ioctl VIDIOC_DV_TIMINGS_CAP, VIDIOC_SUBDEV_DV_TIMINGS_CAP &manvol; VIDIOC_DV_TIMINGS_CAP VIDIOC_SUBDEV_DV_TIMINGS_CAP The capabilities of the Digital Video receiver/transmitter int ioctl int fd int request struct v4l2_dv_timings_cap *argp fd &fd; request VIDIOC_DV_TIMINGS_CAP, VIDIOC_SUBDEV_DV_TIMINGS_CAP argp To query the capabilities of the DV receiver/transmitter applications initialize the pad field to 0, zero the reserved array of &v4l2-dv-timings-cap; and call the VIDIOC_DV_TIMINGS_CAP ioctl on a video node and the driver will fill in the structure. Note that drivers may return different values after switching the video input or output. When implemented by the driver DV capabilities of subdevices can be queried by calling the VIDIOC_SUBDEV_DV_TIMINGS_CAP ioctl directly on a subdevice node. The capabilities are specific to inputs (for DV receivers) or outputs (for DV transmitters), applications must specify the desired pad number in the &v4l2-dv-timings-cap; pad field and zero the reserved array. Attempts to query capabilities on a pad that doesn't support them will return an &EINVAL;. &cs-str; __u32 min_width Minimum width of the active video in pixels. __u32 max_width Maximum width of the active video in pixels. __u32 min_height Minimum height of the active video in lines. __u32 max_height Maximum height of the active video in lines. __u64 min_pixelclock Minimum pixelclock frequency in Hz. __u64 max_pixelclock Maximum pixelclock frequency in Hz. __u32 standards The video standard(s) supported by the hardware. See for a list of standards. __u32 capabilities Several flags giving more information about the capabilities. See for a description of the flags. __u32 reserved[16] Reserved for future extensions. Drivers must set the array to zero. &cs-str; __u32 type Type of DV timings as listed in . __u32 pad Pad number as reported by the media controller API. This field is only used when operating on a subdevice node. When operating on a video node applications must set this field to zero. __u32 reserved[2] Reserved for future extensions. Drivers and applications must set the array to zero. union &v4l2-bt-timings-cap; bt BT.656/1120 timings capabilities of the hardware. __u32 raw_data[32] &cs-str; Flag Description V4L2_DV_BT_CAP_INTERLACED Interlaced formats are supported. V4L2_DV_BT_CAP_PROGRESSIVE Progressive formats are supported. V4L2_DV_BT_CAP_REDUCED_BLANKING CVT/GTF specific: the timings can make use of reduced blanking (CVT) or the 'Secondary GTF' curve (GTF). V4L2_DV_BT_CAP_CUSTOM Can support non-standard timings, i.e. timings not belonging to the standards set in the standards field. &return-value;