Causes problems with HTML escaping, don't use * % Enabled by default, minor problems with path to query rewrite rules, see below * + Enabled by default, but doesn't work with path to query rewrite rules, corrupted by apache * ? Enabled by default, but doesn't work with path to PATH_INFO rewrites * * All three of these punctuation problems can be avoided by using an alias, instead of a * rewrite rule of either variety. * * The problem with % is that when using a path to query rewrite rule, URLs are * double-unescaped: once by Apache's path conversion code, and again by PHP. So * %253F, for example, becomes "?". Our code does not double-escape to compensate * for this, indeed double escaping would break if the double-escaped title was * passed in the query string rather than the path. This is a minor security issue * because articles can be created such that they are hard to view or edit. * * In some rare cases you may wish to remove + for compatibility with old links. * * Theoretically 0x80-0x9F of ISO 8859-1 should be disallowed, but * this breaks interlanguage links */ $wgLegalTitleChars = " %!\"$&'()*,\\-.\\/0-9:;=?@A-Z\\\\^_`a-z~\\x80-\\xFF+"; /** * The external URL protocols */ $wgUrlProtocols = array( 'http://', 'https://', 'ftp://', 'irc://', 'gopher://', 'telnet://', // Well if we're going to support the above.. -ævar 'nntp://', // @bug 3808 RFC 1738 'worldwind://', 'mailto:', 'news:', 'svn://', ); /** internal name of virus scanner. This servers as a key to the $wgAntivirusSetup array. * Set this to NULL to disable virus scanning. If not null, every file uploaded will be scanned for viruses. */ $wgAntivirus= NULL; /** Configuration for different virus scanners. This an associative array of associative arrays: * it contains on setup array per known scanner type. The entry is selected by $wgAntivirus, i.e. * valid values for $wgAntivirus are the keys defined in this array. * * The configuration array for each scanner contains the following keys: "command", "codemap", "messagepattern"; * * "command" is the full command to call the virus scanner - %f will be replaced with the name of the * file to scan. If not present, the filename will be appended to the command. Note that this must be * overwritten if the scanner is not in the system path; in that case, plase set * $wgAntivirusSetup[$wgAntivirus]['command'] to the desired command with full path. * * "codemap" is a mapping of exit code to return codes of the detectVirus function in SpecialUpload. * An exit code mapped to AV_SCAN_FAILED causes the function to consider the scan to be failed. This will pass * the file if $wgAntivirusRequired is not set. * An exit code mapped to AV_SCAN_ABORTED causes the function to consider the file to have an usupported format, * which is probably imune to virusses. This causes the file to pass. * An exit code mapped to AV_NO_VIRUS will cause the file to pass, meaning no virus was found. * All other codes (like AV_VIRUS_FOUND) will cause the function to report a virus. * You may use "*" as a key in the array to catch all exit codes not mapped otherwise. * * "messagepattern" is a perl regular expression to extract the meaningful part of the scanners * output. The relevant part should be matched as group one (\1). * If not defined or the pattern does not match, the full message is shown to the user. */ $wgAntivirusSetup = array( #setup for clamav 'clamav' => array ( 'command' => "clamscan --no-summary ", 'codemap' => array ( "0" => AV_NO_VIRUS, # no virus "1" => AV_VIRUS_FOUND, # virus found "52" => AV_SCAN_ABORTED, # unsupported file format (probably imune) "*" => AV_SCAN_FAILED, # else scan failed ), 'messagepattern' => '/.*?:(.*)/sim', ), #setup for f-prot 'f-prot' => array ( 'command' => "f-prot ", 'codemap' => array ( "0" => AV_NO_VIRUS, # no virus "3" => AV_VIRUS_FOUND, # virus found "6" => AV_VIRUS_FOUND, # virus found "*" => AV_SCAN_FAILED, # else scan failed ), 'messagepattern' => '/.*?Infection:(.*)$/m', ), ); /** Determines if a failed virus scan (AV_SCAN_FAILED) will cause the file to be rejected. */ $wgAntivirusRequired= true; /** Determines if the mime type of uploaded files should be checked */ $wgVerifyMimeType= true; /** Sets the mime type definition file to use by MimeMagic.php. */ $wgMimeTypeFile= "includes/mime.types"; #$wgMimeTypeFile= "/etc/mime.types"; #$wgMimeTypeFile= NULL; #use built-in defaults only. /** Sets the mime type info file to use by MimeMagic.php. */ $wgMimeInfoFile= "includes/mime.info"; #$wgMimeInfoFile= NULL; #use built-in defaults only. /** Switch for loading the FileInfo extension by PECL at runtime. * This should be used only if fileinfo is installed as a shared object * or a dynamic libary */ $wgLoadFileinfoExtension= false; /** Sets an external mime detector program. The command must print only * the mime type to standard output. * The name of the file to process will be appended to the command given here. * If not set or NULL, mime_content_type will be used if available. */ $wgMimeDetectorCommand= NULL; # use internal mime_content_type function, available since php 4.3.0 #$wgMimeDetectorCommand= "file -bi"; #use external mime detector (Linux) /** Switch for trivial mime detection. Used by thumb.php to disable all fance * things, because only a few types of images are needed and file extensions * can be trusted. */ $wgTrivialMimeDetection= false; /** * Additional XML types we can allow via mime-detection. * array = ( 'rootElement' => 'associatedMimeType' ) */ $wgXMLMimeTypes = array( 'http://www.w3.org/2000/svg:svg' => 'image/svg+xml', 'svg' => 'image/svg+xml', 'http://www.lysator.liu.se/~alla/dia/:diagram' => 'application/x-dia-diagram', 'http://www.w3.org/1999/xhtml:html' => 'text/html', // application/xhtml+xml? 'html' => 'text/html', // application/xhtml+xml? ); /** * To set 'pretty' URL paths for actions other than * plain page views, add to this array. For instance: * 'edit' => "$wgScriptPath/edit/$1" * * There must be an appropriate script or rewrite rule * in place to handle these URLs. */ $wgActionPaths = array(); /** * If you operate multiple wikis, you can define a shared upload path here. * Uploads to this wiki will NOT be put there - they will be put into * $wgUploadDirectory. * If $wgUseSharedUploads is set, the wiki will look in the shared repository if * no file of the given name is found in the local repository (for [[Image:..]], * [[Media:..]] links). Thumbnails will also be looked for and generated in this * directory. * * Note that these configuration settings can now be defined on a per- * repository basis for an arbitrary number of file repositories, using the * $wgForeignFileRepos variable. */ $wgUseSharedUploads = false; /** Full path on the web server where shared uploads can be found */ $wgSharedUploadPath = "http://commons.wikimedia.org/shared/images"; /** Fetch commons image description pages and display them on the local wiki? */ $wgFetchCommonsDescriptions = false; /** Path on the file system where shared uploads can be found. */ $wgSharedUploadDirectory = "/var/www/wiki3/images"; /** DB name with metadata about shared directory. Set this to false if the uploads do not come from a wiki. */ $wgSharedUploadDBname = false; /** Optional table prefix used in database. */ $wgSharedUploadDBprefix = ''; /** Cache shared metadata in memcached. Don't do this if the commons wiki is in a different memcached domain */ $wgCacheSharedUploads = true; /** Allow for upload to be copied from an URL. Requires Special:Upload?source=web */ $wgAllowCopyUploads = false; /** * Max size for uploads, in bytes. Currently only works for uploads from URL * via CURL (see $wgAllowCopyUploads). The only way to impose limits on * normal uploads is currently to edit php.ini. */ $wgMaxUploadSize = 1024*1024*100; # 100MB /** * Point the upload navigation link to an external URL * Useful if you want to use a shared repository by default * without disabling local uploads (use $wgEnableUploads = false for that) * e.g. $wgUploadNavigationUrl = 'http://commons.wikimedia.org/wiki/Special:Upload'; */ $wgUploadNavigationUrl = false; /** * Give a path here to use thumb.php for thumbnail generation on client request, instead of * generating them on render and outputting a static URL. This is necessary if some of your * apache servers don't have read/write access to the thumbnail path. * * Example: * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb{$wgScriptExtension}"; */ $wgThumbnailScriptPath = false; $wgSharedThumbnailScriptPath = false; /** * Set the following to false especially if you have a set of files that need to * be accessible by all wikis, and you do not want to use the hash (path/a/aa/) * directory layout. */ $wgHashedSharedUploadDirectory = true; /** * Base URL for a repository wiki. Leave this blank if uploads are just stored * in a shared directory and not meant to be accessible through a separate wiki. * Otherwise the image description pages on the local wiki will link to the * image description page on this wiki. * * Please specify the namespace, as in the example below. */ $wgRepositoryBaseUrl = "http://commons.wikimedia.org/wiki/Image:"; # # Email settings # /** * Site admin email address * Default to wikiadmin@SERVER_NAME */ $wgEmergencyContact = 'wikiadmin@' . $wgServerName; /** * Password reminder email address * The address we should use as sender when a user is requesting his password * Default to apache@SERVER_NAME */ $wgPasswordSender = 'MediaWiki Mail '; /** * dummy address which should be accepted during mail send action * It might be necessay to adapt the address or to set it equal * to the $wgEmergencyContact address */ #$wgNoReplyAddress = $wgEmergencyContact; $wgNoReplyAddress = 'reply@not.possible'; /** * Set to true to enable the e-mail basic features: * Password reminders, etc. If sending e-mail on your * server doesn't work, you might want to disable this. */ $wgEnableEmail = true; /** * Set to true to enable user-to-user e-mail. * This can potentially be abused, as it's hard to track. */ $wgEnableUserEmail = true; /** * Set to true to put the sending user's email in a Reply-To header * instead of From. ($wgEmergencyContact will be used as From.) * * Some mailers (eg sSMTP) set the SMTP envelope sender to the From value, * which can cause problems with SPF validation and leak recipient addressses * when bounces are sent to the sender. */ $wgUserEmailUseReplyTo = false; /** * Minimum time, in hours, which must elapse between password reminder * emails for a given account. This is to prevent abuse by mail flooding. */ $wgPasswordReminderResendTime = 24; /** * The time, in seconds, when an emailed temporary password expires. */ $wgNewPasswordExpiry = 3600 * 24 * 7; /** * SMTP Mode * For using a direct (authenticated) SMTP server connection. * Default to false or fill an array : * * "host" => 'SMTP domain', * "IDHost" => 'domain for MessageID', * "port" => "25", * "auth" => true/false, * "username" => user, * "password" => password * */ $wgSMTP = false; /**@{ * Database settings */ /** database host name or ip address */ $wgDBserver = 'localhost'; /** database port number (for PostgreSQL) */ $wgDBport = 5432; /** name of the database */ $wgDBname = 'my_wiki'; /** */ $wgDBconnection = ''; /** Database username */ $wgDBuser = 'wikiuser'; /** Database user's password */ $wgDBpassword = ''; /** Database type */ $wgDBtype = 'mysql'; /** Search type * Leave as null to select the default search engine for the * selected database type (eg SearchMySQL), or set to a class * name to override to a custom search engine. */ $wgSearchType = null; /** Table name prefix */ $wgDBprefix = ''; /** MySQL table options to use during installation or update */ $wgDBTableOptions = 'ENGINE=InnoDB'; /** Mediawiki schema */ $wgDBmwschema = 'mediawiki'; /** Tsearch2 schema */ $wgDBts2schema = 'public'; /** To override default SQLite data directory ($docroot/../data) */ $wgSQLiteDataDir = ''; /** Default directory mode for SQLite data directory on creation. * Note that this is different from the default directory mode used * elsewhere. */ $wgSQLiteDataDirMode = 0700; /** * Make all database connections secretly go to localhost. Fool the load balancer * thinking there is an arbitrarily large cluster of servers to connect to. * Useful for debugging. */ $wgAllDBsAreLocalhost = false; /**@}*/ /** Live high performance sites should disable this - some checks acquire giant mysql locks */ $wgCheckDBSchema = true; /** * Shared database for multiple wikis. Commonly used for storing a user table * for single sign-on. The server for this database must be the same as for the * main database. * For backwards compatibility the shared prefix is set to the same as the local * prefix, and the user table is listed in the default list of shared tables. * * $wgSharedTables may be customized with a list of tables to share in the shared * datbase. However it is advised to limit what tables you do share as many of * MediaWiki's tables may have side effects if you try to share them. * EXPERIMENTAL */ $wgSharedDB = null; $wgSharedPrefix = false; # Defaults to $wgDBprefix $wgSharedTables = array( 'user' ); /** * Database load balancer * This is a two-dimensional array, an array of server info structures * Fields are: * host: Host name * dbname: Default database name * user: DB user * password: DB password * type: "mysql" or "postgres" * load: ratio of DB_SLAVE load, must be >=0, the sum of all loads must be >0 * groupLoads: array of load ratios, the key is the query group name. A query may belong * to several groups, the most specific group defined here is used. * * flags: bit field * DBO_DEFAULT -- turns on DBO_TRX only if !