
+	memset(&props, 0, sizeof(props));
+	props.fb_blank = FB_BLANK_UNBLANK;
+	props.power = FB_BLANK_UNBLANK;
+	props.type = BACKLIGHT_RAW;
+
+	bldev = backlight_device_register("acx565akm", &ddata->spi->dev,
+			ddata, &acx565akm_bl_ops, &props);
+	if (IS_ERR(bldev)) {
+		r = PTR_ERR(bldev);
+		goto err_reg_bl;
+	}
+	ddata->bl_dev = bldev;
+	if (ddata->has_cabc) {
+		r = sysfs_create_group(&bldev->dev.kobj, &bldev_attr_group);
+		if (r) {
+			dev_err(&bldev->dev,
+				"%s failed to create sysfs files\n", __func__);
+			goto err_sysfs;
+		}
+		ddata->cabc_mode = get_hw_cabc_mode(ddata);
+	}
+
+	max_brightness = 255;
+
+	if (ddata->has_bc)
+		brightness = acx565akm_get_actual_brightness(ddata);
+	else
+		brightness = 0;
+
+	bldev->props.max_brightness = max_brightness;
+	bldev->props.brightness = brightness;
+
+	acx565akm_bl_update_status(bldev);
+
+
+	ddata->videomode = acx565akm_panel_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &spi->dev;
+	dssdev->driver = &acx565akm_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_SDI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&spi->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+	sysfs_remove_group(&bldev->dev.kobj, &bldev_attr_group);
+err_sysfs:
+	backlight_device_unregister(bldev);
+err_reg_bl:
+err_detect:
+err_gpio:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int acx565akm_remove(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
+
+	sysfs_remove_group(&ddata->bl_dev->dev.kobj, &bldev_attr_group);
+	backlight_device_unregister(ddata->bl_dev);
+
+	omapdss_unregister_display(dssdev);
+
+	acx565akm_disable(dssdev);
+	acx565akm_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id acx565akm_of_match[] = {
+	{ .compatible = "omapdss,sony,acx565akm", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, acx565akm_of_match);
+
+static struct spi_driver acx565akm_driver = {
+	.driver = {
+		.name	= "acx565akm",
+		.of_match_table = acx565akm_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe	= acx565akm_probe,
+	.remove	= acx565akm_remove,
+};
+
+module_spi_driver(acx565akm_driver);
+
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_DESCRIPTION("acx565akm LCD Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c
new file mode 100644
index 000000000..4d657f3ab
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c
@@ -0,0 +1,511 @@
+/*
+ * Toppoly TD028TTEC1 panel support
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * Neo 1973 code (jbt6k74.c):
+ * Copyright (C) 2006-2007 by OpenMoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ *
+ * Ported and adapted from Neo 1973 U-Boot by:
+ * H. Nikolaus Schaller <hns@goldelico.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio.h>
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	int data_lines;
+
+	struct omap_video_timings videomode;
+
+	struct spi_device *spi_dev;
+};
+
+static struct omap_video_timings td028ttec1_panel_timings = {
+	.x_res		= 480,
+	.y_res		= 640,
+	.pixelclock	= 22153000,
+	.hfp		= 24,
+	.hsw		= 8,
+	.hbp		= 8,
+	.vfp		= 4,
+	.vsw		= 2,
+	.vbp		= 2,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+};
+
+#define JBT_COMMAND	0x000
+#define JBT_DATA	0x100
+
+static int jbt_ret_write_0(struct panel_drv_data *ddata, u8 reg)
+{
+	int rc;
+	u16 tx_buf = JBT_COMMAND | reg;
+
+	rc = spi_write(ddata->spi_dev, (u8 *)&tx_buf,
+			1*sizeof(u16));
+	if (rc != 0)
+		dev_err(&ddata->spi_dev->dev,
