diff options
| -rw-r--r-- | etc/udev/gentoo/05-udev-early.rules | 13 | ||||
| -rw-r--r-- | etc/udev/gentoo/95-net.rules | 15 | ||||
| -rw-r--r-- | etc/udev/gentoo/udev.rules | 115 |
3 files changed, 104 insertions, 39 deletions
diff --git a/etc/udev/gentoo/05-udev-early.rules b/etc/udev/gentoo/05-udev-early.rules new file mode 100644 index 0000000000..b4d24ae216 --- /dev/null +++ b/etc/udev/gentoo/05-udev-early.rules @@ -0,0 +1,13 @@ +# ignore these events until someone needs them +SUBSYSTEM=="drivers", OPTIONS="ignore_device" +SUBSYSTEM=="module", OPTIONS="ignore_device" + +# sysfs is populated after the event is sent +ACTION=="add", DEVPATH=="/devices/*", ENV{PHYSDEVBUS}=="?*", WAIT_FOR_SYSFS="bus" +ACTION=="add", SUBSYSTEM=="scsi", WAIT_FOR_SYSFS="ioerr_cnt" +ACTION=="add", SUBSYSTEM=="net", WAIT_FOR_SYSFS="address" +ACTION=="add", SUBSYSTEM=="net", ENV{PHYSDEVDRIVER}=="?*", WAIT_FOR_SYSFS="device/driver" + +# Set IN_HOTPLUG for compatibility with init-scripts called from udev +ENV{IN_HOTPLUG}="1" + diff --git a/etc/udev/gentoo/95-net.rules b/etc/udev/gentoo/95-net.rules new file mode 100644 index 0000000000..182e8738f6 --- /dev/null +++ b/etc/udev/gentoo/95-net.rules @@ -0,0 +1,15 @@ +# /etc/udev/rules/95-net.rules: device naming rules for udev +# +# Gentoo specific rules +# +# There are a number of modifiers that are allowed to be used in some of the +# fields. See the udev man page for a full description of them. +# +# Try not to modify this file, if you wish to change things, create a new rule +# file that can be run before this one. +# + +# Activate our network if we can +SUBSYSTEM=="net", ACTION=="add", RUN+="net.sh %k start", OPTIONS="last_rule" +SUBSYSTEM=="net", ACTION=="remove", RUN+="net.sh %k stop", OPTIONS="last_rule" + diff --git a/etc/udev/gentoo/udev.rules b/etc/udev/gentoo/udev.rules index bc1c84d4e5..380029fb4c 100644 --- a/etc/udev/gentoo/udev.rules +++ b/etc/udev/gentoo/udev.rules @@ -9,6 +9,10 @@ # file that can be run before this one. # +# Net devices can have arbitrary names, even +# ones set by the user. Not try to match normal +# rules on net devices (Bug #166652) +SUBSYSTEM=="net", GOTO="gentoo_device_rules_end" # console KERNEL=="pty[pqrstuvwxyzabcdef][0123456789abcdef]", NAME="%k", GROUP="tty", OPTIONS="last_rule" @@ -22,25 +26,22 @@ KERNEL=="console", NAME="%k", GROUP="tty", MODE="0600" KERNEL=="ptmx", NAME="%k", GROUP="tty", MODE="0666" # tty devices -KERNEL=="ttyS[0-9]*", NAME="%k", SYMLINK="tts/%n", GROUP="tty" -KERNEL=="ttyUSB[0-9]*", NAME="%k", SYMLINK="tts/USB%n", GROUP="tty", MODE="0660" -KERNEL=="ippp0", NAME="%k", GROUP="tty" -KERNEL=="isdn*" NAME="%k", GROUP="tty" -KERNEL=="dcbri*", NAME="%k", GROUP="tty" -KERNEL=="ircomm*", NAME="%k", GROUP="tty" +KERNEL=="ttyS[0-9]*", NAME="%k", SYMLINK="tts/%n", GROUP="uucp", MODE="0660" +KERNEL=="ttyUSB[0-9]*", NAME="%k", SYMLINK="tts/USB%n", GROUP="uucp", MODE="0660" +KERNEL=="ippp0", NAME="%k", GROUP="uucp", MODE="0660" +KERNEL=="isdn*" NAME="%k", GROUP="uucp", MODE="0660" +KERNEL=="dcbri*", NAME="%k", GROUP="uucp", MODE="0660" +KERNEL=="ircomm*", NAME="%k", GROUP="uucp", MODE="0660" # all block devices SUBSYSTEM=="block", GROUP="disk" # cdrom symlinks and other good cdrom naming -BUS=="ide", KERNEL=="hd[a-z]", ACTION=="add", IMPORT="cdrom_id --export $tempnode" -BUS=="scsi", KERNEL=="sr[0-9]*", ACTION=="add", IMPORT="cdrom_id --export $tempnode" -BUS=="scsi", KERNEL=="scd[a-z]", ACTION=="add", IMPORT="cdrom_id --export $tempnode" -BUS=="scsi", KERNEL=="sg[0-9]*", ACTION=="add", DRIVERS=="sr", GROUP="cdrom" -ENV{ID_CDROM}=="?