summaryrefslogtreecommitdiff
path: root/NEWS
diff options
context:
space:
mode:
authorLennart Poettering <lennart@poettering.net>2014-02-18 02:51:39 +0100
committerLennart Poettering <lennart@poettering.net>2014-02-18 02:51:47 +0100
commite49b5aada0df13c9e8fce7338ae34e075dd7ccd1 (patch)
tree132bdd1a60b3e683dac4e0de08f13ade991bd719 /NEWS
parent9f5650aecb22a1d864b2c0b749910556795f1490 (diff)
prepare NEWS
Diffstat (limited to 'NEWS')
-rw-r--r--NEWS432
1 files changed, 432 insertions, 0 deletions
diff --git a/NEWS b/NEWS
index 557774dc1f..49e2dad91d 100644
--- a/NEWS
+++ b/NEWS
@@ -1,5 +1,437 @@
systemd System and Service Manager
+CHANGES WITH 209:
+
+ * A new component "systemd-networkd" has been added that can
+ be used to configure local network interfaces statically or
+ via DHCP. It is capable up bridges, VLANs and bonding. This
+ currently provides no hookups for interactive network
+ configuration. Use this for your initrd, container, embedded
+ or server setup, if you need a simple, yet powerful network
+ configuration solution. This configuration subsystem is
+ quite nifty as it allows wildcard hotplug matching in
+ interfaces. For example, with a single configuration snippet
+ you can configure that all ethernet interfaces showing up
+ are automatically added to a bridge, or similar. It
+ optionally supports link-sensing and more.
+
+ * A new tool "systemd-socket-proxyd" has been added which can
+ acts as a bidirectional proxy for TCP sockets. This is
+ useful for adding socket activation support to services that
+ do not actually support socket activation, including virtual
+ machines and suchlike.
+
+ * Add a new tool to save/restore rfkill state on
+ shutdown/boot.
+
+ * Save/restore state of kbd backlights in addition to display
+ backlights on shutdown/boot.
+
+ * udev learned a new SECLABEL{} construct to label device
+ nodes with a specific security label when they appear. For
+ now only SECLABEL{selinux} is supported, but the syntax is
+ prepared for additional security frameworks.
+
+ * udev gained a new scheme to configure link-level attributes
+ from files in /etc/systemd/network/*.link. These files can
+ match against MAC address, device path, driver name and type
+ and will apply attributes like the naming policy, link speed
+ MTU, duplex settings, WakeOnLan settings, MAC address, MAC
+ address assignment policy (randomized, ...).
+
+ * When the User= switch is used in a unit file, also
+ initialize $SHELL= based on user database.
+
+ * systemd no longer depends on libdbus. All communication is
+ now done with sd-bus, systemd's low-level bus library
+ implementation.
+
+ * kdbus support has been added to PID 1 itself. When kdbus is
+ enabled this causes PID 1 to set up the system bus, and
+ enable support for a new ".busname" unit type that
+ encapsulates bus name activation on kdbus. It works a little
+ bit like ".socket" units, except for bus names. A new
+ generator has been added that converts classic dbus1 service
+ activation files automatically into native systemd .busname
+ and .service units.
+
+ * sd-bus: add a light-weight vtable implementation that allows
+ defining objects on the bus with a simple static const
+ vtable array of its methods, signals and properties.
+
+ * systemd will not generate nor install static dbus
+ introspection data anymore to /usr/share/dbus-1/interfaces,
+ as the precise format of these files are unclear, and
+ nothing makes use of it.
+
+ * A proxy daemon is now provided to proxy clients connecting
+ via classic D-Bus AF_UNIX sockets to kdbus, to provide full
+ compatibility with classic D-Bus.
+
+ * A bus driver implementation has been added that supports the
+ classic D-Bus bus driver calls on kdbus, also for
+ compatibility purposes.
