diff options
author | Luke Shumaker <lukeshu@sbcglobal.net> | 2016-07-27 21:21:19 -0400 |
---|---|---|
committer | Luke Shumaker <lukeshu@sbcglobal.net> | 2016-07-27 21:21:19 -0400 |
commit | 38b93f33c4130a69b6ff1777ee59511f601abff6 (patch) | |
tree | 4f51d827b4e7598b3ab46f86a3c1ab5e03782700 /src/grp-udev/scsi_id | |
parent | a9330854c56ccba7b6ce4bdb046ae7778b329622 (diff) |
./move.sh
Diffstat (limited to 'src/grp-udev/scsi_id')
-rw-r--r-- | src/grp-udev/scsi_id/.gitignore | 1 | ||||
-rw-r--r-- | src/grp-udev/scsi_id/Makefile | 41 | ||||
-rw-r--r-- | src/grp-udev/scsi_id/README | 4 | ||||
-rw-r--r-- | src/grp-udev/scsi_id/scsi.h | 99 | ||||
-rw-r--r-- | src/grp-udev/scsi_id/scsi_id.c | 625 | ||||
-rw-r--r-- | src/grp-udev/scsi_id/scsi_id.h | 75 | ||||
-rw-r--r-- | src/grp-udev/scsi_id/scsi_serial.c | 964 |
7 files changed, 1809 insertions, 0 deletions
diff --git a/src/grp-udev/scsi_id/.gitignore b/src/grp-udev/scsi_id/.gitignore new file mode 100644 index 0000000000..6aebddd809 --- /dev/null +++ b/src/grp-udev/scsi_id/.gitignore @@ -0,0 +1 @@ +scsi_id_version.h diff --git a/src/grp-udev/scsi_id/Makefile b/src/grp-udev/scsi_id/Makefile new file mode 100644 index 0000000000..7064a864f7 --- /dev/null +++ b/src/grp-udev/scsi_id/Makefile @@ -0,0 +1,41 @@ +# -*- Mode: makefile; indent-tabs-mode: t -*- +# +# This file is part of systemd. +# +# Copyright 2010-2012 Lennart Poettering +# Copyright 2010-2012 Kay Sievers +# Copyright 2013 Zbigniew Jędrzejewski-Szmek +# Copyright 2013 David Strauss +# Copyright 2016 Luke Shumaker +# +# systemd is free software; you can redistribute it and/or modify it +# under the terms of the GNU Lesser General Public License as published by +# the Free Software Foundation; either version 2.1 of the License, or +# (at your option) any later version. +# +# systemd is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# Lesser General Public License for more details. +# +# You should have received a copy of the GNU Lesser General Public License +# along with systemd; If not, see <http://www.gnu.org/licenses/>. +include $(dir $(lastword $(MAKEFILE_LIST)))/../../../config.mk +include $(topsrcdir)/build-aux/Makefile.head.mk + +scsi_id_SOURCES =\ + src/udev/scsi_id/scsi_id.c \ + src/udev/scsi_id/scsi_serial.c \ + src/udev/scsi_id/scsi.h \ + src/udev/scsi_id/scsi_id.h + +scsi_id_LDADD = \ + libshared.la + +udevlibexec_PROGRAMS += \ + scsi_id + +EXTRA_DIST += \ + src/udev/scsi_id/README + +include $(topsrcdir)/build-aux/Makefile.tail.mk diff --git a/src/grp-udev/scsi_id/README b/src/grp-udev/scsi_id/README new file mode 100644 index 0000000000..9cfe73991c --- /dev/null +++ b/src/grp-udev/scsi_id/README @@ -0,0 +1,4 @@ +scsi_id - generate a SCSI unique identifier for a given SCSI device + +Please send questions, comments or patches to <patmans@us.ibm.com> or +<linux-hotplug-devel@lists.sourceforge.net>. diff --git a/src/grp-udev/scsi_id/scsi.h b/src/grp-udev/scsi_id/scsi.h new file mode 100644 index 0000000000..a27a84a40a --- /dev/null +++ b/src/grp-udev/scsi_id/scsi.h @@ -0,0 +1,99 @@ +#pragma once + +/* + * scsi.h + * + * General scsi and linux scsi specific defines and structs. + * + * Copyright (C) IBM Corp. 2003 + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation version 2 of the License. + */ + +#include <scsi/scsi.h> + +struct scsi_ioctl_command { + unsigned int inlen; /* excluding scsi command length */ + unsigned int outlen; + unsigned char data[1]; + /* on input, scsi command starts here then opt. data */ +}; + +/* + * Default 5 second timeout + */ +#define DEF_TIMEOUT 5000 + +#define SENSE_BUFF_LEN 32 + +/* + * The request buffer size passed to the SCSI INQUIRY commands, use 254, + * as this is a nice value for some devices, especially some of the usb + * mass storage devices. + */ +#define SCSI_INQ_BUFF_LEN 254 + +/* + * SCSI INQUIRY vendor and model (really product) lengths. + */ +#define VENDOR_LENGTH 8 +#define MODEL_LENGTH 16 + +#define INQUIRY_CMD 0x12 +#define INQUIRY_CMDLEN 6 + +/* + * INQUIRY VPD page 0x83 identifier descriptor related values. Reference the + * SCSI Primary Commands specification for details. + */ + +/* + * id type values of id descriptors. These are assumed to fit in 4 bits. + */ +#define SCSI_ID_VENDOR_SPECIFIC 0 +#define SCSI_ID_T10_VENDOR 1 +#define SCSI_ID_EUI_64 2 +#define SCSI_ID_NAA 3 +#define SCSI_ID_RELPORT 4 +#define SCSI_ID_TGTGROUP 5 +#define SCSI_ID_LUNGROUP 6 +#define SCSI_ID_MD5 7 +#define SCSI_ID_NAME 8 + +/* + * Supported NAA values. These fit in 4 bits, so the "don't care" value + * cannot conflict with real values. + */ +#define SCSI_ID_NAA_DONT_CARE 0xff +#define SCSI_ID_NAA_IEEE_REG 0x05 +#define SCSI_ID_NAA_IEEE_REG_EXTENDED 0x06 + +/* + * Supported Code Set values. + */ +#define SCSI_ID_BINARY 1 +#define SCSI_ID_ASCII 2 + +struct scsi_id_search_values { + u_char id_type; + u_char naa_type; + u_char code_set; +}; + +/* + * Following are the "true" SCSI status codes. Linux has traditionally + * used a 1 bit right and masked version of these. So now CHECK_CONDITION + * and friends (in <scsi/scsi.h>) are deprecated. + */ +#define SCSI_CHECK_CONDITION 0x02 +#define SCSI_CONDITION_MET 0x04 +#define SCSI_BUSY 0x08 +#define SCSI_IMMEDIATE 0x10 +#define SCSI_IMMEDIATE_CONDITION_MET 0x14 +#define SCSI_RESERVATION_CONFLICT 0x18 +#define SCSI_COMMAND_TERMINATED 0x22 +#define SCSI_TASK_SET_FULL 0x28 +#define SCSI_ACA_ACTIVE 0x30 +#define SCSI_TASK_ABORTED 0x40 diff --git a/src/grp-udev/scsi_id/scsi_id.c b/src/grp-udev/scsi_id/scsi_id.c new file mode 100644 index 0000000000..4655691642 --- /dev/null +++ b/src/grp-udev/scsi_id/scsi_id.c @@ -0,0 +1,625 @@ +/* + * Copyright (C) IBM Corp. 2003 + * Copyright (C) SUSE Linux Products GmbH, 2006 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <ctype.h> +#include <errno.h> +#include <fcntl.h> +#include <getopt.h> +#include <signal.h> +#include <stdarg.