summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Makefile.am1
-rw-r--r--src/libsystemd-terminal/term-internal.h358
-rw-r--r--src/libsystemd-terminal/term-screen.c3882
3 files changed, 4110 insertions, 131 deletions
diff --git a/Makefile.am b/Makefile.am
index 73f1252d30..0de60148d8 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -2842,6 +2842,7 @@ libsystemd_terminal_la_SOURCES = \
src/libsystemd-terminal/term-charset.c \
src/libsystemd-terminal/term-page.c \
src/libsystemd-terminal/term-parser.c \
+ src/libsystemd-terminal/term-screen.c \
src/libsystemd-terminal/term-wcwidth.c
libsystemd_terminal_la_LIBADD = \
diff --git a/src/libsystemd-terminal/term-internal.h b/src/libsystemd-terminal/term-internal.h
index a3d1f5458b..345996b943 100644
--- a/src/libsystemd-terminal/term-internal.h
+++ b/src/libsystemd-terminal/term-internal.h
@@ -42,6 +42,8 @@ typedef struct term_seq term_seq;
typedef struct term_parser term_parser;
typedef uint32_t term_charset[96];
+typedef struct term_screen term_screen;
+
/*
* Miscellaneous
* Sundry things and external helpers.
@@ -433,8 +435,8 @@ enum {
TERM_CMD_DA1, /* primary-device-attributes */
TERM_CMD_DA2, /* secondary-device-attributes */
TERM_CMD_DA3, /* tertiary-device-attributes */
- TERM_CMD_DC1, /* device-control-1 */
- TERM_CMD_DC3, /* device-control-3 */
+ TERM_CMD_DC1, /* device-control-1 or XON */
+ TERM_CMD_DC3, /* device-control-3 or XOFF */
TERM_CMD_DCH, /* delete-character */
TERM_CMD_DECALN, /* screen-alignment-pattern */
TERM_CMD_DECANM, /* ansi-mode */
@@ -445,135 +447,135 @@ enum {
TERM_CMD_DECDHL_BH, /* double-width-double-height-line: bottom half */
TERM_CMD_DECDHL_TH, /* double-width-double-height-line: top half */
TERM_CMD_DECDWL, /* double-width-single-height-line */
- TERM_CMD_DECEFR,
- TERM_CMD_DECELF,
- TERM_CMD_DECELR,
- TERM_CMD_DECERA,
- TERM_CMD_DECFI,
- TERM_CMD_DECFRA,
- TERM_CMD_DECIC,
- TERM_CMD_DECID,
- TERM_CMD_DECINVM,
- TERM_CMD_DECKBD,
- TERM_CMD_DECKPAM,
- TERM_CMD_DECKPNM,
- TERM_CMD_DECLFKC,
- TERM_CMD_DECLL,
- TERM_CMD_DECLTOD,
- TERM_CMD_DECPCTERM,
- TERM_CMD_DECPKA,
- TERM_CMD_DECPKFMR,
- TERM_CMD_DECRARA,
- TERM_CMD_DECRC,
- TERM_CMD_DECREQTPARM,
- TERM_CMD_DECRPKT,
- TERM_CMD_DECRQCRA,
- TERM_CMD_DECRQDE,
- TERM_CMD_DECRQKT,
- TERM_CMD_DECRQLP,
- TERM_CMD_DECRQM_ANSI,
- TERM_CMD_DECRQM_DEC,
- TERM_CMD_DECRQPKFM,
- TERM_CMD_DECRQPSR,
- TERM_CMD_DECRQTSR,
- TERM_CMD_DECRQUPSS,
- TERM_CMD_DECSACE,
- TERM_CMD_DECSASD,
- TERM_CMD_DECSC,
- TERM_CMD_DECSCA,
- TERM_CMD_DECSCL,
- TERM_CMD_DECSCP,
- TERM_CMD_DECSCPP,
- TERM_CMD_DECSCS,
- TERM_CMD_DECSCUSR,
- TERM_CMD_DECSDDT,
- TERM_CMD_DECSDPT,
- TERM_CMD_DECSED,
- TERM_CMD_DECSEL,
- TERM_CMD_DECSERA,
- TERM_CMD_DECSFC,
- TERM_CMD_DECSKCV,
- TERM_CMD_DECSLCK,
- TERM_CMD_DECSLE,
- TERM_CMD_DECSLPP,
- TERM_CMD_DECSLRM_OR_SC,
- TERM_CMD_DECSMBV,
- TERM_CMD_DECSMKR,
- TERM_CMD_DECSNLS,
- TERM_CMD_DECSPP,
- TERM_CMD_DECSPPCS,
- TERM_CMD_DECSPRTT,
- TERM_CMD_DECSR,
- TERM_CMD_DECSRFR,
- TERM_CMD_DECSSCLS,
- TERM_CMD_DECSSDT,
- TERM_CMD_DECSSL,
- TERM_CMD_DECST8C,
- TERM_CMD_DECSTBM,
- TERM_CMD_DECSTR,
- TERM_CMD_DECSTRL,
- TERM_CMD_DECSWBV,
- TERM_CMD_DECSWL,
- TERM_CMD_DECTID,
- TERM_CMD_DECTME,
- TERM_CMD_DECTST,
- TERM_CMD_DL,
- TERM_CMD_DSR_ANSI,
- TERM_CMD_DSR_DEC,
- TERM_CMD_ECH,
- TERM_CMD_ED,
- TERM_CMD_EL,
- TERM_CMD_ENQ,
- TERM_CMD_EPA,
- TERM_CMD_FF,
- TERM_CMD_HPA,
- TERM_CMD_HPR,
- TERM_CMD_HT,
- TERM_CMD_HTS,
- TERM_CMD_HVP,
- TERM_CMD_ICH,
- TERM_CMD_IL,
- TERM_CMD_IND,
- TERM_CMD_LF,
- TERM_CMD_LS1R,
- TERM_CMD_LS2,
- TERM_CMD_LS2R,
- TERM_CMD_LS3,
- TERM_CMD_LS3R,
- TERM_CMD_MC_ANSI,
- TERM_CMD_MC_DEC,
- TERM_CMD_NEL,
- TERM_CMD_NP,
- TERM_CMD_NULL,
- TERM_CMD_PP,
- TERM_CMD_PPA,
- TERM_CMD_PPB,
- TERM_CMD_PPR,
- TERM_CMD_RC,
- TERM_CMD_REP,
- TERM_CMD_RI,
- TERM_CMD_RIS,
- TERM_CMD_RM_ANSI,
- TERM_CMD_RM_DEC,
- TERM_CMD_S7C1T,
- TERM_CMD_S8C1T,
- TERM_CMD_SCS,
- TERM_CMD_SD,
- TERM_CMD_SGR,
- TERM_CMD_SI,
- TERM_CMD_SM_ANSI,
- TERM_CMD_SM_DEC,
- TERM_CMD_SO,
- TERM_CMD_SPA,
- TERM_CMD_SS2,
- TERM_CMD_SS3,
- TERM_CMD_ST,
- TERM_CMD_SU,
- TERM_CMD_SUB,
- TERM_CMD_TBC,
- TERM_CMD_VPA,
- TERM_CMD_VPR,
- TERM_CMD_VT,
+ TERM_CMD_DECEFR, /* enable-filter-rectangle */
+ TERM_CMD_DECELF, /* enable-local-functions */
+ TERM_CMD_DECELR, /* enable-locator-reporting */
+ TERM_CMD_DECERA, /* erase-rectangular-area */
+ TERM_CMD_DECFI, /* forward-index */
+ TERM_CMD_DECFRA, /* fill-rectangular-area */
+ TERM_CMD_DECIC, /* insert-column */
+ TERM_CMD_DECID, /* return-terminal-id */
+ TERM_CMD_DECINVM, /* invoke-macro */
+ TERM_CMD_DECKBD, /* keyboard-language-selection */
+ TERM_CMD_DECKPAM, /* keypad-application-mode */
+ TERM_CMD_DECKPNM, /* keypad-numeric-mode */
+ TERM_CMD_DECLFKC, /* local-function-key-control */
+ TERM_CMD_DECLL, /* load-leds */
+ TERM_CMD_DECLTOD, /* load-time-of-day */
+ TERM_CMD_DECPCTERM, /* pcterm-mode */
+ TERM_CMD_DECPKA, /* program-key-action */
+ TERM_CMD_DECPKFMR, /* program-key-free-memory-report */
+ TERM_CMD_DECRARA, /* reverse-attributes-in-rectangular-area */
+ TERM_CMD_DECRC, /* restore-cursor */
+ TERM_CMD_DECREQTPARM, /* request-terminal-parameters */
+ TERM_CMD_DECRPKT, /* report-key-type */
+ TERM_CMD_DECRQCRA, /* request-checksum-of-rectangular-area */
+ TERM_CMD_DECRQDE, /* request-display-extent */
+ TERM_CMD_DECRQKT, /* request-key-type */
+ TERM_CMD_DECRQLP, /* request-locator-position */
+ TERM_CMD_DECRQM_ANSI, /* request-mode-ansi */
+ TERM_CMD_DECRQM_DEC, /* request-mode-dec */
+ TERM_CMD_DECRQPKFM, /* request-program-key-free-memory */
+ TERM_CMD_DECRQPSR, /* request-presentation-state-report */
+ TERM_CMD_DECRQTSR, /* request-terminal-state-report */
+ TERM_CMD_DECRQUPSS, /* request-user-preferred-supplemental-set */
+ TERM_CMD_DECSACE, /* select-attribute-change-extent */
+ TERM_CMD_DECSASD, /* select-active-status-display */
+ TERM_CMD_DECSC, /* save-cursor */
+ TERM_CMD_DECSCA, /* select-character-protection-attribute */
+ TERM_CMD_DECSCL, /* select-conformance-level */
+ TERM_CMD_DECSCP, /* select-communication-port */
+ TERM_CMD_DECSCPP, /* select-columns-per-page */
+ TERM_CMD_DECSCS, /* select-communication-speed */
+ TERM_CMD_DECSCUSR, /* set-cursor-style */
+ TERM_CMD_DECSDDT, /* select-disconnect-delay-time */
+ TERM_CMD_DECSDPT, /* select-digital-printed-data-type */
+ TERM_CMD_DECSED, /* selective-erase-in-display */
+ TERM_CMD_DECSEL, /* selective-erase-in-line */
+ TERM_CMD_DECSERA, /* selective-erase-rectangular-area */
+ TERM_CMD_DECSFC, /* select-flow-control */
+ TERM_CMD_DECSKCV, /* set-key-click-volume */
+ TERM_CMD_DECSLCK, /* set-lock-key-style */
+ TERM_CMD_DECSLE, /* select-locator-events */
+ TERM_CMD_DECSLPP, /* set-lines-per-page */
+ TERM_CMD_DECSLRM_OR_SC, /* set-left-and-right-margins or save-cursor */
+ TERM_CMD_DECSMBV, /* set-margin-bell-volume */
+ TERM_CMD_DECSMKR, /* select-modifier-key-reporting */
+ TERM_CMD_DECSNLS, /* set-lines-per-screen */
+ TERM_CMD_DECSPP, /* set-port-parameter */
+ TERM_CMD_DECSPPCS, /* select-pro-printer-character-set */
+ TERM_CMD_DECSPRTT, /* select-printer-type */
+ TERM_CMD_DECSR, /* secure-reset */
+ TERM_CMD_DECSRFR, /* select-refresh-rate */
+ TERM_CMD_DECSSCLS, /* set-scroll-speed */
+ TERM_CMD_DECSSDT, /* select-status-display-line-type */
+ TERM_CMD_DECSSL, /* select-setup-language */
+ TERM_CMD_DECST8C, /* set-tab-at-every-8-columns */
+ TERM_CMD_DECSTBM, /* set-top-and-bottom-margins */
+ TERM_CMD_DECSTR, /* soft-terminal-reset */
+ TERM_CMD_DECSTRL, /* set-transmit-rate-limit */
+ TERM_CMD_DECSWBV, /* set-warning-bell-volume */
+ TERM_CMD_DECSWL, /* single-width-single-height-line */
+ TERM_CMD_DECTID, /* select-terminal-id */
+ TERM_CMD_DECTME, /* terminal-mode-emulation */
+ TERM_CMD_DECTST, /* invoke-confidence-test */
+ TERM_CMD_DL, /* delete-line */
+ TERM_CMD_DSR_ANSI, /* device-status-report-ansi */
+ TERM_CMD_DSR_DEC, /* device-status-report-dec */
+ TERM_CMD_ECH, /* erase-character */
+ TERM_CMD_ED, /* erase-in-display */
+ TERM_CMD_EL, /* erase-in-line */
+ TERM_CMD_ENQ, /* enquiry */
+ TERM_CMD_EPA, /* end-of-guarded-area */
+ TERM_CMD_FF, /* form-feed */
+ TERM_CMD_HPA, /* horizontal-position-absolute */
+ TERM_CMD_HPR, /* horizontal-position-relative */
+ TERM_CMD_HT, /* horizontal-tab */
+ TERM_CMD_HTS, /* horizontal-tab-set */
+ TERM_CMD_HVP, /* horizontal-and-vertical-position */
+ TERM_CMD_ICH, /* insert-character */
+ TERM_CMD_IL, /* insert-line */
+ TERM_CMD_IND, /* index */
+ TERM_CMD_LF, /* line-feed */
+ TERM_CMD_LS1R, /* locking-shift-1-right */
+ TERM_CMD_LS2, /* locking-shift-2 */
+ TERM_CMD_LS2R, /* locking-shift-2-right */
+ TERM_CMD_LS3, /* locking-shift-3 */
+ TERM_CMD_LS3R, /* locking-shift-3-right */
+ TERM_CMD_MC_ANSI, /* media-copy-ansi */
+ TERM_CMD_MC_DEC, /* media-copy-dec */
+ TERM_CMD_NEL, /* next-line */
+ TERM_CMD_NP, /* next-page */
+ TERM_CMD_NULL, /* null */
+ TERM_CMD_PP, /* preceding-page */
+ TERM_CMD_PPA, /* page-position-absolute */
+ TERM_CMD_PPB, /* page-position-backward */
+ TERM_CMD_PPR, /* page-position-relative */
+ TERM_CMD_RC, /* restore-cursor */
+ TERM_CMD_REP, /* repeat */
+ TERM_CMD_RI, /* reverse-index */
+ TERM_CMD_RIS, /* reset-to-initial-state */
+ TERM_CMD_RM_ANSI, /* reset-mode-ansi */
+ TERM_CMD_RM_DEC, /* reset-mode-dec */
+ TERM_CMD_S7C1T, /* set-7bit-c1-terminal */
+ TERM_CMD_S8C1T, /* set-8bit-c1-terminal */
+ TERM_CMD_SCS, /* select-character-set */
+ TERM_CMD_SD, /* scroll-down */
+ TERM_CMD_SGR, /* select-graphics-rendition */
+ TERM_CMD_SI, /* shift-in */
+ TERM_CMD_SM_ANSI, /* set-mode-ansi */
+ TERM_CMD_SM_DEC, /* set-mode-dec */
+ TERM_CMD_SO, /* shift-out */
+ TERM_CMD_SPA, /* start-of-protected-area */
+ TERM_CMD_SS2, /* single-shift-2 */
+ TERM_CMD_SS3, /* single-shift-3 */
+ TERM_CMD_ST, /* string-terminator */
+ TERM_CMD_SU, /* scroll-up */
+ TERM_CMD_SUB, /* substitute */
+ TERM_CMD_TBC, /* tab-clear */
+ TERM_CMD_VPA, /* vertical-line-position-absolute */
+ TERM_CMD_VPR, /* vertical-line-position-relative */
+ TERM_CMD_VT, /* vertical-tab */
TERM_CMD_XTERM_CLLHP, /* xterm-cursor-lower-left-hp-bugfix */
TERM_CMD_XTERM_IHMT, /* xterm-initiate-highlight-mouse-tracking*/
TERM_CMD_XTERM_MLHP, /* xterm-memory-lock-hp-bugfix */
@@ -684,3 +686,97 @@ int term_parser_feed(term_parser *parser, const term_seq **seq_out, uint32_t raw
#define _term_parser_free_ _cleanup_(term_parser_freep)
DEFINE_TRIVIAL_CLEANUP_FUNC(term_parser*, term_parser_free);
+
+/*
+ * Screens
+ * A term_screen object represents the terminal-side of the communication. It
+ * connects the term-parser and term-pages and handles all required commands.
