From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- include/linux/lcd.h | 130 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 130 insertions(+) create mode 100644 include/linux/lcd.h (limited to 'include/linux/lcd.h') diff --git a/include/linux/lcd.h b/include/linux/lcd.h new file mode 100644 index 000000000..504f6246f --- /dev/null +++ b/include/linux/lcd.h @@ -0,0 +1,130 @@ +/* + * LCD Lowlevel Control Abstraction + * + * Copyright (C) 2003,2004 Hewlett-Packard Company + * + */ + +#ifndef _LINUX_LCD_H +#define _LINUX_LCD_H + +#include +#include +#include +#include + +/* Notes on locking: + * + * lcd_device->ops_lock is an internal backlight lock protecting the ops + * field and no code outside the core should need to touch it. + * + * Access to set_power() is serialised by the update_lock mutex since + * most drivers seem to need this and historically get it wrong. + * + * Most drivers don't need locking on their get_power() method. + * If yours does, you need to implement it in the driver. You can use the + * update_lock mutex if appropriate. + * + * Any other use of the locks below is probably wrong. + */ + +struct lcd_device; +struct fb_info; + +struct lcd_properties { + /* The maximum value for contrast (read-only) */ + int max_contrast; +}; + +struct lcd_ops { + /* Get the LCD panel power status (0: full on, 1..3: controller + power on, flat panel power off, 4: full off), see FB_BLANK_XXX */ + int (*get_power)(struct lcd_device *); + /* + * Enable or disable power to the LCD(0: on; 4: off, see FB_BLANK_XXX) + * and this callback would be called proir to fb driver's callback. + * + * P.S. note that if early_set_power is not NULL then early fb notifier + * would be registered. + */ + int (*early_set_power)(struct lcd_device *, int power); + /* revert the effects of the early blank event. */ + int (*r_early_set_power)(struct lcd_device *, int power); + /* Enable or disable power to the LCD (0: on; 4: off, see FB_BLANK_XXX) */ + int (*set_power)(struct lcd_device *, int power); + /* Get the current contrast setting (0-max_contrast) */ + int (*get_contrast)(struct lcd_device *); + /* Set LCD panel contrast */ + int (*set_contrast)(struct lcd_device *, int contrast); + /* Set LCD panel mode (resolutions ...) */ + int (*set_mode)(struct lcd_device *, struct fb_videomode *); + /* Check if given framebuffer device is the one LCD is bound to; + return 0 if not, !=0 if it is. If NULL, lcd always matches the fb. */ + int (*check_fb)(struct lcd_device *, struct fb_info *); +}; + +struct lcd_device { + struct lcd_properties props; + /* This protects the 'ops' field. If 'ops' is NULL, the driver that + registered this device has been unloaded, and if class_get_devdata() + points to something in the body of that driver, it is also invalid. */ + struct mutex ops_lock; + /* If this is NULL, the backing module is unloaded */ + struct lcd_ops *ops; + /* Serialise access to set_power method */ + struct mutex update_lock; + /* The framebuffer notifier block */ + struct notifier_block fb_notif; + + struct device dev; +}; + +struct lcd_platform_data { + /* reset lcd panel device. */ + int (*reset)(struct lcd_device *ld); + /* on or off to lcd panel. if 'enable' is 0 then + lcd power off and 1, lcd power on. */ + int (*power_on)(struct lcd_device *ld, int enable); + + /* it indicates whether lcd panel was enabled + from bootloader or not. */ + int lcd_enabled; + /* it means delay for stable time when it becomes low to high + or high to low that is dependent on whether reset gpio is + low active or high active. */ + unsigned int reset_delay; + /* stable time needing to become lcd power on. */ + unsigned int power_on_delay; + /* stable time needing to become lcd power off. */ + unsigned int power_off_delay; + + /* it could be used for any purpose. */ + void *pdata; +}; + +static inline void lcd_set_power(struct lcd_device *ld, int power) +{ + mutex_lock(&ld->update_lock); + if (ld->ops && ld->ops->set_power) + ld->ops->set_power(ld, power); + mutex_unlock(&ld->update_lock); +} + +extern struct lcd_device *lcd_device_register(const char *name, + struct device *parent, void *devdata, struct lcd_ops *ops); +extern struct lcd_device *devm_lcd_device_register(struct device *dev, + const char *name, struct device *parent, + void *devdata, struct lcd_ops *ops); +extern void lcd_device_unregister(struct lcd_device *ld); +extern void devm_lcd_device_unregister(struct device *dev, + struct lcd_device *ld); + +#define to_lcd_device(obj) container_of(obj, struct lcd_device, dev) + +static inline void * lcd_get_data(struct lcd_device *ld_dev) +{ + return dev_get_drvdata(&ld_dev->dev); +} + + +#endif -- cgit v1.2.3-54-g00ecf