= 5.4.0
// http://php.net/gzdecode
if ( !function_exists( 'gzdecode' ) ) {
/**
* @codeCoverageIgnore
* @param string $data
* @return string
*/
function gzdecode( $data ) {
return gzinflate( substr( $data, 10, -8 ) );
}
}
// hash_equals function only exists in PHP >= 5.6.0
// http://php.net/hash_equals
if ( !function_exists( 'hash_equals' ) ) {
/**
* Check whether a user-provided string is equal to a fixed-length secret string
* without revealing bytes of the secret string through timing differences.
*
* The usual way to compare strings (PHP's === operator or the underlying memcmp()
* function in C) is to compare corresponding bytes and stop at the first difference,
* which would take longer for a partial match than for a complete mismatch. This
* is not secure when one of the strings (e.g. an HMAC or token) must remain secret
* and the other may come from an attacker. Statistical analysis of timing measurements
* over many requests may allow the attacker to guess the string's bytes one at a time
* (and check his guesses) even if the timing differences are extremely small.
*
* When making such a security-sensitive comparison, it is essential that the sequence
* in which instructions are executed and memory locations are accessed not depend on
* the secret string's value. HOWEVER, for simplicity, we do not attempt to minimize
* the inevitable leakage of the string's length. That is generally known anyway as
* a chararacteristic of the hash function used to compute the secret value.
*
* Longer explanation: http://www.emerose.com/timing-attacks-explained
*
* @codeCoverageIgnore
* @param string $known_string Fixed-length secret string to compare against
* @param string $user_string User-provided string
* @return bool True if the strings are the same, false otherwise
*/
function hash_equals( $known_string, $user_string ) {
// Strict type checking as in PHP's native implementation
if ( !is_string( $known_string ) ) {
trigger_error( 'hash_equals(): Expected known_string to be a string, ' .
gettype( $known_string ) . ' given', E_USER_WARNING );
return false;
}
if ( !is_string( $user_string ) ) {
trigger_error( 'hash_equals(): Expected user_string to be a string, ' .
gettype( $user_string ) . ' given', E_USER_WARNING );
return false;
}
$known_string_len = strlen( $known_string );
if ( $known_string_len !== strlen( $user_string ) ) {
return false;
}
$result = 0;
for ( $i = 0; $i < $known_string_len; $i++ ) {
$result |= ord( $known_string[$i] ) ^ ord( $user_string[$i] );
}
return ( $result === 0 );
}
}
/// @endcond
/**
* Load an extension
*
* This queues an extension to be loaded through
* the ExtensionRegistry system.
*
* @param string $ext Name of the extension to load
* @param string|null $path Absolute path of where to find the extension.json file
*/
function wfLoadExtension( $ext, $path = null ) {
if ( !$path ) {
global $wgExtensionDirectory;
$path = "$wgExtensionDirectory/$ext/extension.json";
}
ExtensionRegistry::getInstance()->queue( $path );
}
/**
* Load multiple extensions at once
*
* Same as wfLoadExtension, but more efficient if you
* are loading multiple extensions.
*
* If you want to specify custom paths, you should interact with
* ExtensionRegistry directly.
*
* @see wfLoadExtension
* @param string[] $exts Array of extension names to load
*/
function wfLoadExtensions( array $exts ) {
global $wgExtensionDirectory;
$registry = ExtensionRegistry::getInstance();
foreach ( $exts as $ext ) {
$registry->queue( "$wgExtensionDirectory/$ext/extension.json" );
}
}
/**
* Load a skin
*
* @see wfLoadExtension
* @param string $skin Name of the extension to load
* @param string|null $path Absolute path of where to find the skin.json file
*/
function wfLoadSkin( $skin, $path = null ) {
if ( !$path ) {
global $wgStyleDirectory;
$path = "$wgStyleDirectory/$skin/skin.json";
}
ExtensionRegistry::getInstance()->queue( $path );
}
/**
* Load multiple skins at once
*
* @see wfLoadExtensions
* @param string[] $skins Array of extension names to load
*/
function wfLoadSkins( array $skins ) {
global $wgStyleDirectory;
$registry = ExtensionRegistry::getInstance();
foreach ( $skins as $skin ) {
$registry->queue( "$wgStyleDirectory/$skin/skin.json" );
}
}
/**
* Like array_diff( $a, $b ) except that it works with two-dimensional arrays.
* @param array $a
* @param array $b
* @return array
*/
function wfArrayDiff2( $a, $b ) {
return array_udiff( $a, $b, 'wfArrayDiff2_cmp' );
}
/**
* @param array|string $a
* @param array|string $b
* @return int
*/
function wfArrayDiff2_cmp( $a, $b ) {
if ( is_string( $a ) && is_string( $b ) ) {
return strcmp( $a, $b );
} elseif ( count( $a ) !== count( $b ) ) {
return count( $a ) < count( $b ) ? -1 : 1;
} else {
reset( $a );
reset( $b );
while ( ( list( , $valueA ) = each( $a ) ) && ( list( , $valueB ) = each( $b ) ) ) {
$cmp = strcmp( $valueA, $valueB );
if ( $cmp !== 0 ) {
return $cmp;
}
}
return 0;
}
}
/**
* Appends to second array if $value differs from that in $default
*
* @param string|int $key
* @param mixed $value
* @param mixed $default
* @param array $changed Array to alter
* @throws MWException
*/
function wfAppendToArrayIfNotDefault( $key, $value, $default, &$changed ) {
if ( is_null( $changed ) ) {
throw new MWException( 'GlobalFunctions::wfAppendToArrayIfNotDefault got null' );
}
if ( $default[$key] !== $value ) {
$changed[$key] = $value;
}
}
/**
* Merge arrays in the style of getUserPermissionsErrors, with duplicate removal
* e.g.
* wfMergeErrorArrays(
* array( array( 'x' ) ),
* array( array( 'x', '2' ) ),
* array( array( 'x' ) ),
* array( array( 'y' ) )
* );
* returns:
* array(
* array( 'x', '2' ),
* array( 'x' ),
* array( 'y' )
* )
*
* @param array $array1,...
* @return array
*/
function wfMergeErrorArrays( /*...*/ ) {
$args = func_get_args();
$out = array();
foreach ( $args as $errors ) {
foreach ( $errors as $params ) {
# @todo FIXME: Sometimes get nested arrays for $params,
# which leads to E_NOTICEs
$spec = implode( "\t", $params );
$out[$spec] = $params;
}
}
return array_values( $out );
}
/**
* Insert array into another array after the specified *KEY*
*
* @param array $array The array.
* @param array $insert The array to insert.
* @param mixed $after The key to insert after
* @return array
*/
function wfArrayInsertAfter( array $array, array $insert, $after ) {
// Find the offset of the element to insert after.
$keys = array_keys( $array );
$offsetByKey = array_flip( $keys );
$offset = $offsetByKey[$after];
// Insert at the specified offset
$before = array_slice( $array, 0, $offset + 1, true );
$after = array_slice( $array, $offset + 1, count( $array ) - $offset, true );
$output = $before + $insert + $after;
return $output;
}
/**
* Recursively converts the parameter (an object) to an array with the same data
*
* @param object|array $objOrArray
* @param bool $recursive
* @return array
*/
function wfObjectToArray( $objOrArray, $recursive = true ) {
$array = array();
if ( is_object( $objOrArray ) ) {
$objOrArray = get_object_vars( $objOrArray );
}
foreach ( $objOrArray as $key => $value ) {
if ( $recursive && ( is_object( $value ) || is_array( $value ) ) ) {
$value = wfObjectToArray( $value );
}
$array[$key] = $value;
}
return $array;
}
/**
* Get a random decimal value between 0 and 1, in a way
* not likely to give duplicate values for any realistic
* number of articles.
*
* @return string
*/
function wfRandom() {
# The maximum random value is "only" 2^31-1, so get two random
# values to reduce the chance of dupes
$max = mt_getrandmax() + 1;
$rand = number_format( ( mt_rand() * $max + mt_rand() ) / $max / $max, 12, '.', '' );
return $rand;
}
/**
* Get a random string containing a number of pseudo-random hex
* characters.
* @note This is not secure, if you are trying to generate some sort
* of token please use MWCryptRand instead.
*
* @param int $length The length of the string to generate
* @return string
* @since 1.20
*/
function wfRandomString( $length = 32 ) {
$str = '';
for ( $n = 0; $n < $length; $n += 7 ) {
$str .= sprintf( '%07x', mt_rand() & 0xfffffff );
}
return substr( $str, 0, $length );
}
/**
* We want some things to be included as literal characters in our title URLs
* for prettiness, which urlencode encodes by default. According to RFC 1738,
* all of the following should be safe:
*
* ;:@&=$-_.+!*'(),
*
* But + is not safe because it's used to indicate a space; &= are only safe in
* paths and not in queries (and we don't distinguish here); ' seems kind of
* scary; and urlencode() doesn't touch -_. to begin with. Plus, although /
* is reserved, we don't care. So the list we unescape is:
*
* ;:@$!*(),/
*
* However, IIS7 redirects fail when the url contains a colon (Bug 22709),
* so no fancy : for IIS7.
*
* %2F in the page titles seems to fatally break for some reason.
*
* @param string $s
* @return string
*/
function wfUrlencode( $s ) {
static $needle;
if ( is_null( $s ) ) {
$needle = null;
return '';
}
if ( is_null( $needle ) ) {
$needle = array( '%3B', '%40', '%24', '%21', '%2A', '%28', '%29', '%2C', '%2F' );
if ( !isset( $_SERVER['SERVER_SOFTWARE'] ) ||
( strpos( $_SERVER['SERVER_SOFTWARE'], 'Microsoft-IIS/7' ) === false )
) {
$needle[] = '%3A';
}
}
$s = urlencode( $s );
$s = str_ireplace(
$needle,
array( ';', '@', '$', '!', '*', '(', ')', ',', '/', ':' ),
$s
);
return $s;
}
/**
* This function takes two arrays as input, and returns a CGI-style string, e.g.
* "days=7&limit=100". Options in the first array override options in the second.
* Options set to null or false will not be output.
*
* @param array $array1 ( String|Array )
* @param array $array2 ( String|Array )
* @param string $prefix
* @return string
*/
function wfArrayToCgi( $array1, $array2 = null, $prefix = '' ) {
if ( !is_null( $array2 ) ) {
$array1 = $array1 + $array2;
}
$cgi = '';
foreach ( $array1 as $key => $value ) {
if ( !is_null( $value ) && $value !== false ) {
if ( $cgi != '' ) {
$cgi .= '&';
}
if ( $prefix !== '' ) {
$key = $prefix . "[$key]";
}
if ( is_array( $value ) ) {
$firstTime = true;
foreach ( $value as $k => $v ) {
$cgi .= $firstTime ? '' : '&';
if ( is_array( $v ) ) {
$cgi .= wfArrayToCgi( $v, null, $key . "[$k]" );
} else {
$cgi .= urlencode( $key . "[$k]" ) . '=' . urlencode( $v );
}
$firstTime = false;
}
} else {
if ( is_object( $value ) ) {
$value = $value->__toString();
}
$cgi .= urlencode( $key ) . '=' . urlencode( $value );
}
}
}
return $cgi;
}
/**
* This is the logical opposite of wfArrayToCgi(): it accepts a query string as
* its argument and returns the same string in array form. This allows compatibility
* with legacy functions that accept raw query strings instead of nice
* arrays. Of course, keys and values are urldecode()d.
*
* @param string $query Query string
* @return string[] Array version of input
*/
function wfCgiToArray( $query ) {
if ( isset( $query[0] ) && $query[0] == '?' ) {
$query = substr( $query, 1 );
}
$bits = explode( '&', $query );
$ret = array();
foreach ( $bits as $bit ) {
if ( $bit === '' ) {
continue;
}
if ( strpos( $bit, '=' ) === false ) {
// Pieces like &qwerty become 'qwerty' => '' (at least this is what php does)
$key = $bit;
$value = '';
} else {
list( $key, $value ) = explode( '=', $bit );
}
$key = urldecode( $key );
$value = urldecode( $value );
if ( strpos( $key, '[' ) !== false ) {
$keys = array_reverse( explode( '[', $key ) );
$key = array_pop( $keys );
$temp = $value;
foreach ( $keys as $k ) {
$k = substr( $k, 0, -1 );
$temp = array( $k => $temp );
}
if ( isset( $ret[$key] ) ) {
$ret[$key] = array_merge( $ret[$key], $temp );
} else {
$ret[$key] = $temp;
}
} else {
$ret[$key] = $value;
}
}
return $ret;
}
/**
* Append a query string to an existing URL, which may or may not already
* have query string parameters already. If so, they will be combined.
*
* @param string $url
* @param string|string[] $query String or associative array
* @return string
*/
function wfAppendQuery( $url, $query ) {
if ( is_array( $query ) ) {
$query = wfArrayToCgi( $query );
}
if ( $query != '' ) {
if ( false === strpos( $url, '?' ) ) {
$url .= '?';
} else {
$url .= '&';
}
$url .= $query;
}
return $url;
}
/**
* Expand a potentially local URL to a fully-qualified URL. Assumes $wgServer
* is correct.
*
* The meaning of the PROTO_* constants is as follows:
* PROTO_HTTP: Output a URL starting with http://
* PROTO_HTTPS: Output a URL starting with https://
* PROTO_RELATIVE: Output a URL starting with // (protocol-relative URL)
* PROTO_CURRENT: Output a URL starting with either http:// or https:// , depending
* on which protocol was used for the current incoming request
* PROTO_CANONICAL: For URLs without a domain, like /w/index.php , use $wgCanonicalServer.
* For protocol-relative URLs, use the protocol of $wgCanonicalServer
* PROTO_INTERNAL: Like PROTO_CANONICAL, but uses $wgInternalServer instead of $wgCanonicalServer
*
* @todo this won't work with current-path-relative URLs
* like "subdir/foo.html", etc.
*
* @param string $url Either fully-qualified or a local path + query
* @param string $defaultProto One of the PROTO_* constants. Determines the
* protocol to use if $url or $wgServer is protocol-relative
* @return string Fully-qualified URL, current-path-relative URL or false if
* no valid URL can be constructed
*/
function wfExpandUrl( $url, $defaultProto = PROTO_CURRENT ) {
global $wgServer, $wgCanonicalServer, $wgInternalServer, $wgRequest,
$wgHttpsPort;
if ( $defaultProto === PROTO_CANONICAL ) {
$serverUrl = $wgCanonicalServer;
} elseif ( $defaultProto === PROTO_INTERNAL && $wgInternalServer !== false ) {
// Make $wgInternalServer fall back to $wgServer if not set
$serverUrl = $wgInternalServer;
} else {
$serverUrl = $wgServer;
if ( $defaultProto === PROTO_CURRENT ) {
$defaultProto = $wgRequest->getProtocol() . '://';
}
}
// Analyze $serverUrl to obtain its protocol
$bits = wfParseUrl( $serverUrl );
$serverHasProto = $bits && $bits['scheme'] != '';
if ( $defaultProto === PROTO_CANONICAL || $defaultProto === PROTO_INTERNAL ) {
if ( $serverHasProto ) {
$defaultProto = $bits['scheme'] . '://';
} else {
// $wgCanonicalServer or $wgInternalServer doesn't have a protocol.
// This really isn't supposed to happen. Fall back to HTTP in this
// ridiculous case.
$defaultProto = PROTO_HTTP;
}
}
$defaultProtoWithoutSlashes = substr( $defaultProto, 0, -2 );
if ( substr( $url, 0, 2 ) == '//' ) {
$url = $defaultProtoWithoutSlashes . $url;
} elseif ( substr( $url, 0, 1 ) == '/' ) {
// If $serverUrl is protocol-relative, prepend $defaultProtoWithoutSlashes,
// otherwise leave it alone.
