diff options
Diffstat (limited to 'man')
227 files changed, 0 insertions, 58914 deletions
diff --git a/man/Makefile b/man/Makefile deleted file mode 120000 index bd1047548b..0000000000 --- a/man/Makefile +++ /dev/null @@ -1 +0,0 @@ -../src/Makefile
\ No newline at end of file diff --git a/man/binfmt.d.xml b/man/binfmt.d.xml deleted file mode 100644 index 5b63cfb4c3..0000000000 --- a/man/binfmt.d.xml +++ /dev/null @@ -1,101 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2011 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="binfmt.d" conditional='ENABLE_BINFMT' - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>binfmt.d</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>binfmt.d</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>binfmt.d</refname> - <refpurpose>Configure additional binary formats for - executables at boot</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/binfmt.d/*.conf</filename></para> - <para><filename>/run/binfmt.d/*.conf</filename></para> - <para><filename>/usr/lib/binfmt.d/*.conf</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>At boot, - <citerefentry><refentrytitle>systemd-binfmt.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - reads configuration files from the above directories to register - in the kernel additional binary formats for executables.</para> - </refsect1> - - <refsect1> - <title>Configuration Format</title> - - <para>Each file contains a list of binfmt_misc kernel binary - format rules. Consult <ulink - url="https://www.kernel.org/doc/Documentation/binfmt_misc.txt">binfmt_misc.txt</ulink> - for more information on registration of additional binary formats - and how to write rules.</para> - - <para>Empty lines and lines beginning with ; and # are ignored. - Note that this means you may not use ; and # as delimiter in - binary format rules.</para> - </refsect1> - - <xi:include href="standard-conf.xml" xpointer="confd" /> - - <refsect1> - <title>Example</title> - <example> - <title>/etc/binfmt.d/wine.conf example:</title> - - <programlisting># Start WINE on Windows executables -:DOSWin:M::MZ::/usr/bin/wine:</programlisting> - </example> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-binfmt.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-delta</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>wine</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/bootctl.xml b/man/bootctl.xml deleted file mode 100644 index ebd58750d3..0000000000 --- a/man/bootctl.xml +++ /dev/null @@ -1,128 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="bootctl" conditional='ENABLE_EFI' - xmlns:xi="http://www.w3.org/2001/XInclude"> - <refentryinfo> - <title>bootctl</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Kay</firstname> - <surname>Sievers</surname> - <email>kay@vrfy.org</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>bootctl</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>bootctl</refname> - <refpurpose>Control the firmware and boot manager settings</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>bootctl <arg choice="opt" rep="repeat">OPTIONS</arg>status</command> - </cmdsynopsis> - <cmdsynopsis> - <command>bootctl <arg choice="opt" rep="repeat">OPTIONS</arg>update</command> - </cmdsynopsis> - <cmdsynopsis> - <command>bootctl <arg choice="opt" rep="repeat">OPTIONS</arg>install</command> - </cmdsynopsis> - <cmdsynopsis> - <command>bootctl <arg choice="opt" rep="repeat">OPTIONS</arg>remove</command> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>bootctl</command> checks, updates, - installs or removes the boot loader from the current - system.</para> - - <para><command>bootctl status</command> checks and prints the - currently installed versions of the boot loader binaries and - all current EFI boot variables.</para> - - <para><command>bootctl update</command> updates all installed - versions of systemd-boot, if the current version is newer than the - version installed in the EFI system partition. This also includes - the EFI default/fallback loader at /EFI/Boot/boot*.efi. A - systemd-boot entry in the EFI boot variables is created if there - is no current entry. The created entry will be added to the end of - the boot order list.</para> - - <para><command>bootctl install</command> installs systemd-boot into - the EFI system partition. A copy of systemd-boot will be stored as - the EFI default/fallback loader at /EFI/Boot/boot*.efi. A systemd-boot - entry in the EFI boot variables is created and added to the top - of the boot order list.</para> - - <para><command>bootctl remove</command> removes all installed - versions of systemd-boot from the EFI system partition, and removes - systemd-boot from the EFI boot variables.</para> - - <para>If no command is passed, <command>status</command> is - implied.</para> - </refsect1> - - <refsect1> - <title>Options</title> - <para>The following options are understood:</para> - - <variablelist> - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - <varlistentry> - <term><option>--path</option></term> - <listitem><para>Path to the EFI system partition. The default is /boot.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--no-variables</option></term> - <listitem><para>Do not touch the EFI boot variables.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Exit status</title> - <para>On success, 0 is returned, a non-zero failure - code otherwise.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <ulink url="http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec">Boot loader specification</ulink> - <ulink url="http://www.freedesktop.org/wiki/Software/systemd/BootLoaderInterface">Systemd boot loader interface</ulink> - </para> - </refsect1> -</refentry> diff --git a/man/bootup.xml b/man/bootup.xml deleted file mode 100644 index 986996398c..0000000000 --- a/man/bootup.xml +++ /dev/null @@ -1,305 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="bootup"> - - <refentryinfo> - <title>bootup</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>bootup</refentrytitle> - <manvolnum>7</manvolnum> - </refmeta> - - <refnamediv> - <refname>bootup</refname> - <refpurpose>System bootup process</refpurpose> - </refnamediv> - - <refsect1> - <title>Description</title> - - <para>A number of different components are involved in the system - boot. Immediately after power-up, the system BIOS will do minimal - hardware initialization, and hand control over to a boot loader - stored on a persistent storage device. This boot loader will then - invoke an OS kernel from disk (or the network). In the Linux case, - this kernel (optionally) extracts and executes an initial RAM disk - image (initrd), such as generated by - <citerefentry project='die-net'><refentrytitle>dracut</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - which looks for the root file system (possibly using - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - for this). After the root file system is found and mounted, the - initrd hands over control to the host's system manager (such as - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>) - stored on the OS image, which is then responsible for probing all - remaining hardware, mounting all necessary file systems and - spawning all configured services.</para> - - <para>On shutdown, the system manager stops all services, unmounts - all file systems (detaching the storage technologies backing - them), and then (optionally) jumps back into the initrd code which - unmounts/detaches the root file system and the storage it resides - on. As a last step, the system is powered down.</para> - - <para>Additional information about the system boot process may be - found in - <citerefentry project='man-pages'><refentrytitle>boot</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>System Manager Bootup</title> - - <para>At boot, the system manager on the OS image is responsible - for initializing the required file systems, services and drivers - that are necessary for operation of the system. On - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - systems, this process is split up in various discrete steps which - are exposed as target units. (See - <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for detailed information about target units.) The boot-up process - is highly parallelized so that the order in which specific target - units are reached is not deterministic, but still adheres to a - limited amount of ordering structure.</para> - - <para>When systemd starts up the system, it will activate all - units that are dependencies of <filename>default.target</filename> - (as well as recursively all dependencies of these dependencies). - Usually, <filename>default.target</filename> is simply an alias of - <filename>graphical.target</filename> or - <filename>multi-user.target</filename>, depending on whether the - system is configured for a graphical UI or only for a text - console. To enforce minimal ordering between the units pulled in, - a number of well-known target units are available, as listed on - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - - <para>The following chart is a structural overview of these - well-known units and their position in the boot-up logic. The - arrows describe which units are pulled in and ordered before which - other units. Units near the top are started before units nearer to - the bottom of the chart.</para> - -<programlisting>local-fs-pre.target - | - v -(various mounts and (various swap (various cryptsetup - fsck services...) devices...) devices...) (various low-level (various low-level - | | | services: udevd, API VFS mounts: - v v v tmpfiles, random mqueue, configfs, - local-fs.target swap.target cryptsetup.target seed, sysctl, ...) debugfs, ...) - | | | | | - \__________________|_________________ | ___________________|____________________/ - \|/ - v - sysinit.target - | - ____________________________________/|\________________________________________ - / | | | \ - | | | | | - v v | v v - (various (various | (various rescue.service - timers...) paths...) | sockets...) | - | | | | v - v v | v <emphasis>rescue.target</emphasis> - timers.target paths.target | sockets.target - | | | | - v \_________________ | ___________________/ - \|/ - v - basic.target - | - ____________________________________/| emergency.service - / | | | - | | | v - v v v <emphasis>emergency.target</emphasis> - display- (various system (various system - manager.service services services) - | required for | - | graphical UIs) v - | | <emphasis>multi-user.target</emphasis> - | | | - \_________________ | _________________/ - \|/ - v - <emphasis>graphical.target</emphasis></programlisting> - - <para>Target units that are commonly used as boot targets are - <emphasis>emphasized</emphasis>. These units are good choices as - goal targets, for example by passing them to the - <varname>systemd.unit=</varname> kernel command line option (see - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>) - or by symlinking <filename>default.target</filename> to them. - </para> - - <para><filename>timers.target</filename> is pulled-in by - <filename>basic.target</filename> asynchronously. This allows - timers units to depend on services which become only available - later in boot.</para> - </refsect1> - - <refsect1> - <title>Bootup in the Initial RAM Disk (initrd)</title> - <para>The initial RAM disk implementation (initrd) can be set up - using systemd as well. In this case, boot up inside the initrd - follows the following structure.</para> - - <para>The default target in the initrd is - <filename>initrd.target</filename>. The bootup process begins - identical to the system manager bootup (see above) until it - reaches <filename>basic.target</filename>. From there, systemd - approaches the special target <filename>initrd.target</filename>. - When the root device becomes available, - <filename>initd-root-device.target</filename> is reached. - If the root device can be mounted at - <filename>/sysroot</filename>, the - <filename>sysroot.mount</filename> unit becomes active and - <filename>initrd-root-fs.target</filename> is reached. The service - <filename>initrd-parse-etc.service</filename> scans - <filename>/sysroot/etc/fstab</filename> for a possible - <filename>/usr</filename> mount point and additional entries - marked with the <emphasis>x-initrd.mount</emphasis> option. All - entries found are mounted below <filename>/sysroot</filename>, and - <filename>initrd-fs.target</filename> is reached. The service - <filename>initrd-cleanup.service</filename> isolates to the - <filename>initrd-switch-root.target</filename>, where cleanup - services can run. As the very last step, the - <filename>initrd-switch-root.service</filename> is activated, - which will cause the system to switch its root to - <filename>/sysroot</filename>. - </para> - -<programlisting> : (beginning identical to above) - : - v - basic.target - | emergency.service - ______________________/| | - / | v - | initrd-root-device.target <emphasis>emergency.target</emphasis> - | | - | v - | sysroot.mount - | | - | v - | initrd-root-fs.target - | | - | v - v initrd-parse-etc.service - (custom initrd | - services...) v - | (sysroot-usr.mount and - | various mounts marked - | with fstab option - | x-initrd.mount...) - | | - | v - | initrd-fs.target - \______________________ | - \| - v - initrd.target - | - v - initrd-cleanup.service - isolates to - initrd-switch-root.target - | - v - ______________________/| - / v - | initrd-udevadm-cleanup-db.service - v | - (custom initrd | - services...) | - \______________________ | - \| - v - initrd-switch-root.target - | - v - initrd-switch-root.service - | - v - Transition to Host OS</programlisting> - </refsect1> - - <refsect1> - <title>System Manager Shutdown</title> - - <para>System shutdown with systemd also consists of various target - units with some minimal ordering structure applied:</para> - -<programlisting> (conflicts with (conflicts with - all system all file system - services) mounts, swaps, - | cryptsetup - | devices, ...) - | | - v v - shutdown.target umount.target - | | - \_______ ______/ - \ / - v - (various low-level - services) - | - v - final.target - | - _____________________________________/ \_________________________________ - / | | \ - | | | | - v v v v -systemd-reboot.service systemd-poweroff.service systemd-halt.service systemd-kexec.service - | | | | - v v v v - <emphasis>reboot.target</emphasis> <emphasis>poweroff.target</emphasis> <emphasis>halt.target</emphasis> <emphasis>kexec.target</emphasis></programlisting> - - <para>Commonly used system shutdown targets are - <emphasis>emphasized</emphasis>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>boot</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>dracut</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/busctl.xml b/man/busctl.xml deleted file mode 100644 index b71a174634..0000000000 --- a/man/busctl.xml +++ /dev/null @@ -1,480 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="busctl" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>busctl</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>A monkey with a typewriter</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>busctl</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>busctl</refname> - <refpurpose>Introspect the bus</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>busctl</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="opt">COMMAND</arg> - <arg choice="opt" rep="repeat"><replaceable>NAME</replaceable></arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>busctl</command> may be used to - introspect and monitor the D-Bus bus.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--address=<replaceable>ADDRESS</replaceable></option></term> - - <listitem><para>Connect to the bus specified by - <replaceable>ADDRESS</replaceable> instead of using suitable - defaults for either the system or user bus (see - <option>--system</option> and <option>--user</option> - options).</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--show-machine</option></term> - - <listitem><para>When showing the list of peers, show a - column containing the names of containers they belong to. - See - <citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--unique</option></term> - - <listitem><para>When showing the list of peers, show only - "unique" names (of the form - <literal>:<replaceable>number</replaceable>.<replaceable>number</replaceable></literal>). - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--acquired</option></term> - - <listitem><para>The opposite of <option>--unique</option> — - only "well-known" names will be shown.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--activatable</option></term> - - <listitem><para>When showing the list of peers, show only - peers which have actually not been activated yet, but may be - started automatically if accessed.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--match=<replaceable>MATCH</replaceable></option></term> - - <listitem><para>When showing messages being exchanged, show only the - subset matching <replaceable>MATCH</replaceable>.</para></listitem> - <!-- TODO: link to sd_bus_add_match when it is written? --> - </varlistentry> - - <varlistentry> - <term><option>--size=</option></term> - - <listitem> - <para>When used with the <command>capture</command> command, - specifies the maximum bus message size to capture - ("snaplen"). Defaults to 4096 bytes.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--list</option></term> - - <listitem> - <para>When used with the <command>tree</command> command, shows a - flat list of object paths instead of a tree.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--quiet</option></term> - - <listitem> - <para>When used with the <command>call</command> command, - suppresses display of the response message payload. Note that even - if this option is specified, errors returned will still be - printed and the tool will indicate success or failure with - the process exit code.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--verbose</option></term> - - <listitem> - <para>When used with the <command>call</command> or - <command>get-property</command> command, shows output in a - more verbose format.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--expect-reply=</option><replaceable>BOOL</replaceable></term> - - <listitem> - <para>When used with the <command>call</command> command, - specifies whether <command>busctl</command> shall wait for - completion of the method call, output the returned method - response data, and return success or failure via the process - exit code. If this is set to <literal>no</literal>, the - method call will be issued but no response is expected, the - tool terminates immediately, and thus no response can be - shown, and no success or failure is returned via the exit - code. To only suppress output of the reply message payload, - use <option>--quiet</option> above. Defaults to - <literal>yes</literal>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--auto-start=</option><replaceable>BOOL</replaceable></term> - - <listitem> - <para>When used with the <command>call</command> command, specifies - whether the method call should implicitly activate the - called service, should it not be running yet but is - configured to be auto-started. Defaults to - <literal>yes</literal>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--allow-interactive-authorization=</option><replaceable>BOOL</replaceable></term> - - <listitem> - <para>When used with the <command>call</command> command, - specifies whether the services may enforce interactive - authorization while executing the operation, if the security - policy is configured for this. Defaults to - <literal>yes</literal>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--timeout=</option><replaceable>SECS</replaceable></term> - - <listitem> - <para>When used with the <command>call</command> command, - specifies the maximum time to wait for method call - completion. If no time unit is specified, assumes - seconds. The usual other units are understood, too (ms, us, - s, min, h, d, w, month, y). Note that this timeout does not - apply if <option>--expect-reply=no</option> is used, as the - tool does not wait for any reply message then. When not - specified or when set to 0, the default of - <literal>25s</literal> is assumed.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--augment-creds=</option><replaceable>BOOL</replaceable></term> - - <listitem> - <para>Controls whether credential data reported by - <command>list</command> or <command>status</command> shall - be augmented with data from - <filename>/proc</filename>. When this is turned on, the data - shown is possibly inconsistent, as the data read from - <filename>/proc</filename> might be more recent than the rest of - the credential information. Defaults to <literal>yes</literal>.</para> - </listitem> - </varlistentry> - - <xi:include href="user-system-options.xml" xpointer="user" /> - <xi:include href="user-system-options.xml" xpointer="system" /> - <xi:include href="user-system-options.xml" xpointer="host" /> - <xi:include href="user-system-options.xml" xpointer="machine" /> - - <xi:include href="standard-options.xml" xpointer="no-pager" /> - <xi:include href="standard-options.xml" xpointer="no-legend" /> - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - </refsect1> - - <refsect1> - <title>Commands</title> - - <para>The following commands are understood:</para> - - <variablelist> - <varlistentry> - <term><command>list</command></term> - - <listitem><para>Show all peers on the bus, by their service - names. By default, shows both unique and well-known names, but - this may be changed with the <option>--unique</option> and - <option>--acquired</option> switches. This is the default - operation if no command is specified.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>status</command> <arg choice="opt"><replaceable>SERVICE</replaceable></arg></term> - - <listitem><para>Show process information and credentials of a - bus service (if one is specified by its unique or well-known - name), a process (if one is specified by its numeric PID), or - the owner of the bus (if no parameter is - specified).</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>monitor</command> <arg choice="opt" rep="repeat"><replaceable>SERVICE</replaceable></arg></term> - - <listitem><para>Dump messages being exchanged. If - <replaceable>SERVICE</replaceable> is specified, show messages - to or from this peer, identified by its well-known or unique - name. Otherwise, show all messages on the bus. Use Ctrl-C to - terminate the dump.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>capture</command> <arg choice="opt" rep="repeat"><replaceable>SERVICE</replaceable></arg></term> - - <listitem><para>Similar to <command>monitor</command> but - writes the output in pcap format (for details, see the <ulink - url="http://wiki.wireshark.org/Development/LibpcapFileFormat">Libpcap - File Format</ulink> description. Make sure to redirect the - output to STDOUT to a file. Tools like - <citerefentry project='die-net'><refentrytitle>wireshark</refentrytitle><manvolnum>1</manvolnum></citerefentry> - may be used to dissect and view the generated - files.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>tree</command> <arg choice="opt" rep="repeat"><replaceable>SERVICE</replaceable></arg></term> - - <listitem><para>Shows an object tree of one or more - services. If <replaceable>SERVICE</replaceable> is specified, - show object tree of the specified services only. Otherwise, - show all object trees of all services on the bus that acquired - at least one well-known name.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>introspect</command> <arg choice="plain"><replaceable>SERVICE</replaceable></arg> <arg choice="plain"><replaceable>OBJECT</replaceable></arg> <arg choice="opt"><replaceable>INTERFACE</replaceable></arg></term> - - <listitem><para>Show interfaces, methods, properties and - signals of the specified object (identified by its path) on - the specified service. If the interface argument is passed, the - output is limited to members of the specified - interface.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>call</command> <arg choice="plain"><replaceable>SERVICE</replaceable></arg> <arg choice="plain"><replaceable>OBJECT</replaceable></arg> <arg choice="plain"><replaceable>INTERFACE</replaceable></arg> <arg choice="plain"><replaceable>METHOD</replaceable></arg> <arg choice="opt"><replaceable>SIGNATURE</replaceable> <arg choice="opt" rep="repeat"><replaceable>ARGUMENT</replaceable></arg></arg></term> - - <listitem><para>Invoke a method and show the response. Takes a - service name, object path, interface name and method name. If - parameters shall be passed to the method call, a signature - string is required, followed by the arguments, individually - formatted as strings. For details on the formatting used, see - below. To suppress output of the returned data, use the - <option>--quiet</option> option.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>get-property</command> <arg choice="plain"><replaceable>SERVICE</replaceable></arg> <arg choice="plain"><replaceable>OBJECT</replaceable></arg> <arg choice="plain"><replaceable>INTERFACE</replaceable></arg> <arg choice="plain" rep="repeat"><replaceable>PROPERTY</replaceable></arg></term> - - <listitem><para>Retrieve the current value of one or more - object properties. Takes a service name, object path, - interface name and property name. Multiple properties may be - specified at once, in which case their values will be shown one - after the other, separated by newlines. The output is, by - default, in terse format. Use <option>--verbose</option> for a - more elaborate output format.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>set-property</command> <arg choice="plain"><replaceable>SERVICE</replaceable></arg> <arg choice="plain"><replaceable>OBJECT</replaceable></arg> <arg choice="plain"><replaceable>INTERFACE</replaceable></arg> <arg choice="plain"><replaceable>PROPERTY</replaceable></arg> <arg choice="plain"><replaceable>SIGNATURE</replaceable></arg> <arg choice="plain" rep="repeat"><replaceable>ARGUMENT</replaceable></arg></term> - - <listitem><para>Set the current value of an object - property. Takes a service name, object path, interface name, - property name, property signature, followed by a list of - parameters formatted as strings.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>help</command></term> - - <listitem><para>Show command syntax help.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Parameter Formatting</title> - - <para>The <command>call</command> and - <command>set-property</command> commands take a signature string - followed by a list of parameters formatted as string (for details - on D-Bus signature strings, see the <ulink - url="http://dbus.freedesktop.org/doc/dbus-specification.html#type-system">Type - system chapter of the D-Bus specification</ulink>). For simple - types, each parameter following the signature should simply be the - parameter's value formatted as string. Positive boolean values may - be formatted as <literal>true</literal>, <literal>yes</literal>, - <literal>on</literal>, or <literal>1</literal>; negative boolean - values may be specified as <literal>false</literal>, - <literal>no</literal>, <literal>off</literal>, or - <literal>0</literal>. For arrays, a numeric argument for the - number of entries followed by the entries shall be specified. For - variants, the signature of the contents shall be specified, - followed by the contents. For dictionaries and structs, the - contents of them shall be directly specified.</para> - - <para>For example, - <programlisting>s jawoll</programlisting> is the formatting - of a single string <literal>jawoll</literal>.</para> - - <para> - <programlisting>as 3 hello world foobar</programlisting> - is the formatting of a string array with three entries, - <literal>hello</literal>, <literal>world</literal> and - <literal>foobar</literal>.</para> - - <para> - <programlisting>a{sv} 3 One s Eins Two u 2 Yes b true</programlisting> - is the formatting of a dictionary - array that maps strings to variants, consisting of three - entries. The string <literal>One</literal> is assigned the - string <literal>Eins</literal>. The string - <literal>Two</literal> is assigned the 32-bit unsigned - integer 2. The string <literal>Yes</literal> is assigned a - positive boolean.</para> - - <para>Note that the <command>call</command>, - <command>get-property</command>, <command>introspect</command> - commands will also generate output in this format for the returned - data. Since this format is sometimes too terse to be easily - understood, the <command>call</command> and - <command>get-property</command> commands may generate a more - verbose, multi-line output when passed the - <option>--verbose</option> option.</para> - </refsect1> - - <refsect1> - <title>Examples</title> - - <example> - <title>Write and Read a Property</title> - - <para>The following two commands first write a property and then - read it back. The property is found on the - <literal>/org/freedesktop/systemd1</literal> object of the - <literal>org.freedesktop.systemd1</literal> service. The name of - the property is <literal>LogLevel</literal> on the - <literal>org.freedesktop.systemd1.Manager</literal> - interface. The property contains a single string:</para> - - <programlisting># busctl set-property org.freedesktop.systemd1 /org/freedesktop/systemd1 org.freedesktop.systemd1.Manager LogLevel s debug -# busctl get-property org.freedesktop.systemd1 /org/freedesktop/systemd1 org.freedesktop.systemd1.Manager LogLevel -s "debug"</programlisting> - - </example> - - <example> - <title>Terse and Verbose Output</title> - - <para>The following two commands read a property that contains - an array of strings, and first show it in terse format, followed - by verbose format:</para> - - <programlisting>$ busctl get-property org.freedesktop.systemd1 /org/freedesktop/systemd1 org.freedesktop.systemd1.Manager Environment -as 2 "LANG=en_US.UTF-8" "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin" -$ busctl get-property --verbose org.freedesktop.systemd1 /org/freedesktop/systemd1 org.freedesktop.systemd1.Manager Environment -ARRAY "s" { - STRING "LANG=en_US.UTF-8"; - STRING "PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin"; -};</programlisting> - </example> - - <example> - <title>Invoking a Method</title> - - <para>The following command invokes the - <literal>StartUnit</literal> method on the - <literal>org.freedesktop.systemd1.Manager</literal> - interface of the - <literal>/org/freedesktop/systemd1</literal> object - of the <literal>org.freedesktop.systemd1</literal> - service, and passes it two strings - <literal>cups.service</literal> and - <literal>replace</literal>. As a result of the method - call, a single object path parameter is received and - shown:</para> - - <programlisting># busctl call org.freedesktop.systemd1 /org/freedesktop/systemd1 org.freedesktop.systemd1.Manager StartUnit ss "cups.service" "replace" -o "/org/freedesktop/systemd1/job/42684"</programlisting> - </example> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry project='dbus'><refentrytitle>dbus-daemon</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <ulink url="http://freedesktop.org/wiki/Software/dbus">D-Bus</ulink>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machinectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>wireshark</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> -</refentry> diff --git a/man/coredump.conf.xml b/man/coredump.conf.xml deleted file mode 100644 index 4f95680a3a..0000000000 --- a/man/coredump.conf.xml +++ /dev/null @@ -1,161 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="coredump.conf" conditional="ENABLE_COREDUMP" - xmlns:xi="http://www.w3.org/2001/XInclude"> - <refentryinfo> - <title>coredump.conf</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>coredump.conf</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>coredump.conf</refname> - <refname>coredump.conf.d</refname> - <refpurpose>Core dump storage configuration files</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/systemd/coredump.conf</filename></para> - <para><filename>/etc/systemd/coredump.conf.d/*.conf</filename></para> - <para><filename>/run/systemd/coredump.conf.d/*.conf</filename></para> - <para><filename>/usr/lib/systemd/coredump.conf.d/*.conf</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>These files configure the behavior of - <citerefentry><refentrytitle>systemd-coredump</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - a handler for core dumps invoked by the kernel. Whether <command>systemd-coredump</command> is used - is determined by the kernel's - <varname>kernel.core_pattern</varname> <citerefentry project='man-pages'><refentrytitle>sysctl</refentrytitle><manvolnum>8</manvolnum></citerefentry> - setting. See - <citerefentry><refentrytitle>systemd-coredump</refentrytitle><manvolnum>8</manvolnum></citerefentry> - and - <citerefentry project='man-pages'><refentrytitle>core</refentrytitle><manvolnum>5</manvolnum></citerefentry> - pages for the details.</para> - </refsect1> - - <xi:include href="standard-conf.xml" xpointer="main-conf" /> - - <refsect1> - <title>Options</title> - - <para>All options are configured in the - <literal>[Coredump]</literal> section:</para> - - <variablelist> - - <varlistentry> - <term><varname>Storage=</varname></term> - - <listitem><para>Controls where to store cores. One of - <literal>none</literal>, <literal>external</literal>, - <literal>journal</literal>, and <literal>both</literal>. When - <literal>none</literal>, the core dumps will be logged but not - stored permanently. When <literal>external</literal> (the - default), cores will be stored in <filename>/var/lib/systemd/coredump</filename>. - When <literal>journal</literal>, cores will be stored in - the journal and rotated following normal journal - rotation patterns. When <literal>both</literal>, cores - will be stored in both locations.</para> - - <para>When cores are stored in the journal, they might be - compressed following journal compression settings, see - <citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - When cores are stored externally, they will be compressed - by default, see below.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Compress=</varname></term> - - <listitem><para>Controls compression for external - storage. Takes a boolean argument, which defaults to - <literal>yes</literal>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>ProcessSizeMax=</varname></term> - - <listitem><para>The maximum size in bytes of a core - which will be processed. Core dumps exceeding this size - will be logged, but the backtrace will not be generated - and the core will not be stored.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ExternalSizeMax=</varname></term> - <term><varname>JournalSizeMax=</varname></term> - - <listitem><para>The maximum (uncompressed) size in bytes of a - core to be saved.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>MaxUse=</varname></term> - <term><varname>KeepFree=</varname></term> - - <listitem><para>Enforce limits on the disk space taken up by - externally stored core dumps. <option>MaxUse=</option> makes - sure that old core dumps are removed as soon as the total disk - space taken up by core dumps grows beyond this limit (defaults - to 10% of the total disk size). <option>KeepFree=</option> - controls how much disk space to keep free at least (defaults - to 15% of the total disk size). Note that the disk space used - by core dumps might temporarily exceed these limits while - core dumps are processed. Note that old core dumps are also - removed based on time via - <citerefentry><refentrytitle>systemd-tmpfiles</refentrytitle><manvolnum>8</manvolnum></citerefentry>. Set - either value to 0 to turn off size-based - clean-up.</para></listitem> - </varlistentry> - </variablelist> - - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>coredumpctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-tmpfiles</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/coredumpctl.xml b/man/coredumpctl.xml deleted file mode 100644 index abc245be5e..0000000000 --- a/man/coredumpctl.xml +++ /dev/null @@ -1,259 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="coredumpctl" conditional='ENABLE_COREDUMP' - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>coredumpctl</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>coredumpctl</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>coredumpctl</refname> - <refpurpose>Retrieve and process saved core dumps and metadata</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>coredumpctl</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="req">COMMAND</arg> - <arg choice="opt" rep="repeat">PID|COMM|EXE|MATCH</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>coredumpctl</command> is a tool that can be used to retrieve and process core - dumps and metadata which were saved by - <citerefentry><refentrytitle>systemd-coredump</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - </para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - - <varlistentry> - <term><option>--no-legend</option></term> - - <listitem><para>Do not print column headers.</para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="no-pager" /> - - <varlistentry> - <term><option>-1</option></term> - - <listitem><para>Show information of a single core dump only, instead of listing - all known core dumps.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-F</option> <replaceable>FIELD</replaceable></term> - <term><option>--field=</option><replaceable>FIELD</replaceable></term> - - <listitem><para>Print all possible data values the specified - field takes in matching core dump entries of the - journal.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-o</option> <replaceable>FILE</replaceable></term> - <term><option>--output=</option><replaceable>FILE</replaceable></term> - - <listitem><para>Write the core to <option>FILE</option>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-D</option> <replaceable>DIR</replaceable></term> - <term><option>--directory=</option><replaceable>DIR</replaceable></term> - - <listitem><para>Use the journal files in the specified <option>DIR</option>. - </para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>Commands</title> - - <para>The following commands are understood:</para> - - <variablelist> - <varlistentry> - <term><command>list</command></term> - - <listitem><para>List core dumps captured in the journal - matching specified characteristics. If no command is - specified, this is the implied default.</para> - - <para>It's worth noting that different restrictions apply to - data saved in the journal and core dump files saved in - <filename>/var/lib/systemd/coredump</filename>, see overview in - <citerefentry><refentrytitle>systemd-coredump</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - Thus it may very well happen that a particular core dump is still listed - in the journal while its corresponding core dump file has already been - removed.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>info</command></term> - - <listitem><para>Show detailed information about core dumps - captured in the journal.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>dump</command></term> - - <listitem><para>Extract the last core dump matching specified - characteristics. The core dump will be written on standard - output, unless an output file is specified with - <option>--output=</option>. </para></listitem> - </varlistentry> - - <varlistentry> - <term><command>gdb</command></term> - - <listitem><para>Invoke the GNU debugger on the last core dump - matching specified characteristics. </para></listitem> - </varlistentry> - - </variablelist> - - </refsect1> - - <refsect1> - <title>Matching</title> - - <para>A match can be:</para> - - <variablelist> - <varlistentry> - <term><replaceable>PID</replaceable></term> - - <listitem><para>Process ID of the - process that dumped - core. An integer.</para></listitem> - </varlistentry> - - <varlistentry> - <term><replaceable>COMM</replaceable></term> - - <listitem><para>Name of the executable (matches - <option>COREDUMP_COMM=</option>). Must not contain slashes. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><replaceable>EXE</replaceable></term> - - <listitem><para>Path to the executable (matches - <option>COREDUMP_EXE=</option>). Must contain at least one - slash. </para></listitem> - </varlistentry> - - <varlistentry> - <term><replaceable>MATCH</replaceable></term> - - <listitem><para>General journalctl predicates (see - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>). - Must contain an equal sign. </para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Exit status</title> - <para>On success, 0 is returned; otherwise, a non-zero failure - code is returned. Not finding any matching core dumps is treated as - failure. - </para> - </refsect1> - - <refsect1> - <title>Examples</title> - - <example> - <title>List all the core dumps of a program named foo</title> - - <programlisting># coredumpctl list foo</programlisting> - </example> - - <example> - <title>Invoke gdb on the last core dump</title> - - <programlisting># coredumpctl gdb</programlisting> - </example> - - <example> - <title>Show information about a process that dumped core, - matching by its PID 6654</title> - - <programlisting># coredumpctl info 6654</programlisting> - </example> - - <example> - <title>Extract the last core dump of /usr/bin/bar to a file named - <filename noindex="true">bar.coredump</filename></title> - - <programlisting># coredumpctl -o bar.coredump dump /usr/bin/bar</programlisting> - </example> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd-coredump</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>coredump.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>gdb</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/crypttab.xml b/man/crypttab.xml deleted file mode 100644 index 1de834a045..0000000000 --- a/man/crypttab.xml +++ /dev/null @@ -1,416 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. - - This is based on crypttab(5) from Fedora's initscripts package, which in - turn is based on Debian's version. - - The Red Hat version has been written by Miloslav Trmac <mitr@redhat.com>. - ---> -<refentry id="crypttab" conditional='HAVE_LIBCRYPTSETUP'> - - <refentryinfo> - <title>crypttab</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Documentation</contrib> - <firstname>Miloslav</firstname> - <surname>Trmac</surname> - <email>mitr@redhat.com</email> - </author> - <author> - <contrib>Documentation</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>crypttab</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>crypttab</refname> - <refpurpose>Configuration for encrypted block devices</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/crypttab</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>The <filename>/etc/crypttab</filename> file describes - encrypted block devices that are set up during system boot.</para> - - <para>Empty lines and lines starting with the <literal>#</literal> - character are ignored. Each of the remaining lines describes one - encrypted block device, fields on the line are delimited by white - space. The first two fields are mandatory, the remaining two are - optional.</para> - - <para>Setting up encrypted block devices using this file supports - three encryption modes: LUKS, TrueCrypt and plain. See - <citerefentry project='die-net'><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for more information about each mode. When no mode is specified in - the options field and the block device contains a LUKS signature, - it is opened as a LUKS device; otherwise, it is assumed to be in - raw dm-crypt (plain mode) format.</para> - - <para>The first field contains the name of the resulting encrypted - block device; the device is set up within - <filename>/dev/mapper/</filename>.</para> - - <para>The second field contains a path to the underlying block - device or file, or a specification of a block device via - <literal>UUID=</literal> followed by the UUID.</para> - - <para>The third field specifies the encryption password. If the - field is not present or the password is set to - <literal>none</literal> or <literal>-</literal>, the password has - to be manually entered during system boot. Otherwise, the field is - interpreted as a absolute path to a file containing the encryption - password. For swap encryption, <filename>/dev/urandom</filename> - or the hardware device <filename>/dev/hw_random</filename> can be - used as the password file; using <filename>/dev/random</filename> - may prevent boot completion if the system does not have enough - entropy to generate a truly random encryption key.</para> - - <para>The fourth field, if present, is a comma-delimited list of - options. The following options are recognized:</para> - - <variablelist class='fstab-options'> - - <varlistentry> - <term><option>discard</option></term> - - <listitem><para>Allow discard requests to be passed through - the encrypted block device. This improves performance on SSD - storage but has security implications.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>cipher=</option></term> - - <listitem><para>Specifies the cipher to use. See - <citerefentry project='die-net'><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for possible values and the default value of this option. A - cipher with unpredictable IV values, such as - <literal>aes-cbc-essiv:sha256</literal>, is - recommended.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>hash=</option></term> - - <listitem><para>Specifies the hash to use for password - hashing. See - <citerefentry project='die-net'><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for possible values and the default value of this - option.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>header=</option></term> - - <listitem><para>Use a detached (separated) metadata device or - file where the LUKS header is stored. This option is only - relevant for LUKS devices. See - <citerefentry project='die-net'><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for possible values and the default value of this - option.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>offset=</option></term> - - <listitem><para>Start offset in the backend device, in 512-byte sectors. - This option is only relevant for plain devices. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>skip=</option></term> - - <listitem><para>How many 512-byte sectors of the encrypted data to skip - at the beginning. This is different from the <option>--offset</option> - option with respect to the sector numbers used in initialization vector - (IV) calculation. Using <option>--offset</option> will shift the IV - calculation by the same negative amount. Hence, if <option>--offset n</option> is given, - sector n will get a sector number of 0 for the IV calculation. - Using <option>--skip</option> causes sector n to also be the first - sector of the mapped device, but with its number for IV generation being n.</para> - - <para>This option is only relevant for plain devices.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>keyfile-offset=</option></term> - - <listitem><para>Specifies the number of bytes to skip at the - start of the key file. See - <citerefentry project='die-net'><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for possible values and the default value of this - option.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>keyfile-size=</option></term> - - <listitem><para>Specifies the maximum number of bytes to read - from the key file. See - <citerefentry project='die-net'><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for possible values and the default value of this option. This - option is ignored in plain encryption mode, as the key file - size is then given by the key size.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>key-slot=</option></term> - - <listitem><para>Specifies the key slot to compare the - passphrase or key against. If the key slot does not match the - given passphrase or key, but another would, the setup of the - device will fail regardless. This option implies - <option>luks</option>. See - <citerefentry project='die-net'><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for possible values. The default is to try all key slots in - sequential order.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>luks</option></term> - - <listitem><para>Force LUKS mode. When this mode is used, the - following options are ignored since they are provided by the - LUKS header on the device: <option>cipher=</option>, - <option>hash=</option>, - <option>size=</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>noauto</option></term> - - <listitem><para>This device will not be automatically unlocked - on boot.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>nofail</option></term> - - <listitem><para>The system will not wait for the device to - show up and be unlocked at boot, and not fail the boot if it - does not show up.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>plain</option></term> - - <listitem><para>Force plain encryption mode.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>read-only</option></term><term><option>readonly</option></term> - - <listitem><para>Set up the encrypted block device in read-only - mode.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>size=</option></term> - - <listitem><para>Specifies the key size in bits. See - <citerefentry project='die-net'><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for possible values and the default value of this - option.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>swap</option></term> - - <listitem><para>The encrypted block device will be used as a - swap device, and will be formatted accordingly after setting - up the encrypted block device, with - <citerefentry project='man-pages'><refentrytitle>mkswap</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - This option implies <option>plain</option>.</para> - - <para>WARNING: Using the <option>swap</option> option will - destroy the contents of the named partition during every boot, - so make sure the underlying block device is specified - correctly.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>tcrypt</option></term> - - <listitem><para>Use TrueCrypt encryption mode. When this mode - is used, the following options are ignored since they are - provided by the TrueCrypt header on the device or do not - apply: - <option>cipher=</option>, - <option>hash=</option>, - <option>keyfile-offset=</option>, - <option>keyfile-size=</option>, - <option>size=</option>.</para> - - <para>When this mode is used, the passphrase is read from the - key file given in the third field. Only the first line of this - file is read, excluding the new line character.</para> - - <para>Note that the TrueCrypt format uses both passphrase and - key files to derive a password for the volume. Therefore, the - passphrase and all key files need to be provided. Use - <option>tcrypt-keyfile=</option> to provide the absolute path - to all key files. When using an empty passphrase in - combination with one or more key files, use - <literal>/dev/null</literal> as the password file in the third - field.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>tcrypt-hidden</option></term> - - <listitem><para>Use the hidden TrueCrypt volume. This option - implies <option>tcrypt</option>.</para> - - <para>This will map the hidden volume that is inside of the - volume provided in the second field. Please note that there is - no protection for the hidden volume if the outer volume is - mounted instead. See - <citerefentry project='die-net'><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for more information on this limitation.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>tcrypt-keyfile=</option></term> - - <listitem><para>Specifies the absolute path to a key file to - use for a TrueCrypt volume. This implies - <option>tcrypt</option> and can be used more than once to - provide several key files.</para> - - <para>See the entry for <option>tcrypt</option> on the - behavior of the passphrase and key files when using TrueCrypt - encryption mode.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>tcrypt-system</option></term> - - <listitem><para>Use TrueCrypt in system encryption mode. This - option implies <option>tcrypt</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>timeout=</option></term> - - <listitem><para>Specifies the timeout for querying for a - password. If no unit is specified, seconds is used. Supported - units are s, ms, us, min, h, d. A timeout of 0 waits - indefinitely (which is the default).</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>x-systemd.device-timeout=</option></term> - - <listitem><para>Specifies how long systemd should wait for a - device to show up before giving up on the entry. The argument - is a time in seconds or explicitly specified units of - <literal>s</literal>, - <literal>min</literal>, - <literal>h</literal>, - <literal>ms</literal>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>tmp</option></term> - - <listitem><para>The encrypted block device will be prepared - for using it as <filename>/tmp</filename>; it will be - formatted using - <citerefentry project='man-pages'><refentrytitle>mke2fs</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - This option implies <option>plain</option>.</para> - - <para>WARNING: Using the <option>tmp</option> option will - destroy the contents of the named partition during every boot, - so make sure the underlying block device is specified - correctly.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>tries=</option></term> - - <listitem><para>Specifies the maximum number of times the user - is queried for a password. The default is 3. If set to 0, the - user is queried for a password indefinitely.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>verify</option></term> - - <listitem><para> If the encryption password is read from - console, it has to be entered twice to prevent - typos.</para></listitem> - </varlistentry> - - </variablelist> - - <para>At early boot and when the system manager configuration is - reloaded, this file is translated into native systemd units by - <citerefentry><refentrytitle>systemd-cryptsetup-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>Example</title> - <example> - <title>/etc/crypttab example</title> - <para>Set up four encrypted block devices. One using LUKS for - normal storage, another one for usage as a swap device and two - TrueCrypt volumes.</para> - - <programlisting>luks UUID=2505567a-9e27-4efe-a4d5-15ad146c258b -swap /dev/sda7 /dev/urandom swap -truecrypt /dev/sda2 /etc/container_password tcrypt -hidden /mnt/tc_hidden /dev/null tcrypt-hidden,tcrypt-keyfile=/etc/keyfile</programlisting> - </example> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-cryptsetup@.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-cryptsetup-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>mkswap</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>mke2fs</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/daemon.xml b/man/daemon.xml deleted file mode 100644 index a649749683..0000000000 --- a/man/daemon.xml +++ /dev/null @@ -1,763 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="daemon"> - - <refentryinfo> - <title>daemon</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>daemon</refentrytitle> - <manvolnum>7</manvolnum> - </refmeta> - - <refnamediv> - <refname>daemon</refname> - <refpurpose>Writing and packaging system daemons</refpurpose> - </refnamediv> - - <refsect1> - <title>Description</title> - - <para>A daemon is a service process that runs in the background - and supervises the system or provides functionality to other - processes. Traditionally, daemons are implemented following a - scheme originating in SysV Unix. Modern daemons should follow a - simpler yet more powerful scheme (here called "new-style" - daemons), as implemented by - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - This manual page covers both schemes, and in particular includes - recommendations for daemons that shall be included in the systemd - init system.</para> - - <refsect2> - <title>SysV Daemons</title> - - <para>When a traditional SysV daemon starts, it should execute - the following steps as part of the initialization. Note that - these steps are unnecessary for new-style daemons (see below), - and should only be implemented if compatibility with SysV is - essential.</para> - - <orderedlist> - <listitem><para>Close all open file descriptors except - standard input, output, and error (i.e. the first three file - descriptors 0, 1, 2). This ensures that no accidentally passed - file descriptor stays around in the daemon process. On Linux, - this is best implemented by iterating through - <filename>/proc/self/fd</filename>, with a fallback of - iterating from file descriptor 3 to the value returned by - <function>getrlimit()</function> for - <constant>RLIMIT_NOFILE</constant>. </para></listitem> - - <listitem><para>Reset all signal handlers to their default. - This is best done by iterating through the available signals - up to the limit of <constant>_NSIG</constant> and resetting - them to <constant>SIG_DFL</constant>.</para></listitem> - - <listitem><para>Reset the signal mask - using - <function>sigprocmask()</function>.</para></listitem> - - <listitem><para>Sanitize the environment block, removing or - resetting environment variables that might negatively impact - daemon runtime.</para></listitem> - - <listitem><para>Call <function>fork()</function>, to create a - background process.</para></listitem> - - <listitem><para>In the child, call - <function>setsid()</function> to detach from any terminal and - create an independent session.</para></listitem> - - <listitem><para>In the child, call <function>fork()</function> - again, to ensure that the daemon can never re-acquire a - terminal again.</para></listitem> - - <listitem><para>Call <function>exit()</function> in the first - child, so that only the second child (the actual daemon - process) stays around. This ensures that the daemon process is - re-parented to init/PID 1, as all daemons should - be.</para></listitem> - - <listitem><para>In the daemon process, connect - <filename>/dev/null</filename> to standard input, output, and - error.</para></listitem> - - <listitem><para>In the daemon process, reset the umask to 0, - so that the file modes passed to <function>open()</function>, - <function>mkdir()</function> and suchlike directly control the - access mode of the created files and - directories.</para></listitem> - - <listitem><para>In the daemon process, change the current - directory to the root directory (/), in order to avoid that - the daemon involuntarily blocks mount points from being - unmounted.</para></listitem> - - <listitem><para>In the daemon process, write the daemon PID - (as returned by <function>getpid()</function>) to a PID file, - for example <filename>/run/foobar.pid</filename> (for a - hypothetical daemon "foobar") to ensure that the daemon cannot - be started more than once. This must be implemented in - race-free fashion so that the PID file is only updated when it - is verified at the same time that the PID previously stored in - the PID file no longer exists or belongs to a foreign - process.</para></listitem> - - <listitem><para>In the daemon process, drop privileges, if - possible and applicable.</para></listitem> - - <listitem><para>From the daemon process, notify the original - process started that initialization is complete. This can be - implemented via an unnamed pipe or similar communication - channel that is created before the first - <function>fork()</function> and hence available in both the - original and the daemon process.</para></listitem> - - <listitem><para>Call <function>exit()</function> in the - original process. The process that invoked the daemon must be - able to rely on that this <function>exit()</function> happens - after initialization is complete and all external - communication channels are established and - accessible.</para></listitem> - </orderedlist> - - <para>The BSD <function>daemon()</function> function should not - be used, as it implements only a subset of these steps.</para> - - <para>A daemon that needs to provide compatibility with SysV - systems should implement the scheme pointed out above. However, - it is recommended to make this behavior optional and - configurable via a command line argument to ease debugging as - well as to simplify integration into systems using - systemd.</para> - </refsect2> - - <refsect2> - <title>New-Style Daemons</title> - - <para>Modern services for GNU/Linux should be implemented as - new-style daemons. This makes it easier to supervise and control - them at runtime and simplifies their implementation.</para> - - <para>For developing a new-style daemon, none of the - initialization steps recommended for SysV daemons need to be - implemented. New-style init systems such as systemd make all of - them redundant. Moreover, since some of these steps interfere - with process monitoring, file descriptor passing and other - functionality of the init system, it is recommended not to - execute them when run as new-style service.</para> - - <para>Note that new-style init systems guarantee execution of daemon processes in a clean process context: it is - guaranteed that the environment block is sanitized, that the signal handlers and mask is reset and that no - left-over file descriptors are passed. Daemons will be executed in their own session, with standard input - connected to <filename>/dev/null</filename> and standard output/error connected to the - <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - logging service, unless otherwise configured. The umask is reset. - </para> - - <para>It is recommended for new-style daemons to implement the - following:</para> - - <orderedlist> - <listitem><para>If <constant>SIGTERM</constant> is received, - shut down the daemon and exit cleanly.</para></listitem> - - <listitem><para>If <constant>SIGHUP</constant> is received, - reload the configuration files, if this - applies.</para></listitem> - - <listitem><para>Provide a correct exit code from the main - daemon process, as this is used by the init system to detect - service errors and problems. It is recommended to follow the - exit code scheme as defined in the <ulink - url="http://refspecs.linuxbase.org/LSB_3.1.1/LSB-Core-generic/LSB-Core-generic/iniscrptact.html">LSB - recommendations for SysV init - scripts</ulink>.</para></listitem> - - <listitem><para>If possible and applicable, expose the - daemon's control interface via the D-Bus IPC system and grab a - bus name as last step of initialization.</para></listitem> - - <listitem><para>For integration in systemd, provide a - <filename>.service</filename> unit file that carries - information about starting, stopping and otherwise maintaining - the daemon. See - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para></listitem> - - <listitem><para>As much as possible, rely on the init system's - functionality to limit the access of the daemon to files, - services and other resources, i.e. in the case of systemd, - rely on systemd's resource limit control instead of - implementing your own, rely on systemd's privilege dropping - code instead of implementing it in the daemon, and similar. - See - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for the available controls.</para></listitem> - - <listitem><para>If D-Bus is used, make your daemon - bus-activatable by supplying a D-Bus service activation - configuration file. This has multiple advantages: your daemon - may be started lazily on-demand; it may be started in parallel - to other daemons requiring it — which maximizes - parallelization and boot-up speed; your daemon can be - restarted on failure without losing any bus requests, as the - bus queues requests for activatable services. See below for - details.</para></listitem> - - <listitem><para>If your daemon provides services to other - local processes or remote clients via a socket, it should be - made socket-activatable following the scheme pointed out - below. Like D-Bus activation, this enables on-demand starting - of services as well as it allows improved parallelization of - service start-up. Also, for state-less protocols (such as - syslog, DNS), a daemon implementing socket-based activation - can be restarted without losing a single request. See below - for details.</para></listitem> - - <listitem><para>If applicable, a daemon should notify the init - system about startup completion or status updates via the - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry> - interface.</para></listitem> - - <listitem><para>Instead of using the - <function>syslog()</function> call to log directly to the - system syslog service, a new-style daemon may choose to simply - log to standard error via <function>fprintf()</function>, - which is then forwarded to syslog by the init system. If log - levels are necessary, these can be encoded by prefixing - individual log lines with strings like - <literal><4></literal> (for log level 4 "WARNING" in the - syslog priority scheme), following a similar style as the - Linux kernel's <function>printk()</function> level system. For - details, see - <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem> - - </orderedlist> - - <para>These recommendations are similar but not identical to the - <ulink - url="https://developer.apple.com/library/mac/documentation/MacOSX/Conceptual/BPSystemStartup/Chapters/CreatingLaunchdJobs.html">Apple - MacOS X Daemon Requirements</ulink>.</para> - </refsect2> - - </refsect1> - <refsect1> - <title>Activation</title> - - <para>New-style init systems provide multiple additional - mechanisms to activate services, as detailed below. It is common - that services are configured to be activated via more than one - mechanism at the same time. An example for systemd: - <filename>bluetoothd.service</filename> might get activated either - when Bluetooth hardware is plugged in, or when an application - accesses its programming interfaces via D-Bus. Or, a print server - daemon might get activated when traffic arrives at an IPP port, or - when a printer is plugged in, or when a file is queued in the - printer spool directory. Even for services that are intended to be - started on system bootup unconditionally, it is a good idea to - implement some of the various activation schemes outlined below, - in order to maximize parallelization. If a daemon implements a - D-Bus service or listening socket, implementing the full bus and - socket activation scheme allows starting of the daemon with its - clients in parallel (which speeds up boot-up), since all its - communication channels are established already, and no request is - lost because client requests will be queued by the bus system (in - case of D-Bus) or the kernel (in case of sockets) until the - activation is completed.</para> - - <refsect2> - <title>Activation on Boot</title> - - <para>Old-style daemons are usually activated exclusively on - boot (and manually by the administrator) via SysV init scripts, - as detailed in the <ulink - url="http://refspecs.linuxbase.org/LSB_3.1.1/LSB-Core-generic/LSB-Core-generic/iniscrptact.html">LSB - Linux Standard Base Core Specification</ulink>. This method of - activation is supported ubiquitously on GNU/Linux init systems, both - old-style and new-style systems. Among other issues, SysV init - scripts have the disadvantage of involving shell scripts in the - boot process. New-style init systems generally employ updated - versions of activation, both during boot-up and during runtime - and using more minimal service description files.</para> - - <para>In systemd, if the developer or administrator wants to - make sure that a service or other unit is activated - automatically on boot, it is recommended to place a symlink to - the unit file in the <filename>.wants/</filename> directory of - either <filename>multi-user.target</filename> or - <filename>graphical.target</filename>, which are normally used - as boot targets at system startup. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details about the <filename>.wants/</filename> directories, - and - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details about the two boot targets.</para> - - </refsect2> - - <refsect2> - <title>Socket-Based Activation</title> - - <para>In order to maximize the possible parallelization and - robustness and simplify configuration and development, it is - recommended for all new-style daemons that communicate via - listening sockets to employ socket-based activation. In a - socket-based activation scheme, the creation and binding of the - listening socket as primary communication channel of daemons to - local (and sometimes remote) clients is moved out of the daemon - code and into the init system. Based on per-daemon - configuration, the init system installs the sockets and then - hands them off to the spawned process as soon as the respective - daemon is to be started. Optionally, activation of the service - can be delayed until the first inbound traffic arrives at the - socket to implement on-demand activation of daemons. However, - the primary advantage of this scheme is that all providers and - all consumers of the sockets can be started in parallel as soon - as all sockets are established. In addition to that, daemons can - be restarted with losing only a minimal number of client - transactions, or even any client request at all (the latter is - particularly true for state-less protocols, such as DNS or - syslog), because the socket stays bound and accessible during - the restart, and all requests are queued while the daemon cannot - process them.</para> - - <para>New-style daemons which support socket activation must be - able to receive their sockets from the init system instead of - creating and binding them themselves. For details about the - programming interfaces for this scheme provided by systemd, see - <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - For details about porting existing daemons to socket-based - activation, see below. With minimal effort, it is possible to - implement socket-based activation in addition to traditional - internal socket creation in the same codebase in order to - support both new-style and old-style init systems from the same - daemon binary.</para> - - <para>systemd implements socket-based activation via - <filename>.socket</filename> units, which are described in - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - When configuring socket units for socket-based activation, it is - essential that all listening sockets are pulled in by the - special target unit <filename>sockets.target</filename>. It is - recommended to place a - <varname>WantedBy=sockets.target</varname> directive in the - <literal>[Install]</literal> section to automatically add such a - dependency on installation of a socket unit. Unless - <varname>DefaultDependencies=no</varname> is set, the necessary - ordering dependencies are implicitly created for all socket - units. For more information about - <filename>sockets.target</filename>, see - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>. - It is not necessary or recommended to place any additional - dependencies on socket units (for example from - <filename>multi-user.target</filename> or suchlike) when one is - installed in <filename>sockets.target</filename>.</para> - </refsect2> - - <refsect2> - <title>Bus-Based Activation</title> - - <para>When the D-Bus IPC system is used for communication with - clients, new-style daemons should employ bus activation so that - they are automatically activated when a client application - accesses their IPC interfaces. This is configured in D-Bus - service files (not to be confused with systemd service unit - files!). To ensure that D-Bus uses systemd to start-up and - maintain the daemon, use the <varname>SystemdService=</varname> - directive in these service files to configure the matching - systemd service for a D-Bus service. e.g.: For a D-Bus service - whose D-Bus activation file is named - <filename>org.freedesktop.RealtimeKit.service</filename>, make - sure to set - <varname>SystemdService=rtkit-daemon.service</varname> in that - file to bind it to the systemd service - <filename>rtkit-daemon.service</filename>. This is needed to - make sure that the daemon is started in a race-free fashion when - activated via multiple mechanisms simultaneously.</para> - </refsect2> - - <refsect2> - <title>Device-Based Activation</title> - - <para>Often, daemons that manage a particular type of hardware - should be activated only when the hardware of the respective - kind is plugged in or otherwise becomes available. In a - new-style init system, it is possible to bind activation to - hardware plug/unplug events. In systemd, kernel devices - appearing in the sysfs/udev device tree can be exposed as units - if they are tagged with the string <literal>systemd</literal>. - Like any other kind of unit, they may then pull in other units - when activated (i.e. plugged in) and thus implement device-based - activation. systemd dependencies may be encoded in the udev - database via the <varname>SYSTEMD_WANTS=</varname> property. See - <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. Often, it is nicer to pull in services from devices - only indirectly via dedicated targets. Example: Instead of - pulling in <filename>bluetoothd.service</filename> from all the - various bluetooth dongles and other hardware available, pull in - bluetooth.target from them and - <filename>bluetoothd.service</filename> from that target. This - provides for nicer abstraction and gives administrators the - option to enable <filename>bluetoothd.service</filename> via - controlling a <filename>bluetooth.target.wants/</filename> - symlink uniformly with a command like <command>enable</command> - of - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - instead of manipulating the udev ruleset.</para> - </refsect2> - - <refsect2> - <title>Path-Based Activation</title> - - <para>Often, runtime of daemons processing spool files or - directories (such as a printing system) can be delayed until - these file system objects change state, or become non-empty. - New-style init systems provide a way to bind service activation - to file system changes. systemd implements this scheme via - path-based activation configured in <filename>.path</filename> - units, as outlined in - <citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </refsect2> - - <refsect2> - <title>Timer-Based Activation</title> - - <para>Some daemons that implement clean-up jobs that are - intended to be executed in regular intervals benefit from - timer-based activation. In systemd, this is implemented via - <filename>.timer</filename> units, as described in - <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </refsect2> - - <refsect2> - <title>Other Forms of Activation</title> - - <para>Other forms of activation have been suggested and - implemented in some systems. However, there are often simpler or - better alternatives, or they can be put together of combinations - of the schemes above. Example: Sometimes, it appears useful to - start daemons or <filename>.socket</filename> units when a - specific IP address is configured on a network interface, - because network sockets shall be bound to the address. However, - an alternative to implement this is by utilizing the Linux - <constant>IP_FREEBIND</constant> socket option, as accessible - via <varname>FreeBind=yes</varname> in systemd socket files (see - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details). This option, when enabled, allows sockets to be - bound to a non-local, not configured IP address, and hence - allows bindings to a particular IP address before it actually - becomes available, making such an explicit dependency to the - configured address redundant. Another often suggested trigger - for service activation is low system load. However, here too, a - more convincing approach might be to make proper use of features - of the operating system, in particular, the CPU or I/O scheduler - of Linux. Instead of scheduling jobs from userspace based on - monitoring the OS scheduler, it is advisable to leave the - scheduling of processes to the OS scheduler itself. systemd - provides fine-grained access to the CPU and I/O schedulers. If a - process executed by the init system shall not negatively impact - the amount of CPU or I/O bandwidth available to other processes, - it should be configured with - <varname>CPUSchedulingPolicy=idle</varname> and/or - <varname>IOSchedulingClass=idle</varname>. Optionally, this may - be combined with timer-based activation to schedule background - jobs during runtime and with minimal impact on the system, and - remove it from the boot phase itself.</para> - </refsect2> - - </refsect1> - <refsect1> - <title>Integration with Systemd</title> - - <refsect2> - <title>Writing Systemd Unit Files</title> - - <para>When writing systemd unit files, it is recommended to - consider the following suggestions:</para> - - <orderedlist> - <listitem><para>If possible, do not use the - <varname>Type=forking</varname> setting in service files. But - if you do, make sure to set the PID file path using - <varname>PIDFile=</varname>. See - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para></listitem> - - <listitem><para>If your daemon registers a D-Bus name on the - bus, make sure to use <varname>Type=dbus</varname> in the - service file if possible.</para></listitem> - - <listitem><para>Make sure to set a good human-readable - description string with - <varname>Description=</varname>.</para></listitem> - - <listitem><para>Do not disable - <varname>DefaultDependencies=</varname>, unless you really - know what you do and your unit is involved in early boot or - late system shutdown.</para></listitem> - - <listitem><para>Normally, little if any dependencies should - need to be defined explicitly. However, if you do configure - explicit dependencies, only refer to unit names listed on - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry> - or names introduced by your own package to keep the unit file - operating system-independent.</para></listitem> - - <listitem><para>Make sure to include an - <literal>[Install]</literal> section including installation - information for the unit file. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. To activate your service on boot, make sure to - add a <varname>WantedBy=multi-user.target</varname> or - <varname>WantedBy=graphical.target</varname> directive. To - activate your socket on boot, make sure to add - <varname>WantedBy=sockets.target</varname>. Usually, you also - want to make sure that when your service is installed, your - socket is installed too, hence add - <varname>Also=foo.socket</varname> in your service file - <filename>foo.service</filename>, for a hypothetical program - <filename>foo</filename>.</para></listitem> - - </orderedlist> - </refsect2> - - <refsect2> - <title>Installing Systemd Service Files</title> - - <para>At the build installation time (e.g. <command>make - install</command> during package build), packages are - recommended to install their systemd unit files in the directory - returned by <command>pkg-config systemd - --variable=systemdsystemunitdir</command> (for system services) - or <command>pkg-config systemd - --variable=systemduserunitdir</command> (for user services). - This will make the services available in the system on explicit - request but not activate them automatically during boot. - Optionally, during package installation (e.g. <command>rpm - -i</command> by the administrator), symlinks should be created - in the systemd configuration directories via the - <command>enable</command> command of the - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - tool to activate them automatically on boot.</para> - - <para>Packages using - <citerefentry project='die-net'><refentrytitle>autoconf</refentrytitle><manvolnum>1</manvolnum></citerefentry> - are recommended to use a configure script - excerpt like the following to determine the - unit installation path during source - configuration:</para> - - <programlisting>PKG_PROG_PKG_CONFIG -AC_ARG_WITH([systemdsystemunitdir], - [AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [Directory for systemd service files])],, - [with_systemdsystemunitdir=auto]) -AS_IF([test "x$with_systemdsystemunitdir" = "xyes" -o "x$with_systemdsystemunitdir" = "xauto"], [ - def_systemdsystemunitdir=$($PKG_CONFIG --variable=systemdsystemunitdir systemd) - - AS_IF([test "x$def_systemdsystemunitdir" = "x"], - [AS_IF([test "x$with_systemdsystemunitdir" = "xyes"], - [AC_MSG_ERROR([systemd support requested but pkg-config unable to query systemd package])]) - with_systemdsystemunitdir=no], - [with_systemdsystemunitdir="$def_systemdsystemunitdir"])]) -AS_IF([test "x$with_systemdsystemunitdir" != "xno"], - [AC_SUBST([systemdsystemunitdir], [$with_systemdsystemunitdir])]) -AM_CONDITIONAL([HAVE_SYSTEMD], [test "x$with_systemdsystemunitdir" != "xno"])</programlisting> - - <para>This snippet allows automatic - installation of the unit files on systemd - machines, and optionally allows their - installation even on machines lacking - systemd. (Modification of this snippet for the - user unit directory is left as an exercise for the - reader.)</para> - - <para>Additionally, to ensure that - <command>make distcheck</command> continues to - work, it is recommended to add the following - to the top-level <filename>Makefile.am</filename> - file in - <citerefentry project='die-net'><refentrytitle>automake</refentrytitle><manvolnum>1</manvolnum></citerefentry>-based - projects:</para> - - <programlisting>DISTCHECK_CONFIGURE_FLAGS = \ - --with-systemdsystemunitdir=$$dc_install_base/$(systemdsystemunitdir)</programlisting> - - <para>Finally, unit files should be installed in the system with an automake excerpt like the following:</para> - - <programlisting>if HAVE_SYSTEMD -systemdsystemunit_DATA = \ - foobar.socket \ - foobar.service -endif</programlisting> - - <para>In the - <citerefentry project='die-net'><refentrytitle>rpm</refentrytitle><manvolnum>8</manvolnum></citerefentry> - <filename>.spec</filename> file, use snippets like the following - to enable/disable the service during - installation/deinstallation. This makes use of the RPM macros - shipped along systemd. Consult the packaging guidelines of your - distribution for details and the equivalent for other package - managers.