Aufs4 -- advanced multi layered unification filesystem version 4.x http://aufs.sf.net Junjiro R. Okajima 0. Introduction ---------------------------------------- In the early days, aufs was entirely re-designed and re-implemented Unionfs Version 1.x series. Adding many original ideas, approaches, improvements and implementations, it becomes totally different from Unionfs while keeping the basic features. Recently, Unionfs Version 2.x series begin taking some of the same approaches to aufs1's. Unionfs is being developed by Professor Erez Zadok at Stony Brook University and his team. Aufs4 supports linux-4.0 and later, and for linux-3.x series try aufs3. If you want older kernel version support, try aufs2-2.6.git or aufs2-standalone.git repository, aufs1 from CVS on SourceForge. Note: it becomes clear that "Aufs was rejected. Let's give it up." According to Christoph Hellwig, linux rejects all union-type filesystems but UnionMount. PS. Al Viro seems have a plan to merge aufs as well as overlayfs and UnionMount, and he pointed out an issue around a directory mutex lock and aufs addressed it. But it is still unsure whether aufs will be merged (or any other union solution). 1. Features ---------------------------------------- - unite several directories into a single virtual filesystem. The member directory is called as a branch. - you can specify the permission flags to the branch, which are 'readonly', 'readwrite' and 'whiteout-able.' - by upper writable branch, internal copyup and whiteout, files/dirs on readonly branch are modifiable logically. - dynamic branch manipulation, add, del. - etc... Also there are many enhancements in aufs, such as: - test only the highest one for the directory permission (dirperm1) - copyup on open (coo=) - 'move' policy for copy-up between two writable branches, after checking free space. - xattr, acl - readdir(3) in userspace. - keep inode number by external inode number table - keep the timestamps of file/dir in internal copyup operation - seekable directory, supporting NFS readdir. - whiteout is hardlinked in order to reduce the consumption of inodes on branch - do not copyup, nor create a whiteout when it is unnecessary - revert a single systemcall when an error occurs in aufs - remount interface instead of ioctl - maintain /etc/mtab by an external command, /sbin/mount.aufs. - loopback mounted filesystem as a branch - kernel thread for removing the dir who has a plenty of whiteouts - support copyup sparse file (a file which has a 'hole' in it) - default permission flags for branches - selectable permission flags for ro branch, whether whiteout can exist or not - export via NFS. - support /fs/aufs and /aufs. - support multiple writable branches, some policies to select one among multiple writable branches. - a new semantics for link(2) and rename(2) to support multiple writable branches. - no glibc changes are required. - pseudo hardlink (hardlink over branches) - allow a direct access manually to a file on branch, e.g. bypassing aufs. including NFS or remote filesystem branch. - userspace wrapper for pathconf(3)/fpathconf(3) with _PC_LINK_MAX. - and more... Currently these features are dropped temporary from aufs4. See design/08plan.txt in detail. - nested mount, i.e. aufs as readonly no-whiteout branch of another aufs (robr) - statistics of aufs thread (/sys/fs/aufs/stat) Features or just an idea in the future (see also design/*.txt), - reorder the branch index without del/re-add. - permanent xino files for NFSD - an option for refreshing the opened files after add/del branches - light version, without branch manipulation. (unnecessary?) - copyup in userspace - inotify in userspace - readv/writev 2. Download ---------------------------------------- There are three GIT trees for aufs4, aufs4-linux.git, aufs4-standalone.git, and aufs-util.git. Note that there is no "4" in "aufs-util.git." While the aufs-util is always necessary, you need either of aufs4-linux or aufs4-standalone. The aufs4-linux tree includes the whole linux mainline GIT tree, git://git.kernel.org/.../torvalds/linux.git. And you cannot select CONFIG_AUFS_FS=m for this version, eg. you cannot build aufs4 as an external kernel module. Several extra patches are not included in this tree. Only aufs4-standalone tree contains them. They are described in the later section "Configuration and Compilation." On the other hand, the aufs4-standalone tree has only aufs source files and necessary patches, and you can select CONFIG_AUFS_FS=m. But you need to apply all aufs patches manually. You will find GIT branches whose name is in form of "aufs4.x" where "x" represents the linux kernel version, "linux-4.x". For instance, "aufs4.0" is for linux-4.0. For latest "linux-4.x-rcN", use "aufs4.x-rcN" branch. o aufs4-linux tree $ git clone --reference /your/linux/git/tree \ git://github.com/sfjro/aufs4-linux.git aufs4-linux.git - if you don't have linux GIT tree, then remove "--reference ..." $ cd aufs4-linux.git $ git checkout origin/aufs4.0 Or You may want to directly git-pull aufs into your linux GIT tree, and leave the patch-work to GIT. $ cd /your/linux/git/tree $ git remote add aufs4 git://github.com/sfjro/aufs4-linux.git $ git fetch aufs4 $ git checkout -b my4.0 v4.0 $ (add your local change...) $ git pull aufs4 aufs4.0 - now you have v4.0 + your_changes + aufs4.0 in you my4.0 branch. - you may need to solve some conflicts between your_changes and aufs4.0. in this case, git-rerere is recommended so that you can solve the similar conflicts automatically when you upgrade to 4.1 or later in the future. o aufs4-standalone tree $ git clone git://github.com/sfjro/aufs4-standalone.git aufs4-standalone.git $ cd aufs4-standalone.git $ git checkout origin/aufs4.0 o aufs-util tree $ git clone git://git.code.sf.net/p/aufs/aufs-util aufs-util.git - note that the public aufs-util.git is on SourceForge instead of GitHUB. $ cd aufs-util.git $ git checkout origin/aufs4.0 Note: The 4.x-rcN branch is to be used with `rc' kernel versions ONLY. The minor version number, 'x' in '4.x', of aufs may not always follow the minor version number of the kernel. Because changes in the kernel that cause the use of a new minor version number do not always require changes to aufs-util. Since aufs-util has its own minor version number, you may not be able to find a GIT branch in aufs-util for your kernel's exact minor version number. In this case, you should git-checkout the branch for the nearest lower number. For (an unreleased) example: If you are using "linux-4.10" and the "aufs4.10" branch does not exist in aufs-util repository, then "aufs4.9", "aufs4.8" or something numerically smaller is the branch for your kernel. Also you can view all branches by $ git branch -a 3. Configuration and Compilation ---------------------------------------- Make sure you have git-checkout'ed the correct branch. For aufs4-linux tree, - enable CONFIG_AUFS_FS. - set other aufs configurations if necessary. For aufs4-standalone tree, There are several ways to build. 1. - apply ./aufs4-kbuild.patch to your kernel source files. - apply ./aufs4-base.patch too. - apply ./aufs4-mmap.patch too. - apply ./aufs4-standalone.patch too, if you have a plan to set CONFIG_AUFS_FS=m. otherwise you don't need ./aufs4-standalone.patch. - copy ./{Documentation,fs,include/uapi/linux/aufs_type.h} files to your kernel source tree. Never copy $PWD/include/uapi/linux/Kbuild. - enable CONFIG_AUFS_FS, you can select either =m or =y. - and build your kernel as usual. - install the built kernel. Note: Since linux-3.9, every filesystem module requires an alias "fs-". You should make sure that "fs-aufs" is listed in your modules.aliases file if you set CONFIG_AUFS_FS=m. - install the header files too by "make headers_install" to the directory where you specify. By default, it is $PWD/usr. "make help" shows a brief note for headers_install. - and reboot your system. 2. - module only (CONFIG_AUFS_FS=m). - apply ./aufs4-base.patch to your kernel source files. - apply ./aufs4-mmap.patch too. - apply ./aufs4-standalone.patch too. - build your kernel, don't forget "make headers_install", and reboot. - edit ./config.mk and set other aufs configurations if necessary. Note: You should read $PWD/fs/aufs/Kconfig carefully which describes every aufs configurations. - build the module by simple "make". Note: Since linux-3.9, every filesystem module requires an alias "fs-". You should make sure that "fs-aufs" is listed in your modules.aliases file. - you can specify ${KDIR} make variable which points to your kernel source tree. - install the files + run "make install" to install the aufs module, or copy the built $PWD/aufs.ko to /lib/modules/... and run depmod -a (or reboot simply). + run "make install_headers" (instead of headers_install) to install the modified aufs header file (you can specify DESTDIR which is available in aufs standalone version's Makefile only), or copy $PWD/usr/include/linux/aufs_type.h to /usr/include/linux or wherever you like manually. By default, the target directory is $PWD/usr. - no need to apply aufs4-kbuild.patch, nor copying source files to your kernel source tree. Note: The header file aufs_type.h is necessary to build aufs-util as well as "make headers_install" in the kernel source tree. headers_install is subject to be forgotten, but it is essentially necessary, not only for building aufs-util. You may not meet problems without headers_install in some older version though. And then, - read README in aufs-util, build and install it - note that your distribution may contain an obsoleted version of aufs_type.h in /usr/include/linux or something. When you build aufs utilities, make sure that your compiler refers the correct aufs header file which is built by "make headers_install." - if you want to use readdir(3) in userspace or pathconf(3) wrapper, then run "make install_ulib" too. And refer to the aufs manual in detail. There several other patches in aufs4-standalone.git. They are all optional. When you meet some problems, they will help you. - aufs4-loopback.patch Supports a nested loopback mount in a branch-fs. This patch is unnecessary until aufs produces a message like "you may want to try another patch for loopback file". - vfs-ino.patch Modifies a system global kernel internal function get_next_ino() in order to stop assigning 0 for an