$url = ( $serverHasProto ? '' : $defaultProtoWithoutSlashes ) . $serverUrl . $url;
}
$bits = wfParseUrl( $url );
// ensure proper port for HTTPS arrives in URL
// https://bugzilla.wikimedia.org/show_bug.cgi?id=65184
if ( $defaultProto === PROTO_HTTPS && $wgHttpsPort != 443 ) {
$bits['port'] = $wgHttpsPort;
}
if ( $bits && isset( $bits['path'] ) ) {
$bits['path'] = wfRemoveDotSegments( $bits['path'] );
return wfAssembleUrl( $bits );
} elseif ( $bits ) {
# No path to expand
return $url;
} elseif ( substr( $url, 0, 1 ) != '/' ) {
# URL is a relative path
return wfRemoveDotSegments( $url );
}
# Expanded URL is not valid.
return false;
}
/**
* This function will reassemble a URL parsed with wfParseURL. This is useful
* if you need to edit part of a URL and put it back together.
*
* This is the basic structure used (brackets contain keys for $urlParts):
* [scheme][delimiter][user]:[pass]@[host]:[port][path]?[query]#[fragment]
*
* @todo Need to integrate this into wfExpandUrl (bug 32168)
*
* @since 1.19
* @param array $urlParts URL parts, as output from wfParseUrl
* @return string URL assembled from its component parts
*/
function wfAssembleUrl( $urlParts ) {
$result = '';
if ( isset( $urlParts['delimiter'] ) ) {
if ( isset( $urlParts['scheme'] ) ) {
$result .= $urlParts['scheme'];
}
$result .= $urlParts['delimiter'];
}
if ( isset( $urlParts['host'] ) ) {
if ( isset( $urlParts['user'] ) ) {
$result .= $urlParts['user'];
if ( isset( $urlParts['pass'] ) ) {
$result .= ':' . $urlParts['pass'];
}
$result .= '@';
}
$result .= $urlParts['host'];
if ( isset( $urlParts['port'] ) ) {
$result .= ':' . $urlParts['port'];
}
}
if ( isset( $urlParts['path'] ) ) {
$result .= $urlParts['path'];
}
if ( isset( $urlParts['query'] ) ) {
$result .= '?' . $urlParts['query'];
}
if ( isset( $urlParts['fragment'] ) ) {
$result .= '#' . $urlParts['fragment'];
}
return $result;
}
/**
* Remove all dot-segments in the provided URL path. For example,
* '/a/./b/../c/' becomes '/a/c/'. For details on the algorithm, please see
* RFC3986 section 5.2.4.
*
* @todo Need to integrate this into wfExpandUrl (bug 32168)
*
* @param string $urlPath URL path, potentially containing dot-segments
* @return string URL path with all dot-segments removed
*/
function wfRemoveDotSegments( $urlPath ) {
$output = '';
$inputOffset = 0;
$inputLength = strlen( $urlPath );
while ( $inputOffset < $inputLength ) {
$prefixLengthOne = substr( $urlPath, $inputOffset, 1 );
$prefixLengthTwo = substr( $urlPath, $inputOffset, 2 );
$prefixLengthThree = substr( $urlPath, $inputOffset, 3 );
$prefixLengthFour = substr( $urlPath, $inputOffset, 4 );
$trimOutput = false;
if ( $prefixLengthTwo == './' ) {
# Step A, remove leading "./"
$inputOffset += 2;
} elseif ( $prefixLengthThree == '../' ) {
# Step A, remove leading "../"
$inputOffset += 3;
} elseif ( ( $prefixLengthTwo == '/.' ) && ( $inputOffset + 2 == $inputLength ) ) {
# Step B, replace leading "/.$" with "/"
$inputOffset += 1;
$urlPath[$inputOffset] = '/';
} elseif ( $prefixLengthThree == '/./' ) {
# Step B, replace leading "/./" with "/"
$inputOffset += 2;
} elseif ( $prefixLengthThree == '/..' && ( $inputOffset + 3 == $inputLength ) ) {
# Step C, replace leading "/..$" with "/" and
# remove last path component in output
$inputOffset += 2;
$urlPath[$inputOffset] = '/';
$trimOutput = true;
} elseif ( $prefixLengthFour == '/../' ) {
# Step C, replace leading "/../" with "/" and
# remove last path component in output
$inputOffset += 3;
$trimOutput = true;
} elseif ( ( $prefixLengthOne == '.' ) && ( $inputOffset + 1 == $inputLength ) ) {
# Step D, remove "^.$"
$inputOffset += 1;
} elseif ( ( $prefixLengthTwo == '..' ) && ( $inputOffset + 2 == $inputLength ) ) {
# Step D, remove "^..$"
$inputOffset += 2;
} else {
# Step E, move leading path segment to output
if ( $prefixLengthOne == '/' ) {
$slashPos = strpos( $urlPath, '/', $inputOffset + 1 );
} else {
$slashPos = strpos( $urlPath, '/', $inputOffset );
}
if ( $slashPos === false ) {
$output .= substr( $urlPath, $inputOffset );
$inputOffset = $inputLength;
} else {
$output .= substr( $urlPath, $inputOffset, $slashPos - $inputOffset );
$inputOffset += $slashPos - $inputOffset;
}
}
if ( $trimOutput ) {
$slashPos = strrpos( $output, '/' );
if ( $slashPos === false ) {
$output = '';
} else {
$output = substr( $output, 0, $slashPos );
}
}
}
return $output;
}
/**
* Returns a regular expression of url protocols
*
* @param bool $includeProtocolRelative If false, remove '//' from the returned protocol list.
* DO NOT USE this directly, use wfUrlProtocolsWithoutProtRel() instead
* @return string
*/
function wfUrlProtocols( $includeProtocolRelative = true ) {
global $wgUrlProtocols;
// Cache return values separately based on $includeProtocolRelative
static $withProtRel = null, $withoutProtRel = null;
$cachedValue = $includeProtocolRelative ? $withProtRel : $withoutProtRel;
if ( !is_null( $cachedValue ) ) {
return $cachedValue;
}
// Support old-style $wgUrlProtocols strings, for backwards compatibility
// with LocalSettings files from 1.5
if ( is_array( $wgUrlProtocols ) ) {
$protocols = array();
foreach ( $wgUrlProtocols as $protocol ) {
// Filter out '//' if !$includeProtocolRelative
if ( $includeProtocolRelative || $protocol !== '//' ) {
$protocols[] = preg_quote( $protocol, '/' );
}
}
$retval = implode( '|', $protocols );
} else {
// Ignore $includeProtocolRelative in this case
// This case exists for pre-1.6 compatibility, and we can safely assume
// that '//' won't appear in a pre-1.6 config because protocol-relative
// URLs weren't supported until 1.18
$retval = $wgUrlProtocols;
}
// Cache return value
if ( $includeProtocolRelative ) {
$withProtRel = $retval;
} else {
$withoutProtRel = $retval;
}
return $retval;
}
/**
* Like wfUrlProtocols(), but excludes '//' from the protocol list. Use this if
* you need a regex that matches all URL protocols but does not match protocol-
* relative URLs
* @return string
*/
function wfUrlProtocolsWithoutProtRel() {
return wfUrlProtocols( false );
}
/**
* parse_url() work-alike, but non-broken. Differences:
*
* 1) Does not raise warnings on bad URLs (just returns false).
* 2) Handles protocols that don't use :// (e.g., mailto: and news:, as well as
* protocol-relative URLs) correctly.
* 3) Adds a "delimiter" element to the array, either '://', ':' or '//' (see (2)).
*
* @param string $url A URL to parse
* @return string[] Bits of the URL in an associative array, per PHP docs
*/
function wfParseUrl( $url ) {
global $wgUrlProtocols; // Allow all protocols defined in DefaultSettings/LocalSettings.php
// Protocol-relative URLs are handled really badly by parse_url(). It's so
// bad that the easiest way to handle them is to just prepend 'http:' and
// strip the protocol out later.
$wasRelative = substr( $url, 0, 2 ) == '//';
if ( $wasRelative ) {
$url = "http:$url";
}
wfSuppressWarnings();
$bits = parse_url( $url );
wfRestoreWarnings();
// parse_url() returns an array without scheme for some invalid URLs, e.g.
// parse_url("%0Ahttp://example.com") == array( 'host' => '%0Ahttp', 'path' => 'example.com' )
if ( !$bits || !isset( $bits['scheme'] ) ) {
return false;
}
// parse_url() incorrectly handles schemes case-sensitively. Convert it to lowercase.
$bits['scheme'] = strtolower( $bits['scheme'] );
// most of the protocols are followed by ://, but mailto: and sometimes news: not, check for it
if ( in_array( $bits['scheme'] . '://', $wgUrlProtocols ) ) {
$bits['delimiter'] = '://';
} elseif ( in_array( $bits['scheme'] . ':', $wgUrlProtocols ) ) {
$bits['delimiter'] = ':';
// parse_url detects for news: and mailto: the host part of an url as path
// We have to correct this wrong detection
if ( isset( $bits['path'] ) ) {
$bits['host'] = $bits['path'];
$bits['path'] = '';
}
} else {
return false;
}
/* Provide an empty host for eg. file:/// urls (see bug 28627) */
if ( !isset( $bits['host'] ) ) {
$bits['host'] = '';
// bug 45069
if ( isset( $bits['path'] ) ) {
/* parse_url loses the third / for file:///c:/ urls (but not on variants) */
if ( substr( $bits['path'], 0, 1 ) !== '/' ) {
$bits['path'] = '/' . $bits['path'];
}
} else {
$bits['path'] = '';
}
}
// If the URL was protocol-relative, fix scheme and delimiter
if ( $wasRelative ) {
$bits['scheme'] = '';
$bits['delimiter'] = '//';
}
return $bits;
}
/**
* Take a URL, make sure it's expanded to fully qualified, and replace any
* encoded non-ASCII Unicode characters with their UTF-8 original forms
* for more compact display and legibility for local audiences.
*
* @todo handle punycode domains too
*
* @param string $url
* @return string
*/
function wfExpandIRI( $url ) {
return preg_replace_callback(
'/((?:%[89A-F][0-9A-F])+)/i',
'wfExpandIRI_callback',
wfExpandUrl( $url )
);
}
/**
* Private callback for wfExpandIRI
* @param array $matches
* @return string
*/
function wfExpandIRI_callback( $matches ) {
return urldecode( $matches[1] );
}
/**
* Make URL indexes, appropriate for the el_index field of externallinks.
*
* @param string $url
* @return array
*/
function wfMakeUrlIndexes( $url ) {
$bits = wfParseUrl( $url );
// Reverse the labels in the hostname, convert to lower case
// For emails reverse domainpart only
if ( $bits['scheme'] == 'mailto' ) {
$mailparts = explode( '@', $bits['host'], 2 );
if ( count( $mailparts ) === 2 ) {
$domainpart = strtolower( implode( '.', array_reverse( explode( '.', $mailparts[1] ) ) ) );
} else {
// No domain specified, don't mangle it
$domainpart = '';
}
$reversedHost = $domainpart . '@' . $mailparts[0];
} else {
$reversedHost = strtolower( implode( '.', array_reverse( explode( '.', $bits['host'] ) ) ) );
}
// Add an extra dot to the end
// Why? Is it in wrong place in mailto links?
if ( substr( $reversedHost, -1, 1 ) !== '.' ) {
$reversedHost .= '.';
}
// Reconstruct the pseudo-URL
$prot = $bits['scheme'];
$index = $prot . $bits['delimiter'] . $reversedHost;
// Leave out user and password. Add the port, path, query and fragment
if ( isset( $bits['port'] ) ) {
$index .= ':' . $bits['port'];
}
if ( isset( $bits['path'] ) ) {
$index .= $bits['path'];
} else {
$index .= '/';
}
if ( isset( $bits['query'] ) ) {
$index .= '?' . $bits['query'];
}
if ( isset( $bits['fragment'] ) ) {
$index .= '#' . $bits['fragment'];
}
if ( $prot == '' ) {
return array( "http:$index", "https:$index" );
} else {
return array( $index );
}
}
/**
* Check whether a given URL has a domain that occurs in a given set of domains
* @param string $url URL
* @param array $domains Array of domains (strings)
* @return bool True if the host part of $url ends in one of the strings in $domains
*/
function wfMatchesDomainList( $url, $domains ) {
$bits = wfParseUrl( $url );
if ( is_array( $bits ) && isset( $bits['host'] ) ) {
$host = '.' . $bits['host'];
foreach ( (array)$domains as $domain ) {
$domain = '.' . $domain;
if ( substr( $host, -strlen( $domain ) ) === $domain ) {
return true;
}
}
}
return false;
}
/**
* Sends a line to the debug log if enabled or, optionally, to a comment in output.
* In normal operation this is a NOP.
*
* Controlling globals:
* $wgDebugLogFile - points to the log file
* $wgDebugRawPage - if false, 'action=raw' hits will not result in debug output.
* $wgDebugComments - if on, some debug items may appear in comments in the HTML output.
*
* @since 1.25 support for additional context data
*
* @param string $text
* @param string|bool $dest Unused
* @param array $context Additional logging context data
*/
function wfDebug( $text, $dest = 'all', array $context = array() ) {
global $wgDebugRawPage, $wgDebugLogPrefix;
global $wgDebugTimestamps, $wgRequestTime;
if ( !$wgDebugRawPage && wfIsDebugRawPage() ) {
return;
}
$text = trim( $text );
// Inline logic from deprecated wfDebugTimer()
if ( $wgDebugTimestamps ) {
$context['seconds_elapsed'] = sprintf(
'%6.4f',
microtime( true ) - $wgRequestTime
);
$context['memory_used'] = sprintf(
'%5.1fM',
( memory_get_usage( true ) / ( 1024 * 1024 ) )
);
}
if ( $wgDebugLogPrefix !== '' ) {
$context['prefix'] = $wgDebugLogPrefix;
}
$logger = LoggerFactory::getInstance( 'wfDebug' );
$logger->debug( $text, $context );
}
/**
* Returns true if debug logging should be suppressed if $wgDebugRawPage = false
* @return bool
*/
function wfIsDebugRawPage() {
static $cache;
if ( $cache !== null ) {
return $cache;
}
# Check for raw action using $_GET not $wgRequest, since the latter might not be initialised yet
if ( ( isset( $_GET['action'] ) && $_GET['action'] == 'raw' )
|| (
isset( $_SERVER['SCRIPT_NAME'] )
&& substr( $_SERVER['SCRIPT_NAME'], -8 ) == 'load.php'
)
) {
$cache = true;
} else {
$cache = false;
}
return $cache;
}
/**
* Get microsecond timestamps for debug logs
*
* @deprecated since 1.25
* @return string
*/
function wfDebugTimer() {
global $wgDebugTimestamps, $wgRequestTime;
wfDeprecated( __METHOD__, '1.25' );
if ( !$wgDebugTimestamps ) {
return '';
}
$prefix = sprintf( "%6.4f", microtime( true ) - $wgRequestTime );
$mem = sprintf( "%5.1fM", ( memory_get_usage( true ) / ( 1024 * 1024 ) ) );
return "$prefix $mem ";
}
/**
* Send a line giving PHP memory usage.
*
* @param bool $exact Print exact byte values instead of kibibytes (default: false)
*/
function wfDebugMem( $exact = false ) {
$mem = memory_get_usage();
if ( !$exact ) {
$mem = floor( $mem / 1024 ) . ' KiB';
} else {
$mem .= ' B';
}
wfDebug( "Memory usage: $mem\n" );
}
/**
* Send a line to a supplementary debug log file, if configured, or main debug
* log if not.
*
* To configure a supplementary log file, set $wgDebugLogGroups[$logGroup] to
* a string filename or an associative array mapping 'destination' to the
* desired filename. The associative array may also contain a 'sample' key
* with an integer value, specifying a sampling factor. Sampled log events
* will be emitted with a 1 in N random chance.
*
* @since 1.23 support for sampling log messages via $wgDebugLogGroups.
