[PATCH] Added multipath-tools 0.1.1 release

1 files changed, 162 insertions, 0 deletions

diff --git a/extras/multipath-tools/multipath/sg_err.h b/extras/multipath-tools/multipath/sg_err.h
new file mode 100644
index 0000000000..ef57b5ce38
--- /dev/null
+++ b/extras/multipath-tools/multipath/sg_err.h
@@ -0,0 +1,162 @@
+#ifndef SG_ERR_H
+#define SG_ERR_H
+
+/* Feel free to copy and modify this GPL-ed code into your applications. */
+
+/* Version 0.90 (20030519) 
+*/
+
+
+/* Some of the following error/status codes are exchanged between the
+   various layers of the SCSI sub-system in Linux and should never
+   reach the user. They are placed here for completeness. What appears
+   here is copied from drivers/scsi/scsi.h which is not visible in
+   the user space. */
+
+#ifndef SCSI_CHECK_CONDITION
+/* Following are the "true" SCSI status codes. Linux has traditionally
+   used a 1 bit right and masked version of these. So now CHECK_CONDITION
+   and friends (in <scsi/scsi.h>) are deprecated. */
+#define SCSI_CHECK_CONDITION 0x2
+#define SCSI_CONDITION_MET 0x4
+#define SCSI_BUSY 0x8
+#define SCSI_IMMEDIATE 0x10
+#define SCSI_IMMEDIATE_CONDITION_MET 0x14
+#define SCSI_RESERVATION_CONFLICT 0x18
+#define SCSI_COMMAND_TERMINATED 0x22
+#define SCSI_TASK_SET_FULL 0x28
+#define SCSI_ACA_ACTIVE 0x30
+#define SCSI_TASK_ABORTED 0x40
+#endif
+
+/* The following are 'host_status' codes */
+#ifndef DID_OK
+#define DID_OK 0x00
+#endif
+#ifndef DID_NO_CONNECT
+#define DID_NO_CONNECT 0x01     /* Unable to connect before timeout */
+#define DID_BUS_BUSY 0x02       /* Bus remain busy until timeout */
+#define DID_TIME_OUT 0x03       /* Timed out for some other reason */
+#define DID_BAD_TARGET 0x04     /* Bad target (id?) */
+#define DID_ABORT 0x05          /* Told to abort for some other reason */
+#define DID_PARITY 0x06         /* Parity error (on SCSI bus) */
+#define DID_ERROR 0x07          /* Internal error */
+#define DID_RESET 0x08          /* Reset by somebody */
+#define DID_BAD_INTR 0x09       /* Received an unexpected interrupt */
+#define DID_PASSTHROUGH 0x0a    /* Force command past mid-level */
+#define DID_SOFT_ERROR 0x0b     /* The low-level driver wants a retry */
+#endif
+
+/* These defines are to isolate applictaions from kernel define changes */
+#define SG_ERR_DID_OK           DID_OK
+#define SG_ERR_DID_NO_CONNECT   DID_NO_CONNECT
+#define SG_ERR_DID_BUS_BUSY     DID_BUS_BUSY
+#define SG_ERR_DID_TIME_OUT     DID_TIME_OUT
+#define SG_ERR_DID_BAD_TARGET   DID_BAD_TARGET
+#define SG_ERR_DID_ABORT        DID_ABORT
+#define SG_ERR_DID_PARITY       DID_PARITY
+#define SG_ERR_DID_ERROR        DID_ERROR
+#define SG_ERR_DID_RESET        DID_RESET
+#define SG_ERR_DID_BAD_INTR     DID_BAD_INTR
+#define SG_ERR_DID_PASSTHROUGH  DID_PASSTHROUGH
+#define SG_ERR_DID_SOFT_ERROR   DID_SOFT_ERROR
+
+/* The following are 'driver_status' codes */
+#ifndef DRIVER_OK
+#define DRIVER_OK 0x00
+#endif
+#ifndef DRIVER_BUSY
+#define DRIVER_BUSY 0x01
+#define DRIVER_SOFT 0x02
+#define DRIVER_MEDIA 0x03
+#define DRIVER_ERROR 0x04
+#define DRIVER_INVALID 0x05
+#define DRIVER_TIMEOUT 0x06
+#define DRIVER_HARD 0x07
+#define DRIVER_SENSE 0x08       /* Sense_buffer has been set */
+
+/* Following "suggests" are "or-ed" with one of previous 8 entries */
+#define SUGGEST_RETRY 0x10
+#define SUGGEST_ABORT 0x20
+#define SUGGEST_REMAP 0x30
