diff options
author | Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> | 2013-06-09 14:02:32 -0400 |
---|---|---|
committer | Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> | 2013-06-09 14:31:17 -0400 |
commit | 856323c9cb0ef368367126588d0b43b4846ab0d7 (patch) | |
tree | 98b353da2ca8046a2bf3b1cbce750920caa2f94b | |
parent | 31f7bf1994523f5b8fd014c69b97e09d7043d9ff (diff) |
systemctl: remove extra padding from status output
In 131601349 'systemctl: align all status fields to common column',
padding was calculated for 'ListenStream: ...', etc. Later on in
45a4f7233 'systemctl: tweak output of Listen: fields a bit' output
was changed to 'Listen: ... (stream)', but calculation didn't change.
Just remove the calculation, since now the result will be always 8,
and it it more important to have everything aligned to the widest
field ("Main-PID"), than to save a few columns, usually at most two
(e.g. "Listen").
Note: strlen is more natural, and is optimized to sizeof even
with -O0.
-rw-r--r-- | src/systemctl/systemctl.c | 70 |
1 files changed, 29 insertions, 41 deletions
diff --git a/src/systemctl/systemctl.c b/src/systemctl/systemctl.c index 58a6fd4044..0ba3568a1e 100644 --- a/src/systemctl/systemctl.c +++ b/src/systemctl/systemctl.c @@ -2700,20 +2700,10 @@ static void print_status_info(UnitStatusInfo *i) { on_tty() * OUTPUT_COLOR | !arg_quiet * OUTPUT_WARN_CUTOFF | arg_full * OUTPUT_FULL_WIDTH; - int maxlen = 8; /* a value that'll suffice most of the time */ char **t, **t2; assert(i); - STRV_FOREACH_PAIR(t, t2, i->listen) - maxlen = MAX(maxlen, (int)(sizeof("Listen") - 1 + strlen(*t))); - if (i->accept) - maxlen = MAX(maxlen, (int)sizeof("Accept") - 1); - if (i->main_pid > 0) - maxlen = MAX(maxlen, (int)sizeof("Main PID") - 1); - else if (i->control_pid > 0) - maxlen = MAX(maxlen, (int)sizeof("Control") - 1); - /* This shows pretty information about a unit. See * print_property() for a low-level property printer */ @@ -2725,7 +2715,7 @@ static void print_status_info(UnitStatusInfo *i) { printf("\n"); if (i->following) - printf(" %*s: unit currently follows state of %s\n", maxlen, "Follow", i->following); + printf(" Follow: unit currently follows state of %s\n", i->following); if (streq_ptr(i->load_state, "error")) { on = ansi_highlight_red(true); @@ -2736,17 +2726,17 @@ static void print_status_info(UnitStatusInfo *i) { path = i->source_path ? i->source_path : i->fragment_path; if (i->load_error) - printf(" %*s: %s%s%s (Reason: %s)\n", - maxlen, "Loaded", on, strna(i->load_state), off, i->load_error); + printf(" Loaded: %s%s%s (Reason: %s)\n", + on, strna(i->load_state), off, i->load_error); else if (path && i->unit_file_state) - printf(" %*s: %s%s%s (%s; %s)\n", - maxlen, "Loaded", on, strna(i->load_state), off, path, i->unit_file_state); + printf(" Loaded: %s%s%s (%s; %s)\n", + on, strna(i->load_state), off, path, i->unit_file_state); else if (path) - printf(" %*s: %s%s%s (%s)\n", - maxlen, "Loaded", on, strna(i->load_state), off, path); + printf(" Loaded: %s%s%s (%s)\n", + on, strna(i->load_state), off, path); else - printf(" %*s: %s%s%s\n", - maxlen, "Loaded", on, strna(i->load_state), off); + printf(" Loaded: %s%s%s\n", + on, strna(i->load_state), off); if (!strv_isempty(i->dropin_paths)) { char ** dropin; @@ -2755,7 +2745,7 @@ static void print_status_info(UnitStatusInfo *i) { STRV_FOREACH(dropin, i->dropin_paths) { if (! dir || last) { - printf(" %*s ", maxlen, dir ? "" : "Drop-In:"); + printf(dir ? " " : " Drop-In: "); free(dir); @@ -2764,7 +2754,7 @@ static void print_status_info(UnitStatusInfo *i) { return; } - printf("%s\n %*s %s", dir, maxlen, "", + printf("%s\n %s", dir, draw_special_char(DRAW_TREE_RIGHT)); } @@ -2788,11 +2778,11 @@ static void print_status_info(UnitStatusInfo *i) { on = off = ""; if (ss) - printf(" %*s: %s%s (%s)%s", - maxlen, "Active", on, strna(i->active_state), ss, off); + printf(" Active: %s%s (%s)%s", + on, strna(i->active_state), ss, off); else - printf(" %*s: %s%s%s", - maxlen, "Active", on, strna(i->active_state), off); + printf(" Active: %s%s%s", + on, strna(i->active_state), off); if (!isempty(i->result) && !streq(i->result, "success")) printf(" (Result: %s)", i->result); @@ -2819,26 +2809,26 @@ static void print_status_info(UnitStatusInfo *i) { s2 = format_timestamp(since2, sizeof(since2), i->condition_timestamp); if (s1) - printf(" %*s start condition failed at %s; %s\n", maxlen, "", s2, s1); + printf(" start condition failed at %s; %s\n", s2, s1); else if (s2) - printf(" %*s start condition failed at %s\n", maxlen, "", s2); + printf(" start condition failed at %s\n", s2); } if (i->sysfs_path) - printf(" %*s: %s\n", maxlen, "Device", i->sysfs_path); + printf(" Device: %s\n", i->sysfs_path); if (i->where) - printf(" %*s: %s\n", maxlen, "Where", i->where); + printf(" Where: %s\n", i->where); if (i->what) - printf(" %*s: %s\n", maxlen, "What", i->what); + printf(" What: %s\n", i->what); STRV_FOREACH(t, i->documentation) - printf(" %*s %s\n", maxlen+1, t == i->documentation ? "Docs:" : "", *t); + printf(" %*s %s\n", 9, t == i->documentation ? "Docs:" : "", *t); STRV_FOREACH_PAIR(t, t2, i->listen) - printf(" %*s %s (%s)\n", maxlen+1, t == i->listen ? "Listen:" : "", *t2, *t); + printf(" %*s %s (%s)\n", 9, t == i->listen ? "Listen:" : "", *t2, *t); if (i->accept) - printf(" %*s: %u; Connected: %u\n", maxlen, "Accepted", i->n_accepted, i->n_connections); + printf(" Accepted: %u; Connected: %u\n", i->n_accepted, i->n_connections); LIST_FOREACH(exec, p, i->exec) { _cleanup_free_ char *argv = NULL; @@ -2849,7 +2839,7 @@ static void print_status_info(UnitStatusInfo *i) { continue; argv = strv_join(p->argv, " "); - printf(" %*s: %u %s=%s ", maxlen, "Process", p->pid, p->name, strna(argv)); + printf(" Process: %u %s=%s ", p->pid, p->name, strna(argv)); good = is_clean_exit_lsb(p->code, p->status, NULL); if (!good) { @@ -2886,7 +2876,7 @@ static void print_status_info(UnitStatusInfo *i) { if (i->main_pid > 0 || i->control_pid > 0) { if (i->main_pid > 0) { - printf(" %*s: %u", maxlen, "Main PID", (unsigned) i->main_pid); + printf(" Main PID: %u", (unsigned) i->main_pid); if (i->running) { _cleanup_free_ char *comm = NULL; @@ -2917,7 +2907,7 @@ static void print_status_info(UnitStatusInfo *i) { if (i->control_pid > 0) { _cleanup_free_ char *c = NULL; - printf(" %*s: %u", i->main_pid ? 0 : maxlen, "Control", (unsigned) i->control_pid); + printf(" %8s: %u", i->main_pid ? "" : " Control", (unsigned) i->control_pid); get_process_comm(i->control_pid, &c); if (c) @@ -2928,20 +2918,18 @@ static void print_status_info(UnitStatusInfo *i) { } if (i->status_text) - printf(" %*s: \"%s\"\n", maxlen, "Status", i->status_text); + printf(" Status: \"%s\"\n", i->status_text); if (i->default_control_group && (i->main_pid > 0 || i->control_pid > 0 || cg_is_empty_by_spec(i->default_control_group, false) == 0)) { unsigned c; - printf(" %*s: %s\n", maxlen, "CGroup", i->default_control_group); + printf(" CGroup: %s\n", i->default_control_group); if (arg_transport != TRANSPORT_SSH) { unsigned k = 0; pid_t extra[2]; - char prefix[maxlen + 4]; - memset(prefix, ' ', sizeof(prefix) - 1); - prefix[sizeof(prefix) - 1] = '\0'; + char prefix[] = " "; c = columns(); if (c > sizeof(prefix) - 1) |