'GlobalVarConfig::newInstance' ); /** * MediaWiki version number * @since 1.2 */ $wgVersion = '1.26.1'; /** * Name of the site. It must be changed in LocalSettings.php */ $wgSitename = 'MediaWiki'; /** * When the wiki is running behind a proxy and this is set to true, assumes that the proxy exposes * the wiki on the standard ports (443 for https and 80 for http). * @var bool * @since 1.26 */ $wgAssumeProxiesUseDefaultProtocolPorts = true; /** * URL of the server. * * @par Example: * @code * $wgServer = 'http://example.com'; * @endcode * * This is usually detected correctly by MediaWiki. If MediaWiki detects the * wrong server, it will redirect incorrectly after you save a page. In that * case, set this variable to fix it. * * If you want to use protocol-relative URLs on your wiki, set this to a * protocol-relative URL like '//example.com' and set $wgCanonicalServer * to a fully qualified URL. */ $wgServer = WebRequest::detectServer(); /** * Canonical URL of the server, to use in IRC feeds and notification e-mails. * Must be fully qualified, even if $wgServer is protocol-relative. * * Defaults to $wgServer, expanded to a fully qualified http:// URL if needed. * @since 1.18 */ $wgCanonicalServer = false; /** * Server name. This is automatically computed by parsing the bare * hostname out of $wgCanonicalServer. It should not be customized. * @since 1.24 */ $wgServerName = false; /************************************************************************//** * @name Script path settings * @{ */ /** * The path we should point to. * It might be a virtual path in case with use apache mod_rewrite for example. * * This *needs* to be set correctly. * * Other paths will be set to defaults based on it unless they are directly * set in LocalSettings.php */ $wgScriptPath = '/wiki'; /** * Whether to support URLs like index.php/Page_title These often break when PHP * is set up in CGI mode. PATH_INFO *may* be correct if cgi.fix_pathinfo is set, * but then again it may not; lighttpd converts incoming path data to lowercase * on systems with case-insensitive filesystems, and there have been reports of * problems on Apache as well. * * To be safe we'll continue to keep it off by default. * * Override this to false if $_SERVER['PATH_INFO'] contains unexpectedly * incorrect garbage, or to true if it is really correct. * * The default $wgArticlePath will be set based on this value at runtime, but if * you have customized it, having this incorrectly set to true can cause * redirect loops when "pretty URLs" are used. * @since 1.2.1 */ $wgUsePathInfo = ( strpos( PHP_SAPI, 'cgi' ) === false ) && ( strpos( PHP_SAPI, 'apache2filter' ) === false ) && ( strpos( PHP_SAPI, 'isapi' ) === false ); /** * The extension to append to script names by default. * * Some hosting providers used PHP 4 for *.php files, and PHP 5 for *.php5. * This variable was provided to support those providers. * * @since 1.11 * @deprecated since 1.25; support for '.php5' is being phased out of MediaWiki * proper. Backward-compatibility can be maintained by configuring your web * server to rewrite URLs. See RELEASE-NOTES for details. */ $wgScriptExtension = '.php'; /**@}*/ /************************************************************************//** * @name URLs and file paths * * These various web and file path variables are set to their defaults * in Setup.php if they are not explicitly set from LocalSettings.php. * * These will relatively rarely need to be set manually, unless you are * splitting style sheets or images outside the main document root. * * In this section, a "path" is usually a host-relative URL, i.e. a URL without * the host part, that starts with a slash. In most cases a full URL is also * acceptable. A "directory" is a local file path. * * In both paths and directories, trailing slashes should not be included. * * @{ */ /** * The URL path to index.php. * * Defaults to "{$wgScriptPath}/index{$wgScriptExtension}". */ $wgScript = false; /** * The URL path to load.php. * * Defaults to "{$wgScriptPath}/load{$wgScriptExtension}". * @since 1.17 */ $wgLoadScript = false; /** * The URL path of the skins directory. * Defaults to "{$wgResourceBasePath}/skins". * @since 1.3 */ $wgStylePath = false; $wgStyleSheetPath = &$wgStylePath; /** * The URL path of the skins directory. Should not point to an external domain. * Defaults to "{$wgScriptPath}/skins". * @since 1.17 */ $wgLocalStylePath = false; /** * The