</para> - - <para>At the top of the file:</para> - - <programlisting>BuildRequires: systemd -%{?systemd_requires}</programlisting> - - <para>And as scriptlets, further down:</para> - - <programlisting>%post -%systemd_post foobar.service foobar.socket - -%preun -%systemd_preun foobar.service foobar.socket - -%postun -%systemd_postun</programlisting> - - <para>If the service shall be restarted during upgrades, replace - the <literal>%postun</literal> scriptlet above with the - following:</para> - - <programlisting>%postun -%systemd_postun_with_restart foobar.service</programlisting> - - <para>Note that <literal>%systemd_post</literal> and - <literal>%systemd_preun</literal> expect the names of all units - that are installed/removed as arguments, separated by spaces. - <literal>%systemd_postun</literal> expects no arguments. - <literal>%systemd_postun_with_restart</literal> expects the - units to restart as arguments.</para> - - <para>To facilitate upgrades from a package version that shipped - only SysV init scripts to a package version that ships both a - SysV init script and a native systemd service file, use a - fragment like the following:</para> - - <programlisting>%triggerun -- foobar < 0.47.11-1 -if /sbin/chkconfig --level 5 foobar ; then - /bin/systemctl --no-reload enable foobar.service foobar.socket >/dev/null 2>&1 || : -fi</programlisting> - - <para>Where 0.47.11-1 is the first package version that includes - the native unit file. This fragment will ensure that the first - time the unit file is installed, it will be enabled if and only - if the SysV init script is enabled, thus making sure that the - enable status is not changed. Note that - <command>chkconfig</command> is a command specific to Fedora - which can be used to check whether a SysV init script is - enabled. Other operating systems will have to use different - commands here.</para> - </refsect2> - </refsect1> - - <refsect1> - <title>Porting Existing Daemons</title> - - <para>Since new-style init systems such as systemd are compatible - with traditional SysV init systems, it is not strictly necessary - to port existing daemons to the new style. However, doing so - offers additional functionality to the daemons as well as - simplifying integration into new-style init systems.</para> - - <para>To port an existing SysV compatible daemon, the following - steps are recommended:</para> - - <orderedlist> - <listitem><para>If not already implemented, add an optional - command line switch to the daemon to disable daemonization. This - is useful not only for using the daemon in new-style init - systems, but also to ease debugging.</para></listitem> - - <listitem><para>If the daemon offers interfaces to other - software running on the local system via local - <constant>AF_UNIX</constant> sockets, consider implementing - socket-based activation (see above). Usually, a minimal patch is - sufficient to implement this: Extend the socket creation in the - daemon code so that - <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry> - is checked for already passed sockets first. If sockets are - passed (i.e. when <function>sd_listen_fds()</function> returns a - positive value), skip the socket creation step and use the - passed sockets. Secondly, ensure that the file system socket - nodes for local <constant>AF_UNIX</constant> sockets used in the - socket-based activation are not removed when the daemon shuts - down, if sockets have been passed. Third, if the daemon normally - closes all remaining open file descriptors as part of its - initialization, the sockets passed from the init system must be - spared. Since new-style init systems guarantee that no left-over - file descriptors are passed to executed processes, it might be a - good choice to simply skip the closing of all remaining open - file descriptors if sockets are passed.</para></listitem> - - <listitem><para>Write and install a systemd unit file for the - service (and the sockets if socket-based activation is used, as - well as a path unit file, if the daemon processes a spool - directory), see above for details.</para></listitem> - - <listitem><para>If the daemon exposes interfaces via D-Bus, - write and install a D-Bus activation file for the service, see - above for details.</para></listitem> - </orderedlist> - </refsect1> - - <refsect1> - <title>Placing Daemon Data</title> - - <para>It is recommended to follow the general guidelines for - placing package files, as discussed in - <citerefentry><refentrytitle>file-hierarchy</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>file-hierarchy</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/file-hierarchy.xml b/man/file-hierarchy.xml deleted file mode 100644 index 538a592f8d..0000000000 --- a/man/file-hierarchy.xml +++ /dev/null @@ -1,815 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="file-hierarchy"> - - <refentryinfo> - <title>file-hierarchy</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>file-hierarchy</refentrytitle> - <manvolnum>7</manvolnum> - </refmeta> - - <refnamediv> - <refname>file-hierarchy</refname> - <refpurpose>File system hierarchy overview</refpurpose> - </refnamediv> - - <refsect1> - <title>Description</title> - - <para>Operating systems using the - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - system and service manager are organized based on a file system - hierarchy inspired by UNIX, more specifically the hierarchy - described in the <ulink - url="http://refspecs.linuxfoundation.org/FHS_2.3/fhs-2.3.html">File - System Hierarchy</ulink> specification and - <citerefentry project='man-pages'><refentrytitle>hier</refentrytitle><manvolnum>7</manvolnum></citerefentry>. - This manual page describes a more minimal, modernized subset of - these specifications that defines more strictly the suggestions - and restrictions systemd makes on the file system - hierarchy.</para> - - <para>Many of the paths described here can be queried - with the - <citerefentry><refentrytitle>systemd-path</refentrytitle><manvolnum>1</manvolnum></citerefentry> - tool.</para> - </refsect1> - - <refsect1> - <title>General Structure</title> - - <variablelist> - <varlistentry> - <term><filename>/</filename></term> - <listitem><para>The file system root. Usually writable, but - this is not required. Possibly a temporary file system - (<literal>tmpfs</literal>). Not shared with other hosts - (unless read-only). </para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/boot</filename></term> - <listitem><para>The boot partition used for bringing up the - system. On EFI systems, this is possibly the EFI System - Partition, also see - <citerefentry><refentrytitle>systemd-gpt-auto-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - This directory is usually strictly local to the host, and - should be considered read-only, except when a new kernel or - boot loader is installed. This directory only exists on - systems that run on physical or emulated hardware that - requires boot loaders.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/etc</filename></term> - <listitem><para>System-specific configuration. This directory - may or may not be read-only. Frequently, this directory is - pre-populated with vendor-supplied configuration files, but - applications should not make assumptions about this directory - being fully populated or populated at all, and should fall - back to defaults if configuration is - missing.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/home</filename></term> - <listitem><para>The location for normal user's home - directories. Possibly shared with other systems, and never - read-only. This directory should only be used for normal - users, never for system users. This directory and possibly the - directories contained within it might only become available or - writable in late boot or even only after user authentication. - This directory might be placed on limited-functionality - network file systems, hence applications should not assume the - full set of file API is available on this directory. - Applications should generally not reference this directory - directly, but via the per-user <varname>$HOME</varname> - environment variable, or via the home directory field of the - user database.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/root</filename></term> - <listitem><para>The home directory of the root user. The root - user's home directory is located outside of - <filename>/home</filename> in order to make sure the root user - may log in even without <filename>/home</filename> being - available and mounted.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/srv</filename></term> - <listitem><para>The place to store general server payload, - managed by the administrator. No restrictions are made how - this directory is organized internally. Generally writable, - and possibly shared among systems. This directory might become - available or writable only very late during - boot.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/tmp</filename></term> - <listitem><para>The place for small temporary files. This - directory is usually mounted as a <literal>tmpfs</literal> - instance, and should hence not be used for larger files. (Use - <filename>/var/tmp</filename> for larger files.) Since the - directory is accessible to other users of the system, it is - essential that this directory is only written to with the - <citerefentry project='man-pages'><refentrytitle>mkstemp</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>mkdtemp</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and related calls. This directory is usually flushed at - boot-up. Also, files that are not accessed within a certain - time are usually automatically deleted. If applications find - the environment variable <varname>$TMPDIR</varname> set, they - should prefer using the directory specified in it over - directly referencing <filename>/tmp</filename> (see - <citerefentry project='man-pages'><refentrytitle>environ</refentrytitle><manvolnum>7</manvolnum></citerefentry> - and - <ulink url="http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html#tag_08_03">IEEE - Std 1003.1</ulink> for details).</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>Runtime Data</title> - - <variablelist> - <varlistentry> - <term><filename>/run</filename></term> - <listitem><para>A <literal>tmpfs</literal> file system for - system packages to place runtime data in. This directory is - flushed on boot, and generally writable for privileged - programs only. Always writable.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/run/log</filename></term> - <listitem><para>Runtime system logs. System components may - place private logs in this directory. Always writable, even - when <filename>/var/log</filename> might not be accessible - yet.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/run/user</filename></term> - <listitem><para>Contains per-user runtime directories, each - usually individually mounted <literal>tmpfs</literal> - instances. Always writable, flushed at each reboot and when - the user logs out. User code should not reference this - directory directly, but via the - <varname>$XDG_RUNTIME_DIR</varname> environment variable, as - documented in the <ulink - url="http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html">XDG - Base Directory Specification</ulink>.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Vendor-supplied Operating System Resources</title> - - <variablelist> - - <varlistentry> - <term><filename>/usr</filename></term> - <listitem><para>Vendor-supplied operating system resources. - Usually read-only, but this is not required. Possibly shared - between multiple hosts. This directory should not be modified - by the administrator, except when installing or removing - vendor-supplied packages.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/usr/bin</filename></term> - <listitem><para>Binaries and executables for user commands - that shall appear in the <varname>$PATH</varname> search path. - It is recommended not to place binaries in this directory that - are not useful for invocation from a shell (such as daemon - binaries); these should be placed in a subdirectory of - <filename>/usr/lib</filename> instead.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/usr/include</filename></term> - <listitem><para>C and C++ API header files of system - libraries.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/usr/lib</filename></term> - <listitem><para>Static, private vendor data that is compatible - with all architectures (though not necessarily - architecture-independent). Note that this includes internal - executables or other binaries that are not regularly invoked - from a shell. Such binaries may be for any architecture - supported by the system. Do not place public libraries in this - directory, use <varname>$libdir</varname> (see below), - instead.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/usr/lib/<replaceable>arch-id</replaceable></filename></term> - <listitem><para>Location for placing dynamic libraries into, also - called <varname>$libdir</varname>. The architecture identifier - to use is defined on <ulink - url="https://wiki.debian.org/Multiarch/Tuples">Multiarch - Architecture Specifiers (Tuples)</ulink> list. Legacy - locations of <varname>$libdir</varname> are - <filename>/usr/lib</filename>, - <filename>/usr/lib64</filename>. This directory should not be - used for package-specific data, unless this data is - architecture-dependent, too. To query - <varname>$libdir</varname> for the primary architecture of the - system, invoke: - <programlisting># systemd-path system-library-arch</programlisting></para></listitem> - - </varlistentry> - - <varlistentry> - <term><filename>/usr/share</filename></term> - <listitem><para>Resources shared between multiple packages, - such as documentation, man pages, time zone information, fonts - and other resources. Usually, the precise location and format - of files stored below this directory is subject to - specifications that ensure interoperability.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/usr/share/doc</filename></term> - <listitem><para>Documentation for the operating system or - system packages.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/usr/share/factory/etc</filename></term> - <listitem><para>Repository for vendor-supplied default - configuration files. This directory should be populated with - pristine vendor versions of all configuration files that may - be placed in <filename>/etc</filename>. This is useful to - compare the local configuration of a system with vendor - defaults and to populate the local configuration with - defaults.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/usr/share/factory/var</filename></term> - - <listitem><para>Similar to - <filename>/usr/share/factory/etc</filename>, but for vendor - versions of files in the variable, persistent data directory - <filename>/var</filename>.</para></listitem> - - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Persistent Variable System Data</title> - - <variablelist> - <varlistentry> - <term><filename>/var</filename></term> - <listitem><para>Persistent, variable system data. Must be - writable. This directory might be pre-populated with - vendor-supplied data, but applications should be able to - reconstruct necessary files and directories in this - subhierarchy should they be missing, as the system might start - up without this directory being populated. Persistency is - recommended, but optional, to support ephemeral systems. This - directory might become available or writable only very late - during boot. Components that are required to operate during - early boot hence shall not unconditionally rely on this - directory.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/var/cache</filename></term> - <listitem><para>Persistent system cache data. System - components may place non-essential data in this directory. - Flushing this directory should have no effect on operation of - programs, except for increased runtimes necessary to rebuild - these caches.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/var/lib</filename></term> - <listitem><para>Persistent system data. System components may - place private data in this directory.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/var/log</filename></term> - <listitem><para>Persistent system logs. System components may - place private logs in this directory, though it is recommended - to do most logging via the - <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>sd_journal_print</refentrytitle><manvolnum>3</manvolnum></citerefentry> - calls.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/var/spool</filename></term> - <listitem><para>Persistent system spool data, such as printer - or mail queues.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/var/tmp</filename></term> - <listitem><para>The place for larger and persistent temporary - files. In contrast to <filename>/tmp</filename>, this directory - is usually mounted from a persistent physical file system and - can thus accept larger files. (Use <filename>/tmp</filename> - for smaller files.) This directory is generally not flushed at - boot-up, but time-based cleanup of files that have not been - accessed for a certain time is applied. The same security - restrictions as with <filename>/tmp</filename> apply, and - hence only - <citerefentry project='man-pages'><refentrytitle>mkstemp</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>mkdtemp</refentrytitle><manvolnum>3</manvolnum></citerefentry> - or similar calls should be used to make use of this directory. - If applications find the environment variable - <varname>$TMPDIR</varname> set, they should prefer using the - directory specified in it over directly referencing - <filename>/var/tmp</filename> (see - <citerefentry project='man-pages'><refentrytitle>environ</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details). </para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>Virtual Kernel and API File Systems</title> - - <variablelist> - <varlistentry> - <term><filename>/dev</filename></term> - <listitem><para>The root directory for device nodes. Usually, - this directory is mounted as a <literal>devtmpfs</literal> - instance, but might be of a different type in - sandboxed/containerized setups. This directory is managed - jointly by the kernel and - <citerefentry><refentrytitle>systemd-udevd</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - and should not be written to by other components. A number of - special purpose virtual file systems might be mounted below - this directory.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/dev/shm</filename></term> - <listitem><para>Place for POSIX shared memory segments, as - created via - <citerefentry project='die-net'><refentrytitle>shm_open</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - This directory is flushed on boot, and is a - <literal>tmpfs</literal> file system. Since all users have - write access to this directory, special care should be taken - to avoid name clashes and vulnerabilities. For normal users, - shared memory segments in this directory are usually deleted - when the user logs out. Usually, it is a better idea to use - memory mapped files in <filename>/run</filename> (for system - programs) or <varname>$XDG_RUNTIME_DIR</varname> (for user - programs) instead of POSIX shared memory segments, since these - directories are not world-writable and hence not vulnerable to - security-sensitive name clashes.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/proc</filename></term> - <listitem><para>A virtual kernel file system exposing the - process list and other functionality. This file system is - mostly an API to interface with the kernel and not a place - where normal files may be stored. For details, see - <citerefentry project='man-pages'><refentrytitle>proc</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - A number of special purpose virtual file systems might be - mounted below this directory.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/proc/sys</filename></term> - <listitem><para>A hierarchy below <filename>/proc</filename> - that exposes a number of kernel tunables. The primary way to - configure the settings in this API file tree is via - <citerefentry><refentrytitle>sysctl.d</refentrytitle><manvolnum>5</manvolnum></citerefentry> - files. In sandboxed/containerized setups, this directory is - generally mounted read-only.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/sys</filename></term> - <listitem><para>A virtual kernel file system exposing - discovered devices and other functionality. This file system - is mostly an API to interface with the kernel and not a place - where normal files may be stored. In sandboxed/containerized - setups, this directory is generally mounted read-only. A number - of special purpose virtual file systems might be mounted below - this directory.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>Compatibility Symlinks</title> - - <variablelist> - <varlistentry> - <term><filename>/bin</filename></term> - <term><filename>/sbin</filename></term> - <term><filename>/usr/sbin</filename></term> - - <listitem><para>These compatibility symlinks point to - <filename>/usr/bin</filename>, ensuring that scripts and - binaries referencing these legacy paths correctly find their - binaries.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/lib</filename></term> - - <listitem><para>This compatibility symlink points to - <filename>/usr/lib</filename>, ensuring that programs - referencing this legacy path correctly find their - resources.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/lib64</filename></term> - - <listitem><para>On some architecture ABIs, this compatibility - symlink points to <varname>$libdir</varname>, ensuring that - binaries referencing this legacy path correctly find their - dynamic loader. This symlink only exists on architectures - whose ABI places the dynamic loader in this - path.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/var/run</filename></term> - - <listitem><para>This compatibility symlink points to - <filename>/run</filename>, ensuring that programs referencing - this legacy path correctly find their runtime - data.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>Home Directory</title> - - <para>User applications may want to place files and directories in - the user's home directory. They should follow the following basic - structure. Note that some of these directories are also - standardized (though more weakly) by the <ulink - url="http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html">XDG - Base Directory Specification</ulink>. Additional locations for - high-level user resources are defined by <ulink - url="http://www.freedesktop.org/wiki/Software/xdg-user-dirs/">xdg-user-dirs</ulink>.</para> - - <variablelist> - <varlistentry> - <term><filename>~/.cache</filename></term> - - <listitem><para>Persistent user cache data. User programs may - place non-essential data in this directory. Flushing this - directory should have no effect on operation of programs, - except for increased runtimes necessary to rebuild these - caches. If an application finds - <varname>$XDG_CACHE_HOME</varname> set, it should use the - directory specified in it instead of this - directory.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>~/.config</filename></term> - - <listitem><para>Application configuration and state. When a - new user is created, this directory will be empty or not exist - at all. Applications should fall back to defaults should their - configuration or state in this directory be missing. If an - application finds <varname>$XDG_CONFIG_HOME</varname> set, it - should use the directory specified in it instead of this - directory.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>~/.local/bin</filename></term> - - <listitem><para>Executables that shall appear in the user's - <varname>$PATH</varname> search path. It is recommended not to - place executables in this directory that are not useful for - invocation from a shell; these should be placed in a - subdirectory of <filename>~/.local/lib</filename> instead. - Care should be taken when placing architecture-dependent - binaries in this place, which might be problematic if the home - directory is shared between multiple hosts with different - architectures.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>~/.local/lib</filename></term> - - <listitem><para>Static, private vendor data that is compatible - with all architectures.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>~/.local/lib/<replaceable>arch-id</replaceable></filename></term> - - <listitem><para>Location for placing public dynamic libraries. - The architecture identifier to use is defined on <ulink - url="https://wiki.debian.org/Multiarch/Tuples">Multiarch - Architecture Specifiers (Tuples)</ulink> - list.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>~/.local/share</filename></term> - - <listitem><para>Resources shared between multiple packages, - such as fonts or artwork. Usually, the precise location and - format of files stored below this directory is subject to - specifications that ensure interoperability. If an application - finds <varname>$XDG_DATA_HOME</varname> set, it should use the - directory specified in it instead of this - directory.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - - <refsect1> - <title>Unprivileged Write Access</title> - - <para>Unprivileged processes generally lack write access to most - of the hierarchy.</para> - - <para>The exceptions for normal users are - <filename>/tmp</filename>, - <filename>/var/tmp</filename>, - <filename>/dev/shm</filename>, as well as the home directory - <varname>$HOME</varname> (usually found below - <filename>/home</filename>) and the runtime directory - <varname>$XDG_RUNTIME_DIR</varname> (found below - <filename>/run/user</filename>) of the user, which are all - writable.</para> - - <para>For unprivileged system processes, only - <filename>/tmp</filename>, - <filename>/var/tmp</filename> and - <filename>/dev/shm</filename> are writable. If an - unprivileged system process needs a private writable directory in - <filename>/var</filename> or <filename>/run</filename>, it is - recommended to either create it before dropping privileges in the - daemon code, to create it via - <citerefentry><refentrytitle>tmpfiles.d</refentrytitle><manvolnum>5</manvolnum></citerefentry> - fragments during boot, or via the - <varname>RuntimeDirectory=</varname> directive of service units - (see - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details).</para> - </refsect1> - - <refsect1> - <title>Node Types</title> - - <para>Unix file systems support different types of file nodes, - including regular files, directories, symlinks, character and - block device nodes, sockets and FIFOs.</para> - - <para>It is strongly recommended that <filename>/dev</filename> is - the only location below which device nodes shall be placed. - Similarly, <filename>/run</filename> shall be the only location to - place sockets and FIFOs. Regular files, directories and symlinks - may be used in all directories.</para> - </refsect1> - - <refsect1> - <title>System Packages</title> - - <para>Developers of system packages should follow strict rules - when placing their own files in the file system. The following - table lists recommended locations for specific types of files - supplied by the vendor.</para> - - <table> - <title>System Package Vendor Files Locations</title> - <tgroup cols='2' align='left' colsep='1' rowsep='1'> - <colspec colname="directory" /> - <colspec colname="purpose" /> - <thead> - <row> - <entry>Directory</entry> - <entry>Purpose</entry> - </row> - </thead> - <tbody> - <row> - <entry><filename>/usr/bin</filename></entry> - <entry>Package executables that shall appear in the <varname>$PATH</varname> executable search path, compiled for any of the supported architectures compatible with the operating system. It is not recommended to place internal binaries or binaries that are not commonly invoked from the shell in this directory, such as daemon binaries. As this directory is shared with most other packages of the system, special care should be taken to pick unique names for files placed here, that are unlikely to clash with other package's files.</entry> - </row> - <row> - <entry><filename>/usr/lib/<replaceable>arch-id</replaceable></filename></entry> - <entry>Public shared libraries of the package. As above, be careful with using too generic names, and pick unique names for your libraries to place here to avoid name clashes.</entry> - </row> - <row> - <entry><filename>/usr/lib/<replaceable>package</replaceable></filename></entry> - <entry>Private static vendor resources of the package, including private binaries and libraries, or any other kind of read-only vendor data.</entry> - </row> - <row> - <entry><filename>/usr/lib/<replaceable>arch-id</replaceable>/<replaceable>package</replaceable></filename></entry> - <entry>Private other vendor resources of the package that are architecture-specific and cannot be shared between architectures. Note that this generally does not include private executables since binaries of a specific architecture may be freely invoked from any other supported system architecture.</entry> - </row> - <row> - <entry><filename>/usr/include/<replaceable>package</replaceable></filename></entry> - <entry>Public C/C++ APIs of public shared libraries of the package.</entry> - </row> - </tbody> - </tgroup> - </table> - - <para>Additional static vendor files may be installed in the - <filename>/usr/share</filename> hierarchy to the locations - defined by the various relevant specifications.</para> - - <para>During runtime, and for local configuration and state, - additional directories are defined:</para> - - <table> - <title>System Package Variable Files Locations</title> - <tgroup cols='2' align='left' colsep='1' rowsep='1'> - <colspec colname="directory" /> - <colspec colname="purpose" /> - <thead> - <row> - <entry>Directory</entry> - <entry>Purpose</entry> - </row> - </thead> - <tbody> - <row> - <entry><filename>/etc/<replaceable>package</replaceable></filename></entry> - <entry>System-specific configuration for the package. It is recommended to default to safe fallbacks if this configuration is missing, if this is possible. Alternatively, a <citerefentry><refentrytitle>tmpfiles.d</refentrytitle><manvolnum>5</manvolnum></citerefentry> fragment may be used to copy or symlink the necessary files and directories from <filename>/usr/share/factory</filename> during boot, via the <literal>L</literal> or <literal>C</literal> directives.</entry> - </row> - <row> - <entry><filename>/run/<replaceable>package</replaceable></filename></entry> - <entry>Runtime data for the package. Packages must be able to create the necessary subdirectories in this tree on their own, since the directory is flushed automatically on boot. Alternatively, a <citerefentry><refentrytitle>tmpfiles.d</refentrytitle><manvolnum>5</manvolnum></citerefentry> fragment may be used to create the necessary directories during boot. Alternatively, the <varname>RuntimeDirectory=</varname> directive of service units may be used (see <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> for details.)</entry> - </row> - <row> - <entry><filename>/run/log/<replaceable>package</replaceable></filename></entry> - <entry>Runtime log data for the package. As above, the package needs to make sure to create this directory if necessary, as it will be flushed on every boot.</entry> - </row> - <row> - <entry><filename>/var/cache/<replaceable>package</replaceable></filename></entry> - <entry>Persistent cache data of the package. If this directory is flushed, the application should work correctly on next invocation, though possibly slowed down due to the need to rebuild any local cache files. The application must be capable of recreating this directory should it be missing and necessary.</entry> - </row> - <row> - <entry><filename>/var/lib/<replaceable>package</replaceable></filename></entry> - <entry>Persistent private data of the package. This is the primary place to put persistent data that does not fall into the other categories listed. Packages should be able to create the necessary subdirectories in this tree on their own, since the directory might be missing on boot. Alternatively, a <citerefentry><refentrytitle>tmpfiles.d</refentrytitle><manvolnum>5</manvolnum></citerefentry> fragment may be used to create the necessary directories during boot.</entry> - </row> - <row> - <entry><filename>/var/log/<replaceable>package</replaceable></filename></entry> - <entry>Persistent log data of the package. As above, the package should make sure to create this directory if necessary, as it might be missing.</entry> - </row> - <row> - <entry><filename>/var/spool/<replaceable>package</replaceable></filename></entry> - <entry>Persistent spool/queue data of the package. As above, the package should make sure to create this directory if necessary, as it might be missing.</entry> - </row> - </tbody> - </tgroup> - </table> - </refsect1> - - <refsect1> - <title>User Packages</title> - - <para>Programs running in user context should follow strict rules - when placing their own files in the user's home directory. The - following table lists recommended locations in the home directory - for specific types of files supplied by the vendor if the - application is installed in the home directory. (Note, however, - that user applications installed system-wide should follow the - rules outlined above regarding placing vendor files.)</para> - - <table> - <title>User Package Vendor File Locations</title> - <tgroup cols='2' align='left' colsep='1' rowsep='1'> - <colspec colname="directory" /> - <colspec colname="purpose" /> - <thead> - <row> - <entry>Directory</entry> - <entry>Purpose</entry> - </row> - </thead> - <tbody> - <row> - <entry><filename>~/.local/bin</filename></entry> - <entry>Package executables that shall appear in the <varname>$PATH</varname> executable search path. It is not recommended to place internal executables or executables that are not commonly invoked from the shell in this directory, such as daemon executables. As this directory is shared with most other packages of the user, special care should be taken to pick unique names for files placed here, that are unlikely to clash with other package's files.</entry> - </row> - <row> - <entry><filename>~/.local/lib/<replaceable>arch-id</replaceable></filename></entry> - <entry>Public shared libraries of the package. As above, be careful with using too generic names, and pick unique names for your libraries to place here to avoid name clashes.</entry> - </row> - <row> - <entry><filename>~/.local/lib/<replaceable>package</replaceable></filename></entry> - <entry>Private, static vendor resources of the package, compatible with any architecture, or any other kind of read-only vendor data.</entry> - </row> - <row> - <entry><filename>~/.local/lib/<replaceable>arch-id</replaceable>/<replaceable>package</replaceable></filename></entry> - <entry>Private other vendor resources of the package that are architecture-specific and cannot be shared between architectures.</entry> - </row> - </tbody> - </tgroup> - </table> - - <para>Additional static vendor files may be installed in the - <filename>~/.local/share</filename> hierarchy to the locations - defined by the various relevant specifications.</para> - - <para>During runtime, and for local configuration and state, - additional directories are defined:</para> - - <table> - <title>User Package Variable File Locations</title> - <tgroup cols='2' align='left' colsep='1' rowsep='1'> - <colspec colname="directory" /> - <colspec colname="purpose" /> - <thead> - <row> - <entry>Directory</entry> - <entry>Purpose</entry> - </row> - </thead> - <tbody> - <row> - <entry><filename>~/.config/<replaceable>package</replaceable></filename></entry> - <entry>User-specific configuration and state for the package. It is required to default to safe fallbacks if this configuration is missing.</entry> - </row> - <row> - <entry><filename><varname>$XDG_RUNTIME_DIR</varname>/<replaceable>package</replaceable></filename></entry> - <entry>User runtime data for the package.</entry> - </row> - <row> - <entry><filename>~/.cache/<replaceable>package</replaceable></filename></entry> - <entry>Persistent cache data of the package. If this directory is flushed, the application should work correctly on next invocation, though possibly slowed down due to the need to rebuild any local cache files. The application must be capable of recreating this directory should it be missing and necessary.</entry> - </row> - </tbody> - </tgroup> - </table> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>hier</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-path</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-gpt-auto-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sysctl.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>tmpfiles.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/glib-event-glue.c b/man/glib-event-glue.c deleted file mode 100644 index 8f3168d0ea..0000000000 --- a/man/glib-event-glue.c +++ /dev/null @@ -1,68 +0,0 @@ -/*** - Copyright 2014 Tom Gundersen - - Permission is hereby granted, free of charge, to any person - obtaining a copy of this software and associated documentation files - (the "Software"), to deal in the Software without restriction, - including without limitation the rights to use, copy, modify, merge, - publish, distribute, sublicense, and/or sell copies of the Software, - and to permit persons to whom the Software is furnished to do so, - subject to the following conditions: - - The above copyright notice and this permission notice shall be - included in all copies or substantial portions of the Software. - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS - BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN - ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN - CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE - SOFTWARE. -***/ - -#include <stdlib.h> - -typedef struct SDEventSource { - GSource source; - GPollFD pollfd; - sd_event *event; -} SDEventSource; - -static gboolean event_prepare(GSource *source, gint *timeout_) { - return sd_event_prepare(((SDEventSource *)source)->event) > 0; -} - -static gboolean event_check(GSource *source) { - return sd_event_wait(((SDEventSource *)source)->event, 0) > 0; -} - -static gboolean event_dispatch(GSource *source, GSourceFunc callback, gpointer user_data) { - return sd_event_dispatch(((SDEventSource *)source)->event) > 0; -} - -static void event_finalize(GSource *source) { - sd_event_unref(((SDEventSource *)source)->event); -} - -static GSourceFuncs event_funcs = { - .prepare = event_prepare, - .check = event_check, - .dispatch = event_dispatch, - .finalize = event_finalize, -}; - -GSource *g_sd_event_create_source(sd_event *event) { - SDEventSource *source; - - source = (SDEventSource *)g_source_new(&event_funcs, sizeof(SDEventSource)); - - source->event = sd_event_ref(event); - source->pollfd.fd = sd_event_get_fd(event); - source->pollfd.events = G_IO_IN | G_IO_HUP | G_IO_ERR; - - g_source_add_poll((GSource *)source, &source->pollfd); - - return (GSource *)source; -} diff --git a/man/halt.xml b/man/halt.xml deleted file mode 100644 index e3fa60a915..0000000000 --- a/man/halt.xml +++ /dev/null @@ -1,176 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="halt" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>halt</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>halt</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>halt</refname> - <refname>poweroff</refname> - <refname>reboot</refname> - <refpurpose>Halt, power-off or reboot the machine</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>halt</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - </cmdsynopsis> - <cmdsynopsis> - <command>poweroff</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - </cmdsynopsis> - <cmdsynopsis> - <command>reboot</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>halt</command>, <command>poweroff</command>, - <command>reboot</command> may be used to halt, power-off or reboot - the machine.</para> - - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--help</option></term> - - <xi:include href="standard-options.xml" xpointer="help-text" /> - </varlistentry> - - <varlistentry> - <term><option>--halt</option></term> - - <listitem><para>Halt the machine, regardless of which one of - the three commands is invoked.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-p</option></term> - <term><option>--poweroff</option></term> - - <listitem><para>Power-off the machine, regardless of which one - of the three commands is invoked.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--reboot</option></term> - - <listitem><para>Reboot the machine, regardless of which one of - the three commands is invoked.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-f</option></term> - <term><option>--force</option></term> - - <listitem><para>Force immediate halt, power-off, reboot. Do - not contact the init system.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-w</option></term> - <term><option>--wtmp-only</option></term> - - <listitem><para>Only write wtmp shutdown entry, do not - actually halt, power-off, reboot.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-d</option></term> - <term><option>--no-wtmp</option></term> - - <listitem><para>Do not write wtmp shutdown - entry.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-n</option></term> - <term><option>--no-sync</option></term> - - <listitem><para>Don't sync hard disks/storage media before - halt, power-off, reboot.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--no-wall</option></term> - - <listitem><para>Do not send wall message before halt, - power-off, reboot.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>These are legacy commands available for compatibility - only.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>shutdown</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/hostname.xml b/man/hostname.xml deleted file mode 100644 index 8a4c0d5ac0..0000000000 --- a/man/hostname.xml +++ /dev/null @@ -1,98 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="hostname"> - <refentryinfo> - <title>hostname</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>hostname</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>hostname</refname> - <refpurpose>Local hostname configuration file</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/hostname</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>The <filename>/etc/hostname</filename> file configures the - name of the local system that is set during boot using the - <citerefentry><refentrytitle>sethostname</refentrytitle><manvolnum>2</manvolnum></citerefentry> - system call. It should contain a single newline-terminated - hostname string. Comments (lines starting with a `#') are ignored. - The hostname may be a free-form string up to 64 characters in length; - however, it is recommended that it consists only of 7-bit ASCII lower-case - characters and no spaces or dots, and limits itself to the format allowed - for DNS domain name labels, even though this is not a strict - requirement.</para> - - <para>You may use - <citerefentry><refentrytitle>hostnamectl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - to change the value of this file during runtime from the command - line. Use - <citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry> - to initialize it on mounted (but not booted) system images.</para> - </refsect1> - - <refsect1> - <title>History</title> - - <para>The simple configuration file format of - <filename>/etc/hostname</filename> originates from Debian - GNU/Linux.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sethostname</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - <citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machine-info</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>hostnamectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-hostnamed.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/hostnamectl.xml b/man/hostnamectl.xml deleted file mode 100644 index 60004e9d04..0000000000 --- a/man/hostnamectl.xml +++ /dev/null @@ -1,260 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="hostnamectl" conditional='ENABLE_HOSTNAMED' - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>hostnamectl</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>hostnamectl</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>hostnamectl</refname> - <refpurpose>Control the system hostname</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>hostnamectl</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="req">COMMAND</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>hostnamectl</command> may be used to query and - change the system hostname and related settings.</para> - - <para>This tool distinguishes three different hostnames: the - high-level "pretty" hostname which might include all kinds of - special characters (e.g. "Lennart's Laptop"), the static hostname - which is used to initialize the kernel hostname at boot (e.g. - "lennarts-laptop"), and the transient hostname which is a fallback - value received from network configuration. If a static hostname is - set, and is valid (something other than localhost), then the - transient hostname is not used.</para> - - <para>Note that the pretty hostname has little restrictions on the - characters used, while the static and transient hostnames are - limited to the usually accepted characters of Internet domain - names.</para> - - <para>The static hostname is stored in - <filename>/etc/hostname</filename>, see - <citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information. The pretty hostname, chassis type, and icon - name are stored in <filename>/etc/machine-info</filename>, see - <citerefentry><refentrytitle>machine-info</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - - <para>Use - <citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry> - to initialize the system host name for mounted (but not booted) - system images.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--no-ask-password</option></term> - - <listitem><para>Do not query the user for authentication for - privileged operations.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--static</option></term> - <term><option>--transient</option></term> - <term><option>--pretty</option></term> - - <listitem><para>If <command>status</command> is used (or no - explicit command is given) and one of those fields is given, - <command>hostnamectl</command> will print out just this - selected hostname.</para> - - <para>If used with <command>set-hostname</command>, only the - selected hostname(s) will be updated. When more than one of - those options is used, all the specified hostnames will be - updated. </para></listitem> - </varlistentry> - - <xi:include href="user-system-options.xml" xpointer="host" /> - <xi:include href="user-system-options.xml" xpointer="machine" /> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - - <para>The following commands are understood:</para> - - <variablelist> - <varlistentry> - <term><command>status</command></term> - - <listitem><para>Show current system - hostname and related - information.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>set-hostname <replaceable>NAME</replaceable></command></term> - - <listitem><para>Set the system hostname to - <replaceable>NAME</replaceable>. By default, this will alter - the pretty, the static, and the transient hostname alike; - however, if one or more of <option>--static</option>, - <option>--transient</option>, <option>--pretty</option> are - used, only the selected hostnames are changed. If the pretty - hostname is being set, and static or transient are being set - as well, the specified hostname will be simplified in regards - to the character set used before the latter are updated. This - is done by replacing spaces with <literal>-</literal> and - removing special characters. This ensures that the pretty and - the static hostname are always closely related while still - following the validity rules of the specific name. This - simplification of the hostname string is not done if only the - transient and/or static host names are set, and the pretty - host name is left untouched.</para> - - <para>Pass the empty string <literal></literal> as the - hostname to reset the selected hostnames to their default - (usually <literal>localhost</literal>).</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>set-icon-name <replaceable>NAME</replaceable></command></term> - - <listitem><para>Set the system icon name to - <replaceable>NAME</replaceable>. The icon name is used by some - graphical applications to visualize this host. The icon name - should follow the <ulink - url="http://standards.freedesktop.org/icon-naming-spec/icon-naming-spec-latest.html">Icon - Naming Specification</ulink>.</para> - - <para>Pass an empty string to reset the icon name to the - default value, which is determined from chassis type (see - below) and possibly other parameters.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>set-chassis <replaceable>TYPE</replaceable></command></term> - - <listitem><para>Set the chassis type to - <replaceable>TYPE</replaceable>. The chassis type is used by - some graphical applications to visualize the host or alter - user interaction. Currently, the following chassis types are - defined: - <literal>desktop</literal>, - <literal>laptop</literal>, - <literal>server</literal>, - <literal>tablet</literal>, - <literal>handset</literal>, - <literal>watch</literal>, - <literal>embedded</literal>, - as well as the special chassis types - <literal>vm</literal> and - <literal>container</literal> for virtualized systems that lack - an immediate physical chassis.</para> - - <para>Pass an empty string to reset the chassis type to the - default value which is determined from the firmware and - possibly other parameters.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>set-deployment <replaceable>ENVIRONMENT</replaceable></command></term> - - <listitem><para>Set the deployment environment description. - <replaceable>ENVIRONMENT</replaceable> must be a single word - without any control characters. One of the following is - suggested: - <literal>development</literal>, - <literal>integration</literal>, - <literal>staging</literal>, - <literal>production</literal>. - </para> - - <para>Pass an empty string to reset to the default empty - value.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>set-location <replaceable>LOCATION</replaceable></command></term> - - <listitem><para>Set the location string for the system, if it - is known. <replaceable>LOCATION</replaceable> should be a - human-friendly, free-form string describing the physical - location of the system, if it is known and applicable. This - may be as generic as <literal>Berlin, Germany</literal> or as - specific as <literal>Left Rack, 2nd Shelf</literal>.</para> - - <para>Pass an empty string to reset to the default empty - value.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machine-info</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-hostnamed.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/hwdb.xml b/man/hwdb.xml deleted file mode 100644 index 2b1e60fb22..0000000000 --- a/man/hwdb.xml +++ /dev/null @@ -1,85 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<refentry id="hwdb" conditional="ENABLE_HWDB"> - <refentryinfo> - <title>hwdb</title> - <productname>systemd</productname> - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Kay</firstname> - <surname>Sievers</surname> - <email>kay@vrfy.org</email> - </author> - <author> - <contrib>Developer</contrib> - <firstname>Tom</firstname> - <surname>Gundersen</surname> - <email>teg@jklm.no</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>hwdb</refentrytitle> - <manvolnum>7</manvolnum> - </refmeta> - - <refnamediv> - <refname>hwdb</refname> - <refpurpose>Hardware Database</refpurpose> - </refnamediv> - - <refsect1><title>Description</title> - <para>The hardware database is a key-value store for associating modalias-like keys to - udev-property-like values. It is used primarily by udev to add the relevant properties - to matching devices, but it can also be queried directly.</para> - </refsect1> - - <refsect1><title>Hardware Database Files</title> - <para>The hwdb files are read from the files located in the - system hwdb directory <filename>/usr/lib/udev/hwdb.d</filename> and - the local administration directory <filename>/etc/udev/hwdb.d</filename>. - All hwdb files are collectively sorted and processed in lexical order, - regardless of the directories in which they live. However, files with - identical filenames replace each other. Files in <filename>/etc</filename> - have the highest priority and take precedence over files with the same - name in <filename>/usr/lib</filename>. This can be used to override a - system-supplied hwdb file with a local file if needed; - a symlink in <filename>/etc</filename> with the same name as a hwdb file in - <filename>/usr/lib</filename>, pointing to <filename>/dev/null</filename>, - disables the hwdb file entirely. hwdb files must have the extension - <filename>.hwdb</filename>; other extensions are ignored.</para> - - <para>The hwdb file contains data records consisting of matches and - associated key-value pairs. Every record in the hwdb starts with one or - more match strings, specifying a shell glob to compare the database - lookup string against. Multiple match lines are specified in additional - consecutive lines. Every match line is compared individually, and they are - combined by OR. Every match line must start at the first character of - the line.</para> - - <para>The match lines are followed by one or more key-value pair lines, which - are recognized by a leading space character. The key name and value are separated - by <literal>=</literal>. An empty line signifies the end - of a record. Lines beginning with <literal>#</literal> are ignored.</para> - - <para>The content of all hwdb files is read by - <citerefentry><refentrytitle>systemd-hwdb</refentrytitle><manvolnum>8</manvolnum></citerefentry> - and compiled to a binary database located at <filename>/etc/udev/hwdb.bin</filename>, - or alternatively <filename>/usr/lib/udev/hwdb.bin</filename> if you want ship the compiled - database in an immutable image. - During runtime, only the binary database is used.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry> - <refentrytitle>systemd-hwdb</refentrytitle><manvolnum>8</manvolnum> - </citerefentry> - </para> - </refsect1> -</refentry> diff --git a/man/journal-remote.conf.xml b/man/journal-remote.conf.xml deleted file mode 100644 index 2d345963d9..0000000000 --- a/man/journal-remote.conf.xml +++ /dev/null @@ -1,121 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Chris Morgan - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="journal-remote.conf" conditional='HAVE_MICROHTTPD' - xmlns:xi="http://www.w3.org/2001/XInclude"> - <refentryinfo> - <title>journal-remote.conf</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Chris</firstname> - <surname>Morgan</surname> - <email>chmorgan@gmail.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>journal-remote.conf</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>journal-remote.conf</refname> - <refname>journal-remote.conf.d</refname> - <refpurpose>Journal remote service configuration files</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/systemd/journal-remote.conf</filename></para> - <para><filename>/etc/systemd/journald.conf.d/*.conf</filename></para> - <para><filename>/run/systemd/journald.conf.d/*.conf</filename></para> - <para><filename>/usr/lib/systemd/journald.conf.d/*.conf</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>These files configure various parameters of the systemd-remote-journal - application, - <citerefentry><refentrytitle>systemd-journal-remote</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </refsect1> - - <xi:include href="standard-conf.xml" xpointer="main-conf" /> - - <refsect1> - <title>Options</title> - - <para>All options are configured in the - <literal>[Remote]</literal> section:</para> - - <variablelist> - <varlistentry> - <term><varname>Seal=</varname></term> - - <listitem><para>Periodically sign the data in the journal using Forward Secure Sealing. - </para></listitem> - </varlistentry> - - - <varlistentry> - <term><varname>SplitMode=</varname></term> - - <listitem><para>One of <literal>host</literal> or <literal>none</literal>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ServerKeyFile=</varname></term> - - <listitem><para>SSL key in PEM format.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ServerCertificateFile=</varname></term> - - <listitem><para>SSL CA certificate in PEM format.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>TrustedCertificateFile=</varname></term> - - <listitem><para>SSL CA certificate.</para></listitem> - </varlistentry> - - </variablelist> - - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd-journal-remote</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/journalctl.xml b/man/journalctl.xml deleted file mode 100644 index 3efe6ef62a..0000000000 --- a/man/journalctl.xml +++ /dev/null @@ -1,914 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - - <refentry id="journalctl" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>journalctl</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>journalctl</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>journalctl</refname> - <refpurpose>Query the systemd journal</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>journalctl</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="opt" rep="repeat">MATCHES</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>journalctl</command> may be used to query the - contents of the - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - journal as written by - <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - - <para>If called without parameters, it will show the full - contents of the journal, starting with the oldest entry - collected.</para> - - <para>If one or more match arguments are passed, the output is - filtered accordingly. A match is in the format - <literal>FIELD=VALUE</literal>, - e.g. <literal>_SYSTEMD_UNIT=httpd.service</literal>, referring - to the components of a structured journal entry. See - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for a list of well-known fields. If multiple matches are - specified matching different fields, the log entries are - filtered by both, i.e. the resulting output will show only - entries matching all the specified matches of this kind. If two - matches apply to the same field, then they are automatically - matched as alternatives, i.e. the resulting output will show - entries matching any of the specified matches for the same - field. Finally, the character <literal>+</literal> may appear - as a separate word between other terms on the command line. This - causes all matches before and after to be combined in a - disjunction (i.e. logical OR).</para> - - <para>As shortcuts for a few types of field/value matches, file - paths may be specified. If a file path refers to an executable - file, this is equivalent to an <literal>_EXE=</literal> match - for the canonicalized binary path. Similarly, if a path refers - to a device node then match is added for the kernel name of the - device (<literal>_KERNEL_DEVICE=</literal>). Also, matches for the - kernel names of all the parent devices are added automatically. - Device node paths are not stable across reboots, therefore match - for the current boot id (<literal>_BOOT_ID=</literal>) is - always added as well. Note that only the log entries for - the existing device nodes maybe queried by providing path to - the device node.</para> - - <para>Additional constraints may be added using options - <option>--boot</option>, <option>--unit=</option>, etc., to - further limit what entries will be shown (logical AND).</para> - - <para>Output is interleaved from all accessible journal files, - whether they are rotated or currently being written, and - regardless of whether they belong to the system itself or are - accessible user journals.</para> - - <para>The set of journal files which will be used can be - modified using the <option>--user</option>, - <option>--system</option>, <option>--directory</option>, and - <option>--file</option> options, see below.</para> - - <para>All users are granted access to their private per-user - journals. However, by default, only root and users who are - members of a few special groups are granted access to the system - journal and the journals of other users. Members of the groups - <literal>systemd-journal</literal>, <literal>adm</literal>, and - <literal>wheel</literal> can read all journal files. Note - that the two latter groups traditionally have additional - privileges specified by the distribution. Members of the - <literal>wheel</literal> group can often perform administrative - tasks.</para> - - <para>The output is paged through <command>less</command> by - default, and long lines are "truncated" to screen width. The - hidden part can be viewed by using the left-arrow and - right-arrow keys. Paging can be disabled; see the - <option>--no-pager</option> option and the "Environment" section - below.</para> - - <para>When outputting to a tty, lines are colored according to - priority: lines of level ERROR and higher are colored red; lines - of level NOTICE and higher are highlighted; other lines are - displayed normally.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--no-full</option></term> - <term><option>--full</option></term> - <term><option>-l</option></term> - - <listitem><para>Ellipsize fields when they do not fit in - available columns. The default is to show full fields, - allowing them to wrap or be truncated by the pager, if one - is used.</para> - - <para>The old options - <option>-l</option>/<option>--full</option> are not useful - anymore, except to undo <option>--no-full</option>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-a</option></term> - <term><option>--all</option></term> - - <listitem><para>Show all fields in full, even if they - include unprintable characters or are very - long.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-f</option></term> - <term><option>--follow</option></term> - - <listitem><para>Show only the most recent journal entries, - and continuously print new entries as they are appended to - the journal.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-e</option></term> - <term><option>--pager-end</option></term> - - <listitem><para>Immediately jump to the end of the journal - inside the implied pager tool. This implies - <option>-n1000</option> to guarantee that the pager will not - buffer logs of unbounded size. This may be overridden with - an explicit <option>-n</option> with some other numeric - value, while <option>-nall</option> will disable this cap. - Note that this option is only supported for the - <citerefentry project='man-pages'><refentrytitle>less</refentrytitle><manvolnum>1</manvolnum></citerefentry> - pager.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-n</option></term> - <term><option>--lines=</option></term> - - <listitem><para>Show the most recent journal events and - limit the number of events shown. If - <option>--follow</option> is used, this option is - implied. The argument is a positive integer or - <literal>all</literal> to disable line limiting. The default - value is 10 if no argument is given.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--no-tail</option></term> - - <listitem><para>Show all stored output lines, even in follow - mode. Undoes the effect of <option>--lines=</option>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-r</option></term> - <term><option>--reverse</option></term> - - <listitem><para>Reverse output so that the newest entries - are displayed first.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-o</option></term> - <term><option>--output=</option></term> - - <listitem><para>Controls the formatting of the journal - entries that are shown. Takes one of the following - options:</para> - <variablelist> - <varlistentry> - <term> - <option>short</option> - </term> - <listitem> - <para>is the default and generates an output that is - mostly identical to the formatting of classic syslog - files, showing one line per journal entry.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term> - <option>short-iso</option> - </term> - <listitem> - <para>is very similar, but shows ISO 8601 wallclock - timestamps.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term> - <option>short-precise</option> - </term> - <listitem> - <para>is very similar, but shows timestamps with full - microsecond precision.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term> - <option>short-monotonic</option> - </term> - <listitem> - <para>is very similar, but shows monotonic timestamps - instead of wallclock timestamps.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term> - <option>short-unix</option> - </term> - <listitem> - <para>is very similar, but shows seconds passed since January 1st 1970 UTC instead of wallclock - timestamps ("UNIX time"). The time is shown with microsecond accuracy.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term> - <option>verbose</option> - </term> - <listitem> - <para>shows the full-structured entry items with all - fields.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term> - <option>export</option> - </term> - <listitem> - <para>serializes the journal into a binary (but mostly - text-based) stream suitable for backups and network - transfer (see - <ulink url="http://www.freedesktop.org/wiki/Software/systemd/export">Journal Export Format</ulink> - for more information).</para> - </listitem> - </varlistentry> - - <varlistentry> - <term> - <option>json</option> - </term> - <listitem> - <para>formats entries as JSON data structures, one per - line (see - <ulink url="http://www.freedesktop.org/wiki/Software/systemd/json">Journal JSON Format</ulink> - for more information).</para> - </listitem> - </varlistentry> - - <varlistentry> - <term> - <option>json-pretty</option> - </term> - <listitem> - <para>formats entries as JSON data structures, but - formats them in multiple lines in order to make them - more readable by humans.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term> - <option>json-sse</option> - </term> - <listitem> - <para>formats entries as JSON data structures, but wraps - them in a format suitable for - <ulink url="https://developer.mozilla.org/en-US/docs/Server-sent_events/Using_server-sent_events">Server-Sent Events</ulink>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term> - <option>cat</option> - </term> - <listitem> - <para>generates a very terse output, only showing the - actual message of each journal entry with no metadata, - not even a timestamp.</para> - </listitem> - </varlistentry> - </variablelist> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--utc</option></term> - - <listitem><para>Express time in Coordinated Universal Time - (UTC).</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--no-hostname</option></term> - - <listitem><para>Don't show the hostname field of log messages originating from the local host. This switch only - has an effect on the <option>short</option> family of output modes (see above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-x</option></term> - <term><option>--catalog</option></term> - - <listitem><para>Augment log lines with explanation texts from - the message catalog. This will add explanatory help texts to - log messages in the output where this is available. These - short help texts will explain the context of an error or log - event, possible solutions, as well as pointers to support - forums, developer documentation, and any other relevant - manuals. Note that help texts are not available for all - messages, but only for selected ones. For more information on - the message catalog, please refer to the - <ulink url="http://www.freedesktop.org/wiki/Software/systemd/catalog">Message Catalog Developer Documentation</ulink>.</para> - - <para>Note: when attaching <command>journalctl</command> - output to bug reports, please do <emphasis>not</emphasis> use - <option>-x</option>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-q</option></term> - <term><option>--quiet</option></term> - - <listitem><para>Suppresses all info messages - (i.e. "-- Logs begin at ...", "-- Reboot --"), - any warning messages regarding - inaccessible system journals when run as a normal - user.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-m</option></term> - <term><option>--merge</option></term> - - <listitem><para>Show entries interleaved from all available - journals, including remote ones.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-b <optional><replaceable>ID</replaceable></optional><optional><replaceable>±offset</replaceable></optional></option></term> - <term><option>--boot=<optional><replaceable>ID</replaceable></optional><optional><replaceable>±offset</replaceable></optional></option></term> - - <listitem><para>Show messages from a specific boot. This will - add a match for <literal>_BOOT_ID=</literal>.</para> - - <para>The argument may be empty, in which case logs for the - current boot will be shown.</para> - - <para>If the boot ID is omitted, a positive - <replaceable>offset</replaceable> will look up the boots - starting from the beginning of the journal, and an - equal-or-less-than zero <replaceable>offset</replaceable> will - look up boots starting from the end of the journal. Thus, - <constant>1</constant> means the first boot found in the - journal in chronological order, <constant>2</constant> the - second and so on; while <constant>-0</constant> is the last - boot, <constant>-1</constant> the boot before last, and so - on. An empty <replaceable>offset</replaceable> is equivalent - to specifying <constant>-0</constant>, except when the current - boot is not the last boot (e.g. because - <option>--directory</option> was specified to look at logs - from a different machine).</para> - - <para>If the 32-character <replaceable>ID</replaceable> is - specified, it may optionally be followed by - <replaceable>offset</replaceable> which identifies the boot - relative to the one given by boot - <replaceable>ID</replaceable>. Negative values mean earlier - boots and positive values mean later boots. If - <replaceable>offset</replaceable> is not specified, a value of - zero is assumed, and the logs for the boot given by - <replaceable>ID</replaceable> are shown.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--list-boots</option></term> - - <listitem><para>Show a tabular list of boot numbers (relative to - the current boot), their IDs, and the timestamps of the first - and last message pertaining to the boot.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-k</option></term> - <term><option>--dmesg</option></term> - - <listitem><para>Show only kernel messages. This implies - <option>-b</option> and adds the match - <literal>_TRANSPORT=kernel</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-t</option></term> - <term><option>--identifier=<replaceable>SYSLOG_IDENTIFIER</replaceable></option></term> - - <listitem><para>Show messages for the specified syslog - identifier - <replaceable>SYSLOG_IDENTIFIER</replaceable>.</para> - - <para>This parameter can be specified multiple - times.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-u</option></term> - <term><option>--unit=<replaceable>UNIT</replaceable>|<replaceable>PATTERN</replaceable></option></term> - - <listitem><para>Show messages for the specified systemd unit - <replaceable>UNIT</replaceable> (such as a service unit), or - for any of the units matched by - <replaceable>PATTERN</replaceable>. If a pattern is - specified, a list of unit names found in the journal is - compared with the specified pattern and all that match are - used. For each unit name, a match is added for messages from - the unit - (<literal>_SYSTEMD_UNIT=<replaceable>UNIT</replaceable></literal>), - along with additional matches for messages from systemd and - messages about coredumps for the specified unit.</para> - - <para>This parameter can be specified multiple times.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--user-unit=</option></term> - - <listitem><para>Show messages for the specified user session - unit. This will add a match for messages from the unit - (<literal>_SYSTEMD_USER_UNIT=</literal> and - <literal>_UID=</literal>) and additional matches for messages - from session systemd and messages about coredumps for the - specified unit.</para> - - <para>This parameter can be specified multiple times.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-p</option></term> - <term><option>--priority=</option></term> - - <listitem><para>Filter output by message priorities or - priority ranges. Takes either a single numeric or textual log - level (i.e. between 0/<literal>emerg</literal> and - 7/<literal>debug</literal>), or a range of numeric/text log - levels in the form FROM..TO. The log levels are the usual - syslog log levels as documented in - <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - i.e. <literal>emerg</literal> (0), - <literal>alert</literal> (1), <literal>crit</literal> (2), - <literal>err</literal> (3), <literal>warning</literal> (4), - <literal>notice</literal> (5), <literal>info</literal> (6), - <literal>debug</literal> (7). If a single log level is - specified, all messages with this log level or a lower (hence - more important) log level are shown. If a range is specified, - all messages within the range are shown, including both the - start and the end value of the range. This will add - <literal>PRIORITY=</literal> matches for the specified - priorities.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-c</option></term> - <term><option>--cursor=</option></term> - - <listitem><para>Start showing entries from the location in the - journal specified by the passed cursor.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--after-cursor=</option></term> - - <listitem><para>Start showing entries from the location in the - journal <emphasis>after</emphasis> the location specified by - the passed cursor. The cursor is shown when the - <option>--show-cursor</option> option is used.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--show-cursor</option></term> - - <listitem><para>The cursor is shown after the last entry after - two dashes:</para> - <programlisting>-- cursor: s=0639...</programlisting> - <para>The format of the cursor is private - and subject to change.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-S</option></term> - <term><option>--since=</option></term> - <term><option>-U</option></term> - <term><option>--until=</option></term> - - <listitem><para>Start showing entries on or newer than the - specified date, or on or older than the specified date, - respectively. Date specifications should be of the format - <literal>2012-10-30 18:17:16</literal>. If the time part is - omitted, <literal>00:00:00</literal> is assumed. If only the - seconds component is omitted, <literal>:00</literal> is - assumed. If the date component is omitted, the current day is - assumed. Alternatively the strings - <literal>yesterday</literal>, <literal>today</literal>, - <literal>tomorrow</literal> are understood, which refer to - 00:00:00 of the day before the current day, the current day, - or the day after the current day, - respectively. <literal>now</literal> refers to the current - time. Finally, relative times may be specified, prefixed with - <literal>-</literal> or <literal>+</literal>, referring to - times before or after the current time, respectively. For complete - time and date specification, see - <citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-F</option></term> - <term><option>--field=</option></term> - - <listitem><para>Print all possible data values the specified - field can take in all entries of the journal.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-N</option></term> - <term><option>--fields</option></term> - - <listitem><para>Print all field names currently used in all entries of the journal.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--system</option></term> - <term><option>--user</option></term> - - <listitem><para>Show messages from system services and the - kernel (with <option>--system</option>). Show messages from - service of current user (with <option>--user</option>). If - neither is specified, show all messages that the user can see. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-M</option></term> - <term><option>--machine=</option></term> - - <listitem><para>Show messages from a running, local - container. Specify a container name to connect to.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-D <replaceable>DIR</replaceable></option></term> - <term><option>--directory=<replaceable>DIR</replaceable></option></term> - - <listitem><para>Takes a directory path as argument. If - specified, journalctl will operate on the specified journal - directory <replaceable>DIR</replaceable> instead of the - default runtime and system journal paths.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--file=<replaceable>GLOB</replaceable></option></term> - - <listitem><para>Takes a file glob as an argument. If - specified, journalctl will operate on the specified journal - files matching <replaceable>GLOB</replaceable> instead of the - default runtime and system journal paths. May be specified - multiple times, in which case files will be suitably - interleaved.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--root=<replaceable>ROOT</replaceable></option></term> - - <listitem><para>Takes a directory path as an argument. If - specified, journalctl will operate on catalog file hierarchy - underneath the specified directory instead of the root - directory (e.g. <option>--update-catalog</option> will create - <filename><replaceable>ROOT</replaceable>/var/lib/systemd/catalog/database</filename>). - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--new-id128</option></term> - - <listitem><para>Instead of showing journal contents, generate - a new 128-bit ID suitable for identifying messages. This is - intended for usage by developers who need a new identifier for - a new message they introduce and want to make - recognizable. This will print the new ID in three different - formats which can be copied into source code or similar. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--header</option></term> - - <listitem><para>Instead of showing journal contents, show - internal header information of the journal fields - accessed.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--disk-usage</option></term> - - <listitem><para>Shows the current disk usage of all journal - files. This shows the sum of the disk usage of all archived - and active journal files.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--vacuum-size=</option></term> - <term><option>--vacuum-time=</option></term> - <term><option>--vacuum-files=</option></term> - - <listitem><para>Removes archived journal files until the disk - space they use falls below the specified size (specified with - the usual <literal>K</literal>, <literal>M</literal>, - <literal>G</literal> and <literal>T</literal> suffixes), or all - archived journal files contain no data older than the specified - timespan (specified with the usual <literal>s</literal>, - <literal>m</literal>, <literal>h</literal>, - <literal>days</literal>, <literal>months</literal>, - <literal>weeks</literal> and <literal>years</literal> suffixes), - or no more than the specified number of separate journal files - remain. Note that running <option>--vacuum-size=</option> has - only an indirect effect on the output shown by - <option>--disk-usage</option>, as the latter includes active - journal files, while the vacuuming operation only operates - on archived journal files. Similarly, - <option>--vacuum-files=</option> might not actually reduce the - number of journal files to below the specified number, as it - will not remove active journal - files. <option>--vacuum-size=</option>, - <option>--vacuum-time=</option> and - <option>--vacuum-files=</option> may be combined in a single - invocation to enforce any combination of a size, a time and a - number of files limit on the archived journal - files. Specifying any of these three parameters as zero is - equivalent to not enforcing the specific limit, and is thus - redundant.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--list-catalog - <optional><replaceable>128-bit-ID...</replaceable></optional> - </option></term> - - <listitem><para>List the contents of the message catalog as a - table of message IDs, plus their short description strings. - </para> - - <para>If any <replaceable>128-bit-ID</replaceable>s are - specified, only those entries are shown.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--dump-catalog - <optional><replaceable>128-bit-ID...</replaceable></optional> - </option></term> - - <listitem><para>Show the contents of the message catalog, with - entries separated by a line consisting of two dashes and the - ID (the format is the same as <filename>.catalog</filename> - files).</para> - - <para>If any <replaceable>128-bit-ID</replaceable>s are - specified, only those entries are shown.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--update-catalog</option></term> - - <listitem><para>Update the message catalog index. This command - needs to be executed each time new catalog files are - installed, removed, or updated to rebuild the binary catalog - index.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--setup-keys</option></term> - - <listitem><para>Instead of showing journal contents, generate - a new key pair for Forward Secure Sealing (FSS). This will - generate a sealing key and a verification key. The sealing key - is stored in the journal data directory and shall remain on - the host. The verification key should be stored - externally. Refer to the <option>Seal=</option> option in - <citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for information on Forward Secure Sealing and for a link to a - refereed scholarly paper detailing the cryptographic theory it - is based on.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--force</option></term> - - <listitem><para>When <option>--setup-keys</option> is passed - and Forward Secure Sealing (FSS) has already been configured, - recreate FSS keys.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--interval=</option></term> - - <listitem><para>Specifies the change interval for the sealing - key when generating an FSS key pair with - <option>--setup-keys</option>. Shorter intervals increase CPU - consumption but shorten the time range of undetectable journal - alterations. Defaults to 15min.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--verify</option></term> - - <listitem><para>Check the journal file for internal - consistency. If the file has been generated with FSS enabled and - the FSS verification key has been specified with - <option>--verify-key=</option>, authenticity of the journal file - is verified.