From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- sound/soc/codecs/cs4270.c | 766 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 766 insertions(+) create mode 100644 sound/soc/codecs/cs4270.c (limited to 'sound/soc/codecs/cs4270.c') diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c new file mode 100644 index 000000000..e6d4ff9fd --- /dev/null +++ b/sound/soc/codecs/cs4270.c @@ -0,0 +1,766 @@ +/* + * CS4270 ALSA SoC (ASoC) codec driver + * + * Author: Timur Tabi + * + * Copyright 2007-2009 Freescale Semiconductor, Inc. This file is licensed + * under the terms of the GNU General Public License version 2. This + * program is licensed "as is" without any warranty of any kind, whether + * express or implied. + * + * This is an ASoC device driver for the Cirrus Logic CS4270 codec. + * + * Current features/limitations: + * + * - Software mode is supported. Stand-alone mode is not supported. + * - Only I2C is supported, not SPI + * - Support for master and slave mode + * - The machine driver's 'startup' function must call + * cs4270_set_dai_sysclk() with the value of MCLK. + * - Only I2S and left-justified modes are supported + * - Power management is supported + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * The codec isn't really big-endian or little-endian, since the I2S + * interface requires data to be sent serially with the MSbit first. + * However, to support BE and LE I2S devices, we specify both here. That + * way, ALSA will always match the bit patterns. + */ +#define CS4270_FORMATS (SNDRV_PCM_FMTBIT_S8 | \ + SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | \ + SNDRV_PCM_FMTBIT_S18_3LE | SNDRV_PCM_FMTBIT_S18_3BE | \ + SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S20_3BE | \ + SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE | \ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S24_BE) + +/* CS4270 registers addresses */ +#define CS4270_CHIPID 0x01 /* Chip ID */ +#define CS4270_PWRCTL 0x02 /* Power Control */ +#define CS4270_MODE 0x03 /* Mode Control */ +#define CS4270_FORMAT 0x04 /* Serial Format, ADC/DAC Control */ +#define CS4270_TRANS 0x05 /* Transition Control */ +#define CS4270_MUTE 0x06 /* Mute Control */ +#define CS4270_VOLA 0x07 /* DAC Channel A Volume Control */ +#define CS4270_VOLB 0x08 /* DAC Channel B Volume Control */ + +#define CS4270_FIRSTREG 0x01 +#define CS4270_LASTREG 0x08 +#define CS4270_NUMREGS (CS4270_LASTREG - CS4270_FIRSTREG + 1) +#define CS4270_I2C_INCR 0x80 + +/* Bit masks for the CS4270 registers */ +#define CS4270_CHIPID_ID 0xF0 +#define CS4270_CHIPID_REV 0x0F +#define CS4270_PWRCTL_FREEZE 0x80 +#define CS4270_PWRCTL_PDN_ADC 0x20 +#define CS4270_PWRCTL_PDN_DAC 0x02 +#define CS4270_PWRCTL_PDN 0x01 +#define CS4270_PWRCTL_PDN_ALL \ + (CS4270_PWRCTL_PDN_ADC | CS4270_PWRCTL_PDN_DAC | CS4270_PWRCTL_PDN) +#define CS4270_MODE_SPEED_MASK 0x30 +#define CS4270_MODE_1X 0x00 +#define CS4270_MODE_2X 0x10 +#define CS4270_MODE_4X 0x20 +#define CS4270_MODE_SLAVE 0x30 +#define CS4270_MODE_DIV_MASK 0x0E +#define CS4270_MODE_DIV1 0x00 +#define CS4270_MODE_DIV15 0x02 +#define CS4270_MODE_DIV2 0x04 +#define CS4270_MODE_DIV3 0x06 +#define CS4270_MODE_DIV4 0x08 +#define CS4270_MODE_POPGUARD 0x01 +#define CS4270_FORMAT_FREEZE_A 0x80 +#define CS4270_FORMAT_FREEZE_B 0x40 +#define CS4270_FORMAT_LOOPBACK 0x20 +#define