diff options
Diffstat (limited to 'extras/scsi_id')
| -rw-r--r-- | extras/scsi_id/ChangeLog | 43 | ||||
| -rw-r--r-- | extras/scsi_id/Makefile | 2 | ||||
| -rw-r--r-- | extras/scsi_id/TODO | 15 | ||||
| -rw-r--r-- | extras/scsi_id/gen_scsi_id_udev_rules.sh | 85 | ||||
| -rw-r--r-- | extras/scsi_id/release-notes | 50 | ||||
| -rw-r--r-- | extras/scsi_id/scsi_id.8 | 47 | ||||
| -rw-r--r-- | extras/scsi_id/scsi_id.c | 134 | ||||
| -rw-r--r-- | extras/scsi_id/scsi_id.h | 6 | ||||
| -rw-r--r-- | extras/scsi_id/scsi_serial.c | 64 |
9 files changed, 279 insertions, 167 deletions
diff --git a/extras/scsi_id/ChangeLog b/extras/scsi_id/ChangeLog index 7032dfd07f..095d84f2d0 100644 --- a/extras/scsi_id/ChangeLog +++ b/extras/scsi_id/ChangeLog @@ -1,3 +1,46 @@ +2004-feb-25: + * scsi_id.8: Add verbage about usage with udev, and running via + hotplug. + +2004-feb-25: + * scsi_id.c, scsi_id.8: Disable support for -e (all output to + stderr) as it cannot be used in any useful way, and the -c + (device specific callout) as the code is incomplete and has no + users. + +2004-feb-25: + * scsi_id.c: Don't print errno for NULL return from + sysfs_get_classdev_device. + +2004-feb-23: + * scsi_id.c: Get rid of dead/leftover code that checked + if we are on a scsi bus. + +2004-feb-23: + * scsi_serial.c, scsi_id.c: Use ":" consistently in output messages. + +2004-feb-23: + * scsi_serial.c: Add missing new lines for some error messages. + +2004-feb-23: + * scsi_serial.c: open O_NONBLOCK so we handle tape drives without + tapes loaded. + +2004-feb-20: + * scsi_id.h, scsi_id.c: Remove hacks based on KLIBC define to get + around problems when building with udev (udev libsysfs files + were rearranged). + +2004-feb-19: + * scsi_id.h, scsi_id.c, scsi_serial.c: As done in udev code, support + partitions via looking for a parent of the target path. Uses + libsysfs functions to do most of the work, and includes changing + a lot of variables to be struct sysfs_device instead of + sysfs_class_device. + +2004-feb-19: + * Makefile: Version 0.4 + 2004-jan-15: * Makefile: Version 0.3 diff --git a/extras/scsi_id/Makefile b/extras/scsi_id/Makefile index abf48895ad..bfc2923b34 100644 --- a/extras/scsi_id/Makefile +++ b/extras/scsi_id/Makefile @@ -14,7 +14,7 @@ # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -SCSI_ID_VERSION=0.3 +SCSI_ID_VERSION=0.4 prefix = etcdir = ${prefix}/etc diff --git a/extras/scsi_id/TODO b/extras/scsi_id/TODO index dde5c84a67..4f302ea0a4 100644 --- a/extras/scsi_id/TODO +++ b/extras/scsi_id/TODO @@ -1,11 +1,8 @@ -- add information about the config file to the man page +- Document that config file options override command line options, or fix + the code. This means a '-b' in the config file disables any -g on the + command line. -- change so non-KLIBC builds under udev don't use /usr/include/sysfs, - but instead use the sysfs included with udev (needs udev change and/or - sysfsutils changes). +- Add code to check that SCSI commands get back enough data for their + intended usage, mainly callers of scsi_inquiry(). -- do something with callout code - remove or change to a tag? - - This needs an implementation of a device specific callout or device - specific code (called via some special "tag" or such) before it can be - completed. Someone with such hardware to send in a patch. +- Document the config file in the man page diff --git a/extras/scsi_id/gen_scsi_id_udev_rules.sh b/extras/scsi_id/gen_scsi_id_udev_rules.sh new file mode 100644 index 0000000000..07e21ebd50 --- /dev/null +++ b/extras/scsi_id/gen_scsi_id_udev_rules.sh @@ -0,0 +1,85 @@ +#! /bin/sh + +# This script generates and sends to stdout a set of udev.rules for use +# with all scsi block devices on your system. It creates a udev key NAME +# with prefix defaulting to "disk-", and appends the current kernel name +# and the udev kernel number (the partition number, empty for the entire +# disk). +# +# Managing these is probably better done via a gui interface. +# +# You can edit and append the output to your /etc/udev/udev.rules file. +# You probably want to to change names to be non-kernel defaults, so as to +# avoid confusion if a configuration change modifies /sys/block/sd* +# naming. +# +# /etc/scsi_id.config must be properly configured. If you are using this +# script, you probably want a single line enabling scsi_id for all +# devices as follows: +# +# options=-g +# +# The above assumes you will not attach block devices that do not +# properly support the page codes used by scsi_id, this is especially true +# of many USB mass storage devices (mainly flash card readers). +# + +prefix=disk- +scsi_id=/sbin/scsi_id + +dump_ids() +{ + cd ${sysfs_dir}/block + for b in sd* + do + echo -n "$b " + $scsi_id -s /block/$b + if [ $? != 0 ] + then + echo $0 failed for device $b >&2 + exit 1 + fi + done +} + +sysfs_dir=$(mount | awk '$5 == "sysfs" {print $3}') + +c=$(ls /${sysfs_dir}/block/sd* 2>/dev/null | wc -l) +if [ $c = 0 ] +then + echo $0 no block devices present >&2 + exit 1 +fi + +echo "#" +echo "# Start of autogenerated scsi_id rules. Edit the NAME portions of these" +echo "# rules to your liking." +echo "#" +first_line=yes +dump_ids | while read in +do + set $in + name=$1 + shift + id="$*" + if [ $first_line = "yes" ] + then + first_line=no + echo "BUS=\"scsi\", PROGRAM=\"${scsi_id}\", RESULT=\"${id}\", NAME=\"${prefix}${name}%n\"" + echo + echo "# Further RESULT keys use the result of the last PROGRAM rule." + echo "# Be careful not to add any rules containing PROGRAM key between here" + echo "# and the end of this section" + echo + else + # No PROGRAM, so just use the last result of PROGRAM. The + # following is the same as the above without the PROGRAM + # key. + echo "BUS=\"scsi\", RESULT=\"${id}\", NAME=\"${prefix}${name}%n\"" + fi + +done + +echo "#" +echo "# End of autogenerated scsi_id rules" +echo "#" diff --git a/extras/scsi_id/release-notes b/extras/scsi_id/release-notes index 7ef12a25db..a10b569c2d 100644 --- a/extras/scsi_id/release-notes +++ b/extras/scsi_id/release-notes @@ -1,39 +1,49 @@ -Version 0.3 of scsi_id is available at: +Version 0.4 of scsi_id is available at: -http://www-124.ibm.com/storageio/scsi_id/scsi_id-0.3.tar.gz +http://www-124.ibm.com/storageio/scsi_id/scsi_id-0.4.tar.gz -scsi_id is a program to generate a SCSI unique identifier for a given SCSI +scsi_id is a program to generate a unique identifier for a given SCSI device. -It is primarily for use with udev callout config entries. It can also be -used for automatic multi-path configuration or device mapper configuration. +It is primarily for use with the udev callout key. It could also be used +for automatic multi-path configuration or device mapper configuration. -Version 0.3 requires: +Version 0.4 requires: - Linux kernel 2.6 - libsysfs 0.4.0 Major changes since the last release: - - Changes to work with libsysfs 0.4.0 + - Support block device partitions -All changes: + - Added a script to auto-generate udev rules. The script is not + installed but is part of the tarball. - - fix "prefix" usage for path to scsi_id.config +Detailed changes: - - install