URL path of the extensions directory. * Defaults to "{$wgResourceBasePath}/extensions". * @since 1.16 */ $wgExtensionAssetsPath = false; /** * Filesystem extensions directory. * Defaults to "{$IP}/extensions". * @since 1.25 */ $wgExtensionDirectory = "{$IP}/extensions"; /** * Filesystem stylesheets directory. * Defaults to "{$IP}/skins". * @since 1.3 */ $wgStyleDirectory = "{$IP}/skins"; /** * The URL path for primary article page views. This path should contain $1, * which is replaced by the article title. * * Defaults to "{$wgScript}/$1" or "{$wgScript}?title=$1", * depending on $wgUsePathInfo. */ $wgArticlePath = false; /** * The URL path for the images directory. * Defaults to "{$wgScriptPath}/images". */ $wgUploadPath = false; /** * The filesystem path of the images directory. Defaults to "{$IP}/images". */ $wgUploadDirectory = false; /** * Directory where the cached page will be saved. * Defaults to "{$wgUploadDirectory}/cache". */ $wgFileCacheDirectory = false; /** * The URL path of the wiki logo. The logo size should be 135x135 pixels. * Defaults to "$wgResourceBasePath/resources/assets/wiki.png". */ $wgLogo = false; /** * Array with URL paths to HD versions of the wiki logo. The scaled logo size * should be under 135x155 pixels. * Only 1.5x and 2x versions are supported. * * @par Example: * @code * $wgLogoHD = array( * "1.5x" => "path/to/1.5x_version.png", * "2x" => "path/to/2x_version.png" * ); * @endcode * * @since 1.25 */ $wgLogoHD = false; /** * The URL path of the shortcut icon. * @since 1.6 */ $wgFavicon = '/favicon.ico'; /** * The URL path of the icon for iPhone and iPod Touch web app bookmarks. * Defaults to no icon. * @since 1.12 */ $wgAppleTouchIcon = false; /** * Value for the referrer policy meta tag. * One of 'never', 'default', 'origin', 'always'. Setting it to false just * prevents the meta tag from being output. * See http://www.w3.org/TR/referrer-policy/ for details. * * @since 1.25 */ $wgReferrerPolicy = false; /** * The local filesystem path to a temporary directory. This is not required to * be web accessible. * * When this setting is set to false, its value will be set through a call * to wfTempDir(). See that methods implementation for the actual detection * logic. * * Developers should use the global function wfTempDir() instead of this * variable. * * @see wfTempDir() * @note Default changed to false in MediaWiki 1.20. */ $wgTmpDirectory = false; /** * If set, this URL is added to the start of $wgUploadPath to form a complete * upload URL. * @since 1.4 */ $wgUploadBaseUrl = ''; /** * To enable remote on-demand scaling, set this to the thumbnail base URL. * Full thumbnail URL will be like $wgUploadStashScalerBaseUrl/e/e6/Foo.jpg/123px-Foo.jpg * where 'e6' are the first two characters of the MD5 hash of the file name. * If $wgUploadStashScalerBaseUrl is set to false, thumbs are rendered locally as needed. * @since 1.17 */ $wgUploadStashScalerBaseUrl = false; /** * To set 'pretty' URL paths for actions other than * plain page views, add to this array. * * @par Example: * Set pretty URL for the edit action: * @code * 'edit' => "$wgScriptPath/edit/$1" * @endcode * * There must be an appropriate script or rewrite rule in place to handle these * URLs. * @since 1.5 */ $wgActionPaths = array(); /**@}*/ /************************************************************************//** * @name Files and file uploads * @{ */ /** * Uploads have to be specially set up to be secure */ $wgEnableUploads = false; /** * The maximum age of temporary (incomplete) uploaded files */ $wgUploadStashMaxAge = 6 * 3600; // 6 hours /** * Allows to move images and other media files */ $wgAllowImageMoving = true; /** * Enable deferred upload tasks that use the job queue. * Only enable this if job runners are set up for both the * 'AssembleUploadChunks' and 'PublishStashedFile' job types. * * @note If you use suhosin, this setting is incompatible with * suhosin.session.encrypt. */ $wgEnableAsyncUploads = false; /** * These are additional characters that should be replaced with '-' in filenames */ $wgIllegalFileChars = ":"; /** * What directory to place deleted uploads in. * Defaults to "{$wgUploadDirectory}/deleted". */ $wgDeletedDirectory = false; /** * Set this to true if you use img_auth and want the user to see details on why access failed. */ $wgImgAuthDetails = false; /** * Map of relative URL directories to match to internal mwstore:// base