From b4b7ff4b08e691656c9d77c758fc355833128ac0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 20 Jan 2016 14:01:31 -0300 Subject: Linux-libre 4.4-gnu --- include/linux/qed/qed_if.h | 498 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 498 insertions(+) create mode 100644 include/linux/qed/qed_if.h (limited to 'include/linux/qed/qed_if.h') diff --git a/include/linux/qed/qed_if.h b/include/linux/qed/qed_if.h new file mode 100644 index 000000000..dc9a1353f --- /dev/null +++ b/include/linux/qed/qed_if.h @@ -0,0 +1,498 @@ +/* QLogic qed NIC Driver + * + * Copyright (c) 2015 QLogic Corporation + * + * This software is available under the terms of the GNU General Public License + * (GPL) Version 2, available from the file COPYING in the main directory of + * this source tree. + */ + +#ifndef _QED_IF_H +#define _QED_IF_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DIRECT_REG_WR(reg_addr, val) writel((u32)val, \ + (void __iomem *)(reg_addr)) + +#define DIRECT_REG_RD(reg_addr) readl((void __iomem *)(reg_addr)) + +#define QED_COALESCE_MAX 0xFF + +/* forward */ +struct qed_dev; + +struct qed_eth_pf_params { + /* The following parameters are used during HW-init + * and these parameters need to be passed as arguments + * to update_pf_params routine invoked before slowpath start + */ + u16 num_cons; +}; + +struct qed_pf_params { + struct qed_eth_pf_params eth_pf_params; +}; + +enum qed_int_mode { + QED_INT_MODE_INTA, + QED_INT_MODE_MSIX, + QED_INT_MODE_MSI, + QED_INT_MODE_POLL, +}; + +struct qed_sb_info { + struct status_block *sb_virt; + dma_addr_t sb_phys; + u32 sb_ack; /* Last given ack */ + u16 igu_sb_id; + void __iomem *igu_addr; + u8 flags; +#define QED_SB_INFO_INIT 0x1 +#define QED_SB_INFO_SETUP 0x2 + + struct qed_dev *cdev; +}; + +struct qed_dev_info { + unsigned long pci_mem_start; + unsigned long pci_mem_end; + unsigned int pci_irq; + u8 num_hwfns; + + u8 hw_mac[ETH_ALEN]; + bool is_mf; + + /* FW version */ + u16 fw_major; + u16 fw_minor; + u16 fw_rev; + u16 fw_eng; + + /* MFW version */ + u32 mfw_rev; + + u32 flash_size; + u8 mf_mode; +}; + +enum qed_sb_type { + QED_SB_TYPE_L2_QUEUE, +}; + +enum qed_protocol { + QED_PROTOCOL_ETH, +}; + +struct qed_link_params { + bool link_up; + +#define QED_LINK_OVERRIDE_SPEED_AUTONEG BIT(0) +#define QED_LINK_OVERRIDE_SPEED_ADV_SPEEDS BIT(1) +#define QED_LINK_OVERRIDE_SPEED_FORCED_SPEED BIT(2) +#define QED_LINK_OVERRIDE_PAUSE_CONFIG BIT(3) + u32 override_flags; + bool autoneg; + u32 adv_speeds; + u32 forced_speed; +#define QED_LINK_PAUSE_AUTONEG_ENABLE BIT(0) +#define QED_LINK_PAUSE_RX_ENABLE BIT(1) +#define QED_LINK_PAUSE_TX_ENABLE BIT(2) + u32 pause_config; +}; + +struct qed_link_output { + bool link_up; + + u32 supported_caps; /* In SUPPORTED defs */ + u32 advertised_caps; /* In ADVERTISED defs */ + u32 lp_caps; /* In ADVERTISED defs */ + u32 speed; /* In Mb/s */ + u8 duplex; /* In DUPLEX defs */ + u8 port; /* In PORT defs */ + bool autoneg; + u32 pause_config; +}; + +#define