summaryrefslogtreecommitdiff
path: root/man/systemd.service.xml
diff options
context:
space:
mode:
Diffstat (limited to 'man/systemd.service.xml')
-rw-r--r--man/systemd.service.xml46
1 files changed, 23 insertions, 23 deletions
diff --git a/man/systemd.service.xml b/man/systemd.service.xml
index 8afdbc513b..d7c53087f4 100644
--- a/man/systemd.service.xml
+++ b/man/systemd.service.xml
@@ -254,7 +254,7 @@
for, and its node will be bind-mounted over the default bus
node location, so the service can only access the bus through
its own endpoint. Note that custom bus endpoints default to a
- 'deny all' policy. Hence, if at least one
+ "deny all" policy. Hence, if at least one
<varname>BusPolicy=</varname> directive is given, you have to
make sure to add explicit rules for everything the service
should be able to do.</para>
@@ -403,11 +403,11 @@
<para>Note that it is usually not sufficient to specify a
command for this setting that only asks the service to
- terminate (for example by queuing some form of termination
+ terminate (for example, by queuing some form of termination
signal for it), but does not wait for it to do so. Since the
remaining processes of the services are killed using
<constant>SIGKILL</constant> immediately after the command
- exited this would not result in a clean stop. The specified
+ exited, this would not result in a clean stop. The specified
command should hence be a synchronous operation, not an
asynchronous one.</para></listitem>
</varlistentry>
@@ -628,7 +628,7 @@
</tgroup>
</table>
- <para>As exceptions to the setting above the service will not
+ <para>As exceptions to the setting above, the service will not
be restarted if the exit code or signal is specified in
<varname>RestartPreventExitStatus=</varname> (see below).
Also, the services will always be restarted if the exit code
@@ -646,8 +646,8 @@
<varlistentry>
<term><varname>SuccessExitStatus=</varname></term>
- <listitem><para>Takes a list of exit status definitions that
- when returned by the main service process will be considered
+ <listitem><para>Takes a list of exit status definitions that,
+ when returned by the main service process, will be considered
successful termination, in addition to the normal successful
exit code 0 and the signals <constant>SIGHUP</constant>,
<constant>SIGINT</constant>, <constant>SIGTERM</constant>, and
@@ -679,8 +679,8 @@
<varlistentry>
<term><varname>RestartPreventExitStatus=</varname></term>
- <listitem><para>Takes a list of exit status definitions that
- when returned by the main service process will prevent
+ <listitem><para>Takes a list of exit status definitions that,
+ when returned by the main service process, will prevent
automatic service restarts, regardless of the restart setting
configured with <varname>Restart=</varname>. Exit status
definitions can either be numeric exit codes or termination
@@ -699,8 +699,8 @@
<varlistentry>
<term><varname>RestartForceExitStatus=</varname></term>
- <listitem><para>Takes a list of exit status definitions that
- when returned by the main service process will force automatic
+ <listitem><para>Takes a list of exit status definitions that,
+ when returned by the main service process, will force automatic
service restarts, regardless of the restart setting configured
with <varname>Restart=</varname>. The argument format is
similar to
@@ -779,8 +779,8 @@
<term><varname>Sockets=</varname></term>
<listitem><para>Specifies the name of the socket units this
service shall inherit socket file descriptors from when the
- service is started. Normally it should not be necessary to use
- this setting as all socket file descriptors whose unit shares
+ service is started. Normally, it should not be necessary to use
+ this setting, as all socket file descriptors whose unit shares
the same name as the service (subject to the different unit
name suffix of course) are passed to the spawned
process.</para>
@@ -789,7 +789,7 @@
to multiple processes simultaneously. Also note that a
different service may be activated on incoming socket traffic
than the one which is ultimately configured to inherit the
- socket file descriptors. Or in other words: the
+ socket file descriptors. Or, in other words: the
<varname>Service=</varname> setting of
<filename>.socket</filename> units does not have to match the
inverse of the <varname>Sockets=</varname> setting of the
@@ -992,7 +992,7 @@
contains, resulting in a single argument. Use
<literal>$FOO</literal> as a separate word on the command line, in
which case it will be replaced by the value of the environment
- variable split at whitespace resulting in zero or more arguments.
+ variable split at whitespace, resulting in zero or more arguments.
For this type of expansion, quotes are respected when splitting
into words, and afterwards removed.</para>
@@ -1175,7 +1175,7 @@ WantedBy=multi-user.target</programlisting>
<example>
<title>Oneshot service</title>
- <para>Sometimes units should just execute an action without
+ <para>Sometimes, units should just execute an action without
keeping active processes, such as a filesystem check or a
cleanup action on boot. For this,
<varname>Type=</varname><option>oneshot</option> exists. Units
@@ -1194,10 +1194,10 @@ ExecStart=/usr/sbin/foo-cleanup
WantedBy=multi-user.target</programlisting>
<para>Note that systemd will consider the unit to be in the
- state 'starting' until the program has terminated, so ordered
+ state "starting" until the program has terminated, so ordered
dependencies will wait for the program to finish before starting
- themselves. The unit will revert to the 'inactive' state after
- the execution is done, never reaching the 'active' state. That
+ themselves. The unit will revert to the "inactive" state after
+ the execution is done, never reaching the "active" state. That
means another request to start the unit will perform the action
again.</para>
@@ -1214,7 +1214,7 @@ WantedBy=multi-user.target</programlisting>
<para>Similarly to the oneshot services, there are sometimes
units that need to execute a program to set up something and
then execute another to shut it down, but no process remains
- active while they are considered 'started'. Network
+ active while they are considered "started". Network
configuration can sometimes fall into this category. Another use
case is if a oneshot service shall not be executed a each time
when they are pulled in as a dependency, but only the first
@@ -1227,11 +1227,11 @@ WantedBy=multi-user.target</programlisting>
types, but is most useful with
<varname>Type=</varname><option>oneshot</option> and
<varname>Type=</varname><option>simple</option>. With
- <varname>Type=</varname><option>oneshot</option> systemd waits
+ <varname>Type=</varname><option>oneshot</option>, systemd waits
until the start action has completed before it considers the
unit to be active, so dependencies start only after the start
action has succeeded. With
- <varname>Type=</varname><option>simple</option> dependencies
+ <varname>Type=</varname><option>simple</option>, dependencies
will start immediately after the start action has been
dispatched. The following unit provides an example for a simple
static firewall.</para>
@@ -1266,7 +1266,7 @@ WantedBy=multi-user.target</programlisting>
<varname>RemainAfterExit=</varname><option>no</option>), the
service is considered started.</para>
- <para>Often a traditional daemon only consists of one process.
+ <para>Often, a traditional daemon only consists of one process.
Therefore, if only one process is left after the original
process terminates, systemd will consider that process the main
process of the service. In that case, the
@@ -1281,7 +1281,7 @@ WantedBy=multi-user.target</programlisting>
traditional PID file, systemd will be able to read the main PID
from there. Please set <varname>PIDFile=</varname> accordingly.
Note that the daemon should write that file before finishing
- with its initialization, otherwise systemd might try to read the
+ with its initialization. Otherwise, systemd might try to read the
file before it exists.</para>
<para>The following example shows a simple daemon that forks and