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/stat.h> +#include <unistd.h> + +#include "libudev.h" + +#include "fd-util.h" +#include "libudev-private.h" +#include "scsi_id.h" +#include "string-util.h" +#include "udev-util.h" + +static const struct option options[] = { + { "device", required_argument, NULL, 'd' }, + { "config", required_argument, NULL, 'f' }, + { "page", required_argument, NULL, 'p' }, + { "blacklisted", no_argument, NULL, 'b' }, + { "whitelisted", no_argument, NULL, 'g' }, + { "replace-whitespace", no_argument, NULL, 'u' }, + { "sg-version", required_argument, NULL, 's' }, + { "verbose", no_argument, NULL, 'v' }, + { "version", no_argument, NULL, 'V' }, /* don't advertise -V */ + { "export", no_argument, NULL, 'x' }, + { "help", no_argument, NULL, 'h' }, + {} +}; + +static bool all_good = false; +static bool dev_specified = false; +static char config_file[MAX_PATH_LEN] = "/etc/scsi_id.config"; +static enum page_code default_page_code = PAGE_UNSPECIFIED; +static int sg_version = 4; +static bool reformat_serial = false; +static bool export = false; +static char vendor_str[64]; +static char model_str[64]; +static char vendor_enc_str[256]; +static char model_enc_str[256]; +static char revision_str[16]; +static char type_str[16]; + +static void set_type(const char *from, char *to, size_t len) +{ + int type_num; + char *eptr; + const char *type = "generic"; + + type_num = strtoul(from, &eptr, 0); + if (eptr != from) { + switch (type_num) { + case 0: + type = "disk"; + break; + case 1: + type = "tape"; + break; + case 4: + type = "optical"; + break; + case 5: + type = "cd"; + break; + case 7: + type = "optical"; + break; + case 0xe: + type = "disk"; + break; + case 0xf: + type = "optical"; + break; + default: + break; + } + } + strscpy(to, len, type); +} + +/* + * get_value: + * + * buf points to an '=' followed by a quoted string ("foo") or a string ending + * with a space or ','. + * + * Return a pointer to the NUL terminated string, returns NULL if no + * matches. + */ +static char *get_value(char **buffer) +{ + static const char *quote_string = "\"\n"; + static const char *comma_string = ",\n"; + char *val; + const char *end; + + if (**buffer == '"') { + /* + * skip leading quote, terminate when quote seen + */ + (*buffer)++; + end = quote_string; + } else { + end = comma_string; + } + val = strsep(buffer, end); + if (val && end == quote_string) + /* + * skip trailing quote + */ + (*buffer)++; + + while (isspace(**buffer)) + (*buffer)++; + + return val; +} + +static int argc_count(char *opts) +{ + int i = 0; + while (*opts != '\0') + if (*opts++ == ' ') + i++; + return i; +} + +/* + * get_file_options: + * + * If vendor == NULL, find a line in the config file with only "OPTIONS="; + * if vendor and model are set find the first OPTIONS line in the config + * file that matches. Set argc and argv to match the OPTIONS string. + * + * vendor and model can end in '\n'. + */ +static int get_file_options(struct udev *udev, + const char *vendor, const char *model, + int *argc, char ***newargv) +{ + char *buffer; + _cleanup_fclose_ FILE *f; + char *buf; + char *str1; + char *vendor_in, *model_in, *options_in; /* read in from file */ + int lineno; + int c; + int retval = 0; + + f = fopen(config_file, "re"); + if (f == NULL) { + if (errno == ENOENT) + return 1; + else { + log_error_errno(errno, "can't open %s: %m", config_file); + return -1; + } + } + + /* + * Allocate a buffer rather than put it on the stack so we can + * keep it around to parse any options (any allocated newargv + * points into this buffer for its strings). + */ + buffer = malloc(MAX_BUFFER_LEN); + if (!buffer) + return log_oom(); + + *newargv = NULL; + lineno = 0; + for (;;) { + vendor_in = model_in = options_in = NULL; + + buf = fgets(buffer, MAX_BUFFER_LEN, f); + if (buf == NULL) + break; + lineno++; + if (buf[strlen(buffer) - 1] != '\n') { + log_error("Config file line %d too long", lineno); + break; + } + + while (isspace(*buf)) + buf++; + + /* blank or all whitespace line */ + if (*buf == '\0') + continue; + + /* comment line */ + if (*buf == '#') + continue; + + str1 = strsep(&buf, "="); + if (str1 && strcaseeq(str1, "VENDOR")) { + str1 = get_value(&buf); + if (!str1) { + retval = log_oom(); + break; + } + vendor_in = str1; + + str1 = strsep(&buf, "="); + if (str1 && strcaseeq(str1, "MODEL")) { + str1 = get_value(&buf); + if (!str1) { + retval = log_oom(); + break; + } + model_in = str1; + str1 = strsep(&buf, "="); + } + } + + if (str1 && strcaseeq(str1, "OPTIONS")) { + str1 = get_value(&buf); + if (!str1) { + retval = log_oom(); + break; + } + options_in = str1; + } + + /* + * Only allow: [vendor=foo[,model=bar]]options=stuff + */ + if (!options_in || (!vendor_in && model_in)) { + log_error("Error parsing config file line %d '%s'", lineno, buffer); + retval = -1; + break; + } + if (vendor == NULL) { + if (vendor_in == NULL) + break; + } else if (vendor_in && + strneq(vendor, vendor_in, strlen(vendor_in)) && + (!model_in || + (strneq(model, model_in, strlen(model_in))))) { + /* + * Matched vendor and optionally model. + * + * Note: a short vendor_in or model_in can + * give a partial match (that is FOO + * matches FOOBAR). + */ + break; + } + } + + if (retval == 0) { + if (vendor_in != NULL || model_in != NULL || + options_in != NULL) { + /* + * Something matched. Allocate newargv, and store + * values found in options_in. + */ + strcpy(buffer, options_in); + c = argc_count(buffer) + 2; + *newargv = calloc(c, sizeof(**newargv)); + if (!*newargv) + retval = log_oom(); + else { + *argc = c; + c = 0; + /* + * argv[0] at 0 is skipped by getopt, but + * store the buffer address there for + * later freeing + */ + (*newargv)[c] = buffer; + for (c = 1; c < *argc; c++) + (*newargv)[c] = strsep(&buffer, " \t"); + } + } else { + /* No matches */ + retval = 1; + } + } + if (retval != 0) + free(buffer); + return retval; +} + +static void help(void) { + printf("Usage: %s [OPTION...] DEVICE\n\n" + "SCSI device identification.