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--verify-key=</option></term> - - <listitem><para>Specifies the FSS verification key to use for - the <option>--verify</option> operation.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--sync</option></term> - - <listitem><para>Asks the journal daemon to write all yet - unwritten journal data to the backing file system and - synchronize all journals. This call does not return until the - synchronization operation is complete. This command guarantees - that any log messages written before its invocation are safely - stored on disk at the time it returns.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--flush</option></term> - - <listitem><para>Asks the journal daemon to flush any log data - stored in <filename>/run/log/journal</filename> into - <filename>/var/log/journal</filename>, if persistent storage - is enabled. This call does not return until the operation is - complete. Note that this call is idempotent: the data is only - flushed from <filename>/run/log/journal</filename> into - <filename>/var/log/journal</filename> once during system - runtime, and this command exits cleanly without executing any - operation if this has already has happened. This command - effectively guarantees that all data is flushed to - <filename>/var/log/journal</filename> at the time it - returns.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--rotate</option></term> - - <listitem><para>Asks the journal daemon to rotate journal - files. This call does not return until the rotation operation - is complete.</para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - <xi:include href="standard-options.xml" xpointer="no-pager" /> - </variablelist> - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned; otherwise, a non-zero failure - code is returned.</para> - </refsect1> - - <xi:include href="less-variables.xml" /> - - <refsect1> - <title>Examples</title> - - <para>Without arguments, all collected logs are shown - unfiltered:</para> - - <programlisting>journalctl</programlisting> - - <para>With one match specified, all entries with a field matching - the expression are shown:</para> - - <programlisting>journalctl _SYSTEMD_UNIT=avahi-daemon.service</programlisting> - - <para>If two different fields are matched, only entries matching - both expressions at the same time are shown:</para> - - <programlisting>journalctl _SYSTEMD_UNIT=avahi-daemon.service _PID=28097</programlisting> - - <para>If two matches refer to the same field, all entries matching - either expression are shown:</para> - - <programlisting>journalctl _SYSTEMD_UNIT=avahi-daemon.service _SYSTEMD_UNIT=dbus.service</programlisting> - - <para>If the separator <literal>+</literal> is used, two - expressions may be combined in a logical OR. The following will - show all messages from the Avahi service process with the PID - 28097 plus all messages from the D-Bus service (from any of its - processes):</para> - - <programlisting>journalctl _SYSTEMD_UNIT=avahi-daemon.service _PID=28097 + _SYSTEMD_UNIT=dbus.service</programlisting> - - <para>Show all logs generated by the D-Bus executable:</para> - - <programlisting>journalctl /usr/bin/dbus-daemon</programlisting> - - <para>Show all kernel logs from previous boot:</para> - - <programlisting>journalctl -k -b -1</programlisting> - - <para>Show a live log display from a system service - <filename>apache.service</filename>:</para> - - <programlisting>journalctl -f -u apache</programlisting> - - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>coredumpctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> -</refentry> diff --git a/man/journald.conf.xml b/man/journald.conf.xml deleted file mode 100644 index 3964cd6bc5..0000000000 --- a/man/journald.conf.xml +++ /dev/null @@ -1,410 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="journald.conf" - xmlns:xi="http://www.w3.org/2001/XInclude"> - <refentryinfo> - <title>journald.conf</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>journald.conf</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>journald.conf</refname> - <refname>journald.conf.d</refname> - <refpurpose>Journal service configuration files</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/systemd/journald.conf</filename></para> - <para><filename>/etc/systemd/journald.conf.d/*.conf</filename></para> - <para><filename>/run/systemd/journald.conf.d/*.conf</filename></para> - <para><filename>/usr/lib/systemd/journald.conf.d/*.conf</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>These files configure various parameters of the systemd - journal service, - <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - - </refsect1> - - <xi:include href="standard-conf.xml" xpointer="main-conf" /> - - <refsect1> - <title>Options</title> - - <para>All options are configured in the - <literal>[Journal]</literal> section:</para> - - <variablelist> - - <varlistentry> - <term><varname>Storage=</varname></term> - - <listitem><para>Controls where to store journal data. One of - <literal>volatile</literal>, - <literal>persistent</literal>, - <literal>auto</literal> and - <literal>none</literal>. If - <literal>volatile</literal>, journal - log data will be stored only in memory, i.e. below the - <filename>/run/log/journal</filename> hierarchy (which is - created if needed). If <literal>persistent</literal>, data - will be stored preferably on disk, i.e. below the - <filename>/var/log/journal</filename> hierarchy (which is - created if needed), with a fallback to - <filename>/run/log/journal</filename> (which is created if - needed), during early boot and if the disk is not writable. - <literal>auto</literal> is similar to - <literal>persistent</literal> but the directory - <filename>/var/log/journal</filename> is not created if - needed, so that its existence controls where log data goes. - <literal>none</literal> turns off all storage, all log data - received will be dropped. Forwarding to other targets, such as - the console, the kernel log buffer, or a syslog socket will - still work however. Defaults to - <literal>auto</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Compress=</varname></term> - - <listitem><para>Takes a boolean value. If enabled (the - default), data objects that shall be stored in the journal and - are larger than a certain threshold are compressed before they - are written to the file system.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Seal=</varname></term> - - <listitem><para>Takes a boolean value. If enabled (the - default), and a sealing key is available (as created by - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s - <option>--setup-keys</option> command), Forward Secure Sealing - (FSS) for all persistent journal files is enabled. FSS is - based on <ulink - url="https://eprint.iacr.org/2013/397">Seekable Sequential Key - Generators</ulink> by G. A. Marson and B. Poettering - (doi:10.1007/978-3-642-40203-6_7) and may be used to protect - journal files from unnoticed alteration.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SplitMode=</varname></term> - - <listitem><para>Controls whether to split up journal files per - user. One of <literal>uid</literal>, <literal>login</literal> - and <literal>none</literal>. If <literal>uid</literal>, all - users will get each their own journal files regardless of - whether they possess a login session or not, however system - users will log into the system journal. If - <literal>login</literal>, actually logged-in users will get - each their own journal files, but users without login session - and system users will log into the system journal. If - <literal>none</literal>, journal files are not split up by - user and all messages are instead stored in the single system - journal. Note that splitting up journal files by user is only - available for journals stored persistently. If journals are - stored on volatile storage (see above), only a single journal - file for all user IDs is kept. Defaults to - <literal>uid</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RateLimitIntervalSec=</varname></term> - <term><varname>RateLimitBurst=</varname></term> - - <listitem><para>Configures the rate limiting that is applied - to all messages generated on the system. If, in the time - interval defined by <varname>RateLimitIntervalSec=</varname>, - more messages than specified in - <varname>RateLimitBurst=</varname> are logged by a service, - all further messages within the interval are dropped until the - interval is over. A message about the number of dropped - messages is generated. This rate limiting is applied - per-service, so that two services which log do not interfere - with each other's limits. Defaults to 1000 messages in 30s. - The time specification for - <varname>RateLimitIntervalSec=</varname> may be specified in the - following units: <literal>s</literal>, <literal>min</literal>, - <literal>h</literal>, <literal>ms</literal>, - <literal>us</literal>. To turn off any kind of rate limiting, - set either value to 0.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SystemMaxUse=</varname></term> - <term><varname>SystemKeepFree=</varname></term> - <term><varname>SystemMaxFileSize=</varname></term> - <term><varname>SystemMaxFiles=</varname></term> - <term><varname>RuntimeMaxUse=</varname></term> - <term><varname>RuntimeKeepFree=</varname></term> - <term><varname>RuntimeMaxFileSize=</varname></term> - <term><varname>RuntimeMaxFiles=</varname></term> - - <listitem><para>Enforce size limits on the journal files - stored. The options prefixed with <literal>System</literal> - apply to the journal files when stored on a persistent file - system, more specifically - <filename>/var/log/journal</filename>. The options prefixed - with <literal>Runtime</literal> apply to the journal files - when stored on a volatile in-memory file system, more - specifically <filename>/run/log/journal</filename>. The former - is used only when <filename>/var</filename> is mounted, - writable, and the directory - <filename>/var/log/journal</filename> exists. Otherwise, only - the latter applies. Note that this means that during early - boot and if the administrator disabled persistent logging, - only the latter options apply, while the former apply if - persistent logging is enabled and the system is fully booted - up. <command>journalctl</command> and - <command>systemd-journald</command> ignore all files with - names not ending with <literal>.journal</literal> or - <literal>.journal~</literal>, so only such files, located in - the appropriate directories, are taken into account when - calculating current disk usage.</para> - - <para><varname>SystemMaxUse=</varname> and - <varname>RuntimeMaxUse=</varname> control how much disk space - the journal may use up at most. - <varname>SystemKeepFree=</varname> and - <varname>RuntimeKeepFree=</varname> control how much disk - space systemd-journald shall leave free for other uses. - <command>systemd-journald</command> will respect both limits - and use the smaller of the two values.</para> - - <para>The first pair defaults to 10% and the second to 15% of - the size of the respective file system, but each value is - capped to 4G. If the file system is nearly full and either - <varname>SystemKeepFree=</varname> or - <varname>RuntimeKeepFree=</varname> are violated when - systemd-journald is started, the limit will be raised to the - percentage that is actually free. This means that if there was - enough free space before and journal files were created, and - subsequently something else causes the file system to fill up, - journald will stop using more space, but it will not be - removing existing files to reduce the footprint again, - either.</para> - - <para><varname>SystemMaxFileSize=</varname> and - <varname>RuntimeMaxFileSize=</varname> control how large - individual journal files may grow at most. This influences - the granularity in which disk space is made available through - rotation, i.e. deletion of historic data. Defaults to one - eighth of the values configured with - <varname>SystemMaxUse=</varname> and - <varname>RuntimeMaxUse=</varname>, so that usually seven - rotated journal files are kept as history.</para> - - <para>Specify values in bytes or use K, M, G, T, P, E as - units for the specified sizes (equal to 1024, 1024², ... bytes). - Note that size limits are enforced synchronously when journal - files are extended, and no explicit rotation step triggered by - time is needed.</para> - - <para><varname>SystemMaxFiles=</varname> and - <varname>RuntimeMaxFiles=</varname> control how many - individual journal files to keep at most. Note that only - archived files are deleted to reduce the number of files until - this limit is reached; active files will stay around. This - means that, in effect, there might still be more journal files - around in total than this limit after a vacuuming operation is - complete. This setting defaults to 100.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>MaxFileSec=</varname></term> - - <listitem><para>The maximum time to store entries in a single - journal file before rotating to the next one. Normally, - time-based rotation should not be required as size-based - rotation with options such as - <varname>SystemMaxFileSize=</varname> should be sufficient to - ensure that journal files do not grow without bounds. However, - to ensure that not too much data is lost at once when old - journal files are deleted, it might make sense to change this - value from the default of one month. Set to 0 to turn off this - feature. This setting takes time values which may be suffixed - with the units <literal>year</literal>, - <literal>month</literal>, <literal>week</literal>, - <literal>day</literal>, <literal>h</literal> or - <literal>m</literal> to override the default time unit of - seconds.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>MaxRetentionSec=</varname></term> - - <listitem><para>The maximum time to store journal entries. - This controls whether journal files containing entries older - then the specified time span are deleted. Normally, time-based - deletion of old journal files should not be required as - size-based deletion with options such as - <varname>SystemMaxUse=</varname> should be sufficient to - ensure that journal files do not grow without bounds. However, - to enforce data retention policies, it might make sense to - change this value from the default of 0 (which turns off this - feature). This setting also takes time values which may be - suffixed with the units <literal>year</literal>, - <literal>month</literal>, <literal>week</literal>, - <literal>day</literal>, <literal>h</literal> or <literal> - m</literal> to override the default time unit of - seconds.</para></listitem> - </varlistentry> - - - <varlistentry> - <term><varname>SyncIntervalSec=</varname></term> - - <listitem><para>The timeout before synchronizing journal files - to disk. After syncing, journal files are placed in the - OFFLINE state. Note that syncing is unconditionally done - immediately after a log message of priority CRIT, ALERT or - EMERG has been logged. This setting hence applies only to - messages of the levels ERR, WARNING, NOTICE, INFO, DEBUG. The - default timeout is 5 minutes. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ForwardToSyslog=</varname></term> - <term><varname>ForwardToKMsg=</varname></term> - <term><varname>ForwardToConsole=</varname></term> - <term><varname>ForwardToWall=</varname></term> - - <listitem><para>Control whether log messages received by the - journal daemon shall be forwarded to a traditional syslog - daemon, to the kernel log buffer (kmsg), to the system - console, or sent as wall messages to all logged-in users. - These options take boolean arguments. If forwarding to syslog - is enabled but nothing reads messages from the socket, - forwarding to syslog has no effect. By default, only - forwarding to wall is enabled. These settings may be - overridden at boot time with the kernel command line options - <literal>systemd.journald.forward_to_syslog=</literal>, - <literal>systemd.journald.forward_to_kmsg=</literal>, - <literal>systemd.journald.forward_to_console=</literal>, and - <literal>systemd.journald.forward_to_wall=</literal>. When - forwarding to the console, the TTY to log to can be changed - with <varname>TTYPath=</varname>, described - below.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>MaxLevelStore=</varname></term> - <term><varname>MaxLevelSyslog=</varname></term> - <term><varname>MaxLevelKMsg=</varname></term> - <term><varname>MaxLevelConsole=</varname></term> - <term><varname>MaxLevelWall=</varname></term> - - <listitem><para>Controls the maximum log level of messages - that are stored on disk, forwarded to syslog, kmsg, the - console or wall (if that is enabled, see above). As argument, - takes one of - <literal>emerg</literal>, - <literal>alert</literal>, - <literal>crit</literal>, - <literal>err</literal>, - <literal>warning</literal>, - <literal>notice</literal>, - <literal>info</literal>, - <literal>debug</literal>, - or integer values in the range of 0–7 (corresponding to the - same levels). Messages equal or below the log level specified - are stored/forwarded, messages above are dropped. Defaults to - <literal>debug</literal> for <varname>MaxLevelStore=</varname> - and <varname>MaxLevelSyslog=</varname>, to ensure that the all - messages are written to disk and forwarded to syslog. Defaults - to - <literal>notice</literal> for <varname>MaxLevelKMsg=</varname>, - <literal>info</literal> for <varname>MaxLevelConsole=</varname>, - and <literal>emerg</literal> for - <varname>MaxLevelWall=</varname>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>TTYPath=</varname></term> - - <listitem><para>Change the console TTY to use if - <varname>ForwardToConsole=yes</varname> is used. Defaults to - <filename>/dev/console</filename>.</para></listitem> - </varlistentry> - - </variablelist> - - </refsect1> - - <refsect1> - <title>Forwarding to traditional syslog daemons</title> - - <para> - Journal events can be transferred to a different logging daemon - in two different ways. With the first method, messages are - immediately forwarded to a socket - (<filename>/run/systemd/journal/syslog</filename>), where the - traditional syslog daemon can read them. This method is - controlled by the <varname>ForwardToSyslog=</varname> option. With a - second method, a syslog daemon behaves like a normal journal - client, and reads messages from the journal files, similarly to - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - With this, messages do not have to be read immediately, - which allows a logging daemon which is only started late in boot - to access all messages since the start of the system. In - addition, full structured meta-data is available to it. This - method of course is available only if the messages are stored in - a journal file at all. So it will not work if - <varname>Storage=none</varname> is set. It should be noted that - usually the <emphasis>second</emphasis> method is used by syslog - daemons, so the <varname>Storage=</varname> option, and not the - <varname>ForwardToSyslog=</varname> option, is relevant for them. - </para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/kernel-command-line.xml b/man/kernel-command-line.xml deleted file mode 100644 index 9c04849f66..0000000000 --- a/man/kernel-command-line.xml +++ /dev/null @@ -1,382 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="kernel-command-line"> - - <refentryinfo> - <title>kernel-command-line</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>kernel-command-line</refentrytitle> - <manvolnum>7</manvolnum> - </refmeta> - - <refnamediv> - <refname>kernel-command-line</refname> - <refpurpose>Kernel command line parameters</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/proc/cmdline</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>The kernel, the initial RAM disk (initrd) and - basic userspace functionality may be configured at boot via - kernel command line arguments.</para> - - <para>For command line parameters understood by the kernel, please - see <ulink - url="https://www.kernel.org/doc/Documentation/kernel-parameters.txt"><filename>kernel-parameters.txt</filename></ulink> - and - <citerefentry project='man-pages'><refentrytitle>bootparam</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - - <para>For command line parameters understood by the initial RAM - disk, please see - <citerefentry project='man-pages'><refentrytitle>dracut.cmdline</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - or the documentation of the specific initrd implementation of your - installation.</para> - </refsect1> - - <refsect1> - <title>Core OS Command Line Arguments</title> - - <variablelist class='kernel-commandline-options'> - <varlistentry> - <term><varname>systemd.unit=</varname></term> - <term><varname>rd.systemd.unit=</varname></term> - <term><varname>systemd.dump_core=</varname></term> - <term><varname>systemd.crash_chvt=</varname></term> - <term><varname>systemd.crash_shell=</varname></term> - <term><varname>systemd.crash_reboot=</varname></term> - <term><varname>systemd.confirm_spawn=</varname></term> - <term><varname>systemd.show_status=</varname></term> - <term><varname>systemd.log_target=</varname></term> - <term><varname>systemd.log_level=</varname></term> - <term><varname>systemd.log_color=</varname></term> - <term><varname>systemd.log_location=</varname></term> - <term><varname>systemd.default_standard_output=</varname></term> - <term><varname>systemd.default_standard_error=</varname></term> - <term><varname>systemd.setenv=</varname></term> - <term><varname>systemd.machine_id=</varname></term> - <listitem> - <para>Parameters understood by the system and service - manager to control system behavior. For details, see - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>systemd.mask=</varname></term> - <term><varname>systemd.wants=</varname></term> - <term><varname>systemd.debug-shell</varname></term> - <listitem> - <para>Additional parameters understood by - <citerefentry><refentrytitle>systemd-debug-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - to mask or start specific units at boot, or invoke a debug - shell on tty9.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>systemd.restore_state=</varname></term> - <listitem> - <para>This parameter is understood by several system tools - to control whether or not they should restore system state - from the previous boot. For details, see - <citerefentry><refentrytitle>systemd-backlight@.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd-rfkill.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>quiet</varname></term> - <listitem> - <para>Parameter understood by both the kernel and the system - and service manager to control console log verbosity. For - details, see - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>debug</varname></term> - <listitem> - <para>Parameter understood by both the kernel and the system - and service manager to control console log verbosity. For - details, see - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>-b</varname></term> - <term><varname>emergency</varname></term> - <term><varname>rescue</varname></term> - <term><varname>single</varname></term> - <term><varname>s</varname></term> - <term><varname>S</varname></term> - <term><varname>1</varname></term> - <term><varname>2</varname></term> - <term><varname>3</varname></term> - <term><varname>4</varname></term> - <term><varname>5</varname></term> - <listitem> - <para>Parameters understood by the system and service - manager, as compatibility options. For details, see - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>locale.LANG=</varname></term> - <term><varname>locale.LANGUAGE=</varname></term> - <term><varname>locale.LC_CTYPE=</varname></term> - <term><varname>locale.LC_NUMERIC=</varname></term> - <term><varname>locale.LC_TIME=</varname></term> - <term><varname>locale.LC_COLLATE=</varname></term> - <term><varname>locale.LC_MONETARY=</varname></term> - <term><varname>locale.LC_MESSAGES=</varname></term> - <term><varname>locale.LC_PAPER=</varname></term> - <term><varname>locale.LC_NAME=</varname></term> - <term><varname>locale.LC_ADDRESS=</varname></term> - <term><varname>locale.LC_TELEPHONE=</varname></term> - <term><varname>locale.LC_MEASUREMENT=</varname></term> - <term><varname>locale.LC_IDENTIFICATION=</varname></term> - <listitem> - <para>Parameters understood by the system and service - manager to control locale and language settings. For - details, see - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>fsck.mode=</varname></term> - <term><varname>fsck.repair=</varname></term> - - <listitem> - <para>Parameters understood by the file system checker - services. For details, see - <citerefentry><refentrytitle>systemd-fsck@.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>quotacheck.mode=</varname></term> - - <listitem> - <para>Parameter understood by the file quota checker - service. For details, see - <citerefentry><refentrytitle>systemd-quotacheck.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>systemd.journald.forward_to_syslog=</varname></term> - <term><varname>systemd.journald.forward_to_kmsg=</varname></term> - <term><varname>systemd.journald.forward_to_console=</varname></term> - <term><varname>systemd.journald.forward_to_wall=</varname></term> - - <listitem> - <para>Parameters understood by the journal service. For - details, see - <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>vconsole.keymap=</varname></term> - <term><varname>vconsole.keymap.toggle=</varname></term> - <term><varname>vconsole.font=</varname></term> - <term><varname>vconsole.font.map=</varname></term> - <term><varname>vconsole.font.unimap=</varname></term> - - <listitem> - <para>Parameters understood by the virtual console setup - logic. For details, see - <citerefentry><refentrytitle>systemd-vconsole-setup.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>udev.log-priority=</varname></term> - <term><varname>rd.udev.log-priority=</varname></term> - <term><varname>udev.children-max=</varname></term> - <term><varname>rd.udev.children-max=</varname></term> - <term><varname>udev.exec-delay=</varname></term> - <term><varname>rd.udev.exec-delay=</varname></term> - <term><varname>udev.event-timeout=</varname></term> - <term><varname>rd.udev.event-timeout=</varname></term> - <term><varname>net.ifnames=</varname></term> - - <listitem> - <para>Parameters understood by the device event managing - daemon. For details, see - <citerefentry><refentrytitle>systemd-udevd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>plymouth.enable=</varname></term> - - <listitem> - <para>May be used to disable the Plymouth boot splash. For - details, see - <citerefentry project='die-net'><refentrytitle>plymouth</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>luks=</varname></term> - <term><varname>rd.luks=</varname></term> - <term><varname>luks.crypttab=</varname></term> - <term><varname>rd.luks.crypttab=</varname></term> - <term><varname>luks.name=</varname></term> - <term><varname>rd.luks.name=</varname></term> - <term><varname>luks.uuid=</varname></term> - <term><varname>rd.luks.uuid=</varname></term> - <term><varname>luks.options=</varname></term> - <term><varname>rd.luks.options=</varname></term> - <term><varname>luks.key=</varname></term> - <term><varname>rd.luks.key=</varname></term> - - <listitem> - <para>Configures the LUKS full-disk encryption logic at - boot. For details, see - <citerefentry><refentrytitle>systemd-cryptsetup-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>fstab=</varname></term> - <term><varname>rd.fstab=</varname></term> - - <listitem> - <para>Configures the <filename>/etc/fstab</filename> logic - at boot. For details, see - <citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>root=</varname></term> - <term><varname>rootfstype=</varname></term> - <term><varname>rootflags=</varname></term> - <term><varname>ro</varname></term> - <term><varname>rw</varname></term> - - <listitem> - <para>Configures the root file system and its file system - type and mount options, as well as whether it shall be - mounted read-only or read-writable initially. For details, - see - <citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>systemd.gpt_auto=</varname></term> - <term><varname>rd.systemd.gpt_auto=</varname></term> - - <listitem> - <para>Configures whether GPT based partition auto-discovery - shall be attempted. For details, see - <citerefentry><refentrytitle>systemd-gpt-auto-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>systemd.default_timeout_start_sec=</varname></term> - - <listitem> - <para>Overwrites the default start job timeout <varname>DefaultTimeoutStartSec=</varname> at boot. For details, - see <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>modules-load=</varname></term> - <term><varname>rd.modules-load=</varname></term> - - <listitem> - <para>Load a specific kernel module early at boot. For - details, see - <citerefentry><refentrytitle>systemd-modules-load.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>resume=</varname></term> - - <listitem> - <para>Enables resume from hibernation using the specified - device. All - <citerefentry project='man-pages'><refentrytitle>fstab</refentrytitle><manvolnum>5</manvolnum></citerefentry>-like - paths are supported. For details, see - <citerefentry><refentrytitle>systemd-hibernate-resume-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - </variablelist> - - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>bootparam</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>dracut.cmdline</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-debug-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-fsck@.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-quotacheck.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-vconsole-setup.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-udevd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>plymouth</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-cryptsetup-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-gpt-auto-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-modules-load.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-backlight@.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-rfkill.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-hibernate-resume-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/kernel-install.xml b/man/kernel-install.xml deleted file mode 100644 index eb519188a6..0000000000 --- a/man/kernel-install.xml +++ /dev/null @@ -1,192 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2013 Harald Hoyer - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="kernel-install"> - - <refentryinfo> - <title>kernel-install</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Harald</firstname> - <surname>Hoyer</surname> - <email>harald@redhat.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>kernel-install</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>kernel-install</refname> - <refpurpose>Add and remove kernel and initramfs images to and from /boot</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>kernel-install</command> - <arg choice="plain">COMMAND</arg> - <arg choice="plain"><replaceable>KERNEL-VERSION</replaceable></arg> - <arg choice="opt"><replaceable>KERNEL-IMAGE</replaceable></arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - <para> - <command>kernel-install</command> is used to install and remove kernel and - initramfs images to and from <filename>/boot</filename>. - </para> - - <para><command>kernel-install</command> will execute the files - located in the directory <filename>/usr/lib/kernel/install.d/</filename> - and the local administration directory <filename>/etc/kernel/install.d/</filename>. - All files are collectively sorted and executed in lexical order, regardless of the directory in - which they live. However, files with identical filenames replace each other. - Files in <filename>/etc/kernel/install.d/</filename> take precedence over files with the same name - in <filename>/usr/lib/kernel/install.d/</filename>. This can be used to override a system-supplied - executables with a local file if needed; a symbolic link in <filename>/etc/kernel/install.d/</filename> - with the same name as an executable in <filename>/usr/lib/kernel/install.d/</filename>, - pointing to /dev/null, disables the executable entirely. Executables must have the - extension <literal>.install</literal>; other extensions are ignored.</para> - - </refsect1> - - <refsect1> - <title>Commands</title> - <para>The following commands are understood:</para> - <variablelist> - <varlistentry> - <term><command>add <replaceable>KERNEL-VERSION</replaceable> <replaceable>KERNEL-IMAGE</replaceable></command></term> - <listitem> - <para><command>kernel-install</command> creates the directory - <filename>/boot/<replaceable>MACHINE-ID</replaceable>/<replaceable>KERNEL-VERSION</replaceable>/</filename> - and calls every executable - <filename>/usr/lib/kernel/install.d/*.install</filename> and - <filename>/etc/kernel/install.d/*.install</filename> with - the arguments - <programlisting>add <replaceable>KERNEL-VERSION</replaceable> <filename>/boot/<replaceable>MACHINE-ID</replaceable>/<replaceable>KERNEL-VERSION</replaceable>/</filename></programlisting> - </para> - - <para>The kernel-install plugin <filename>50-depmod.install</filename> runs depmod for the <replaceable>KERNEL-VERSION</replaceable>.</para> - - <para>The kernel-install plugin - <filename>90-loaderentry.install</filename> copies - <replaceable>KERNEL-IMAGE</replaceable> to - <filename>/boot/<replaceable>MACHINE-ID</replaceable>/<replaceable>KERNEL-VERSION</replaceable>/linux</filename>. - It also creates a boot loader entry according to the boot - loader specification in - <filename>/boot/loader/entries/<replaceable>MACHINE-ID</replaceable>-<replaceable>KERNEL-VERSION</replaceable>.conf</filename>. - The title of the entry is the - <replaceable>PRETTY_NAME</replaceable> parameter specified - in <filename>/etc/os-release</filename> or - <filename>/usr/lib/os-release</filename> (if the former is - missing), or "GNU/Linux - <replaceable>KERNEL-VERSION</replaceable>", if unset. If - the file <filename>initrd</filename> is found next to the - <filename>linux</filename> file, the initrd will be added to - the configuration.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>remove <replaceable>KERNEL-VERSION</replaceable></command></term> - <listitem> - <para>Calls every executable <filename>/usr/lib/kernel/install.d/*.install</filename> - and <filename>/etc/kernel/install.d/*.install</filename> with the arguments - <programlisting>remove <replaceable>KERNEL-VERSION</replaceable> <filename>/boot/<replaceable>MACHINE-ID</replaceable>/<replaceable>KERNEL-VERSION</replaceable>/</filename></programlisting> - </para> - - <para><command>kernel-install</command> removes the entire directory - <filename>/boot/<replaceable>MACHINE-ID</replaceable>/<replaceable>KERNEL-VERSION</replaceable>/</filename> afterwards.</para> - - <para>The kernel-install plugin <filename>90-loaderentry.install</filename> removes the file - <filename>/boot/loader/entries/<replaceable>MACHINE-ID</replaceable>-<replaceable>KERNEL-VERSION</replaceable>.conf</filename>.</para> - </listitem> - </varlistentry> - - </variablelist> - - </refsect1> - - <refsect1> - <title>Exit status</title> - <para>If every executable returns with 0, 0 is returned, a non-zero failure code otherwise.</para> - </refsect1> - - <refsect1> - <title>Files</title> - <variablelist> - <varlistentry> - <term> - <filename>/usr/lib/kernel/install.d/*.install</filename> - <filename>/etc/kernel/install.d/*.install</filename> - </term> - <listitem> - <para>Drop-in files which are executed by kernel-install.</para> - </listitem> - </varlistentry> - <varlistentry> - <term> - <filename>/etc/kernel/cmdline</filename> - <filename>/proc/cmdline</filename> - </term> - <listitem> - <para>The content of the file <filename>/etc/kernel/cmdline</filename> specifies the kernel command line to use. - If that file does not exist, <filename>/proc/cmdline</filename> is used.</para> - </listitem> - </varlistentry> - <varlistentry> - <term> - <filename>/etc/machine-id</filename> - </term> - <listitem> - <para>The content of the file specifies the machine identification <replaceable>MACHINE-ID</replaceable>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term> - <filename>/etc/os-release</filename> - <filename>/usr/lib/os-release</filename> - </term> - <listitem> - <para>The content of the file specifies the operating system title <replaceable>PRETTY_NAME</replaceable>.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>os-release</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <ulink url="http://www.freedesktop.org/wiki/Specifications/BootLoaderSpec">Boot loader specification</ulink> - </para> - </refsect1> - -</refentry> diff --git a/man/libsystemd-pkgconfig.xml b/man/libsystemd-pkgconfig.xml deleted file mode 100644 index 272da64cd7..0000000000 --- a/man/libsystemd-pkgconfig.xml +++ /dev/null @@ -1,12 +0,0 @@ -<?xml version="1.0"?> -<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" - "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd"> - -<refsect1> - <title>Notes</title> - - <para id='pkgconfig-text'>These APIs are implemented as a shared - library, which can be compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> -</refsect1> diff --git a/man/libudev.xml b/man/libudev.xml deleted file mode 100644 index 7ef978463c..0000000000 --- a/man/libudev.xml +++ /dev/null @@ -1,125 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ -<!ENTITY % entities SYSTEM "custom-entities.ent" > -%entities; -]> - -<!-- - This file is part of systemd. - - Copyright 2015 David Herrmann <dh.herrmann@gmail.com> - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="libudev" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>libudev</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>David</firstname> - <surname>Herrmann</surname> - <email>dh.herrmann@gmail.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>libudev</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>libudev</refname> - <refpurpose>API for enumerating and introspecting local devices</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <libudev.h></funcsynopsisinfo> - </funcsynopsis> - - <cmdsynopsis> - <command>pkg-config --cflags --libs libudev</command> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>libudev.h</filename> provides APIs to introspect - and enumerate devices on the local system.</para> - - <para>All functions require a libudev context to operate. This - context can be create via - <citerefentry><refentrytitle>udev_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - It is used to track library state and link objects together. No - global state is used by libudev, everything is always linked to - a udev context. Furthermore, multiple different udev contexts can - be used in parallel by multiple threads. However, a single context - must not be accessed by multiple threads in parallel. The caller - is responsible for providing suitable locking if they intend to use - it from multiple threads.</para> - - <para>To introspect a local device on a system, a udev device - object can be created via - <citerefentry><refentrytitle>udev_device_new_from_syspath</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and friends. The device object allows to query current state, - read and write attributes and lookup properties of the device in - question.</para> - - <para>To enumerate local devices on the system, an enumeration - object can be created via - <citerefentry><refentrytitle>udev_enumerate_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para>To monitor the local system for hotplugged or unplugged - devices, a monitor can be created via - <citerefentry><refentrytitle>udev_monitor_new_from_netlink</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para>Whenever libudev returns a list of objects, the - <citerefentry><refentrytitle>udev_list_entry</refentrytitle><manvolnum>3</manvolnum></citerefentry> - API should be used to iterate, access and modify those lists.</para> - - <para>Furthermore, libudev also exports legacy APIs that should - not be used by new software (and as such are not documented as - part of this manual). This includes the hardware database known - as <constant>udev_hwdb</constant> (please use the new - <citerefentry><refentrytitle>sd-hwdb</refentrytitle><manvolnum>3</manvolnum></citerefentry> - API instead) and the <constant>udev_queue</constant> object to - query the udev daemon (which should not be used by new software - at all).</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>udev_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_device_new_from_syspath</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_enumerate_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_monitor_new_from_netlink</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_list_entry</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-device</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-hwdb</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/localectl.xml b/man/localectl.xml deleted file mode 100644 index 7def047f62..0000000000 --- a/man/localectl.xml +++ /dev/null @@ -1,221 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="localectl" conditional='ENABLE_LOCALED' - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>localectl</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>localectl</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>localectl</refname> - <refpurpose>Control the system locale and keyboard layout settings</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>localectl</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="req">COMMAND</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>localectl</command> may be used to query and change - the system locale and keyboard layout settings.</para> - - <para>The system locale controls the language settings of system - services and of the UI before the user logs in, such as the - display manager, as well as the default for users after - login.</para> - - <para>The keyboard settings control the keyboard layout used on - the text console and of the graphical UI before the user logs in, - such as the display manager, as well as the default for users - after login.</para> - - <para>Use - <citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry> - to initialize the system locale for mounted (but not booted) - system images.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--no-ask-password</option></term> - - <listitem><para>Do not query the user for authentication for - privileged operations.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--no-convert</option></term> - - <listitem><para>If <command>set-keymap</command> or - <command>set-x11-keymap</command> is invoked and this option - is passed, then the keymap will not be converted from the - console to X11, or X11 to console, - respectively.</para></listitem> - </varlistentry> - - <xi:include href="user-system-options.xml" xpointer="host" /> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - <xi:include href="standard-options.xml" xpointer="no-pager" /> - </variablelist> - - <para>The following commands are understood:</para> - - <variablelist> - <varlistentry> - <term><command>status</command></term> - - <listitem><para>Show current settings of the system locale and - keyboard mapping.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>set-locale LOCALE...</command></term> - - <listitem><para>Set the system locale. This takes one or more - assignments such as "LANG=de_DE.utf8", - "LC_MESSAGES=en_GB.utf8", and so on. See - <citerefentry project='man-pages'><refentrytitle>locale</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details on the available settings and their meanings. Use - <command>list-locales</command> for a list of available - locales (see below). </para></listitem> - </varlistentry> - - <varlistentry> - <term><command>list-locales</command></term> - - <listitem><para>List available locales useful for - configuration with - <command>set-locale</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>set-keymap MAP [TOGGLEMAP]</command></term> - - <listitem><para>Set the system keyboard mapping for the - console and X11. This takes a mapping name (such as "de" or - "us"), and possibly a second one to define a toggle keyboard - mapping. Unless <option>--no-convert</option> is passed, the - selected setting is also applied as the default system - keyboard mapping of X11, after converting it to the closest - matching X11 keyboard mapping. Use - <command>list-keymaps</command> for a list of available - keyboard mappings (see below).</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>list-keymaps</command></term> - - <listitem><para>List available keyboard mappings for the - console, useful for configuration with - <command>set-keymap</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>set-x11-keymap LAYOUT [MODEL [VARIANT [OPTIONS]]]</command></term> - - <listitem><para>Set the system default keyboard mapping for - X11 and the virtual console. This takes a keyboard mapping - name (such as <literal>de</literal> or <literal>us</literal>), - and possibly a model, variant, and options, see - <citerefentry><refentrytitle>kbd</refentrytitle><manvolnum>4</manvolnum></citerefentry> - for details. Unless <option>--no-convert</option> is passed, - the selected setting is also applied as the system console - keyboard mapping, after converting it to the closest matching - console keyboard mapping.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>list-x11-keymap-models</command></term> - <term><command>list-x11-keymap-layouts</command></term> - <term><command>list-x11-keymap-variants [LAYOUT]</command></term> - <term><command>list-x11-keymap-options</command></term> - - <listitem><para>List available X11 keymap models, layouts, - variants and options, useful for configuration with - <command>set-keymap</command>. The command - <command>list-x11-keymap-variants</command> optionally takes a - layout parameter to limit the output to the variants suitable - for the specific layout.</para></listitem> - </varlistentry> - </variablelist> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <xi:include href="less-variables.xml" /> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>locale</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>locale.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>vconsole.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='mankier'><refentrytitle>loadkeys</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>kbd</refentrytitle><manvolnum>4</manvolnum></citerefentry>, - <ulink url="http://www.x.org/releases/current/doc/xorg-docs/input/XKB-Config.html"> - The XKB Configuration Guide - </ulink>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-localed.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/localtime.xml b/man/localtime.xml deleted file mode 100644 index 2827da6e93..0000000000 --- a/man/localtime.xml +++ /dev/null @@ -1,103 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - Copyright 2012 Shawn Landden - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="localtime"> - <refentryinfo> - <title>localtime</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - <author> - <contrib>Developer</contrib> - <firstname>Shawn</firstname> - <surname>Landden</surname> - <email>shawnlandden@gmail.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>localtime</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>localtime</refname> - <refpurpose>Local timezone configuration file</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/localtime</filename> -> <filename>../usr/share/zoneinfo/…</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>The <filename>/etc/localtime</filename> file configures the - system-wide timezone of the local system that is used by - applications for presentation to the user. It should be an - absolute or relative symbolic link pointing to - <filename>/usr/share/zoneinfo/</filename>, followed by a timezone - identifier such as <literal>Europe/Berlin</literal> or - <literal>Etc/UTC</literal>. The resulting link should lead to the - corresponding binary - <citerefentry project='man-pages'><refentrytitle>tzfile</refentrytitle><manvolnum>5</manvolnum></citerefentry> - timezone data for the configured timezone.</para> - - <para>Because the timezone identifier is extracted from the - symlink target name of <filename>/etc/localtime</filename>, this - file may not be a normal file or hardlink.</para> - - <para>The timezone may be overridden for individual programs by - using the <varname>$TZ</varname> environment variable. See - <citerefentry project='man-pages'><refentrytitle>environ</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - - <para>You may use - <citerefentry><refentrytitle>timedatectl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - to change the settings of this file from the command line during - runtime. Use - <citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry> - to initialize the time zone on mounted (but not booted) system - images.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>tzset</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>localtime</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>timedatectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-timedated.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/loginctl.xml b/man/loginctl.xml deleted file mode 100644 index fb51740503..0000000000 --- a/man/loginctl.xml +++ /dev/null @@ -1,459 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="loginctl" conditional='ENABLE_LOGIND' - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>loginctl</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>loginctl</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>loginctl</refname> - <refpurpose>Control the systemd login manager</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>loginctl</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="req">COMMAND</arg> - <arg choice="opt" rep="repeat">NAME</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>loginctl</command> may be used to introspect and - control the state of the - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - login manager - <citerefentry><refentrytitle>systemd-logind.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--no-ask-password</option></term> - - <listitem><para>Do not query the user for authentication for - privileged operations.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-p</option></term> - <term><option>--property=</option></term> - - <listitem><para>When showing session/user/seat properties, - limit display to certain properties as specified as argument. - If not specified, all set properties are shown. The argument - should be a property name, such as - <literal>Sessions</literal>. If specified more than once, all - properties with the specified names are - shown.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--value</option></term> - - <listitem> - <para>When printing properties with <command>show</command>, - only print the value, and skip the property name and - <literal>=</literal>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-a</option></term> - <term><option>--all</option></term> - - <listitem><para>When showing session/user/seat properties, - show all properties regardless of whether they are set or - not.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-l</option></term> - <term><option>--full</option></term> - - <listitem><para>Do not ellipsize process tree entries.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--kill-who=</option></term> - - <listitem><para>When used with - <command>kill-session</command>, choose which processes to - kill. Must be one of <option>leader</option>, or - <option>all</option> to select whether to kill only the leader - process of the session or all processes of the session. If - omitted, defaults to <option>all</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-s</option></term> - <term><option>--signal=</option></term> - - <listitem><para>When used with <command>kill-session</command> - or <command>kill-user</command>, choose which signal to send - to selected processes. Must be one of the well known signal - specifiers, such as <constant>SIGTERM</constant>, - <constant>SIGINT</constant> or <constant>SIGSTOP</constant>. - If omitted, defaults to - <constant>SIGTERM</constant>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-n</option></term> - <term><option>--lines=</option></term> - - <listitem><para>When used with <command>user-status</command> - and <command>session-status</command>, controls the number of - journal lines to show, counting from the most recent ones. - Takes a positive integer argument. Defaults to 10.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-o</option></term> - <term><option>--output=</option></term> - - <listitem><para>When used with <command>user-status</command> - and <command>session-status</command>, controls the formatting - of the journal entries that are shown. For the available - choices, see - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - Defaults to <literal>short</literal>.</para></listitem> - </varlistentry> - - <xi:include href="user-system-options.xml" xpointer="host" /> - <xi:include href="user-system-options.xml" xpointer="machine" /> - - <xi:include href="standard-options.xml" xpointer="no-pager" /> - <xi:include href="standard-options.xml" xpointer="no-legend" /> - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - </refsect1> - - <refsect1> - <title>Commands</title> - - <para>The following commands are understood:</para> - - <refsect2><title>Session Commands</title><variablelist> - - <varlistentry> - <term><command>list-sessions</command></term> - - <listitem><para>List current sessions.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>session-status</command> <optional><replaceable>ID</replaceable>...</optional></term> - - <listitem><para>Show terse runtime status information about - one or more sessions, followed by the most recent log data - from the journal. Takes one or more session identifiers as - parameters. If no session identifiers are passed, the status of - the caller's session is shown. This function is intended to - generate human-readable output. If you are looking for - computer-parsable output, use <command>show-session</command> - instead.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>show-session</command> <optional><replaceable>ID</replaceable>...</optional></term> - - <listitem><para>Show properties of one or more sessions or the - manager itself. If no argument is specified, properties of the - manager will be shown. If a session ID is specified, - properties of the session are shown. By default, empty - properties are suppressed. Use <option>--all</option> to show - those too. To select specific properties to show, use - <option>--property=</option>. This command is intended to be - used whenever computer-parsable output is required. Use - <command>session-status</command> if you are looking for - formatted human-readable output.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>activate</command> <optional><replaceable>ID</replaceable></optional></term> - - <listitem><para>Activate a session. This brings a session into - the foreground if another session is currently in the - foreground on the respective seat. Takes a session identifier - as argument. If no argument is specified, the session of the - caller is put into foreground.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>lock-session</command> <optional><replaceable>ID</replaceable>...</optional></term> - <term><command>unlock-session</command> <optional><replaceable>ID</replaceable>...</optional></term> - - <listitem><para>Activates/deactivates the screen lock on one - or more sessions, if the session supports it. Takes one or - more session identifiers as arguments. If no argument is - specified, the session of the caller is locked/unlocked. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><command>lock-sessions</command></term> - <term><command>unlock-sessions</command></term> - - <listitem><para>Activates/deactivates the screen lock on all - current sessions supporting it. </para></listitem> - </varlistentry> - - <varlistentry> - <term><command>terminate-session</command> <replaceable>ID</replaceable>...</term> - - <listitem><para>Terminates a session. This kills all processes - of the session and deallocates all resources attached to the - session. </para></listitem> - </varlistentry> - - <varlistentry> - <term><command>kill-session</command> <replaceable>ID</replaceable>...</term> - - <listitem><para>Send a signal to one or more processes of the - session. Use <option>--kill-who=</option> to select which - process to kill. Use <option>--signal=</option> to select the - signal to send.</para></listitem> - </varlistentry> - </variablelist></refsect2> - - <refsect2><title>User Commands</title><variablelist> - <varlistentry> - <term><command>list-users</command></term> - - <listitem><para>List currently logged in users. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><command>user-status</command> <optional><replaceable>USER</replaceable>...</optional></term> - - <listitem><para>Show terse runtime status information about - one or more logged in users, followed by the most recent log - data from the journal. Takes one or more user names or numeric - user IDs as parameters. If no parameters are passed, the status - of the caller's user is shown. This function is intended to - generate human-readable output. If you are looking for - computer-parsable output, use <command>show-user</command> - instead. Users may be specified by their usernames or numeric - user IDs. </para></listitem> - </varlistentry> - - <varlistentry> - <term><command>show-user</command> <optional><replaceable>USER</replaceable>...</optional></term> - - <listitem><para>Show properties of one or more users or the - manager itself. If no argument is specified, properties of the - manager will be shown. If a user is specified, properties of - the user are shown. By default, empty properties are - suppressed. Use <option>--all</option> to show those too. To - select specific properties to show, use - <option>--property=</option>. This command is intended to be - used whenever computer-parsable output is required. Use - <command>user-status</command> if you are looking for - formatted human-readable output.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>enable-linger</command> <optional><replaceable>USER</replaceable>...</optional></term> - <term><command>disable-linger</command> <optional><replaceable>USER</replaceable>...</optional></term> - - <listitem><para>Enable/disable user lingering for one or more - users. If enabled for a specific user, a user manager is - spawned for the user at boot and kept around after logouts. - This allows users who are not logged in to run long-running - services. Takes one or more user names or numeric UIDs as - argument. If no argument is specified, enables/disables - lingering for the user of the session of the caller.</para> - - <para>See also <varname>KillUserProcesses=</varname> setting in - <citerefentry><refentrytitle>logind.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><command>terminate-user</command> <replaceable>USER</replaceable>...</term> - - <listitem><para>Terminates all sessions of a user. This kills - all processes of all sessions of the user and deallocates all - runtime resources attached to the user.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>kill-user</command> <replaceable>USER</replaceable>...</term> - - <listitem><para>Send a signal to all processes of a user. Use - <option>--signal=</option> to select the signal to send. - </para></listitem> - </varlistentry> - </variablelist></refsect2> - - <refsect2><title>Seat Commands</title><variablelist> - <varlistentry> - <term><command>list-seats</command></term> - - <listitem><para>List currently available seats on the local - system.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>seat-status</command> <optional><replaceable>NAME</replaceable>...</optional></term> - - <listitem><para>Show terse runtime status information about - one or more seats. Takes one or more seat names as parameters. - If no seat names are passed the status of the caller's - session's seat is shown. This function is intended to generate - human-readable output. If you are looking for - computer-parsable output, use <command>show-seat</command> - instead.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>show-seat</command> <optional><replaceable>NAME</replaceable>...</optional></term> - - <listitem><para>Show properties of one or more seats or the - manager itself. If no argument is specified, properties of the - manager will be shown. If a seat is specified, properties of - the seat are shown. By default, empty properties are - suppressed. Use <option>--all</option> to show those too. To - select specific properties to show, use - <option>--property=</option>. This command is intended to be - used whenever computer-parsable output is required. Use - <command>seat-status</command> if you are looking for - formatted human-readable output.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>attach</command> <replaceable>NAME</replaceable> <replaceable>DEVICE</replaceable>...</term> - - <listitem><para>Persistently attach one or more devices to a - seat. The devices should be specified via device paths in the - <filename>/sys</filename> file system. To create a new seat, - attach at least one graphics card to a previously unused seat - name. Seat names may consist only of a–z, A–Z, 0–9, - <literal>-</literal> and <literal>_</literal> and must be - prefixed with <literal>seat</literal>. To drop assignment of a - device to a specific seat, just reassign it to a different - seat, or use <command>flush-devices</command>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><command>flush-devices</command></term> - - <listitem><para>Removes all device assignments previously - created with <command>attach</command>. After this call, only - automatically generated seats will remain, and all seat - hardware is assigned to them.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>terminate-seat</command> <replaceable>NAME</replaceable>...</term> - - <listitem><para>Terminates all sessions on a seat. This kills - all processes of all sessions on the seat and deallocates all - runtime resources attached to them.</para></listitem> - </varlistentry> - </variablelist></refsect2> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <refsect1> - <title>Examples</title> - - <example> - <title>Querying user status</title> - - <programlisting>$ loginctl user-status -fatima (1005) - Since: Sat 2016-04-09 14:23:31 EDT; 54min ago - State: active - Sessions: 5 *3 - Unit: user-1005.slice - ├─user@1005.service - ... - ├─session-3.scope - ... - └─session-5.scope - ├─3473 login -- fatima - └─3515 -zsh - -Apr 09 14:40:30 laptop login[2325]: pam_unix(login:session): - session opened for user fatima by LOGIN(uid=0) -Apr 09 14:40:30 laptop login[2325]: LOGIN ON tty3 BY fatima -</programlisting> - - <para>There are two sessions, 3 and 5. Session 3 is a graphical session, - marked with a star. The tree of processing including the two corresponding - scope units and the user manager unit are shown.</para> - </example> - </refsect1> - - <xi:include href="less-variables.xml" /> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-logind.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>logind.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/logind.conf.xml b/man/logind.conf.xml deleted file mode 100644 index fe92277a1f..0000000000 --- a/man/logind.conf.xml +++ /dev/null @@ -1,349 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="logind.conf" conditional='ENABLE_LOGIND' - xmlns:xi="http://www.w3.org/2001/XInclude"> - <refentryinfo> - <title>logind.conf</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>logind.conf</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>logind.conf</refname> - <refname>logind.conf.d</refname> - <refpurpose>Login manager configuration files</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/systemd/logind.conf</filename></para> - <para><filename>/etc/systemd/logind.conf.d/*.conf</filename></para> - <para><filename>/run/systemd/logind.conf.d/*.conf</filename></para> - <para><filename>/usr/lib/systemd/logind.conf.d/*.conf</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>These files configure various parameters of the systemd - login manager, - <citerefentry><refentrytitle>systemd-logind.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - </para> - </refsect1> - - <xi:include href="standard-conf.xml" xpointer="main-conf" /> - - <refsect1> - <title>Options</title> - - <para>All options are configured in the - <literal>[Login]</literal> section:</para> - - <variablelist> - - <varlistentry> - <term><varname>NAutoVTs=</varname></term> - - <listitem><para>Takes a positive integer. Configures how many - virtual terminals (VTs) to allocate by default that, when - switched to and are previously unused, - <literal>autovt</literal> services are automatically spawned - on. These services are instantiated from the template unit - <filename>autovt@.service</filename> for the respective VT TTY - name, for example, <filename>autovt@tty4.service</filename>. - By default, <filename>autovt@.service</filename> is linked to - <filename>getty@.service</filename>. In other words, login - prompts are started dynamically as the user switches to unused - virtual terminals. Hence, this parameter controls how many - login <literal>gettys</literal> are available on the VTs. If a - VT is already used by some other subsystem (for example, a - graphical login), this kind of activation will not be - attempted. Note that the VT configured in - <varname>ReserveVT=</varname> is always subject to this kind - of activation, even if it is not one of the VTs configured - with the <varname>NAutoVTs=</varname> directive. Defaults to - 6. When set to 0, automatic spawning of - <literal>autovt</literal> services is - disabled.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ReserveVT=</varname></term> - - <listitem><para>Takes a positive integer. Identifies one - virtual terminal that shall unconditionally be reserved for - <filename>autovt@.service</filename> activation (see above). - The VT selected with this option will be marked busy - unconditionally, so that no other subsystem will allocate it. - This functionality is useful to ensure that, regardless of how - many VTs are allocated by other subsystems, one login - <literal>getty</literal> is always available. Defaults to 6 - (in other words, there will always be a - <literal>getty</literal> available on Alt-F6.). When set to 0, - VT reservation is disabled.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>KillUserProcesses=</varname></term> - - <listitem><para>Takes a boolean argument. Configures whether the processes of a - user should be killed when the user logs out. If true, the scope unit - corresponding to the session and all processes inside that scope will be - terminated. If false, the scope is "abandoned", see - <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - and processes are not killed. Defaults to <literal>yes</literal>, - but see the options <varname>KillOnlyUsers=</varname> and - <varname>KillExcludeUsers=</varname> below.</para> - - <para>In addition to session processes, user process may run under the user - manager unit <filename>user@.service</filename>. Depending on the linger - settings, this may allow users to run processes independent of their login - sessions. See the description of <command>enable-linger</command> in - <citerefentry><refentrytitle>loginctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - </para> - - <para>Note that setting <varname>KillUserProcesses=yes</varname> - will break tools like - <citerefentry project='die-net'><refentrytitle>screen</refentrytitle><manvolnum>1</manvolnum></citerefentry> - and - <citerefentry project='die-net'><refentrytitle>tmux</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - unless they are moved out of the session scope. See example in - <citerefentry><refentrytitle>systemd-run</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>KillOnlyUsers=</varname></term> - <term><varname>KillExcludeUsers=</varname></term> - - <listitem><para>These settings take space-separated lists of usernames that override - the <varname>KillUserProcesses=</varname> setting. A user name may be added to - <varname>KillExcludeUsers=</varname> to exclude the processes in the session scopes of - that user from being killed even if <varname>KillUserProcesses=yes</varname> is set. If - <varname>KillExcludeUsers=</varname> is not set, the <literal>root</literal> user is - excluded by default. <varname>KillExcludeUsers=</varname> may be set to an empty value - to override this default. If a user is not excluded, <varname>KillOnlyUsers=</varname> - is checked next. If this setting is specified, only the session scopes of those users - will be killed. Otherwise, users are subject to the - <varname>KillUserProcesses=yes</varname> setting.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>IdleAction=</varname></term> - - <listitem><para>Configures the action to take when the system - is idle. Takes one of - <literal>ignore</literal>, - <literal>poweroff</literal>, - <literal>reboot</literal>, - <literal>halt</literal>, - <literal>kexec</literal>, - <literal>suspend</literal>, - <literal>hibernate</literal>, - <literal>hybrid-sleep</literal>, and - <literal>lock</literal>. - Defaults to <literal>ignore</literal>.</para> - - <para>Note that this requires that user sessions correctly - report the idle status to the system. The system will execute - the action after all sessions report that they are idle, no - idle inhibitor lock is active, and subsequently, the time - configured with <varname>IdleActionSec=</varname> (see below) - has expired.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>IdleActionSec=</varname></term> - - <listitem><para>Configures the delay after which the action - configured in <varname>IdleAction=</varname> (see above) is - taken after the system is idle.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>InhibitDelayMaxSec=</varname></term> - - <listitem><para>Specifies the maximum time a system shutdown - or sleep request is delayed due to an inhibitor lock of type - <literal>delay</literal> being active before the inhibitor is - ignored and the operation executes anyway. Defaults to - 5.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>HandlePowerKey=</varname></term> - <term><varname>HandleSuspendKey=</varname></term> - <term><varname>HandleHibernateKey=</varname></term> - <term><varname>HandleLidSwitch=</varname></term> - <term><varname>HandleLidSwitchDocked=</varname></term> - - <listitem><para>Controls whether logind shall handle the - system power and sleep keys and the lid switch to trigger - actions such as system power-off or suspend. Can be one of - <literal>ignore</literal>, - <literal>poweroff</literal>, - <literal>reboot</literal>, - <literal>halt</literal>, - <literal>kexec</literal>, - <literal>suspend</literal>, - <literal>hibernate</literal>, - <literal>hybrid-sleep</literal>, and - <literal>lock</literal>. - If <literal>ignore</literal>, logind will never handle these - keys. If <literal>lock</literal>, all running sessions will be - screen-locked; otherwise, the specified action will be taken - in the respective event. Only input devices with the - <literal>power-switch</literal> udev tag will be watched for - key/lid switch events. <varname>HandlePowerKey=</varname> - defaults to <literal>poweroff</literal>. - <varname>HandleSuspendKey=</varname> and - <varname>HandleLidSwitch=</varname> default to - <literal>suspend</literal>. - <varname>HandleLidSwitchDocked=</varname> defaults to - <literal>ignore</literal>. - <varname>HandleHibernateKey=</varname> defaults to - <literal>hibernate</literal>. If the system is inserted in a - docking station, or if more than one display is connected, the - action specified by <varname>HandleLidSwitchDocked=</varname> - occurs; otherwise the <varname>HandleLidSwitch=</varname> - action occurs.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>PowerKeyIgnoreInhibited=</varname></term> - <term><varname>SuspendKeyIgnoreInhibited=</varname></term> - <term><varname>HibernateKeyIgnoreInhibited=</varname></term> - <term><varname>LidSwitchIgnoreInhibited=</varname></term> - - <listitem><para>Controls whether actions triggered by the - power and sleep keys and the lid switch are subject to - inhibitor locks. These settings take boolean arguments. If - <literal>no</literal>, the inhibitor locks taken by - applications in order to block the requested operation are - respected. If <literal>yes</literal>, the requested operation - is executed in any case. - <varname>PowerKeyIgnoreInhibited=</varname>, - <varname>SuspendKeyIgnoreInhibited=</varname> and - <varname>HibernateKeyIgnoreInhibited=</varname> default to - <literal>no</literal>. - <varname>LidSwitchIgnoreInhibited=</varname> defaults to - <literal>yes</literal>. This means that the lid switch does - not respect suspend blockers by default, but the power and - sleep keys do. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>HoldoffTimeoutSec=</varname></term> - - <listitem><para>Specifies the timeout after system startup or - system resume in which systemd will hold off on reacting to - lid events. This is required for the system to properly - detect any hotplugged devices so systemd can ignore lid events - if external monitors, or docks, are connected. If set to 0, - systemd will always react immediately, possibly before the - kernel fully probed all hotplugged devices. This is safe, as - long as you do not care for systemd to account for devices - that have been plugged or unplugged while the system was off. - Defaults to 30s.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RuntimeDirectorySize=</varname></term> - - <listitem><para>Sets the size limit on the - <varname>$XDG_RUNTIME_DIR</varname> runtime directory for each - user who logs in. Takes a size in bytes, optionally suffixed - with the usual K, G, M, and T suffixes, to the base 1024 - (IEC). Alternatively, a numerical percentage suffixed by - <literal>%</literal> may be specified, which sets the size - limit relative to the amount of physical RAM. Defaults to 10%. - Note that this size is a safety limit only. As each runtime - directory is a tmpfs file system, it will only consume as much - memory as is needed.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>InhibitorsMax=</varname></term> - - <listitem><para>Controls the maximum number of concurrent inhibitors to permit. Defaults to 8192 - (8K).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SessionsMax=</varname></term> - - <listitem><para>Controls the maximum number of concurrent user sessions to manage. Defaults to 8192 - (8K). Depending on how the <filename>pam_systemd.so</filename> module is included in the PAM stack - configuration, further login sessions will either be refused, or permitted but not tracked by - <filename>systemd-logind</filename>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>UserTasksMax=</varname></term> - - <listitem><para>Sets the maximum number of OS tasks each user - may run concurrently. This controls the - <varname>TasksMax=</varname> setting of the per-user slice - unit, see - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. Defaults to 12288 (12K).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RemoveIPC=</varname></term> - - <listitem><para>Controls whether System V and POSIX IPC objects belonging to the user shall be removed when the - user fully logs out. Takes a boolean argument. If enabled, the user may not consume IPC resources after the - last of the user's sessions terminated. This covers System V semaphores, shared memory and message queues, as - well as POSIX shared memory and message queues. Note that IPC objects of the root user and other system users - are excluded from the effect of this setting. Defaults to <literal>yes</literal>.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-logind.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>loginctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/machine-id.xml b/man/machine-id.xml deleted file mode 100644 index d318ec54ec..0000000000 --- a/man/machine-id.xml +++ /dev/null @@ -1,146 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="machine-id"> - <refentryinfo> - <title>machine-id</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>machine-id</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>machine-id</refname> - <refpurpose>Local machine ID configuration file</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/machine-id</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>The <filename>/etc/machine-id</filename> file contains the - unique machine ID of the local system that is set during - installation. The machine ID is a single newline-terminated, - hexadecimal, 32-character, lowercase machine ID string. When - decoded from hexadecimal, this corresponds with a 16-byte/128-bit - string.</para> - - <para>The machine ID is usually generated from a random source - during system installation and stays constant for all subsequent - boots. Optionally, for stateless systems, it is generated during - runtime at early boot if it is found to be empty.</para> - - <para>The machine ID does not change based on user configuration - or when hardware is replaced.</para> - - <para>This machine ID adheres to the same format and logic as the - D-Bus machine ID.</para> - - <para>Programs may use this ID to identify the host with a - globally unique ID in the network, which does not change even if - the local network configuration changes. Due to this and its - greater length, it is a more useful replacement for the - <citerefentry project='man-pages'><refentrytitle>gethostid</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call that POSIX specifies.</para> - - <para>The - <citerefentry><refentrytitle>systemd-machine-id-setup</refentrytitle><manvolnum>1</manvolnum></citerefentry> - tool may be used by installer tools to initialize the machine ID - at install time. Use - <citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry> - to initialize it on mounted (but not booted) system images.</para> - - <para>The machine-id may also be set, for example when network - booting, by setting the <varname>systemd.machine_id=</varname> - kernel command line parameter or passing the option - <option>--machine-id=</option> to systemd. A machine-id may not - be set to all zeros.</para> - </refsect1> - - <refsect1> - <title>Relation to OSF UUIDs</title> - - <para>Note that the machine ID historically is not an OSF UUID as - defined by <ulink url="https://tools.ietf.org/html/rfc4122">RFC - 4122</ulink>, nor a Microsoft GUID; however, starting with systemd - v30, newly generated machine IDs do qualify as v4 UUIDs.</para> - - <para>In order to maintain compatibility with existing - installations, an application requiring a UUID should decode the - machine ID, and then apply the following operations to turn it - into a valid OSF v4 UUID. With <literal>id</literal> being an - unsigned character array:</para> - - <programlisting>/* Set UUID version to 4 --- truly random generation */ -id[6] = (id[6] & 0x0F) | 0x40; -/* Set the UUID variant to DCE */ -id[8] = (id[8] & 0x3F) | 0x80;</programlisting> - - <para>(This code is inspired by - <literal>generate_random_uuid()</literal> of - <filename>drivers/char/random.c</filename> from the Linux kernel - sources.)</para> - - </refsect1> - - <refsect1> - <title>History</title> - - <para>The simple configuration file format of - <filename>/etc/machine-id</filename> originates in the - <filename>/var/lib/dbus/machine-id</filename> file introduced by - D-Bus. In fact, this latter file might be a symlink to - <filename>/etc/machine-id</filename>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-machine-id-setup</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>gethostid</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machine-info</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>os-release</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-id128</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_id128_get_machine</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/machine-info.xml b/man/machine-info.xml deleted file mode 100644 index 351133670b..0000000000 --- a/man/machine-info.xml +++ /dev/null @@ -1,185 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="machine-info"> - <refentryinfo> - <title>machine-info</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>machine-info</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>machine-info</refname> - <refpurpose>Local machine information file</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/machine-info</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>The <filename>/etc/machine-info</filename> file contains - machine metadata.</para> - - <para>The basic file format of <filename>machine-info</filename> - is a newline-separated list of environment-like shell-compatible - variable assignments. It is possible to source the configuration - from shell scripts, however, beyond mere variable assignments no - shell features are supported, allowing applications to read the - file without implementing a shell compatible execution - engine.</para> - - <para><filename>/etc/machine-info</filename> contains metadata - about the machine that is set by the user or administrator.</para> - - <para>Depending on the operating system other configuration files - might be checked for machine information as well, however only as - fallback.</para> - - <para>You may use - <citerefentry><refentrytitle>hostnamectl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - to change the settings of this file from the command line.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following machine metadata parameters may be set using - <filename>/etc/machine-info</filename>:</para> - - <variablelist> - - <varlistentry> - <term><varname>PRETTY_HOSTNAME=</varname></term> - - <listitem><para>A pretty human-readable UTF-8 machine - identifier string. This should contain a name like - <literal>Lennart's Laptop</literal> which is useful to present - to the user and does not suffer by the syntax limitations of - internet domain names. If possible, the internet hostname as - configured in <filename>/etc/hostname</filename> should be - kept similar to this one. Example: if this value is - <literal>Lennart's Computer</literal> an Internet hostname of - <literal>lennarts-computer</literal> might be a good choice. - If this parameter is not set, an application should fall back - to the Internet host name for presentation - purposes.