From b4b7ff4b08e691656c9d77c758fc355833128ac0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 20 Jan 2016 14:01:31 -0300 Subject: Linux-libre 4.4-gnu --- include/media/atmel-isi.h | 131 ------------------- include/media/davinci/vpbe_display.h | 3 +- include/media/lirc_dev.h | 120 ++++++++++-------- include/media/media-entity.h | 7 ++ include/media/soc_camera.h | 2 +- include/media/tuner-types.h | 182 +++++++++++++++++---------- include/media/tuner.h | 152 +++++++++++++--------- include/media/tveeprom.h | 83 ++++++++++--- include/media/v4l2-dv-timings.h | 34 ++--- include/media/v4l2-ioctl.h | 8 ++ include/media/v4l2-mem2mem.h | 11 +- include/media/videobuf2-core.h | 235 +++++++++++++++-------------------- include/media/videobuf2-dma-contig.h | 2 +- include/media/videobuf2-dma-sg.h | 2 +- include/media/videobuf2-dvb.h | 8 +- include/media/videobuf2-memops.h | 2 +- include/media/videobuf2-v4l2.h | 149 ++++++++++++++++++++++ include/media/videobuf2-vmalloc.h | 2 +- 18 files changed, 651 insertions(+), 482 deletions(-) delete mode 100644 include/media/atmel-isi.h create mode 100644 include/media/videobuf2-v4l2.h (limited to 'include/media') diff --git a/include/media/atmel-isi.h b/include/media/atmel-isi.h deleted file mode 100644 index 6008b0985..000000000 --- a/include/media/atmel-isi.h +++ /dev/null @@ -1,131 +0,0 @@ -/* - * Register definitions for the Atmel Image Sensor Interface. - * - * Copyright (C) 2011 Atmel Corporation - * Josh Wu, - * - * Based on previous work by Lars Haring, - * and Sedji Gaouaou - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ATMEL_ISI_H__ -#define __ATMEL_ISI_H__ - -#include - -/* ISI_V2 register offsets */ -#define ISI_CFG1 0x0000 -#define ISI_CFG2 0x0004 -#define ISI_PSIZE 0x0008 -#define ISI_PDECF 0x000c -#define ISI_Y2R_SET0 0x0010 -#define ISI_Y2R_SET1 0x0014 -#define ISI_R2Y_SET0 0x0018 -#define ISI_R2Y_SET1 0x001C -#define ISI_R2Y_SET2 0x0020 -#define ISI_CTRL 0x0024 -#define ISI_STATUS 0x0028 -#define ISI_INTEN 0x002C -#define ISI_INTDIS 0x0030 -#define ISI_INTMASK 0x0034 -#define ISI_DMA_CHER 0x0038 -#define ISI_DMA_CHDR 0x003C -#define ISI_DMA_CHSR 0x0040 -#define ISI_DMA_P_ADDR 0x0044 -#define ISI_DMA_P_CTRL 0x0048 -#define ISI_DMA_P_DSCR 0x004C -#define ISI_DMA_C_ADDR 0x0050 -#define ISI_DMA_C_CTRL 0x0054 -#define ISI_DMA_C_DSCR 0x0058 - -/* Bitfields in CFG1 */ -#define ISI_CFG1_HSYNC_POL_ACTIVE_LOW (1 << 2) -#define ISI_CFG1_VSYNC_POL_ACTIVE_LOW (1 << 3) -#define ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING (1 << 4) -#define ISI_CFG1_EMB_SYNC (1 << 6) -#define ISI_CFG1_CRC_SYNC (1 << 7) -/* Constants for FRATE(ISI_V2) */ -#define ISI_CFG1_FRATE_CAPTURE_ALL (0 << 8) -#define ISI_CFG1_FRATE_DIV_2 (1 << 8) -#define ISI_CFG1_FRATE_DIV_3 (2 << 8) -#define ISI_CFG1_FRATE_DIV_4 (3 << 8) -#define ISI_CFG1_FRATE_DIV_5 (4 << 8) -#define ISI_CFG1_FRATE_DIV_6 (5 << 8) -#define ISI_CFG1_FRATE_DIV_7 (6 << 8) -#define ISI_CFG1_FRATE_DIV_8 (7 << 8) -#define ISI_CFG1_FRATE_DIV_MASK (7 << 8) -#define ISI_CFG1_DISCR (1 << 11) -#define ISI_CFG1_FULL_MODE (1 << 12) -/* Definition for THMASK(ISI_V2) */ -#define ISI_CFG1_THMASK_BEATS_4 (0 << 13) -#define ISI_CFG1_THMASK_BEATS_8 (1 << 13) -#define ISI_CFG1_THMASK_BEATS_16 (2 << 13) - -/* Bitfields in CFG2 */ -#define ISI_CFG2_GRAYSCALE (1 << 13) -/* Constants for YCC_SWAP(ISI_V2) */ -#define ISI_CFG2_YCC_SWAP_DEFAULT (0 << 28) -#define ISI_CFG2_YCC_SWAP_MODE_1 (1 << 28) -#define ISI_CFG2_YCC_SWAP_MODE_2 (2 << 28) -#define ISI_CFG2_YCC_SWAP_MODE_3 (3 << 28) -#define ISI_CFG2_YCC_SWAP_MODE_MASK (3 << 28) -#define ISI_CFG2_IM_VSIZE_OFFSET 0 -#define ISI_CFG2_IM_HSIZE_OFFSET 16 -#define ISI_CFG2_IM_VSIZE_MASK (0x7FF << ISI_CFG2_IM_VSIZE_OFFSET) -#define ISI_CFG2_IM_HSIZE_MASK (0x7FF << ISI_CFG2_IM_HSIZE_OFFSET) - -/* Bitfields in CTRL */ -/* Also using in SR(ISI_V2) */ -#define ISI_CTRL_EN (1 << 0) -#define ISI_CTRL_CDC (1 << 8) -/* Also using in SR/IER/IDR/IMR(ISI_V2) */ -#define ISI_CTRL_DIS (1 << 1) -#define ISI_CTRL_SRST (1 << 2) - -/* Bitfields in SR */ -#define ISI_SR_SIP (1 << 19) -/* Also using in SR/IER/IDR/IMR */ -#define ISI_SR_VSYNC (1 << 10) -#define ISI_SR_PXFR_DONE (1 << 16) -#define ISI_SR_CXFR_DONE (1 << 17) -#define ISI_SR_P_OVR (1 << 24) -#define ISI_SR_C_OVR (1 << 25) -#define ISI_SR_CRC_ERR (1 << 26) -#define ISI_SR_FR_OVR (1 << 27) - -/* Bitfields in DMA_C_CTRL & in DMA_P_CTRL */ -#define ISI_DMA_CTRL_FETCH (1 << 0) -#define ISI_DMA_CTRL_WB (1 << 1) -#define ISI_DMA_CTRL_IEN (1 << 2) -#define ISI_DMA_CTRL_DONE (1 << 3) - -/* Bitfields in DMA_CHSR/CHER/CHDR */ -#define ISI_DMA_CHSR_P_CH (1 << 0) -#define ISI_DMA_CHSR_C_CH (1 << 1) - -/* Definition for isi_platform_data */ -#define ISI_DATAWIDTH_8 0x01 -#define ISI_DATAWIDTH_10 0x02 - -struct v4l2_async_subdev; - -struct isi_platform_data { - u8 has_emb_sync; - u8 emb_crc_sync; - u8 hsync_act_low; - u8 vsync_act_low; - u8 pclk_act_falling; - u8 full_mode; - u32 data_width_flags; - /* Using for ISI_CFG1 */ - u32 frate; - /* Using for ISI_MCK */ - u32 mck_hz; - struct v4l2_async_subdev **asd; /* Flat array, arranged in groups */ - int *asd_sizes; /* 0-terminated array of asd group sizes */ -}; - -#endif /* __ATMEL_ISI_H__ */ diff --git a/include/media/davinci/vpbe_display.h b/include/media/davinci/vpbe_display.h index fa0247ad8..e14a9370b 100644 --- a/include/media/davinci/vpbe_display.h +++ b/include/media/davinci/vpbe_display.h @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -64,7 +65,7 @@ struct display_layer_info { }; struct vpbe_disp_buffer { - struct vb2_buffer vb; + struct vb2_v4l2_buffer vb; struct list_head list; }; diff --git a/include/media/lirc_dev.h b/include/media/lirc_dev.h index 05e7ad5d2..0ab59a571 100644 --- a/include/media/lirc_dev.h +++ b/include/media/lirc_dev.h @@ -118,6 +118,71 @@ static inline unsigned int lirc_buffer_write(struct lirc_buffer *buf, return ret; } +/** + * struct lirc_driver - Defines the parameters on a LIRC driver + * + * @name: this string will be used for logs + * + * @minor: indicates minor device (/dev/lirc) number for + * registered driver if caller fills it with negative + * value, then the first free minor number will be used + * (if available). + * + * @code_length: length of the remote control key code expressed in bits. + * + * @buffer_size: Number of FIFO buffers with @chunk_size size. If zero, + * creates a buffer with BUFLEN size (16 bytes). + * + * @sample_rate: if zero, the device will wait for an event with a new + * code to be parsed. Otherwise, specifies the sample + * rate for polling. Value should be between 0 + * and HZ. If equal to HZ, it would mean one polling per + * second. + * + * @features: lirc compatible hardware features, like LIRC_MODE_RAW, + * LIRC_CAN_*, as defined at include/media/lirc.h. + * + * @chunk_size: Size of each FIFO buffer. + * + * @data: it may point to any driver data and this pointer will + * be passed to all callback functions. + * + * @min_timeout: Minimum timeout for record. Valid only if + * LIRC_CAN_SET_REC_TIMEOUT is defined. + * + * @max_timeout: Maximum timeout for record. Valid only if + * LIRC_CAN_SET_REC_TIMEOUT is defined. + * + * @add_to_buf: add_to_buf will be called after specified period of the + * time or triggered by the external event, this behavior + * depends on value of the sample_rate this function will + * be called in user context. This routine should return + * 0 if data was added to the buffer and -ENODATA if none + * was available. This should add some number of bits + * evenly divisible by code_length to the buffer. + * + * @rbuf: if not NULL, it will be used as a read buffer, you