From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001
From: André Fabian Silva Delgado <emulatorman@parabola.nu>
Date: Wed, 5 Aug 2015 17:04:01 -0300
Subject: Initial import

---
 drivers/video/fbdev/w100fb.c | 1637 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 1637 insertions(+)
 create mode 100644 drivers/video/fbdev/w100fb.c

(limited to 'drivers/video/fbdev/w100fb.c')

diff --git a/drivers/video/fbdev/w100fb.c b/drivers/video/fbdev/w100fb.c
new file mode 100644
index 000000000..10951c82f
--- /dev/null
+++ b/drivers/video/fbdev/w100fb.c
@@ -0,0 +1,1637 @@
+/*
+ * linux/drivers/video/w100fb.c
+ *
+ * Frame Buffer Device for ATI Imageon w100 (Wallaby)
+ *
+ * Copyright (C) 2002, ATI Corp.
+ * Copyright (C) 2004-2006 Richard Purdie
+ * Copyright (c) 2005 Ian Molton
+ * Copyright (c) 2006 Alberto Mardegan
+ *
+ * Rewritten for 2.6 by Richard Purdie <rpurdie@rpsys.net>
+ *
+ * Generic platform support by Ian Molton <spyro@f2s.com>
+ * and Richard Purdie <rpurdie@rpsys.net>
+ *
+ * w32xx support by Ian Molton
+ *
+ * Hardware acceleration support by Alberto Mardegan
+ * <mardy@users.sourceforge.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/vmalloc.h>
+#include <linux/module.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <video/w100fb.h>
+#include "w100fb.h"
+
+/*
+ * Prototypes
+ */
+static void w100_suspend(u32 mode);
+static void w100_vsync(void);
+static void w100_hw_init(struct w100fb_par*);
+static void w100_pwm_setup(struct w100fb_par*);
+static void w100_init_clocks(struct w100fb_par*);
+static void w100_setup_memory(struct w100fb_par*);
+static void w100_init_lcd(struct w100fb_par*);
+static void w100_set_dispregs(struct w100fb_par*);
+static void w100_update_enable(void);
+static void w100_update_disable(void);
+static void calc_hsync(struct w100fb_par *par);
+static void w100_init_graphic_engine(struct w100fb_par *par);
+struct w100_pll_info *w100_get_xtal_table(unsigned int freq);
+
+/* Pseudo palette size */
+#define MAX_PALETTES      16
+
+#define W100_SUSPEND_EXTMEM 0
+#define W100_SUSPEND_ALL    1
+
+#define BITS_PER_PIXEL    16
+
+/* Remapped addresses for base cfg, memmapped regs and the frame buffer itself */
+static void *remapped_base;
+static void *remapped_regs;
+static void *remapped_fbuf;
+
+#define REMAPPED_FB_LEN   0x15ffff
+
+/* This is the offset in the w100's address space we map the current
+   framebuffer memory to. We use the position of external memory as
+   we can remap internal memory to there if external isn't present. */
+#define W100_FB_BASE MEM_EXT_BASE_VALUE
+
+
+/*
+ * Sysfs functions
+ */
+static ssize_t flip_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct w100fb_par *par=info->par;
+
+	return sprintf(buf, "%d\n",par->flip);
+}
+
+static ssize_t flip_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	unsigned int flip;
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct w100fb_par *par=info->par;
+
+	flip = simple_strtoul(buf, NULL, 10);
+
+	if (flip > 0)
+		par->flip = 1;
+	else
+		par->flip = 0;
+
+	w100_update_disable();
+	w100_set_dispregs(par);
+	w100_update_enable();
+
+	calc_hsync(par);
+
+	return count;
+}
+
+static DEVICE_ATTR(flip, 0644, flip_show, flip_store);
+
+static ssize_t w100fb_reg_read(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	unsigned long regs, param;
+	regs = simple_strtoul(buf, NULL, 16);
+	param = readl(remapped_regs + regs);
+	printk("Read Register 0x%08lX: 0x%08lX\n", regs, param);
+	return count;
+}
+
+static DEVICE_ATTR(reg_read, 0200, NULL, w100fb_reg_read);
+
+static ssize_t w100fb_reg_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	unsigned long regs, param;
+	sscanf(buf, "%lx %lx", &regs, &param);
+
+	if (regs <= 0x2000) {
+		printk("Write Register 0x%08lX: 0x%08lX\n", regs, param);
+		writel(param, remapped_regs + regs);
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(reg_write, 0200, NULL, w100fb_reg_write);
+
+
+static ssize_t fastpllclk_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct w100fb_par *par=info->par;
+
+	return sprintf(buf, "%d\n",par->fastpll_mode);
+}
+
+static ssize_t fastpllclk_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct w100fb_par *par=info->par;
+
+	if (simple_strtoul(buf, NULL, 10) > 0) {
+		par->fastpll_mode=1;
+		printk("w100fb: Using fast system clock (if possible)\n");
+	} else {
+		par->fastpll_mode=0;
+		printk("w100fb: Using normal system clock\n");
+	}
+
+	w100_init_clocks(par);
+	calc_hsync(par);
+
+	return count;
+}
+
+static DEVICE_ATTR(fastpllclk, 0644, fastpllclk_show, fastpllclk_store);
+
+/*
+ * Some touchscreens need hsync information from the video driver to
+ * function correctly. We export it here.
+ */
+unsigned long w100fb_get_hsynclen(struct device *dev)
+{
+	struct fb_info *info = dev_get_drvdata(dev);
+	struct w100fb_par *par=info->par;
+
+	/* If display is blanked/suspended, hsync isn't active */
+	if (par->blanked)
+		return 0;
+	else
+		return par->hsync_len;
+}
+EXPORT_SYMBOL(w100fb_get_hsynclen);
+
+static void w100fb_clear_screen(struct w100fb_par *par)
+{
+	memset_io(remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), 0, (par->xres * par->yres * BITS_PER_PIXEL/8));
+}
+
+
+/*
+ * Set a palette value from rgb components
+ */
+static int w100fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+			     u_int trans, struct fb_info *info)
+{
+	unsigned int val;
+	int ret = 1;
+
+	/*
+	 * If greyscale is true, then we convert the RGB value
+	 * to greyscale no matter what visual we are using.
+	 */
+	if (info->var.grayscale)
+		red = green = blue = (19595 * red + 38470 * green + 7471 * blue) >> 16;
+
+	/*
+	 * 16-bit True Colour.  We encode the RGB value
+	 * according to the RGB bitfield information.
