diff options
| author | Lukas Nykryn <lnykryn@redhat.com> | 2013-08-28 15:46:59 +0200 |
|---|---|---|
| committer | Lennart Poettering <lennart@poettering.net> | 2013-09-10 17:01:49 +0200 |
| commit | 27722f964361a7da2532cf0a2d57a2f0dd0a09f2 (patch) | |
| tree | 452e8c0b2ee924af38f2166aec9ce91c29fc2967 /man | |
| parent | 9285c9ff263d90439810735ddca074b4b4193f05 (diff) | |
man: split systemctl commands to sections
Diffstat (limited to 'man')
| -rw-r--r-- | man/systemctl.xml | 1428 |
1 files changed, 736 insertions, 692 deletions
diff --git a/man/systemctl.xml b/man/systemctl.xml index 49f22ca0b5..1642a47273 100644 --- a/man/systemctl.xml +++ b/man/systemctl.xml @@ -503,25 +503,28 @@ along with systemd; If not, see <http://www.gnu.org/licenses/>. <para>The following commands are understood:</para> - <variablelist> - <varlistentry> - <term><command>list-units</command></term> + <refsect2> + <title>Unit Commands</title> - <listitem> - <para>List known units (subject to limitations specified - with <option>-t</option>).</para> + <variablelist> + <varlistentry> + <term><command>list-units</command></term> - <para>This is the default command.</para> - </listitem> - </varlistentry> + <listitem> + <para>List known units (subject to limitations specified + with <option>-t</option>).</para> - <varlistentry> - <term><command>list-sockets</command></term> + <para>This is the default command.</para> + </listitem> + </varlistentry> - <listitem> - <para>List socket units ordered by the listening address. Produces output - similar to - <programlisting> + <varlistentry> + <term><command>list-sockets</command></term> + + <listitem> + <para>List socket units ordered by the listening address. Produces output + similar to + <programlisting> LISTEN UNIT ACTIVATES /dev/initctl systemd-initctl.socket systemd-initctl.service ... @@ -529,683 +532,724 @@ LISTEN UNIT ACTIVATES kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service 5 sockets listed. - </programlisting> - Note: because the addresses might contains spaces, this output - is not suitable for programmatic consumption. - </para> - - <para>See also the options <option>--show-types</option>, - <option>--all</option>, and <option>--failed</option>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>start <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Start (activate) one or more units specified on the - command line.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>stop <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Stop (deactivate) one or more units specified on the - command line.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>reload <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Asks all units listed on the command line to reload - their configuration. Note that this will reload the - service-specific configuration, not the unit configuration - file of systemd. If you want systemd to reload the - configuration file of a unit use the - <command>daemon-reload</command> command. In other words: - for the example case of Apache, this will reload Apache's - <filename>httpd.conf</filename> in the web server, not the - <filename>apache.service</filename> systemd unit - file.</para> - - <para>This command should not be confused with the - <command>daemon-reload</command> or <command>load</command> - commands.</para> - </listitem> - - </varlistentry> - <varlistentry> - <term><command>restart <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Restart one or more units specified on the command - line. If the units are not running yet, they will be - started.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>try-restart <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Restart one or more units specified on the command - line if the units are running. This does nothing if units are not - running. Note that, for compatibility with Red Hat init - scripts, <command>condrestart</command> is equivalent to this - command.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>reload-or-restart <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Reload one or more units if they support it. If not, - restart them instead. If the units are not running yet, they - will be started.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>reload-or-try-restart <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Reload one or more units if they support it. If not, - restart them instead. This does nothing if the units are not - running. Note that, for compatibility with SysV init scripts, - <command>force-reload</command> is equivalent to this - command.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>isolate <replaceable>NAME</replaceable></command></term> - - <listitem> - <para>Start the unit specified on the command line and its - dependencies and stop all others.</para> - - <para>This is similar to changing the runlevel in a - traditional init system. The <command>isolate</command> - command will immediately stop processes that are not enabled - in the new unit, possibly including the graphical - environment or terminal you are currently using.</para> - - <para>Note that this is allowed only on units where - <option>AllowIsolate=</option> is enabled. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>kill <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Send a signal to one or more processes of the - unit. Use <option>--kill-who=</option> to select which - process to kill. Use <option>--kill-mode=</option> to select - the kill mode and <option>--signal=</option> to select the - signal to send.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>is-active <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Check whether any of the specified units are active - (i.e. running). Returns an exit code 0 if at least one is - active, non-zero otherwise. Unless <option>--quiet</option> - is specified, this will also print the current unit state to - STDOUT.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>is-failed <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Check whether any of the specified units are in a "failed" state. - Returns an exit code 0 if at least one has failed, non-zero - otherwise. Unless <option>--quiet</option> is specified, this - will also print the current unit state to - STDOUT.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>status [<replaceable>NAME</replaceable>...