will + * have to write to the buffer by other means, like irq's + * (see also lirc_serial.c). + * + * @set_use_inc: set_use_inc will be called after device is opened + * + * @set_use_dec: set_use_dec will be called after device is closed + * + * @rdev: Pointed to struct rc_dev associated with the LIRC + * device. + * + * @fops: file_operations for drivers which don't fit the current + * driver model. + * Some ioctl's can be directly handled by lirc_dev if the + * driver's ioctl function is NULL or if it returns + * -ENOIOCTLCMD (see also lirc_serial.c). + * + * @dev: pointer to the struct device associated with the LIRC + * device. + * + * @owner: the module owning this struct + */ struct lirc_driver { char name[40]; int minor; @@ -131,65 +196,16 @@ struct lirc_driver { void *data; int min_timeout; int max_timeout; - int (*add_to_buf) (void *data, struct lirc_buffer *buf); + int (*add_to_buf)(void *data, struct lirc_buffer *buf); struct lirc_buffer *rbuf; - int (*set_use_inc) (void *data); - void (*set_use_dec) (void *data); + int (*set_use_inc)(void *data); + void (*set_use_dec)(void *data); struct rc_dev *rdev; const struct file_operations *fops; struct device *dev; struct module *owner; }; -/* name: - * this string will be used for logs - * - * minor: - * indicates minor device (/dev/lirc) number for registered driver - * if caller fills it with negative value, then the first free minor - * number will be used (if available) - * - * code_length: - * length of the remote control key code expressed in bits - * - * sample_rate: - * - * data: - * it may point to any driver data and this pointer will be passed to - * all callback functions - * - * add_to_buf: - * add_to_buf will be called after specified period of the time or - * triggered by the external event, this behavior depends on value of - * the sample_rate this function will be called in user context. This - * routine should return 0 if data was added to the buffer and - * -ENODATA if none was available. This should add some number of bits - * evenly divisible by code_length to the buffer - * - * rbuf: - * if not NULL, it will be used as a read buffer, you will have to - * write to the buffer by other means, like irq's (see also - * lirc_serial.c). - * - * set_use_inc: - * set_use_inc will be called after device is opened - * - * set_use_dec: - * set_use_dec will be called after device is closed - * - * fops: - * file_operations for drivers which don't fit the current driver model. - * - * Some ioctl's can be directly handled by lirc_dev if the driver's - * ioctl function is NULL or if it returns -ENOIOCTLCMD (see also - * lirc_serial.c). - * - * owner: - * the module owning this struct - * - */ - - /* following functions can be called ONLY from user context * * returns negative value on error or minor number diff --git a/include/media/media-entity.h b/include/media/media-entity.h index 0c003d817..197f93799 100644 --- a/include/media/media-entity.h +++ b/include/media/media-entity.h @@ -116,6 +116,13 @@ static inline u32 media_entity_subtype(struct media_entity *entity) #define MEDIA_ENTITY_ENUM_MAX_DEPTH 16 #define MEDIA_ENTITY_ENUM_MAX_ID 64 +/* + * The number of pads can't be bigger than the number of entities, + * as the worse-case scenario is to have one entity linked up to + * MEDIA_ENTITY_ENUM_MAX_ID - 1 entities. + */ +#define MEDIA_ENTITY_MAX_PADS (MEDIA_ENTITY_ENUM_MAX_ID - 1) + struct media_entity_graph { struct { struct media_entity *entity; diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h index 2f6261f3e..97aa13314 100644 --- a/include/media/soc_camera.h +++ b/include/media/soc_camera.h @@ -18,7 +18,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/include/media/tuner-types.h b/include/media/tuner-types.h index ab03c5344..094e112cc 100644 --- a/include/media/tuner-types.h +++ b/include/media/tuner-types.h @@ -5,6 +5,15 @@ #ifndef __TUNER_TYPES_H__ #define __TUNER_TYPES_H__ +/** + * enum param_type - type of the tuner pameters + * + * @TUNER_PARAM_TYPE_RADIO: Tuner params are for FM and/or AM radio + * @TUNER_PARAM_TYPE_PAL: Tuner params are for PAL color TV standard + * @TUNER_PARAM_TYPE_SECAM: Tuner params are for SECAM color TV standard + * @TUNER_PARAM_TYPE_NTSC: Tuner params are for NTSC color TV standard + * @TUNER_PARAM_TYPE_DIGITAL: Tuner params are for digital TV + */ enum param_type { TUNER_PARAM_TYPE_RADIO, TUNER_PARAM_TYPE_PAL, @@ -13,97 +22,142 @@ enum param_type { TUNER_PARAM_TYPE_DIGITAL, }; +/** + * struct tuner_range - define the frequencies supported by the tuner + * + * @limit: Max frequency supported by that range, in 62.5 kHz + * (TV) or 62.5 Hz (Radio), as defined by + * V4L2_TUNER_CAP_LOW. + * @config: Value of the band switch byte (BB) to setup this mode. + * @cb: Value of the CB byte to setup this mode. + * + * Please notice that digital tuners like xc3028/xc4000/xc5000 don't use + * those ranges, as they're defined inside the driver. This is used by + * analog tuners that are compatible with the "Philips way" to setup the + * tuners. On those devices, the tuner set is done via 4 bytes: + * divider byte1 (DB1), divider byte 2 (DB2), Control byte (CB) and + * band switch byte (BB). + * Some tuners also have an additional optional Auxiliary byte (AB). + */ struct tuner_range { unsigned short limit; unsigned char config; unsigned char cb; }; +/** + * struct tuner_params - Parameters to be used to setup the tuner. Those + * are used by drivers/media/tuners/tuner-types.c in + * order to specify the tuner properties. Most of + * the parameters are for tuners based on tda9887 IF-PLL + * multi-standard analog TV/Radio demodulator, with is + * very common on legacy analog tuners. + * + * @type: Type of the tuner parameters, as defined at + * enum param_type. If the tuner supports multiple + * standards, an array should be used, with one + * row per different standard. + * @cb_first_if_lower_freq: Many Philips-based tuners have a comment in + * their datasheet like + * "For channel selection involving band + * switching, and to ensure smooth tuning to the + * desired channel without causing unnecessary + * charge pump action, it is recommended to + * consider the difference between wanted channel + * frequency and the current channel frequency. + * Unnecessary charge pump action will result + * in very low tuning voltage which may drive the + * oscillator to extreme conditions". + * Set cb_first_if_lower_freq to 1, if this check + * is required for this tuner. I tested this for + * PAL by first setting the TV frequency to + * 203 MHz and then switching to 96.6 MHz FM + * radio. The result was static unless the + * control byte was sent first. + * @has_tda9887: Set to 1 if this tuner uses a tda9887 + * @port1_fm_high_sensitivity: Many Philips tuners use tda9887 PORT1 to select + * the FM radio sensitivity. If this setting is 1, + * then set PORT1 to 1 to get proper FM reception. + * @port2_fm_high_sensitivity: Some Philips tuners use tda9887 PORT2 to select + * the FM radio sensitivity. If this setting is 1, + * then set PORT2 to 1 to get proper FM reception. + * @fm_gain_normal: Some Philips tuners use tda9887 cGainNormal to + * select the FM radio sensitivity. If this + * setting is 1, e register will use cGainNormal + * instead of cGainLow. + * @intercarrier_mode: Most tuners with a tda9887 use QSS mode. + * Some (cheaper) tuners use Intercarrier mode. + * If this setting is 1, then the tuner needs to + * be set to intercarrier mode. + * @port1_active: This setting sets the default value for PORT1. + * 0 means inactive, 1 means active. Note: the + * actual bit value written to the tda9887 is + * inverted. So a 0 here means a 1 in the B6 bit. + * @port2_active: This setting sets the default value for PORT2. + * 0 means inactive, 1 means active. Note: the + * actual bit value written to the tda9887 is + * inverted. So a 0 here means a 1 in the B7 bit. + * @port1_invert_for_secam_lc: Sometimes PORT1 is inverted when the SECAM-L' + * standard is selected. Set this bit to 1 if this + * is needed. + * @port2_invert_for_secam_lc: Sometimes PORT2 is inverted when the SECAM-L' + * standard is selected. Set this bit to 1 if this + * is needed. + * @port1_set_for_fm_mono: Some cards require PORT1 to be 1 for mono Radio + * FM and 0 for stereo. + * @default_pll_gating_18: Select 18% (or according to datasheet 0%) + * L standard PLL gating, vs the driver default + * of 36%. + * @radio_if: IF to use in radio mode. Tuners with a + * separate radio IF filter seem to use 10.7, + * while those without use 33.3 for PAL/SECAM + * tuners and 41.3 for NTSC tuners. + * 0 = 10.7, 1 = 33.3, 2 = 41.3 + * @default_top_low: Default tda9887 TOP value in dB for the low + * band. Default is 0. Range: -16:+15 + * @default_top_mid: Default tda9887 TOP value in dB for the mid + * band. Default is 0. Range: -16:+15 + * @default_top_high: Default tda9887 TOP value in dB for the high + * band. Default is 0. Range: -16:+15 + * @default_top_secam_low: Default tda9887 TOP value in dB for SECAM-L/L' + * for the low band. Default is 0. Several tuners + * require a different TOP value for the + * SECAM-L/L' standards. Range: -16:+15 + * @default_top_secam_mid: Default tda9887 TOP value in dB for SECAM-L/L' + * for the mid band. Default is 0. Several tuners + * require a different TOP value for the + * SECAM-L/L' standards. Range: -16:+15 + * @default_top_secam_high: Default tda9887 TOP value in dB for SECAM-L/L' + * for the high band. Default is 0. Several tuners + * require a different TOP value for the + * SECAM-L/L' standards. Range: -16:+15 + * @iffreq: Intermediate frequency (IF) used by the tuner + * on digital mode. + * @count: Size of the ranges array. + * @ranges: Array with the frequency ranges supported by + * the tuner. + */ struct tuner_params { enum param_type type; - /* Many Philips based tuners have a comment like this in their - * datasheet: - * - * For channel selection involving band switching, and to ensure - * smooth tuning to the desired channel without causing - * unnecessary charge pump action, it is recommended to consider - * the difference between wanted channel frequency and the - * current channel frequency. Unnecessary charge pump action - * will result in very low tuning voltage which may drive the - * oscillator to extreme conditions. - * - * Set cb_first_if_lower_freq to 1, if this check is - * required for this tuner. - * - * I tested this for PAL by first setting the TV frequency to - * 203 MHz and then switching to 96.6 MHz FM radio. The result was - * static unless the control byte was sent first. - */ unsigned int cb_first_if_lower_freq:1; - /* Set to 1 if this tuner uses a tda9887 */ unsigned int has_tda9887:1; - /* Many Philips tuners use tda9887 PORT1 to select the FM radio - sensitivity. If this setting is 1, then set PORT1 to 1 to - get proper FM reception. */ unsigned int port1_fm_high_sensitivity:1; - /* Some Philips tuners use tda9887 PORT2 to select the FM radio - sensitivity. If this setting is 1, then set PORT2 to 1 to - get proper FM reception. */ unsigned int port2_fm_high_sensitivity:1; - /* Some Philips tuners use tda9887 cGainNormal to select the FM radio - sensitivity. If this setting is 1, e register will use cGainNormal - instead of cGainLow. */ unsigned int fm_gain_normal:1; - /* Most tuners with a tda9887 use QSS mode. Some (cheaper) tuners - use Intercarrier mode. If this setting is 1, then the tuner - needs to be set to intercarrier mode. */ unsigned int intercarrier_mode:1; - /* This setting sets the default value for PORT1. - 0 means inactive, 1 means active. Note: the actual bit - value written to the tda9887 is inverted. So a 0 here - means a 1 in the B6 bit. */ unsigned int port1_active:1; - /* This setting sets the default value for PORT2. - 0 means inactive, 1 means active. Note: the actual bit - value written to the tda9887 is inverted. So a 0 here - means a 1 in the B7 bit. */ unsigned int port2_active:1; - /* Sometimes PORT1 is inverted when the SECAM-L' standard is selected. - Set this bit to 1 if this is needed. */ unsigned int port1_invert_for_secam_lc:1; - /* Sometimes PORT2 is inverted when the SECAM-L' standard is selected. - Set this bit to 1 if this is needed. */ unsigned int port2_invert_for_secam_lc:1; - /* Some cards require PORT1 to be 1 for mono Radio FM and 0 for stereo. */ unsigned int port1_set_for_fm_mono:1; - /* Select 18% (or according to datasheet 0%) L standard PLL gating, - vs the driver default of 36%. */ unsigned int default_pll_gating_18:1; - /* IF to use in radio mode. Tuners with a separate radio IF filter - seem to use 10.7, while those without use 33.3 for PAL/SECAM tuners - and 41.3 for NTSC tuners. 0 = 10.7, 1 = 33.3, 2 = 41.3 */ unsigned int radio_if:2; - /* Default tda9887 TOP value in dB for the low band. Default is 0. - Range: -16:+15 */ signed int default_top_low:5; - /* Default tda9887 TOP value in dB for the mid band. Default is 0. - Range: -16:+15 */ signed int default_top_mid:5; - /* Default tda9887 TOP value in dB for the high band. Default is 0. - Range: -16:+15 */ signed int default_top_high:5; - /* Default tda9887 TOP value in dB for SECAM-L/L' for the low band. - Default is 0. Several tuners require a different TOP value for - the SECAM-L/L' standards. Range: -16:+15 */ signed int default_top_secam_low:5; - /* Default tda9887 TOP value in dB for SECAM-L/L' for the mid band. - Default is 0. Several tuners require a different TOP value for - the SECAM-L/L' standards. Range: -16:+15 */ signed int default_top_secam_mid:5; - /* Default tda9887 TOP value in dB for SECAM-L/L' for the high band. - Default is 0. Several tuners require a different TOP value for - the SECAM-L/L' standards. Range: -16:+15 */ signed int default_top_secam_high:5; u16 iffreq; diff --git a/include/media/tuner.h b/include/media/tuner.h index b46ebb48f..486b6a543 100644 --- a/include/media/tuner.h +++ b/include/media/tuner.h @@ -1,23 +1,19 @@ /* - tuner.h - definition for different tuners - - Copyright (C) 1997 Markus Schroeder (schroedm@uni-duesseldorf.de) - minor modifications by Ralph Metzler (rjkm@thp.uni-koeln.de) - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ + * tuner.h - definition for different tuners + * + * Copyright (C) 1997 Markus Schroeder (schroedm@uni-duesseldorf.de) + * minor modifications by Ralph Metzler (rjkm@thp.uni-koeln.de) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ #ifndef _TUNER_H #define _TUNER_H @@ -83,8 +79,11 @@ #define TUNER_PHILIPS_FM1236_MK3 43 #define TUNER_PHILIPS_4IN1 44 /* ATI TV Wonder Pro - Conexant */ -/* Microtune merged with Temic 12/31/1999 partially financed by Alps - these may be similar to Temic */ -#define TUNER_MICROTUNE_4049FM5 45 + /* + * Microtune merged with Temic 12/31/1999 partially financed by Alps. + * these may be similar to Temic + */ +#define TUNER_MICROTUNE_4049FM5 45 #define TUNER_PANASONIC_VP27 46 #define TUNER_LG_NTSC_TAPE 47 @@ -115,11 +114,11 @@ #define TUNER_PHILIPS_TUV1236D 68 /* ATI HDTV Wonder */ #define TUNER_TNF_5335MF 69 /* Sabrent Bt848 */ -#define TUNER_SAMSUNG_TCPN_2121P30A 70 /* Hauppauge PVR-500MCE NTSC */ +#define TUNER_SAMSUNG_TCPN_2121P30A 70 /* Hauppauge PVR-500MCE