From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- include/linux/ti_wilink_st.h | 452 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 452 insertions(+) create mode 100644 include/linux/ti_wilink_st.h (limited to 'include/linux/ti_wilink_st.h') diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h new file mode 100644 index 000000000..c78dcfeaf --- /dev/null +++ b/include/linux/ti_wilink_st.h @@ -0,0 +1,452 @@ +/* + * Shared Transport Header file + * To be included by the protocol stack drivers for + * Texas Instruments BT,FM and GPS combo chip drivers + * and also serves the sub-modules of the shared transport driver. + * + * Copyright (C) 2009-2010 Texas Instruments + * Author: Pavan Savoy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef TI_WILINK_ST_H +#define TI_WILINK_ST_H + +#include + +/** + * enum proto-type - The protocol on WiLink chips which share a + * common physical interface like UART. + */ +enum proto_type { + ST_BT, + ST_FM, + ST_GPS, + ST_MAX_CHANNELS = 16, +}; + +/** + * struct st_proto_s - Per Protocol structure from BT/FM/GPS to ST + * @type: type of the protocol being registered among the + * available proto_type(BT, FM, GPS the protocol which share TTY). + * @recv: the receiver callback pointing to a function in the + * protocol drivers called by the ST driver upon receiving + * relevant data. + * @match_packet: reserved for future use, to make ST more generic + * @reg_complete_cb: callback handler pointing to a function in protocol + * handler called by ST when the pending registrations are complete. + * The registrations are marked pending, in situations when fw + * download is in progress. + * @write: pointer to function in ST provided to protocol drivers from ST, + * to be made use when protocol drivers have data to send to TTY. + * @priv_data: privdate data holder for the protocol drivers, sent + * from the protocol drivers during registration, and sent back on + * reg_complete_cb and recv. + * @chnl_id: channel id the protocol driver is interested in, the channel + * id is nothing but the 1st byte of the packet in UART frame. + * @max_frame_size: size of the largest frame the protocol can receive. + * @hdr_len: length of the header structure of the protocol. + * @offset_len_in_hdr: this provides the offset of the length field in the + * header structure of the protocol header, to assist ST to know + * how much to receive, if the data is split across UART frames. + * @len_size: whether the length field inside the header is 2 bytes + * or 1 byte. + * @reserve: the number of bytes ST needs to reserve in the skb being + * prepared for the protocol driver. + */ +struct st_proto_s { + enum proto_type type; + long (*recv) (void *, struct sk_buff *); + unsigned char (*match_packet) (const unsigned char *data); + void (*reg_complete_cb) (void *, char data); + long (*write) (struct sk_buff *skb); + void *priv_data; + + unsigned char chnl_id; + unsigned short max_frame_size; + unsigned char hdr_len; + unsigned char offset_len_in_hdr; + unsigned char len_size; + unsigned char reserve; +}; + +extern long st_register(struct st_proto_s *); +extern long st_unregister(struct st_proto_s *); + +extern struct ti_st_plat_data *dt_pdata; + +/* + * header information used by st_core.c + */ + +/* states of protocol list */ +#define ST_NOTEMPTY 1 +#define ST_EMPTY 0 + +/* + * possible st_states + */ +#define ST_INITIALIZING 1 +#define ST_REG_IN_PROGRESS 2 +#define ST_REG_PENDING 3 +#define ST_WAITING_FOR_RESP 4 + +/** + * struct st_data_s - ST core internal structure + * @st_state: different states of ST like initializing, registration + * in progress, this is mainly used to return relevant err codes + * when protocol drivers are registering. It is also used to track + * the recv function, as in during fw download only HCI events + * can occur , where as during other times other events CH8, CH9 + * can occur. + * @tty: tty provided by the TTY core for line disciplines. + * @tx_skb: If for some reason the tty's write returns lesser bytes written + * then to maintain the rest of data to be written on next instance. + * This needs to be protected, hence the lock inside wakeup func. + * @tx_state: if the data is being written onto the TTY and protocol driver + * wants to send more, queue up data and mark that there is + * more data to send. + * @list: the list of protocols registered, only MAX can exist, one protocol + * can register only once. + * @rx_state: states to be maintained inside st's tty receive + * @rx_count: count to be maintained inside st's tty receieve + * @rx_skb: the skb where all data for a protocol gets accumulated, + * since tty might not call receive when a complete event packet + * is received, the states, count and the skb needs to be maintained. + * @rx_chnl: the channel ID for which the data is getting