+	 */
+	if (regno < MAX_PALETTES) {
+		u32 *pal = info->pseudo_palette;
+
+		val = (red & 0xf800) | ((green & 0xfc00) >> 5) | ((blue & 0xf800) >> 11);
+		pal[regno] = val;
+		ret = 0;
+	}
+	return ret;
+}
+
+
+/*
+ * Blank the display based on value in blank_mode
+ */
+static int w100fb_blank(int blank_mode, struct fb_info *info)
+{
+	struct w100fb_par *par = info->par;
+	struct w100_tg_info *tg = par->mach->tg;
+
+	switch(blank_mode) {
+
+ 	case FB_BLANK_NORMAL:         /* Normal blanking */
+	case FB_BLANK_VSYNC_SUSPEND:  /* VESA blank (vsync off) */
+	case FB_BLANK_HSYNC_SUSPEND:  /* VESA blank (hsync off) */
+ 	case FB_BLANK_POWERDOWN:      /* Poweroff */
+  		if (par->blanked == 0) {
+			if(tg && tg->suspend)
+				tg->suspend(par);
+			par->blanked = 1;
+  		}
+  		break;
+
+ 	case FB_BLANK_UNBLANK: /* Unblanking */
+  		if (par->blanked != 0) {
+			if(tg && tg->resume)
+				tg->resume(par);
+			par->blanked = 0;
+  		}
+  		break;
+ 	}
+	return 0;
+}
+
+
+static void w100_fifo_wait(int entries)
+{
+	union rbbm_status_u status;
+	int i;
+
+	for (i = 0; i < 2000000; i++) {
+		status.val = readl(remapped_regs + mmRBBM_STATUS);
+		if (status.f.cmdfifo_avail >= entries)
+			return;
+		udelay(1);
+	}
+	printk(KERN_ERR "w100fb: FIFO Timeout!\n");
+}
+
+
+static int w100fb_sync(struct fb_info *info)
+{
+	union rbbm_status_u status;
+	int i;
+
+	for (i = 0; i < 2000000; i++) {
+		status.val = readl(remapped_regs + mmRBBM_STATUS);
+		if (!status.f.gui_active)
+			return 0;
+		udelay(1);
+	}
+	printk(KERN_ERR "w100fb: Graphic engine timeout!\n");
+	return -EBUSY;
+}
+
+
+static void w100_init_graphic_engine(struct w100fb_par *par)
+{
+	union dp_gui_master_cntl_u gmc;
+	union dp_mix_u dp_mix;
+	union dp_datatype_u dp_datatype;
+	union dp_cntl_u dp_cntl;
+
+	w100_fifo_wait(4);
+	writel(W100_FB_BASE, remapped_regs + mmDST_OFFSET);
+	writel(par->xres, remapped_regs + mmDST_PITCH);
+	writel(W100_FB_BASE, remapped_regs + mmSRC_OFFSET);
+	writel(par->xres, remapped_regs + mmSRC_PITCH);
+
+	w100_fifo_wait(3);
+	writel(0, remapped_regs + mmSC_TOP_LEFT);
+	writel((par->yres << 16) | par->xres, remapped_regs + mmSC_BOTTOM_RIGHT);
+	writel(0x1fff1fff, remapped_regs + mmSRC_SC_BOTTOM_RIGHT);
+
+	w100_fifo_wait(4);
+	dp_cntl.val = 0;
+	dp_cntl.f.dst_x_dir = 1;
+	dp_cntl.f.dst_y_dir = 1;
+	dp_cntl.f.src_x_dir = 1;
+	dp_cntl.f.src_y_dir = 1;
+	dp_cntl.f.dst_major_x = 1;
+	dp_cntl.f.src_major_x = 1;
+	writel(dp_cntl.val, remapped_regs + mmDP_CNTL);
+
+	gmc.val = 0;
+	gmc.f.gmc_src_pitch_offset_cntl = 1;
+	gmc.f.gmc_dst_pitch_offset_cntl = 1;
+	gmc.f.gmc_src_clipping = 1;
+	gmc.f.gmc_dst_clipping = 1;
+	gmc.f.gmc_brush_datatype = GMC_BRUSH_NONE;
+	gmc.f.gmc_dst_datatype = 3; /* from DstType_16Bpp_444 */
+	gmc.f.gmc_src_datatype = SRC_DATATYPE_EQU_DST;
+	gmc.f.gmc_byte_pix_order = 1;
+	gmc.f.gmc_default_sel = 0;
+	gmc.f.gmc_rop3 = ROP3_SRCCOPY;
+	gmc.f.gmc_dp_src_source = DP_SRC_MEM_RECTANGULAR;
+	gmc.f.gmc_clr_cmp_fcn_dis = 1;
+	gmc.f.gmc_wr_msk_dis = 1;
+	gmc.f.gmc_dp_op = DP_OP_ROP;
+	writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL);
+
+	dp_datatype.val = dp_mix.val = 0;
+	dp_datatype.f.dp_dst_datatype = gmc.f.gmc_dst_datatype;
+	dp_datatype.f.dp_brush_datatype = gmc.f.gmc_brush_datatype;
+	dp_datatype.f.dp_src2_type = 0;
+	dp_datatype.f.dp_src2_datatype = gmc.f.gmc_src_datatype;
+	dp_datatype.f.dp_src_datatype = gmc.f.gmc_src_datatype;
+	dp_datatype.f.dp_byte_pix_order = gmc.f.gmc_byte_pix_order;
+	writel(dp_datatype.val, remapped_regs + mmDP_DATATYPE);
+
+	dp_mix.f.dp_src_source = gmc.f.gmc_dp_src_source;
+	dp_mix.f.dp_src2_source = 1;
+	dp_mix.f.dp_rop3 = gmc.f.gmc_rop3;
+	dp_mix.f.dp_op = gmc.f.gmc_dp_op;
+	writel(dp_mix.val, remapped_regs + mmDP_MIX);
+}
+
+
+static void w100fb_fillrect(struct fb_info *info,
+                            const struct fb_fillrect *rect)
+{
+	union dp_gui_master_cntl_u gmc;
+
+	if (info->state != FBINFO_STATE_RUNNING)
+		return;
+	if (info->flags & FBINFO_HWACCEL_DISABLED) {
+		cfb_fillrect(info, rect);
+		return;
+	}
+
+	gmc.val = readl(remapped_regs + mmDP_GUI_MASTER_CNTL);
+	gmc.f.gmc_rop3 = ROP3_PATCOPY;
+	gmc.f.gmc_brush_datatype = GMC_BRUSH_SOLID_COLOR;
+	w100_fifo_wait(2);
+	writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL);
+	writel(rect->color, remapped_regs + mmDP_BRUSH_FRGD_CLR);
+
+	w100_fifo_wait(2);
+	writel((rect->dy << 16) | (rect->dx & 0xffff), remapped_regs + mmDST_Y_X);
+	writel((rect->width << 16) | (rect->height & 0xffff),
+	       remapped_regs + mmDST_WIDTH_HEIGHT);
+}
+
+
+static void w100fb_copyarea(struct fb_info *info,
+                            const struct fb_copyarea *area)
+{
+	u32 dx = area->dx, dy = area->dy, sx = area->sx, sy = area->sy;
+	u32 h = area->height, w = area->width;
+	union dp_gui_master_cntl_u gmc;
+
+	if (info->state != FBINFO_STATE_RUNNING)
+		return;
+	if (info->flags & FBINFO_HWACCEL_DISABLED) {
+		cfb_copyarea(info, area);
+		return;
+	}
+
+	gmc.val = readl(remapped_regs + mmDP_GUI_MASTER_CNTL);
+	gmc.f.gmc_rop3 = ROP3_SRCCOPY;
+	gmc.f.gmc_brush_datatype = GMC_BRUSH_NONE;
+	w100_fifo_wait(1);
+	writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL);
+
+	w100_fifo_wait(3);
+	writel((sy << 16) | (sx & 0xffff), remapped_regs + mmSRC_Y_X);
+	writel((dy << 16) | (dx & 0xffff), remapped_regs + mmDST_Y_X);
+	writel((w << 16) | (h & 0xffff), remapped_regs + mmDST_WIDTH_HEIGHT);
+}
+
+
+/*
+ *  Change the resolution by calling the appropriate hardware functions
+ */
+static void w100fb_activate_var(struct w100fb_par *par)
+{
+	struct w100_tg_info *tg = par->mach->tg;
+
+	w100_pwm_setup(par);
+	w100_setup_memory(par);
+	w100_init_clocks(par);
+	w100fb_clear_screen(par);
+	w100_vsync();
+
+	w100_update_disable();
+	w100_init_lcd(par);
+	w100_set_dispregs(par);
+	w100_update_enable();
+	w100_init_graphic_engine(par);
+
+	calc_hsync(par);
+
+	if (!par->blanked && tg && tg->change)
+		tg->change(par);
+}
+
+
+/* Select the smallest mode that allows the desired resolution to be
+ * displayed. If desired, the x and y parameters can be rounded up to
+ * match the selected mode.
+ */
+static struct w100_mode *w100fb_get_mode(struct w100fb_par *par, unsigned int *x, unsigned int *y, int saveval)
+{
+	struct w100_mode *mode = NULL;
+	struct w100_mode *modelist = par->mach->modelist;
+	unsigned int best_x = 0xffffffff, best_y = 0xffffffff;
+	unsigned int i;
+
+	for (i = 0 ; i < par->mach->num_modes ; i++) {
+		if (modelist[i].xres >= *x && modelist[i].yres >= *y &&
+				modelist[i].xres < best_x && modelist[i].yres < best_y) {
+			best_x = modelist[i].xres;
+			best_y = modelist[i].yres;
+			mode = &modelist[i];
+		} else if(modelist[i].xres >= *y && modelist[i].yres >= *x &&
+		        modelist[i].xres < best_y && modelist[i].yres < best_x) {
+			best_x = modelist[i].yres;
+			best_y = modelist[i].xres;
+			mode = &modelist[i];
+		}
+	}
+
+	if (mode && saveval) {
+		*x = best_x;
+		*y = best_y;
+	}
+
+	return mode;
+}
+
+
+/*
+ *  w100fb_check_var():
+ *  Get the video params out of 'var'. If a value doesn't fit, round it up,
+ *  if it's too big, return -EINVAL.