*", PROGRAM="seq_node.sh %r %k cdrom", SYMLINK+="%c", GROUP="cdrom" -ENV{ID_CDROM_CD_RW}=="?*", PROGRAM="seq_node.sh %r %k cdrw", SYMLINK+="%c" -ENV{ID_CDROM_DVD}=="?*", PROGRAM="seq_node.sh %r %k dvd", SYMLINK+="%c" -ENV{ID_CDROM_DVD_R}=="?*", PROGRAM="seq_node.sh %r %k dvdrw", SYMLINK+="%c" +KERNEL=="sr[0-9]*|hd[a-z]|pcd[0-9]*", ACTION=="add", IMPORT{program}="cdrom_id --export $tempnode" +ENV{ID_CDROM}=="?*", GROUP="cdrom" + +# assign cdrom-permission also to associated generic device (for cd-burning ...) +KERNEL=="sg[0-9]*", ACTION=="add", ATTRS{type}=="4|5", GROUP="cdrom" # disk devices KERNEL=="sd*", NAME="%k", GROUP="disk" @@ -69,26 +70,29 @@ KERNEL=="timer", NAME="snd/%k" KERNEL=="seq", NAME="snd/%k" # capi devices -KERNEL=="capi", NAME="capi20", SYMLINK+="isdn/capi20", GROUP="dialout" -KERNEL=="capi*", NAME="capi/%n", GROUP="dialout" +KERNEL=="capi", NAME="capi20", SYMLINK+="isdn/capi20", GROUP="uucp", MODE="0660" +KERNEL=="capi*", NAME="capi/%n", GROUP="uucp", MODE="0660" # cpu devices KERNEL=="cpu[0-9]*", NAME="cpu/%n/cpuid" KERNEL=="msr[0-9]*", NAME="cpu/%n/msr" KERNEL=="microcode", NAME="cpu/microcode" -# dm devices (ignore them) -KERNEL=="dm-[0-9]*", OPTIONS="ignore_device" -# create a symlink named after the device map name -# note devmap_name comes with extras/multipath -#KERNEL=="dm-[0-9]*", PROGRAM="/sbin/devmap_name %M %m", NAME="%k", SYMLINK+="%c" +# dm devices +# lookup device name and create device in /dev/mapper +# use dmsetup, until devmap_name is provided by sys-fs/device-mapper +ACTION=="add|change", SUBSYSTEM=="block", KERNEL=="dm-*", \ + PROGRAM="/sbin/dmsetup -j %M -m %m --noopencount --noheadings -c -o name info", \ + NAME="mapper/%c" KERNEL=="device-mapper", NAME="mapper/control" # fb devices KERNEL=="fb[0-9]*", NAME="fb/%n", SYMLINK+="%k", GROUP="video" # floppy devices -KERNEL=="fd[0-9]*", NAME="floppy/%n", SYMLINK+="%k", GROUP="floppy" +KERNEL=="fd[0-9]*", NAME="floppy/%k", SYMLINK+="%k", GROUP="floppy" +KERNEL=="fd[0-9]*", ACTION=="add", ATTRS{cmos}=="*", RUN+="create_floppy_devices -c -t $attr{cmos} -m %M -M 0660 -G floppy $root/floppy/%k" +KERNEL=="fd[0-9]*", ACTION=="remove", RUN+="/bin/sh -c 'rm -f $root/floppy/%k?*'" # i2c devices KERNEL=="i2c-[0-9]*", NAME="i2c/%n", SYMLINK+="%k" @@ -144,7 +148,7 @@ KERNEL=="dv1394*", NAME="dv1394/%n", GROUP="video" KERNEL=="video1394*", NAME="video1394/%n", GROUP="video" # raw devices -KERNEL=="raw[0-9]*", NAME="raw/%k", GROUP="disk" +SUBSYSTEM=="raw", KERNEL=="raw[0-9]*", NAME="raw/%k", GROUP="disk" KERNEL=="ram*", NAME="%k", GROUP="disk" # sound devices @@ -244,37 +248,70 @@ KERNEL=="issm*", NAME="infiniband/%k" # usbfs-like device nodes -SUBSYSTEM=="usb_device", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", MODE="0644" +SUBSYSTEM=="usb_device", PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", NAME="%c", GROUP="usb", MODE="0664" + + +# Setting timeout for tape-devices to 900 seconds +# if you need timeouts for other devices add a similar rule +# with correct type-value, or open a bug on bugs.gentoo.org. +ACTION=="add", SUBSYSTEM=="scsi" , ATTRS{type}=="1", \ + RUN+="/bin/sh -c 'echo 900 > /sys$$DEVPATH/timeout'" # Module autoloading +ACTION!