accumalated for. + * @txq: the list of skbs which needs to be sent onto the TTY. + * @tx_waitq: if the chip is not in AWAKE state, the skbs needs to be queued + * up in here, PM(WAKEUP_IND) data needs to be sent and then the skbs + * from waitq can be moved onto the txq. + * Needs locking too. + * @lock: the lock to protect skbs, queues, and ST states. + * @protos_registered: count of the protocols registered, also when 0 the + * chip enable gpio can be toggled, and when it changes to 1 the fw + * needs to be downloaded to initialize chip side ST. + * @ll_state: the various PM states the chip can be, the states are notified + * to us, when the chip sends relevant PM packets(SLEEP_IND, WAKE_IND). + * @kim_data: reference to the parent encapsulating structure. + * + */ +struct st_data_s { + unsigned long st_state; + struct sk_buff *tx_skb; +#define ST_TX_SENDING 1 +#define ST_TX_WAKEUP 2 + unsigned long tx_state; + struct st_proto_s *list[ST_MAX_CHANNELS]; + bool is_registered[ST_MAX_CHANNELS]; + unsigned long rx_state; + unsigned long rx_count; + struct sk_buff *rx_skb; + unsigned char rx_chnl; + struct sk_buff_head txq, tx_waitq; + spinlock_t lock; + unsigned char protos_registered; + unsigned long ll_state; + void *kim_data; + struct tty_struct *tty; +}; + +/* + * wrapper around tty->ops->write_room to check + * availability during firmware download + */ +int st_get_uart_wr_room(struct st_data_s *st_gdata); +/** + * st_int_write - + * point this to tty->driver->write or tty->ops->write + * depending upon the kernel version + */ +int st_int_write(struct st_data_s*, const unsigned char*, int); + +/** + * st_write - + * internal write function, passed onto protocol drivers + * via the write function ptr of protocol struct + */ +long st_write(struct sk_buff *); + +/* function to be called from ST-LL */ +void st_ll_send_frame(enum proto_type, struct sk_buff *); + +/* internal wake up function */ +void st_tx_wakeup(struct st_data_s *st_data); + +/* init, exit entry funcs called from KIM */ +int st_core_init(struct st_data_s **); +void st_core_exit(struct st_data_s *); + +/* ask for reference from KIM */ +void st_kim_ref(struct st_data_s **, int); + +#define GPS_STUB_TEST +#ifdef GPS_STUB_TEST +int gps_chrdrv_stub_write(const unsigned char*, int); +void gps_chrdrv_stub_init(void); +#endif + +/* + * header information used by st_kim.c + */ + +/* time in msec to wait for + * line discipline to be installed + */ +#define LDISC_TIME 1000 +#define CMD_RESP_TIME 800 +#define CMD_WR_TIME 5000 +#define MAKEWORD(a, b) ((unsigned short)(((unsigned char)(a)) \ + | ((unsigned short)((unsigned char)(b))) << 8)) + +#define GPIO_HIGH 1 +#define GPIO_LOW 0 + +/* the Power-On-Reset logic, requires to attempt + * to download firmware onto chip more than once + * since the self-test for chip takes a while + */ +#define POR_RETRY_COUNT 5 + +/** + * struct chip_version - save the chip version + */ +struct chip_version { + unsigned short full; + unsigned short chip; + unsigned short min_ver; + unsigned short maj_ver; +}; + +#define UART_DEV_NAME_LEN 32 +/** + * struct kim_data_s - the KIM internal data, embedded as the + * platform's drv data. One for each ST device in the system. + * @uim_pid: KIM needs to communicate with UIM to request to install + * the ldisc by opening UART when protocol drivers register. + * @kim_pdev: the platform device added in one of the board-XX.c file + * in arch/XX/ directory, 1 for each ST device. + * @kim_rcvd: completion handler to notify when data was received, + * mainly used during fw download, which involves multiple send/wait + * for each of the HCI-VS commands. + * @ldisc_installed: completion handler to notify that the UIM accepted + * the request to install ldisc, notify from tty_open which suggests + * the ldisc was properly installed. + * @resp_buffer: data buffer for the .bts fw file name. + * @fw_entry: firmware class struct to request/release the fw. + * @rx_state: the rx state for kim's receive func during fw download. + * @rx_count: the rx count for the kim's receive func during fw download. + * @rx_skb: all of fw data might not come at once, and hence data storage for + * whole of the fw response, only HCI_EVENTs and hence diff from ST's + * response. + * @core_data: ST core's data, which mainly is the tty's disc_data + * @version: chip version available via a sysfs entry. + * + */ +struct kim_data_s { + long uim_pid; + struct platform_device *kim_pdev; + struct completion kim_rcvd, ldisc_installed; + char resp_buffer[30]; + const struct firmware *fw_entry; + unsigned nshutdown; + unsigned long rx_state; + unsigned long rx_count; + struct sk_buff *rx_skb; + struct st_data_s *core_data; + struct chip_version version; + unsigned char ldisc_install; + unsigned char dev_name[UART_DEV_NAME_LEN + 1]; + unsigned flow_cntrl; + unsigned