the sample scsi_id.config file. + - Add man page verbage about usage with udev, and running via + hotplug - - Use DESTDIR in all install/uninstall rules, per problem reported - by Svetoslav Slavtchev. + - Disable support for -e (all output to stderr) as it cannot be + used in any useful way, and the -c (device specific callout) as + the code is incomplete and has no users. - - Fix to work with current sysfs 0.4, based on patch from Dan - Stekloff, but uses sysfs_read_attribute_value instead of - sysfs_get_value_from_attributes. + - Don't print errno for NULL return from sysfs_get_classdev_device. - - SYSFS_BUS_DIR was replaced with SYSFS_BUS_NAME. + - Get rid of dead/leftover code that checked if we are on a scsi + bus. - - Must now use sysfs_open_class_device_path instead of the - previous sysfs_open_class_device. + - ":" consistently in output messages. - - patch from Olaf Hering <olh@suse.de> remove DEBUG and - add --fno-builtin + - Add missing new lines for some error messages. + + - open O_NONBLOCK so we handle tape drives without tapes loaded. + + - Remove hacks based on KLIBC define to get around problems when + building with udev (udev libsysfs files were rearranged). + + - As done in udev code, support partitions via looking for a + parent of the target path. Uses libsysfs functions to do most of + the work, and includes changing a lot of variables to be struct + sysfs_device instead of sysfs_class_device. diff --git a/extras/scsi_id/scsi_id.8 b/extras/scsi_id/scsi_id.8 index a4fb881a05..db3effbc45 100644 --- a/extras/scsi_id/scsi_id.8 +++ b/extras/scsi_id/scsi_id.8 @@ -50,9 +50,13 @@ identifier starts with the NAA value of 6): .fi .P - .SH OPTIONS .TP +.BI subsystem +When called with only a single argument without a leading \-, runs in a hotplug +mode, and expects the environment variable DEVPATH to specify the +corresponding sysfs device. See section below on usage with \fBudev\fP. +.TP .BI \-b The default behaviour - treat the device as black listed, and do nothing unless a white listed device is found in the scsi_id config-file. @@ -63,11 +67,6 @@ of determining and creating a device node based on a sysfs dev entry as done for the \fB-s\fP, send SG_IO commands to \fBdevice\fP, such as \fB/dev/sdc\fP. .TP -.BI \-e -Send all output to standard error even if -.B scsi_id -is running in hotplug mode. -.TP .BI \-f "\| config-file" Read configuration and black/white list entries from .B config-file @@ -90,7 +89,7 @@ Use SCSI INQUIRY VPD page code 0x80 or 0x83. The default behaviour is to query the available VPD pages, and use page 0x83 if found, else page 0x80 if found, else nothing. .TP -.BI \-s "\|sysfs-device" +.BI \-s "\| sysfs-device" Generate an id for the .B sysfs-device. The sysfs mount point must not be included. For example, use /block/sd, @@ -102,6 +101,37 @@ Generate verbose debugging output. .BI \-V Display version number and exit. .RE + +.SH USAGE WITH UDEV +If \fBscsi_id\fP is invoked with one argument without a leading \-, it +assumes it is called for a hotplug event, and looks for the sysfs device +in the DEVPATH environment variable. + +This mode is used when run via the \fBudev\fP PROGRAM key. Passing any +arguments or options as part of the PROGRAM rule breaks this assumption, +and the results will likely not be as expected. + +When in this mode, all errors and warnings are sent via syslog. + +To determine the specific value needed in a RESULT key, use the -s option, +for example: + +.sp +.nf +/sbin/scsi_id -s /block/sda +.fi +.P + +An example \fBudev\fP rule using \fBscsi_id\fP, that will name a block +device and any partitions for the device matching the \fBscsi_id\fP output +of 312345: + +.sp +.nf +BUS="scsi", PROGRAM="/sbin/scsi_id", RESULT="312345", NAME="disk%n" +.fi +.P + .SH "FILES" .nf .ft B @@ -110,8 +140,7 @@ Display version number and exit. .fi .LP .SH "SEE ALSO" -.BR udev (8) -, especially the CALLOUT method. +.BR udev (8), hotplug (8) .SH AUTHORS Developed by Patrick Mansfield <patmans@us.ibm.com> based on SCSI ID source included in earlier linux 2.5 kernels, sg_utils source, and SCSI diff --git a/extras/scsi_id/scsi_id.c b/extras/scsi_id/scsi_id.c index 2754381976..1cd6981e5e 100644 --- a/extras/scsi_id/scsi_id.c +++ b/extras/scsi_id/scsi_id.c @@ -33,7 +33,6 @@ #include <ctype.h> #include <sys/stat.h> #include <sysfs/libsysfs.h> - #include "scsi_id_version.h" #include "scsi_id.h" @@ -48,11 +47,16 @@ #define TMP_DIR "/tmp" #define TMP_PREFIX "scsi" -static const char short_options[] = "bc:d:ef:gip:s:vV"; +/* + * XXX Note the 'e' (send output to stderr in all cases), and 'c' (callout) + * options are not supported, but other code is still left in place for + * now. + */ +static const char short_options[] = "bd:f:gip:s:vV"; /* * Just duplicate per dev options. */ -static const char dev_short_options[] = "bc:gp:"; +static const char dev_short_options[] = "bgp:"; char sysfs_mnt_path[SYSFS_PATH_MAX]; @@ -107,55 +111,6 @@ int sysfs_get_attr(const char *devpath, const char *attr, char *value, return sysfs_read_attribute_value(attr_path, value, SYSFS_NAME_LEN); } -static int sysfs_get_actual_dev(const char *sysfs_path, char *dev, int len) -{ - dprintf("%s\n", sysfs_path); - strncpy(dev, sysfs_path, len); - strncat(dev, "/device", len); - if (sysfs_get_link(dev, dev, len)) { - if (!hotplug_mode) - log_message(LOG_WARNING, "%s: %s\n", dev, - strerror(errno)); - return -1; - } - return 0; -} - -/* - * sysfs_is_bus: Given the sysfs_path to a device, return 1 if sysfs_path - * is on bus, 0 if not on bus, and < 0 on error - */ -static int sysfs_is_bus(const char *sysfs_path, const char *bus) -{ - char bus_dev_name[SYSFS_PATH_MAX]; - char bus_id[SYSFS_NAME_LEN]; - struct stat stat_buf; - ino_t dev_inode; - - dprintf("%s\n", sysfs_path); - - if (sysfs_get_name_from_path(sysfs_path, bus_id, SYSFS_NAME_LEN)) - return -1; - - snprintf(bus_dev_name, MAX_NAME_LEN, "%s/%s/%s/%s/%s", sysfs_mnt_path, - SYSFS_BUS_NAME, bus, SYSFS_DEVICES_NAME, bus_id); - - if (stat(sysfs_path, &stat_buf)) - return -1; - dev_inode = stat_buf.st_ino; - - if (stat(bus_dev_name, &stat_buf)) { - if (errno == ENOENT) - return 0; - else - return -1; - } - if (dev_inode == stat_buf.st_ino) - return 1; - else - return 0; -} - static int get_major_minor(const char *devpath, int *major, int *minor) { char dev_value[MAX_ATTR_LEN]; @@ -168,7 +123,7 @@ static int get_major_minor(const char *devpath, int *major, int *minor) * And if sysfsutils changes, check for ENOENT and handle * it separately. */ - log_message(LOG_DEBUG, "%s could not get dev attribute: %s\n", + log_message(LOG_DEBUG, "%s: could not get dev attribute: %s\n", devpath, strerror(errno)); return -1; } @@ -534,7 +489,7 @@ static int set_options(int argc, char **argv, const char *short_opts, return 0; } -static int per_dev_options(struct sysfs_class_device *scsi_dev, int *good_bad, +static int per_dev_options(struct sysfs_device *scsi_dev, int *good_bad, int *page_code, char *callout) { int retval; @@ -628,9 +583,10 @@ static int scsi_id(const char *target_path, char *maj_min_dev) { int retval; int dev_type = 0; - char