$wgCommandLineMode (recommended) * DBO_DEBUG -- equivalent of $wgDebugDumpSql * DBO_TRX -- wrap entire request in a transaction * DBO_IGNORE -- ignore errors (not useful in LocalSettings.php) * DBO_NOBUFFER -- turn off buffering (not useful in LocalSettings.php) * * max lag: (optional) Maximum replication lag before a slave will taken out of rotation * max threads: (optional) Maximum number of running threads * * These and any other user-defined properties will be assigned to the mLBInfo member * variable of the Database object. * * Leave at false to use the single-server variables above. If you set this * variable, the single-server variables will generally be ignored (except * perhaps in some command-line scripts). * * The first server listed in this array (with key 0) will be the master. The * rest of the servers will be slaves. To prevent writes to your slaves due to * accidental misconfiguration or MediaWiki bugs, set read_only=1 on all your * slaves in my.cnf. You can set read_only mode at runtime using: * * SET @@read_only=1; * * Since the effect of writing to a slave is so damaging and difficult to clean * up, we at Wikimedia set read_only=1 in my.cnf on all our DB servers, even * our masters, and then set read_only=0 on masters at runtime. */ $wgDBservers = false; /** * Load balancer factory configuration * To set up a multi-master wiki farm, set the class here to something that * can return a LoadBalancer with an appropriate master on a call to getMainLB(). * The class identified here is responsible for reading $wgDBservers, * $wgDBserver, etc., so overriding it may cause those globals to be ignored. * * The LBFactory_Multi class is provided for this purpose, please see * includes/db/LBFactory_Multi.php for configuration information. */ $wgLBFactoryConf = array( 'class' => 'LBFactory_Simple' ); /** How long to wait for a slave to catch up to the master */ $wgMasterWaitTimeout = 10; /** File to log database errors to */ $wgDBerrorLog = false; /** When to give an error message */ $wgDBClusterTimeout = 10; /** * Scale load balancer polling time so that under overload conditions, the database server * receives a SHOW STATUS query at an average interval of this many microseconds */ $wgDBAvgStatusPoll = 2000; /** Set to true if using InnoDB tables */ $wgDBtransactions = false; /** Set to true for compatibility with extensions that might be checking. * MySQL 3.23.x is no longer supported. */ $wgDBmysql4 = true; /** * Set to true to engage MySQL 4.1/5.0 charset-related features; * for now will just cause sending of 'SET NAMES=utf8' on connect. * * WARNING: THIS IS EXPERIMENTAL! * * May break if you're not using the table defs from mysql5/tables.sql. * May break if you're upgrading an existing wiki if set differently. * Broken symptoms likely to include incorrect behavior with page titles, * usernames, comments etc containing non-ASCII characters. * Might also cause failures on the object cache and other things. * * Even correct usage may cause failures with Unicode supplementary * characters (those not in the Basic Multilingual Plane) unless MySQL * has enhanced their Unicode support. */ $wgDBmysql5 = false; /** * Other wikis on this site, can be administered from a single developer * account. * Array numeric key => database name */ $wgLocalDatabases = array(); /** @{ * Object cache settings * See Defines.php for types */ $wgMainCacheType = CACHE_NONE; $wgMessageCacheType = CACHE_ANYTHING; $wgParserCacheType = CACHE_ANYTHING; /**@}*/ $wgParserCacheExpireTime = 86400; $wgSessionsInMemcached = false; /**@{ * Memcached-specific settings * See docs/memcached.txt */ $wgUseMemCached = false; $wgMemCachedDebug = false; ///< Will be set to false in Setup.php, if the server isn't working $wgMemCachedServers = array( '127.0.0.1:11000' ); $wgMemCachedPersistent = false; /**@}*/ /** * Directory for local copy of message cache, for use in addition to memcached */ $wgLocalMessageCache = false; /** * Defines format of local cache * true - Serialized object * false - PHP source file (Warning - security risk) */ $wgLocalMessageCacheSerialized = true; # Language settings # /** Site language code, should be one of ./languages/Language(.*).php */ $wgLanguageCode = 'en'; /** * Some languages need different word forms, usually for different cases. * Used in Language::convertGrammar(). */ $wgGrammarForms = array(); #$wgGrammarForms['en']['genitive']['car'] = 'car\'s'; /** Treat language links as magic connectors, not inline links */ $wgInterwikiMagic = true; /** Hide interlanguage links from the sidebar */ $wgHideInterlanguageLinks = false; /** List of language names or overrides for default names in Names.php */ $wgExtraLanguageNames = array(); /** We speak UTF-8 all the time now, unless some oddities happen */ $wgInputEncoding = 'UTF-8'; $wgOutputEncoding = 'UTF-8'; $wgEditEncoding = ''; /** * Locale for LC_CTYPE, to work around http://bugs.php.net/bug.php?id=45132 * For Unix-like operating systems, set this to to a locale that has a UTF-8 * character set. Only the character set is relevant. */ $wgShellLocale = 'en_US.utf8'; /** * Set this to eg 'ISO-8859-1' to perform character set * conversion when loading old revisions not marked with * "utf-8" flag. Use this when converting wiki to UTF-8 * without the burdensome mass conversion of old text data. * * NOTE! This DOES NOT touch any fields other than old_text. * Titles, comments, user names, etc still must be converted * en masse in the database before continuing as a UTF-8 wiki. */ $wgLegacyEncoding = false; /** * If set to true, the MediaWiki 1.4 to 1.5 schema conversion will * create stub reference rows in the text table instead of copying * the full text of all current entries from 'cur' to 'text'. * * This will speed up the conversion step for large sites, but * requires that the cur table be kept around for those revisions * to remain viewable. * * maintenance/migrateCurStubs.php can be used to complete the * migration in the background once the wiki is back online. * * This option affects the updaters *only*. Any present cur stub * revisions will be readable at runtime regardless of this setting. */ $wgLegacySchemaConversion = false; $wgMimeType = 'text/html'; $wgJsMimeType = 'text/javascript'; $wgDocType = '-//W3C//DTD XHTML 1.0 Transitional//EN'; $wgDTD = 'http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd'; $wgXhtmlDefaultNamespace = 'http://www.w3.org/1999/xhtml'; /** * Permit other namespaces in addition to the w3.org default. * Use the prefix for the key and the namespace for the value. For * example: * $wgXhtmlNamespaces['svg'] = 'http://www.w3.org/2000/svg'; * Normally we wouldn't have to define this in the root * element, but IE needs it there in some circumstances. */ $wgXhtmlNamespaces = array(); /** Enable to allow rewriting dates in page text. * DOES NOT FORMAT CORRECTLY FOR MOST LANGUAGES */ $wgUseDynamicDates = false; /** Enable dates like 'May 12' instead of '12 May', this only takes effect if * the interface is set to English */ $wgAmericanDates = false; /** * For Hindi and Arabic use local numerals instead of Western style (0-9) * numerals in interface. */ $wgTranslateNumerals = true; /** * Translation using MediaWiki: namespace. * Interface messages will be loaded from the database. */ $wgUseDatabaseMessages = true; /** * Expiry time for the message cache key */ $wgMsgCacheExpiry = 86400; /** * Maximum entry size in the message cache, in bytes */ $wgMaxMsgCacheEntrySize = 10000; /** * If true, serialized versions of the messages arrays will be * read from the 'serialized' subdirectory if they are present. * Set to false to always use the Messages files, regardless of * whether they are up to date or not. */ $wgEnableSerializedMessages = true; /** * Set to false if you are thorough system admin who always remembers to keep * serialized files up to date to save few mtime calls. */ $wgCheckSerialized = true; /** Whether to enable language variant conversion. */ $wgDisableLangConversion = false; /** Whether to enable language variant conversion for links. */ $wgDisableTitleConversion = false; /** Default variant code, if false, the default will be the language code */ $wgDefaultLanguageVariant = false; /** * Show a bar of language selection links in the user login and user * registration forms; edit the "loginlanguagelinks" message to * customise these */ $wgLoginLanguageSelector = false; /** * Whether to use zhdaemon to perform Chinese text processing * zhdaemon is under developement, so normally you don't want to * use it unless for testing */ $wgUseZhdaemon = false; $wgZhdaemonHost="localhost"; $wgZhdaemonPort=2004; # Miscellaneous configuration settings # $wgLocalInterwiki = 'w'; $wgInterwikiExpiry = 10800; # Expiry time for cache of interwiki table /** Interwiki caching settings. $wgInterwikiCache specifies path to constant database file This cdb database is generated by dumpInterwiki from maintenance and has such key formats: dbname:key - a simple key (e.g. enwiki:meta) _sitename:key - site-scope key (e.g. wiktionary:meta) __global:key - global-scope key (e.g. __global:meta) __sites:dbname - site mapping (e.g. __sites:enwiki) Sites mapping just specifies site name, other keys provide "local url" data layout. $wgInterwikiScopes specify number of domains to check for messages: 1 - Just wiki(db)-level 2 - wiki and global levels 3 - site levels $wgInterwikiFallbackSite - if unable to resolve from cache */ $wgInterwikiCache = false; $wgInterwikiScopes = 3; $wgInterwikiFallbackSite = 'wiki'; /** * If local interwikis are set up which allow redirects, * set this regexp to restrict URLs which will be displayed * as 'redirected from' links. * * It might look something like this: * $wgRedirectSources = '!^https?://[a-z-]+\.wikipedia\.org/!'; * * Leave at false to avoid displaying any incoming redirect markers. * This does not affect intra-wiki redirects, which don't change * the URL. */ $wgRedirectSources = false; $wgShowIPinHeader = true; # For non-logged in users $wgMaxSigChars = 255; # Maximum number of Unicode characters in signature $wgMaxArticleSize = 2048; # Maximum article size in kilobytes # Maximum number of bytes in username. You want to run the maintenance # script ./maintenancecheckUsernames.php once you have changed this value $wgMaxNameChars = 255; $wgMaxPPNodeCount = 1000000; # A complexity limit on template expansion /** * Maximum recursion depth for templates within templates. * The current parser adds two levels to the PHP call stack for each template, * and xdebug limits the call stack to 100 by default. So this should hopefully * stop the parser before it hits the xdebug limit. */ $wgMaxTemplateDepth = 40; $wgMaxPPExpandDepth = 40; /** * If true, removes (substitutes) templates in "~~~~" signatures. */ $wgCleanSignatures = true; $wgExtraSubtitle = ''; $wgSiteSupportPage = ''; # A page where you users can receive donations /** * Set this to a string to put the wiki into read-only mode. The text will be * used as an explanation to users. * * This prevents most write operations via the web interface. Cache updates may * still be possible. To prevent database writes completely, use the read_only * option in MySQL. */ $wgReadOnly = null; /*** * If this lock file exists (size > 0), the wiki will be forced into read-only mode. * Its contents will be shown to users as part of the read-only warning * message. */ $wgReadOnlyFile = false; ///< defaults to "{$wgUploadDirectory}/lock_yBgMBwiR"; /** * Filename for debug logging. See http://www.mediawiki.org/wiki/How_to_debug * The debug log file should be not be publicly accessible if it is used, as it * may contain private data. */ $wgDebugLogFile = ''; /** * Prefix for debug log lines */ $wgDebugLogPrefix = ''; /** * If true, instead of redirecting, show a page with a link to the redirect * destination. This allows for the inspection of PHP error messages, and easy * resubmission of form data. For developer use only. */ $wgDebugRedirects = false; /** * If true, log debugging data from action=raw. * This is normally false to avoid overlapping debug entries due to gen=css and * gen=js requests. */ $wgDebugRawPage = false; /** * Send debug data to an HTML comment in the