+ */
+static int w100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	struct w100fb_par *par=info->par;
+
+	if(!w100fb_get_mode(par, &var->xres, &var->yres, 1))
+		return -EINVAL;
+
+	if (par->mach->mem && ((var->xres*var->yres*BITS_PER_PIXEL/8) > (par->mach->mem->size+1)))
+		return -EINVAL;
+
+	if (!par->mach->mem && ((var->xres*var->yres*BITS_PER_PIXEL/8) > (MEM_INT_SIZE+1)))
+		return -EINVAL;
+
+	var->xres_virtual = max(var->xres_virtual, var->xres);
+	var->yres_virtual = max(var->yres_virtual, var->yres);
+
+	if (var->bits_per_pixel > BITS_PER_PIXEL)
+		return -EINVAL;
+	else
+		var->bits_per_pixel = BITS_PER_PIXEL;
+
+	var->red.offset = 11;
+	var->red.length = 5;
+	var->green.offset = 5;
+	var->green.length = 6;
+	var->blue.offset = 0;
+	var->blue.length = 5;
+	var->transp.offset = var->transp.length = 0;
+
+	var->nonstd = 0;
+	var->height = -1;
+	var->width = -1;
+	var->vmode = FB_VMODE_NONINTERLACED;
+	var->sync = 0;
+	var->pixclock = 0x04;  /* 171521; */
+
+	return 0;
+}
+
+
+/*
+ * w100fb_set_par():
+ *	Set the user defined part of the display for the specified console
+ *  by looking at the values in info.var
+ */
+static int w100fb_set_par(struct fb_info *info)
+{
+	struct w100fb_par *par=info->par;
+
+	if (par->xres != info->var.xres || par->yres != info->var.yres)	{
+		par->xres = info->var.xres;
+		par->yres = info->var.yres;
+		par->mode = w100fb_get_mode(par, &par->xres, &par->yres, 0);
+
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		info->fix.ypanstep = 0;
+		info->fix.ywrapstep = 0;
+		info->fix.line_length = par->xres * BITS_PER_PIXEL / 8;
+
+		mutex_lock(&info->mm_lock);
+		if ((par->xres*par->yres*BITS_PER_PIXEL/8) > (MEM_INT_SIZE+1)) {
+			par->extmem_active = 1;
+			info->fix.smem_len = par->mach->mem->size+1;
+		} else {
+			par->extmem_active = 0;
+			info->fix.smem_len = MEM_INT_SIZE+1;
+		}
+		mutex_unlock(&info->mm_lock);
+
+		w100fb_activate_var(par);
+	}
+	return 0;
+}
+
+
+/*
+ *  Frame buffer operations
+ */
+static struct fb_ops w100fb_ops = {
+	.owner        = THIS_MODULE,
+	.fb_check_var = w100fb_check_var,
+	.fb_set_par   = w100fb_set_par,
+	.fb_setcolreg = w100fb_setcolreg,
+	.fb_blank     = w100fb_blank,
+	.fb_fillrect  = w100fb_fillrect,
+	.fb_copyarea  = w100fb_copyarea,
+	.fb_imageblit = cfb_imageblit,
+	.fb_sync      = w100fb_sync,
+};
+
+#ifdef CONFIG_PM
+static void w100fb_save_vidmem(struct w100fb_par *par)
+{
+	int memsize;
+
+	if (par->extmem_active) {
+		memsize=par->mach->mem->size;
+		par->saved_extmem = vmalloc(memsize);
+		if (par->saved_extmem)
+			memcpy_fromio(par->saved_extmem, remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), memsize);
+	}
+	memsize=MEM_INT_SIZE;
+	par->saved_intmem = vmalloc(memsize);
+	if (par->saved_intmem && par->extmem_active)
+		memcpy_fromio(par->saved_intmem, remapped_fbuf + (W100_FB_BASE-MEM_INT_BASE_VALUE), memsize);
+	else if (par->saved_intmem)
+		memcpy_fromio(par->saved_intmem, remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), memsize);
+}
+
+static void w100fb_restore_vidmem(struct w100fb_par *par)
+{
+	int memsize;
+
+	if (par->extmem_active && par->saved_extmem) {
+		memsize=par->mach->mem->size;
+		memcpy_toio(remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), par->saved_extmem, memsize);
+		vfree(par->saved_extmem);
+	}
+	if (par->saved_intmem) {
+		memsize=MEM_INT_SIZE;
+		if (par->extmem_active)
+			memcpy_toio(remapped_fbuf + (W100_FB_BASE-MEM_INT_BASE_VALUE), par->saved_intmem, memsize);
+		else
+			memcpy_toio(remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), par->saved_intmem, memsize);
+		vfree(par->saved_intmem);
+	}
+}
+
+static int w100fb_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct fb_info *info = platform_get_drvdata(dev);
+	struct w100fb_par *par=info->par;
+	struct w100_tg_info *tg = par->mach->tg;
+
+	w100fb_save_vidmem(par);
+	if(tg && tg->suspend)
+		tg->suspend(par);
+	w100_suspend(W100_SUSPEND_ALL);
+	par->blanked = 1;
+
+	return 0;
+}
+
+static int w100fb_resume(struct platform_device *dev)
+{
+	struct fb_info *info = platform_get_drvdata(dev);
+	struct w100fb_par *par=info->par;
+	struct w100_tg_info *tg = par->mach->tg;
+
+	w100_hw_init(par);
+	w100fb_activate_var(par);
+	w100fb_restore_vidmem(par);
+	if(tg && tg->resume)
+		tg->resume(par);
+	par->blanked = 0;
+
+	return 0;
+}
+#else
+#define w100fb_suspend  NULL
+#define w100fb_resume   NULL
+#endif
+
+
+int w100fb_probe(struct platform_device *pdev)
+{
+	int err = -EIO;
+	struct w100fb_mach_info *inf;
+	struct fb_info *info = NULL;
+	struct w100fb_par *par;
+	struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	unsigned int chip_id;
+
+	if (!mem)
+		return -EINVAL;
+
+	/* Remap the chip base address */
+	remapped_base = ioremap_nocache(mem->start+W100_CFG_BASE, W100_CFG_LEN);
+	if (remapped_base == NULL)
+		goto out;
+
+	/* Map the register space */
+	remapped_regs = ioremap_nocache(mem->start+W100_REG_BASE, W100_REG_LEN);
+	if (remapped_regs == NULL)
+		goto out;
+
+	/* Identify the chip */
+	printk("Found ");
+	chip_id = readl(remapped_regs + mmCHIP_ID);
+	switch(chip_id) {
+		case CHIP_ID_W100:  printk("w100");  break;
+		case CHIP_ID_W3200: printk("w3200"); break;
+		case CHIP_ID_W3220: printk("w3220"); break;
+		default:
+			printk("Unknown imageon chip ID\n");
+			err = -ENODEV;
+			goto out;
+	}
+	printk(" at 0x%08lx.\n", (unsigned long) mem->start+W100_CFG_BASE);
+
+	/* Remap the framebuffer */
+	remapped_fbuf = ioremap_nocache(mem->start+MEM_WINDOW_BASE, MEM_WINDOW_SIZE);
+	if (remapped_fbuf == NULL)
+		goto out;
+
+	info=framebuffer_alloc(sizeof(struct w100fb_par), &pdev->dev);
+	if (!info) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	par = info->par;
+	platform_set_drvdata(pdev, info);
+
+	inf = dev_get_platdata(&pdev->dev);
+	par->chip_id = chip_id;
+	par->mach = inf;
+	par->fastpll_mode = 0;
+	par->blanked = 0;
+
+	par->pll_table=w100_get_xtal_table(inf->xtal_freq);
+	if (!par->pll_table) {
+		printk(KERN_ERR "No matching Xtal definition found\n");
+		err = -EINVAL;
+		goto out;
+	}
+
+	info->pseudo_palette = kmalloc(sizeof (u32) * MAX_PALETTES, GFP_KERNEL);
+	if (!info->pseudo_palette) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	info->fbops = &w100fb_ops;
+	info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA |
+		FBINFO_HWACCEL_FILLRECT;
