From 863981e96738983919de841ec669e157e6bdaeb0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Sun, 11 Sep 2016 04:34:46 -0300 Subject: Linux-libre 4.7.1-gnu --- include/uapi/linux/usb/ch9.h | 121 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 121 insertions(+) (limited to 'include/uapi/linux/usb/ch9.h') diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h index d5ce71607..a8acc2476 100644 --- a/include/uapi/linux/usb/ch9.h +++ b/include/uapi/linux/usb/ch9.h @@ -105,6 +105,13 @@ #define USB_REQ_LOOPBACK_DATA_READ 0x16 #define USB_REQ_SET_INTERFACE_DS 0x17 +/* specific requests for USB Power Delivery */ +#define USB_REQ_GET_PARTNER_PDO 20 +#define USB_REQ_GET_BATTERY_STATUS 21 +#define USB_REQ_SET_PDO 22 +#define USB_REQ_GET_VDM 23 +#define USB_REQ_SEND_VDM 24 + /* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, * used by hubs to put ports into a new L1 suspend state, except that it * forgot to define its number ... @@ -165,6 +172,22 @@ #define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */ #define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */ +/* + * Feature selectors from Table 9-8 USB Power Delivery spec + */ +#define USB_DEVICE_BATTERY_WAKE_MASK 40 +#define USB_DEVICE_OS_IS_PD_AWARE 41 +#define USB_DEVICE_POLICY_MODE 42 +#define USB_PORT_PR_SWAP 43 +#define USB_PORT_GOTO_MIN 44 +#define USB_PORT_RETURN_POWER 45 +#define USB_PORT_ACCEPT_PD_REQUEST 46 +#define USB_PORT_REJECT_PD_REQUEST 47 +#define USB_PORT_PORT_PD_RESET 48 +#define USB_PORT_C_PORT_PD_CHANGE 49 +#define USB_PORT_CABLE_PD_RESET 50 +#define USB_DEVICE_CHARGING_POLICY 54 + /** * struct usb_ctrlrequest - SETUP data for a USB device control request * @bRequestType: matches the USB bmRequestType field @@ -913,6 +936,104 @@ struct usb_ssp_cap_descriptor { #define USB_SSP_SUBLINK_SPEED_LSM (0xff << 16) /* Lanespeed mantissa */ } __attribute__((packed)); +/* + * USB Power Delivery Capability Descriptor: + * Defines capabilities for PD + */ +/* Defines the various PD Capabilities of this device */ +#define USB_PD_POWER_DELIVERY_CAPABILITY 0x06 +/* Provides information on each battery supported by the device */ +#define USB_PD_BATTERY_INFO_CAPABILITY 0x07 +/* The Consumer characteristics of a Port on the device */ +#define USB_PD_PD_CONSUMER_PORT_CAPABILITY 0x08 +/* The provider characteristics of a Port on the device */ +#define USB_PD_PD_PROVIDER_PORT_CAPABILITY 0x09 + +struct usb_pd_cap_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; /* set to USB_PD_POWER_DELIVERY_CAPABILITY */ + __u8 bReserved; + __le32 bmAttributes; +#define USB_PD_CAP_BATTERY_CHARGING (1 << 1) /* supports Battery Charging specification */ +#define USB_PD_CAP_USB_PD (1 << 2) /* supports USB Power Delivery specification */ +#define USB_PD_CAP_PROVIDER (1 << 3) /* can provide power */ +#define USB_PD_CAP_CONSUMER (1 << 4) /* can consume power */ +#define USB_PD_CAP_CHARGING_POLICY (1 << 5) /* supports CHARGING_POLICY feature */ +#define USB_PD_CAP_TYPE_C_CURRENT (1 << 6) /* supports power capabilities defined in the USB Type-C Specification */ + +#define USB_PD_CAP_PWR_AC (1 << 8) +#define USB_PD_CAP_PWR_BAT (1 << 9) +#define USB_PD_CAP_PWR_USE_V_BUS (1 << 14) + + __le16 bmProviderPorts; /* Bit zero refers to the UFP of the device */ + __le16 bmConsumerPorts; + __le16 bcdBCVersion; + __le16 bcdPDVersion; + __le16 bcdUSBTypeCVersion; +} __attribute__((packed)); + +struct usb_pd_cap_battery_info_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + /* Index of string descriptor shall contain the user friendly name for this battery */ + __u8 iBattery; + /* Index of string descriptor shall contain the Serial Number String for this battery */ + __u8 iSerial; + __u8 iManufacturer; + __u8 bBatteryId; /* uniquely identifies this battery in status Messages */ + __u8 bReserved; + /* + * Shall contain the Battery Charge value above which this + * battery is considered to be fully charged but not necessarily + * “topped off.” + */ + __le32 dwChargedThreshold; /* in mWh */ + /* + * Shall contain the minimum charge level of this battery such + * that above this threshold, a device can be assured of being + * able to power up successfully (see Battery Charging 1.2). + */ + __le32 dwWeakThreshold; /* in mWh */ + __le32 dwBatteryDesignCapacity; /* in mWh */ + __le32 dwBatteryLastFullchargeCapacity; /* in mWh */ +} __attribute__((packed)); + +struct usb_pd_cap_consumer_port_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bReserved; + __u8 bmCapabilities; +/* port will oerate under: */ +#define USB_PD_CAP_CONSUMER_BC (1 << 0) /* BC */ +#define USB_PD_CAP_CONSUMER_PD (1 << 1) /* PD */ +#define USB_PD_CAP_CONSUMER_TYPE_C (1 << 2) /* USB Type-C Current */ + __le16 wMinVoltage; /* in 50mV units */ + __le16 wMaxVoltage; /* in 50mV units */ + __u16 wReserved; + __le32 dwMaxOperatingPower; /* in 10 mW - operating at steady state */ + __le32 dwMaxPeakPower; /* in 10mW units - operating at peak power */ + __le32 dwMaxPeakPowerTime; /* in 100ms units - duration of peak */ +#define USB_PD_CAP_CONSUMER_UNKNOWN_PEAK_POWER_TIME 0xffff +} __attribute__((packed)); + +struct usb_pd_cap_provider_port_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bReserved1; + __u8 bmCapabilities; +/* port will oerate under: */ +#define USB_PD_CAP_PROVIDER_BC (1 << 0) /* BC */ +#define USB_PD_CAP_PROVIDER_PD (1 << 1) /* PD */ +#define USB_PD_CAP_PROVIDER_TYPE_C (1 << 2) /* USB Type-C Current */ + __u8 bNumOfPDObjects; + __u8 bReserved2; + __le32 wPowerDataObject[]; +} __attribute__((packed)); + /* * Precision time measurement capability descriptor: advertised by devices and * hubs that support PTM -- cgit v1.2.3-54-g00ecf