From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andr=C3=A9=20Fabian=20Silva=20Delgado?= Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- include/linux/nsc_gpio.h | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 include/linux/nsc_gpio.h (limited to 'include/linux/nsc_gpio.h') diff --git a/include/linux/nsc_gpio.h b/include/linux/nsc_gpio.h new file mode 100644 index 000000000..7da0cf370 --- /dev/null +++ b/include/linux/nsc_gpio.h @@ -0,0 +1,40 @@ +/** + nsc_gpio.c + + National Semiconductor GPIO common access methods. + + struct nsc_gpio_ops abstracts the low-level access + operations for the GPIO units on 2 NSC chip families; the GEODE + integrated CPU, and the PC-8736[03456] integrated PC-peripheral + chips. + + The GPIO units on these chips have the same pin architecture, but + the access methods differ. Thus, scx200_gpio and pc8736x_gpio + implement their own versions of these routines; and use the common + file-operations routines implemented in nsc_gpio module. + + Copyright (c) 2005 Jim Cromie + + NB: this work was tested on the Geode SC-1100 and PC-87366 chips. + NSC sold the GEODE line to AMD, and the PC-8736x line to Winbond. +*/ + +struct nsc_gpio_ops { + struct module* owner; + u32 (*gpio_config) (unsigned iminor, u32 mask, u32 bits); + void (*gpio_dump) (struct nsc_gpio_ops *amp, unsigned iminor); + int (*gpio_get) (unsigned iminor); + void (*gpio_set) (unsigned iminor, int state); + void (*gpio_change) (unsigned iminor); + int (*gpio_current) (unsigned iminor); + struct device* dev; /* for dev_dbg() support, set in init */ +}; + +extern ssize_t nsc_gpio_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos); + +extern ssize_t nsc_gpio_read(struct file *file, char __user *buf, + size_t len, loff_t *ppos); + +extern void nsc_gpio_dump(struct nsc_gpio_ops *amp, unsigned index); + -- cgit v1.2.3