QED_DRV_VER_STR_SIZE 12 +struct qed_slowpath_params { + u32 int_mode; + u8 drv_major; + u8 drv_minor; + u8 drv_rev; + u8 drv_eng; + u8 name[QED_DRV_VER_STR_SIZE]; +}; + +#define ILT_PAGE_SIZE_TCFC 0x8000 /* 32KB */ + +struct qed_int_info { + struct msix_entry *msix; + u8 msix_cnt; + + /* This should be updated by the protocol driver */ + u8 used_cnt; +}; + +struct qed_common_cb_ops { + void (*link_update)(void *dev, + struct qed_link_output *link); +}; + +struct qed_common_ops { + struct qed_dev* (*probe)(struct pci_dev *dev, + enum qed_protocol protocol, + u32 dp_module, u8 dp_level); + + void (*remove)(struct qed_dev *cdev); + + int (*set_power_state)(struct qed_dev *cdev, + pci_power_t state); + + void (*set_id)(struct qed_dev *cdev, + char name[], + char ver_str[]); + + /* Client drivers need to make this call before slowpath_start. + * PF params required for the call before slowpath_start is + * documented within the qed_pf_params structure definition. + */ + void (*update_pf_params)(struct qed_dev *cdev, + struct qed_pf_params *params); + int (*slowpath_start)(struct qed_dev *cdev, + struct qed_slowpath_params *params); + + int (*slowpath_stop)(struct qed_dev *cdev); + + /* Requests to use `cnt' interrupts for fastpath. + * upon success, returns number of interrupts allocated for fastpath. + */ + int (*set_fp_int)(struct qed_dev *cdev, + u16 cnt); + + /* Fills `info' with pointers required for utilizing interrupts */ + int (*get_fp_int)(struct qed_dev *cdev, + struct qed_int_info *info); + + u32 (*sb_init)(struct qed_dev *cdev, + struct qed_sb_info *sb_info, + void *sb_virt_addr, + dma_addr_t sb_phy_addr, + u16 sb_id, + enum qed_sb_type type); + + u32 (*sb_release)(struct qed_dev *cdev, + struct qed_sb_info *sb_info, + u16 sb_id); + + void (*simd_handler_config)(struct qed_dev *cdev, + void *token, + int index, + void (*handler)(void *)); + + void (*simd_handler_clean)(struct qed_dev *cdev, + int index); +/** + * @brief set_link - set links according to params + * + * @param cdev + * @param params - values used to override the default link configuration + * + * @return 0 on success, error otherwise. + */ + int (*set_link)(struct qed_dev *cdev, + struct qed_link_params *params); + +/** + * @brief get_link - returns the current link state. + * + * @param cdev + * @param if_link - structure to be filled with current link configuration. + */ + void (*get_link)(struct qed_dev *cdev, + struct qed_link_output *if_link); + +/** + * @brief - drains chip in case Tx completions fail to arrive due to pause. + * + * @param cdev + */ + int (*drain)(struct qed_dev *cdev); + +/** + * @brief update_msglvl - update module debug level + * + * @param cdev + * @param dp_module + * @param dp_level + */ + void (*update_msglvl)(struct qed_dev *cdev, + u32 dp_module, + u8 dp_level); + + int (*chain_alloc)(struct qed_dev *cdev, + enum qed_chain_use_mode intended_use, + enum qed_chain_mode mode, + u16 num_elems, + size_t elem_size, + struct qed_chain *p_chain); + + void (*chain_free)(struct qed_dev *cdev, + struct qed_chain *p_chain); +}; + +/** + * @brief qed_get_protocol_version + * + * @param protocol + * + * @return version supported by qed for given protocol driver + */ +u32 qed_get_protocol_version(enum qed_protocol protocol); + +#define MASK_FIELD(_name, _value) \ + ((_value) &= (_name ## _MASK)) + +#define FIELD_VALUE(_name, _value) \ + ((_value & _name ## _MASK) << _name ## _SHIFT) + +#define SET_FIELD(value, name, flag) \ + do { \ + (value) &= ~(name ## _MASK << name ## _SHIFT); \ + (value) |= (((u64)flag) << (name ## _SHIFT)); \ + } while (0) + +#define GET_FIELD(value, name) \ + (((value) >> (name ## _SHIFT)) & name ## _MASK) + +/* Debug print definitions */ +#define DP_ERR(cdev, fmt, ...) \ + pr_err("[%s:%d(%s)]" fmt, \ + __func__, __LINE__, \ + DP_NAME(cdev) ? DP_NAME(cdev) : "", \ + ## __VA_ARGS__) \ + +#define DP_NOTICE(cdev, fmt, ...) \ + do { \ + if (unlikely((cdev)->dp_level <= QED_LEVEL_NOTICE)) { \ + pr_notice("[%s:%d(%s)]" fmt, \ + __func__, __LINE__, \ + DP_NAME(cdev) ? DP_NAME(cdev) : "", \ + ## __VA_ARGS__); \ + \ + } \ + } while (0) + +#define DP_INFO(cdev, fmt, ...) \ + do { \ + if (unlikely((cdev)->dp_level <= QED_LEVEL_INFO)) { \ + pr_notice("[%s:%d(%s)]" fmt, \ + __func__, __LINE__, \ + DP_NAME(cdev) ? DP_NAME(cdev) : "", \ + ## __VA_ARGS__); \ + } \ + } while (0) + +#define DP_VERBOSE(cdev, module, fmt, ...) \ + do { \ + if (unlikely(((cdev)->dp_level <= QED_LEVEL_VERBOSE) && \ + ((cdev)->dp_module & module))) { \ + pr_notice("[%s:%d(%s)]" fmt, \ + __func__, __LINE__, \ + DP_NAME(cdev) ? DP_NAME(cdev) : "", \ + ## __VA_ARGS__); \ + } \ + } while (0) + +enum DP_LEVEL { + QED_LEVEL_VERBOSE = 0x0, + QED_LEVEL_INFO = 0x1, + QED_LEVEL_NOTICE = 0x2, + QED_LEVEL_ERR = 0x3, +}; + +#define QED_LOG_LEVEL_SHIFT (30) +#define QED_LOG_VERBOSE_MASK (0x3fffffff) +#define QED_LOG_INFO_MASK (0x40000000) +#define QED_LOG_NOTICE_MASK (0x80000000) + +enum DP_MODULE { + QED_MSG_SPQ = 0x10000, + QED_MSG_STATS = 0x20000, + QED_MSG_DCB = 0x40000, + QED_MSG_IOV = 0x80000, + QED_MSG_SP = 0x100000, + QED_MSG_STORAGE = 0x200000, + QED_MSG_CXT = 0x800000, + QED_MSG_ILT = 0x2000000, + QED_MSG_ROCE = 0x4000000, + QED_MSG_DEBUG = 0x8000000, + /* to be added...up to 0x8000000 */ +}; + +struct qed_eth_stats { + u64 no_buff_discards; + u64 packet_too_big_discard; + u64 ttl0_discard; + u64 rx_ucast_bytes; + u64 rx_mcast_bytes; + u64 rx_bcast_bytes; + u64 rx_ucast_pkts; + u64 rx_mcast_pkts; + u64 rx_bcast_pkts; + u64 mftag_filter_discards; + u64 mac_filter_discards; + u64 tx_ucast_bytes; + u64 tx_mcast_bytes; + u64 tx_bcast_bytes; + u64 tx_ucast_pkts; + u64 tx_mcast_pkts; + u64 tx_bcast_pkts; + u64 tx_err_drop_pkts; + u64 tpa_coalesced_pkts; + u64 tpa_coalesced_events; + u64 tpa_aborts_num; + u64 tpa_not_coalesced_pkts; + u64 tpa_coalesced_bytes; + + /* port */ + u64 rx_64_byte_packets; + u64 rx_127_byte_packets; + u64 rx_255_byte_packets; + u64 rx_511_byte_packets; + u64 rx_1023_byte_packets; + u64 