* @since 1.25 support for additional context data
* @since 1.25 sample behavior dependent on configured $wgMWLoggerDefaultSpi
*
* @param string $logGroup
* @param string $text
* @param string|bool $dest Destination of the message:
* - 'all': both to the log and HTML (debug toolbar or HTML comments)
* - 'log': only to the log and not in HTML
* - 'private': only to the specific log if set in $wgDebugLogGroups and
* discarded otherwise
* For backward compatibility, it can also take a boolean:
* - true: same as 'all'
* - false: same as 'private'
* @param array $context Additional logging context data
*/
function wfDebugLog(
$logGroup, $text, $dest = 'all', array $context = array()
) {
// Turn $dest into a string if it's a boolean (for b/c)
if ( $dest === true ) {
$dest = 'all';
} elseif ( $dest === false ) {
$dest = 'private';
}
$text = trim( $text );
$logger = LoggerFactory::getInstance( $logGroup );
$context['private'] = ( $dest === 'private' );
$logger->info( $text, $context );
}
/**
* Log for database errors
*
* @since 1.25 support for additional context data
*
* @param string $text Database error message.
* @param array $context Additional logging context data
*/
function wfLogDBError( $text, array $context = array() ) {
$logger = LoggerFactory::getInstance( 'wfLogDBError' );
$logger->error( trim( $text ), $context );
}
/**
* Throws a warning that $function is deprecated
*
* @param string $function
* @param string|bool $version Version of MediaWiki that the function
* was deprecated in (Added in 1.19).
* @param string|bool $component Added in 1.19.
* @param int $callerOffset How far up the call stack is the original
* caller. 2 = function that called the function that called
* wfDeprecated (Added in 1.20)
*
* @return null
*/
function wfDeprecated( $function, $version = false, $component = false, $callerOffset = 2 ) {
MWDebug::deprecated( $function, $version, $component, $callerOffset + 1 );
}
/**
* Send a warning either to the debug log or in a PHP error depending on
* $wgDevelopmentWarnings. To log warnings in production, use wfLogWarning() instead.
*
* @param string $msg Message to send
* @param int $callerOffset Number of items to go back in the backtrace to
* find the correct caller (1 = function calling wfWarn, ...)
* @param int $level PHP error level; defaults to E_USER_NOTICE;
* only used when $wgDevelopmentWarnings is true
*/
function wfWarn( $msg, $callerOffset = 1, $level = E_USER_NOTICE ) {
MWDebug::warning( $msg, $callerOffset + 1, $level, 'auto' );
}
/**
* Send a warning as a PHP error and the debug log. This is intended for logging
* warnings in production. For logging development warnings, use WfWarn instead.
*
* @param string $msg Message to send
* @param int $callerOffset Number of items to go back in the backtrace to
* find the correct caller (1 = function calling wfLogWarning, ...)
* @param int $level PHP error level; defaults to E_USER_WARNING
*/
function wfLogWarning( $msg, $callerOffset = 1, $level = E_USER_WARNING ) {
MWDebug::warning( $msg, $callerOffset + 1, $level, 'production' );
}
/**
* Log to a file without getting "file size exceeded" signals.
*
* Can also log to TCP or UDP with the syntax udp://host:port/prefix. This will
* send lines to the specified port, prefixed by the specified prefix and a space.
* @since 1.25 support for additional context data
*
* @param string $text
* @param string $file Filename
* @param array $context Additional logging context data
* @throws MWException
* @deprecated since 1.25 Use MediaWiki\Logger\LegacyLogger::emit or UDPTransport
*/
function wfErrorLog( $text, $file, array $context = array() ) {
wfDeprecated( __METHOD__, '1.25' );
$logger = LoggerFactory::getInstance( 'wfErrorLog' );
$context['destination'] = $file;
$logger->info( trim( $text ), $context );
}
/**
* @todo document
*/
function wfLogProfilingData() {
global $wgDebugLogGroups, $wgDebugRawPage;
$context = RequestContext::getMain();
$request = $context->getRequest();
$profiler = Profiler::instance();
$profiler->setContext( $context );
$profiler->logData();
$config = $context->getConfig();
if ( $config->has( 'StatsdServer' ) ) {
$statsdServer = explode( ':', $config->get( 'StatsdServer' ) );
$statsdHost = $statsdServer[0];
$statsdPort = isset( $statsdServer[1] ) ? $statsdServer[1] : 8125;
$statsdSender = new SocketSender( $statsdHost, $statsdPort );
$statsdClient = new StatsdClient( $statsdSender );
$statsdClient->send( $context->getStats()->getBuffer() );
}
# Profiling must actually be enabled...
if ( $profiler instanceof ProfilerStub ) {
return;
}
if ( isset( $wgDebugLogGroups['profileoutput'] )
&& $wgDebugLogGroups['profileoutput'] === false
) {
// Explicitly disabled
return;
}
if ( !$wgDebugRawPage && wfIsDebugRawPage() ) {
return;
}
$ctx = array( 'elapsed' => $request->getElapsedTime() );
if ( !empty( $_SERVER['HTTP_X_FORWARDED_FOR'] ) ) {
$ctx['forwarded_for'] = $_SERVER['HTTP_X_FORWARDED_FOR'];
}
if ( !empty( $_SERVER['HTTP_CLIENT_IP'] ) ) {
$ctx['client_ip'] = $_SERVER['HTTP_CLIENT_IP'];
}
if ( !empty( $_SERVER['HTTP_FROM'] ) ) {
$ctx['from'] = $_SERVER['HTTP_FROM'];
}
if ( isset( $ctx['forwarded_for'] ) ||
isset( $ctx['client_ip'] ) ||
isset( $ctx['from'] ) ) {
$ctx['proxy'] = $_SERVER['REMOTE_ADDR'];
}
// Don't load $wgUser at this late stage just for statistics purposes
// @todo FIXME: We can detect some anons even if it is not loaded.
// See User::getId()
$user = $context->getUser();
$ctx['anon'] = $user->isItemLoaded( 'id' ) && $user->isAnon();
// Command line script uses a FauxRequest object which does not have
// any knowledge about an URL and throw an exception instead.
try {
$ctx['url'] = urldecode( $request->getRequestURL() );
} catch ( Exception $ignored ) {
// no-op
}
$ctx['output'] = $profiler->getOutput();
$log = LoggerFactory::getInstance( 'profileoutput' );
$log->info( "Elapsed: {elapsed}; URL: <{url}>\n{output}", $ctx );
}
/**
* Increment a statistics counter
*
* @param string $key
* @param int $count
* @return void
*/
function wfIncrStats( $key, $count = 1 ) {
$stats = RequestContext::getMain()->getStats();
$stats->updateCount( $key, $count );
}
/**
* Check whether the wiki is in read-only mode.
*
* @return bool
*/
function wfReadOnly() {
return wfReadOnlyReason() !== false;
}
/**
* Get the value of $wgReadOnly or the contents of $wgReadOnlyFile.
*
* @return string|bool String when in read-only mode; false otherwise
*/
function wfReadOnlyReason() {
global $wgReadOnly, $wgReadOnlyFile;
if ( $wgReadOnly === null ) {
// Set $wgReadOnly for faster access next time
if ( is_file( $wgReadOnlyFile ) && filesize( $wgReadOnlyFile ) > 0 ) {
$wgReadOnly = file_get_contents( $wgReadOnlyFile );
} else {
$wgReadOnly = false;
}
}
return $wgReadOnly;
}
/**
* Return a Language object from $langcode
*
* @param Language|string|bool $langcode Either:
* - a Language object
* - code of the language to get the message for, if it is
* a valid code create a language for that language, if
* it is a string but not a valid code then make a basic
* language object
* - a boolean: if it's false then use the global object for
* the current user's language (as a fallback for the old parameter
* functionality), or if it is true then use global object
* for the wiki's content language.
* @return Language
*/
function wfGetLangObj( $langcode = false ) {
# Identify which language to get or create a language object for.
# Using is_object here due to Stub objects.
if ( is_object( $langcode ) ) {
# Great, we already have the object (hopefully)!
return $langcode;
}
global $wgContLang, $wgLanguageCode;
if ( $langcode === true || $langcode === $wgLanguageCode ) {
# $langcode is the language code of the wikis content language object.
# or it is a boolean and value is true
return $wgContLang;
}
global $wgLang;
if ( $langcode === false || $langcode === $wgLang->getCode() ) {
# $langcode is the language code of user language object.
# or it was a boolean and value is false
return $wgLang;
}
$validCodes = array_keys( Language::fetchLanguageNames() );
if ( in_array( $langcode, $validCodes ) ) {
# $langcode corresponds to a valid language.
return Language::factory( $langcode );
}
# $langcode is a string, but not a valid language code; use content language.
wfDebug( "Invalid language code passed to wfGetLangObj, falling back to content language.\n" );
return $wgContLang;
}
/**
* This is the function for getting translated interface messages.
*
* @see Message class for documentation how to use them.
* @see https://www.mediawiki.org/wiki/Manual:Messages_API
*
* This function replaces all old wfMsg* functions.
*
* @param string|string[] $key Message key, or array of keys
* @param mixed $params,... Normal message parameters
* @return Message
*
* @since 1.17
*
* @see Message::__construct
*/
function wfMessage( $key /*...*/ ) {
$params = func_get_args();
array_shift( $params );
if ( isset( $params[0] ) && is_array( $params[0] ) ) {
$params = $params[0];
}
return new Message( $key, $params );
}
/**
* This function accepts multiple message keys and returns a message instance
* for the first message which is non-empty. If all messages are empty then an
* instance of the first message key is returned.
*
* @param string|string[] $keys,... Message keys
* @return Message
*
* @since 1.18
*
* @see Message::newFallbackSequence
*/
function wfMessageFallback( /*...*/ ) {
$args = func_get_args();
return call_user_func_array( 'Message::newFallbackSequence', $args );
}
/**
* Get a message from anywhere, for the current user language.
*
* Use wfMsgForContent() instead if the message should NOT
* change depending on the user preferences.
*
* @deprecated since 1.18
*
* @param string $key Lookup key for the message, usually
* defined in languages/Language.php
*
* Parameters to the message, which can be used to insert variable text into
* it, can be passed to this function in the following formats:
* - One per argument, starting at the second parameter
* - As an array in the second parameter
* These are not shown in the function definition.
*
* @return string
*/
function wfMsg( $key ) {
wfDeprecated( __METHOD__, '1.21' );
$args = func_get_args();
array_shift( $args );
return wfMsgReal( $key, $args );
}
/**
* Same as above except doesn't transform the message
*
* @deprecated since 1.18
*
* @param string $key
* @return string
*/
function wfMsgNoTrans( $key ) {
wfDeprecated( __METHOD__, '1.21' );
$args = func_get_args();
array_shift( $args );
return wfMsgReal( $key, $args, true, false, false );
}
/**
* Get a message from anywhere, for the current global language
* set with $wgLanguageCode.
*
* Use this if the message should NOT change dependent on the
* language set in the user's preferences. This is the case for
* most text written into logs, as well as link targets (such as
* the name of the copyright policy page). Link titles, on the
* other hand, should be shown in the UI language.
*
* Note that MediaWiki allows users to change the user interface
* language in their preferences, but a single installation
* typically only contains content in one language.
*
* Be wary of this distinction: If you use wfMsg() where you should
* use wfMsgForContent(), a user of the software may have to
* customize potentially hundreds of messages in
* order to, e.g., fix a link in every possible language.
*
* @deprecated since 1.18
*
* @param string $key Lookup key for the message, usually
* defined in languages/Language.php
* @return string
*/
function wfMsgForContent( $key ) {
wfDeprecated( __METHOD__, '1.21' );
global $wgForceUIMsgAsContentMsg;
$args = func_get_args();
array_shift( $args );
$forcontent = true;
if ( is_array( $wgForceUIMsgAsContentMsg )
&& in_array( $key, $wgForceUIMsgAsContentMsg )
) {
$forcontent = false;
}
return wfMsgReal( $key, $args, true, $forcontent );
}
/**
* Same as above except doesn't transform the message
*
* @deprecated since 1.18
*
* @param string $key
* @return string
*/
function wfMsgForContentNoTrans( $key ) {
wfDeprecated( __METHOD__, '1.21' );
global $wgForceUIMsgAsContentMsg;
$args = func_get_args();
array_shift( $args );
$forcontent = true;
if ( is_array( $wgForceUIMsgAsContentMsg )
&& in_array( $key, $wgForceUIMsgAsContentMsg )
) {
$forcontent = false;
}
return wfMsgReal( $key, $args, true, $forcontent, false );
}
/**
* Really get a message
*
* @deprecated since 1.18
*
* @param string $key Key to get.
* @param array $args
* @param bool $useDB
* @param string|bool $forContent Language code, or false for user lang, true for content lang.
* @param bool $transform Whether or not to transform the message.
* @return string The requested message.
*/
function wfMsgReal( $key, $args, $useDB = true, $forContent = false, $transform = true ) {
wfDeprecated( __METHOD__, '1.21' );
$message = wfMsgGetKey( $key, $useDB, $forContent, $transform );
$message = wfMsgReplaceArgs( $message, $args );
return $message;
}
/**
* Fetch a message string value, but don't replace any keys yet.
*
* @deprecated since 1.18
*
* @param string $key
* @param bool $useDB
* @param string|bool $langCode Code of the language to get the message for, or
* behaves as a content language switch if it is a boolean.
* @param bool $transform Whether to parse magic words, etc.
* @return string
*/
function wfMsgGetKey( $key, $useDB = true, $langCode = false, $transform = true ) {
wfDeprecated( __METHOD__, '1.21' );
Hooks::run( 'NormalizeMessageKey', array( &$key, &$useDB, &$langCode, &$transform ) );
$cache = MessageCache::singleton();
$message = $cache->get( $key, $useDB, $langCode );
if ( $message === false ) {
$message = '<' . htmlspecialchars( $key ) . '>';
} elseif ( $transform ) {
$message = $cache->transform( $message );
}
return $message;
}
/**
* Replace message parameter keys on the given formatted output.
*
* @param string $message
* @param array $args
* @return string
* @private
*/
function wfMsgReplaceArgs( $message, $args ) {
# Fix windows line-endings
# Some messages are split with explode("\n", $msg)
$message = str_replace( "\r", '', $message );
// Replace arguments
if ( count( $args ) ) {
if ( is_array( $args[0] ) ) {
$args = array_values( $args[0] );
}
$replacementKeys = array();
foreach ( $args as $n => $param ) {
$replacementKeys['$' . ( $n + 1 )] = $param;
}
$message = strtr( $message, $replacementKeys );
}
return $message;
}
/**
* Return an HTML-escaped version of a message.
* Parameter replacements, if any, are done *after* the HTML-escaping,
* so parameters may contain HTML (eg links or form controls). Be sure
* to pre-escape them if you really do want plaintext, or just wrap
* the whole thing in htmlspecialchars().
*
* @deprecated since 1.18
*
* @param string $key
* @param string $args,... Parameters
* @return string
*/
function wfMsgHtml( $key ) {
wfDeprecated( __METHOD__, '1.21' );
$args = func_get_args();
array_shift( $args );
return wfMsgReplaceArgs( htmlspecialchars( wfMsgGetKey( $key ) ), $args );
}
/**
* Return an HTML version of message
* Parameter replacements, if any, are done *after* parsing the wiki-text message,
* so parameters may contain HTML (eg links or form controls). Be sure
* to pre-escape them if you really do want plaintext, or just wrap
* the whole thing in htmlspecialchars().
*
* @deprecated since 1.18
*
* @param string $key
* @param string $args,... Parameters
* @return string
*/
function wfMsgWikiHtml( $key ) {
wfDeprecated( __METHOD__, '1.21' );
$args = func_get_args();
array_shift( $args );
return wfMsgReplaceArgs(
MessageCache::singleton()->parse( wfMsgGetKey( $key ), null,
/* can't be set to false */ true, /* interface */ true )->getText(),
$args );
}
/**
* Returns message in the requested format
*
* @deprecated since 1.18
*
* @param string $key Key of the message
* @param array $options Processing rules.
