From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- include/linux/mmc/sd.h | 94 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 94 insertions(+) create mode 100644 include/linux/mmc/sd.h (limited to 'include/linux/mmc/sd.h') diff --git a/include/linux/mmc/sd.h b/include/linux/mmc/sd.h new file mode 100644 index 000000000..1ebcf9ba1 --- /dev/null +++ b/include/linux/mmc/sd.h @@ -0,0 +1,94 @@ +/* + * include/linux/mmc/sd.h + * + * Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#ifndef LINUX_MMC_SD_H +#define LINUX_MMC_SD_H + +/* SD commands type argument response */ + /* class 0 */ +/* This is basically the same command as for MMC with some quirks. */ +#define SD_SEND_RELATIVE_ADDR 3 /* bcr R6 */ +#define SD_SEND_IF_COND 8 /* bcr [11:0] See below R7 */ +#define SD_SWITCH_VOLTAGE 11 /* ac R1 */ + + /* class 10 */ +#define SD_SWITCH 6 /* adtc [31:0] See below R1 */ + + /* class 5 */ +#define SD_ERASE_WR_BLK_START 32 /* ac [31:0] data addr R1 */ +#define SD_ERASE_WR_BLK_END 33 /* ac [31:0] data addr R1 */ + + /* Application commands */ +#define SD_APP_SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */ +#define SD_APP_SD_STATUS 13 /* adtc R1 */ +#define SD_APP_SEND_NUM_WR_BLKS 22 /* adtc R1 */ +#define SD_APP_OP_COND 41 /* bcr [31:0] OCR R3 */ +#define SD_APP_SEND_SCR 51 /* adtc R1 */ + +/* OCR bit definitions */ +#define SD_OCR_S18R (1 << 24) /* 1.8V switching request */ +#define SD_ROCR_S18A SD_OCR_S18R /* 1.8V switching accepted by card */ +#define SD_OCR_XPC (1 << 28) /* SDXC power control */ +#define SD_OCR_CCS (1 << 30) /* Card Capacity Status */ + +/* + * SD_SWITCH argument format: + * + * [31] Check (0) or switch (1) + * [30:24] Reserved (0) + * [23:20] Function group 6 + * [19:16] Function group 5 + * [15:12] Function group 4 + * [11:8] Function group 3 + * [7:4] Function group 2 + * [3:0] Function group 1 + */ + +/* + * SD_SEND_IF_COND argument format: + * + * [31:12] Reserved (0) + * [11:8] Host Voltage Supply Flags + * [7:0] Check Pattern (0xAA) + */ + +/* + * SCR field definitions + */ + +#define SCR_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.01 */ +#define SCR_SPEC_VER_1 1 /* Implements system specification 1.10 */ +#define SCR_SPEC_VER_2 2 /* Implements system specification 2.00-3.0X */ + +/* + * SD bus widths + */ +#define SD_BUS_WIDTH_1 0 +#define SD_BUS_WIDTH_4 2 + +/* + * SD_SWITCH mode + */ +#define SD_SWITCH_CHECK 0 +#define SD_SWITCH_SET 1 + +/* + * SD_SWITCH function groups + */ +#define SD_SWITCH_GRP_ACCESS 0 + +/* + * SD_SWITCH access modes + */ +#define SD_SWITCH_ACCESS_DEF 0 +#define SD_SWITCH_ACCESS_HS 1 + +#endif /* LINUX_MMC_SD_H */ -- cgit v1.2.3-54-g00ecf