full_dev_path[MAX_NAME_LEN]; char serial[MAX_SERIAL_LEN]; - struct sysfs_class_device *scsi_dev; /* of scsi_device full_dev_path */ + struct sysfs_class_device *class_dev; /* of target_path */ + struct sysfs_class_device *class_dev_parent; /* for partitions */ + struct sysfs_device *scsi_dev; /* the scsi_device */ int good_dev; int page_code; char callout[MAX_NAME_LEN]; @@ -661,20 +617,48 @@ static int scsi_id(const char *target_path, char *maj_min_dev) } } - if (sysfs_get_actual_dev(target_path, full_dev_path, MAX_NAME_LEN)) + class_dev = sysfs_open_class_device_path(target_path); + if (!class_dev) { + log_message(LOG_WARNING, "open class %s failed: %s\n", + target_path, strerror(errno)); + return 1; + } + class_dev_parent = sysfs_get_classdev_parent(class_dev); + dprintf("class_dev 0x%p; class_dev_parent 0x%p\n", class_dev, + class_dev_parent); + if (class_dev_parent) { + scsi_dev = sysfs_get_classdev_device(class_dev_parent); + } else { + scsi_dev = sysfs_get_classdev_device(class_dev); + } + + /* + * The close of scsi_dev will close class_dev or class_dev_parent. + */ + + /* + * We assume we are called after the device is completely ready, + * so we don't have to loop here like udev. (And we are usually + * called via udev.) + */ + if (!scsi_dev) { + /* + * errno is not set if we can't find the device link, so + * don't print it out here. + */ + log_message(LOG_WARNING, "Cannot find sysfs device associated with %s\n", + target_path); return 1; + } - dprintf("full_dev_path %s\n", full_dev_path); /* - * Allow only scsi devices (those that have a matching device - * under /bus/scsi/devices). + * Allow only scsi devices. * * Other block devices can support SG IO, but only ide-cd does, so * for now, don't bother with anything else. */ - retval = sysfs_is_bus(full_dev_path, "scsi"); - if (retval == 0) { + if (strcmp(scsi_dev->bus, "scsi") != 0) { if (hotplug_mode) /* * Expected in some cases. @@ -684,14 +668,12 @@ static int scsi_id(const char *target_path, char *maj_min_dev) log_message(LOG_WARNING, "%s is not a scsi device\n", target_path); return 1; - } else if (retval < 0) { - log_message(LOG_WARNING, "sysfs_is_bus failed: %s\n", - strerror(errno)); - return 1; } /* * mknod a temp dev to communicate with the device. + * + * XXX pass down class_dev or class_dev_parent. */ if (!dev_specified && create_tmp_dev(target_path, maj_min_dev, dev_type)) { @@ -699,13 +681,6 @@ static int scsi_id(const char *target_path, char *maj_min_dev) return 1; } - scsi_dev = sysfs_open_class_device_path(full_dev_path); - if (!scsi_dev) { - log_message(LOG_WARNING, "open class %s failed: %s\n", - full_dev_path, strerror(errno)); - return 1; - } - /* * Get any per device (vendor + model) options from the config * file. @@ -718,14 +693,7 @@ static int scsi_id(const char *target_path, char *maj_min_dev) retval = 1; } else if (callout[0] != '\0') { /* - * exec vendor callout, pass it only the "name" to be used - * for error messages, and the dev to open. - * - * This won't work if we need to pass on the original - * command line (when not hotplug mode) since the option - * parsing and per dev parsing modify the argv's. - * - * XXX Not implemented yet. And not fully tested ;-) + * XXX Disabled for now ('c' is not in any options[]). */ retval = 1; } else if (scsi_get_serial(scsi_dev, maj_min_dev, page_code, @@ -736,14 +704,14 @@ static int scsi_id(const char *target_path, char *maj_min_dev) } if (!retval) { if (display_bus_id) - printf("%s ", scsi_dev->name); + printf("%s: ", scsi_dev->name); printf("%s", serial); if (!hotplug_mode) printf("\n"); dprintf("%s\n", serial); retval = 0; } - sysfs_close_class_device(scsi_dev); + sysfs_close_device(scsi_dev); if (!dev_specified) unlink(maj_min_dev); diff --git a/extras/scsi_id/scsi_id.h b/extras/scsi_id/scsi_id.h index 573a2b60d7..9edb39ec49 100644 --- a/extras/scsi_id/scsi_id.h +++ b/extras/scsi_id/scsi_id.h @@ -47,9 +47,9 @@ extern int sysfs_get_attr(const char *devpath, const char *attr, char *value, size_t bufsize); -extern int scsi_get_serial (struct sysfs_class_device *scsi_dev, - const char *devname, int page_code, char *serial, - int len); +extern int scsi_get_serial (struct sysfs_device *scsi_dev, const char + *devname, int page_code, char *serial, int + len); extern void log_message (int level, const char *format, ...) __attribute__ ((format (printf, 2, 3))); diff --git a/extras/scsi_id/scsi_serial.c b/extras/scsi_id/scsi_serial.c index 9fb0f05e61..ae83330c30 100644 --- a/extras/scsi_id/scsi_serial.c +++ b/extras/scsi_id/scsi_serial.c @@ -32,7 +32,6 @@ #include <syslog.h> #include <scsi/sg.h> #include <sysfs/libsysfs.h> - #include "scsi_id.h" #include "scsi.h" @@ -71,12 +70,6 @@ static const struct scsi_id_search_values id_search_list[] = { static const char hex_str[]="0123456789abcdef"; /* - * XXX maybe move all these to an sg_io.c file. - * - * From here ... - */ - -/* * Values returned in the result/status, only the ones used by the code * are used here. */ @@ -160,8 +153,7 @@ static int sg_err_category3(struct sg_io_hdr *hp) hp->sbp, hp->sb_len_wr); } -static int scsi_dump_sense(struct sysfs_class_device *scsi_dev, - struct sg_io_hdr *io) +static int scsi_dump_sense(struct sysfs_device *scsi_dev, struct sg_io_hdr *io) { unsigned char *sense_buffer; int s; @@ -257,7 +249,7 @@ static int scsi_dump_sense(struct sysfs_class_device *scsi_dev, scsi_dev->name, sense_buffer[0], sense_buffer[2]); log_message(LOG_WARNING, - "%s: non-extended sense class %d code 0x%0x ", + "%s: non-extended sense class %d code 0x%0x\n", scsi_dev->name, sense_class, code); } @@ -277,7 +269,7 @@ static int scsi_dump_sense(struct sysfs_class_device *scsi_dev, return -1; } -static int scsi_dump(struct sysfs_class_device *scsi_dev, struct sg_io_hdr *io) +static int scsi_dump(struct sysfs_device *scsi_dev, struct sg_io_hdr *io) { if (!io->status && !io->host_status && !io->msg_status && !io->driver_status) { @@ -298,9 +290,9 @@ static int scsi_dump(struct sysfs_class_device *scsi_dev, struct sg_io_hdr *io) return -1; } -static int scsi_inquiry(struct sysfs_class_device *scsi_dev, int fd, - unsigned char evpd, unsigned char page, unsigned - char *buf, unsigned int buflen) +static int scsi_inquiry(struct sysfs_device *scsi_dev, int fd, unsigned + char evpd, unsigned char page, unsigned char *buf, + unsigned int buflen) { unsigned char inq_cmd[INQUIRY_CMDLEN] = { INQUIRY_CMD, evpd, page, 0, buflen, 0 }; @@ -332,7 +324,7 @@ resend: io_hdr.timeout = DEF_TIMEOUT; if (ioctl(fd, SG_IO, &io_hdr) < 0) { - log_message(LOG_WARNING, "%s ioctl failed: %s\n", + log_message(LOG_WARNING, "%s: ioctl failed: %s\n", scsi_dev->name, strerror(errno)); return -1; } @@ -349,11 +341,6 @@ resend: retval = scsi_dump(scsi_dev, &io_hdr); } - /* - * XXX where is the length checked? That is, was our request - * buffer long enough? - */ - if (!retval) { retval = buflen; memcpy(buf, buffer, retval); @@ -369,13 +356,7 @@ resend: return retval; } -/* - * XXX maybe move all these to an sg_io.c file. - * - * Ending here. - */ - -static int do_scsi_page0_inquiry(struct sysfs_class_device *scsi_dev, int fd, +static int