+			"jbt_ret_write_0 spi_write ret %d\n", rc);
+
+	return rc;
+}
+
+static int jbt_reg_write_1(struct panel_drv_data *ddata, u8 reg, u8 data)
+{
+	int rc;
+	u16 tx_buf[2];
+
+	tx_buf[0] = JBT_COMMAND | reg;
+	tx_buf[1] = JBT_DATA | data;
+	rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
+			2*sizeof(u16));
+	if (rc != 0)
+		dev_err(&ddata->spi_dev->dev,
+			"jbt_reg_write_1 spi_write ret %d\n", rc);
+
+	return rc;
+}
+
+static int jbt_reg_write_2(struct panel_drv_data *ddata, u8 reg, u16 data)
+{
+	int rc;
+	u16 tx_buf[3];
+
+	tx_buf[0] = JBT_COMMAND | reg;
+	tx_buf[1] = JBT_DATA | (data >> 8);
+	tx_buf[2] = JBT_DATA | (data & 0xff);
+
+	rc = spi_write(ddata->spi_dev, (u8 *)tx_buf,
+			3*sizeof(u16));
+
+	if (rc != 0)
+		dev_err(&ddata->spi_dev->dev,
+			"jbt_reg_write_2 spi_write ret %d\n", rc);
+
+	return rc;
+}
+
+enum jbt_register {
+	JBT_REG_SLEEP_IN		= 0x10,
+	JBT_REG_SLEEP_OUT		= 0x11,
+
+	JBT_REG_DISPLAY_OFF		= 0x28,
+	JBT_REG_DISPLAY_ON		= 0x29,
+
+	JBT_REG_RGB_FORMAT		= 0x3a,
+	JBT_REG_QUAD_RATE		= 0x3b,
+
+	JBT_REG_POWER_ON_OFF		= 0xb0,
+	JBT_REG_BOOSTER_OP		= 0xb1,
+	JBT_REG_BOOSTER_MODE		= 0xb2,
+	JBT_REG_BOOSTER_FREQ		= 0xb3,
+	JBT_REG_OPAMP_SYSCLK		= 0xb4,
+	JBT_REG_VSC_VOLTAGE		= 0xb5,
+	JBT_REG_VCOM_VOLTAGE		= 0xb6,
+	JBT_REG_EXT_DISPL		= 0xb7,
+	JBT_REG_OUTPUT_CONTROL		= 0xb8,
+	JBT_REG_DCCLK_DCEV		= 0xb9,
+	JBT_REG_DISPLAY_MODE1		= 0xba,
+	JBT_REG_DISPLAY_MODE2		= 0xbb,
+	JBT_REG_DISPLAY_MODE		= 0xbc,
+	JBT_REG_ASW_SLEW		= 0xbd,
+	JBT_REG_DUMMY_DISPLAY		= 0xbe,
+	JBT_REG_DRIVE_SYSTEM		= 0xbf,
+
+	JBT_REG_SLEEP_OUT_FR_A		= 0xc0,
+	JBT_REG_SLEEP_OUT_FR_B		= 0xc1,
+	JBT_REG_SLEEP_OUT_FR_C		= 0xc2,
+	JBT_REG_SLEEP_IN_LCCNT_D	= 0xc3,
+	JBT_REG_SLEEP_IN_LCCNT_E	= 0xc4,
+	JBT_REG_SLEEP_IN_LCCNT_F	= 0xc5,
+	JBT_REG_SLEEP_IN_LCCNT_G	= 0xc6,
+
+	JBT_REG_GAMMA1_FINE_1		= 0xc7,
+	JBT_REG_GAMMA1_FINE_2		= 0xc8,
+	JBT_REG_GAMMA1_INCLINATION	= 0xc9,
+	JBT_REG_GAMMA1_BLUE_OFFSET	= 0xca,
+
+	JBT_REG_BLANK_CONTROL		= 0xcf,
+	JBT_REG_BLANK_TH_TV		= 0xd0,
+	JBT_REG_CKV_ON_OFF		= 0xd1,
+	JBT_REG_CKV_1_2			= 0xd2,
+	JBT_REG_OEV_TIMING		= 0xd3,
+	JBT_REG_ASW_TIMING_1		= 0xd4,
+	JBT_REG_ASW_TIMING_2		= 0xd5,
+
+	JBT_REG_HCLOCK_VGA		= 0xec,
+	JBT_REG_HCLOCK_QVGA		= 0xed,
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int td028ttec1_panel_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void td028ttec1_panel_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	in->ops.dpi->set_timings(in, &ddata->videomode);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	dev_dbg(dssdev->dev, "td028ttec1_panel_enable() - state %d\n",
+		dssdev->state);
+
+	/* three times command zero */
+	r |= jbt_ret_write_0(ddata, 0x00);
+	usleep_range(1000, 2000);
+	r |= jbt_ret_write_0(ddata, 0x00);
+	usleep_range(1000, 2000);
+	r |= jbt_ret_write_0(ddata, 0x00);
+	usleep_range(1000, 2000);
+
+	if (r) {
+		dev_warn(dssdev->dev, "transfer error\n");
+		goto transfer_err;
+	}
+
+	/* deep standby out */
+	r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x17);
+
+	/* RGB I/F on, RAM write off, QVGA through, SIGCON enable */
+	r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE, 0x80);
+
+	/* Quad mode off */
+	r |= jbt_reg_write_1(ddata, JBT_REG_QUAD_RATE, 0x00);
+
+	/* AVDD on, XVDD on */
+	r |= jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x16);
+
+	/* Output control */
+	r |= jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0xfff9);