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ICON_NAME=</varname></term> - - <listitem><para>An icon identifying this machine according to - the <ulink - url="http://standards.freedesktop.org/icon-naming-spec/icon-naming-spec-latest.html">XDG - Icon Naming Specification</ulink>. If this parameter is not - set, an application should fall back to - <literal>computer</literal> or a similar icon - name.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>CHASSIS=</varname></term> - - <listitem><para>The chassis type. Currently, the following - chassis types are defined: - <literal>desktop</literal>, - <literal>laptop</literal>, - <literal>server</literal>, - <literal>tablet</literal>, - <literal>handset</literal>, - <literal>watch</literal>, and - <literal>embedded</literal>, - as well as the special chassis types - <literal>vm</literal> and - <literal>container</literal> for - virtualized systems that lack an immediate physical chassis. - Note that many systems allow detection of the chassis type - automatically (based on firmware information or suchlike). - This setting (if set) shall take precedence over automatically - detected information and is useful to override misdetected - configuration or to manually configure the chassis type where - automatic detection is not available.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DEPLOYMENT=</varname></term> - - <listitem><para>Describes the system deployment environment. - One of the following is suggested: - <literal>development</literal>, - <literal>integration</literal>, - <literal>staging</literal>, - <literal>production</literal>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>LOCATION=</varname></term> - - <listitem><para>Describes the system location if applicable - and known. Takes a human-friendly, free-form string. This may - be as generic as <literal>Berlin, Germany</literal> or as - specific as <literal>Left Rack, 2nd Shelf</literal>. - </para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Example</title> - - <programlisting>PRETTY_HOSTNAME="Lennart's Tablet" -ICON_NAME=computer-tablet -CHASSIS=tablet -DEPLOYMENT=production</programlisting> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>os-release</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>hostnamectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-hostnamed.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/machinectl.xml b/man/machinectl.xml deleted file mode 100644 index 4b7f9a0391..0000000000 --- a/man/machinectl.xml +++ /dev/null @@ -1,1022 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2013 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="machinectl" conditional='ENABLE_MACHINED' - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>machinectl</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>machinectl</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>machinectl</refname> - <refpurpose>Control the systemd machine manager</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>machinectl</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="req">COMMAND</arg> - <arg choice="opt" rep="repeat">NAME</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>machinectl</command> may be used to introspect and - control the state of the - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - virtual machine and container registration manager - <citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - - <para><command>machinectl</command> may be used to execute - operations on machines and images. Machines in this sense are - considered running instances of:</para> - - <itemizedlist> - <listitem><para>Virtual Machines (VMs) that virtualize hardware - to run full operating system (OS) instances (including their kernels) - in a virtualized environment on top of the host OS.</para></listitem> - - <listitem><para>Containers that share the hardware and - OS kernel with the host OS, in order to run - OS userspace instances on top the host OS.</para></listitem> - - <listitem><para>The host system itself</para></listitem> - </itemizedlist> - - <para>Machines are identified by names that follow the same rules - as UNIX and DNS host names, for details, see below. Machines are - instantiated from disk or file system images that frequently — but not - necessarily — carry the same name as machines running from - them. Images in this sense are considered:</para> - - <itemizedlist> - <listitem><para>Directory trees containing an OS, including its - top-level directories <filename>/usr</filename>, - <filename>/etc</filename>, and so on.</para></listitem> - - <listitem><para>btrfs subvolumes containing OS trees, similar to - normal directory trees.</para></listitem> - - <listitem><para>Binary "raw" disk images containing MBR or GPT - partition tables and Linux file system partitions.</para></listitem> - - <listitem><para>The file system tree of the host OS itself.</para></listitem> - </itemizedlist> - - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>-p</option></term> - <term><option>--property=</option></term> - - <listitem><para>When showing machine or image properties, - limit the output to certain properties as specified by the - argument. If not specified, all set properties are shown. The - argument should be a property name, such as - <literal>Name</literal>. If specified more than once, all - properties with the specified names are - shown.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-a</option></term> - <term><option>--all</option></term> - - <listitem><para>When showing machine or image properties, show - all properties regardless of whether they are set or - not.</para> - - <para>When listing VM or container images, do not suppress - images beginning in a dot character - (<literal>.</literal>).</para> - - <para>When cleaning VM or container images, remove all images, not just hidden ones.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--value</option></term> - - <listitem><para>When printing properties with <command>show</command>, only print the value, - and skip the property name and <literal>=</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-l</option></term> - <term><option>--full</option></term> - - <listitem><para>Do not ellipsize process tree entries.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--no-ask-password</option></term> - - <listitem><para>Do not query the user for authentication for - privileged operations.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--kill-who=</option></term> - - <listitem><para>When used with <command>kill</command>, choose - which processes to kill. Must be one of - <option>leader</option>, or <option>all</option> to select - whether to kill only the leader process of the machine or all - processes of the machine. If omitted, defaults to - <option>all</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-s</option></term> - <term><option>--signal=</option></term> - - <listitem><para>When used with <command>kill</command>, choose - which signal to send to selected processes. Must be one of the - well-known signal specifiers, such as - <constant>SIGTERM</constant>, <constant>SIGINT</constant> or - <constant>SIGSTOP</constant>. If omitted, defaults to - <constant>SIGTERM</constant>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--uid=</option></term> - - <listitem><para>When used with the <command>shell</command> - command, chooses the user ID to open the interactive shell - session as. If this switch is not specified, defaults to - <literal>root</literal>. Note that this switch is not - supported for the <command>login</command> command (see - below).</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-E <replaceable>NAME</replaceable>=<replaceable>VALUE</replaceable></option></term> - <term><option>--setenv=<replaceable>NAME</replaceable>=<replaceable>VALUE</replaceable></option></term> - - <listitem><para>When used with the <command>shell</command> command, sets an environment - variable to pass to the executed shell. Takes an environment variable name and value, - separated by <literal>=</literal>. This switch may be used multiple times to set multiple - environment variables. Note that this switch is not supported for the - <command>login</command> command (see below).</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--mkdir</option></term> - - <listitem><para>When used with <command>bind</command>, creates - the destination directory before applying the bind - mount.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--read-only</option></term> - - <listitem><para>When used with <command>bind</command>, applies - a read-only bind mount.</para> - - <para>When used with <command>clone</command>, <command>import-raw</command> or <command>import-tar</command> a - read-only container or VM image is created.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-n</option></term> - <term><option>--lines=</option></term> - - <listitem><para>When used with <command>status</command>, - controls the number of journal lines to show, counting from - the most recent ones. Takes a positive integer argument. - Defaults to 10.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-o</option></term> - <term><option>--output=</option></term> - - <listitem><para>When used with <command>status</command>, - controls the formatting of the journal entries that are shown. - For the available choices, see - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - Defaults to <literal>short</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--verify=</option></term> - - <listitem><para>When downloading a container or VM image, - specify whether the image shall be verified before it is made - available. Takes one of <literal>no</literal>, - <literal>checksum</literal> and <literal>signature</literal>. - If <literal>no</literal>, no verification is done. If - <literal>checksum</literal> is specified, the download is - checked for integrity after the transfer is complete, but no - signatures are verified. If <literal>signature</literal> is - specified, the checksum is verified and the image's signature - is checked against a local keyring of trustable vendors. It is - strongly recommended to set this option to - <literal>signature</literal> if the server and protocol - support this. Defaults to - <literal>signature</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--force</option></term> - - <listitem><para>When downloading a container or VM image, and - a local copy by the specified local machine name already - exists, delete it first and replace it by the newly downloaded - image.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--format=</option></term> - - <listitem><para>When used with the <option>export-tar</option> - or <option>export-raw</option> commands, specifies the - compression format to use for the resulting file. Takes one of - <literal>uncompressed</literal>, <literal>xz</literal>, - <literal>gzip</literal>, <literal>bzip2</literal>. By default, - the format is determined automatically from the image file - name passed.</para></listitem> - </varlistentry> - - <xi:include href="user-system-options.xml" xpointer="host" /> - <xi:include href="user-system-options.xml" xpointer="machine" /> - - <xi:include href="standard-options.xml" xpointer="no-pager" /> - <xi:include href="standard-options.xml" xpointer="no-legend" /> - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - </refsect1> - - <refsect1> - <title>Commands</title> - - <para>The following commands are understood:</para> - - <refsect2><title>Machine Commands</title><variablelist> - - <varlistentry> - <term><command>list</command></term> - - <listitem><para>List currently running (online) virtual - machines and containers. To enumerate machine images that can - be started, use <command>list-images</command> (see - below). Note that this command hides the special - <literal>.host</literal> machine by default. Use the - <option>--all</option> switch to show it.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>status</command> <replaceable>NAME</replaceable>...</term> - - <listitem><para>Show runtime status information about - one or more virtual machines and containers, followed by the - most recent log data from the journal. This function is - intended to generate human-readable output. If you are looking - for computer-parsable output, use <command>show</command> - instead. Note that the log data shown is reported by the - virtual machine or container manager, and frequently contains - console output of the machine, but not necessarily journal - contents of the machine itself.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>show</command> [<replaceable>NAME</replaceable>...]</term> - - <listitem><para>Show properties of one or more registered - virtual machines or containers or the manager itself. If no - argument is specified, properties of the manager will be - shown. If an NAME is specified, properties of this virtual - machine or container are shown. By default, empty properties - are suppressed. Use <option>--all</option> to show those too. - To select specific properties to show, use - <option>--property=</option>. This command is intended to be - used whenever computer-parsable output is required, and does - not print the cgroup tree or journal entries. Use - <command>status</command> if you are looking for formatted - human-readable output.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>start</command> <replaceable>NAME</replaceable>...</term> - - <listitem><para>Start a container as a system service, using - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - This starts <filename>systemd-nspawn@.service</filename>, - instantiated for the specified machine name, similar to the - effect of <command>systemctl start</command> on the service - name. <command>systemd-nspawn</command> looks for a container - image by the specified name in - <filename>/var/lib/machines/</filename> (and other search - paths, see below) and runs it. Use - <command>list-images</command> (see below) for listing - available container images to start.</para> - - <para>Note that - <citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - also interfaces with a variety of other container and VM - managers, <command>systemd-nspawn</command> is just one - implementation of it. Most of the commands available in - <command>machinectl</command> may be used on containers or VMs - controlled by other managers, not just - <command>systemd-nspawn</command>. Starting VMs and container - images on those managers requires manager-specific - tools.</para> - - <para>To interactively start a container on the command line - with full access to the container's console, please invoke - <command>systemd-nspawn</command> directly. To stop a running - container use <command>machinectl poweroff</command>, see - below.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>login</command> [<replaceable>NAME</replaceable>]</term> - - <listitem><para>Open an interactive terminal login session in - a container or on the local host. If an argument is supplied, - it refers to the container machine to connect to. If none is - specified, or the container name is specified as the empty - string, or the special machine name <literal>.host</literal> - (see below) is specified, the connection is made to the local - host instead. This will create a TTY connection to a specific - container or the local host and asks for the execution of a - getty on it. Note that this is only supported for containers - running - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - as init system.</para> - - <para>This command will open a full login prompt on the - container or the local host, which then asks for username and - password. Use <command>shell</command> (see below) or - <citerefentry><refentrytitle>systemd-run</refentrytitle><manvolnum>1</manvolnum></citerefentry> - with the <option>--machine=</option> switch to directly invoke - a single command, either interactively or in the - background.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>shell</command> [[<replaceable>NAME</replaceable>@]<replaceable>NAME</replaceable> [<replaceable>PATH</replaceable> [<replaceable>ARGUMENTS</replaceable>...]]] </term> - - <listitem><para>Open an interactive shell session in a - container or on the local host. The first argument refers to - the container machine to connect to. If none is specified, or - the machine name is specified as the empty string, or the - special machine name <literal>.host</literal> (see below) is - specified, the connection is made to the local host - instead. This works similar to <command>login</command> but - immediately invokes a user process. This command runs the - specified executable with the specified arguments, or - <filename>/bin/sh</filename> if none is specified. By default, - opens a <literal>root</literal> shell, but by using - <option>--uid=</option>, or by prefixing the machine name with - a username and an <literal>@</literal> character, a different - user may be selected. Use <option>--setenv=</option> to set - environment variables for the executed process.</para> - - <para>When using the <command>shell</command> command without - arguments, (thus invoking the executed shell or command on the - local host), it is in many ways similar to a <citerefentry - project='die-net'><refentrytitle>su</refentrytitle><manvolnum>1</manvolnum></citerefentry> - session, but, unlike <command>su</command>, completely isolates - the new session from the originating session, so that it - shares no process or session properties, and is in a clean and - well-defined state. It will be tracked in a new utmp, login, - audit, security and keyring session, and will not inherit any - environment variables or resource limits, among other - properties.</para> - - <para>Note that - <citerefentry><refentrytitle>systemd-run</refentrytitle><manvolnum>1</manvolnum></citerefentry> - may be used in place of the <command>shell</command> command, - and allows more detailed, low-level configuration of the - invoked unit. However, it is frequently more privileged than - the <command>shell</command> command.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>enable</command> <replaceable>NAME</replaceable>...</term> - <term><command>disable</command> <replaceable>NAME</replaceable>...</term> - - <listitem><para>Enable or disable a container as a system - service to start at system boot, using - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - This enables or disables - <filename>systemd-nspawn@.service</filename>, instantiated for - the specified machine name, similar to the effect of - <command>systemctl enable</command> or <command>systemctl - disable</command> on the service name.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>poweroff</command> <replaceable>NAME</replaceable>...</term> - - <listitem><para>Power off one or more containers. This will - trigger a reboot by sending SIGRTMIN+4 to the container's init - process, which causes systemd-compatible init systems to shut - down cleanly. This operation does not work on containers that - do not run a - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>-compatible - init system, such as sysvinit. Use - <command>terminate</command> (see below) to immediately - terminate a container or VM, without cleanly shutting it - down.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>reboot</command> <replaceable>NAME</replaceable>...</term> - - <listitem><para>Reboot one or more containers. This will - trigger a reboot by sending SIGINT to the container's init - process, which is roughly equivalent to pressing Ctrl+Alt+Del - on a non-containerized system, and is compatible with - containers running any system manager.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>terminate</command> <replaceable>NAME</replaceable>...</term> - - <listitem><para>Immediately terminates a virtual machine or - container, without cleanly shutting it down. This kills all - processes of the virtual machine or container and deallocates - all resources attached to that instance. Use - <command>poweroff</command> to issue a clean shutdown - request.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>kill</command> <replaceable>NAME</replaceable>...</term> - - <listitem><para>Send a signal to one or more processes of the - virtual machine or container. This means processes as seen by - the host, not the processes inside the virtual machine or - container. Use <option>--kill-who=</option> to select which - process to kill. Use <option>--signal=</option> to select the - signal to send.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>bind</command> <replaceable>NAME</replaceable> <replaceable>PATH</replaceable> [<replaceable>PATH</replaceable>]</term> - - <listitem><para>Bind mounts a directory from the host into the - specified container. The first directory argument is the - source directory on the host, the second directory argument - is the destination directory in the container. When the - latter is omitted, the destination path in the container is - the same as the source path on the host. When combined with - the <option>--read-only</option> switch, a ready-only bind - mount is created. When combined with the - <option>--mkdir</option> switch, the destination path is first - created before the mount is applied. Note that this option is - currently only supported for - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry> - containers.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>copy-to</command> <replaceable>NAME</replaceable> <replaceable>PATH</replaceable> [<replaceable>PATH</replaceable>]</term> - - <listitem><para>Copies files or directories from the host - system into a running container. Takes a container name, - followed by the source path on the host and the destination - path in the container. If the destination path is omitted, the - same as the source path is used.</para></listitem> - </varlistentry> - - - <varlistentry> - <term><command>copy-from</command> <replaceable>NAME</replaceable> <replaceable>PATH</replaceable> [<replaceable>PATH</replaceable>]</term> - - <listitem><para>Copies files or directories from a container - into the host system. Takes a container name, followed by the - source path in the container the destination path on the host. - If the destination path is omitted, the same as the source path - is used.</para></listitem> - </varlistentry> - </variablelist></refsect2> - - <refsect2><title>Image Commands</title><variablelist> - - <varlistentry> - <term><command>list-images</command></term> - - <listitem><para>Show a list of locally installed container and - VM images. This enumerates all raw disk images and container - directories and subvolumes in - <filename>/var/lib/machines/</filename> (and other search - paths, see below). Use <command>start</command> (see above) to - run a container off one of the listed images. Note that, by - default, containers whose name begins with a dot - (<literal>.</literal>) are not shown. To show these too, - specify <option>--all</option>. Note that a special image - <literal>.host</literal> always implicitly exists and refers - to the image the host itself is booted from.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>image-status</command> [<replaceable>NAME</replaceable>...]</term> - - <listitem><para>Show terse status information about one or - more container or VM images. This function is intended to - generate human-readable output. Use - <command>show-image</command> (see below) to generate - computer-parsable output instead.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>show-image</command> [<replaceable>NAME</replaceable>...]</term> - - <listitem><para>Show properties of one or more registered - virtual machine or container images, or the manager itself. If - no argument is specified, properties of the manager will be - shown. If an NAME is specified, properties of this virtual - machine or container image are shown. By default, empty - properties are suppressed. Use <option>--all</option> to show - those too. To select specific properties to show, use - <option>--property=</option>. This command is intended to be - used whenever computer-parsable output is required. Use - <command>image-status</command> if you are looking for - formatted human-readable output.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>clone</command> <replaceable>NAME</replaceable> <replaceable>NAME</replaceable></term> - - <listitem><para>Clones a container or VM image. The arguments specify the name of the image to clone and the - name of the newly cloned image. Note that plain directory container images are cloned into btrfs subvolume - images with this command, if the underlying file system supports this. Note that cloning a container or VM - image is optimized for btrfs file systems, and might not be efficient on others, due to file system - limitations.</para> - - <para>Note that this command leaves host name, machine ID and - all other settings that could identify the instance - unmodified. The original image and the cloned copy will hence - share these credentials, and it might be necessary to manually - change them in the copy.</para> - - <para>If combined with the <option>--read-only</option> switch a read-only cloned image is - created.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>rename</command> <replaceable>NAME</replaceable> <replaceable>NAME</replaceable></term> - - <listitem><para>Renames a container or VM image. The - arguments specify the name of the image to rename and the new - name of the image.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>read-only</command> <replaceable>NAME</replaceable> [<replaceable>BOOL</replaceable>]</term> - - <listitem><para>Marks or (unmarks) a container or VM image - read-only. Takes a VM or container image name, followed by a - boolean as arguments. If the boolean is omitted, positive is - implied, i.e. the image is marked read-only.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>remove</command> <replaceable>NAME</replaceable>...</term> - - <listitem><para>Removes one or more container or VM images. - The special image <literal>.host</literal>, which refers to - the host's own directory tree, may not be - removed.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>set-limit</command> [<replaceable>NAME</replaceable>] <replaceable>BYTES</replaceable></term> - - <listitem><para>Sets the maximum size in bytes that a specific - container or VM image, or all images, may grow up to on disk - (disk quota). Takes either one or two parameters. The first, - optional parameter refers to a container or VM image name. If - specified, the size limit of the specified image is changed. If - omitted, the overall size limit of the sum of all images stored - locally is changed. The final argument specifies the size - limit in bytes, possibly suffixed by the usual K, M, G, T - units. If the size limit shall be disabled, specify - <literal>-</literal> as size.</para> - - <para>Note that per-container size limits are only supported - on btrfs file systems. Also note that, if - <command>set-limit</command> is invoked without an image - parameter, and <filename>/var/lib/machines</filename> is - empty, and the directory is not located on btrfs, a btrfs - loopback file is implicitly created as - <filename>/var/lib/machines.raw</filename> with the given - size, and mounted to - <filename>/var/lib/machines</filename>. The size of the - loopback may later be readjusted with - <command>set-limit</command>, as well. If such a - loopback-mounted <filename>/var/lib/machines</filename> - directory is used, <command>set-limit</command> without an image - name alters both the quota setting within the file system as - well as the loopback file and file system size - itself.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>clean</command></term> - - <listitem><para>Remove hidden VM or container images (or all). This command removes all hidden machine images - from <filename>/var/lib/machines</filename>, i.e. those whose name begins with a dot. Use <command>machinectl - list-images --all</command> to see a list of all machine images, including the hidden ones.</para> - - <para>When combined with the <option>--all</option> switch removes all images, not just hidden ones. This - command effectively empties <filename>/var/lib/machines</filename>.</para> - - <para>Note that commands such as <command>machinectl pull-tar</command> or <command>machinectl - pull-raw</command> usually create hidden, read-only, unmodified machine images from the downloaded image first, - before cloning a writable working copy of it, in order to avoid duplicate downloads in case of images that are - reused multiple times. Use <command>machinectl clean</command> to remove old, hidden images created this - way.</para></listitem> - </varlistentry> - - </variablelist></refsect2> - - <refsect2><title>Image Transfer Commands</title><variablelist> - - <varlistentry> - <term><command>pull-tar</command> <replaceable>URL</replaceable> [<replaceable>NAME</replaceable>]</term> - - <listitem><para>Downloads a <filename>.tar</filename> - container image from the specified URL, and makes it available - under the specified local machine name. The URL must be of - type <literal>http://</literal> or - <literal>https://</literal>, and must refer to a - <filename>.tar</filename>, <filename>.tar.gz</filename>, - <filename>.tar.xz</filename> or <filename>.tar.bz2</filename> - archive file. If the local machine name is omitted, it - is automatically derived from the last component of the URL, - with its suffix removed.</para> - - <para>The image is verified before it is made available, - unless <option>--verify=no</option> is specified. Verification - is done via SHA256SUMS and SHA256SUMS.gpg files that need to - be made available on the same web server, under the same URL - as the <filename>.tar</filename> file, but with the last - component (the filename) of the URL replaced. With - <option>--verify=checksum</option>, only the SHA256 checksum - for the file is verified, based on the - <filename>SHA256SUMS</filename> file. With - <option>--verify=signature</option>, the SHA256SUMS file is - first verified with detached GPG signature file - <filename>SHA256SUMS.gpg</filename>. The public key for this - verification step needs to be available in - <filename>/usr/lib/systemd/import-pubring.gpg</filename> or - <filename>/etc/systemd/import-pubring.gpg</filename>.</para> - - <para>The container image will be downloaded and stored in a - read-only subvolume in - <filename>/var/lib/machines/</filename> that is named after - the specified URL and its HTTP etag. A writable snapshot is - then taken from this subvolume, and named after the specified - local name. This behavior ensures that creating multiple - container instances of the same URL is efficient, as multiple - downloads are not necessary. In order to create only the - read-only image, and avoid creating its writable snapshot, - specify <literal>-</literal> as local machine name.</para> - - <para>Note that the read-only subvolume is prefixed with - <filename>.tar-</filename>, and is thus not shown by - <command>list-images</command>, unless <option>--all</option> - is passed.</para> - - <para>Note that pressing C-c during execution of this command - will not abort the download. Use - <command>cancel-transfer</command>, described - below.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>pull-raw</command> <replaceable>URL</replaceable> [<replaceable>NAME</replaceable>]</term> - - <listitem><para>Downloads a <filename>.raw</filename> - container or VM disk image from the specified URL, and makes - it available under the specified local machine name. The URL - must be of type <literal>http://</literal> or - <literal>https://</literal>. The container image must either - be a <filename>.qcow2</filename> or raw disk image, optionally - compressed as <filename>.gz</filename>, - <filename>.xz</filename>, or <filename>.bz2</filename>. If the - local machine name is omitted, it is automatically - derived from the last component of the URL, with its suffix - removed.</para> - - <para>Image verification is identical for raw and tar images - (see above).</para> - - <para>If the downloaded image is in - <filename>.qcow2</filename> format it is converted into a raw - image file before it is made available.</para> - - <para>Downloaded images of this type will be placed as - read-only <filename>.raw</filename> file in - <filename>/var/lib/machines/</filename>. A local, writable - (reflinked) copy is then made under the specified local - machine name. To omit creation of the local, writable copy - pass <literal>-</literal> as local machine name.</para> - - <para>Similar to the behavior of <command>pull-tar</command>, - the read-only image is prefixed with - <filename>.raw-</filename>, and thus not shown by - <command>list-images</command>, unless <option>--all</option> - is passed.</para> - - <para>Note that pressing C-c during execution of this command - will not abort the download. Use - <command>cancel-transfer</command>, described - below.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>import-tar</command> <replaceable>FILE</replaceable> [<replaceable>NAME</replaceable>]</term> - <term><command>import-raw</command> <replaceable>FILE</replaceable> [<replaceable>NAME</replaceable>]</term> - <listitem><para>Imports a TAR or RAW container or VM image, - and places it under the specified name in - <filename>/var/lib/machines/</filename>. When - <command>import-tar</command> is used, the file specified as - the first argument should be a tar archive, possibly compressed - with xz, gzip or bzip2. It will then be unpacked into its own - subvolume in <filename>/var/lib/machines</filename>. When - <command>import-raw</command> is used, the file should be a - qcow2 or raw disk image, possibly compressed with xz, gzip or - bzip2. If the second argument (the resulting image name) is - not specified, it is automatically derived from the file - name. If the file name is passed as <literal>-</literal>, the - image is read from standard input, in which case the second - argument is mandatory.</para> - - <para>Both <command>pull-tar</command> and <command>pull-raw</command> - will resize <filename>/var/lib/machines.raw</filename> and the - filesystem therein as necessary. Optionally, the - <option>--read-only</option> switch may be used to create a - read-only container or VM image. No cryptographic validation - is done when importing the images.</para> - - <para>Much like image downloads, ongoing imports may be listed - with <command>list-transfers</command> and aborted with - <command>cancel-transfer</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>export-tar</command> <replaceable>NAME</replaceable> [<replaceable>FILE</replaceable>]</term> - <term><command>export-raw</command> <replaceable>NAME</replaceable> [<replaceable>FILE</replaceable>]</term> - <listitem><para>Exports a TAR or RAW container or VM image and - stores it in the specified file. The first parameter should be - a VM or container image name. The second parameter should be a - file path the TAR or RAW image is written to. If the path ends - in <literal>.gz</literal>, the file is compressed with gzip, if - it ends in <literal>.xz</literal>, with xz, and if it ends in - <literal>.bz2</literal>, with bzip2. If the path ends in - neither, the file is left uncompressed. If the second argument - is missing, the image is written to standard output. The - compression may also be explicitly selected with the - <option>--format=</option> switch. This is in particular - useful if the second parameter is left unspecified.</para> - - <para>Much like image downloads and imports, ongoing exports - may be listed with <command>list-transfers</command> and - aborted with - <command>cancel-transfer</command>.</para> - - <para>Note that, currently, only directory and subvolume images - may be exported as TAR images, and only raw disk images as RAW - images.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>list-transfers</command></term> - - <listitem><para>Shows a list of container or VM image - downloads, imports and exports that are currently in - progress.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>cancel-transfers</command> <replaceable>ID</replaceable>...</term> - - <listitem><para>Aborts a download, import or export of the - container or VM image with the specified ID. To list ongoing - transfers and their IDs, use - <command>list-transfers</command>. </para></listitem> - </varlistentry> - - </variablelist></refsect2> - - </refsect1> - - <refsect1> - <title>Machine and Image Names</title> - - <para>The <command>machinectl</command> tool operates on machines - and images whose names must be chosen following strict - rules. Machine names must be suitable for use as host names - following a conservative subset of DNS and UNIX/Linux - semantics. Specifically, they must consist of one or more - non-empty label strings, separated by dots. No leading or trailing - dots are allowed. No sequences of multiple dots are allowed. The - label strings may only consist of alphanumeric characters as well - as the dash and underscore. The maximum length of a machine name - is 64 characters.</para> - - <para>A special machine with the name <literal>.host</literal> - refers to the running host system itself. This is useful for execution - operations or inspecting the host system as well. Note that - <command>machinectl list</command> will not show this special - machine unless the <option>--all</option> switch is specified.</para> - - <para>Requirements on image names are less strict, however, they must be - valid UTF-8, must be suitable as file names (hence not be the - single or double dot, and not include a slash), and may not - contain control characters. Since many operations search for an - image by the name of a requested machine, it is recommended to name - images in the same strict fashion as machines.</para> - - <para>A special image with the name <literal>.host</literal> - refers to the image of the running host system. It hence - conceptually maps to the special <literal>.host</literal> machine - name described above. Note that <command>machinectl - list-images</command> will not show this special image either, unless - <option>--all</option> is specified.</para> - </refsect1> - - <refsect1> - <title>Files and Directories</title> - - <para>Machine images are preferably stored in - <filename>/var/lib/machines/</filename>, but are also searched for - in <filename>/usr/local/lib/machines/</filename> and - <filename>/usr/lib/machines/</filename>. For compatibility reasons, - the directory <filename>/var/lib/container/</filename> is - searched, too. Note that images stored below - <filename>/usr</filename> are always considered read-only. It is - possible to symlink machines images from other directories into - <filename>/var/lib/machines/</filename> to make them available for - control with <command>machinectl</command>.</para> - - <para>Note that many image operations are only supported, - efficient or atomic on btrfs file systems. Due to this, if the - <command>pull-tar</command>, <command>pull-raw</command>, - <command>import-tar</command>, <command>import-raw</command> and - <command>set-limit</command> commands notice that - <filename>/var/lib/machines</filename> is empty and not located on - btrfs, they will implicitly set up a loopback file - <filename>/var/lib/machines.raw</filename> containing a btrfs file - system that is mounted to - <filename>/var/lib/machines</filename>. The size of this loopback - file may be controlled dynamically with - <command>set-limit</command>.</para> - - <para>Disk images are understood by - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry> - and <command>machinectl</command> in three formats:</para> - - <itemizedlist> - <listitem><para>A simple directory tree, containing the files - and directories of the container to boot.</para></listitem> - - <listitem><para>Subvolumes (on btrfs file systems), which are - similar to the simple directories, described above. However, - they have additional benefits, such as efficient cloning and - quota reporting.</para></listitem> - - <listitem><para>"Raw" disk images, i.e. binary images of disks - with a GPT or MBR partition table. Images of this type are - regular files with the suffix - <literal>.raw</literal>.</para></listitem> - </itemizedlist> - - <para>See - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry> - for more information on image formats, in particular its - <option>--directory=</option> and <option>--image=</option> - options.</para> - </refsect1> - - <refsect1> - <title>Examples</title> - <example> - <title>Download an Ubuntu image and open a shell in it</title> - - <programlisting># machinectl pull-tar https://cloud-images.ubuntu.com/trusty/current/trusty-server-cloudimg-amd64-root.tar.gz -# systemd-nspawn -M trusty-server-cloudimg-amd64-root</programlisting> - - <para>This downloads and verifies the specified - <filename>.tar</filename> image, and then uses - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry> - to open a shell in it.</para> - </example> - - <example> - <title>Download a Fedora image, set a root password in it, start - it as service</title> - - <programlisting># machinectl pull-raw --verify=no https://dl.fedoraproject.org/pub/fedora/linux/releases/23/Cloud/x86_64/Images/Fedora-Cloud-Base-23-20151030.x86_64.raw.xz -# systemd-nspawn -M Fedora-Cloud-Base-23-20151030 -# passwd -# exit -# machinectl start Fedora-Cloud-Base-23-20151030 -# machinectl login Fedora-Cloud-Base-23-20151030</programlisting> - - <para>This downloads the specified <filename>.raw</filename> - image with verification disabled. Then, a shell is opened in it - and a root password is set. Afterwards the shell is left, and - the machine started as system service. With the last command a - login prompt into the container is requested.</para> - </example> - - <example> - <title>Exports a container image as tar file</title> - - <programlisting># machinectl export-tar fedora myfedora.tar.xz</programlisting> - - <para>Exports the container <literal>fedora</literal> as an - xz-compressed tar file <filename>myfedora.tar.xz</filename> into the - current directory.</para> - </example> - - <example> - <title>Create a new shell session</title> - - <programlisting># machinectl shell --uid=lennart</programlisting> - - <para>This creates a new shell session on the local host for - the user ID <literal>lennart</literal>, in a <citerefentry - project='die-net'><refentrytitle>su</refentrytitle><manvolnum>1</manvolnum></citerefentry>-like - fashion.</para> - </example> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <xi:include href="less-variables.xml" /> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>tar</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>xz</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>gzip</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>bzip2</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/modules-load.d.xml b/man/modules-load.d.xml deleted file mode 100644 index 4b722aa128..0000000000 --- a/man/modules-load.d.xml +++ /dev/null @@ -1,101 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2011 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="modules-load.d" conditional='HAVE_KMOD' - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>modules-load.d</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>modules-load.d</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>modules-load.d</refname> - <refpurpose>Configure kernel modules to load at boot</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/modules-load.d/*.conf</filename></para> - <para><filename>/run/modules-load.d/*.conf</filename></para> - <para><filename>/usr/lib/modules-load.d/*.conf</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><citerefentry><refentrytitle>systemd-modules-load.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - reads files from the above directories which contain kernel - modules to load during boot in a static list. Each configuration - file is named in the style of - <filename>/etc/modules-load.d/<replaceable>program</replaceable>.conf</filename>. - Note that it is usually a better idea to rely on the automatic - module loading by PCI IDs, USB IDs, DMI IDs or similar triggers - encoded in the kernel modules themselves instead of static - configuration like this. In fact, most modern kernel modules are - prepared for automatic loading already.</para> - </refsect1> - - <refsect1> - <title>Configuration Format</title> - - <para>The configuration files should simply contain a list of - kernel module names to load, separated by newlines. Empty lines - and lines whose first non-whitespace character is # or ; are - ignored.</para> - </refsect1> - - <xi:include href="standard-conf.xml" xpointer="confd" /> - - <refsect1> - <title>Example</title> - <example> - <title>/etc/modules-load.d/virtio-net.conf example:</title> - - <programlisting># Load virtio-net.ko at boot -virtio-net</programlisting> - </example> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-modules-load.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-delta</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>modprobe</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/networkctl.xml b/man/networkctl.xml deleted file mode 100644 index 24e1de6986..0000000000 --- a/man/networkctl.xml +++ /dev/null @@ -1,193 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="networkctl" conditional='ENABLE_NETWORKD' - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>networkctl</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Documentation</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>networkctl</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>networkctl</refname> - <refpurpose>Query the status of network links</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>networkctl</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="plain">COMMAND</arg> - <arg choice="opt" rep="repeat">LINK</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>networkctl</command> may be used to introspect the - state of the network links as seen by - <command>systemd-networkd</command>. Please refer to - <citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for an introduction to the basic concepts, functionality, and - configuration syntax.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term> - <option>-a</option> - <option>--all</option> - </term> - - <listitem> - <para>Show all links with <command>status</command>.</para> - </listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - <xi:include href="standard-options.xml" xpointer="no-legend" /> - <xi:include href="standard-options.xml" xpointer="no-pager" /> - - </variablelist> - </refsect1> - - <refsect1> - <title>Commands</title> - - <para>The following commands are understood:</para> - - <variablelist> - <varlistentry> - <term> - <command>list</command> - <optional><replaceable>LINK...</replaceable></optional> - </term> - - <listitem> - <para>Show a list of existing links and their status. If no further arguments are specified shows all links, - otherwise just the specified links. Produces output similar to: - - <programlisting>IDX LINK TYPE OPERATIONAL SETUP - 1 lo loopback carrier unmanaged - 2 eth0 ether routable configured - 3 virbr0 ether no-carrier unmanaged - 4 virbr0-nic ether off unmanaged - -4 links listed.</programlisting></para> - </listitem> - </varlistentry> - - <varlistentry> - <term> - <command>status</command> - <optional><replaceable>LINK...</replaceable></optional> - </term> - - <listitem> - <para>Show information about the specified links: type, - state, kernel module driver, hardware and IP address, - configured DNS servers, etc.</para> - - <para>When no links are specified, an overall network status is shown. Also see the option - <option>--all</option>.</para> - - <para>Produces output similar to: - <programlisting> -● State: routable - Address: 10.193.76.5 on eth0 - 192.168.122.1 on virbr0 - 169.254.190.105 on eth0 - fe80::5054:aa:bbbb:cccc on eth0 - Gateway: 10.193.11.1 (CISCO SYSTEMS, INC.) on eth0 - DNS: 8.8.8.8 - 8.8.4.4</programlisting></para> - </listitem> - - </varlistentry> - - <varlistentry> - <term> - <command>lldp</command> - <optional><replaceable>LINK...</replaceable></optional> - </term> - - <listitem> - <para>Show discovered LLDP (Link Layer Discovery Protocol) neighbors. If one or more link names are specified - only neighbors on those interfaces are shown. Otherwise shows discovered neighbors on all interfaces. Note - that for this feature to work, <varname>LLDP=</varname> must be turned on on the specific interface, see - <citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry> for - details.</para> - - <para>Produces output similar to: - <programlisting>LINK CHASSIS ID SYSTEM NAME CAPS PORT ID PORT DESCRIPTION -enp0s25 00:e0:4c:00:00:00 GS1900 ..b........ 2 Port #2 - -Capability Flags: -o - Other; p - Repeater; b - Bridge; w - WLAN Access Point; r - Router; -t - Telephone; d - DOCSIS cable device; a - Station; c - Customer VLAN; -s - Service VLAN, m - Two-port MAC Relay (TPMR) - -1 neighbors listed.</programlisting></para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure - code otherwise.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.netdev</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> -</refentry> diff --git a/man/networkd.conf.xml b/man/networkd.conf.xml deleted file mode 100644 index 4bfc4f773a..0000000000 --- a/man/networkd.conf.xml +++ /dev/null @@ -1,154 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Vinay Kulkarni - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="networkd.conf" conditional='ENABLE_NETWORKD' - xmlns:xi="http://www.w3.org/2001/XInclude"> - <refentryinfo> - <title>networkd.conf</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Vinay</firstname> - <surname>Kulkarni</surname> - <email>kulkarniv@vmware.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>networkd.conf</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>networkd.conf</refname> - <refname>networkd.conf.d</refname> - <refpurpose>Global Network configuration files</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/systemd/networkd.conf</filename></para> - <para><filename>/etc/systemd/networkd.conf.d/*.conf</filename></para> - <para><filename>/usr/lib/systemd/networkd.conf.d/*.conf</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>These configuration files control global network parameters. - Currently the DHCP Unique Identifier (DUID).</para> - - </refsect1> - - <xi:include href="standard-conf.xml" xpointer="main-conf" /> - - <refsect1> - <title>[DHCP] Section Options</title> - - <para>This section configures the DHCP Unique Identifier (DUID) value used by DHCP - protocol. DHCPv6 client protocol sends the DHCP Unique Identifier and the interface - Identity Association Identifier (IAID) to a DHCP server when acquiring a dynamic IPv6 - address. DHCPv4 client protocol sends IAID and DUID to the DHCP server when acquiring - a dynamic IPv4 address if <option>ClientIdentifier=duid</option>. IAID and DUID allows - a DHCP server to uniquely identify the machine and the interface requesting a DHCP IP. - To configure IAID and ClientIdentifier, see - <citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para> - - <para>The following options are understood:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>DUIDType=</varname></term> - <listitem><para>Specifies how the DUID should be generated. See - <ulink url="https://tools.ietf.org/html/rfc3315#section-9">RFC 3315</ulink> - for a description of all the options.</para> - - <para>The following values are understood: - <variablelist> - <varlistentry> - <term><option>vendor</option> </term> - <listitem><para>If <literal>DUIDType=vendor</literal>, then the DUID value will be generated using - <literal>43793</literal> as the vendor identifier (systemd) and hashed contents of - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - This is the default if <varname>DUIDType=</varname> is not specified. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>link-layer-time</option> </term> - <term><option>link-layer</option> </term> - <term><option>uuid</option> </term> - <listitem><para>Those values are parsed and can be used to set the DUID type - field, but DUID contents must be provided using <varname>DUIDRawData=</varname>. - </para></listitem> - </varlistentry> - </variablelist> - </para> - - <para>In all cases, <varname>DUIDRawData=</varname> can be used to override the - actual DUID value that is used.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DUIDRawData=</varname></term> - <listitem><para>Specifies the DHCP DUID value as a single newline-terminated, hexadecimal string, with each - byte separated by <literal>:</literal>. The DUID that is sent is composed of the DUID type specified by - <varname>DUIDType=</varname> and the value configured here.</para> - - <para>The DUID value specified here overrides the DUID that systemd-networkd generates using the machine-id - from the <filename>/etc/machine-id</filename> file. To configure DUID per-network, see - <citerefentry><refentrytitle>systemd.network </refentrytitle><manvolnum>5</manvolnum></citerefentry>. - The configured DHCP DUID should conform to the specification in - <ulink url="http://tools.ietf.org/html/rfc3315#section-9">RFC 3315</ulink>, - <ulink url="http://tools.ietf.org/html/rfc6355">RFC 6355</ulink>. To configure IAID, see - <citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum> - </citerefentry>.</para> - - <example> - <title>A <option>DUIDType=vendor</option> with a custom value</title> - - <programlisting>DUIDType=vendor -DUIDRawData=00:00:ab:11:f9:2a:c2:77:29:f9:5c:00</programlisting> - - <para>This specifies a 14 byte DUID, with the type DUID-EN (<literal>00:02</literal>), enterprise number - 43793 (<literal>00:00:ab:11</literal>), and identifier value <literal>f9:2a:c2:77:29:f9:5c:00</literal>. - </para> - </example> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/nss-myhostname.xml b/man/nss-myhostname.xml deleted file mode 100644 index a920ec334f..0000000000 --- a/man/nss-myhostname.xml +++ /dev/null @@ -1,148 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2011 Lennart Poettering - Copyright 2013 Tom Gundersen - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="nss-myhostname" conditional='HAVE_MYHOSTNAME'> - - <refentryinfo> - <title>nss-myhostname</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>nss-myhostname</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>nss-myhostname</refname> - <refname>libnss_myhostname.so.2</refname> - <refpurpose>Provide hostname resolution for the locally - configured system hostname.</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>libnss_myhostname.so.2</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>nss-myhostname</command> is a plug-in module for the GNU Name Service Switch (NSS) functionality of - the GNU C Library (<command>glibc</command>), primarily providing hostname resolution for the locally configured - system hostname as returned by - <citerefentry><refentrytitle>gethostname</refentrytitle><manvolnum>2</manvolnum></citerefentry>. The precise - hostnames resolved by this module are:</para> - - <itemizedlist> - <listitem><para>The local, configured hostname is resolved to - all locally configured IP addresses ordered by their scope, or - — if none are configured — the IPv4 address 127.0.0.2 (which - is on the local loopback) and the IPv6 address ::1 (which is the - local host).</para></listitem> - - <listitem><para>The hostnames <literal>localhost</literal> and - <literal>localhost.localdomain</literal> (as well as any hostname - ending in <literal>.localhost</literal> or <literal>.localhost.localdomain</literal>) - are resolved to the IP addresses 127.0.0.1 and ::1.</para></listitem> - - <listitem><para>The hostname <literal>gateway</literal> is - resolved to all current default routing gateway addresses, - ordered by their metric. This assigns a stable hostname to the - current gateway, useful for referencing it independently of the - current network configuration state.</para></listitem> - </itemizedlist> - - <para>Various software relies on an always-resolvable local - hostname. When using dynamic hostnames, this is traditionally - achieved by patching <filename>/etc/hosts</filename> at the same - time as changing the hostname. This is problematic since it - requires a writable <filename>/etc</filename> file system and is - fragile because the file might be edited by the administrator at - the same time. With <command>nss-myhostname</command> enabled, - changing <filename>/etc/hosts</filename> is unnecessary, and on - many systems, the file becomes entirely optional.</para> - - <para>To activate the NSS modules, add <literal>myhostname</literal> to the line starting with - <literal>hosts:</literal> in <filename>/etc/nsswitch.conf</filename>.</para> - - <para>It is recommended to place <literal>myhostname</literal> last in the <filename>nsswitch.conf</filename>' - <literal>hosts:</literal> line to make sure that this mapping is only used as fallback, and that any DNS or - <filename>/etc/hosts</filename> based mapping takes precedence.</para> - </refsect1> - - <refsect1> - <title>Example</title> - - <para>Here is an example <filename>/etc/nsswitch.conf</filename> file that enables - <command>nss-myhostname</command> correctly:</para> - -<programlisting>passwd: compat mymachines -group: compat mymachines -shadow: compat - -hosts: files mymachines resolve <command>myhostname</command> -networks: files - -protocols: db files -services: db files -ethers: db files -rpc: db files - -netgroup: nis</programlisting> - - <para>To test, use <command>glibc</command>'s <command>getent</command> tool:</para> - - <programlisting>$ getent ahosts `hostname` -::1 STREAM omega -::1 DGRAM -::1 RAW -127.0.0.2 STREAM -127.0.0.2 DGRAM -127.0.0.2 RAW</programlisting> - - <para>In this case, the local hostname is <varname>omega</varname>.</para> - - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>nss-resolve</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>nss-mymachines</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>nsswitch.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>getent</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/nss-mymachines.xml b/man/nss-mymachines.xml deleted file mode 100644 index ec047449bf..0000000000 --- a/man/nss-mymachines.xml +++ /dev/null @@ -1,113 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="nss-mymachines" conditional='ENABLE_MACHINED'> - - <refentryinfo> - <title>nss-mymachines</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>nss-mymachines</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>nss-mymachines</refname> - <refname>libnss_mymachines.so.2</refname> - <refpurpose>Provide hostname resolution for local - container instances.</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>libnss_mymachines.so.2</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>nss-mymachines</command> is a plug-in module for the GNU Name Service Switch (NSS) functionality of - the GNU C Library (<command>glibc</command>), providing hostname resolution for the names of containers running - locally that are registered with - <citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>. The - container names are resolved to the IP addresses of the specific container, ordered by their scope. This - functionality only applies to containers using network namespacing.</para> - - <para>The module also resolves user and group IDs used by containers to user and group names indicating the - container name, and back. This functionality only applies to containers using user namespacing.</para> - - <para>To activate the NSS module, add <literal>mymachines</literal> to the lines starting with - <literal>hosts:</literal>, <literal>passwd:</literal> and <literal>group:</literal> in - <filename>/etc/nsswitch.conf</filename>.</para> - - <para>It is recommended to place <literal>mymachines</literal> after the <literal>files</literal> or - <literal>compat</literal> entry of the <filename>/etc/nsswitch.conf</filename> lines to make sure that its mappings - are preferred over other resolvers such as DNS, but so that <filename>/etc/hosts</filename>, - <filename>/etc/passwd</filename> and <filename>/etc/group</filename> based mappings take precedence.</para> - </refsect1> - - <refsect1> - <title>Example</title> - - <para>Here is an example <filename>/etc/nsswitch.conf</filename> file that enables - <command>nss-mymachines</command> correctly:</para> - - <programlisting>passwd: compat <command>mymachines</command> -group: compat <command>mymachines</command> -shadow: compat - -hosts: files <command>mymachines</command> resolve myhostname -networks: files - -protocols: db files -services: db files -ethers: db files -rpc: db files - -netgroup: nis</programlisting> - - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>nss-resolve</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>nss-myhostname</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>nsswitch.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>getent</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/nss-resolve.xml b/man/nss-resolve.xml deleted file mode 100644 index d9e56453e8..0000000000 --- a/man/nss-resolve.xml +++ /dev/null @@ -1,111 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2011 Lennart Poettering - Copyright 2013 Tom Gundersen - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="nss-resolve" conditional='ENABLE_RESOLVED'> - - <refentryinfo> - <title>nss-resolve</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>nss-resolve</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>nss-resolve</refname> - <refname>libnss_resolve.so.2</refname> - <refpurpose>Provide hostname resolution via <filename>systemd-resolved.service</filename></refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>libnss_resolve.so.2</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>nss-resolve</command> is a plug-in module for the GNU Name Service Switch (NSS) functionality of the - GNU C Library (<command>glibc</command>) enabling it to resolve host names via the - <citerefentry><refentrytitle>systemd-resolved</refentrytitle><manvolnum>8</manvolnum></citerefentry> local network - name resolution service. It replaces the <command>nss-dns</command> plug-in module that traditionally resolves - hostnames via DNS.</para> - - <para>To activate the NSS module, add <literal>resolve</literal> to the line starting with - <literal>hosts:</literal> in <filename>/etc/nsswitch.conf</filename>.</para> - - <para>It is recommended to place <literal>resolve</literal> early in <filename>/etc/nsswitch.conf</filename>' - <literal>hosts:</literal> line (but after the <literal>files</literal> or <literal>mymachines</literal> entries), - replacing the <literal>dns</literal> entry if it exists, to ensure DNS queries are always routed via - <citerefentry><refentrytitle>systemd-resolved</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - - <para>Note that <command>nss-resolve</command> will chain-load <command>nss-dns</command> if - <filename>systemd-resolved.service</filename> is not running, ensuring that basic DNS resolution continues to work - if the service is down.</para> - </refsect1> - - <refsect1> - <title>Example</title> - - <para>Here is an example <filename>/etc/nsswitch.conf</filename> file that enables <command>nss-resolve</command> - correctly:</para> - -<programlisting>passwd: compat mymachines -group: compat mymachines -shadow: compat - -hosts: files mymachines <command>resolve</command> myhostname -networks: files - -protocols: db files -services: db files -ethers: db files -rpc: db files - -netgroup: nis</programlisting> - - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-resolved</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>nss-mymachines</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>nss-myhostname</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>nsswitch.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/os-release.xml b/man/os-release.xml deleted file mode 100644 index a70ba1aa31..0000000000 --- a/man/os-release.xml +++ /dev/null @@ -1,362 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="os-release"> - <refentryinfo> - <title>os-release</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>os-release</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>os-release</refname> - <refpurpose>Operating system identification</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/os-release</filename></para> - <para><filename>/usr/lib/os-release</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>The <filename>/etc/os-release</filename> and - <filename>/usr/lib/os-release</filename> files contain operating - system identification data.</para> - - <para>The basic file format of <filename>os-release</filename> is - a newline-separated list of environment-like shell-compatible - variable assignments. It is possible to source the configuration - from shell scripts, however, beyond mere variable assignments, no - shell features are supported (this means variable expansion is - explicitly not supported), allowing applications to read the file - without implementing a shell compatible execution engine. Variable - assignment values must be enclosed in double or single quotes if - they include spaces, semicolons or other special characters - outside of A–Z, a–z, 0–9. Shell special characters ("$", quotes, - backslash, backtick) must be escaped with backslashes, following - shell style. All strings should be in UTF-8 format, and - non-printable characters should not be used. It is not supported - to concatenate multiple individually quoted strings. Lines - beginning with "#" shall be ignored as comments.</para> - - <para>The file <filename>/etc/os-release</filename> takes - precedence over <filename>/usr/lib/os-release</filename>. - Applications should check for the former, and exclusively use its - data if it exists, and only fall back to - <filename>/usr/lib/os-release</filename> if it is missing. - Applications should not read data from both files at the same - time. <filename>/usr/lib/os-release</filename> is the recommended - place to store OS release information as part of vendor trees. - <filename>/etc/os-release</filename> should be a relative symlink - to <filename>/usr/lib/os-release</filename>, to provide - compatibility with applications only looking at - <filename>/etc</filename>. A relative symlink instead of an - absolute symlink is necessary to avoid breaking the link in a - chroot or initrd environment such as dracut.</para> - - <para><filename>os-release</filename> contains data that is - defined by the operating system vendor and should generally not be - changed by the administrator.</para> - - <para>As this file only encodes names and identifiers it should - not be localized.</para> - - <para>The <filename>/etc/os-release</filename> and - <filename>/usr/lib/os-release</filename> files might be symlinks - to other files, but it is important that the file is available - from earliest boot on, and hence must be located on the root file - system.</para> - - <para>For a longer rationale for <filename>os-release</filename> - please refer to the <ulink - url="http://0pointer.de/blog/projects/os-release">Announcement of <filename>/etc/os-release</filename></ulink>.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following OS identifications parameters may be set using - <filename>os-release</filename>:</para> - - <variablelist> - - <varlistentry> - <term><varname>NAME=</varname></term> - - <listitem><para>A string identifying the operating system, - without a version component, and suitable for presentation to - the user. If not set, defaults to - <literal>NAME=GNU/Linux</literal>. Example: - <literal>NAME=BLAG</literal> or <literal>NAME="gNewSense - GNU/Linux"</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>VERSION=</varname></term> - - <listitem><para>A string identifying the operating system - version, excluding any OS name information, possibly including - a release code name, and suitable for presentation to the - user. This field is optional. Example: - <literal>VERSION=210k</literal> or <literal>VERSION="210k - (Spartakus)"</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ID=</varname></term> - - <listitem><para>A lower-case string (no spaces or other - characters outside of 0–9, a–z, ".", "_" and "-") identifying - the operating system, excluding any version information and - suitable for processing by scripts or usage in generated - filenames. If not set, defaults to - <literal>ID=gnu-linux</literal>. Example: - <literal>ID=blag</literal> or - <literal>ID=gnewsense</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ID_LIKE=</varname></term> - - <listitem><para>A space-separated list of operating system - identifiers in the same syntax as the <varname>ID=</varname> - setting. It should list identifiers of operating systems that - are closely related to the local operating system in regards - to packaging and programming interfaces, for example listing - one or more OS identifiers the local OS is a derivative from. - An OS should generally only list other OS identifiers it - itself is a derivative of, and not any OSes that are derived - from it, though symmetric relationships are possible. Build - scripts and similar should check this variable if they need to - identify the local operating system and the value of - <varname>ID=</varname> is not recognized. Operating systems - should be listed in order of how closely the local operating - system relates to the listed ones, starting with the closest. - This field is optional. Example: for an operating system with - <literal>ID=blag</literal>, an assignment of - <literal>ID_LIKE="rhel fedora"</literal> would be appropriate. - For an operating system with <literal>ID=gnewsense</literal>, an - assignment of <literal>ID_LIKE=debian</literal> is - appropriate.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>VERSION_ID=</varname></term> - - <listitem><para>A lower-case string (mostly numeric, no spaces - or other characters outside of 0–9, a–z, ".", "_" and "-") - identifying the operating system version, excluding any OS - name information or release code name, and suitable for - processing by scripts or usage in generated filenames. This - field is optional. Example: <literal>VERSION_ID=210k</literal> - or <literal>VERSION_ID=7.0</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>PRETTY_NAME=</varname></term> - - <listitem><para>A pretty operating system name in a format - suitable for presentation to the user. May or may not contain - a release code name or OS version of some kind, as suitable. - If not set, defaults to - <literal>PRETTY_NAME="GNU/Linux"</literal>. Example: - <literal>PRETTY_NAME="BLAG 210k - (Spartakus)"</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ANSI_COLOR=</varname></term> - - <listitem><para>A suggested presentation color when showing - the OS name on the console. This should be specified as string - suitable for inclusion in the ESC [ m ANSI/ECMA-48 escape code - for setting graphical rendition. This field is optional. - Example: <literal>ANSI_COLOR="0;31"</literal> for red, or - <literal>ANSI_COLOR="1;34"</literal> for light - blue.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>CPE_NAME=</varname></term> - - <listitem><para>A CPE name for the operating system, in URI - binding syntax, following the - <ulink url="http://scap.nist.gov/specifications/cpe/">Common - Platform Enumeration Specification</ulink> as proposed by the - NIST. This field is optional. Example: - <literal>CPE_NAME="cpe:/o:blagblagblag:blag:210k"</literal> - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>HOME_URL=</varname></term> - <term><varname>SUPPORT_URL=</varname></term> - <term><varname>BUG_REPORT_URL=</varname></term> - <term><varname>PRIVACY_POLICY_URL=</varname></term> - - <listitem><para>Links to resources on the Internet related the - operating system. <varname>HOME_URL=</varname> should refer to - the homepage of the operating system, or alternatively some - homepage of the specific version of the operating system. - <varname>SUPPORT_URL=</varname> should refer to the main - support page for the operating system, if there is any. This - is primarily intended for operating systems which vendors - provide support for. <varname>BUG_REPORT_URL=</varname> should - refer to the main bug reporting page for the operating system, - if there is any. This is primarily intended for operating - systems that rely on community QA. - <varname>PRIVACY_POLICY_URL=</varname> should refer to the - main privacy policy page for the operation system, if there is - any. These settings are optional, and providing only some of - these settings is common. These URLs are intended to be - exposed in "About this system" UIs behind links with captions - such as "About this Operating System", "Obtain Support", - "Report a Bug", or "Privacy Policy". The values should be in - <ulink url="https://tools.ietf.org/html/rfc3986">RFC3986 - format</ulink>, and should be <literal>http:</literal> or - <literal>https:</literal> URLs, and possibly - <literal>mailto:</literal> or <literal>tel:</literal>. Only - one URL shall be listed in each setting. If multiple resources - need to be referenced, it is recommended to provide an online - landing page linking all available resources. Examples: - <literal>HOME_URL="https://www.blagblagblag.org/"</literal> and - <literal>BUG_REPORT_URL="https://blag.fsf.org/"</literal></para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>BUILD_ID=</varname></term> - - <listitem><para>A string uniquely identifying the system image - used as the origin for a distribution (it is not updated with - system updates). The field can be identical between different - VERSION_IDs as BUILD_ID is an only a unique identifier to a - specific version. Distributions that release each update as a - new version would only need to use VERSION_ID as each build is - already distinct based on the VERSION_ID. This field is - optional. Example: <literal>BUILD_ID="2013-03-20.3"</literal> - or <literal>BUILD_ID=201303203</literal>. - - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>VARIANT=</varname></term> - - <listitem><para> - A string identifying a specific variant or edition of the - operating system suitable for presentation to the user. This - field may be used to inform the user that the configuration of - this system is subject to a specific divergent set of rules or - default configuration settings. This field is optional and may - not be implemented on all systems. - Examples: - <literal>VARIANT="Server Edition"</literal>, - <literal>VARIANT="Smart Refrigerator Edition"</literal> - Note: this field is for display purposes only. The - <varname>VARIANT_ID</varname> field should be used for making - programmatic decisions. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>VARIANT_ID=</varname></term> - - <listitem><para> - A lower-case string (no spaces or other characters outside of - 0–9, a–z, ".", "_" and "-"), identifying a specific variant or - edition of the operating system. This may be interpreted by - other packages in order to determine a divergent default - configuration. This field is optional and may not be - implemented on all systems. - Examples: - <literal>VARIANT_ID=server</literal>, - <literal>VARIANT_ID=embedded</literal> - </para></listitem> - </varlistentry> - - </variablelist> - - <para>If you are reading this file from C code or a shell script - to determine the OS or a specific version of it, use the - <varname>ID</varname> and <varname>VERSION_ID</varname> fields, - possibly with <varname>ID_LIKE</varname> as fallback for - <varname>ID</varname>. When looking for an OS identification - string for presentation to the user use the - <varname>PRETTY_NAME</varname> field.</para> - - <para>Note that operating system vendors may choose not to provide - version information, for example to accommodate for rolling - releases. In this case, <varname>VERSION</varname> and - <varname>VERSION_ID</varname> may be unset. Applications should - not rely on these fields to be set.</para> - - <para>Operating system vendors may extend the file - format and introduce new fields. It is highly - recommended to prefix new fields with an OS specific - name in order to avoid name clashes. Applications - reading this file must ignore unknown fields. Example: - <literal>DEBIAN_BTS="debbugs://bugs.gnewsense.org/"</literal></para> - </refsect1> - - <refsect1> - <title>Example</title> - - <programlisting>NAME=Parabola -VERSION="rolling-release" -ID=parabola -ID_LIKE=arch -VERSION_ID=rolling-release -PRETTY_NAME="Parabola GNU/Linux-libre" -ANSI_COLOR="1;35" -CPE_NAME="cpe:/o:parabola:parabola:rolling-release" -HOME_URL="https://www.parabola.nu/" -BUG_REPORT_URL="https://labs.parabola.nu/"</programlisting> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>lsb_release</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machine-info</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/pam_systemd.xml b/man/pam_systemd.xml deleted file mode 100644 index ddda81bc90..0000000000 --- a/man/pam_systemd.xml +++ /dev/null @@ -1,296 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="pam_systemd" conditional='HAVE_PAM'> - - <refentryinfo> - <title>pam_systemd</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>pam_systemd</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>pam_systemd</refname> - <refpurpose>Register user sessions in the systemd login manager</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>pam_systemd.so</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>pam_systemd</command> registers user sessions with - the systemd login manager - <citerefentry><refentrytitle>systemd-logind.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - and hence the systemd control group hierarchy.</para> - - <para>On login, this module ensures the following:</para> - - <orderedlist> - <listitem><para>If it does not exist yet, the user runtime - directory <filename>/run/user/$USER</filename> is created and - its ownership changed to the user that is logging - in.</para></listitem> - - <listitem><para>The <varname>$XDG_SESSION_ID</varname> - environment variable is initialized. If auditing is available - and <command>pam_loginuid.so</command> was run before this - module (which is highly recommended), the variable is - initialized from the auditing session id - (<filename>/proc/self/sessionid</filename>). Otherwise, an - independent session counter is used.</para></listitem> - - <listitem><para>A new systemd scope unit is created for the - session. If this is the first concurrent session of the user, an - implicit slice below <filename>user.slice</filename> is - automatically created and the scope placed into it. An instance - of the system service <filename>user@.service</filename>, which - runs the systemd user manager instance, is started. - </para></listitem> - </orderedlist> - - <para>On logout, this module ensures the following:</para> - - <orderedlist> - <listitem><para>If enabled in - <citerefentry><refentrytitle>logind.conf</refentrytitle> - <manvolnum>5</manvolnum></citerefentry>, all processes of the - session are terminated. If the last concurrent session of a user - ends, the user's systemd instance will be terminated too, and so - will the user's slice unit.</para></listitem> - - <listitem><para>If the last concurrent session of a user ends, - the <varname>$XDG_RUNTIME_DIR</varname> directory and all its - contents are removed, too.</para></listitem> - </orderedlist> - - <para>If the system was not booted up with systemd as init system, - this module does nothing and immediately returns - <constant>PAM_SUCCESS</constant>.</para> - - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist class='pam-directives'> - - <varlistentry> - <term><option>class=</option></term> - - <listitem><para>Takes a string argument which sets the session - class. The XDG_SESSION_CLASS environmental variable takes - precedence. One of - <literal>user</literal>, - <literal>greeter</literal>, - <literal>lock-screen</literal> or - <literal>background</literal>. See - <citerefentry><refentrytitle>sd_session_get_class</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for details about the session class.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>type=</option></term> - - <listitem><para>Takes a string argument which sets the session - type. The XDG_SESSION_TYPE environmental variable takes - precedence. One of - <literal>unspecified</literal>, - <literal>tty</literal>, - <literal>x11</literal>, - <literal>wayland</literal> or - <literal>mir</literal>. See - <citerefentry><refentrytitle>sd_session_get_type</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for details about the session type.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>debug<optional>=</optional></option></term> - - <listitem><para>Takes an optional - boolean argument. If yes or without - the argument, the module will log - debugging information as it - operates.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Module Types Provided</title> - - <para>Only <option>session</option> is provided.</para> - </refsect1> - - <refsect1> - <title>Environment</title> - - <para>The following environment variables are set for the - processes of the user's session:</para> - - <variablelist class='environment-variables'> - <varlistentry> - <term><varname>$XDG_SESSION_ID</varname></term> - - <listitem><para>A session identifier, suitable to be used in - filenames. The string itself should be considered opaque, - although often it is just the audit session ID as reported by - <filename>/proc/self/sessionid</filename>. Each ID will be - assigned only once during machine uptime. It may hence be used - to uniquely label files or other resources of this - session.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$XDG_RUNTIME_DIR</varname></term> - - <listitem><para>Path to a user-private user-writable directory - that is bound to the user login time on the machine. It is - automatically created the first time a user logs in and - removed on the user's final logout. If a user logs in twice at - the same time, both sessions will see the same - <varname>$XDG_RUNTIME_DIR</varname> and the same contents. If - a user logs in once, then logs out again, and logs in again, - the directory contents will have been lost in between, but - applications should not rely on this behavior and must be able - to deal with stale files. To store session-private data in - this directory, the user should include the value of - <varname>$XDG_SESSION_ID</varname> in the filename. This - directory shall be used for runtime file system objects such - as <constant>AF_UNIX</constant> sockets, FIFOs, PID files and - similar. It is guaranteed that this directory is local and - offers the greatest possible file system feature set the - operating system provides. For further details, see the <ulink - url="http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html">XDG - Base Directory Specification</ulink>.