\n\n" + " -h --help Print this message\n" + " --version Print version of the program\n\n" + " -d --device= Device node for SG_IO commands\n" + " -f --config= Location of config file\n" + " -p --page=0x80|0x83|pre-spc3-83 SCSI page (0x80, 0x83, pre-spc3-83)\n" + " -s --sg-version=3|4 Use SGv3 or SGv4\n" + " -b --blacklisted Treat device as blacklisted\n" + " -g --whitelisted Treat device as whitelisted\n" + " -u --replace-whitespace Replace all whitespace by underscores\n" + " -v --verbose Verbose logging\n" + " -x --export Print values as environment keys\n" + , program_invocation_short_name); + +} + +static int set_options(struct udev *udev, + int argc, char **argv, + char *maj_min_dev) +{ + int option; + + /* + * optind is a global extern used by getopt. Since we can call + * set_options twice (once for command line, and once for config + * file) we have to reset this back to 1. + */ + optind = 1; + while ((option = getopt_long(argc, argv, "d:f:gp:uvVxh", options, NULL)) >= 0) + switch (option) { + case 'b': + all_good = false; + break; + + case 'd': + dev_specified = true; + strscpy(maj_min_dev, MAX_PATH_LEN, optarg); + break; + + case 'f': + strscpy(config_file, MAX_PATH_LEN, optarg); + break; + + case 'g': + all_good = true; + break; + + case 'h': + help(); + exit(0); + + case 'p': + if (streq(optarg, "0x80")) + default_page_code = PAGE_80; + else if (streq(optarg, "0x83")) + default_page_code = PAGE_83; + else if (streq(optarg, "pre-spc3-83")) + default_page_code = PAGE_83_PRE_SPC3; + else { + log_error("Unknown page code '%s'", optarg); + return -1; + } + break; + + case 's': + sg_version = atoi(optarg); + if (sg_version < 3 || sg_version > 4) { + log_error("Unknown SG version '%s'", optarg); + return -1; + } + break; + + case 'u': + reformat_serial = true; + break; + + case 'v': + log_set_target(LOG_TARGET_CONSOLE); + log_set_max_level(LOG_DEBUG); + log_open(); + break; + + case 'V': + printf("%s\n", VERSION); + exit(0); + + case 'x': + export = true; + break; + + case '?': + return -1; + + default: + assert_not_reached("Unknown option"); + } + + if (optind < argc && !dev_specified) { + dev_specified = true; + strscpy(maj_min_dev, MAX_PATH_LEN, argv[optind]); + } + + return 0; +} + +static int per_dev_options(struct udev *udev, + struct scsi_id_device *dev_scsi, int *good_bad, int *page_code) +{ + int retval; + int newargc; + char **newargv = NULL; + int option; + + *good_bad = all_good; + *page_code = default_page_code; + + retval = get_file_options(udev, vendor_str, model_str, &newargc, &newargv); + + optind = 1; /* reset this global extern */ + while (retval == 0) { + option = getopt_long(newargc, newargv, "bgp:", options, NULL); + if (option == -1) + break; + + switch (option) { + case 'b': + *good_bad = 0; + break; + + case 'g': + *good_bad = 1; + break; + + case 'p': + if (streq(optarg, "0x80")) { + *page_code = PAGE_80; + } else if (streq(optarg, "0x83")) { + *page_code = PAGE_83; + } else if (streq(optarg, "pre-spc3-83")) { + *page_code = PAGE_83_PRE_SPC3; + } else { + log_error("Unknown page code '%s'", optarg); + retval = -1; + } + break; + + default: + log_error("Unknown or bad option '%c' (0x%x)", option, option); + retval = -1; + break; + } + } + + if (newargv) { + free(newargv[0]); + free(newargv); + } + return retval; +} + +static int set_inq_values(struct udev *udev, struct scsi_id_device *dev_scsi, const char *path) +{ + int retval; + + dev_scsi->use_sg = sg_version; + + retval = scsi_std_inquiry(udev, dev_scsi, path); + if (retval) + return retval; + + udev_util_encode_string(dev_scsi->vendor, vendor_enc_str, sizeof(vendor_enc_str)); + udev_util_encode_string(dev_scsi->model, model_enc_str, sizeof(model_enc_str)); + + util_replace_whitespace(dev_scsi->vendor, vendor_str, sizeof(vendor_str)); + util_replace_chars(vendor_str, NULL); + util_replace_whitespace(dev_scsi->model, model_str, sizeof(model_str)); + util_replace_chars(model_str, NULL); + set_type(dev_scsi->type, type_str, sizeof(type_str)); + util_replace_whitespace(dev_scsi->revision, revision_str, sizeof(revision_str)); + util_replace_chars(revision_str, NULL); + return 0; +} + +/* + * scsi_id: try to get an id, if one is found, printf it to stdout. + * returns a value passed to exit() - 0 if printed an id, else 1. + */ +static int scsi_id(struct udev *udev, char *maj_min_dev) +{ + struct scsi_id_device dev_scsi = {}; + int good_dev; + int page_code; + int retval = 0; + + if (set_inq_values(udev, &dev_scsi, maj_min_dev) < 0) { + retval = 1; + goto out; + } + + /* get per device (vendor + model) options from the config file */ + per_dev_options(udev, &dev_scsi, &good_dev, &page_code); + if (!good_dev) { + retval = 1; + goto out; + } + + /* read serial number from mode pages (no values for optical drives) */ + scsi_get_serial(udev, &dev_scsi, maj_min_dev, page_code, MAX_SERIAL_LEN); + + if (export) { + char serial_str[MAX_SERIAL_LEN]; + + printf("ID_SCSI=1\n"); + printf("ID_VENDOR=%s\n", vendor_str); + printf("ID_VENDOR_ENC=%s\n", vendor_enc_str); + printf("ID_MODEL=%s\n", model_str); + printf("ID_MODEL_ENC=%s\n", model_enc_str); + printf("ID_REVISION=%s\n", revision_str); + printf("ID_TYPE=%s\n", type_str); + if (dev_scsi.serial[0] != '\0') { + util_replace_whitespace(dev_scsi.serial, serial_str, sizeof(serial_str)); + util_replace_chars(serial_str, NULL); + printf("ID_SERIAL=%s\n", serial_str); + util_replace_whitespace(dev_scsi.serial_short, serial_str, sizeof(serial_str)); + util_replace_chars(serial_str, NULL); + printf("ID_SERIAL_SHORT=%s\n", serial_str); + } + if (dev_scsi.wwn[0] != '\0') { + printf("ID_WWN=0x%s\n", dev_scsi.wwn); + if (dev_scsi.wwn_vendor_extension[0] != '\0') { + printf("ID_WWN_VENDOR_EXTENSION=0x%s\n", dev_scsi.wwn_vendor_extension); + printf("ID_WWN_WITH_EXTENSION=0x%s%s\n", dev_scsi.wwn, dev_scsi.wwn_vendor_extension); + } else + printf("ID_WWN_WITH_EXTENSION=0x%s\n", dev_scsi.wwn); + } + if (dev_scsi.tgpt_group[0] != '\0') + printf("ID_TARGET_PORT=%s\n", dev_scsi.tgpt_group); + if (dev_scsi.unit_serial_number[0] != '\0') + printf("ID_SCSI_SERIAL=%s\n", dev_scsi.unit_serial_number); + goto