storage paths. * For img_auth.php requests, everything after "img_auth.php/" is checked to see * if starts with any of the prefixes defined here. The prefixes should not overlap. * The prefix that matches has a corresponding storage path, which the rest of the URL * is assumed to be relative to. The file at that path (or a 404) is send to the client. * * Example: * $wgImgAuthUrlPathMap['/timeline/'] = 'mwstore://local-fs/timeline-render/'; * The above maps ".../img_auth.php/timeline/X" to "mwstore://local-fs/timeline-render/". * The name "local-fs" should correspond by name to an entry in $wgFileBackends. * * @see $wgFileBackends */ $wgImgAuthUrlPathMap = array(); /** * File repository structures * * $wgLocalFileRepo is a single repository structure, and $wgForeignFileRepos is * an array of such structures. Each repository structure is an associative * array of properties configuring the repository. * * Properties required for all repos: * - class The class name for the repository. May come from the core or an extension. * The core repository classes are FileRepo, LocalRepo, ForeignDBRepo. * FSRepo is also supported for backwards compatibility. * * - name A unique name for the repository (but $wgLocalFileRepo should be 'local'). * The name should consist of alpha-numeric characters. * - backend A file backend name (see $wgFileBackends). * * For most core repos: * - zones Associative array of zone names that each map to an array with: * container : backend container name the zone is in * directory : root path within container for the zone * url : base URL to the root of the zone * urlsByExt : map of file extension types to base URLs * (useful for using a different cache for videos) * Zones default to using "-" as the container name * and default to using the container root as the zone's root directory. * Nesting of zone locations within other zones should be avoided. * - url Public zone URL. The 'zones' settings take precedence. * - hashLevels The number of directory levels for hash-based division of files * - thumbScriptUrl The URL for thumb.php (optional, not recommended) * - transformVia404 Whether to skip media file transformation on parse and rely on a 404 * handler instead. * - initialCapital Equivalent to $wgCapitalLinks (or $wgCapitalLinkOverrides[NS_FILE], * determines whether filenames implicitly start with a capital letter. * The current implementation may give incorrect description page links * when the local $wgCapitalLinks and initialCapital are mismatched. * - pathDisclosureProtection * May be 'paranoid' to remove all parameters from error messages, 'none' to * leave the paths in unchanged, or 'simple' to replace paths with * placeholders. Default for LocalRepo is 'simple'. * - fileMode This allows wikis to set the file mode when uploading/moving files. Default * is 0644. * - directory The local filesystem directory where public files are stored. Not used for * some remote repos. * - thumbDir The base thumbnail directory. Defaults to "/thumb". * - thumbUrl The base thumbnail URL. Defaults to "/thumb". * - isPrivate Set this if measures should always be taken to keep the files private. * One should not trust this to assure that the files are not web readable; * the server configuration should be done manually depending on the backend. * * These settings describe a foreign MediaWiki installation. They are optional, and will be ignored * for local repositories: * - descBaseUrl URL of image description pages, e.g. https://en.wikipedia.org/wiki/File: * - scriptDirUrl URL of the MediaWiki installation, equivalent to $wgScriptPath, e.g. * https://en.wikipedia.org/w * - scriptExtension Script extension of the MediaWiki installation, equivalent to * $wgScriptExtension, e.g. .php5 defaults to .php * * - articleUrl Equivalent to $wgArticlePath, e.g. https://en.wikipedia.org/wiki/$1 * - fetchDescription Fetch the text of the remote file description page. Equivalent to * $wgFetchCommonsDescriptions. * - abbrvThreshold File names over this size will use the short form of thumbnail names. * Short thumbnail names only have the width, parameters, and the extension. * * ForeignDBRepo: * - dbType, dbServer, dbUser, dbPassword, dbName, dbFlags * equivalent to the corresponding member of $wgDBservers * - tablePrefix Table prefix, the foreign wiki's $wgDBprefix * - hasSharedCache True if the wiki's shared cache is accessible via the local $wgMemc * * ForeignAPIRepo: * - apibase Use for the foreign API's URL * - apiThumbCacheExpiry How long to locally cache thumbs for * * If you leave $wgLocalFileRepo set to false, Setup will fill in appropriate values. * Otherwise, set $wgLocalFileRepo to a repository structure as described above. * If you set $wgUseInstantCommons to true, it will add an entry for Commons. * If you set $wgForeignFileRepos to an array of repository structures, those will * be searched after the local file repo. * Otherwise, you will only have access to local media files. * * @see Setup.php for an example usage and default initialization. */ $wgLocalFileRepo = false; /** * @see $wgLocalFileRepo */ $wgForeignFileRepos = array(); /** * Use Commons as a remote file repository. Essentially a wrapper, when this * is enabled $wgForeignFileRepos will point at Commons with a set of default * settings */ $wgUseInstantCommons = false; /** * Array of foreign file repo names (set in $wgForeignFileRepos above) that * are allowable upload targets. These wikis must have some method of * authentication (i.e. CentralAuth), and be CORS-enabled for this wiki. * * Example: * $wgForeignUploadTargets = array( 'shared' ); */ $wgForeignUploadTargets = array(); /** * File backend structure configuration. * * This is an array of file backend configuration arrays. * Each backend configuration has the following parameters: * - 'name' : A unique name for the backend * - 'class' : The file backend class to use * - 'wikiId' : A unique string that identifies the wiki (container prefix) * - 'lockManager' : The name of a lock manager (see $wgLockManagers) * * See FileBackend::__construct() for more details. * Additional parameters are specific to the file backend class used. * These settings should be global to all wikis when possible. * * There are two particularly important aspects about each backend: * - a) Whether it is fully qualified or wiki-relative. * By default, the paths of files are relative to the current wiki, * which works via prefixing them with the current wiki ID when accessed. * Setting 'wikiId' forces the backend to be fully qualified by prefixing * all paths with the specified value instead. This can be useful if * multiple wikis need to share the same data. Note that 'name' is *not* * part of any prefix and thus should not be relied upon for namespacing. * - b) Whether it is only defined for some wikis or is defined on all * wikis in the wiki farm. Defining a backend globally is useful * if multiple wikis need to share the same data. * One should be aware of these aspects when configuring a backend for use with * any basic feature or plugin. For example, suppose an extension stores data for * different wikis in different directories and sometimes needs to access data from * a foreign wiki's directory in order to render a page on given wiki. The extension * would need a fully qualified backend that is defined on all wikis in the wiki farm. */ $wgFileBackends = array(); /** * Array of configuration arrays for each lock manager. * Each backend configuration has the following parameters: * - 'name' : A unique name for the lock manager * - 'class' : The lock manger class to use * * See LockManager::__construct() for more details. * Additional parameters are specific to the lock manager class used. * These settings should be global to all wikis. */ $wgLockManagers = array(); /** * Show Exif data, on by default if available. * Requires PHP's Exif extension: http://www.php.net/manual/en/ref.exif.php * * @note FOR WINDOWS USERS: * To enable Exif functions, add the following lines to the "Windows * extensions" section of php.ini: * @code{.ini} * extension=extensions/php_mbstring.dll * extension=extensions/php_exif.dll * @endcode */ $wgShowEXIF = function_exists( 'exif_read_data' ); /** * If to automatically update the img_metadata field * if the metadata field is outdated but compatible with the current version. * Defaults to false. */ $wgUpdateCompatibleMetadata = false; /** * If you operate multiple wikis, you can define a shared upload path here. * Uploads to this wiki will NOT be put there - they will be put into * $wgUploadDirectory. * If $wgUseSharedUploads is set, the wiki will look in the shared repository if * no file of the given name is found in the local repository (for [[File:..]], * [[Media:..]] links). Thumbnails will also be looked for and generated in this * directory. * * Note that