+#define SUGGEST_DIE 0x40
+#define SUGGEST_SENSE 0x80
+#define SUGGEST_IS_OK 0xff
+#endif
+#ifndef DRIVER_MASK
+#define DRIVER_MASK 0x0f
+#endif
+#ifndef SUGGEST_MASK
+#define SUGGEST_MASK 0xf0
+#endif
+
+/* These defines are to isolate applictaions from kernel define changes */
+#define SG_ERR_DRIVER_OK        DRIVER_OK
+#define SG_ERR_DRIVER_BUSY      DRIVER_BUSY
+#define SG_ERR_DRIVER_SOFT      DRIVER_SOFT
+#define SG_ERR_DRIVER_MEDIA     DRIVER_MEDIA
+#define SG_ERR_DRIVER_ERROR     DRIVER_ERROR
+#define SG_ERR_DRIVER_INVALID   DRIVER_INVALID
+#define SG_ERR_DRIVER_TIMEOUT   DRIVER_TIMEOUT
+#define SG_ERR_DRIVER_HARD      DRIVER_HARD
+#define SG_ERR_DRIVER_SENSE     DRIVER_SENSE
+#define SG_ERR_SUGGEST_RETRY    SUGGEST_RETRY
+#define SG_ERR_SUGGEST_ABORT    SUGGEST_ABORT
+#define SG_ERR_SUGGEST_REMAP    SUGGEST_REMAP
+#define SG_ERR_SUGGEST_DIE      SUGGEST_DIE
+#define SG_ERR_SUGGEST_SENSE    SUGGEST_SENSE
+#define SG_ERR_SUGGEST_IS_OK    SUGGEST_IS_OK
+#define SG_ERR_DRIVER_MASK      DRIVER_MASK
+#define SG_ERR_SUGGEST_MASK     SUGGEST_MASK
+
+
+
+/* The following "print" functions send ACSII to stdout */
+extern void sg_print_command(const unsigned char * command);
+extern void sg_print_sense(const char * leadin,
+                           const unsigned char * sense_buffer, int sb_len);
+extern void sg_print_status(int masked_status);
+extern void sg_print_scsi_status(int scsi_status);
+extern void sg_print_host_status(int host_status);
+extern void sg_print_driver_status(int driver_status);
+
+/* sg_chk_n_print() returns 1 quietly if there are no errors/warnings
+   else it prints to standard output and returns 0. */
+extern int sg_chk_n_print(const char * leadin, int masked_status,
+                          int host_status, int driver_status,
+                          const unsigned char * sense_buffer, int sb_len);
+
+/* The following function declaration is for the sg version 3 driver. 
+   Only version 3 sg_err.c defines it. */
+struct sg_io_hdr;
+extern int sg_chk_n_print3(const char * leadin, struct sg_io_hdr * hp);
+
+
+/* The following "category" function returns one of the following */
+#define SG_ERR_CAT_CLEAN 0      /* No errors or other information */
+#define SG_ERR_CAT_MEDIA_CHANGED 1 /* interpreted from sense buffer */
+#define SG_ERR_CAT_RESET 2      /* interpreted from sense buffer */
+#define SG_ERR_CAT_TIMEOUT 3
+#define SG_ERR_CAT_RECOVERED 4  /* Successful command after recovered err */
+#define SG_ERR_CAT_SENSE 98     /* Something else is in the sense buffer */
+#define SG_ERR_CAT_OTHER 99     /* Some other error/warning has occurred */
+
+extern int sg_err_category(int masked_status, int host_status,
+               int driver_status, const unsigned char * sense_buffer,
+               int sb_len);
+
+extern int sg_err_category_new(int scsi_status, int host_status,
+               int driver_status, const unsigned char * sense_buffer,
+               int sb_len);
+
+/* The following function declaration is for the sg version 3 driver. 
+   Only version 3 sg_err.c defines it. */
+extern int sg_err_category3(struct sg_io_hdr * hp);
+
+/* Returns length of SCSI command given the opcode (first byte) */
+extern int sg_get_command_size(unsigned char opcode);
+
+extern void sg_get_command_name(unsigned char opcode, int buff_len, 
+                                char * buff);
+
+#endif