CS4270_FORMAT_DAC_MASK 0x18 +#define CS4270_FORMAT_DAC_LJ 0x00 +#define CS4270_FORMAT_DAC_I2S 0x08 +#define CS4270_FORMAT_DAC_RJ16 0x18 +#define CS4270_FORMAT_DAC_RJ24 0x10 +#define CS4270_FORMAT_ADC_MASK 0x01 +#define CS4270_FORMAT_ADC_LJ 0x00 +#define CS4270_FORMAT_ADC_I2S 0x01 +#define CS4270_TRANS_ONE_VOL 0x80 +#define CS4270_TRANS_SOFT 0x40 +#define CS4270_TRANS_ZERO 0x20 +#define CS4270_TRANS_INV_ADC_A 0x08 +#define CS4270_TRANS_INV_ADC_B 0x10 +#define CS4270_TRANS_INV_DAC_A 0x02 +#define CS4270_TRANS_INV_DAC_B 0x04 +#define CS4270_TRANS_DEEMPH 0x01 +#define CS4270_MUTE_AUTO 0x20 +#define CS4270_MUTE_ADC_A 0x08 +#define CS4270_MUTE_ADC_B 0x10 +#define CS4270_MUTE_POLARITY 0x04 +#define CS4270_MUTE_DAC_A 0x01 +#define CS4270_MUTE_DAC_B 0x02 + +/* Power-on default values for the registers + * + * This array contains the power-on default values of the registers, with the + * exception of the "CHIPID" register (01h). The lower four bits of that + * register contain the hardware revision, so it is treated as volatile. + */ +static const struct reg_default cs4270_reg_defaults[] = { + { 2, 0x00 }, + { 3, 0x30 }, + { 4, 0x00 }, + { 5, 0x60 }, + { 6, 0x20 }, + { 7, 0x00 }, + { 8, 0x00 }, +}; + +static const char *supply_names[] = { + "va", "vd", "vlc" +}; + +/* Private data for the CS4270 */ +struct cs4270_private { + struct regmap *regmap; + unsigned int mclk; /* Input frequency of the MCLK pin */ + unsigned int mode; /* The mode (I2S or left-justified) */ + unsigned int slave_mode; + unsigned int manual_mute; + + /* power domain regulators */ + struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)]; +}; + +static const struct snd_soc_dapm_widget cs4270_dapm_widgets[] = { +SND_SOC_DAPM_INPUT("AINL"), +SND_SOC_DAPM_INPUT("AINR"), + +SND_SOC_DAPM_OUTPUT("AOUTL"), +SND_SOC_DAPM_OUTPUT("AOUTR"), +}; + +static const struct snd_soc_dapm_route cs4270_dapm_routes[] = { + { "Capture", NULL, "AINA" }, + { "Capture", NULL, "AINB" }, + + { "AOUTA", NULL, "Playback" }, + { "AOUTB", NULL, "Playback" }, +}; + +/** + * struct cs4270_mode_ratios - clock ratio tables + * @ratio: the ratio of MCLK to the sample rate + * @speed_mode: the Speed Mode bits to set in the Mode Control register for + * this ratio + * @mclk: the Ratio Select bits to set in the Mode Control register for this + * ratio + * + * The data for this chart is taken from Table 5 of the CS4270 reference + * manual. + * + * This table is used to determine how to program the Mode Control register. + * It is also used by cs4270_set_dai_sysclk() to tell ALSA which sampling + * rates the CS4270 currently supports. + * + * @speed_mode is the corresponding bit pattern to be written to the + * MODE bits of the Mode Control Register + * + * @mclk is the corresponding bit pattern to be wirten to the MCLK bits of + * the Mode Control Register. + * + * In situations where a single ratio is represented by multiple speed + * modes, we favor the slowest speed. E.g, for a ratio of 128, we pick + * double-speed instead of quad-speed. However, the CS4270 errata states + * that divide-By-1.5 can cause failures, so we avoid that mode where + * possible. + * + * Errata: There is an errata for the CS4270 where divide-by-1.5 does not + * work if Vd is 3.3V. If this effects you, select the + * CONFIG_SND_SOC_CS4270_VD33_ERRATA Kconfig option, and the