From 57f0f512b273f60d52568b8c6b77e17f5636edc0 Mon Sep 17 00:00:00 2001 From: André Fabian Silva Delgado Date: Wed, 5 Aug 2015 17:04:01 -0300 Subject: Initial import --- tools/iio/generic_buffer.c | 359 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 359 insertions(+) create mode 100644 tools/iio/generic_buffer.c (limited to 'tools/iio/generic_buffer.c') diff --git a/tools/iio/generic_buffer.c b/tools/iio/generic_buffer.c new file mode 100644 index 000000000..f805493be --- /dev/null +++ b/tools/iio/generic_buffer.c @@ -0,0 +1,359 @@ +/* Industrialio buffer test code. + * + * Copyright (c) 2008 Jonathan Cameron + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is primarily intended as an example application. + * Reads the current buffer setup from sysfs and starts a short capture + * from the specified device, pretty printing the result after appropriate + * conversion. + * + * Command line parameters + * generic_buffer -n -t + * If trigger name is not specified the program assumes you want a dataready + * trigger associated with the device and goes looking for it. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "iio_utils.h" + +/** + * size_from_channelarray() - calculate the storage size of a scan + * @channels: the channel info array + * @num_channels: number of channels + * + * Has the side effect of filling the channels[i].location values used + * in processing the buffer output. + **/ +int size_from_channelarray(struct iio_channel_info *channels, int num_channels) +{ + int bytes = 0; + int i = 0; + + while (i < num_channels) { + if (bytes % channels[i].bytes == 0) + channels[i].location = bytes; + else + channels[i].location = bytes - bytes%channels[i].bytes + + channels[i].bytes; + bytes = channels[i].location + channels[i].bytes; + i++; + } + return bytes; +} + +void print2byte(int input, struct iio_channel_info *info) +{ + /* First swap if incorrect endian */ + if (info->be) + input = be16toh((uint16_t)input); + else + input = le16toh((uint16_t)input); + + /* + * Shift before conversion to avoid sign extension + * of left aligned data + */ + input >>= info->shift; + if (info->is_signed) { + int16_t val = input; + + val &= (1 << info->bits_used) - 1; + val = (int16_t)(val << (16 - info->bits_used)) >> + (16 - info->bits_used); + printf("%05f ", ((float)val + info->offset)*info->scale); + } else { + uint16_t val = input; + + val &= (1 << info->bits_used) - 1; + printf("%05f ", ((float)val + info->offset)*info->scale); + } +} +/** + * process_scan() - print out the values in SI units + * @data: pointer to the start of the scan + * @channels: information about the channels. Note + * size_from_channelarray must have been called first to fill the + * location offsets. + * @num_channels: number of channels + **/ +void process_scan(char *data, + struct iio_channel_info *channels, + int num_channels) +{ + int k; + + for (k = 0; k < num_channels; k++) + switch (channels[k].bytes) { + /* only a few cases implemented so far */ + case 2: + print2byte(*(uint16_t *)(data + channels[k].location), + &channels[k]); + break; + case 4: + if (!channels[k].is_signed) { + uint32_t val = *(uint32_t *) + (data + channels[k].location); + printf("%05f ", ((float)val + + channels[k].offset)* + channels[k].scale); + + } + break; + case 8: + if (channels[k].is_signed) { + int64_t val = *(int64_t *) + (data + + channels[k].location); + if ((val >> channels[k].bits_used) & 1) + val = (val & channels[k].mask) | + ~channels[k].mask; + /* special case for timestamp */ + if (channels[k].scale == 1.0f && + channels[k].offset == 0.0f) + printf("%" PRId64 " ", val); + else + printf("%05f ", ((float)val + + channels[k].offset)* + channels[k].scale); + } + break; + default: + break; + } + printf("\n"); +} + +int main(int argc, char **argv) +{ + unsigned long num_loops = 2; + unsigned long timedelay = 1000000; + unsigned long buf_len = 128; + + int ret, c, i, j, toread; + int fp; + + int num_channels; + char *trigger_name = NULL, *device_name = NULL; + char *dev_dir_name, *buf_dir_name; + + int datardytrigger = 1; + char *data; + ssize_t read_size; + int dev_num, trig_num; + char *buffer_access; + int scan_size; + int noevents = 0; + int notrigger = 0; + char *dummy; + + struct iio_channel_info *channels; + + while ((c = getopt(argc, argv, "l:w:c:et:n:g")) != -1) { + switch (c) { + case 'n': + device_name = optarg; + break; + case 't': + trigger_name = optarg; + datardytrigger = 0; + break; + case 'e': + noevents = 1; + break; + case 'c': + num_loops = strtoul(optarg, &dummy, 10); + break; + case 'w': + timedelay = strtoul(optarg, &dummy, 10); + break; + case 'l': + buf_len = strtoul(optarg, &dummy, 10); + break; + case 'g': + notrigger = 1; + break; + case '?': + return -1; + } + } + + if (device_name == NULL) + return -1; + + /* Find the device requested */ + dev_num = find_type_by_name(device_name, "iio:device"); + if (dev_num < 0) { + printf("Failed to find the %s\n", device_name); + ret = -ENODEV; + goto error_ret; + } + printf("iio device number being used is %d\n", dev_num); + + asprintf(&dev_dir_name, "%siio:device%d", iio_dir, dev_num); + + if (!notrigger) { + if (trigger_name == NULL) { + /* + * Build the trigger name. If it is device associated + * its name is _dev[n] where n matches + * the device number found above. + */ + ret = asprintf(&trigger_name, + "%s-dev%d", device_name, dev_num); + if (ret < 0) { + ret = -ENOMEM; + goto error_ret; + } + } + + /* Verify the trigger exists */ + trig_num = find_type_by_name(trigger_name, "trigger"); + if (trig_num < 0) { + printf("Failed to find the trigger %s\n", trigger_name); + ret = -ENODEV; + goto error_free_triggername; + } + printf("iio trigger number being used is %d\n", trig_num); + } else + printf("trigger-less mode selected\n"); + + /* + * Parse the files in scan_elements to identify what channels are + * present + */ + ret = build_channel_array(dev_dir_name, &channels, &num_channels); + if (ret) { + printf("Problem reading scan element information\n"); + printf("diag %s\n", dev_dir_name); + goto error_free_triggername; + } + + /* + * Construct the directory name for the associated buffer. + * As we know that the lis3l02dq has only one buffer this may + * be built rather than found. + */ + ret = asprintf(&buf_dir_name, + "%siio:device%d/buffer", iio_dir, dev_num); + if (ret < 0) { + ret = -ENOMEM; + goto error_free_triggername; + } + + if (!notrigger) { + printf("%s %s\n", dev_dir_name, trigger_name); + /* Set the device trigger to be the data ready trigger found + * above */ + ret = write_sysfs_string_and_verify("trigger/current_trigger", + dev_dir_name, + trigger_name); + if (ret < 0) { + printf("Failed to write current_trigger file\n"); + goto error_free_buf_dir_name; + } + } + + /* Setup ring buffer parameters */ + ret = write_sysfs_int("length", buf_dir_name, buf_len); + if (ret < 0) + goto error_free_buf_dir_name; + + /* Enable the buffer */ + ret = write_sysfs_int("enable", buf_dir_name, 1); + if (ret < 0) + goto error_free_buf_dir_name; + scan_size = size_from_channelarray(channels, num_channels); + data = malloc(scan_size*buf_len); + if (!data) { + ret = -ENOMEM; + goto error_free_buf_dir_name; + } + + ret = asprintf(&buffer_access, "/dev/iio:device%d", dev_num); + if (ret < 0) { + ret = -ENOMEM; + goto error_free_data; + } + + /* Attempt to open non blocking the access dev */ + fp = open(buffer_access, O_RDONLY | O_NONBLOCK); + if (fp == -1) { /* If it isn't there make the node */ + printf("Failed to open %s\n", buffer_access); + ret = -errno; + goto error_free_buffer_access; + } + + /* Wait for events 10 times */ + for (j = 0; j < num_loops; j++) { + if (!noevents) { + struct pollfd pfd = { + .fd = fp, + .events = POLLIN, + }; + + poll(&pfd, 1, -1); + toread = buf_len; + + } else { + usleep(timedelay); + toread = 64; + } + + read_size = read(fp, + data, + toread*scan_size); + if (read_size < 0) { + if (errno == -EAGAIN) { + printf("nothing available\n"); + continue; + } else + break; + } + for (i = 0; i < read_size/scan_size; i++) + process_scan(data + scan_size*i, + channels, + num_channels); + } + + /* Stop the buffer */ + ret = write_sysfs_int("enable", buf_dir_name, 0); + if (ret < 0) + goto error_close_buffer_access; + + if (!notrigger) + /* Disconnect the trigger - just write a dummy name. */ + write_sysfs_string("trigger/current_trigger", + dev_dir_name, "NULL"); + +error_close_buffer_access: + close(fp); +error_free_data: + free(data); +error_free_buffer_access: + free(buffer_access); +error_free_buf_dir_name: + free(buf_dir_name); +error_free_triggername: + if (datardytrigger) + free(trigger_name); +error_ret: + return ret; +} -- cgit v1.2.3-54-g00ecf