test: split of cryptsetup into its own test

1 files changed, 264 insertions, 0 deletions

diff --git a/test/TEST-02-CRYPTSETUP/test.sh b/test/TEST-02-CRYPTSETUP/test.sh
new file mode 100755
index 0000000000..790dc3074c
--- /dev/null
+++ b/test/TEST-02-CRYPTSETUP/test.sh
@@ -0,0 +1,264 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+TEST_DESCRIPTION="cryptsetup systemd setup"
+
+KVERSION=${KVERSION-$(uname -r)}
+KERNEL_VER=$(uname -r)
+
+# Uncomment this to debug failures
+#DEBUGFAIL="systemd.unit=multi-user.target"
+DEBUGTOOLS="df free ls stty cat ps ln ip route dmesg dhclient mkdir cp ping dhclient strace less grep id tty touch du sort"
+
+run_qemu() {
+    # TODO: qemu wrapper script: http://www.spinics.net/lists/kvm/msg72389.html
+    qemu-kvm \
+        -hda $TESTDIR/rootdisk.img \
+        -m 512M -nographic \
+        -net none -kernel /boot/vmlinuz-$KERNEL_VER \
+        -append "root=/dev/sda1 systemd.log_level=debug raid=noautodetect loglevel=2 init=/usr/lib/systemd/systemd ro console=ttyS0,115200n81 selinux=0 $DEBUGFAIL" || return 1
+
+    ret=1
+    mkdir -p $TESTDIR/root
+    mount ${LOOPDEV}p1 $TESTDIR/root
+    [[ -e $TESTDIR/root/testok ]] && ret=0
+    cp -a $TESTDIR/root/failed $TESTDIR
+    cryptsetup luksOpen ${LOOPDEV}p2 varcrypt <$TESTDIR/keyfile
+    mount /dev/mapper/varcrypt $TESTDIR/root/var
+    cp -a $TESTDIR/root/var/log/journal $TESTDIR
+    umount $TESTDIR/root/var
+    umount $TESTDIR/root
+    cryptsetup luksClose /dev/mapper/varcrypt
+    cat $TESTDIR/failed
+    ls -l $TESTDIR/journal/*/*.journal
+    test -s $TESTDIR/failed && ret=$(($ret+1))
+    return $ret
+}
+
+
+test_run() {
+    if check_qemu ; then
+        run_qemu || return 1
+    else
+        dwarn "can't run qemu-kvm, skipping"
+    fi
+    return 0
+}
+
+test_setup() {
+    rm -f $TESTDIR/rootdisk.img
+    # Create the blank file to use as a root filesystem
+    dd if=/dev/null of=$TESTDIR/rootdisk.img bs=1M seek=200
+    LOOPDEV=$(losetup --show -P -f $TESTDIR/rootdisk.img)
+    [ -b $LOOPDEV ] || return 1
+    echo "LOOPDEV=$LOOPDEV" >> $STATEFILE
+    sfdisk -C 6400 -H 2 -S 32 -L $LOOPDEV <<EOF
+,3200
+,
+EOF
+
+    mkfs.ext3 -L systemd ${LOOPDEV}p1
+    echo -n test >$TESTDIR/keyfile
+    cryptsetup -q luksFormat ${LOOPDEV}p2 $TESTDIR/keyfile
+    cryptsetup luksOpen ${LOOPDEV}p2 varcrypt <$TESTDIR/keyfile
+    mkfs.ext3 -L var /dev/mapper/varcrypt
+    mkdir -p $TESTDIR/root
+    mount ${LOOPDEV}p1 $TESTDIR/root
+    mkdir -p $TESTDIR/root/run
+    mkdir -p $TESTDIR/root/var
+    mount /dev/mapper/varcrypt $TESTDIR/root/var
+
+    # Create what will eventually be our root filesystem onto an overlay
+    (
+        LOG_LEVEL=5
+        initdir=$TESTDIR/root
+
+        # create the basic filesystem layout
+        setup_basic_dirs
+
+        # install compiled files
+        (cd ../..; make DESTDIR=$initdir install)
+
+        # remove unneeded documentation
+        rm -fr $initdir/usr/share/{man,doc,gtk-doc}
+
+        # install possible missing libraries
+        for i in $initdir/{sbin,bin}/* $initdir/lib/systemd/*; do
+            inst_libs $i
+        done
