move imported udev into place

14 files changed, 531 insertions, 0 deletions

diff --git a/rules/.gitignore b/rules/.gitignore
new file mode 100644
index 0000000000..93a50ddd80
--- /dev/null
+++ b/rules/.gitignore
@@ -0,0 +1 @@
+/99-systemd.rules
diff --git a/rules/42-usb-hid-pm.rules b/rules/42-usb-hid-pm.rules
new file mode 100644
index 0000000000..d5d5897c31
--- /dev/null
+++ b/rules/42-usb-hid-pm.rules
@@ -0,0 +1,49 @@
+#
+# Enable autosuspend for qemu emulated usb hid devices.
+#
+# Note that there are buggy qemu versions which advertise remote
+# wakeup support but don't actually implement it correctly.  This
+# is the reason why we need a match for the serial number here.
+# The serial number "42" is used to tag the implementations where
+# remote wakeup is working.
+#
+
+ACTION=="add", SUBSYSTEM=="usb", ATTR{product}=="QEMU USB Mouse", ATTR{serial}=="42", TEST=="power/control", ATTR{power/control}="auto"
+ACTION=="add", SUBSYSTEM=="usb", ATTR{product}=="QEMU USB Tablet", ATTR{serial}=="42", TEST=="power/control", ATTR{power/control}="auto"
+ACTION=="add", SUBSYSTEM=="usb", ATTR{product}=="QEMU USB Keyboard", ATTR{serial}=="42", TEST=="power/control", ATTR{power/control}="auto"
+
+#
+# Enable autosuspend for KVM and iLO usb hid devices. These are
+# effectively self-powered (despite what some claim in their USB
+# profiles) and so it's safe to do so.
+#
+
+# AMI 046b:ff10
+ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="046b", ATTR{idProduct}=="ff10", TEST=="power/control", ATTR{power/control}="auto"
+
+#
+# Catch-all for Avocent HID devices. Keyed off interface in order to only
+# trigger on HID class devices.
+#
+ACTION=="add", SUBSYSTEM=="usb", ATTRS{idVendor}=="0624", ATTR{bInterfaceClass}=="03", TEST=="../power/control", ATTR{../power/control}="auto"
+
+# Dell DRAC 4
+ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="413c", ATTR{idProduct}=="2500", TEST=="power/control", ATTR{power/control}="auto"
+
+# Dell DRAC 5
+ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="413c", ATTR{idProduct}=="0000", TEST=="power/control", ATTR{power/control}="auto"
+
+# Hewlett Packard iLO
+ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="03f0", ATTR{idProduct}=="7029", TEST=="power/control", ATTR{power/control}="auto"
+ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="03f0", ATTR{idProduct}=="1027", TEST=="power/control", ATTR{power/control}="auto"
+
+# IBM remote access
+ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="04b3", ATTR{idProduct}=="4001", TEST=="power/control", ATTR{power/control}="auto"
+ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="04b3", ATTR{idProduct}=="4002", TEST=="power/control", ATTR{power/control}="auto"
+ACTION=="add", SUBSYSTEM=="usb", ATTRS{idVendor}=="04b3", ATTR{idProduct}=="4012", TEST=="power/control", ATTR{power/control}="auto"
+
+# Raritan Computer, Inc KVM.
+ACTION=="add", SUBSYSTEM=="usb", ATTR{idVendor}=="14dd", ATTR{idProduct}="0002", TEST=="power/control", ATTR{power/control}="auto"
+
+# USB HID devices that are internal to the machine should also be safe to autosuspend
+ACTION=="add", SUBSYSTEM=="usb", ATTR{bInterfaceClass}=="03", ATTRS{removable}=="fixed", TEST=="../power/control", ATTR{../power/control}="auto"
diff --git a/rules/50-udev-default.rules b/rules/50-udev-default.rules
new file mode 100644
index 0000000000..5ad787fc76
--- /dev/null
+++ b/rules/50-udev-default.rules
@@ -0,0 +1,107 @@
+# do not edit this file, it will be overwritten on update
+
+KERNEL=="pty[pqrstuvwxyzabcdef][0123456789abcdef]", GROUP="tty", MODE="0660"