+ * All state is managed by it.
+ */
+
+enum {
+ TERM_FLAG_7BIT_MODE = (1U << 0), /* 7bit mode (default: off) */
+ TERM_FLAG_HIDE_CURSOR = (1U << 1), /* hide cursor caret (default: off) */
+ TERM_FLAG_INHIBIT_TPARM = (1U << 2), /* do not send TPARM unrequested (default: off) */
+ TERM_FLAG_NEWLINE_MODE = (1U << 3), /* perform carriage-return on line-feeds (default: off) */
+ TERM_FLAG_ORIGIN_MODE = (1U << 4), /* in origin mode, the cursor is bound by the margins (default: off) */
+ TERM_FLAG_PENDING_WRAP = (1U << 5), /* wrap-around is pending */
+ TERM_FLAG_AUTO_WRAP = (1U << 6), /* auto-wrap mode causes line-wraps at line-ends (default: off) */
+ TERM_FLAG_KEYPAD_MODE = (1U << 7), /* application-keypad mode (default: off) */
+ TERM_FLAG_CURSOR_KEYS = (1U << 8), /* enable application cursor-keys (default: off) */
+};
+
+enum {
+ TERM_CONFORMANCE_LEVEL_VT52,
+ TERM_CONFORMANCE_LEVEL_VT100,
+ TERM_CONFORMANCE_LEVEL_VT400,
+ TERM_CONFORMANCE_LEVEL_CNT,
+};
+
+typedef int (*term_screen_write_fn) (term_screen *screen, void *userdata, const void *buf, size_t size);
+typedef int (*term_screen_cmd_fn) (term_screen *screen, void *userdata, unsigned int cmd, const term_seq *seq);
+
+struct term_screen {
+ unsigned long ref;
+ term_age_t age;
+
+ term_page *page;
+ term_page *page_main;
+ term_page *page_alt;
+ term_history *history;
+ term_history *history_main;
+
+ unsigned int n_tabs;
+ uint8_t *tabs;
+
+ term_utf8 utf8;
+ term_parser *parser;
+
+ term_screen_write_fn write_fn;
+ void *write_fn_data;
+ term_screen_cmd_fn cmd_fn;
+ void *cmd_fn_data;
+
+ unsigned int flags;
+ unsigned int conformance_level;
+ unsigned int cursor_x;
+ unsigned int cursor_y;
+ term_attr attr;
+ term_attr default_attr;
+
+ term_charset **gl;
+ term_charset **gr;
+ term_charset **glt;
+ term_charset **grt;
+ term_charset *g0;
+ term_charset *g1;
+ term_charset *g2;
+ term_charset *g3;
+
+ char *answerback;
+
+ struct {
+ unsigned int cursor_x;
+ unsigned int cursor_y;
+ term_attr attr;
+ term_charset **gl;
+ term_charset **gr;
+ term_charset **glt;
+ term_charset **grt;
+ unsigned int flags;
+ } saved;
+};
+
+int term_screen_new(term_screen **out, term_screen_write_fn write_fn, void *write_fn_data, term_screen_cmd_fn cmd_fn, void *cmd_fn_data);
+term_screen *term_screen_ref(term_screen *screen);
+term_screen *term_screen_unref(term_screen *screen);
+
+DEFINE_TRIVIAL_CLEANUP_FUNC(term_screen*, term_screen_unref);
+
+int term_screen_feed_text(term_screen *screen, const uint8_t *in, size_t size);
+int term_screen_feed_keyboard(term_screen *screen, uint32_t keysym, uint32_t ascii, uint32_t ucs4, unsigned int mods);
+int term_screen_resize(term_screen *screen, unsigned int width, unsigned int height);
+void term_screen_soft_reset(term_screen *screen);
+void term_screen_hard_reset(term_screen *screen);
+
+int term_screen_set_answerback(term_screen *screen, const char *answerback);
diff --git a/src/libsystemd-terminal/term-screen.c b/src/libsystemd-terminal/term-screen.c
new file mode 100644
index 0000000000..a19c684d2a
--- /dev/null
+++ b/src/libsystemd-terminal/term-screen.c
@@ -0,0 +1,3882 @@
+/*-*- Mode: C; c-basic-offset: 8; indent-tabs-mode: nil -*-*/
+
+/***
+ This file is part of systemd.
+
+ Copyright (C) 2014 David Herrmann <dh.herrmann@gmail.com>
+
+ systemd is free software; you can redistribute it and/or modify it
+ under the terms of the GNU Lesser General Public License as published by
+ the Free Software Foundation; either version 2.1 of the License, or
+ (at your option) any later version.
+
+ systemd is distributed in the hope that it will be useful, but
+ WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public License
+ along with systemd; If not, see <http://www.gnu.org/licenses/>.
+***/
+
+/*
+ * Terminal Screens
+ * The term_screen layer implements the terminal-side. It handles all commands
+ * returned by the seq-parser and applies them to its own pages.
+ *
+ * While there are a lot of legacy control-sequences, we only support a small
+ * subset. There is no reason to implement unused codes like horizontal
+ * scrolling.
+ * If you implement new commands, make sure to document them properly.
+ *
+ * Standards:
+ * ECMA-48
+ * ANSI X3.64
+ * ISO/IEC 6429
+ * References:
+ * http://www.vt100.net/emu/ctrlseq_dec.html
+ * http://www.vt100.net/docs/vt100-ug/chapter3.html
+ * http://www.vt100.net/docs/vt510-rm/chapter4
+ * http://www.vt100.net/docs/vt510-rm/contents
+ * http://invisible-island.net/xterm/ctlseqs/ctlseqs.html
+ * ASCII
+ * http://en.wikipedia.org/wiki/C0_and_C1_control_codes
+ * https://en.wikipedia.org/wiki/ANSI_color
+ */
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include "macro.h"
+#include "term-internal.h"
+#include "util.h"
+
+int term_screen_new(term_screen **out, term_screen_write_fn write_fn, void *write_fn_data, term_screen_cmd_fn cmd_fn, void *cmd_fn_data) {
+ _cleanup_(term_screen_unrefp) term_screen *screen = NULL;
+ int r;
+
+ assert_return(out, -EINVAL);
+
+ screen = new0(term_screen, 1);
+ if (!screen)
+ return -ENOMEM;
+
+ screen->ref = 1;
+ screen->age = 1;
+ screen->write_fn = write_fn;
+ screen->write_fn_data = write_fn_data;
+ screen->cmd_fn = cmd_fn;
+ screen->cmd_fn_data = cmd_fn_data;
+ screen->flags = TERM_FLAG_7BIT_MODE;
+ screen->conformance_level = TERM_CONFORMANCE_LEVEL_VT400;
+ screen->gl = &screen->g0;
+ screen->gr = &screen->g1;
+ screen->g0 = &term_unicode_lower;
+ screen->g1 = &term_unicode_upper;
+ screen->g2 = &term_unicode_lower;
+ screen->g3 = &term_unicode_upper;
+
+ screen->saved.cursor_x = 0;
+ screen->saved.cursor_y = 0;
+ screen->saved.attr = screen->attr;
+ screen->saved.gl = screen->gl;
+ screen->saved.gr = screen->gr;
+
+ r = term_page_new(&screen->page_main);
+ if (r < 0)
+ return r;
+
+ r = term_page_new(&screen->page_alt);
+ if (r < 0)
+ return r;
+
+ r = term_parser_new(&screen->parser, false);
+ if (r < 0)
+ return r;
+
+ r = term_history_new(&screen->history_main);
+ if (r < 0)
+ return r;
+
+ screen->page = screen->page_main;
+ screen->history = screen->history_main;
+
+ *out = screen;
+ screen = NULL;
+ return 0;
+}
+
+term_screen *term_screen_ref(term_screen *screen) {
+ if (!screen)
+ return NULL;
+
+ assert_return(screen->ref > 0, NULL);
+
+ ++screen->ref;
+ return screen;
+}
+
+term_screen *term_screen_unref(term_screen *screen) {
+ if (!screen)
+ return NULL;
+
+ assert_return(screen->ref > 0, NULL);
+
+ if (--screen->ref)
+ return NULL;
+
+ free(screen->answerback);
+ free(screen->tabs);
+ term_history_free(screen->history_main);
+ term_page_free(screen->page_alt);
+ term_page_free(screen->page_main);
+ term_parser_free(screen->parser);
+ free(screen);
+
+ return NULL;
+}
+
+/*
+ * Write-Helpers
+ * Unfortunately, 7bit/8bit compat mode requires us to send C1 controls encoded
+ * as 7bit if asked by the application. This is really used in the wild, so we
+ * cannot fall back to "always 7bit".
+ * screen_write() is the underlying backend which forwards any writes to the
+ * users's callback. It's the users responsibility to buffer these and write
+ * them out once their call to term_screen_feed_*() returns.
+ * The SEQ_WRITE() and SEQ_WRITE_KEY() macros allow constructing C0/C1 sequences
+ * directly in the code-base without requiring any intermediate buffer during
+ * runtime.
+ */
+
+#define C0_CSI "\e["
+#define C1_CSI "\x9b"
+
+#define SEQ(_screen, _prefix_esc, _c0, _c1, _seq) \
+ (((_screen)->flags & TERM_FLAG_7BIT_MODE) ? \
+ ((_prefix_esc) ? ("\e" _c0 _seq) : (_c0 _seq)) : \
+ ((_prefix_esc) ? ("\e" _c1 _seq) : (_c1 _seq)))
+
+#define SEQ_SIZE(_screen, _prefix_esc, _c0, _c1, _seq) \
+ (((_screen)->flags & TERM_FLAG_7BIT_MODE) ? \
+ ((_prefix_esc) ? sizeof("\e" _c0 _seq) : sizeof(_c0 _seq)) : \
+ ((_prefix_esc) ? sizeof("\e" _c1 _seq) : sizeof(_c1 _seq)))
+
+#define SEQ_WRITE_KEY(_screen, _prefix_esc, _c0, _c1, _seq) \
+ screen_write((_screen), \
+ SEQ((_screen), (_prefix_esc), \
+ _c0, _c1, _seq), \
+ SEQ_SIZE((_screen), (_prefix_esc), \
+ _c0, _c1, _seq) - 1)
+
+#define SEQ_WRITE(_screen, _c0, _c1, _seq) \
+ SEQ_WRITE_KEY((_screen), false, _c0, _c1, _seq)
+
+static int screen_write(term_screen *screen, const void *buf, size_t len) {
+ if (len < 1 || !screen->write_fn)
+ return 0;
+
+ return screen->write_fn(screen, screen->write_fn_data, buf, len);
+}
+
+/*
+ * Command Forwarding
+ * Some commands cannot be handled by the screen-layer directly. Those are
+ * forwarded to the command-handler of the caller. This is rarely used and can
+ * safely be set to NULL.
+ */
+
+static int screen_forward(term_screen *screen, unsigned int cmd, const term_seq *seq) {
+ if (!screen->cmd_fn)
+ return 0;
+
+ return screen->cmd_fn(screen, screen->cmd_fn_data, cmd, seq);
+}
+
+/*
+ * Screen Helpers
+ * These helpers implement common-operations like cursor-handler and more, which
+ * are used by several command dispatchers.