output. * * This may occasionally be useful when supporting a non-technical end-user. It's * more secure than exposing the debug log file to the web, since the output only * contains private data for the current user. But it's not ideal for development * use since data is lost on fatal errors and redirects. */ $wgDebugComments = false; /** Does nothing. Obsolete? */ $wgLogQueries = false; /** * Write SQL queries to the debug log */ $wgDebugDumpSql = false; /** * Set to an array of log group keys to filenames. * If set, wfDebugLog() output for that group will go to that file instead * of the regular $wgDebugLogFile. Useful for enabling selective logging * in production. */ $wgDebugLogGroups = array(); /** * Display debug data at the bottom of the main content area. * * Useful for developers and technical users trying to working on a closed wiki. */ $wgShowDebug = false; /** * Show the contents of $wgHooks in Special:Version */ $wgSpecialVersionShowHooks = false; /** * Whether to show "we're sorry, but there has been a database error" pages. * Displaying errors aids in debugging, but may display information useful * to an attacker. */ $wgShowSQLErrors = false; /** * If true, some error messages will be colorized when running scripts on the * command line; this can aid picking important things out when debugging. * Ignored when running on Windows or when output is redirected to a file. */ $wgColorErrors = true; /** * If set to true, uncaught exceptions will print a complete stack trace * to output. This should only be used for debugging, as it may reveal * private information in function parameters due to PHP's backtrace * formatting. */ $wgShowExceptionDetails = false; /** * Expose backend server host names through the API and various HTML comments */ $wgShowHostnames = false; /** * Use experimental, DMOZ-like category browser */ $wgUseCategoryBrowser = false; /** * Keep parsed pages in a cache (objectcache table, turck, or memcached) * to speed up output of the same page viewed by another user with the * same options. * * This can provide a significant speedup for medium to large pages, * so you probably want to keep it on. Extensions that conflict with the * parser cache should disable the cache on a per-page basis instead. */ $wgEnableParserCache = true; /** * Append a configured value to the parser cache and the sitenotice key so * that they can be kept separate for some class of activity. */ $wgRenderHashAppend = ''; /** * If on, the sidebar navigation links are cached for users with the * current language set. This can save a touch of load on a busy site * by shaving off extra message lookups. * * However it is also fragile: changing the site configuration, or * having a variable $wgArticlePath, can produce broken links that * don't update as expected. */ $wgEnableSidebarCache = false; /** * Expiry time for the sidebar cache, in seconds */ $wgSidebarCacheExpiry = 86400; /** * Under which condition should a page in the main namespace be counted * as a valid article? If $wgUseCommaCount is set to true, it will be * counted if it contains at least one comma. If it is set to false * (default), it will only be counted if it contains at least one [[wiki * link]]. See http://meta.wikimedia.org/wiki/Help:Article_count * * Retroactively changing this variable will not affect * the existing count (cf. maintenance/recount.sql). */ $wgUseCommaCount = false; /** * wgHitcounterUpdateFreq sets how often page counters should be updated, higher * values are easier on the database. A value of 1 causes the counters to be * updated on every hit, any higher value n cause them to update *on average* * every n hits. Should be set to either 1 or something largish, eg 1000, for * maximum efficiency. */ $wgHitcounterUpdateFreq = 1; # Basic user rights and block settings $wgSysopUserBans = true; # Allow sysops to ban logged-in users $wgSysopRangeBans = true; # Allow sysops to ban IP ranges $wgAutoblockExpiry = 86400; # Number of seconds before autoblock entries expire $wgBlockAllowsUTEdit = false; # Default setting for option on block form to allow self talkpage editing whilst blocked $wgSysopEmailBans = true; # Allow sysops to ban users from accessing Emailuser # Pages anonymous user may see as an array, e.g.: # array ( "Main Page", "Wikipedia:Help"); # Special:Userlogin and Special:Resetpass are always whitelisted. # NOTE: This will only work if $wgGroupPermissions['*']['read'] # is false -- see below. Otherwise, ALL pages are accessible, # regardless of this setting. # Also note that this will only protect _pages in the wiki_. # Uploaded files will remain readable. Make your upload # directory name unguessable, or use .htaccess to protect it. $wgWhitelistRead = false; /** * Should editors be required to have a validated e-mail * address before being allowed to edit? */ $wgEmailConfirmToEdit=false; /** * Permission keys given to users in each group. * All users are implicitly in the '*' group including anonymous visitors; * logged-in users are all implicitly in the 'user' group. These will be * combined with the permissions of all groups that a given user is listed * in in the user_groups table. * * Note: Don't set $wgGroupPermissions = array(); unless you know what you're * doing! This will wipe all permissions, and may mean that your users are * unable to perform certain essential tasks or access new functionality * when new permissions are introduced and default grants established. * * Functionality to make pages inaccessible has not been extensively tested * for security. Use at your own risk! * * This replaces wgWhitelistAccount and wgWhitelistEdit */ $wgGroupPermissions = array(); // Implicit group for all visitors $wgGroupPermissions['*']['createaccount'] = true; $wgGroupPermissions['*']['read'] = true; $wgGroupPermissions['*']['edit'] = true; $wgGroupPermissions['*']['createpage'] = true; $wgGroupPermissions['*']['createtalk'] = true; $wgGroupPermissions['*']['writeapi'] = true; // Implicit group for all logged-in accounts $wgGroupPermissions['user']['move'] = true; $wgGroupPermissions['user']['move-subpages'] = true; $wgGroupPermissions['user']['move-rootuserpages'] = true; // can move root userpages //$wgGroupPermissions['user']['movefile'] = true; // Disabled for now due to possible bugs and security concerns $wgGroupPermissions['user']['read'] = true; $wgGroupPermissions['user']['edit'] = true; $wgGroupPermissions['user']['createpage'] = true; $wgGroupPermissions['user']['createtalk'] = true; $wgGroupPermissions['user']['writeapi'] = true; $wgGroupPermissions['user']['upload'] = true; $wgGroupPermissions['user']['reupload'] = true; $wgGroupPermissions['user']['reupload-shared'] = true; $wgGroupPermissions['user']['minoredit'] = true; $wgGroupPermissions['user']['purge'] = true; // can use ?action=purge without clicking "ok" // Implicit group for accounts that pass $wgAutoConfirmAge $wgGroupPermissions['autoconfirmed']['autoconfirmed'] = true; // Users with bot privilege can have their edits hidden // from various log pages by default $wgGroupPermissions['bot']['bot'] = true; $wgGroupPermissions['bot']['autoconfirmed'] = true; $wgGroupPermissions['bot']['nominornewtalk'] = true; $wgGroupPermissions['bot']['autopatrol'] = true; $wgGroupPermissions['bot']['suppressredirect'] = true; $wgGroupPermissions['bot']['apihighlimits'] = true; $wgGroupPermissions['bot']['writeapi'] = true; #$wgGroupPermissions['bot']['editprotected'] = true; // can edit all protected pages without cascade protection enabled // Most extra permission abilities go to this group $wgGroupPermissions['sysop']['block'] = true; $wgGroupPermissions['sysop']['createaccount'] = true; $wgGroupPermissions['sysop']['delete'] = true; $wgGroupPermissions['sysop']['bigdelete'] = true; // can be separately configured for pages with > $wgDeleteRevisionsLimit revs $wgGroupPermissions['sysop']['deletedhistory'] = true; // can view deleted history entries, but not see or restore the text $wgGroupPermissions['sysop']['undelete'] = true; $wgGroupPermissions['sysop']['editinterface'] = true; $wgGroupPermissions['sysop']['editusercssjs'] = true; $wgGroupPermissions['sysop']['import'] = true; $wgGroupPermissions['sysop']['importupload'] = true; $wgGroupPermissions['sysop']['move'] = true; $wgGroupPermissions['sysop']['move-subpages'] = true; $wgGroupPermissions['sysop']['move-rootuserpages'] = true; $wgGroupPermissions['sysop']['patrol'] = true; $wgGroupPermissions['sysop']['autopatrol'] = true; $wgGroupPermissions['sysop']['protect'] = true; $wgGroupPermissions['sysop']['proxyunbannable'] = true; $wgGroupPermissions['sysop']['rollback'] = true; $wgGroupPermissions['sysop']['trackback'] = true; $wgGroupPermissions['sysop']['upload'] = true; $wgGroupPermissions['sysop']['reupload'] = true; $wgGroupPermissions['sysop']['reupload-shared'] = true; $wgGroupPermissions['sysop']['unwatchedpages'] = true; $wgGroupPermissions['sysop']['autoconfirmed'] = true; $wgGroupPermissions['sysop']['upload_by_url'] = true; $wgGroupPermissions['sysop']['ipblock-exempt'] = true; $wgGroupPermissions['sysop']['blockemail'] = true; $wgGroupPermissions['sysop']['markbotedits'] = true; $wgGroupPermissions['sysop']['apihighlimits'] = true; $wgGroupPermissions['sysop']['browsearchive'] = true; $wgGroupPermissions['sysop']['noratelimit'] = true; $wgGroupPermissions['sysop']['movefile'] = true; #$wgGroupPermissions['sysop']['mergehistory'] = true; // Permission to change users' group assignments $wgGroupPermissions['bureaucrat']['userrights'] = true; $wgGroupPermissions['bureaucrat']['noratelimit'] = true; // Permission to change users' groups assignments across wikis #$wgGroupPermissions['bureaucrat']['userrights-interwiki'] = true; // Permission to export pages including linked pages regardless of $wgExportMaxLinkDepth #$wgGroupPermissions['bureaucrat']['override-export-depth'] = true; #$wgGroupPermissions['sysop']['deleterevision'] = true; // To hide usernames from users and Sysops #$wgGroupPermissions['suppress']['hideuser'] = true; // To hide revisions/log items from users and Sysops #$wgGroupPermissions['suppress']['suppressrevision'] = true; // For private suppression log access #$wgGroupPermissions['suppress']['suppressionlog'] = true; /** * The developer group is deprecated, but can be activated if need be * to use the 'lockdb' and 'unlockdb' special pages. Those require * that a lock file be defined and creatable/removable by the web * server. */ # $wgGroupPermissions['developer']['siteadmin'] = true; /** * Implicit groups, aren't shown on Special:Listusers or somewhere else */ $wgImplicitGroups = array( '*', 'user', 'autoconfirmed' ); /** * A map of group names that the user is in, to group names that those users * are allowed to add or revoke. * * Setting the list of groups to add or revoke to true is equivalent to "any group". * * For example, to allow sysops to add themselves to the "bot" group: * * $wgGroupsAddToSelf = array( 'sysop' => array( 'bot' ) ); * * Implicit groups may be used for the source group, for instance: * * $wgGroupsRemoveFromSelf = array( '*' => true ); * * This allows users in the '*' group (i.e. any user) to remove themselves from * any group that they happen to be in. * */ $wgGroupsAddToSelf = array(); $wgGroupsRemoveFromSelf = array(); /** * Set of available actions that can be restricted via action=protect * You probably shouldn't change this. * Translated through restriction-* messages. */ $wgRestrictionTypes = array( 'edit', 'move' ); /** * Rights which can be required for each protection level (via action=protect) * * You can add a new protection level that requires a specific * permission by manipulating this array. The ordering of elements * dictates the order on the protection form's lists. * * '' will be ignored (i.e. unprotected) * 'sysop' is quietly rewritten to 'protect' for backwards compatibility */ $wgRestrictionLevels = array( '', 'autoconfirmed', 'sysop' ); /** * Set the minimum permissions required to edit pages in each * namespace. If you list more than one permission, a user must * have all of them to edit pages in that namespace. * * Note: NS_MEDIAWIKI is implicitly restricted to editinterface. */ $wgNamespaceProtection = array(); /** * Pages in namespaces in this array can not be used as templates. * Elements must be numeric namespace ids. * Among other things, this may be useful to enforce read-restrictions * which may otherwise be bypassed by using the template machanism. */ $wgNonincludableNamespaces = array(); /** * Number of seconds an account is required to age before * it's given the implicit 'autoconfirm' group membership. * This can be used to limit privileges of new accounts. * * Accounts created by earlier versions of the software * may not have a recorded creation date, and will always * be considered to pass the age test. * * When left at 0, all registered accounts will pass. */ $wgAutoConfirmAge = 0; //$wgAutoConfirmAge = 600; // ten