+KERNEL=="tty[pqrstuvwxyzabcdef][0123456789abcdef]", GROUP="tty", MODE="0660"
+KERNEL=="ptmx", GROUP="tty", MODE="0666"
+KERNEL=="tty", GROUP="tty", MODE="0666"
+KERNEL=="tty[0-9]*", GROUP="tty", MODE="0620"
+KERNEL=="vcs|vcs[0-9]*|vcsa|vcsa[0-9]*", GROUP="tty"
+
+# serial
+KERNEL=="tty[A-Z]*[0-9]|pppox[0-9]*|ircomm[0-9]*|noz[0-9]*|rfcomm[0-9]*", GROUP="dialout"
+KERNEL=="mwave", GROUP="dialout"
+KERNEL=="hvc*|hvsi*", GROUP="dialout"
+
+# virtio serial / console ports
+KERNEL=="vport*", ATTR{name}=="?*", SYMLINK+="virtio-ports/$attr{name}"
+
+# mem
+KERNEL=="null|zero|full|random|urandom", MODE="0666"
+KERNEL=="mem|kmem|port|nvram", GROUP="kmem", MODE="0640"
+
+# input
+SUBSYSTEM=="input", ENV{ID_INPUT}=="", IMPORT{builtin}="input_id"
+KERNEL=="mouse*|mice|event*", MODE="0640"
+KERNEL=="ts[0-9]*|uinput", MODE="0640"
+KERNEL=="js[0-9]*", MODE="0644"
+
+# video4linux
+SUBSYSTEM=="video4linux", GROUP="video"
+KERNEL=="vttuner*", GROUP="video"
+KERNEL=="vtx*|vbi*", GROUP="video"
+KERNEL=="winradio*", GROUP="video"
+
+# graphics
+KERNEL=="agpgart", GROUP="video"
+KERNEL=="pmu", GROUP="video"
+KERNEL=="nvidia*|nvidiactl*", GROUP="video"
+SUBSYSTEM=="graphics", GROUP="video"
+SUBSYSTEM=="drm", GROUP="video"
+
+# sound
+SUBSYSTEM=="sound", GROUP="audio", \
+  OPTIONS+="static_node=snd/seq", OPTIONS+="static_node=snd/timer"
+
+# DVB (video)
+SUBSYSTEM=="dvb", GROUP="video"
+
+# FireWire (firewire-core driver: IIDC devices, AV/C devices)
+SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x00010*", GROUP="video"
+SUBSYSTEM=="firewire", ATTR{units}=="*0x00b09d:0x00010*", GROUP="video"
+SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x010001*", GROUP="video"
+SUBSYSTEM=="firewire", ATTR{units}=="*0x00a02d:0x014001*", GROUP="video"
+
+# 'libusb' device nodes
+SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664"
+SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id"
+
+# printer
+KERNEL=="parport[0-9]*", GROUP="lp"
+SUBSYSTEM=="printer", KERNEL=="lp*", GROUP="lp"
+SUBSYSTEM=="ppdev", GROUP="lp"
+KERNEL=="lp[0-9]*", GROUP="lp"
+KERNEL=="irlpt[0-9]*", GROUP="lp"
+SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp"
+
+# block
+SUBSYSTEM=="block", GROUP="disk"
+
+# floppy
+SUBSYSTEM=="block", KERNEL=="fd[0-9]", GROUP="floppy"
+
+# cdrom
+SUBSYSTEM=="block", KERNEL=="sr[0-9]*", GROUP="cdrom"
+SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="4|5", GROUP="cdrom"
+KERNEL=="pktcdvd[0-9]*", GROUP="cdrom"
+KERNEL=="pktcdvd", GROUP="cdrom"
+
+# tape
+KERNEL=="ht[0-9]*|nht[0-9]*", GROUP="tape"
+KERNEL=="pt[0-9]*|npt[0-9]*|pht[0-9]*", GROUP="tape"
+SUBSYSTEM=="scsi_generic|scsi_tape", SUBSYSTEMS=="scsi", ATTRS{type}=="1|8", GROUP="tape"
+
+# block-related
+KERNEL=="sch[0-9]*", GROUP="disk"
+SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="0", GROUP="disk"
+KERNEL=="pg[0-9]*", GROUP="disk"
+KERNEL=="qft[0-9]*|nqft[0-9]*|zqft[0-9]*|nzqft[0-9]*|rawqft[0-9]*|nrawqft[0-9]*", GROUP="disk"
+KERNEL=="rawctl", GROUP="disk"
+SUBSYSTEM=="raw", KERNEL=="raw[0-9]*", GROUP="disk"
+SUBSYSTEM=="aoe", GROUP="disk", MODE="0220"
+SUBSYSTEM=="aoe", KERNEL=="err", MODE="0440"
+
+# network
+KERNEL=="tun", MODE="0666", OPTIONS+="static_node=net/tun"
+KERNEL=="rfkill", MODE="0644"
+
+# CPU
+KERNEL=="cpu[0-9]*", MODE="0444"
+
+KERNEL=="fuse", ACTION=="add", MODE="0666", OPTIONS+="static_node=fuse"
+
+SUBSYSTEM=="rtc", ATTR{hctosys}=="1", SYMLINK+="rtc"
+KERNEL=="mmtimer", MODE="0644"
+KERNEL=="rflash[0-9]*", MODE="0400"
+KERNEL=="rrom[0-9]*", MODE="0400"
+
+SUBSYSTEM=="firmware", ACTION=="add", IMPORT{builtin}="firmware"