+ */
+
+static unsigned int screen_clamp_x(term_screen *screen, unsigned int x) {
+ if (x >= screen->page->width)
+ return (screen->page->width > 0) ? screen->page->width - 1 : 0;
+
+ return x;
+}
+
+static unsigned int screen_clamp_y(term_screen *screen, unsigned int y) {
+ if (y >= screen->page->height)
+ return (screen->page->height > 0) ? screen->page->height - 1 : 0;
+
+ return y;
+}
+
+static bool screen_tab_is_set(term_screen *screen, unsigned int pos) {
+ if (pos >= screen->page->width)
+ return false;
+
+ return screen->tabs[pos / 8] & (1 << (pos % 8));
+}
+
+static inline void screen_age_cursor(term_screen *screen) {
+ term_cell *cell;
+
+ cell = term_page_get_cell(screen->page, screen->cursor_x, screen->cursor_y);
+ if (cell)
+ cell->age = screen->age;
+}
+
+static void screen_cursor_clear_wrap(term_screen *screen) {
+ screen->flags &= ~TERM_FLAG_PENDING_WRAP;
+}
+
+static void screen_cursor_set(term_screen *screen, unsigned int x, unsigned int y) {
+ x = screen_clamp_x(screen, x);
+ y = screen_clamp_y(screen, y);
+
+ if (x == screen->cursor_x && y == screen->cursor_y)
+ return;
+
+ if (!(screen->flags & TERM_FLAG_HIDE_CURSOR))
+ screen_age_cursor(screen);
+
+ screen->cursor_x = x;
+ screen->cursor_y = y;
+
+ if (!(screen->flags & TERM_FLAG_HIDE_CURSOR))
+ screen_age_cursor(screen);
+}
+
+static void screen_cursor_set_rel(term_screen *screen, unsigned int x, unsigned int y) {
+ if (screen->flags & TERM_FLAG_ORIGIN_MODE) {
+ x = screen_clamp_x(screen, x);
+ y = screen_clamp_x(screen, y) + screen->page->scroll_idx;
+
+ if (y >= screen->page->scroll_idx + screen->page->scroll_num) {
+ y = screen->page->scroll_idx + screen->page->scroll_num;
+ if (screen->page->scroll_num > 0)
+ y -= 1;
+ }
+ }
+
+ screen_cursor_set(screen, x, y);
+}
+
+static void screen_cursor_left(term_screen *screen, unsigned int num) {
+ if (num > screen->cursor_x)
+ num = screen->cursor_x;
+
+ screen_cursor_set(screen, screen->cursor_x - num, screen->cursor_y);
+}
+
+static void screen_cursor_left_tab(term_screen *screen, unsigned int num) {
+ unsigned int i;
+
+ i = screen->cursor_x;
+ while (i > 0 && num > 0) {
+ if (screen_tab_is_set(screen, --i))
+ --num;
+ }
+
+ screen_cursor_set(screen, i, screen->cursor_y);
+}
+
+static void screen_cursor_right(term_screen *screen, unsigned int num) {
+ if (num > screen->page->width)
+ num = screen->page->width;
+
+ screen_cursor_set(screen, screen->cursor_x + num, screen->cursor_y);
+}
+
+static void screen_cursor_right_tab(term_screen *screen, unsigned int num) {
+ unsigned int i;
+
+ i = screen->cursor_x;
+ while (i + 1 < screen->page->width && num > 0) {
+ if (screen_tab_is_set(screen, ++i))
+ --num;
+ }
+
+ screen_cursor_set(screen, i, screen->cursor_y);
+}
+
+static void screen_cursor_up(term_screen *screen, unsigned int num, bool scroll) {
+ unsigned int max;
+
+ if (screen->cursor_y < screen->page->scroll_idx) {
+ if (num > screen->cursor_y)
+ num = screen->cursor_y;
+
+ screen_cursor_set(screen, screen->cursor_x, screen->cursor_y - num);
+ } else {
+ max = screen->cursor_y - screen->page->scroll_idx;
+ if (num > max) {
+ if (num < 1)
+ return;
+
+ if (!(screen->flags & TERM_FLAG_HIDE_CURSOR))
+ screen_age_cursor(screen);
+
+ if (scroll)
+ term_page_scroll_down(screen->page, num - max, &screen->attr, screen->age, NULL);
+
+ screen->cursor_y = screen->page->scroll_idx;
+
+ if (!(screen->flags & TERM_FLAG_HIDE_CURSOR))
+ screen_age_cursor(screen);
+ } else {
+ screen_cursor_set(screen, screen->cursor_x, screen->cursor_y - num);
+ }
+ }
+}
+
+static void screen_cursor_down(term_screen *screen, unsigned int num, bool scroll) {
+ unsigned int max;
+
+ if (screen->cursor_y >= screen->page->scroll_idx + screen->page->scroll_num) {
+ if (num > screen->page->height)
+ num = screen->page->height;
+
+ screen_cursor_set(screen, screen->cursor_x, screen->cursor_y - num);
+ } else {
+ max = screen->page->scroll_idx + screen->page->scroll_num - 1 - screen->cursor_y;
+ if (num > max) {
+ if (num < 1)
+ return;
+
+ if (!(screen->flags & TERM_FLAG_HIDE_CURSOR))
+ screen_age_cursor(screen);
+
+ if (scroll)
+ term_page_scroll_up(screen->page, num - max, &screen->attr, screen->age, screen->history);
+
+ screen->cursor_y = screen->page->scroll_idx + screen->page->scroll_num - 1;
+
+ if (!(screen->flags & TERM_FLAG_HIDE_CURSOR))
+ screen_age_cursor(screen);
+ } else {
+ screen_cursor_set(screen, screen->cursor_x, screen->cursor_y + num);
+ }
+ }
+}
+
+static inline void set_reset(term_screen *screen, unsigned int flag, bool set) {
+ if (set)
+ screen->flags |= flag;
+ else
+ screen->flags &= ~flag;
+}
+
+static void screen_mode_change(term_screen *screen, unsigned int mode, bool dec, bool set) {
+ switch (mode) {
+ case 1:
+ if (dec) {
+ /*
+ * DECCKM: cursor-keys
+ * TODO
+ */
+ set_reset(screen, TERM_FLAG_CURSOR_KEYS, set);
+ }
+
+ break;
+ case 6:
+ if (dec) {
+ /*
+ * DECOM: origin-mode
+ * TODO
+ */
+ set_reset(screen, TERM_FLAG_ORIGIN_MODE, set);
+ }
+
+ break;
+ case 7:
+ if (dec) {
+ /*
+ * DECAWN: auto-wrap mode
+ * TODO
+ */
+ set_reset(screen, TERM_FLAG_AUTO_WRAP, set);
+ }
+
+ break;
+ case 20:
+ if (!dec) {
+ /*
+ * LNM: line-feed/new-line mode
+ * TODO
+ */
+ set_reset(screen, TERM_FLAG_NEWLINE_MODE, set);
+ }
+
+ break;
+ case 25:
+ if (dec) {
+ /*
+ * DECTCEM: text-cursor-enable
+ * TODO
+ */
+ set_reset(screen, TERM_FLAG_HIDE_CURSOR, !set);
+ }
+
+ break;
+ }
+}
+
+/* map a character according to current GL and GR maps */
+static uint32_t screen_map(term_screen *screen, uint32_t val) {
+ uint32_t nval = -1U;
+
+ /* 32 and 127 always map to identity. 160 and 255 map to identity iff a
+ * 96 character set is loaded into GR. Values above 255 always map to
+ * identity. */
+ switch (val) {
+ case 33 ... 126:
+ if (screen->glt) {
+ nval = (**screen->glt)[val - 32];
+ screen->glt = NULL;
+ } else {
+ nval = (**screen->gl)[val - 32];
+ }
+ break;
+ case 160 ... 255:
+ if (screen->grt) {
+ nval = (**screen->grt)[val - 160];
+ screen->grt = NULL;
+ } else {
+ nval = (**screen->gr)[val - 160];
+ }
+ break;
+ }
+
+ return (nval == -1U) ? val : nval;
+}
+
+/*
+ * Command Handlers
+ * This is the inofficial documentation of all the TERM_CMD_* definitions. Each
+ * handled command has a separate function with an extensive comment on the
+ * semantics of the command.
+ * Note that many semantics are unknown and need to be verified. This is mostly
+ * about error-handling, though. Applications rarely rely on those features.
+ */
+
+static int screen_DA1(term_screen *screen, const term_seq *seq);
+static int screen_LF(term_screen *screen, const term_seq *seq);
+
+static int screen_GRAPHIC(term_screen *screen, const term_seq *seq) {
+ term_char_t ch = TERM_CHAR_NULL;
+ uint32_t c;
+
+ if (screen->cursor_x + 1 == screen->page->width
+ && screen->flags & TERM_FLAG_PENDING_WRAP
+ && screen->flags & TERM_FLAG_AUTO_WRAP) {
+ screen_cursor_down(screen, 1, true);
+ screen_cursor_set(screen, 0, screen->cursor_y);
+ }
+
+ screen_cursor_clear_wrap(screen);
+
+ c = screen_map(screen, seq->terminator);
+ ch = term_char_merge(ch, screen_map(screen, c));
+ term_page_write(screen->page, screen->cursor_x, screen->cursor_y, ch, 1, &screen->attr, screen->age, false);
+
+ if (screen->cursor_x + 1 == screen->page->width)
+ screen->flags |= TERM_FLAG_PENDING_WRAP;
+ else
+ screen_cursor_right(screen, 1);
+
+ return 0;
+}
+
+static int screen_BEL(term_screen *screen, const term_seq *seq) {
+ /*
+ * BEL - sound bell tone
+ * This command should trigger an acoustic bell. Usually, this is
+ * forwarded directly to the pcspkr. However, bells have become quite
+ * uncommon and annoying, so we're not implementing them here. Instead,
+ * it's one of the commands we forward to the caller.
+ */
+
+ return screen_forward(screen, TERM_CMD_BEL, seq);
+}
+
+static int screen_BS(term_screen *screen, const term_seq *seq) {
+ /*
+ * BS - backspace
+ * Move cursor one cell to the left. If already at the left margin,
+ * nothing happens.
+ */
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_left(screen, 1);
+ return 0;
+}
+
+static int screen_CBT(term_screen *screen, const term_seq *seq) {
+ /*
+ * CBT - cursor-backward-tabulation
+ * Move the cursor @args[0] tabs backwards (to the left). The
+ * current cursor cell, in case it's a tab, is not counted.
+ * Furthermore, the cursor cannot be moved beyond position 0 and
+ * it will stop there.
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_left_tab(screen, num);
+
+ return 0;
+}
+
+static int screen_CHA(term_screen *screen, const term_seq *seq) {
+ /*
+ * CHA - cursor-horizontal-absolute
+ * Move the cursor to position @args[0] in the current line. The
+ * cursor cannot be moved beyond the rightmost cell and will stop
+ * there.
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int pos = 1;
+
+ if (seq->args[0] > 0)
+ pos = seq->args[0];
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_set(screen, pos - 1, screen->cursor_y);
+
+ return 0;
+}
+
+static int screen_CHT(term_screen *screen, const term_seq *seq) {
+ /*
+ * CHT - cursor-horizontal-forward-tabulation
+ * Move the cursor @args[0] tabs forward (to the right). The
+ * current cursor cell, in case it's a tab, is not counted.
+ * Furthermore, the cursor cannot be moved beyond the rightmost cell
+ * and will stop there.
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_right_tab(screen, num);
+
+ return 0;
+}
+
+static int screen_CNL(term_screen *screen, const term_seq *seq) {
+ /*
+ * CNL - cursor-next-line
+ * Move the cursor @args[0] lines down.
+ *
+ * TODO: Does this stop at the bottom or cause a scroll-up?
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_down(screen, num, false);
+
+ return 0;
+}
+
+static int screen_CPL(term_screen *screen, const term_seq *seq) {
+ /*
+ * CPL - cursor-preceding-line
+ * Move the cursor @args[0] lines up.
+ *
+ * TODO: Does this stop at the top or cause a scroll-up?
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_up(screen, num, false);
+
+ return 0;
+}
+
+static int screen_CR(term_screen *screen, const term_seq *seq) {
+ /*
+ * CR - carriage-return
+ * Move the cursor to the left margin on the current line.
+ */
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_set(screen, 0, screen->cursor_y);
+
+ return 0;
+}
+
+static int screen_CUB(term_screen *screen, const term_seq *seq) {
+ /*
+ * CUB - cursor-backward
+ * Move the cursor @args[0] positions to the left. The cursor stops
+ * at the left-most position.
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_left(screen, num);
+
+ return 0;
+}
+
+static int screen_CUD(term_screen *screen, const term_seq *seq) {
+ /*
+ * CUD - cursor-down
+ * Move the cursor @args[0] positions down. The cursor stops at the
+ * bottom margin. If it was already moved further, it stops at the
+ * bottom line.
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_down(screen, num, false);
+
+ return 0;
+}
+
+static int screen_CUF(term_screen *screen, const term_seq *seq) {
+ /*
+ * CUF -cursor-forward
+ * Move the cursor @args[0] positions to the right. The cursor stops
+ * at the right-most position.
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_right(screen, num);
+
+ return 0;
+}
+
+static int screen_CUP(term_screen *screen, const term_seq *seq) {
+ /*
+ * CUP - cursor-position
+ * Moves the cursor to position @args[1] x @args[0]. If either is 0, it
+ * is treated as 1. The positions are subject to the origin-mode and
+ * clamped to the addressable with/height.
+ *
+ * Defaults:
+ * args[0]: 1
+ * args[1]: 1
+ */
+
+ unsigned int x = 1, y = 1;
+
+ if (seq->args[0] > 0)
+ y = seq->args[0];
+ if (seq->args[1] > 0)
+ x = seq->args[1];
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_set_rel(screen, x - 1, y - 1);
+
+ return 0;
+}
+
+static int screen_CUU(term_screen *screen, const term_seq *seq) {
+ /*
+ * CUU - cursor-up
+ * Move the cursor @args[0] positions up. The cursor stops at the
+ * top margin. If it was already moved further, it stops at the
+ * top line.
+ *
+ * Defaults:
+ * args[0]: 1
+ *
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_up(screen, num, false);
+
+ return 0;
+}
+
+static int screen_DA1(term_screen *screen, const term_seq *seq) {
+ /*
+ * DA1 - primary-device-attributes
+ * The primary DA asks for basic terminal features. We simply return
+ * a hard-coded list of features we implement.
+ * Note that the primary DA asks for supported features, not currently
+ * enabled features.
+ *
+ * The terminal's answer is:
+ * ^[ ? 64 ; ARGS c
+ * The first argument, 64, is fixed and denotes a VT420, the last
+ * DEC-term that extended this number.
+ * All following arguments denote supported features. Note
+ * that at most 15 features can be sent (max CSI args). It is safe to
+ * send more, but clients might not be able to parse them. This is a
+ * client's problem and we shouldn't care. There is no other way to
+ * send those feature lists, so we have to extend them beyond 15 in
+ * those cases.
+ *
+ * Known modes:
+ * 1: 132 column mode
+ * The 132 column mode is supported by the terminal.
+ * 2: printer port
+ * A priner-port is supported and can be addressed via
+ * control-codes.
+ * 3: ReGIS graphics
+ * Support for ReGIS graphics is available. The ReGIS routines
+ * provide the "remote graphics instruction set" and allow basic
+ * vector-rendering.
+ * 4: sixel
+ * Support of Sixel graphics is available. This provides access
+ * to the sixel bitmap routines.
+ * 6: selective erase
+ * The terminal supports DECSCA and related selective-erase
+ * functions. This allows to protect specific cells from being
+ * erased, if specified.
+ * 7: soft character set (DRCS)
+ * TODO: ?
+ * 8: user-defined keys (UDKs)
+ * TODO: ?
+ * 9: national-replacement character sets (NRCS)
+ * National-replacement character-sets are available.
+ * 12: Yugoslavian (SCS)
+ * TODO: ?
+ * 15: technical character set
+ * The DEC technical-character-set is available.
+ * 18: windowing capability
+ * TODO: ?
+ * 21: horizontal scrolling
+ * TODO: ?
+ * 22: ANSII color
+ * TODO: ?
+ * 23: Greek
+ * TODO: ?
+ * 24: Turkish
+ * TODO: ?
+ * 29: ANSI text locator
+ * TODO: ?
+ * 42: ISO Latin-2 character set
+ * TODO: ?
+ * 44: PCTerm
+ * TODO: ?
+ * 45: soft keymap
+ * TODO: ?
+ * 46: ASCII emulation
+ * TODO: ?
+ */
+
+ return SEQ_WRITE(screen, C0_CSI, C1_CSI, "?64;1;6;9;15c");
+}
+
+static int screen_DA2(term_screen *screen, const term_seq *seq) {
+ /*
+ * DA2 - secondary-device-attributes
+ * The secondary DA asks for the terminal-ID, firmware versions and
+ * other non-primary attributes. All these values are
+ * informational-only and should not be used by the host to detect
+ * terminal features.
+ *
+ * The terminal's response is:
+ * ^[ > 61 ; FIRMWARE ; KEYBOARD c
+ * whereas 65 is fixed for VT525 terminals, the last terminal-line that
+ * increased this number. FIRMWARE is the firmware
+ * version encoded as major/minor (20 == 2.0) and KEYBOARD is 0 for STD
+ * keyboard and 1 for PC keyboards.
+ *
+ * We replace the firmware-version with the systemd-version so clients
+ * can decode it again.
+ */
+
+ return SEQ_WRITE(screen, C0_CSI, C1_CSI, ">65;" PACKAGE_VERSION ";1c");
+}
+
+static int screen_DA3(term_screen *screen, const term_seq *seq) {
+ /*
+ * DA3 - tertiary-device-attributes
+ * The tertiary DA is used to query the terminal-ID.
+ *
+ * The terminal's response is:
+ * ^P ! | XX AA BB CC ^\
+ * whereas all four parameters are hexadecimal-encoded pairs. XX
+ * denotes the manufacturing site, AA BB CC is the terminal's ID.
+ */
+
+ /* we do not support tertiary DAs */
+ return 0;
+}
+
+static int screen_DC1(term_screen *screen, const term_seq *seq) {
+ /*
+ * DC1 - device-control-1 or XON
+ * This clears any previous XOFF and resumes terminal-transmission.
+ */
+
+ /* we do not support XON */
+ return 0;
+}
+
+static int screen_DC3(term_screen *screen, const term_seq *seq) {
+ /*
+ * DC3 - device-control-3 or XOFF
+ * Stops terminal transmission. No further characters are sent until
+ * an XON is received.
+ */
+
+ /* we do not support XOFF */
+ return 0;
+}
+
+static int screen_DCH(term_screen *screen, const term_seq *seq) {
+ /*
+ * DCH - delete-character
+ * This deletes @argv[0] characters at the current cursor position. As
+ * characters are deleted, the remaining characters between the cursor
+ * and right margin move to the left. Character attributes move with the
+ * characters. The terminal adds blank spaces with no visual character
+ * attributes at the right margin. DCH has no effect outside the
+ * scrolling margins.