minutes //$wgAutoConfirmAge = 3600*24; // one day # Number of edits an account requires before it is autoconfirmed # Passing both this AND the time requirement is needed $wgAutoConfirmCount = 0; //$wgAutoConfirmCount = 50; /** * Automatically add a usergroup to any user who matches certain conditions. * The format is * array( '&' or '|' or '^', cond1, cond2, ... ) * where cond1, cond2, ... are themselves conditions; *OR* * APCOND_EMAILCONFIRMED, *OR* * array( APCOND_EMAILCONFIRMED ), *OR* * array( APCOND_EDITCOUNT, number of edits ), *OR* * array( APCOND_AGE, seconds since registration ), *OR* * array( APCOND_INGROUPS, group1, group2, ... ), *OR* * array( APCOND_ISIP, ip ), *OR* * array( APCOND_IPINRANGE, range ), *OR* * array( APCOND_AGE_FROM_EDIT, seconds since first edit ), *OR* * similar constructs defined by extensions. * * If $wgEmailAuthentication is off, APCOND_EMAILCONFIRMED will be true for any * user who has provided an e-mail address. */ $wgAutopromote = array( 'autoconfirmed' => array( '&', array( APCOND_EDITCOUNT, &$wgAutoConfirmCount ), array( APCOND_AGE, &$wgAutoConfirmAge ), ), ); /** * These settings can be used to give finer control over who can assign which * groups at Special:Userrights. Example configuration: * * // Bureaucrat can add any group * $wgAddGroups['bureaucrat'] = true; * // Bureaucrats can only remove bots and sysops * $wgRemoveGroups['bureaucrat'] = array( 'bot', 'sysop' ); * // Sysops can make bots * $wgAddGroups['sysop'] = array( 'bot' ); * // Sysops can disable other sysops in an emergency, and disable bots * $wgRemoveGroups['sysop'] = array( 'sysop', 'bot' ); */ $wgAddGroups = array(); $wgRemoveGroups = array(); /** * A list of available rights, in addition to the ones defined by the core. * For extensions only. */ $wgAvailableRights = array(); /** * Optional to restrict deletion of pages with higher revision counts * to users with the 'bigdelete' permission. (Default given to sysops.) */ $wgDeleteRevisionsLimit = 0; /** * Used to figure out if a user is "active" or not. User::isActiveEditor() * sees if a user has made at least $wgActiveUserEditCount number of edits * within the last $wgActiveUserDays days. */ $wgActiveUserEditCount = 30; $wgActiveUserDays = 30; # Proxy scanner settings # /** * If you enable this, every editor's IP address will be scanned for open HTTP * proxies. * * Don't enable this. Many sysops will report "hostile TCP port scans" to your * ISP and ask for your server to be shut down. * * You have been warned. */ $wgBlockOpenProxies = false; /** Port we want to scan for a proxy */ $wgProxyPorts = array( 80, 81, 1080, 3128, 6588, 8000, 8080, 8888, 65506 ); /** Script used to scan */ $wgProxyScriptPath = "$IP/includes/proxy_check.php"; /** */ $wgProxyMemcExpiry = 86400; /** This should always be customised in LocalSettings.php */ $wgSecretKey = false; /** big list of banned IP addresses, in the keys not the values */ $wgProxyList = array(); /** deprecated */ $wgProxyKey = false; /** Number of accounts each IP address may create, 0 to disable. * Requires memcached */ $wgAccountCreationThrottle = 0; # Client-side caching: /** Allow client-side caching of pages */ $wgCachePages = true; /** * Set this to current time to invalidate all prior cached pages. Affects both * client- and server-side caching. * You can get the current date on your server by using the command: * date +%Y%m%d%H%M%S */ $wgCacheEpoch = '20030516000000'; /** * Bump this number when changing the global style sheets and JavaScript. * It should be appended in the query string of static CSS and JS includes, * to ensure that client-side caches don't keep obsolete copies of global * styles. */ $wgStyleVersion = '207'; # Server-side caching: /** * This will cache static pages for non-logged-in users to reduce * database traffic on public sites. * Must set $wgShowIPinHeader = false */ $wgUseFileCache = false; /** Directory where the cached page will be saved */ $wgFileCacheDirectory = false; ///< defaults to "{$wgUploadDirectory}/cache"; /** * When using the file cache, we can store the cached HTML gzipped to save disk * space. Pages will then also be served compressed to clients that support it. * THIS IS NOT COMPATIBLE with ob_gzhandler which is now enabled if supported in * the default LocalSettings.php! If you enable this, remove that setting first. * * Requires zlib support enabled in PHP. */ $wgUseGzip = false; /** Whether MediaWiki should send an ETag header */ $wgUseETag = false; # Email notification settings # /** For email notification on page changes */ $wgPasswordSender = $wgEmergencyContact; # true: from page editor if s/he opted-in # false: Enotif mails appear to come from $wgEmergencyContact $wgEnotifFromEditor = false; // TODO move UPO to preferences probably ? # If set to true, users get a corresponding option in their preferences and can choose to enable or disable at their discretion # If set to false, the corresponding input form on the user preference page is suppressed # It call this to be a "user-preferences-option (UPO)" $wgEmailAuthentication = true; # UPO (if this is set to false, texts referring to authentication are suppressed) $wgEnotifWatchlist = false; # UPO $wgEnotifUserTalk = false; # UPO $wgEnotifRevealEditorAddress = false; # UPO; reply-to address may be filled with page editor's address (if user allowed this in the preferences) $wgEnotifMinorEdits = true; # UPO; false: "minor edits" on pages do not trigger notification mails. # # Attention: _every_ change on a user_talk page trigger a notification mail (if the user is not yet notified) # Send a generic mail instead of a personalised mail for each user. This # always uses UTC as the time zone, and doesn't include the username. # # For pages with many users watching, this can significantly reduce mail load. # Has no effect when using sendmail rather than SMTP; $wgEnotifImpersonal = false; # Maximum number of users to mail at once when using impersonal mail. Should # match the limit on your mail server. $wgEnotifMaxRecips = 500; # Send mails via the job queue. $wgEnotifUseJobQ = false; # Use real name instead of username in e-mail "from" field $wgEnotifUseRealName = false; /** * Array of usernames who will be sent a notification email for every change which occurs on a wiki */ $wgUsersNotifiedOnAllChanges = array(); /** Show watching users in recent changes, watchlist and page history views */ $wgRCShowWatchingUsers = false; # UPO /** Show watching users in Page views */ $wgPageShowWatchingUsers = false; /** Show the amount of changed characters in recent changes */ $wgRCShowChangedSize = true; /** * If the difference between the character counts of the text * before and after the edit is below that value, the value will be * highlighted on the RC page. */ $wgRCChangedSizeThreshold = 500; /** * Show "Updated (since my last visit)" marker in RC view, watchlist and history * view for watched pages with new changes */ $wgShowUpdatedMarker = true; /** * Default cookie expiration time. Setting to 0 makes all cookies session-only. */ $wgCookieExpiration = 30*86400; /** Clock skew or the one-second resolution of time() can occasionally cause cache * problems when the user requests two pages within a short period of time. This * variable adds a given number of seconds to vulnerable timestamps, thereby giving * a grace period. */ $wgClockSkewFudge = 5; # Squid-related settings # /** Enable/disable Squid */ $wgUseSquid = false; /** If you run Squid3 with ESI support, enable this (default:false): */ $wgUseESI = false; /** Internal server name as known to Squid, if different */ # $wgInternalServer = 'http://yourinternal.tld:8000'; $wgInternalServer = $wgServer; /** * Cache timeout for the squid, will be sent as s-maxage (without ESI) or * Surrogate-Control (with ESI). Without ESI, you should strip out s-maxage in * the Squid config. 18000 seconds = 5 hours, more cache hits with 2678400 = 31 * days */ $wgSquidMaxage = 18000; /** * Default maximum age for raw CSS/JS accesses */ $wgForcedRawSMaxage = 300; /** * List of proxy servers to purge on changes; default port is 80. Use IP addresses. * * When MediaWiki is running behind a proxy, it will trust X-Forwarded-For * headers sent/modified from these proxies when obtaining the remote IP address * * For a list of trusted servers which *aren't* purged, see $wgSquidServersNoPurge. */ $wgSquidServers = array(); /** * As above, except these servers aren't purged on page changes; use to set a * list of trusted proxies, etc. */ $wgSquidServersNoPurge = array(); /** Maximum number of titles to purge in any one client operation */ $wgMaxSquidPurgeTitles = 400; /** HTCP multicast purging */ $wgHTCPPort = 4827; $wgHTCPMulticastTTL = 1; # $wgHTCPMulticastAddress = "224.0.0.85"; $wgHTCPMulticastAddress = false; /** Should forwarded Private IPs be accepted? */ $wgUsePrivateIPs = false; # Cookie settings: # /** * Set to set an explicit domain on the login cookies eg, "justthis.domain. org" * or ".any.subdomain.net" */ $wgCookieDomain = ''; $wgCookiePath = '/'; $wgCookieSecure = ($wgProto == 'https'); $wgDisableCookieCheck = false; /** * Set $wgCookiePrefix to use a custom one. Setting to false sets the default of * using the database name. */ $wgCookiePrefix = false; /** * Set authentication cookies to HttpOnly to prevent access by JavaScript, * in browsers that support this feature. This can mitigates some classes of * XSS attack. * * Only supported on PHP 5.2 or higher. */ $wgCookieHttpOnly = version_compare("5.2", PHP_VERSION, "<"); /** * If the requesting browser matches a regex in this blacklist, we won't * send it cookies with HttpOnly mode, even if $wgCookieHttpOnly is on. */ $wgHttpOnlyBlacklist = array( // Internet Explorer for Mac; sometimes the cookies work, sometimes // they don't. It's difficult to predict, as combinations of path // and expiration options affect its parsing. '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/', ); /** A list of cookies that vary the cache (for use by extensions) */ $wgCacheVaryCookies = array(); /** Override to customise the session name */ $wgSessionName = false; /** Whether to allow inline image pointing to other websites */ $wgAllowExternalImages = false; /** If the above is false, you can specify an exception here. Image URLs * that start with this string are then rendered, while all others are not. * You can use this to set up a trusted, simple repository of images. * You may also specify an array of strings to allow multiple sites * * Examples: * $wgAllowExternalImagesFrom = 'http://127.0.0.1/'; * $wgAllowExternalImagesFrom = array( 'http://127.0.0.1/', 'http://example.com' ); */ $wgAllowExternalImagesFrom = ''; /** If $wgAllowExternalImages is false, you can allow an on-wiki * whitelist of regular expression fragments to match the image URL * against. If the image matches one of the regular expression fragments, * The image will be displayed. * * Set this to true to enable the on-wiki whitelist (MediaWiki:External image whitelist) * Or false to disable it */ $wgEnableImageWhitelist = true; /** Allows to move images and other media files */ $wgAllowImageMoving = true; /** Disable database-intensive features */ $wgMiserMode = false; /** Disable all query pages if miser mode is on, not just some */ $wgDisableQueryPages = false; /** Number of rows to cache in 'querycache' table when miser mode is on */ $wgQueryCacheLimit = 1000; /** Number of links to a page required before it is deemed "wanted" */ $wgWantedPagesThreshold = 1; /** Enable slow parser functions */ $wgAllowSlowParserFunctions = false; /** * Maps jobs to their handling classes; extensions * can add to this to provide custom jobs */ $wgJobClasses = array( 'refreshLinks' => 'RefreshLinksJob', 'refreshLinks2' => 'RefreshLinksJob2', 'htmlCacheUpdate' => 'HTMLCacheUpdateJob', 'html_cache_update' => 'HTMLCacheUpdateJob', // backwards-compatible 'sendMail' => 'EmaillingJob', 'enotifNotify' => 'EnotifNotifyJob', 'fixDoubleRedirect' => 'DoubleRedirectJob', ); /** * Additional functions to be performed with updateSpecialPages. * Expensive Querypages are already updated. */ $wgSpecialPageCacheUpdates = array( 'Statistics' => array('SiteStatsUpdate','cacheUpdate') ); /** * To use inline TeX, you need to compile 'texvc' (in the 'math' subdirectory of * the MediaWiki package and have latex, dvips, gs (ghostscript), andconvert * (ImageMagick) installed and available in the PATH. * Please see math/README for more information. */ $wgUseTeX = false; /** Location of the texvc binary */ $wgTexvc = './math/texvc'; # # Profiling / debugging # # You have to create a 'profiling' table in your database before using # profiling see maintenance/archives/patch-profiling.sql . # # To enable profiling, edit StartProfiler.php /** Only record profiling info for pages that took longer than this */ $wgProfileLimit = 0.0; /** Don't put non-profiling info into log file */ $wgProfileOnly = false; /** Log sums from profiling into "profiling" table in db. */ $wgProfileToDatabase = false; /** If true, print a raw call tree instead of per-function report */ $wgProfileCallTree = false; /** Should application server host be put into profiling table */ $wgProfilePerHost = false; /** Settings for UDP profiler */ $wgUDPProfilerHost = '127.0.0.1'; $wgUDPProfilerPort = '3811'; /** Detects non-matching wfProfileIn/wfProfileOut calls */ $wgDebugProfiling = false; /** Output debug message on every wfProfileIn/wfProfileOut */ $wgDebugFunctionEntry = 0; /** Lots of debugging output from SquidUpdate.php */ $wgDebugSquid = false; /* * Destination for wfIncrStats() data... * 'cache' to go into the system cache, if enabled (memcached) * 'udp' to be sent to the UDP profiler (see $wgUDPProfilerHost) * false to disable */ $wgStatsMethod = 'cache'; /** Whereas to count the number of time an article is viewed. * Does not work if pages are cached (for example with squid). */ $wgDisableCounters = false; $wgDisableTextSearch = false; $wgDisableSearchContext = false; /** * Set to true to have nicer highligted text in search results, * by default off due to execution overhead */ $wgAdvancedSearchHighlighting = false; /** * Regexp to match word boundaries, defaults for non-CJK languages * should be empty for CJK since the words are not separate */ $wgSearchHighlightBoundaries = version_compare("5.1", PHP_VERSION, "<")? '[\p{Z}\p{P}\p{C}]' : '[ ,.;:!?