rx_1518_byte_packets; + u64 rx_1522_byte_packets; + u64 rx_2047_byte_packets; + u64 rx_4095_byte_packets; + u64 rx_9216_byte_packets; + u64 rx_16383_byte_packets; + u64 rx_crc_errors; + u64 rx_mac_crtl_frames; + u64 rx_pause_frames; + u64 rx_pfc_frames; + u64 rx_align_errors; + u64 rx_carrier_errors; + u64 rx_oversize_packets; + u64 rx_jabbers; + u64 rx_undersize_packets; + u64 rx_fragments; + u64 tx_64_byte_packets; + u64 tx_65_to_127_byte_packets; + u64 tx_128_to_255_byte_packets; + u64 tx_256_to_511_byte_packets; + u64 tx_512_to_1023_byte_packets; + u64 tx_1024_to_1518_byte_packets; + u64 tx_1519_to_2047_byte_packets; + u64 tx_2048_to_4095_byte_packets; + u64 tx_4096_to_9216_byte_packets; + u64 tx_9217_to_16383_byte_packets; + u64 tx_pause_frames; + u64 tx_pfc_frames; + u64 tx_lpi_entry_count; + u64 tx_total_collisions; + u64 brb_truncates; + u64 brb_discards; + u64 rx_mac_bytes; + u64 rx_mac_uc_packets; + u64 rx_mac_mc_packets; + u64 rx_mac_bc_packets; + u64 rx_mac_frames_ok; + u64 tx_mac_bytes; + u64 tx_mac_uc_packets; + u64 tx_mac_mc_packets; + u64 tx_mac_bc_packets; + u64 tx_mac_ctrl_frames; +}; + +#define QED_SB_IDX 0x0002 + +#define RX_PI 0 +#define TX_PI(tc) (RX_PI + 1 + tc) + +static inline u16 qed_sb_update_sb_idx(struct qed_sb_info *sb_info) +{ + u32 prod = 0; + u16 rc = 0; + + prod = le32_to_cpu(sb_info->sb_virt->prod_index) & + STATUS_BLOCK_PROD_INDEX_MASK; + if (sb_info->sb_ack != prod) { + sb_info->sb_ack = prod; + rc |= QED_SB_IDX; + } + + /* Let SB update */ + mmiowb(); + return rc; +} + +/** + * + * @brief This function creates an update command for interrupts that is + * written to the IGU. + * + * @param sb_info - This is the structure allocated and + * initialized per status block. Assumption is + * that it was initialized using qed_sb_init + * @param int_cmd - Enable/Disable/Nop + * @param upd_flg - whether igu consumer should be + * updated. + * + * @return inline void + */ +static inline void qed_sb_ack(struct qed_sb_info *sb_info, + enum igu_int_cmd int_cmd, + u8 upd_flg) +{ + struct igu_prod_cons_update igu_ack = { 0 }; + + igu_ack.sb_id_and_flags = + ((sb_info->sb_ack << IGU_PROD_CONS_UPDATE_SB_INDEX_SHIFT) | + (upd_flg << IGU_PROD_CONS_UPDATE_UPDATE_FLAG_SHIFT) | + (int_cmd << IGU_PROD_CONS_UPDATE_ENABLE_INT_SHIFT) | + (IGU_SEG_ACCESS_REG << + IGU_PROD_CONS_UPDATE_SEGMENT_ACCESS_SHIFT)); + + DIRECT_REG_WR(sb_info->igu_addr, igu_ack.sb_id_and_flags); + + /* Both segments (interrupts & acks) are written to same place address; + * Need to guarantee all commands will be received (in-order) by HW. + */ + mmiowb(); + barrier(); +} + +static inline void __internal_ram_wr(void *p_hwfn, + void __iomem *addr, + int size, + u32 *data) + +{ + unsigned int i; + + for (i = 0; i < size / sizeof(*data); i++) + DIRECT_REG_WR(&((u32 __iomem *)addr)[i], data[i]); +} + +static inline void internal_ram_wr(void __iomem *addr, + int size, + u32 *data) +{ + __internal_ram_wr(NULL, addr, size, data); +} + +#endif -- cgit v1.2.3-54-g00ecf