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ screen_cursor_clear_wrap(screen);
+ term_page_delete_cells(screen->page, screen->cursor_x, screen->cursor_y, num, &screen->attr, screen->age);
+
+ return 0;
+}
+
+static int screen_DECALN(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECALN - screen-alignment-pattern
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECANM(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECANM - ansi-mode
+ * Set the terminal into VT52 compatibility mode. Control sequences
+ * overlap with regular sequences so we have to detect them early before
+ * dispatching them.
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECBI(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECBI - back-index
+ * This control function moves the cursor backward one column. If the
+ * cursor is at the left margin, then all screen data within the margin
+ * moves one column to the right. The column that shifted past the right
+ * margin is lost.
+ * DECBI adds a new column at the left margin with no visual attributes.
+ * DECBI does not affect the margins. If the cursor is beyond the
+ * left-margin at the left border, then the terminal ignores DECBI.
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECCARA(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECCARA - change-attributes-in-rectangular-area
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECCRA(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECCRA - copy-rectangular-area
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECDC(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECDC - delete-column
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECDHL_BH(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECDHL_BH - double-width-double-height-line: bottom half
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECDHL_TH(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECDHL_TH - double-width-double-height-line: top half
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECDWL(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECDWL - double-width-single-height-line
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECEFR(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECEFR - enable-filter-rectangle
+ * Defines the coordinates of a filter rectangle (top, left, bottom,
+ * right as @args[0] to @args[3]) and activates it.
+ * Anytime the locator is detected outside of the filter rectangle, an
+ * outside rectangle event is generated and the rectangle is disabled.
+ * Filter rectangles are always treated as "one-shot" events. Any
+ * parameters that are omitted default to the current locator position.
+ * If all parameters are omitted, any locator motion will be reported.
+ * DECELR always cancels any prevous rectangle definition.
+ *
+ * The locator is usually associated with the mouse-cursor, but based
+ * on cells instead of pixels. See DECELR how to initialize and enable
+ * it. DECELR can also enable pixel-mode instead of cell-mode.
+ *
+ * TODO: implement
+ */
+
+ return 0;
+}
+
+static int screen_DECELF(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECELF - enable-local-functions
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECELR(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECELR - enable-locator-reporting
+ * This changes the locator-reporting mode. @args[0] specifies the mode
+ * to set, 0 disables locator-reporting, 1 enables it continously, 2
+ * enables it for a single report. @args[1] specifies the
+ * precision-mode. 0 and 2 set the reporting to cell-precision, 1 sets
+ * pixel-precision.
+ *
+ * Defaults:
+ * args[0]: 0
+ * args[1]: 0
+ *
+ * TODO: implement
+ */
+
+ return 0;
+}
+
+static int screen_DECERA(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECERA - erase-rectangular-area
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECFI(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECFI - forward-index
+ * This control function moves the cursor forward one column. If the
+ * cursor is at the right margin, then all screen data within the
+ * margins moves one column to the left. The column shifted past the
+ * left margin is lost.
+ * DECFI adds a new column at the right margin, with no visual
+ * attributes. DECFI does not affect margins. If the cursor is beyond
+ * the right margin at the border of the page when the terminal
+ * receives DECFI, then the terminal ignores DECFI.
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECFRA(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECFRA - fill-rectangular-area
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECIC(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECIC - insert-column
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECID(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECID - return-terminal-id
+ * This is an obsolete form of TERM_CMD_DA1.
+ */
+
+ return screen_DA1(screen, seq);
+}
+
+static int screen_DECINVM(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECINVM - invoke-macro
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECKBD(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECKBD - keyboard-language-selection
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECKPAM(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECKPAM - keypad-application-mode
+ * Enables the keypad-application mode. If enabled, the keypad sends
+ * special characters instead of the printed characters. This way,
+ * applications can detect whether a numeric key was pressed on the
+ * top-row or on the keypad.
+ * Default is keypad-numeric-mode.
+ */
+
+ screen->flags |= TERM_FLAG_KEYPAD_MODE;
+
+ return 0;
+}
+
+static int screen_DECKPNM(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECKPNM - keypad-numeric-mode
+ * This disables the keypad-application-mode (DECKPAM) and returns to
+ * the keypad-numeric-mode. Keypresses on the keypad generate the same
+ * sequences as corresponding keypresses on the main keyboard.
+ * Default is keypad-numeric-mode.
+ */
+
+ screen->flags &= ~TERM_FLAG_KEYPAD_MODE;
+
+ return 0;
+}
+
+static int screen_DECLFKC(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECLFKC - local-function-key-control
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECLL(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECLL - load-leds
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECLTOD(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECLTOD - load-time-of-day
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECPCTERM(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECPCTERM - pcterm-mode
+ * This enters/exits the PCTerm mode. Default mode is VT-mode. It can
+ * also select parameters for scancode/keycode mappings in SCO mode.
+ *
+ * Definitely not worth implementing. Lets kill PCTerm/SCO modes!
+ */
+
+ return 0;
+}
+
+static int screen_DECPKA(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECPKA - program-key-action
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECPKFMR(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECPKFMR - program-key-free-memory-report
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECRARA(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECRARA - reverse-attributes-in-rectangular-area
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECRC(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECRC - restore-cursor
+ * Restores the terminal to the state saved by the save cursor (DECSC)
+ * function. This includes more than just the cursor-position.
+ *
+ * If nothing was saved by DECSC, then DECRC performs the following
+ * actions:
+ * * Moves the cursor to the home position (upper left of screen).
+ * * Resets origin mode (DECOM).
+ * * Turns all character attributes off (normal setting).
+ * * Maps the ASCII character set into GL, and the DEC Supplemental
+ * Graphic set into GR.
+ *
+ * The terminal maintains a separate DECSC buffer for the main display
+ * and the status line. This feature lets you save a separate operating
+ * state for the main display and the status line.
+ */
+
+ screen->attr = screen->saved.attr;
+ screen->gl = screen->saved.gl;
+ screen->gr = screen->saved.gr;
+ screen->glt = screen->saved.glt;
+ screen->grt = screen->saved.grt;
+ set_reset(screen, TERM_FLAG_AUTO_WRAP, screen->flags & TERM_FLAG_AUTO_WRAP);
+ set_reset(screen, TERM_FLAG_ORIGIN_MODE, screen->flags & TERM_FLAG_ORIGIN_MODE);
+ screen_cursor_set(screen, screen->saved.cursor_x, screen->saved.cursor_y);
+
+ return 0;
+}
+
+static int screen_DECREQTPARM(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECREQTPARM - request-terminal-parameters
+ * The sequence DECREPTPARM is sent by the terminal controller to notify
+ * the host of the status of selected terminal parameters. The status
+ * sequence may be sent when requested by the host or at the terminal's
+ * discretion. DECREPTPARM is sent upon receipt of a DECREQTPARM.
+ *
+ * If @args[0] is 0, this marks a request and the terminal is allowed
+ * to send DECREPTPARM messages without request. If it is 1, the same
+ * applies but the terminal should no longer send DECREPTPARM
+ * unrequested.
+ * 2 and 3 mark a report, but 3 is only used if the terminal answers as
+ * an explicit request with @args[0] == 1.
+ *
+ * The other arguments are ignored in requests, but have the following
+ * meaning in responses:
+ * args[1]: 1=no-parity-set 4=parity-set-and-odd 5=parity-set-and-even
+ * args[2]: 1=8bits-per-char 2=7bits-per-char
+ * args[3]: transmission-speed
+ * args[4]: receive-speed
+ * args[5]: 1=bit-rate-multiplier-is-16
+ * args[6]: This value communicates the four switch values in block 5
+ * of SETUP B, which are only visible to the user when an STP
+ * option is installed. These bits may be assigned for an STP
+ * device. The four bits are a decimal-encoded binary number.
+ * Value between 0-15.
+ *
+ * The transmission/receive speeds have mappings for number => bits/s
+ * which are quite weird. Examples are: 96->3600, 112->9600, 120->19200
+ *
+ * Defaults:
+ * args[0]: 0
+ */
+
+ if (seq->n_args < 1 || seq->args[0] == 0) {
+ screen->flags &= ~TERM_FLAG_INHIBIT_TPARM;
+ return SEQ_WRITE(screen, C0_CSI, C1_CSI, "2;1;1;120;120;1;0x");
+ } else if (seq->args[0] == 1) {
+ screen->flags |= TERM_FLAG_INHIBIT_TPARM;
+ return SEQ_WRITE(screen, C0_CSI, C1_CSI, "3;1;1;120;120;1;0x");
+ } else {
+ return 0;
+ }
+}
+
+static int screen_DECRPKT(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECRPKT - report-key-type
+ * Response to DECRQKT, we can safely ignore it as we're the one sending
+ * it to the host.
+ */
+
+ return 0;
+}
+
+static int screen_DECRQCRA(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECRQCRA - request-checksum-of-rectangular-area
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECRQDE(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECRQDE - request-display-extent
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECRQKT(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECRQKT - request-key-type
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECRQLP(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECRQLP - request-locator-position
+ * See DECELR for locator-information.
+ *
+ * TODO: document and implement
+ */
+
+ return 0;
+}
+
+static int screen_DECRQM_ANSI(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECRQM_ANSI - request-mode-ansi
+ * The host sends this control function to find out if a particular mode
+ * is set or reset. The terminal responds with a report mode function.
+ * @args[0] contains the mode to query.
+ *
+ * Response is DECRPM with the first argument set to the mode that was
+ * queried, second argument is 0 if mode is invalid, 1 if mode is set,
+ * 2 if mode is not set (reset), 3 if mode is permanently set and 4 if
+ * mode is permanently not set (reset):
+ * ANSI: ^[ MODE ; VALUE $ y
+ * DEC: ^[ ? MODE ; VALUE $ y
+ *
+ * TODO: implement
+ */
+
+ return 0;
+}
+
+static int screen_DECRQM_DEC(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECRQM_DEC - request-mode-dec
+ * Same as DECRQM_ANSI but for DEC modes.
+ *
+ * TODO: implement
+ */
+
+ return 0;
+}
+
+static int screen_DECRQPKFM(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECRQPKFM - request-program-key-free-memory
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECRQPSR(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECRQPSR - request-presentation-state-report
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECRQTSR(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECRQTSR - request-terminal-state-report
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECRQUPSS(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECRQUPSS - request-user-preferred-supplemental-set
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSACE(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSACE - select-attribute-change-extent
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSASD(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSASD - select-active-status-display
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSC(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSC - save-cursor
+ * Save cursor and terminal state so it can be restored later on.
+ * Saves the following items in the terminal's memory:
+ * * Cursor position
+ * * Character attributes set by the SGR command
+ * * Character sets (G0, G1, G2, or G3) currently in GL and GR
+ * * Wrap flag (autowrap or no autowrap)
+ * * State of origin mode (DECOM)
+ * * Selective erase attribute
+ * * Any single shift 2 (SS2) or single shift 3 (SS3) functions sent
+ */
+
+ screen->saved.cursor_x = screen->cursor_x;
+ screen->saved.cursor_y = screen->cursor_y;
+ screen->saved.attr = screen->attr;
+ screen->saved.gl = screen->gl;
+ screen->saved.gr = screen->gr;
+ screen->saved.glt = screen->glt;
+ screen->saved.grt = screen->grt;
+ screen->saved.flags = screen->flags & (TERM_FLAG_AUTO_WRAP
+ | TERM_FLAG_ORIGIN_MODE);
+
+ return 0;
+}
+
+static int screen_DECSCA(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSCA - select-character-protection-attribute
+ * Defines the characters that come after it as erasable or not erasable
+ * from the screen. The selective erase control functions (DECSED and
+ * DECSEL) can only erase characters defined as erasable.
+ *
+ * @args[0] specifies the new mode. 0 and 2 mark any following character
+ * as erasable, 1 marks it as not erasable.
+ *
+ * Defaults:
+ * args[0]: 0
+ */
+
+ unsigned int mode = 0;
+
+ if (seq->args[0] > 0)
+ mode = seq->args[0];
+
+ switch (mode) {
+ case 0:
+ case 2:
+ screen->attr.protect = 0;
+ break;
+ case 1:
+ screen->attr.protect = 1;
+ break;
+ }
+
+ return 0;
+}
+
+static int screen_DECSCL(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSCL - select-conformance-level
+ * Select the terminal's operating level. The factory default is
+ * level 4 (VT Level 4 mode, 7-bit controls).
+ * When you change the conformance level, the terminal performs a hard
+ * reset (RIS).
+ *
+ * @args[0] defines the conformance-level, valid values are:
+ * 61: Level 1 (VT100)
+ * 62: Level 2 (VT200)
+ * 63: Level 3 (VT300)
+ * 64: Level 4 (VT400)
+ * @args[1] defines the 8bit-mode, valid values are:
+ * 0: 8-bit controls
+ * 1: 7-bit controls
+ * 2: 8-bit controls (same as 0)
+ *
+ * If @args[0] is 61, then @args[1] is ignored and 7bit controls are
+ * enforced.
+ *
+ * Defaults:
+ * args[0]: 64
+ * args[1]: 0
+ */
+
+ unsigned int level = 64, bit = 0;
+
+ if (seq->n_args > 0) {
+ level = seq->args[0];
+ if (seq->n_args > 1)
+ bit = seq->args[1];
+ }
+
+ term_screen_hard_reset(screen);
+
+ switch (level) {
+ case 61:
+ screen->conformance_level = TERM_CONFORMANCE_LEVEL_VT100;
+ screen->flags |= TERM_FLAG_7BIT_MODE;
+ break;
+ case 62 ... 69:
+ screen->conformance_level = TERM_CONFORMANCE_LEVEL_VT400;
+ if (bit == 1)
+ screen->flags |= TERM_FLAG_7BIT_MODE;
+ else
+ screen->flags &= ~TERM_FLAG_7BIT_MODE;
+ break;
+ }
+
+ return 0;
+}
+
+static int screen_DECSCP(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSCP - select-communication-port
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSCPP(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSCPP - select-columns-per-page
+ * Select columns per page. The number of rows is unaffected by this.
+ * @args[0] selectes the number of columns (width), DEC only defines 80
+ * and 132, but we allow any integer here. 0 is equivalent to 80.
+ * Page content is *not* cleared and the cursor is left untouched.
+ * However, if the page is reduced in width and the cursor would be
+ * outside the visible region, it's set to the right border. Newly added
+ * cells are cleared. No data is retained outside the visible region.
+ *
+ * Defaults:
+ * args[0]: 0
+ *
+ * TODO: implement
+ */
+
+ return 0;
+}
+
+static int screen_DECSCS(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSCS - select-communication-speed
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSCUSR(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSCUSR - set-cursor-style
+ * This changes the style of the cursor. @args[0] can be one of:
+ * 0, 1: blinking block
+ * 2: steady block
+ * 3: blinking underline
+ * 4: steady underline
+ * Changing this setting does _not_ affect the cursor visibility itself.
+ * Use DECTCEM for that.
+ *
+ * Defaults:
+ * args[0]: 0
+ *
+ * TODO: implement
+ */
+
+ return 0;
+}
+
+static int screen_DECSDDT(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSDDT - select-disconnect-delay-time
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSDPT(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSDPT - select-digital-printed-data-type
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSED(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSED - selective-erase-in-display
+ * This control function erases some or all of the erasable characters
+ * in the display. DECSED can only erase characters defined as erasable
+ * by the DECSCA control function. DECSED works inside or outside the
+ * scrolling margins.