~!@#$%\^&*\(\)+=\-\\|\[\]"\'<>\n\r\/{}]'; // PHP 5.0 workaround /** * Template for OpenSearch suggestions, defaults to API action=opensearch * * Sites with heavy load would tipically have these point to a custom * PHP wrapper to avoid firing up mediawiki for every keystroke * * Placeholders: {searchTerms} * */ $wgOpenSearchTemplate = false; /** * Enable suggestions while typing in search boxes * (results are passed around in OpenSearch format) */ $wgEnableMWSuggest = false; /** * Template for internal MediaWiki suggestion engine, defaults to API action=opensearch * * Placeholders: {searchTerms}, {namespaces}, {dbname} * */ $wgMWSuggestTemplate = false; /** * If you've disabled search semi-permanently, this also disables updates to the * table. If you ever re-enable, be sure to rebuild the search table. */ $wgDisableSearchUpdate = false; /** Uploads have to be specially set up to be secure */ $wgEnableUploads = false; /** * Show EXIF data, on by default if available. * Requires PHP's EXIF extension: http://www.php.net/manual/en/ref.exif.php * * NOTE FOR WINDOWS USERS: * To enable EXIF functions, add the folloing lines to the * "Windows extensions" section of php.ini: * * extension=extensions/php_mbstring.dll * extension=extensions/php_exif.dll */ $wgShowEXIF = function_exists( 'exif_read_data' ); /** * Set to true to enable the upload _link_ while local uploads are disabled. * Assumes that the special page link will be bounced to another server where * uploads do work. */ $wgRemoteUploads = false; $wgDisableAnonTalk = false; /** * Do DELETE/INSERT for link updates instead of incremental */ $wgUseDumbLinkUpdate = false; /** * Anti-lock flags - bitfield * ALF_PRELOAD_LINKS * Preload links during link update for save * ALF_PRELOAD_EXISTENCE * Preload cur_id during replaceLinkHolders * ALF_NO_LINK_LOCK * Don't use locking reads when updating the link table. This is * necessary for wikis with a high edit rate for performance * reasons, but may cause link table inconsistency * ALF_NO_BLOCK_LOCK * As for ALF_LINK_LOCK, this flag is a necessity for high-traffic * wikis. */ $wgAntiLockFlags = 0; /** * Path to the GNU diff3 utility. If the file doesn't exist, edit conflicts will * fall back to the old behaviour (no merging). */ $wgDiff3 = '/usr/bin/diff3'; /** * Path to the GNU diff utility. */ $wgDiff = '/usr/bin/diff'; /** * We can also compress text stored in the 'text' table. If this is set on, new * revisions will be compressed on page save if zlib support is available. Any * compressed revisions will be decompressed on load regardless of this setting * *but will not be readable at all* if zlib support is not available. */ $wgCompressRevisions = false; /** * This is the list of preferred extensions for uploading files. Uploading files * with extensions not in this list will trigger a warning. */ $wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg' ); /** Files with these extensions will never be allowed as uploads. */ $wgFileBlacklist = array( # HTML may contain cookie-stealing JavaScript and web bugs 'html', 'htm', 'js', 'jsb', 'mhtml', 'mht', # PHP scripts may execute arbitrary code on the server 'php', 'phtml', 'php3', 'php4', 'php5', 'phps', # Other types that may be interpreted by some servers 'shtml', 'jhtml', 'pl', 'py', 'cgi', # May contain harmful executables for Windows victims 'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' ); /** Files with these mime types will never be allowed as uploads * if $wgVerifyMimeType is enabled. */ $wgMimeTypeBlacklist= array( # HTML may contain cookie-stealing JavaScript and web bugs 'text/html', 'text/javascript', 'text/x-javascript', 'application/x-shellscript', # PHP scripts may execute arbitrary code on the server 'application/x-php', 'text/x-php', # Other types that may be interpreted by some servers 'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh', # Client-side hazards on Internet Explorer 'text/scriptlet', 'application/x-msdownload', # Windows metafile, client-side vulnerability on some systems 'application/x-msmetafile', # A ZIP file may be a valid Java archive containing an applet which exploits the # same-origin policy to steal cookies 'application/zip', ); /** This is a flag to determine whether or not to check file extensions on upload. */ $wgCheckFileExtensions = true; /** * If this is turned off, users may override the warning for files not covered * by $wgFileExtensions. */ $wgStrictFileExtensions = true; /** Warn if uploaded files are larger than this (in bytes), or false to disable*/ $wgUploadSizeWarning = false; /** For compatibility with old installations set to false */ $wgPasswordSalt = true; /** Which namespaces should support subpages? * See Language.php for a list of namespaces. */ $wgNamespacesWithSubpages = array( NS_TALK => true, NS_USER => true, NS_USER_TALK => true, NS_PROJECT_TALK => true, NS_FILE_TALK => true, NS_MEDIAWIKI_TALK => true, NS_TEMPLATE_TALK => true, NS_HELP_TALK => true, NS_CATEGORY_TALK => true ); $wgNamespacesToBeSearchedDefault = array( NS_MAIN => true, ); /** * Additional namespaces to those in $wgNamespacesToBeSearchedDefault that * will be added to default search for "project" page inclusive searches * * Same format as $wgNamespacesToBeSearchedDefault */ $wgNamespacesToBeSearchedProject = array( NS_USER => true, NS_PROJECT => true, NS_HELP => true, NS_CATEGORY => true, ); $wgUseOldSearchUI = true; // temp testing variable /** * Site notice shown at the top of each page * * This message can contain wiki text, and can also be set through the * MediaWiki:Sitenotice page. You can also provide a separate message for * logged-out users using the MediaWiki:Anonnotice page. */ $wgSiteNotice = ''; # # Images settings # /** * Plugins for media file type handling. * Each entry in the array maps a MIME type to a class name */ $wgMediaHandlers = array( 'image/jpeg' => 'BitmapHandler', 'image/png' => 'BitmapHandler', 'image/gif' => 'BitmapHandler', 'image/tiff' => 'TiffHandler', 'image/x-ms-bmp' => 'BmpHandler', 'image/x-bmp' => 'BmpHandler', 'image/svg+xml' => 'SvgHandler', // official 'image/svg' => 'SvgHandler', // compat 'image/vnd.djvu' => 'DjVuHandler', // official 'image/x.djvu' => 'DjVuHandler', // compat 'image/x-djvu' => 'DjVuHandler', // compat ); /** * Resizing can be done using PHP's internal image libraries or using * ImageMagick or another third-party converter, e.g. GraphicMagick. * These support more file formats than PHP, which only supports PNG, * GIF, JPG, XBM and WBMP. * * Use Image Magick instead of PHP builtin functions. */ $wgUseImageMagick = false; /** The convert command shipped with ImageMagick */ $wgImageMagickConvertCommand = '/usr/bin/convert'; /** Sharpening parameter to ImageMagick */ $wgSharpenParameter = '0x0.4'; /** Reduction in linear dimensions below which sharpening will be enabled */ $wgSharpenReductionThreshold = 0.85; /** * Temporary directory used for ImageMagick. The directory must exist. Leave * this set to false to let ImageMagick decide for itself. */ $wgImageMagickTempDir = false; /** * Use another resizing converter, e.g. GraphicMagick * %s will be replaced with the source path, %d with the destination * %w and %h will be replaced with the width and height * * An example is provided for GraphicMagick * Leave as false to skip this */ #$wgCustomConvertCommand = "gm convert %s -resize %wx%h %d" $wgCustomConvertCommand = false; # Scalable Vector Graphics (SVG) may be uploaded as images. # Since SVG support is not yet standard in browsers, it is # necessary to rasterize SVGs to PNG as a fallback format. # # An external program is required to perform this conversion: $wgSVGConverters = array( 'ImageMagick' => '$path/convert -background white -thumbnail $widthx$height\! $input PNG:$output', 'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output', 'inkscape' => '$path/inkscape -z -w $width -f $input -e $output', 'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d $output $input', 'rsvg' => '$path/rsvg -w$width -h$height $input $output', 'imgserv' => '$path/imgserv-wrapper -i svg -o png -w$width $input $output', ); /** Pick one of the above */ $wgSVGConverter = 'ImageMagick'; /** If not in the executable PATH, specify */ $wgSVGConverterPath = ''; /** Don't scale a SVG larger than this */ $wgSVGMaxSize = 2048; /** * Don't thumbnail an image if it will use too much working memory * Default is 50 MB if decompressed to RGBA form, which corresponds to * 12.5 million pixels or 3500x3500 */ $wgMaxImageArea = 1.25e7; /** * Force thumbnailing of animated GIFs above this size to a single * frame instead of an animated thumbnail. ImageMagick seems to * get real unhappy and doesn't play well with resource limits. :P * Defaulting to 1 megapixel (1000x1000) */ $wgMaxAnimatedGifArea = 1.0e6; /** * Browsers don't support TIFF inline generally... * For inline display, we need to convert to PNG or JPEG. * Note scaling should work with ImageMagick, but may not with GD scaling. * // PNG is lossless, but inefficient for photos * $wgTiffThumbnailType = array( 'png', 'image/png' ); * // JPEG is good for photos, but has no transparency support. Bad for diagrams. * $wgTiffThumbnailType = array( 'jpg', 'image/jpeg' ); */ $wgTiffThumbnailType = false; /** * If rendered thumbnail files are older than this timestamp, they * will be rerendered on demand as if the file didn't already exist. * Update if there is some need to force thumbs and SVG rasterizations * to rerender, such as fixes to rendering bugs. */ $wgThumbnailEpoch = '20030516000000'; /** * If set, inline scaled images will still produce tags ready for * output instead of showing an error message. * * This may be useful if errors are transitory, especially if the site * is configured to automatically render thumbnails on request. * * On the other hand, it may obscure error conditions from debugging. * Enable the debug log or the 'thumbnail' log group to make sure errors * are logged to a file for review. */ $wgIgnoreImageErrors = false; /** * Allow thumbnail rendering on page view. If this is false, a valid * thumbnail URL is still output, but no file will be created at * the target location. This may save some time if you have a * thumb.php or 404 handler set up which is faster than the regular * webserver(s). */ $wgGenerateThumbnailOnParse = true; /** Whether or not to use image resizing */ $wgUseImageResize = true; /** Set $wgCommandLineMode if it's not set already, to avoid notices */ if( !isset( $wgCommandLineMode ) ) { $wgCommandLineMode = false; } /** For colorized maintenance script output, is your terminal background dark ? */ $wgCommandLineDarkBg = false; # # Recent changes settings # /** Log IP addresses in the recentchanges table; can be accessed only by extensions (e.g. CheckUser) or a DB admin */ $wgPutIPinRC = true; /** * Recentchanges items are periodically purged; entries older than this many * seconds will go. * For one week : 7 * 24 * 3600 */ $wgRCMaxAge = 7 * 24 * 3600; /** * Filter $wgRCLinkDays by $wgRCMaxAge to avoid showing links for numbers higher than what will be stored. * Note that this is disabled by default because we sometimes do have RC data which is beyond the limit * for some reason, and some users may use the high numbers to display that data which is still there. */ $wgRCFilterByAge = false; /** * List of Days and Limits options to list in the Special:Recentchanges and Special:Recentchangeslinked pages. */ $wgRCLinkLimits = array( 50, 100, 250, 500 ); $wgRCLinkDays = array( 1, 3, 7, 