+
+	/* Sleep mode off */
+	r |= jbt_ret_write_0(ddata, JBT_REG_SLEEP_OUT);
+
+	/* at this point we have like 50% grey */
+
+	/* initialize register set */
+	r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE1, 0x01);
+	r |= jbt_reg_write_1(ddata, JBT_REG_DISPLAY_MODE2, 0x00);
+	r |= jbt_reg_write_1(ddata, JBT_REG_RGB_FORMAT, 0x60);
+	r |= jbt_reg_write_1(ddata, JBT_REG_DRIVE_SYSTEM, 0x10);
+	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_OP, 0x56);
+	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_MODE, 0x33);
+	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
+	r |= jbt_reg_write_1(ddata, JBT_REG_BOOSTER_FREQ, 0x11);
+	r |= jbt_reg_write_1(ddata, JBT_REG_OPAMP_SYSCLK, 0x02);
+	r |= jbt_reg_write_1(ddata, JBT_REG_VSC_VOLTAGE, 0x2b);
+	r |= jbt_reg_write_1(ddata, JBT_REG_VCOM_VOLTAGE, 0x40);
+	r |= jbt_reg_write_1(ddata, JBT_REG_EXT_DISPL, 0x03);
+	r |= jbt_reg_write_1(ddata, JBT_REG_DCCLK_DCEV, 0x04);
+	/*
+	 * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
+	 * to avoid red / blue flicker
+	 */
+	r |= jbt_reg_write_1(ddata, JBT_REG_ASW_SLEW, 0x04);
+	r |= jbt_reg_write_1(ddata, JBT_REG_DUMMY_DISPLAY, 0x00);
+
+	r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_A, 0x11);
+	r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_B, 0x11);
+	r |= jbt_reg_write_1(ddata, JBT_REG_SLEEP_OUT_FR_C, 0x11);
+	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
+	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
+	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
+	r |= jbt_reg_write_2(ddata, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
+
+	r |= jbt_reg_write_2(ddata, JBT_REG_GAMMA1_FINE_1, 0x5533);
+	r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_FINE_2, 0x00);
+	r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_INCLINATION, 0x00);
+	r |= jbt_reg_write_1(ddata, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
+
+	r |= jbt_reg_write_2(ddata, JBT_REG_HCLOCK_VGA, 0x1f0);
+	r |= jbt_reg_write_1(ddata, JBT_REG_BLANK_CONTROL, 0x02);
+	r |= jbt_reg_write_2(ddata, JBT_REG_BLANK_TH_TV, 0x0804);
+
+	r |= jbt_reg_write_1(ddata, JBT_REG_CKV_ON_OFF, 0x01);
+	r |= jbt_reg_write_2(ddata, JBT_REG_CKV_1_2, 0x0000);
+
+	r |= jbt_reg_write_2(ddata, JBT_REG_OEV_TIMING, 0x0d0e);
+	r |= jbt_reg_write_2(ddata, JBT_REG_ASW_TIMING_1, 0x11a4);
+	r |= jbt_reg_write_1(ddata, JBT_REG_ASW_TIMING_2, 0x0e);
+
+	r |= jbt_ret_write_0(ddata, JBT_REG_DISPLAY_ON);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+transfer_err:
+
+	return r ? -EIO : 0;
+}
+
+static void td028ttec1_panel_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	dev_dbg(dssdev->dev, "td028ttec1_panel_disable()\n");
+
+	jbt_ret_write_0(ddata, JBT_REG_DISPLAY_OFF);
+	jbt_reg_write_2(ddata, JBT_REG_OUTPUT_CONTROL, 0x8002);
+	jbt_ret_write_0(ddata, JBT_REG_SLEEP_IN);
+	jbt_reg_write_1(ddata, JBT_REG_POWER_ON_OFF, 0x00);
+
+	in->ops.dpi->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void td028ttec1_panel_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void td028ttec1_panel_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int td028ttec1_panel_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver td028ttec1_ops = {
+	.connect	= td028ttec1_panel_connect,
+	.disconnect	= td028ttec1_panel_disconnect,
+
+	.enable		= td028ttec1_panel_enable,
+	.disable	= td028ttec1_panel_disable,
+
+	.set_timings	= td028ttec1_panel_set_timings,