|<replaceable>PID</replaceable>...]</command></term> - - <listitem> - <para>Show terse runtime status information about one or - more units, followed by most recent log data from the - journal. If no units are specified, show all units (subject - to limitations specified with <option>-t</option>). If a PID - is passed, show information about the unit the process - belongs to.</para> - - <para>This function is intended to generate human-readable - output. If you are looking for computer-parsable output, use - <command>show</command> instead.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>show [<replaceable>NAME</replaceable>...|<replaceable>JOB</replaceable>...]</command></term> - - <listitem> - <para>Show properties of one or more units, jobs, or the - manager itself. If no argument is specified properties of - the manager will be shown. If a unit name is specified - properties of the unit is shown, and if a job id is - specified properties of the job is shown. By default, empty - properties are suppressed. Use <option>--all</option> to - show those too. To select specific properties to show use - <option>--property=</option>. This command is intended to be - used whenever computer-parsable output is required. Use - <command>status</command> if you are looking for formatted - human-readable output.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>set-property <replaceable>NAME</replaceable> <replaceable>ASSIGNMENT</replaceable>...</command></term> - - <listitem> - <para>Set the specified unit properties at runtime where - this is supported. This allows changing configuration - parameter properties such as resource management controls at - runtime. Not all properties may be changed at runtime, but - many resource management settings (primarily those in - <citerefentry><refentrytitle>systemd.cgroup</refentrytitle><manvolnum>5</manvolnum></citerefentry>) - may. The changes are applied instantly, and stored on disk - for future boots, unless <option>--runtime</option> is - passed, in which case the settings only apply until the next - reboot. The syntax of the property assignment follows - closely the syntax of assignments in unit files.</para> - - <para>Example: <command>systemctl set-property foobar.service CPUShares=777</command></para> - - <para>Note that this command allows changing multiple - properties at the same time, which is preferable over - setting them individually. Like unit file configuration - settings, assigning the empty list to list parameters will - reset the list.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>help <replaceable>NAME</replaceable>...|<replaceable>PID</replaceable>...</command></term> - - <listitem> - <para>Show manual pages for one or more units, if - available. If a PID is given, the manual pages for the unit - the process belongs to are shown.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>reset-failed [<replaceable>NAME</replaceable>...]</command></term> - - <listitem> - <para>Reset the <literal>failed</literal> state of the - specified units, or if no unit name is passed, reset the state of all - units. When a unit fails in some way (i.e. process exiting - with non-zero error code, terminating abnormally or timing - out), it will automatically enter the - <literal>failed</literal> state and its exit code and status - is recorded for introspection by the administrator until the - service is restarted or reset with this command.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>list-unit-files</command></term> - - <listitem> - <para>List installed unit files.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>enable <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Enable one or more unit files or unit file instances, - as specified on the command line. This will create a number - of symlinks as encoded in the <literal>[Install]</literal> - sections of the unit files. After the symlinks have been - created, the systemd configuration is reloaded (in a way that - is equivalent to <command>daemon-reload</command>) to ensure - the changes are taken into account immediately. Note that - this does <emphasis>not</emphasis> have the effect of also - starting any of the units being enabled. If this - is desired, a separate <command>start</command> command must - be invoked for the unit. Also note that in case of instance - enablement, symlinks named the same as instances are created in - the install location, however they all point to the same - template unit file.</para> - - <para>This command will print the actions executed. This - output may be suppressed by passing <option>--quiet</option>. - </para> - - <para>Note that this operation creates only the suggested - symlinks for the units. While this command is the - recommended way to manipulate the unit configuration - directory, the administrator is free to make additional - changes manually by placing or removing symlinks in the - directory. This is particularly useful to create - configurations that deviate from the suggested default - installation. In this case, the administrator must make sure - to invoke <command>daemon-reload</command> manually as - necessary to ensure the changes are taken into account. - </para> - - <para>Enabling units should not be confused with starting - (activating) units, as done by the <command>start</command> - command. Enabling and starting units is orthogonal: units - may be enabled without being started and started without - being enabled. Enabling simply hooks the unit into various - suggested places (for example, so that the unit is - automatically started on boot or when a particular kind of - hardware is plugged in). Starting actually spawns the daemon - process (in case of service units), or binds the socket (in - case of socket units), and so on.</para> - - <para>Depending on whether <option>--system</option>, - <option>--user</option> or <option>--global</option> is - specified, this enables the unit for the system, for the - calling user only or for all future logins of all - users. Note that in the last case, no systemd daemon - configuration is reloaded.