From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- include/linux/mmc/host.h | 516 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 516 insertions(+) create mode 100644 include/linux/mmc/host.h (limited to 'include/linux/mmc/host.h') diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h new file mode 100644 index 000000000..b5bedaec6 --- /dev/null +++ b/include/linux/mmc/host.h @@ -0,0 +1,516 @@ +/* + * linux/include/linux/mmc/host.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Host driver specific definitions. + */ +#ifndef LINUX_MMC_HOST_H +#define LINUX_MMC_HOST_H + +#include +#include +#include +#include +#include + +#include +#include +#include + +struct mmc_ios { + unsigned int clock; /* clock rate */ + unsigned short vdd; + +/* vdd stores the bit number of the selected voltage range from below. */ + + unsigned char bus_mode; /* command output mode */ + +#define MMC_BUSMODE_OPENDRAIN 1 +#define MMC_BUSMODE_PUSHPULL 2 + + unsigned char chip_select; /* SPI chip select */ + +#define MMC_CS_DONTCARE 0 +#define MMC_CS_HIGH 1 +#define MMC_CS_LOW 2 + + unsigned char power_mode; /* power supply mode */ + +#define MMC_POWER_OFF 0 +#define MMC_POWER_UP 1 +#define MMC_POWER_ON 2 +#define MMC_POWER_UNDEFINED 3 + + unsigned char bus_width; /* data bus width */ + +#define MMC_BUS_WIDTH_1 0 +#define MMC_BUS_WIDTH_4 2 +#define MMC_BUS_WIDTH_8 3 + + unsigned char timing; /* timing specification used */ + +#define MMC_TIMING_LEGACY 0 +#define MMC_TIMING_MMC_HS 1 +#define MMC_TIMING_SD_HS 2 +#define MMC_TIMING_UHS_SDR12 3 +#define MMC_TIMING_UHS_SDR25 4 +#define MMC_TIMING_UHS_SDR50 5 +#define MMC_TIMING_UHS_SDR104 6 +#define MMC_TIMING_UHS_DDR50 7 +#define MMC_TIMING_MMC_DDR52 8 +#define MMC_TIMING_MMC_HS200 9 +#define MMC_TIMING_MMC_HS400 10 + + unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */ + +#define MMC_SIGNAL_VOLTAGE_330 0 +#define MMC_SIGNAL_VOLTAGE_180 1 +#define MMC_SIGNAL_VOLTAGE_120 2 + + unsigned char drv_type; /* driver type (A, B, C, D) */ + +#define MMC_SET_DRIVER_TYPE_B 0 +#define MMC_SET_DRIVER_TYPE_A 1 +#define MMC_SET_DRIVER_TYPE_C 2 +#define MMC_SET_DRIVER_TYPE_D 3 +}; + +struct mmc_host_ops { + /* + * It is optional for the host to implement pre_req and post_req in + * order to support double buffering of requests (prepare one + * request while another request is active). + * pre_req() must always be followed by a post_req(). + * To undo a call made to pre_req(), call post_req() with + * a nonzero err condition. + */ + void (*post_req)(struct mmc_host *host, struct mmc_request *req, + int err); + void (*pre_req)(struct mmc_host *host, struct mmc_request *req, + bool is_first_req); + void (*request)(struct mmc_host *host, struct mmc_request *req); + /* + * Avoid calling these three functions too often or in a "fast path", + * since underlaying controller might implement them in an expensive + * and/or slow way. + * + * Also note that these functions might sleep, so don't call them + * in the atomic contexts! + * + * Return values for the get_ro callback should be: + * 0 for a read/write card + * 1 for a read-only card + * -ENOSYS when not supported (equal to NULL callback) + * or a negative errno value when something bad happened + * + * Return values for the get_cd callback should be: + * 0 for a absent card + * 1 for a present card + * -ENOSYS when not supported (equal to NULL callback) + * or a negative errno value when something bad happened + */ + void (*set_ios)(struct mmc_host *host, struct mmc_ios *ios); + int (*get_ro)(struct mmc_host *host); + int (*get_cd)(struct mmc_host *host); + + void (*enable_sdio_irq)(struct mmc_host *host, int enable); + + /* optional callback for HC quirks */ + void (*init_card)(struct mmc_host *host, struct mmc_card *card); + + int (*start_signal_voltage_switch)(struct mmc_host *host, struct mmc_ios *ios); + + /* Check if the card is pulling dat[0:3] low */ + int (*card_busy)(struct mmc_host *host); + + /* The tuning command opcode value is different for SD and eMMC cards */ + int (*execute_tuning)(struct mmc_host *host, u32 opcode); + + /* Prepare HS400 target operating frequency depending host driver */ + int (*prepare_hs400_tuning)(struct mmc_host *host, struct mmc_ios *ios); + int (*select_drive_strength)(unsigned int max_dtr, int host_drv, int card_drv); + void (*hw_reset)(struct mmc_host *host); + void (*card_event)(struct mmc_host *host); + + /* + * Optional callback to support controllers with HW issues for multiple + * I/O. Returns the number of supported blocks for the request. + */ + int (*multi_io_quirk)(struct mmc_card *card, + unsigned int direction, int blk_size); +}; + +struct mmc_card; +struct device; + +struct mmc_async_req { + /* active mmc request */ + struct mmc_request *mrq; + /* + * Check error status of completed mmc request. + * Returns 0 if success otherwise non zero. + */ + int (*err_check) (struct mmc_card *, struct mmc_async_req *); +}; + +/** + * struct mmc_slot - MMC slot functions + * + * @cd_irq: MMC/SD-card slot hotplug detection IRQ or -EINVAL + * @handler_priv: MMC/SD-card slot context + * + * Some MMC/SD host controllers implement slot-functions like card and + * write-protect detection natively. However, a large number of controllers + * leave these functions to the CPU. This struct provides a hook to attach + * such slot-function drivers. + */ +struct mmc_slot { + int cd_irq; + void *handler_priv; +}; + +/** + * mmc_context_info - synchronization details for mmc context + * @is_done_rcv wake up reason was done request + * @is_new_req wake up reason was new request + * @is_waiting_last_req mmc context waiting for single running request + * @wait wait queue + * @lock lock to protect data fields + */ +struct mmc_context_info { + bool is_done_rcv; + bool is_new_req; + bool is_waiting_last_req; + wait_queue_head_t wait; + spinlock_t lock; +}; + +struct regulator; +struct mmc_pwrseq; + +struct mmc_supply { + struct regulator *vmmc; /* Card power supply */ + struct regulator *vqmmc; /* Optional Vccq supply */ +}; + +struct mmc_host { + struct device *parent; + struct device class_dev; + int index; + const struct mmc_host_ops *ops; + struct mmc_pwrseq *pwrseq; + unsigned int f_min; + unsigned int f_max; + unsigned int f_init; + u32 ocr_avail; + u32 ocr_avail_sdio; /* SDIO-specific OCR */ + u32 ocr_avail_sd; /* SD-specific OCR */ + u32 ocr_avail_mmc; /* MMC-specific OCR */ + struct notifier_block pm_notify; + u32 max_current_330; + u32 max_current_300; + u32 max_current_180; + +#define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */ +#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */ +#define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */ +#define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */ +#define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */ +#define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */ +#define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */ +#define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */ +#define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */ +#define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */ +#define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */ +#define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */ +#define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */ +#define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */ +#define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */ +#define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */ +#define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */ + + u32 caps; /* Host capabilities */ + +#define MMC_CAP_4_BIT_DATA (1 << 0) /* Can the host do 4 bit transfers */ +#define MMC_CAP_MMC_HIGHSPEED (1 << 1) /* Can do MMC high-speed timing */ +#define MMC_CAP_SD_HIGHSPEED (1 << 2) /* Can do SD high-speed timing */ +#define MMC_CAP_SDIO_IRQ (1 << 3) /* Can signal pending SDIO IRQs */ +#define MMC_CAP_SPI (1 << 4) /* Talks only SPI protocols */ +#define MMC_CAP_NEEDS_POLL (1 << 5) /* Needs polling for card-detection */ +#define MMC_CAP_8_BIT_DATA (1 << 6) /* Can the host do 8 bit transfers */ +#define MMC_CAP_AGGRESSIVE_PM (1 << 7) /* Suspend (e)MMC/SD at idle */ +#define MMC_CAP_NONREMOVABLE (1 << 8) /* Nonremovable e.g. eMMC */ +#define MMC_CAP_WAIT_WHILE_BUSY (1 << 9) /* Waits while card is busy */ +#define MMC_CAP_ERASE (1 << 10) /* Allow erase/trim commands */ +#define MMC_CAP_1_8V_DDR (1 << 11) /* can support */ + /* DDR mode at 1.8V */ +#define MMC_CAP_1_2V_DDR (1 << 12) /* can support */ + /* DDR mode at 1.2V */ +#define MMC_CAP_POWER_OFF_CARD (1 << 13) /* Can power off after boot */ +#define MMC_CAP_BUS_WIDTH_TEST (1 << 14) /* CMD14/CMD19 bus width ok */ +#define MMC_CAP_UHS_SDR12 (1 << 15) /* Host supports UHS SDR12 mode */ +#define MMC_CAP_UHS_SDR25 (1 << 16) /* Host supports UHS SDR25 mode */ +#define MMC_CAP_UHS_SDR50 (1 << 17) /* Host supports UHS SDR50 mode */ +#define MMC_CAP_UHS_SDR104 (1 << 18) /* Host supports UHS SDR104 mode */ +#define MMC_CAP_UHS_DDR50 (1 << 19) /* Host supports UHS DDR50 mode */ +#define MMC_CAP_RUNTIME_RESUME (1 << 20) /* Resume at runtime_resume. */ +#define MMC_CAP_DRIVER_TYPE_A (1 << 23) /* Host supports Driver Type A */ +#define MMC_CAP_DRIVER_TYPE_C (1 << 24) /* Host supports Driver Type C */ +#define MMC_CAP_DRIVER_TYPE_D (1 << 25) /* Host supports Driver Type D */ +#define MMC_CAP_CMD23 (1 << 30) /* CMD23 supported. */ +#define MMC_CAP_HW_RESET (1 << 31) /* Hardware reset */ + + u32 caps2; /* More host capabilities */ + +#define MMC_CAP2_BOOTPART_NOACC (1 << 0) /* Boot partition no access */ +#define MMC_CAP2_FULL_PWR_CYCLE (1 << 2) /* Can do full power cycle */ +#define MMC_CAP2_HS200_1_8V_SDR (1 << 5) /* can support */ +#define MMC_CAP2_HS200_1_2V_SDR (1 << 6) /* can support */ +#define MMC_CAP2_HS200 (MMC_CAP2_HS200_1_8V_SDR | \ + MMC_CAP2_HS200_1_2V_SDR) +#define MMC_CAP2_HC_ERASE_SZ (1 << 9) /* High-capacity erase size */ +#define MMC_CAP2_CD_ACTIVE_HIGH (1 << 10) /* Card-detect signal active high */ +#define MMC_CAP2_RO_ACTIVE_HIGH (1 << 11) /* Write-protect signal active high */ +#define MMC_CAP2_PACKED_RD (1 << 12) /* Allow packed read */ +#define MMC_CAP2_PACKED_WR (1 << 13) /* Allow packed write */ +#define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \ + MMC_CAP2_PACKED_WR) +#define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14) /* Don't