+	.get_timings	= td028ttec1_panel_get_timings,
+	.check_timings	= td028ttec1_panel_check_timings,
+};
+
+static int td028ttec1_panel_probe_pdata(struct spi_device *spi)
+{
+	const struct panel_tpo_td028ttec1_platform_data *pdata;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev, *in;
+
+	pdata = dev_get_platdata(&spi->dev);
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&spi->dev, "failed to find video source '%s'\n",
+				pdata->source);
+		return -EPROBE_DEFER;
+	}
+
+	ddata->in = in;
+
+	ddata->data_lines = pdata->data_lines;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int td028ttec1_probe_of(struct spi_device *spi)
+{
+	struct device_node *node = spi->dev.of_node;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *in;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&spi->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int td028ttec1_panel_probe(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	dev_dbg(&spi->dev, "%s\n", __func__);
+
+	spi->bits_per_word = 9;
+	spi->mode = SPI_MODE_3;
+
+	r = spi_setup(spi);
+	if (r < 0) {
+		dev_err(&spi->dev, "spi_setup failed: %d\n", r);
+		return r;
+	}
+
+	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, ddata);
+
+	ddata->spi_dev = spi;
+
+	if (dev_get_platdata(&spi->dev)) {
+		r = td028ttec1_panel_probe_pdata(spi);
+		if (r)
+			return r;
+	} else if (spi->dev.of_node) {
+		r = td028ttec1_probe_of(spi);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	ddata->videomode = td028ttec1_panel_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &spi->dev;
+	dssdev->driver = &td028ttec1_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+	dssdev->phy.dpi.data_lines = ddata->data_lines;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&spi->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int td028ttec1_panel_remove(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(&ddata->spi_dev->dev, "%s\n", __func__);
+
+	omapdss_unregister_display(dssdev);
+
+	td028ttec1_panel_disable(dssdev);
+	td028ttec1_panel_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id td028ttec1_of_match[] = {
+	{ .compatible = "omapdss,toppoly,td028ttec1", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, td028ttec1_of_match);
+
+static struct spi_driver td028ttec1_spi_driver = {
+	.probe		= td028ttec1_panel_probe,
+	.remove		= td028ttec1_panel_remove,
+
+	.driver         = {
+		.name   = "panel-tpo-td028ttec1",
+		.of_match_table = td028ttec1_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+
+module_spi_driver(td028ttec1_spi_driver);
+
+MODULE_ALIAS("spi:toppoly,td028ttec1");
+MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
+MODULE_DESCRIPTION("Toppoly TD028TTEC1 panel driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
new file mode 100644
index 000000000..68e3b68a2
--- /dev/null
+++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c
@@ -0,0 +1,686 @@
+/*
+ * TPO TD043MTEA1 Panel driver
+ *
+ * Author: Gražvydas Ignotas <notasas@gmail.com>
+ * Converted to new DSS device model: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/of_gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+#define TPO_R02_MODE(x)		((x) & 7)
+#define TPO_R02_MODE_800x480	7
+#define TPO_R02_NCLK_RISING	BIT(3)
+#define TPO_R02_HSYNC_HIGH	BIT(4)
+#define TPO_R02_VSYNC_HIGH	BIT(5)
+
+#define TPO_R03_NSTANDBY	BIT(0)
+#define TPO_R03_EN_CP_CLK	BIT(1)