NTSC */ #define TUNER_XC2028 71 #define TUNER_THOMSON_FE6600 72 /* DViCO FusionHDTV DVB-T Hybrid */ -#define TUNER_SAMSUNG_TCPG_6121P30A 73 /* Hauppauge PVR-500 PAL */ +#define TUNER_SAMSUNG_TCPG_6121P30A 73 /* Hauppauge PVR-500 PAL */ #define TUNER_TDA9887 74 /* This tuner should be used only internally */ #define TUNER_TEA5761 75 /* Only FM Radio Tuner */ #define TUNER_XC5000 76 /* Xceive Silicon Tuner */ @@ -143,57 +142,92 @@ #define TUNER_SONY_BTF_PB463Z 91 /* NTSC */ /* tv card specific */ -#define TDA9887_PRESENT (1<<0) -#define TDA9887_PORT1_INACTIVE (1<<1) -#define TDA9887_PORT2_INACTIVE (1<<2) -#define TDA9887_QSS (1<<3) -#define TDA9887_INTERCARRIER (1<<4) -#define TDA9887_PORT1_ACTIVE (1<<5) -#define TDA9887_PORT2_ACTIVE (1<<6) -#define TDA9887_INTERCARRIER_NTSC (1<<7) +#define TDA9887_PRESENT (1<<0) +#define TDA9887_PORT1_INACTIVE (1<<1) +#define TDA9887_PORT2_INACTIVE (1<<2) +#define TDA9887_QSS (1<<3) +#define TDA9887_INTERCARRIER (1<<4) +#define TDA9887_PORT1_ACTIVE (1<<5) +#define TDA9887_PORT2_ACTIVE (1<<6) +#define TDA9887_INTERCARRIER_NTSC (1<<7) /* Tuner takeover point adjustment, in dB, -16 <= top <= 15 */ -#define TDA9887_TOP_MASK (0x3f << 8) -#define TDA9887_TOP_SET (1 << 13) -#define TDA9887_TOP(top) (TDA9887_TOP_SET | (((16 + (top)) & 0x1f) << 8)) +#define TDA9887_TOP_MASK (0x3f << 8) +#define TDA9887_TOP_SET (1 << 13) +#define TDA9887_TOP(top) (TDA9887_TOP_SET | \ + (((16 + (top)) & 0x1f) << 8)) /* config options */ -#define TDA9887_DEEMPHASIS_MASK (3<<16) -#define TDA9887_DEEMPHASIS_NONE (1<<16) -#define TDA9887_DEEMPHASIS_50 (2<<16) -#define TDA9887_DEEMPHASIS_75 (3<<16) -#define TDA9887_AUTOMUTE (1<<18) +#define TDA9887_DEEMPHASIS_MASK (3<<16) +#define TDA9887_DEEMPHASIS_NONE (1<<16) +#define TDA9887_DEEMPHASIS_50 (2<<16) +#define TDA9887_DEEMPHASIS_75 (3<<16) +#define TDA9887_AUTOMUTE (1<<18) #define TDA9887_GATING_18 (1<<19) #define TDA9887_GAIN_NORMAL (1<<20) #define TDA9887_RIF_41_3 (1<<21) /* radio IF1 41.3 vs 33.3 */ +/** + * enum tuner_mode - Mode of the tuner + * + * @T_RADIO: Tuner core will work in radio mode + * @T_ANALOG_TV: Tuner core will work in analog TV mode + * + * Older boards only had a single tuner device, but some devices have a + * separate tuner for radio. In any case, the tuner-core needs to know if + * the tuner chip(s) will be used in radio mode or analog TV mode, as, on + * radio mode, frequencies are specified on a different range than on TV + * mode. This enum is used by the tuner core in order to work with the + * proper tuner range and eventually use a different tuner chip while in + * radio mode. + */ enum tuner_mode { T_RADIO = 1 << V4L2_TUNER_RADIO, T_ANALOG_TV = 1 << V4L2_TUNER_ANALOG_TV, - /* Don't need to map V4L2_TUNER_DIGITAL_TV, as tuner-core won't use it */ + /* Don't map V4L2_TUNER_DIGITAL_TV, as tuner-core won't use it */ }; -/* Older boards only had a single tuner device. Nowadays multiple tuner - devices may be present on a single board. Using TUNER_SET_TYPE_ADDR - to pass the tuner_setup structure it is possible to setup each tuner - device in turn. - - Since multiple devices may be present it is no longer sufficient to - send a command to a single i2c device. Instead you should broadcast - the command to all i2c devices. - - By setting the mode_mask correctly you can select which commands are - accepted by a specific tuner device. For example, set mode_mask to - T_RADIO if the device is a radio-only tuner. That specific tuner will - only accept commands when the tuner is in radio mode and ignore them - when the tuner is set to TV mode. +/** + * struct tuner_setup - setup the tuner chipsets + * + * @addr: I2C address used to control the tuner device/chipset + * @type: Type of the tuner, as defined at the TUNER_* macros. + * Each different tuner model should have an unique + * identifier. + * @mode_mask: Mask with the allowed tuner modes: V4L2_TUNER_RADIO, + * V4L2_TUNER_ANALOG_TV and/or V4L2_TUNER_DIGITAL_TV, + * describing if the tuner should be used to support + * Radio, analog TV and/or digital TV. + * @config: Used to send tuner-specific configuration for complex + * tuners that require extra parameters to be set. + * Only a very few tuners require it and its usage on + * newer tuners should be avoided. + * @tuner_callback: Some tuners require to call back the bridge driver, + * in order to do some tasks like rising a GPIO at the + * bridge chipset, in order to do things like resetting + * the device. + * + * Older boards only had a single tuner device. Nowadays multiple tuner + * devices may be present on a single board. Using TUNER_SET_TYPE_ADDR + * to pass the tuner_setup structure it is possible to setup each tuner + * device in turn. + * + * Since multiple devices may be present it is no longer sufficient to + * send a command to a single i2c device. Instead you should broadcast + * the command to all i2c devices. + * + * By setting the mode_mask correctly you can select which commands are + * accepted by a specific tuner device. For example, set mode_mask to + * T_RADIO if the device is a radio-only tuner. That specific tuner will + * only accept commands when the tuner is in radio mode and ignore them + * when the tuner is set to TV mode. */ struct tuner_setup { - unsigned short addr; /* I2C address */ - unsigned int type; /* Tuner type */ - unsigned int mode_mask; /* Allowed tuner modes */ - void *config; /* configuraion for more complex tuners */ - int (*tuner_callback) (void *dev, int component, int cmd, int arg); + unsigned short addr; + unsigned int type; + unsigned int mode_mask; + void *config; + int (*tuner_callback)(void *dev, int component, int cmd, int arg); }; #endif /* __KERNEL__ */ diff --git a/include/media/tveeprom.h b/include/media/tveeprom.h index f7119ee39..8be898739 100644 --- a/include/media/tveeprom.h +++ b/include/media/tveeprom.h @@ -1,28 +1,63 @@ + /* + * tveeprom - Contains structures and functions to work with Hauppauge + * eeproms. */ +#include + +/** + * enum tveeprom_audio_processor - Specifies the type of audio processor + * used on a Hauppauge device. + * + * @TVEEPROM_AUDPROC_NONE: No audio processor present + * @TVEEPROM_AUDPROC_INTERNAL: The audio processor is internal to the + * video processor + * @TVEEPROM_AUDPROC_MSP: The audio processor is a MSPXXXX device + * @TVEEPROM_AUDPROC_OTHER: The audio processor is another device + */ enum tveeprom_audio_processor { - /* No audio processor present */ TVEEPROM_AUDPROC_NONE, - /* The audio processor is internal to the video processor */ TVEEPROM_AUDPROC_INTERNAL, - /* The audio processor is a MSPXXXX device */ TVEEPROM_AUDPROC_MSP, - /* The audio processor is another device */ TVEEPROM_AUDPROC_OTHER, }; -#include - +/** + * struct tveeprom - Contains the fields parsed from Hauppauge eeproms + * + * @has_radio: 1 if the device has radio; 0 otherwise. + * @has_ir: If has_ir == 0, then it is unknown what the IR + * capabilities are. Otherwise: + * bit 0) 1 (= IR capabilities are known); + * bit 1) IR receiver present; + * bit 2) IR transmitter (blaster) present. + * @has_MAC_address: 0: no MAC, 1: MAC present, 2: unknown. + * @tuner_type: type of the tuner (TUNER_*, as defined at + * include/media/tuner.h). + * @tuner_formats: Supported analog TV standards (V4L2_STD_*). + * @tuner_hauppauge_model: Hauppauge's code for the device model number. + * @tuner2_type: type of the second tuner (TUNER_*, as defined + * at include/media/tuner.h). + * @tuner2_formats: Tuner 2 supported analog TV standards + * (V4L2_STD_*). + * @tuner2_hauppauge_model: tuner 2 Hauppauge's code for the device model + * number. + * @audio_processor: analog audio decoder, as defined by enum + * tveeprom_audio_processor. + * @decoder_processor: Hauppauge's code for the decoder chipset. + * Unused by the drivers, as they probe the + * decoder based on the PCI or USB ID. + * @model: Hauppauge's model number + * @revision: Card revision number + * @serial_number: Card's serial number + * @rev_str: Card revision converted to number + * @MAC_address: MAC address for the network interface + */ struct tveeprom { u32 has_radio; - /* If has_ir == 0, then it is unknown what the IR capabilities are, - otherwise: - bit 0: 1 (= IR capabilities are known) - bit 1: IR receiver present - bit 2: IR transmitter (blaster) present */ u32 has_ir; - u32 has_MAC_address; /* 0: no MAC, 1: MAC present, 2: unknown */ + u32 has_MAC_address; u32 tuner_type; u32 tuner_formats; @@ -32,9 +67,6 @@ struct tveeprom { u32 tuner2_formats; u32 tuner2_hauppauge_model; - u32 digitizer; - u32 digitizer_formats; - u32 audio_processor; u32 decoder_processor; @@ -45,7 +77,28 @@ struct tveeprom { u8 MAC_address[ETH_ALEN]; }; +/** + * tveeprom_hauppauge_analog - Fill struct tveeprom using the contents + * of the eeprom previously filled at + * @eeprom_data field. + * + * @c: I2C client struct + * @tvee: Struct to where the eeprom parsed data will be filled; + * @eeprom_data: Array with the contents of the eeprom_data. It should + * contain 256 bytes filled with the contents of the + * eeprom read from the Hauppauge device. + */ void tveeprom_hauppauge_analog(struct i2c_client *c, struct tveeprom *tvee, unsigned char *eeprom_data); +/** + * tveeprom_read - Reads the contents of the eeprom found at the Hauppauge + * devices. + * + * @c: I2C client struct + * @eedata: Array where the eeprom content will be stored. + * @len: Size of @eedata array. If the eeprom content will be latter + * be parsed by tveeprom_hauppauge_analog(), len should be, at + * least, 256. + */ int tveeprom_read(struct i2c_client *c, unsigned char *eedata, int len); diff --git a/include/media/v4l2-dv-timings.h b/include/media/v4l2-dv-timings.h index b6130b50a..a209526b6 100644 --- a/include/media/v4l2-dv-timings.h +++ b/include/media/v4l2-dv-timings.h @@ -23,7 +23,7 @@ #include -/** +/* * v4l2_dv_timings_presets: list of all dv_timings presets. */ extern const struct v4l2_dv_timings v4l2_dv_timings_presets[]; @@ -127,16 +127,16 @@ void v4l2_print_dv_timings(const char *dev_prefix, const char *prefix, /** * v4l2_detect_cvt - detect if the given timings follow the CVT standard * - * @frame_height - the total height of the frame (including blanking) in lines. - * @hfreq - the horizontal frequency in Hz. - * @vsync - the height of the vertical sync in lines. - * @active_width - active width of image (does not include blanking). This + * @frame_height: the total height of the frame (including blanking) in lines. + * @hfreq: the horizontal frequency in Hz. + * @vsync: the height of the vertical sync in lines. + * @active_width: active width of image (does not include blanking). This * information is needed only in case of version 2 of reduced blanking. * In other cases, this parameter does not have any effect on timings. - * @polarities - the horizontal and vertical polarities (same as struct + * @polarities: the horizontal and vertical polarities (same as struct * v4l2_bt_timings polarities). - * @interlaced - if this flag is true, it indicates interlaced format - * @fmt - the resulting timings. + * @interlaced: if this flag is true, it indicates interlaced format + * @fmt: the resulting timings. * * This function will attempt to detect if the given values correspond to a * valid CVT format. If so, then it will return true, and fmt will be filled @@ -149,18 +149,18 @@ bool v4l2_detect_cvt(unsigned frame_height, unsigned hfreq, unsigned vsync, /** * v4l2_detect_gtf - detect if the given timings follow the GTF standard * - * @frame_height - the total height of the frame (including blanking) in lines. - * @hfreq - the horizontal frequency in Hz. - * @vsync - the height of the vertical sync in lines. - * @polarities - the horizontal and vertical polarities (same as struct + * @frame_height: the total height of the frame (including blanking) in lines. + * @hfreq: the horizontal frequency in Hz. + * @vsync: the height of the vertical sync in lines. + * @polarities: the horizontal and vertical polarities (same as struct * v4l2_bt_timings polarities). - * @interlaced - if this flag is true, it indicates interlaced format - * @aspect - preferred aspect ratio. GTF has no method of determining the + * @interlaced: if this flag is true, it indicates interlaced format + * @aspect: preferred aspect ratio. GTF has no method of determining the * aspect ratio in order to derive the image width from the * image height, so it has to be passed explicitly. Usually * the native screen aspect ratio is used for this. If it * is not filled in correctly, then 16:9 will be assumed. - * @fmt - the resulting timings. + * @fmt: the resulting timings. * * This function will attempt to detect if the given values correspond to a * valid GTF format. If so, then it will return true, and fmt will be filled @@ -174,8 +174,8 @@ bool v4l2_detect_gtf(unsigned frame_height, unsigned hfreq, unsigned vsync, * v4l2_calc_aspect_ratio - calculate the aspect ratio based on bytes * 0x15 and 0x16 from the EDID. * - * @hor_landscape - byte 0x15 from the EDID. - * @vert_portrait - byte 0x16 from the EDID. + * @hor_landscape: byte 0x15 from the EDID. + * @vert_portrait: byte 0x16 from the EDID. * * Determines the aspect ratio from the EDID. * See VESA Enhanced EDID standard, release A, rev 2, section 3.6.2: diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h index 8fbbd76d7..017ffb222 100644 --- a/include/media/v4l2-ioctl.h +++ b/include/media/v4l2-ioctl.h @@ -36,6 +36,8 @@ struct v4l2_ioctl_ops { struct v4l2_fmtdesc *f); int (*vidioc_enum_fmt_sdr_cap) (struct file *file, void *fh, struct v4l2_fmtdesc *f); + int (*vidioc_enum_fmt_sdr_out) (struct file *file, void *fh, + struct v4l2_fmtdesc *f); /* VIDIOC_G_FMT handlers */ int (*vidioc_g_fmt_vid_cap) (struct file *file, void *fh, @@ -60,6 +62,8 @@ struct v4l2_ioctl_ops { struct v4l2_format *f); int (*vidioc_g_fmt_sdr_cap) (struct file *file, void *fh, struct v4l2_format *f); + int (*vidioc_g_fmt_sdr_out) (struct file *file, void *fh, + struct v4l2_format *f); /* VIDIOC_S_FMT handlers */ int (*vidioc_s_fmt_vid_cap) (struct file *file, void *fh, @@ -84,6 +88,8 @@ struct v4l2_ioctl_ops { struct v4l2_format *f); int (*vidioc_s_fmt_sdr_cap) (struct file *file, void *fh, struct v4l2_format *f); + int (*vidioc_s_fmt_sdr_out) (struct file *file, void *fh, + struct v4l2_format *f); /* VIDIOC_TRY_FMT handlers */ int (*vidioc_try_fmt_vid_cap) (struct file *file, void *fh, @@ -108,6 +114,8 @@ struct v4l2_ioctl_ops { struct v4l2_format *f); int (*vidioc_try_fmt_sdr_cap) (struct file *file, void *fh, struct v4l2_format *f); + int (*vidioc_try_fmt_sdr_out) (struct file *file, void *fh, + struct v4l2_format *f); /* Buffer handlers */ int (*vidioc_reqbufs) (struct file *file, void *fh, struct v4l2_requestbuffers *b); diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h index 8849aaba6..5a9597dd1 100644 --- a/include/media/v4l2-mem2mem.h +++ b/include/media/v4l2-mem2mem.h @@ -17,7 +17,7 @@ #ifndef _MEDIA_V4L2_MEM2MEM_H #define _MEDIA_V4L2_MEM2MEM_H -#include +#include /** * struct v4l2_m2m_ops - mem-to-mem device driver callbacks @@ -90,7 +90,7 @@ struct v4l2_m2m_ctx { }; struct v4l2_m2m_buffer { - struct vb2_buffer vb; + struct vb2_v4l2_buffer vb; struct