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>disable <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Disables one or more units. This removes all symlinks - to the specified unit files from the unit configuration - directory, and hence undoes the changes made by - <command>enable</command>. Note however that this removes - all symlinks to the unit files (i.e. including manual - additions), not just those actually created by - <command>enable</command>. This call implicitly reloads the - systemd daemon configuration after completing the disabling - of the units. Note that this command does not implicitly - stop the units that are being disabled. If this is desired, - an additional <command>stop</command> command should be - executed afterwards.</para> - - <para>This command will print the actions executed. This - output may be suppressed by passing <option>--quiet</option>. - </para> - - <para>This command honors <option>--system</option>, - <option>--user</option>, <option>--global</option> in a - similar way as <command>enable</command>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>is-enabled <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Checks whether any of the specified unit files are - enabled (as with <command>enable</command>). Returns an exit - code of 0 if at least one is enabled, non-zero - otherwise. Prints the current enable status. To suppress - this output, use <option>--quiet</option>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>reenable <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Reenable one or more unit files, as specified on the - command line. This is a combination of - <command>disable</command> and <command>enable</command> and - is useful to reset the symlinks a unit is enabled with to - the defaults configured in the <literal>[Install]</literal> - section of the unit file.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>preset <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Reset one or more unit files, as specified on the - command line, to the defaults configured in the preset - policy files. This has the same effect as - <command>disable</command> or <command>enable</command>, - depending how the unit is listed in the preset files. For - more information on the preset policy format, see - <citerefentry><refentrytitle>systemd.preset</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - For more information on the concept of presets, please - consult the - <ulink url="http://freedesktop.org/wiki/Software/systemd/Preset">Preset</ulink> - document.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>mask <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Mask one or more unit files, as specified on the - command line. This will link these units to - <filename>/dev/null</filename>, making it impossible to - start them. This is a stronger version of - <command>disable</command>, since it prohibits all kinds of - activation of the unit, including manual activation. Use - this option with care.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>unmask <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Unmask one or more unit files, as specified on the - command line. This will undo the effect of - <command>mask</command>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>link <replaceable>FILENAME</replaceable>...</command></term> - - <listitem> - <para>Link a unit file that is not in the unit file search - paths into the unit file search path. This requires an - absolute path to a unit file. The effect of this can be - undone with <command>disable</command>. The effect of this - command is that a unit file is available for - <command>start</command> and other commands although it - is not installed directly in the unit search path.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>get-default</command></term> - - <listitem> - <para>Get the default target specified - via <filename>default.target</filename> link.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>set-default <replaceable>NAME</replaceable></command></term> - - <listitem> - <para>Set the default target to boot into. Command links - <filename>default.target</filename> to the given unit.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>list-jobs</command></term> - - <listitem> - <para>List jobs that are in progress.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>cancel <replaceable>JOB</replaceable>...</command></term> - - <listitem> - <para>Cancel one or more jobs specified on the command line - by their numeric job IDs. If no job ID is specified, cancel - all pending jobs.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>list-dependencies <replaceable>NAME</replaceable></command></term> - - <listitem> - <para>Shows required and wanted units of the specified - unit. If no unit is specified, - <filename>default.target</filename> is implied. Target units - are recursively expanded. When <option>--all</option> is - passed, all other units are recursively expanded as - well.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>snapshot [<replaceable>NAME</replaceable>]</command></term> - - <listitem> - <para>Create a snapshot. If a snapshot name is specified, - the new snapshot will be named after it. If none is - specified, an automatic snapshot name is generated. In either - case, the snapshot name used is printed to STDOUT, unless - <option>--quiet</option> is specified.</para> - - <para>A snapshot refers to a saved state of the systemd - manager. It is implemented itself as a unit that is - generated dynamically with this command and has dependencies - on all units active at the time. At a later time, the user - may return to this state by using the - <command>isolate</command> command on the snapshot unit. - </para> - - <para>Snapshots are only useful for saving and restoring - which units are running or are stopped, they do not - save/restore any other state. Snapshots are dynamic and lost - on reboot.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>delete <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Remove a snapshot previously created with - <command>snapshot</command>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>daemon-reload</command></term> - - <listitem> - <para>Reload systemd manager configuration. This will reload - all unit files and recreate the entire dependency - tree. While the daemon is reloaded, all sockets systemd - listens on on behalf of user configuration will stay - accessible.