* Can take the following options:
* parse: parses wikitext to HTML
* parseinline: parses wikitext to HTML and removes the surrounding
* p's added by parser or tidy
* escape: filters message through htmlspecialchars
* escapenoentities: same, but allows entity references like through
* replaceafter: parameters are substituted after parsing or escaping
* parsemag: transform the message using magic phrases
* content: fetch message for content language instead of interface
* Also can accept a single associative argument, of the form 'language' => 'xx':
* language: Language object or language code to fetch message for
* (overridden by content).
* Behavior for conflicting options (e.g., parse+parseinline) is undefined.
*
* @return string
*/
function wfMsgExt( $key, $options ) {
wfDeprecated( __METHOD__, '1.21' );
$args = func_get_args();
array_shift( $args );
array_shift( $args );
$options = (array)$options;
$validOptions = array( 'parse', 'parseinline', 'escape', 'escapenoentities', 'replaceafter',
'parsemag', 'content' );
foreach ( $options as $arrayKey => $option ) {
if ( !preg_match( '/^[0-9]+|language$/', $arrayKey ) ) {
// An unknown index, neither numeric nor "language"
wfWarn( "wfMsgExt called with incorrect parameter key $arrayKey", 1, E_USER_WARNING );
} elseif ( preg_match( '/^[0-9]+$/', $arrayKey ) && !in_array( $option, $validOptions ) ) {
// A numeric index with unknown value
wfWarn( "wfMsgExt called with incorrect parameter $option", 1, E_USER_WARNING );
}
}
if ( in_array( 'content', $options, true ) ) {
$forContent = true;
$langCode = true;
$langCodeObj = null;
} elseif ( array_key_exists( 'language', $options ) ) {
$forContent = false;
$langCode = wfGetLangObj( $options['language'] );
$langCodeObj = $langCode;
} else {
$forContent = false;
$langCode = false;
$langCodeObj = null;
}
$string = wfMsgGetKey( $key, /*DB*/true, $langCode, /*Transform*/false );
if ( !in_array( 'replaceafter', $options, true ) ) {
$string = wfMsgReplaceArgs( $string, $args );
}
$messageCache = MessageCache::singleton();
$parseInline = in_array( 'parseinline', $options, true );
if ( in_array( 'parse', $options, true ) || $parseInline ) {
$string = $messageCache->parse( $string, null, true, !$forContent, $langCodeObj );
if ( $string instanceof ParserOutput ) {
$string = $string->getText();
}
if ( $parseInline ) {
$string = Parser::stripOuterParagraph( $string );
}
} elseif ( in_array( 'parsemag', $options, true ) ) {
$string = $messageCache->transform( $string,
!$forContent, $langCodeObj );
}
if ( in_array( 'escape', $options, true ) ) {
$string = htmlspecialchars ( $string );
} elseif ( in_array( 'escapenoentities', $options, true ) ) {
$string = Sanitizer::escapeHtmlAllowEntities( $string );
}
if ( in_array( 'replaceafter', $options, true ) ) {
$string = wfMsgReplaceArgs( $string, $args );
}
return $string;
}
/**
* Since wfMsg() and co suck, they don't return false if the message key they
* looked up didn't exist but instead the key wrapped in <>'s, this function checks for the
* nonexistence of messages by checking the MessageCache::get() result directly.
*
* @deprecated since 1.18. Use Message::isDisabled().
*
* @param string $key The message key looked up
* @return bool True if the message *doesn't* exist.
*/
function wfEmptyMsg( $key ) {
wfDeprecated( __METHOD__, '1.21' );
return MessageCache::singleton()->get( $key, /*useDB*/true, /*content*/false ) === false;
}
/**
* Fetch server name for use in error reporting etc.
* Use real server name if available, so we know which machine
* in a server farm generated the current page.
*
* @return string
*/
function wfHostname() {
static $host;
if ( is_null( $host ) ) {
# Hostname overriding
global $wgOverrideHostname;
if ( $wgOverrideHostname !== false ) {
# Set static and skip any detection
$host = $wgOverrideHostname;
return $host;
}
if ( function_exists( 'posix_uname' ) ) {
// This function not present on Windows
$uname = posix_uname();
} else {
$uname = false;
}
if ( is_array( $uname ) && isset( $uname['nodename'] ) ) {
$host = $uname['nodename'];
} elseif ( getenv( 'COMPUTERNAME' ) ) {
# Windows computer name
$host = getenv( 'COMPUTERNAME' );
} else {
# This may be a virtual server.
$host = $_SERVER['SERVER_NAME'];
}
}
return $host;
}
/**
* Returns a script tag that stores the amount of time it took MediaWiki to
* handle the request in milliseconds as 'wgBackendResponseTime'.
*
* If $wgShowHostnames is true, the script will also set 'wgHostname' to the
* hostname of the server handling the request.
*
* @return string
*/
function wfReportTime() {
global $wgRequestTime, $wgShowHostnames;
$responseTime = round( ( microtime( true ) - $wgRequestTime ) * 1000 );
$reportVars = array( 'wgBackendResponseTime' => $responseTime );
if ( $wgShowHostnames ) {
$reportVars['wgHostname'] = wfHostname();
}
return Skin::makeVariablesScript( $reportVars );
}
/**
* Safety wrapper for debug_backtrace().
*
* Will return an empty array if debug_backtrace is disabled, otherwise
* the output from debug_backtrace() (trimmed).
*
* @param int $limit This parameter can be used to limit the number of stack frames returned
*
* @return array Array of backtrace information
*/
function wfDebugBacktrace( $limit = 0 ) {
static $disabled = null;
if ( is_null( $disabled ) ) {
$disabled = !function_exists( 'debug_backtrace' );
if ( $disabled ) {
wfDebug( "debug_backtrace() is disabled\n" );
}
}
if ( $disabled ) {
return array();
}
if ( $limit && version_compare( PHP_VERSION, '5.4.0', '>=' ) ) {
return array_slice( debug_backtrace( DEBUG_BACKTRACE_PROVIDE_OBJECT, $limit + 1 ), 1 );
} else {
return array_slice( debug_backtrace(), 1 );
}
}
/**
* Get a debug backtrace as a string
*
* @param bool|null $raw If true, the return value is plain text. If false, HTML.
* Defaults to $wgCommandLineMode if unset.
* @return string
* @since 1.25 Supports $raw parameter.
*/
function wfBacktrace( $raw = null ) {
global $wgCommandLineMode;
if ( $raw === null ) {
$raw = $wgCommandLineMode;
}
if ( $raw ) {
$frameFormat = "%s line %s calls %s()\n";
$traceFormat = "%s";
} else {
$frameFormat = "%s line %s calls %s()\n";
$traceFormat = "\n";
}
$frames = array_map( function ( $frame ) use ( $frameFormat ) {
$file = !empty( $frame['file'] ) ? basename( $frame['file'] ) : '-';
$line = isset( $frame['line'] ) ? $frame['line'] : '-';
$call = $frame['function'];
if ( !empty( $frame['class'] ) ) {
$call = $frame['class'] . $frame['type'] . $call;
}
return sprintf( $frameFormat, $file, $line, $call );
}, wfDebugBacktrace() );
return sprintf( $traceFormat, implode( '', $frames ) );
}
/**
* Get the name of the function which called this function
* wfGetCaller( 1 ) is the function with the wfGetCaller() call (ie. __FUNCTION__)
* wfGetCaller( 2 ) [default] is the caller of the function running wfGetCaller()
* wfGetCaller( 3 ) is the parent of that.
*
* @param int $level
* @return string
*/
function wfGetCaller( $level = 2 ) {
$backtrace = wfDebugBacktrace( $level + 1 );
if ( isset( $backtrace[$level] ) ) {
return wfFormatStackFrame( $backtrace[$level] );
} else {
return 'unknown';
}
}
/**
* Return a string consisting of callers in the stack. Useful sometimes
* for profiling specific points.
*
* @param int $limit The maximum depth of the stack frame to return, or false for the entire stack.
* @return string
*/
function wfGetAllCallers( $limit = 3 ) {
$trace = array_reverse( wfDebugBacktrace() );
if ( !$limit || $limit > count( $trace ) - 1 ) {
$limit = count( $trace ) - 1;
}
$trace = array_slice( $trace, -$limit - 1, $limit );
return implode( '/', array_map( 'wfFormatStackFrame', $trace ) );
}
/**
* Return a string representation of frame
*
* @param array $frame
* @return string
*/
function wfFormatStackFrame( $frame ) {
return isset( $frame['class'] ) ?
$frame['class'] . '::' . $frame['function'] :
$frame['function'];
}
/* Some generic result counters, pulled out of SearchEngine */
/**
* @todo document
*
* @param int $offset
* @param int $limit
* @return string
*/
function wfShowingResults( $offset, $limit ) {
return wfMessage( 'showingresults' )->numParams( $limit, $offset + 1 )->parse();
}
/**
* @todo document
* @todo FIXME: We may want to blacklist some broken browsers
*
* @param bool $force
* @return bool Whereas client accept gzip compression
*/
function wfClientAcceptsGzip( $force = false ) {
static $result = null;
if ( $result === null || $force ) {
$result = false;
if ( isset( $_SERVER['HTTP_ACCEPT_ENCODING'] ) ) {
# @todo FIXME: We may want to blacklist some broken browsers
$m = array();
if ( preg_match(
'/\bgzip(?:;(q)=([0-9]+(?:\.[0-9]+)))?\b/',
$_SERVER['HTTP_ACCEPT_ENCODING'],
$m
)
) {
if ( isset( $m[2] ) && ( $m[1] == 'q' ) && ( $m[2] == 0 ) ) {
$result = false;
return $result;
}
wfDebug( "wfClientAcceptsGzip: client accepts gzip.\n" );
$result = true;
}
}
}
return $result;
}
/**
* Obtain the offset and limit values from the request string;
* used in special pages
*
* @param int $deflimit Default limit if none supplied
* @param string $optionname Name of a user preference to check against
* @return array
* @deprecated since 1.24, just call WebRequest::getLimitOffset() directly
*/
function wfCheckLimits( $deflimit = 50, $optionname = 'rclimit' ) {
global $wgRequest;
wfDeprecated( __METHOD__, '1.24' );
return $wgRequest->getLimitOffset( $deflimit, $optionname );
}
/**
* Escapes the given text so that it may be output using addWikiText()
* without any linking, formatting, etc. making its way through. This
* is achieved by substituting certain characters with HTML entities.
* As required by the callers, "" is not used.
*
* @param string $text Text to be escaped
* @return string
*/
function wfEscapeWikiText( $text ) {
static $repl = null, $repl2 = null;
if ( $repl === null ) {
$repl = array(
'"' => '"', '&' => '&', "'" => ''', '<' => '<',
'=' => '=', '>' => '>', '[' => '[', ']' => ']',
'{' => '{', '|' => '|', '}' => '}', ';' => ';',
"\n#" => "\n#", "\r#" => "\r#",
"\n*" => "\n*", "\r*" => "\r*",
"\n:" => "\n:", "\r:" => "\r:",
"\n " => "\n ", "\r " => "\r ",
"\n\n" => "\n
", "\r\n" => "
\n",
"\n\r" => "\n
", "\r\r" => "\r
",
"\n\t" => "\n ", "\r\t" => "\r ", // "\n\t\n" is treated like "\n\n"
"\n----" => "\n----", "\r----" => "\r----",
'__' => '__', '://' => '://',
);
// We have to catch everything "\s" matches in PCRE
foreach ( array( 'ISBN', 'RFC', 'PMID' ) as $magic ) {
$repl["$magic "] = "$magic ";
$repl["$magic\t"] = "$magic ";
$repl["$magic\r"] = "$magic
";
$repl["$magic\n"] = "$magic
";
$repl["$magic\f"] = "$magic";
}
// And handle protocols that don't use "://"
global $wgUrlProtocols;
$repl2 = array();
foreach ( $wgUrlProtocols as $prot ) {
if ( substr( $prot, -1 ) === ':' ) {
$repl2[] = preg_quote( substr( $prot, 0, -1 ), '/' );
}
}
$repl2 = $repl2 ? '/\b(' . join( '|', $repl2 ) . '):/i' : '/^(?!)/';
}
$text = substr( strtr( "\n$text", $repl ), 1 );
$text = preg_replace( $repl2, '$1:', $text );
return $text;
}
/**
* Sets dest to source and returns the original value of dest
* If source is NULL, it just returns the value, it doesn't set the variable
* If force is true, it will set the value even if source is NULL
*
* @param mixed $dest
* @param mixed $source
* @param bool $force
* @return mixed
*/
function wfSetVar( &$dest, $source, $force = false ) {
$temp = $dest;
if ( !is_null( $source ) || $force ) {
$dest = $source;
}
return $temp;
}
/**
* As for wfSetVar except setting a bit
*
* @param int $dest
* @param int $bit
* @param bool $state
*
* @return bool
*/
function wfSetBit( &$dest, $bit, $state = true ) {
$temp = (bool)( $dest & $bit );
if ( !is_null( $state ) ) {
if ( $state ) {
$dest |= $bit;
} else {
$dest &= ~$bit;
}
}
return $temp;
}
/**
* A wrapper around the PHP function var_export().
* Either print it or add it to the regular output ($wgOut).
*
* @param mixed $var A PHP variable to dump.
*/
function wfVarDump( $var ) {
global $wgOut;
$s = str_replace( "\n", "
\n", var_export( $var, true ) . "\n" );
if ( headers_sent() || !isset( $wgOut ) || !is_object( $wgOut ) ) {
print $s;
} else {
$wgOut->addHTML( $s );
}
}
/**
* Provide a simple HTTP error.
*
* @param int|string $code
* @param string $label
* @param string $desc
*/
function wfHttpError( $code, $label, $desc ) {
global $wgOut;
header( "HTTP/1.0 $code $label" );
header( "Status: $code $label" );
if ( $wgOut ) {
$wgOut->disable();
$wgOut->sendCacheControl();
}
header( 'Content-type: text/html; charset=utf-8' );
print "" .
'' .
htmlspecialchars( $label ) .
'' .
htmlspecialchars( $label ) .
'
' .
nl2br( htmlspecialchars( $desc ) ) .
"
\n";
}
/**
* Clear away any user-level output buffers, discarding contents.
*
* Suitable for 'starting afresh', for instance when streaming
* relatively large amounts of data without buffering, or wanting to
* output image files without ob_gzhandler's compression.
*
* The optional $resetGzipEncoding parameter controls suppression of
* the Content-Encoding header sent by ob_gzhandler; by default it
* is left. See comments for wfClearOutputBuffers() for why it would
* be used.
*
* Note that some PHP configuration options may add output buffer
* layers which cannot be removed; these are left in place.
*
* @param bool $resetGzipEncoding
*/
function wfResetOutputBuffers( $resetGzipEncoding = true ) {
if ( $resetGzipEncoding ) {
// Suppress Content-Encoding and Content-Length
// headers from 1.10+s wfOutputHandler
global $wgDisableOutputCompression;
$wgDisableOutputCompression = true;
}
while ( $status = ob_get_status() ) {
if ( $status['type'] == 0 /* PHP_OUTPUT_HANDLER_INTERNAL */ ) {
// Probably from zlib.output_compression or other
// PHP-internal setting which can't be removed.
//
// Give up, and hope the result doesn't break
// output behavior.
break;
}
if ( !ob_end_clean() ) {
// Could not remove output buffer handler; abort now
// to avoid getting in some kind of infinite loop.
break;
}
if ( $resetGzipEncoding ) {
if ( $status['name'] == 'ob_gzhandler' ) {
// Reset the 'Content-Encoding' field set by this handler
// so we can start fresh.
header_remove( 'Content-Encoding' );
break;
}
}
}
}
/**
* More legible than passing a 'false' parameter to wfResetOutputBuffers():
*
* Clear away output buffers, but keep the Content-Encoding header
* produced by ob_gzhandler, if any.