14, 30 ); /** * Send recent changes updates via UDP. The updates will be formatted for IRC. * Set this to the IP address of the receiver. */ $wgRC2UDPAddress = false; /** * Port number for RC updates */ $wgRC2UDPPort = false; /** * Prefix to prepend to each UDP packet. * This can be used to identify the wiki. A script is available called * mxircecho.py which listens on a UDP port, and uses a prefix ending in a * tab to identify the IRC channel to send the log line to. */ $wgRC2UDPPrefix = ''; /** * If this is set to true, $wgLocalInterwiki will be prepended to links in the * IRC feed. If this is set to a string, that string will be used as the prefix. */ $wgRC2UDPInterwikiPrefix = false; /** * Set to true to omit "bot" edits (by users with the bot permission) from the * UDP feed. */ $wgRC2UDPOmitBots = false; /** * Enable user search in Special:Newpages * This is really a temporary hack around an index install bug on some Wikipedias. * Kill it once fixed. */ $wgEnableNewpagesUserFilter = true; /** * Whether to use metadata edition * This will put categories, language links and allowed templates in a separate text box * while editing pages * EXPERIMENTAL */ $wgUseMetadataEdit = false; /** Full name (including namespace) of the page containing templates names that will be allowed as metadata */ $wgMetadataWhitelist = ''; # # Copyright and credits settings # /** RDF metadata toggles */ $wgEnableDublinCoreRdf = false; $wgEnableCreativeCommonsRdf = false; /** Override for copyright metadata. * TODO: these options need documentation */ $wgRightsPage = NULL; $wgRightsUrl = NULL; $wgRightsText = NULL; $wgRightsIcon = NULL; /** Set this to some HTML to override the rights icon with an arbitrary logo */ $wgCopyrightIcon = NULL; /** Set this to true if you want detailed copyright information forms on Upload. */ $wgUseCopyrightUpload = false; /** Set this to false if you want to disable checking that detailed copyright * information values are not empty. */ $wgCheckCopyrightUpload = true; /** * Set this to the number of authors that you want to be credited below an * article text. Set it to zero to hide the attribution block, and a negative * number (like -1) to show all authors. Note that this will require 2-3 extra * database hits, which can have a not insignificant impact on performance for * large wikis. */ $wgMaxCredits = 0; /** If there are more than $wgMaxCredits authors, show $wgMaxCredits of them. * Otherwise, link to a separate credits page. */ $wgShowCreditsIfMax = true; /** * Set this to false to avoid forcing the first letter of links to capitals. * WARNING: may break links! This makes links COMPLETELY case-sensitive. Links * appearing with a capital at the beginning of a sentence will *not* go to the * same place as links in the middle of a sentence using a lowercase initial. */ $wgCapitalLinks = true; /** * List of interwiki prefixes for wikis we'll accept as sources for * Special:Import (for sysops). Since complete page history can be imported, * these should be 'trusted'. * * If a user has the 'import' permission but not the 'importupload' permission, * they will only be able to run imports through this transwiki interface. */ $wgImportSources = array(); /** * Optional default target namespace for interwiki imports. * Can use this to create an incoming "transwiki"-style queue. * Set to numeric key, not the name. * * Users may override this in the Special:Import dialog. */ $wgImportTargetNamespace = null; /** * If set to false, disables the full-history option on Special:Export. * This is currently poorly optimized for long edit histories, so is * disabled on Wikimedia's sites. */ $wgExportAllowHistory = true; /** * If set nonzero, Special:Export requests for history of pages with * more revisions than this will be rejected. On some big sites things * could get bogged down by very very long pages. */ $wgExportMaxHistory = 0; $wgExportAllowListContributors = false ; /** * If non-zero, Special:Export accepts a "pagelink-depth" parameter * up to this specified level, which will cause it to include all * pages linked to from the pages you specify. Since this number * can become *insanely large* and could easily break your wiki, * it's disabled by default for now. * * There's a HARD CODED limit of 5 levels of recursion to prevent a * crazy-big export from being done by someone setting the depth * number too high. In other words, last resort safety net. */ $wgExportMaxLinkDepth = 0; /** * Whether to allow the "export all pages in namespace" option */ $wgExportFromNamespaces = false; /** * Edits matching these regular expressions in body text * will be recognised as spam and rejected automatically. * * There's no administrator override on-wiki, so be careful what you set. :) * May be an array of regexes or a single string for backwards compatibility. * * See http://en.wikipedia.org/wiki/Regular_expression */ $wgSpamRegex = array(); /** Same as the above except for edit summaries */ $wgSummarySpamRegex = array(); /** Similarly you can get a function to do the job. The function will be given * the following args: * - a Title object for the article the edit is made on * - the text submitted in the textarea (wpTextbox1) * - the section number. * The return should be boolean indicating whether the edit matched some evilness: * - true : block it * - false : let it through * * For a complete example, have a look at the SpamBlacklist extension. */ $wgFilterCallback = false; /** Go button goes straight to the edit screen if the article doesn't exist. */ $wgGoToEdit = false; /** Allow raw, unchecked HTML in ... sections. * THIS IS VERY DANGEROUS on a publically editable site, so USE wgGroupPermissions * TO RESTRICT EDITING to only those that you trust */ $wgRawHtml = false; /** * $wgUseTidy: use tidy to make sure HTML output is sane. * Tidy is a free tool that fixes broken HTML. * See http://www.w3.org/People/Raggett/tidy/ * $wgTidyBin should be set to the path of the binary and * $wgTidyConf to the path of the configuration file. * $wgTidyOpts can include any number of parameters. * * $wgTidyInternal controls the use of the PECL extension to use an in- * process tidy library instead of spawning a separate program. * Normally you shouldn't need to override the setting except for * debugging. To install, use 'pear install tidy' and add a line * 'extension=tidy.so' to php.ini. */ $wgUseTidy = false; $wgAlwaysUseTidy = false; $wgTidyBin = 'tidy'; $wgTidyConf = $IP.'/includes/tidy.conf'; $wgTidyOpts = ''; $wgTidyInternal = extension_loaded( 'tidy' ); /** * Put tidy warnings in HTML comments * Only works for internal tidy. */ $wgDebugTidy = false; /** * Validate the overall output using tidy and refuse * to display the page if it's not valid. */ $wgValidateAllHtml = false; /** See list of skins and their symbolic names in languages/Language.php */ $wgDefaultSkin = 'monobook'; /** Should we allow the user's to select their own skin that will override the default? */ $wgAllowUserSkin = true; /** * Optionally, we can specify a stylesheet to use for media="handheld". * This is recognized by some, but not all, handheld/mobile/PDA browsers. * If left empty, compliant handheld browsers won't pick up the skin * stylesheet, which is specified for 'screen' media. * * Can be a complete URL, base-relative path, or $wgStylePath-relative path. * Try 'chick/main.css' to apply the Chick styles to the MonoBook HTML. * * Will also be switched in when 'handheld=yes' is added to the URL, like * the 'printable=yes' mode for print media. */ $wgHandheldStyle = false; /** * If set, 'screen' and 'handheld' media specifiers for stylesheets are * transformed such that they apply to the iPhone/iPod Touch Mobile Safari, * which doesn't recognize 'handheld' but does support media queries on its * screen size. * * Consider only using this if you have a *really good* handheld stylesheet, * as iPhone users won't have any way to disable it and use the "grown-up" * styles instead. */ $wgHandheldForIPhone = false; /** * Settings added to this array will override the default globals for the user * preferences used by anonymous visitors and newly created accounts. * For instance, to disable section editing links: * $wgDefaultUserOptions ['editsection'] = 0; * */ $wgDefaultUserOptions = array( 'quickbar' => 1, 'underline' => 2, 'cols' => 80, 'rows' => 25, 'searchlimit' => 20, 'contextlines' => 5, 'contextchars' => 50, 'disablesuggest' => 0, 'skin' => false, 'math' => 1, 'usenewrc' => 0, 'rcdays' => 7, 'rclimit' => 50, 'wllimit' => 250, 'hideminor' => 0, 'hidepatrolled' => 0, 'newpageshidepatrolled' => 0, 'highlightbroken' => 1, 'stubthreshold' => 0, 'previewontop' => 1, 'previewonfirst' => 0, 'editsection' => 1, 'editsectiononrightclick' => 0, 'editondblclick' => 0, 'editwidth' => 0, 'showtoc' => 1, 'showtoolbar' => 1, 'minordefault' => 0, 'date' => 'default', 'imagesize' => 2, 'thumbsize' => 2, 'rememberpassword' => 0, 'nocache' => 0, 'diffonly' => 0, 'showhiddencats' => 0, 'norollbackdiff' => 0, 'enotifwatchlistpages' => 0, 'enotifusertalkpages' => 1, 'enotifminoredits' => 0, 'enotifrevealaddr' => 0, 'shownumberswatching' => 1, 'fancysig' => 0, 'externaleditor' => 0, 'externaldiff' => 0, 'forceeditsummary' => 0, 'showjumplinks' => 1, 'justify' => 0, 'numberheadings' => 0, 'uselivepreview' => 0, 'watchlistdays' => 3.0, 'extendwatchlist' => 0, 'watchlisthideminor' => 0, 'watchlisthidebots' => 0, 'watchlisthideown' => 0, 'watchlisthideanons' => 0, 'watchlisthideliu' => 0, 'watchlisthidepatrolled' => 0, 'watchcreations' => 0, 'watchdefault' => 0, 'watchmoves' => 0, 'watchdeletion' => 0, 'noconvertlink' => 0, 'gender' => 'unknown', ); /** Whether or not to allow and use real name fields. Defaults to true. */ $wgAllowRealName = true; /***************************************************************************** * Extensions */ /** * A list of callback functions which are called once MediaWiki is fully initialised */ $wgExtensionFunctions = array(); /** * Extension functions for initialisation of skins. This is called somewhat earlier * than $wgExtensionFunctions. */ $wgSkinExtensionFunctions = array(); /** * Extension messages files * Associative array mapping extension name to the filename where messages can be found. * The file must create a variable called $messages. * When the messages are needed, the extension should call wfLoadExtensionMessages(). * * Example: * $wgExtensionMessagesFiles['ConfirmEdit'] = dirname(__FILE__).'/ConfirmEdit.i18n.php'; * */ $wgExtensionMessagesFiles = array(); /** * Aliases for special pages provided by extensions. * Associative array mapping special page to array of aliases. First alternative * for each special page will be used as the normalised name for it. English * aliases will be added to the end of the list so that they always work. The * file must define a variable $aliases. * * Example: * $wgExtensionAliasesFiles['Translate'] = dirname(__FILE__).'/Translate.alias.php'; */ $wgExtensionAliasesFiles = array(); /** * Parser output hooks. * This is an associative array where the key is an extension-defined tag * (typically the extension name), and the value is a PHP callback. * These will be called as an OutputPageParserOutput hook, if the relevant * tag has been registered with the parser output object. * * Registration is done with $pout->addOutputHook( $tag, $data ). * * The callback has the form: * function outputHook( $outputPage, $parserOutput, $data ) { ... } */ $wgParserOutputHooks = array(); /** * List of valid skin names. * The key should be the name in all lower case, the value should be a display name. * The default skins will be added later, by Skin::getSkinNames(). Use * Skin::getSkinNames() as an accessor if you wish to have access to the full list. */ $wgValidSkinNames = array(); /** * Special page list. * See the top of SpecialPage.php for documentation. */ $wgSpecialPages = array(); /** * Array mapping class names to filenames, for autoloading. */ $wgAutoloadClasses = array(); /** * An array of extension types and inside that their names, versions, authors, * urls, descriptions and pointers to localized description msgs. Note that * the version, url, description and descriptionmsg key can be omitted. * * * $wgExtensionCredits[$type][] = array( * 'name' => 'Example extension', * 'version' => 1.9, * 'svn-revision' => '$LastChangedRevision: 53179 $', * 'author' => 'Foo Barstein', * 'url' => 'http://wwww.example.com/Example%20Extension/', * 'description' => 'An example extension', * 'descriptionmsg' => 'exampleextension-desc', * ); * * * Where $type is 'specialpage', 'parserhook', 'variable', 'media' or 'other'. */ $wgExtensionCredits = array(); /* * end extensions ******************************************************************************/ /** * Allow user Javascript page? * This enables a lot of neat customizations, but may * increase security risk to users and server load. */ $wgAllowUserJs = false; /** * Allow