diff --git a/rules/60-persistent-alsa.rules b/rules/60-persistent-alsa.rules
new file mode 100644
index 0000000000..8154e2dbb5
--- /dev/null
+++ b/rules/60-persistent-alsa.rules
@@ -0,0 +1,14 @@
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="persistent_alsa_end"
+SUBSYSTEM!="sound", GOTO="persistent_alsa_end"
+KERNEL!="controlC[0-9]*", GOTO="persistent_alsa_end"
+
+SUBSYSTEMS=="usb", ENV{ID_MODEL}=="", IMPORT{builtin}="usb_id"
+ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="?*", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_USB_INTERFACE_NUM}"
+ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="", SYMLINK+="snd/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
+
+IMPORT{builtin}="path_id"
+ENV{ID_PATH}=="?*", SYMLINK+="snd/by-path/$env{ID_PATH}"
+
+LABEL="persistent_alsa_end"
diff --git a/rules/60-persistent-input.rules b/rules/60-persistent-input.rules
new file mode 100644
index 0000000000..fb798ddb05
--- /dev/null
+++ b/rules/60-persistent-input.rules
@@ -0,0 +1,38 @@
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="persistent_input_end"
+SUBSYSTEM!="input", GOTO="persistent_input_end"
+SUBSYSTEMS=="bluetooth", GOTO="persistent_input_end"
+
+SUBSYSTEMS=="usb", ENV{ID_BUS}=="", IMPORT{builtin}="usb_id"
+
+# determine class name for persistent symlinks
+ENV{ID_INPUT_KEYBOARD}=="?*", ENV{.INPUT_CLASS}="kbd"
+ENV{ID_INPUT_MOUSE}=="?*", ENV{.INPUT_CLASS}="mouse"
+ENV{ID_INPUT_TOUCHPAD}=="?*", ENV{.INPUT_CLASS}="mouse"
+ENV{ID_INPUT_TABLET}=="?*", ENV{.INPUT_CLASS}="mouse"
+ENV{ID_INPUT_JOYSTICK}=="?*", ENV{.INPUT_CLASS}="joystick"
+DRIVERS=="pcspkr", ENV{.INPUT_CLASS}="spkr"
+ATTRS{name}=="*dvb*|*DVB*|* IR *", ENV{.INPUT_CLASS}="ir"
+
+# fill empty serial number
+ENV{.INPUT_CLASS}=="?*", ENV{ID_SERIAL}=="", ENV{ID_SERIAL}="noserial"
+
+# by-id links
+KERNEL=="mouse*|js*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-$env{.INPUT_CLASS}"
+KERNEL=="mouse*|js*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="?*", ATTRS{bInterfaceNumber}!="00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$attr{bInterfaceNumber}-$env{.INPUT_CLASS}"
+KERNEL=="event*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-$env{.INPUT_CLASS}"
+KERNEL=="event*", ENV{ID_BUS}=="?*", ENV{.INPUT_CLASS}=="?*", ATTRS{bInterfaceNumber}=="?*", ATTRS{bInterfaceNumber}!="00", SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$attr{bInterfaceNumber}-event-$env{.INPUT_CLASS}"
+# allow empty class for USB devices, by appending the interface number
+SUBSYSTEMS=="usb", ENV{ID_BUS}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="", ATTRS{bInterfaceNumber}=="?*", \
+  SYMLINK+="input/by-id/$env{ID_BUS}-$env{ID_SERIAL}-event-if$attr{bInterfaceNumber}"
+
+# by-path
+SUBSYSTEMS=="pci|usb|platform|acpi", IMPORT{builtin}="path_id"
+ENV{ID_PATH}=="?*", KERNEL=="mouse*|js*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-$env{.INPUT_CLASS}"
+ENV{ID_PATH}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="?*", SYMLINK+="input/by-path/$env{ID_PATH}-event-$env{.INPUT_CLASS}"
+# allow empty class for platform and usb devices; platform supports only a single interface that way
+SUBSYSTEMS=="usb|platform", ENV{ID_PATH}=="?*", KERNEL=="event*", ENV{.INPUT_CLASS}=="", \
+  SYMLINK+="input/by-path/$env{ID_PATH}-event"
+
+LABEL="persistent_input_end"
diff --git a/rules/60-persistent-serial.rules b/rules/60-persistent-serial.rules
new file mode 100644
index 0000000000..2948200c53
--- /dev/null
+++ b/rules/60-persistent-serial.rules
@@ -0,0 +1,20 @@
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="persistent_serial_end"