+	info->node = -1;
+	info->screen_base = remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE);
+	info->screen_size = REMAPPED_FB_LEN;
+
+	strcpy(info->fix.id, "w100fb");
+	info->fix.type = FB_TYPE_PACKED_PIXELS;
+	info->fix.type_aux = 0;
+	info->fix.accel = FB_ACCEL_NONE;
+	info->fix.smem_start = mem->start+W100_FB_BASE;
+	info->fix.mmio_start = mem->start+W100_REG_BASE;
+	info->fix.mmio_len = W100_REG_LEN;
+
+	if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	par->mode = &inf->modelist[0];
+	if(inf->init_mode & INIT_MODE_ROTATED) {
+		info->var.xres = par->mode->yres;
+		info->var.yres = par->mode->xres;
+	}
+	else {
+		info->var.xres = par->mode->xres;
+		info->var.yres = par->mode->yres;
+	}
+
+	if(inf->init_mode &= INIT_MODE_FLIPPED)
+		par->flip = 1;
+	else
+		par->flip = 0;
+
+	info->var.xres_virtual = info->var.xres;
+	info->var.yres_virtual = info->var.yres;
+	info->var.pixclock = 0x04;  /* 171521; */
+	info->var.sync = 0;
+	info->var.grayscale = 0;
+	info->var.xoffset = info->var.yoffset = 0;
+	info->var.accel_flags = 0;
+	info->var.activate = FB_ACTIVATE_NOW;
+
+	w100_hw_init(par);
+
+	if (w100fb_check_var(&info->var, info) < 0) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	if (register_framebuffer(info) < 0) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	err = device_create_file(&pdev->dev, &dev_attr_fastpllclk);
+	err |= device_create_file(&pdev->dev, &dev_attr_reg_read);
+	err |= device_create_file(&pdev->dev, &dev_attr_reg_write);
+	err |= device_create_file(&pdev->dev, &dev_attr_flip);
+
+	if (err != 0)
+		fb_warn(info, "failed to register attributes (%d)\n", err);
+
+	fb_info(info, "%s frame buffer device\n", info->fix.id);
+	return 0;
+out:
+	if (info) {
+		fb_dealloc_cmap(&info->cmap);
+		kfree(info->pseudo_palette);
+	}
+	if (remapped_fbuf != NULL)
+		iounmap(remapped_fbuf);
+	if (remapped_regs != NULL)
+		iounmap(remapped_regs);
+	if (remapped_base != NULL)
+		iounmap(remapped_base);
+	if (info)
+		framebuffer_release(info);
+	return err;
+}
+
+
+static int w100fb_remove(struct platform_device *pdev)
+{
+	struct fb_info *info = platform_get_drvdata(pdev);
+	struct w100fb_par *par=info->par;
+
+	device_remove_file(&pdev->dev, &dev_attr_fastpllclk);
+	device_remove_file(&pdev->dev, &dev_attr_reg_read);
+	device_remove_file(&pdev->dev, &dev_attr_reg_write);
+	device_remove_file(&pdev->dev, &dev_attr_flip);
+
+	unregister_framebuffer(info);
+
+	vfree(par->saved_intmem);
+	vfree(par->saved_extmem);
+	kfree(info->pseudo_palette);
+	fb_dealloc_cmap(&info->cmap);
+
+	iounmap(remapped_base);
+	iounmap(remapped_regs);
+	iounmap(remapped_fbuf);
+
+	framebuffer_release(info);
+
+	return 0;
+}
+
+
+/* ------------------- chipset specific functions -------------------------- */
+
+
+static void w100_soft_reset(void)
+{
+	u16 val = readw((u16 *) remapped_base + cfgSTATUS);
+	writew(val | 0x08, (u16 *) remapped_base + cfgSTATUS);
+	udelay(100);
+	writew(0x00, (u16 *) remapped_base + cfgSTATUS);
+	udelay(100);
+}
+
+static void w100_update_disable(void)
+{
+	union disp_db_buf_cntl_wr_u disp_db_buf_wr_cntl;
+
+	/* Prevent display updates */
+	disp_db_buf_wr_cntl.f.db_buf_cntl = 0x1e;
+	disp_db_buf_wr_cntl.f.update_db_buf = 0;
+	disp_db_buf_wr_cntl.f.en_db_buf = 0;
+	writel((u32) (disp_db_buf_wr_cntl.val), remapped_regs + mmDISP_DB_BUF_CNTL);
+}
+
+static void w100_update_enable(void)
+{
+	union disp_db_buf_cntl_wr_u disp_db_buf_wr_cntl;
+
+	/* Enable display updates */
+	disp_db_buf_wr_cntl.f.db_buf_cntl = 0x1e;
+	disp_db_buf_wr_cntl.f.update_db_buf = 1;
+	disp_db_buf_wr_cntl.f.en_db_buf = 1;
+	writel((u32) (disp_db_buf_wr_cntl.val), remapped_regs + mmDISP_DB_BUF_CNTL);
+}
+
+unsigned long w100fb_gpio_read(int port)
+{
+	unsigned long value;
+
+	if (port==W100_GPIO_PORT_A)
+		value = readl(remapped_regs + mmGPIO_DATA);
+	else
+		value = readl(remapped_regs + mmGPIO_DATA2);
+
+	return value;
+}
+
+void w100fb_gpio_write(int port, unsigned long value)
+{
+	if (port==W100_GPIO_PORT_A)
+		writel(value, remapped_regs + mmGPIO_DATA);
+	else
+		writel(value, remapped_regs + mmGPIO_DATA2);
+}
+EXPORT_SYMBOL(w100fb_gpio_read);
+EXPORT_SYMBOL(w100fb_gpio_write);
+
+/*
+ * Initialization of critical w100 hardware
+ */
+static void w100_hw_init(struct w100fb_par *par)
+{
+	u32 temp32;
+	union cif_cntl_u cif_cntl;
+	union intf_cntl_u intf_cntl;
+	union cfgreg_base_u cfgreg_base;
+	union wrap_top_dir_u wrap_top_dir;
+	union cif_read_dbg_u cif_read_dbg;
+	union cpu_defaults_u cpu_default;
+	union cif_write_dbg_u cif_write_dbg;
+	union wrap_start_dir_u wrap_start_dir;
+	union cif_io_u cif_io;
+	struct w100_gpio_regs *gpio = par->mach->gpio;
+
+	w100_soft_reset();
+
+	/* This is what the fpga_init code does on reset. May be wrong
+	   but there is little info available */
+	writel(0x31, remapped_regs + mmSCRATCH_UMSK);
+	for (temp32 = 0; temp32 < 10000; temp32++)
+		readl(remapped_regs + mmSCRATCH_UMSK);
+	writel(0x30, remapped_regs + mmSCRATCH_UMSK);
+
+	/* Set up CIF */
+	cif_io.val = defCIF_IO;
+	writel((u32)(cif_io.val), remapped_regs + mmCIF_IO);
+
+	cif_write_dbg.val = readl(remapped_regs + mmCIF_WRITE_DBG);
+	cif_write_dbg.f.dis_packer_ful_during_rbbm_timeout = 0;
+	cif_write_dbg.f.en_dword_split_to_rbbm = 1;
+	cif_write_dbg.f.dis_timeout_during_rbbm = 1;
+	writel((u32) (cif_write_dbg.val), remapped_regs + mmCIF_WRITE_DBG);
+
+	cif_read_dbg.val = readl(remapped_regs + mmCIF_READ_DBG);
+	cif_read_dbg.f.dis_rd_same_byte_to_trig_fetch = 1;
+	writel((u32) (cif_read_dbg.val), remapped_regs + mmCIF_READ_DBG);
+
+	cif_cntl.val = readl(remapped_regs + mmCIF_CNTL);
+	cif_cntl.f.dis_system_bits = 1;
+	cif_cntl.f.dis_mr = 1;
+	cif_cntl.f.en_wait_to_compensate_dq_prop_dly = 0;
+	cif_cntl.f.intb_oe = 1;
+	cif_cntl.f.interrupt_active_high = 1;
+	writel((u32) (cif_cntl.val), remapped_regs + mmCIF_CNTL);
+
+	/* Setup cfgINTF_CNTL and cfgCPU defaults */
+	intf_cntl.val = defINTF_CNTL;
+	intf_cntl.f.ad_inc_a = 1;
+	intf_cntl.f.ad_inc_b = 1;
+	intf_cntl.f.rd_data_rdy_a = 0;
+	intf_cntl.f.rd_data_rdy_b = 0;
+	writeb((u8) (intf_cntl.val), remapped_base + cfgINTF_CNTL);
+
+	cpu_default.val = defCPU_DEFAULTS;
+	cpu_default.f.access_ind_addr_a = 1;
+	cpu_default.f.access_ind_addr_b = 1;
+	cpu_default.f.access_scratch_reg = 1;
+	cpu_default.f.transition_size = 0;
+	writeb((u8) (cpu_default.val), remapped_base + cfgCPU_DEFAULTS);