+#define TPO_R03_EN_VGL_PUMP	BIT(2)
+#define TPO_R03_EN_PWM		BIT(3)
+#define TPO_R03_DRIVING_CAP_100	BIT(4)
+#define TPO_R03_EN_PRE_CHARGE	BIT(6)
+#define TPO_R03_SOFTWARE_CTL	BIT(7)
+
+#define TPO_R04_NFLIP_H		BIT(0)
+#define TPO_R04_NFLIP_V		BIT(1)
+#define TPO_R04_CP_CLK_FREQ_1H	BIT(2)
+#define TPO_R04_VGL_FREQ_1H	BIT(4)
+
+#define TPO_R03_VAL_NORMAL (TPO_R03_NSTANDBY | TPO_R03_EN_CP_CLK | \
+			TPO_R03_EN_VGL_PUMP |  TPO_R03_EN_PWM | \
+			TPO_R03_DRIVING_CAP_100 | TPO_R03_EN_PRE_CHARGE | \
+			TPO_R03_SOFTWARE_CTL)
+
+#define TPO_R03_VAL_STANDBY (TPO_R03_DRIVING_CAP_100 | \
+			TPO_R03_EN_PRE_CHARGE | TPO_R03_SOFTWARE_CTL)
+
+static const u16 tpo_td043_def_gamma[12] = {
+	105, 315, 381, 431, 490, 537, 579, 686, 780, 837, 880, 1023
+};
+
+struct panel_drv_data {
+	struct omap_dss_device	dssdev;
+	struct omap_dss_device *in;
+
+	struct omap_video_timings videomode;
+
+	int data_lines;
+
+	struct spi_device *spi;
+	struct regulator *vcc_reg;
+	int nreset_gpio;
+	u16 gamma[12];
+	u32 mode;
+	u32 hmirror:1;
+	u32 vmirror:1;
+	u32 powered_on:1;
+	u32 spi_suspended:1;
+	u32 power_on_resume:1;
+};
+
+static const struct omap_video_timings tpo_td043_timings = {
+	.x_res		= 800,
+	.y_res		= 480,
+
+	.pixelclock	= 36000000,
+
+	.hsw		= 1,
+	.hfp		= 68,
+	.hbp		= 214,
+
+	.vsw		= 1,
+	.vfp		= 39,
+	.vbp		= 34,
+
+	.vsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.hsync_level	= OMAPDSS_SIG_ACTIVE_LOW,
+	.data_pclk_edge	= OMAPDSS_DRIVE_SIG_FALLING_EDGE,
+	.de_level	= OMAPDSS_SIG_ACTIVE_HIGH,
+	.sync_pclk_edge	= OMAPDSS_DRIVE_SIG_RISING_EDGE,
+};
+
+#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
+
+static int tpo_td043_write(struct spi_device *spi, u8 addr, u8 data)
+{
+	struct spi_message	m;
+	struct spi_transfer	xfer;
+	u16			w;
+	int			r;
+
+	spi_message_init(&m);
+
+	memset(&xfer, 0, sizeof(xfer));
+
+	w = ((u16)addr << 10) | (1 << 8) | data;
+	xfer.tx_buf = &w;
+	xfer.bits_per_word = 16;
+	xfer.len = 2;
+	spi_message_add_tail(&xfer, &m);
+
+	r = spi_sync(spi, &m);
+	if (r < 0)
+		dev_warn(&spi->dev, "failed to write to LCD reg (%d)\n", r);
+	return r;
+}
+
+static void tpo_td043_write_gamma(struct spi_device *spi, u16 gamma[12])
+{
+	u8 i, val;
+
+	/* gamma bits [9:8] */
+	for (val = i = 0; i < 4; i++)
+		val |= (gamma[i] & 0x300) >> ((i + 1) * 2);
+	tpo_td043_write(spi, 0x11, val);
+
+	for (val = i = 0; i < 4; i++)
+		val |= (gamma[i+4] & 0x300) >> ((i + 1) * 2);
+	tpo_td043_write(spi, 0x12, val);
+
+	for (val = i = 0; i < 4; i++)
+		val |= (gamma[i+8] & 0x300) >> ((i + 1) * 2);
+	tpo_td043_write(spi, 0x13, val);
+
+	/* gamma bits [7:0] */
+	for (val = i = 0; i < 12; i++)
+		tpo_td043_write(spi, 0x14 + i, gamma[i] & 0xff);
+}
+
+static int tpo_td043_write_mirror(struct spi_device *spi, bool h, bool v)
+{
+	u8 reg4 = TPO_R04_NFLIP_H | TPO_R04_NFLIP_V |
+		TPO_R04_CP_CLK_FREQ_1H | TPO_R04_VGL_FREQ_1H;
+	if (h)
+		reg4 &= ~TPO_R04_NFLIP_H;
+	if (v)
+		reg4 &= ~TPO_R04_NFLIP_V;
+
+	return tpo_td043_write(spi, 4, reg4);
+}
+
+static int tpo_td043_set_hmirror(struct omap_dss_device *dssdev, bool enable)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
+
+	ddata->hmirror = enable;
+	return tpo_td043_write_mirror(ddata->spi, ddata->hmirror,
+			ddata->vmirror);
+}
+
+static bool tpo_td043_get_hmirror(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dssdev->dev);
+
+	return ddata->hmirror;
+}
+