+ *
+ * @args[0] defines which regions are erased. If it is 0, all cells from
+ * the cursor (inclusive) till the end of the display are erase. If it
+ * is 1, all cells from the start of the display till the cursor
+ * (inclusive) are erased. If it is 2, all cells are erased.
+ *
+ * Defaults:
+ * args[0]: 0
+ */
+
+ unsigned int mode = 0;
+
+ if (seq->args[0] > 0)
+ mode = seq->args[0];
+
+ switch (mode) {
+ case 0:
+ term_page_erase(screen->page,
+ screen->cursor_x, screen->cursor_y,
+ screen->page->width, screen->page->height,
+ &screen->attr, screen->age, true);
+ break;
+ case 1:
+ term_page_erase(screen->page,
+ 0, 0,
+ screen->cursor_x, screen->cursor_y,
+ &screen->attr, screen->age, true);
+ break;
+ case 2:
+ term_page_erase(screen->page,
+ 0, 0,
+ screen->page->width, screen->page->height,
+ &screen->attr, screen->age, true);
+ break;
+ }
+
+ return 0;
+}
+
+static int screen_DECSEL(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSEL - selective-erase-in-line
+ * This control function erases some or all of the erasable characters
+ * in a single line of text. DECSEL erases only those characters defined
+ * as erasable by the DECSCA control function. DECSEL works inside or
+ * outside the scrolling margins.
+ *
+ * @args[0] defines the region to be erased. If it is 0, all cells from
+ * the cursor (inclusive) till the end of the line are erase. If it is
+ * 1, all cells from the start of the line till the cursor (inclusive)
+ * are erased. If it is 2, the whole line of the cursor is erased.
+ *
+ * Defaults:
+ * args[0]: 0
+ */
+
+ unsigned int mode = 0;
+
+ if (seq->args[0] > 0)
+ mode = seq->args[0];
+
+ switch (mode) {
+ case 0:
+ term_page_erase(screen->page,
+ screen->cursor_x, screen->cursor_y,
+ screen->page->width, screen->cursor_y,
+ &screen->attr, screen->age, true);
+ break;
+ case 1:
+ term_page_erase(screen->page,
+ 0, screen->cursor_y,
+ screen->cursor_x, screen->cursor_y,
+ &screen->attr, screen->age, true);
+ break;
+ case 2:
+ term_page_erase(screen->page,
+ 0, screen->cursor_y,
+ screen->page->width, screen->cursor_y,
+ &screen->attr, screen->age, true);
+ break;
+ }
+
+ return 0;
+}
+
+static int screen_DECSERA(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSERA - selective-erase-rectangular-area
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSFC(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSFC - select-flow-control
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSKCV(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSKCV - set-key-click-volume
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSLCK(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSLCK - set-lock-key-style
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSLE(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSLE - select-locator-events
+ *
+ * TODO: implement
+ */
+
+ return 0;
+}
+
+static int screen_DECSLPP(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSLPP - set-lines-per-page
+ * Set the number of lines used for the page. @args[0] specifies the
+ * number of lines to be used. DEC only allows a limited number of
+ * choices, however, we allow all integers. 0 is equivalent to 24.
+ *
+ * Defaults:
+ * args[0]: 0
+ *
+ * TODO: implement
+ */
+
+ return 0;
+}
+
+static int screen_DECSLRM_OR_SC(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSLRM_OR_SC - set-left-and-right-margins or save-cursor
+ *
+ * TODO: Detect save-cursor and run it. DECSLRM is not worth
+ * implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSMBV(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSMBV - set-margin-bell-volume
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSMKR(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSMKR - select-modifier-key-reporting
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSNLS(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSNLS - set-lines-per-screen
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSPP(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSPP - set-port-parameter
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSPPCS(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSPPCS - select-pro-printer-character-set
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSPRTT(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSPRTT - select-printer-type
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSR(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSR - secure-reset
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSRFR(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSRFR - select-refresh-rate
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSSCLS(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSSCLS - set-scroll-speed
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSSDT(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSSDT - select-status-display-line-type
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSSL(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSSL - select-setup-language
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECST8C(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECST8C - set-tab-at-every-8-columns
+ * Clear the tab-ruler and reset it to a tab at every 8th column,
+ * starting at 9 (though, setting a tab at 1 is fine as it has no
+ * effect).
+ */
+
+ unsigned int i;
+
+ for (i = 0; i < screen->page->width; i += 8)
+ screen->tabs[i / 8] = 0x1;
+
+ return 0;
+}
+
+static int screen_DECSTBM(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSTBM - set-top-and-bottom-margins
+ * This control function sets the top and bottom margins for the current
+ * page. You cannot perform scrolling outside the margins.
+ *
+ * @args[0] defines the top margin, @args[1] defines the bottom margin.
+ * The bottom margin must be lower than the top-margin.
+ *
+ * This call resets the cursor position to 0/0 of the page.
+ *
+ * Defaults:
+ * args[0]: 1
+ * args[1]: last page-line
+ */
+
+ unsigned int top, bottom;
+
+ top = 1;
+ bottom = screen->page->height;
+
+ if (seq->args[0] > 0)
+ top = seq->args[0];
+ if (seq->args[1] > 0)
+ bottom = seq->args[1];
+
+ if (top > screen->page->height)
+ top = screen->page->height;
+ if (bottom > screen->page->height)
+ bottom = screen->page->height;
+
+ if (top >= bottom || top > screen->page->height || bottom > screen->page->height) {
+ top = 1;
+ bottom = screen->page->height;
+ }
+
+ term_page_set_scroll_region(screen->page_main, top - 1, bottom - top + 1);
+ term_page_set_scroll_region(screen->page_alt, top - 1, bottom - top + 1);
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_set(screen, 0, 0);
+
+ return 0;
+}
+
+static int screen_DECSTR(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSTR - soft-terminal-reset
+ * Perform a soft reset to the default values.
+ */
+
+ term_screen_soft_reset(screen);
+
+ return 0;
+}
+
+static int screen_DECSTRL(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSTRL - set-transmit-rate-limit
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSWBV(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSWBV - set-warning-bell-volume
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECSWL(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECSWL - single-width-single-height-line
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECTID(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECTID - select-terminal-id
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECTME(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECTME - terminal-mode-emulation
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DECTST(term_screen *screen, const term_seq *seq) {
+ /*
+ * DECTST - invoke-confidence-test
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_DL(term_screen *screen, const term_seq *seq) {
+ /*
+ * DL - delete-line
+ * This control function deletes one or more lines in the scrolling
+ * region, starting with the line that has the cursor. @args[0] defines
+ * the number of lines to delete. 0 is treated the same as 1.
+ * As lines are deleted, lines below the cursor and in the scrolling
+ * region move up. The terminal adds blank lines with no visual
+ * character attributes at the bottom of the scrolling region. If it is
+ * greater than the number of lines remaining on the page, DL deletes
+ * only the remaining lines. DL has no effect outside the scrolling
+ * margins.
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ term_page_delete_lines(screen->page, screen->cursor_y, num, &screen->attr, screen->age);
+
+ return 0;
+}
+
+static int screen_DSR_ANSI(term_screen *screen, const term_seq *seq) {
+ /*
+ * DSR_ANSI - device-status-report-ansi
+ *
+ * TODO: implement
+ */
+
+ return 0;
+}
+
+static int screen_DSR_DEC(term_screen *screen, const term_seq *seq) {
+ /*
+ * DSR_DEC - device-status-report-dec
+ *
+ * TODO: implement
+ */
+
+ return 0;
+}
+
+static int screen_ECH(term_screen *screen, const term_seq *seq) {
+ /*
+ * ECH - erase-character
+ * This control function erases one or more characters, from the cursor
+ * position to the right. ECH clears character attributes from erased
+ * character positions. ECH works inside or outside the scrolling
+ * margins.
+ * @args[0] defines the number of characters to erase. 0 is treated the
+ * same as 1.
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ term_page_erase(screen->page,
+ screen->cursor_x, screen->cursor_y,
+ screen->cursor_x + num, screen->cursor_y,
+ &screen->attr, screen->age, false);
+
+ return 0;
+}
+
+static int screen_ED(term_screen *screen, const term_seq *seq) {
+ /*
+ * ED - erase-in-display
+ * This control function erases characters from part or all of the
+ * display. When you erase complete lines, they become single-height,
+ * single-width lines, with all visual character attributes cleared. ED
+ * works inside or outside the scrolling margins.
+ *
+ * @args[0] defines the region to erase. 0 means from cursor (inclusive)
+ * till the end of the screen. 1 means from the start of the screen till
+ * the cursor (inclusive) and 2 means the whole screen.
+ *
+ * Defaults:
+ * args[0]: 0
+ */
+
+ unsigned int mode = 0;
+
+ if (seq->args[0] > 0)
+ mode = seq->args[0];
+
+ switch (mode) {
+ case 0:
+ term_page_erase(screen->page,
+ screen->cursor_x, screen->cursor_y,
+ screen->page->width, screen->page->height,
+ &screen->attr, screen->age, false);
+ break;
+ case 1:
+ term_page_erase(screen->page,
+ 0, 0,
+ screen->cursor_x, screen->cursor_y,
+ &screen->attr, screen->age, false);
+ break;
+ case 2:
+ term_page_erase(screen->page,
+ 0, 0,
+ screen->page->width, screen->page->height,
+ &screen->attr, screen->age, false);
+ break;
+ }
+
+ return 0;
+}
+
+static int screen_EL(term_screen *screen, const term_seq *seq) {
+ /*
+ * EL - erase-in-line
+ * This control function erases characters on the line that has the
+ * cursor. EL clears all character attributes from erased character
+ * positions. EL works inside or outside the scrolling margins.
+ *
+ * @args[0] defines the region to erase. 0 means from cursor (inclusive)
+ * till the end of the line. 1 means from the start of the line till the
+ * cursor (inclusive) and 2 means the whole line.
+ *
+ * Defaults:
+ * args[0]: 0
+ */
+
+ unsigned int mode = 0;
+
+ if (seq->args[0] > 0)
+ mode = seq->args[0];
+
+ switch (mode) {
+ case 0:
+ term_page_erase(screen->page,
+ screen->cursor_x, screen->cursor_y,
+ screen->page->width, screen->cursor_y,
+ &screen->attr, screen->age, false);
+ break;
+ case 1:
+ term_page_erase(screen->page,
+ 0, screen->cursor_y,
+ screen->cursor_x, screen->cursor_y,
+ &screen->attr, screen->age, false);
+ break;
+ case 2:
+ term_page_erase(screen->page,
+ 0, screen->cursor_y,
+ screen->page->width, screen->cursor_y,
+ &screen->attr, screen->age, false);
+ break;
+ }
+
+ return 0;
+}
+
+static int screen_ENQ(term_screen *screen, const term_seq *seq) {
+ /*
+ * ENQ - enquiry
+ * Transmit the answerback-string. If none is set, do nothing.
+ */
+
+ if (screen->answerback)
+ return screen_write(screen, screen->answerback, strlen(screen->answerback));
+
+ return 0;
+}
+
+static int screen_EPA(term_screen *screen, const term_seq *seq) {
+ /*
+ * EPA - end-of-guarded-area
+ *
+ * TODO: What is this?
+ */
+
+ return 0;
+}
+
+static int screen_FF(term_screen *screen, const term_seq *seq) {
+ /*
+ * FF - form-feed
+ * This causes the cursor to jump to the next line. It is treated the
+ * same as LF.
+ */
+
+ return screen_LF(screen, seq);
+}
+
+static int screen_HPA(term_screen *screen, const term_seq *seq) {
+ /*
+ * HPA - horizontal-position-absolute
+ * HPA causes the active position to be moved to the n-th horizontal
+ * position of the active line. If an attempt is made to move the active
+ * position past the last position on the line, then the active position
+ * stops at the last position on the line.
+ *
+ * @args[0] defines the horizontal position. 0 is treated as 1.
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_set(screen, num - 1, screen->cursor_y);
+
+ return 0;
+}
+
+static int screen_HPR(term_screen *screen, const term_seq *seq) {
+ /*
+ * HPR - horizontal-position-relative
+ * HPR causes the active position to be moved to the n-th following
+ * horizontal position of the active line. If an attempt is made to move
+ * the active position past the last position on the line, then the
+ * active position stops at the last position on the line.
+ *
+ * @args[0] defines the horizontal position. 0 is treated as 1.
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_right(screen, num);
+
+ return 0;
+}
+
+static int screen_HT(term_screen *screen, const term_seq *seq) {
+ /*
+ * HT - horizontal-tab
+ * Moves the cursor to the next tab stop. If there are no more tab
+ * stops, the cursor moves to the right margin. HT does not cause text
+ * to auto wrap.
+ */
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_right_tab(screen, 1);
+
+ return 0;
+}
+
+static int screen_HTS(term_screen *screen, const term_seq *seq) {
+ /*
+ * HTS - horizontal-tab-set
+ * HTS sets a horizontal tab stop at the column position indicated by
+ * the value of the active column when the terminal receives an HTS.
+ *
+ * Executing an HTS does not effect the other horizontal tab stop
+ * settings.
+ */
+
+ unsigned int pos;
+
+ pos = screen->cursor_x;
+ if (screen->page->width > 0)
+ screen->tabs[pos / 8] |= 1U << (pos % 8);
+
+ return 0;
+}
+
+static int screen_HVP(term_screen *screen, const term_seq *seq) {
+ /*
+ * HVP - horizontal-and-vertical-position
+ * This control function works the same as the cursor position (CUP)
+ * function. Origin mode (DECOM) selects line numbering and the ability
+ * to move the cursor into margins.
+ *
+ * Defaults:
+ * args[0]: 1
+ * args[1]: 1
+ */
+
+ return screen_CUP(screen, seq);
+}
+
+static int screen_ICH(term_screen *screen, const term_seq *seq) {
+ /*
+ * ICH - insert-character
+ * This control function inserts one or more space (SP) characters
+ * starting at the cursor position. @args[0] is the number of characters
+ * to insert. 0 is treated as 1.
+ *
+ * The ICH sequence inserts blank characters with the normal
+ * character attribute. The cursor remains at the beginning of the blank
+ * characters. Text between the cursor and right margin moves to the
+ * right. Characters scrolled past the right margin are lost. ICH has no
+ * effect outside the scrolling margins.
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ screen_cursor_clear_wrap(screen);
+ term_page_insert_cells(screen->page, screen->cursor_x, screen->cursor_y, num, &screen->attr, screen->age);
+
+ return 0;
+}
+
+static int screen_IL(term_screen *screen, const term_seq *seq) {
+ /*
+ * IL - insert-line
+ * This control function inserts one or more blank lines, starting at
+ * the cursor. @args[0] is the number of lines to insert. 0 is treated
+ * as 1.
+ *
+ * As lines are inserted, lines below the cursor and in the scrolling
+ * region move down. Lines scrolled off the page are lost. IL has no
+ * effect outside the page margins.
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ screen_cursor_clear_wrap(screen);
+ term_page_insert_lines(screen->page, screen->cursor_y, num, &screen->attr, screen->age);
+
+ return 0;
+}
+
+static int screen_IND(term_screen *screen, const term_seq *seq) {
+ /*
+ * IND - index
+ * IND moves the cursor down one line in the same column. If the cursor
+ * is at the bottom margin, then the screen performs a scroll-up.
+ */
+
+ screen_cursor_down(screen, 1, true);
+
+ return 0;
+}
+
+static int screen_LF(term_screen *screen, const term_seq *seq) {
+ /*
+ * LF - line-feed
+ * Causes a line feed or a new line operation, depending on the setting
+ * of line feed/new line mode.