user Cascading Style Sheets (CSS)? * This enables a lot of neat customizations, but may * increase security risk to users and server load. */ $wgAllowUserCss = false; /** Use the site's Javascript page? */ $wgUseSiteJs = true; /** Use the site's Cascading Style Sheets (CSS)? */ $wgUseSiteCss = true; /** Filter for Special:Randompage. Part of a WHERE clause */ $wgExtraRandompageSQL = false; /** Allow the "info" action, very inefficient at the moment */ $wgAllowPageInfo = false; /** Maximum indent level of toc. */ $wgMaxTocLevel = 999; /** Name of the external diff engine to use */ $wgExternalDiffEngine = false; /** Whether to use inline diff */ $wgEnableHtmlDiff = false; /** Use RC Patrolling to check for vandalism */ $wgUseRCPatrol = true; /** Use new page patrolling to check new pages on Special:Newpages */ $wgUseNPPatrol = true; /** Provide syndication feeds (RSS, Atom) for, e.g., Recentchanges, Newpages */ $wgFeed = true; /** Set maximum number of results to return in syndication feeds (RSS, Atom) for * eg Recentchanges, Newpages. */ $wgFeedLimit = 50; /** _Minimum_ timeout for cached Recentchanges feed, in seconds. * A cached version will continue to be served out even if changes * are made, until this many seconds runs out since the last render. * * If set to 0, feed caching is disabled. Use this for debugging only; * feed generation can be pretty slow with diffs. */ $wgFeedCacheTimeout = 60; /** When generating Recentchanges RSS/Atom feed, diffs will not be generated for * pages larger than this size. */ $wgFeedDiffCutoff = 32768; /** Override the site's default RSS/ATOM feed for recentchanges that appears on * every page. Some sites might have a different feed they'd like to promote * instead of the RC feed (maybe like a "Recent New Articles" or "Breaking news" one). * Ex: $wgSiteFeed['format'] = "http://example.com/somefeed.xml"; Format can be one * of either 'rss' or 'atom'. */ $wgOverrideSiteFeed = array(); /** * Additional namespaces. If the namespaces defined in Language.php and * Namespace.php are insufficient, you can create new ones here, for example, * to import Help files in other languages. * PLEASE NOTE: Once you delete a namespace, the pages in that namespace will * no longer be accessible. If you rename it, then you can access them through * the new namespace name. * * Custom namespaces should start at 100 to avoid conflicting with standard * namespaces, and should always follow the even/odd main/talk pattern. */ #$wgExtraNamespaces = # array(100 => "Hilfe", # 101 => "Hilfe_Diskussion", # 102 => "Aide", # 103 => "Discussion_Aide" # ); $wgExtraNamespaces = NULL; /** * Namespace aliases * These are alternate names for the primary localised namespace names, which * are defined by $wgExtraNamespaces and the language file. If a page is * requested with such a prefix, the request will be redirected to the primary * name. * * Set this to a map from namespace names to IDs. * Example: * $wgNamespaceAliases = array( * 'Wikipedian' => NS_USER, * 'Help' => 100, * ); */ $wgNamespaceAliases = array(); /** * Limit images on image description pages to a user-selectable limit. In order * to reduce disk usage, limits can only be selected from a list. * The user preference is saved as an array offset in the database, by default * the offset is set with $wgDefaultUserOptions['imagesize']. Make sure you * change it if you alter the array (see bug 8858). * This is the list of settings the user can choose from: */ $wgImageLimits = array ( array(320,240), array(640,480), array(800,600), array(1024,768), array(1280,1024), array(10000,10000) ); /** * Adjust thumbnails on image pages according to a user setting. In order to * reduce disk usage, the values can only be selected from a list. This is the * list of settings the user can choose from: */ $wgThumbLimits = array( 120, 150, 180, 200, 250, 300 ); /** * Adjust width of upright images when parameter 'upright' is used * This allows a nicer look for upright images without the need to fix the width * by hardcoded px in wiki sourcecode. */ $wgThumbUpright = 0.75; /** * On category pages, show thumbnail gallery for images belonging to that * category instead of listing them as articles. */ $wgCategoryMagicGallery = true; /** * Paging limit for categories */ $wgCategoryPagingLimit = 200; /** * Should the default category sortkey be the prefixed title? * Run maintenance/refreshLinks.php after changing this. */ $wgCategoryPrefixedDefaultSortkey = true; /** * Browser Blacklist for unicode non compliant browsers * Contains a list of regexps : "/regexp/" matching problematic browsers */ $wgBrowserBlackList = array( /** * Netscape 2-4 detection * The minor version may contain strings such as "Gold" or "SGoldC-SGI" * Lots of non-netscape user agents have "compatible", so it's useful to check for that * with a negative assertion. The [UIN] identifier specifies the level of security * in a Netscape/Mozilla browser, checking for it rules out a number of fakers. * The language string is unreliable, it is missing on NS4 Mac. * * Reference: http://www.psychedelix.com/agents/index.shtml */ '/^Mozilla\/2\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/', '/^Mozilla\/3\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/', '/^Mozilla\/4\.[^ ]+ [^(]*?\((?!compatible).*; [UIN]/', /** * MSIE on Mac OS 9 is teh sux0r, converts þ to , ð to , Þ to and Ð to * * Known useragents: * - Mozilla/4.0 (compatible; MSIE 5.0; Mac_PowerPC) * - Mozilla/4.0 (compatible; MSIE 5.15; Mac_PowerPC) * - Mozilla/4.0 (compatible; MSIE 5.23; Mac_PowerPC) * - [...] * * @link http://en.wikipedia.org/w/index.php?title=User%3A%C6var_Arnfj%F6r%F0_Bjarmason%2Ftestme&diff=12356041&oldid=12355864 * @link http://en.wikipedia.org/wiki/Template%3AOS9 */ '/^Mozilla\/4\.0 \(compatible; MSIE \d+\.\d+; Mac_PowerPC\)/', /** * Google wireless transcoder, seems to eat a lot of chars alive * http://it.wikipedia.org/w/index.php?title=Luciano_Ligabue&diff=prev&oldid=8857361 */ '/^Mozilla\/4\.0 \(compatible; MSIE 6.0; Windows NT 5.0; Google Wireless Transcoder;\)/' ); /** * Fake out the timezone that the server thinks it's in. This will be used for * date display and not for what's stored in the DB. Leave to null to retain * your server's OS-based timezone value. This is the same as the timezone. * * This variable is currently used ONLY for signature formatting, not for * anything else. * * Timezones can be translated by editing MediaWiki messages of type * timezone-nameinlowercase like timezone-utc. */ # $wgLocaltimezone = 'GMT'; # $wgLocaltimezone = 'PST8PDT'; # $wgLocaltimezone = 'Europe/Sweden'; # $wgLocaltimezone = 'CET'; $wgLocaltimezone = null; /** * Set an offset from UTC in minutes to use for the default timezone setting * for anonymous users and new user accounts. * * This setting is used for most date/time displays in the software, and is * overrideable in user preferences. It is *not* used for signature timestamps. * * You can set it to match the configured server timezone like this: * $wgLocalTZoffset = date("Z") / 60; * * If your server is not configured for the timezone you want, you can set * this in conjunction with the signature timezone and override the TZ * environment variable like so: * $wgLocaltimezone="Europe/Berlin"; * putenv("TZ=$wgLocaltimezone"); * $wgLocalTZoffset = date("Z") / 60; * * Leave at NULL to show times in universal time (UTC/GMT). */ $wgLocalTZoffset = null; /** * When translating messages with wfMsg(), it is not always clear what should * be considered UI messages and what should be content messages. * * For example, for the English Wikipedia, there should be only one 'mainpage', * so when getting the link for 'mainpage', we should treat it as site content * and call wfMsgForContent(), but for rendering the text of the link, we call * wfMsg(). The code behaves this way by default. However, sites like the * Wikimedia Commons do offer different versions of 'mainpage' and the like for * different languages. This array provides a way to override the default * behavior. For example, to allow language-specific main page and community * portal, set * * $wgForceUIMsgAsContentMsg = array( 'mainpage', 'portal-url' ); */ $wgForceUIMsgAsContentMsg = array(); /** * Authentication plugin. */ $wgAuth = null; /** * Global list of hooks. * Add a hook by doing: * $wgHooks['event_name'][] = $function; * or: * $wgHooks['event_name'][] = array($function, $data); * or: * $wgHooks['event_name'][] = array($object, 'method'); */ $wgHooks = array(); /** * The logging system has two levels: an event type, which describes the * general category and can be viewed as a named subset of all logs; and * an action, which is a specific kind of event that can exist in that * log type. */ $wgLogTypes = array( '', 'block', 'protect', 'rights', 'delete', 'upload', 'move', 'import', 'patrol', 'merge', 'suppress', ); /** * This restricts log access to those who have a certain right * Users without this will not see it in the option menu and can not view it * Restricted logs are not added to recent changes * Logs should remain non-transcludable */ $wgLogRestrictions = array( 'suppress' => 'suppressionlog' ); /** * Show/hide links on Special:Log will be shown for these log types. * * This is associative array of log type => boolean "hide by default" * * See $wgLogTypes for a list of available log types. * * For example: * $wgFilterLogTypes => array( * 'move' => true, * 'import' => false, * ); * * Will display show/hide links for the move and import logs. Move logs will be * hidden by default unless the link is clicked. Import logs will be shown by * default, and hidden when the link is clicked. * * A message of the form log-show-hide- should be added, and will be used * for the link text. */ $wgFilterLogTypes = array( 'patrol' => true ); /** * Lists the message key string for each log type. The localized messages * will be listed in the user interface. * * Extensions with custom log types may add to this array. */ $wgLogNames = array( '' => 'all-logs-page', 'block' => 'blocklogpage', 'protect' => 'protectlogpage', 'rights' => 'rightslog', 'delete' => 'dellogpage', 'upload' => 'uploadlogpage', 'move' => 'movelogpage', 'import' => 'importlogpage', 'patrol' => 'patrol-log-page', 'merge' => 'mergelog', 'suppress' => 'suppressionlog', ); /** * Lists the message key string for descriptive text to be shown at the * top of each log type. * * Extensions with custom log types may add to this array. */ $wgLogHeaders = array( '' => 'alllogstext', 'block' => 'blocklogtext', 'protect' => 'protectlogtext', 'rights' => 'rightslogtext', 'delete' => 'dellogpagetext', 'upload' => 'uploadlogpagetext', 'move' => 'movelogpagetext', 'import' => 'importlogpagetext', 'patrol' => 'patrol-log-header', 'merge' => 'mergelogpagetext', 'suppress' => 'suppressionlogtext', ); /** * Lists the message key string for formatting individual events of each * type and action when listed in the logs. * * Extensions with custom log types may add to this array. */ $wgLogActions = array( 'block/block' => 'blocklogentry', 'block/unblock' => 'unblocklogentry', 'block/reblock' => 'reblock-logentry', 'protect/protect' => 'protectedarticle', 'protect/modify' => 'modifiedarticleprotection', 'protect/unprotect' => 'unprotectedarticle', 'protect/move_prot' => 'movedarticleprotection', 'rights/rights' => 'rightslogentry', 'delete/delete' => 'deletedarticle', 'delete/restore' => 'undeletedarticle', 'delete/revision' => 'revdelete-logentry', 'delete/event' => 'logdelete-logentry', 'upload/upload' => 'uploadedimage', 'upload/overwrite' => 'overwroteimage', 'upload/revert' => 'uploadedimage', 'move/move' => '1movedto2', 'move/move_redir' => '1movedto2_redir', 'import/upload' => 'import-logentry-upload', 'import/interwiki' => 'import-logentry-interwiki', 'merge/merge' => 'pagemerge-logentry', 'suppress/revision' => 'revdelete-logentry', 'suppress/file' => 'revdelete-logentry', 'suppress/event' => 'logdelete-logentry', 'suppress/delete' => 'suppressedarticle', 'suppress/block' => 'blocklogentry', 'suppress/reblock' => 'reblock-logentry', ); /** * The same as above, but here values are names of functions, * not messages */ $wgLogActionsHandlers = array(); /** * Maintain a log of newusers at Log/newusers? */ $wgNewUserLog = true; /** * List of special pages, followed by what subtitle they should go under * at Special:SpecialPages */ $wgSpecialPageGroups = array( 'DoubleRedirects' => 'maintenance', 'BrokenRedirects' => 'maintenance', 'Lonelypages' => 'maintenance', 'Uncategorizedpages' => 'maintenance', 'Uncategorizedcategories' => 'maintenance', 'Uncategorizedimages' => 'maintenance', 'Uncategorizedtemplates' => 'maintenance', 'Unusedcategories' => 'maintenance', 'Unusedimages' => 'maintenance', 'Protectedpages' => 'maintenance', 'Protectedtitles' => 'maintenance', 'Unusedtemplates' => 'maintenance', 'Withoutinterwiki' => 'maintenance', 'Longpages' => 'maintenance', 'Shortpages' => 