</para> <para>This command should not be confused - with the <command>load</command> or - <command>reload</command> commands.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>daemon-reexec</command></term> - - <listitem> - <para>Reexecute the systemd manager. This will serialize the - manager state, reexecute the process and deserialize the - state again. This command is of little use except for - debugging and package upgrades. Sometimes it might be - helpful as a heavy-weight <command>daemon-reload</command>. - While the daemon is reexecuted, all sockets systemd listening - on behalf of user configuration will stay accessible. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>show-environment</command></term> - - <listitem> - <para>Dump the systemd manager environment block. The - environment block will be dumped in straight-forward form - suitable for sourcing into a shell script. This environment - block will be passed to all processes the manager - spawns.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>set-environment <replaceable>VARIABLE=VALUE</replaceable>...</command></term> - - <listitem> - <para>Set one or more systemd manager environment variables, - as specified on the command line.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>unset-environment <replaceable>VARIABLE</replaceable>...</command></term> - - <listitem> - <para>Unset one or more systemd manager environment - variables. If only a variable name is specified, it will be - removed regardless of its value. If a variable and a value - are specified, the variable is only removed if it has the - specified value.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>default</command></term> - - <listitem> - <para>Enter default mode. This is mostly equivalent to - <command>isolate default.target</command>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>rescue</command></term> - - <listitem> - <para>Enter rescue mode. This is mostly equivalent to - <command>isolate rescue.target</command>, but also prints a - wall message to all users.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>emergency</command></term> - - <listitem> - <para>Enter emergency mode. This is mostly equivalent to - <command>isolate emergency.target</command>, but also prints - a wall message to all users.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>halt</command></term> - - <listitem> - <para>Shut down and halt the system. This is mostly equivalent to - <command>start halt.target --irreversible</command>, but also - prints a wall message to all users. If combined with - <option>--force</option>, shutdown of all running services is - skipped, however all processes are killed and all file - systems are unmounted or mounted read-only, immediately - followed by the system halt. If <option>--force</option> is - specified twice, the operation is immediately executed - without terminating any processes or unmounting any file - systems. This may result in data loss.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>poweroff</command></term> - - <listitem> - <para>Shut down and power-off the system. This is mostly - equivalent to <command>start poweroff.target --irreversible</command>, - but also prints a wall message to all users. If combined with - <option>--force</option>, shutdown of all running services is - skipped, however all processes are killed and all file - systems are unmounted or mounted read-only, immediately - followed by the powering off. If <option>--force</option> is - specified twice, the operation is immediately executed - without terminating any processes or unmounting any file - systems. This may result in data loss.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>reboot</command></term> - - <listitem> - <para>Shut down and reboot the system. This is mostly - equivalent to <command>start reboot.target --irreversible</command>, - but also prints a wall message to all users. If combined with - <option>--force</option>, shutdown of all running services is - skipped, however all processes are killed and all file - systems are unmounted or mounted read-only, immediately - followed by the reboot. If <option>--force</option> is - specified twice, the operation is immediately executed - without terminating any processes or unmounting any file - systems. This may result in data loss.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>kexec</command></term> - - <listitem> - <para>Shut down and reboot the system via kexec. This is - mostly equivalent to <command>start kexec.target --irreversible</command>, - but also prints a wall message to all users. If combined - with <option>--force</option>, shutdown of all running - services is skipped, however all processes are killed and - all file systems are unmounted or mounted read-only, - immediately followed by the reboot.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>exit</command></term> - - <listitem> - <para>Ask the systemd manager to quit. This is only - supported for user service managers (i.e. in conjunction - with the <option>--user</option> option) and will fail - otherwise.</para> - </listitem> - - </varlistentry> - <varlistentry> - <term><command>suspend</command></term> - - <listitem> - <para>Suspend the system. This will trigger activation of - the special <filename>suspend.target</filename> target. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>hibernate</command></term> - - <listitem> - <para>Hibernate the system. This will trigger activation of - the special <filename>hibernate.target</filename> target. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>hybrid-sleep</command></term> - - <listitem> - <para>Hibernate and suspend the system. This will trigger - activation of the special - <filename>hybrid-sleep.target</filename> target.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>switch-root <replaceable>ROOT</replaceable> [<replaceable>INIT</replaceable>]</command></term> - - <listitem> - <para>Switches to a different root directory and executes a - new system manager process below it. This is intended for - usage in initial RAM disks ("initrd"), and will transition - from the initrd's system manager process (a.k.a "init" - process) to the main system manager process. This call takes two - arguments: the directory that is to become the new root directory, and - the path to the new system manager binary below it to - execute as PID 1. If the latter is omitted or the empty - string, a systemd binary will automatically be searched for - and used as init. If the system manager path is omitted or - equal to the empty string, the state of the initrd's system - manager process is passed to the main system manager, which - allows later introspection of the state of the services - involved in the initrd boot.