diff options
Diffstat (limited to 'extras/multipath-tools/multipath/sg_err.h')
| -rw-r--r-- | extras/multipath-tools/multipath/sg_err.h | 162 |
1 files changed, 162 insertions, 0 deletions
diff --git a/extras/multipath-tools/multipath/sg_err.h b/extras/multipath-tools/multipath/sg_err.h new file mode 100644 index 0000000000..ef57b5ce38 --- /dev/null +++ b/extras/multipath-tools/multipath/sg_err.h @@ -0,0 +1,162 @@ +#ifndef SG_ERR_H +#define SG_ERR_H + +/* Feel free to copy and modify this GPL-ed code into your applications. */ + +/* Version 0.90 (20030519) +*/ + + +/* Some of the following error/status codes are exchanged between the + various layers of the SCSI sub-system in Linux and should never + reach the user. They are placed here for completeness. What appears + here is copied from drivers/scsi/scsi.h which is not visible in + the user space. */ + +#ifndef SCSI_CHECK_CONDITION +/* Following are the "true" SCSI status codes. Linux has traditionally + used a 1 bit right and masked version of these. So now CHECK_CONDITION + and friends (in <scsi/scsi.h>) are deprecated. */ +#define SCSI_CHECK_CONDITION 0x2 +#define SCSI_CONDITION_MET 0x4 +#define SCSI_BUSY 0x8 +#define SCSI_IMMEDIATE 0x10 +#define SCSI_IMMEDIATE_CONDITION_MET 0x14 +#define SCSI_RESERVATION_CONFLICT 0x18 +#define SCSI_COMMAND_TERMINATED 0x22 +#define SCSI_TASK_SET_FULL 0x28 +#define SCSI_ACA_ACTIVE 0x30 +#define SCSI_TASK_ABORTED 0x40 +#endif + +/* The following are 'host_status' codes */ +#ifndef DID_OK +#define DID_OK 0x00 +#endif +#ifndef DID_NO_CONNECT +#define DID_NO_CONNECT 0x01 /* Unable to connect before timeout */ +#define DID_BUS_BUSY 0x02 /* Bus remain busy until timeout */ +#define DID_TIME_OUT 0x03 /* Timed out for some other reason */ +#define DID_BAD_TARGET 0x04 /* Bad target (id?) */ +#define DID_ABORT 0x05 /* Told to abort for some other reason */ +#define DID_PARITY 0x06 /* Parity error (on SCSI bus) */ +#define DID_ERROR 0x07 /* Internal error */ +#define DID_RESET 0x08 /* Reset by somebody */ +#define DID_BAD_INTR 0x09 /* Received an unexpected interrupt */ +#define DID_PASSTHROUGH 0x0a /* Force command past mid-level */ +#define DID_SOFT_ERROR 0x0b /* The low-level driver wants a retry */ +#endif + +/* These defines are to isolate applictaions from kernel define changes */ +#define SG_ERR_DID_OK DID_OK +#define SG_ERR_DID_NO_CONNECT DID_NO_CONNECT +#define SG_ERR_DID_BUS_BUSY DID_BUS_BUSY +#define SG_ERR_DID_TIME_OUT DID_TIME_OUT +#define SG_ERR_DID_BAD_TARGET DID_BAD_TARGET +#define SG_ERR_DID_ABORT DID_ABORT +#define SG_ERR_DID_PARITY DID_PARITY +#define SG_ERR_DID_ERROR DID_ERROR +#define SG_ERR_DID_RESET DID_RESET +#define SG_ERR_DID_BAD_INTR DID_BAD_INTR +#define SG_ERR_DID_PASSTHROUGH DID_PASSTHROUGH +#define SG_ERR_DID_SOFT_ERROR DID_SOFT_ERROR + +/* The following are 'driver_status' codes */ +#ifndef DRIVER_OK +#define DRIVER_OK 0x00 +#endif +#ifndef DRIVER_BUSY +#define DRIVER_BUSY 0x01 +#define DRIVER_SOFT 0x02 +#define DRIVER_MEDIA 0x03 +#define DRIVER_ERROR 0x04 +#define DRIVER_INVALID 0x05 +#define DRIVER_TIMEOUT 0x06 +#define DRIVER_HARD 0x07 +#define DRIVER_SENSE 0x08 /* Sense_buffer has been set */ + +/* Following "suggests" are "or-ed" with one of previous 