list_head list; }; @@ -105,9 +105,9 @@ void v4l2_m2m_job_finish(struct v4l2_m2m_dev *m2m_dev, struct v4l2_m2m_ctx *m2m_ctx); static inline void -v4l2_m2m_buf_done(struct vb2_buffer *buf, enum vb2_buffer_state state) +v4l2_m2m_buf_done(struct vb2_v4l2_buffer *buf, enum vb2_buffer_state state) { - vb2_buffer_done(buf, state); + vb2_buffer_done(&buf->vb2_buf, state); } int v4l2_m2m_reqbufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, @@ -160,7 +160,8 @@ static inline void v4l2_m2m_set_dst_buffered(struct v4l2_m2m_ctx *m2m_ctx, void v4l2_m2m_ctx_release(struct v4l2_m2m_ctx *m2m_ctx); -void v4l2_m2m_buf_queue(struct v4l2_m2m_ctx *m2m_ctx, struct vb2_buffer *vb); +void v4l2_m2m_buf_queue(struct v4l2_m2m_ctx *m2m_ctx, + struct vb2_v4l2_buffer *vbuf); /** * v4l2_m2m_num_src_bufs_ready() - return the number of source buffers ready for diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h index 589b56c68..647ebfe51 100644 --- a/include/media/videobuf2-core.h +++ b/include/media/videobuf2-core.h @@ -1,5 +1,5 @@ /* - * videobuf2-core.h - V4L2 driver helper framework + * videobuf2-core.h - Video Buffer 2 Core Framework * * Copyright (C) 2010 Samsung Electronics * @@ -15,9 +15,18 @@ #include #include #include -#include #include +#define VB2_MAX_FRAME (32) +#define VB2_MAX_PLANES (8) + +enum vb2_memory { + VB2_MEMORY_UNKNOWN = 0, + VB2_MEMORY_MMAP = 1, + VB2_MEMORY_USERPTR = 2, + VB2_MEMORY_DMABUF = 4, +}; + struct vb2_alloc_ctx; struct vb2_fileio_data; struct vb2_threadio_data; @@ -36,6 +45,8 @@ struct vb2_threadio_data; * no other users of this buffer are present); the buf_priv * argument is the allocator private per-buffer structure * previously returned from the alloc callback. + * @get_dmabuf: acquire userspace memory for a hardware operation; used for + * DMABUF memory types. * @get_userptr: acquire userspace memory for a hardware operation; used for * USERPTR memory types; vaddr is the address passed to the * videobuf layer when queuing a video buffer of USERPTR type; @@ -111,10 +122,40 @@ struct vb2_mem_ops { int (*mmap)(void *buf_priv, struct vm_area_struct *vma); }; +/** + * struct vb2_plane - plane information + * @mem_priv: private data with this plane + * @dbuf: dma_buf - shared buffer object + * @dbuf_mapped: flag to show whether dbuf is mapped or not + * @bytesused: number of bytes occupied by data in the plane (payload) + * @length: size of this plane (NOT the payload) in bytes + * @offset: when memory in the associated struct vb2_buffer is + * VB2_MEMORY_MMAP, equals the offset from the start of + * the device memory for this plane (or is a "cookie" that + * should be passed to mmap() called on the video node) + * @userptr: when memory is VB2_MEMORY_USERPTR, a userspace pointer + * pointing to this plane + * @fd: when memory is VB2_MEMORY_DMABUF, a userspace file + * descriptor associated with this plane + * @m: Union with memtype-specific data (@offset, @userptr or + * @fd). + * @data_offset: offset in the plane to the start of data; usually 0, + * unless there is a header in front of the data + * Should contain enough information to be able to cover all the fields + * of struct v4l2_plane at videodev2.h + */ struct vb2_plane { void *mem_priv; struct dma_buf *dbuf; unsigned int dbuf_mapped; + unsigned int bytesused; + unsigned int length; + union { + unsigned int offset; + unsigned long userptr; + int fd; + } m; + unsigned int data_offset; }; /** @@ -163,43 +204,34 @@ struct vb2_queue; /** * struct vb2_buffer - represents a video buffer - * @v4l2_buf: struct v4l2_buffer associated with this buffer; can - * be read by the driver and relevant entries can be - * changed by the driver in case of CAPTURE types - * (such as timestamp) - * @v4l2_planes: struct v4l2_planes associated with this buffer; can - * be read by the driver and relevant entries can be - * changed by the driver in case of CAPTURE types - * (such as bytesused); NOTE that even for single-planar - * types, the v4l2_planes[0] struct should be used - * instead of v4l2_buf for filling bytesused - drivers - * should use the vb2_set_plane_payload() function for that * @vb2_queue: the queue to which this driver belongs + * @index: id number of the buffer + * @type: buffer type + * @memory: the method, in which the actual data is passed * @num_planes: number of planes in the buffer * on an internal driver queue - * @state: current buffer state; do not change - * @queued_entry: entry on the queued buffers list, which holds all - * buffers queued from userspace - * @done_entry: entry on the list that stores all buffers ready to - * be dequeued to userspace * @planes: private per-plane information; do not change */ struct vb2_buffer { - struct v4l2_buffer v4l2_buf; - struct v4l2_plane v4l2_planes[VIDEO_MAX_PLANES]; - struct vb2_queue *vb2_queue; - + unsigned int index; + unsigned int type; + unsigned int memory; unsigned int num_planes; - -/* Private: internal use only */ + struct vb2_plane planes[VB2_MAX_PLANES]; + + /* private: internal use only + * + * state: current buffer state; do not change + * queued_entry: entry on the queued buffers list, which holds + * all buffers queued from userspace + * done_entry: entry on the list that stores all buffers ready + * to be dequeued to userspace + */ enum vb2_buffer_state state; struct list_head queued_entry; struct list_head done_entry; - - struct vb2_plane planes[VIDEO_MAX_PLANES]; - #ifdef CONFIG_VIDEO_ADV_DEBUG /* * Counters for how often these buffer-related ops are @@ -312,7 +344,7 @@ struct vb2_buffer { * pre-queued buffers before calling STREAMON. */ struct vb2_ops { - int (*queue_setup)(struct vb2_queue *q, const struct v4l2_format *fmt, + int (*queue_setup)(struct vb2_queue *q, const void *parg, unsigned int *num_buffers, unsigned int *num_planes, unsigned int sizes[], void *alloc_ctxs[]); @@ -330,12 +362,19 @@ struct vb2_ops { void (*buf_queue)(struct vb2_buffer *vb); }; -struct v4l2_fh; +struct vb2_buf_ops { + int (*fill_user_buffer)(struct vb2_buffer *vb, void *pb); + int (*fill_vb2_buffer)(struct vb2_buffer *vb, const void *pb, + struct vb2_plane *planes); + int (*set_timestamp)(struct vb2_buffer *vb, const void *pb); +}; /** * struct vb2_queue - a videobuf queue * - * @type: queue type (see V4L2_BUF_TYPE_* in linux/videodev2.h + * @type: private buffer type whose content is defined by the vb2-core + * caller. For example, for V4L2, it should match + * the V4L2_BUF_TYPE_* in include/uapi/linux/videodev2.h * @io_modes: supported io methods (see vb2_io_modes enum) * @fileio_read_once: report EOF after reading the first buffer * @fileio_write_immediately: queue buffer after each write() call @@ -351,10 +390,13 @@ struct v4l2_fh; * drivers to easily associate an owner filehandle with the queue. * @ops: driver-specific callbacks * @mem_ops: memory allocator specific callbacks + * @buf_ops: callbacks to deliver buffer information + * between user-space and kernel-space * @drv_priv: driver private data * @buf_struct_size: size of the driver-specific buffer structure; * "0" indicates the driver doesn't want to use a custom buffer - * structure type, so sizeof(struct vb2_buffer) will is used + * structure type. for example, sizeof(struct vb2_v4l2_buffer) + * will be used for v4l2. * @timestamp_flags: Timestamp flags; V4L2_BUF_FLAG_TIMESTAMP_* and * V4L2_BUF_FLAG_TSTAMP_SRC_* * @gfp_flags: additional gfp flags used when allocating the buffers. @@ -385,6 +427,8 @@ struct v4l2_fh; * @waiting_for_buffers: used in poll() to check if vb2 is still waiting for * buffers. Only set for capture queues if qbuf has not yet been * called since