+SUBSYSTEM!="tty", GOTO="persistent_serial_end"
+KERNEL!="ttyUSB[0-9]*|ttyACM[0-9]*", GOTO="persistent_serial_end"
+
+SUBSYSTEMS=="usb-serial", ENV{.ID_PORT}="$attr{port_number}"
+
+IMPORT{builtin}="path_id"
+ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="", SYMLINK+="serial/by-path/$env{ID_PATH}"
+ENV{ID_PATH}=="?*", ENV{.ID_PORT}=="?*", SYMLINK+="serial/by-path/$env{ID_PATH}-port$env{.ID_PORT}"
+
+IMPORT{builtin}="usb_id"
+ENV{ID_SERIAL}=="", GOTO="persistent_serial_end"
+SUBSYSTEMS=="usb", ENV{ID_USB_INTERFACE_NUM}="$attr{bInterfaceNumber}"
+ENV{ID_USB_INTERFACE_NUM}=="", GOTO="persistent_serial_end"
+ENV{.ID_PORT}=="", SYMLINK+="serial/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$env{ID_USB_INTERFACE_NUM}"
+ENV{.ID_PORT}=="?*", SYMLINK+="serial/by-id/$env{ID_BUS}-$env{ID_SERIAL}-if$env{ID_USB_INTERFACE_NUM}-port$env{.ID_PORT}"
+
+LABEL="persistent_serial_end"
diff --git a/rules/60-persistent-storage-tape.rules b/rules/60-persistent-storage-tape.rules
new file mode 100644
index 0000000000..f2eabd92a8
--- /dev/null
+++ b/rules/60-persistent-storage-tape.rules
@@ -0,0 +1,25 @@
+# do not edit this file, it will be overwritten on update
+
+# persistent storage links: /dev/tape/{by-id,by-path}
+
+ACTION=="remove", GOTO="persistent_storage_tape_end"
+
+# type 8 devices are "Medium Changers"
+SUBSYSTEM=="scsi_generic", SUBSYSTEMS=="scsi", ATTRS{type}=="8", IMPORT{program}="scsi_id --sg-version=3 --export --whitelisted -d $devnode", \
+  SYMLINK+="tape/by-id/scsi-$env{ID_SERIAL}"
+
+SUBSYSTEM!="scsi_tape", GOTO="persistent_storage_tape_end"
+
+KERNEL=="st*[0-9]|nst*[0-9]", ATTRS{ieee1394_id}=="?*", ENV{ID_SERIAL}="$attr{ieee1394_id}", ENV{ID_BUS}="ieee1394"
+KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
+KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", KERNELS=="[0-9]*:*[0-9]", ENV{.BSG_DEV}="$root/bsg/$id"
+KERNEL=="st*[0-9]|nst*[0-9]", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --whitelisted --export --device=$env{.BSG_DEV}", ENV{ID_BUS}="scsi"
+KERNEL=="st*[0-9]",  ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
+KERNEL=="nst*[0-9]", ENV{ID_SERIAL}=="?*", SYMLINK+="tape/by-id/$env{ID_BUS}-$env{ID_SERIAL}-nst"
+
+# by-path (parent device path)
+KERNEL=="st*[0-9]|nst*[0-9]", IMPORT{builtin}="path_id"
+KERNEL=="st*[0-9]", ENV{ID_PATH}=="?*", SYMLINK+="tape/by-path/$env{ID_PATH}"
+KERNEL=="nst*[0-9]", ENV{ID_PATH}=="?*", SYMLINK+="tape/by-path/$env{ID_PATH}-nst"
+
+LABEL="persistent_storage_tape_end"
diff --git a/rules/60-persistent-storage.rules b/rules/60-persistent-storage.rules
new file mode 100644
index 0000000000..b74821edd4
--- /dev/null
+++ b/rules/60-persistent-storage.rules
@@ -0,0 +1,89 @@
+# do not edit this file, it will be overwritten on update
+
+# persistent storage links: /dev/disk/{by-id,by-uuid,by-label,by-path}
+# scheme based on "Linux persistent device names", 2004, Hannes Reinecke <hare@suse.de>
+
+# forward scsi device event to corresponding block device
+ACTION=="change", SUBSYSTEM=="scsi", ENV{DEVTYPE}=="scsi_device", TEST=="block", ATTR{block/*/uevent}="change"
+
+ACTION=="remove", GOTO="persistent_storage_end"
+
+# enable in-kernel media-presence polling
+ACTION=="add", SUBSYSTEM=="module", KERNEL=="block", ATTR{parameters/events_dfl_poll_msecs}=="0", ATTR{parameters/events_dfl_poll_msecs}="2000"
+
+SUBSYSTEM!="block", GOTO="persistent_storage_end"
+
+# skip rules for inappropriate block devices
+KERNEL=="fd*|mtd*|nbd*|gnbd*|btibm*|dm-*|md*", GOTO="persistent_storage_end"
+
+# ignore partitions that span the entire disk
+TEST=="whole_disk", GOTO="persistent_storage_end"