driver will + * never select any sample rates that require divide-by-1.5. + */ +struct cs4270_mode_ratios { + unsigned int ratio; + u8 speed_mode; + u8 mclk; +}; + +static struct cs4270_mode_ratios cs4270_mode_ratios[] = { + {64, CS4270_MODE_4X, CS4270_MODE_DIV1}, +#ifndef CONFIG_SND_SOC_CS4270_VD33_ERRATA + {96, CS4270_MODE_4X, CS4270_MODE_DIV15}, +#endif + {128, CS4270_MODE_2X, CS4270_MODE_DIV1}, + {192, CS4270_MODE_4X, CS4270_MODE_DIV3}, + {256, CS4270_MODE_1X, CS4270_MODE_DIV1}, + {384, CS4270_MODE_2X, CS4270_MODE_DIV3}, + {512, CS4270_MODE_1X, CS4270_MODE_DIV2}, + {768, CS4270_MODE_1X, CS4270_MODE_DIV3}, + {1024, CS4270_MODE_1X, CS4270_MODE_DIV4} +}; + +/* The number of MCLK/LRCK ratios supported by the CS4270 */ +#define NUM_MCLK_RATIOS ARRAY_SIZE(cs4270_mode_ratios) + +static bool cs4270_reg_is_readable(struct device *dev, unsigned int reg) +{ + return (reg >= CS4270_FIRSTREG) && (reg <= CS4270_LASTREG); +} + +static bool cs4270_reg_is_volatile(struct device *dev, unsigned int reg) +{ + /* Unreadable registers are considered volatile */ + if ((reg < CS4270_FIRSTREG) || (reg > CS4270_LASTREG)) + return 1; + + return reg == CS4270_CHIPID; +} + +/** + * cs4270_set_dai_sysclk - determine the CS4270 samples rates. + * @codec_dai: the codec DAI + * @clk_id: the clock ID (ignored) + * @freq: the MCLK input frequency + * @dir: the clock direction (ignored) + * + * This function is used to tell the codec driver what the input MCLK + * frequency is. + * + * The value of MCLK is used to determine which sample rates are supported + * by the CS4270. The ratio of MCLK / Fs must be equal to one of nine + * supported values - 64, 96, 128, 192, 256, 384, 512, 768, and 1024. + * + * This function calculates the nine ratios and determines which ones match + * a standard sample rate. If there's a match, then it is added to the list + * of supported sample rates. + * + * This function must be called by the machine driver's 'startup' function, + * otherwise the list of supported sample rates will not be available in + * time for ALSA. + * + * For setups with variable MCLKs, pass 0 as 'freq' argument. This will cause + * theoretically possible sample rates to be enabled. Call it again with a + * proper value set one the external clock is set (most probably you would do + * that from a machine's driver 'hw_param' hook. + */ +static int cs4270_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec); + + cs4270->mclk = freq; + return 0; +} + +/** + * cs4270_set_dai_fmt - configure the codec for the selected audio format + * @codec_dai: the codec DAI + * @format: a SND_SOC_DAIFMT_x value indicating the data format + * + * This function takes a bitmask of SND_SOC_DAIFMT_x bits and programs the + * codec accordingly. + * + * Currently, this function only supports SND_SOC_DAIFMT_I2S and + * SND_SOC_DAIFMT_LEFT_J. The CS4270 codec also supports right-justified + * data for playback only, but ASoC currently does not support different + * formats for playback vs. record. + */ +static int cs4270_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int format) +{ + struct snd_soc_codec *codec = codec_dai->codec; + struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec); + + /* set DAI format */ + switch (format & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_LEFT_J: + cs4270->mode = format & SND_SOC_DAIFMT_FORMAT_MASK; + break; + default: + dev_err(codec->dev, "invalid dai format\n"); + return -EINVAL; + } + + /* set master/slave audio interface */ + switch (format & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + cs4270->slave_mode = 1; + break; + case SND_SOC_DAIFMT_CBM_CFM: + cs4270->slave_mode = 0; + break; + default: + /* all other modes are unsupported by the hardware */ + dev_err(codec->dev, "Unknown master/slave configuration\n"); + return -EINVAL; + } + + return 0; +} + +/** + * cs4270_hw_params - program the CS4270 with the given hardware parameters. + * @substream: the audio stream + * @params: the hardware parameters to set + * @dai: the SOC DAI (ignored) + * + * This function programs the hardware with the values provided. + * Specifically, the sample rate and the data format. + * + * The .ops functions are used to provide board-specific data, like input + * frequencies, to this driver. This function takes that information, + * combines it with the hardware parameters provided, and programs the + * hardware accordingly. + */ +static int cs4270_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_codec *codec = dai->codec; + struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec); + int ret; + unsigned int i; + unsigned int rate; + unsigned int ratio; + int reg; + + /* Figure out which MCLK/LRCK ratio to use */ + + rate = params_rate(params); /* Sampling rate, in Hz */ + ratio = cs4270->mclk / rate; /* MCLK/LRCK ratio */ + + for (i = 0; i < NUM_MCLK_RATIOS; i++) { + if (cs4270_mode_ratios[i].ratio == ratio) + break; + } + + if (i == NUM_MCLK_RATIOS) { + /* We did not find a matching ratio */ + dev_err(codec->dev, "could not find matching ratio\n"); + return -EINVAL; + } + + /* Set the sample rate */ + + reg = snd_soc_read(codec, CS4270_MODE); + reg &= ~(CS4270_MODE_SPEED_MASK | CS4270_MODE_DIV_MASK); + reg |= cs4270_mode_ratios[i].mclk; + + if (cs4270->slave_mode) + reg |= CS4270_MODE_SLAVE; + else + reg |= cs4270_mode_ratios[i].speed_mode; + + ret = snd_soc_write(codec, CS4270_MODE, reg); + if (ret < 0) { + dev_err(codec->dev, "i2c write failed\n"); + return ret; + } + + /* Set the DAI format */ + + reg = snd_soc_read(codec, CS4270_FORMAT); + reg &= ~(CS4270_FORMAT_DAC_MASK | CS4270_FORMAT_ADC_MASK); + + switch (cs4270->mode) { + case SND_SOC_DAIFMT_I2S: + reg |= CS4270_FORMAT_DAC_I2S | CS4270_FORMAT_ADC_I2S; + break; + case SND_SOC_DAIFMT_LEFT_J: + reg |= CS4270_FORMAT_DAC_LJ | CS4270_FORMAT_ADC_LJ; + break; + default: + dev_err(codec->dev, "unknown dai format\n"); + return -EINVAL; + } + + ret = snd_soc_write(codec, CS4270_FORMAT, reg); + if (ret < 0) { + dev_err(codec->dev, "i2c write failed\n"); + return ret; + } + + return ret; +} + +/** + * cs4270_dai_mute - enable/disable the CS4270 external mute + * @dai: the SOC DAI + * @mute: 0 = disable mute, 1 = enable mute + * + * This function toggles the mute bits in the MUTE register. The CS4270's + * mute capability is intended for external muting circuitry, so if the + * board does not have the MUTEA or MUTEB pins connected to such circuitry, + * then this function will do nothing. + */ +static int cs4270_dai_mute(struct snd_soc_dai *dai, int mute) +{ + struct snd_soc_codec *codec = dai->codec; + struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec); + int reg6; + + reg6 = snd_soc_read(codec, CS4270_MUTE); + + if (mute) + reg6 |= CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B; + else { + reg6 &= ~(CS4270_MUTE_DAC_A | CS4270_MUTE_DAC_B); + reg6 |= cs4270->manual_mute; + } + + return snd_soc_write(codec, CS4270_MUTE, reg6); +} + +/** + * cs4270_soc_put_mute - put callback for the 'Master Playback switch' + * alsa control. + * @kcontrol: mixer control + * @ucontrol: control element information + * + * This function basically passes the arguments on to the generic + * snd_soc_put_volsw() function and saves the mute information in + * our private data structure. This is because we want to prevent + * cs4270_dai_mute() neglecting the user's decision to manually + * mute the codec's output. + * + * Returns 0 for success. + */ +static int cs4270_soc_put_mute(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_codec *codec = snd_soc_kcontrol_codec(kcontrol); + struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec); + int left = !ucontrol->value.integer.value[0]; + int right = !ucontrol->value.integer.value[1]; + + cs4270->manual_mute = (left ? CS4270_MUTE_DAC_A : 0) | + (right ? CS4270_MUTE_DAC_B : 0); + + return snd_soc_put_volsw(kcontrol, ucontrol); +} + +/* A list of non-DAPM controls that the CS4270 supports */ +static const struct snd_kcontrol_new cs4270_snd_controls[] = { + SOC_DOUBLE_R("Master Playback Volume", + CS4270_VOLA, CS4270_VOLB, 0, 0xFF, 1), + SOC_SINGLE("Digital Sidetone Switch", CS4270_FORMAT, 5, 1, 0), + SOC_SINGLE("Soft Ramp Switch", CS4270_TRANS, 6, 1, 0), + SOC_SINGLE("Zero Cross Switch", CS4270_TRANS, 5, 1, 0), + SOC_SINGLE("De-emphasis filter", CS4270_TRANS, 0, 1, 0), + SOC_SINGLE("Popguard Switch", CS4270_MODE, 0, 1, 1), + SOC_SINGLE("Auto-Mute Switch", CS4270_MUTE, 5, 1, 0), + SOC_DOUBLE("Master Capture Switch", CS4270_MUTE, 3, 4, 1, 1), + SOC_DOUBLE_EXT("Master Playback Switch", CS4270_MUTE, 0, 1, 1, 1, + snd_soc_get_volsw, cs4270_soc_put_mute), +}; + +static const struct snd_soc_dai_ops cs4270_dai_ops = { + .hw_params = cs4270_hw_params, + .set_sysclk = cs4270_set_dai_sysclk, + .set_fmt = cs4270_set_dai_fmt, + .digital_mute = cs4270_dai_mute, +}; + +static struct snd_soc_dai_driver cs4270_dai = { + .name = "cs4270-hifi", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 4000, + .rate_max = 216000, + .formats = CS4270_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_CONTINUOUS, + .rate_min = 4000, + .rate_max = 216000, + .formats = CS4270_FORMATS, + }, + .ops = &cs4270_dai_ops, +}; + +/** + * cs4270_probe - ASoC probe function + * @pdev: platform device + * + * This function is called when ASoC has all the pieces it needs to + * instantiate a sound driver. + */ +static int cs4270_probe(struct snd_soc_codec *codec) +{ + struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec); + int ret; + + /* Disable auto-mute. This feature appears to be buggy. In some + * situations, auto-mute will not deactivate when it should, so we want + * this feature disabled by default. An application (e.g. alsactl) can + * re-enabled it by using the controls. + */ + ret = snd_soc_update_bits(codec, CS4270_MUTE, CS4270_MUTE_AUTO, 0); + if (ret < 0) { + dev_err(codec->dev, "i2c write failed\n"); + return ret; + } + + /* Disable automatic volume control. The hardware enables, and it + * causes volume change commands to be delayed, sometimes