+
+	/* set up the apertures */
+	writeb((u8) (W100_REG_BASE >> 16), remapped_base + cfgREG_BASE);
+
+	cfgreg_base.val = defCFGREG_BASE;
+	cfgreg_base.f.cfgreg_base = W100_CFG_BASE;
+	writel((u32) (cfgreg_base.val), remapped_regs + mmCFGREG_BASE);
+
+	wrap_start_dir.val = defWRAP_START_DIR;
+	wrap_start_dir.f.start_addr = WRAP_BUF_BASE_VALUE >> 1;
+	writel((u32) (wrap_start_dir.val), remapped_regs + mmWRAP_START_DIR);
+
+	wrap_top_dir.val = defWRAP_TOP_DIR;
+	wrap_top_dir.f.top_addr = WRAP_BUF_TOP_VALUE >> 1;
+	writel((u32) (wrap_top_dir.val), remapped_regs + mmWRAP_TOP_DIR);
+
+	writel((u32) 0x2440, remapped_regs + mmRBBM_CNTL);
+
+	/* Set the hardware to 565 colour */
+	temp32 = readl(remapped_regs + mmDISP_DEBUG2);
+	temp32 &= 0xff7fffff;
+	temp32 |= 0x00800000;
+	writel(temp32, remapped_regs + mmDISP_DEBUG2);
+
+	/* Initialise the GPIO lines */
+	if (gpio) {
+		writel(gpio->init_data1, remapped_regs + mmGPIO_DATA);
+		writel(gpio->init_data2, remapped_regs + mmGPIO_DATA2);
+		writel(gpio->gpio_dir1,  remapped_regs + mmGPIO_CNTL1);
+		writel(gpio->gpio_oe1,   remapped_regs + mmGPIO_CNTL2);
+		writel(gpio->gpio_dir2,  remapped_regs + mmGPIO_CNTL3);
+		writel(gpio->gpio_oe2,   remapped_regs + mmGPIO_CNTL4);
+	}
+}
+
+
+struct power_state {
+	union clk_pin_cntl_u clk_pin_cntl;
+	union pll_ref_fb_div_u pll_ref_fb_div;
+	union pll_cntl_u pll_cntl;
+	union sclk_cntl_u sclk_cntl;
+	union pclk_cntl_u pclk_cntl;
+	union pwrmgt_cntl_u pwrmgt_cntl;
+	int auto_mode;  /* system clock auto changing? */
+};
+
+
+static struct power_state w100_pwr_state;
+
+/* The PLL Fout is determined by (XtalFreq/(M+1)) * ((N_int+1) + (N_fac/8)) */
+
+/* 12.5MHz Crystal PLL Table */
+static struct w100_pll_info xtal_12500000[] = {
+	/*freq     M   N_int    N_fac  tfgoal  lock_time */
+	{ 50,      0,   1,       0,     0xe0,        56},  /*  50.00 MHz */
+	{ 75,      0,   5,       0,     0xde,        37},  /*  75.00 MHz */
+	{100,      0,   7,       0,     0xe0,        28},  /* 100.00 MHz */
+	{125,      0,   9,       0,     0xe0,        22},  /* 125.00 MHz */
+	{150,      0,   11,      0,     0xe0,        17},  /* 150.00 MHz */
+	{  0,      0,   0,       0,        0,         0},  /* Terminator */
+};
+
+/* 14.318MHz Crystal PLL Table */
+static struct w100_pll_info xtal_14318000[] = {
+	/*freq     M   N_int    N_fac  tfgoal  lock_time */
+	{ 40,      4,   13,      0,     0xe0,        80}, /* tfgoal guessed */
+	{ 50,      1,   6,       0,     0xe0,	     64}, /*  50.05 MHz */
+	{ 57,      2,   11,      0,     0xe0,        53}, /* tfgoal guessed */
+	{ 75,      0,   4,       3,     0xe0,	     43}, /*  75.08 MHz */
+	{100,      0,   6,       0,     0xe0,        32}, /* 100.10 MHz */
+	{  0,      0,   0,       0,        0,         0},
+};
+
+/* 16MHz Crystal PLL Table */
+static struct w100_pll_info xtal_16000000[] = {
+	/*freq     M   N_int    N_fac  tfgoal  lock_time */
+	{ 72,      1,   8,       0,     0xe0,        48}, /* tfgoal guessed */
+	{ 80,      1,   9,       0,     0xe0,        13}, /* tfgoal guessed */
+	{ 95,      1,   10,      7,     0xe0,        38}, /* tfgoal guessed */
+	{ 96,      1,   11,      0,     0xe0,        36}, /* tfgoal guessed */
+	{  0,      0,   0,       0,        0,         0},
+};
+
+static struct pll_entries {
+	int xtal_freq;
+	struct w100_pll_info *pll_table;
+} w100_pll_tables[] = {
+	{ 12500000, &xtal_12500000[0] },
+	{ 14318000, &xtal_14318000[0] },
+	{ 16000000, &xtal_16000000[0] },
+	{ 0 },
+};
+
+struct w100_pll_info *w100_get_xtal_table(unsigned int freq)
+{
+	struct pll_entries *pll_entry = w100_pll_tables;
+
+	do {
+		if (freq == pll_entry->xtal_freq)
+			return pll_entry->pll_table;
+		pll_entry++;
+	} while (pll_entry->xtal_freq);
+	return 0;
+}
+
+
+static unsigned int w100_get_testcount(unsigned int testclk_sel)
+{
+	union clk_test_cntl_u clk_test_cntl;
+
+	udelay(5);
+
+	/* Select the test clock source and reset */
+	clk_test_cntl.f.start_check_freq = 0x0;
+	clk_test_cntl.f.testclk_sel = testclk_sel;
+	clk_test_cntl.f.tstcount_rst = 0x1; /* set reset */
+	writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
+
+	clk_test_cntl.f.tstcount_rst = 0x0; /* clear reset */
+	writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
+
+	/* Run clock test */
+	clk_test_cntl.f.start_check_freq = 0x1;
+	writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
+
+	/* Give the test time to complete */
+	udelay(20);
+
+	/* Return the result */
+	clk_test_cntl.val = readl(remapped_regs + mmCLK_TEST_CNTL);
+	clk_test_cntl.f.start_check_freq = 0x0;
+	writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
+
+	return clk_test_cntl.f.test_count;
+}
+
+
+static int w100_pll_adjust(struct w100_pll_info *pll)
+{
+	unsigned int tf80;
+	unsigned int tf20;
+
+	/* Initial Settings */
+	w100_pwr_state.pll_cntl.f.pll_pwdn = 0x0;     /* power down */
+	w100_pwr_state.pll_cntl.f.pll_reset = 0x0;    /* not reset */
+	w100_pwr_state.pll_cntl.f.pll_tcpoff = 0x1;   /* Hi-Z */
+	w100_pwr_state.pll_cntl.f.pll_pvg = 0x0;      /* VCO gain = 0 */
+	w100_pwr_state.pll_cntl.f.pll_vcofr = 0x0;    /* VCO frequency range control = off */
+	w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0;  /* current offset inside VCO = 0 */
+	w100_pwr_state.pll_cntl.f.pll_ring_off = 0x0;
+
+	/* Wai Ming 80 percent of VDD 1.3V gives 1.04V, minimum operating voltage is 1.08V
+	 * therefore, commented out the following lines
+	 * tf80 meant tf100
+	 */
+	do {
+		/* set VCO input = 0.8 * VDD */
+		w100_pwr_state.pll_cntl.f.pll_dactal = 0xd;
+		writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
+
+		tf80 = w100_get_testcount(TESTCLK_SRC_PLL);
+		if (tf80 >= (pll->tfgoal)) {
+			/* set VCO input = 0.2 * VDD */
+			w100_pwr_state.pll_cntl.f.pll_dactal = 0x7;
+			writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
+
+			tf20 = w100_get_testcount(TESTCLK_SRC_PLL);
+			if (tf20 <= (pll->tfgoal))
+				return 1;  /* Success */
+
+			if ((w100_pwr_state.pll_cntl.f.pll_vcofr == 0x0) &&
+				((w100_pwr_state.pll_cntl.f.pll_pvg == 0x7) ||
+				(w100_pwr_state.pll_cntl.f.pll_ioffset == 0x0))) {
+				/* slow VCO config */
+				w100_pwr_state.pll_cntl.f.pll_vcofr = 0x1;
+				w100_pwr_state.pll_cntl.f.pll_pvg = 0x0;
+				w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0;
+				continue;
+			}
+		}
+		if ((w100_pwr_state.pll_cntl.f.pll_ioffset) < 0x3) {