+static ssize_t tpo_td043_vmirror_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", ddata->vmirror);
+}
+
+static ssize_t tpo_td043_vmirror_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	int val;
+	int ret;
+
+	ret = kstrtoint(buf, 0, &val);
+	if (ret < 0)
+		return ret;
+
+	val = !!val;
+
+	ret = tpo_td043_write_mirror(ddata->spi, ddata->hmirror, val);
+	if (ret < 0)
+		return ret;
+
+	ddata->vmirror = val;
+
+	return count;
+}
+
+static ssize_t tpo_td043_mode_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", ddata->mode);
+}
+
+static ssize_t tpo_td043_mode_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	long val;
+	int ret;
+
+	ret = kstrtol(buf, 0, &val);
+	if (ret != 0 || val & ~7)
+		return -EINVAL;
+
+	ddata->mode = val;
+
+	val |= TPO_R02_NCLK_RISING;
+	tpo_td043_write(ddata->spi, 2, val);
+
+	return count;
+}
+
+static ssize_t tpo_td043_gamma_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	ssize_t len = 0;
+	int ret;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ddata->gamma); i++) {
+		ret = snprintf(buf + len, PAGE_SIZE - len, "%u ",
+				ddata->gamma[i]);
+		if (ret < 0)
+			return ret;
+		len += ret;
+	}
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static ssize_t tpo_td043_gamma_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	unsigned int g[12];
+	int ret;
+	int i;
+
+	ret = sscanf(buf, "%u %u %u %u %u %u %u %u %u %u %u %u",
+			&g[0], &g[1], &g[2], &g[3], &g[4], &g[5],
+			&g[6], &g[7], &g[8], &g[9], &g[10], &g[11]);
+
+	if (ret != 12)
+		return -EINVAL;
+
+	for (i = 0; i < 12; i++)
+		ddata->gamma[i] = g[i];
+
+	tpo_td043_write_gamma(ddata->spi, ddata->gamma);
+
+	return count;
+}
+
+static DEVICE_ATTR(vmirror, S_IRUGO | S_IWUSR,
+		tpo_td043_vmirror_show, tpo_td043_vmirror_store);
+static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR,
+		tpo_td043_mode_show, tpo_td043_mode_store);
+static DEVICE_ATTR(gamma, S_IRUGO | S_IWUSR,
+		tpo_td043_gamma_show, tpo_td043_gamma_store);
+
+static struct attribute *tpo_td043_attrs[] = {
+	&dev_attr_vmirror.attr,
+	&dev_attr_mode.attr,
+	&dev_attr_gamma.attr,
+	NULL,
+};
+
+static struct attribute_group tpo_td043_attr_group = {
+	.attrs = tpo_td043_attrs,
+};
+
+static int tpo_td043_power_on(struct panel_drv_data *ddata)
+{
+	int r;
+
+	if (ddata->powered_on)
+		return 0;
+
+	r = regulator_enable(ddata->vcc_reg);
+	if (r != 0)
+		return r;
+
+	/* wait for panel to stabilize */
+	msleep(160);
+
+	if (gpio_is_valid(ddata->nreset_gpio))
+		gpio_set_value(ddata->nreset_gpio, 1);
+
+	tpo_td043_write(ddata->spi, 2,
+			TPO_R02_MODE(ddata->mode) | TPO_R02_NCLK_RISING);
+	tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_NORMAL);
+	tpo_td043_write(ddata->spi, 0x20, 0xf0);
+	tpo_td043_write(ddata->spi, 0x21, 0xf0);
+	tpo_td043_write_mirror(ddata->spi, ddata->hmirror,
+			ddata->vmirror);
+	tpo_td043_write_gamma(ddata->spi, ddata->gamma);
+
+	ddata->powered_on = 1;
+	return 0;
+}
+
+static void tpo_td043_power_off(struct panel_drv_data *ddata)
+{
+	if (!ddata->powered_on)
+		return;
+
+	tpo_td043_write(ddata->spi, 3,
+			TPO_R03_VAL_STANDBY | TPO_R03_EN_PWM);
+
+	if (gpio_is_valid(ddata->nreset_gpio))
+		gpio_set_value(ddata->nreset_gpio, 0);
+
+	/* wait for at least 2 vsyncs before cutting off power */
+	msleep(50);
+
+	tpo_td043_write(ddata->spi, 3, TPO_R03_VAL_STANDBY);
+
+	regulator_disable(ddata->vcc_reg);
+
+	ddata->powered_on = 0;
+}
+