</para> - </listitem> - </varlistentry> - </variablelist> + </programlisting> + Note: because the addresses might contains spaces, this output + is not suitable for programmatic consumption. + </para> + + <para>See also the options <option>--show-types</option>, + <option>--all</option>, and <option>--failed</option>.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><command>start <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Start (activate) one or more units specified on the + command line.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>stop <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Stop (deactivate) one or more units specified on the + command line.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>reload <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Asks all units listed on the command line to reload + their configuration. Note that this will reload the + service-specific configuration, not the unit configuration + file of systemd. If you want systemd to reload the + configuration file of a unit use the + <command>daemon-reload</command> command. In other words: + for the example case of Apache, this will reload Apache's + <filename>httpd.conf</filename> in the web server, not the + <filename>apache.service</filename> systemd unit + file.</para> + + <para>This command should not be confused with the + <command>daemon-reload</command> or <command>load</command> + commands.</para> + </listitem> + + </varlistentry> + <varlistentry> + <term><command>restart <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Restart one or more units specified on the command + line. If the units are not running yet, they will be + started.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>try-restart <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Restart one or more units specified on the command + line if the units are running. This does nothing if units are not + running. Note that, for compatibility with Red Hat init + scripts, <command>condrestart</command> is equivalent to this + command.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>reload-or-restart <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Reload one or more units if they support it. If not, + restart them instead. If the units are not running yet, they + will be started.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>reload-or-try-restart <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Reload one or more units if they support it. If not, + restart them instead. This does nothing if the units are not + running. Note that, for compatibility with SysV init scripts, + <command>force-reload</command> is equivalent to this + command.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>isolate <replaceable>NAME</replaceable></command></term> + + <listitem> + <para>Start the unit specified on the command line and its + dependencies and stop all others.</para> + + <para>This is similar to changing the runlevel in a + traditional init system. The <command>isolate</command> + command will immediately stop processes that are not enabled + in the new unit, possibly including the graphical + environment or terminal you are currently using.</para> + + <para>Note that this is allowed only on units where + <option>AllowIsolate=</option> is enabled. See + <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> + for details.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>kill <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Send a signal to one or more processes of the + unit. Use <option>--kill-who=</option> to select which + process to kill. Use <option>--kill-mode=</option> to select + the kill mode and <option>--signal=</option> to select the + signal to send.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>is-active <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Check whether any of the specified units are active + (i.e. running). Returns an exit code 0 if at least one is + active, non-zero otherwise. Unless <option>--quiet</option> + is specified, this will also print the current unit state to + STDOUT.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>is-failed <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Check whether any of the specified units are in a "failed" state. + Returns an exit code 0 if at least one has failed, non-zero + otherwise. Unless <option>--quiet</option> is specified, this + will also print the current unit state to + STDOUT.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>status [<replaceable>NAME</replaceable>...|<replaceable>PID</replaceable>...]</command></term> + + <listitem> + <para>Show terse runtime status information about one or + more units, followed by most recent log data from the + journal. If no units are specified, show all units (subject + to limitations specified with <option>-t</option>). If a PID + is passed, show information about the unit the process + belongs to.</para> + + <para>This function is intended to generate human-readable + output. If you are looking for computer-parsable output, use + <command>show</command> instead.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>show [<replaceable>NAME</replaceable>...|<replaceable>JOB</replaceable>...]</command></term> + + <listitem> + <para>Show properties of one or more units, jobs, or the + manager itself. If no argument is specified properties of + the manager will be shown. If a unit name is specified + properties of the unit is shown, and if a job id is + specified properties of the job is shown. By default, empty + properties are suppressed. Use <option>--all</option> to + show those too. To select specific properties to show use + <option>--property=</option>. This command is intended to be + used whenever computer-parsable output is required. Use + <command>status</command> if you are looking for formatted + human-readable output.