until after + * playback has started. An application (e.g. alsactl) can + * re-enabled it by using the controls. + */ + ret = snd_soc_update_bits(codec, CS4270_TRANS, + CS4270_TRANS_SOFT | CS4270_TRANS_ZERO, 0); + if (ret < 0) { + dev_err(codec->dev, "i2c write failed\n"); + return ret; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies), + cs4270->supplies); + + return ret; +} + +/** + * cs4270_remove - ASoC remove function + * @pdev: platform device + * + * This function is the counterpart to cs4270_probe(). + */ +static int cs4270_remove(struct snd_soc_codec *codec) +{ + struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec); + + regulator_bulk_disable(ARRAY_SIZE(cs4270->supplies), cs4270->supplies); + + return 0; +}; + +#ifdef CONFIG_PM + +/* This suspend/resume implementation can handle both - a simple standby + * where the codec remains powered, and a full suspend, where the voltage + * domain the codec is connected to is teared down and/or any other hardware + * reset condition is asserted. + * + * The codec's own power saving features are enabled in the suspend callback, + * and all registers are written back to the hardware when resuming. + */ + +static int cs4270_soc_suspend(struct snd_soc_codec *codec) +{ + struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec); + int reg, ret; + + reg = snd_soc_read(codec, CS4270_PWRCTL) | CS4270_PWRCTL_PDN_ALL; + if (reg < 0) + return reg; + + ret = snd_soc_write(codec, CS4270_PWRCTL, reg); + if (ret < 0) + return ret; + + regulator_bulk_disable(ARRAY_SIZE(cs4270->supplies), + cs4270->supplies); + + return 0; +} + +static int cs4270_soc_resume(struct snd_soc_codec *codec) +{ + struct cs4270_private *cs4270 = snd_soc_codec_get_drvdata(codec); + int reg, ret; + + ret = regulator_bulk_enable(ARRAY_SIZE(cs4270->supplies), + cs4270->supplies); + if (ret != 0) + return ret; + + /* In case the device was put to hard reset during sleep, we need to + * wait 500ns here before any I2C communication. */ + ndelay(500); + + /* first restore the entire register cache ... */ + regcache_sync(cs4270->regmap); + + /* ... then disable the power-down bits */ + reg = snd_soc_read(codec, CS4270_PWRCTL); + reg &= ~CS4270_PWRCTL_PDN_ALL; + + return snd_soc_write(codec, CS4270_PWRCTL, reg); +} +#else +#define cs4270_soc_suspend NULL +#define cs4270_soc_resume NULL +#endif /* CONFIG_PM */ + +/* + * ASoC codec driver structure + */ +static const struct snd_soc_codec_driver soc_codec_device_cs4270 = { + .probe = cs4270_probe, + .remove = cs4270_remove, + .suspend = cs4270_soc_suspend, + .resume = cs4270_soc_resume, + + .controls = cs4270_snd_controls, + .num_controls = ARRAY_SIZE(cs4270_snd_controls), + .dapm_widgets = cs4270_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(cs4270_dapm_widgets), + .dapm_routes = cs4270_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(cs4270_dapm_routes), +}; + +/* + * cs4270_of_match - the device tree bindings + */ +static const struct of_device_id cs4270_of_match[] = { + { .compatible = "cirrus,cs4270", }, + { } +}; +MODULE_DEVICE_TABLE(of, cs4270_of_match); + +static const struct regmap_config cs4270_regmap = { + .reg_bits = 8, + .val_bits = 8, + .max_register = CS4270_LASTREG, + .reg_defaults = cs4270_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(cs4270_reg_defaults), + .cache_type = REGCACHE_RBTREE, + + .readable_reg = cs4270_reg_is_readable, + .volatile_reg = cs4270_reg_is_volatile, +}; + +/** + * cs4270_i2c_probe - initialize the I2C interface of the CS4270 + * @i2c_client: the I2C client object + * @id: the I2C device ID (ignored) + * + * This function is called whenever the I2C subsystem finds a device that + * matches the device ID given via a prior call to i2c_add_driver(). + */ +static int cs4270_i2c_probe(struct i2c_client *i2c_client, + const struct i2c_device_id *id) +{ + struct device_node *np = i2c_client->dev.of_node; + struct cs4270_private *cs4270; + unsigned int val; + int ret, i; + + cs4270 = devm_kzalloc(&i2c_client->dev, sizeof(struct cs4270_private), + GFP_KERNEL); + if (!cs4270) + return -ENOMEM; + + /* get the power supply regulators */ + for (i = 0; i < ARRAY_SIZE(supply_names); i++) + cs4270->supplies[i].supply = supply_names[i]; + + ret = devm_regulator_bulk_get(&i2c_client->dev, + ARRAY_SIZE(cs4270->supplies), + cs4270->supplies); + if (ret < 0) + return ret; + + /* See if we have a way to bring the codec out of reset */ + if (np) { + enum of_gpio_flags flags; + int gpio = of_get_named_gpio_flags(np, "reset-gpio", 0, &flags); + + if (gpio_is_valid(gpio)) { + ret = devm_gpio_request_one(&i2c_client->dev, gpio, + flags & OF_GPIO_ACTIVE_LOW ? + GPIOF_OUT_INIT_LOW : GPIOF_OUT_INIT_HIGH, + "cs4270 reset"); + if (ret < 0) + return ret; + } + } + + cs4270->regmap = devm_regmap_init_i2c(i2c_client, &cs4270_regmap); + if (IS_ERR(cs4270->regmap)) + return PTR_ERR(cs4270->regmap); + + /* Verify that we have a CS4270 */ + ret = regmap_read(cs4270->regmap, CS4270_CHIPID, &val); + if (ret < 0) { + dev_err(&i2c_client->dev, "failed to read i2c at addr %X\n", + i2c_client->addr); + return ret; + } + /* The top four bits of the chip ID should be 1100. */ + if ((val & 0xF0) != 0xC0) { + dev_err(&i2c_client->dev, "device at addr %X is not a CS4270\n", + i2c_client->addr); + return -ENODEV; + } + + dev_info(&i2c_client->dev, "found device at i2c address %X\n", + i2c_client->addr); + dev_info(&i2c_client->dev, "hardware revision %X\n", val & 0xF); + + i2c_set_clientdata(i2c_client, cs4270); + + ret = snd_soc_register_codec(&i2c_client->dev, + &soc_codec_device_cs4270, &cs4270_dai, 1); + return ret; +} + +/** + * cs4270_i2c_remove - remove an I2C device + * @i2c_client: the I2C client object + * + * This function is the counterpart to cs4270_i2c_probe(). + */ +static int cs4270_i2c_remove(struct i2c_client *i2c_client) +{ + snd_soc_unregister_codec(&i2c_client->dev); + return 0; +} + +/* + * cs4270_id - I2C device IDs supported by this driver + */ +static const struct i2c_device_id cs4270_id[] = { + {"cs4270", 0}, + {} +}; +MODULE_DEVICE_TABLE(i2c, cs4270_id); + +/* + * cs4270_i2c_driver - I2C device identification + * + * This structure tells the I2C subsystem how to identify and support a + * given I2C device type. + */ +static struct i2c_driver cs4270_i2c_driver = { + .driver = { + .name = "cs4270", + .owner = THIS_MODULE, + .of_match_table = cs4270_of_match, + }, + .id_table = cs4270_id, + .probe = cs4270_i2c_probe, + .remove = cs4270_i2c_remove, +}; + +module_i2c_driver(cs4270_i2c_driver); + +MODULE_AUTHOR("Timur Tabi "); +MODULE_DESCRIPTION("Cirrus Logic CS4270 ALSA SoC Codec Driver"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3-54-g00ecf