# # kbuild file for firmware/ # # Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a # leading /, it's relative to $(srctree). fwdir := $(subst $(quote),,$(CONFIG_EXTRA_FIRMWARE_DIR)) fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir)) fw-external-y := $(subst $(quote),,$(CONFIG_EXTRA_FIRMWARE)) # There are three cases to care about: # 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should # include the firmware files to include, according to .config # 2. 'make modules_install', which will install firmware for modules, and # _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n # 3. 'make firmware_install', which installs all firmware, unconditionally. # For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be # accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all). # But be aware that the config file might not be included at all. ifdef CONFIG_ACENIC_OMIT_TIGON_I acenic-objs := $(DEBLOBBED) fw-shipped- += $(DEBLOBBED) else acenic-objs := $(DEBLOBBED) $(DEBLOBBED) endif fw-shipped-$(CONFIG_ACENIC) += $(acenic-objs) fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += $(DEBLOBBED) \ $(DEBLOBBED) fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin fw-shipped-$(CONFIG_ATM_AMBASSADOR) += $(DEBLOBBED) fw-shipped-$(CONFIG_BNX2X) += $(DEBLOBBED) \ $(DEBLOBBED) \ $(DEBLOBBED) fw-shipped-$(CONFIG_BNX2) += $(DEBLOBBED) \ $(DEBLOBBED) \ $(DEBLOBBED) \ $(DEBLOBBED) \ $(DEBLOBBED) fw-shipped-$(CONFIG_CASSINI) += $(DEBLOBBED) fw-shipped-$(CONFIG_CHELSIO_T3) += $(DEBLOBBED) \ $(DEBLOBBED) \ $(DEBLOBBED) \ $(DEBLOBBED) \ $(DEBLOBBED) fw-shipped-$(CONFIG_DRM_MGA) += $(DEBLOBBED) $(DEBLOBBED) fw-shipped-$(CONFIG_DRM_R128) += $(DEBLOBBED) fw-shipped-$(CONFIG_DRM_RADEON) += $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += $(DEBLOBBED) fw-shipped-$(CONFIG_E100) += $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) fw-shipped-$(CONFIG_MYRI_SBUS) += $(DEBLOBBED) fw-shipped-$(CONFIG_PCMCIA_PCNET) += $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) fw-shipped-$(CONFIG_PCMCIA_3C589) += $(DEBLOBBED) fw-shipped-$(CONFIG_PCMCIA_3C574) += $(DEBLOBBED) fw-shipped-$(CONFIG_SERIAL_8250_CS) += $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += $(DEBLOBBED) fw-shipped-$(CONFIG_SCSI_ADVANSYS) += $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += $(DEBLOBBED) fw-shipped-$(CONFIG_INFINIBAND_QIB) += $(DEBLOBBED) fw-shipped-$(CONFIG_SND_KORG1212) += $(DEBLOBBED) fw-shipped-$(CONFIG_SND_MAESTRO3) += $(DEBLOBBED) \ $(DEBLOBBED) fw-shipped-$(CONFIG_SND_SB16_CSP) += $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) \ $(DEBLOBBED) \ $(DEBLOBBED) fw-shipped-$(CONFIG_SND_YMFPCI) += $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) fw-shipped-$(CONFIG_SND_WAVEFRONT) += $(DEBLOBBED) fw-shipped-$(CONFIG_TEHUTI) += $(DEBLOBBED) fw-shipped-$(CONFIG_TIGON3) += $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) fw-shipped-$(CONFIG_TYPHOON) += $(DEBLOBBED) fw-shipped-$(CONFIG_USB_EMI26) += $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) fw-shipped-$(CONFIG_USB_EMI62) += $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) fw-shipped-$(CONFIG_USB_KAWETH) += $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) \ $(DEBLOBBED) ifdef CONFIG_FIRMWARE_IN_KERNEL fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += $(DEBLOBBED) fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += $(DEBLOBBED) fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += $(DEBLOBBED) fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += $(DEBLOBBED) fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += $(DEBLOBBED) fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += $(DEBLOBBED) fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += $(DEBLOBBED) fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += $(DEBLOBBED) fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += $(DEBLOBBED) fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += $(DEBLOBBED) fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += $(DEBLOBBED) fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += $(DEBLOBBED) else fw-shipped- += $(DEBLOBBED) $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) $(DEBLOBBED) endif fw-shipped-$(CONFIG_USB_SERIAL_TI) += $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) $(DEBLOBBED) fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += $(DEBLOBBED) $(DEBLOBBED) \ $(DEBLOBBED) $(DEBLOBBED) fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += $(DEBLOBBED) fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += $(DEBLOBBED) $(DEBLOBBED) \ # $(DEBLOBBED) fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw fw-shipped-$(CONFIG_USB_VICAM) += $(DEBLOBBED) fw-shipped-$(CONFIG_VIDEO_CPIA2) += $(DEBLOBBED) fw-shipped-$(CONFIG_YAM) += $(DEBLOBBED) $(DEBLOBBED) fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-) quiet_cmd_ihex = IHEX $@ cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@ quiet_cmd_ihex2fw = IHEX2FW $@ cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@ quiet_cmd_h16tofw = H16TOFW $@ cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@ quiet_cmd_fwbin = MK_FW $@ cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \ FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst \ firmware/%.gen.S,%,$@))))"; \ ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long); \ ASM_ALIGN=$(if $(CONFIG_64BIT),3,2); \ PROGBITS=$(if $(CONFIG_ARM),%,@)progbits; \ echo "/* Generated by firmware/Makefile */" > $@;\ echo " .section .rodata" >>$@;\ echo " .p2align $${ASM_ALIGN}" >>$@;\ echo "_fw_$${FWSTR}_bin:" >>$@;\ echo " .incbin \"$(2)\"" >>$@;\ echo "_fw_end:" >>$@;\ echo " .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\ echo " .p2align $${ASM_ALIGN}" >>$@;\ echo "_fw_$${FWSTR}_name:" >>$@;\ echo " .string \"$$FWNAME\"" >>$@;\ echo " .section .builtin_fw,\"a\",$${PROGBITS}" >>$@;\ echo " .p2align $${ASM_ALIGN}" >>$@;\ echo " $${ASM_WORD} _fw_$${FWSTR}_name" >>$@;\ echo " $${ASM_WORD} _fw_$${FWSTR}_bin" >>$@;\ echo " $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin" >>$@; # One of these files will change, or come into existence, whenever # the configuration changes between 32-bit and 64-bit. The .S files # need to change when that happens. wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \ include/config/ppc32.h include/config/ppc64.h \ include/config/superh32.h include/config/superh64.h \ include/config/x86_32.h include/config/x86_64.h) $(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) $(call cmd,fwbin,$(patsubst %.gen.S,%,$@)) $(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \ include/config/extra/firmware/dir.h $(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@)) # The .o files depend on the binaries directly; the .S files don't. $(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: % $(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/% # .ihex is used just as a simple way to hold binary files in a source tree # where binaries are frowned upon. They are directly converted with objcopy. $(obj)/%: $(obj)/%.ihex $(call cmd,ihex) # Don't depend on ihex2fw if we're installing and it already exists. # Putting it after | in the dependencies doesn't seem sufficient when # we're installing after a cross-compile, because ihex2fw has dependencies # on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and # thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree # is exported read-only for someone to run 'make install'. ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw) ihex2fw_dep := else ihex2fw_dep := $(obj)/ihex2fw endif # .HEX is also Intel HEX, but where the offset and length in each record # is actually meaningful, because the firmware has to be loaded in a certain # order rather than as a single binary blob. Thus, we convert them into our # more compact binary representation of ihex records () $(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) $(call cmd,ihex2fw) # .H16 is our own modified form of Intel HEX, with 16-bit length for records. $(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) $(call cmd,h16tofw) obj-y += $(patsubst %,%.gen.o, $(fw-external-y)) obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y)) ifeq ($(KBUILD_SRC),) # Makefile.build only creates subdirectories for O= builds, but external # firmware might live outside the kernel source tree _dummy := $(foreach d,$(addprefix $(obj)/,$(dir $(fw-external-y))), $(shell [ -d $(d) ] || mkdir -p $(d))) endif # Remove .S files and binaries created from ihex # (during 'make clean' .config isn't included so they're all in $(fw-shipped-)) targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \ $(shell find $(obj) -name \*.gen.S 2>/dev/null)) # Without this, built-in.o won't be created when it's empty, and the # final vmlinux link will fail. obj- := dummy hostprogs-y := ihex2fw