+			w100_pwr_state.pll_cntl.f.pll_ioffset += 0x1;
+		} else if ((w100_pwr_state.pll_cntl.f.pll_pvg) < 0x7) {
+			w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0;
+			w100_pwr_state.pll_cntl.f.pll_pvg += 0x1;
+		} else {
+			return 0;  /* Error */
+		}
+	} while(1);
+}
+
+
+/*
+ * w100_pll_calibration
+ */
+static int w100_pll_calibration(struct w100_pll_info *pll)
+{
+	int status;
+
+	status = w100_pll_adjust(pll);
+
+	/* PLL Reset And Lock */
+	/* set VCO input = 0.5 * VDD */
+	w100_pwr_state.pll_cntl.f.pll_dactal = 0xa;
+	writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
+
+	udelay(1);  /* reset time */
+
+	/* enable charge pump */
+	w100_pwr_state.pll_cntl.f.pll_tcpoff = 0x0;  /* normal */
+	writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
+
+	/* set VCO input = Hi-Z, disable DAC */
+	w100_pwr_state.pll_cntl.f.pll_dactal = 0x0;
+	writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
+
+	udelay(400);  /* lock time */
+
+	/* PLL locked */
+
+	return status;
+}
+
+
+static int w100_pll_set_clk(struct w100_pll_info *pll)
+{
+	int status;
+
+	if (w100_pwr_state.auto_mode == 1)  /* auto mode */
+	{
+		w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_hw_en = 0x0;  /* disable fast to normal */
+		w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_hw_en = 0x0;  /* disable normal to fast */
+		writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL);
+	}
+
+	/* Set system clock source to XTAL whilst adjusting the PLL! */
+	w100_pwr_state.sclk_cntl.f.sclk_src_sel = CLK_SRC_XTAL;
+	writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL);
+
+	w100_pwr_state.pll_ref_fb_div.f.pll_ref_div = pll->M;
+	w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_int = pll->N_int;
+	w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_frac = pll->N_fac;
+	w100_pwr_state.pll_ref_fb_div.f.pll_lock_time = pll->lock_time;
+	writel((u32) (w100_pwr_state.pll_ref_fb_div.val), remapped_regs + mmPLL_REF_FB_DIV);
+
+	w100_pwr_state.pwrmgt_cntl.f.pwm_mode_req = 0;
+	writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL);
+
+	status = w100_pll_calibration(pll);
+
+	if (w100_pwr_state.auto_mode == 1)  /* auto mode */
+	{
+		w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_hw_en = 0x1;  /* reenable fast to normal */
+		w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_hw_en = 0x1;  /* reenable normal to fast  */
+		writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL);
+	}
+	return status;
+}
+
+/* freq = target frequency of the PLL */
+static int w100_set_pll_freq(struct w100fb_par *par, unsigned int freq)
+{
+	struct w100_pll_info *pll = par->pll_table;
+
+	do {
+		if (freq == pll->freq) {
+			return w100_pll_set_clk(pll);
+		}
+		pll++;
+	} while(pll->freq);
+	return 0;
+}
+
+/* Set up an initial state.  Some values/fields set
+   here will be overwritten. */
+static void w100_pwm_setup(struct w100fb_par *par)
+{
+	w100_pwr_state.clk_pin_cntl.f.osc_en = 0x1;
+	w100_pwr_state.clk_pin_cntl.f.osc_gain = 0x1f;
+	w100_pwr_state.clk_pin_cntl.f.dont_use_xtalin = 0x0;
+	w100_pwr_state.clk_pin_cntl.f.xtalin_pm_en = 0x0;
+	w100_pwr_state.clk_pin_cntl.f.xtalin_dbl_en = par->mach->xtal_dbl ? 1 : 0;
+	w100_pwr_state.clk_pin_cntl.f.cg_debug = 0x0;
+	writel((u32) (w100_pwr_state.clk_pin_cntl.val), remapped_regs + mmCLK_PIN_CNTL);
+
+	w100_pwr_state.sclk_cntl.f.sclk_src_sel = CLK_SRC_XTAL;
+	w100_pwr_state.sclk_cntl.f.sclk_post_div_fast = 0x0;  /* Pfast = 1 */
+	w100_pwr_state.sclk_cntl.f.sclk_clkon_hys = 0x3;
+	w100_pwr_state.sclk_cntl.f.sclk_post_div_slow = 0x0;  /* Pslow = 1 */
+	w100_pwr_state.sclk_cntl.f.disp_cg_ok2switch_en = 0x0;
+	w100_pwr_state.sclk_cntl.f.sclk_force_reg = 0x0;    /* Dynamic */
+	w100_pwr_state.sclk_cntl.f.sclk_force_disp = 0x0;   /* Dynamic */
+	w100_pwr_state.sclk_cntl.f.sclk_force_mc = 0x0;     /* Dynamic */
+	w100_pwr_state.sclk_cntl.f.sclk_force_extmc = 0x0;  /* Dynamic */
+	w100_pwr_state.sclk_cntl.f.sclk_force_cp = 0x0;     /* Dynamic */
+	w100_pwr_state.sclk_cntl.f.sclk_force_e2 = 0x0;     /* Dynamic */
+	w100_pwr_state.sclk_cntl.f.sclk_force_e3 = 0x0;     /* Dynamic */
+	w100_pwr_state.sclk_cntl.f.sclk_force_idct = 0x0;   /* Dynamic */
+	w100_pwr_state.sclk_cntl.f.sclk_force_bist = 0x0;   /* Dynamic */
+	w100_pwr_state.sclk_cntl.f.busy_extend_cp = 0x0;
+	w100_pwr_state.sclk_cntl.f.busy_extend_e2 = 0x0;
+	w100_pwr_state.sclk_cntl.f.busy_extend_e3 = 0x0;
+	w100_pwr_state.sclk_cntl.f.busy_extend_idct = 0x0;
+	writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL);
+
+	w100_pwr_state.pclk_cntl.f.pclk_src_sel = CLK_SRC_XTAL;
+	w100_pwr_state.pclk_cntl.f.pclk_post_div = 0x1;    /* P = 2 */
+	w100_pwr_state.pclk_cntl.f.pclk_force_disp = 0x0;  /* Dynamic */
+	writel((u32) (w100_pwr_state.pclk_cntl.val), remapped_regs + mmPCLK_CNTL);
+
+	w100_pwr_state.pll_ref_fb_div.f.pll_ref_div = 0x0;     /* M = 1 */
+	w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_int = 0x0;  /* N = 1.0 */
+	w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_frac = 0x0;
+	w100_pwr_state.pll_ref_fb_div.f.pll_reset_time = 0x5;
+	w100_pwr_state.pll_ref_fb_div.f.pll_lock_time = 0xff;
+	writel((u32) (w100_pwr_state.pll_ref_fb_div.val), remapped_regs + mmPLL_REF_FB_DIV);
+
+	w100_pwr_state.pll_cntl.f.pll_pwdn = 0x1;
+	w100_pwr_state.pll_cntl.f.pll_reset = 0x1;
+	w100_pwr_state.pll_cntl.f.pll_pm_en = 0x0;
+	w100_pwr_state.pll_cntl.f.pll_mode = 0x0;  /* uses VCO clock */
+	w100_pwr_state.pll_cntl.f.pll_refclk_sel = 0x0;
+	w100_pwr_state.pll_cntl.f.pll_fbclk_sel = 0x0;
+	w100_pwr_state.pll_cntl.f.pll_tcpoff = 0x0;
+	w100_pwr_state.pll_cntl.f.pll_pcp = 0x4;
+	w100_pwr_state.pll_cntl.f.pll_pvg = 0x0;
+	w100_pwr_state.pll_cntl.f.pll_vcofr = 0x0;
+	w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0;
+	w100_pwr_state.pll_cntl.f.pll_pecc_mode = 0x0;
+	w100_pwr_state.pll_cntl.f.pll_pecc_scon = 0x0;
+	w100_pwr_state.pll_cntl.f.pll_dactal = 0x0;  /* Hi-Z */
+	w100_pwr_state.pll_cntl.f.pll_cp_clip = 0x3;
+	w100_pwr_state.pll_cntl.f.pll_conf = 0x2;
+	w100_pwr_state.pll_cntl.f.pll_mbctrl = 0x2;
+	w100_pwr_state.pll_cntl.f.pll_ring_off = 0x0;
+	writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
+
+	w100_pwr_state.pwrmgt_cntl.f.pwm_enable = 0x0;
+	w100_pwr_state.pwrmgt_cntl.f.pwm_mode_req = 0x1;  /* normal mode (0, 1, 3) */
+	w100_pwr_state.pwrmgt_cntl.f.pwm_wakeup_cond = 0x0;