*
* This should be used for HTTP 304 responses, where you need to
* preserve the Content-Encoding header of the real result, but
* also need to suppress the output of ob_gzhandler to keep to spec
* and avoid breaking Firefox in rare cases where the headers and
* body are broken over two packets.
*/
function wfClearOutputBuffers() {
wfResetOutputBuffers( false );
}
/**
* Converts an Accept-* header into an array mapping string values to quality
* factors
*
* @param string $accept
* @param string $def Default
* @return float[] Associative array of string => float pairs
*/
function wfAcceptToPrefs( $accept, $def = '*/*' ) {
# No arg means accept anything (per HTTP spec)
if ( !$accept ) {
return array( $def => 1.0 );
}
$prefs = array();
$parts = explode( ',', $accept );
foreach ( $parts as $part ) {
# @todo FIXME: Doesn't deal with params like 'text/html; level=1'
$values = explode( ';', trim( $part ) );
$match = array();
if ( count( $values ) == 1 ) {
$prefs[$values[0]] = 1.0;
} elseif ( preg_match( '/q\s*=\s*(\d*\.\d+)/', $values[1], $match ) ) {
$prefs[$values[0]] = floatval( $match[1] );
}
}
return $prefs;
}
/**
* Checks if a given MIME type matches any of the keys in the given
* array. Basic wildcards are accepted in the array keys.
*
* Returns the matching MIME type (or wildcard) if a match, otherwise
* NULL if no match.
*
* @param string $type
* @param array $avail
* @return string
* @private
*/
function mimeTypeMatch( $type, $avail ) {
if ( array_key_exists( $type, $avail ) ) {
return $type;
} else {
$parts = explode( '/', $type );
if ( array_key_exists( $parts[0] . '/*', $avail ) ) {
return $parts[0] . '/*';
} elseif ( array_key_exists( '*/*', $avail ) ) {
return '*/*';
} else {
return null;
}
}
}
/**
* Returns the 'best' match between a client's requested internet media types
* and the server's list of available types. Each list should be an associative
* array of type to preference (preference is a float between 0.0 and 1.0).
* Wildcards in the types are acceptable.
*
* @param array $cprefs Client's acceptable type list
* @param array $sprefs Server's offered types
* @return string
*
* @todo FIXME: Doesn't handle params like 'text/plain; charset=UTF-8'
* XXX: generalize to negotiate other stuff
*/
function wfNegotiateType( $cprefs, $sprefs ) {
$combine = array();
foreach ( array_keys( $sprefs ) as $type ) {
$parts = explode( '/', $type );
if ( $parts[1] != '*' ) {
$ckey = mimeTypeMatch( $type, $cprefs );
if ( $ckey ) {
$combine[$type] = $sprefs[$type] * $cprefs[$ckey];
}
}
}
foreach ( array_keys( $cprefs ) as $type ) {
$parts = explode( '/', $type );
if ( $parts[1] != '*' && !array_key_exists( $type, $sprefs ) ) {
$skey = mimeTypeMatch( $type, $sprefs );
if ( $skey ) {
$combine[$type] = $sprefs[$skey] * $cprefs[$type];
}
}
}
$bestq = 0;
$besttype = null;
foreach ( array_keys( $combine ) as $type ) {
if ( $combine[$type] > $bestq ) {
$besttype = $type;
$bestq = $combine[$type];
}
}
return $besttype;
}
/**
* Reference-counted warning suppression
*
* @param bool $end
*/
function wfSuppressWarnings( $end = false ) {
static $suppressCount = 0;
static $originalLevel = false;
if ( $end ) {
if ( $suppressCount ) {
--$suppressCount;
if ( !$suppressCount ) {
error_reporting( $originalLevel );
}
}
} else {
if ( !$suppressCount ) {
$originalLevel = error_reporting( E_ALL & ~(
E_WARNING |
E_NOTICE |
E_USER_WARNING |
E_USER_NOTICE |
E_DEPRECATED |
E_USER_DEPRECATED |
E_STRICT
) );
}
++$suppressCount;
}
}
/**
* Restore error level to previous value
*/
function wfRestoreWarnings() {
wfSuppressWarnings( true );
}
# Autodetect, convert and provide timestamps of various types
/**
* Unix time - the number of seconds since 1970-01-01 00:00:00 UTC
*/
define( 'TS_UNIX', 0 );
/**
* MediaWiki concatenated string timestamp (YYYYMMDDHHMMSS)
*/
define( 'TS_MW', 1 );
/**
* MySQL DATETIME (YYYY-MM-DD HH:MM:SS)
*/
define( 'TS_DB', 2 );
/**
* RFC 2822 format, for E-mail and HTTP headers
*/
define( 'TS_RFC2822', 3 );
/**
* ISO 8601 format with no timezone: 1986-02-09T20:00:00Z
*
* This is used by Special:Export
*/
define( 'TS_ISO_8601', 4 );
/**
* An Exif timestamp (YYYY:MM:DD HH:MM:SS)
*
* @see http://exif.org/Exif2-2.PDF The Exif 2.2 spec, see page 28 for the
* DateTime tag and page 36 for the DateTimeOriginal and
* DateTimeDigitized tags.
*/
define( 'TS_EXIF', 5 );
/**
* Oracle format time.
*/
define( 'TS_ORACLE', 6 );
/**
* Postgres format time.
*/
define( 'TS_POSTGRES', 7 );
/**
* ISO 8601 basic format with no timezone: 19860209T200000Z. This is used by ResourceLoader
*/
define( 'TS_ISO_8601_BASIC', 9 );
/**
* Get a timestamp string in one of various formats
*
* @param mixed $outputtype A timestamp in one of the supported formats, the
* function will autodetect which format is supplied and act accordingly.
* @param mixed $ts Optional timestamp to convert, default 0 for the current time
* @return string|bool String / false The same date in the format specified in $outputtype or false
*/
function wfTimestamp( $outputtype = TS_UNIX, $ts = 0 ) {
try {
$timestamp = new MWTimestamp( $ts );
return $timestamp->getTimestamp( $outputtype );
} catch ( TimestampException $e ) {
wfDebug( "wfTimestamp() fed bogus time value: TYPE=$outputtype; VALUE=$ts\n" );
return false;
}
}
/**
* Return a formatted timestamp, or null if input is null.
* For dealing with nullable timestamp columns in the database.
*
* @param int $outputtype
* @param string $ts
* @return string
*/
function wfTimestampOrNull( $outputtype = TS_UNIX, $ts = null ) {
if ( is_null( $ts ) ) {
return null;
} else {
return wfTimestamp( $outputtype, $ts );
}
}
/**
* Convenience function; returns MediaWiki timestamp for the present time.
*
* @return string
*/
function wfTimestampNow() {
# return NOW
return wfTimestamp( TS_MW, time() );
}
/**
* Check if the operating system is Windows
*
* @return bool True if it's Windows, false otherwise.
*/
function wfIsWindows() {
static $isWindows = null;
if ( $isWindows === null ) {
$isWindows = substr( php_uname(), 0, 7 ) == 'Windows';
}
return $isWindows;
}
/**
* Check if we are running under HHVM
*
* @return bool
*/
function wfIsHHVM() {
return defined( 'HHVM_VERSION' );
}
/**
* Tries to get the system directory for temporary files. First
* $wgTmpDirectory is checked, and then the TMPDIR, TMP, and TEMP
* environment variables are then checked in sequence, and if none are
* set try sys_get_temp_dir().
*
* NOTE: When possible, use instead the tmpfile() function to create
* temporary files to avoid race conditions on file creation, etc.
*
* @return string
*/
function wfTempDir() {
global $wgTmpDirectory;
if ( $wgTmpDirectory !== false ) {
return $wgTmpDirectory;
}
$tmpDir = array_map( "getenv", array( 'TMPDIR', 'TMP', 'TEMP' ) );
foreach ( $tmpDir as $tmp ) {
if ( $tmp && file_exists( $tmp ) && is_dir( $tmp ) && is_writable( $tmp ) ) {
return $tmp;
}
}
return sys_get_temp_dir();
}
/**
* Make directory, and make all parent directories if they don't exist
*
* @param string $dir Full path to directory to create
* @param int $mode Chmod value to use, default is $wgDirectoryMode
* @param string $caller Optional caller param for debugging.
* @throws MWException
* @return bool
*/
function wfMkdirParents( $dir, $mode = null, $caller = null ) {
global $wgDirectoryMode;
if ( FileBackend::isStoragePath( $dir ) ) { // sanity
throw new MWException( __FUNCTION__ . " given storage path '$dir'." );
}
if ( !is_null( $caller ) ) {
wfDebug( "$caller: called wfMkdirParents($dir)\n" );
}
if ( strval( $dir ) === '' || ( file_exists( $dir ) && is_dir( $dir ) ) ) {
return true;
}
$dir = str_replace( array( '\\', '/' ), DIRECTORY_SEPARATOR, $dir );
if ( is_null( $mode ) ) {
$mode = $wgDirectoryMode;
}
// Turn off the normal warning, we're doing our own below
wfSuppressWarnings();
$ok = mkdir( $dir, $mode, true ); // PHP5 <3
wfRestoreWarnings();
if ( !$ok ) {
//directory may have been created on another request since we last checked
if ( is_dir( $dir ) ) {
return true;
}
// PHP doesn't report the path in its warning message, so add our own to aid in diagnosis.
wfLogWarning( sprintf( "failed to mkdir \"%s\" mode 0%o", $dir, $mode ) );
}
return $ok;
}
/**
* Remove a directory and all its content.
* Does not hide error.
* @param string $dir
*/
function wfRecursiveRemoveDir( $dir ) {
wfDebug( __FUNCTION__ . "( $dir )\n" );
// taken from http://de3.php.net/manual/en/function.rmdir.php#98622
if ( is_dir( $dir ) ) {
$objects = scandir( $dir );
foreach ( $objects as $object ) {
if ( $object != "." && $object != ".." ) {
if ( filetype( $dir . '/' . $object ) == "dir" ) {
wfRecursiveRemoveDir( $dir . '/' . $object );
} else {
unlink( $dir . '/' . $object );
}
}
}
reset( $objects );
rmdir( $dir );
}
}
/**
* @param int $nr The number to format
* @param int $acc The number of digits after the decimal point, default 2
* @param bool $round Whether or not to round the value, default true
* @return string
*/
function wfPercent( $nr, $acc = 2, $round = true ) {
$ret = sprintf( "%.${acc}f", $nr );
return $round ? round( $ret, $acc ) . '%' : "$ret%";
}
/**
* Safety wrapper around ini_get() for boolean settings.
* The values returned from ini_get() are pre-normalized for settings
* set via php.ini or php_flag/php_admin_flag... but *not*
* for those set via php_value/php_admin_value.
*
* It's fairly common for people to use php_value instead of php_flag,
* which can leave you with an 'off' setting giving a false positive
* for code that just takes the ini_get() return value as a boolean.
*
* To make things extra interesting, setting via php_value accepts
* "true" and "yes" as true, but php.ini and php_flag consider them false. :)
* Unrecognized values go false... again opposite PHP's own coercion
* from string to bool.
*
* Luckily, 'properly' set settings will always come back as '0' or '1',
* so we only have to worry about them and the 'improper' settings.
*
* I frickin' hate PHP... :P
*
* @param string $setting
* @return bool
*/
function wfIniGetBool( $setting ) {
$val = strtolower( ini_get( $setting ) );
// 'on' and 'true' can't have whitespace around them, but '1' can.
return $val == 'on'
|| $val == 'true'
|| $val == 'yes'
|| preg_match( "/^\s*[+-]?0*[1-9]/", $val ); // approx C atoi() function
}
/**
* Windows-compatible version of escapeshellarg()
* Windows doesn't recognise single-quotes in the shell, but the escapeshellarg()
* function puts single quotes in regardless of OS.
*
* Also fixes the locale problems on Linux in PHP 5.2.6+ (bug backported to
* earlier distro releases of PHP)
*
* @param string ... strings to escape and glue together, or a single array of strings parameter
* @return string
*/
function wfEscapeShellArg( /*...*/ ) {
wfInitShellLocale();
$args = func_get_args();
if ( count( $args ) === 1 && is_array( reset( $args ) ) ) {
// If only one argument has been passed, and that argument is an array,
// treat it as a list of arguments
$args = reset( $args );
}
$first = true;
$retVal = '';
foreach ( $args as $arg ) {
if ( !$first ) {
$retVal .= ' ';
} else {
$first = false;
}
if ( wfIsWindows() ) {
// Escaping for an MSVC-style command line parser and CMD.EXE
// @codingStandardsIgnoreStart For long URLs
// Refs:
// * http://web.archive.org/web/20020708081031/http://mailman.lyra.org/pipermail/scite-interest/2002-March/000436.html
// * http://technet.microsoft.com/en-us/library/cc723564.aspx
// * Bug #13518
// * CR r63214
// Double the backslashes before any double quotes. Escape the double quotes.
// @codingStandardsIgnoreEnd
$tokens = preg_split( '/(\\\\*")/', $arg, -1, PREG_SPLIT_DELIM_CAPTURE );
$arg = '';
$iteration = 0;
foreach ( $tokens as $token ) {
if ( $iteration % 2 == 1 ) {
// Delimiter, a double quote preceded by zero or more slashes
$arg .= str_replace( '\\', '\\\\', substr( $token, 0, -1 ) ) . '\\"';
} elseif ( $iteration % 4 == 2 ) {
// ^ in $token will be outside quotes, need to be escaped
$arg .= str_replace( '^', '^^', $token );
} else { // $iteration % 4 == 0
// ^ in $token will appear inside double quotes, so leave as is
$arg .= $token;
}
$iteration++;
}
// Double the backslashes before the end of the string, because
// we will soon add a quote
$m = array();
if ( preg_match( '/^(.*?)(\\\\+)$/', $arg, $m ) ) {
$arg = $m[1] . str_replace( '\\', '\\\\', $m[2] );
}
// Add surrounding quotes
$retVal .= '"' . $arg . '"';
} else {
$retVal .= escapeshellarg( $arg );
}
}
return $retVal;
}
/**
* Check if wfShellExec() is effectively disabled via php.ini config
*
* @return bool|string False or one of (safemode,disabled)
* @since 1.22
*/
function wfShellExecDisabled() {
static $disabled = null;
if ( is_null( $disabled ) ) {
if ( wfIniGetBool( 'safe_mode' ) ) {
wfDebug( "wfShellExec can't run in safe_mode, PHP's exec functions are too broken.\n" );
$disabled = 'safemode';
} elseif ( !function_exists( 'proc_open' ) ) {
wfDebug( "proc_open() is disabled\n" );
$disabled = 'disabled';
} else {
$disabled = false;
}
}
return $disabled;
}
/**
* Execute a shell command, with time and memory limits mirrored from the PHP
* configuration if supported.
*
* @param string|string[] $cmd If string, a properly shell-escaped command line,
* or an array of unescaped arguments, in which case each value will be escaped
* Example: [ 'convert', '-font', 'font name' ] would produce "'convert' '-font' 'font name'"
* @param null|mixed &$retval Optional, will receive the program's exit code.
* (non-zero is usually failure). If there is an error from
* read, select, or proc_open(), this will be set to -1.
* @param array $environ Optional environment variables which should be
* added to the executed command environment.
* @param array $limits Optional array with limits(filesize, memory, time, walltime)
* this overwrites the global wgMaxShell* limits.