inode-number. Not directly related to aufs, but recommended generally. - tmpfs-idr.patch Keeps the tmpfs inode number as the lowest value. Effective to reduce the size of aufs XINO files for tmpfs branch. Also it prevents the duplication of inode number, which is important for backup tools and other utilities. When you find aufs XINO files for tmpfs branch growing too much, try this patch. - lockdep-debug.patch Because aufs is not only an ordinary filesystem (callee of VFS), but also a caller of VFS functions for branch filesystems, subclassing of the internal locks for LOCKDEP is necessary. LOCKDEP is a debugging feature of linux kernel. If you enable CONFIG_LOCKDEP, then you will need to apply this debug patch to expand several constant values. If don't know what LOCKDEP, then you don't have apply this patch. 4. Usage ---------------------------------------- At first, make sure aufs-util are installed, and please read the aufs manual, aufs.5 in aufs-util.git tree. $ man -l aufs.5 And then, $ mkdir /tmp/rw /tmp/aufs # mount -t aufs -o br=/tmp/rw:${HOME} none /tmp/aufs Here is another example. The result is equivalent. # mount -t aufs -o br=/tmp/rw=rw:${HOME}=ro none /tmp/aufs Or # mount -t aufs -o br:/tmp/rw none /tmp/aufs # mount -o remount,append:${HOME} /tmp/aufs Then, you can see whole tree of your home dir through /tmp/aufs. If you modify a file under /tmp/aufs, the one on your home directory is not affected, instead the same named file will be newly created under /tmp/rw. And all of your modification to a file will be applied to the one under /tmp/rw. This is called the file based Copy on Write (COW) method. Aufs mount options are described in aufs.5. If you run chroot or something and make your aufs as a root directory, then you need to customize the shutdown script. See the aufs manual in detail. Additionally, there are some sample usages of aufs which are a diskless system with network booting, and LiveCD over NFS. See sample dir in CVS tree on SourceForge. 5. Contact ---------------------------------------- When you have any problems or strange behaviour in aufs, please let me know with: - /proc/mounts (instead of the output of mount(8)) - /sys/module/aufs/* - /sys/fs/aufs/* (if you have them) - /debug/aufs/* (if you have them) - linux kernel version if your kernel is not plain, for example modified by distributor, the url where i can download its source is necessary too. - aufs version which was printed at loading the module or booting the system, instead of the date you downloaded. - configuration (define/undefine CONFIG_AUFS_xxx) - kernel configuration or /proc/config.gz (if you have it) - behaviour which you think to be incorrect - actual operation, reproducible one is better - mailto: aufs-users at lists.sourceforge.net Usually, I don't watch the Public Areas(Bugs, Support Requests, Patches, and Feature Requests) on SourceForge. Please join and write to aufs-users ML. 6. Acknowledgements ---------------------------------------- Thanks to everyone who have tried and are using aufs, whoever have reported a bug or any feedback. Especially donators: Tomas Matejicek(slax.org) made a donation (much more than once). Since Apr 2010, Tomas M (the author of Slax and Linux Live scripts) is making "doubling" donations. Unfortunately I cannot list all of the donators, but I really appreciate. It ends Aug 2010, but the ordinary donation URL is still available. Dai Itasaka made a donation (2007/8). Chuck Smith made a donation (2008/4, 10 and 12). Henk Schoneveld made a donation (2008/9). Chih-Wei Huang, ASUS, CTC donated Eee PC 4G (2008/10). Francois Dupoux made a donation (2008/11). Bruno Cesar Ribas and Luis Carlos Erpen de Bona, C3SL serves public aufs2 GIT tree (2009/2). William Grant made a donation (2009/3). Patrick Lane made a donation (2009/4). The Mail Archive (mail-archive.com) made donations (2009/5). Nippy Networks (Ed Wildgoose) made a donation (2009/7). New Dream Network, LLC (www.dreamhost.com) made a donation (2009/11). Pavel Pronskiy made a donation (2011/2). Iridium and Inmarsat satellite phone retailer (www.mailasail.com), Nippy Networks (Ed Wildgoose) made a donation for hardware (2011/3). Max Lekomcev (DOM-TV project) made a donation (2011/7, 12, 2012/3, 6 and 11). Sam Liddicott made a donation (2011/9). Era Scarecrow made a donation (2013/4). Bor Ratajc made a donation (2013/4). Alessandro Gorreta made a donation (2013/4). POIRETTE Marc made a donation (2013/4). Alessandro Gorreta made a donation (2013/4). lauri kasvandik made a donation (2013/5). "pemasu from Finland" made a donation (2013/7). The Parted Magic Project made a donation (2013/9 and 11). Pavel Barta made a donation (2013/10). Nikolay Pertsev made a donation (2014/5). James B made a donation (2014/7 and 2015/7). Stefano Di Biase made a donation (2014/8). Daniel Epellei made a donation (2015/1). Thank you very much. Donations are always, including future donations, very important and helpful for me to keep on developing aufs. 7. ---------------------------------------- If you are an experienced user, no explanation is needed. Aufs is just a linux filesystem. Enjoy! # Local variables: ; # mode: text; # End: ;