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><command>set-property <replaceable>NAME</replaceable> <replaceable>ASSIGNMENT</replaceable>...</command></term> + + <listitem> + <para>Set the specified unit properties at runtime where + this is supported. This allows changing configuration + parameter properties such as resource management controls at + runtime. Not all properties may be changed at runtime, but + many resource management settings (primarily those in + <citerefentry><refentrytitle>systemd.cgroup</refentrytitle><manvolnum>5</manvolnum></citerefentry>) + may. The changes are applied instantly, and stored on disk + for future boots, unless <option>--runtime</option> is + passed, in which case the settings only apply until the next + reboot. The syntax of the property assignment follows + closely the syntax of assignments in unit files.</para> + + <para>Example: <command>systemctl set-property foobar.service CPUShares=777</command></para> + + <para>Note that this command allows changing multiple + properties at the same time, which is preferable over + setting them individually. Like unit file configuration + settings, assigning the empty list to list parameters will + reset the list.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><command>help <replaceable>NAME</replaceable>...|<replaceable>PID</replaceable>...</command></term> + + <listitem> + <para>Show manual pages for one or more units, if + available. If a PID is given, the manual pages for the unit + the process belongs to are shown.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><command>reset-failed [<replaceable>NAME</replaceable>...]</command></term> + + <listitem> + <para>Reset the <literal>failed</literal> state of the + specified units, or if no unit name is passed, reset the state of all + units. When a unit fails in some way (i.e. process exiting + with non-zero error code, terminating abnormally or timing + out), it will automatically enter the + <literal>failed</literal> state and its exit code and status + is recorded for introspection by the administrator until the + service is restarted or reset with this command.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><command>list-dependencies <replaceable>NAME</replaceable></command></term> + + <listitem> + <para>Shows required and wanted units of the specified + unit. If no unit is specified, + <filename>default.target</filename> is implied. Target units + are recursively expanded. When <option>--all</option> is + passed, all other units are recursively expanded as + well.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect2> + + <refsect2> + <title>Unit File Commands</title> + + <variablelist> + <varlistentry> + <term><command>list-unit-files</command></term> + + <listitem> + <para>List installed unit files.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><command>enable <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Enable one or more unit files or unit file instances, + as specified on the command line. This will create a number + of symlinks as encoded in the <literal>[Install]</literal> + sections of the unit files. After the symlinks have been + created, the systemd configuration is reloaded (in a way that + is equivalent to <command>daemon-reload</command>) to ensure + the changes are taken into account immediately. Note that + this does <emphasis>not</emphasis> have the effect of also + starting any of the units being enabled. If this + is desired, a separate <command>start</command> command must + be invoked for the unit. Also note that in case of instance + enablement, symlinks named the same as instances are created in + the install location, however they all point to the same + template unit file.</para> + + <para>This command will print the actions executed. This + output may be suppressed by passing <option>--quiet</option>. + </para> + + <para>Note that this operation creates only the suggested + symlinks for the units. While this command is the + recommended way to manipulate the unit configuration + directory, the administrator is free to make additional + changes manually by placing or removing symlinks in the + directory. This is particularly useful to create + configurations that deviate from the suggested default + installation. In this case, the administrator must make sure + to invoke <command>daemon-reload</command> manually as + necessary to ensure the changes are taken into account. + </para> + + <para>Enabling units should not be confused with starting + (activating) units, as done by the <command>start</command> + command. Enabling and starting units is orthogonal: units + may be enabled without being started and started without + being enabled. Enabling simply hooks the unit into various + suggested places (for example, so that the unit is + automatically started on boot or when a particular kind of + hardware is plugged in). Starting actually spawns the daemon + process (in case of service units), or binds the socket (in + case of socket units), and so on.</para> + + <para>Depending on whether <option>--system</option>, + <option>--user</option> or <option>--global</option> is + specified, this enables the unit for the system, for the + calling user only or for all future logins of all + users. Note that in the last case, no systemd daemon + configuration is reloaded.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><command>disable <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Disables one or more units. This removes all symlinks + to the specified unit files from the unit configuration + directory, and hence undoes the changes made by + <command>enable</command>. Note however that this removes + all symlinks to the unit files (i.e. including manual + additions), not just those actually created by + <command>enable</command>. This call implicitly reloads the + systemd daemon configuration after completing the disabling + of the units. Note that this command does not implicitly + stop the units that are being disabled. If this is desired, + an additional <command>stop</command> command should be + executed afterwards.</para> + + <para>This command will print the actions executed. This + output may be suppressed by passing <option>--quiet</option>. + </para> + + <para>This command honors <option>--system</option>, + <option>--user</option>, <option>--global</option> in a + similar way as <command>enable</command>.