From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?= Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- include/linux/ethtool.h | 285 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 285 insertions(+) create mode 100644 include/linux/ethtool.h (limited to 'include/linux/ethtool.h') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h new file mode 100644 index 000000000..653dc9c4e --- /dev/null +++ b/include/linux/ethtool.h @@ -0,0 +1,285 @@ +/* + * ethtool.h: Defines for Linux ethtool. + * + * Copyright (C) 1998 David S. Miller (davem@redhat.com) + * Copyright 2001 Jeff Garzik + * Portions Copyright 2001 Sun Microsystems (thockin@sun.com) + * Portions Copyright 2002 Intel (eli.kupermann@intel.com, + * christopher.leech@intel.com, + * scott.feldman@intel.com) + * Portions Copyright (C) Sun Microsystems 2008 + */ +#ifndef _LINUX_ETHTOOL_H +#define _LINUX_ETHTOOL_H + +#include +#include + +#ifdef CONFIG_COMPAT + +struct compat_ethtool_rx_flow_spec { + u32 flow_type; + union ethtool_flow_union h_u; + struct ethtool_flow_ext h_ext; + union ethtool_flow_union m_u; + struct ethtool_flow_ext m_ext; + compat_u64 ring_cookie; + u32 location; +}; + +struct compat_ethtool_rxnfc { + u32 cmd; + u32 flow_type; + compat_u64 data; + struct compat_ethtool_rx_flow_spec fs; + u32 rule_cnt; + u32 rule_locs[0]; +}; + +#endif /* CONFIG_COMPAT */ + +#include + +extern int __ethtool_get_settings(struct net_device *dev, + struct ethtool_cmd *cmd); + +/** + * enum ethtool_phys_id_state - indicator state for physical identification + * @ETHTOOL_ID_INACTIVE: Physical ID indicator should be deactivated + * @ETHTOOL_ID_ACTIVE: Physical ID indicator should be activated + * @ETHTOOL_ID_ON: LED should be turned on (used iff %ETHTOOL_ID_ACTIVE + * is not supported) + * @ETHTOOL_ID_OFF: LED should be turned off (used iff %ETHTOOL_ID_ACTIVE + * is not supported) + */ +enum ethtool_phys_id_state { + ETHTOOL_ID_INACTIVE, + ETHTOOL_ID_ACTIVE, + ETHTOOL_ID_ON, + ETHTOOL_ID_OFF +}; + +enum { + ETH_RSS_HASH_TOP_BIT, /* Configurable RSS hash function - Toeplitz */ + ETH_RSS_HASH_XOR_BIT, /* Configurable RSS hash function - Xor */ + + /* + * Add your fresh new hash function bits above and remember to update + * rss_hash_func_strings[] in ethtool.c + */ + ETH_RSS_HASH_FUNCS_COUNT +}; + +#define __ETH_RSS_HASH_BIT(bit) ((u32)1 << (bit)) +#define __ETH_RSS_HASH(name) __ETH_RSS_HASH_BIT(ETH_RSS_HASH_##name##_BIT) + +#define ETH_RSS_HASH_TOP __ETH_RSS_HASH(TOP) +#define ETH_RSS_HASH_XOR __ETH_RSS_HASH(XOR) + +#define ETH_RSS_HASH_UNKNOWN 0 +#define ETH_RSS_HASH_NO_CHANGE 0 + +struct net_device; + +/* Some generic methods drivers may use in their ethtool_ops */ +u32 ethtool_op_get_link(struct net_device *dev); +int ethtool_op_get_ts_info(struct net_device *dev, struct ethtool_ts_info *eti); + +/** + * ethtool_rxfh_indir_default - get default value for RX flow hash indirection + * @index: Index in RX flow hash indirection table + * @n_rx_rings: Number of RX rings to use + * + * This function provides the default policy for RX flow hash indirection. + */ +static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings) +{ + return index % n_rx_rings; +} + +/** + * struct ethtool_ops - optional netdev operations + * @get_settings: Get various device settings including Ethernet link + * settings. The @cmd parameter is expected to have been cleared + * before get_settings is called. Returns a negative error code or + * zero. + * @set_settings: Set various device settings including Ethernet link + * settings. Returns a negative error code or zero. + * @get_drvinfo: Report driver/device information. Should only set the + * @driver, @version, @fw_version and @bus_info fields. If not + * implemented, the @driver and @bus_info fields will be filled in + * according to the netdev's parent device. + * @get_regs_len: Get buffer length required for @get_regs + * @get_regs: Get device registers + * @get_wol: Report whether Wake-on-Lan is enabled + * @set_wol: Turn Wake-on-Lan on or off. Returns a negative error code + * or zero. + * @get_msglevel: Report driver message level. This should be the value + * of the @msg_enable field used by netif logging functions. + * @set_msglevel: Set driver message level + * @nway_reset: Restart