</para></listitem> - </varlistentry> - - </variablelist> - - <para>The following environment variables are read by the module - and may be used by the PAM service to pass metadata to the - module:</para> - - <variablelist class='environment-variables'> - <varlistentry> - <term><varname>$XDG_SESSION_TYPE</varname></term> - - <listitem><para>The session type. This may be used instead of - <option>session=</option> on the module parameter line, and is - usually preferred.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$XDG_SESSION_CLASS</varname></term> - - <listitem><para>The session class. This may be used instead of - <option>class=</option> on the module parameter line, and is - usually preferred.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$XDG_SESSION_DESKTOP</varname></term> - - <listitem><para>A single, short identifier string for the - desktop environment. This may be used to indicate the session - desktop used, where this applies and if this information is - available. For example: <literal>GNOME</literal>, or - <literal>KDE</literal>. It is recommended to use the same - identifiers and capitalization as for - <varname>$XDG_CURRENT_DESKTOP</varname>, as defined by the - <ulink - url="http://standards.freedesktop.org/desktop-entry-spec/latest/">Desktop - Entry Specification</ulink>. (However, note that - <varname>$XDG_SESSION_DESKTOP</varname> only takes a single - item, and not a colon-separated list like - <varname>$XDG_CURRENT_DESKTOP</varname>.) See - <citerefentry><refentrytitle>sd_session_get_desktop</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for more details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$XDG_SEAT</varname></term> - - <listitem><para>The seat name the session shall be registered - for, if any.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$XDG_VTNR</varname></term> - - <listitem><para>The VT number the session shall be registered - for, if any. (Only applies to seats with a VT available, such - as <literal>seat0</literal>)</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>Example</title> - - <programlisting>#%PAM-1.0 -auth required pam_unix.so -auth required pam_nologin.so -account required pam_unix.so -password required pam_unix.so -session required pam_unix.so -session required pam_loginuid.so -session required pam_systemd.so</programlisting> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-logind.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>logind.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>loginctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>pam.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>pam.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>pam</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>pam_loginuid</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/resolved.conf.xml b/man/resolved.conf.xml deleted file mode 100644 index 920ce9e89b..0000000000 --- a/man/resolved.conf.xml +++ /dev/null @@ -1,219 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Tom Gundersen - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="resolved.conf" conditional='ENABLE_RESOLVED' - xmlns:xi="http://www.w3.org/2001/XInclude"> - <refentryinfo> - <title>resolved.conf</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Tom</firstname> - <surname>Gundersen</surname> - <email>teg@jklm.no</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>resolved.conf</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>resolved.conf</refname> - <refname>resolved.conf.d</refname> - <refpurpose>Network Name Resolution configuration files</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/systemd/resolved.conf</filename></para> - <para><filename>/etc/systemd/resolved.conf.d/*.conf</filename></para> - <para><filename>/run/systemd/resolved.conf.d/*.conf</filename></para> - <para><filename>/usr/lib/systemd/resolved.conf.d/*.conf</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>These configuration files control local DNS and LLMNR - name resolution.</para> - - </refsect1> - - <xi:include href="standard-conf.xml" xpointer="main-conf" /> - - <refsect1> - <title>Options</title> - - <para>The following options are available in the <literal>[Resolve]</literal> section:</para> - - <variablelist class='network-directives'> - - <varlistentry> - <term><varname>DNS=</varname></term> - <listitem><para>A space-separated list of IPv4 and IPv6 addresses to use as system DNS servers. DNS requests - are sent to one of the listed DNS servers in parallel to suitable per-link DNS servers acquired from - <citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> or - set at runtime by external applications. For compatibility reasons, if this setting is not specified, the DNS - servers listed in <filename>/etc/resolv.conf</filename> are used instead, if that file exists and any servers - are configured in it. This setting defaults to the empty list.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>FallbackDNS=</varname></term> - <listitem><para>A space-separated list of IPv4 and IPv6 addresses to use as the fallback DNS servers. Any - per-link DNS servers obtained from - <citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - take precedence over this setting, as do any servers set via <varname>DNS=</varname> above or - <filename>/etc/resolv.conf</filename>. This setting is hence only used if no other DNS server information is - known. If this option is not given, a compiled-in list of DNS servers is used instead.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Domains=</varname></term> - <listitem><para>A space-separated list of domains. These domains are used as search suffixes when resolving - single-label host names (domain names which contain no dot), in order to qualify them into fully-qualified - domain names (FQDNs). Search domains are strictly processed in the order they are specified, until the name - with the suffix appended is found. For compatibility reasons, if this setting is not specified, the search - domains listed in <filename>/etc/resolv.conf</filename> are used instead, if that file exists and any domains - are configured in it. This setting defaults to the empty list.</para> - - <para>Specified domain names may optionally be prefixed with <literal>~</literal>. In this case they do not - define a search path, but preferably direct DNS queries for the indicated domains to the DNS servers configured - with the system <varname>DNS=</varname> setting (see above), in case additional, suitable per-link DNS servers - are known. If no per-link DNS servers are known using the <literal>~</literal> syntax has no effect. Use the - construct <literal>~.</literal> (which is composed of <literal>~</literal> to indicate a routing domain and - <literal>.</literal> to indicate the DNS root domain that is the implied suffix of all DNS domains) to use the - system DNS server defined with <varname>DNS=</varname> preferably for all domains.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>LLMNR=</varname></term> - <listitem><para>Takes a boolean argument or - <literal>resolve</literal>. Controls Link-Local Multicast Name - Resolution support (<ulink - url="https://tools.ietf.org/html/rfc4795">RFC 4794</ulink>) on - the local host. If true, enables full LLMNR responder and - resolver support. If false, disables both. If set to - <literal>resolve</literal>, only resolution support is enabled, - but responding is disabled. Note that - <citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - also maintains per-link LLMNR settings. LLMNR will be - enabled on a link only if the per-link and the - global setting is on.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DNSSEC=</varname></term> - <listitem><para>Takes a boolean argument or - <literal>allow-downgrade</literal>. If true all DNS lookups are - DNSSEC-validated locally (excluding LLMNR and Multicast - DNS). If the response to a lookup request is detected to be invalid - a lookup failure is returned to applications. Note that - this mode requires a DNS server that supports DNSSEC. If the - DNS server does not properly support DNSSEC all validations - will fail. If set to <literal>allow-downgrade</literal> DNSSEC - validation is attempted, but if the server does not support - DNSSEC properly, DNSSEC mode is automatically disabled. Note - that this mode makes DNSSEC validation vulnerable to - "downgrade" attacks, where an attacker might be able to - trigger a downgrade to non-DNSSEC mode by synthesizing a DNS - response that suggests DNSSEC was not supported. If set to - false, DNS lookups are not DNSSEC validated.</para> - - <para>Note that DNSSEC validation requires retrieval of - additional DNS data, and thus results in a small DNS look-up - time penalty.</para> - - <para>DNSSEC requires knowledge of "trust anchors" to prove - data integrity. The trust anchor for the Internet root domain - is built into the resolver, additional trust anchors may be - defined with - <citerefentry><refentrytitle>dnssec-trust-anchors.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - Trust anchors may change at regular intervals, and old trust - anchors may be revoked. In such a case DNSSEC validation is - not possible until new trust anchors are configured locally or - the resolver software package is updated with the new root - trust anchor. In effect, when the built-in trust anchor is - revoked and <varname>DNSSEC=</varname> is true, all further - lookups will fail, as it cannot be proved anymore whether - lookups are correctly signed, or validly unsigned. If - <varname>DNSSEC=</varname> is set to - <literal>allow-downgrade</literal> the resolver will - automatically turn off DNSSEC validation in such a case.</para> - - <para>Client programs looking up DNS data will be informed - whether lookups could be verified using DNSSEC, or whether the - returned data could not be verified (either because the data - was found unsigned in the DNS, or the DNS server did not - support DNSSEC or no appropriate trust anchors were known). In - the latter case it is assumed that client programs employ a - secondary scheme to validate the returned DNS data, should - this be required.</para> - - <para>It is recommended to set <varname>DNSSEC=</varname> to - true on systems where it is known that the DNS server supports - DNSSEC correctly, and where software or trust anchor updates - happen regularly. On other systems it is recommended to set - <varname>DNSSEC=</varname> to - <literal>allow-downgrade</literal>.</para> - - <para>In addition to this global DNSSEC setting - <citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - also maintains per-link DNSSEC settings. For system DNS - servers (see above), only the global DNSSEC setting is in - effect. For per-link DNS servers the per-link - setting is in effect, unless it is unset in which case the - global setting is used instead.</para> - - <para>Site-private DNS zones generally conflict with DNSSEC - operation, unless a negative (if the private zone is not - signed) or positive (if the private zone is signed) trust - anchor is configured for them. If - <literal>allow-downgrade</literal> mode is selected, it is - attempted to detect site-private DNS zones using top-level - domains (TLDs) that are not known by the DNS root server. This - logic does not work in all private zone setups.</para> - - <para>Defaults to off.</para> - </listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-resolved.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>dnssec-trust-anchors.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>resolv.conf</refentrytitle><manvolnum>4</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/runlevel.xml b/man/runlevel.xml deleted file mode 100644 index ca29c7c22c..0000000000 --- a/man/runlevel.xml +++ /dev/null @@ -1,192 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="runlevel" - xmlns:xi="http://www.w3.org/2001/XInclude" - conditional="HAVE_UTMP"> - - <refentryinfo> - <title>runlevel</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>runlevel</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>runlevel</refname> - <refpurpose>Print previous and current SysV runlevel</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>runlevel</command> - <arg choice="opt" rep="repeat">options</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Overview</title> - - <para>"Runlevels" are an obsolete way to start and stop groups of - services used in SysV init. systemd provides a compatibility layer - that maps runlevels to targets, and associated binaries like - <command>runlevel</command>. Nevertheless, only one runlevel can - be "active" at a given time, while systemd can activate multiple - targets concurrently, so the mapping to runlevels is confusing - and only approximate. Runlevels should not be used in new code, - and are mostly useful as a shorthand way to refer the matching - systemd targets in kernel boot parameters.</para> - - <table> - <title>Mapping between runlevels and systemd targets</title> - <tgroup cols='2' align='left' colsep='1' rowsep='1'> - <colspec colname="runlevel" /> - <colspec colname="target" /> - <thead> - <row> - <entry>Runlevel</entry> - <entry>Target</entry> - </row> - </thead> - <tbody> - <row> - <entry>0</entry> - <entry><filename>poweroff.target</filename></entry> - </row> - <row> - <entry>1</entry> - <entry><filename>rescue.target</filename></entry> - </row> - <row> - <entry>2, 3, 4</entry> - <entry><filename>multi-user.target</filename></entry> - </row> - <row> - <entry>5</entry> - <entry><filename>graphical.target</filename></entry> - </row> - <row> - <entry>6</entry> - <entry><filename>reboot.target</filename></entry> - </row> - </tbody> - </tgroup> - </table> - </refsect1> - - <refsect1> - <title>Description</title> - - <para><command>runlevel</command> prints the previous and current - SysV runlevel if they are known.</para> - - <para>The two runlevel characters are separated by a single space - character. If a runlevel cannot be determined, N is printed - instead. If neither can be determined, the word "unknown" is - printed.</para> - - <para>Unless overridden in the environment, this will check the - utmp database for recent runlevel changes.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following option is understood:</para> - - <variablelist> - <varlistentry> - <term><option>--help</option></term> - - <xi:include href="standard-options.xml" xpointer="help-text" /> - </varlistentry> - </variablelist> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>If one or both runlevels could be determined, 0 is returned, - a non-zero failure code otherwise.</para> - - </refsect1> - - <refsect1> - <title>Environment</title> - - <variablelist class='environment-variables'> - <varlistentry> - <term><varname>$RUNLEVEL</varname></term> - - <listitem><para>If <varname>$RUNLEVEL</varname> is set, - <command>runlevel</command> will print this value as current - runlevel and ignore utmp.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$PREVLEVEL</varname></term> - - <listitem><para>If <varname>$PREVLEVEL</varname> is set, - <command>runlevel</command> will print this value as previous - runlevel and ignore utmp.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Files</title> - - <variablelist> - <varlistentry> - <term><filename>/var/run/utmp</filename></term> - - <listitem><para>The utmp database <command>runlevel</command> - reads the previous and current runlevel - from.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd-bus-errors.xml b/man/sd-bus-errors.xml deleted file mode 100644 index d2b81f4e4a..0000000000 --- a/man/sd-bus-errors.xml +++ /dev/null @@ -1,309 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd-bus-errors"> - - <refentryinfo> - <title>sd-bus-errors</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd-bus-errors</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd-bus-errors</refname> - <refname>SD_BUS_ERROR_FAILED</refname> - <refname>SD_BUS_ERROR_NO_MEMORY</refname> - <refname>SD_BUS_ERROR_SERVICE_UNKNOWN</refname> - <refname>SD_BUS_ERROR_NAME_HAS_NO_OWNER</refname> - <refname>SD_BUS_ERROR_NO_REPLY</refname> - <refname>SD_BUS_ERROR_IO_ERROR</refname> - <refname>SD_BUS_ERROR_BAD_ADDRESS</refname> - <refname>SD_BUS_ERROR_NOT_SUPPORTED</refname> - <refname>SD_BUS_ERROR_LIMITS_EXCEEDED</refname> - <refname>SD_BUS_ERROR_ACCESS_DENIED</refname> - <refname>SD_BUS_ERROR_AUTH_FAILED</refname> - <refname>SD_BUS_ERROR_NO_SERVER</refname> - <refname>SD_BUS_ERROR_TIMEOUT</refname> - <refname>SD_BUS_ERROR_NO_NETWORK</refname> - <refname>SD_BUS_ERROR_ADDRESS_IN_USE</refname> - <refname>SD_BUS_ERROR_DISCONNECTED</refname> - <refname>SD_BUS_ERROR_INVALID_ARGS</refname> - <refname>SD_BUS_ERROR_FILE_NOT_FOUND</refname> - <refname>SD_BUS_ERROR_FILE_EXISTS</refname> - <refname>SD_BUS_ERROR_UNKNOWN_METHOD</refname> - <refname>SD_BUS_ERROR_UNKNOWN_OBJECT</refname> - <refname>SD_BUS_ERROR_UNKNOWN_INTERFACE</refname> - <refname>SD_BUS_ERROR_UNKNOWN_PROPERTY</refname> - <refname>SD_BUS_ERROR_PROPERTY_READ_ONLY</refname> - <refname>SD_BUS_ERROR_UNIX_PROCESS_ID_UNKNOWN</refname> - <refname>SD_BUS_ERROR_INVALID_SIGNATURE</refname> - <refname>SD_BUS_ERROR_INCONSISTENT_MESSAGE</refname> - <refname>SD_BUS_ERROR_MATCH_RULE_NOT_FOUND</refname> - <refname>SD_BUS_ERROR_MATCH_RULE_INVALID</refname> - <refname>SD_BUS_ERROR_INTERACTIVE_AUTHORIZATION_REQUIRED</refname> - - <refpurpose>Standard D-Bus error names</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - -<funcsynopsisinfo>#define SD_BUS_ERROR_FAILED "org.freedesktop.DBus.Error.Failed" -#define SD_BUS_ERROR_NO_MEMORY "org.freedesktop.DBus.Error.NoMemory" -#define SD_BUS_ERROR_SERVICE_UNKNOWN "org.freedesktop.DBus.Error.ServiceUnknown" -#define SD_BUS_ERROR_NAME_HAS_NO_OWNER "org.freedesktop.DBus.Error.NameHasNoOwner" -#define SD_BUS_ERROR_NO_REPLY "org.freedesktop.DBus.Error.NoReply" -#define SD_BUS_ERROR_IO_ERROR "org.freedesktop.DBus.Error.IOError" -#define SD_BUS_ERROR_BAD_ADDRESS "org.freedesktop.DBus.Error.BadAddress" -#define SD_BUS_ERROR_NOT_SUPPORTED "org.freedesktop.DBus.Error.NotSupported" -#define SD_BUS_ERROR_LIMITS_EXCEEDED "org.freedesktop.DBus.Error.LimitsExceeded" -#define SD_BUS_ERROR_ACCESS_DENIED "org.freedesktop.DBus.Error.AccessDenied" -#define SD_BUS_ERROR_AUTH_FAILED "org.freedesktop.DBus.Error.AuthFailed" -#define SD_BUS_ERROR_NO_SERVER "org.freedesktop.DBus.Error.NoServer" -#define SD_BUS_ERROR_TIMEOUT "org.freedesktop.DBus.Error.Timeout" -#define SD_BUS_ERROR_NO_NETWORK "org.freedesktop.DBus.Error.NoNetwork" -#define SD_BUS_ERROR_ADDRESS_IN_USE "org.freedesktop.DBus.Error.AddressInUse" -#define SD_BUS_ERROR_DISCONNECTED "org.freedesktop.DBus.Error.Disconnected" -#define SD_BUS_ERROR_INVALID_ARGS "org.freedesktop.DBus.Error.InvalidArgs" -#define SD_BUS_ERROR_FILE_NOT_FOUND "org.freedesktop.DBus.Error.FileNotFound" -#define SD_BUS_ERROR_FILE_EXISTS "org.freedesktop.DBus.Error.FileExists" -#define SD_BUS_ERROR_UNKNOWN_METHOD "org.freedesktop.DBus.Error.UnknownMethod" -#define SD_BUS_ERROR_UNKNOWN_OBJECT "org.freedesktop.DBus.Error.UnknownObject" -#define SD_BUS_ERROR_UNKNOWN_INTERFACE "org.freedesktop.DBus.Error.UnknownInterface" -#define SD_BUS_ERROR_UNKNOWN_PROPERTY "org.freedesktop.DBus.Error.UnknownProperty" -#define SD_BUS_ERROR_PROPERTY_READ_ONLY "org.freedesktop.DBus.Error.PropertyReadOnly" -#define SD_BUS_ERROR_UNIX_PROCESS_ID_UNKNOWN "org.freedesktop.DBus.Error.UnixProcessIdUnknown" -#define SD_BUS_ERROR_INVALID_SIGNATURE "org.freedesktop.DBus.Error.InvalidSignature" -#define SD_BUS_ERROR_INCONSISTENT_MESSAGE "org.freedesktop.DBus.Error.InconsistentMessage" -#define SD_BUS_ERROR_MATCH_RULE_NOT_FOUND "org.freedesktop.DBus.Error.MatchRuleNotFound" -#define SD_BUS_ERROR_MATCH_RULE_INVALID "org.freedesktop.DBus.Error.MatchRuleInvalid" -#define SD_BUS_ERROR_INTERACTIVE_AUTHORIZATION_REQUIRED \ - "org.freedesktop.DBus.Error.InteractiveAuthorizationRequired"</funcsynopsisinfo> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>In addition to the error names user programs define, D-Bus - knows a number of generic, standardized error names that are - listed below.</para> - - <para>In addition to this list, in sd-bus, the special error - namespace <literal>System.Error.</literal> is used to map - arbitrary GNU/Linux system errors (as defined by <citerefentry - project='man-pages'><refentrytitle>errno</refentrytitle><manvolnum>3</manvolnum></citerefentry>) - to D-Bus errors and back. For example, the error - <constant>EUCLEAN</constant> is mapped to - <literal>System.Error.EUCLEAN</literal> and back.</para> - - <variablelist> - - <varlistentry> - <term><varname>SD_BUS_ERROR_FAILED</varname></term> - <listitem><para>A generic error indication. See the error - message for further details. This error name should be - avoided, in favor of a more expressive error - name.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SD_BUS_ERROR_NO_MEMORY</varname></term> - <listitem><para>A memory allocation failed, and the requested - operation could not be completed.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SD_BUS_ERROR_SERVICE_UNKNOWN</varname></term> - <listitem><para>The contacted bus service is unknown and - cannot be activated.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SD_BUS_ERROR_NAME_HAS_NO_OWNER</varname></term> - <listitem><para>The specified bus service name currently has - no owner.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_NO_REPLY</varname></term> - <listitem><para>A message did not receive a reply. This error - is usually generated after a timeout.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_IO_ERROR</varname></term> - <listitem><para>Generic input/output error, for example when - accessing a socket or other I/O context.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_BAD_ADDRESS</varname></term> - <listitem><para>The specified D-Bus bus address string is - malformed.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_NOT_SUPPORTED</varname></term> - <listitem><para>The requested operation is not supported on - the local system.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_LIMITS_EXCEEDED</varname></term> - <listitem><para>Some limited resource has been - exhausted.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_ACCESS_DENIED</varname></term> - <listitem><para>Access to a resource has been denied due to security restrictions.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_AUTH_FAILED</varname></term> - <listitem><para>Authentication did not complete successfully.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_NO_SERVER</varname></term> - <listitem><para>Unable to connect to the specified server.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_TIMEOUT</varname></term> - <listitem><para>An operation timed out. Note that method calls - which timeout generate a - <varname>SD_BUS_ERROR_NO_REPLY</varname>.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_NO_NETWORK</varname></term> - <listitem><para>No network available to execute requested network operation on.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_ADDRESS_IN_USE</varname></term> - <listitem><para>The specified network address is already being listened on.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_DISCONNECTED</varname></term> - <listitem><para>The connection has been terminated.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_INVALID_ARGS</varname></term> - <listitem><para>One or more invalid arguments have been passed.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_FILE_NOT_FOUND</varname></term> - <listitem><para>The requested file could not be found.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_FILE_EXISTS</varname></term> - <listitem><para>The requested file already exists.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_UNKNOWN_METHOD</varname></term> - <listitem><para>The requested method does not exist in the selected interface.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_UNKNOWN_OBJECT</varname></term> - <listitem><para>The requested object does not exist in the selected service.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_UNKNOWN_INTERFACE</varname></term> - <listitem><para>The requested interface does not exist on the selected object.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_UNKNOWN_PROPERTY</varname></term> - <listitem><para>The requested property does not exist in the selected interface.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_PROPERTY_READ_ONLY</varname></term> - <listitem><para>A write operation was requested on a read-only property.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_UNIX_PROCESS_ID_UNKNOWN</varname></term> - <listitem><para>The requested PID is not known.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_INVALID_SIGNATURE</varname></term> - <listitem><para>The specified message signature is not - valid.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_INCONSISTENT_MESSAGE</varname></term> - <listitem><para>The passed message does not validate - correctly.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_MATCH_RULE_NOT_FOUND</varname></term> - <listitem><para>The specified match rule does not exist.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_MATCH_RULE_INVALID</varname></term> - <listitem><para>The specified match rule is invalid.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SD_BUS_ERROR_INTERACTIVE_AUTHORIZATION_REQUIRED</varname></term> - <listitem><para>Access to the requested operation is not - permitted. However, it might be available after interactive - authentication. This is usually returned by method calls - supporting a framework for additional interactive - authorization, when interactive authorization was not enabled - with the - <citerefentry><refentrytitle>sd_bus_message_set_allow_interactive_authorization</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for the method call message.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The various error definitions described here are available - as a shared library, which can be compiled and linked to with the - <constant>libsystemd</constant> <citerefentry - project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_error</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_set_allow_interactive_authorization</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>errno</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>strerror</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd-bus.xml b/man/sd-bus.xml deleted file mode 100644 index 336dd33ea0..0000000000 --- a/man/sd-bus.xml +++ /dev/null @@ -1,123 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2016 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd-bus" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd-bus</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Documentation</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd-bus</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd-bus</refname> - <refpurpose>A lightweight D-Bus and kdbus client library</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - </funcsynopsis> - - <cmdsynopsis> - <command>pkg-config --cflags --libs libsystemd</command> - </cmdsynopsis> - - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>sd-bus.h</filename> provides an implementation - of a D-Bus client. It can interoperate both with the traditional - <citerefentry project='man-pages'><refentrytitle>dbus-daemon</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - and with kdbus. See - <ulink url="http://www.freedesktop.org/software/dbus/" /> - for more information about the big picture. - </para> - - <important> - <para>Interfaces described here have not been declared stable yet, - and are not accessible from <filename>libsystemd.so</filename>. - This documentation is provided in hope it might be useful for - developers, without any guarantees of availability or stability. - </para> - </important> - - <para>See - <citerefentry><refentrytitle>sd_bus_default</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_request_name</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_start</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_append</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_append_basic</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_append_array</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_append_string_memfd</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_append_strv</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_can_send</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_get_cookie</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_get_monotonic_usec</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_send</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_set_address</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_set_description</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_set_prepare</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_creds_get_pid</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_creds_new_from_pid</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_get_name_creds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_get_owner_creds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_negotiate_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_path_encode</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus-errors</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_error</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_error_add_map</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_set_allow_interactive_authorization</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for more information about the functions available.</para> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>dbus-daemon</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>dbus-send</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <ulink url="https://developer.gnome.org/gio/stable/gdbus.html">gdbus</ulink> - </para> - </refsect1> - -</refentry> diff --git a/man/sd-daemon.xml b/man/sd-daemon.xml deleted file mode 100644 index b06d99f346..0000000000 --- a/man/sd-daemon.xml +++ /dev/null @@ -1,144 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd-daemon" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd-daemon</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd-daemon</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd-daemon</refname> - <refname>SD_EMERG</refname> - <refname>SD_ALERT</refname> - <refname>SD_CRIT</refname> - <refname>SD_ERR</refname> - <refname>SD_WARNING</refname> - <refname>SD_NOTICE</refname> - <refname>SD_INFO</refname> - <refname>SD_DEBUG</refname> - <refpurpose>APIs for - new-style daemons</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-daemon.h></funcsynopsisinfo> - </funcsynopsis> - - <cmdsynopsis> - <command>pkg-config --cflags --libs libsystemd</command> - </cmdsynopsis> - - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>sd-daemon.h</filename> provides APIs for new-style - daemons, as implemented by the - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - service manager.</para> - - <para>See - <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_booted</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_is_fifo</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_watchdog_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for more information about the functions implemented. In addition - to these functions, a couple of logging prefixes are defined as - macros:</para> - - <programlisting>#define SD_EMERG "<0>" /* system is unusable */ -#define SD_ALERT "<1>" /* action must be taken immediately */ -#define SD_CRIT "<2>" /* critical conditions */ -#define SD_ERR "<3>" /* error conditions */ -#define SD_WARNING "<4>" /* warning conditions */ -#define SD_NOTICE "<5>" /* normal but significant condition */ -#define SD_INFO "<6>" /* informational */ -#define SD_DEBUG "<7>" /* debug-level messages */</programlisting> - - <para>These prefixes are intended to be used in conjunction with - stderr-based logging as implemented by systemd. If a systemd - service definition file is configured with - <varname>StandardError=journal</varname>, - <varname>StandardError=syslog</varname> or - <varname>StandardError=kmsg</varname>, these prefixes can be used - to encode a log level in lines printed. This is similar to the - kernel <function>printk()</function>-style logging. See - <citerefentry><refentrytitle>klogctl</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for more information.</para> - - <para>The log levels are identical to - <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry>'s - log level system. To use these prefixes simply prefix every line - with one of these strings. A line that is not prefixed will be - logged at the default log level SD_INFO.</para> - - <example> - <title>Hello World</title> - - <para>A daemon may log with the log level NOTICE by issuing this - call:</para> - - <programlisting>fprintf(stderr, SD_NOTICE "Hello World!\n");</programlisting> - </example> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_booted</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_is_fifo</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_watchdog_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>fprintf</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd-event.xml b/man/sd-event.xml deleted file mode 100644 index fc615f0906..0000000000 --- a/man/sd-event.xml +++ /dev/null @@ -1,187 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd-event" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd-event</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd-event</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd-event</refname> - <refpurpose>A generic event loop implementation</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - </funcsynopsis> - - <cmdsynopsis> - <command>pkg-config --cflags --libs libsystemd</command> - </cmdsynopsis> - - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>sd-event.h</filename> provides a generic event - loop implementation, based on Linux <citerefentry - project='man-pages'><refentrytitle>epoll</refentrytitle><manvolnum>7</manvolnum></citerefentry>. - </para> - - <para>See - <citerefentry><refentrytitle>sd_event_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_run</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_unref</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_priority</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_userdata</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_get_event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_get_pending</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_description</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_prepare</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_wait</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_get_fd</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_set_watchdog</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_now</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for more information about the functions available.</para> - - <para>The event loop design is targeted on running a separate - instance of the event loop in each thread; it has no concept of - distributing events from a single event loop instance onto - multiple worker threads. Dispatching events is strictly ordered - and subject to configurable priorities. In each event loop - iteration a single event source is dispatched. Each time an event - source is dispatched the kernel is polled for new events, before - the next event source is dispatched. The event loop is designed to - honour priorities and provide fairness within each priority. It is - not designed to provide optimal throughput, as this contradicts - these goals due the limitations of the underlying <citerefentry - project='man-pages'><refentrytitle>epoll</refentrytitle><manvolnum>7</manvolnum></citerefentry> - primitives.</para> - - <para>The event loop implementation provides the following features:</para> - - <orderedlist> - <listitem><para>I/O event sources, based on <citerefentry - project='man-pages'><refentrytitle>epoll</refentrytitle><manvolnum>7</manvolnum></citerefentry>'s - file descriptor watching, including edge triggered events (<constant>EPOLLET</constant>). See <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para></listitem> - - <listitem><para>Timer event sources, based on <citerefentry - project='man-pages'><refentrytitle>timerfd_create</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - supporting the <constant>CLOCK_MONOTONIC</constant>, - <constant>CLOCK_REALTIME</constant>, - <constant>CLOCK_BOOTIME</constant> clocks, as well as the - <constant>CLOCK_REALTIME_ALARM</constant> and - <constant>CLOCK_BOOTTIME_ALARM</constant> clocks that can resume - the system from suspend. When creating timer events a required - accuracy parameter may be specified which allows coalescing of - timer events to minimize power consumption. See <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para></listitem> - - <listitem><para>UNIX process signal events, based on - <citerefentry - project='man-pages'><refentrytitle>signalfd</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - including full support for real-time signals, and queued parameters. See <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para></listitem> - - <listitem><para>Child process state change events, based on - <citerefentry project='man-pages'><refentrytitle>waitid</refentrytitle><manvolnum>2</manvolnum></citerefentry>. See <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para></listitem> - - <listitem><para>Static event sources, of three types: defer, - post and exit, for invoking calls in each event loop, after - other event sources or at event loop termination. See - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para></listitem> - - <listitem><para>Event sources may be assigned a 64bit priority - value, that controls the order in which event sources are - dispatched if multiple are pending simultaneously. See - <citerefentry><refentrytitle>sd_event_source_set_priority</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para></listitem> - - <listitem><para>The event loop may automatically send watchdog - notification messages to the service manager. See - <citerefentry><refentrytitle>sd_event_set_watchdog</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para></listitem> - - <listitem><para>The event loop may be integrated into foreign - event loops, such as the GLib one. See - <citerefentry><refentrytitle>sd_event_get_fd</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for an example.</para></listitem> - </orderedlist> - - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_run</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_unref</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_priority</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_userdata</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_get_event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_get_pending</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_description</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_prepare</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_wait</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_get_fd</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_set_watchdog</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_now</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>epoll</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>timerfd_create</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>signalfd</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>waitid</refentrytitle><manvolnum>2</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd-id128.xml b/man/sd-id128.xml deleted file mode 100644 index ea7972055d..0000000000 --- a/man/sd-id128.xml +++ /dev/null @@ -1,166 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd-id128" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd-id128</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd-id128</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd-id128</refname> - <refname>sd_id128_t</refname> - <refname>SD_ID128_MAKE</refname> - <refname>SD_ID128_CONST_STR</refname> - <refname>SD_ID128_FORMAT_STR</refname> - <refname>SD_ID128_FORMAT_VAL</refname> - <refname>sd_id128_equal</refname> - <refpurpose>APIs for processing 128-bit IDs</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-id128.h></funcsynopsisinfo> - </funcsynopsis> - - <cmdsynopsis> - <command>pkg-config --cflags --libs libsystemd</command> - </cmdsynopsis> - - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>sd-id128.h</filename> provides APIs to process and - generate 128-bit ID values. The 128-bit ID values processed and - generated by these APIs are a generalization of OSF UUIDs as - defined by <ulink url="https://tools.ietf.org/html/rfc4122">RFC - 4122</ulink> but use a simpler string format. These functions - impose no structure on the used IDs, much unlike OSF UUIDs or - Microsoft GUIDs, but are fully compatible with those types of IDs. - </para> - - <para>See - <citerefentry><refentrytitle>sd_id128_to_string</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_id128_randomize</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>sd_id128_get_machine</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for more information about the implemented functions.</para> - - <para>A 128-bit ID is implemented as the following - union type:</para> - - <programlisting>typedef union sd_id128 { - uint8_t bytes[16]; - uint64_t qwords[2]; -} sd_id128_t;</programlisting> - - <para>This union type allows accessing the 128-bit ID as 16 - separate bytes or two 64-bit words. It is generally safer to - access the ID components by their 8-bit array to avoid endianness - issues. This union is intended to be passed call-by-value (as - opposed to call-by-reference) and may be directly manipulated by - clients.</para> - - <para>A couple of macros are defined to denote and decode 128-bit - IDs:</para> - - <para><function>SD_ID128_MAKE()</function> may be used to denote a - constant 128-bit ID in source code. A commonly used idiom is to - assign a name to a 128-bit ID using this macro:</para> - - <programlisting>#define SD_MESSAGE_COREDUMP SD_ID128_MAKE(fc,2e,22,bc,6e,e6,47,b6,b9,07,29,ab,34,a2,50,b1)</programlisting> - - <para><function>SD_ID128_CONST_STR()</function> may be used to - convert constant 128-bit IDs into constant strings for output. The - following example code will output the string - "fc2e22bc6ee647b6b90729ab34a250b1":</para> - <programlisting>int main(int argc, char *argv[]) { - puts(SD_ID128_CONST_STR(SD_MESSAGE_COREDUMP)); -}</programlisting> - - <para><function>SD_ID128_FORMAT_STR</function> and - <function>SD_ID128_FORMAT_VAL()</function> may be used to format a - 128-bit ID in a - <citerefentry project='man-pages'><refentrytitle>printf</refentrytitle><manvolnum>3</manvolnum></citerefentry> - format string, as shown in the following example:</para> - - <programlisting>int main(int argc, char *argv[]) { - sd_id128_t id; - id = SD_ID128_MAKE(ee,89,be,71,bd,6e,43,d6,91,e6,c5,5d,eb,03,02,07); - printf("The ID encoded in this C file is " SD_ID128_FORMAT_STR ".\n", SD_ID128_FORMAT_VAL(id)); - return 0; -}</programlisting> - - <para>Use <function>sd_id128_equal()</function> to compare two 128-bit IDs:</para> - - <programlisting>int main(int argc, char *argv[]) { - sd_id128_t a, b, c; - a = SD_ID128_MAKE(ee,89,be,71,bd,6e,43,d6,91,e6,c5,5d,eb,03,02,07); - b = SD_ID128_MAKE(f2,28,88,9c,5f,09,44,15,9d,d7,04,77,58,cb,e7,3e); - c = a; - assert(sd_id128_equal(a, c)); - assert(!sd_id128_equal(a, b)); - return 0; -}</programlisting> - - <para>Note that new, randomized IDs may be generated with - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s - <option>--new-id</option> option.</para> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_id128_to_string</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_id128_randomize</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_id128_get_machine</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>printf</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd-journal.xml b/man/sd-journal.xml deleted file mode 100644 index 09747a480c..0000000000 --- a/man/sd-journal.xml +++ /dev/null @@ -1,133 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd-journal" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd-journal</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd-journal</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd-journal</refname> - <refpurpose>APIs for submitting and querying log entries to and - from the journal</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-journal.h></funcsynopsisinfo> - </funcsynopsis> - - <cmdsynopsis> - <command>pkg-config --cflags --libs libsystemd</command> - </cmdsynopsis> - - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>sd-journal.h</filename> provides APIs to submit - and query log entries. The APIs exposed act both as client for the - <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - journal service and as parser for the journal files on disk. - </para> - - <para>See - <citerefentry><refentrytitle>sd_journal_print</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_stream_fd</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_open</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_realtime_usec</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_add_match</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_seek_head</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_query_enumerate</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_enumerate_fields</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_cursor</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_cutoff_realtime_usec</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_cutoff_monotonic_usec</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_usage</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_catalog</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_fd</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_has_runtime_files</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>sd_journal_has_persistent_files</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for more information about the functions implemented.</para> - - <para>Command line access for submitting entries to the journal is - available with the - <citerefentry><refentrytitle>systemd-cat</refentrytitle><manvolnum>1</manvolnum></citerefentry> - tool. Command line access for querying entries from the journal is - available with the - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - tool.</para> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_print</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_stream_fd</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_open</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_data</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_realtime_usec</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_add_match</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_seek_head</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_query_enumerate</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_enumerate_fields</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_cursor</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_cutoff_realtime_usec</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_cutoff_monotonic_usec</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_usage</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_fd</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_query_unique</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_catalog</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_has_runtime_files</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_has_persistent_files</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-id128</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd-login.xml b/man/sd-login.xml deleted file mode 100644 index 328f71164d..0000000000 --- a/man/sd-login.xml +++ /dev/null @@ -1,135 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd-login" conditional='HAVE_PAM' - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd-login</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd-login</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd-login</refname> - <refpurpose>APIs for - tracking logins</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-login.h></funcsynopsisinfo> - </funcsynopsis> - - <cmdsynopsis> - <command>pkg-config --cflags --libs libsystemd</command> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>sd-login.h</filename> provides APIs to introspect - and monitor seat, login session and user status information on the - local system. </para> - - <para>See <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/multiseat">Multi-Seat - on Linux</ulink> for an introduction into multi-seat support on - Linux, the background for this set of APIs.</para> - - <para>Note that these APIs only allow purely passive access and - monitoring of seats, sessions and users. To actively make changes - to the seat configuration, terminate login sessions, or switch - session on a seat you need to utilize the D-Bus API of - systemd-logind, instead.</para> - - <para>These functions synchronously access data in - <filename>/proc</filename>, <filename>/sys/fs/cgroup</filename> - and <filename>/run</filename>. All of these are virtual file - systems, hence the runtime cost of the accesses is relatively - cheap.</para> - - <para>It is possible (and often a very good choice) to mix calls - to the synchronous interface of <filename>sd-login.h</filename> - with the asynchronous D-Bus interface of systemd-logind. However, - if this is done you need to think a bit about possible races since - the stream of events from D-Bus and from - <filename>sd-login.h</filename> interfaces such as the login - monitor are asynchronous and not ordered against each - other.</para> - - <para>If the functions return string arrays, these are generally - <constant>NULL</constant> terminated and need to be freed by the - caller with the libc - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use, including the strings referenced therein. - Similarly, individual strings returned need to be freed, as - well.</para> - - <para>As a special exception, instead of an empty string array - <constant>NULL</constant> may be returned, which should be treated - equivalent to an empty string array.</para> - - <para>See - <citerefentry><refentrytitle>sd_pid_get_session</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_uid_get_state</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_session_is_active</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_seat_get_active</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_get_seats</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_login_monitor_new</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for more information about the functions - implemented.</para> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_pid_get_session</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_uid_get_state</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_session_is_active</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_seat_get_active</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_get_seats</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_login_monitor_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_booted.xml b/man/sd_booted.xml deleted file mode 100644 index 4dd674b8ea..0000000000 --- a/man/sd_booted.xml +++ /dev/null @@ -1,95 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_booted" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_booted</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_booted</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_booted</refname> - <refpurpose>Test whether the system is running the systemd init system</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-daemon.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_booted</function></funcdef> - <paramdef>void</paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - <para><function>sd_booted()</function> checks whether the system - was booted up using the systemd init system.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On failure, this call returns a negative errno-style error - code. If the system was booted up with systemd as init system, - this call returns a positive return value, zero otherwise.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <xi:include href="libsystemd-pkgconfig.xml" xpointer="pkgconfig-text"/> - - <para>Internally, this function checks whether the directory - <filename>/run/systemd/system/</filename> exists. A simple check - like this can also be implemented trivially in shell or any other - language.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_bus_creds_get_pid.xml b/man/sd_bus_creds_get_pid.xml deleted file mode 100644 index 4c05835568..0000000000 --- a/man/sd_bus_creds_get_pid.xml +++ /dev/null @@ -1,566 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_bus_creds_get_pid"> - - <refentryinfo> - <title>sd_bus_creds_get_pid</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>A monkey with a typewriter</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_bus_creds_get_pid</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_bus_creds_get_pid</refname> - <refname>sd_bus_creds_get_ppid</refname> - <refname>sd_bus_creds_get_tid</refname> - <refname>sd_bus_creds_get_uid</refname> - <refname>sd_bus_creds_get_euid</refname> - <refname>sd_bus_creds_get_suid</refname> - <refname>sd_bus_creds_get_fsuid</refname> - <refname>sd_bus_creds_get_gid</refname> - <refname>sd_bus_creds_get_egid</refname> - <refname>sd_bus_creds_get_sgid</refname> - <refname>sd_bus_creds_get_fsgid</refname> - <refname>sd_bus_creds_get_supplementary_gids</refname> - <refname>sd_bus_creds_get_comm</refname> - <refname>sd_bus_creds_get_tid_comm</refname> - <refname>sd_bus_creds_get_exe</refname> - <refname>sd_bus_creds_get_cmdline</refname> - <refname>sd_bus_creds_get_cgroup</refname> - <refname>sd_bus_creds_get_unit</refname> - <refname>sd_bus_creds_get_slice</refname> - <refname>sd_bus_creds_get_user_unit</refname> - <refname>sd_bus_creds_get_user_slice</refname> - <refname>sd_bus_creds_get_session</refname> - <refname>sd_bus_creds_get_owner_uid</refname> - <refname>sd_bus_creds_has_effective_cap</refname> - <refname>sd_bus_creds_has_permitted_cap</refname> - <refname>sd_bus_creds_has_inheritable_cap</refname> - <refname>sd_bus_creds_has_bounding_cap</refname> - <refname>sd_bus_creds_get_selinux_context</refname> - <refname>sd_bus_creds_get_audit_session_id</refname> - <refname>sd_bus_creds_get_audit_login_uid</refname> - <refname>sd_bus_creds_get_tty</refname> - <refname>sd_bus_creds_get_unique_name</refname> - <refname>sd_bus_creds_get_well_known_names</refname> - <refname>sd_bus_creds_get_description</refname> - - <refpurpose>Retrieve fields from a credentials object</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_pid</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>pid_t *<parameter>pid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_ppid</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>pid_t *<parameter>ppid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_tid</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>pid_t *<parameter>tid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_uid</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>uid_t *<parameter>uid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_euid</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>uid_t *<parameter>uid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_suid</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>uid_t *<parameter>uid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_fsuid</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>uid_t *<parameter>uid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_gid</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>gid_t *<parameter>gid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_egid</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>gid_t *<parameter>gid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_sgid</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>gid_t *<parameter>gid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_fsgid</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>gid_t *<parameter>gid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_supplementary_gids</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>const gid_t **<parameter>gids</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_comm</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>const char **<parameter>comm</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_tid_comm</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>const char **<parameter>comm</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_exe</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>const char **<parameter>exe</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_cmdline</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>char ***<parameter>cmdline</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_cgroup</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>const char **<parameter>cgroup</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_unit</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>const char **<parameter>unit</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_slice</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>const char **<parameter>slice</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_user_unit</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>const char **<parameter>unit</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_user_slice</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>const char **<parameter>slice</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_session</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>const char **<parameter>slice</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_owner_uid</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>uid_t *<parameter>uid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_has_effective_cap</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>int <parameter>capability</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_has_permitted_cap</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>int <parameter>capability</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_has_inheritable_cap</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>int <parameter>capability</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_has_bounding_cap</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>int <parameter>capability</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_selinux_context</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>const char **<parameter>context</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_audit_session_id</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>uint32_t *<parameter>sessionid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_audit_login_uid</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>uid_t *<parameter>loginuid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_tty</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>const char **<parameter>tty</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_unique_name</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>const char **<parameter>name</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_well_known_names</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>char ***<parameter>name</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_get_description</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - <paramdef>const char **<parameter>name</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>These functions return credential information from an - <parameter>sd_bus_creds</parameter> object. Credential objects may - be created with - <citerefentry><refentrytitle>sd_bus_creds_new_from_pid</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - in which case they describe the credentials of the process - identified by the specified PID, with - <citerefentry><refentrytitle>sd_bus_get_name_creds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - in which case they describe the credentials of a bus peer - identified by the specified bus name, with - <citerefentry><refentrytitle>sd_bus_get_owner_creds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - in which case they describe the credentials of the creator of a - bus, or with - <citerefentry><refentrytitle>sd_bus_message_get_creds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - in which case they describe the credentials of the sender of the - message.</para> - - <para>Not all credential fields are part of every - <literal>sd_bus_creds</literal> object. Use - <citerefentry><refentrytitle>sd_bus_creds_get_mask</refentrytitle><manvolnum>3</manvolnum></citerefentry> - to determine the mask of fields available.</para> - - <para><function>sd_bus_creds_get_pid()</function> will retrieve - the PID (process identifier). Similarly, - <function>sd_bus_creds_get_ppid()</function> will retrieve the - parent PID. Note that PID 1 has no parent process, in which case - -ENXIO is returned.</para> - - <para><function>sd_bus_creds_get_tid()</function> will retrieve the - TID (thread identifier).</para> - - <para><function>sd_bus_creds_get_uid()</function> will retrieve - the numeric UID (user identifier). Similarly, - <function>sd_bus_creds_get_euid()</function> returns the effective - UID, <function>sd_bus_creds_get_suid()</function> the saved UID - and <function>sd_bus_creds_get_fsuid()</function> the file system - UID.</para> - - <para><function>sd_bus_creds_get_gid()</function> will retrieve the - numeric GID (group identifier). Similarly, - <function>sd_bus_creds_get_egid()</function> returns the effective - GID, <function>sd_bus_creds_get_sgid()</function> the saved GID - and <function>sd_bus_creds_get_fsgid()</function> the file system - GID.</para> - - <para><function>sd_bus_creds_get_supplementary_gids()</function> - will retrieve the supplementary GIDs list.</para> - - <para><function>sd_bus_creds_get_comm()</function> will retrieve the - comm field (truncated name of the executable, as stored in - <filename>/proc/<replaceable>pid</replaceable>/comm</filename>). - </para> - - <para><function>sd_bus_creds_get_tid_comm()</function> will retrieve - the comm field of the thread (as stored in - <filename>/proc/<replaceable>pid</replaceable>/task/<replaceable>tid</replaceable>/comm</filename>). - </para> - - <para><function>sd_bus_creds_get_exe()</function> will retrieve - the path to the program executable (as stored in the - <filename>/proc/<replaceable>pid</replaceable>/exe</filename> - link, but with the <literal> (deleted)</literal> suffix removed). Note - that kernel threads do not have an executable path, in which case - -ENXIO is returned.</para> - - <para><function>sd_bus_creds_get_cmdline()</function> will - retrieve an array of command line arguments (as stored in - <filename>/proc/<replaceable>pid</replaceable>/cmdline</filename>). Note - that kernel threads do not have a command line, in which case - -ENXIO is returned.</para> - - <para><function>sd_bus_creds_get_cgroup()</function> will retrieve - the cgroup path. See <ulink - url="https://www.kernel.org/doc/Documentation/cgroups/cgroups.txt">cgroups.txt</ulink>. - </para> - - <para><function>sd_bus_creds_get_unit()</function> will retrieve - the systemd unit name (in the system instance of systemd) that the - process is a part of. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. For - processes that are not part of a unit, returns -ENXIO. - </para> - - <para><function>sd_bus_creds_get_user_unit()</function> will - retrieve the systemd unit name (in the user instance of systemd) - that the process is a part of. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. For - processes that are not part of a user unit, returns -ENXIO. - </para> - - <para><function>sd_bus_creds_get_slice()</function> will retrieve - the systemd slice (a unit in the system instance of systemd) that - the process is a part of. See - <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>. Similarly, - <function>sd_bus_creds_get_user_slice()</function> retrieves the - systemd slice of the process, in the user instance of systemd. - </para> - - <para><function>sd_bus_creds_get_session()</function> will - retrieve the identifier of the login session that the process is - a part of. See - <citerefentry><refentrytitle>systemd-logind.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>. For - processes that are not part of a session, returns -ENXIO. - </para> - - <para><function>sd_bus_creds_get_owner_uid()</function> will - retrieve the numeric UID (user identifier) of the user who owns - the login session that the process is a part of. See - <citerefentry><refentrytitle>systemd-logind.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - For processes that are not part of a session, returns -ENXIO. - </para> - - <para><function>sd_bus_creds_has_effective_cap()</function> will check whether the capability specified by - <parameter>capability</parameter> was set in the effective capabilities mask. A positive return value means that it - was set, zero means that it was not set, and a negative return value indicates an error. See <citerefentry - project='man-pages'><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry> and the - <varname>AmbientCapabilities=</varname> and <varname>CapabilityBoundingSet=</varname> settings in - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para> - - <para><function>sd_bus_creds_has_permitted_cap()</function> is - similar to <function>sd_bus_creds_has_effective_cap()</function>, - but will check the permitted capabilities mask.</para> - - <para><function>sd_bus_creds_has_inheritable_cap()</function> is - similar to <function>sd_bus_creds_has_effective_cap()</function>, - but will check the inheritable capabilities mask.</para> - - <para><function>sd_bus_creds_has_bounding_cap()</function> is - similar to <function>sd_bus_creds_has_effective_cap()</function>, - but will check the bounding capabilities mask.</para> - - <para><function>sd_bus_creds_get_selinux_context()</function> will - retrieve the SELinux security context (label) of the process.</para> - - <para><function>sd_bus_creds_get_audit_session_id()</function> - will retrieve the audit session identifier of the process. Returns - -ENXIO for processes that are not part of an audit session.</para> - - <para><function>sd_bus_creds_get_audit_login_uid()</function> will - retrieve the audit user login identifier (the identifier of the - user who is "responsible" for the session). Returns -ENXIO for - processes that are not part of an audit session.</para> - - <para><function>sd_bus_creds_get_tty()</function> will retrieve - the controlling TTY, without the prefixing "/dev/". Returns -ENXIO - for processes that have no controlling TTY.</para> - - <para><function>sd_bus_creds_get_unique_name()</function> will - retrieve the D-Bus unique name. See <ulink - url="http://dbus.freedesktop.org/doc/dbus-specification.html#message-protocol-names-bus">The - D-Bus specification</ulink>.</para> - - <para><function>sd_bus_creds_get_well_known_names()</function> will - retrieve the set of D-Bus well-known names. See <ulink - url="http://dbus.freedesktop.org/doc/dbus-specification.html#message-protocol-names-bus">The - D-Bus specification</ulink>.</para> - - <para><function>sd_bus_creds_get_description()</function> will - retrieve a descriptive name of the bus connection of the - peer. This name is useful to discern multiple bus connections by - the same peer, and may be altered by the peer with the - <citerefentry><refentrytitle>sd_bus_set_description</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call.</para> - - <para>All functions that take a <parameter>const - char**</parameter> parameter will store the answer there as an - address of a NUL-terminated string. It will be valid as long as - <parameter>c</parameter> remains valid, and should not be freed or - modified by the caller.</para> - - <para>All functions that take a <parameter>char***</parameter> - parameter will store the answer there as an address of an array - of strings. Each individual string is NUL-terminated, and the - array is NULL-terminated as a whole. It will be valid as long as - <parameter>c</parameter> remains valid, and should not be freed or - modified by the caller.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, these calls return 0 or a positive integer. On - failure, these calls return a negative errno-style error code. - </para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-ENODATA</constant></term> - - <listitem><para>The given field is not available in the - credentials object <parameter>c</parameter>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENXIO</constant></term> - - <listitem><para>The given field is not specified for the described - process or peer. This will be returned by - <function>sd_bus_get_unit()</function>, - <function>sd_bus_get_slice()</function>, - <function>sd_bus_get_user_unit()</function>, - <function>sd_bus_get_user_slice()</function>, - <function>sd_bus_get_session()</function>, and - <function>sd_bus_get_owner_uid()</function> if the process is - not part of a systemd system unit, systemd user unit, systemd - slice, or logind session. It will also be returned by - <function>sd_bus_creds_get_exe()</function> and - <function>sd_bus_creds_get_cmdline()</function> for kernel - threads (since these are not started from an executable binary, - nor have a command line), and by - <function>sd_bus_creds_get_audit_session_id()</function> and - <function>sd_bus_creds_get_audit_login_uid()</function> when - the process is not part of an audit session, and - <function>sd_bus_creds_get_tty()</function> if the process has - no controlling TTY. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>Specified pointer parameter is <constant>NULL</constant>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Memory allocation failed.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para><function>sd_bus_creds_get_pid()</function> and the other - functions described here are available as a shared library, which - can be compiled and linked to with the - <constant>libsystemd</constant> <citerefentry - project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_creds_new_from_pid</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>fork</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>execve</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>credentials</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>proc</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_bus_creds_new_from_pid.xml b/man/sd_bus_creds_new_from_pid.xml deleted file mode 100644 index 082f7b67db..0000000000 --- a/man/sd_bus_creds_new_from_pid.xml +++ /dev/null @@ -1,353 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_bus_creds_new_from_pid"> - - <refentryinfo> - <title>sd_bus_creds_new_from_pid</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>A monkey with a typewriter</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_bus_creds_new_from_pid</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_bus_creds_new_from_pid</refname> - <refname>sd_bus_creds_get_mask</refname> - <refname>sd_bus_creds_get_augmented_mask</refname> - <refname>sd_bus_creds_ref</refname> - <refname>sd_bus_creds_unref</refname> - <refname>sd_bus_creds_unrefp</refname> - - <refpurpose>Retrieve credentials object for the specified PID</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_bus_creds_new_from_pid</function></funcdef> - <paramdef>pid_t <parameter>pid</parameter></paramdef> - <paramdef>uint64_t <parameter>creds_mask</parameter></paramdef> - <paramdef>sd_bus_creds **<parameter>ret</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>uint64_t <function>sd_bus_creds_get_mask</function></funcdef> - <paramdef>const sd_bus_creds *<parameter>c</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>uint64_t <function>sd_bus_creds_get_augmented_mask</function></funcdef> - <paramdef>const sd_bus_creds *<parameter>c</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>sd_bus_creds *<function>sd_bus_creds_ref</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>sd_bus_creds *<function>sd_bus_creds_unref</function></funcdef> - <paramdef>sd_bus_creds *<parameter>c</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>void <function>sd_bus_creds_unrefp</function></funcdef> - <paramdef>sd_bus_creds **<parameter>c</parameter></paramdef> - </funcprototype> - </funcsynopsis> - - <para> - <constant>SD_BUS_CREDS_PID</constant>, - <constant>SD_BUS_CREDS_PPID</constant>, - <constant>SD_BUS_CREDS_TID</constant>, - <constant>SD_BUS_CREDS_UID</constant>, - <constant>SD_BUS_CREDS_EUID</constant>, - <constant>SD_BUS_CREDS_SUID</constant>, - <constant>SD_BUS_CREDS_FSUID</constant>, - <constant>SD_BUS_CREDS_GID</constant>, - <constant>SD_BUS_CREDS_EGID</constant>, - <constant>SD_BUS_CREDS_SGID</constant>, - <constant>SD_BUS_CREDS_FSGID</constant>, - <constant>SD_BUS_CREDS_SUPPLEMENTARY_GIDS</constant>, - <constant>SD_BUS_CREDS_COMM</constant>, - <constant>SD_BUS_CREDS_TID_COMM</constant>, - <constant>SD_BUS_CREDS_EXE</constant>, - <constant>SD_BUS_CREDS_CMDLINE</constant>, - <constant>SD_BUS_CREDS_CGROUP</constant>, - <constant>SD_BUS_CREDS_UNIT</constant>, - <constant>SD_BUS_CREDS_SLICE</constant>, - <constant>SD_BUS_CREDS_USER_UNIT</constant>, - <constant>SD_BUS_CREDS_USER_SLICE</constant>, - <constant>SD_BUS_CREDS_SESSION</constant>, - <constant>SD_BUS_CREDS_OWNER_UID</constant>, - <constant>SD_BUS_CREDS_EFFECTIVE_CAPS</constant>, - <constant>SD_BUS_CREDS_PERMITTED_CAPS</constant>, - <constant>SD_BUS_CREDS_INHERITABLE_CAPS</constant>, - <constant>SD_BUS_CREDS_BOUNDING_CAPS</constant>, - <constant>SD_BUS_CREDS_SELINUX_CONTEXT</constant>, - <constant>SD_BUS_CREDS_AUDIT_SESSION_ID</constant>, - <constant>SD_BUS_CREDS_AUDIT_LOGIN_UID</constant>, - <constant>SD_BUS_CREDS_TTY</constant>, - <constant>SD_BUS_CREDS_UNIQUE_NAME</constant>, - <constant>SD_BUS_CREDS_WELL_KNOWN_NAMES</constant>, - <constant>SD_BUS_CREDS_DESCRIPTION</constant>, - <constant>SD_BUS_CREDS_AUGMENT</constant>, - <constant>_SD_BUS_CREDS_ALL</constant> - </para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_bus_creds_new_from_pid()</function> creates a - new credentials object and fills it with information about the - process <parameter>pid</parameter>. The pointer to this object - will be stored in the <parameter>ret</parameter> pointer. Note that - credential objects may also be created and retrieved via - <citerefentry><refentrytitle>sd_bus_get_name_creds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_get_owner_creds</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>sd_bus_message_get_creds</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para>The information that will be stored is determined by - <parameter>creds_mask</parameter>. It may contain a subset of ORed - constants <constant>SD_BUS_CREDS_PID</constant>, - <constant>SD_BUS_CREDS_PPID</constant>, - <constant>SD_BUS_CREDS_TID</constant>, - <constant>SD_BUS_CREDS_UID</constant>, - <constant>SD_BUS_CREDS_EUID</constant>, - <constant>SD_BUS_CREDS_SUID</constant>, - <constant>SD_BUS_CREDS_FSUID</constant>, - <constant>SD_BUS_CREDS_GID</constant>, - <constant>SD_BUS_CREDS_EGID</constant>, - <constant>SD_BUS_CREDS_SGID</constant>, - <constant>SD_BUS_CREDS_FSGID</constant>, - <constant>SD_BUS_CREDS_SUPPLEMENTARY_GIDS</constant>, - <constant>SD_BUS_CREDS_COMM</constant>, - <constant>SD_BUS_CREDS_TID_COMM</constant>, - <constant>SD_BUS_CREDS_EXE</constant>, - <constant>SD_BUS_CREDS_CMDLINE</constant>, - <constant>SD_BUS_CREDS_CGROUP</constant>, - <constant>SD_BUS_CREDS_UNIT</constant>, - <constant>SD_BUS_CREDS_SLICE</constant>, - <constant>SD_BUS_CREDS_USER_UNIT</constant>, - <constant>SD_BUS_CREDS_USER_SLICE</constant>, - <constant>SD_BUS_CREDS_SESSION</constant>, - <constant>SD_BUS_CREDS_OWNER_UID</constant>, - <constant>SD_BUS_CREDS_EFFECTIVE_CAPS</constant>, - <constant>SD_BUS_CREDS_PERMITTED_CAPS</constant>, - <constant>SD_BUS_CREDS_INHERITABLE_CAPS</constant>, - <constant>SD_BUS_CREDS_BOUNDING_CAPS</constant>, - <constant>SD_BUS_CREDS_SELINUX_CONTEXT</constant>, - <constant>SD_BUS_CREDS_AUDIT_SESSION_ID</constant>, - <constant>SD_BUS_CREDS_AUDIT_LOGIN_UID</constant>, - <constant>SD_BUS_CREDS_TTY</constant>, - <constant>SD_BUS_CREDS_UNIQUE_NAME</constant>, - <constant>SD_BUS_CREDS_WELL_KNOWN_NAMES</constant>, and - <constant>SD_BUS_CREDS_DESCRIPTION</constant>. Use the special - value <constant>_SD_BUS_CREDS_ALL</constant> to request all - supported fields. The <constant>SD_BUS_CREDS_AUGMENT</constant> - constant may not be ORed into the mask for invocations of - <function>sd_bus_creds_new_from_pid()</function>.</para> - - <para>Fields can be retrieved from the credentials object using - <citerefentry><refentrytitle>sd_bus_creds_get_pid</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and other functions which correspond directly to the constants - listed above.</para> - - <para>A mask of fields which were actually successfully retrieved - can be retrieved with - <function>sd_bus_creds_get_mask()</function>. If the credentials - object was created with - <function>sd_bus_creds_new_from_pid()</function>, this will be a - subset of fields requested in <parameter>creds_mask</parameter>. - </para> - - <para>Similar to <function>sd_bus_creds_get_mask()</function>, the - function <function>sd_bus_creds_get_augmented_mask()</function> - returns a bitmask of field constants. The mask indicates which - credential fields have been retrieved in a non-atomic fashion. For - credential objects created via - <function>sd_bus_creds_new_from_pid()</function>, this mask will be - identical to the mask returned by - <function>sd_bus_creds_get_mask()</function>. However, for - credential objects retrieved via - <function>sd_bus_get_name_creds()</function>, this mask will be set - for the credential fields that could not be determined atomically - at peer connection time, and which were later added by reading - augmenting credential data from - <filename>/proc</filename>. Similarly, for credential objects - retrieved via <function>sd_bus_get_owner_creds()</function>, the - mask is set for the fields that could not be determined atomically - at bus creation time, but have been augmented. Similarly, for - credential objects retrieved via - <function>sd_bus_message_get_creds()</function>, the mask is set - for the fields that could not be determined atomically at message - sending time, but have been augmented. The mask returned by - <function>sd_bus_creds_get_augmented_mask()</function> is always a - subset of (or identical to) the mask returned by - <function>sd_bus_creds_get_mask()</function> for the same - object. The latter call hence returns all credential fields - available in the credential object, the former then marks the - subset of those that have been augmented. Note that augmented - fields are unsuitable for authorization decisions, as they may be - retrieved at different times, thus being subject to races. Hence, - augmented fields should be used exclusively for informational - purposes. - </para> - - <para><function>sd_bus_creds_ref()</function> creates a new - reference to the credentials object <parameter>c</parameter>. This - object will not be destroyed until - <function>sd_bus_creds_unref()</function> has been called as many - times plus once more. Once the reference count has dropped to zero, - <parameter>c</parameter> cannot be used anymore, so further - calls to <function>sd_bus_creds_ref(c)</function> or - <function>sd_bus_creds_unref(c)</function> are illegal.</para> - - <para><function>sd_bus_creds_unref()</function> destroys a reference - to <parameter>c</parameter>.</para> - - <para><function>sd_bus_creds_unrefp()</function> is similar to - <function>sd_bus_creds_unref()</function> but takes a pointer to a - pointer to an <type>sd_bus_creds</type> object. This call is useful in - conjunction with GCC's and LLVM's <ulink - url="https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html">Clean-up - Variable Attribute</ulink>. Note that this function is defined as - inline function.</para> - - <para><function>sd_bus_creds_ref()</function>, - <function>sd_bus_creds_unref()</function> and - <function>sd_bus_creds_unrefp()</function> execute no operation if - the passed in bus credentials object is - <constant>NULL</constant>.</para> - - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, <function>sd_bus_creds_new_from_pid()</function> - returns 0 or a positive integer. On failure, it returns a negative - errno-style error code.</para> - - <para><function>sd_bus_creds_get_mask()</function> returns the - mask of successfully acquired fields.</para> - - <para><function>sd_bus_creds_get_augmented_mask()</function> - returns the mask of fields that have been augmented from data in - <filename>/proc</filename>, and are thus not suitable for - authorization decisions.</para> - - <para><function>sd_bus_creds_ref()</function> always returns the - argument.</para> - - <para><function>sd_bus_creds_unref()</function> always returns - <constant>NULL</constant>.</para> - </refsect1> - - <refsect1> - <title>Reference ownership</title> - - <para>Function <function>sd_bus_creds_new_from_pid()</function> - creates a new object and the caller owns the sole reference. When - not needed anymore, this reference should be destroyed with - <citerefentry><refentrytitle>sd_bus_creds_unref</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - </para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - - <varlistentry> - <term><constant>-ESRCH</constant></term> - - <listitem><para>Specified <parameter>pid</parameter> could not - be found.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>Specified parameter is invalid - (<constant>NULL</constant> in case of output - parameters).</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Memory allocation failed.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EOPNOTSUPP</constant></term> - - <listitem><para>One of the requested fields is unknown to the local system.