+	w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_hw_en = 0x0;
+	w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_hw_en = 0x0;
+	w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_cond = 0x1;  /* PM4,ENG */
+	w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_cond = 0x1;  /* PM4,ENG */
+	w100_pwr_state.pwrmgt_cntl.f.pwm_idle_timer = 0xFF;
+	w100_pwr_state.pwrmgt_cntl.f.pwm_busy_timer = 0xFF;
+	writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL);
+
+	w100_pwr_state.auto_mode = 0;  /* manual mode */
+}
+
+
+/*
+ * Setup the w100 clocks for the specified mode
+ */
+static void w100_init_clocks(struct w100fb_par *par)
+{
+	struct w100_mode *mode = par->mode;
+
+	if (mode->pixclk_src == CLK_SRC_PLL || mode->sysclk_src == CLK_SRC_PLL)
+		w100_set_pll_freq(par, (par->fastpll_mode && mode->fast_pll_freq) ? mode->fast_pll_freq : mode->pll_freq);
+
+	w100_pwr_state.sclk_cntl.f.sclk_src_sel = mode->sysclk_src;
+	w100_pwr_state.sclk_cntl.f.sclk_post_div_fast = mode->sysclk_divider;
+	w100_pwr_state.sclk_cntl.f.sclk_post_div_slow = mode->sysclk_divider;
+	writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL);
+}
+
+static void w100_init_lcd(struct w100fb_par *par)
+{
+	u32 temp32;
+	struct w100_mode *mode = par->mode;
+	struct w100_gen_regs *regs = par->mach->regs;
+	union active_h_disp_u active_h_disp;
+	union active_v_disp_u active_v_disp;
+	union graphic_h_disp_u graphic_h_disp;
+	union graphic_v_disp_u graphic_v_disp;
+	union crtc_total_u crtc_total;
+
+	/* w3200 doesn't like undefined bits being set so zero register values first */
+
+	active_h_disp.val = 0;
+	active_h_disp.f.active_h_start=mode->left_margin;
+	active_h_disp.f.active_h_end=mode->left_margin + mode->xres;
+	writel(active_h_disp.val, remapped_regs + mmACTIVE_H_DISP);
+
+	active_v_disp.val = 0;
+	active_v_disp.f.active_v_start=mode->upper_margin;
+	active_v_disp.f.active_v_end=mode->upper_margin + mode->yres;
+	writel(active_v_disp.val, remapped_regs + mmACTIVE_V_DISP);
+
+	graphic_h_disp.val = 0;
+	graphic_h_disp.f.graphic_h_start=mode->left_margin;
+	graphic_h_disp.f.graphic_h_end=mode->left_margin + mode->xres;
+	writel(graphic_h_disp.val, remapped_regs + mmGRAPHIC_H_DISP);
+
+	graphic_v_disp.val = 0;
+	graphic_v_disp.f.graphic_v_start=mode->upper_margin;
+	graphic_v_disp.f.graphic_v_end=mode->upper_margin + mode->yres;
+	writel(graphic_v_disp.val, remapped_regs + mmGRAPHIC_V_DISP);
+
+	crtc_total.val = 0;
+	crtc_total.f.crtc_h_total=mode->left_margin  + mode->xres + mode->right_margin;
+	crtc_total.f.crtc_v_total=mode->upper_margin + mode->yres + mode->lower_margin;
+	writel(crtc_total.val, remapped_regs + mmCRTC_TOTAL);
+
+	writel(mode->crtc_ss, remapped_regs + mmCRTC_SS);
+	writel(mode->crtc_ls, remapped_regs + mmCRTC_LS);
+	writel(mode->crtc_gs, remapped_regs + mmCRTC_GS);
+	writel(mode->crtc_vpos_gs, remapped_regs + mmCRTC_VPOS_GS);
+	writel(mode->crtc_rev, remapped_regs + mmCRTC_REV);
+	writel(mode->crtc_dclk, remapped_regs + mmCRTC_DCLK);
+	writel(mode->crtc_gclk, remapped_regs + mmCRTC_GCLK);
+	writel(mode->crtc_goe, remapped_regs + mmCRTC_GOE);
+	writel(mode->crtc_ps1_active, remapped_regs + mmCRTC_PS1_ACTIVE);
+
+	writel(regs->lcd_format, remapped_regs + mmLCD_FORMAT);
+	writel(regs->lcdd_cntl1, remapped_regs + mmLCDD_CNTL1);
+	writel(regs->lcdd_cntl2, remapped_regs + mmLCDD_CNTL2);
+	writel(regs->genlcd_cntl1, remapped_regs + mmGENLCD_CNTL1);
+	writel(regs->genlcd_cntl2, remapped_regs + mmGENLCD_CNTL2);
+	writel(regs->genlcd_cntl3, remapped_regs + mmGENLCD_CNTL3);
+
+	writel(0x00000000, remapped_regs + mmCRTC_FRAME);
+	writel(0x00000000, remapped_regs + mmCRTC_FRAME_VPOS);
+	writel(0x00000000, remapped_regs + mmCRTC_DEFAULT_COUNT);
+	writel(0x0000FF00, remapped_regs + mmLCD_BACKGROUND_COLOR);
+
+	/* Hack for overlay in ext memory */
+	temp32 = readl(remapped_regs + mmDISP_DEBUG2);
+	temp32 |= 0xc0000000;
+	writel(temp32, remapped_regs + mmDISP_DEBUG2);
+}
+
+
+static void w100_setup_memory(struct w100fb_par *par)
+{
+	union mc_ext_mem_location_u extmem_location;
+	union mc_fb_location_u intmem_location;
+	struct w100_mem_info *mem = par->mach->mem;
+	struct w100_bm_mem_info *bm_mem = par->mach->bm_mem;
+
+	if (!par->extmem_active) {
+		w100_suspend(W100_SUSPEND_EXTMEM);
+
+		/* Map Internal Memory at FB Base */
+		intmem_location.f.mc_fb_start = W100_FB_BASE >> 8;
+		intmem_location.f.mc_fb_top = (W100_FB_BASE+MEM_INT_SIZE) >> 8;
+		writel((u32) (intmem_location.val), remapped_regs + mmMC_FB_LOCATION);
+
+		/* Unmap External Memory - value is *probably* irrelevant but may have meaning
+		   to acceleration libraries */
+		extmem_location.f.mc_ext_mem_start = MEM_EXT_BASE_VALUE >> 8;
+		extmem_location.f.mc_ext_mem_top = (MEM_EXT_BASE_VALUE-1) >> 8;
+		writel((u32) (extmem_location.val), remapped_regs + mmMC_EXT_MEM_LOCATION);
+	} else {
+		/* Map Internal Memory to its default location */
+		intmem_location.f.mc_fb_start = MEM_INT_BASE_VALUE >> 8;
+		intmem_location.f.mc_fb_top = (MEM_INT_BASE_VALUE+MEM_INT_SIZE) >> 8;
+		writel((u32) (intmem_location.val), remapped_regs + mmMC_FB_LOCATION);
+
+		/* Map External Memory at FB Base */
+		extmem_location.f.mc_ext_mem_start = W100_FB_BASE >> 8;
+		extmem_location.f.mc_ext_mem_top = (W100_FB_BASE+par->mach->mem->size) >> 8;
+		writel((u32) (extmem_location.val), remapped_regs + mmMC_EXT_MEM_LOCATION);
+
+		writel(0x00007800, remapped_regs + mmMC_BIST_CTRL);
+		writel(mem->ext_cntl, remapped_regs + mmMEM_EXT_CNTL);
+		writel(0x00200021, remapped_regs + mmMEM_SDRAM_MODE_REG);
+		udelay(100);
+		writel(0x80200021, remapped_regs + mmMEM_SDRAM_MODE_REG);
+		udelay(100);
+		writel(mem->sdram_mode_reg, remapped_regs + mmMEM_SDRAM_MODE_REG);
+		udelay(100);
+		writel(mem->ext_timing_cntl, remapped_regs + mmMEM_EXT_TIMING_CNTL);
+		writel(mem->io_cntl, remapped_regs + mmMEM_IO_CNTL);
+		if (bm_mem) {
+			writel(bm_mem->ext_mem_bw, remapped_regs + mmBM_EXT_MEM_BANDWIDTH);
+			writel(bm_mem->offset, remapped_regs + mmBM_OFFSET);
+			writel(bm_mem->ext_timing_ctl, remapped_regs + mmBM_MEM_EXT_TIMING_CNTL);
+			writel(bm_mem->ext_cntl, remapped_regs + mmBM_MEM_EXT_CNTL);
+			writel(bm_mem->mode_reg, remapped_regs + mmBM_MEM_MODE_REG);
+			writel(bm_mem->io_cntl, remapped_regs + mmBM_MEM_IO_CNTL);
+			writel(bm_mem->config, remapped_regs + mmBM_CONFIG);
+		}
+	}
+}
+