do_scsi_page0_inquiry(struct sysfs_device *scsi_dev, int fd, char *buffer, int len) { int retval; @@ -392,7 +373,7 @@ static int do_scsi_page0_inquiry(struct sysfs_class_device *scsi_dev, int fd, return 1; } if (buffer[3] > len) { - log_message(LOG_WARNING, "%s: page 0 buffer too long %d", + log_message(LOG_WARNING, "%s: page 0 buffer too long %d\n", scsi_dev->name, buffer[3]); return 1; } @@ -417,7 +398,7 @@ static int do_scsi_page0_inquiry(struct sysfs_class_device *scsi_dev, int fd, return 1; } if (!strncmp(&buffer[VENDOR_LENGTH], vendor, VENDOR_LENGTH)) { - log_message(LOG_WARNING, "%s invalid page0 data\n", + log_message(LOG_WARNING, "%s: invalid page0 data\n", scsi_dev->name); return 1; } @@ -429,8 +410,7 @@ static int do_scsi_page0_inquiry(struct sysfs_class_device *scsi_dev, int fd, * The caller checks that serial is long enough to include the vendor + * model. */ -static int prepend_vendor_model(struct sysfs_class_device *scsi_dev, - char *serial) +static int prepend_vendor_model(struct sysfs_device *scsi_dev, char *serial) { char attr[MAX_ATTR_LEN]; int ind; @@ -477,10 +457,9 @@ static int prepend_vendor_model(struct sysfs_class_device *scsi_dev, * check_fill_0x83_id - check the page 0x83 id, if OK allocate and fill * serial number. **/ -static int check_fill_0x83_id(struct sysfs_class_device *scsi_dev, - char *page_83, - const struct scsi_id_search_values *id_search, - char *serial, int max_len) +static int check_fill_0x83_id(struct sysfs_device *scsi_dev, char + *page_83, const struct scsi_id_search_values + *id_search, char *serial, int max_len) { int i, j, len; @@ -565,7 +544,7 @@ static int check_fill_0x83_id(struct sysfs_class_device *scsi_dev, return 0; } -static int do_scsi_page83_inquiry(struct sysfs_class_device *scsi_dev, int fd, +static int do_scsi_page83_inquiry(struct sysfs_device *scsi_dev, int fd, char *serial, int len) { int retval; @@ -622,7 +601,7 @@ static int do_scsi_page83_inquiry(struct sysfs_class_device *scsi_dev, int fd, return 1; } -static int do_scsi_page80_inquiry(struct sysfs_class_device *scsi_dev, int fd, +static int do_scsi_page80_inquiry(struct sysfs_device *scsi_dev, int fd, char *serial, int max_len) { int retval; @@ -662,7 +641,7 @@ static int do_scsi_page80_inquiry(struct sysfs_class_device *scsi_dev, int fd, return 0; } -int scsi_get_serial (struct sysfs_class_device *scsi_dev, const char *devname, +int scsi_get_serial (struct sysfs_device *scsi_dev, const char *devname, int page_code, char *serial, int len) { unsigned char page0[256]; @@ -674,9 +653,9 @@ int scsi_get_serial (struct sysfs_class_device *scsi_dev, const char *devname, } memset(serial, 0, len); dprintf("opening %s\n", devname); - fd = open(devname, O_RDONLY); + fd = open(devname, O_RDONLY | O_NONBLOCK); if (fd < 0) { - log_message(LOG_WARNING, "%s cannot open %s: %s\n", + log_message(LOG_WARNING, "%s: cannot open %s: %s\n", scsi_dev->name, devname, strerror(errno)); return 1; } @@ -698,7 +677,7 @@ int scsi_get_serial (struct sysfs_class_device *scsi_dev, const char *devname, goto completed; } } else if (page_code != 0x00) { - log_message(LOG_WARNING, "%s unsupported page code 0x%d\n", + log_message(LOG_WARNING, "%s: unsupported page code 0x%d\n", scsi_dev->name, page_code); return 1; } @@ -743,6 +722,7 @@ int scsi_get_serial (struct sysfs_class_device *scsi_dev, const char *devname, retval = 1; completed: if (close(fd) < 0) - log_message(LOG_WARNING, "close failed: %s", strerror(errno)); + log_message(LOG_WARNING, "%s: close failed: %s\n", + scsi_dev->name, strerror(errno)); return retval; } |