+
+        # make a journal directory
+        mkdir -p $initdir/var/log/journal
+
+        # install some basic config files
+        inst /etc/sysconfig/init
+        inst /etc/passwd
+        inst /etc/shadow
+        inst /etc/group
+        inst /etc/shells
+        inst /etc/nsswitch.conf
+        inst /etc/pam.conf
+        inst /etc/securetty
+        inst /etc/os-release
+        inst /etc/localtime
+        # we want an empty environment
+        > $initdir/etc/environment
+        > $initdir/etc/machine-id
+
+        # set the hostname
+        echo  systemd-testsuite > $initdir/etc/hostname
+
+        eval $(udevadm info --export --query=env --name=/dev/mapper/varcrypt)
+        eval $(udevadm info --export --query=env --name=${LOOPDEV}p2)
+
+        cat >$initdir/etc/crypttab <<EOF
+$DM_NAME UUID=$ID_FS_UUID /etc/varkey
+EOF
+        echo -n test > $initdir/etc/varkey
+        cat $initdir/etc/crypttab | ddebug
+
+        cat >$initdir/etc/fstab <<EOF
+LABEL=systemd           /       ext3    rw 0 1
+/dev/mapper/varcrypt    /var    ext3    defaults 0 1
+EOF
+
+        # setup the testsuite target
+        cat >$initdir/etc/systemd/system/testsuite.target <<EOF
+[Unit]
+Description=Testsuite target
+Requires=multi-user.target
+After=multi-user.target
+Conflicts=rescue.target
+AllowIsolate=yes
+EOF
+
+        # setup the testsuite service
+        cat >$initdir/etc/systemd/system/testsuite.service <<EOF
+[Unit]
+Description=Testsuite service
+After=multi-user.target
+
+[Service]
+ExecStart=/bin/bash -c 'set -x; systemctl --failed --no-legend --no-pager > /failed ; echo OK > /testok; while : ;do systemd-cat echo "testsuite service waiting for /var/log/journal" ; echo "testsuite service waiting for journal to move to /var/log/journal" > /dev/console ; for i in /var/log/journal/*;do [ -d "\$i" ] && echo "\$i" && break 2; done; sleep 1; done; sleep 1; exit 0;'
+ExecStopPost=/usr/bin/systemctl poweroff
+Type=oneshot
+EOF
+        mkdir -p $initdir/etc/systemd/system/testsuite.target.wants
+        ln -fs ../testsuite.service $initdir/etc/systemd/system/testsuite.target.wants/testsuite.service
+
+        # make the testsuite the default target
+        ln -fs testsuite.target $initdir/etc/systemd/system/default.target
+        mkdir -p $initdir/etc/rc.d
+        cat >$initdir/etc/rc.d/rc.local <<EOF
+#!/bin/bash
+exit 0
+EOF
+        chmod 0755 $initdir/etc/rc.d/rc.local
+        # install basic tools needed
+        dracut_install sh bash setsid loadkeys setfont \
+            login sushell sulogin gzip sleep echo mount umount cryptsetup
+        dracut_install dmsetup modprobe
+
+        instmods dm_crypt =crypto
+
+        type -P dmeventd >/dev/null && dracut_install dmeventd
+
+        inst_libdir_file "libdevmapper-event.so*"
+
+        inst_rules 10-dm.rules 13-dm-disk.rules 95-dm-notify.rules
+
+        # install libnss_files for login
+        inst_libdir_file "libnss_files*"
+
+        # install dbus and pam
+        find \
+            /etc/dbus-1 \
+            /etc/pam.d \
+            /etc/security \
+            /lib64/security \