'maintenance', 'Ancientpages' => 'maintenance', 'Deadendpages' => 'maintenance', 'Wantedpages' => 'maintenance', 'Wantedcategories' => 'maintenance', 'Wantedfiles' => 'maintenance', 'Wantedtemplates' => 'maintenance', 'Unwatchedpages' => 'maintenance', 'Fewestrevisions' => 'maintenance', 'Userlogin' => 'login', 'Userlogout' => 'login', 'CreateAccount' => 'login', 'Recentchanges' => 'changes', 'Recentchangeslinked' => 'changes', 'Watchlist' => 'changes', 'Newimages' => 'changes', 'Newpages' => 'changes', 'Log' => 'changes', 'Tags' => 'changes', 'Upload' => 'media', 'Listfiles' => 'media', 'MIMEsearch' => 'media', 'FileDuplicateSearch' => 'media', 'Filepath' => 'media', 'Listusers' => 'users', 'Listgrouprights' => 'users', 'Ipblocklist' => 'users', 'Contributions' => 'users', 'Emailuser' => 'users', 'Listadmins' => 'users', 'Listbots' => 'users', 'Userrights' => 'users', 'Blockip' => 'users', 'Preferences' => 'users', 'Resetpass' => 'users', 'DeletedContributions' => 'users', 'Mostlinked' => 'highuse', 'Mostlinkedcategories' => 'highuse', 'Mostlinkedtemplates' => 'highuse', 'Mostcategories' => 'highuse', 'Mostimages' => 'highuse', 'Mostrevisions' => 'highuse', 'Allpages' => 'pages', 'Prefixindex' => 'pages', 'Listredirects' => 'pages', 'Categories' => 'pages', 'Disambiguations' => 'pages', 'Randompage' => 'redirects', 'Randomredirect' => 'redirects', 'Mypage' => 'redirects', 'Mytalk' => 'redirects', 'Mycontributions' => 'redirects', 'Search' => 'redirects', 'LinkSearch' => 'redirects', 'Movepage' => 'pagetools', 'MergeHistory' => 'pagetools', 'Revisiondelete' => 'pagetools', 'Undelete' => 'pagetools', 'Export' => 'pagetools', 'Import' => 'pagetools', 'Whatlinkshere' => 'pagetools', 'Statistics' => 'wiki', 'Version' => 'wiki', 'Lockdb' => 'wiki', 'Unlockdb' => 'wiki', 'Allmessages' => 'wiki', 'Popularpages' => 'wiki', 'Specialpages' => 'other', 'Blockme' => 'other', 'Booksources' => 'other', ); /** * Experimental preview feature to fetch rendered text * over an XMLHttpRequest from JavaScript instead of * forcing a submit and reload of the whole page. * Leave disabled unless you're testing it. */ $wgLivePreview = false; /** * Disable the internal MySQL-based search, to allow it to be * implemented by an extension instead. */ $wgDisableInternalSearch = false; /** * Set this to a URL to forward search requests to some external location. * If the URL includes '$1', this will be replaced with the URL-encoded * search term. * * For example, to forward to Google you'd have something like: * $wgSearchForwardUrl = 'http://www.google.com/search?q=$1' . * '&domains=http://example.com' . * '&sitesearch=http://example.com' . * '&ie=utf-8&oe=utf-8'; */ $wgSearchForwardUrl = null; /** * Set a default target for external links, e.g. _blank to pop up a new window */ $wgExternalLinkTarget = false; /** * If true, external URL links in wiki text will be given the * rel="nofollow" attribute as a hint to search engines that * they should not be followed for ranking purposes as they * are user-supplied and thus subject to spamming. */ $wgNoFollowLinks = true; /** * Namespaces in which $wgNoFollowLinks doesn't apply. * See Language.php for a list of namespaces. */ $wgNoFollowNsExceptions = array(); /** * If this is set to an array of domains, external links to these domain names * (or any subdomains) will not be set to rel="nofollow" regardless of the * value of $wgNoFollowLinks. For instance: * * $wgNoFollowDomainExceptions = array( 'en.wikipedia.org', 'wiktionary.org' ); * * This would add rel="nofollow" to links to de.wikipedia.org, but not * en.wikipedia.org, wiktionary.org, en.wiktionary.org, us.en.wikipedia.org, * etc. */ $wgNoFollowDomainExceptions = array(); /** * Default robot policy. The default policy is to encourage indexing and fol- * lowing of links. It may be overridden on a per-namespace and/or per-page * basis. */ $wgDefaultRobotPolicy = 'index,follow'; /** * Robot policies per namespaces. The default policy is given above, the array * is made of namespace constants as defined in includes/Defines.php. You can- * not specify a different default policy for NS_SPECIAL: it is always noindex, * nofollow. This is because a number of special pages (e.g., ListPages) have * many permutations of options that display the same data under redundant * URLs, so search engine spiders risk getting lost in a maze of twisty special * pages, all alike, and never reaching your actual content. * * Example: * $wgNamespaceRobotPolicies = array( NS_TALK => 'noindex' ); */ $wgNamespaceRobotPolicies = array(); /** * Robot policies per article. These override the per-namespace robot policies. * Must be in the form of an array where the key part is a properly canonical- * ised text form title and the value is a robot policy. * Example: * $wgArticleRobotPolicies = array( 'Main Page' => 'noindex,follow', * 'User:Bob' => 'index,follow' ); * Example that DOES NOT WORK because the names are not canonical text forms: * $wgArticleRobotPolicies = array( * # Underscore, not space! * 'Main_Page' => 'noindex,follow', * # "Project", not the actual project name! * 'Project:X' => 'index,follow', * # Needs to be "Abc", not "abc" (unless $wgCapitalLinks is false)! * 'abc' => 'noindex,nofollow' * ); */ $wgArticleRobotPolicies = array(); /** * An array of namespace keys in which the __INDEX__/__NOINDEX__ magic words * will not function, so users can't decide whether pages in that namespace are * indexed by search engines. If set to null, default to $wgContentNamespaces. * Example: * $wgExemptFromUserRobotsControl = array( NS_MAIN, NS_TALK, NS_PROJECT ); */ $wgExemptFromUserRobotsControl = null; /** * Specifies the minimal length of a user password. If set to 0, empty pass- * words are allowed. */ $wgMinimalPasswordLength = 0; /** * Activate external editor interface for files and pages * See http://meta.wikimedia.org/wiki/Help:External_editors */ $wgUseExternalEditor = true; /** Whether or not to sort special pages in Special:Specialpages */ $wgSortSpecialPages = true; /** * Specify the name of a skin that should not be presented in the list of a- * vailable skins. Use for blacklisting a skin which you do not want to remove * from the .../skins/ directory */ $wgSkipSkin = ''; $wgSkipSkins = array(); # More of the same /** * Array of disabled article actions, e.g. view, edit, dublincore, delete, etc. */ $wgDisabledActions = array(); /** * Disable redirects to special pages and interwiki redirects, which use a 302 * and have no "redirected from" link. */ $wgDisableHardRedirects = false; /** * Use http.dnsbl.sorbs.net to check for open proxies */ $wgEnableSorbs = false; $wgSorbsUrl = 'http.dnsbl.sorbs.net.'; /** * Proxy whitelist, list of addresses that are assumed to be non-proxy despite * what the other methods might say. */ $wgProxyWhitelist = array(); /** * Simple rate limiter options to brake edit floods. Maximum number actions * allowed in the given number of seconds; after that the violating client re- * ceives HTTP 500 error pages until the period elapses. * * array( 4, 60 ) for a maximum of 4 hits in 60 seconds. * * This option set is experimental and likely to change. Requires memcached. */ $wgRateLimits = array( 'edit' => array( 'anon' => null, // for any and all anonymous edits (aggregate) 'user' => null, // for each logged-in user 'newbie' => null, // for each recent (autoconfirmed) account; overrides 'user' 'ip' => null, // for each anon and recent account 'subnet' => null, // ... with final octet removed ), 'move' => array( 'user' => null, 'newbie' => null, 'ip' => null, 'subnet' => null, ), 'mailpassword' => array( 'anon' => NULL, ), 'emailuser' => array( 'user' => null, ), ); /** * Set to a filename to log rate limiter hits. */ $wgRateLimitLog = null; /** * Array of groups which should never trigger the rate limiter * * @deprecated as of 1.13.0, the preferred method is using * $wgGroupPermissions[]['noratelimit']. However, this will still * work if desired. * * $wgRateLimitsExcludedGroups = array( 'sysop', 'bureaucrat' ); */ $wgRateLimitsExcludedGroups = array(); /** * Array of IPs which should be excluded from rate limits. * This may be useful for whitelisting NAT gateways for conferences, etc. */ $wgRateLimitsExcludedIPs = array(); /** * On Special:Unusedimages, consider images "used", if they are put * into a category. Default (false) is not to count those as used. */ $wgCountCategorizedImagesAsUsed = false; /** * External stores allow including content * from non database sources following URL links * * Short names of ExternalStore classes may be specified in an array here: * $wgExternalStores = array("http","file","custom")... * * CAUTION: Access to database might lead to code execution */ $wgExternalStores = false; /** * An array of external mysql servers, e.g. * $wgExternalServers = array( 'cluster1' => array( 'srv28', 'srv29', 'srv30' ) ); * Used by LBFactory_Simple, may be ignored if $wgLBFactoryConf is set to another class. */ $wgExternalServers = array(); /** * The place to put new revisions, false to put them in the local text table. * Part of a URL, e.g. DB://cluster1 * * Can be an array instead of a single string, to enable data distribution. Keys * must be consecutive integers, starting at zero. Example: * * $wgDefaultExternalStore = array( 'DB://cluster1', 'DB://cluster2' ); * */ $wgDefaultExternalStore = false; /** * Revision text may be cached in $wgMemc to reduce load on external storage * servers and object extraction overhead for frequently-loaded revisions. * * Set to 0 to disable, or number of seconds before cache expiry. */ $wgRevisionCacheExpiry = 0; /** * list of trusted media-types and mime types. * Use the MEDIATYPE_xxx constants to represent media types. * This list is used by Image::isSafeFile * * Types not listed here will have a warning about unsafe content * displayed on the images description page. It would also be possible * to use this for further restrictions, like disabling direct * [[media:...]] links for non-trusted formats. */ $wgTrustedMediaFormats= array( MEDIATYPE_BITMAP, //all bitmap formats MEDIATYPE_AUDIO, //all audio formats MEDIATYPE_VIDEO, //all plain video formats "image/svg+xml", //svg (only needed if inline rendering of svg is not supported) "application/pdf", //PDF files #"application/x-shockwave-flash", //flash/shockwave movie ); /** * Allow special page inclusions such as {{Special:Allpages}} */ $wgAllowSpecialInclusion = true; /** * Timeout for HTTP requests done via CURL */ $wgHTTPTimeout = 3; /** * Proxy to use for CURL requests. */ $wgHTTPProxy = false; /** * Enable interwiki transcluding. Only when iw_trans=1. */ $wgEnableScaryTranscluding = false; /** * Expiry time for interwiki transclusion */ $wgTranscludeCacheExpiry = 3600; /** * Support blog-style "trackbacks" for articles. See * http://www.sixapart.com/pronet/docs/trackback_spec for details. */ $wgUseTrackbacks = false; /** * Enable filtering of categories in Recentchanges */ $wgAllowCategorizedRecentChanges = false ; /** * Number of jobs to perform per request. May be less than one in which case * jobs are performed probabalistically. If this is zero, jobs will not be done * during ordinary apache requests. In this case, maintenance/runJobs.php should * be run periodically. */ $wgJobRunRate = 1; /** * Number of rows to update per job */ $wgUpdateRowsPerJob = 500; /** * Number of rows to update per query */ $wgUpdateRowsPerQuery = 10; /** * Enable AJAX framework */ $wgUseAjax = true; /** * List of Ajax-callable functions. * Extensions acting as Ajax callbacks must register here */ $wgAjaxExportList = array( 'wfAjaxGetThumbnailUrl', 'wfAjaxGetFileUrl' ); /** * Enable watching/unwatching pages using AJAX. * Requires $wgUseAjax to be true too. * Causes wfAjaxWatch to be added to $wgAjaxExportList */ $wgAjaxWatch = true; /** * Enable AJAX check for file overwrite, pre-upload */ $wgAjaxUploadDestCheck = true; /** * Enable previewing licences via AJAX */ $wgAjaxLicensePreview = true; /** * Allow DISPLAYTITLE to change title display */ $wgAllowDisplayTitle = true; /** * for consistency, restrict DISPLAYTITLE to titles that normalize to the same canonical DB key */ $wgRestrictDisplayTitle = true; /** * Array of usernames which may not be registered or logged in from * Maintenance scripts can still use these */ $wgReservedUsernames = array( 'MediaWiki default', // Default 'Main Page' and MediaWiki: message pages 'Conversion script', // Used for the old Wikipedia software upgrade 'Maintenance script', // Maintenance scripts which perform editing, image import script 'Template namespace initialisation script', // Used in 1.2->1.3 upgrade 'msg:double-redirect-fixer', // Automatic double redirect fix ); /** * MediaWiki will reject HTMLesque tags in uploaded files due to idiotic browsers which can't * perform basic stuff like MIME detection and which are vulnerable to further idiots uploading * crap files as images. When this directive is on,