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para><function>sd_bus_creds_new_from_pid()</function> and the - other calls described here are available as a shared library, - which can be compiled and linked to with the - <constant>libsystemd</constant> <citerefentry - project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_creds_get_pid</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_get_name_creds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_get_owner_creds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_get_creds</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_bus_default.xml b/man/sd_bus_default.xml deleted file mode 100644 index 6d5a90de72..0000000000 --- a/man/sd_bus_default.xml +++ /dev/null @@ -1,312 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_bus_default"> - - <refentryinfo> - <title>sd_bus_default</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>A monkey with a typewriter</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_bus_default</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_bus_default</refname> - <refname>sd_bus_default_user</refname> - <refname>sd_bus_default_system</refname> - - <refname>sd_bus_open</refname> - <refname>sd_bus_open_user</refname> - <refname>sd_bus_open_system</refname> - <refname>sd_bus_open_system_remote</refname> - <refname>sd_bus_open_system_machine</refname> - - <refpurpose>Acquire a connection to a system or user bus</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_bus_default</function></funcdef> - <paramdef>sd_bus **<parameter>bus</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_default_user</function></funcdef> - <paramdef>sd_bus **<parameter>bus</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_default_system</function></funcdef> - <paramdef>sd_bus **<parameter>bus</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_open</function></funcdef> - <paramdef>sd_bus **<parameter>bus</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_open_user</function></funcdef> - <paramdef>sd_bus **<parameter>bus</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_open_system</function></funcdef> - <paramdef>sd_bus **<parameter>bus</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_open_system_remote</function></funcdef> - <paramdef>sd_bus **<parameter>bus</parameter></paramdef> - <paramdef>const char *<parameter>host</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_open_system_machine</function></funcdef> - <paramdef>sd_bus **<parameter>bus</parameter></paramdef> - <paramdef>const char *<parameter>machine</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_bus_default()</function> acquires a bus - connection object to the user bus when invoked in user context, or - to the system bus otherwise. The connection object is associated - with the calling thread. Each time the function is invoked from - the same thread, the same object is returned, but its reference - count is increased by one, as long as at least one reference is - kept. When the last reference to the connection is dropped (using - the - <citerefentry><refentrytitle>sd_bus_unref</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call), the connection is terminated. Note that the connection is - not automatically terminated when the associated thread ends. It - is important to drop the last reference to the bus connection - explicitly before the thread ends, as otherwise, the connection will - leak. Also, queued but unread or unwritten messages keep the - bus referenced, see below.</para> - - <para><function>sd_bus_default_user()</function> returns a user - bus connection object associated with the calling thread. - <function>sd_bus_default_system()</function> is similar, but - connects to the system bus. Note that - <function>sd_bus_default()</function> is identical to these two - calls, depending on the execution context.</para> - - <para><function>sd_bus_open()</function> creates a new, - independent bus connection to the user bus when invoked in user - context, or the system bus - otherwise. <function>sd_bus_open_user()</function> is similar, but - connects only to the user bus. - <function>sd_bus_open_system()</function> does the same, but - connects to the system bus. In contrast to - <function>sd_bus_default()</function>, - <function>sd_bus_default_user()</function>, and - <function>sd_bus_default_system()</function>, these calls return - new, independent connection objects that are not associated with - the invoking thread and are not shared between multiple - invocations. It is recommended to share connections per thread to - efficiently make use the available resources. Thus, it is - recommended to use <function>sd_bus_default()</function>, - <function>sd_bus_default_user()</function> and - <function>sd_bus_default_system()</function> to connect to the - user or system buses.</para> - - <para>If the <varname>$DBUS_SESSION_BUS_ADDRESS</varname> environment - variable is set - (cf. <citerefentry project='man-pages'><refentrytitle>environ</refentrytitle><manvolnum>7</manvolnum></citerefentry>), - it will be used as the address of the user bus. This variable can - contain multiple addresses separated by <literal>;</literal>. If - this variable is not set, a suitable default for the default user - D-Bus instance will be used.</para> - - <para>If the <varname>$DBUS_SYSTEM_BUS_ADDRESS</varname> - environment variable is set, it will be used as the address of the - system bus. This variable uses the same syntax as - <varname>$DBUS_SESSION_BUS_ADDRESS</varname>. If this variable is - not set, a suitable default for the default system D-Bus instance - will be used.</para> - - <para><function>sd_bus_open_system_remote()</function> connects to - the system bus on the specified <parameter>host</parameter> using - <citerefentry - project='die-net'><refentrytitle>ssh</refentrytitle><manvolnum>1</manvolnum></citerefentry>. <parameter>host</parameter> - consists of an optional user name followed by the - <literal>@</literal> symbol, and the hostname. - </para> - - <para><function>sd_bus_open_system_machine()</function> connects - to the system bus in the specified <parameter>machine</parameter>, - where <parameter>machine</parameter> is the name of a local - container. See - <citerefentry><refentrytitle>machinectl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - for more information about the "machine" concept. Note that - connections into local containers are only available to privileged - processes at this time.</para> - - <para>These calls allocate a bus connection object and initiate - the connection to a well-known bus of some form. An alternative to - using these high-level calls is to create an unconnected bus - object with - <citerefentry><refentrytitle>sd_bus_new</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and to connect it with - <citerefentry><refentrytitle>sd_bus_start</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - </para> - - </refsect1> - - <refsect1> - <title>Reference ownership</title> - <para>The functions <function>sd_bus_open()</function>, - <function>sd_bus_open_user()</function>, - <function>sd_bus_open_system()</function>, - <function>sd_bus_open_system_remote()</function>, and - <function>sd_bus_open_system_machine()</function> return a new - connection object and the caller owns the sole reference. When not - needed anymore, this reference should be destroyed with - <citerefentry><refentrytitle>sd_bus_unref</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - </para> - - <para>The functions <function>sd_bus_default()</function>, - <function>sd_bus_default_user()</function> and - <function>sd_bus_default_system()</function> do not necessarily - create a new object, but increase the connection reference of an - existing connection object by one. Use - <citerefentry><refentrytitle>sd_bus_unref</refentrytitle><manvolnum>3</manvolnum></citerefentry> - to drop the reference.</para> - - <para>Queued but unwritten/unread messages also keep a reference - to their bus connection object. For this reason, even if an - application dropped all references to a bus connection, it might - not get destroyed right away. Until all incoming queued - messages are read, and until all outgoing unwritten messages are - written, the bus object will stay - alive. <function>sd_bus_flush()</function> may be used to write - all outgoing queued messages so they drop their references. To - flush the unread incoming messages, use - <function>sd_bus_close()</function>, which will also close the bus - connection. When using the default bus logic, it is a good idea to - first invoke <function>sd_bus_flush()</function> followed by - <function>sd_bus_close()</function> when a thread or process - terminates, and thus its bus connection object should be - freed.</para> - - <para>The life cycle of the default bus connection should be the - responsibility of the code that creates/owns the thread the - default bus connection object is associated with. Library code - should neither call <function>sd_bus_flush()</function> nor - <function>sd_bus_close()</function> on default bus objects unless - it does so in its own private, self-allocated thread. Library code - should not use the default bus object in other threads unless it - is clear that the program using it will life cycle the bus - connection object and flush and close it before exiting from the - thread. In libraries where it is not clear that the calling - program will life cycle the bus connection object, it is hence - recommended to use <function>sd_bus_open_system()</function> - instead of <function>sd_bus_default_system()</function> and - related calls.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, these calls return 0 or a positive - integer. On failure, these calls return a negative - errno-style error code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>The specified parameters are invalid.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Memory allocation failed.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ESOCKTNOSUPPORT</constant></term> - - <listitem><para>The protocol version required to connect to the selected bus is not supported.</para></listitem> - </varlistentry> - </variablelist> - - <para>In addition, any further connection-related errors may be - by returned. See <citerefentry><refentrytitle>sd_bus_send</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para><function>sd_bus_open_user()</function> and the other - functions described here are available as a shared library, which - can be compiled and linked to with the - <constant>libsystemd</constant> <citerefentry - project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_ref</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_unref</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>ssh</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machinectl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_bus_error.xml b/man/sd_bus_error.xml deleted file mode 100644 index c2d7ee389b..0000000000 --- a/man/sd_bus_error.xml +++ /dev/null @@ -1,389 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_bus_error"> - - <refentryinfo> - <title>sd_bus_error</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>A monkey with a typewriter</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_bus_error</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_bus_error</refname> - <refname>SD_BUS_ERROR_MAKE_CONST</refname> - <refname>SD_BUS_ERROR_NULL</refname> - <refname>sd_bus_error_free</refname> - <refname>sd_bus_error_set</refname> - <refname>sd_bus_error_setf</refname> - <refname>sd_bus_error_set_const</refname> - <refname>sd_bus_error_set_errno</refname> - <refname>sd_bus_error_set_errnof</refname> - <refname>sd_bus_error_set_errnofv</refname> - <refname>sd_bus_error_get_errno</refname> - <refname>sd_bus_error_copy</refname> - <refname>sd_bus_error_is_set</refname> - <refname>sd_bus_error_has_name</refname> - - <refpurpose>sd-bus error handling</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - - <funcsynopsisinfo>typedef struct { - const char *name; - const char *message; - ... -} sd_bus_error;</funcsynopsisinfo> - - <para> - <constant>SD_BUS_ERROR_MAKE_CONST(<replaceable>name</replaceable>, <replaceable>message</replaceable>)</constant> - </para> - <para> - <constant>SD_BUS_ERROR_NULL</constant> - </para> - - <funcprototype> - <funcdef>void <function>sd_bus_error_free</function></funcdef> - <paramdef>sd_bus_error *<parameter>e</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_error_set</function></funcdef> - <paramdef>sd_bus_error *<parameter>e</parameter></paramdef> - <paramdef>const char *<parameter>name</parameter></paramdef> - <paramdef>const char *<parameter>message</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_error_setf</function></funcdef> - <paramdef>sd_bus_error *<parameter>e</parameter></paramdef> - <paramdef>const char *<parameter>name</parameter></paramdef> - <paramdef>const char *<parameter>format</parameter></paramdef> - <paramdef>...</paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_error_set_const</function></funcdef> - <paramdef>sd_bus_error *<parameter>e</parameter></paramdef> - <paramdef>const char *<parameter>name</parameter></paramdef> - <paramdef>const char *<parameter>message</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_error_set_errno</function></funcdef> - <paramdef>sd_bus_error *<parameter>e</parameter></paramdef> - <paramdef>int <parameter>error</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_error_set_errnof</function></funcdef> - <paramdef>sd_bus_error *<parameter>e</parameter></paramdef> - <paramdef>int <parameter>error</parameter></paramdef> - <paramdef>const char *<parameter>format</parameter></paramdef> - <paramdef>...</paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_error_set_errnofv</function></funcdef> - <paramdef>sd_bus_error *<parameter>e</parameter></paramdef> - <paramdef>int <parameter>error</parameter></paramdef> - <paramdef>const char *<parameter>format</parameter></paramdef> - <paramdef>va_list ap</paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_error_get_errno</function></funcdef> - <paramdef>const sd_bus_error *<parameter>e</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_error_copy</function></funcdef> - <paramdef>sd_bus_error *<parameter>dst</parameter></paramdef> - <paramdef>const sd_bus_error *<parameter>e</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_error_is_set</function></funcdef> - <paramdef>const sd_bus_error *<parameter>e</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_error_has_name</function></funcdef> - <paramdef>const sd_bus_error *<parameter>e</parameter></paramdef> - <paramdef>const char *<parameter>name</parameter></paramdef> - </funcprototype> - </funcsynopsis> - - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>The <structname>sd_bus_error</structname> structure carries - information about a D-Bus error condition. The functions described - below may be used to set and query fields in this structure. The - <structfield>name</structfield> field contains a short identifier - of an error. It should follow the rules for error names described - in the D-Bus specification, subsection <ulink - url="http://dbus.freedesktop.org/doc/dbus-specification.html#message-protocol-names">Valid - Names</ulink>. A number of common, standardized error names are - described in - <citerefentry><refentrytitle>sd-bus-errors</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - but additional domain-specific errors may be defined by - applications. The <structfield>message</structfield> field usually - contains a human-readable string describing the details, but might - be NULL. An unset <structname>sd_bus_error</structname> structure - should have both fields initialized to NULL. Set an error - structure to <constant>SD_BUS_ERROR_NULL</constant> in order to - reset both fields to NULL. When no longer necessary, resources - held by the <structname>sd_bus_error</structname>structure should - be destroyed with <function>sd_bus_error_free()</function>.</para> - - <para><function>sd_bus_error_set()</function> sets an error - structure to the specified name and message strings. The strings - will be copied into internal, newly allocated memory. It is - essential to free the error structure again when it is not - required anymore (see above). The function will return an - <varname>errno</varname>-like negative value (see <citerefentry - project='man-pages'><refentrytitle>errno</refentrytitle><manvolnum>3</manvolnum></citerefentry>) - determined from the specified error name. Various well-known - D-Bus errors are converted to well-known <varname>errno</varname> - counterparts, and the other ones to <constant>-EIO</constant>. See - <citerefentry><refentrytitle>sd-bus-errors</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for a list of well-known error names. Additional error mappings - may be defined with - <citerefentry><refentrytitle>sd_bus_error_add_map</refentrytitle><manvolnum>3</manvolnum></citerefentry>. If - <parameter>e</parameter> is NULL, no error structure is initialized, - but the error is still converted into an - <varname>errno</varname>-style error. If - <parameter>name</parameter> is <constant>NULL</constant>, it is - assumed that no error occurred, and 0 is returned. This means that - this function may be conveniently used in a - <function>return</function> statement. If - <parameter>message</parameter> is NULL, no message is set. This - call can fail if no memory may be allocated for the name and - message strings, in which case an - <constant>SD_BUS_ERROR_NO_MEMORY</constant> error might be set - instead and -ENOMEM be returned. Do not use this call on error - structures that are already initialized. If you intend to reuse an - error structure, free the old data stored in it with - <function>sd_bus_error_free()</function> first.</para> - - <para><function>sd_bus_error_setf()</function> is similar to - <function>sd_bus_error_set()</function>, but takes a <citerefentry - project='man-pages'><refentrytitle>printf</refentrytitle><manvolnum>3</manvolnum></citerefentry> - format string and corresponding arguments to generate the - <structfield>message</structfield> field.</para> - - <para><function>sd_bus_error_set_const()</function> is similar to - <function>sd_bus_error_set()</function>, but the string parameters - are not copied internally, and must hence remain constant and - valid for the lifetime of <parameter>e</parameter>. Use this call - to avoid memory allocations when setting error structures. Since - this call does not allocate memory, it will not fail with an - out-of-memory condition as - <function>sd_bus_error_set()</function> can, as described - above. Alternatively, the - <constant>SD_BUS_ERROR_MAKE_CONST()</constant> macro may be used - to generate a literal, constant bus error structure - on-the-fly.</para> - - <para><function>sd_bus_error_set_errno()</function> will set - <structfield>name</structfield> from an - <varname>errno</varname>-like value that is converted to a D-Bus - error. <citerefentry - project='die-net'><refentrytitle>strerror_r</refentrytitle><manvolnum>3</manvolnum></citerefentry> - will be used to set <structfield>message</structfield>. Well-known - D-Bus error names will be used for <structfield>name</structfield> - if applicable, otherwise a name in the - <literal>System.Error.</literal> namespace will be generated. The - sign of the specified error number is ignored. The absolute value - is used implicitly. The call always returns a negative value, for - convenient usage in <function>return</function> statements. This - call might fail due to lack of memory, in which case an - <constant>SD_BUS_ERROR_NO_MEMORY</constant> error is set instead, - and -ENOMEM is returned.</para> - - <para><function>sd_bus_error_set_errnof()</function> is similar to - <function>sd_bus_error_set_errno()</function>, but in addition to - <parameter>error</parameter>, takes a <citerefentry - project='man-pages'><refentrytitle>printf</refentrytitle><manvolnum>3</manvolnum></citerefentry> - format string and corresponding arguments. The - <structfield>message</structfield> field will be generated from - <parameter>format</parameter> and the arguments.</para> - - <para><function>sd_bus_error_set_errnofv()</function> is similar to - <function>sd_bus_error_set_errnof()</function>, but takes the - format string parameters as <citerefentry - project='man-pages'><refentrytitle>va_arg</refentrytitle><manvolnum>3</manvolnum></citerefentry> - parameter list.</para> - - <para><function>sd_bus_error_get_errno()</function> converts the - <structfield>name</structfield> field of an error structure to an - <varname>errno</varname>-like (positive) value using the same - rules as <function>sd_bus_error_set()</function>. If - <parameter>e</parameter> is <constant>NULL</constant>, 0 will be - returned.</para> - - <para><function>sd_bus_error_copy()</function> will initialize - <parameter>dst</parameter> using the values in - <parameter>e</parameter>. If the strings in - <parameter>e</parameter> were set using - <function>sd_bus_set_error_const()</function>, they will be shared. - Otherwise, they will be copied. Returns a converted - <varname>errno</varname>-like, negative error code.</para> - - <para><function>sd_bus_error_is_set()</function> will return a - non-zero value if <parameter>e</parameter> is - non-<constant>NULL</constant> and an error has been set, - <constant>false</constant> otherwise.</para> - - <para><function>sd_bus_error_has_name()</function> will return a - non-zero value if <parameter>e</parameter> is - non-<constant>NULL</constant> and an error with the same - <parameter>name</parameter> has been set, - <constant>false</constant> otherwise.</para> - - <para><function>sd_bus_error_free()</function> will destroy - resources held by <parameter>e</parameter>. The parameter itself - will not be deallocated, and must be <citerefentry - project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry>d - by the caller if necessary. The function may also be called safely - on unset errors (error structures with both fields set to NULL), - in which case it performs no operation. This call will reset the - error structure after freeing the data, so that all fields are set - to NULL. The structure may be reused afterwards.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>The functions <function>sd_bus_error_set()</function>, - <function>sd_bus_error_setf()</function>, and - <function>sd_bus_error_set_const()</function>, when successful, - return the negative errno value corresponding to the - <parameter>name</parameter> parameter. The functions - <function>sd_bus_error_set_errno()</function>, - <function>sd_bus_error_set_errnof()</function> and - <function>sd_bus_error_set_errnofv()</function>, when successful, - return the negative value of the <parameter>error</parameter> - parameter. If an error occurs, one of the negative error values - listed below will be returned.</para> - - <para><function>sd_bus_error_get_errno()</function> returns - <constant>false</constant> when <parameter>e</parameter> is - <constant>NULL</constant>, and a positive errno value mapped from - <parameter>e->name</parameter> otherwise.</para> - - <para><function>sd_bus_error_copy()</function> returns 0 or a - positive integer on success, and a negative error value converted - from the error name otherwise.</para> - - <para><function>sd_bus_error_is_set()</function> returns a - non-zero value when <parameter>e</parameter> and the - <structfield>name</structfield> field are - non-<constant>NULL</constant>, zero otherwise.</para> - - <para><function>sd_bus_error_has_name()</function> returns a - non-zero value when <parameter>e</parameter> is - non-<constant>NULL</constant> and the - <structfield>name</structfield> field is equal to - <parameter>name</parameter>, zero otherwise.</para> - </refsect1> - - <refsect1> - <title>Reference ownership</title> - <para><structname>sd_bus_error</structname> is not reference - counted. Users should destroy resources held by it by calling - <function>sd_bus_error_free()</function>. Usually, error structures - are allocated on the stack or passed in as function parameters, - but they may also be allocated dynamically, in which case it is - the duty of the caller to <citerefentry - project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - the memory held by the structure itself after freeing its contents - with <function>sd_bus_error_free()</function>.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>Error was already set in - <structname>sd_bus_error</structname> structure when one the - error-setting functions was called.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Memory allocation failed.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para><function>sd_bus_set_error()</function> and other functions - described here are available as a shared library, which can be - compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus-errors</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_error_add_map</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>errno</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>strerror_r</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_bus_error_add_map.xml b/man/sd_bus_error_add_map.xml deleted file mode 100644 index 7dc1ef6c90..0000000000 --- a/man/sd_bus_error_add_map.xml +++ /dev/null @@ -1,173 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_bus_error_add_map"> - - <refentryinfo> - <title>sd_bus_error_add_map</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_bus_error_add_map</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_bus_error_add_map</refname> - <refname>sd_bus_error_map</refname> - <refname>SD_BUS_ERROR_MAP</refname> - <refname>SD_BUS_ERROR_END</refname> - - <refpurpose>Additional sd-dbus error mappings</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - - <funcsynopsisinfo>typedef struct { - const char *name; - int code; - ... -} sd_bus_error_map;</funcsynopsisinfo> - - </funcsynopsis> - - <para> - <constant>SD_BUS_ERROR_MAP(<replaceable>name</replaceable>, <replaceable>code</replaceable>)</constant> - </para> - <para> - <constant>SD_BUS_ERROR_MAP_END</constant> - </para> - - <funcprototype> - <funcdef>int <function>sd_bus_error_add_map</function></funcdef> - <paramdef>const sd_bus_map *<parameter>map</parameter></paramdef> - </funcprototype> - - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>The <function>sd_bus_error_add_map()</function> call may be - used to register additional mappings for converting D-Bus errors - to GNU/Linux <varname>errno</varname>-style errors. The mappings - defined with this call are consulted by calls such as - <citerefentry><refentrytitle>sd_bus_error_set</refentrytitle><manvolnum>3</manvolnum></citerefentry> - or - <citerefentry><refentrytitle>sd_bus_error_get_errno</refentrytitle><manvolnum>3</manvolnum></citerefentry>. By - default, a number of generic, standardized mappings are known, as - documented in - <citerefentry><refentrytitle>sd-bus-errors</refentrytitle><manvolnum>3</manvolnum></citerefentry>. Use - this call to add further, application-specific mappings.</para> - - <para>The function takes a pointer to an array of - <structname>sd_bus_error_map</structname> structures. A reference - to the specified array is added to the lookup tables for error - mappings. Note that the structure is not copied, and that it is hence - essential that the array stays available and constant during the - entire remaining runtime of the process.</para> - - <para>The mapping array should be put together with a series of - <constant>SD_BUS_ERROR_MAP()</constant> macro invocations that - take a literal name string and a (positive) - <varname>errno</varname>-style error number. The last entry of the - array should be an invocation of the - <constant>SD_BUS_ERROR_MAP_END</constant> macro. The array should not be - put together without use of these two macros.</para> - - <para>Note that the call is idempotent: it is safe to invoke it - multiple times with the parameter, which will only add the passed - mapping array once.</para> - - <para>Note that the memory allocated by this call is not intended - to be freed during the lifetime of the process. It should not be - freed explicitly.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para><function>sd_bus_error_add_map()</function> returns a - positive value when the new array was added to the lookup - tables. It returns zero when the same array was already added - before. On error, a negative <varname>errno</varname>-style error - code is returned. See below for known error codes.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>The specified mapping array is invalid.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Memory allocation failed.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The various error definitions described here are available - as a shared library, which can be compiled and linked to with the - <constant>libsystemd</constant> <citerefentry - project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_error</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus-errors</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>errno</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>strerror_r</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_bus_message_append.xml b/man/sd_bus_message_append.xml deleted file mode 100644 index 77fce02eae..0000000000 --- a/man/sd_bus_message_append.xml +++ /dev/null @@ -1,264 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_bus_message_append" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_bus_message_append</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>A monkey with a typewriter</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_bus_message_append</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_bus_message_append</refname> - - <refpurpose>Attach fields to a D-Bus message based on a type - string</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int sd_bus_message_append</funcdef> - <paramdef>sd_bus_message *<parameter>m</parameter></paramdef> - <paramdef>const char *<parameter>types</parameter></paramdef> - <paramdef>...</paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>The <function>sd_bus_message_append()</function> function - appends a sequence of fields to the D-Bus message object - <parameter>m</parameter>. The type string - <parameter>types</parameter> describes the types of the field - arguments that follow. For each type specified in the type string, - one or more arguments need to be specified, in the same order as - declared in the type string.</para> - - <para>The type string is composed of the elements shown in the - table below. It contains zero or more single "complete types". - Each complete type may be one of the basic types or a fully - described container type. A container type may be a structure with - the contained types, a variant, an array with its element type, or - a dictionary entry with the contained types. The type string is - <constant>NUL</constant>-terminated.</para> - - <para>In case of a basic type, one argument of the corresponding - type is expected.</para> - - <para>A structure is denoted by a sequence of complete types - between <literal>(</literal> and <literal>)</literal>. This - sequence cannot be empty — it must contain at least one type. - Arguments corresponding to this nested sequence follow the same - rules as if they were not nested.</para> - - <para>A variant is denoted by <literal>v</literal>. Corresponding - arguments must begin with a type string denoting a complete type, - and following that, arguments corresponding to the specified type. - </para> - - <para>An array is denoted by <literal>a</literal> followed by a - complete type. Corresponding arguments must begin with the number of - entries in the array, followed by the entries themselves, - matching the element type of the array.</para> - - <para>A dictionary is an array of dictionary entries, denoted by - <literal>a</literal> followed by a pair of complete types between - <literal>{</literal> and <literal>}</literal>. The first of those - types must be a basic type. Corresponding arguments must begin - with the number of dictionary entries, followed by a pair of - values for each entry matching the element type of - the dictionary entries.</para> - - <para>For further details on the D-Bus type system, please consult - the <ulink - url="http://dbus.freedesktop.org/doc/dbus-specification.html#type-system">D-Bus - Specification</ulink>.</para> - - <table> - <title>Item type specifiers</title> - - <tgroup cols='5'> - <xi:include href="sd_bus_message_append_basic.xml" xpointer="xpointer(//table[@id='format-specifiers'])//colspec" /> - <xi:include href="sd_bus_message_append_basic.xml" xpointer="xpointer(//table[@id='format-specifiers']//thead)" /> - - <tbody> - <xi:include href="sd_bus_message_append_basic.xml" xpointer="xpointer(//table[@id='format-specifiers']//tbody/*)" /> - - <row> - <entry><literal>a</literal></entry> - <entry><constant>SD_BUS_TYPE_ARRAY</constant></entry> - <entry>array</entry> - <entry>determined by array type and size</entry> - <entry>int, followed by array contents</entry> - </row> - - <row> - <entry><literal>v</literal></entry> - <entry><constant>SD_BUS_TYPE_VARIANT</constant></entry> - <entry>variant</entry> - <entry>determined by the type argument</entry> - <entry>signature string, followed by variant contents</entry> - </row> - - <row> - <entry><literal>(</literal></entry> - <entry><constant>SD_BUS_TYPE_STRUCT_BEGIN</constant></entry> - <entry>array start</entry> - <entry morerows="1">determined by the nested types</entry> - <entry morerows="1">structure contents</entry> - </row> - <row> - <entry><literal>)</literal></entry> - <entry><constant>SD_BUS_TYPE_STRUCT_END</constant></entry> - <entry>array end</entry> - </row> - - <row> - <entry><literal>{</literal></entry> - <entry><constant>SD_BUS_TYPE_DICT_ENTRY_BEGIN</constant></entry> - <entry>dictionary entry start</entry> - <entry morerows="1">determined by the nested types</entry> - <entry morerows="1">dictionary contents</entry> - </row> - <row> - <entry><literal>}</literal></entry> - <entry><constant>SD_BUS_TYPE_DICT_ENTRY_END</constant></entry> - <entry>dictionary entry end</entry> - </row> - </tbody> - </tgroup> - </table> - - </refsect1> - - <refsect1> - <title>Types String Grammar</title> - - <programlisting>types ::= complete_type* -complete_type ::= basic_type | variant | structure | array | dictionary -basic_type ::= "y" | "n" | "q" | "u" | "i" | "x" | "t" | "d" | - "b" | "h" | - "s" | "o" | "g" -variant ::= "v" -structure ::= "(" complete_type+ ")" -array ::= "a" complete_type -dictionary ::= "a" "{" basic_type complete_type "}" -</programlisting> - </refsect1> - - <refsect1> - <title>Examples</title> - - <para>Append a single basic type (the string <literal>a string</literal>): - </para> - - <programlisting>sd_bus_message *m; -... -sd_bus_message_append(m, "s", "a string");</programlisting> - - <para>Append all types of integers:</para> - - <programlisting>uint8_t y = 1; -int16_t n = 2; -uint16_t q = 3; -int32_t i = 4; -uint32_t u = 5; -int32_t x = 6; -uint32_t t = 7; -double d = 8.0; -sd_bus_message_append(m, "ynqiuxtd", y, n, q, i, u, x, t, d);</programlisting> - - <para>Append a structure composed of a string and a D-Bus path:</para> - - <programlisting>sd_bus_message_append(m, "(so)", "a string", "/a/path"); -</programlisting> - - <para>Append an array of UNIX file descriptors:</para> - - <programlisting>sd_bus_message_append(m, "ah", 3, STDIN_FILENO, STDOUT_FILENO, STDERR_FILENO); -</programlisting> - - <para>Append a variant, with the real type "g" (signature), - and value "sdbusisgood":</para> - - <programlisting>sd_bus_message_append(m, "v", "g", "sdbusisgood");</programlisting> - - <para>Append a dictionary containing the mapping {1=>"a", 2=>"b", 3=>""}: - </para> - - <programlisting>sd_bus_message_append(m, "a{is}", 3, 1, "a", 2, "b", 3, NULL); - </programlisting> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, this call returns 0 or a positive - integer. On failure, this call returns a negative - errno-style error code.</para> - </refsect1> - - <xi:include href="sd_bus_message_append_basic.xml" xpointer="errors" /> - - <refsect1> - <title>Notes</title> - - <para><function>sd_bus_open_user()</function> and other functions - described here are available as a shared library, which can be - compiled and linked to with the - <constant>libsystemd-bus</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_append_basic</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_append_array</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_bus_message_append_array.xml b/man/sd_bus_message_append_array.xml deleted file mode 100644 index 27db2a96c3..0000000000 --- a/man/sd_bus_message_append_array.xml +++ /dev/null @@ -1,213 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_bus_message_append_array" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_bus_message_append_array</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>A monkey with a typewriter</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_bus_message_append_array</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_bus_message_append_array</refname> - <refname>sd_bus_message_append_array_memfd</refname> - <refname>sd_bus_message_append_array_iovec</refname> - <refname>sd_bus_message_append_array_space</refname> - - <refpurpose>Append an array of fields to a D-Bus - message</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int sd_bus_message_append_array</funcdef> - <paramdef>sd_bus_message *<parameter>m</parameter></paramdef> - <paramdef>char <parameter>type</parameter></paramdef> - <paramdef>char void *<parameter>ptr</parameter></paramdef> - <paramdef>size_t <parameter>size</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int sd_bus_message_append_array_memfd</funcdef> - <paramdef>sd_bus_message *<parameter>m</parameter></paramdef> - <paramdef>char <parameter>type</parameter></paramdef> - <paramdef>int <parameter>memfd</parameter></paramdef> - <paramdef>uint64_t <parameter>offset</parameter></paramdef> - <paramdef>uint64_t <parameter>size</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int sd_bus_message_append_array_iovec</funcdef> - <paramdef>sd_bus_message *<parameter>m</parameter></paramdef> - <paramdef>char <parameter>type</parameter></paramdef> - <paramdef>const struct iovec *<parameter>iov</parameter></paramdef> - <paramdef>unsigned <parameter>n</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int sd_bus_message_append_array_space</funcdef> - <paramdef>char <parameter>type</parameter></paramdef> - <paramdef>size_t <parameter>size</parameter></paramdef> - <paramdef>void **<parameter>ptr</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>The <function>sd_bus_message_append_array()</function> - function appends an array to a D-Bus message - <parameter>m</parameter>. A container will be opened, the array - contents appended, and the container closed. The parameter - <parameter>type</parameter> determines how the pointer - <parameter>p</parameter> is interpreted. - <parameter>type</parameter> must be one of the "trivial" types - <literal>y</literal>, <literal>n</literal>, <literal>q</literal>, - <literal>i</literal>, <literal>u</literal>, <literal>x</literal>, - <literal>t</literal>, <literal>d</literal> (but not - <literal>b</literal>), as defined by the <ulink - url="http://dbus.freedesktop.org/doc/dbus-specification.html#basic-types">Basic - Types</ulink> section of the D-Bus specification, and listed in - <citerefentry><refentrytitle>sd_bus_message_append_basic</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - Pointer <parameter>p</parameter> must point to an array of size - <parameter>size</parameter> bytes containing items of the - respective type. Size <parameter>size</parameter> must be a - multiple of the size of the type <parameter>type</parameter>. As a - special case, <parameter>p</parameter> may be - <constant>NULL</constant>, if <parameter>size</parameter> is 0. - The memory pointed to by <parameter>p</parameter> is copied into - the memory area containing the message and stays in possession of - the caller. The caller may hence freely change the data after this - call without affecting the message the array was appended - to.</para> - - <para>The <function>sd_bus_message_append_array_memfd()</function> - function appends an array of a trivial type to message - <parameter>m</parameter>, similar to - <function>sd_bus_message_append_array()</function>. The contents - of the memory file descriptor <parameter>memfd</parameter> - starting at the specified offset and of the specified size is - used as the contents of the array. The offset and size must be a - multiple of the size of the type - <parameter>type</parameter>. However, as a special exception, if - the offset is specified as zero and the size specified as - UINT64_MAX the full memory file descriptor contents is used. The - memory file descriptor is sealed by this call if it has not been - sealed yet, and cannot be modified after this call. See - <citerefentry - project='man-pages'><refentrytitle>memfd_create</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details about memory file descriptors. Appending arrays with - memory file descriptors enables efficient zero-copy data transfer, - as the memory file descriptor may be passed as-is to the - destination, without copying the memory in it to the destination - process. Not all protocol transports support passing memory file - descriptors between participants, in which case this call will - automatically fall back to copying. Also, as memory file - descriptor passing is inefficient for smaller amounts of data, - copying might still be enforced even where memory file descriptor - passing is supported.</para> - - <para>The <function>sd_bus_message_append_array_iovec()</function> - function appends an array of a trivial type to the message - <parameter>m</parameter>, similar to - <function>sd_bus_message_append_array()</function>. Contents of - the I/O vector array <parameter>iov</parameter> are used as the - contents of the array. The total size of - <parameter>iov</parameter> payload (the sum of - <structfield>iov_len</structfield> fields) must be a multiple of - the size of the type <parameter>type</parameter>. The - <parameter>iov</parameter> argument must point to - <parameter>n</parameter> I/O vector structures. Each structure may - have the <structname>iov_base</structname> field set, in which - case the memory pointed to will be copied into the message, or - unset (set to zero), in which case a block of zeros of length - <structname>iov_len</structname> bytes will be inserted. The - memory pointed at by <parameter>iov</parameter> may be changed - after this call.</para> - - <para>The <function>sd_bus_message_append_array_space()</function> - function appends space for an array of a trivial type to message - <parameter>m</parameter>. It behaves the same as - <function>sd_bus_message_append_array()</function>, but instead of - copying items to the message, it returns a pointer to the - destination area to the caller in pointer - <parameter>p</parameter>. The caller should subsequently write the - array contents to this memory. Modifications to the memory - pointed to should only occur until the next operation on the bus - message is invoked. Most importantly, the memory should not be - altered anymore when another field has been added to the message - or the message has been sealed.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, these calls return 0 or a positive integer. On - failure, they return a negative errno-style error code.</para> - </refsect1> - - <xi:include href="sd_bus_message_append_basic.xml" xpointer="errors" /> - - <refsect1> - <title>Notes</title> - - <para><function>sd_bus_append_array()</function> and other - functions described here are available as a shared library, which - can be compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_append</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_append_basic</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>memfd_create</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - <ulink url="http://dbus.freedesktop.org/doc/dbus-specification.html">The D-Bus specification</ulink> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_bus_message_append_basic.xml b/man/sd_bus_message_append_basic.xml deleted file mode 100644 index 276953af69..0000000000 --- a/man/sd_bus_message_append_basic.xml +++ /dev/null @@ -1,295 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_bus_message_append_basic"> - - <refentryinfo> - <title>sd_bus_message_append_basic</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>A monkey with a typewriter</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_bus_message_append_basic</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_bus_message_append_basic</refname> - - <refpurpose>Attach a single field to a message</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int sd_bus_message_append_basic</funcdef> - <paramdef>sd_bus_message *<parameter>m</parameter></paramdef> - <paramdef>char <parameter>type</parameter></paramdef> - <paramdef>const void *<parameter>p</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_bus_message_append_basic()</function> appends a - single field to the message <parameter>m</parameter>. The - parameter <parameter>type</parameter> determines how the pointer - <parameter>p</parameter> is interpreted. - <parameter>type</parameter> must be one of the basic types as - defined by the <ulink - url="http://dbus.freedesktop.org/doc/dbus-specification.html#basic-types">Basic - Types</ulink> section of the D-Bus specification, and listed in - the table below. - </para> - - <table id='format-specifiers'> - <title>Item type specifiers</title> - - <tgroup cols='5'> - <colspec colname='specifier' /> - <colspec colname='constant' /> - <colspec colname='description' /> - <colspec colname='size' /> - <colspec colname='ctype' /> - <thead> - <row> - <entry>Specifier</entry> - <entry>Constant</entry> - <entry>Description</entry> - <entry>Size</entry> - <entry>Expected C Type</entry> - </row> - </thead> - <tbody> - <row> - <entry><literal>y</literal></entry> - <entry><constant>SD_BUS_TYPE_BYTE</constant></entry> - <entry>unsigned integer</entry> - <entry>1 byte</entry> - <entry>uint8_t</entry> - </row> - - <row> - <entry><literal>b</literal></entry> - <entry><constant>SD_BUS_TYPE_BOOLEAN</constant></entry> - <entry>boolean</entry> - <entry>4 bytes</entry> - <entry>int</entry> - </row> - - <row> - <entry><literal>n</literal></entry> - <entry><constant>SD_BUS_TYPE_INT16</constant></entry> - <entry>signed integer</entry> - <entry>2 bytes</entry> - <entry>int16_t</entry> - </row> - - <row> - <entry><literal>q</literal></entry> - <entry><constant>SD_BUS_TYPE_UINT16</constant></entry> - <entry>unsigned integer</entry> - <entry>2 bytes</entry> - <entry>uint16_t</entry> - </row> - - <row> - <entry><literal>i</literal></entry> - <entry><constant>SD_BUS_TYPE_INT32</constant></entry> - <entry>signed integer</entry> - <entry>4 bytes</entry> - <entry>int32_t</entry> - </row> - - <row> - <entry><literal>u</literal></entry> - <entry><constant>SD_BUS_TYPE_UINT32</constant></entry> - <entry>unsigned integer</entry> - <entry>4 bytes</entry> - <entry>uint32_t</entry> - </row> - - <row> - <entry><literal>x</literal></entry> - <entry><constant>SD_BUS_TYPE_INT64</constant></entry> - <entry>signed integer</entry> - <entry>8 bytes</entry> - <entry>int64_t</entry> - </row> - - <row> - <entry><literal>t</literal></entry> - <entry><constant>SD_BUS_TYPE_UINT64</constant></entry> - <entry>unsigned integer</entry> - <entry>8 bytes</entry> - <entry>uint64_t</entry> - </row> - - <row> - <entry><literal>d</literal></entry> - <entry><constant>SD_BUS_TYPE_DOUBLE</constant></entry> - <entry>floating-point</entry> - <entry>8 bytes</entry> - <entry>double</entry> - </row> - - <row> - <entry><literal>s</literal></entry> - <entry><constant>SD_BUS_TYPE_STRING</constant></entry> - <entry>Unicode string</entry> - <entry>variable</entry> - <entry>char[]</entry> - </row> - - <row> - <entry><literal>o</literal></entry> - <entry><constant>SD_BUS_TYPE_OBJECT_PATH</constant></entry> - <entry>object path</entry> - <entry>variable</entry> - <entry>char[]</entry> - </row> - - <row> - <entry><literal>g</literal></entry> - <entry><constant>SD_BUS_TYPE_SIGNATURE</constant></entry> - <entry>signature</entry> - <entry>variable</entry> - <entry>char[]</entry> - </row> - - <row> - <entry><literal>h</literal></entry> - <entry><constant>SD_BUS_TYPE_UNIX_FD</constant></entry> - <entry>UNIX file descriptor</entry> - <entry>4 bytes</entry> - <entry>int</entry> - </row> - </tbody> - </tgroup> - </table> - - <para>The value of the parameter is copied into a memory area held - by the message object, stays in the possession of the caller and - may hence be freely changed after this call without affecting the - bus message it has been added to. If <parameter>type</parameter> - is <literal>h</literal> (UNIX file descriptor), the descriptor is - duplicated by this call and the passed descriptor stays in - possession of the caller.</para> - - <para>For types <literal>s</literal>, <literal>o</literal>, and - <literal>g</literal>, the parameter <parameter>p</parameter> is - interpreted as a pointer to a <constant>NUL</constant>-terminated - character sequence. As a special case, a <constant>NULL</constant> - pointer is interpreted as an empty string. The string should be - valid Unicode string encoded as UTF-8. In case of the two latter - types, the additional requirements for a D-Bus object path or - type signature should be satisfied. Those requirements should be - verified by the recipient of the message. - </para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, this call returns 0 or a positive integer. On - failure, it returns a negative errno-style error code.</para> - </refsect1> - - <refsect1 id='errors'> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>Specified parameter is invalid. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EPERM</constant></term> - - <listitem><para>Message has been sealed. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ESTALE</constant></term> - - <listitem><para>Message is in invalid state. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENXIO</constant></term> - - <listitem><para>Message cannot be appended to. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Memory allocation failed.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_bus_append_basic()</function> function - described here is available as a shared library, which can be - compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_append</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <ulink url="http://dbus.freedesktop.org/doc/dbus-specification.html">The D-Bus specification</ulink> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_bus_message_append_string_memfd.xml b/man/sd_bus_message_append_string_memfd.xml deleted file mode 100644 index 9e99999bf3..0000000000 --- a/man/sd_bus_message_append_string_memfd.xml +++ /dev/null @@ -1,153 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_bus_message_append_string_memfd" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_bus_message_append_string_memfd</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>A monkey with a typewriter</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_bus_message_append_string_memfd</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_bus_message_append_string_memfd</refname> - <refname>sd_bus_message_append_string_iovec</refname> - <refname>sd_bus_message_append_string_space</refname> - - <refpurpose>Attach a string to a message</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int sd_bus_message_append_string_memfd</funcdef> - <paramdef>sd_bus_message *<parameter>m</parameter></paramdef> - <paramdef>int <parameter>memfd</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int sd_bus_message_append_string_iovec</funcdef> - <paramdef>sd_bus_message *<parameter>m</parameter></paramdef> - <paramdef>const struct iovec *<parameter>iov</parameter></paramdef> - <paramdef>unsigned <parameter>n</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int sd_bus_message_append_string_space</funcdef> - <paramdef>sd_bus_message *<parameter>m</parameter></paramdef> - <paramdef>size_t <parameter>size</parameter></paramdef> - <paramdef>char **<parameter>s</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>The functions - <function>sd_bus_message_append_string_memfd</function> and - <function>sd_bus_message_append_string_iovec</function> can be - used to append a single string (item of type <literal>s</literal>) - to message <parameter>m</parameter>.</para> - - <para>In case of - <function>sd_bus_message_append_string_memfd</function>, the - contents of <parameter>memfd</parameter> are the string. They must - satisfy the same constraints as described for the - <literal>s</literal> type in - <citerefentry><refentrytitle>sd_bus_message_append_basic</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para>In case of - <function>sd_bus_message_append_string_iovec</function>, the - payload of <parameter>iov</parameter> is the string. It must - satisfy the same constraints as described for the - <literal>s</literal> type in - <citerefentry><refentrytitle>sd_bus_message_append_basic</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para>The <parameter>iov</parameter> argument must point to - <parameter>n</parameter> <structname>struct iovec</structname> - structures. Each structure may have the - <structname>iov_base</structname> field set, in which case the - memory pointed to will be copied into the message, or unset, in - which case a block of spaces (ASCII 32) of length - <structname>iov_len</structname> will be inserted. The - memory pointed at by <parameter>iov</parameter> may be changed - after this call.</para> - - <para>The - <function>sd_bus_message_append_string_space</function> function appends - space for a string to message <parameter>m</parameter>. It behaves - similar to <function>sd_bus_message_append_basic</function> with - type <literal>s</literal>, but instead of copying a string into - the message, it returns a pointer to the destination area to - the caller in pointer <parameter>p</parameter>. Space for the string - of length <parameter>size</parameter> plus the terminating - <constant>NUL</constant> is allocated.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, those calls return 0 or a positive integer. On - failure, they returns a negative errno-style error code.</para> - </refsect1> - - <xi:include href="sd_bus_message_append_basic.xml" xpointer="errors" /> - - <refsect1> - <title>Notes</title> - - <para>The functions described here are available as a shared library, - which can be compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_append_basic</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <ulink url="http://dbus.freedesktop.org/doc/dbus-specification.html">The D-Bus specification</ulink> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_bus_message_append_strv.xml b/man/sd_bus_message_append_strv.xml deleted file mode 100644 index 0f77adcc8b..0000000000 --- a/man/sd_bus_message_append_strv.xml +++ /dev/null @@ -1,116 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_bus_message_append_strv" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_bus_message_append_strv</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>A monkey with a typewriter</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_bus_message_append_strv</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_bus_message_append_strv</refname> - - <refpurpose>Attach an array of strings to a message</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int sd_bus_message_append_strv</funcdef> - <paramdef>sd_bus_message *<parameter>m</parameter></paramdef> - <paramdef>char **<parameter>l</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>The <function>sd_bus_message_append</function> function can be - used to append an array of strings to message - <parameter>m</parameter>. The parameter <parameter>l</parameter> - shall point to a <constant>NULL</constant>-terminated array of pointers - to <constant>NUL</constant>-terminated strings. Each string must - satisfy the same constraints as described for the - <literal>s</literal> type in - <citerefentry><refentrytitle>sd_bus_message_append_basic</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - </para> - - <para>The memory pointed at by <parameter>p</parameter> and the - contents of the strings themselves are copied into the memory area - containing the message and may be changed after this call. Note - that the signature of <parameter>l</parameter> parameter is to be - treated as <type>const char *const *</type>, and the contents - will not be modified.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, this call returns 0 or a positive integer. On - failure, a negative errno-style error code is returned.</para> - </refsect1> - - <xi:include href="sd_bus_message_append_basic.xml" xpointer="errors" /> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_bus_append_append_strv()</function> function - described here is available as a shared library, which can be - compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_append</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_append_array</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <ulink url="http://dbus.freedesktop.org/doc/dbus-specification.html">The D-Bus specification</ulink> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_bus_message_get_cookie.xml b/man/sd_bus_message_get_cookie.xml deleted file mode 100644 index 3328eead3d..0000000000 --- a/man/sd_bus_message_get_cookie.xml +++ /dev/null @@ -1,146 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2013 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_bus_message_get_cookie"> - - <refentryinfo> - <title>sd_bus_message_get_cookie</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_bus_message_get_cookie</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_bus_message_get_cookie</refname> - <refname>sd_bus_message_get_reply_cookie</refname> - <refpurpose>Returns the transaction cookie of a message</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_bus_message_get_cookie</function></funcdef> - <paramdef>sd_bus_message *<parameter>message</parameter></paramdef> - <paramdef>uint64_t *<parameter>cookie</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_message_get_reply_cookie</function></funcdef> - <paramdef>sd_bus_message *<parameter>message</parameter></paramdef> - <paramdef>uint64_t *<parameter>cookie</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_bus_message_get_cookie()</function> returns the - transaction cookie of a message. The cookie uniquely identifies a - message within each bus peer, but is not globally unique. It is - assigned when a message is sent.</para> - - <para><function>sd_bus_message_get_reply_cookie()</function> - returns the transaction cookie of the message the specified - message is a response to. When a reply message is generated for a - method call message, its cookie is copied over into this field. - Note that while every message that is transferred is identified by - a cookie, only response messages carry a reply cookie - field.</para> - - <para>Both functions take a message object as first parameter and - a place to store the 64-bit cookie in.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, these calls return 0 or a positive integer. On - failure, these calls return a negative errno-style error - code.</para> - - <para>On success, the cookie/reply cookie is returned in the - specified 64-bit unsigned integer variable.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>A specified parameter - is invalid.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENODATA</constant></term> - - <listitem><para>No cookie has been assigned to this message. - This either indicates that the message has not been sent yet - and hence has no cookie assigned, or that the message is not a - method response message and hence carries a reply cookie - field.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_bus_message_get_cookie()</function> and - <function>sd_bus_message_get_reply_cookie()</function> interfaces - are available as a shared library, which can be compiled and - linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_new</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_bus_message_get_monotonic_usec.xml b/man/sd_bus_message_get_monotonic_usec.xml deleted file mode 100644 index 2c0a8a5d54..0000000000 --- a/man/sd_bus_message_get_monotonic_usec.xml +++ /dev/null @@ -1,181 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2013 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_bus_message_get_monotonic_usec"> - - <refentryinfo> - <title>sd_bus_message_get_monotonic_usec</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_bus_message_get_monotonic_usec</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_bus_message_get_monotonic_usec</refname> - <refname>sd_bus_message_get_realtime_usec</refname> - <refname>sd_bus_message_get_seqnum</refname> - <refpurpose>Retrieve the sender timestamps and sequence number of a message</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_bus_message_get_monotonic_usec</function></funcdef> - <paramdef>sd_bus_message *<parameter>message</parameter></paramdef> - <paramdef>uint64_t *<parameter>usec</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_message_get_realtime_usec</function></funcdef> - <paramdef>sd_bus_message *<parameter>message</parameter></paramdef> - <paramdef>uint64_t *<parameter>usec</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_message_get_seqnum</function></funcdef> - <paramdef>sd_bus_message *<parameter>message</parameter></paramdef> - <paramdef>uint64_t *<parameter>seqnum</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_bus_message_get_monotonic_usec()</function> - returns the monotonic timestamp of the time the message was sent. - This value is in microseconds since the - <constant>CLOCK_MONOTONIC</constant> epoch, see - <citerefentry><refentrytitle>clock_gettime</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details.</para> - - <para>Similarly, - <function>sd_bus_message_get_realtime_usec()</function> returns - the realtime (wallclock) timestamp of the time the message was - sent. This value is in microseconds since Jan 1st, 1970, i.e. in - the <constant>CLOCK_REALTIME</constant> clock.</para> - - <para><function>sd_bus_message_get_seqnum()</function> returns the - kernel-assigned sequence number of the message. The kernel assigns - a global, monotonically increasing sequence number to all messages - transmitted on the local system, at the time the message was sent. - This sequence number is useful for determining message send order, - even across different buses of the local system. The sequence - number combined with the boot ID of the system (as returned by - <citerefentry><refentrytitle>sd_id128_get_boot</refentrytitle><manvolnum>3</manvolnum></citerefentry>) - is a suitable globally unique identifier for bus messages.</para> - - <para>Note that the sending order and receiving order of messages - might differ, in particular for broadcast messages. This means - that the sequence number and the timestamps of messages a client - reads are not necessarily monotonically increasing.</para> - - <para>These timestamps and the sequence number are attached to - each message by the kernel and cannot be manipulated by the - sender.</para> - - <para>Note that these timestamps are only available on some bus - transports, and only after support for them has been negotiated - with the - <citerefentry><refentrytitle>sd_bus_negotiate_timestamp</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, these calls return 0 or a positive integer. On - failure, these calls return a negative errno-style error - code.</para> - - <para>On success, the timestamp or sequence number is returned in - the specified 64-bit unsigned integer variable.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>A specified parameter is - invalid.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENODATA</constant></term> - - <listitem><para>No timestamp or sequence number information is - attached to the passed message. This error is returned if the - underlying transport does not support timestamping or - assigning of sequence numbers, or if this feature has not been - negotiated with - <citerefentry><refentrytitle>sd_bus_negotiate_timestamp</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The - <function>sd_bus_message_get_monotonic_usec()</function>, - <function>sd_bus_message_get_realtime_usec()</function>, and - <function>sd_bus_message_get_seqnum()</function> interfaces are - available as a shared library, which can be compiled and linked to - with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_negotiate_timestamp</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>clock_gettime</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_id128_get_boot</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_bus_negotiate_fds.xml b/man/sd_bus_negotiate_fds.xml deleted file mode 100644 index a538b13cf0..0000000000 --- a/man/sd_bus_negotiate_fds.xml +++ /dev/null @@ -1,200 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_bus_negotiate_fds"> - - <refentryinfo> - <title>sd_bus_negotiate_fds</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_bus_negotiate_fds</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_bus_negotiate_fds</refname> - <refname>sd_bus_negotiate_timestamp</refname> - <refname>sd_bus_negotiate_creds</refname> - - <refpurpose>Control feature negotiation on bus connections</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_bus_negotiate_fds</function></funcdef> - <paramdef>sd_bus *<parameter>bus</parameter></paramdef> - <paramdef>int <parameter>b</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_negotiate_timestamp</function></funcdef> - <paramdef>sd_bus *<parameter>bus</parameter></paramdef> - <paramdef>int <parameter>b</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_negotiate_creds</function></funcdef> - <paramdef>sd_bus *<parameter>bus</parameter></paramdef> - <paramdef>int <parameter>b</parameter></paramdef> - <paramdef>uint64_t <parameter>mask</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_bus_negotiate_fds()</function> controls whether - file descriptor passing shall be negotiated for the specified bus - connection. It takes a bus object and a boolean, which, when true, - enables file descriptor passing, and, when false, disables - it. Note that not all transports and servers support file - descriptor passing. In particular, networked transports generally - do not support file descriptor passing. To find out whether file - descriptor passing is available after negotiation, use - <citerefentry><refentrytitle>sd_bus_can_send</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and pass <constant>SD_BUS_TYPE_UNIX_FD</constant>. Note that file - descriptor passing is always enabled for both sending and - receiving or for neither, but never only in one direction. By - default, file descriptor passing is negotiated for all - connections.</para> - - <para>Note that when bus activation is used, it is highly - recommended to set the <option>AcceptFileDescriptors=</option> - setting in the <filename>.busname</filename> unit file to the same - setting as negotiated by the program ultimately activated. By - default, file descriptor passing is enabled for both.</para> - - <para><function>sd_bus_negotiate_timestamps()</function> controls - whether implicit sender timestamps shall be attached automatically - to all incoming messages. Takes a bus object and a boolean, which, - when true, enables timestamping, and, when false, disables it. - Use - <citerefentry><refentrytitle>sd_bus_message_get_monotonic_usec</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_get_realtime_usec</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_get_seqnum</refentrytitle><manvolnum>3</manvolnum></citerefentry> - to query the timestamps of incoming messages. If negotiation is - disabled or not supported, these calls will fail with - <constant>-ENODATA</constant>. Note that not all transports - support timestamping of messages. Specifically, timestamping is - only available on the kdbus transport, but not on dbus1. The - timestamping is applied by the kernel and cannot be manipulated by - userspace. By default, message timestamping is not negotiated for - connections.</para> - - <para><function>sd_bus_negotiate_creds()</function> controls - whether and which implicit sender credentials shall be attached - automatically to all incoming messages. Takes a bus object and a - boolean indicating whether to enable or disable the credential - parts encoded in the bit mask value argument. Note that not all - transports support attaching sender credentials to messages, or do - not support all types of sender credential parameters, or might - suppress them under certain circumstances for individual - messages. Specifically, implicit sender credentials on messages - are only fully supported on kdbus transports, and dbus1 only - supports <constant>SD_BUS_CREDS_UNIQUE_NAME</constant>. The sender - credentials are attached by the kernel and cannot be manipulated - by userspace, and are thus suitable for authorization - decisions. By default, only - <constant>SD_BUS_CREDS_WELL_KNOWN_NAMES</constant> and - <constant>SD_BUS_CREDS_UNIQUE_NAME</constant> are enabled. In - fact, these two credential fields are always sent along and cannot - be turned off.</para> - - <para>The <function>sd_bus_negotiate_fds()</function> function may - be called only before the connection has been started with - <citerefentry><refentrytitle>sd_bus_start</refentrytitle><manvolnum>3</manvolnum></citerefentry>. Both - <function>sd_bus_negotiate_timestamp()</function> and - <function>sd_bus_negotiate_creds()</function> may also be called - after a connection has been set up. Note that, when operating on a - connection that is shared between multiple components of the same - program (for example via - <citerefentry><refentrytitle>sd_bus_default</refentrytitle><manvolnum>3</manvolnum></citerefentry>), - it is highly recommended to only enable additional per message - metadata fields, but never disable them again, in order not to - disable functionality needed by other components.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, these functions return 0 or a - positive integer. On failure, they return a negative errno-style - error code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-EPERM</constant></term> - - <listitem><para>The bus connection has already been started.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para><function>sd_bus_negotiate_fds()</function> and the other - functions described here are available as a shared library, which - can be compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_start</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_can_send</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_get_monotonic_usec</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_get_realtime_usec</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_get_seqnum</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_message_get_creds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.busname</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_bus_new.xml b/man/sd_bus_new.xml deleted file mode 100644 index d281b5dd44..0000000000 --- a/man/sd_bus_new.xml +++ /dev/null @@ -1,189 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_bus_new"> - - <refentryinfo> - <title>sd_bus_new</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>A monkey with a typewriter</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_bus_new</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_bus_new</refname> - <refname>sd_bus_ref</refname> - <refname>sd_bus_unref</refname> - <refname>sd_bus_unrefp</refname> - - <refpurpose>Create a new bus object and create or destroy references to it</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_bus_new</function></funcdef> - <paramdef>sd_bus **<parameter>bus</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>sd_bus *<function>sd_bus_ref</function></funcdef> - <paramdef>sd_bus *<parameter>bus</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>sd_bus *<function>sd_bus_unref</function></funcdef> - <paramdef>sd_bus *<parameter>bus</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>void <function>sd_bus_unrefp</function></funcdef> - <paramdef>sd_bus **<parameter>bus</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_bus_new()</function> creates a new bus - object. This object is reference-counted, and will be destroyed - when all references are gone. Initially, the caller of this - function owns the sole reference and the bus object will not be - connected to any bus. To connect it to a bus, make sure - to set an address with - <citerefentry><refentrytitle>sd_bus_set_address</refentrytitle><manvolnum>3</manvolnum></citerefentry> - or a related call, and then start the connection with - <citerefentry><refentrytitle>sd_bus_start</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para>In most cases, it is a better idea to invoke - <citerefentry><refentrytitle>sd_bus_default_user</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_default_system</refentrytitle><manvolnum>3</manvolnum></citerefentry> - or related calls instead of the more low-level - <function>sd_bus_new()</function> and - <function>sd_bus_start()</function>. The higher-level calls not - only allocate a bus object but also start the connection to a - well-known bus in a single function invocation.</para> - - <para><function>sd_bus_ref()</function> increases the reference - counter of <parameter>bus</parameter> by one.</para> - - <para><function>sd_bus_unref()</function> decreases the reference - counter of <parameter>bus</parameter> by one. Once the reference - count has dropped to zero, <parameter>bus</parameter> is destroyed - and cannot be used anymore, so further calls to - <function>sd_bus_ref()</function> or - <function>sd_bus_unref()</function> are illegal.</para> - - <para><function>sd_bus_unrefp()</function> is similar to - <function>sd_bus_unref()</function> but takes a pointer to a - pointer to an <type>sd_bus</type> object. This call is useful in - conjunction with GCC's and LLVM's <ulink - url="https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html">Clean-up - Variable Attribute</ulink>. Note that this function is defined as - inline function. Use a declaration like the following, in order to - allocate a bus object that is freed automatically as the code - block is left:</para> - - <programlisting>{ - __attribute__((cleanup(sd_bus_unrefp)) sd_bus *bus = NULL; - int r; - … - r = sd_bus_default(&bus); - if (r < 0) - fprintf(stderr, "Failed to allocate bus: %s\n", strerror(-r)); - … -}</programlisting> - - <para><function>sd_bus_ref()</function>, - <function>sd_bus_unref()</function> and - <function>sd_bus_unrefp()</function> execute no operation if the - passed in bus object is <constant>NULL</constant>.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, <function>sd_bus_new()</function> returns 0 or a - positive integer. On failure, it returns a negative errno-style - error code.</para> - - <para><function>sd_bus_ref()</function> always returns the argument. - </para> - - <para><function>sd_bus_unref()</function> always returns - <constant>NULL</constant>.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Memory allocation failed.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para><function>sd_bus_new()</function> and other functions - described here are available as a shared library, which can be - compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_default_user</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_default_system</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_open_user</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_open_system</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_bus_path_encode.xml b/man/sd_bus_path_encode.xml deleted file mode 100644 index 3088243e45..0000000000 --- a/man/sd_bus_path_encode.xml +++ /dev/null @@ -1,188 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_bus_path_encode"> - - <refentryinfo> - <title>sd_bus_path_encode</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>A monkey with a typewriter</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_bus_path_encode</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_bus_path_encode</refname> - <refname>sd_bus_path_encode_many</refname> - <refname>sd_bus_path_decode</refname> - <refname>sd_bus_path_decode_many</refname> - - <refpurpose>Convert an external identifier into an object path and back</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_bus_path_encode</function></funcdef> - <paramdef>const char *<parameter>prefix</parameter></paramdef> - <paramdef>const char *<parameter>external_id</parameter></paramdef> - <paramdef>char **<parameter>ret_path</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_path_encode_many</function></funcdef> - <paramdef>char **<parameter>out</parameter></paramdef> - <paramdef>const char *<parameter>path_template</parameter></paramdef> - <paramdef>...</paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_path_decode</function></funcdef> - <paramdef>const char *<parameter>path</parameter></paramdef> - <paramdef>const char *<parameter>prefix</parameter></paramdef> - <paramdef>char **<parameter>ret_external_id</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_path_decode_many</function></funcdef> - <paramdef>const char *<parameter>path</parameter></paramdef> - <paramdef>const char *<parameter>path_template</parameter></paramdef> - <paramdef>...</paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_bus_path_encode()</function> and - <function>sd_bus_path_decode()</function> convert external - identifier strings into object paths and back. These functions are - useful to map application-specific string identifiers of any kind - into bus object paths in a simple, reversible and safe way.</para> - - <para><function>sd_bus_path_encode()</function> takes a bus path - prefix and an external identifier string as arguments, plus a - place to store the returned bus path string. The bus path prefix - must be a valid bus path, starting with a slash - <literal>/</literal>, and not ending in one. The external - identifier string may be in any format, may be the empty string, - and has no restrictions on the charset — however, it must - always be <constant>NUL</constant>-terminated. The returned string - will be the concatenation of the bus path prefix plus an escaped - version of the external identifier string. This operation may be - reversed with <function>sd_bus_decode()</function>. It is - recommended to only use external identifiers that generally - require little escaping to be turned into valid bus path - identifiers (for example, by sticking to a 7-bit ASCII character - set), in order to ensure the resulting bus path is still short and - easily processed.</para> - - <para><function>sd_bus_path_decode()</function> reverses the - operation of <function>sd_bus_path_encode()</function> and thus - regenerates an external identifier string from a bus path. It - takes a bus path and a prefix string, plus a place to store the - returned external identifier string. If the bus path does not - start with the specified prefix, 0 is returned and the returned - string is set to <constant>NULL</constant>. Otherwise, the - string following the prefix is unescaped and returned in the - external identifier string.</para> - - <para>The escaping used will replace all characters which are - invalid in a bus object path by <literal>_</literal>, followed by a - hexadecimal value. As a special case, the empty string will be - replaced by a lone <literal>_</literal>.</para> - - <para><function>sd_bus_path_encode_many()</function> works like - its counterpart <function>sd_bus_path_encode()</function>, but - takes a path template as argument and encodes multiple labels - according to its embedded directives. For each - <literal>%</literal> character found in the template, the caller - must provide a string via varargs, which will be encoded and - embedded at the position of the <literal>%</literal> character. - Any other character in the template is copied verbatim into the - encoded path.</para> - - <para><function>sd_bus_path_decode_many()</function> does the - reverse of <function>sd_bus_path_encode_many()</function>. It - decodes the passed object path according to the given - path template. For each <literal>%</literal> character in the - template, the caller must provide an output storage - (<literal>char **</literal>) via varargs. The decoded label - will be stored there. Each <literal>%</literal> character will - only match the current label. It will never match across labels. - Furthermore, only a single directive is allowed per label. - If <literal>NULL</literal> is passed as output storage, the - label is verified but not returned to the caller.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, <function>sd_bus_path_encode()</function> - returns positive or 0, and a valid bus path in the return - argument. On success, <function>sd_bus_path_decode()</function> - returns a positive value if the prefixed matched, or 0 if it - did not. If the prefix matched, the external identifier is returned - in the return parameter. If it did not match, NULL is returned in - the return parameter. On failure, a negative errno-style error - number is returned by either function. The returned strings must - be - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry>'d - by the caller.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para><function>sd_bus_path_encode()</function> and - <function>sd_bus_path_decode()</function> are available as a - shared library, which can be compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_bus_request_name.xml b/man/sd_bus_request_name.xml deleted file mode 100644 index f07ae09555..0000000000 --- a/man/sd_bus_request_name.xml +++ /dev/null @@ -1,213 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2013 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_bus_request_name"> - - <refentryinfo> - <title>sd_bus_request_name</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_bus_request_name</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_bus_request_name</refname> - <refname>sd_bus_release_name</refname> - <refpurpose>Request or release a well-known service name on a bus</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-bus.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_bus_request_name</function></funcdef> - <paramdef>sd_bus *<parameter>bus</parameter></paramdef> - <paramdef>const char *<parameter>name</parameter></paramdef> - <paramdef>uint64_t <parameter>flags</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_bus_release_name</function></funcdef> - <paramdef>sd_bus *<parameter>bus</parameter></paramdef> - <paramdef>const char *<parameter>name</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_bus_request_name()</function> requests a - well-known service name on a bus. It takes a bus connection, a - valid bus name and a flags parameter. The flags parameter is a - combination of the following flags:</para> - - <variablelist> - <varlistentry> - <term><varname>SD_BUS_NAME_ALLOW_REPLACEMENT</varname></term> - - <listitem><para>After acquiring the name successfully, permit - other peers to take over the name when they try to acquire it - with the <varname>SD_BUS_NAME_REPLACE_EXISTING</varname> flag - set. If <varname>SD_BUS_NAME_ALLOW_REPLACEMENT</varname> is - not set on the original request, such a request by other peers - will be denied.