+            /lib/security -xtype f \
+            | while read file; do
+            inst $file
+        done
+
+        # install dbus socket and service file
+        inst /usr/lib/systemd/system/dbus.socket
+        inst /usr/lib/systemd/system/dbus.service
+
+        # install basic keyboard maps and fonts
+        for i in \
+            /usr/lib/kbd/consolefonts/latarcyrheb-sun16* \
+            /usr/lib/kbd/keymaps/include/* \
+            /usr/lib/kbd/keymaps/i386/include/* \
+            /usr/lib/kbd/keymaps/i386/qwerty/us.*; do
+                [[ -f $i ]] || continue
+                inst $i
+        done
+
+        # some basic terminfo files
+        for _terminfodir in /lib/terminfo /etc/terminfo /usr/share/terminfo; do
+            [ -f ${_terminfodir}/l/linux ] && break
+        done
+        dracut_install -o ${_terminfodir}/l/linux
+
+        # softlink mtab
+        ln -fs /proc/self/mounts $initdir/etc/mtab
+
+        # install any Exec's from the service files
+        egrep -ho '^Exec[^ ]*=[^ ]+' $initdir/lib/systemd/system/*.service \
+            | while read i; do
+            i=${i##Exec*=}; i=${i##-}
+            inst $i
+        done
+
+        # install plymouth, if found... else remove plymouth service files
+        # if [ -x /usr/libexec/plymouth/plymouth-populate-initrd ]; then
+        #     PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$TEST_BASE_DIR/test-functions" \
+        #         /usr/libexec/plymouth/plymouth-populate-initrd -t $initdir
+        #         dracut_install plymouth plymouthd
+        # else
+        rm -f $initdir/{usr/lib,etc}/systemd/system/plymouth* $initdir/{usr/lib,etc}/systemd/system/*/plymouth*
+        # fi
+
+        # some helper tools for debugging
+        [[ $DEBUGTOOLS ]] && dracut_install $DEBUGTOOLS
+
+        # install ld.so.conf* and run ldconfig
+        cp -a /etc/ld.so.conf* $initdir/etc
+        ldconfig -r "$initdir"
+        ddebug "Strip binaeries"
+        find "$initdir" -perm +111 -type f | xargs strip --strip-unneeded | ddebug
+
+        # copy depmod files
+        inst /lib/modules/$KERNEL_VER/modules.order
+        inst /lib/modules/$KERNEL_VER/modules.builtin
+        # generate module dependencies
+        if [[ -d $initdir/lib/modules/$KERNEL_VER ]] && \
+            ! depmod -a -b "$initdir" $KERNEL_VER; then
+                dfatal "\"depmod -a $KERNEL_VER\" failed."
+                exit 1
+        fi
+    )
+    rm -fr $TESTDIR/nspawn-root
+    ddebug "cp -ar $TESTDIR/root $TESTDIR/nspawn-root"
+    cp -ar $TESTDIR/root $TESTDIR/nspawn-root
+    # we don't mount in the nspawn root
+    rm -fr $TESTDIR/nspawn-root/etc/fstab
+
+    ddebug "umount $TESTDIR/root/var"
+    umount $TESTDIR/root/var
+    cryptsetup luksClose /dev/mapper/varcrypt
+    ddebug "umount $TESTDIR/root"
+    umount $TESTDIR/root
+}
+
+test_cleanup() {
+    umount $TESTDIR/root/var 2>/dev/null
+    [[ -b /dev/mapper/varcrypt ]] && cryptsetup luksClose /dev/mapper/varcrypt
+    umount $TESTDIR/root 2>/dev/null
+    [[ $LOOPDEV ]] && losetup -d $LOOPDEV
+    return 0
+}
+
+. $TEST_BASE_DIR/test-functions
+do_test "$@"