From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- net/hsr/Kconfig | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 net/hsr/Kconfig (limited to 'net/hsr/Kconfig') diff --git a/net/hsr/Kconfig b/net/hsr/Kconfig new file mode 100644 index 000000000..0d3d70905 --- /dev/null +++ b/net/hsr/Kconfig @@ -0,0 +1,27 @@ +# +# IEC 62439-3 High-availability Seamless Redundancy +# + +config HSR + tristate "High-availability Seamless Redundancy (HSR)" + ---help--- + If you say Y here, then your Linux box will be able to act as a + DANH ("Doubly attached node implementing HSR"). For this to work, + your Linux box needs (at least) two physical Ethernet interfaces, + and it must be connected as a node in a ring network together with + other HSR capable nodes. + + All Ethernet frames sent over the hsr device will be sent in both + directions on the ring (over both slave ports), giving a redundant, + instant fail-over network. Each HSR node in the ring acts like a + bridge for HSR frames, but filters frames that have been forwarded + earlier. + + This code is a "best effort" to comply with the HSR standard as + described in IEC 62439-3:2010 (HSRv0), but no compliancy tests have + been made. + + You need to perform any and all necessary tests yourself before + relying on this code in a safety critical system! + + If unsure, say N. -- cgit v1.2.3-54-g00ecf