out; + } + + if (dev_scsi.serial[0] == '\0') { + retval = 1; + goto out; + } + + if (reformat_serial) { + char serial_str[MAX_SERIAL_LEN]; + + util_replace_whitespace(dev_scsi.serial, serial_str, sizeof(serial_str)); + util_replace_chars(serial_str, NULL); + printf("%s\n", serial_str); + goto out; + } + + printf("%s\n", dev_scsi.serial); +out: + return retval; +} + +int main(int argc, char **argv) +{ + _cleanup_udev_unref_ struct udev *udev; + int retval = 0; + char maj_min_dev[MAX_PATH_LEN]; + int newargc; + char **newargv = NULL; + + log_parse_environment(); + log_open(); + + udev = udev_new(); + if (udev == NULL) + goto exit; + + /* + * Get config file options. + */ + retval = get_file_options(udev, NULL, NULL, &newargc, &newargv); + if (retval < 0) { + retval = 1; + goto exit; + } + if (retval == 0) { + assert(newargv); + + if (set_options(udev, newargc, newargv, maj_min_dev) < 0) { + retval = 2; + goto exit; + } + } + + /* + * Get command line options (overriding any config file settings). + */ + if (set_options(udev, argc, argv, maj_min_dev) < 0) + exit(1); + + if (!dev_specified) { + log_error("No device specified."); + retval = 1; + goto exit; + } + + retval = scsi_id(udev, maj_min_dev); + +exit: + if (newargv) { + free(newargv[0]); + free(newargv); + } + log_close(); + return retval; +} diff --git a/src/grp-udev/scsi_id/scsi_id.h b/src/grp-udev/scsi_id/scsi_id.h new file mode 100644 index 0000000000..5c2e1c28ee --- /dev/null +++ b/src/grp-udev/scsi_id/scsi_id.h @@ -0,0 +1,75 @@ +#pragma once + +/* + * Copyright (C) IBM Corp. 2003 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#define MAX_PATH_LEN 512 + +/* + * MAX_ATTR_LEN: maximum length of the result of reading a sysfs + * attribute. + */ +#define MAX_ATTR_LEN 256 + +/* + * MAX_SERIAL_LEN: the maximum length of the serial number, including + * added prefixes such as vendor and product (model) strings. + */ +#define MAX_SERIAL_LEN 256 + +/* + * MAX_BUFFER_LEN: maximum buffer size and line length used while reading + * the config file. + */ +#define MAX_BUFFER_LEN 256 + +struct scsi_id_device { + char vendor[9]; + char model[17]; + char revision[5]; + char type[33]; + char kernel[64]; + char serial[MAX_SERIAL_LEN]; + char serial_short[MAX_SERIAL_LEN]; + int use_sg; + + /* Always from page 0x80 e.g. 'B3G1P8500RWT' - may not be unique */ + char unit_serial_number[MAX_SERIAL_LEN]; + + /* NULs if not set - otherwise hex encoding using lower-case e.g. '50014ee0016eb572' */ + char wwn[17]; + + /* NULs if not set - otherwise hex encoding using lower-case e.g. '0xe00000d80000' */ + char wwn_vendor_extension[17]; + + /* NULs if not set - otherwise decimal number */ + char tgpt_group[8]; +}; + +int scsi_std_inquiry(struct udev *udev, struct scsi_id_device *dev_scsi, const char *devname); +int scsi_get_serial(struct udev *udev, struct scsi_id_device *dev_scsi, const char *devname, + int page_code, int len); + +/* + * Page code values. + */ +enum page_code { + PAGE_83_PRE_SPC3 = -0x83, + PAGE_UNSPECIFIED = 0x00, + PAGE_80 = 0x80, + PAGE_83 = 0x83, +}; diff --git a/src/grp-udev/scsi_id/scsi_serial.c b/src/grp-udev/scsi_id/scsi_serial.c new file mode 100644 index 0000000000..e079e28698 --- /dev/null +++ b/src/grp-udev/scsi_id/scsi_serial.c @@ -0,0 +1,964 @@ +/* + * Copyright (C) IBM Corp. 2003 + * + * Author: Patrick Mansfield<patmans@us.ibm.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <errno.h> +#include <fcntl.h> +#include <inttypes.h> +#include <linux/bsg.h> +#include <linux/types.h> +#include <scsi/scsi.h> +#include <scsi/sg.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <sys/ioctl.h> +#include <sys/stat.h> +#include <sys/types.h> +#include <time.h> +#include <unistd.h> + +#include "libudev.h" + +#include "libudev-private.h" +#include "random-util.h" +#include "scsi.h" +#include "scsi_id.h" +#include "string-util.h" + +/* + * A priority based list of id, naa, and binary/ascii for the identifier + * descriptor in VPD page 0x83. + * + * Brute force search for a match starting with the first value in the + * following id_search_list. This is not a performance issue, since there + * is normally one or some small number of descriptors. + */ +static const struct scsi_id_search_values id_search_list[] = { + { SCSI_ID_TGTGROUP, SCSI_ID_NAA_DONT_CARE, SCSI_ID_BINARY }, + { SCSI_ID_NAA, SCSI_ID_NAA_IEEE_REG_EXTENDED, SCSI_ID_BINARY }, + { SCSI_ID_NAA, SCSI_ID_NAA_IEEE_REG_EXTENDED, SCSI_ID_ASCII }, + { SCSI_ID_NAA, SCSI_ID_NAA_IEEE_REG, SCSI_ID_BINARY }, + { SCSI_ID_NAA, SCSI_ID_NAA_IEEE_REG, SCSI_ID_ASCII }, + /* + * Devices already exist using NAA values that are now marked + * reserved. These should not conflict with other values, or it is + * a bug in the device. As long as we find the IEEE extended one + * first, we really don't care what other ones are used. Using + * don't care here means that a device that returns multiple + * non-IEEE descriptors in a random order will get different + * names. + */ + { SCSI_ID_NAA, SCSI_ID_NAA_DONT_CARE, SCSI_ID_BINARY }, + { SCSI_ID_NAA, SCSI_ID_NAA_DONT_CARE, SCSI_ID_ASCII }, + { SCSI_ID_EUI_64, SCSI_ID_NAA_DONT_CARE, SCSI_ID_BINARY }, + { SCSI_ID_EUI_64, SCSI_ID_NAA_DONT_CARE, SCSI_ID_ASCII }, + { SCSI_ID_T10_VENDOR, SCSI_ID_NAA_DONT_CARE, SCSI_ID_BINARY }, + { SCSI_ID_T10_VENDOR, SCSI_ID_NAA_DONT_CARE, SCSI_ID_ASCII }, + { SCSI_ID_VENDOR_SPECIFIC, SCSI_ID_NAA_DONT_CARE, SCSI_ID_BINARY }, + { SCSI_ID_VENDOR_SPECIFIC, SCSI_ID_NAA_DONT_CARE, SCSI_ID_ASCII }, +}; + +static const char hex_str[]="0123456789abcdef"; + +/* + * Values returned in the result/status, only the ones used by the code + * are used here. + */ + +#define DID_NO_CONNECT 0x01 /* Unable to connect before timeout */ +#define DID_BUS_BUSY 0x02 /* Bus remain busy until timeout */ +#define DID_TIME_OUT 0x03 /* Timed out for some other reason */ +#define DRIVER_TIMEOUT 0x06 +#define DRIVER_SENSE 0x08 /* Sense_buffer has been set */ + +/* The following "category" function