baud_rate; +}; + +/** + * functions called when 1 of the protocol drivers gets + * registered, these need to communicate with UIM to request + * ldisc installed, read chip_version, download relevant fw + */ +long st_kim_start(void *); +long st_kim_stop(void *); + +void st_kim_complete(void *); +void kim_st_list_protocols(struct st_data_s *, void *); +void st_kim_recv(void *, const unsigned char *, long); + + +/* + * BTS headers + */ +#define ACTION_SEND_COMMAND 1 +#define ACTION_WAIT_EVENT 2 +#define ACTION_SERIAL 3 +#define ACTION_DELAY 4 +#define ACTION_RUN_SCRIPT 5 +#define ACTION_REMARKS 6 + +/** + * struct bts_header - the fw file is NOT binary which can + * be sent onto TTY as is. The .bts is more a script + * file which has different types of actions. + * Each such action needs to be parsed by the KIM and + * relevant procedure to be called. + */ +struct bts_header { + u32 magic; + u32 version; + u8 future[24]; + u8 actions[0]; +} __attribute__ ((packed)); + +/** + * struct bts_action - Each .bts action has its own type of + * data. + */ +struct bts_action { + u16 type; + u16 size; + u8 data[0]; +} __attribute__ ((packed)); + +struct bts_action_send { + u8 data[0]; +} __attribute__ ((packed)); + +struct bts_action_wait { + u32 msec; + u32 size; + u8 data[0]; +} __attribute__ ((packed)); + +struct bts_action_delay { + u32 msec; +} __attribute__ ((packed)); + +struct bts_action_serial { + u32 baud; + u32 flow_control; +} __attribute__ ((packed)); + +/** + * struct hci_command - the HCI-VS for intrepreting + * the change baud rate of host-side UART, which + * needs to be ignored, since UIM would do that + * when it receives request from KIM for ldisc installation. + */ +struct hci_command { + u8 prefix; + u16 opcode; + u8 plen; + u32 speed; +} __attribute__ ((packed)); + +/* + * header information used by st_ll.c + */ + +/* ST LL receiver states */ +#define ST_W4_PACKET_TYPE 0 +#define ST_W4_HEADER 1 +#define ST_W4_DATA 2 + +/* ST LL state machines */ +#define ST_LL_ASLEEP 0 +#define ST_LL_ASLEEP_TO_AWAKE 1 +#define ST_LL_AWAKE 2 +#define ST_LL_AWAKE_TO_ASLEEP 3 +#define ST_LL_INVALID 4 + +/* different PM notifications coming from chip */ +#define LL_SLEEP_IND 0x30 +#define LL_SLEEP_ACK 0x31 +#define LL_WAKE_UP_IND 0x32 +#define LL_WAKE_UP_ACK 0x33 + +/* initialize and de-init ST LL */ +long st_ll_init(struct st_data_s *); +long st_ll_deinit(struct st_data_s *); + +/** + * enable/disable ST LL along with KIM start/stop + * called by ST Core + */ +void st_ll_enable(struct st_data_s *); +void st_ll_disable(struct st_data_s *); + +/** + * various funcs used by ST core to set/get the various PM states + * of the chip. + */ +unsigned long st_ll_getstate(struct st_data_s *); +unsigned long st_ll_sleep_state(struct st_data_s *, unsigned char); +void st_ll_wakeup(struct st_data_s *); + +/* + * header information used by st_core.c for FM and GPS + * packet parsing, the bluetooth headers are already available + * at net/bluetooth/ + */ + +struct fm_event_hdr { + u8 plen; +} __attribute__ ((packed)); + +#define FM_MAX_FRAME_SIZE 0xFF /* TODO: */ +#define FM_EVENT_HDR_SIZE 1 /* size of fm_event_hdr */ +#define ST_FM_CH8_PKT 0x8 + +/* gps stuff */ +struct gps_event_hdr { + u8 opcode; + u16 plen; +} __attribute__ ((packed)); + +/** + * struct ti_st_plat_data - platform data shared between ST driver and + * platform specific board file which adds the ST device. + * @nshutdown_gpio: Host's GPIO line to which chip's BT_EN is connected. + * @dev_name: The UART/TTY name to which chip is interfaced. (eg: /dev/ttyS1) + * @flow_cntrl: Should always be 1, since UART's CTS/RTS is used for PM + * purposes. + * @baud_rate: The baud rate supported by the Host UART controller, this will + * be shared across with the chip via a HCI VS command from User-Space Init + * Mgr application. + * @suspend: + * @resume: legacy PM routines hooked to platform specific board file, so as + * to take chip-host interface specific action. + * @chip_enable: + * @chip_disable: Platform/Interface specific mux mode setting, GPIO + * configuring, Host side PM disabling etc.. can be done here. + * @chip_asleep: + * @chip_awake: Chip specific deep sleep states is communicated to Host + * specific board-xx.c to take actions such as cut UART clocks when chip + * asleep or run host faster when chip awake etc.. + * + */ +struct ti_st_plat_data { + u32 nshutdown_gpio; + unsigned char dev_name[UART_DEV_NAME_LEN]; /* uart name */ + u32 flow_cntrl; /* flow control flag */ + u32 baud_rate; + int (*suspend)(struct platform_device *, pm_message_t); + int (*resume)(struct platform_device *); + int (*chip_enable) (struct kim_data_s *); + int (*chip_disable) (struct kim_data_s *); + int (*chip_asleep) (struct kim_data_s *); + int (*chip_awake) (struct kim_data_s *); +}; + +#endif /* TI_WILINK_ST_H */ -- cgit v1.2.3-54-g00ecf