+
+ * A new API "sd-event.h" has been added that implements a
+ minimal event loop API built around epoll. It provides a
+ couple of features that direct epoll usage is lacking:
+ priorization of events, scales to large numbers of timer
+ events, per-event timer slack (accuracy), system-wide
+ coalescing of timer events, exit handlers, watchdog
+ supervision support using systemd's sd_notify() API, child
+ process handling.
+
+ * A new API "sd-rntl.h" has been added that provides an API
+ around the route netlink interface of the kernel, similar in
+ style to "sd-bus.h".
+
+ * A new API "sd-dhcp.h" has been added that provides a small
+ DHCPv4 client side implementation. This is used by
+ "systemd-networkd".
+
+ * There's a new kernel command line option
+ "systemd.restore_state". When set none of the systemd tools
+ will restore saved runtime state to hardware devices. More
+ specifically, the rfkill and backlight states are not
+ restored.
+
+ * The FsckPassNo= compatibility option in mount/service units
+ has been removed. The fstab generator will now add the
+ necessary dependencies automatically, and does not require
+ PID1's support for that anymore.
+
+ * journalctl gained a new switch --list-boots, that lists
+ recent boots with their times and boot IDs.
+
+ * The various tools like systemctl, loginctl, timedatectl,
+ busctl, systemd-run, ... have gained a new switch "-M" to
+ connect to a specific, local OS container (as direct
+ connection, without requiring SSH). This works on any
+ container that is registered with machined, such as those
+ created by libvirt-lxc or nspawn.
+
+ * systemd-run and systemd-analyze also gained support for "-H"
+ to connect to remote hosts via SSH. This is particular
+ useful for systemd-run since it enables queuing of jobs onto
+ remote systems.
+
+ * machinectl gained a new command "login" to open a getty
+ login in any local container. This works with any container
+ that is registered with machined (such as those created by
+ libvirt-lxc or nspawn), and which run systemd inside.
+
+ * machinectl gained a new "reboot" command that may be used to
+ trigger a reboot on a specific container that is registered
+ with machined. This works on any container that runs an init
+ system of some kind.
+
+ * systemctl gained a new "list-timers" command to print a nice
+ listing of installed timer units with the times they elapse
+ next.
+
+ * Alternative reboot() parameters may now be specified on the
+ "systemctl reboot" command line and are passed to the
+ reboot() system call.
+
+ * systemctl gained a new --job-mode= switch to configure the
+ mode to queue a job with. This is a more generic version of
+ --fail, --irreversible, --ignore-dependencies which are
+ still available but not advertised anymore.
+
+ * systemd-activate gained a new --setenv= parameter to specify
+ additional environment variables to pass to the executed
+ program.
+
+ * /etc/systemd/system.conf gained new settings to configure
+ various default timeouts of units, as well as the default
+ start limit interval and burst. These may still be overriden
+ within each Unit.
+
+ * PID1 will now export profile data of security policy
+ uploading (such as SELinux policy upload to the kernel)
+ over.
+
+ * journald: when forwarding logs to the console include
+ timestamps.
+
+ * OnCalendar= in timer units now understands the special
+ strings "yearly" and "annually". (Both are equivalent)
+
+ * The accuracy of timer units is now configurable with the new
+ AccuracySec= setting. It defaults to 1min.
+
+ * A new dependency type JoinsNamespaceOf= has been added that
+ allows running two services within the same /tmp and network
+ namespace, if PrivateNetwork= or PrivateTmp= are used.
+
+ * A new command "cat" has been added to systemctl. It outputs
+ the original unit file of a unit, and concatenates the
+ contents of addition "drop-in" unit file snippets to it, so
+ that the full configuration is shown.
+
+ * systemctl now supports globbing on the various "list-xyz"
+ commands, like "list-units" or "list-sockets", as well as on
+ thsoe commands which take multiple unit names.
+
+ * All systemd daemons now make use of the watchdog logic so
+ that systemd automatically notices when they hang.