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><command>is-enabled <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Checks whether any of the specified unit files are + enabled (as with <command>enable</command>). Returns an exit + code of 0 if at least one is enabled, non-zero + otherwise. Prints the current enable status. To suppress + this output, use <option>--quiet</option>.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><command>reenable <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Reenable one or more unit files, as specified on the + command line. This is a combination of + <command>disable</command> and <command>enable</command> and + is useful to reset the symlinks a unit is enabled with to + the defaults configured in the <literal>[Install]</literal> + section of the unit file.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><command>preset <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Reset one or more unit files, as specified on the + command line, to the defaults configured in the preset + policy files. This has the same effect as + <command>disable</command> or <command>enable</command>, + depending how the unit is listed in the preset files. For + more information on the preset policy format, see + <citerefentry><refentrytitle>systemd.preset</refentrytitle><manvolnum>5</manvolnum></citerefentry>. + For more information on the concept of presets, please + consult the + <ulink url="http://freedesktop.org/wiki/Software/systemd/Preset">Preset</ulink> + document.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><command>mask <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Mask one or more unit files, as specified on the + command line. This will link these units to + <filename>/dev/null</filename>, making it impossible to + start them. This is a stronger version of + <command>disable</command>, since it prohibits all kinds of + activation of the unit, including manual activation. Use + this option with care.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><command>unmask <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Unmask one or more unit files, as specified on the + command line. This will undo the effect of + <command>mask</command>.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><command>link <replaceable>FILENAME</replaceable>...</command></term> + + <listitem> + <para>Link a unit file that is not in the unit file search + paths into the unit file search path. This requires an + absolute path to a unit file. The effect of this can be + undone with <command>disable</command>. The effect of this + command is that a unit file is available for + <command>start</command> and other commands although it + is not installed directly in the unit search path.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><command>get-default</command></term> + + <listitem> + <para>Get the default target specified + via <filename>default.target</filename> link.</para> + </listitem> + </varlistentry> + + <varlistentry> + <term><command>set-default <replaceable>NAME</replaceable></command></term> + + <listitem> + <para>Set the default target to boot into. Command links + <filename>default.target</filename> to the given unit.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect2> + + <refsect2> + <title>Job Commands</title> + + <variablelist> + <varlistentry> + <term><command>list-jobs</command></term> + + <listitem> + <para>List jobs that are in progress.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>cancel <replaceable>JOB</replaceable>...</command></term> + + <listitem> + <para>Cancel one or more jobs specified on the command line + by their numeric job IDs. If no job ID is specified, cancel + all pending jobs.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect2> + + <refsect2> + <title>Snapshot Commands</title> + + <variablelist> + <varlistentry> + <term><command>snapshot [<replaceable>NAME</replaceable>]</command></term> + + <listitem> + <para>Create a snapshot. If a snapshot name is specified, + the new snapshot will be named after it. If none is + specified, an automatic snapshot name is generated. In either + case, the snapshot name used is printed to STDOUT, unless + <option>--quiet</option> is specified.</para> + + <para>A snapshot refers to a saved state of the systemd + manager. It is implemented itself as a unit that is + generated dynamically with this command and has dependencies + on all units active at the time. At a later time, the user + may return to this state by using the + <command>isolate</command> command on the snapshot unit. + </para> + + <para>Snapshots are only useful for saving and restoring + which units are running or are stopped, they do not + save/restore any other state. Snapshots are dynamic and lost + on reboot.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>delete <replaceable>NAME</replaceable>...</command></term> + + <listitem> + <para>Remove a snapshot previously created with + <command>snapshot</command>.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect2> + + <refsect2> + <title>Environment Commands</title> + + <variablelist> + <varlistentry> + <term><command>show-environment</command></term> + + <listitem> + <para>Dump the systemd manager environment block. The + environment block will be dumped in straight-forward form + suitable for sourcing into a shell script. This environment + block will be passed to all processes the manager + spawns.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>set-environment <replaceable>VARIABLE=VALUE</replaceable>...</command></term> + + <listitem> + <para>Set one or more systemd manager environment variables, + as specified on the command line.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>unset-environment <replaceable>VARIABLE</replaceable>...</command></term> + + <listitem> + <para>Unset one or more systemd manager environment + variables. If only a variable name is specified, it will be + removed regardless of its value. If a variable and a value + are specified, the variable is only removed if it has the + specified value.