poll() needs to return POLLERR in that situation. + * @is_multiplanar: set if buffer type is multiplanar + * @is_output: set if buffer type is output * @last_buffer_dequeued: used in poll() and DQBUF to immediately return if the * last decoded buffer was already dequeued. Set for capture queues * when a buffer with the V4L2_BUF_FLAG_LAST is dequeued. @@ -392,17 +436,19 @@ struct v4l2_fh; * @threadio: thread io internal data, used only if thread is active */ struct vb2_queue { - enum v4l2_buf_type type; + unsigned int type; unsigned int io_modes; unsigned fileio_read_once:1; unsigned fileio_write_immediately:1; unsigned allow_zero_bytesused:1; struct mutex *lock; - struct v4l2_fh *owner; + void *owner; const struct vb2_ops *ops; const struct vb2_mem_ops *mem_ops; + const struct vb2_buf_ops *buf_ops; + void *drv_priv; unsigned int buf_struct_size; u32 timestamp_flags; @@ -411,8 +457,8 @@ struct vb2_queue { /* private: internal use only */ struct mutex mmap_lock; - enum v4l2_memory memory; - struct vb2_buffer *bufs[VIDEO_MAX_FRAME]; + unsigned int memory; + struct vb2_buffer *bufs[VB2_MAX_FRAME]; unsigned int num_buffers; struct list_head queued_list; @@ -423,13 +469,15 @@ struct vb2_queue { spinlock_t done_lock; wait_queue_head_t done_wq; - void *alloc_ctx[VIDEO_MAX_PLANES]; - unsigned int plane_sizes[VIDEO_MAX_PLANES]; + void *alloc_ctx[VB2_MAX_PLANES]; + unsigned int plane_sizes[VB2_MAX_PLANES]; unsigned int streaming:1; unsigned int start_streaming_called:1; unsigned int error:1; unsigned int waiting_for_buffers:1; + unsigned int is_multiplanar:1; + unsigned int is_output:1; unsigned int last_buffer_dequeued:1; struct vb2_fileio_data *fileio; @@ -455,23 +503,25 @@ void vb2_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state state); void vb2_discard_done(struct vb2_queue *q); int vb2_wait_for_all_buffers(struct vb2_queue *q); -int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b); -int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req); +int vb2_core_querybuf(struct vb2_queue *q, unsigned int index, void *pb); +int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory, + unsigned int *count); +int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory, + unsigned int *count, const void *parg); +int vb2_core_prepare_buf(struct vb2_queue *q, unsigned int index, void *pb); +int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb); +int vb2_core_dqbuf(struct vb2_queue *q, void *pb, bool nonblocking); -int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create); -int vb2_prepare_buf(struct vb2_queue *q, struct v4l2_buffer *b); +int vb2_core_streamon(struct vb2_queue *q, unsigned int type); +int vb2_core_streamoff(struct vb2_queue *q, unsigned int type); -int __must_check vb2_queue_init(struct vb2_queue *q); - -void vb2_queue_release(struct vb2_queue *q); -void vb2_queue_error(struct vb2_queue *q); +int vb2_core_expbuf(struct vb2_queue *q, int *fd, unsigned int type, + unsigned int index, unsigned int plane, unsigned int flags); -int vb2_qbuf(struct vb2_queue *q, struct v4l2_buffer *b); -int vb2_expbuf(struct vb2_queue *q, struct v4l2_exportbuffer *eb); -int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking); +int vb2_core_queue_init(struct vb2_queue *q); +void vb2_core_queue_release(struct vb2_queue *q); -int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type); -int vb2_streamoff(struct vb2_queue *q, enum v4l2_buf_type type); +void vb2_queue_error(struct vb2_queue *q); int vb2_mmap(struct vb2_queue *q, struct vm_area_struct *vma); #ifndef CONFIG_MMU @@ -481,41 +531,6 @@ unsigned long vb2_get_unmapped_area(struct vb2_queue *q, unsigned long pgoff, unsigned long flags); #endif -unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait); -size_t vb2_read(struct vb2_queue *q, char __user *data, size_t count, - loff_t *ppos, int nonblock); -size_t vb2_write(struct vb2_queue *q, const char __user *data, size_t count, - loff_t *ppos, int nonblock); - -/* - * vb2_thread_fnc - callback function for use with vb2_thread - * - * This is called whenever a buffer is dequeued in the thread. - */ -typedef int (*vb2_thread_fnc)(struct vb2_buffer *vb, void *priv); - -/** - * vb2_thread_start() - start a thread for the given queue. - * @q: videobuf queue - * @fnc: callback function - * @priv: priv pointer passed to the callback function - * @thread_name:the name of the thread. This will be prefixed with "vb2-". - * - * This starts a thread that will queue and dequeue until an error occurs - * or @vb2_thread_stop is called. - * - * This function should not be used for anything else but the videobuf2-dvb - * support. If you think you have another good use-case for this, then please - * contact the linux-media mailinglist first. - */ -int vb2_thread_start(struct vb2_queue *q, vb2_thread_fnc fnc, void *priv, - const char *thread_name); - -/** - * vb2_thread_stop() - stop the thread for the given queue. - * @q: videobuf queue - */ -int vb2_thread_stop(struct vb2_queue *q); /** * vb2_is_streaming() - return streaming status of the queue @@ -573,7 +588,7 @@ static inline void vb2_set_plane_payload(struct vb2_buffer *vb, unsigned int plane_no, unsigned long size) { if (plane_no < vb->num_planes) - vb->v4l2_planes[plane_no].bytesused = size; + vb->planes[plane_no].bytesused = size; } /** @@ -585,7 +600,7 @@ static inline unsigned long vb2_get_plane_payload(struct vb2_buffer *vb, unsigned int plane_no) { if (plane_no < vb->num_planes) - return vb->v4l2_planes[plane_no].bytesused; + return vb->planes[plane_no].bytesused; return 0; } @@ -598,7 +613,7 @@ static inline unsigned long vb2_plane_size(struct vb2_buffer *vb, unsigned int plane_no) { if (plane_no < vb->num_planes) - return vb->v4l2_planes[plane_no].length; + return vb->planes[plane_no].length; return 0; } @@ -620,48 +635,4 @@ static inline void vb2_clear_last_buffer_dequeued(struct vb2_queue *q) q->last_buffer_dequeued = false; } -/* - * The following functions are not part of the vb2 core API, but are simple - * helper functions that you can use in your struct v4l2_file_operations, - * struct v4l2_ioctl_ops and struct vb2_ops. They will serialize if vb2_queue->lock - * or video_device->lock is set, and they will set and test vb2_queue->owner - * to check if the calling filehandle is permitted to do the queuing operation. - */ - -/* struct v4l2_ioctl_ops helpers */ - -int vb2_ioctl_reqbufs(struct file *file, void *priv, - struct v4l2_requestbuffers *p); -int vb2_ioctl_create_bufs(struct file *file, void *priv, - struct v4l2_create_buffers *p); -int vb2_ioctl_prepare_buf(struct file *file, void *priv, - struct v4l2_buffer *p); -int vb2_ioctl_querybuf(struct file *file, void *priv, struct v4l2_buffer *p); -int vb2_ioctl_qbuf(struct file *file, void *priv, struct v4l2_buffer *p); -int vb2_ioctl_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p); -int vb2_ioctl_streamon(struct file *file, void *priv, enum v4l2_buf_type i); -int vb2_ioctl_streamoff(struct file *file, void *priv, enum v4l2_buf_type i); -int vb2_ioctl_expbuf(struct file *file, void *priv, - struct v4l2_exportbuffer *p); - -/* struct v4l2_file_operations helpers */ - -int vb2_fop_mmap(struct file *file, struct vm_area_struct *vma); -int vb2_fop_release(struct file *file); -int _vb2_fop_release(struct file *file, struct mutex *lock); -ssize_t vb2_fop_write(struct file *file, const char __user *buf, - size_t count, loff_t *ppos); -ssize_t vb2_fop_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos); -unsigned int vb2_fop_poll(struct file *file, poll_table *wait); -#ifndef CONFIG_MMU -unsigned long vb2_fop_get_unmapped_area(struct