returns one of the following */ +#define SG_ERR_CAT_CLEAN 0 /* No errors or other information */ +#define SG_ERR_CAT_MEDIA_CHANGED 1 /* interpreted from sense buffer */ +#define SG_ERR_CAT_RESET 2 /* interpreted from sense buffer */ +#define SG_ERR_CAT_TIMEOUT 3 +#define SG_ERR_CAT_RECOVERED 4 /* Successful command after recovered err */ +#define SG_ERR_CAT_NOTSUPPORTED 5 /* Illegal / unsupported command */ +#define SG_ERR_CAT_SENSE 98 /* Something else in the sense buffer */ +#define SG_ERR_CAT_OTHER 99 /* Some other error/warning */ + +static int do_scsi_page80_inquiry(struct udev *udev, + struct scsi_id_device *dev_scsi, int fd, + char *serial, char *serial_short, int max_len); + +static int sg_err_category_new(struct udev *udev, + int scsi_status, int msg_status, int + host_status, int driver_status, const + unsigned char *sense_buffer, int sb_len) +{ + scsi_status &= 0x7e; + + /* + * XXX change to return only two values - failed or OK. + */ + + if (!scsi_status && !host_status && !driver_status) + return SG_ERR_CAT_CLEAN; + + if ((scsi_status == SCSI_CHECK_CONDITION) || + (scsi_status == SCSI_COMMAND_TERMINATED) || + ((driver_status & 0xf) == DRIVER_SENSE)) { + if (sense_buffer && (sb_len > 2)) { + int sense_key; + unsigned char asc; + + if (sense_buffer[0] & 0x2) { + sense_key = sense_buffer[1] & 0xf; + asc = sense_buffer[2]; + } else { + sense_key = sense_buffer[2] & 0xf; + asc = (sb_len > 12) ? sense_buffer[12] : 0; + } + + if (sense_key == RECOVERED_ERROR) + return SG_ERR_CAT_RECOVERED; + else if (sense_key == UNIT_ATTENTION) { + if (0x28 == asc) + return SG_ERR_CAT_MEDIA_CHANGED; + if (0x29 == asc) + return SG_ERR_CAT_RESET; + } else if (sense_key == ILLEGAL_REQUEST) + return SG_ERR_CAT_NOTSUPPORTED; + } + return SG_ERR_CAT_SENSE; + } + if (host_status) { + if ((host_status == DID_NO_CONNECT) || + (host_status == DID_BUS_BUSY) || + (host_status == DID_TIME_OUT)) + return SG_ERR_CAT_TIMEOUT; + } + if (driver_status) { + if (driver_status == DRIVER_TIMEOUT) + return SG_ERR_CAT_TIMEOUT; + } + return SG_ERR_CAT_OTHER; +} + +static int sg_err_category3(struct udev *udev, struct sg_io_hdr *hp) +{ + return sg_err_category_new(udev, + hp->status, hp->msg_status, + hp->host_status, hp->driver_status, + hp->sbp, hp->sb_len_wr); +} + +static int sg_err_category4(struct udev *udev, struct sg_io_v4 *hp) +{ + return sg_err_category_new(udev, hp->device_status, 0, + hp->transport_status, hp->driver_status, + (unsigned char *)(uintptr_t)hp->response, + hp->response_len); +} + +static int scsi_dump_sense(struct udev *udev, + struct scsi_id_device *dev_scsi, + unsigned char *sense_buffer, int sb_len) +{ + int s; + int code; + int sense_class; + int sense_key; + int asc, ascq; +#ifdef DUMP_SENSE + char out_buffer[256]; + int i, j; +#endif + + /* + * Figure out and print the sense key, asc and ascq. + * + * If you want to suppress these for a particular drive model, add + * a black list entry in the scsi_id config file. + * + * XXX We probably need to: lookup the sense/asc/ascq in a retry + * table, and if found return 1 (after dumping the sense, asc, and + * ascq). So, if/when we get something like a power on/reset, + * we'll retry the command. + */ + + if (sb_len < 1) { + log_debug("%s: sense buffer empty", dev_scsi->kernel); + return -1; + } + + sense_class = (sense_buffer[0] >> 4) & 0x07; + code = sense_buffer[0] & 0xf; + + if (sense_class == 7) { + /* + * extended sense data. + */ + s = sense_buffer[7] + 8; + if (sb_len < s) { + log_debug("%s: sense buffer too small %d bytes, %d bytes too short", + dev_scsi->kernel, sb_len, s - sb_len); + return -1; + } + if ((code == 0x0) || (code == 0x1)) { + sense_key = sense_buffer[2] & 0xf; + if (s < 14) { + /* + * Possible? + */ + log_debug("%s: sense result too" " small %d bytes", + dev_scsi->kernel, s); + return -1; + } + asc = sense_buffer[12]; + ascq = sense_buffer[13]; + } else if ((code == 0x2) || (code == 0x3)) { + sense_key = sense_buffer[1] & 0xf; + asc = sense_buffer[2]; + ascq = sense_buffer[3]; + } else { + log_debug("%s: invalid sense code 0x%x", + dev_scsi->kernel, code); + return -1; + } + log_debug("%s: sense key 0x%x ASC 0x%x ASCQ 0x%x", + dev_scsi->kernel, sense_key, asc, ascq); + } else { + if (sb_len < 4) { + log_debug("%s: sense buffer too small %d bytes, %d bytes too short", + dev_scsi->kernel, sb_len, 4 - sb_len); + return -1; + } + + if (sense_buffer[0] < 15) + log_debug("%s: old sense key: 0x%x", dev_scsi->kernel, sense_buffer[0] & 0x0f); + else + log_debug("%s: sense = %2x %2x", + dev_scsi->kernel, sense_buffer[0], sense_buffer[2]); + log_debug("%s: non-extended sense class %d code 0x%0x", + dev_scsi->kernel, sense_class, code); + + } + +#ifdef DUMP_SENSE + for (i = 0, j = 0; (i < s) && (j < 254); i++) { + out_buffer[j++] = hex_str[(sense_buffer[i] & 0xf0) >> 4]; + out_buffer[j++] = hex_str[sense_buffer[i] & 0x0f]; + out_buffer[j++] = ' '; + } + out_buffer[j] = '\0'; + log_debug("%s: sense dump:", dev_scsi->kernel); + log_debug("%s: %s", dev_scsi->kernel, out_buffer); + +#endif + return -1; +} + +static int scsi_dump(struct udev *udev, + struct scsi_id_device *dev_scsi, struct sg_io_hdr *io) +{ + if (!io->status && !io->host_status && !io->msg_status && + !io->driver_status) { + /* + * Impossible, should not be called. + */ + log_debug("%s: called with no error", __FUNCTION__); + return -1; + } + + log_debug("%s: sg_io failed status 0x%x 0x%x 0x%x 0x%x", + dev_scsi->kernel, io->driver_status, io->host_status, io->msg_status, io->status); + if (io->status == SCSI_CHECK_CONDITION) + return scsi_dump_sense(udev, dev_scsi, io->sbp, io->sb_len_wr); + else + return -1; +} + +static int scsi_dump_v4(struct udev *udev, + struct scsi_id_device *dev_scsi, struct sg_io_v4 *io) +{ + if (!io->device_status && !io->transport_status && + !io->driver_status) { + /* + * Impossible, should not be called. + */ + log_debug("%s: called with no error", __FUNCTION__); + return -1; + } + + log_debug("%s: sg_io failed status 0x%x 0x%x 