these configuration settings can now be defined on a per- * repository basis for an arbitrary number of file repositories, using the * $wgForeignFileRepos variable. */ $wgUseSharedUploads = false; /** * Full path on the web server where shared uploads can be found */ $wgSharedUploadPath = "http://commons.wikimedia.org/shared/images"; /** * Fetch commons image description pages and display them on the local wiki? */ $wgFetchCommonsDescriptions = false; /** * Path on the file system where shared uploads can be found. */ $wgSharedUploadDirectory = "/var/www/wiki3/images"; /** * DB name with metadata about shared directory. * Set this to false if the uploads do not come from a wiki. */ $wgSharedUploadDBname = false; /** * Optional table prefix used in database. */ $wgSharedUploadDBprefix = ''; /** * Cache shared metadata in memcached. * Don't do this if the commons wiki is in a different memcached domain */ $wgCacheSharedUploads = true; /** * Allow for upload to be copied from an URL. * The timeout for copy uploads is set by $wgCopyUploadTimeout. * You have to assign the user right 'upload_by_url' to a user group, to use this. */ $wgAllowCopyUploads = false; /** * Allow asynchronous copy uploads. * This feature is experimental and broken as of r81612. */ $wgAllowAsyncCopyUploads = false; /** * A list of domains copy uploads can come from * * @since 1.20 */ $wgCopyUploadsDomains = array(); /** * Enable copy uploads from Special:Upload. $wgAllowCopyUploads must also be * true. If $wgAllowCopyUploads is true, but this is false, you will only be * able to perform copy uploads from the API or extensions (e.g. UploadWizard). */ $wgCopyUploadsFromSpecialUpload = false; /** * Proxy to use for copy upload requests. * @since 1.20 */ $wgCopyUploadProxy = false; /** * Different timeout for upload by url * This could be useful since when fetching large files, you may want a * timeout longer than the default $wgHTTPTimeout. False means fallback * to default. * * @since 1.22 */ $wgCopyUploadTimeout = false; /** * Different timeout for upload by url when run as a background job * This could be useful since when fetching large files via job queue, * you may want a different timeout, especially because there is no * http request being kept alive. * * false means fallback to $wgCopyUploadTimeout. * @since 1.22 */ $wgCopyUploadAsyncTimeout = false; /** * Max size for uploads, in bytes. If not set to an array, applies to all * uploads. If set to an array, per upload type maximums can be set, using the * file and url keys. If the * key is set this value will be used as maximum * for non-specified types. * * @par Example: * @code * $wgMaxUploadSize = array( * '*' => 250 * 1024, * 'url' => 500 * 1024, * ); * @endcode * Sets the maximum for all uploads to 250 kB except for upload-by-url, which * will have a maximum of 500 kB. */ $wgMaxUploadSize = 1024 * 1024 * 100; # 100MB /** * Minimum upload chunk size, in bytes. When using chunked upload, non-final * chunks smaller than this will be rejected. May be reduced based on the * 'upload_max_filesize' or 'post_max_size' PHP settings. * @since 1.26 */ $wgMinUploadChunkSize = 1024; # 1KB /** * Point the upload navigation link to an external URL * Useful if you want to use a shared repository by default * without disabling local uploads (use $wgEnableUploads = false for that). * * @par Example: * @code * $wgUploadNavigationUrl = 'https://commons.wikimedia.org/wiki/Special:Upload'; * @endcode */ $wgUploadNavigationUrl = false; /** * Point the upload link for missing files to an external URL, as with * $wgUploadNavigationUrl. The URL will get "(?|&)wpDestFile=" * appended to it as appropriate. */ $wgUploadMissingFileUrl = false; /** * Give a path here to use thumb.php for thumbnail generation on client * request, instead of generating them on render and outputting a static URL. * This is necessary if some of your apache servers don't have read/write * access to the thumbnail path. * * @par Example: * @code * $wgThumbnailScriptPath = "{$wgScriptPath}/thumb{$wgScriptExtension}"; * @endcode */ $wgThumbnailScriptPath = false; /** * @see $wgThumbnailScriptPath */ $wgSharedThumbnailScriptPath = false; /** * Set this to false if you do not want MediaWiki to divide your images * directory into many subdirectories, for improved performance. * * It's almost always good to leave this enabled. In previous versions of * MediaWiki, some users set this