+static int tpo_td043_connect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (omapdss_device_is_connected(dssdev))
+		return 0;
+
+	r = in->ops.dpi->connect(in, dssdev);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+static void tpo_td043_disconnect(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	in->ops.dpi->disconnect(in, dssdev);
+}
+
+static int tpo_td043_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	if (ddata->data_lines)
+		in->ops.dpi->set_data_lines(in, ddata->data_lines);
+	in->ops.dpi->set_timings(in, &ddata->videomode);
+
+	r = in->ops.dpi->enable(in);
+	if (r)
+		return r;
+
+	/*
+	 * If we are resuming from system suspend, SPI clocks might not be
+	 * enabled yet, so we'll program the LCD from SPI PM resume callback.
+	 */
+	if (!ddata->spi_suspended) {
+		r = tpo_td043_power_on(ddata);
+		if (r) {
+			in->ops.dpi->disable(in);
+			return r;
+		}
+	}
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void tpo_td043_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	in->ops.dpi->disable(in);
+
+	if (!ddata->spi_suspended)
+		tpo_td043_power_off(ddata);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void tpo_td043_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	ddata->videomode = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.dpi->set_timings(in, timings);
+}
+
+static void tpo_td043_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	*timings = ddata->videomode;
+}
+
+static int tpo_td043_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	return in->ops.dpi->check_timings(in, timings);
+}
+
+static struct omap_dss_driver tpo_td043_ops = {
+	.connect	= tpo_td043_connect,
+	.disconnect	= tpo_td043_disconnect,
+
+	.enable		= tpo_td043_enable,
+	.disable	= tpo_td043_disable,
+
+	.set_timings	= tpo_td043_set_timings,
+	.get_timings	= tpo_td043_get_timings,
+	.check_timings	= tpo_td043_check_timings,
+
+	.set_mirror	= tpo_td043_set_hmirror,
+	.get_mirror	= tpo_td043_get_hmirror,
+
+	.get_resolution	= omapdss_default_get_resolution,
+};
+
+
+static int tpo_td043_probe_pdata(struct spi_device *spi)
+{
+	const struct panel_tpo_td043mtea1_platform_data *pdata;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev, *in;
+
+	pdata = dev_get_platdata(&spi->dev);
+
+	ddata->nreset_gpio = pdata->nreset_gpio;
+
+	in = omap_dss_find_output(pdata->source);
+	if (in == NULL) {
+		dev_err(&spi->dev, "failed to find video source '%s'\n",
+				pdata->source);
+		return -EPROBE_DEFER;
+	}
+	ddata->in = in;
+
+	ddata->data_lines = pdata->data_lines;
+
+	dssdev = &ddata->dssdev;
+	dssdev->name = pdata->name;
+
+	return 0;
+}
+
+static int tpo_td043_probe_of(struct spi_device *spi)
+{
+	struct device_node *node = spi->dev.of_node;
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *in;
+	int gpio;
+
+	gpio = of_get_named_gpio(node, "reset-gpios", 0);
+	if (!gpio_is_valid(gpio)) {
+		dev_err(&spi->dev, "failed to parse enable gpio\n");
+		return gpio;
+	}
+	ddata->nreset_gpio = gpio;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&spi->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	return 0;
+}
+
+static int tpo_td043_probe(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev;
+	int r;
+
+	dev_dbg(&spi->dev, "%s\n", __func__);
+
+	spi->bits_per_word = 16;
+	spi->mode = SPI_MODE_0;
+
+	r = spi_setup(spi);
+	if (r < 0) {
+		dev_err(&spi->dev, "spi_setup failed: %d\n", r);
+		return r;
+	}
+