0x%x", + dev_scsi->kernel, io->driver_status, io->transport_status, io->device_status); + if (io->device_status == SCSI_CHECK_CONDITION) + return scsi_dump_sense(udev, dev_scsi, (unsigned char *)(uintptr_t)io->response, + io->response_len); + else + return -1; +} + +static int scsi_inquiry(struct udev *udev, + struct scsi_id_device *dev_scsi, int fd, + unsigned char evpd, unsigned char page, + unsigned char *buf, unsigned int buflen) +{ + unsigned char inq_cmd[INQUIRY_CMDLEN] = + { INQUIRY_CMD, evpd, page, 0, buflen, 0 }; + unsigned char sense[SENSE_BUFF_LEN]; + void *io_buf; + struct sg_io_v4 io_v4; + struct sg_io_hdr io_hdr; + int retry = 3; /* rather random */ + int retval; + + if (buflen > SCSI_INQ_BUFF_LEN) { + log_debug("buflen %d too long", buflen); + return -1; + } + +resend: + if (dev_scsi->use_sg == 4) { + memzero(&io_v4, sizeof(struct sg_io_v4)); + io_v4.guard = 'Q'; + io_v4.protocol = BSG_PROTOCOL_SCSI; + io_v4.subprotocol = BSG_SUB_PROTOCOL_SCSI_CMD; + io_v4.request_len = sizeof(inq_cmd); + io_v4.request = (uintptr_t)inq_cmd; + io_v4.max_response_len = sizeof(sense); + io_v4.response = (uintptr_t)sense; + io_v4.din_xfer_len = buflen; + io_v4.din_xferp = (uintptr_t)buf; + io_buf = (void *)&io_v4; + } else { + memzero(&io_hdr, sizeof(struct sg_io_hdr)); + io_hdr.interface_id = 'S'; + io_hdr.cmd_len = sizeof(inq_cmd); + io_hdr.mx_sb_len = sizeof(sense); + io_hdr.dxfer_direction = SG_DXFER_FROM_DEV; + io_hdr.dxfer_len = buflen; + io_hdr.dxferp = buf; + io_hdr.cmdp = inq_cmd; + io_hdr.sbp = sense; + io_hdr.timeout = DEF_TIMEOUT; + io_buf = (void *)&io_hdr; + } + + retval = ioctl(fd, SG_IO, io_buf); + if (retval < 0) { + if ((errno == EINVAL || errno == ENOSYS) && dev_scsi->use_sg == 4) { + dev_scsi->use_sg = 3; + goto resend; + } + log_debug_errno(errno, "%s: ioctl failed: %m", dev_scsi->kernel); + goto error; + } + + if (dev_scsi->use_sg == 4) + retval = sg_err_category4(udev, io_buf); + else + retval = sg_err_category3(udev, io_buf); + + switch (retval) { + case SG_ERR_CAT_NOTSUPPORTED: + buf[1] = 0; + /* Fallthrough */ + case SG_ERR_CAT_CLEAN: + case SG_ERR_CAT_RECOVERED: + retval = 0; + break; + + default: + if (dev_scsi->use_sg == 4) + retval = scsi_dump_v4(udev, dev_scsi, io_buf); + else + retval = scsi_dump(udev, dev_scsi, io_buf); + } + + if (!retval) { + retval = buflen; + } else if (retval > 0) { + if (--retry > 0) + goto resend; + retval = -1; + } + +error: + if (retval < 0) + log_debug("%s: Unable to get INQUIRY vpd %d page 0x%x.", + dev_scsi->kernel, evpd, page); + + return retval; +} + +/* Get list of supported EVPD pages */ +static int do_scsi_page0_inquiry(struct udev *udev, + struct scsi_id_device *dev_scsi, int fd, + unsigned char *buffer, unsigned int len) +{ + int retval; + + memzero(buffer, len); + retval = scsi_inquiry(udev, dev_scsi, fd, 1, 0x0, buffer, len); + if (retval < 0) + return 1; + + if (buffer[1] != 0) { + log_debug("%s: page 0 not available.", dev_scsi->kernel); + return 1; + } + if (buffer[3] > len) { + log_debug("%s: page 0 buffer too long %d", dev_scsi->kernel, buffer[3]); + return 1; + } + + /* + * Following check is based on code once included in the 2.5.x + * kernel. + * + * Some ill behaved devices return the standard inquiry here + * rather than the evpd data, snoop the data to verify. + */ + if (buffer[3] > MODEL_LENGTH) { + /* + * If the vendor id appears in the page assume the page is + * invalid. + */ + if (strneq((char *)&buffer[VENDOR_LENGTH], dev_scsi->vendor, VENDOR_LENGTH)) { + log_debug("%s: invalid page0 data", dev_scsi->kernel); + return 1; + } + } + return 0; +} + +/* + * The caller checks that serial is long enough to include the vendor + + * model. + */ +static int prepend_vendor_model(struct udev *udev, + struct scsi_id_device *dev_scsi, char *serial) +{ + int ind; + + strncpy(serial, dev_scsi->vendor, VENDOR_LENGTH); + strncat(serial, dev_scsi->model, MODEL_LENGTH); + ind = strlen(serial); + + /* + * This is not a complete check, since we are using strncat/cpy + * above, ind will never be too large. + */ + if (ind != (VENDOR_LENGTH + MODEL_LENGTH)) { + log_debug("%s: expected length %d, got length %d", + dev_scsi->kernel, (VENDOR_LENGTH + MODEL_LENGTH), ind); + return -1; + } + return ind; +} + +/* + * check_fill_0x83_id - check the page 0x83 id, if OK allocate and fill + * serial number. + */ +static int check_fill_0x83_id(struct udev *udev, + struct scsi_id_device *dev_scsi, + unsigned char *page_83, + const struct scsi_id_search_values + *id_search, char *serial, char *serial_short, + int max_len, char *wwn, + char *wwn_vendor_extension, char *tgpt_group) +{ + int i, j, s, len; + + /* + * ASSOCIATION must be with the device (value 0) + * or with the target port for SCSI_ID_TGTPORT + */ + if ((page_83[1] & 0x30) == 0x10) { + if (id_search->id_type != SCSI_ID_TGTGROUP) + return 1; + } else if ((page_83[1] & 0x30) != 0) + return 1; + + if ((page_83[1] & 0x0f) != id_search->id_type) + return 1; + + /* + * Possibly check NAA sub-type. + */ + if ((id_search->naa_type != SCSI_ID_NAA_DONT_CARE) && + (id_search->naa_type != (page_83[4] & 0xf0) >> 4)) + return 1; + + /* + * Check for matching code set - ASCII or BINARY. + */ + if ((page_83[0] & 0x0f) != id_search->code_set) + return 1; + + /* + * page_83[3]: identifier length + */ + len = page_83[3]; + if ((page_83[0] & 0x0f) != SCSI_ID_ASCII) + /* + * If not ASCII, use two bytes for each binary value. + */ + len *= 2; + + /* + * Add one byte for the NUL termination, and one for the id_type. + */ + len += 2; + if (id_search->id_type == SCSI_ID_VENDOR_SPECIFIC) + len += VENDOR_LENGTH + MODEL_LENGTH; + + if (max_len < len) { + log_debug("%s: length %d too short - need %d", + dev_scsi->kernel, max_len, len); + return 1; + } + + if (id_search->id_type == SCSI_ID_TGTGROUP && tgpt_group != NULL) { + unsigned int group; + + group = ((unsigned int)page_83[6] << 8) | page_83[7]; + sprintf(tgpt_group,"%x", group); + return 1; + } + + serial[0] = hex_str[id_search->id_type]; + + /* + * For