1 files changed, 0 insertions, 49 deletions
diff --git a/extras/chassis_id/install.txt b/extras/chassis_id/install.txt
deleted file mode 100644
index a567afedcf..0000000000
--- a/extras/chassis_id/install.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-
-Udev does not come pre-installed on a Linux system. Hence, we need to do the following before
-a Linux system is ready ::
-
-Steps:
-~~~~~
-1.  Install libsysfs shared libraries by installing sysfsutils-0.4.0.
-
-2.  Download latest version of udev from www.kernel.org site. It is
-    under repository->utils->kernel path chain.
-
-    Do make and make install so as to install udev. To install scsi_id,
-    go into extras/scsi_id folder to compile scsi_id. Typically, this
-    would be in /sbin folder.  Now, change scsi_id.cfg and set the
-    global option to work with all devices ( -g) and comment out the
-    black list option ( -b ).
-
-3.  Download chassis_id callout code and compile. Install chassis_id and
-    provision.tbl file in /usr/local/bin.
-
-4.  In /etc/rc.sysinit, add mount command to mount the sys memory file
-    system. ( mount -t sysfs sys /sys ). The /sys is necessary as
-    lot of the software components expect it to be in /sys.
-
-5.  Now, in /etc/udev/udev.rules, install the udev rules file. This
-    is the GDN config file which is used by udev to create folders
-    in the form chasis<N>/slot<M>/port<O>/disk<P>.
-
-6.  Now, you are almost there. Refer to PROVISIONING file.
-
-
-PROVISIONING:
-1.  For GDN, the provisioning file is in the format :
-   <id>  <host>   <number_of_disks>     <chassis#>    <slot#>  <serial#>  <name>
-
-   <host>            SCSI host on which the device is connected
-   <Number of disks> how many disks on this blade ?
-   <chassis#>        chassis Number
-   <slot#>           Physical slot number
-   <serial#>         Serial Number for the disk
-   <name>            Name of the disk device.
-
-2.  To fill the provisioning table, the user needs to collect this information and
-    fill provision.tbl.
-
-    The serial number is found from the command scsi_id -p 0x80 -s <device name>.
-
-    The host number is availble from the sys file system. The chassis & slot
-    are visual data and should be enetered into provision.tbl.