+	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
+	if (ddata == NULL)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, ddata);
+
+	ddata->spi = spi;
+
+	if (dev_get_platdata(&spi->dev)) {
+		r = tpo_td043_probe_pdata(spi);
+		if (r)
+			return r;
+	} else if (spi->dev.of_node) {
+		r = tpo_td043_probe_of(spi);
+		if (r)
+			return r;
+	} else {
+		return -ENODEV;
+	}
+
+	ddata->mode = TPO_R02_MODE_800x480;
+	memcpy(ddata->gamma, tpo_td043_def_gamma, sizeof(ddata->gamma));
+
+	ddata->vcc_reg = devm_regulator_get(&spi->dev, "vcc");
+	if (IS_ERR(ddata->vcc_reg)) {
+		dev_err(&spi->dev, "failed to get LCD VCC regulator\n");
+		r = PTR_ERR(ddata->vcc_reg);
+		goto err_regulator;
+	}
+
+	if (gpio_is_valid(ddata->nreset_gpio)) {
+		r = devm_gpio_request_one(&spi->dev,
+				ddata->nreset_gpio, GPIOF_OUT_INIT_LOW,
+				"lcd reset");
+		if (r < 0) {
+			dev_err(&spi->dev, "couldn't request reset GPIO\n");
+			goto err_gpio_req;
+		}
+	}
+
+	r = sysfs_create_group(&spi->dev.kobj, &tpo_td043_attr_group);
+	if (r) {
+		dev_err(&spi->dev, "failed to create sysfs files\n");
+		goto err_sysfs;
+	}
+
+	ddata->videomode = tpo_td043_timings;
+
+	dssdev = &ddata->dssdev;
+	dssdev->dev = &spi->dev;
+	dssdev->driver = &tpo_td043_ops;
+	dssdev->type = OMAP_DISPLAY_TYPE_DPI;
+	dssdev->owner = THIS_MODULE;
+	dssdev->panel.timings = ddata->videomode;
+
+	r = omapdss_register_display(dssdev);
+	if (r) {
+		dev_err(&spi->dev, "Failed to register panel\n");
+		goto err_reg;
+	}
+
+	return 0;
+
+err_reg:
+	sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
+err_sysfs:
+err_gpio_req:
+err_regulator:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int tpo_td043_remove(struct spi_device *spi)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(&ddata->spi->dev, "%s\n", __func__);
+
+	omapdss_unregister_display(dssdev);
+
+	tpo_td043_disable(dssdev);
+	tpo_td043_disconnect(dssdev);
+
+	omap_dss_put_device(in);
+
+	sysfs_remove_group(&spi->dev.kobj, &tpo_td043_attr_group);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tpo_td043_spi_suspend(struct device *dev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "tpo_td043_spi_suspend, tpo %p\n", ddata);
+
+	ddata->power_on_resume = ddata->powered_on;
+	tpo_td043_power_off(ddata);
+	ddata->spi_suspended = 1;
+
+	return 0;
+}
+
+static int tpo_td043_spi_resume(struct device *dev)
+{
+	struct panel_drv_data *ddata = dev_get_drvdata(dev);
+	int ret;
+
+	dev_dbg(dev, "tpo_td043_spi_resume\n");
+
+	if (ddata->power_on_resume) {
+		ret = tpo_td043_power_on(ddata);
+		if (ret)
+			return ret;
+	}
+	ddata->spi_suspended = 0;
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(tpo_td043_spi_pm,
+	tpo_td043_spi_suspend, tpo_td043_spi_resume);
+
+static const struct of_device_id tpo_td043_of_match[] = {
+	{ .compatible = "omapdss,tpo,td043mtea1", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, tpo_td043_of_match);
+
+static struct spi_driver tpo_td043_spi_driver = {
+	.driver = {
+		.name	= "panel-tpo-td043mtea1",
+		.pm	= &tpo_td043_spi_pm,
+		.of_match_table = tpo_td043_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe	= tpo_td043_probe,
+	.remove	= tpo_td043_remove,
+};
+
+module_spi_driver(tpo_td043_spi_driver);
+
+MODULE_ALIAS("spi:tpo,td043mtea1");
+MODULE_AUTHOR("Gražvydas Ignotas <notasas@gmail.com>");
+MODULE_DESCRIPTION("TPO TD043MTEA1 LCD Driver");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-54-g00ecf