8 entries */ +#define SUGGEST_RETRY 0x10 +#define SUGGEST_ABORT 0x20 +#define SUGGEST_REMAP 0x30 +#define SUGGEST_DIE 0x40 +#define SUGGEST_SENSE 0x80 +#define SUGGEST_IS_OK 0xff +#endif +#ifndef DRIVER_MASK +#define DRIVER_MASK 0x0f +#endif +#ifndef SUGGEST_MASK +#define SUGGEST_MASK 0xf0 +#endif + +/* These defines are to isolate applictaions from kernel define changes */ +#define SG_ERR_DRIVER_OK DRIVER_OK +#define SG_ERR_DRIVER_BUSY DRIVER_BUSY +#define SG_ERR_DRIVER_SOFT DRIVER_SOFT +#define SG_ERR_DRIVER_MEDIA DRIVER_MEDIA +#define SG_ERR_DRIVER_ERROR DRIVER_ERROR +#define SG_ERR_DRIVER_INVALID DRIVER_INVALID +#define SG_ERR_DRIVER_TIMEOUT DRIVER_TIMEOUT +#define SG_ERR_DRIVER_HARD DRIVER_HARD +#define SG_ERR_DRIVER_SENSE DRIVER_SENSE +#define SG_ERR_SUGGEST_RETRY SUGGEST_RETRY +#define SG_ERR_SUGGEST_ABORT SUGGEST_ABORT +#define SG_ERR_SUGGEST_REMAP SUGGEST_REMAP +#define SG_ERR_SUGGEST_DIE SUGGEST_DIE +#define SG_ERR_SUGGEST_SENSE SUGGEST_SENSE +#define SG_ERR_SUGGEST_IS_OK SUGGEST_IS_OK +#define SG_ERR_DRIVER_MASK DRIVER_MASK +#define SG_ERR_SUGGEST_MASK SUGGEST_MASK + + + +/* The following "print" functions send ACSII to stdout */ +extern void sg_print_command(const unsigned char * command); +extern void sg_print_sense(const char * leadin, + const unsigned char * sense_buffer, int sb_len); +extern void sg_print_status(int masked_status); +extern void sg_print_scsi_status(int scsi_status); +extern void sg_print_host_status(int host_status); +extern void sg_print_driver_status(int driver_status); + +/* sg_chk_n_print() returns 1 quietly if there are no errors/warnings + else it prints to standard output and returns 0. */ +extern int sg_chk_n_print(const char * leadin, int masked_status, + int host_status, int driver_status, + const unsigned char * sense_buffer, int sb_len); + +/* The following function declaration is for the sg version 3 driver. + Only version 3 sg_err.c defines it. */ +struct sg_io_hdr; +extern int sg_chk_n_print3(const char * leadin, struct sg_io_hdr * hp); + + +/* The following "category" function returns one of the following */ +#define SG_ERR_CAT_CLEAN 0 /* No errors or other information */ +#define SG_ERR_CAT_MEDIA_CHANGED 1 /* interpreted from sense buffer */ +#define SG_ERR_CAT_RESET 2 /* interpreted from sense buffer */ +#define SG_ERR_CAT_TIMEOUT 3 +#define SG_ERR_CAT_RECOVERED 4 /* Successful command after recovered err */ +#define SG_ERR_CAT_SENSE 98 /* Something else is in the sense buffer */ +#define SG_ERR_CAT_OTHER 99 /* Some other error/warning has occurred */ + +extern int sg_err_category(int masked_status, int host_status, + int driver_status, const unsigned char * sense_buffer, + int sb_len); + +extern int sg_err_category_new(int scsi_status, int host_status, + int driver_status, const unsigned char * sense_buffer, + int sb_len); + +/* The following function declaration is for the sg version 3 driver. + Only version 3 sg_err.c defines it. */ +extern int sg_err_category3(struct sg_io_hdr * hp); + +/* Returns length of SCSI command given the opcode (first byte) */ +extern int sg_get_command_size(unsigned char opcode); + +extern void sg_get_command_name(unsigned char opcode, int buff_len, + char * buff); + +#endif |