="add", GOTO="hotplug_no_add_event" + +# check if the device has already been claimed by a driver +ENV{DRIVER}=="?*", SUBSYSTEM!="input", GOTO="hotplug_load_end" + +# this driver is broken and should not be loaded automatically +SUBSYSTEM=="platform", ENV{MODALIAS}=="i82365", GOTO="hotplug_load_end" # Autoload modules that lack aliases but have them defined inutoload modules -SYSFS{modalias}=="?*", ACTION=="add", RUN+="/sbin/modprobe $env{MODALIAS}" +ENV{MODALIAS}=="?*", RUN+="modprobe.sh $env{MODALIAS}" # /etc/modprobe.conf. -SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN+="/bin/sh -c 'while read id; do /sbin/modprobe pnp:d$$id; done < /sys$devpath/id'" -# If you have problems with some pnp modules being loaded, please enter the -# following aliases into the modprobe configuration files. These are needed by -# udev to autoload some modules -# alias pnp:dPNP0510 irtty-sir -# alias pnp:dPNP0511 irtty-sir -# alias pnp:dPNP0700 floppy -# alias pnp:dPNP0800 pcspkr -# alias pnp:dPNP0b00 rtc -# alias pnp:dPNP0303 atkbd -# alias pnp:dPNP0f13 psmouse -# alias pnp:dPNPb02f analog +SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN+="/bin/sh -c 'while read id; do /lib/udev/modprobe.sh pnp:d$$id; done < /sys$devpath/id'" +# needed aliases are defined in /etc/modprobe.d/pnp-aliases + + +SUBSYSTEM=="i2o", RUN+="modprobe.sh i2o_block" +SUBSYSTEM=="mmc", RUN+="modprobe.sh mmc_block" +# Parts taken from redhat-rules +# sd: 0 TYPE_DISK, 7 TYPE_MOD, 14 TYPE_RBC +# sr: 4 TYPE_WORM, 5 TYPE_ROM +# st/osst: 1 TYPE_TAPE + +# Load driver for scsi-device +SUBSYSTEM!="scsi_device", GOTO="hotplug_scsi_end" +ATTRS{type}=="?*", RUN+="modprobe.sh sg" +ATTRS{type}=="0|7|14", RUN+="modprobe.sh sd_mod" +ATTRS{type}=="4|5", RUN+="modprobe.sh sr_mod" +ATTRS{type}=="8", RUN+="modprobe.sh ch" + +ATTRS{type}=="1", ENV{ID_SCSI_TAPE_DRIVER}="st" +ATTRS{type}=="1", ATTRS{vendor}=="On[sS]tream", \ + ATTRS{model}!="ADR*", ENV{ID_SCSI_TAPE_DRIVER}="osst" +ENV{ID_SCSI_TAPE_DRIVER}=="?*", RUN+="modprobe.sh $env{ID_SCSI_TAPE_DRIVER}" +LABEL="hotplug_scsi_end" + + +SUBSYSTEM=="ide", ATTR{media}=="tape", RUN+="modprobe.sh ide-scsi" + +LABEL="hotplug_load_end" # Load firmware -SUBSYSTEM=="firmware", ACTION=="add", RUN+="firmware.sh" +SUBSYSTEM=="firmware", RUN+="firmware.sh" + +LABEL="hotplug_no_add_event" +LABEL="gentoo_device_rules_end" # be backward compatible for a while with the /etc/dev.d and /etc/hotplug.d/ systems # run /etc/hotplug.d/ stuff only if we came from a hotplug event, not for udevstart -ENV{UDEVD_EVENT}=="1", RUN+="udev_run_hotplugd $env{SUBSYSTEM}" +#ENV{UDEVD_EVENT}=="1", RUN+="udev_run_hotplugd $env{SUBSYSTEM}" # always run /etc/dev.d/ stuff for now. RUN+="udev_run_devd $env{SUBSYSTEM}" |