+ */
+
+ screen_cursor_down(screen, 1, true);
+ if (screen->flags & TERM_FLAG_NEWLINE_MODE)
+ screen_cursor_left(screen, screen->cursor_x);
+
+ return 0;
+}
+
+static int screen_LS1R(term_screen *screen, const term_seq *seq) {
+ /*
+ * LS1R - locking-shift-1-right
+ * Map G1 into GR.
+ */
+
+ screen->gr = &screen->g1;
+
+ return 0;
+}
+
+static int screen_LS2(term_screen *screen, const term_seq *seq) {
+ /*
+ * LS2 - locking-shift-2
+ * Map G2 into GL.
+ */
+
+ screen->gl = &screen->g2;
+
+ return 0;
+}
+
+static int screen_LS2R(term_screen *screen, const term_seq *seq) {
+ /*
+ * LS2R - locking-shift-2-right
+ * Map G2 into GR.
+ */
+
+ screen->gr = &screen->g2;
+
+ return 0;
+}
+
+static int screen_LS3(term_screen *screen, const term_seq *seq) {
+ /*
+ * LS3 - locking-shift-3
+ * Map G3 into GL.
+ */
+
+ screen->gl = &screen->g3;
+
+ return 0;
+}
+
+static int screen_LS3R(term_screen *screen, const term_seq *seq) {
+ /*
+ * LS3R - locking-shift-3-right
+ * Map G3 into GR.
+ */
+
+ screen->gr = &screen->g3;
+
+ return 0;
+}
+
+static int screen_MC_ANSI(term_screen *screen, const term_seq *seq) {
+ /*
+ * MC_ANSI - media-copy-ansi
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_MC_DEC(term_screen *screen, const term_seq *seq) {
+ /*
+ * MC_DEC - media-copy-dec
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_NEL(term_screen *screen, const term_seq *seq) {
+ /*
+ * NEL - next-line
+ * Moves cursor to first position on next line. If cursor is at bottom
+ * margin, then screen performs a scroll-up.
+ */
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_down(screen, 1, true);
+ screen_cursor_set(screen, 0, screen->cursor_y);
+
+ return 0;
+}
+
+static int screen_NP(term_screen *screen, const term_seq *seq) {
+ /*
+ * NP - next-page
+ * This control function moves the cursor forward to the home position
+ * on one of the following pages in page memory. If there is only one
+ * page, then the terminal ignores NP.
+ * If NP tries to move the cursor past the last page in memory, then the
+ * cursor stops at the last page.
+ *
+ * @args[0] defines the number of pages to forward. 0 is treated as 1.
+ *
+ * Defaults:
+ * args[0]: 1
+ *
+ * Probably not worth implementing. We only support a single page.
+ */
+
+ return 0;
+}
+
+static int screen_NULL(term_screen *screen, const term_seq *seq) {
+ /*
+ * NULL - null
+ * The NULL operation does nothing. ASCII NULL is always ignored.
+ */
+
+ return 0;
+}
+
+static int screen_PP(term_screen *screen, const term_seq *seq) {
+ /*
+ * PP - preceding-page
+ * This control function moves the cursor backward to the home position
+ * on one of the preceding pages in page memory. If there is only one
+ * page, then the terminal ignores PP.
+ * If PP tries to move the cursor back farther than the first page in
+ * memory, then the cursor stops at the first page.
+ *
+ * @args[0] defines the number of pages to go backwards. 0 is treated
+ * as 1.
+ *
+ * Defaults:
+ * args[0]: 1
+ *
+ * Probably not worth implementing. We only support a single page.
+ */
+
+ return 0;
+}
+
+static int screen_PPA(term_screen *screen, const term_seq *seq) {
+ /*
+ * PPA - page-position-absolute
+ * This control function can move the cursor to the corresponding row
+ * and column on any page in page memory. You select the page by its
+ * number. If there is only one page, then the terminal ignores PPA.
+ *
+ * @args[0] is the number of the page to move the cursor to. If it is
+ * greater than the number of the last page in memory, then the cursor
+ * stops at the last page. If it is less than the number of the first
+ * page, then the cursor stops at the first page.
+ *
+ * Defaults:
+ * args[0]: 1
+ *
+ * Probably not worth implementing. We only support a single page.
+ */
+
+ return 0;
+}
+
+static int screen_PPB(term_screen *screen, const term_seq *seq) {
+ /*
+ * PPB - page-position-backward
+ * This control function moves the cursor backward to the corresponding
+ * row and column on one of the preceding pages in page memory. If there
+ * is only one page, then the terminal ignores PPB.
+ *
+ * @args[0] indicates the number of pages to move the cursor backward.
+ * If it tries to move the cursor back farther than the first page in
+ * memory, then the cursor stops at the first page. 0 is treated as 1.
+ *
+ * Defaults:
+ * args[0]: 1
+ *
+ * Probably not worth implementing. We only support a single page.
+ */
+
+ return 0;
+}
+
+static int screen_PPR(term_screen *screen, const term_seq *seq) {
+ /*
+ * PPR - page-position-relative
+ * This control function moves the cursor forward to the corresponding
+ * row and column on one of the following pages in page memory. If there
+ * is only one page, then the terminal ignores PPR.
+ *
+ * @args[0] indicates how many pages to move the cursor forward. If it
+ * tries to move the cursor beyond the last page in memory, then the
+ * cursor stops at the last page. 0 is treated as 1.
+ *
+ * Defaults:
+ * args[0]: 1
+ *
+ * Probably not worth implementing. We only support a single page.
+ */
+
+ return 0;
+}
+
+static int screen_RC(term_screen *screen, const term_seq *seq) {
+ /*
+ * RC - restore-cursor
+ */
+
+ return screen_DECRC(screen, seq);
+}
+
+static int screen_REP(term_screen *screen, const term_seq *seq) {
+ /*
+ * REP - repeat
+ * Repeat the preceding graphics-character the given number of times.
+ * @args[0] specifies how often it shall be repeated. 0 is treated as 1.
+ *
+ * Defaults:
+ * args[0]: 1
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_RI(term_screen *screen, const term_seq *seq) {
+ /*
+ * RI - reverse-index
+ * Moves the cursor up one line in the same column. If the cursor is at
+ * the top margin, the page scrolls down.
+ */
+
+ screen_cursor_up(screen, 1, true);
+
+ return 0;
+}
+
+static int screen_RIS(term_screen *screen, const term_seq *seq) {
+ /*
+ * RIS - reset-to-initial-state
+ * This control function causes a nonvolatile memory (NVR) recall to
+ * occur. RIS replaces all set-up features with their saved settings.
+ *
+ * The terminal stores these saved settings in NVR memory. The saved
+ * setting for a feature is the same as the factory-default setting,
+ * unless you saved a new setting.
+ */
+
+ term_screen_hard_reset(screen);
+
+ return 0;
+}
+
+static int screen_RM_ANSI(term_screen *screen, const term_seq *seq) {
+ /*
+ * RM_ANSI - reset-mode-ansi
+ *
+ * TODO: implement (see VT510rm manual)
+ */
+
+ unsigned int i;
+
+ for (i = 0; i < seq->n_args; ++i)
+ screen_mode_change(screen, seq->args[i], false, false);
+
+ return 0;
+}
+
+static int screen_RM_DEC(term_screen *screen, const term_seq *seq) {
+ /*
+ * RM_DEC - reset-mode-dec
+ * This is the same as RM_ANSI but for DEC modes.
+ */
+
+ unsigned int i;
+
+ for (i = 0; i < seq->n_args; ++i)
+ screen_mode_change(screen, seq->args[i], true, false);
+
+ return 0;
+}
+
+static int screen_S7C1T(term_screen *screen, const term_seq *seq) {
+ /*
+ * S7C1T - set-7bit-c1-terminal
+ * This causes the terminal to start sending C1 controls as 7bit
+ * sequences instead of 8bit C1 controls.
+ * This is ignored if the terminal is below level-2 emulation mode
+ * (VT100 and below), the terminal already sends 7bit controls then.
+ */
+
+ if (screen->conformance_level > TERM_CONFORMANCE_LEVEL_VT100)
+ screen->flags |= TERM_FLAG_7BIT_MODE;
+
+ return 0;
+}
+
+static int screen_S8C1T(term_screen *screen, const term_seq *seq) {
+ /*
+ * S8C1T - set-8bit-c1-terminal
+ * This causes the terminal to start sending C1 controls as 8bit C1
+ * control instead of 7bit sequences.
+ * This is ignored if the terminal is below level-2 emulation mode
+ * (VT100 and below). The terminal always sends 7bit controls in those
+ * modes.
+ */
+
+ if (screen->conformance_level > TERM_CONFORMANCE_LEVEL_VT100)
+ screen->flags &= ~TERM_FLAG_7BIT_MODE;
+
+ return 0;
+}
+
+static int screen_SCS(term_screen *screen, const term_seq *seq) {
+ /*
+ * SCS - select-character-set
+ * Designate character sets to G-sets. The mapping from intermediates
+ * and terminal characters in the escape sequence to G-sets and
+ * character-sets is non-trivial and implemented separately. See there
+ * for more information.
+ * This call simply sets the selected G-set to the desired
+ * character-set.
+ */
+
+ term_charset *cs = NULL;
+
+ /* TODO: support more of them? */
+ switch (seq->charset) {
+ case TERM_CHARSET_ISO_LATIN1_SUPPLEMENTAL:
+ case TERM_CHARSET_ISO_LATIN2_SUPPLEMENTAL:
+ case TERM_CHARSET_ISO_LATIN5_SUPPLEMENTAL:
+ case TERM_CHARSET_ISO_GREEK_SUPPLEMENTAL:
+ case TERM_CHARSET_ISO_HEBREW_SUPPLEMENTAL:
+ case TERM_CHARSET_ISO_LATIN_CYRILLIC:
+ break;
+
+ case TERM_CHARSET_DEC_SPECIAL_GRAPHIC:
+ cs = &term_dec_special_graphics;
+ break;
+ case TERM_CHARSET_DEC_SUPPLEMENTAL:
+ cs = &term_dec_supplemental_graphics;
+ break;
+ case TERM_CHARSET_DEC_TECHNICAL:
+ case TERM_CHARSET_CYRILLIC_DEC:
+ case TERM_CHARSET_DUTCH_NRCS:
+ case TERM_CHARSET_FINNISH_NRCS:
+ case TERM_CHARSET_FRENCH_NRCS:
+ case TERM_CHARSET_FRENCH_CANADIAN_NRCS:
+ case TERM_CHARSET_GERMAN_NRCS:
+ case TERM_CHARSET_GREEK_DEC:
+ case TERM_CHARSET_GREEK_NRCS:
+ case TERM_CHARSET_HEBREW_DEC:
+ case TERM_CHARSET_HEBREW_NRCS:
+ case TERM_CHARSET_ITALIAN_NRCS:
+ case TERM_CHARSET_NORWEGIAN_DANISH_NRCS:
+ case TERM_CHARSET_PORTUGUESE_NRCS:
+ case TERM_CHARSET_RUSSIAN_NRCS:
+ case TERM_CHARSET_SCS_NRCS:
+ case TERM_CHARSET_SPANISH_NRCS:
+ case TERM_CHARSET_SWEDISH_NRCS:
+ case TERM_CHARSET_SWISS_NRCS:
+ case TERM_CHARSET_TURKISH_DEC:
+ case TERM_CHARSET_TURKISH_NRCS:
+ break;
+
+ case TERM_CHARSET_USERPREF_SUPPLEMENTAL:
+ break;
+ }
+
+ if (seq->intermediates & TERM_SEQ_FLAG_POPEN)
+ screen->g0 = cs ? : &term_unicode_lower;
+ else if (seq->intermediates & TERM_SEQ_FLAG_PCLOSE)
+ screen->g1 = cs ? : &term_unicode_upper;
+ else if (seq->intermediates & TERM_SEQ_FLAG_MULT)
+ screen->g2 = cs ? : &term_unicode_lower;
+ else if (seq->intermediates & TERM_SEQ_FLAG_PLUS)
+ screen->g3 = cs ? : &term_unicode_upper;
+ else if (seq->intermediates & TERM_SEQ_FLAG_MINUS)
+ screen->g1 = cs ? : &term_unicode_upper;
+ else if (seq->intermediates & TERM_SEQ_FLAG_DOT)
+ screen->g2 = cs ? : &term_unicode_lower;
+ else if (seq->intermediates & TERM_SEQ_FLAG_SLASH)
+ screen->g3 = cs ? : &term_unicode_upper;
+
+ return 0;
+}
+
+static int screen_SD(term_screen *screen, const term_seq *seq) {
+ /*
+ * SD - scroll-down
+ * This control function moves the user window down a specified number
+ * of lines in page memory.
+ * @args[0] is the number of lines to move the
+ * user window up in page memory. New lines appear at the top of the
+ * display. Old lines disappear at the bottom of the display. You
+ * cannot pan past the top margin of the current page. 0 is treated
+ * as 1.
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ term_page_scroll_down(screen->page, num, &screen->attr, screen->age, NULL);
+
+ return 0;
+}
+
+static int screen_SGR(term_screen *screen, const term_seq *seq) {
+ /*
+ * SGR - select-graphics-rendition
+ */
+
+ term_color *dst;
+ unsigned int i, code;
+ int v;
+
+ if (seq->n_args < 1) {
+ zero(screen->attr);
+ return 0;
+ }
+
+ for (i = 0; i < seq->n_args; ++i) {
+ v = seq->args[i];
+ switch (v) {
+ case 1:
+ screen->attr.bold = 1;
+ break;
+ case 3:
+ screen->attr.italic = 1;
+ break;
+ case 4:
+ screen->attr.underline = 1;
+ break;
+ case 5:
+ screen->attr.blink = 1;
+ break;
+ case 7:
+ screen->attr.inverse = 1;
+ break;
+ case 8:
+ screen->attr.hidden = 1;
+ break;
+ case 22:
+ screen->attr.bold = 0;
+ break;
+ case 23:
+ screen->attr.italic = 0;
+ break;
+ case 24:
+ screen->attr.underline = 0;
+ break;
+ case 25:
+ screen->attr.blink = 0;
+ break;
+ case 27:
+ screen->attr.inverse = 0;
+ break;
+ case 28:
+ screen->attr.hidden = 0;
+ break;
+ case 30 ... 37:
+ screen->attr.fg.ccode = v - 30 + TERM_CCODE_BLACK;
+ break;
+ case 39:
+ screen->attr.fg.ccode = 0;
+ break;
+ case 40 ... 47:
+ screen->attr.bg.ccode = v - 40 + TERM_CCODE_BLACK;
+ break;
+ case 49:
+ screen->attr.bg.ccode = 0;
+ break;
+ case 90 ... 97:
+ screen->attr.fg.ccode = v - 90 + TERM_CCODE_LIGHT_BLACK;
+ break;
+ case 100 ... 107:
+ screen->attr.bg.ccode = v - 100 + TERM_CCODE_LIGHT_BLACK;
+ break;
+ case 38:
+ /* fallthrough */
+ case 48:
+
+ if (v == 38)
+ dst = &screen->attr.fg;
+ else
+ dst = &screen->attr.bg;
+
+ ++i;
+ if (i >= seq->n_args)
+ break;
+
+ switch (seq->args[i]) {
+ case 2:
+ /* 24bit-color support */
+
+ i += 3;
+ if (i >= seq->n_args)
+ break;
+
+ dst->ccode = TERM_CCODE_RGB;
+ dst->red = (seq->args[i - 2] >= 0) ? seq->args[i - 2] : 0;
+ dst->green = (seq->args[i - 1] >= 0) ? seq->args[i - 1] : 0;
+ dst->blue = (seq->args[i] >= 0) ? seq->args[i] : 0;
+
+ break;
+ case 5:
+ /* 256-color support */
+
+ ++i;
+ if (i >= seq->n_args || seq->args[i] < 0)
+ break;
+
+ code = seq->args[i];
+ if (code < 16) {
+ dst->ccode = code;
+ } else if (code < 232) {
+ static const uint8_t bval[] = {
+ 0x00, 0x5f, 0x87,
+ 0xaf, 0xd7, 0xff,
+ };
+
+ dst->ccode = TERM_CCODE_256;
+ dst->c256 = code;
+ code -= 16;
+ dst->blue = bval[code % 6];
+ code /= 6;
+ dst->green = bval[code % 6];
+ code /= 6;
+ dst->red = bval[code % 6];
+ } else if (code < 256) {
+ dst->ccode = TERM_CCODE_256;
+ dst->c256 = code;
+ code = (code - 232) * 10 + 8;
+ dst->red = code;
+ dst->green = code;
+ dst->blue = code;
+ }
+
+ break;
+ }
+
+ break;
+ case -1:
+ /* fallthrough */
+ case 0:
+ zero(screen->attr);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static int screen_SI(term_screen *screen, const term_seq *seq) {
+ /*
+ * SI - shift-in
+ * Map G0 into GL.