file *file, unsigned long addr, - unsigned long len, unsigned long pgoff, unsigned long flags); -#endif - -/* struct vb2_ops helpers, only use if vq->lock is non-NULL. */ - -void vb2_ops_wait_prepare(struct vb2_queue *vq); -void vb2_ops_wait_finish(struct vb2_queue *vq); - #endif /* _MEDIA_VIDEOBUF2_CORE_H */ diff --git a/include/media/videobuf2-dma-contig.h b/include/media/videobuf2-dma-contig.h index 8197f87d6..c33dfa69d 100644 --- a/include/media/videobuf2-dma-contig.h +++ b/include/media/videobuf2-dma-contig.h @@ -13,7 +13,7 @@ #ifndef _MEDIA_VIDEOBUF2_DMA_CONTIG_H #define _MEDIA_VIDEOBUF2_DMA_CONTIG_H -#include +#include #include static inline dma_addr_t diff --git a/include/media/videobuf2-dma-sg.h b/include/media/videobuf2-dma-sg.h index 14ce3068b..8d1083f83 100644 --- a/include/media/videobuf2-dma-sg.h +++ b/include/media/videobuf2-dma-sg.h @@ -13,7 +13,7 @@ #ifndef _MEDIA_VIDEOBUF2_DMA_SG_H #define _MEDIA_VIDEOBUF2_DMA_SG_H -#include +#include static inline struct sg_table *vb2_dma_sg_plane_desc( struct vb2_buffer *vb, unsigned int plane_no) diff --git a/include/media/videobuf2-dvb.h b/include/media/videobuf2-dvb.h index 8f61456f1..5b64c9eac 100644 --- a/include/media/videobuf2-dvb.h +++ b/include/media/videobuf2-dvb.h @@ -6,7 +6,13 @@ #include #include #include -#include + +#include +/* + * TODO: This header file should be replaced with videobuf2-core.h + * Currently, vb2_thread is not a stuff of videobuf2-core, + * since vb2_thread has many dependencies on videobuf2-v4l2. + */ struct vb2_dvb { /* filling that the job of the driver */ diff --git a/include/media/videobuf2-memops.h b/include/media/videobuf2-memops.h index 6513c7ec3..36565c7ac 100644 --- a/include/media/videobuf2-memops.h +++ b/include/media/videobuf2-memops.h @@ -14,7 +14,7 @@ #ifndef _MEDIA_VIDEOBUF2_MEMOPS_H #define _MEDIA_VIDEOBUF2_MEMOPS_H -#include +#include #include /** diff --git a/include/media/videobuf2-v4l2.h b/include/media/videobuf2-v4l2.h new file mode 100644 index 000000000..5abab1e7c --- /dev/null +++ b/include/media/videobuf2-v4l2.h @@ -0,0 +1,149 @@ +/* + * videobuf2-v4l2.h - V4L2 driver helper framework + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ +#ifndef _MEDIA_VIDEOBUF2_V4L2_H +#define _MEDIA_VIDEOBUF2_V4L2_H + +#include +#include + +#if VB2_MAX_FRAME != VIDEO_MAX_FRAME +#error VB2_MAX_FRAME != VIDEO_MAX_FRAME +#endif + +#if VB2_MAX_PLANES != VIDEO_MAX_PLANES +#error VB2_MAX_PLANES != VIDEO_MAX_PLANES +#endif + +/** + * struct vb2_v4l2_buffer - video buffer information for v4l2 + * @vb2_buf: video buffer 2 + * @flags: buffer informational flags + * @field: enum v4l2_field; field order of the image in the buffer + * @timestamp: frame timestamp + * @timecode: frame timecode + * @sequence: sequence count of this frame + * Should contain enough information to be able to cover all the fields + * of struct v4l2_buffer at videodev2.h + */ +struct vb2_v4l2_buffer { + struct vb2_buffer vb2_buf; + + __u32 flags; + __u32 field; + struct timeval timestamp; + struct v4l2_timecode timecode; + __u32 sequence; +}; + +/* + * to_vb2_v4l2_buffer() - cast struct vb2_buffer * to struct vb2_v4l2_buffer * + */ +#define to_vb2_v4l2_buffer(vb) \ + container_of(vb, struct vb2_v4l2_buffer, vb2_buf) + +int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b); +int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req); + +int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create); +int vb2_prepare_buf(struct vb2_queue *q, struct v4l2_buffer *b); + +int vb2_qbuf(struct vb2_queue *q, struct v4l2_buffer *b); +int vb2_expbuf(struct vb2_queue *q, struct v4l2_exportbuffer *eb); +int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking); + +int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type); +int vb2_streamoff(struct vb2_queue *q, enum v4l2_buf_type type); + +int __must_check vb2_queue_init(struct vb2_queue *q); +void vb2_queue_release(struct vb2_queue *q); + +unsigned int vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait); +size_t vb2_read(struct vb2_queue *q, char __user *data, size_t count, + loff_t *ppos, int nonblock); +size_t vb2_write(struct vb2_queue *q, const char __user *data, size_t count, + loff_t *ppos, int nonblock); + +/* + * vb2_thread_fnc - callback function for use with vb2_thread + * + * This is called whenever a buffer is dequeued in the thread. + */ +typedef int (*vb2_thread_fnc)(struct vb2_buffer *vb, void *priv); + +/** + * vb2_thread_start() - start a thread for the given queue. + * @q: videobuf queue + * @fnc: callback function + * @priv: priv pointer passed to the callback function + * @thread_name:the name of the thread. This will be prefixed with "vb2-". + * + * This starts a thread that will queue and dequeue until an error occurs + * or @vb2_thread_stop is called. + * + * This function should not be used for anything else but the videobuf2-dvb + * support. If you think you have another good use-case for this, then please + * contact the linux-media mailinglist first. + */ +int vb2_thread_start(struct vb2_queue *q, vb2_thread_fnc fnc, void *priv, + const char *thread_name); + +/** + * vb2_thread_stop() - stop the thread for the given queue. + * @q: videobuf queue + */ +int vb2_thread_stop(struct vb2_queue *q); + +/* + * The following functions are not part of the vb2 core API, but are simple + * helper functions that you can use in your struct v4l2_file_operations, + * struct v4l2_ioctl_ops and struct vb2_ops. They will serialize if vb2_queue->lock + * or video_device->lock is set, and they will set and test vb2_queue->owner + * to check if the calling filehandle is permitted to do the queuing operation. + */ + +/* struct v4l2_ioctl_ops helpers */ + +int vb2_ioctl_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p); +int vb2_ioctl_create_bufs(struct file *file, void *priv, + struct v4l2_create_buffers *p); +int vb2_ioctl_prepare_buf(struct file *file, void *priv, + struct v4l2_buffer *p); +int vb2_ioctl_querybuf(struct file *file, void *priv, struct v4l2_buffer *p); +int vb2_ioctl_qbuf(struct file *file, void *priv, struct v4l2_buffer *p); +int vb2_ioctl_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p); +int vb2_ioctl_streamon(struct file *file, void *priv, enum v4l2_buf_type i); +int vb2_ioctl_streamoff(struct file *file, void *priv, enum v4l2_buf_type i); +int vb2_ioctl_expbuf(struct file *file, void *priv, + struct v4l2_exportbuffer *p); + +/* struct v4l2_file_operations helpers */ + +int vb2_fop_mmap(struct file *file, struct vm_area_struct *vma); +int vb2_fop_release(struct file *file); +int _vb2_fop_release(struct file *file, struct mutex *lock); +ssize_t vb2_fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos); +ssize_t vb2_fop_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos); +unsigned int vb2_fop_poll(struct file *file, poll_table *wait); +#ifndef CONFIG_MMU +unsigned long vb2_fop_get_unmapped_area(struct file *file, unsigned long addr, + unsigned long len, unsigned long pgoff, unsigned long flags); +#endif + +/* struct vb2_ops helpers, only use if vq->lock is non-NULL. */ + +void vb2_ops_wait_prepare(struct vb2_queue *vq); +void vb2_ops_wait_finish(struct vb2_queue *vq); + +#endif /* _MEDIA_VIDEOBUF2_V4L2_H */ diff --git a/include/media/videobuf2-vmalloc.h b/include/media/videobuf2-vmalloc.h index 93a76b430..a63fe6621 100644 --- a/include/media/videobuf2-vmalloc.h +++ b/include/media/videobuf2-vmalloc.h @@ -13,7 +13,7 @@ #ifndef _MEDIA_VIDEOBUF2_VMALLOC_H #define _MEDIA_VIDEOBUF2_VMALLOC_H -#include +#include extern const struct vb2_mem_ops vb2_vmalloc_memops; -- cgit v1.2.3-54-g00ecf