autonegotiation. Returns a negative error code + * or zero. + * @get_link: Report whether physical link is up. Will only be called if + * the netdev is up. Should usually be set to ethtool_op_get_link(), + * which uses netif_carrier_ok(). + * @get_eeprom: Read data from the device EEPROM. + * Should fill in the magic field. Don't need to check len for zero + * or wraparound. Fill in the data argument with the eeprom values + * from offset to offset + len. Update len to the amount read. + * Returns an error or zero. + * @set_eeprom: Write data to the device EEPROM. + * Should validate the magic field. Don't need to check len for zero + * or wraparound. Update len to the amount written. Returns an error + * or zero. + * @get_coalesce: Get interrupt coalescing parameters. Returns a negative + * error code or zero. + * @set_coalesce: Set interrupt coalescing parameters. Returns a negative + * error code or zero. + * @get_ringparam: Report ring sizes + * @set_ringparam: Set ring sizes. Returns a negative error code or zero. + * @get_pauseparam: Report pause parameters + * @set_pauseparam: Set pause parameters. Returns a negative error code + * or zero. + * @self_test: Run specified self-tests + * @get_strings: Return a set of strings that describe the requested objects + * @set_phys_id: Identify the physical devices, e.g. by flashing an LED + * attached to it. The implementation may update the indicator + * asynchronously or synchronously, but in either case it must return + * quickly. It is initially called with the argument %ETHTOOL_ID_ACTIVE, + * and must either activate asynchronous updates and return zero, return + * a negative error or return a positive frequency for synchronous + * indication (e.g. 1 for one on/off cycle per second). If it returns + * a frequency then it will be called again at intervals with the + * argument %ETHTOOL_ID_ON or %ETHTOOL_ID_OFF and should set the state of + * the indicator accordingly. Finally, it is called with the argument + * %ETHTOOL_ID_INACTIVE and must deactivate the indicator. Returns a + * negative error code or zero. + * @get_ethtool_stats: Return extended statistics about the device. + * This is only useful if the device maintains statistics not + * included in &struct rtnl_link_stats64. + * @begin: Function to be called before any other operation. Returns a + * negative error code or zero. + * @complete: Function to be called after any other operation except + * @begin. Will be called even if the other operation failed. + * @get_priv_flags: Report driver-specific feature flags. + * @set_priv_flags: Set driver-specific feature flags. Returns a negative + * error code or zero. + * @get_sset_count: Get number of strings that @get_strings will write. + * @get_rxnfc: Get RX flow classification rules. Returns a negative + * error code or zero. + * @set_rxnfc: Set RX flow classification rules. Returns a negative + * error code or zero. + * @flash_device: Write a firmware image to device's flash memory. + * Returns a negative error code or zero. + * @reset: Reset (part of) the device, as specified by a bitmask of + * flags from &enum ethtool_reset_flags. Returns a negative + * error code or zero. + * @get_rxfh_key_size: Get the size of the RX flow hash key. + * Returns zero if not supported for this specific device. + * @get_rxfh_indir_size: Get the size of the RX flow hash indirection table. + * Returns zero if not supported for this specific device. + * @get_rxfh: Get the contents of the RX flow hash indirection table, hash key + * and/or hash function. + * Returns a negative error code or zero. + * @set_rxfh: Set the contents of the RX flow hash indirection table, hash + * key, and/or hash function. Arguments which are set to %NULL or zero + * will remain unchanged. + * Returns a negative error code or zero. An error code must be returned + * if at least one unsupported change was requested. + * @get_channels: Get number of channels. + * @set_channels: Set number of channels. Returns a negative error code or + * zero. + * @get_dump_flag: Get dump flag indicating current dump length, version, + * and flag of the device. + * @get_dump_data: Get dump data. + * @set_dump: Set dump specific flags to the device. + * @get_ts_info: Get the time stamping and PTP