* @param array $options Array of options:
* - duplicateStderr: Set this to true to duplicate stderr to stdout,
* including errors from limit.sh
* - profileMethod: By default this function will profile based on the calling
* method. Set this to a string for an alternative method to profile from
*
* @return string Collected stdout as a string
*/
function wfShellExec( $cmd, &$retval = null, $environ = array(),
$limits = array(), $options = array()
) {
global $IP, $wgMaxShellMemory, $wgMaxShellFileSize, $wgMaxShellTime,
$wgMaxShellWallClockTime, $wgShellCgroup;
$disabled = wfShellExecDisabled();
if ( $disabled ) {
$retval = 1;
return $disabled == 'safemode' ?
'Unable to run external programs in safe mode.' :
'Unable to run external programs, proc_open() is disabled.';
}
$includeStderr = isset( $options['duplicateStderr'] ) && $options['duplicateStderr'];
$profileMethod = isset( $options['profileMethod'] ) ? $options['profileMethod'] : wfGetCaller();
wfInitShellLocale();
$envcmd = '';
foreach ( $environ as $k => $v ) {
if ( wfIsWindows() ) {
/* Surrounding a set in quotes (method used by wfEscapeShellArg) makes the quotes themselves
* appear in the environment variable, so we must use carat escaping as documented in
* http://technet.microsoft.com/en-us/library/cc723564.aspx
* Note however that the quote isn't listed there, but is needed, and the parentheses
* are listed there but doesn't appear to need it.
*/
$envcmd .= "set $k=" . preg_replace( '/([&|()<>^"])/', '^\\1', $v ) . '&& ';
} else {
/* Assume this is a POSIX shell, thus required to accept variable assignments before the command
* http://www.opengroup.org/onlinepubs/009695399/utilities/xcu_chap02.html#tag_02_09_01
*/
$envcmd .= "$k=" . escapeshellarg( $v ) . ' ';
}
}
if ( is_array( $cmd ) ) {
$cmd = wfEscapeShellArg( $cmd );
}
$cmd = $envcmd . $cmd;
$useLogPipe = false;
if ( is_executable( '/bin/bash' ) ) {
$time = intval ( isset( $limits['time'] ) ? $limits['time'] : $wgMaxShellTime );
if ( isset( $limits['walltime'] ) ) {
$wallTime = intval( $limits['walltime'] );
} elseif ( isset( $limits['time'] ) ) {
$wallTime = $time;
} else {
$wallTime = intval( $wgMaxShellWallClockTime );
}
$mem = intval ( isset( $limits['memory'] ) ? $limits['memory'] : $wgMaxShellMemory );
$filesize = intval ( isset( $limits['filesize'] ) ? $limits['filesize'] : $wgMaxShellFileSize );
if ( $time > 0 || $mem > 0 || $filesize > 0 || $wallTime > 0 ) {
$cmd = '/bin/bash ' . escapeshellarg( "$IP/includes/limit.sh" ) . ' ' .
escapeshellarg( $cmd ) . ' ' .
escapeshellarg(
"MW_INCLUDE_STDERR=" . ( $includeStderr ? '1' : '' ) . ';' .
"MW_CPU_LIMIT=$time; " .
'MW_CGROUP=' . escapeshellarg( $wgShellCgroup ) . '; ' .
"MW_MEM_LIMIT=$mem; " .
"MW_FILE_SIZE_LIMIT=$filesize; " .
"MW_WALL_CLOCK_LIMIT=$wallTime; " .
"MW_USE_LOG_PIPE=yes"
);
$useLogPipe = true;
} elseif ( $includeStderr ) {
$cmd .= ' 2>&1';
}
} elseif ( $includeStderr ) {
$cmd .= ' 2>&1';
}
wfDebug( "wfShellExec: $cmd\n" );
$desc = array(
0 => array( 'file', 'php://stdin', 'r' ),
1 => array( 'pipe', 'w' ),
2 => array( 'file', 'php://stderr', 'w' ) );
if ( $useLogPipe ) {
$desc[3] = array( 'pipe', 'w' );
}
$pipes = null;
$scoped = Profiler::instance()->scopedProfileIn( __FUNCTION__ . '-' . $profileMethod );
$proc = proc_open( $cmd, $desc, $pipes );
if ( !$proc ) {
wfDebugLog( 'exec', "proc_open() failed: $cmd" );
$retval = -1;
return '';
}
$outBuffer = $logBuffer = '';
$emptyArray = array();
$status = false;
$logMsg = false;
// According to the documentation, it is possible for stream_select()
// to fail due to EINTR. I haven't managed to induce this in testing
// despite sending various signals. If it did happen, the error
// message would take the form:
//
// stream_select(): unable to select [4]: Interrupted system call (max_fd=5)
//
// where [4] is the value of the macro EINTR and "Interrupted system
// call" is string which according to the Linux manual is "possibly"
// localised according to LC_MESSAGES.
$eintr = defined( 'SOCKET_EINTR' ) ? SOCKET_EINTR : 4;
$eintrMessage = "stream_select(): unable to select [$eintr]";
// Build a table mapping resource IDs to pipe FDs to work around a
// PHP 5.3 issue in which stream_select() does not preserve array keys
// .
$fds = array();
foreach ( $pipes as $fd => $pipe ) {
$fds[(int)$pipe] = $fd;
}
$running = true;
$timeout = null;
$numReadyPipes = 0;
while ( $running === true || $numReadyPipes !== 0 ) {
if ( $running ) {
$status = proc_get_status( $proc );
// If the process has terminated, switch to nonblocking selects
// for getting any data still waiting to be read.
if ( !$status['running'] ) {
$running = false;
$timeout = 0;
}
}
$readyPipes = $pipes;
// Clear last error
// @codingStandardsIgnoreStart Generic.PHP.NoSilencedErrors.Discouraged
@trigger_error( '' );
$numReadyPipes = @stream_select( $readyPipes, $emptyArray, $emptyArray, $timeout );
if ( $numReadyPipes === false ) {
// @codingStandardsIgnoreEnd
$error = error_get_last();
if ( strncmp( $error['message'], $eintrMessage, strlen( $eintrMessage ) ) == 0 ) {
continue;
} else {
trigger_error( $error['message'], E_USER_WARNING );
$logMsg = $error['message'];
break;
}
}
foreach ( $readyPipes as $pipe ) {
$block = fread( $pipe, 65536 );
$fd = $fds[(int)$pipe];
if ( $block === '' ) {
// End of file
fclose( $pipes[$fd] );
unset( $pipes[$fd] );
if ( !$pipes ) {
break 2;
}
} elseif ( $block === false ) {
// Read error
$logMsg = "Error reading from pipe";
break 2;
} elseif ( $fd == 1 ) {
// From stdout
$outBuffer .= $block;
} elseif ( $fd == 3 ) {
// From log FD
$logBuffer .= $block;
if ( strpos( $block, "\n" ) !== false ) {
$lines = explode( "\n", $logBuffer );
$logBuffer = array_pop( $lines );
foreach ( $lines as $line ) {
wfDebugLog( 'exec', $line );
}
}
}
}
}
foreach ( $pipes as $pipe ) {
fclose( $pipe );
}
// Use the status previously collected if possible, since proc_get_status()
// just calls waitpid() which will not return anything useful the second time.
if ( $running ) {
$status = proc_get_status( $proc );
}
if ( $logMsg !== false ) {
// Read/select error
$retval = -1;
proc_close( $proc );
} elseif ( $status['signaled'] ) {
$logMsg = "Exited with signal {$status['termsig']}";
$retval = 128 + $status['termsig'];
proc_close( $proc );
} else {
if ( $status['running'] ) {
$retval = proc_close( $proc );
} else {
$retval = $status['exitcode'];
proc_close( $proc );
}
if ( $retval == 127 ) {
$logMsg = "Possibly missing executable file";
} elseif ( $retval >= 129 && $retval <= 192 ) {
$logMsg = "Probably exited with signal " . ( $retval - 128 );
}
}
if ( $logMsg !== false ) {
wfDebugLog( 'exec', "$logMsg: $cmd" );
}
return $outBuffer;
}
/**
* Execute a shell command, returning both stdout and stderr. Convenience
* function, as all the arguments to wfShellExec can become unwieldy.
*
* @note This also includes errors from limit.sh, e.g. if $wgMaxShellFileSize is exceeded.
* @param string|string[] $cmd If string, a properly shell-escaped command line,
* or an array of unescaped arguments, in which case each value will be escaped
* Example: [ 'convert', '-font', 'font name' ] would produce "'convert' '-font' 'font name'"
* @param null|mixed &$retval Optional, will receive the program's exit code.
* (non-zero is usually failure)
* @param array $environ Optional environment variables which should be
* added to the executed command environment.
* @param array $limits Optional array with limits(filesize, memory, time, walltime)
* this overwrites the global wgMaxShell* limits.
* @return string Collected stdout and stderr as a string
*/
function wfShellExecWithStderr( $cmd, &$retval = null, $environ = array(), $limits = array() ) {
return wfShellExec( $cmd, $retval, $environ, $limits,
array( 'duplicateStderr' => true, 'profileMethod' => wfGetCaller() ) );
}
/**
* Workaround for http://bugs.php.net/bug.php?id=45132
* escapeshellarg() destroys non-ASCII characters if LANG is not a UTF-8 locale
*/
function wfInitShellLocale() {
static $done = false;
if ( $done ) {
return;
}
$done = true;
global $wgShellLocale;
if ( !wfIniGetBool( 'safe_mode' ) ) {
putenv( "LC_CTYPE=$wgShellLocale" );
setlocale( LC_CTYPE, $wgShellLocale );
}
}
/**
* Generate a shell-escaped command line string to run a MediaWiki cli script.
* Note that $parameters should be a flat array and an option with an argument
* should consist of two consecutive items in the array (do not use "--option value").
*
* @param string $script MediaWiki cli script path
* @param array $parameters Arguments and options to the script
* @param array $options Associative array of options:
* 'php': The path to the php executable
* 'wrapper': Path to a PHP wrapper to handle the maintenance script
* @return string
*/
function wfShellWikiCmd( $script, array $parameters = array(), array $options = array() ) {
global $wgPhpCli;
// Give site config file a chance to run the script in a wrapper.
// The caller may likely want to call wfBasename() on $script.
Hooks::run( 'wfShellWikiCmd', array( &$script, &$parameters, &$options ) );
$cmd = isset( $options['php'] ) ? array( $options['php'] ) : array( $wgPhpCli );
if ( isset( $options['wrapper'] ) ) {
$cmd[] = $options['wrapper'];
}
$cmd[] = $script;
// Escape each parameter for shell
return wfEscapeShellArg( array_merge( $cmd, $parameters ) );
}
/**
* wfMerge attempts to merge differences between three texts.
* Returns true for a clean merge and false for failure or a conflict.
*
* @param string $old
* @param string $mine
* @param string $yours
* @param string $result
* @return bool
*/
function wfMerge( $old, $mine, $yours, &$result ) {
global $wgDiff3;
# This check may also protect against code injection in
# case of broken installations.
wfSuppressWarnings();
$haveDiff3 = $wgDiff3 && file_exists( $wgDiff3 );
wfRestoreWarnings();
if ( !$haveDiff3 ) {
wfDebug( "diff3 not found\n" );
return false;
}
# Make temporary files
$td = wfTempDir();
$oldtextFile = fopen( $oldtextName = tempnam( $td, 'merge-old-' ), 'w' );
$mytextFile = fopen( $mytextName = tempnam( $td, 'merge-mine-' ), 'w' );
$yourtextFile = fopen( $yourtextName = tempnam( $td, 'merge-your-' ), 'w' );
# NOTE: diff3 issues a warning to stderr if any of the files does not end with
# a newline character. To avoid this, we normalize the trailing whitespace before
# creating the diff.
fwrite( $oldtextFile, rtrim( $old ) . "\n" );
fclose( $oldtextFile );
fwrite( $mytextFile, rtrim( $mine ) . "\n" );
fclose( $mytextFile );
fwrite( $yourtextFile, rtrim( $yours ) . "\n" );
fclose( $yourtextFile );
# Check for a conflict
$cmd = wfEscapeShellArg( $wgDiff3, '-a', '--overlap-only', $mytextName,
$oldtextName, $yourtextName );
$handle = popen( $cmd, 'r' );
if ( fgets( $handle, 1024 ) ) {
$conflict = true;
} else {
$conflict = false;
}
pclose( $handle );
# Merge differences
$cmd = wfEscapeShellArg( $wgDiff3, '-a', '-e', '--merge', $mytextName,
$oldtextName, $yourtextName );
$handle = popen( $cmd, 'r' );
$result = '';
do {
$data = fread( $handle, 8192 );
if ( strlen( $data ) == 0 ) {
break;
}
$result .= $data;
} while ( true );
pclose( $handle );
unlink( $mytextName );
unlink( $oldtextName );
unlink( $yourtextName );
if ( $result === '' && $old !== '' && !$conflict ) {
wfDebug( "Unexpected null result from diff3. Command: $cmd\n" );
$conflict = true;
}
return !$conflict;
}
/**
* Returns unified plain-text diff of two texts.
* "Useful" for machine processing of diffs.
*
* @deprecated since 1.25, use DiffEngine/UnifiedDiffFormatter directly
*
* @param string $before The text before the changes.
* @param string $after The text after the changes.
* @param string $params Command-line options for the diff command.
* @return string Unified diff of $before and $after
*/
function wfDiff( $before, $after, $params = '-u' ) {
if ( $before == $after ) {
return '';
}
global $wgDiff;
wfSuppressWarnings();
$haveDiff = $wgDiff && file_exists( $wgDiff );
wfRestoreWarnings();
# This check may also protect against code injection in
# case of broken installations.
if ( !$haveDiff ) {
wfDebug( "diff executable not found\n" );
$diffs = new Diff( explode( "\n", $before ), explode( "\n", $after ) );
$format = new UnifiedDiffFormatter();
return $format->format( $diffs );
}
# Make temporary files
$td = wfTempDir();
$oldtextFile = fopen( $oldtextName = tempnam( $td, 'merge-old-' ), 'w' );
$newtextFile = fopen( $newtextName = tempnam( $td, 'merge-your-' ), 'w' );
fwrite( $oldtextFile, $before );
fclose( $oldtextFile );
fwrite( $newtextFile, $after );
fclose( $newtextFile );
// Get the diff of the two files
$cmd = "$wgDiff " . $params . ' ' . wfEscapeShellArg( $oldtextName, $newtextName );
$h = popen( $cmd, 'r' );
if ( !$h ) {
unlink( $oldtextName );
unlink( $newtextName );
throw new Exception( __METHOD__ . '(): popen() failed' );
}
$diff = '';
do {
$data = fread( $h, 8192 );
if ( strlen( $data ) == 0 ) {
break;
}
$diff .= $data;
} while ( true );
// Clean up
pclose( $h );
unlink( $oldtextName );
unlink( $newtextName );
// Kill the --- and +++ lines. They're not useful.
$diff_lines = explode( "\n", $diff );
if ( isset( $diff_lines[0] ) && strpos( $diff_lines[0], '---' ) === 0 ) {
unset( $diff_lines[0] );
}
if ( isset( $diff_lines[1] ) && strpos( $diff_lines[1], '+++' ) === 0 ) {
unset( $diff_lines[1] );
}
$diff = implode( "\n", $diff_lines );
return $diff;
}
/**
* This function works like "use VERSION" in Perl, the program will die with a
* backtrace if the current version of PHP is less than the version provided
*
* This is useful for extensions which due to their nature are not kept in sync
* with releases, and might depend on other versions of PHP than the main code
*
* Note: PHP might die due to parsing errors in some cases before it ever
* manages to call this function, such is life
*
* @see perldoc -f use
*
* @param string|int|float $req_ver The version to check, can be a string, an integer, or a float
* @throws MWException
*/
function wfUsePHP( $req_ver ) {
$php_ver = PHP_VERSION;
if ( version_compare( $php_ver, (string)$req_ver, '<' ) ) {
throw new MWException( "PHP $req_ver required--this is only $php_ver" );
}
}
/**
* This function works like "use VERSION" in Perl except it checks the version
* of MediaWiki, the program will die with a backtrace if the current version
* of MediaWiki is less than the version provided.