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect2> + + <refsect2> + <title>Manager Lifecycle Commands</title> + + <variablelist> + <varlistentry> + <term><command>daemon-reload</command></term> + + <listitem> + <para>Reload systemd manager configuration. This will reload + all unit files and recreate the entire dependency + tree. While the daemon is reloaded, all sockets systemd + listens on on behalf of user configuration will stay + accessible.</para> <para>This command should not be confused + with the <command>load</command> or + <command>reload</command> commands.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>daemon-reexec</command></term> + + <listitem> + <para>Reexecute the systemd manager. This will serialize the + manager state, reexecute the process and deserialize the + state again. This command is of little use except for + debugging and package upgrades. Sometimes it might be + helpful as a heavy-weight <command>daemon-reload</command>. + While the daemon is reexecuted, all sockets systemd listening + on behalf of user configuration will stay accessible. + </para> + </listitem> + </varlistentry> + </variablelist> + </refsect2> + + <refsect2> + <title>System Commands</title> + + <variablelist> + <varlistentry> + <term><command>default</command></term> + + <listitem> + <para>Enter default mode. This is mostly equivalent to + <command>isolate default.target</command>.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>rescue</command></term> + + <listitem> + <para>Enter rescue mode. This is mostly equivalent to + <command>isolate rescue.target</command>, but also prints a + wall message to all users.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>emergency</command></term> + + <listitem> + <para>Enter emergency mode. This is mostly equivalent to + <command>isolate emergency.target</command>, but also prints + a wall message to all users.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>halt</command></term> + + <listitem> + <para>Shut down and halt the system. This is mostly equivalent to + <command>start halt.target --irreversible</command>, but also + prints a wall message to all users. If combined with + <option>--force</option>, shutdown of all running services is + skipped, however all processes are killed and all file + systems are unmounted or mounted read-only, immediately + followed by the system halt. If <option>--force</option> is + specified twice, the operation is immediately executed + without terminating any processes or unmounting any file + systems. This may result in data loss.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>poweroff</command></term> + + <listitem> + <para>Shut down and power-off the system. This is mostly + equivalent to <command>start poweroff.target --irreversible</command>, + but also prints a wall message to all users. If combined with + <option>--force</option>, shutdown of all running services is + skipped, however all processes are killed and all file + systems are unmounted or mounted read-only, immediately + followed by the powering off. If <option>--force</option> is + specified twice, the operation is immediately executed + without terminating any processes or unmounting any file + systems. This may result in data loss.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>reboot</command></term> + + <listitem> + <para>Shut down and reboot the system. This is mostly + equivalent to <command>start reboot.target --irreversible</command>, + but also prints a wall message to all users. If combined with + <option>--force</option>, shutdown of all running services is + skipped, however all processes are killed and all file + systems are unmounted or mounted read-only, immediately + followed by the reboot. If <option>--force</option> is + specified twice, the operation is immediately executed + without terminating any processes or unmounting any file + systems. This may result in data loss.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>kexec</command></term> + + <listitem> + <para>Shut down and reboot the system via kexec. This is + mostly equivalent to <command>start kexec.target --irreversible</command>, + but also prints a wall message to all users. If combined + with <option>--force</option>, shutdown of all running + services is skipped, however all processes are killed and + all file systems are unmounted or mounted read-only, + immediately followed by the reboot.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>exit</command></term> + + <listitem> + <para>Ask the systemd manager to quit. This is only + supported for user service managers (i.e. in conjunction + with the <option>--user</option> option) and will fail + otherwise.</para> + </listitem> + + </varlistentry> + <varlistentry> + <term><command>suspend</command></term> + + <listitem> + <para>Suspend the system. This will trigger activation of + the special <filename>suspend.target</filename> target. + </para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>hibernate</command></term> + + <listitem> + <para>Hibernate the system. This will trigger activation of + the special <filename>hibernate.target</filename> target. + </para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>hybrid-sleep</command></term> + + <listitem> + <para>Hibernate and suspend the system. This will trigger + activation of the special + <filename>hybrid-sleep.target</filename> target.</para> + </listitem> + </varlistentry> + <varlistentry> + <term><command>switch-root <replaceable>ROOT</replaceable> [<replaceable>INIT</replaceable>]</command></term> + + <listitem> + <para>Switches to a different root directory and executes a + new system manager process below it. This is intended for + usage in initial RAM disks ("initrd"), and will transition + from the initrd's system manager process (a.k.a "init" + process) to the main system manager process. This call takes two + arguments: the directory that is to become the new root directory, and + the path to the new system manager binary below it to + execute as PID 1. If the latter is omitted or the empty + string, a systemd binary will automatically be searched for + and used as init. If the system manager path is omitted or + equal to the empty string, the state of the initrd's system + manager process is passed to the main system manager, which + allows later introspection of the state of the services + involved in the initrd boot.</para> + </listitem> + </varlistentry> + </variablelist> + </refsect2> </refsect1> |