+
+ * If the $container_ttys environment variable is set
+ getty-generator will automatically spawn a getty for each
+ listed tty. This is useful for container managers to request
+ login gettys to be spawned on as many ttys as needed.
+
+ * %h, %s, %U specifier support is not available anymore when
+ used in unit files for PID 1. This is because NSS calls are
+ not safe from PID 1. They stay available for --user
+ instances of systemd, and as special case for the root user.
+
+ * When the kernel command line argument "kdbus" is specified
+ systemd will automatically load the kdbus kernel
+ module. This is useful for testing kdbus without having to
+ turn it on unconditionally.
+
+ * loginctl gained a new "--no-legend" switch to turn off output
+ of the legend text.
+
+ * The "sd-login.h" API gained three new calls:
+ sd_session_is_remote(), sd_session_get_remote_user(),
+ sd_session_get_remote_host() to query information about
+ remote sessions.
+
+ * The udev device database now also carries vendor/product
+ information about SDIO devices.
+
+ * The "sd-daemon.h" API gained a new sd_watchdog_enabled() to
+ determine whether watchdog notifications are requested by
+ the system manager.
+
+ * "systemd-delta" will now also display changes made via .d/
+ drop-ins for unit files.
+
+ * Socket-activated per-connection services will now include a
+ short description of the connection parameters in the
+ description.
+
+ * tmpfiles gained a new "--boot" option. When this is not used
+ only lines where the command character is not suffixed with
+ "!" are executed. When this option is specified those
+ options are executed too. This is useful to ensure that
+ specific lines are not executed by accident during runtime,
+ and only at boot (for example, a line that creates
+ /run/nologin).
+
+ * A new API "sd-resolv.h" has been added, that provides a
+ simple asynchronous around glibc NSS host name resolution
+ calls, such as getaddrinfo(). In contrast to glibc's
+ getaddrinfo_a() it does not use signals. In contrast to most
+ other asynchronous name resolution libraries this one does
+ not not reimplement DNS, but reused NSS, so that alternative
+ host name resolution systems continue to work, such as mDNS,
+ LDAP, ... This API is based on libasyncns, but has been
+ cleaned up for inclusion in systemd.
+
+ * journalctl's --unit= switch gained support for globbing.
+
+ * The APIs "sd-journal.h", "sd-login.h", "sd-id128.h" are no
+ longer found in individual libraries libsystemd-journal.so,
+ libsystemd-login.so, libsystemd-id128.so. Instead we have
+ merged them into a single library libsystemd.so which
+ provides all symbols. The reason for this are cyclic
+ dependencies, as these libraries tend to use each other's
+ symbols. So far we maneged to work-around that by linking a
+ copy of a good part of our code into each of these libraries
+ again and again, which however makes certain things hard to
+ do, like sharing static variables. Also, it substantially
+ increases footprint. With this change there's only one
+ library for the basic APIs systemd provides. Also,
+ "sd-bus.h", "sd-memfd.h", "sd-event.h", "sd-rtnl.h",
+ "sd-resolve.h", "sd-utf8.h" are found in this library as
+ well, however are subject to the --enable-kdbus switch (see
+ below). Note that "sd-dhcp.h" and "sd-daemon.h" are not part
+ of this libraries (the former because it only consumes,
+ never provides services of/to other APIs, and the latter
+ because it is completely standalone). To make the transition
+ from the separate libraries to the unified one easy we
+ provide the --enable-compat-libs compile time switch which
+ will generate stub libraries that are compatible with the
+ old ones but redirect all calls to the new one.
+
+ * All the kdbus logic and the new APIs "sd-bus.h",
+ "sd-memfd.h", "sd-event.h", "sd-rtnl.h", "sd-resolve.h",
+ "sd-utf8.h" is compile-time optional, via the
+ "--enable-kdbus" switch and is not compiled in by
+ default. To make use of you have to explicitly enable the
+ switch. Note however, that neither the kernel nor the
+ userspace API for all of this is considered stable yet. We
+ want to maintain the freedom to still change the APIs for
+ now. By specifying this build-time switch you acknowledge
+ that you are aware of the instability of the current
+ APIs. Also, note that while kdbus is pretty much complete,
+ it lacks one thing: proper policy support. This means you
+ can build a fully working system with all features, however
+ it will be highly insecure. Policy will be added in one of
+ the next releases, at the same time as we will declare the
+ APIs stable.