*
* This is useful for extensions which due to their nature are not kept in sync
* with releases
*
* Note: Due to the behavior of PHP's version_compare() which is used in this
* function, if you want to allow the 'wmf' development versions add a 'c' (or
* any single letter other than 'a', 'b' or 'p') as a post-fix to your
* targeted version number. For example if you wanted to allow any variation
* of 1.22 use `wfUseMW( '1.22c' )`. Using an 'a' or 'b' instead of 'c' will
* not result in the same comparison due to the internal logic of
* version_compare().
*
* @see perldoc -f use
*
* @param string|int|float $req_ver The version to check, can be a string, an integer, or a float
* @throws MWException
*/
function wfUseMW( $req_ver ) {
global $wgVersion;
if ( version_compare( $wgVersion, (string)$req_ver, '<' ) ) {
throw new MWException( "MediaWiki $req_ver required--this is only $wgVersion" );
}
}
/**
* Return the final portion of a pathname.
* Reimplemented because PHP5's "basename()" is buggy with multibyte text.
* http://bugs.php.net/bug.php?id=33898
*
* PHP's basename() only considers '\' a pathchar on Windows and Netware.
* We'll consider it so always, as we don't want '\s' in our Unix paths either.
*
* @param string $path
* @param string $suffix String to remove if present
* @return string
*/
function wfBaseName( $path, $suffix = '' ) {
if ( $suffix == '' ) {
$encSuffix = '';
} else {
$encSuffix = '(?:' . preg_quote( $suffix, '#' ) . ')?';
}
$matches = array();
if ( preg_match( "#([^/\\\\]*?){$encSuffix}[/\\\\]*$#", $path, $matches ) ) {
return $matches[1];
} else {
return '';
}
}
/**
* Generate a relative path name to the given file.
* May explode on non-matching case-insensitive paths,
* funky symlinks, etc.
*
* @param string $path Absolute destination path including target filename
* @param string $from Absolute source path, directory only
* @return string
*/
function wfRelativePath( $path, $from ) {
// Normalize mixed input on Windows...
$path = str_replace( '/', DIRECTORY_SEPARATOR, $path );
$from = str_replace( '/', DIRECTORY_SEPARATOR, $from );
// Trim trailing slashes -- fix for drive root
$path = rtrim( $path, DIRECTORY_SEPARATOR );
$from = rtrim( $from, DIRECTORY_SEPARATOR );
$pieces = explode( DIRECTORY_SEPARATOR, dirname( $path ) );
$against = explode( DIRECTORY_SEPARATOR, $from );
if ( $pieces[0] !== $against[0] ) {
// Non-matching Windows drive letters?
// Return a full path.
return $path;
}
// Trim off common prefix
while ( count( $pieces ) && count( $against )
&& $pieces[0] == $against[0] ) {
array_shift( $pieces );
array_shift( $against );
}
// relative dots to bump us to the parent
while ( count( $against ) ) {
array_unshift( $pieces, '..' );
array_shift( $against );
}
array_push( $pieces, wfBaseName( $path ) );
return implode( DIRECTORY_SEPARATOR, $pieces );
}
/**
* Convert an arbitrarily-long digit string from one numeric base
* to another, optionally zero-padding to a minimum column width.
*
* Supports base 2 through 36; digit values 10-36 are represented
* as lowercase letters a-z. Input is case-insensitive.
*
* @param string $input Input number
* @param int $sourceBase Base of the input number
* @param int $destBase Desired base of the output
* @param int $pad Minimum number of digits in the output (pad with zeroes)
* @param bool $lowercase Whether to output in lowercase or uppercase
* @param string $engine Either "gmp", "bcmath", or "php"
* @return string|bool The output number as a string, or false on error
*/
function wfBaseConvert( $input, $sourceBase, $destBase, $pad = 1,
$lowercase = true, $engine = 'auto'
) {
$input = (string)$input;
if (
$sourceBase < 2 ||
$sourceBase > 36 ||
$destBase < 2 ||
$destBase > 36 ||
$sourceBase != (int)$sourceBase ||
$destBase != (int)$destBase ||
$pad != (int)$pad ||
!preg_match(
"/^[" . substr( '0123456789abcdefghijklmnopqrstuvwxyz', 0, $sourceBase ) . "]+$/i",
$input
)
) {
return false;
}
static $baseChars = array(
10 => 'a', 11 => 'b', 12 => 'c', 13 => 'd', 14 => 'e', 15 => 'f',
16 => 'g', 17 => 'h', 18 => 'i', 19 => 'j', 20 => 'k', 21 => 'l',
22 => 'm', 23 => 'n', 24 => 'o', 25 => 'p', 26 => 'q', 27 => 'r',
28 => 's', 29 => 't', 30 => 'u', 31 => 'v', 32 => 'w', 33 => 'x',
34 => 'y', 35 => 'z',
'0' => 0, '1' => 1, '2' => 2, '3' => 3, '4' => 4, '5' => 5,
'6' => 6, '7' => 7, '8' => 8, '9' => 9, 'a' => 10, 'b' => 11,
'c' => 12, 'd' => 13, 'e' => 14, 'f' => 15, 'g' => 16, 'h' => 17,
'i' => 18, 'j' => 19, 'k' => 20, 'l' => 21, 'm' => 22, 'n' => 23,
'o' => 24, 'p' => 25, 'q' => 26, 'r' => 27, 's' => 28, 't' => 29,
'u' => 30, 'v' => 31, 'w' => 32, 'x' => 33, 'y' => 34, 'z' => 35
);
if ( extension_loaded( 'gmp' ) && ( $engine == 'auto' || $engine == 'gmp' ) ) {
// Removing leading zeros works around broken base detection code in
// some PHP versions (see and
// ).
$result = gmp_strval( gmp_init( ltrim( $input, '0' ) ?: '0', $sourceBase ), $destBase );
} elseif ( extension_loaded( 'bcmath' ) && ( $engine == 'auto' || $engine == 'bcmath' ) ) {
$decimal = '0';
foreach ( str_split( strtolower( $input ) ) as $char ) {
$decimal = bcmul( $decimal, $sourceBase );
$decimal = bcadd( $decimal, $baseChars[$char] );
}
// @codingStandardsIgnoreStart Generic.CodeAnalysis.ForLoopWithTestFunctionCall.NotAllowed
for ( $result = ''; bccomp( $decimal, 0 ); $decimal = bcdiv( $decimal, $destBase, 0 ) ) {
$result .= $baseChars[bcmod( $decimal, $destBase )];
}
// @codingStandardsIgnoreEnd
$result = strrev( $result );
} else {
$inDigits = array();
foreach ( str_split( strtolower( $input ) ) as $char ) {
$inDigits[] = $baseChars[$char];
}
// Iterate over the input, modulo-ing out an output digit
// at a time until input is gone.
$result = '';
while ( $inDigits ) {
$work = 0;
$workDigits = array();
// Long division...
foreach ( $inDigits as $digit ) {
$work *= $sourceBase;
$work += $digit;
if ( $workDigits || $work >= $destBase ) {
$workDigits[] = (int)( $work / $destBase );
}
$work %= $destBase;
}
// All that division leaves us with a remainder,
// which is conveniently our next output digit.
$result .= $baseChars[$work];
// And we continue!
$inDigits = $workDigits;
}
$result = strrev( $result );
}
if ( !$lowercase ) {
$result = strtoupper( $result );
}
return str_pad( $result, $pad, '0', STR_PAD_LEFT );
}
/**
* Check if there is sufficient entropy in php's built-in session generation
*
* @return bool True = there is sufficient entropy
*/
function wfCheckEntropy() {
return (
( wfIsWindows() && version_compare( PHP_VERSION, '5.3.3', '>=' ) )
|| ini_get( 'session.entropy_file' )
)
&& intval( ini_get( 'session.entropy_length' ) ) >= 32;
}
/**
* Override session_id before session startup if php's built-in
* session generation code is not secure.
*/
function wfFixSessionID() {
// If the cookie or session id is already set we already have a session and should abort
if ( isset( $_COOKIE[session_name()] ) || session_id() ) {
return;
}
// PHP's built-in session entropy is enabled if:
// - entropy_file is set or you're on Windows with php 5.3.3+
// - AND entropy_length is > 0
// We treat it as disabled if it doesn't have an entropy length of at least 32
$entropyEnabled = wfCheckEntropy();
// If built-in entropy is not enabled or not sufficient override PHP's
// built in session id generation code
if ( !$entropyEnabled ) {
wfDebug( __METHOD__ . ": PHP's built in entropy is disabled or not sufficient, " .
"overriding session id generation using our cryptrand source.\n" );
session_id( MWCryptRand::generateHex( 32 ) );
}
}
/**
* Reset the session_id
*
* @since 1.22
*/
function wfResetSessionID() {
global $wgCookieSecure;
$oldSessionId = session_id();
$cookieParams = session_get_cookie_params();
if ( wfCheckEntropy() && $wgCookieSecure == $cookieParams['secure'] ) {
session_regenerate_id( false );
} else {
$tmp = $_SESSION;
session_destroy();
wfSetupSession( MWCryptRand::generateHex( 32 ) );
$_SESSION = $tmp;
}
$newSessionId = session_id();
Hooks::run( 'ResetSessionID', array( $oldSessionId, $newSessionId ) );
}
/**
* Initialise php session
*
* @param bool $sessionId
*/
function wfSetupSession( $sessionId = false ) {
global $wgSessionsInMemcached, $wgSessionsInObjectCache, $wgCookiePath, $wgCookieDomain,
$wgCookieSecure, $wgCookieHttpOnly, $wgSessionHandler;
if ( $wgSessionsInObjectCache || $wgSessionsInMemcached ) {
ObjectCacheSessionHandler::install();
} elseif ( $wgSessionHandler && $wgSessionHandler != ini_get( 'session.save_handler' ) ) {
# Only set this if $wgSessionHandler isn't null and session.save_handler
# hasn't already been set to the desired value (that causes errors)
ini_set( 'session.save_handler', $wgSessionHandler );
}
session_set_cookie_params(
0, $wgCookiePath, $wgCookieDomain, $wgCookieSecure, $wgCookieHttpOnly );
session_cache_limiter( 'private, must-revalidate' );
if ( $sessionId ) {
session_id( $sessionId );
} else {
wfFixSessionID();
}
wfSuppressWarnings();
session_start();
wfRestoreWarnings();
}
/**
* Get an object from the precompiled serialized directory
*
* @param string $name
* @return mixed The variable on success, false on failure
*/
function wfGetPrecompiledData( $name ) {
global $IP;
$file = "$IP/serialized/$name";
if ( file_exists( $file ) ) {
$blob = file_get_contents( $file );
if ( $blob ) {
return unserialize( $blob );
}
}
return false;
}
/**
* Get a cache key
*
* @param string $args,...
* @return string
*/
function wfMemcKey( /*...*/ ) {
global $wgCachePrefix;
$prefix = $wgCachePrefix === false ? wfWikiID() : $wgCachePrefix;
$args = func_get_args();
$key = $prefix . ':' . implode( ':', $args );
$key = str_replace( ' ', '_', $key );
return $key;
}
/**
* Get a cache key for a foreign DB
*
* @param string $db
* @param string $prefix
* @param string $args,...
* @return string
*/
function wfForeignMemcKey( $db, $prefix /*...*/ ) {
$args = array_slice( func_get_args(), 2 );
if ( $prefix ) {
$key = "$db-$prefix:" . implode( ':', $args );
} else {
$key = $db . ':' . implode( ':', $args );
}
return str_replace( ' ', '_', $key );
}
/**
* Get an ASCII string identifying this wiki
* This is used as a prefix in memcached keys
*
* @return string
*/
function wfWikiID() {
global $wgDBprefix, $wgDBname;
if ( $wgDBprefix ) {
return "$wgDBname-$wgDBprefix";
} else {
return $wgDBname;
}
}
/**
* Split a wiki ID into DB name and table prefix
*
* @param string $wiki
*
* @return array
*/
function wfSplitWikiID( $wiki ) {
$bits = explode( '-', $wiki, 2 );
if ( count( $bits ) < 2 ) {
$bits[] = '';
}
return $bits;
}
/**
* Get a Database object.
*
* @param int $db Index of the connection to get. May be DB_MASTER for the
* master (for write queries), DB_SLAVE for potentially lagged read
* queries, or an integer >= 0 for a particular server.
*
* @param string|string[] $groups Query groups. An array of group names that this query
* belongs to. May contain a single string if the query is only
* in one group.
*
* @param string|bool $wiki The wiki ID, or false for the current wiki
*
* Note: multiple calls to wfGetDB(DB_SLAVE) during the course of one request
* will always return the same object, unless the underlying connection or load
* balancer is manually destroyed.
*
* Note 2: use $this->getDB() in maintenance scripts that may be invoked by
* updater to ensure that a proper database is being updated.
*
* @return DatabaseBase
*/
function wfGetDB( $db, $groups = array(), $wiki = false ) {
return wfGetLB( $wiki )->getConnection( $db, $groups, $wiki );
}
/**
* Get a load balancer object.
*
* @param string|bool $wiki Wiki ID, or false for the current wiki
* @return LoadBalancer
*/
function wfGetLB( $wiki = false ) {
return wfGetLBFactory()->getMainLB( $wiki );
}
/**
* Get the load balancer factory object
*
* @return LBFactory
*/
function wfGetLBFactory() {
return LBFactory::singleton();
}
/**
* Find a file.
* Shortcut for RepoGroup::singleton()->findFile()
*
* @param string $title String or Title object
* @param array $options Associative array of options (see RepoGroup::findFile)
* @return File|bool File, or false if the file does not exist
*/
function wfFindFile( $title, $options = array() ) {
return RepoGroup::singleton()->findFile( $title, $options );
}
/**
* Get an object referring to a locally registered file.
* Returns a valid placeholder object if the file does not exist.
*
* @param Title|string $title
* @return LocalFile|null A File, or null if passed an invalid Title
*/
function wfLocalFile( $title ) {
return RepoGroup::singleton()->getLocalRepo()->newFile( $title );
}
/**
* Should low-performance queries be disabled?
*
* @return bool
* @codeCoverageIgnore
*/
function wfQueriesMustScale() {
global $wgMiserMode;
return $wgMiserMode
|| ( SiteStats::pages() > 100000
&& SiteStats::edits() > 1000000
&& SiteStats::users() > 10000 );
}
/**
* Get the path to a specified script file, respecting file
* extensions; this is a wrapper around $wgScriptExtension etc.
* except for 'index' and 'load' which use $wgScript/$wgLoadScript
*
* @param string $script Script filename, sans extension
* @return string
*/
function wfScript( $script = 'index' ) {
global $wgScriptPath, $wgScriptExtension, $wgScript, $wgLoadScript;
if ( $script === 'index' ) {
return $wgScript;
} elseif ( $script === 'load' ) {
return $wgLoadScript;
} else {
return "{$wgScriptPath}/{$script}{$wgScriptExtension}";
}
}
/**
* Get the script URL.
*
* @return string Script URL
*/
function wfGetScriptUrl() {
if ( isset( $_SERVER['SCRIPT_NAME'] ) ) {
#
# as it was called, minus the query string.
#
# Some sites use Apache rewrite rules to handle subdomains,
# and have PHP set up in a weird way that causes PHP_SELF
# to contain the rewritten URL instead of the one that the
# outside world sees.
#
# If in this mode, use SCRIPT_URL instead, which mod_rewrite
# provides containing the "before" URL.
return $_SERVER['SCRIPT_NAME'];
} else {
return $_SERVER['URL'];
}
}
/**
* Convenience function converts boolean values into "true"
* or "false" (string) values
*
* @param bool $value
* @return string
*/
function wfBoolToStr( $value ) {
return $value ? 'true' : 'false';
}
/**
* Get a platform-independent path to the null file, e.g. /dev/null
*
* @return string
*/
function wfGetNull() {
return wfIsWindows() ? 'NUL' : '/dev/null';
}
/**
* Waits for the slaves to catch up to the master position
*
* Use this when updating very large numbers of rows, as in maintenance scripts,
* to avoid causing too much lag. Of course, this is a no-op if there are no slaves.