to false to allow images to be added to the * wiki by simply copying them into $wgUploadDirectory and then running * maintenance/rebuildImages.php to register them in the database. This is no * longer recommended, use maintenance/importImages.php instead. * * @note That this variable may be ignored if $wgLocalFileRepo is set. * @todo Deprecate the setting and ultimately remove it from Core. */ $wgHashedUploadDirectory = true; /** * Set the following to false especially if you have a set of files that need to * be accessible by all wikis, and you do not want to use the hash (path/a/aa/) * directory layout. */ $wgHashedSharedUploadDirectory = true; /** * Base URL for a repository wiki. Leave this blank if uploads are just stored * in a shared directory and not meant to be accessible through a separate wiki. * Otherwise the image description pages on the local wiki will link to the * image description page on this wiki. * * Please specify the namespace, as in the example below. */ $wgRepositoryBaseUrl = "https://commons.wikimedia.org/wiki/File:"; /** * This is the list of preferred extensions for uploading files. Uploading files * with extensions not in this list will trigger a warning. * * @warning If you add any OpenOffice or Microsoft Office file formats here, * such as odt or doc, and untrusted users are allowed to upload files, then * your wiki will be vulnerable to cross-site request forgery (CSRF). */ $wgFileExtensions = array( 'png', 'gif', 'jpg', 'jpeg' ); /** * Files with these extensions will never be allowed as uploads. * An array of file extensions to blacklist. You should append to this array * if you want to blacklist additional files. */ $wgFileBlacklist = array( # HTML may contain cookie-stealing JavaScript and web bugs 'html', 'htm', 'js', 'jsb', 'mhtml', 'mht', 'xhtml', 'xht', # PHP scripts may execute arbitrary code on the server 'php', 'phtml', 'php3', 'php4', 'php5', 'phps', # Other types that may be interpreted by some servers 'shtml', 'jhtml', 'pl', 'py', 'cgi', # May contain harmful executables for Windows victims 'exe', 'scr', 'dll', 'msi', 'vbs', 'bat', 'com', 'pif', 'cmd', 'vxd', 'cpl' ); /** * Files with these MIME types will never be allowed as uploads * if $wgVerifyMimeType is enabled. */ $wgMimeTypeBlacklist = array( # HTML may contain cookie-stealing JavaScript and web bugs 'text/html', 'text/javascript', 'text/x-javascript', 'application/x-shellscript', # PHP scripts may execute arbitrary code on the server 'application/x-php', 'text/x-php', # Other types that may be interpreted by some servers 'text/x-python', 'text/x-perl', 'text/x-bash', 'text/x-sh', 'text/x-csh', # Client-side hazards on Internet Explorer 'text/scriptlet', 'application/x-msdownload', # Windows metafile, client-side vulnerability on some systems 'application/x-msmetafile', ); /** * Allow Java archive uploads. * This is not recommended for public wikis since a maliciously-constructed * applet running on the same domain as the wiki can steal the user's cookies. */ $wgAllowJavaUploads = false; /** * This is a flag to determine whether or not to check file extensions on upload. * * @warning Setting this to false is insecure for public wikis. */ $wgCheckFileExtensions = true; /** * If this is turned off, users may override the warning for files not covered * by $wgFileExtensions. * * @warning Setting this to false is insecure for public wikis. */ $wgStrictFileExtensions = true; /** * Setting this to true will disable the upload system's checks for HTML/JavaScript. * * @warning THIS IS VERY DANGEROUS on a publicly editable site, so USE * $wgGroupPermissions TO RESTRICT UPLOADING to only those that you trust */ $wgDisableUploadScriptChecks = false; /** * Warn if uploaded files are larger than this (in bytes), or false to disable */ $wgUploadSizeWarning = false; /** * list of trusted media-types and MIME types. * Use the MEDIATYPE_xxx constants to represent media types. * This list is used by File::isSafeFile * * Types not listed here will have a warning about unsafe content * displayed on the images description page. It would also be possible * to use this for further restrictions, like disabling direct * [[media:...]] links for non-trusted formats. */ $wgTrustedMediaFormats = array( MEDIATYPE_BITMAP, //all bitmap formats MEDIATYPE_AUDIO, //all audio formats MEDIATYPE_VIDEO, //all plain video formats "image/svg+xml", //svg (only needed if inline rendering