+
+# for partitions import parent information
+ENV{DEVTYPE}=="partition", IMPORT{parent}="ID_*"
+
+# virtio-blk
+KERNEL=="vd*[!0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}"
+KERNEL=="vd*[0-9]", ATTRS{serial}=="?*", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/virtio-$env{ID_SERIAL}-part%n"
+
+# ATA devices with their own "ata" kernel subsystem
+KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="ata", IMPORT{program}="ata_id --export $devnode"
+# ATA devices using the "scsi" subsystem
+KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{vendor}=="ATA", IMPORT{program}="ata_id --export $devnode"
+# ATA/ATAPI devices (SPC-3 or later) using the "scsi" subsystem
+KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="scsi", ATTRS{type}=="5", ATTRS{scsi_level}=="[6-9]*", IMPORT{program}="ata_id --export $devnode"
+
+# Run ata_id on non-removable USB Mass Storage (SATA/PATA disks in enclosures)
+KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", ATTR{removable}=="0", SUBSYSTEMS=="usb", IMPORT{program}="ata_id --export $devnode"
+# Otherwise fall back to using usb_id for USB devices
+KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
+
+# scsi devices
+KERNEL=="sd*[!0-9]|sr*", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $devnode", ENV{ID_BUS}="scsi"
+KERNEL=="cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}!="?*", IMPORT{program}="scsi_id --export --whitelisted -d $devnode", ENV{ID_BUS}="cciss"
+KERNEL=="sd*|sr*|cciss*", ENV{DEVTYPE}=="disk", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}"
+KERNEL=="sd*|cciss*", ENV{DEVTYPE}=="partition", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/$env{ID_BUS}-$env{ID_SERIAL}-part%n"
+
+# firewire
+KERNEL=="sd*[!0-9]|sr*", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}"
+KERNEL=="sd*[0-9]", ATTRS{ieee1394_id}=="?*", SYMLINK+="disk/by-id/ieee1394-$attr{ieee1394_id}-part%n"
+
+KERNEL=="mmcblk[0-9]", SUBSYSTEMS=="mmc", ATTRS{name}=="?*", ATTRS{serial}=="?*", ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}"
+KERNEL=="mmcblk[0-9]p[0-9]", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/mmc-$env{ID_NAME}_$env{ID_SERIAL}-part%n"
+KERNEL=="mspblk[0-9]", SUBSYSTEMS=="memstick", ATTRS{name}=="?*", ATTRS{serial}=="?*", ENV{ID_NAME}="$attr{name}", ENV{ID_SERIAL}="$attr{serial}", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}"
+KERNEL=="mspblk[0-9]p[0-9]", ENV{ID_NAME}=="?*", ENV{ID_SERIAL}=="?*", SYMLINK+="disk/by-id/memstick-$env{ID_NAME}_$env{ID_SERIAL}-part%n"
+
+# by-path (parent device path)
+ENV{DEVTYPE}=="disk", DEVPATH!="*/virtual/*", IMPORT{builtin}="path_id"
+ENV{DEVTYPE}=="disk", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}"
+ENV{DEVTYPE}=="partition", ENV{ID_PATH}=="?*", SYMLINK+="disk/by-path/$env{ID_PATH}-part%n"
+
+# skip unpartitioned removable media devices from drivers which do not send "change" events
+ENV{DEVTYPE}=="disk", KERNEL!="sd*|sr*", ATTR{removable}=="1", GOTO="persistent_storage_end"
+
+# probe filesystem metadata of optical drives which have a media inserted
+KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="?*", \
+  IMPORT{builtin}="blkid --offset=$env{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}"
+# single-session CDs do not have ID_CDROM_MEDIA_SESSION_LAST_OFFSET
+KERNEL=="sr*", ENV{DISK_EJECT_REQUEST}!="?*", ENV{ID_CDROM_MEDIA_TRACK_COUNT_DATA}=="?*", ENV{ID_CDROM_MEDIA_SESSION_LAST_OFFSET}=="", \
+  IMPORT{builtin}="blkid --noraid"
+
+# probe filesystem metadata of disks
+KERNEL!="sr*", IMPORT{builtin}="blkid"
+