*
* By default this waits on the main DB cluster of the current wiki.
* If $cluster is set to "*" it will wait on all DB clusters, including
* external ones. If the lag being waiting on is caused by the code that
* does this check, it makes since to use $ifWritesSince, particularly if
* cluster is "*", to avoid excess overhead.
*
* Never call this function after a big DB write that is still in a transaction.
* This only makes sense after the possible lag inducing changes were committed.
*
* @param float|null $ifWritesSince Only wait if writes were done since this UNIX timestamp
* @param string|bool $wiki Wiki identifier accepted by wfGetLB
* @param string|bool $cluster Cluster name accepted by LBFactory. Default: false.
* @param int|null $timeout Max wait time. Default: 1 day (cli), ~10 seconds (web)
* @return bool Success (able to connect and no timeouts reached)
*/
function wfWaitForSlaves(
$ifWritesSince = null, $wiki = false, $cluster = false, $timeout = null
) {
// B/C: first argument used to be "max seconds of lag"; ignore such values
$ifWritesSince = ( $ifWritesSince > 1e9 ) ? $ifWritesSince : null;
if ( $timeout === null ) {
$timeout = ( PHP_SAPI === 'cli' ) ? 86400 : 10;
}
// Figure out which clusters need to be checked
$lbs = array();
if ( $cluster === '*' ) {
wfGetLBFactory()->forEachLB( function ( LoadBalancer $lb ) use ( &$lbs ) {
$lbs[] = $lb;
} );
} elseif ( $cluster !== false ) {
$lbs[] = wfGetLBFactory()->getExternalLB( $cluster );
} else {
$lbs[] = wfGetLB( $wiki );
}
// Get all the master positions of applicable DBs right now.
// This can be faster since waiting on one cluster reduces the
// time needed to wait on the next clusters.
$masterPositions = array_fill( 0, count( $lbs ), false );
foreach ( $lbs as $i => $lb ) {
// bug 27975 - Don't try to wait for slaves if there are none
// Prevents permission error when getting master position
if ( $lb->getServerCount() > 1 ) {
if ( $ifWritesSince && !$lb->hasMasterConnection() ) {
continue; // assume no writes done
}
// Use the empty string to not trigger selectDB() since the connection
// may have been to a server that does not have a DB for the current wiki.
$dbw = $lb->getConnection( DB_MASTER, array(), '' );
if ( $ifWritesSince && $dbw->lastDoneWrites() < $ifWritesSince ) {
continue; // no writes since the last wait
}
$masterPositions[$i] = $dbw->getMasterPos();
}
}
$ok = true;
foreach ( $lbs as $i => $lb ) {
if ( $masterPositions[$i] ) {
// The DBMS may not support getMasterPos() or the whole
// load balancer might be fake (e.g. $wgAllDBsAreLocalhost).
$ok = $lb->waitForAll( $masterPositions[$i], $timeout ) && $ok;
}
}
return $ok;
}
/**
* Count down from $seconds to zero on the terminal, with a one-second pause
* between showing each number. For use in command-line scripts.
*
* @codeCoverageIgnore
* @param int $seconds
*/
function wfCountDown( $seconds ) {
for ( $i = $seconds; $i >= 0; $i-- ) {
if ( $i != $seconds ) {
echo str_repeat( "\x08", strlen( $i + 1 ) );
}
echo $i;
flush();
if ( $i ) {
sleep( 1 );
}
}
echo "\n";
}
/**
* Replace all invalid characters with -
* Additional characters can be defined in $wgIllegalFileChars (see bug 20489)
* By default, $wgIllegalFileChars = ':'
*
* @param string $name Filename to process
* @return string
*/
function wfStripIllegalFilenameChars( $name ) {
global $wgIllegalFileChars;
$illegalFileChars = $wgIllegalFileChars ? "|[" . $wgIllegalFileChars . "]" : '';
$name = wfBaseName( $name );
$name = preg_replace(
"/[^" . Title::legalChars() . "]" . $illegalFileChars . "/",
'-',
$name
);
return $name;
}
/**
* Set PHP's memory limit to the larger of php.ini or $wgMemoryLimit;
*
* @return int Value the memory limit was set to.
*/
function wfMemoryLimit() {
global $wgMemoryLimit;
$memlimit = wfShorthandToInteger( ini_get( 'memory_limit' ) );
if ( $memlimit != -1 ) {
$conflimit = wfShorthandToInteger( $wgMemoryLimit );
if ( $conflimit == -1 ) {
wfDebug( "Removing PHP's memory limit\n" );
wfSuppressWarnings();
ini_set( 'memory_limit', $conflimit );
wfRestoreWarnings();
return $conflimit;
} elseif ( $conflimit > $memlimit ) {
wfDebug( "Raising PHP's memory limit to $conflimit bytes\n" );
wfSuppressWarnings();
ini_set( 'memory_limit', $conflimit );
wfRestoreWarnings();
return $conflimit;
}
}
return $memlimit;
}
/**
* Converts shorthand byte notation to integer form
*
* @param string $string
* @return int
*/
function wfShorthandToInteger( $string = '' ) {
$string = trim( $string );
if ( $string === '' ) {
return -1;
}
$last = $string[strlen( $string ) - 1];
$val = intval( $string );
switch ( $last ) {
case 'g':
case 'G':
$val *= 1024;
// break intentionally missing
case 'm':
case 'M':
$val *= 1024;
// break intentionally missing
case 'k':
case 'K':
$val *= 1024;
}
return $val;
}
/**
* Get the normalised IETF language tag
* See unit test for examples.
*
* @param string $code The language code.
* @return string The language code which complying with BCP 47 standards.
*/
function wfBCP47( $code ) {
$codeSegment = explode( '-', $code );
$codeBCP = array();
foreach ( $codeSegment as $segNo => $seg ) {
// when previous segment is x, it is a private segment and should be lc
if ( $segNo > 0 && strtolower( $codeSegment[( $segNo - 1 )] ) == 'x' ) {
$codeBCP[$segNo] = strtolower( $seg );
// ISO 3166 country code
} elseif ( ( strlen( $seg ) == 2 ) && ( $segNo > 0 ) ) {
$codeBCP[$segNo] = strtoupper( $seg );
// ISO 15924 script code
} elseif ( ( strlen( $seg ) == 4 ) && ( $segNo > 0 ) ) {
$codeBCP[$segNo] = ucfirst( strtolower( $seg ) );
// Use lowercase for other cases
} else {
$codeBCP[$segNo] = strtolower( $seg );
}
}
$langCode = implode( '-', $codeBCP );
return $langCode;
}
/**
* Get a cache object.
*
* @param int $inputType Cache type, one of the CACHE_* constants.
* @return BagOStuff
*/
function wfGetCache( $inputType ) {
return ObjectCache::getInstance( $inputType );
}
/**
* Get the main cache object
*
* @return BagOStuff
*/
function wfGetMainCache() {
global $wgMainCacheType;
return ObjectCache::getInstance( $wgMainCacheType );
}
/**
* Get the cache object used by the message cache
*
* @return BagOStuff
*/
function wfGetMessageCacheStorage() {
global $wgMessageCacheType;
return ObjectCache::getInstance( $wgMessageCacheType );
}
/**
* Get the cache object used by the parser cache
*
* @return BagOStuff
*/
function wfGetParserCacheStorage() {
global $wgParserCacheType;
return ObjectCache::getInstance( $wgParserCacheType );
}
/**
* Call hook functions defined in $wgHooks
*
* @param string $event Event name
* @param array $args Parameters passed to hook functions
* @param string|null $deprecatedVersion Optionally mark hook as deprecated with version number
*
* @return bool True if no handler aborted the hook
* @deprecated 1.25 - use Hooks::run
*/
function wfRunHooks( $event, array $args = array(), $deprecatedVersion = null ) {
return Hooks::run( $event, $args, $deprecatedVersion );
}
/**
* Wrapper around php's unpack.
*
* @param string $format The format string (See php's docs)
* @param string $data A binary string of binary data
* @param int|bool $length The minimum length of $data or false. This is to
* prevent reading beyond the end of $data. false to disable the check.
*
* Also be careful when using this function to read unsigned 32 bit integer
* because php might make it negative.
*
* @throws MWException If $data not long enough, or if unpack fails
* @return array Associative array of the extracted data
*/
function wfUnpack( $format, $data, $length = false ) {
if ( $length !== false ) {
$realLen = strlen( $data );
if ( $realLen < $length ) {
throw new MWException( "Tried to use wfUnpack on a "
. "string of length $realLen, but needed one "
. "of at least length $length."
);
}
}
wfSuppressWarnings();
$result = unpack( $format, $data );
wfRestoreWarnings();
if ( $result === false ) {
// If it cannot extract the packed data.
throw new MWException( "unpack could not unpack binary data" );
}
return $result;
}
/**
* Determine if an image exists on the 'bad image list'.
*
* The format of MediaWiki:Bad_image_list is as follows:
* * Only list items (lines starting with "*") are considered
* * The first link on a line must be a link to a bad image
* * Any subsequent links on the same line are considered to be exceptions,
* i.e. articles where the image may occur inline.
*
* @param string $name The image name to check
* @param Title|bool $contextTitle The page on which the image occurs, if known
* @param string $blacklist Wikitext of a file blacklist
* @return bool
*/
function wfIsBadImage( $name, $contextTitle = false, $blacklist = null ) {
static $badImageCache = null; // based on bad_image_list msg
# Handle redirects
$redirectTitle = RepoGroup::singleton()->checkRedirect( Title::makeTitle( NS_FILE, $name ) );
if ( $redirectTitle ) {
$name = $redirectTitle->getDBkey();
}
# Run the extension hook
$bad = false;
if ( !Hooks::run( 'BadImage', array( $name, &$bad ) ) ) {
return $bad;
}
$cacheable = ( $blacklist === null );
if ( $cacheable && $badImageCache !== null ) {
$badImages = $badImageCache;
} else { // cache miss
if ( $blacklist === null ) {
$blacklist = wfMessage( 'bad_image_list' )->inContentLanguage()->plain(); // site list
}
# Build the list now
$badImages = array();
$lines = explode( "\n", $blacklist );
foreach ( $lines as $line ) {
# List items only
if ( substr( $line, 0, 1 ) !== '*' ) {
continue;
}
# Find all links
$m = array();
if ( !preg_match_all( '/\[\[:?(.*?)\]\]/', $line, $m ) ) {
continue;
}
$exceptions = array();
$imageDBkey = false;
foreach ( $m[1] as $i => $titleText ) {
$title = Title::newFromText( $titleText );
if ( !is_null( $title ) ) {
if ( $i == 0 ) {
$imageDBkey = $title->getDBkey();
} else {
$exceptions[$title->getPrefixedDBkey()] = true;
}
}
}
if ( $imageDBkey !== false ) {
$badImages[$imageDBkey] = $exceptions;
}
}
if ( $cacheable ) {
$badImageCache = $badImages;
}
}
$contextKey = $contextTitle ? $contextTitle->getPrefixedDBkey() : false;
$bad = isset( $badImages[$name] ) && !isset( $badImages[$name][$contextKey] );
return $bad;
}
/**
* Determine whether the client at a given source IP is likely to be able to
* access the wiki via HTTPS.
*
* @param string $ip The IPv4/6 address in the normal human-readable form
* @return bool
*/
function wfCanIPUseHTTPS( $ip ) {
$canDo = true;
Hooks::run( 'CanIPUseHTTPS', array( $ip, &$canDo ) );
return !!$canDo;
}
/**
* Determine input string is represents as infinity
*
* @param string $str The string to determine
* @return bool
* @since 1.25
*/
function wfIsInfinity( $str ) {
$infinityValues = array( 'infinite', 'indefinite', 'infinity', 'never' );
return in_array( $str, $infinityValues );
}
/**
* Work out the IP address based on various globals
* For trusted proxies, use the XFF client IP (first of the chain)
*
* @deprecated since 1.19; call $wgRequest->getIP() directly.
* @return string
*/
function wfGetIP() {
wfDeprecated( __METHOD__, '1.19' );
global $wgRequest;
return $wgRequest->getIP();
}
/**
* Checks if an IP is a trusted proxy provider.
* Useful to tell if X-Forwarded-For data is possibly bogus.
* Squid cache servers for the site are whitelisted.
* @deprecated Since 1.24, use IP::isTrustedProxy()
*
* @param string $ip
* @return bool
*/
function wfIsTrustedProxy( $ip ) {
wfDeprecated( __METHOD__, '1.24' );
return IP::isTrustedProxy( $ip );
}
/**
* Checks if an IP matches a proxy we've configured.
* @deprecated Since 1.24, use IP::isConfiguredProxy()
*
* @param string $ip
* @return bool
* @since 1.23 Supports CIDR ranges in $wgSquidServersNoPurge
*/
function wfIsConfiguredProxy( $ip ) {
wfDeprecated( __METHOD__, '1.24' );
return IP::isConfiguredProxy( $ip );
}
/**
* Returns true if these thumbnail parameters match one that MediaWiki
* requests from file description pages and/or parser output.
*
* $params is considered non-standard if they involve a non-standard
* width or any non-default parameters aside from width and page number.
* The number of possible files with standard parameters is far less than
* that of all combinations; rate-limiting for them can thus be more generious.
*
* @param File $file
* @param array $params
* @return bool
* @since 1.24 Moved from thumb.php to GlobalFunctions in 1.25
*/
function wfThumbIsStandard( File $file, array $params ) {
global $wgThumbLimits, $wgImageLimits, $wgResponsiveImages;
$multipliers = array( 1 );
if ( $wgResponsiveImages ) {
// These available sizes are hardcoded currently elsewhere in MediaWiki.
// @see Linker::processResponsiveImages
$multipliers[] = 1.5;
$multipliers[] = 2;
}
$handler = $file->getHandler();
if ( !$handler || !isset( $params['width'] ) ) {
return false;
}
$basicParams = array();
if ( isset( $params['page'] ) ) {
$basicParams['page'] = $params['page'];
}
$thumbLimits = array();
$imageLimits = array();
// Expand limits to account for multipliers
foreach ( $multipliers as $multiplier ) {
$thumbLimits = array_merge( $thumbLimits, array_map(
function ( $width ) use ( $multiplier ) {
return round( $width * $multiplier );
}, $wgThumbLimits )
);
$imageLimits = array_merge( $imageLimits, array_map(
function ( $pair ) use ( $multiplier ) {
return array(
round( $pair[0] * $multiplier ),
round( $pair[1] * $multiplier ),
);
}, $wgImageLimits )
);
}
// Check if the width matches one of $wgThumbLimits
if ( in_array( $params['width'], $thumbLimits ) ) {
$normalParams = $basicParams + array( 'width' => $params['width'] );
// Append any default values to the map (e.g. "lossy", "lossless", ...)
$handler->normaliseParams( $file, $normalParams );
} else {
// If not, then check if the width matchs one of $wgImageLimits
$match = false;
foreach ( $imageLimits as $pair ) {
$normalParams = $basicParams + array( 'width' => $pair[0], 'height' => $pair[1] );
// Decide whether the thumbnail should be scaled on width or height.
// Also append any default values to the map (e.g. "lossy", "lossless", ...)
$handler->normaliseParams( $file, $normalParams );
// Check if this standard thumbnail size maps to the given width
if ( $normalParams['width'] == $params['width'] ) {
$match = true;
break;
}
}
if ( !$match ) {
return false; // not standard for description pages
}
}
// Check that the given values for non-page, non-width, params are just defaults
foreach ( $params as $key => $value ) {
if ( !isset( $normalParams[$key] ) || $normalParams[$key] != $value ) {
return false;
}
}
return true;
}