+static void w100_set_dispregs(struct w100fb_par *par)
+{
+	unsigned long rot=0, divider, offset=0;
+	union graphic_ctrl_u graphic_ctrl;
+
+	/* See if the mode has been rotated */
+	if (par->xres == par->mode->xres) {
+		if (par->flip) {
+			rot=3; /* 180 degree */
+			offset=(par->xres * par->yres) - 1;
+		} /* else 0 degree */
+		divider = par->mode->pixclk_divider;
+	} else {
+		if (par->flip) {
+			rot=2; /* 270 degree */
+			offset=par->xres - 1;
+		} else {
+			rot=1; /* 90 degree */
+			offset=par->xres * (par->yres - 1);
+		}
+		divider = par->mode->pixclk_divider_rotated;
+	}
+
+	graphic_ctrl.val = 0; /* w32xx doesn't like undefined bits */
+	switch (par->chip_id) {
+		case CHIP_ID_W100:
+			graphic_ctrl.f_w100.color_depth=6;
+			graphic_ctrl.f_w100.en_crtc=1;
+			graphic_ctrl.f_w100.en_graphic_req=1;
+			graphic_ctrl.f_w100.en_graphic_crtc=1;
+			graphic_ctrl.f_w100.lcd_pclk_on=1;
+			graphic_ctrl.f_w100.lcd_sclk_on=1;
+			graphic_ctrl.f_w100.low_power_on=0;
+			graphic_ctrl.f_w100.req_freq=0;
+			graphic_ctrl.f_w100.portrait_mode=rot;
+
+			/* Zaurus needs this */
+			switch(par->xres) {
+				case 240:
+				case 320:
+				default:
+					graphic_ctrl.f_w100.total_req_graphic=0xa0;
+					break;
+				case 480:
+				case 640:
+					switch(rot) {
+						case 0:  /* 0 */
+						case 3:  /* 180 */
+							graphic_ctrl.f_w100.low_power_on=1;
+							graphic_ctrl.f_w100.req_freq=5;
+						break;
+						case 1:  /* 90 */
+						case 2:  /* 270 */
+							graphic_ctrl.f_w100.req_freq=4;
+							break;
+						default:
+							break;
+					}
+					graphic_ctrl.f_w100.total_req_graphic=0xf0;
+					break;
+			}
+			break;
+		case CHIP_ID_W3200:
+		case CHIP_ID_W3220:
+			graphic_ctrl.f_w32xx.color_depth=6;
+			graphic_ctrl.f_w32xx.en_crtc=1;
+			graphic_ctrl.f_w32xx.en_graphic_req=1;
+			graphic_ctrl.f_w32xx.en_graphic_crtc=1;
+			graphic_ctrl.f_w32xx.lcd_pclk_on=1;
+			graphic_ctrl.f_w32xx.lcd_sclk_on=1;
+			graphic_ctrl.f_w32xx.low_power_on=0;
+			graphic_ctrl.f_w32xx.req_freq=0;
+			graphic_ctrl.f_w32xx.total_req_graphic=par->mode->xres >> 1; /* panel xres, not mode */
+			graphic_ctrl.f_w32xx.portrait_mode=rot;
+			break;
+	}
+
+	/* Set the pixel clock source and divider */
+	w100_pwr_state.pclk_cntl.f.pclk_src_sel = par->mode->pixclk_src;
+	w100_pwr_state.pclk_cntl.f.pclk_post_div = divider;
+	writel((u32) (w100_pwr_state.pclk_cntl.val), remapped_regs + mmPCLK_CNTL);
+
+	writel(graphic_ctrl.val, remapped_regs + mmGRAPHIC_CTRL);
+	writel(W100_FB_BASE + ((offset * BITS_PER_PIXEL/8)&~0x03UL), remapped_regs + mmGRAPHIC_OFFSET);
+	writel((par->xres*BITS_PER_PIXEL/8), remapped_regs + mmGRAPHIC_PITCH);
+}
+
+
+/*
+ * Work out how long the sync pulse lasts
+ * Value is 1/(time in seconds)
+ */
+static void calc_hsync(struct w100fb_par *par)
+{
+	unsigned long hsync;
+	struct w100_mode *mode = par->mode;
+	union crtc_ss_u crtc_ss;
+
+	if (mode->pixclk_src == CLK_SRC_XTAL)
+		hsync=par->mach->xtal_freq;
+	else
+		hsync=((par->fastpll_mode && mode->fast_pll_freq) ? mode->fast_pll_freq : mode->pll_freq)*100000;
+
+	hsync /= (w100_pwr_state.pclk_cntl.f.pclk_post_div + 1);
+
+	crtc_ss.val = readl(remapped_regs + mmCRTC_SS);
+	if (crtc_ss.val)
+		par->hsync_len = hsync / (crtc_ss.f.ss_end-crtc_ss.f.ss_start);
+	else
+		par->hsync_len = 0;
+}
+
+static void w100_suspend(u32 mode)
+{
+	u32 val;
+
+	writel(0x7FFF8000, remapped_regs + mmMC_EXT_MEM_LOCATION);
+	writel(0x00FF0000, remapped_regs + mmMC_PERF_MON_CNTL);
+
+	val = readl(remapped_regs + mmMEM_EXT_TIMING_CNTL);
+	val &= ~(0x00100000);  /* bit20=0 */
+	val |= 0xFF000000;     /* bit31:24=0xff */
+	writel(val, remapped_regs + mmMEM_EXT_TIMING_CNTL);
+
+	val = readl(remapped_regs + mmMEM_EXT_CNTL);
+	val &= ~(0x00040000);  /* bit18=0 */
+	val |= 0x00080000;     /* bit19=1 */
+	writel(val, remapped_regs + mmMEM_EXT_CNTL);
+
+	udelay(1);  /* wait 1us */
+
+	if (mode == W100_SUSPEND_EXTMEM) {
+		/* CKE: Tri-State */
+		val = readl(remapped_regs + mmMEM_EXT_CNTL);
+		val |= 0x40000000;  /* bit30=1 */
+		writel(val, remapped_regs + mmMEM_EXT_CNTL);
+
+		/* CLK: Stop */
+		val = readl(remapped_regs + mmMEM_EXT_CNTL);
+		val &= ~(0x00000001);  /* bit0=0 */
+		writel(val, remapped_regs + mmMEM_EXT_CNTL);
+	} else {
+		writel(0x00000000, remapped_regs + mmSCLK_CNTL);
+		writel(0x000000BF, remapped_regs + mmCLK_PIN_CNTL);
+		writel(0x00000015, remapped_regs + mmPWRMGT_CNTL);
+
+		udelay(5);
+
+		val = readl(remapped_regs + mmPLL_CNTL);
+		val |= 0x00000004;  /* bit2=1 */
+		writel(val, remapped_regs + mmPLL_CNTL);
+
+		writel(0x00000000, remapped_regs + mmLCDD_CNTL1);
+		writel(0x00000000, remapped_regs + mmLCDD_CNTL2);
+		writel(0x00000000, remapped_regs + mmGENLCD_CNTL1);
+		writel(0x00000000, remapped_regs + mmGENLCD_CNTL2);
+		writel(0x00000000, remapped_regs + mmGENLCD_CNTL3);
+
+		val = readl(remapped_regs + mmMEM_EXT_CNTL);
+		val |= 0xF0000000;
+		val &= ~(0x00000001);
+		writel(val, remapped_regs + mmMEM_EXT_CNTL);
+
+		writel(0x0000001d, remapped_regs + mmPWRMGT_CNTL);
+	}
+}
+
+static void w100_vsync(void)
+{
+	u32 tmp;
+	int timeout = 30000;  /* VSync timeout = 30[ms] > 16.8[ms] */
+
+	tmp = readl(remapped_regs + mmACTIVE_V_DISP);
+
+	/* set vline pos  */
+	writel((tmp >> 16) & 0x3ff, remapped_regs + mmDISP_INT_CNTL);
+
+	/* disable vline irq */
+	tmp = readl(remapped_regs + mmGEN_INT_CNTL);
+
+	tmp &= ~0x00000002;
+	writel(tmp, remapped_regs + mmGEN_INT_CNTL);
+
+	/* clear vline irq status */
+	writel(0x00000002, remapped_regs + mmGEN_INT_STATUS);
+
+	/* enable vline irq */
+	writel((tmp | 0x00000002), remapped_regs + mmGEN_INT_CNTL);
+
+	/* clear vline irq status */
+	writel(0x00000002, remapped_regs + mmGEN_INT_STATUS);
+
+	while(timeout > 0) {
+		if (readl(remapped_regs + mmGEN_INT_STATUS) & 0x00000002)
+			break;
+		udelay(1);
+		timeout--;
+	}
+
+	/* disable vline irq */
+	writel(tmp, remapped_regs + mmGEN_INT_CNTL);
+
+	/* clear vline irq status */
+	writel(0x00000002, remapped_regs + mmGEN_INT_STATUS);
+}
+
+static struct platform_driver w100fb_driver = {
+	.probe		= w100fb_probe,
+	.remove		= w100fb_remove,
+	.suspend	= w100fb_suspend,
+	.resume		= w100fb_resume,
+	.driver		= {
+		.name	= "w100fb",
+	},
+};
+
+module_platform_driver(w100fb_driver);
+
+MODULE_DESCRIPTION("ATI Imageon w100 framebuffer driver");
+MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-54-g00ecf