+
+ * systemctl gained a new "import-environment" command which
+ uploads the callers environment (or parts thereof) into the
+ service manager so that it is inherited by services started
+ by the manager. This is useful to upload variables like
+ $DISPLAY into the user service manager.
+
+ * A new PrivateDevices= switch has been added to service units
+ which allows running a service with a namespaced /dev
+ directory that does not contain any device nodes for
+ physical devices. More specifically it only includes devices
+ such as /dev/null, /dev/urandom and /dev/zero which are API
+ entry points.
+
+ * logind has been extended to support behaviour like VT
+ switching on seats that do not support a VT. This makes
+ multi-session available on seats that are not the first seat
+ (seat0), and on systems where kernel support for VTs has
+ been disabled at compile time.
+
+ * If a process holds a delay lock for system sleep or shutdown
+ and fails to release it in time we will now log about its
+ identity. This makes it easier to identify processes that
+ cause slow suspends or power-offs.
+
+ * When parsing /etc/crypttab, support a new key-slot= option
+ as supported by Debian, which allows indicating which LUKS
+ slot to use on disk.
+
+ * The boot-time has been improved to show information about
+ timeouts that are expiring as they are expiring.
+
+ * The sd_journald_sendv() API call has been updated to be
+ async-signal-safe so that it may be invoked from signal
+ handlers for logging purposes.
+
+ * Boot-time status output is now enabled automatically after a
+ short timeout if boot does not progress, in order to give
+ the user an indication what he is waiting for.
+
+ * The KillMode= switch in service units gained a new possible
+ value "mixed". If set and the unit is shutdown then the
+ initial SIGTERM signal is sent only to the main daemon
+ process, while the following SIGKILL signal is then sent to
+ all remaining processes of the service.
+
+ * When a scope unit is registered a new property "Controller"
+ may be set. If set to a valid bus name systemd will send a
+ RequestStop() signal to this name when it would like to shut
+ down the scope. This may be used to hook manager logic into
+ the shutdown logic of scope units. Also, scope units may now
+ be put in a special "abandoned" state in which case the
+ manager process which created them takes no further
+ responsibilities for it.
+
+ * When reading unit files systemd will now implicitly verify
+ the access mode of these files, and warn about certain
+ suspicious combinations. This has been added to make it
+ easier to track down packaging bugs where unit files are
+ marked executable or world-writable.
+
+ * systemd-nspawn gained a new "--setenv=" switch to set
+ container-wide environment variables.
+
+ * systemd-nspawn has been updated to create a new kdbus domain
+ for each container that is invoked, thus allowing each
+ container to have its own set of system and user busses,
+ independently of the host.
+
+ * systemd-nspawn gained a new --drop-capability= switch to run
+ the container with less capabilities than the default. Both
+ --drop-capability= and --capability= now take the specia
+ string "all" for dropping or keeping all capabilities.
+
+ * systemd-nspawn gained new switches for executing containers
+ with specific SELinux labels set.
+
+ * systemd-nspawn gained a new --quiet switch to not generate
+ any additional output but the container's own console
+ output.
+
+ * systemd-nspawn gained a new --share-system switch to run a
+ container without PID namespacing enabled.
+
+ * systemd-nspawn gained a new --register= switch to control
+ whether the container is registered with machined or
+ not. This is useful for containers that do not register full
+ OS images, but only specific apps.
+
+ * systemd-nspawn gained a new --keep-unit which may be used
+ when invoked as only program from a service unit, and
+ results in registration of the unit service itself in
+ machined, instead of a newly opened scope unit.