+# watch metadata changes by tools closing the device after writing
+KERNEL!="sr*", OPTIONS+="watch"
+
+# by-label/by-uuid links (filesystem metadata)
+ENV{ID_FS_USAGE}=="filesystem|other|crypto", ENV{ID_FS_UUID_ENC}=="?*", SYMLINK+="disk/by-uuid/$env{ID_FS_UUID_ENC}"
+ENV{ID_FS_USAGE}=="filesystem|other", ENV{ID_FS_LABEL_ENC}=="?*", SYMLINK+="disk/by-label/$env{ID_FS_LABEL_ENC}"
+
+# by-id (World Wide Name)
+ENV{DEVTYPE}=="disk", ENV{ID_WWN_WITH_EXTENSION}=="?*", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}"
+ENV{DEVTYPE}=="partition", ENV{ID_WWN_WITH_EXTENSION}=="?*", SYMLINK+="disk/by-id/wwn-$env{ID_WWN_WITH_EXTENSION}-part%n"
+
+# by-partlabel/by-partuuid links (partition metadata)
+ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_ENTRY_UUID}=="?*", SYMLINK+="disk/by-partuuid/$env{ID_PART_ENTRY_UUID}"
+ENV{ID_PART_ENTRY_SCHEME}=="gpt", ENV{ID_PART_ENTRY_NAME}=="?*", SYMLINK+="disk/by-partlabel/$env{ID_PART_ENTRY_NAME}"
+
+LABEL="persistent_storage_end"
diff --git a/rules/75-net-description.rules b/rules/75-net-description.rules
new file mode 100644
index 0000000000..ce57d48e86
--- /dev/null
+++ b/rules/75-net-description.rules
@@ -0,0 +1,14 @@
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="net_end"
+SUBSYSTEM!="net", GOTO="net_end"
+
+SUBSYSTEMS=="usb", ENV{ID_MODEL}=="", IMPORT{builtin}="usb_id"
+SUBSYSTEMS=="usb", IMPORT{builtin}="usb-db"
+SUBSYSTEMS=="usb", ATTRS{idVendor}!="", ATTRS{idProduct}!="", ENV{ID_VENDOR_ID}="$attr{idVendor}", ENV{ID_MODEL_ID}="$attr{idProduct}"
+SUBSYSTEMS=="usb", GOTO="net_end"
+
+SUBSYSTEMS=="pci", IMPORT{builtin}="pci-db"
+SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}"
+
+LABEL="net_end"
diff --git a/rules/75-tty-description.rules b/rules/75-tty-description.rules
new file mode 100644
index 0000000000..2e63e140cb
--- /dev/null
+++ b/rules/75-tty-description.rules
@@ -0,0 +1,14 @@
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="tty_end"
+SUBSYSTEM!="tty", GOTO="tty_end"
+
+SUBSYSTEMS=="usb", ENV{ID_MODEL}=="", IMPORT{builtin}="usb_id"
+SUBSYSTEMS=="usb", IMPORT{builtin}="usb-db"
+SUBSYSTEMS=="usb", ATTRS{idVendor}!="", ATTRS{idProduct}!="", ENV{ID_VENDOR_ID}="$attr{idVendor}", ENV{ID_MODEL_ID}="$attr{idProduct}"
+SUBSYSTEMS=="usb", GOTO="tty_end"
+
+SUBSYSTEMS=="pci", IMPORT{builtin}="pci-db"
+SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}"
+
+LABEL="tty_end"
diff --git a/rules/78-sound-card.rules b/rules/78-sound-card.rules
new file mode 100644
index 0000000000..e564441893
--- /dev/null
+++ b/rules/78-sound-card.rules
@@ -0,0 +1,89 @@
+# do not edit this file, it will be overwritten on update
+
+SUBSYSTEM!="sound", GOTO="sound_end"
+
+ACTION=="add|change", KERNEL=="controlC*", ATTR{../uevent}="change"
+ACTION!="change", GOTO="sound_end"
+
+# Ok, we probably need a little explanation here for what the two lines above
+# are good for.
+#
+# The story goes like this: when ALSA registers a new sound card it emits a
+# series of 'add' events to userspace, for the main card device and for all the
+# child device nodes that belong to it. udev relays those to applications,
+# however only maintains the order between father and child, but not between
+# the siblings. The control device node creation can be used as synchronization
+# point. All other devices that belong to a card are created in the kernel
+# before it. However unfortunately due to the fact that siblings are forwarded
+# out of order by udev this fact is lost to applications.
+#
+# OTOH before an application can open a device it needs to make sure that all
+# its device nodes are completely created and set up.