power up before scan */ +#define MMC_CAP2_HS400_1_8V (1 << 15) /* Can support HS400 1.8V */ +#define MMC_CAP2_HS400_1_2V (1 << 16) /* Can support HS400 1.2V */ +#define MMC_CAP2_HS400 (MMC_CAP2_HS400_1_8V | \ + MMC_CAP2_HS400_1_2V) +#define MMC_CAP2_HSX00_1_2V (MMC_CAP2_HS200_1_2V_SDR | MMC_CAP2_HS400_1_2V) +#define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17) + + mmc_pm_flag_t pm_caps; /* supported pm features */ + +#ifdef CONFIG_MMC_CLKGATE + int clk_requests; /* internal reference counter */ + unsigned int clk_delay; /* number of MCI clk hold cycles */ + bool clk_gated; /* clock gated */ + struct delayed_work clk_gate_work; /* delayed clock gate */ + unsigned int clk_old; /* old clock value cache */ + spinlock_t clk_lock; /* lock for clk fields */ + struct mutex clk_gate_mutex; /* mutex for clock gating */ + struct device_attribute clkgate_delay_attr; + unsigned long clkgate_delay; +#endif + + /* host specific block data */ + unsigned int max_seg_size; /* see blk_queue_max_segment_size */ + unsigned short max_segs; /* see blk_queue_max_segments */ + unsigned short unused; + unsigned int max_req_size; /* maximum number of bytes in one req */ + unsigned int max_blk_size; /* maximum size of one mmc block */ + unsigned int max_blk_count; /* maximum number of blocks in one req */ + unsigned int max_busy_timeout; /* max busy timeout in ms */ + + /* private data */ + spinlock_t lock; /* lock for claim and bus ops */ + + struct mmc_ios ios; /* current io bus settings */ + + /* group bitfields together to minimize padding */ + unsigned int use_spi_crc:1; + unsigned int claimed:1; /* host exclusively claimed */ + unsigned int bus_dead:1; /* bus has been released */ +#ifdef CONFIG_MMC_DEBUG + unsigned int removed:1; /* host is being removed */ +#endif + + int rescan_disable; /* disable card detection */ + int rescan_entered; /* used with nonremovable devices */ + + bool trigger_card_event; /* card_event necessary */ + + struct mmc_card *card; /* device attached to this host */ + + wait_queue_head_t wq; + struct task_struct *claimer; /* task that has host claimed */ + int claim_cnt; /* "claim" nesting count */ + + struct delayed_work detect; + int detect_change; /* card detect flag */ + struct mmc_slot slot; + + const struct mmc_bus_ops *bus_ops; /* current bus driver */ + unsigned int bus_refs; /* reference counter */ + + unsigned int sdio_irqs; + struct task_struct *sdio_irq_thread; + bool sdio_irq_pending; + atomic_t sdio_irq_thread_abort; + + mmc_pm_flag_t pm_flags; /* requested pm features */ + + struct led_trigger *led; /* activity led */ + +#ifdef CONFIG_REGULATOR + bool regulator_enabled; /* regulator state */ +#endif + struct mmc_supply supply; + + struct dentry *debugfs_root; + + struct mmc_async_req *areq; /* active async req */ + struct mmc_context_info context_info; /* async synchronization info */ + +#ifdef CONFIG_FAIL_MMC_REQUEST + struct fault_attr fail_mmc_request; +#endif + + unsigned int actual_clock; /* Actual HC clock rate */ + + unsigned int slotno; /* used for sdio acpi binding */ + + int dsr_req; /* DSR value is valid */ + u32 dsr; /* optional driver stage (DSR) value */ + + unsigned long private[0] ____cacheline_aligned; +}; + +struct mmc_host *mmc_alloc_host(int extra, struct device *); +int mmc_add_host(struct mmc_host *); +void mmc_remove_host(struct mmc_host *); +void mmc_free_host(struct mmc_host *); +int mmc_of_parse(struct mmc_host *host); + +static inline void *mmc_priv(struct mmc_host *host) +{ + return (void *)host->private; +} + +#define mmc_host_is_spi(host) ((host)->caps & MMC_CAP_SPI) + +#define mmc_dev(x) ((x)->parent) +#define mmc_classdev(x) (&(x)->class_dev) +#define mmc_hostname(x) (dev_name(&(x)->class_dev)) + +int mmc_power_save_host(struct mmc_host *host); +int mmc_power_restore_host(struct mmc_host *host); + +void mmc_detect_change(struct mmc_host *, unsigned long delay); +void mmc_request_done(struct mmc_host *, struct mmc_request *); + +static inline void mmc_signal_sdio_irq(struct mmc_host *host) +{ + host->ops->enable_sdio_irq(host, 0); + host->sdio_irq_pending = true; + wake_up_process(host->sdio_irq_thread); +} + +void sdio_run_irqs(struct mmc_host *host); + +#ifdef CONFIG_REGULATOR +int mmc_regulator_get_ocrmask(struct regulator *supply); +int mmc_regulator_set_ocr(struct mmc_host *mmc, + struct regulator *supply, + unsigned short vdd_bit); +#else +static inline int mmc_regulator_get_ocrmask(struct regulator *supply) +{ + return 0; +} + +static inline int mmc_regulator_set_ocr(struct mmc_host *mmc, + struct regulator *supply, + unsigned short vdd_bit) +{ + return 0; +} +#endif + +int mmc_regulator_get_supply(struct mmc_host *mmc); + +int mmc_pm_notify(struct notifier_block *notify_block, unsigned long, void *); + +static inline int mmc_card_is_removable(struct mmc_host *host) +{ + return !(host->caps & MMC_CAP_NONREMOVABLE); +} + +static inline int mmc_card_keep_power(struct mmc_host *host) +{ + return host->pm_flags & MMC_PM_KEEP_POWER; +} + +static inline int mmc_card_wake_sdio_irq(struct mmc_host *host) +{ + return host->pm_flags & MMC_PM_WAKE_SDIO_IRQ; +} + +static inline int mmc_host_cmd23(struct mmc_host *host) +{ + return host->caps & MMC_CAP_CMD23; +} + +static inline int mmc_boot_partition_access(struct mmc_host *host) +{ + return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC); +} + +static inline int mmc_host_uhs(struct mmc_host *host) +{ + return host->caps & + (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | + MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | + MMC_CAP_UHS_DDR50); +} + +static inline int mmc_host_packed_wr(struct mmc_host *host) +{ + return host->caps2 & MMC_CAP2_PACKED_WR; +} + +#ifdef CONFIG_MMC_CLKGATE +void mmc_host_clk_hold(struct mmc_host *host); +void mmc_host_clk_release(struct mmc_host *host); +unsigned int mmc_host_clk_rate(struct mmc_host *host); + +#else +static inline void mmc_host_clk_hold(struct mmc_host *host) +{ +} + +static inline void mmc_host_clk_release(struct mmc_host *host) +{ +} + +static inline unsigned int mmc_host_clk_rate(struct mmc_host *host) +{ + return host->ios.clock; +} +#endif + +static inline int mmc_card_hs(struct mmc_card *card) +{ + return card->host->ios.timing == MMC_TIMING_SD_HS || + card->host->ios.timing == MMC_TIMING_MMC_HS; +} + +static inline int mmc_card_uhs(struct mmc_card *card) +{ + return card->host->ios.timing >= MMC_TIMING_UHS_SDR12 && + card->host->ios.timing <= MMC_TIMING_UHS_DDR50; +} + +static inline bool mmc_card_hs200(struct mmc_card *card) +{ + return card->host->ios.timing == MMC_TIMING_MMC_HS200; +} + +static inline bool mmc_card_ddr52(struct mmc_card *card) +{ + return card->host->ios.timing == MMC_TIMING_MMC_DDR52; +} + +static inline bool mmc_card_hs400(struct mmc_card *card) +{ + return card->host->ios.timing == MMC_TIMING_MMC_HS400; +} + +#endif /* LINUX_MMC_HOST_H */ -- cgit v1.2.3-54-g00ecf