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SD_BUS_NAME_REPLACE_EXISTING</varname></term> - - <listitem><para>Take over the name if it is already acquired - by another peer, and that other peer has permitted takeover by - setting <varname>SD_BUS_NAME_ALLOW_REPLACEMENT</varname> while - acquiring it.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SD_BUS_NAME_QUEUE</varname></term> - - <listitem><para>Queue the acquisition of the name when the - name is already taken.</para></listitem> - </varlistentry> - </variablelist> - - <para><function>sd_bus_release_name()</function> releases an - acquired well-known name. It takes a bus connection and a valid - bus name as parameters.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, these calls return 0 or a positive integer. On - failure, these calls return a negative errno-style error - code.</para> - - <para>If <varname>SD_BUS_NAME_QUEUE</varname> is specified, - <function>sd_bus_request_name()</function> will return 0 when the - name is already taken by another peer and the client has been - added to the queue for the name. In that case, the caller can - subscribe to <literal>NameOwnerChanged</literal> signals to be - notified when the name is successfully acquired. - <function>sd_bus_request_name()</function> returns > 0 when the - name has immediately been acquired successfully.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-EALREADY</constant></term> - - <listitem><para>The caller already is the owner of the - specified name.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EEXIST</constant></term> - - <listitem><para>The name has already been acquired by a - different peer, and SD_BUS_NAME_REPLACE_EXISTING was not - specified or the other peer did not specify - SD_BUS_NAME_ALLOW_REPLACEMENT while acquiring the - name.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ESRCH</constant></term> - - <listitem><para>It was attempted to release a name that is - currently not registered on the bus.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EADDRINUSE</constant></term> - - <listitem><para>It was attempted to release a name that is - owned by a different peer on the bus.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>A specified parameter is invalid. This is also - generated when the requested name is a special service name - reserved by the D-Bus specification, or when the operation is - requested on a connection that does not refer to a - bus.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOTCONN</constant></term> - - <listitem><para>The bus connection has been - disconnected.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ECHILD</constant></term> - - <listitem><para>The bus connection has been created in a - different process than the current one.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_bus_acquire_name()</function> and - <function>sd_bus_release_name()</function> interfaces are - available as a shared library, which can be compiled and linked to - with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-bus</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_bus_new</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_add_child.xml b/man/sd_event_add_child.xml deleted file mode 100644 index bc732db7fa..0000000000 --- a/man/sd_event_add_child.xml +++ /dev/null @@ -1,246 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_add_child" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_add_child</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>More text</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_add_child</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_add_child</refname> - <refname>sd_event_source_get_child_pid</refname> - <refname>sd_event_child_handler_t</refname> - - <refpurpose>Add a child process state change event source to an event loop</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcsynopsisinfo><token>typedef</token> struct sd_event_source sd_event_source;</funcsynopsisinfo> - - <funcprototype> - <funcdef>typedef int (*<function>sd_event_child_handler_t</function>)</funcdef> - <paramdef>sd_event_source *<parameter>s</parameter></paramdef> - <paramdef>const siginfo_t *<parameter>si</parameter></paramdef> - <paramdef>void *<parameter>userdata</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_add_child</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - <paramdef>sd_event_source **<parameter>source</parameter></paramdef> - <paramdef>pid_t <parameter>pid</parameter></paramdef> - <paramdef>int <parameter>options</parameter></paramdef> - <paramdef>sd_event_child_handler_t <parameter>handler</parameter></paramdef> - <paramdef>void *<parameter>userdata</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_source_get_child_pid</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>pid_t *<parameter>pid</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_add_child()</function> adds a new child - process state change event source to an event loop. The event loop - object is specified in the <parameter>event</parameter> parameter, - the event source object is returned in the - <parameter>source</parameter> parameter. The - <parameter>pid</parameter> parameter specifies the PID of the - process to watch. The <parameter>handler</parameter> must - reference a function to call when the process changes state. The - handler function will be passed the - <parameter>userdata</parameter> pointer, which may be chosen - freely by the caller. The handler also receives a pointer to a - <structname>siginfo_t</structname> structure containing - information about the child process event. The - <parameter>options</parameter> parameter determines which state - changes will be watched for. It must contain an OR-ed mask of - <constant>WEXITED</constant> (watch for the child process - terminating), <constant>WSTOPPED</constant> (watch for the child - process being stopped by a signal), and - <constant>WCONTINUED</constant> (watch for the child process being - resumed by a signal). See <citerefentry - project='man-pages'><refentrytitle>waitid</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for further information.</para> - - <para>Only a single handler may be installed for a specific - child process. The handler is enabled for a single event - (<constant>SD_EVENT_ONESHOT</constant>), but this may be changed - with - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - If the handler function returns a negative error code, it will be - disabled after the invocation, even if the - <constant>SD_EVENT_ON</constant> mode was requested before. - </para> - - <para>To destroy an event source object use - <citerefentry><refentrytitle>sd_event_source_unref</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - but note that the event source is only removed from the event loop - when all references to the event source are dropped. To make sure - an event source does not fire anymore, even when there's still a - reference to it kept, consider setting the event source to - <constant>SD_EVENT_OFF</constant> with - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para>If the second parameter of - <function>sd_event_add_child()</function> is passed as NULL no - reference to the event source object is returned. In this case the - event source is considered "floating", and will be destroyed - implicitly when the event loop itself is destroyed.</para> - - <para>Note that the <parameter>handler</parameter> function is - invoked at a time where the child process is not reaped yet (and - thus still is exposed as a zombie process by the kernel). However, - the child will be reaped automatically after the function - returns. Child processes for which no child process state change - event sources are installed will not be reaped by the event loop - implementation.</para> - - <para>If both a child process state change event source and a - <constant>SIGCHLD</constant> signal event source is installed in - the same event loop, the configured event source priorities decide - which event source is dispatched first. If the signal handler is - processed first, it should leave the child processes for which - child process state change event sources are installed unreaped.</para> - - <para><function>sd_event_source_get_child_pid()</function> - retrieves the configured PID of a child process state change event - source created previously with - <function>sd_event_add_child()</function>. It takes the event - source object as the <parameter>source</parameter> parameter and a - pointer to a <type>pid_t</type> variable to return the process ID - in. - </para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, these functions return 0 or a positive - integer. On failure, they return a negative errno-style error - code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Not enough memory to allocate an object.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>An invalid argument has been passed. This includes - specifying an empty mask in <parameter>options</parameter> or a mask - which contains values different than a combination of - <constant>WEXITED</constant>, <constant>WSTOPPED</constant>, and - <constant>WCONTINUED</constant>. - </para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-EBUSY</constant></term> - - <listitem><para>A handler is already installed for this - child process.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-ESTALE</constant></term> - - <listitem><para>The event loop is already terminated.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-ECHILD</constant></term> - - <listitem><para>The event loop has been created in a different process.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-EDOM</constant></term> - - <listitem><para>The passed event source is not a child process event source.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_now</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_priority</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_userdata</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_description</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>waitid</refentrytitle><manvolnum>2</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_add_defer.xml b/man/sd_event_add_defer.xml deleted file mode 100644 index d9ebd3b179..0000000000 --- a/man/sd_event_add_defer.xml +++ /dev/null @@ -1,216 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_add_defer" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_add_defer</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>More text</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_add_defer</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_add_defer</refname> - <refname>sd_event_add_post</refname> - <refname>sd_event_add_exit</refname> - <refname>sd_event_handler_t</refname> - - <refpurpose>Add static event sources to an event loop</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcsynopsisinfo><token>typedef</token> struct sd_event_source sd_event_source;</funcsynopsisinfo> - - <funcprototype> - <funcdef>typedef int (*<function>sd_event_handler_t</function>)</funcdef> - <paramdef>sd_event_source *<parameter>s</parameter></paramdef> - <paramdef>void *<parameter>userdata</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_add_defer</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - <paramdef>sd_event_source **<parameter>source</parameter></paramdef> - <paramdef>sd_event_handler_t <parameter>handler</parameter></paramdef> - <paramdef>void *<parameter>userdata</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_add_post</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - <paramdef>sd_event_source **<parameter>source</parameter></paramdef> - <paramdef>sd_event_handler_t <parameter>handler</parameter></paramdef> - <paramdef>void *<parameter>userdata</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_add_exit</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - <paramdef>sd_event_source **<parameter>source</parameter></paramdef> - <paramdef>sd_event_handler_t <parameter>handler</parameter></paramdef> - <paramdef>void *<parameter>userdata</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>These three functions add new static event sources to an - event loop. The event loop object is specified in the - <parameter>event</parameter> parameter, the event source object is - returned in the <parameter>source</parameter> parameter. The event - sources are enabled statically and will "fire" when the event loop - is run and the conditions described below are met. The handler - function will be passed the <parameter>userdata</parameter> - pointer, which may be chosen freely by the caller.</para> - - <para><function>sd_event_add_defer()</function> adds a new event - source that will be dispatched instantly, before the event loop - goes to sleep again and waits for new events. By default, the - handler will be called once - (<constant>SD_EVENT_ONESHOT</constant>). Note that if the event - source is set to <constant>SD_EVENT_ON</constant> the event loop - will never go to sleep again, but continuously call the handler, - possibly interleaved with other event sources.</para> - - <para><function>sd_event_add_post()</function> adds a new event - source that is run before the event loop will sleep and wait - for new events, but only after at least one other non-post event - source was dispatched. By default, the source is enabled - permanently (<constant>SD_EVENT_ON</constant>). Note that this - event source type will still allow the event loop to go to sleep - again, even if set to <constant>SD_EVENT_ON</constant>, as long as - no other event source is ever triggered.</para> - - <para><function>sd_event_add_exit()</function> adds a new event - source that will be dispatched when the event loop is terminated - with <citerefentry><refentrytitle>sd_event_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para>The - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry> - function may be used to enable the event source permanently - (<constant>SD_EVENT_ON</constant>) or to make it fire just once - (<constant>SD_EVENT_ONESHOT</constant>).</para> - - <para>If the handler function returns a negative error code, it - will be disabled after the invocation, even if the - <constant>SD_EVENT_ON</constant> mode was requested before.</para> - - <para>To destroy an event source object use - <citerefentry><refentrytitle>sd_event_source_unref</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - but note that the event source is only removed from the event loop - when all references to the event source are dropped. To make sure - an event source does not fire anymore, even when there's still a - reference to it kept, consider setting the event source to - <constant>SD_EVENT_OFF</constant> with - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para>If the second parameter of these functions is passed as - NULL no reference to the event source object is returned. In this - case the event source is considered "floating", and will be - destroyed implicitly when the event loop itself is - destroyed.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, this functions return 0 or a positive - integer. On failure, they return a negative errno-style error - code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Not enough memory to allocate an object.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>An invalid argument has been passed.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ESTALE</constant></term> - - <listitem><para>The event loop is already terminated.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ECHILD</constant></term> - - <listitem><para>The event loop has been created in a different process.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_now</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_priority</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_userdata</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_description</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_add_io.xml b/man/sd_event_add_io.xml deleted file mode 100644 index c3749164cd..0000000000 --- a/man/sd_event_add_io.xml +++ /dev/null @@ -1,300 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_add_io" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_add_io</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_add_io</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_add_io</refname> - <refname>sd_event_source_get_io_events</refname> - <refname>sd_event_source_set_io_events</refname> - <refname>sd_event_source_get_io_revents</refname> - <refname>sd_event_source_get_io_fd</refname> - <refname>sd_event_source_set_io_fd</refname> - <refname>sd_event_source</refname> - <refname>sd_event_io_handler_t</refname> - - <refpurpose>Add an I/O event source to an event loop</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcsynopsisinfo><token>typedef</token> struct sd_event_source sd_event_source;</funcsynopsisinfo> - - <funcprototype> - <funcdef>typedef int (*<function>sd_event_io_handler_t</function>)</funcdef> - <paramdef>sd_event_source *<parameter>s</parameter></paramdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>uint32_t <parameter>revents</parameter></paramdef> - <paramdef>void *<parameter>userdata</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_add_io</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - <paramdef>sd_event_source **<parameter>source</parameter></paramdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>uint32_t <parameter>events</parameter></paramdef> - <paramdef>sd_event_io_handler_t <parameter>handler</parameter></paramdef> - <paramdef>void *<parameter>userdata</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_source_get_io_events</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>uint32_t *<parameter>events</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_source_set_io_events</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>uint32_t <parameter>events</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_source_get_io_revents</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>uint32_t *<parameter>revents</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_source_get_io_fd</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_source_set_io_fd</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>int <parameter>fd</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_add_io()</function> adds a new I/O event - source to an event loop. The event loop object is specified in the - <parameter>event</parameter> parameter, the event source object is - returned in the <parameter>source</parameter> parameter. The - <parameter>fd</parameter> parameter takes the UNIX file descriptor - to watch, which may refer to a socket, a FIFO, a message queue, a - serial connection, a character device, or any other file descriptor - compatible with Linux - <citerefentry project='man-pages'><refentrytitle>epoll</refentrytitle><manvolnum>7</manvolnum></citerefentry>. The - <parameter>events</parameter> parameter takes a bit mask of events - to watch for, a combination of the following event flags: - <constant>EPOLLIN</constant>, <constant>EPOLLOUT</constant>, - <constant>EPOLLRDHUP</constant>, <constant>EPOLLPRI</constant>, - and <constant>EPOLLET</constant>, see - <citerefentry project='man-pages'><refentrytitle>epoll_ctl</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details. The <parameter>handler</parameter> shall reference a - function to call when the event source is triggered. The - <parameter>userdata</parameter> pointer will be passed to the - handler function, and may be chosen freely by the caller. The - handler will also be passed the file descriptor the event was seen - on, as well as the actual event flags. It's generally a subset of - the events watched, however may additionally include - <constant>EPOLLERR</constant> and <constant>EPOLLHUP</constant>. - </para> - - <para>By default, an event source will stay enabled - continuously (<constant>SD_EVENT_ON</constant>), but this may be - changed with - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - If the handler function returns a negative error code, it will be - disabled after the invocation, even if the - <constant>SD_EVENT_ON</constant> mode was requested before. Note - that an event source set to <constant>SD_EVENT_ON</constant> will - fire continuously unless data is read from or written to the file - descriptor to reset the mask of events seen. - </para> - - <para>Setting the I/O event mask to watch for to 0 does not mean - that the event source won't be triggered anymore, as - <constant>EPOLLHUP</constant> and <constant>EPOLLERR</constant> - may be triggered even with a zero event mask. To temporarily - disable an I/O event source use - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry> - with <constant>SD_EVENT_OFF</constant> instead.</para> - - <para>To destroy an event source object use - <citerefentry><refentrytitle>sd_event_source_unref</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - but note that the event source is only removed from the event loop - when all references to the event source are dropped. To make sure - an event source does not fire anymore, even if it is still referenced, - disable the event source using - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry> - with <constant>SD_EVENT_OFF</constant>.</para> - - <para>If the second parameter of - <function>sd_event_add_io()</function> is - <constant>NULL</constant> no reference to the event source object - is returned. In this case the event source is considered - "floating", and will be destroyed implicitly when the event loop - itself is destroyed.</para> - - <para>It is recommended to use - <function>sd_event_add_io()</function> only in conjunction with - file descriptors that have <constant>O_NONBLOCK</constant> set, to - ensure that all I/O operations from invoked handlers are properly - asynchronous and non-blocking. Using file descriptors without - <constant>O_NONBLOCK</constant> might result in unexpected - starvation of other event sources. See - <citerefentry project='man-pages'><refentrytitle>fcntl</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details on enabling <constant>O_NONBLOCK</constant> mode.</para> - - <para><function>sd_event_source_get_io_events()</function> retrieves - the configured mask of watched I/O events of an event source created - previously with <function>sd_event_add_io()</function>. It takes - the event source object and a pointer to a variable to store the - mask in.</para> - - <para><function>sd_event_source_set_io_events()</function> - configures the mask of watched I/O events of an event source created - previously with <function>sd_event_add_io()</function>. It takes the - event source object and the new event mask.</para> - - <para><function>sd_event_source_get_io_revents()</function> - retrieves the I/O event mask of currently seen but undispatched - events from an event source created previously with - <function>sd_event_add_io()</function>. It takes the event source - object and a pointer to a variable to store the event mask - in. When called from a handler function on the handler's event - source object this will return the same mask as passed to the - handler's <parameter>revents</parameter> parameter. This call is - primarily useful to check for undispatched events of an event - source from the handler of an unrelated (possibly higher priority) - event source. Note the relation between - <function>sd_event_source_get_pending()</function> and - <function>sd_event_source_get_io_revents()</function>: both - functions will report non-zero results when there's an event - pending for the event source, but the former applies to all event - source types, the latter only to I/O event sources.</para> - - <para><function>sd_event_source_get_io_fd()</function> retrieves - the UNIX file descriptor of an event source created previously - with <function>sd_event_add_io()</function>. It takes the event - source object and returns the non-negative file descriptor - or a negative error number on error (see below).</para> - - <para><function>sd_event_source_set_io_fd()</function> - changes the UNIX file descriptor of an I/O event source created - previously with <function>sd_event_add_io()</function>. It takes - the event source object and the new file descriptor.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, these functions return 0 or a positive - integer. On failure, they return a negative errno-style error - code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned values may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Not enough memory to allocate an object.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>An invalid argument has been passed.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-ESTALE</constant></term> - - <listitem><para>The event loop is already terminated.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-ECHILD</constant></term> - - <listitem><para>The event loop has been created in a different process.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EDOM</constant></term> - - <listitem><para>The passed event source is not an I/O event source.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_now</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_priority</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_userdata</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_description</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_get_pending</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>epoll_ctl</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>epoll</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_add_signal.xml b/man/sd_event_add_signal.xml deleted file mode 100644 index e98f1d2682..0000000000 --- a/man/sd_event_add_signal.xml +++ /dev/null @@ -1,221 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_add_signal" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_add_signal</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>More text</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_add_signal</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_add_signal</refname> - <refname>sd_event_source_get_signal</refname> - <refname>sd_event_signal_handler_t</refname> - - <refpurpose>Add a UNIX process signal event source to an event - loop</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcsynopsisinfo><token>typedef</token> struct sd_event_source sd_event_source;</funcsynopsisinfo> - - <funcprototype> - <funcdef>typedef int (*<function>sd_event_signal_handler_t</function>)</funcdef> - <paramdef>sd_event_source *<parameter>s</parameter></paramdef> - <paramdef>const struct signalfd_siginfo *<parameter>si</parameter></paramdef> - <paramdef>void *<parameter>userdata</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_add_signal</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - <paramdef>sd_event_source **<parameter>source</parameter></paramdef> - <paramdef>int <parameter>signal</parameter></paramdef> - <paramdef>sd_event_signal_handler_t <parameter>handler</parameter></paramdef> - <paramdef>void *<parameter>userdata</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_source_get_signal</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_add_signal()</function> adds a new UNIX - process signal event source to an event loop. The event loop - object is specified in the <parameter>event</parameter> parameter, - and the event source object is returned in the - <parameter>source</parameter> parameter. The - <parameter>signal</parameter> parameter specifies the numeric - signal to be handled (see <citerefentry - project='man-pages'><refentrytitle>signal</refentrytitle><manvolnum>7</manvolnum></citerefentry>). - The <parameter>handler</parameter> parameter must reference a - function to call when the signal is received or be - <constant>NULL</constant>. The handler function will be passed - the <parameter>userdata</parameter> pointer, which may be chosen - freely by the caller. The handler also receives a pointer to a - <structname>signalfd_siginfo</structname> structure containing - information about the received signal. See <citerefentry - project='man-pages'><refentrytitle>signalfd</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for further information.</para> - - <para>Only a single handler may be installed for a specific - signal. The signal will be unblocked by this call, and must be - blocked before this function is called in all threads (using - <citerefentry - project='man-pages'><refentrytitle>sigprocmask</refentrytitle><manvolnum>2</manvolnum></citerefentry>). If - the handler is not specified (<parameter>handler</parameter> is - <constant>NULL</constant>), a default handler which causes the - program to exit cleanly will be used.</para> - - <para>By default, the event source is enabled permanently - (<constant>SD_EVENT_ON</constant>), but this may be changed with - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - If the handler function returns a negative error code, it will be - disabled after the invocation, even if the - <constant>SD_EVENT_ON</constant> mode was requested before. - </para> - - <para>To destroy an event source object use - <citerefentry><refentrytitle>sd_event_source_unref</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - but note that the event source is only removed from the event loop - when all references to the event source are dropped. To make sure - an event source does not fire anymore, even if it is still referenced, - disable the event source using - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry> - with <constant>SD_EVENT_OFF</constant>.</para> - - <para>If the second parameter of - <function>sd_event_add_signal()</function> is - <constant>NULL</constant> no reference to the event source object - is returned. In this case the event source is considered - "floating", and will be destroyed implicitly when the event loop - itself is destroyed.</para> - - <para><function>sd_event_source_get_signal()</function> returns - the configured signal number of an event source created previously - with <function>sd_event_add_signal()</function>. It takes the - event source object as the <parameter>source</parameter> - parameter.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, these functions return 0 or a positive - integer. On failure, they return a negative errno-style error - code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Not enough memory to allocate an object.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>An invalid argument has been passed.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EBUSY</constant></term> - - <listitem><para>A handler is already installed for this - signal or the signal was not blocked previously.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ESTALE</constant></term> - - <listitem><para>The event loop is already terminated.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ECHILD</constant></term> - - <listitem><para>The event loop has been created in a different process.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EDOM</constant></term> - - <listitem><para>The passed event source is not a signal event source.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_now</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_description</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_userdata</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>signal</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>signalfd</refentrytitle><manvolnum>2</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_add_time.xml b/man/sd_event_add_time.xml deleted file mode 100644 index a2c0d54b56..0000000000 --- a/man/sd_event_add_time.xml +++ /dev/null @@ -1,313 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_add_time" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_add_time</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_add_time</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_add_time</refname> - <refname>sd_event_source_get_time</refname> - <refname>sd_event_source_set_time</refname> - <refname>sd_event_source_get_time_accuracy</refname> - <refname>sd_event_source_set_time_accuracy</refname> - <refname>sd_event_source_get_time_clock</refname> - <refname>sd_event_time_handler_t</refname> - - <refpurpose>Add a timer event source to an event loop</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcsynopsisinfo><token>typedef</token> struct sd_event_source sd_event_source;</funcsynopsisinfo> - - <funcprototype> - <funcdef>typedef int (*<function>sd_event_time_handler_t</function>)</funcdef> - <paramdef>sd_event_source *<parameter>s</parameter></paramdef> - <paramdef>uint64_t <parameter>usec</parameter></paramdef> - <paramdef>void *<parameter>userdata</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_add_time</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - <paramdef>sd_event_source **<parameter>source</parameter></paramdef> - <paramdef>clockid_t <parameter>clock</parameter></paramdef> - <paramdef>uint64_t <parameter>usec</parameter></paramdef> - <paramdef>uint64_t <parameter>accuracy</parameter></paramdef> - <paramdef>sd_event_time_handler_t <parameter>handler</parameter></paramdef> - <paramdef>void *<parameter>userdata</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_source_get_time</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>uint64_t *<parameter>usec</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_source_set_time</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>uint64_t <parameter>usec</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_source_get_time_accuracy</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>uint64_t *<parameter>usec</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_source_set_time_accuracy</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>uint64_t <parameter>usec</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_source_get_time_clock</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>clockid_t *<parameter>clock</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_add_time()</function> adds a new timer event source to an event loop. The event loop - object is specified in the <parameter>event</parameter> parameter, the event source object is returned in the - <parameter>source</parameter> parameter. The <parameter>clock</parameter> parameter takes a clock identifier, one - of <constant>CLOCK_REALTIME</constant>, <constant>CLOCK_MONOTONIC</constant>, <constant>CLOCK_BOOTTIME</constant>, - <constant>CLOCK_REALTIME_ALARM</constant>, or <constant>CLOCK_BOOTTIME_ALARM</constant>. See - <citerefentry><refentrytitle>timerfd_create</refentrytitle><manvolnum>2</manvolnum></citerefentry> for details - regarding the various types of clocks. The <parameter>usec</parameter> parameter specifies the earliest time, in - microseconds (µs), relative to the clock's epoch, when the timer shall be triggered. If a time already in the past - is specified (including <constant>0</constant>), this timer source "fires" immediately and is ready to be - dispatched. If the paramater is specified as <constant>UINT64_MAX</constant> the timer event will never elapse, - which may be used as an alternative to explicitly disabling a timer event source with - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>. The - <parameter>accuracy</parameter> parameter specifies an additional accuracy value in µs specifying how much the - timer event may be delayed. Use <constant>0</constant> to select the default accuracy (250ms). Use 1µs for maximum - accuracy. Consider specifying 60000000µs (1min) or larger for long-running events that may be delayed - substantially. Picking higher accuracy values allows the system to coalesce timer events more aggressively, - improving power efficiency. The <parameter>handler</parameter> parameter shall reference a function to call when - the timer elapses. The handler function will be passed the <parameter>userdata</parameter> pointer, which may be - chosen freely by the caller. The handler is also passed the configured trigger time, even if it is actually called - slightly later, subject to the specified accuracy value, the kernel timer slack (see - <citerefentry><refentrytitle>prctl</refentrytitle><manvolnum>2</manvolnum></citerefentry>), and additional - scheduling latencies. To query the actual time the handler was called use - <citerefentry><refentrytitle>sd_event_now</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para>By default, the timer will elapse once - (<constant>SD_EVENT_ONESHOT</constant>), but this may be changed - with - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - If the handler function returns a negative error code, it will be - disabled after the invocation, even if the - <constant>SD_EVENT_ON</constant> mode was requested before. Note - that a timer event set to <constant>SD_EVENT_ON</constant> will - fire continuously unless its configured time is updated using - <function>sd_event_source_set_time()</function>. - </para> - - <para>To destroy an event source object use - <citerefentry><refentrytitle>sd_event_source_unref</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - but note that the event source is only removed from the event loop - when all references to the event source are dropped. To make sure - an event source does not fire anymore, even if it is still referenced, - disable the event source using - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry> - with <constant>SD_EVENT_OFF</constant>.</para> - - <para>If the second parameter of - <function>sd_event_add_time()</function> is - <constant>NULL</constant> no reference to the event source object - is returned. In this case the event source is considered - "floating", and will be destroyed implicitly when the event loop - itself is destroyed.</para> - - <para>If the <parameter>handler</parameter> to - <function>sd_event_add_time()</function> is - <constant>NULL</constant>, and the event source fires, this will - be considered a request to exit the event loop. In this case, the - <parameter>userdata</parameter> parameter, cast to an integer, is - used for the exit code passed to - <citerefentry><refentrytitle>sd_event_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para>Use <constant>CLOCK_BOOTTIME_ALARM</constant> and - <constant>CLOCK_REALTIME_ALARM</constant> to define event sources - that may wake up the system from suspend.</para> - - <para>In order to set up relative timers (that is, relative to the - current time), retrieve the current time via - <citerefentry><refentrytitle>sd_event_now</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - add the desired timespan to it, and use the result as - the <parameter>usec</parameter> parameter to - <function>sd_event_add_time()</function>.</para> - - <para>In order to set up repetitive timers (that is, timers that - are triggered in regular intervals), set up the timer normally, - for the first invocation. Each time the event handler is invoked, - update the timer's trigger time with - <citerefentry><refentrytitle>sd_event_source_set_time</refentrytitle><manvolnum>3</manvolnum></citerefentry> for the next timer - iteration, and reenable the timer using - <function>sd_event_source_set_enabled()</function>. To calculate - the next point in time to pass to - <function>sd_event_source_set_time()</function>, either use as - base the <parameter>usec</parameter> parameter passed to the timer - callback, or the timestamp returned by - <function>sd_event_now()</function>. In the former case timer - events will be regular, while in the latter case the scheduling - latency will keep accumulating on the timer.</para> - - <para><function>sd_event_source_get_time()</function> retrieves - the configured time value of an event source created - previously with <function>sd_event_add_time()</function>. It takes - the event source object and a pointer to a variable to store the - time in, relative to the selected clock's epoch, in µs.</para> - - <para><function>sd_event_source_set_time()</function> changes the - time of an event source created previously with - <function>sd_event_add_time()</function>. It takes the event - source object and a time relative to the selected clock's epoch, - in µs.</para> - - <para><function>sd_event_source_get_time_accuracy()</function> - retrieves the configured accuracy value of a event source - created previously with <function>sd_event_add_time()</function>. It - takes the event source object and a pointer to a variable to store - the accuracy in. The accuracy is specified in µs.</para> - - <para><function>sd_event_source_set_time_accuracy()</function> - changes the configured accuracy of a timer event source created - previously with <function>sd_event_add_time()</function>. It takes - the event source object and accuracy, in µs.</para> - - <para><function>sd_event_source_get_time_clock()</function> - retrieves the configured clock of a event source created - previously with <function>sd_event_add_time()</function>. It takes - the event source object and a pointer to a variable to store the - clock identifier in.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, these functions return 0 or a positive - integer. On failure, they return a negative errno-style error - code. </para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned values may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Not enough memory to allocate an object.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>An invalid argument has been passed.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-ESTALE</constant></term> - - <listitem><para>The event loop is already terminated.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-ECHILD</constant></term> - - <listitem><para>The event loop has been created in a different process.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-EOPNOTSUPP</constant></term> - - <listitem><para>The selected clock is not supported by the event loop implementation.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-EDOM</constant></term> - - <listitem><para>The passed event source is not a timer event source.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_now</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_priority</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_userdata</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_description</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>clock_gettime</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>timerfd_create</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>prctl</refentrytitle><manvolnum>2</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_exit.xml b/man/sd_event_exit.xml deleted file mode 100644 index 9846a3eaf4..0000000000 --- a/man/sd_event_exit.xml +++ /dev/null @@ -1,163 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_exit" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_exit</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_exit</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_exit</refname> - <refname>sd_event_get_exit_code</refname> - - <refpurpose>Ask the event loop to exit</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_event_exit</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - <paramdef>int <parameter>code</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_get_exit_code</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - <paramdef>int *<parameter>code</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_exit()</function> requests the event loop - specified in the <parameter>event</parameter> event loop object to - exit. The <parameter>code</parameter> parameter may be any integer - value and is returned as-is by - <citerefentry><refentrytitle>sd_event_loop</refentrytitle><manvolnum>3</manvolnum></citerefentry> - after the last event loop iteration. It may also be queried - using <function>sd_event_get_exit_code()</function>, see - below. </para> - - <para>When exiting is requested the event loop will stop listening - for and dispatching regular event sources. Instead it will proceed - with executing only event sources registered with - <citerefentry><refentrytitle>sd_event_add_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry> - in the order defined by their priority. After all exit event - sources have been dispatched the event loop is terminated.</para> - - <para>If <function>sd_event_exit()</function> is invoked a second - time while the event loop is still processing exit event sources, - the exit code stored in the event loop object is updated, but - otherwise no further operation is executed.</para> - - <para><function>sd_event_get_exit_code()</function> may be used to - query the exit code passed into - <function>sd_event_exit()</function> earlier.</para> - - <para>While the full positive and negative integer ranges may be used - for the exit code, care should be taken not pick exit codes that - conflict with regular exit codes returned by - <function>sd_event_loop()</function>, if these exit codes shall be - distinguishable.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, <function>sd_event_exit()</function> and - <function>sd_event_get_exit_code()</function> return 0 or a positive - integer. On failure, they return a negative errno-style error - code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>The event loop object or error code pointer are invalid.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-ECHILD</constant></term> - - <listitem><para>The event loop was created in a different process.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ESTALE</constant></term> - - <listitem><para>The event loop has exited already and all exit handlers are already processed.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENODATA</constant></term> - - <listitem><para>The event loop has not been requested to exit yet.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_get_fd.xml b/man/sd_event_get_fd.xml deleted file mode 100644 index f68752dd0e..0000000000 --- a/man/sd_event_get_fd.xml +++ /dev/null @@ -1,140 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_get_fd" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_get_fd</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>More text</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_get_fd</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_get_fd</refname> - - <refpurpose>Obtain a file descriptor to poll for event loop events</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_event_get_fd</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_get_fd()</function> returns the file - descriptor that an event loop object returned by the - <citerefentry><refentrytitle>sd_event_new</refentrytitle><manvolnum>3</manvolnum></citerefentry> - function uses to wait for events. This file descriptor may itself - be polled for - <constant>POLLIN</constant>/<constant>EPOLLIN</constant> - events. This makes it possible to embed an - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry> - event loop into another, possibly foreign, event loop.</para> - - <para>The returned file descriptor refers to an <citerefentry - project='man-pages'><refentrytitle>epoll</refentrytitle><manvolnum>7</manvolnum></citerefentry> - object. It is recommended not to alter it by invoking - <citerefentry - project='man-pages'><refentrytitle>epoll_ctl</refentrytitle><manvolnum>2</manvolnum></citerefentry> - on it, in order to avoid interference with the event loop's inner - logic and assumptions.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, <function>sd_event_get_fd()</function> returns a - non-negative file descriptor. On failure, it returns a negative - errno-style error code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para><parameter>event</parameter> is not a valid - pointer to an <structname>sd_event</structname> structure. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ECHILD</constant></term> - - <listitem><para>The event loop has been created in a different process.</para></listitem> - - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Examples</title> - - <example> - <title>Integration in the GLib event loop</title> - - <programlisting><xi:include href="glib-event-glue.c" parse="text" /></programlisting> - </example> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_wait</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>epoll_ctl</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>epoll</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_new.xml b/man/sd_event_new.xml deleted file mode 100644 index 2c23b00a8c..0000000000 --- a/man/sd_event_new.xml +++ /dev/null @@ -1,245 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_new" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_new</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_new</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_new</refname> - <refname>sd_event_default</refname> - <refname>sd_event_ref</refname> - <refname>sd_event_unref</refname> - <refname>sd_event_unrefp</refname> - <refname>sd_event_get_tid</refname> - <refname>sd_event</refname> - - <refpurpose>Acquire and release an event loop object</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcsynopsisinfo><token>typedef</token> struct sd_event sd_event;</funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_event_new</function></funcdef> - <paramdef>sd_event **<parameter>event</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_default</function></funcdef> - <paramdef>sd_event **<parameter>event</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>sd_event *<function>sd_event_ref</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>sd_event *<function>sd_event_unref</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>void <function>sd_event_unrefp</function></funcdef> - <paramdef>sd_event **<parameter>event</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_get_tid</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - <paramdef>pid_t *<parameter>tid</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_new()</function> allocates a new event - loop object. The event loop object is returned in the - <parameter>event</parameter> parameter. After use, drop - the returned reference with - <function>sd_event_unref()</function>. When the last reference is - dropped, the object is freed.</para> - - <para><function>sd_event_default()</function> acquires a reference - to the default event loop object of the calling thread, possibly - allocating a new object if no default event loop object has been - allocated yet for the thread. After use, drop the returned - reference with <function>sd_event_unref()</function>. When the - last reference is dropped, the event loop is freed. If this - function is called while the object returned from a previous call - from the same thread is still referenced, the same object is - returned again, but the reference is increased by one. It is - recommended to use this call instead of - <function>sd_event_new()</function> in order to share event loop - objects between various components that are dispatched in the same - thread. All threads have exactly either zero or one default event loop - objects associated, but never more.</para> - - <para>After allocating an event loop object, add event sources to - it with - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry> - or - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - and then execute the event loop using - <citerefentry><refentrytitle>sd_event_run</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para><function>sd_event_ref()</function> increases the reference - count of the specified event loop object by one.</para> - - <para><function>sd_event_unref()</function> decreases the - reference count of the specified event loop object by one. If - the count hits zero, the object is freed. Note that it - is freed regardless of whether it is the default event loop object for a - thread or not. This means that allocating an event loop with - <function>sd_event_default()</function>, then releasing it, and - then acquiring a new one with - <function>sd_event_default()</function> will result in two - distinct objects. Note that, in order to free an event loop object, - all remaining event sources of the event loop also need to be - freed as each keeps a reference to it.</para> - - <para><function>sd_event_unrefp()</function> is similar to - <function>sd_event_unref()</function> but takes a pointer to a - pointer to an <type>sd_event</type> object. This call is useful in - conjunction with GCC's and LLVM's <ulink - url="https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html">Clean-up - Variable Attribute</ulink>. Note that this function is defined as - inline function. Use a declaration like the following, - in order to allocate an event loop object that is freed - automatically as the code block is left:</para> - - <programlisting>{ - __attribute__((cleanup(sd_event_unrefp)) sd_event *event = NULL; - int r; - … - r = sd_event_default(&event); - if (r < 0) - fprintf(stderr, "Failed to allocate event loop: %s\n", strerror(-r)); - … -}</programlisting> - - <para><function>sd_event_ref()</function>, - <function>sd_event_unref()</function> and - <function>sd_event_unrefp()</function> execute no operation if the - passed in event loop object is <constant>NULL</constant>.</para> - - <para><function>sd_event_get_tid()</function> retrieves the thread - identifier ("TID") of the thread the specified event loop object - is associated with. This call is only supported for event loops - allocated with <function>sd_event_default()</function>, and - returns the identifier for the thread the event loop is the - default event loop of. See <citerefentry - project='man-pages'><refentrytitle>gettid</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for more information on thread identifiers.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, <function>sd_event_new()</function> and - <function>sd_event_default()</function> return 0 or a positive - integer. On failure, they return a negative errno-style error - code. <function>sd_event_ref()</function> always returns a pointer - to the event loop object passed - in. <function>sd_event_unref()</function> always returns - <constant>NULL</constant>.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Not enough memory to allocate the object.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EMFILE</constant></term> - - <listitem><para>The maximum number of event loops has been allocated.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-ENXIO</constant></term> - - <listitem><para><function>sd_event_get_tid()</function> was - invoked on an event loop object that was not allocated with - <function>sd_event_default()</function>.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_post</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_run</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>gettid</refentrytitle><manvolnum>2</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_now.xml b/man/sd_event_now.xml deleted file mode 100644 index 2c83b0bcb5..0000000000 --- a/man/sd_event_now.xml +++ /dev/null @@ -1,146 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_now" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_now</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_now</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_now</refname> - - <refpurpose>Retrieve current event loop iteration timestamp</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_event_now</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - <paramdef>clockid_t <parameter>clock</parameter></paramdef> - <paramdef>uint64_t *<parameter>usec</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_now()</function> returns the time when - the most recent event loop iteration began. A timestamp - is taken right after returning from the event sleep, and before - dispatching any event sources. The <parameter>event</parameter> - parameter specifies the event loop object to retrieve the timestamp - from. The <parameter>clock</parameter> parameter specifies the clock to - retrieve the timestamp for, and is one of - <constant>CLOCK_REALTIME</constant> (or equivalently - <constant>CLOCK_REALTIME_ALARM</constant>), - <constant>CLOCK_MONOTONIC</constant>, or - <constant>CLOCK_BOOTTIME</constant> (or equivalently - <constant>CLOCK_BOOTTIME_ALARM</constant>), see - <citerefentry project='man-pages'><refentrytitle>clock_gettime</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for more information on the various clocks. The retrieved - timestamp is stored in the <parameter>usec</parameter> parameter, - in µs since the clock's epoch. If this function is invoked before - the first event loop iteration, the current time is returned, as - reported by <function>clock_gettime()</function>. To distinguish - this case from a regular invocation the return value will be - positive, and zero when the returned timestamp refers to an actual - event loop iteration.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>If the first event loop iteration has not run yet - <function>sd_event_now()</function> writes current time to - <parameter>usec</parameter> and returns a positive return value. - Otherwise, it will write the requested timestamp to <parameter>usec</parameter> - and return 0. On failure, the call returns a negative errno-style - error code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned values may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>An invalid parameter was - passed.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-EOPNOTSUPP</constant></term> - - <listitem><para>Unsupported clock type. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ECHILD</constant></term> - - <listitem><para>The event loop object was created in a - different process.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>clock_gettime</refentrytitle><manvolnum>2</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_run.xml b/man/sd_event_run.xml deleted file mode 100644 index 5b68959165..0000000000 --- a/man/sd_event_run.xml +++ /dev/null @@ -1,190 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_run" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_run</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Tom</firstname> - <surname>Gundersen</surname> - <email>teg@jklm.no</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_run</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_run</refname> - <refname>sd_event_loop</refname> - - <refpurpose>Run an event loop</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_event_run</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - <paramdef>uint64_t <parameter>usec</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_loop</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_run()</function> may be used to run a single - iteration of the event loop specified in the - <parameter>event</parameter> parameter. The function waits until an event to - process is available, and dispatches the registered handler for - it. The <parameter>usec</parameter> parameter specifies the - maximum time (in microseconds) to wait for an event. Use - <constant>(uint64_t) -1</constant> to specify an infinite - timeout.</para> - - <para><function>sd_event_loop()</function> invokes - <function>sd_event_run()</function> in a loop, thus implementing - the actual event loop. The call returns as soon as exiting was - requested using - <citerefentry><refentrytitle>sd_event_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para>The event loop object <parameter>event</parameter> is - created with - <citerefentry><refentrytitle>sd_event_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - Events sources to wait for and their handlers may be registered - with - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_post</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>sd_event_add_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - </para> - - <para>For low-level control of event loop execution, use - <citerefentry><refentrytitle>sd_event_prepare</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_wait</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>sd_event_dispatch</refentrytitle><manvolnum>3</manvolnum></citerefentry> - which are wrapped by <function>sd_event_run()</function>. Along - with - <citerefentry><refentrytitle>sd_event_get_fd</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - these functions allow integration of an - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry> - event loop into foreign event loop implementations.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On failure, these functions return a negative errno-style - error code. <function>sd_event_run()</function> returns a - positive, non-zero integer if an event source was dispatched, and - zero when the specified timeout hit before an event source has - seen any event, and hence no event source was - dispatched. <function>sd_event_loop()</function> returns the exit - code specified when invoking - <function>sd_event_exit()</function>.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>The <parameter>event</parameter> parameter is - invalid or <constant>NULL</constant>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EBUSY</constant></term> - - <listitem><para>The event loop object is not in the right - state (see - <citerefentry><refentrytitle>sd_event_prepare</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for an explanation of possible states).</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ESTALE</constant></term> - - <listitem><para>The event loop is already terminated.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-ECHILD</constant></term> - - <listitem><para>The event loop has been created in a different process.</para></listitem> - - </varlistentry> - - </variablelist> - - <para>Other errors are possible, too.</para> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_post</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_get_fd</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_wait</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <ulink url="https://developer.gnome.org/glib/unstable/glib-The-Main-Event-Loop.html">GLib Main Event Loop</ulink>. - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_set_watchdog.xml b/man/sd_event_set_watchdog.xml deleted file mode 100644 index cbc5bc0836..0000000000 --- a/man/sd_event_set_watchdog.xml +++ /dev/null @@ -1,177 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_set_watchdog" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_set_watchdog</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_set_watchdog</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_set_watchdog</refname> - <refname>sd_event_get_watchdog</refname> - - <refpurpose>Enable event loop watchdog support</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_event_set_watchdog</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - <paramdef>int b</paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_get_watchdog</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_set_watchdog()</function> may be used to - enable or disable automatic watchdog notification support in the - event loop object specified in the <parameter>event</parameter> - parameter. Specifically, depending on the <parameter>b</parameter> - boolean argument this will make sure the event loop wakes up in - regular intervals and sends watchdog notification messages to the - service manager, if this was requested by the service - manager. Watchdog support is determined with - <citerefentry><refentrytitle>sd_watchdog_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - and watchdog messages are sent with - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>. See - the <varname>WatchdogSec=</varname> setting in - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details on how to enable watchdog support for a service and - the protocol used. The wake-up interval is chosen as half the - watchdog timeout declared by the service manager via the - <varname>$WATCHDOG_USEC</varname> environment variable. If the - service manager did not request watchdog notifications, or if the - process was not invoked by the service manager this call with a - true <parameter>b</parameter> parameter executes no - operation. Passing a false <parameter>b</parameter> parameter will - disable the automatic sending of watchdog notification messages if - it was enabled before. Newly allocated event loop objects have - this feature disabled.</para> - - <para>The first watchdog notification message is sent immediately - when <function>set_event_set_watchdog()</function> is invoked with - a true <parameter>b</parameter> parameter.</para> - - <para>The watchdog logic is designed to allow the service manager - to automatically detect services that ceased processing of - incoming events, and thus appear "hung". Watchdog notifications - are sent out only at the beginning of each event loop - iteration. If an event source dispatch function blocks for an - excessively long time and does not return execution to the event - loop quickly, this might hence cause the notification message to - be delayed, and possibly result in abnormal program termination, - as configured in the service unit file.</para> - - <para><function>sd_event_get_watchdog()</function> may be used to - determine whether watchdog support was previously requested by a - call to <function>sd_event_set_watchdog()</function> with a true - <parameter>b</parameter> parameter and successfully - enabled.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, <function>sd_event_set_watchdog()</function> and - <function>sd_event_get_watchdog()</function> return a non-zero - positive integer if the service manager requested watchdog support - and watchdog support was successfully enabled. They return zero if - the service manager did not request watchdog support, or if - watchdog support was explicitly disabled with a false - <parameter>b</parameter> parameter. On failure, they return a - negative errno-style error - code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - - <varlistentry> - <term><constant>-ECHILD</constant></term> - - <listitem><para>The event loop has been created in a different process.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>The passed event loop object was invalid.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_post</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_watchdog_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_source_get_event.xml b/man/sd_event_source_get_event.xml deleted file mode 100644 index 2fdbd411bd..0000000000 --- a/man/sd_event_source_get_event.xml +++ /dev/null @@ -1,100 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_source_get_event" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_source_get_event</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_source_get_event</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_source_get_event</refname> - - <refpurpose>Retrieve the event loop of an event source</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>sd_event* <function>sd_event_source_get_event</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_source_get_event()</function> may be used - to retrieve the event loop object the event source object specified - as <parameter>source</parameter> is associated with. The event - loop object is specified when creating an event source object with - calls such as - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry> - or - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, <function>sd_event_source_get_event()</function> - returns the associated event loop object. On failure, it returns - NULL.</para> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_userdata</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_source_get_pending.xml b/man/sd_event_source_get_pending.xml deleted file mode 100644 index 7f88bd1b87..0000000000 --- a/man/sd_event_source_get_pending.xml +++ /dev/null @@ -1,167 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_source_get_pending" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_source_get_pending</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_source_get_pending</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_source_get_pending</refname> - - <refpurpose>Determine pending state of event sources</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_event_source_get_pending</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_source_get_pending()</function> may be - used to determine whether the event source object specified as - <parameter>source</parameter> has seen events but has not been - dispatched yet (and thus is marked "pending").</para> - - <para>Event source objects initially are not marked pending, when - they are created with calls such as - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - with the exception of those created with - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry> - which are immediately marked pending, and - <citerefentry><refentrytitle>sd_event_add_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for which the "pending" concept is not defined. For details see - the respective manual pages.</para> - - <para>In each event loop iteration one event source of those - marked pending is dispatched, in the order defined by the event - source priority, as set with - <citerefentry><refentrytitle>sd_event_source_set_priority</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para>For I/O event sources, as created with - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - the call - <citerefentry><refentrytitle>sd_event_source_get_io_revents</refentrytitle><manvolnum>3</manvolnum></citerefentry> - may be used to query the type of event pending in more - detail.</para> - - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, - <function>sd_event_source_get_pending()</function> returns an - integer greater than zero when the event source is marked pending, - and zero when the event source is not marked pending. On failure, - it returns a negative errno-style error code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para><parameter>source</parameter> is not a valid - pointer to an <structname>sd_event_source</structname> - object.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EDOM</constant></term> - - <listitem><para><parameter>source</parameter> refers to an - event source object created with - <citerefentry><refentrytitle>sd_event_add_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Not enough memory.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ESTALE</constant></term> - - <listitem><para>The event loop is already terminated.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-ECHILD</constant></term> - - <listitem><para>The event loop has been created in a different process.</para></listitem> - - </varlistentry> - - </variablelist> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_unref</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_source_set_description.xml b/man/sd_event_source_set_description.xml deleted file mode 100644 index b9488a622f..0000000000 --- a/man/sd_event_source_set_description.xml +++ /dev/null @@ -1,170 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_source_set_description" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_source_set_description</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>More text</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_source_set_description</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_source_set_description</refname> - <refname>sd_event_source_get_description</refname> - - <refpurpose>Set or retrieve descriptive names of event sources</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_event_source_set_description</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>const char *<parameter>description</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_source_get_description</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>const char **<parameter>description</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_source_set_description()</function> may - be used to set an arbitrary descriptive name for the event source - object specified as <parameter>source</parameter>. This name will - be used in debugging messages generated by - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for this event source, and may be queried using - <function>sd_event_source_get_description()</function> for - debugging purposes. The <parameter>description</parameter> parameter shall - point to a <constant>NUL</constant>-terminated string or be - <constant>NULL</constant>. In the latter case, the descriptive - name will be unset. The string is copied internally, hence the - <parameter>description</parameter> argument is not referenced - after the function returns.</para> - - <para><function>sd_event_source_get_description()</function> may - be used to query the current descriptive name assigned to the - event source object <parameter>source</parameter>. It returns a - pointer to the current name in <parameter>description</parameter>, - stored in memory internal to the event source. The memory is - invalidated when the event source is destroyed or the descriptive - name is changed.</para> - - <para>Event source objects generally have no description set when - they are created, except for UNIX signal event sources created - with - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - whose descriptive name is initialized to the signal's C constant - name (e.g. <literal>SIGINT</literal> or - <literal>SIGTERM</literal>).</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, <function>sd_event_source_set_description()</function> and - <function>sd_event_source_get_description()</function> return a - non-negative integer. On failure, they return a negative - errno-style error code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para><parameter>source</parameter> is not a valid - pointer to an <structname>sd_event_source</structname> - object or the <parameter>description</parameter> argument for - <function>sd_event_source_get_description()</function> is - <constant>NULL</constant>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Not enough memory to copy the - name.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ECHILD</constant></term> - - <listitem><para>The event loop has been created in a different process.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-ENXIO</constant></term> - - <listitem><para>No name was set for the event - source.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_userdata</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_source_set_enabled.xml b/man/sd_event_source_set_enabled.xml deleted file mode 100644 index 6844f29a49..0000000000 --- a/man/sd_event_source_set_enabled.xml +++ /dev/null @@ -1,179 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_source_set_enabled" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_source_set_enabled</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_source_set_enabled</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_source_set_enabled</refname> - <refname>sd_event_source_get_enabled</refname> - <refname>SD_EVENT_ON</refname> - <refname>SD_EVENT_OFF</refname> - <refname>SD_EVENT_ONESHOT</refname> - - <refpurpose>Enable or disable event sources</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcsynopsisinfo><token>enum</token> { - <constant>SD_EVENT_OFF</constant> = 0, - <constant>SD_EVENT_ON</constant> = 1, - <constant>SD_EVENT_ONESHOT</constant> = -1, -};</funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_event_source_set_enabled</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>int <parameter>enabled</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_source_get_enabled</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>int *<parameter>enabled</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_source_set_enabled()</function> may be - used to enable or disable the event source object specified as - <parameter>source</parameter>. The <parameter>enabled</parameter> - parameter takes one of <constant>SD_EVENT_ON</constant> (to - enable), <constant>SD_EVENT_OFF</constant> (to disable) or - <constant>SD_EVENT_ONESHOT</constant>. If invoked with - <constant>SD_EVENT_ONESHOT</constant> the event source will be - enabled but automatically reset to - <constant>SD_EVENT_OFF</constant> after the event source was - dispatched once.</para> - - <para>Event sources that are disabled will not result in event - loop wakeups and will not be dispatched, until they are enabled - again.</para> - - <para><function>sd_event_source_get_enabled()</function> may be - used to query whether the event source object - <parameter>source</parameter> is currently enabled or not. It - returns the enablement state in - <parameter>enabled</parameter>.</para> - - <para>Event source objects are enabled when they are first created - with calls such as - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>. However, - depending on the event source type they are enabled continuously - (<constant>SD_EVENT_ON</constant>) or only for a single invocation - of the event source handler - (<constant>SD_EVENT_ONESHOT</constant>). For details see the - respective manual pages.</para> - - <para>As event source objects stay active and may be dispatched as - long as there is at least one reference to them, in many cases it - is a good idea to combine a call to - <citerefentry><refentrytitle>sd_event_source_unref</refentrytitle><manvolnum>3</manvolnum></citerefentry> - with a prior call to - <function>sd_event_source_set_enabled()</function> with - <constant>SD_EVENT_OFF</constant>, to ensure the event source is - not dispatched again until all other remaining references are dropped.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, <function>sd_event_source_set_enabled()</function> and - <function>sd_event_source_get_enabled()</function> return a - non-negative integer. On failure, they return a negative - errno-style error code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para><parameter>source</parameter> is not a valid - pointer to an <structname>sd_event_source</structname> - object.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Not enough memory.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ECHILD</constant></term> - - <listitem><para>The event loop has been created in a different process.</para></listitem> - - </varlistentry> - - </variablelist> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_unref</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_source_set_prepare.xml b/man/sd_event_source_set_prepare.xml deleted file mode 100644 index 24861d01d9..0000000000 --- a/man/sd_event_source_set_prepare.xml +++ /dev/null @@ -1,171 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_source_set_prepare" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_source_set_prepare</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_source_set_prepare</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_source_set_prepare</refname> - - <refpurpose>Set a preparation callback for event sources</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_event_source_set_prepare</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>sd_event_handler_t <parameter>callback</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>typedef int (*<function>sd_event_handler_t</function>)</funcdef> - <paramdef>sd_event_source *<parameter>s</parameter></paramdef> - <paramdef>void *<parameter>userdata</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_source_set_prepare()</function> may be - used to set a preparation callback for the event source object - specified as <parameter>source</parameter>. The callback function - specified as <parameter>callback</parameter> will be invoked - immediately before the event loop goes to sleep to wait for - incoming events. It is invoked with the user data pointer passed - when the event source was created. The callback function may be - used to reconfigure the precise events to wait for. If the - <parameter>callback</parameter> parameter is passed as NULL the - callback function is reset. </para> - - <para>Event source objects have no preparation callback associated - when they are first created with calls such as - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>. Preparation - callback functions are supported for all event source types with - the exception of those created with - <citerefentry><refentrytitle>sd_event_add_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry>. Preparation - callback functions are dispatched in the order indicated by the - event source's priority field, as set with - <citerefentry><refentrytitle>sd_event_source_set_priority</refentrytitle><manvolnum>3</manvolnum></citerefentry>. Preparation - callbacks of disabled event sources (see - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>) - are not invoked.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, - <function>sd_event_source_set_prepare()</function> returns a - non-negative integer. On failure, it returns a negative - errno-style error code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para><parameter>source</parameter> is not a valid - pointer to an <structname>sd_event_source</structname> - object.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ESTALE</constant></term> - - <listitem><para>The event loop is already terminated.</para></listitem> - - </varlistentry> - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Not enough memory.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ECHILD</constant></term> - - <listitem><para>The event loop has been created in a different process.