SCSI_ID_VENDOR_SPECIFIC prepend the vendor and model before + * the id since it is not unique across all vendors and models, + * this differs from SCSI_ID_T10_VENDOR, where the vendor is + * included in the identifier. + */ + if (id_search->id_type == SCSI_ID_VENDOR_SPECIFIC) + if (prepend_vendor_model(udev, dev_scsi, &serial[1]) < 0) + return 1; + + i = 4; /* offset to the start of the identifier */ + s = j = strlen(serial); + if ((page_83[0] & 0x0f) == SCSI_ID_ASCII) { + /* + * ASCII descriptor. + */ + while (i < (4 + page_83[3])) + serial[j++] = page_83[i++]; + } else { + /* + * Binary descriptor, convert to ASCII, using two bytes of + * ASCII for each byte in the page_83. + */ + while (i < (4 + page_83[3])) { + serial[j++] = hex_str[(page_83[i] & 0xf0) >> 4]; + serial[j++] = hex_str[page_83[i] & 0x0f]; + i++; + } + } + + strcpy(serial_short, &serial[s]); + + if (id_search->id_type == SCSI_ID_NAA && wwn != NULL) { + strncpy(wwn, &serial[s], 16); + if (wwn_vendor_extension != NULL) + strncpy(wwn_vendor_extension, &serial[s + 16], 16); + } + + return 0; +} + +/* Extract the raw binary from VPD 0x83 pre-SPC devices */ +static int check_fill_0x83_prespc3(struct udev *udev, + struct scsi_id_device *dev_scsi, + unsigned char *page_83, + const struct scsi_id_search_values + *id_search, char *serial, char *serial_short, int max_len) +{ + int i, j; + + serial[0] = hex_str[id_search->id_type]; + /* serial has been memset to zero before */ + j = strlen(serial); /* j = 1; */ + + for (i = 0; (i < page_83[3]) && (j < max_len-3); ++i) { + serial[j++] = hex_str[(page_83[4+i] & 0xf0) >> 4]; + serial[j++] = hex_str[ page_83[4+i] & 0x0f]; + } + serial[max_len-1] = 0; + strncpy(serial_short, serial, max_len-1); + return 0; +} + + +/* Get device identification VPD page */ +static int do_scsi_page83_inquiry(struct udev *udev, + struct scsi_id_device *dev_scsi, int fd, + char *serial, char *serial_short, int len, + char *unit_serial_number, char *wwn, + char *wwn_vendor_extension, char *tgpt_group) +{ + int retval; + unsigned int id_ind, j; + unsigned char page_83[SCSI_INQ_BUFF_LEN]; + + /* also pick up the page 80 serial number */ + do_scsi_page80_inquiry(udev, dev_scsi, fd, NULL, unit_serial_number, MAX_SERIAL_LEN); + + memzero(page_83, SCSI_INQ_BUFF_LEN); + retval = scsi_inquiry(udev, dev_scsi, fd, 1, PAGE_83, page_83, + SCSI_INQ_BUFF_LEN); + if (retval < 0) + return 1; + + if (page_83[1] != PAGE_83) { + log_debug("%s: Invalid page 0x83", dev_scsi->kernel); + return 1; + } + + /* + * XXX Some devices (IBM 3542) return all spaces for an identifier if + * the LUN is not actually configured. This leads to identifiers of + * the form: "1 ". + */ + + /* + * Model 4, 5, and (some) model 6 EMC Symmetrix devices return + * a page 83 reply according to SCSI-2 format instead of SPC-2/3. + * + * The SCSI-2 page 83 format returns an IEEE WWN in binary + * encoded hexi-decimal in the 16 bytes following the initial + * 4-byte page 83 reply header. + * + * Both the SPC-2 and SPC-3 formats return an IEEE WWN as part + * of an Identification descriptor. The 3rd byte of the first + * Identification descriptor is a reserved (BSZ) byte field. + * + * Reference the 7th byte of the page 83 reply to determine + * whether the reply is compliant with SCSI-2 or SPC-2/3 + * specifications. A zero value in the 7th byte indicates + * an SPC-2/3 conformant reply, (i.e., the reserved field of the + * first Identification descriptor). This byte will be non-zero + * for a SCSI-2 conformant page 83 reply from these EMC + * Symmetrix models since the 7th byte of the reply corresponds + * to the 4th and 5th nibbles of the 6-byte OUI for EMC, that is, + * 0x006048. + */ + + if (page_83[6] != 0) + return check_fill_0x83_prespc3(udev, + dev_scsi, page_83, id_search_list, + serial, serial_short, len); + + /* + * Search for a match in the prioritized id_search_list - since WWN ids + * come first we can pick up the WWN in check_fill_0x83_id(). + */ + for (id_ind = 0; + id_ind < sizeof(id_search_list)/sizeof(id_search_list[0]); + id_ind++) { + /* + * Examine each descriptor returned. There is normally only + * one or a small number of descriptors. + */ + for (j = 4; j <= (unsigned int)page_83[3] + 3; j += page_83[j + 3] + 4) { + retval = check_fill_0x83_id(udev, + dev_scsi, &page_83[j], + &id_search_list[id_ind], + serial, serial_short, len, + wwn, wwn_vendor_extension, + tgpt_group); + if (!retval) + return retval; + else if (retval < 0) + return retval; + } + } + return 1; +} + +/* + * Get device identification VPD page for older SCSI-2 device which is not + * compliant with either SPC-2 or SPC-3 format. + * + * Return the hard coded error code value 2 if the page 83 reply is not + * conformant to the SCSI-2 format. + */ +static int do_scsi_page83_prespc3_inquiry(struct udev *udev, + struct scsi_id_device *dev_scsi, int fd, + char *serial, char *serial_short, int len) +{ + int retval; + int i, j; + unsigned char page_83[SCSI_INQ_BUFF_LEN]; + + memzero(page_83, SCSI_INQ_BUFF_LEN); + retval = scsi_inquiry(udev, dev_scsi, fd, 1, PAGE_83, page_83, SCSI_INQ_BUFF_LEN); + if (retval < 0) + return 1; + + if (page_83[1] != PAGE_83) { + log_debug("%s: Invalid page 0x83", dev_scsi->kernel); + return 1; + } + /* + * Model 4, 5, and (some) model 6 EMC Symmetrix devices return + * a page 83 reply according to SCSI-2 format instead of SPC-2/3. + * + * The SCSI-2 page 83 format returns an IEEE WWN in binary + * encoded hexi-decimal in the 16 bytes following the initial + * 4-byte page 83 reply header. + * + * Both the SPC-2 and SPC-3 formats return an IEEE WWN as part + * of an Identification descriptor. The 3rd byte of the first + * Identification descriptor is a reserved (BSZ) byte field. + * + * Reference the 7th byte of the page 83 reply to determine + * whether the reply is compliant with SCSI-2 or SPC-2/3 + * specifications. A zero value in the 7th byte indicates + * an SPC-2/3 conformant reply, (i.e., the reserved field of the + * first Identification descriptor). This byte will be non-zero + * for a SCSI-2 conformant page 83 reply from these EMC + * Symmetrix models since the 7th byte of the reply corresponds + * to the 4th and 5th nibbles of the 6-byte OUI for EMC, that is, + * 0x006048. + */ + if (page_83[6] == 0) + return 2; + + serial[0] = hex_str[id_search_list[0].id_type]; + /* + * The first four bytes contain data, not a descriptor. + */ + i = 4; + j = strlen(serial); + /* + * Binary descriptor, convert to ASCII, + * using two bytes of ASCII for each byte + * in the page_83. + */ + while (i < (page_83[3]+4)) { + serial[j++] = hex_str[(page_83[i] & 0xf0) >> 4]; + serial[j++] = hex_str[page_83[i] & 0x0f]; + i++; + } + return 0; +} + +/* Get unit serial number VPD page */ +static int do_scsi_page80_inquiry(struct udev *udev, + struct scsi_id_device *dev_scsi, int fd, + char *serial, char *serial_short, int max_len) +{ + int retval; + int ser_ind; + int i; + int len; + unsigned char buf[SCSI_INQ_BUFF_LEN]; + + memzero(buf, SCSI_INQ_BUFF_LEN); + retval = scsi_inquiry(udev, dev_scsi, fd, 1, PAGE_80, buf, SCSI_INQ_BUFF_LEN); + if (retval < 0) + return retval; + + if (buf[1] != PAGE_80) { + log_debug("%s: Invalid page 0x80", dev_scsi->kernel); + return 1; + } + + len = 1 + VENDOR_LENGTH + MODEL_LENGTH + buf[3]; + if (max_len < len) { + log_debug("%s: length %d too short - need %d", + dev_scsi->kernel, max_len, len); + return 1; + } + /* + * Prepend 'S' to avoid unlikely collision with page 0x83 vendor + * specific type where we prepend '0' + vendor + model. + */ + len = buf[3]; + if (serial != NULL) { + serial[0] = 'S'; + ser_ind = prepend_vendor_model(udev, dev_scsi, &serial[1]); + if (ser_ind < 0) + return 1; + ser_ind++; /* for the leading 'S' */ + for (i = 4; i < len + 4; i++, ser_ind++) + serial[ser_ind] = buf[i]; + } + if (serial_short != NULL) { + memcpy(serial_short, &buf[4], len); + serial_short[len] = '\0'; + } + return 0; +} + +int scsi_std_inquiry(struct udev *udev, + struct scsi_id_device *dev_scsi, const char *devname) +{ + int fd; + unsigned char buf[SCSI_INQ_BUFF_LEN]; + struct stat statbuf; + int err = 0; + + fd = open(devname, O_RDONLY | O_NONBLOCK | O_CLOEXEC); + if (fd < 0) { + log_debug_errno(errno, "scsi_id: cannot open %s: %m", devname); + return 1; + } + + if (fstat(fd, &statbuf) < 0) { + log_debug_errno(errno, "scsi_id: cannot stat %s: %m", devname); + err = 2; + goto out; + } + sprintf(dev_scsi->kernel,"%d:%d", major(statbuf.st_rdev), + minor(statbuf.st_rdev)); + + memzero(buf, SCSI_INQ_BUFF_LEN); + err = scsi_inquiry(udev, dev_scsi, fd, 0, 0, buf, SCSI_INQ_BUFF_LEN); + if (err < 0) + goto out; + + err = 0; + memcpy(dev_scsi->vendor, buf + 8, 8); + dev_scsi->vendor[8] = '\0'; + memcpy(dev_scsi->model, buf + 16, 16); + dev_scsi->model[16] = '\0'; + memcpy(dev_scsi->revision, buf + 32, 4); + dev_scsi->revision[4] = '\0'; + sprintf(dev_scsi->type,"%x", buf[0] & 0x1f); + +out: + close(fd); + return err; +} + +int scsi_get_serial(struct udev *udev, + struct scsi_id_device *dev_scsi, const char *devname, + int page_code, int len) +{ + unsigned char page0[SCSI_INQ_BUFF_LEN]; + int fd = -1; + int cnt; + int ind; + int retval; + + memzero(dev_scsi->serial, len); + initialize_srand(); + for (cnt = 20; cnt > 0; cnt--) { + struct timespec duration; + + fd = open(devname, O_RDONLY | O_NONBLOCK | O_CLOEXEC); + if (fd >= 0 || errno != EBUSY) + break; + duration.tv_sec = 0; + duration.tv_nsec = (200 * 1000 * 1000) + (rand() % 100 * 1000 * 1000); + nanosleep(&duration, NULL); + } + if (fd < 0) + return 1; + + if (page_code == PAGE_80) { + if (do_scsi_page80_inquiry(udev, dev_scsi, fd, dev_scsi->serial, dev_scsi->serial_short, len)) { + retval = 1; + goto completed; + } else { + retval = 0; + goto completed; + } + } else if (page_code == PAGE_83) { + if (do_scsi_page83_inquiry(udev, dev_scsi, fd, dev_scsi->serial, dev_scsi->serial_short, len, dev_scsi->unit_serial_number, dev_scsi->wwn, dev_scsi->wwn_vendor_extension, dev_scsi->tgpt_group)) { + retval = 1; + goto completed; + } else { + retval = 0; + goto completed; + } + } else if (page_code == PAGE_83_PRE_SPC3) { + retval = do_scsi_page83_prespc3_inquiry(udev, dev_scsi, fd, dev_scsi->serial, dev_scsi->serial_short, len); + if (retval) { + /* + * Fallback to servicing a SPC-2/3 compliant page 83 + * inquiry if the page 83 reply format does not + * conform to pre-SPC3 expectations. + */ + if (retval == 2) { + if (do_scsi_page83_inquiry(udev, dev_scsi, fd, dev_scsi->serial, dev_scsi->serial_short, len, dev_scsi->unit_serial_number, dev_scsi->wwn, dev_scsi->wwn_vendor_extension, dev_scsi->tgpt_group)) { + retval = 1; + goto completed; + } else { + retval = 0; + goto completed; + } + } + else { + retval = 1; + goto completed; + } + } else { + retval = 0; + goto completed; + } + } else if (page_code != 0x00) { + log_debug("%s: unsupported page code 0x%d", dev_scsi->kernel, page_code); + retval = 1; + goto completed; + } + + /* + * Get page 0, the page of the pages. By default, try from best to + * worst of supported pages: 0x83 then 0x80. + */ + if (do_scsi_page0_inquiry(udev, dev_scsi, fd, page0, SCSI_INQ_BUFF_LEN)) { + /* + * Don't try anything else. Black list if a specific page + * should be used for this vendor+model, or maybe have an + * optional fall-back to page 0x80 or page 0x83. + */ + retval = 1; + goto completed; + } + + for (ind = 4; ind <= page0[3] + 3; ind++) + if (page0[ind] == PAGE_83) + if (!do_scsi_page83_inquiry(udev, dev_scsi, fd, + dev_scsi->serial, dev_scsi->serial_short, len, dev_scsi->unit_serial_number, dev_scsi->wwn, dev_scsi->wwn_vendor_extension, dev_scsi->tgpt_group)) { + /* + * Success + */ + retval = 0; + goto completed; + } + + for (ind = 4; ind <= page0[3] + 3; ind++) + if (page0[ind] == PAGE_80) + if (!do_scsi_page80_inquiry(udev, dev_scsi, fd, + dev_scsi->serial, dev_scsi->serial_short, len)) { + /* + * Success + */ + retval = 0; + goto completed; + } + retval = 1; + +completed: + close(fd); + return retval; +} |