+#
+# As a workaround for this issue we have added the udev rule above which will
+# generate a 'change' event on the main card device from the 'add' event of the
+# card's control device. Due to the ordering semantics of udev this event will
+# only be relayed after all child devices have finished processing properly.
+# When an application needs to listen for appearing devices it can hence look
+# for 'change' events only, and ignore the actual 'add' events.
+#
+# When the application is initialized at the same time as a device is plugged
+# in it may need to figure out if the 'change' event has already been triggered
+# or not for a card. To find that out we store the flag environment variable
+# SOUND_INITIALIZED on the device which simply tells us if the card 'change'
+# event has already been processed.
+
+KERNEL!="card*", GOTO="sound_end"
+
+ENV{SOUND_INITIALIZED}="1"
+
+SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
+SUBSYSTEMS=="usb", IMPORT{builtin}="usb-db"
+SUBSYSTEMS=="usb", GOTO="skip_pci"
+
+SUBSYSTEMS=="firewire", ATTRS{vendor_name}=="?*", ATTRS{model_name}=="?*", \
+  ENV{ID_BUS}="firewire", ENV{ID_VENDOR}="$attr{vendor_name}", ENV{ID_MODEL}="$attr{model_name}"
+SUBSYSTEMS=="firewire", ATTRS{guid}=="?*", ENV{ID_ID}="firewire-$attr{guid}"
+SUBSYSTEMS=="firewire", GOTO="skip_pci"
+
+
+SUBSYSTEMS=="pci", IMPORT{builtin}="pci-db"
+SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}"
+
+LABEL="skip_pci"
+
+ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="?*", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_USB_INTERFACE_NUM}-$attr{id}"
+ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}-$attr{id}"
+
+IMPORT{builtin}="path_id"
+
+# The values used here for $SOUND_FORM_FACTOR and $SOUND_CLASS should be kept
+# in sync with those defined for PulseAudio's src/pulse/proplist.h
+# PA_PROP_DEVICE_FORM_FACTOR, PA_PROP_DEVICE_CLASS properties.
+
+# If the first PCM device of this card has the pcm class 'modem', then the card is a modem
+ATTR{pcmC%nD0p/pcm_class}=="modem", ENV{SOUND_CLASS}="modem", GOTO="sound_end"
+
+# Identify cards on the internal PCI bus as internal
+SUBSYSTEMS=="pci", DEVPATH=="*/0000:00:??.?/sound/*", ENV{SOUND_FORM_FACTOR}="internal", GOTO="sound_end"
+
+# Devices that also support Image/Video interfaces are most likely webcams
+SUBSYSTEMS=="usb", ENV{ID_USB_INTERFACES}=="*:0e????:*", ENV{SOUND_FORM_FACTOR}="webcam", GOTO="sound_end"
+
+# Matching on the model strings is a bit ugly, I admit
+ENV{ID_MODEL}=="*[Ss]peaker*", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end"
+ENV{ID_MODEL_FROM_DATABASE}=="*[Ss]peaker*", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end"
+
+ENV{ID_MODEL}=="*[Hh]eadphone*", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end"
+ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]eadphone*", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end"
+
+ENV{ID_MODEL}=="*[Hh]eadset*", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end"
+ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]eadset*", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end"
+
+ENV{ID_MODEL}=="*[Hh]andset*", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end"
+ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]andset*", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end"
+
+ENV{ID_MODEL}=="*[Mm]icrophone*", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end"
+ENV{ID_MODEL_FROM_DATABASE}=="*[Mm]icrophone*", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end"
+
+LABEL="sound_end"
diff --git a/rules/80-drivers.rules b/rules/80-drivers.rules
new file mode 100644
index 0000000000..38ebfeb0e6
--- /dev/null
+++ b/rules/80-drivers.rules
@@ -0,0 +1,12 @@
+# do not edit this file, it will be overwritten on update
+
+ACTION=="remove", GOTO="drivers_end"
+
+DRIVER!="?*", ENV{MODALIAS}=="?*", IMPORT{builtin}="kmod load $env{MODALIAS}"
+SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="SD", IMPORT{builtin}="kmod load tifm_sd"
+SUBSYSTEM=="tifm", ENV{TIFM_CARD_TYPE}=="MS", IMPORT{builtin}="kmod load tifm_ms"
+SUBSYSTEM=="memstick", IMPORT{builtin}="kmod load ms_block mspro_block"
+SUBSYSTEM=="i2o", IMPORT{builtin}="kmod load i2o_block"
+SUBSYSTEM=="module", KERNEL=="parport_pc", IMPORT{builtin}="kmod load ppdev"
+
+LABEL="drivers_end"
diff --git a/rules/95-udev-late.rules b/rules/95-udev-late.rules
new file mode 100644
index 0000000000..eca0faa5c5
--- /dev/null
+++ b/rules/95-udev-late.rules
@@ -0,0 +1,4 @@
+# do not edit this file, it will be overwritten on update
+
+# run a command on remove events
+ACTION=="remove", ENV{REMOVE_CMD}!="", RUN+="$env{REMOVE_CMD}"
diff --git a/rules/99-systemd.rules.in b/rules/99-systemd.rules.in
new file mode 100644
index 0000000000..d306f71b63
--- /dev/null
+++ b/rules/99-systemd.rules.in
@@ -0,0 +1,55 @@
+#  This file is part of systemd.