hardware clock capabilities. + * Drivers supporting transmit time stamps in software should set this to + * ethtool_op_get_ts_info(). + * @get_module_info: Get the size and type of the eeprom contained within + * a plug-in module. + * @get_module_eeprom: Get the eeprom information from the plug-in module + * @get_eee: Get Energy-Efficient (EEE) supported and status. + * @set_eee: Set EEE status (enable/disable) as well as LPI timers. + * + * All operations are optional (i.e. the function pointer may be set + * to %NULL) and callers must take this into account. Callers must + * hold the RTNL lock. + * + * See the structures used by these operations for further documentation. + * Note that for all operations using a structure ending with a zero- + * length array, the array is allocated separately in the kernel and + * is passed to the driver as an additional parameter. + * + * See &struct net_device and &struct net_device_ops for documentation + * of the generic netdev features interface. + */ +struct ethtool_ops { + int (*get_settings)(struct net_device *, struct ethtool_cmd *); + int (*set_settings)(struct net_device *, struct ethtool_cmd *); + void (*get_drvinfo)(struct net_device *, struct ethtool_drvinfo *); + int (*get_regs_len)(struct net_device *); + void (*get_regs)(struct net_device *, struct ethtool_regs *, void *); + void (*get_wol)(struct net_device *, struct ethtool_wolinfo *); + int (*set_wol)(struct net_device *, struct ethtool_wolinfo *); + u32 (*get_msglevel)(struct net_device *); + void (*set_msglevel)(struct net_device *, u32); + int (*nway_reset)(struct net_device *); + u32 (*get_link)(struct net_device *); + int (*get_eeprom_len)(struct net_device *); + int (*get_eeprom)(struct net_device *, + struct ethtool_eeprom *, u8 *); + int (*set_eeprom)(struct net_device *, + struct ethtool_eeprom *, u8 *); + int (*get_coalesce)(struct net_device *, struct ethtool_coalesce *); + int (*set_coalesce)(struct net_device *, struct ethtool_coalesce *); + void (*get_ringparam)(struct net_device *, + struct ethtool_ringparam *); + int (*set_ringparam)(struct net_device *, + struct ethtool_ringparam *); + void (*get_pauseparam)(struct net_device *, + struct ethtool_pauseparam*); + int (*set_pauseparam)(struct net_device *, + struct ethtool_pauseparam*); + void (*self_test)(struct net_device *, struct ethtool_test *, u64 *); + void (*get_strings)(struct net_device *, u32 stringset, u8 *); + int (*set_phys_id)(struct net_device *, enum ethtool_phys_id_state); + void (*get_ethtool_stats)(struct net_device *, + struct ethtool_stats *, u64 *); + int (*begin)(struct net_device *); + void (*complete)(struct net_device *); + u32 (*get_priv_flags)(struct net_device *); + int (*set_priv_flags)(struct net_device *, u32); + int (*get_sset_count)(struct net_device *, int); + int (*get_rxnfc)(struct net_device *, + struct ethtool_rxnfc *, u32 *rule_locs); + int (*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *); + int (*flash_device)(struct net_device *, struct ethtool_flash *); + int (*reset)(struct net_device *, u32 *); + u32 (*get_rxfh_key_size)(struct net_device *); + u32 (*get_rxfh_indir_size)(struct net_device *); + int (*get_rxfh)(struct net_device *, u32 *indir, u8 *key, + u8 *hfunc); + int (*set_rxfh)(struct net_device *, const u32 *indir, + const u8 *key, const u8 hfunc); + void (*get_channels)(struct net_device *, struct ethtool_channels *); + int (*set_channels)(struct net_device *, struct ethtool_channels *); + int (*get_dump_flag)(struct net_device *, struct ethtool_dump *); + int (*get_dump_data)(struct net_device *, + struct ethtool_dump *, void *); + int (*set_dump)(struct net_device *, struct ethtool_dump *); + int (*get_ts_info)(struct net_device *, struct ethtool_ts_info *); + int (*get_module_info)(struct net_device *, + struct ethtool_modinfo *); + int (*get_module_eeprom)(struct net_device *, + struct ethtool_eeprom *, u8 *); + int (*get_eee)(struct net_device *, struct ethtool_eee *); + int (*set_eee)(struct net_device *, struct ethtool_eee *); + int (*get_tunable)(struct net_device *, + const struct ethtool_tunable *, void *); + int (*set_tunable)(struct net_device *, + const struct ethtool_tunable *, const void *); + + +}; +#endif /* _LINUX_ETHTOOL_H */ -- cgit v1.2.3