+ */
+
+ screen->gl = &screen->g0;
+
+ return 0;
+}
+
+static int screen_SM_ANSI(term_screen *screen, const term_seq *seq) {
+ /*
+ * SM_ANSI - set-mode-ansi
+ *
+ * TODO: implement
+ */
+
+ unsigned int i;
+
+ for (i = 0; i < seq->n_args; ++i)
+ screen_mode_change(screen, seq->args[i], false, true);
+
+ return 0;
+}
+
+static int screen_SM_DEC(term_screen *screen, const term_seq *seq) {
+ /*
+ * SM_DEC - set-mode-dec
+ * This is the same as SM_ANSI but for DEC modes.
+ */
+
+ unsigned int i;
+
+ for (i = 0; i < seq->n_args; ++i)
+ screen_mode_change(screen, seq->args[i], true, true);
+
+ return 0;
+}
+
+static int screen_SO(term_screen *screen, const term_seq *seq) {
+ /*
+ * SO - shift-out
+ * Map G1 into GL.
+ */
+
+ screen->gl = &screen->g1;
+
+ return 0;
+}
+
+static int screen_SPA(term_screen *screen, const term_seq *seq) {
+ /*
+ * SPA - start-of-protected-area
+ *
+ * TODO: What is this?
+ */
+
+ return 0;
+}
+
+static int screen_SS2(term_screen *screen, const term_seq *seq) {
+ /*
+ * SS2 - single-shift-2
+ * Temporarily map G2 into GL for the next graphics character.
+ */
+
+ screen->glt = &screen->g2;
+
+ return 0;
+}
+
+static int screen_SS3(term_screen *screen, const term_seq *seq) {
+ /*
+ * SS3 - single-shift-3
+ * Temporarily map G3 into GL for the next graphics character
+ */
+
+ screen->glt = &screen->g3;
+
+ return 0;
+}
+
+static int screen_ST(term_screen *screen, const term_seq *seq) {
+ /*
+ * ST - string-terminator
+ * The string-terminator is usually part of control-sequences and
+ * handled by the parser. In all other situations it is silently
+ * ignored.
+ */
+
+ return 0;
+}
+
+static int screen_SU(term_screen *screen, const term_seq *seq) {
+ /*
+ * SU - scroll-up
+ * This control function moves the user window up a specified number of
+ * lines in page memory.
+ * @args[0] is the number of lines to move the
+ * user window down in page memory. New lines appear at the bottom of
+ * the display. Old lines disappear at the top of the display. You
+ * cannot pan past the bottom margin of the current page. 0 is treated
+ * as 1.
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ term_page_scroll_up(screen->page, num, &screen->attr, screen->age, screen->history);
+
+ return 0;
+}
+
+static int screen_SUB(term_screen *screen, const term_seq *seq) {
+ /*
+ * SUB - substitute
+ * Cancel the current control-sequence and print a replacement
+ * character. Our parser already handles this so all we have to do is
+ * print the replacement character.
+ */
+
+ static const term_seq rep = {
+ .type = TERM_SEQ_GRAPHIC,
+ .command = TERM_CMD_GRAPHIC,
+ .terminator = 0xfffd,
+ };
+
+ return screen_GRAPHIC(screen, &rep);
+}
+
+static int screen_TBC(term_screen *screen, const term_seq *seq) {
+ /*
+ * TBC - tab-clear
+ * This clears tab-stops. If @args[0] is 0, the tab-stop at the current
+ * cursor position is cleared. If it is 3, all tab stops are cleared.
+ *
+ * Defaults:
+ * args[0]: 0
+ */
+
+ unsigned int mode = 0, pos;
+
+ if (seq->args[0] > 0)
+ mode = seq->args[0];
+
+ switch (mode) {
+ case 0:
+ pos = screen->cursor_x;
+ if (screen->page->width > 0)
+ screen->tabs[pos / 8] &= ~(1U << (pos % 8));
+ break;
+ case 3:
+ if (screen->page->width > 0)
+ memset(screen->tabs, 0, (screen->page->width + 7) / 8);
+ break;
+ }
+
+ return 0;
+}
+
+static int screen_VPA(term_screen *screen, const term_seq *seq) {
+ /*
+ * VPA - vertical-line-position-absolute
+ * VPA causes the active position to be moved to the corresponding
+ * horizontal position. @args[0] specifies the line to jump to. If an
+ * attempt is made to move the active position below the last line, then
+ * the active position stops on the last line. 0 is treated as 1.
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int pos = 1;
+
+ if (seq->args[0] > 0)
+ pos = seq->args[0];
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_set_rel(screen, screen->cursor_x, pos - 1);
+
+ return 0;
+}
+
+static int screen_VPR(term_screen *screen, const term_seq *seq) {
+ /*
+ * VPR - vertical-line-position-relative
+ * VPR causes the active position to be moved to the corresponding
+ * horizontal position. @args[0] specifies the number of lines to jump
+ * down relative to the current cursor position. If an attempt is made
+ * to move the active position below the last line, the active position
+ * stops at the last line. 0 is treated as 1.
+ *
+ * Defaults:
+ * args[0]: 1
+ */
+
+ unsigned int num = 1;
+
+ if (seq->args[0] > 0)
+ num = seq->args[0];
+
+ screen_cursor_clear_wrap(screen);
+ screen_cursor_down(screen, num, false);
+
+ return 0;
+}
+
+static int screen_VT(term_screen *screen, const term_seq *seq) {
+ /*
+ * VT - vertical-tab
+ * This causes a vertical jump by one line. Terminals treat it exactly
+ * the same as LF.
+ */
+
+ return screen_LF(screen, seq);
+}
+
+static int screen_XTERM_CLLHP(term_screen *screen, const term_seq *seq) {
+ /*
+ * XTERM_CLLHP - xterm-cursor-lower-left-hp-bugfix
+ * Move the cursor to the lower-left corner of the page. This is an HP
+ * bugfix by xterm.
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_XTERM_IHMT(term_screen *screen, const term_seq *seq) {
+ /*
+ * XTERM_IHMT - xterm-initiate-highlight-mouse-tracking
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_XTERM_MLHP(term_screen *screen, const term_seq *seq) {
+ /*
+ * XTERM_MLHP - xterm-memory-lock-hp-bugfix
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_XTERM_MUHP(term_screen *screen, const term_seq *seq) {
+ /*
+ * XTERM_MUHP - xterm-memory-unlock-hp-bugfix
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_XTERM_RPM(term_screen *screen, const term_seq *seq) {
+ /*
+ * XTERM_RPM - xterm-restore-private-mode
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_XTERM_RRV(term_screen *screen, const term_seq *seq) {
+ /*
+ * XTERM_RRV - xterm-reset-resource-value
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_XTERM_RTM(term_screen *screen, const term_seq *seq) {
+ /*
+ * XTERM_RTM - xterm-reset-title-mode
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_XTERM_SACL1(term_screen *screen, const term_seq *seq) {
+ /*
+ * XTERM_SACL1 - xterm-set-ansi-conformance-level-1
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_XTERM_SACL2(term_screen *screen, const term_seq *seq) {
+ /*
+ * XTERM_SACL2 - xterm-set-ansi-conformance-level-2
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_XTERM_SACL3(term_screen *screen, const term_seq *seq) {
+ /*
+ * XTERM_SACL3 - xterm-set-ansi-conformance-level-3
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_XTERM_SDCS(term_screen *screen, const term_seq *seq) {
+ /*
+ * XTERM_SDCS - xterm-set-default-character-set
+ * Select the default character set. We treat this the same as UTF-8 as
+ * this is our default character set. As we always use UTF-8, this
+ * becomes as no-op.
+ */
+
+ return 0;
+}
+
+static int screen_XTERM_SGFX(term_screen *screen, const term_seq *seq) {
+ /*
+ * XTERM_SGFX - xterm-sixel-graphics
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_XTERM_SPM(term_screen *screen, const term_seq *seq) {
+ /*
+ * XTERM_SPM - xterm-set-private-mode
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_XTERM_SRV(term_screen *screen, const term_seq *seq) {
+ /*
+ * XTERM_SRV - xterm-set-resource-value
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_XTERM_STM(term_screen *screen, const term_seq *seq) {
+ /*
+ * XTERM_STM - xterm-set-title-mode
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+static int screen_XTERM_SUCS(term_screen *screen, const term_seq *seq) {
+ /*
+ * XTERM_SUCS - xterm-select-utf8-character-set
+ * Select UTF-8 as character set. This is our default on only character
+ * set. Hence, this is a no-op.
+ */
+
+ return 0;
+}
+
+static int screen_XTERM_WM(term_screen *screen, const term_seq *seq) {
+ /*
+ * XTERM_WM - xterm-window-management
+ *
+ * Probably not worth implementing.
+ */
+
+ return 0;
+}
+
+/*
+ * Feeding data
+ * The screen_feed_*() handlers take data from the user and feed it into the
+ * screen. Once the parser has detected a sequence, we parse the command-type
+ * and forward it to the command-dispatchers.
+ */
+
+static int screen_feed_cmd(term_screen *screen, const term_seq *seq) {
+ switch (seq->command) {
+ case TERM_CMD_GRAPHIC:
+ return screen_GRAPHIC(screen, seq);
+ case TERM_CMD_BEL:
+ return screen_BEL(screen, seq);
+ case TERM_CMD_BS:
+ return screen_BS(screen, seq);
+ case TERM_CMD_CBT:
+ return screen_CBT(screen, seq);
+ case TERM_CMD_CHA:
+ return screen_CHA(screen, seq);
+ case TERM_CMD_CHT:
+ return screen_CHT(screen, seq);
+ case TERM_CMD_CNL:
+ return screen_CNL(screen, seq);
+ case TERM_CMD_CPL:
+ return screen_CPL(screen, seq);
+ case TERM_CMD_CR:
+ return screen_CR(screen, seq);
+ case TERM_CMD_CUB:
+ return screen_CUB(screen, seq);
+ case TERM_CMD_CUD:
+ return screen_CUD(screen, seq);
+ case TERM_CMD_CUF:
+ return screen_CUF(screen, seq);
+ case TERM_CMD_CUP:
+ return screen_CUP(screen, seq);
+ case TERM_CMD_CUU:
+ return screen_CUU(screen, seq);
+ case TERM_CMD_DA1:
+ return screen_DA1(screen, seq);
+ case TERM_CMD_DA2:
+ return screen_DA2(screen, seq);
+ case TERM_CMD_DA3:
+ return screen_DA3(screen, seq);
+ case TERM_CMD_DC1:
+ return screen_DC1(screen, seq);
+ case TERM_CMD_DC3:
+ return screen_DC3(screen, seq);
+ case TERM_CMD_DCH:
+ return screen_DCH(screen, seq);
+ case TERM_CMD_DECALN:
+ return screen_DECALN(screen, seq);
+ case TERM_CMD_DECANM:
+ return screen_DECANM(screen, seq);
+ case TERM_CMD_DECBI:
+ return screen_DECBI(screen, seq);
+ case TERM_CMD_DECCARA:
+ return screen_DECCARA(screen, seq);
+ case TERM_CMD_DECCRA:
+ return screen_DECCRA(screen, seq);
+ case TERM_CMD_DECDC:
+ return screen_DECDC(screen, seq);
+ case TERM_CMD_DECDHL_BH:
+ return screen_DECDHL_BH(screen, seq);
+ case TERM_CMD_DECDHL_TH:
+ return screen_DECDHL_TH(screen, seq);
+ case TERM_CMD_DECDWL:
+ return screen_DECDWL(screen, seq);
+ case TERM_CMD_DECEFR:
+ return screen_DECEFR(screen, seq);
+ case TERM_CMD_DECELF:
+ return screen_DECELF(screen, seq);
+ case TERM_CMD_DECELR:
+ return screen_DECELR(screen, seq);
+ case TERM_CMD_DECERA:
+ return screen_DECERA(screen, seq);
+ case TERM_CMD_DECFI:
+ return screen_DECFI(screen, seq);
+ case TERM_CMD_DECFRA:
+ return screen_DECFRA(screen, seq);
+ case TERM_CMD_DECIC:
+ return screen_DECIC(screen, seq);
+ case TERM_CMD_DECID:
+ return screen_DECID(screen, seq);
+ case TERM_CMD_DECINVM:
+ return screen_DECINVM(screen, seq);
+ case TERM_CMD_DECKBD:
+ return screen_DECKBD(screen, seq);
+ case TERM_CMD_DECKPAM:
+ return screen_DECKPAM(screen, seq);
+ case TERM_CMD_DECKPNM:
+ return screen_DECKPNM(screen, seq);
+ case TERM_CMD_DECLFKC:
+ return screen_DECLFKC(screen, seq);
+ case TERM_CMD_DECLL:
+ return screen_DECLL(screen, seq);
+ case TERM_CMD_DECLTOD:
+ return screen_DECLTOD(screen, seq);
+ case TERM_CMD_DECPCTERM:
+ return screen_DECPCTERM(screen, seq);
+ case TERM_CMD_DECPKA:
+ return screen_DECPKA(screen, seq);
+ case TERM_CMD_DECPKFMR:
+ return screen_DECPKFMR(screen, seq);
+ case TERM_CMD_DECRARA:
+ return screen_DECRARA(screen, seq);
+ case TERM_CMD_DECRC:
+ return screen_DECRC(screen, seq);
+ case TERM_CMD_DECREQTPARM:
+ return screen_DECREQTPARM(screen, seq);
+ case TERM_CMD_DECRPKT:
+ return screen_DECRPKT(screen, seq);
+ case TERM_CMD_DECRQCRA:
+ return screen_DECRQCRA(screen, seq);
+ case TERM_CMD_DECRQDE:
+ return screen_DECRQDE(screen, seq);
+ case TERM_CMD_DECRQKT:
+ return screen_DECRQKT(screen, seq);
+ case TERM_CMD_DECRQLP:
+ return screen_DECRQLP(screen, seq);
+ case TERM_CMD_DECRQM_ANSI:
+ return screen_DECRQM_ANSI(screen, seq);
+ case TERM_CMD_DECRQM_DEC:
+ return screen_DECRQM_DEC(screen, seq);
+ case TERM_CMD_DECRQPKFM:
+ return screen_DECRQPKFM(screen, seq);
+ case TERM_CMD_DECRQPSR:
+ return screen_DECRQPSR(screen, seq);
+ case TERM_CMD_DECRQTSR:
+ return screen_DECRQTSR(screen, seq);
+ case TERM_CMD_DECRQUPSS:
+ return screen_DECRQUPSS(screen, seq);
+ case TERM_CMD_DECSACE:
+ return screen_DECSACE(screen, seq);
+ case TERM_CMD_DECSASD:
+ return screen_DECSASD(screen, seq);
+ case TERM_CMD_DECSC:
+ return screen_DECSC(screen, seq);
+ case TERM_CMD_DECSCA:
+ return screen_DECSCA(screen, seq);
+ case TERM_CMD_DECSCL:
+ return screen_DECSCL(screen, seq);
+ case TERM_CMD_DECSCP:
+ return screen_DECSCP(screen, seq);
+ case TERM_CMD_DECSCPP:
+ return screen_DECSCPP(screen, seq);
+ case TERM_CMD_DECSCS:
+ return screen_DECSCS(screen, seq);
+ case TERM_CMD_DECSCUSR:
+ return screen_DECSCUSR(screen, seq);
+ case TERM_CMD_DECSDDT:
+ return screen_DECSDDT(screen, seq);
+ case TERM_CMD_DECSDPT:
+ return screen_DECSDPT(screen, seq);
+ case TERM_CMD_DECSED:
+ return screen_DECSED(screen, seq);
+ case TERM_CMD_DECSEL:
+ return screen_DECSEL(screen, seq);
+ case TERM_CMD_DECSERA:
+ return screen_DECSERA(screen, seq);
+ case TERM_CMD_DECSFC:
+ return screen_DECSFC(screen, seq);
+ case TERM_CMD_DECSKCV:
+ return screen_DECSKCV(screen, seq);
+ case TERM_CMD_DECSLCK:
+ return screen_DECSLCK(screen, seq);
+ case TERM_CMD_DECSLE:
+ return screen_DECSLE(screen, seq);
+ case TERM_CMD_DECSLPP:
+ return screen_DECSLPP(screen, seq);
+ case TERM_CMD_DECSLRM_OR_SC:
+ return screen_DECSLRM_OR_SC(screen, seq);
+ case TERM_CMD_DECSMBV:
+ return screen_DECSMBV(screen, seq);
+ case TERM_CMD_DECSMKR:
+ return screen_DECSMKR(screen, seq);
+ case TERM_CMD_DECSNLS:
+ return screen_DECSNLS(screen, seq);
+ case TERM_CMD_DECSPP:
+ return screen_DECSPP(screen, seq);
+ case TERM_CMD_DECSPPCS:
+ return screen_DECSPPCS(screen, seq);
+ case TERM_CMD_DECSPRTT:
+ return screen_DECSPRTT(screen, seq);
+ case TERM_CMD_DECSR:
+ return screen_DECSR(screen, seq);
+ case TERM_CMD_DECSRFR:
+ return screen_DECSRFR(screen, seq);
+ case TERM_CMD_DECSSCLS:
+ return screen_DECSSCLS(screen, seq);
+ case TERM_CMD_DECSSDT:
+ return screen_DECSSDT(screen, seq);
+ case TERM_CMD_DECSSL:
+ return screen_DECSSL(screen, seq);
+ case TERM_CMD_DECST8C:
+ return screen_DECST8C(screen, seq);
+ case TERM_CMD_DECSTBM:
+ return screen_DECSTBM(screen, seq);
+ case TERM_CMD_DECSTR:
+ return screen_DECSTR(screen, seq);
+ case TERM_CMD_DECSTRL:
+ return screen_DECSTRL(screen, seq);
+ case TERM_CMD_DECSWBV:
+ return screen_DECSWBV(screen, seq);
+ case TERM_CMD_DECSWL:
+ return screen_DECSWL(screen, seq);
+ case TERM_CMD_DECTID:
+ return screen_DECTID(screen, seq);
+ case TERM_CMD_DECTME:
+ return screen_DECTME(screen, seq);
+ case TERM_CMD_DECTST:
+ return screen_DECTST(screen, seq);
+ case TERM_CMD_DL:
+ return screen_DL(screen, seq);
+ case TERM_CMD_DSR_ANSI:
+ return screen_DSR_ANSI(screen, seq);
+ case TERM_CMD_DSR_DEC:
+ return screen_DSR_DEC(screen, seq);
+ case TERM_CMD_ECH:
+ return screen_ECH(screen, seq);
+ case TERM_CMD_ED:
+ return screen_ED(screen, seq);
+ case TERM_CMD_EL:
+ return screen_EL(screen, seq);
+ case TERM_CMD_ENQ:
+ return screen_ENQ(screen, seq);
+ case TERM_CMD_EPA:
+ return screen_EPA(screen, seq);
+ case TERM_CMD_FF:
+ return screen_FF(screen, seq);
+ case TERM_CMD_HPA:
+ return screen_HPA(screen, seq);
+ case TERM_CMD_HPR:
+ return screen_HPR(screen, seq);
+ case TERM_CMD_HT:
+ return screen_HT(screen, seq);
+ case TERM_CMD_HTS:
+ return screen_HTS(screen, seq);
+ case TERM_CMD_HVP:
+ return screen_HVP(screen, seq);
+ case TERM_CMD_ICH:
+ return screen_ICH(screen, seq);
+ case TERM_CMD_IL:
+ return screen_IL(screen, seq);
+ case TERM_CMD_IND:
+ return screen_IND(screen, seq);
+ case TERM_CMD_LF:
+ return screen_LF(screen, seq);
+ case TERM_CMD_LS1R:
+ return screen_LS1R(screen, seq);
+ case TERM_CMD_LS2:
+ return screen_LS2(screen, seq);
+ case TERM_CMD_LS2R:
+ return screen_LS2R(screen, seq);
+ case TERM_CMD_LS3:
+ return screen_LS3(screen, seq);
+ case TERM_CMD_LS3R:
+ return screen_LS3R(screen, seq);
+ case TERM_CMD_MC_ANSI:
+ return screen_MC_ANSI(screen, seq);
+ case TERM_CMD_MC_DEC:
+ return screen_MC_DEC(screen, seq);
+ case TERM_CMD_NEL:
+ return screen_NEL(screen, seq);
+ case TERM_CMD_NP:
+ return screen_NP(screen, seq);
+ case TERM_CMD_NULL:
+ return screen_NULL(screen, seq);
+ case TERM_CMD_PP:
+ return screen_PP(screen, seq);
+ case TERM_CMD_PPA:
+ return screen_PPA(screen, seq);
+ case TERM_CMD_PPB:
+ return screen_PPB(screen, seq);
+ case TERM_CMD_PPR:
+ return screen_PPR(screen, seq);
+ case TERM_CMD_RC:
+ return screen_RC(screen, seq);
+ case TERM_CMD_REP:
+ return screen_REP(screen, seq);
+ case TERM_CMD_RI:
+ return screen_RI(screen, seq);
+ case TERM_CMD_RIS:
+ return screen_RIS(screen, seq);
+ case TERM_CMD_RM_ANSI:
+ return screen_RM_ANSI(screen, seq);
+ case TERM_CMD_RM_DEC:
+ return screen_RM_DEC(screen, seq);
+ case TERM_CMD_S7C1T:
+ return screen_S7C1T(screen, seq);
+ case TERM_CMD_S8C1T:
+ return screen_S8C1T(screen, seq);
+ case TERM_CMD_SCS:
+ return screen_SCS(screen, seq);
+ case TERM_CMD_SD:
+ return screen_SD(screen, seq);
+ case TERM_CMD_SGR:
+ return screen_SGR(screen, seq);
+ case TERM_CMD_SI:
+ return screen_SI(screen, seq);
+ case TERM_CMD_SM_ANSI:
+ return screen_SM_ANSI(screen, seq);
+ case TERM_CMD_SM_DEC:
+ return screen_SM_DEC(screen, seq);
+ case TERM_CMD_SO:
+ return screen_SO(screen, seq);
+ case TERM_CMD_SPA:
+ return screen_SPA(screen, seq);
+ case TERM_CMD_SS2:
+ return screen_SS2(screen, seq);
+ case TERM_CMD_SS3:
+ return screen_SS3(screen, seq);
+ case TERM_CMD_ST:
+ return screen_ST(screen, seq);
+ case TERM_CMD_SU:
+ return screen_SU(screen, seq);
+ case TERM_CMD_SUB:
+ return screen_SUB(screen, seq);
+ case TERM_CMD_TBC:
+ return screen_TBC(screen, seq);
+ case TERM_CMD_VPA:
+ return screen_VPA(screen, seq);
+ case TERM_CMD_VPR:
+ return screen_VPR(screen, seq);
+ case TERM_CMD_VT:
+ return screen_VT(screen, seq);
+ case TERM_CMD_XTERM_CLLHP:
+ return screen_XTERM_CLLHP(screen, seq);
+ case TERM_CMD_XTERM_IHMT:
+ return screen_XTERM_IHMT(screen, seq);
+ case TERM_CMD_XTERM_MLHP:
+ return screen_XTERM_MLHP(screen, seq);
+ case TERM_CMD_XTERM_MUHP:
+ return screen_XTERM_MUHP(screen, seq);
+ case TERM_CMD_XTERM_RPM:
+ return screen_XTERM_RPM(screen, seq);
+ case TERM_CMD_XTERM_RRV:
+ return screen_XTERM_RRV(screen, seq);
+ case TERM_CMD_XTERM_RTM:
+ return screen_XTERM_RTM(screen, seq);
+ case TERM_CMD_XTERM_SACL1:
+ return screen_XTERM_SACL1(screen, seq);
+ case TERM_CMD_XTERM_SACL2:
+ return screen_XTERM_SACL2(screen, seq);
+ case TERM_CMD_XTERM_SACL3:
+ return screen_XTERM_SACL3(screen, seq);
+ case TERM_CMD_XTERM_SDCS:
+ return screen_XTERM_SDCS(screen, seq);
+ case TERM_CMD_XTERM_SGFX:
+ return screen_XTERM_SGFX(screen, seq);
+ case TERM_CMD_XTERM_SPM:
+ return screen_XTERM_SPM(screen, seq);
+ case TERM_CMD_XTERM_SRV:
+ return screen_XTERM_SRV(screen, seq);
+ case TERM_CMD_XTERM_STM:
+ return screen_XTERM_STM(screen, seq);
+ case TERM_CMD_XTERM_SUCS:
+ return screen_XTERM_SUCS(screen, seq);
+ case TERM_CMD_XTERM_WM:
+ return screen_XTERM_WM(screen, seq);
+ }
+
+ return 0;
+}
+
+int term_screen_feed_text(term_screen *screen, const uint8_t *in, size_t size) {
+ const uint32_t *ucs4_str;
+ size_t i, j, ucs4_len;
+ const term_seq *seq;
+ int r;
+
+ assert_return(screen, -EINVAL);
+
+ /* Feed bytes into utf8 decoder and handle parsed ucs4 chars. We always
+ * treat data as UTF-8, but the parser makes sure to fall back to raw
+ * 8bit mode if the stream is not valid UTF-8. This should be more than
+ * enough to support old 7bit/8bit modes. */
+ for (i = 0; i < size; ++i) {
+ ucs4_str = term_utf8_decode(&screen->utf8, &ucs4_len, in[i]);
+ for (j = 0; j < ucs4_len; ++j) {
+ r = term_parser_feed(screen->parser, &seq, ucs4_str[j]);
+ if (r < 0) {
+ return r;
+ } else if (r != TERM_SEQ_NONE) {
+ r = screen_feed_cmd(screen, seq);
+ if (r < 0)
+ return r;
+ }
+ }
+ }
+
+ return 0;
+}
+
+int term_screen_feed_keyboard(term_screen *screen, uint32_t keysym, uint32_t ascii, uint32_t ucs4, unsigned int mods) {
+ assert_return(screen, -EINVAL);
+
+ /* TODO */
+
+ return 0;
+}
+
+int term_screen_resize(term_screen *screen, unsigned int x, unsigned int y) {
+ unsigned int i;
+ uint8_t *t;
+ int r;
+
+ assert_return(screen, -EINVAL);
+
+ r = term_page_reserve(screen->page_main, x, y, &screen->attr, screen->age);
+ if (r < 0)
+ return r;
+
+ r = term_page_reserve(screen->page_alt, x, y, &screen->attr, screen->age);
+ if (r < 0)
+ return r;
+
+ if (x > screen->n_tabs) {
+ t = realloc(screen->tabs, (x + 7) / 8);
+ if (!t)
+ return -ENOMEM;
+
+ screen->tabs = t;
+ screen->n_tabs = x;
+ }
+
+ for (i = (screen->page->width + 7) / 8 * 8; i < x; i += 8)
+ screen->tabs[i / 8] = 0x1;
+
+ term_page_resize(screen->page_main, x, y, &screen->attr, screen->age, screen->history);
+ term_page_resize(screen->page_alt, x, y, &screen->attr, screen->age, NULL);
+
+ screen->cursor_x = screen_clamp_x(screen, screen->cursor_x);
+ screen->cursor_y = screen_clamp_x(screen, screen->cursor_y);
+ screen_cursor_clear_wrap(screen);
+
+ return 0;
+}
+
+void term_screen_soft_reset(term_screen *screen) {
+ unsigned int i;
+
+ assert(screen);
+
+ screen->gl = &screen->g0;
+ screen->gr = &screen->g1;
+ screen->glt = NULL;
+ screen->grt = NULL;
+ screen->g0 = &term_unicode_lower;
+ screen->g1 = &term_unicode_upper;
+ screen->g2 = &term_unicode_lower;
+ screen->g3 = &term_unicode_upper;
+
+ screen->page = screen->page_main;
+ screen->history = screen->history_main;
+ screen->flags = TERM_FLAG_7BIT_MODE;
+ screen->conformance_level = TERM_CONFORMANCE_LEVEL_VT400;
+ screen->attr = screen->default_attr;
+
+ screen->saved.cursor_x = 0;
+ screen->saved.cursor_y = 0;
+ screen->saved.attr = screen->attr;
+ screen->saved.gl = screen->gl;
+ screen->saved.gr = screen->gr;
+ screen->saved.glt = NULL;
+ screen->saved.grt = NULL;
+ screen->flags = 0;
+
+ for (i = 0; i < screen->page->width; i += 8)
+ screen->tabs[i / 8] = 0x1;
+
+ term_page_set_scroll_region(screen->page_main, 0, screen->page->height);
+ term_page_set_scroll_region(screen->page_alt, 0, screen->page->height);
+}
+
+void term_screen_hard_reset(term_screen *screen) {
+ assert(screen);
+
+ term_screen_soft_reset(screen);
+ zero(screen->utf8);
+ screen->cursor_x = 0;
+ screen->cursor_y = 0;
+ term_page_erase(screen->page_main, 0, 0, screen->page->width, screen->page->height, &screen->attr, screen->age, false);
+ term_page_erase(screen->page_alt, 0, 0, screen->page->width, screen->page->height, &screen->attr, screen->age, false);
+}
+
+int term_screen_set_answerback(term_screen *screen, const char *answerback) {
+ char *t = NULL;
+
+ assert_return(screen, -EINVAL);
+
+ if (answerback) {
+ t = strdup(answerback);
+ if (!t)
+ return -ENOMEM;
+ }
+
+ free(screen->answerback);
+ screen->answerback = t;
+
+ return 0;
+}