+#
+#  systemd is free software; you can redistribute it and/or modify it
+#  under the terms of the GNU General Public License as published by
+#  the Free Software Foundation; either version 2 of the License, or
+#  (at your option) any later version.
+
+ACTION=="remove", GOTO="systemd_end"
+
+SUBSYSTEM=="tty", KERNEL=="tty[0-9]|tty1[0-2]", TAG+="systemd"
+SUBSYSTEM=="tty", KERNEL=="tty[a-zA-Z]*|hvc*|xvc*|hvsi*", TAG+="systemd"
+
+KERNEL=="vport*", TAG+="systemd"
+
+SUBSYSTEM=="block", KERNEL!="ram*|loop*", TAG+="systemd"
+SUBSYSTEM=="block", KERNEL!="ram*|loop*", ENV{DM_UDEV_DISABLE_OTHER_RULES_FLAG}=="1", ENV{SYSTEMD_READY}="0"
+
+# Ignore encrypted devices with no identified superblock on it, since
+# we are probably still calling mke2fs or mkswap on it.
+
+SUBSYSTEM=="block", KERNEL!="ram*|loop*", ENV{DM_UUID}=="CRYPT-*", ENV{ID_PART_TABLE_TYPE}=="", ENV{ID_FS_USAGE}=="", ENV{SYSTEMD_READY}="0"
+
+# We need a hardware independent way to identify network devices. We
+# use the /sys/subsystem path for this. Current vanilla kernels don't
+# actually support that hierarchy right now, however upcoming kernels
+# will. HAL and udev internally support /sys/subsystem already, hence
+# it should be safe to use this here, too. This is mostly just an
+# identification string for systemd, so whether the path actually is
+# accessible or not does not matter as long as it is unique and in the
+# filesystem namespace.
+#
+# http://git.kernel.org/?p=linux/hotplug/udev.git;a=blob;f=libudev/libudev-enumerate.c;h=da831449dcaf5e936a14409e8e68ab12d30a98e2;hb=HEAD#l742
+
+SUBSYSTEM=="net", KERNEL!="lo", TAG+="systemd", ENV{SYSTEMD_ALIAS}="/sys/subsystem/net/devices/$name"
+SUBSYSTEM=="bluetooth", TAG+="systemd", ENV{SYSTEMD_ALIAS}="/sys/subsystem/bluetooth/devices/%k"
+
+SUBSYSTEM=="bluetooth", TAG+="systemd", ENV{SYSTEMD_WANTS}="bluetooth.target"
+ENV{ID_SMARTCARD_READER}=="*?", TAG+="systemd", ENV{SYSTEMD_WANTS}="smartcard.target"
+SUBSYSTEM=="sound", KERNEL=="card*", TAG+="systemd", ENV{SYSTEMD_WANTS}="sound.target"
+
+SUBSYSTEM=="printer", TAG+="systemd", ENV{SYSTEMD_WANTS}="printer.target"
+SUBSYSTEM=="usb", KERNEL=="lp*", TAG+="systemd", ENV{SYSTEMD_WANTS}="printer.target"
+SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", TAG+="systemd", ENV{SYSTEMD_WANTS}="printer.target"
+
+# Apply sysctl variables to network devices (and only to those) as they appear.
+
+SUBSYSTEM=="net", KERNEL!="lo", RUN+="@rootlibexecdir@/systemd-sysctl --prefix=/proc/sys/net/ipv4/conf/$name --prefix=/proc/sys/net/ipv4/neigh/$name --prefix=/proc/sys/net/ipv6/conf/$name --prefix=/proc/sys/net/ipv6/neigh/$name"
+
+# Asynchronously mount file systems implemented by these modules as
+# soon as they are loaded.
+
+SUBSYSTEM=="module", KERNEL=="fuse", ACTION=="add", TAG+="systemd", ENV{SYSTEMD_WANTS}="sys-fs-fuse-connections.mount"
+SUBSYSTEM=="module", KERNEL=="configfs", ACTION=="add", TAG+="systemd", ENV{SYSTEMD_WANTS}="sys-kernel-config.mount"
+
+LABEL="systemd_end"