of svg is not supported) "application/pdf", //PDF files #"application/x-shockwave-flash", //flash/shockwave movie ); /** * Plugins for media file type handling. * Each entry in the array maps a MIME type to a class name */ $wgMediaHandlers = array( 'image/jpeg' => 'JpegHandler', 'image/png' => 'PNGHandler', 'image/gif' => 'GIFHandler', 'image/tiff' => 'TiffHandler', 'image/webp' => 'WebPHandler', 'image/x-ms-bmp' => 'BmpHandler', 'image/x-bmp' => 'BmpHandler', 'image/x-xcf' => 'XCFHandler', 'image/svg+xml' => 'SvgHandler', // official 'image/svg' => 'SvgHandler', // compat 'image/vnd.djvu' => 'DjVuHandler', // official 'image/x.djvu' => 'DjVuHandler', // compat 'image/x-djvu' => 'DjVuHandler', // compat ); /** * Plugins for page content model handling. * Each entry in the array maps a model id to a class name. * * @since 1.21 */ $wgContentHandlers = array( // the usual case CONTENT_MODEL_WIKITEXT => 'WikitextContentHandler', // dumb version, no syntax highlighting CONTENT_MODEL_JAVASCRIPT => 'JavaScriptContentHandler', // simple implementation, for use by extensions, etc. CONTENT_MODEL_JSON => 'JsonContentHandler', // dumb version, no syntax highlighting CONTENT_MODEL_CSS => 'CssContentHandler', // plain text, for use by extensions, etc. CONTENT_MODEL_TEXT => 'TextContentHandler', ); /** * Whether to enable server-side image thumbnailing. If false, images will * always be sent to the client in full resolution, with appropriate width= and * height= attributes on the tag for the client to do its own scaling. */ $wgUseImageResize = true; /** * Resizing can be done using PHP's internal image libraries or using * ImageMagick or another third-party converter, e.g. GraphicMagick. * These support more file formats than PHP, which only supports PNG, * GIF, JPG, XBM and WBMP. * * Use Image Magick instead of PHP builtin functions. */ $wgUseImageMagick = false; /** * The convert command shipped with ImageMagick */ $wgImageMagickConvertCommand = '/usr/bin/convert'; /** * Sharpening parameter to ImageMagick */ $wgSharpenParameter = '0x0.4'; /** * Reduction in linear dimensions below which sharpening will be enabled */ $wgSharpenReductionThreshold = 0.85; /** * Temporary directory used for ImageMagick. The directory must exist. Leave * this set to false to let ImageMagick decide for itself. */ $wgImageMagickTempDir = false; /** * Use another resizing converter, e.g. GraphicMagick * %s will be replaced with the source path, %d with the destination * %w and %h will be replaced with the width and height. * * @par Example for GraphicMagick: * @code * $wgCustomConvertCommand = "gm convert %s -resize %wx%h %d" * @endcode * * Leave as false to skip this. */ $wgCustomConvertCommand = false; /** * used for lossless jpeg rotation * * @since 1.21 */ $wgJpegTran = '/usr/bin/jpegtran'; /** * Some tests and extensions use exiv2 to manipulate the Exif metadata in some * image formats. */ $wgExiv2Command = '/usr/bin/exiv2'; /** * Path to exiftool binary. Used for lossless ICC profile swapping. * * @since 1.26 */ $wgExiftool = '/usr/bin/exiftool'; /** * Scalable Vector Graphics (SVG) may be uploaded as images. * Since SVG support is not yet standard in browsers, it is * necessary to rasterize SVGs to PNG as a fallback format. * * An external program is required to perform this conversion. * If set to an array, the first item is a PHP callable and any further items * are passed as parameters after $srcPath, $dstPath, $width, $height */ $wgSVGConverters = array( 'ImageMagick' => '$path/convert -background "#ffffff00" -thumbnail $widthx$height\! $input PNG:$output', 'sodipodi' => '$path/sodipodi -z -w $width -f $input -e $output', 'inkscape' => '$path/inkscape -z -w $width -f $input -e $output', 'batik' => 'java -Djava.awt.headless=true -jar $path/batik-rasterizer.jar -w $width -d ' . '$output $input', 'rsvg' => '$path/rsvg-convert -w $width -h $height -o $output $input', 'imgserv' => '$path/imgserv-wrapper -i svg -o png -w$width $input $output', 'ImagickExt' => array( 'SvgHandler::rasterizeImagickExt' ), ); /** * Pick a converter defined in $wgSVGConverters */ $wgSVGConverter = 'ImageMagick'; /** * If not in the executable PATH, specify the SVG converter path. */ $wgSVGConverterPath = ''; /** * Don't scale a SVG larger than this */ $wgSVGMaxSize = 5120; /** * Don't read SVG metadata beyond this point. * Default is 1024*256 bytes */ $wgSVGMetadataCutoff = 262144; /** * Disallow