+
+ * systemd-nspawn gained a new --network-interface= switch for
+ moving arbitrary interfaces to the container. The new
+ --network-veth switch creates a virtual ethernet connection
+ between host and container. Thew new --network-bridge=
+ switch then additionally allows assigning the host side of
+ this virtual ethernet connection to a bridge device.
+
+ * logind will now also track a "Desktop" identifier for each
+ session which encodes the desktop environment of it. This is
+ useful for desktop environments that want to identify
+ multiple running sessions of itself easily.
+
+ * A new SELinuxContext= setting for service units has been
+ added that allows setting a specific SELinux execution
+ context for a service.
+
+ * Most systemd client tools will now honour $SYSTEMD_LESS for
+ settings of the "less" pager. By default, these tools will
+ override $LESS to allow certain operations like
+ jump-to-the-end work. With $SYSTEMD_LESS it is possible to
+ influence this logic.
+
+ * systemd's "seccomp" hook-up has been changed to make use of
+ the libseccomp library instead of using its own
+ implementation. This has benefits for portability among
+ other things.
+
+ * For usage together with SystemCallFilter= a new
+ SystemCallErrorNumber= setting has been introduce that
+ allows configuration if a system error number to return on
+ filtered syscalls, instead of immediately killing the
+ process. Also, SystemCallArchitectures= has been added to
+ limit access to system calls of a particular architecture
+ (in order to turn off support for unused secondary
+ architectures). There's also a global
+ SystemcallArchitecture= setting in system.conf now to turn
+ off support for non-native system calls system-wide.
+
+ Contributions from: Adam Williamson, Alex Jia, Anatol Pomozov,
+ Ansgar Burchardt, AppleBloom, Auke Kok, Bastien Nocera,
+ Chengwei Yang, Christian Seiler, Colin Guthrie, Colin Walters,
+ Cristian Rodríguez, Daniel Buch, Daniele Medri, Daniel J
+ Walsh, Daniel Mack, Dan McGee, Dave Reisner, David Coppa,
+ David Herrmann, David Strauss, Djalal Harouni, Dmitry Pisklov,
+ Elia Pinto, Florian Weimer, George McCollister, Goffredo
+ Baroncelli, Greg Kroah-Hartman, Hendrik Brueckner, Igor
+ Zhbanov, Jan Engelhardt, Jan Janssen, Jason A. Donenfeld,
+ Jason St. John, Jasper St. Pierre, Jóhann B. Guðmundsson, Jose
+ Ignacio Naranjo, Karel Zak, Kay Sievers, Kristian Høgsberg,
+ Lennart Poettering, Lubomir Rintel, Lukas Nykryn, Lukasz
+ Skalski, Łukasz Stelmach, Luke Shumaker, Mantas Mikulėnas,
+ Marc-Antoine Perennou, Marcel Holtmann, Marcos Felipe Rasia de
+ Mello, Marko Myllynen, Martin Pitt, Matthew Monaco, Michael
+ Marineau, Michael Scherer, Michał Górny, Michal Sekletar,
+ Michele Curti, Oleksii Shevchuk, Olivier Brunel, Patrik Flykt,
+ Pavel Holica, Raudi, Richard Marko, Ronny Chevalier, Sébastien
+ Luttringer, Sergey Ptashnick, Shawn Landden, Simon Peeters,
+ Stefan Beller, Susant Sahani, Sylvain Plantefeve, Sylvia Else,
+ Tero Roponen, Thomas Bächler, Thomas Hindoe Paaboel Andersen,
+ Tom Gundersen, Umut Tezduyar Lindskog, Unai Uribarri, Václav
+ Pavlín, Vincent Batts, WaLyong Cho, William Giokas, Yang
+ Zhiyong, Yin Kangkai, Yuxuan Shui, Zbigniew Jędrzejewski-Szmek
+
+ -- Berlin, 2014-02-xx
+
CHANGES WITH 208:
* logind has gained support for facilitating privileged input