doc: correct punctuation and improve typography in documentation

1 files changed, 19 insertions, 19 deletions

diff --git a/man/systemd.network.xml b/man/systemd.network.xml
index 86a430682c..d649b2c567 100644
--- a/man/systemd.network.xml
+++ b/man/systemd.network.xml
@@ -77,7 +77,7 @@
     name in <filename>/usr/lib</filename>. This can be used to
     override a system-supplied configuration file with a local file if
     needed. As a special case, an empty file (file size 0) or symlink
-    with the same name pointing to <filename>/dev/null</filename>,
+    with the same name pointing to <filename>/dev/null</filename>
     disable the configuration file entirely (it is "masked").</para>
   </refsect1>
 
@@ -227,7 +227,7 @@
             <literal>yes</literal>, <literal>no</literal>,
             <literal>ipv4</literal>, or <literal>ipv6</literal>.</para>
 
-            <para>Please note that by default the domain name
+            <para>Please note that, by default, the domain name
             specified through DHCP is not used for name resolution.
             See option <option>UseDomains=</option> below.</para>
           </listitem>
@@ -263,7 +263,7 @@
           <term><varname>IPv6Token=</varname></term>
           <listitem>
             <para>An IPv6 address with the top 64 bits unset. When set, indicates the
-            64 bits interface part of SLAAC IPv6 addresses for this link. By default
+            64 bits interface part of SLAAC IPv6 addresses for this link. By default,
             it is autogenerated.</para>
           </listitem>
         </varlistentry>
@@ -271,8 +271,8 @@
           <term><varname>LLMNR=</varname></term>
           <listitem>
             <para>A boolean or <literal>resolve</literal>. When true, enables
-            Link-Local Multicast Name Resolution on the link, when set to
-            <literal>resolve</literal> only resolution is enabled, but not
+            Link-Local Multicast Name Resolution on the link. When set to
+            <literal>resolve</literal>, only resolution is enabled, but not
             announcement. Defaults to true.</para>
           </listitem>
         </varlistentry>
@@ -357,7 +357,7 @@
         <varlistentry>
           <term><varname>IPForward=</varname></term>
           <listitem><para>Configures IP forwarding for the network
-          interface. If enabled incoming packets on the network
+          interface. If enabled, incoming packets on the network
           interface will be forwarded to other interfaces according to
           the routing table. Takes either a boolean argument, or the
           values <literal>ipv4</literal> or <literal>ipv6</literal>,
@@ -384,7 +384,7 @@
         <varlistentry>
           <term><varname>IPMasquerade=</varname></term>
           <listitem><para>Configures IP masquerading for the network
-          interface. If enabled packets forwarded from the network
+          interface. If enabled, packets forwarded from the network
           interface will be appear as coming from the local host.
           Takes a boolean argument. Implies
           <varname>IPForward=ipv4</varname>. Defaults to
@@ -398,12 +398,12 @@
           Privacy Extensions for Stateless Address Autoconfiguration
           in IPv6). Takes a boolean or the special values
           <literal>prefer-public</literal> and
-          <literal>kernel</literal>. When true enables the privacy
+          <literal>kernel</literal>. When true, enables the privacy
           extensions and prefers temporary addresses over public
-          addresses. When <literal>prefer-public</literal> enables the
+          addresses. When <literal>prefer-public</literal>, enables the
           privacy extensions, but prefers public addresses over
           temporary addresses. When false, the privacy extensions
-          remain disabled. When <literal>kernel</literal> the kernel's
+          remain disabled. When <literal>kernel</literal>, the kernel's
           default setting will be left in place.  Defaults to
           <literal>no</literal>.</para></listitem>
         </varlistentry>
@@ -535,7 +535,7 @@
           <term><varname>Destination=</varname></term>
           <listitem>
             <para>The destination prefix of the route. Possibly
-            followed by a slash and the prefixlength. If omitted, a
+            followed by a slash and the prefix length. If omitted, a
             full-length host route is assumed.</para>
           </listitem>
         </varlistentry>
@@ -543,14 +543,14 @@
           <term><varname>Source=</varname></term>
           <listitem>
             <para>The source prefix of the route. Possibly followed by
-            a slash and the prefixlength. If omitted, a full-length
+            a slash and the prefix length. If omitted, a full-length
             host route is assumed.</para>
           </listitem>
         </varlistentry>
         <varlistentry>
           <term><varname>Metric=</varname></term>
           <listitem>
-            <para>The metric of the route. An unsigned integer</para>
+            <para>The metric of the route (an unsigned integer).</para>
           </listitem>
         </varlistentry>
         <varlistentry>
@@ -725,7 +725,7 @@
         address. <varname>PoolOffset=</varname> takes the offset of the pool
         from the start of subnet, or zero to use the default value.
         <varname>PoolSize=</varname> takes the number of IP addresses in the
-        pool or zero to use the default value. By default the pool starts at
+        pool or zero to use the default value. By default, the pool starts at
         the first address after the subnet address and takes up the rest of
         the subnet, excluding the broadcast address. If the pool includes
         the server address (the default), this is reserved and not handed
@@ -741,7 +741,7 @@
         another common time unit, depending on the suffix. The default
         lease time is used for clients that did not ask for a specific
         lease time. If a client asks for a lease time longer than the
-        maximum lease time it is automatically shortened to the
+        maximum lease time, it is automatically shortened to the
         specified time. The default lease time defaults to 1h, the
         maximum lease time to 12h. Shorter lease times are beneficial
         if the configuration data in DHCP leases changes frequently
@@ -761,7 +761,7 @@
         pass to clients may be configured with the
         <varname>DNS=</varname> option, which takes a list of IPv4
         addresses. If the <varname>EmitDNS=</varname> option is
-        enabled but no servers configured the servers are
+        enabled but no servers configured, the servers are
         automatically propagated from an "uplink" interface that has
         appropriate servers set. The "uplink" interface is determined
         by the default route of the system with the highest
@@ -772,7 +772,7 @@
         <filename>/etc/resolv.conf</filename> into account. Also, note
         that the leases are not refreshed if uplink network
         configuration changes. To ensure clients regularly acquire the
-        most current uplink DNS server information it is thus
+        most current uplink DNS server information, it is thus
         advisable to shorten the DHCP lease time via
         <varname>MaxLeaseTimeSec=</varname> described
         above.</para></listitem>
@@ -783,7 +783,7 @@
         <term><varname>NTP=</varname></term>
 
         <listitem><para>Similar to the <varname>EmitDNS=</varname> and
-        <varname>DNS=</varname> settings described above these
+        <varname>DNS=</varname> settings described above, these
         settings configure whether and what NTP server information
         shall be emitted as part of the DHCP lease. The same syntax,
         propagation semantics and defaults apply as for
@@ -802,7 +802,7 @@
         <varname>Timezone=</varname> setting takes a timezone string
         (such as <literal>Europe/Berlin</literal> or
         <literal>UTC</literal>) to pass to clients. If no explicit
-        timezone is set the system timezone of the local host is
+        timezone is set, the system timezone of the local host is
         propagated, as determined by the
         <filename>/etc/localtime</filename> symlink.</para></listitem>
       </varlistentry>