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-EDOM</constant></term> - - <listitem><para>The specified event source has been created - with - <citerefentry><refentrytitle>sd_event_add_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para></listitem> - - </varlistentry> - - </variablelist> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_priority</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_userdata</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_source_set_priority.xml b/man/sd_event_source_set_priority.xml deleted file mode 100644 index 8c9b39fe5e..0000000000 --- a/man/sd_event_source_set_priority.xml +++ /dev/null @@ -1,189 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_source_set_priority" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_source_set_priority</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_source_set_priority</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_source_set_priority</refname> - <refname>sd_event_source_get_priority</refname> - <refname>SD_EVENT_PRIORITY_IMPORTANT</refname> - <refname>SD_EVENT_PRIORITY_NORMAL</refname> - <refname>SD_EVENT_PRIORITY_IDLE</refname> - - <refpurpose>Set or retrieve the priority of event sources</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcsynopsisinfo><token>enum</token> { - <constant>SD_EVENT_SOURCE_IMPORTANT</constant> = -100, - <constant>SD_EVENT_SOURCE_NORMAL</constant> = 0, - <constant>SD_EVENT_SOURCE_IDLE</constant> = 100, -};</funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_event_source_set_priority</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>int64_t <parameter>priority</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_source_get_priority</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>int64_t *<parameter>priority</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_source_set_priority()</function> may be - used to set the priority for the event source object specified as - <parameter>source</parameter>. The priority is specified as an - arbitrary signed 64bit integer. The priority is initialized to - <constant>SD_EVENT_PRIORITY_NORMAL</constant> (0) when the event - source is allocated with a call such as - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry> - or - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - and may be changed with this call. If multiple event sources have seen events at the same time, they are dispatched in the order indicated by the - event sources' priorities. Event sources with smaller priority - values are dispatched first. As well-known points of reference, - the constants <constant>SD_EVENT_PRIORITY_IMPORTANT</constant> - (-100), <constant>SD_EVENT_PRIORITY_NORMAL</constant> (0) and - <constant>SD_EVENT_PRIORITY_IDLE</constant> (100) may be used to - indicate event sources that shall be dispatched early, normally or - late. It is recommended to specify priorities based on these - definitions, and relative to them — however, the full 64bit - signed integer range is available for ordering event - sources.</para> - - <para>Priorities define the order in which event sources that have - seen events are dispatched. Care should be taken to ensure that - high-priority event sources (those with negative priority values - assigned) do not cause starvation of low-priority event sources - (those with positive priority values assigned).</para> - - <para>The order in which event sources with the same priority are - dispatched is undefined, but the event loop generally tries to - dispatch them in the order it learnt about events on them. As the - backing kernel primitives do not provide accurate information - about the order in which events occurred this is not necessarily - reliable. However, it is guaranteed that if events are seen on - multiple same-priority event sources at the same time, each one is - not dispatched again until all others have been dispatched - once. This behaviour guarantees that within each priority - particular event sources do not starve or dominate the event - loop.</para> - - <para><function>sd_event_source_get_priority()</function> may be - used to query the current priority assigned to the event source - object <parameter>source</parameter>.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, - <function>sd_event_source_set_priority()</function> and - <function>sd_event_source_get_priority()</function> return a - non-negative integer. On failure, they return a negative - errno-style error code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para><parameter>source</parameter> is not a valid - pointer to an <structname>sd_event_source</structname> - object.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Not enough memory.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ESTALE</constant></term> - - <listitem><para>The event loop is already terminated.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-ECHILD</constant></term> - - <listitem><para>The event loop has been created in a different process.</para></listitem> - - </varlistentry> - - </variablelist> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_source_set_userdata.xml b/man/sd_event_source_set_userdata.xml deleted file mode 100644 index 533d491b13..0000000000 --- a/man/sd_event_source_set_userdata.xml +++ /dev/null @@ -1,119 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_source_set_userdata" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_source_set_userdata</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_source_set_userdata</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_source_set_userdata</refname> - <refname>sd_event_source_get_userdata</refname> - - <refpurpose>Set or retrieve user data pointer of event sources</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>void* <function>sd_event_source_set_userdata</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - <paramdef>void *<parameter>userdata</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>void* <function>sd_event_source_get_userdata</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_source_set_userdata()</function> may be - used to set an arbitrary user data pointer for the event source - object specified as <parameter>source</parameter>. The user data - pointer is usually specified when creating an event source object - with calls such as - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry> - or - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - and may be updated with this call. The user data pointer is also - passed to all handler callback functions associated with the event - source. The <parameter>userdata</parameter> parameter specifies - the new user data pointer to set, the function returns the - previous user data pointer. Note that <constant>NULL</constant> is - a valid user data pointer.</para> - - <para><function>sd_event_source_get_userdata()</function> may be - used to query the current user data pointer assigned to the event - source object <parameter>source</parameter>.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, - <function>sd_event_source_set_userdata()</function> and - <function>sd_event_source_get_userdata()</function> return the - previously set user data pointer. On failure, they return - NULL.</para> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_description</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_source_unref.xml b/man/sd_event_source_unref.xml deleted file mode 100644 index 2c4d450763..0000000000 --- a/man/sd_event_source_unref.xml +++ /dev/null @@ -1,142 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_source_unref" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_source_unref</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_source_unref</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_source_unref</refname> - <refname>sd_event_source_unrefp</refname> - <refname>sd_event_source_ref</refname> - - <refpurpose>Increase or decrease event source reference counters</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>sd_event_source* <function>sd_event_source_unref</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>void <function>sd_event_source_unrefp</function></funcdef> - <paramdef>sd_event_source **<parameter>source</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>sd_event_source* <function>sd_event_source_ref</function></funcdef> - <paramdef>sd_event_source *<parameter>source</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_event_source_unref()</function> may be used to - decrement by one the reference counter of the event source object - specified as <parameter>source</parameter>. The reference counter - is initially set to one, when the event source is created with calls - such as - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry> - or - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>. When - the reference counter reaches zero it is removed from its event loop - object and destroyed.</para> - - <para><function>sd_event_source_unrefp()</function> is similar to - <function>sd_event_source_unref()</function> but takes a pointer to a - pointer to an <type>sd_event_source</type> object. This call is useful in - conjunction with GCC's and LLVM's <ulink - url="https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html">Clean-up - Variable Attribute</ulink>. Note that this function is defined as - inline function.</para> - - <para><function>sd_event_source_ref()</function> may be used - to increase by one the reference counter of the event source object - specified as <parameter>source</parameter>.</para> - - <para><function>sd_event_source_unref()</function>, - <function>sd_bus_creds_unrefp()</function> and - <function>sd_bus_creds_ref()</function> execute no operation if - the passed event source object is - <constant>NULL</constant>.</para> - - <para>Note that event source objects stay alive and may be - dispatched as long as they have a reference counter greater than - zero. In order to drop a reference of an event source and make - sure the associated event source handler function is not called - anymore it is recommended to combine a call of - <function>sd_event_source_unref()</function> with a prior call to - <function>sd_event_source_set_enabled()</function> with - <constant>SD_EVENT_OFF</constant>.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para><function>sd_event_source_unref()</function> always returns - <constant>NULL</constant>. - <function>sd_event_source_ref()</function> always returns the - event source object passed in.</para> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_child</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_event_wait.xml b/man/sd_event_wait.xml deleted file mode 100644 index f2aea00e98..0000000000 --- a/man/sd_event_wait.xml +++ /dev/null @@ -1,346 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2015 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_event_wait" xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_event_wait</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Tom</firstname> - <surname>Gundersen</surname> - <email>teg@jklm.no</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_event_wait</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_event_wait</refname> - <refname>sd_event_prepare</refname> - <refname>sd_event_dispatch</refname> - <refname>sd_event_get_state</refname> - <refname>SD_EVENT_INITIAL</refname> - <refname>SD_EVENT_PREPARING</refname> - <refname>SD_EVENT_ARMED</refname> - <refname>SD_EVENT_PENDING</refname> - <refname>SD_EVENT_RUNNING</refname> - <refname>SD_EVENT_EXITING</refname> - <refname>SD_EVENT_FINISHED</refname> - - <refpurpose>Low-level event loop operations</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-event.h></funcsynopsisinfo> - - <funcsynopsisinfo><token>enum</token> { - <constant>SD_EVENT_INITIAL</constant>, - <constant>SD_EVENT_PREPARING</constant>, - <constant>SD_EVENT_ARMED</constant>, - <constant>SD_EVENT_PENDING</constant>, - <constant>SD_EVENT_RUNNING</constant>, - <constant>SD_EVENT_EXITING</constant>, - <constant>SD_EVENT_FINISHED</constant>, -};</funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_event_prepare</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_wait</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - <paramdef>uint64_t <parameter>usec</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_dispatch</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_event_get_state</function></funcdef> - <paramdef>sd_event *<parameter>event</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>The low-level <function>sd_event_prepare()</function>, - <function>sd_event_wait()</function> and - <function>sd_event_dispatch()</function> functions may be used to - execute specific phases of an event loop. See - <citerefentry><refentrytitle>sd_event_run</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>sd_event_loop</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for higher-level functions that execute individual but complete - iterations of an event loop or run it continuously.</para> - - <para><function>sd_event_prepare()</function> checks for pending - events and arms necessary timers. If any events are ready to be - processed ("pending"), it returns a positive, non-zero value, and the caller - should process these events with - <function>sd_event_dispatch()</function>.</para> - - <para><function>sd_event_dispatch()</function> dispatches the - highest priority event source that has a pending event. On - success, <function>sd_event_dispatch()</function> returns either - zero, which indicates that no further event sources may be - dispatched and exiting of the event loop was requested via - <citerefentry><refentrytitle>sd_event_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry>; - or a positive non-zero value, which means that an event source was - dispatched and the loop returned to its initial state, and the - caller should initiate the next event loop iteration by invoking - <function>sd_event_prepare()</function> again.</para> - - <para>In case <function>sd_event_prepare()</function> returned - zero, <function>sd_event_wait()</function> should be called to - wait for further events or a timeout. If any events are ready to - be processed, it returns a positive, non-zero value, and the - events should be dispatched with - <function>sd_event_dispatch()</function>. Otherwise, the event - loop returned to its initial state and the next event loop - iteration should be initiated by invoking - <function>sd_event_prepare()</function> again.</para> - - <para><function>sd_event_get_state()</function> may be used to - determine the state the event loop is currently in. It returns one - of the states described below.</para> - - <para>All four functions take, as the first argument, the event - loop object <parameter>event</parameter> that has been created - with <function>sd_event_new()</function>. The timeout for - <function>sd_event_wait()</function> is specified in - <parameter>usec</parameter> in milliseconds. <constant>(uint64_t) - -1</constant> may be used to specify an infinite timeout.</para> -</refsect1> - - <refsect1> - <title>State Machine</title> - - <para>The event loop knows the following states, that may be - queried with <function>sd_event_get_state()</function>.</para> - - <variablelist> - <varlistentry> - <term><constant>SD_EVENT_INITIAL</constant></term> - - <listitem><para>The initial state the event loop is in, - before each event loop iteration. Use - <function>sd_event_prepare()</function> to transition the - event loop into the <constant>SD_EVENT_ARMED</constant> or - <constant>SD_EVENT_PENDING</constant> states.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SD_EVENT_PREPARING</constant></term> - - <listitem><para>An event source is currently being prepared, - i.e. the preparation handler is currently being executed, as - set with - <citerefentry><refentrytitle>sd_event_set_prepare</refentrytitle><manvolnum>3</manvolnum></citerefentry>. This - state is only seen in the event source preparation handler - that is invoked from the - <function>sd_event_prepare()</function> call and is - immediately followed by <constant>SD_EVENT_ARMED</constant> or - <constant>SD_EVENT_PENDING</constant>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SD_EVENT_ARMED</constant></term> - - <listitem><para><function>sd_event_prepare()</function> has - been called and no event sources were ready to be - dispatched. Use <function>sd_event_wait()</function> to wait - for new events, and transition into - <constant>SD_EVENT_PENDING</constant> or back into - <constant>SD_EVENT_INITIAL</constant>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SD_EVENT_PENDING</constant></term> - - <listitem><para><function>sd_event_prepare()</function> or - <function>sd_event_wait()</function> have been called and - there were event sources with events pending. Use - <function>sd_event_dispatch()</function> to dispatch the - highest priority event source and transition back to - <constant>SD_EVENT_INITIAL</constant>, or - <constant>SD_EVENT_FINISHED</constant>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SD_EVENT_RUNNING</constant></term> - - <listitem><para>A regular event source is currently being - dispatched. This state is only seen in the event source - handler that is invoked from the - <function>sd_event_dispatch()</function> call, and is - immediately followed by <constant>SD_EVENT_INITIAL</constant> - or <constant>SD_EVENT_FINISHED</constant> as soon the event - source handler returns. Note that during dispatching of exit - event sources the <constant>SD_EVENT_EXITING</constant> state - is seen instead.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SD_EVENT_EXITING</constant></term> - - <listitem><para>Similar to - <constant>SD_EVENT_RUNNING</constant> but is the state in - effect while dispatching exit event sources. It is followed by - <constant>SD_EVENT_INITIAL</constant> or - <constant>SD_EVENT_FINISHED</constant> as soon as the event - handler returns.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SD_EVENT_FINISHED</constant></term> - - <listitem><para>The event loop has exited. All exit event - sources have run. If the event loop is in this state it serves - no purpose anymore, and should be freed.</para></listitem> - </varlistentry> - - </variablelist> - - <para>A simplified flow chart of the states and the calls to - transition between them is shown below. Note that - <constant>SD_EVENT_PREPARING</constant>, - <constant>SD_EVENT_RUNNING</constant> and - <constant>SD_EVENT_EXITING</constant> are not shown here.</para> - - <programlisting> - INITIAL -<---<---<---<---<---<---<---<---<---<---<---<---\ - | | - | ^ - | | - v ret == 0 | - sd_event_prepare() >--->--->--->--->- ARMED | - | | ^ - | ret > 0 | | - | | | - v v ret == 0 | - PENDING <---<---<---<---<---< sd_event_wait() >--->--->--+ - | ret > 0 ^ - | | - | | - v | - sd_event_dispatch() >--->--->--->--->--->--->--->--->--->--->/ - | ret > 0 - | ret == 0 - | - v - FINISHED - </programlisting> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, these functions return 0 or a positive integer. - On failure, they return a negative errno-style error code. In case - of <function>sd_event_prepare()</function> and - <function>sd_event_wait()</function>, a positive, non-zero return - code indicates that events are ready to be processed and zero - indicates that no events are ready. In case of - <function>sd_event_dispatch()</function>, a positive, non-zero - return code indicates that the event loop returned to its initial - state and zero indicates the event loop has - exited. <function>sd_event_get_state()</function> returns a - positive or zero state on success.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>The <parameter>event</parameter> parameter is - invalid or <constant>NULL</constant>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EBUSY</constant></term> - - <listitem><para>The event loop object is not in the right - state.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ESTALE</constant></term> - - <listitem><para>The event loop is already terminated.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><constant>-ECHILD</constant></term> - - <listitem><para>The event loop has been created in a different process.</para></listitem> - - </varlistentry> - - </variablelist> - - <para>Other errors are possible, too.</para> - </refsect1> - - <xi:include href="libsystemd-pkgconfig.xml" /> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_io</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_time</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_signal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_defer</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_exit</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_add_post</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_run</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_get_fd</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_source_set_prepare</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_get_seats.xml b/man/sd_get_seats.xml deleted file mode 100644 index 37eb3fc894..0000000000 --- a/man/sd_get_seats.xml +++ /dev/null @@ -1,164 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_get_seats" conditional='HAVE_PAM'> - - <refentryinfo> - <title>sd_get_seats</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_get_seats</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_get_seats</refname> - <refname>sd_get_sessions</refname> - <refname>sd_get_uids</refname> - <refname>sd_get_machine_names</refname> - <refpurpose>Determine available seats, sessions, logged in users and virtual machines/containers</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-login.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_get_seats</function></funcdef> - <paramdef>char ***<parameter>seats</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_get_sessions</function></funcdef> - <paramdef>char ***<parameter>sessions</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_get_uids</function></funcdef> - <paramdef>uid_t **<parameter>users</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_get_machine_names</function></funcdef> - <paramdef>char ***<parameter>machines</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_get_seats()</function> may be used to determine - all currently available local seats. Returns a - <constant>NULL</constant> terminated array of seat identifiers. - The returned array and all strings it references need to be freed - with the libc - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use. Note that instead of an empty array - <constant>NULL</constant> may be returned and should be considered - equivalent to an empty array.</para> - - <para>Similarly, <function>sd_get_sessions()</function> may be - used to determine all current login sessions.</para> - - <para>Similarly, <function>sd_get_uids()</function> may be used to - determine all Unix users who currently have login sessions.</para> - - <para>Similarly, <function>sd_get_machine_names()</function> may - be used to determine all current virtual machines and containers - on the system.</para> - - <para>Note that the returned lists are not sorted and in an - undefined order.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, <function>sd_get_seats()</function>, - <function>sd_get_sessions()</function>, - <function>sd_get_uids()</function> and - <function>sd_get_machine_names()</function> return the number of - entries in the arrays. On failure, these calls return a negative - errno-style error code.</para> - </refsect1> - - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>An input parameter was invalid (out of range, - or NULL, where that is not accepted).</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Memory allocation failed.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_get_seats()</function>, - <function>sd_get_sessions()</function>, - <function>sd_get_uids()</function> and - <function>sd_get_machine_names()</function> interfaces are - available as a shared library, which can be compiled and linked to - with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-login</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_session_get_seat</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_id128_get_machine.xml b/man/sd_id128_get_machine.xml deleted file mode 100644 index 2ad1f8f728..0000000000 --- a/man/sd_id128_get_machine.xml +++ /dev/null @@ -1,129 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_id128_get_machine"> - - <refentryinfo> - <title>sd_id128_get_machine</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_id128_get_machine</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_id128_get_machine</refname> - <refname>sd_id128_get_boot</refname> - <refpurpose>Retrieve 128-bit IDs</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-id128.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_id128_get_machine</function></funcdef> - <paramdef>sd_id128_t *<parameter>ret</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_id128_get_boot</function></funcdef> - <paramdef>sd_id128_t *<parameter>ret</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_id128_get_machine()</function> returns the - machine ID of the executing host. This reads and parses the - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry> - file. This function caches the machine ID internally to make - retrieving the machine ID a cheap operation.</para> - - <para><function>sd_id128_get_boot()</function> returns the boot ID - of the executing kernel. This reads and parses the - <filename>/proc/sys/kernel/random/boot_id</filename> file exposed - by the kernel. It is randomly generated early at boot and is - unique for every running kernel instance. See - <citerefentry project='man-pages'><refentrytitle>random</refentrytitle><manvolnum>4</manvolnum></citerefentry> - for more information. This function also internally caches the - returned ID to make this call a cheap operation.</para> - - <para>Note that <function>sd_id128_get_boot()</function> always - returns a UUID v4 compatible ID. - <function>sd_id128_get_machine()</function> will also return a - UUID v4-compatible ID on new installations but might not on older. - It is possible to convert the machine ID into a UUID v4-compatible - one. For more information, see - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - - <para>For more information about the <literal>sd_id128_t</literal> - type see - <citerefentry><refentrytitle>sd-id128</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>The two calls return 0 on success (in which case - <parameter>ret</parameter> is filled in), or a negative - errno-style error code.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_id128_get_machine()</function> and - <function>sd_id128_get_boot()</function> interfaces are available - as a shared library, which can be compiled and linked to with the - <literal>libsystemd</literal> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-id128</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>random</refentrytitle><manvolnum>4</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_id128_randomize</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_id128_randomize.xml b/man/sd_id128_randomize.xml deleted file mode 100644 index ab449d2937..0000000000 --- a/man/sd_id128_randomize.xml +++ /dev/null @@ -1,114 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_id128_randomize"> - - <refentryinfo> - <title>sd_id128_randomize</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_id128_randomize</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_id128_randomize</refname> - <refpurpose>Generate 128-bit IDs</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-id128.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_id128_randomize</function></funcdef> - <paramdef>sd_id128_t *<parameter>ret</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_id128_randomize()</function> generates a new - randomized 128-bit ID and returns it in - <parameter>ret</parameter>. Every invocation returns a new - randomly generated ID. This uses the - <filename>/dev/urandom</filename> kernel random number - generator.</para> - - <para>Note that <function>sd_id128_randomize()</function> always - returns a UUID v4-compatible ID.</para> - - <para>For more information about the <literal>sd_id128_t</literal> - type, see - <citerefentry><refentrytitle>sd-id128</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para><citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s - <option>--new-id</option> option may be used as a command line - front-end for <function>sd_id128_randomize()</function>.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>The call returns 0 on success (in which case - <parameter>ret</parameter> is filled in), or a negative - errno-style error code.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_id128_randomize()</function> interface is - available as a shared library, which can be compiled and linked to - with the - <literal>libsystemd</literal> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-id128</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>random</refentrytitle><manvolnum>4</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_id128_get_machine</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_id128_to_string.xml b/man/sd_id128_to_string.xml deleted file mode 100644 index e70c80892e..0000000000 --- a/man/sd_id128_to_string.xml +++ /dev/null @@ -1,132 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_id128_to_string"> - - <refentryinfo> - <title>sd_id128_to_string</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_id128_to_string</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_id128_to_string</refname> - <refname>sd_id128_from_string</refname> - <refpurpose>Format or parse 128-bit IDs as strings</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-id128.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>char *<function>sd_id128_to_string</function></funcdef> - <paramdef>sd_id128_t <parameter>id</parameter>, char <parameter>s</parameter>[33]</paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_id128_from_string</function></funcdef> - <paramdef>const char *<parameter>s</parameter>, sd_id128_t *<parameter>ret</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_id128_to_string()</function> formats a 128-bit - ID as a character string. It expects the ID and a string array - capable of storing 33 characters. The ID will be formatted as 32 - lowercase hexadecimal digits and be terminated by a - <constant>NUL</constant> byte.</para> - - <para><function>sd_id128_from_string()</function> implements the - reverse operation: it takes a 33 character string with 32 - hexadecimal digits (either lowercase or uppercase, terminated by - <constant>NUL</constant>) and parses them back into a 128-bit ID - returned in <parameter>ret</parameter>. Alternatively, this call - can also parse a 37-character string with a 128-bit ID formatted - as RFC UUID.</para> - - <para>For more information about the <literal>sd_id128_t</literal> - type see - <citerefentry><refentrytitle>sd-id128</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - Note that these calls operate the same way on all architectures, - i.e. the results do not depend on endianness.</para> - - <para>When formatting a 128-bit ID into a string, it is often - easier to use a format string for - <citerefentry project='man-pages'><refentrytitle>printf</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - This is easily done using the - <function>SD_ID128_FORMAT_STR</function> and - <function>SD_ID128_FORMAT_VAL()</function> macros. For more - information see - <citerefentry><refentrytitle>sd-id128</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para><function>sd_id128_to_string()</function> always succeeds - and returns a pointer to the string array passed in. - <function>sd_id128_from_string</function> returns 0 on success, in - which case <parameter>ret</parameter> is filled in, or a negative - errno-style error code.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_id128_to_string()</function> and - <function>sd_id128_from_string()</function> interfaces are - available as a shared library, which can be compiled and linked to - with the - <literal>libsystemd</literal> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-id128</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>printf</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_is_fifo.xml b/man/sd_is_fifo.xml deleted file mode 100644 index 627cb87aaf..0000000000 --- a/man/sd_is_fifo.xml +++ /dev/null @@ -1,200 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_is_fifo" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_is_fifo</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_is_fifo</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_is_fifo</refname> - <refname>sd_is_socket</refname> - <refname>sd_is_socket_inet</refname> - <refname>sd_is_socket_unix</refname> - <refname>sd_is_mq</refname> - <refname>sd_is_special</refname> - <refpurpose>Check the type of a file descriptor</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-daemon.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_is_fifo</function></funcdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>const char *<parameter>path</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_is_socket</function></funcdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>int <parameter>family</parameter></paramdef> - <paramdef>int <parameter>type</parameter></paramdef> - <paramdef>int <parameter>listening</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_is_socket_inet</function></funcdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>int <parameter>family</parameter></paramdef> - <paramdef>int <parameter>type</parameter></paramdef> - <paramdef>int <parameter>listening</parameter></paramdef> - <paramdef>uint16_t <parameter>port</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_is_socket_unix</function></funcdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>int <parameter>type</parameter></paramdef> - <paramdef>int <parameter>listening</parameter></paramdef> - <paramdef>const char *<parameter>path</parameter></paramdef> - <paramdef>size_t <parameter>length</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_is_mq</function></funcdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>const char *<parameter>path</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_is_special</function></funcdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>const char *<parameter>path</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_is_fifo()</function> may be called to check - whether the specified file descriptor refers to a FIFO or pipe. If - the <parameter>path</parameter> parameter is not - <constant>NULL</constant>, it is checked whether the FIFO is bound - to the specified file system path.</para> - - <para><function>sd_is_socket()</function> may be called to check - whether the specified file descriptor refers to a socket. If the - <parameter>family</parameter> parameter is not - <constant>AF_UNSPEC</constant>, it is checked whether the socket - is of the specified family (AF_UNIX, <constant>AF_INET</constant>, - ...). If the <parameter>type</parameter> parameter is not 0, it is - checked whether the socket is of the specified type - (<constant>SOCK_STREAM</constant>, - <constant>SOCK_DGRAM</constant>, ...). If the - <parameter>listening</parameter> parameter is positive, it is - checked whether the socket is in accepting mode, i.e. - <function>listen()</function> has been called for it. If - <parameter>listening</parameter> is 0, it is checked whether the - socket is not in this mode. If the parameter is negative, no such - check is made. The <parameter>listening</parameter> parameter - should only be used for stream sockets and should be set to a - negative value otherwise.</para> - - <para><function>sd_is_socket_inet()</function> is similar to - <function>sd_is_socket()</function>, but optionally checks the - IPv4 or IPv6 port number the socket is bound to, unless - <parameter>port</parameter> is zero. For this call - <parameter>family</parameter> must be passed as either - <constant>AF_UNSPEC</constant>, <constant>AF_INET</constant>, or - <constant>AF_INET6</constant>.</para> - - <para><function>sd_is_socket_unix()</function> is similar to - <function>sd_is_socket()</function> but optionally checks the - <constant>AF_UNIX</constant> path the socket is bound to, unless - the <parameter>path</parameter> parameter is - <constant>NULL</constant>. For normal file system - <constant>AF_UNIX</constant> sockets, set the - <parameter>length</parameter> parameter to 0. For Linux abstract - namespace sockets, set the <parameter>length</parameter> to the - size of the address, including the initial 0 byte, and set the - <parameter>path</parameter> to the initial 0 byte of the socket - address.</para> - - <para><function>sd_is_mq()</function> may be called to check - whether the specified file descriptor refers to a POSIX message - queue. If the <parameter>path</parameter> parameter is not - <constant>NULL</constant>, it is checked whether the message queue - is bound to the specified name.</para> - - <para><function>sd_is_special()</function> may be called to check - whether the specified file descriptor refers to a special file. If - the <parameter>path</parameter> parameter is not - <constant>NULL</constant>, it is checked whether the file - descriptor is bound to the specified file name. Special files in - this context are character device nodes and files in - <filename>/proc</filename> or <filename>/sys</filename>.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On failure, these calls return a negative errno-style error - code. If the file descriptor is of the specified type and bound to - the specified address, a positive return value is returned, - otherwise zero.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <xi:include href="libsystemd-pkgconfig.xml" xpointer="pkgconfig-text"/> - - <para>Internally, these function use a combination of - <filename>fstat()</filename> and - <filename>getsockname()</filename> to check the file descriptor - type and where it is bound to.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_journal_add_match.xml b/man/sd_journal_add_match.xml deleted file mode 100644 index 98415d53fd..0000000000 --- a/man/sd_journal_add_match.xml +++ /dev/null @@ -1,216 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_journal_add_match"> - - <refentryinfo> - <title>sd_journal_add_match</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_journal_add_match</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_journal_add_match</refname> - <refname>sd_journal_add_disjunction</refname> - <refname>sd_journal_add_conjunction</refname> - <refname>sd_journal_flush_matches</refname> - <refpurpose>Add or remove entry matches</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-journal.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_journal_add_match</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>const void *<parameter>data</parameter></paramdef> - <paramdef>size_t <parameter>size</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_add_disjunction</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_add_conjunction</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>void <function>sd_journal_flush_matches</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_journal_add_match()</function> adds a match by - which to filter the entries of the journal file. Matches applied - with this call will filter what can be iterated through and read - from the journal file via calls like - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>sd_journal_get_data</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - Parameter <parameter>data</parameter> must be of the form - <literal><replaceable>FIELD</replaceable>=<replaceable>value</replaceable></literal>, - where the <replaceable>FIELD</replaceable> part is a short uppercase string consisting only - of 0–9, A–Z and the underscore; it may not begin with two underscores or be the empty - string. The <replaceable>value</replaceable> part may be anything, including binary. Parameter - <parameter>size</parameter> specifies the number of bytes in <parameter>data</parameter> - (i.e. the length of <replaceable>FIELD</replaceable>, plus one, plus the length of - <replaceable>value</replaceable>). Parameter <parameter>size</parameter> may also be - specified as <constant>0</constant>, in which case <parameter>data</parameter> - must be a <constant>NUL</constant>-terminated string, and the bytes before the terminating - zero are used as the match.</para> - - <para>If a match is applied, only entries with this field set - will be iterated. Multiple matches may be active at the same time: - If they apply to different fields, only entries with both fields - set like this will be iterated. If they apply to the same fields, - only entries where the field takes one of the specified values - will be iterated. Well known fields are documented in - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>. - Whenever a new match is added the current entry position is reset, - and - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry> - (or a similar call) needs to be called before entries can be read - again.</para> - - <para><function>sd_journal_add_disjunction()</function> may be - used to insert a disjunction (i.e. logical OR) in the match list. - If this call is invoked, all previously added matches since the - last invocation of - <function>sd_journal_add_disjunction()</function> or - <function>sd_journal_add_conjunction()</function> are combined in - an OR with all matches added afterwards, until - <function>sd_journal_add_disjunction()</function> or - <function>sd_journal_add_conjunction()</function> is invoked again - to begin the next OR or AND term. </para> - - <para><function>sd_journal_add_conjunction()</function> may be - used to insert a conjunction (i.e. logical AND) in the match list. - If this call is invoked, all previously added matches since the - last invocation of - <function>sd_journal_add_conjunction()</function> are combined in - an AND with all matches added afterwards, until - <function>sd_journal_add_conjunction()</function> is invoked again - to begin the next AND term. The combination of - <function>sd_journal_add_match()</function>, - <function>sd_journal_add_disjunction()</function> and - <function>sd_journal_add_conjunction()</function> may be used to - build complex search terms, even though full logical expressions - are not available. Note that - <function>sd_journal_add_conjunction()</function> operates one - level 'higher' than - <function>sd_journal_add_disjunction()</function>. It is hence - possible to build an expression of AND terms, consisting of OR - terms, consisting of AND terms, consisting of OR terms of matches - (the latter OR expression is implicitly created for matches with - the same field name, see above).</para> - - <para><function>sd_journal_flush_matches()</function> may be used - to flush all matches, disjunction and conjunction terms again. - After this call all filtering is removed and all entries in the - journal will be iterated again.</para> - - <para>Note that filtering via matches only applies to the way the - journal is read, it has no effect on storage on disk.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para><function>sd_journal_add_match()</function>, - <function>sd_journal_add_disjunction()</function> and - <function>sd_journal_add_conjunction()</function> - return 0 on success or a negative errno-style error - code. <function>sd_journal_flush_matches()</function> - returns nothing.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_journal_add_match()</function>, - <function>sd_journal_add_disjunction()</function>, - <function>sd_journal_add_conjunction()</function> and - <function>sd_journal_flush_matches()</function> - interfaces are available as a shared library, which can - be compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>Examples</title> - - <para>The following example adds matches to a journal context - object to iterate only through messages generated by the Avahi - service at the four error log levels, plus all messages of the - message ID 03bb1dab98ab4ecfbf6fff2738bdd964 coming from any - service (this example lacks the necessary error checking):</para> - - <programlisting>... -int add_matches(sd_journal *j) { - sd_journal_add_match(j, "_SYSTEMD_UNIT=avahi-daemon.service", 0); - sd_journal_add_match(j, "PRIORITY=0", 0); - sd_journal_add_match(j, "PRIORITY=1", 0); - sd_journal_add_match(j, "PRIORITY=2", 0); - sd_journal_add_match(j, "PRIORITY=3", 0); - sd_journal_add_disjunction(j); - sd_journal_add_match(j, "MESSAGE_ID=03bb1dab98ab4ecfbf6fff2738bdd964", 0); -}</programlisting> - - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_open</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_data</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_journal_enumerate_fields.xml b/man/sd_journal_enumerate_fields.xml deleted file mode 100644 index fa5884106b..0000000000 --- a/man/sd_journal_enumerate_fields.xml +++ /dev/null @@ -1,161 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2016 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_journal_enumerate_fields"> - - <refentryinfo> - <title>sd_journal_enumerate_fields</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_journal_enumerate_fields</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_journal_enumerate_fields</refname> - <refname>sd_journal_restart_fields</refname> - <refname>SD_JOURNAL_FOREACH_FIELD</refname> - <refpurpose>Read used field names from the journal</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-journal.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_journal_enumerate_fields</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>const char **<parameter>field</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>void <function>sd_journal_restart_fields</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef><function>SD_JOURNAL_FOREACH_FIELD</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>const char *<parameter>field</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_journal_enumerate_fields()</function> may be used to iterate through all field names used in the - opened journal files. On each invocation the next field name is returned. The order of the returned field names is - not defined. It takes two arguments: the journal context object, plus a pointer to a constant string pointer where - the field name is stored in. The returned data is in a read-only memory map and is only valid until the next - invocation of <function>sd_journal_enumerate_fields()</function>. Note that this call is subject to the data field - size threshold as controlled by <function>sd_journal_set_data_threshold()</function>.</para> - - <para><function>sd_journal_restart_fields()</function> resets the field name enumeration index to the beginning of - the list. The next invocation of <function>sd_journal_enumerate_fields()</function> will return the first field - name again.</para> - - <para>The <function>SD_JOURNAL_FOREACH_FIELD()</function> macro may be used as a handy wrapper around - <function>sd_journal_restart_fields()</function> and <function>sd_journal_enumerate_fields()</function>.</para> - - <para>These functions currently are not influenced by matches set with <function>sd_journal_add_match()</function> - but this might change in a later version of this software.</para> - - <para>To retrieve the possible values a specific field can take use - <citerefentry><refentrytitle>sd_journal_query_unique</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para><function>sd_journal_enumerate_fields()</function> returns a - positive integer if the next field name has been read, 0 when no - more field names are known, or a negative errno-style error code. - <function>sd_journal_restart_fields()</function> returns - nothing.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_journal_enumerate_fields()</function> and <function>sd_journal_restart_fields()</function> - interfaces are available as a shared library, which can be compiled and linked to with the - <constant>libsystemd</constant> <citerefentry - project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> file.</para> - </refsect1> - - <refsect1> - <title>Examples</title> - - <para>Use the <function>SD_JOURNAL_FOREACH_FIELD</function> macro to iterate through all field names in use in the - current journal.</para> - - <programlisting>#include <stdio.h> -#include <string.h> -#include <systemd/sd-journal.h> - -int main(int argc, char *argv[]) { - sd_journal *j; - const char *field; - int r; - - r = sd_journal_open(&j, SD_JOURNAL_LOCAL_ONLY); - if (r < 0) { - fprintf(stderr, "Failed to open journal: %s\n", strerror(-r)); - return 1; - } - SD_JOURNAL_FOREACH_FIELD(j, field) - printf("%s\n", field); - sd_journal_close(j); - return 0; -}</programlisting> - - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_open</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_query_unique</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_data</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_add_match</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_journal_get_catalog.xml b/man/sd_journal_get_catalog.xml deleted file mode 100644 index c19eb11b20..0000000000 --- a/man/sd_journal_get_catalog.xml +++ /dev/null @@ -1,137 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_journal_get_catalog"> - - <refentryinfo> - <title>sd_journal_get_catalog</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_journal_get_catalog</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_journal_get_catalog</refname> - <refname>sd_journal_get_catalog_for_message_id</refname> - <refpurpose>Retrieve message catalog entry</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-journal.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_journal_get_catalog</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>char **<parameter>ret</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_get_catalog_for_message_id</function></funcdef> - <paramdef>sd_id128_t <parameter>id</parameter></paramdef> - <paramdef>char **<parameter>ret</parameter></paramdef> - </funcprototype> - - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_journal_get_catalog()</function> retrieves a - message catalog entry for the current journal entry. This will - look up an entry in the message catalog by using the - <literal>MESSAGE_ID=</literal> field of the current journal entry. - Before returning the entry all journal field names in the catalog - entry text enclosed in "@" will be replaced by the respective - field values of the current entry. If a field name referenced in - the message catalog entry does not exist, in the current journal - entry, the "@" will be removed, but the field name otherwise left - untouched.</para> - - <para><function>sd_journal_get_catalog_for_message_id()</function> - works similar to <function>sd_journal_get_catalog()</function> but - the entry is looked up by the specified message ID (no open - journal context is necessary for this), and no field substitution - is performed.</para> - - <para>For more information about the journal message catalog - please refer to the <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/catalog">Journal - Message Catalogs</ulink> documentation page.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para><function>sd_journal_get_catalog()</function> and - <function>sd_journal_get_catalog_for_message_id()</function> - return 0 on success or a negative errno-style error code. If no - matching message catalog entry is found, -ENOENT is - returned.</para> - - <para>On successful return, <parameter>ret</parameter> points to a - new string, which must be freed with - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - </para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_journal_get_catalog()</function> and - <function>sd_journal_get_catalog_for_message_id()</function> - interfaces are available as a shared library, which can be - compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_open</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_data</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>malloc</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_journal_get_cursor.xml b/man/sd_journal_get_cursor.xml deleted file mode 100644 index a400d8b1b5..0000000000 --- a/man/sd_journal_get_cursor.xml +++ /dev/null @@ -1,144 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_journal_get_cursor"> - - <refentryinfo> - <title>sd_journal_get_cursor</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_journal_get_cursor</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_journal_get_cursor</refname> - <refname>sd_journal_test_cursor</refname> - <refpurpose>Get cursor string for or test cursor string against the current journal entry</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-journal.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_journal_get_cursor</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>char **<parameter>cursor</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_test_cursor</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>const char *<parameter>cursor</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_journal_get_cursor()</function> returns a - cursor string for the current journal entry. A cursor is a - serialization of the current journal position formatted as text. - The string only contains printable characters and can be passed - around in text form. The cursor identifies a journal entry - globally and in a stable way and may be used to later seek to it - via - <citerefentry><refentrytitle>sd_journal_seek_cursor</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - The cursor string should be considered opaque and not be parsed by - clients. Seeking to a cursor position without the specific entry - being available locally will seek to the next closest (in terms of - time) available entry. The call takes two arguments: a journal - context object and a pointer to a string pointer where the cursor - string will be placed. The string is allocated via libc - <citerefentry project='man-pages'><refentrytitle>malloc</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and should be freed after use with - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para>Note that <function>sd_journal_get_cursor()</function> will - not work before - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry> - (or related call) has been called at least once, in order to - position the read pointer at a valid entry.</para> - - <para><function>sd_journal_test_cursor()</function> - may be used to check whether the current position in - the journal matches the specified cursor. This is - useful since cursor strings do not uniquely identify - an entry: the same entry might be referred to by - multiple different cursor strings, and hence string - comparing cursors is not possible. Use this call to - verify after an invocation of - <citerefentry><refentrytitle>sd_journal_seek_cursor</refentrytitle><manvolnum>3</manvolnum></citerefentry> - whether the entry being sought to was actually found - in the journal or the next closest entry was used - instead.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para><function>sd_journal_get_cursor()</function> returns 0 on - success or a negative errno-style error code. - <function>sd_journal_test_cursor()</function> returns positive if - the current entry matches the specified cursor, 0 if it does not - match the specified cursor or a negative errno-style error code on - failure.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_journal_get_cursor()</function> and - <function>sd_journal_test_cursor()</function> interfaces are - available as a shared library, which can be compiled and linked to - with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_open</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_seek_cursor</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_journal_get_cutoff_realtime_usec.xml b/man/sd_journal_get_cutoff_realtime_usec.xml deleted file mode 100644 index 23e7cc65e8..0000000000 --- a/man/sd_journal_get_cutoff_realtime_usec.xml +++ /dev/null @@ -1,145 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_journal_get_cutoff_realtime_usec"> - - <refentryinfo> - <title>sd_journal_get_cutoff_realtime_usec</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_journal_get_cutoff_realtime_usec</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_journal_get_cutoff_realtime_usec</refname> - <refname>sd_journal_get_cutoff_monotonic_usec</refname> - <refpurpose>Read cut-off timestamps from the current journal entry</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-journal.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_journal_get_cutoff_realtime_usec</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>uint64_t *<parameter>from</parameter></paramdef> - <paramdef>uint64_t *<parameter>to</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_get_cutoff_monotonic_usec</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>sd_id128_t <parameter>boot_id</parameter></paramdef> - <paramdef>uint64_t *<parameter>from</parameter></paramdef> - <paramdef>uint64_t *<parameter>to</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_journal_get_cutoff_realtime_usec()</function> - retrieves the realtime (wallclock) timestamps of the first and - last entries accessible in the journal. It takes three arguments: - the journal context object <parameter>j</parameter> and two - pointers <parameter>from</parameter> and <parameter>to</parameter> - pointing at 64-bit unsigned integers to store the timestamps in. - The timestamps are in microseconds since the epoch, i.e. - <constant>CLOCK_REALTIME</constant>. Either one of the two - timestamp arguments may be passed as <constant>NULL</constant> in - case the timestamp is not needed, but not both.</para> - - <para><function>sd_journal_get_cutoff_monotonic_usec()</function> - retrieves the monotonic timestamps of the first and last entries - accessible in the journal. It takes three arguments: the journal - context object <parameter>j</parameter>, a 128-bit identifier for - the boot <parameter>boot_id</parameter>, and two pointers to - 64-bit unsigned integers to store the timestamps, - <parameter>from</parameter> and <parameter>to</parameter>. The - timestamps are in microseconds since boot-up of the specific boot, - i.e. <constant>CLOCK_MONOTONIC</constant>. Since the monotonic - clock begins new with every reboot it only defines a well-defined - point in time when used together with an identifier identifying - the boot, see - <citerefentry><refentrytitle>sd_id128_get_boot</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for more information. The function will return the timestamps for - the boot identified by the passed boot ID. Either one of the two - timestamp arguments may be passed as <constant>NULL</constant> in - case the timestamp is not needed, but not both.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para><function>sd_journal_get_cutoff_realtime_usec()</function> - and <function>sd_journal_get_cutoff_monotonic_usec()</function> - return 1 on success, 0 if not suitable entries are in the journal - or a negative errno-style error code.</para> - - <para>Locations pointed to by parameters - <parameter>from</parameter> and <parameter>to</parameter> will be - set only if the return value is positive, and obviously, the - parameters are non-null.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The - <function>sd_journal_get_cutoff_realtime_usec()</function> and - <function>sd_journal_get_cutoff_monotonic_usec()</function> - interfaces are available as a shared library, which can be - compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_open</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_realtime_usec</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_id128_get_boot</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>clock_gettime</refentrytitle><manvolnum>2</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_journal_get_data.xml b/man/sd_journal_get_data.xml deleted file mode 100644 index 908ee7db16..0000000000 --- a/man/sd_journal_get_data.xml +++ /dev/null @@ -1,235 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_journal_get_data"> - - <refentryinfo> - <title>sd_journal_get_data</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_journal_get_data</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_journal_get_data</refname> - <refname>sd_journal_enumerate_data</refname> - <refname>sd_journal_restart_data</refname> - <refname>SD_JOURNAL_FOREACH_DATA</refname> - <refname>sd_journal_set_data_threshold</refname> - <refname>sd_journal_get_data_threshold</refname> - <refpurpose>Read data fields from the current journal entry</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-journal.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_journal_get_data</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>const char *<parameter>field</parameter></paramdef> - <paramdef>const void **<parameter>data</parameter></paramdef> - <paramdef>size_t *<parameter>length</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_enumerate_data</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>const void **<parameter>data</parameter></paramdef> - <paramdef>size_t *<parameter>length</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>void <function>sd_journal_restart_data</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef><function>SD_JOURNAL_FOREACH_DATA</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>const void *<parameter>data</parameter></paramdef> - <paramdef>size_t <parameter>length</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_set_data_threshold</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>size_t <parameter>sz</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_get_data_threshold</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>size_t *<parameter>sz</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_journal_get_data()</function> gets the data - object associated with a specific field from the current journal - entry. It takes four arguments: the journal context object, a - string with the field name to request, plus a pair of pointers to - pointer/size variables where the data object and its size shall be - stored in. The field name should be an entry field name. - Well-known field names are listed in - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>. - The returned data is in a read-only memory map and is only valid - until the next invocation of - <function>sd_journal_get_data()</function> or - <function>sd_journal_enumerate_data()</function>, or the read - pointer is altered. Note that the data returned will be prefixed - with the field name and '='. Also note that, by default, data fields - larger than 64K might get truncated to 64K. This threshold may be - changed and turned off with - <function>sd_journal_set_data_threshold()</function> (see - below).</para> - - <para><function>sd_journal_enumerate_data()</function> may be used - to iterate through all fields of the current entry. On each - invocation the data for the next field is returned. The order of - these fields is not defined. The data returned is in the same - format as with <function>sd_journal_get_data()</function> and also - follows the same life-time semantics.</para> - - <para><function>sd_journal_restart_data()</function> resets the - data enumeration index to the beginning of the entry. The next - invocation of <function>sd_journal_enumerate_data()</function> - will return the first field of the entry again.</para> - - <para>Note that the <function>SD_JOURNAL_FOREACH_DATA()</function> - macro may be used as a handy wrapper around - <function>sd_journal_restart_data()</function> and - <function>sd_journal_enumerate_data()</function>.</para> - - <para>Note that these functions will not work before - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry> - (or related call) has been called at least once, in order to - position the read pointer at a valid entry.</para> - - <para><function>sd_journal_set_data_threshold()</function> may be - used to change the data field size threshold for data returned by - <function>sd_journal_get_data()</function>, - <function>sd_journal_enumerate_data()</function> and - <function>sd_journal_enumerate_unique()</function>. This threshold - is a hint only: it indicates that the client program is interested - only in the initial parts of the data fields, up to the threshold - in size — but the library might still return larger data objects. - That means applications should not rely exclusively on this - setting to limit the size of the data fields returned, but need to - apply a explicit size limit on the returned data as well. This - threshold defaults to 64K by default. To retrieve the complete - data fields this threshold should be turned off by setting it to - 0, so that the library always returns the complete data objects. - It is recommended to set this threshold as low as possible since - this relieves the library from having to decompress large - compressed data objects in full.</para> - - <para><function>sd_journal_get_data_threshold()</function> returns - the currently configured data field size threshold.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para><function>sd_journal_get_data()</function> returns 0 on - success or a negative errno-style error code. If the current entry - does not include the specified field, -ENOENT is returned. If - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry> - has not been called at least once, -EADDRNOTAVAIL is returned. - <function>sd_journal_enumerate_data()</function> returns a - positive integer if the next field has been read, 0 when no more - fields are known, or a negative errno-style error code. - <function>sd_journal_restart_data()</function> returns nothing. - <function>sd_journal_set_data_threshold()</function> and - <function>sd_journal_get_threshold()</function> return 0 on - success or a negative errno-style error code.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_journal_get_data()</function>, - <function>sd_journal_enumerate_data()</function>, - <function>sd_journal_restart_data()</function>, - <function>sd_journal_set_data_threshold()</function> and - <function>sd_journal_get_data_threshold()</function> interfaces - are available as a shared library, which can be compiled and - linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>Examples</title> - - <para>See - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for a complete example how to use - <function>sd_journal_get_data()</function>.</para> - - <para>Use the - <function>SD_JOURNAL_FOREACH_DATA</function> macro to - iterate through all fields of the current journal - entry:</para> - - <programlisting>... -int print_fields(sd_journal *j) { - const void *data; - size_t length; - SD_JOURNAL_FOREACH_DATA(j, data, length) - printf("%.*s\n", (int) length, data); -} -...</programlisting> - - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_open</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_realtime_usec</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_query_unique</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_journal_get_fd.xml b/man/sd_journal_get_fd.xml deleted file mode 100644 index 61293f7f99..0000000000 --- a/man/sd_journal_get_fd.xml +++ /dev/null @@ -1,332 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_journal_get_fd"> - - <refentryinfo> - <title>sd_journal_get_fd</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_journal_get_fd</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_journal_get_fd</refname> - <refname>sd_journal_get_events</refname> - <refname>sd_journal_get_timeout</refname> - <refname>sd_journal_process</refname> - <refname>sd_journal_wait</refname> - <refname>sd_journal_reliable_fd</refname> - <refname>SD_JOURNAL_NOP</refname> - <refname>SD_JOURNAL_APPEND</refname> - <refname>SD_JOURNAL_INVALIDATE</refname> - <refpurpose>Journal change notification - interface</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-journal.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_journal_get_fd</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_get_events</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_get_timeout</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>uint64_t *<parameter>timeout_usec</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_process</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_wait</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>uint64_t <parameter>timeout_usec</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_reliable_fd</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_journal_get_fd()</function> returns a file - descriptor that may be asynchronously polled in an external event - loop and is signaled as soon as the journal changes, because new - entries or files were added, rotation took place, or files have - been deleted, and similar. The file descriptor is suitable for - usage in - <citerefentry><refentrytitle>poll</refentrytitle><manvolnum>2</manvolnum></citerefentry>. - Use <function>sd_journal_get_events()</function> for an events - mask to watch for. The call takes one argument: the journal - context object. Note that not all file systems are capable of - generating the necessary events for wakeups from this file - descriptor for changes to be noticed immediately. In particular - network files systems do not generate suitable file change events - in all cases. Cases like this can be detected with - <function>sd_journal_reliable_fd()</function>, below. - <function>sd_journal_get_timeout()</function> will ensure in these - cases that wake-ups happen frequently enough for changes to be - noticed, although with a certain latency.</para> - - <para><function>sd_journal_get_events()</function> will return the - <function>poll()</function> mask to wait for. This function will - return a combination of <constant>POLLIN</constant> and - <constant>POLLOUT</constant> and similar to fill into the - <literal>.events</literal> field of <varname>struct - pollfd</varname>.</para> - - <para><function>sd_journal_get_timeout()</function> will return a - timeout value for usage in <function>poll()</function>. This - returns a value in microseconds since the epoch of - <constant>CLOCK_MONOTONIC</constant> for timing out - <function>poll()</function> in <varname>timeout_usec</varname>. - See - <citerefentry><refentrytitle>clock_gettime</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details about <constant>CLOCK_MONOTONIC</constant>. If there - is no timeout to wait for, this will fill in <constant>(uint64_t) - -1</constant> instead. Note that <function>poll()</function> takes - a relative timeout in milliseconds rather than an absolute timeout - in microseconds. To convert the absolute 'us' timeout into - relative 'ms', use code like the following:</para> - - <programlisting>uint64_t t; -int msec; -sd_journal_get_timeout(m, &t); -if (t == (uint64_t) -1) - msec = -1; -else { - struct timespec ts; - uint64_t n; - clock_getttime(CLOCK_MONOTONIC, &ts); - n = (uint64_t) ts.tv_sec * 1000000 + ts.tv_nsec / 1000; - msec = t > n ? (int) ((t - n + 999) / 1000) : 0; -}</programlisting> - - <para>The code above does not do any error checking for brevity's - sake. The calculated <varname>msec</varname> integer can be passed - directly as <function>poll()</function>'s timeout - parameter.</para> - - <para>After each <function>poll()</function> wake-up - <function>sd_journal_process()</function> needs to be called to - process events. This call will also indicate what kind of change - has been detected (see below; note that spurious wake-ups are - possible).</para> - - <para>A synchronous alternative for using - <function>sd_journal_get_fd()</function>, - <function>sd_journal_get_events()</function>, - <function>sd_journal_get_timeout()</function> and - <function>sd_journal_process()</function> is - <function>sd_journal_wait()</function>. It will synchronously wait - until the journal gets changed. The maximum time this call sleeps - may be controlled with the <parameter>timeout_usec</parameter> - parameter. Pass <constant>(uint64_t) -1</constant> to wait - indefinitely. Internally this call simply combines - <function>sd_journal_get_fd()</function>, - <function>sd_journal_get_events()</function>, - <function>sd_journal_get_timeout()</function>, - <function>poll()</function> and - <function>sd_journal_process()</function> into one.</para> - - <para><function>sd_journal_reliable_fd()</function> may be used to - check whether the wakeup events from the file descriptor returned - by <function>sd_journal_get_fd()</function> are known to be - immediately triggered. On certain file systems where file change - events from the OS are not available (such as NFS) changes need to - be polled for repeatedly, and hence are detected only with a - certain latency. This call will return a positive value if the - journal changes are detected immediately and zero when they need - to be polled for and hence might be noticed only with a certain - latency. Note that there is usually no need to invoke this function - directly as <function>sd_journal_get_timeout()</function> on these - file systems will ask for timeouts explicitly anyway.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para><function>sd_journal_get_fd()</function> returns a valid - file descriptor on success or a negative errno-style error - code.</para> - - <para><function>sd_journal_get_events()</function> returns a - combination of <constant>POLLIN</constant>, - <constant>POLLOUT</constant> and suchlike on success or a negative - errno-style error code.</para> - - <para><function>sd_journal_reliable_fd()</function> returns a - positive integer if the file descriptor returned by - <function>sd_journal_get_fd()</function> will generate wake-ups - immediately for all journal changes. Returns 0 if there might be a - latency involved.</para> - - <para><function>sd_journal_process()</function> and - <function>sd_journal_wait()</function> return one of - <constant>SD_JOURNAL_NOP</constant>, - <constant>SD_JOURNAL_APPEND</constant> or - <constant>SD_JOURNAL_INVALIDATE</constant> on success or a - negative errno-style error code. If - <constant>SD_JOURNAL_NOP</constant> is returned, the journal did - not change since the last invocation. If - <constant>SD_JOURNAL_APPEND</constant> is returned, new entries - have been appended to the end of the journal. If - <constant>SD_JOURNAL_INVALIDATE</constant>, journal files were - added or removed (possibly due to rotation). In the latter event, - live-view UIs should probably refresh their entire display, while - in the case of <constant>SD_JOURNAL_APPEND</constant>, it is - sufficient to simply continue reading at the previous end of the - journal.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_journal_get_fd()</function>, - <function>sd_journal_get_events()</function>, - <function>sd_journal_reliable_fd()</function>, - <function>sd_journal_process()</function> and - <function>sd_journal_wait()</function> interfaces are available as - a shared library, which can be compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>Examples</title> - - <para>Iterating through the journal, in a live view tracking all - changes:</para> - - <programlisting>#include <stdio.h> -#include <string.h> -#include <systemd/sd-journal.h> - -int main(int argc, char *argv[]) { - int r; - sd_journal *j; - r = sd_journal_open(&j, SD_JOURNAL_LOCAL_ONLY); - if (r < 0) { - fprintf(stderr, "Failed to open journal: %s\n", strerror(-r)); - return 1; - } - for (;;) { - const void *d; - size_t l; - r = sd_journal_next(j); - if (r < 0) { - fprintf(stderr, "Failed to iterate to next entry: %s\n", strerror(-r)); - break; - } - if (r == 0) { - /* Reached the end, let's wait for changes, and try again */ - r = sd_journal_wait(j, (uint64_t) -1); - if (r < 0) { - fprintf(stderr, "Failed to wait for changes: %s\n", strerror(-r)); - break; - } - continue; - } - r = sd_journal_get_data(j, "MESSAGE", &d, &l); - if (r < 0) { - fprintf(stderr, "Failed to read message field: %s\n", strerror(-r)); - continue; - } - printf("%.*s\n", (int) l, (const char*) d); - } - sd_journal_close(j); - return 0; -}</programlisting> - - <para>Waiting with <function>poll()</function> (this - example lacks all error checking for the sake of - simplicity):</para> - - <programlisting>#include <poll.h> -#include <systemd/sd-journal.h> - -int wait_for_changes(sd_journal *j) { - struct pollfd pollfd; - int msec; - - sd_journal_get_timeout(m, &t); - if (t == (uint64_t) -1) - msec = -1; - else { - struct timespec ts; - uint64_t n; - clock_getttime(CLOCK_MONOTONIC, &ts); - n = (uint64_t) ts.tv_sec * 1000000 + ts.tv_nsec / 1000; - msec = t > n ? (int) ((t - n + 999) / 1000) : 0; - } - - pollfd.fd = sd_journal_get_fd(j); - pollfd.events = sd_journal_get_events(j); - poll(&pollfd, 1, msec); - return sd_journal_process(j); -}</programlisting> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_open</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>poll</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - <citerefentry><refentrytitle>clock_gettime</refentrytitle><manvolnum>2</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_journal_get_realtime_usec.xml b/man/sd_journal_get_realtime_usec.xml deleted file mode 100644 index 607d74666b..0000000000 --- a/man/sd_journal_get_realtime_usec.xml +++ /dev/null @@ -1,141 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_journal_get_realtime_usec"> - - <refentryinfo> - <title>sd_journal_get_realtime_usec</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_journal_get_realtime_usec</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_journal_get_realtime_usec</refname> - <refname>sd_journal_get_monotonic_usec</refname> - <refpurpose>Read timestamps from the current journal entry</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-journal.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_journal_get_realtime_usec</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>uint64_t *<parameter>usec</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_get_monotonic_usec</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>uint64_t *<parameter>usec</parameter></paramdef> - <paramdef>sd_id128_t *<parameter>boot_id</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_journal_get_realtime_usec()</function> gets the - realtime (wallclock) timestamp of the current journal entry. It - takes two arguments: the journal context object and a pointer to a - 64-bit unsigned integer to store the timestamp in. The timestamp - is in microseconds since the epoch, i.e. - <constant>CLOCK_REALTIME</constant>.</para> - - <para><function>sd_journal_get_monotonic_usec()</function> gets - the monotonic timestamp of the current journal entry. It takes - three arguments: the journal context object, a pointer to a 64-bit - unsigned integer to store the timestamp in, as well as a 128-bit - ID buffer to store the boot ID of the monotonic timestamp. The - timestamp is in microseconds since boot-up of the specific boot, - i.e. <constant>CLOCK_MONOTONIC</constant>. Since the monotonic - clock begins new with every reboot, it only defines a well-defined - point in time when used together with an identifier identifying - the boot. See - <citerefentry><refentrytitle>sd_id128_get_boot</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for more information. If the boot ID parameter is passed - <constant>NULL</constant>, the function will fail if the monotonic - timestamp of the current entry is not of the current system - boot.</para> - - <para>Note that these functions will not work before - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry> - (or related call) has been called at least - once, in order to position the read pointer at a valid entry.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para><function>sd_journal_get_realtime_usec()</function> and - <function>sd_journal_get_monotonic_usec()</function> returns 0 on - success or a negative errno-style error code. If the boot ID - parameter was passed <constant>NULL</constant> and the monotonic - timestamp of the current journal entry is not of the current - system boot, <constant>-ESTALE</constant> is returned by - <function>sd_journal_get_monotonic_usec()</function>.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_journal_get_realtime_usec()</function> and - <function>sd_journal_get_monotonic_usec()</function> interfaces - are available as a shared library, which can be compiled and - linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_open</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_data</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_id128_get_boot</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>clock_gettime</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_cutoff_realtime_usec</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_journal_get_usage.xml b/man/sd_journal_get_usage.xml deleted file mode 100644 index 72c804d834..0000000000 --- a/man/sd_journal_get_usage.xml +++ /dev/null @@ -1,100 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_journal_get_usage"> - - <refentryinfo> - <title>sd_journal_get_usage</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_journal_get_usage</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_journal_get_usage</refname> - <refpurpose>Journal disk usage</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-journal.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_journal_get_usage</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>uint64_t *<parameter>bytes</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_journal_get_usage()</function> determines the - total disk space currently used by journal files (in bytes). If - <constant>SD_JOURNAL_LOCAL_ONLY</constant> was passed when opening - the journal, this value will only reflect the size of journal - files of the local host, otherwise of all hosts.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para><function>sd_journal_get_usage()</function> returns 0 on - success or a negative errno-style error code.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_journal_get_usage()</function> interface is - available as a shared library, which can be compiled and linked to - with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_open</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - </para> - </refsect1> - -</refentry> diff --git a/man/sd_journal_has_runtime_files.xml b/man/sd_journal_has_runtime_files.xml deleted file mode 100644 index 237e649206..0000000000 --- a/man/sd_journal_has_runtime_files.xml +++ /dev/null @@ -1,95 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2016 Jan Synáček - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_journal_has_runtime_files"> - - <refentryinfo> - <title>sd_journal_has_runtime_files</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Jan</firstname> - <surname>Synáček</surname> - <email>jan.synacek@gmail.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_journal_has_runtime_files</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_journal_has_runtime_files</refname> - <refname>sd_journal_has_persistent_files</refname> - <refpurpose>Query availability of runtime or persistent journal files.</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-journal.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_journal_has_runtime_files</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_has_persistent_files</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_journal_has_runtime_files()</function> returns a positive value - if runtime journal files (present in /run/systemd/journal/) have been found. - Otherwise returns 0.</para> - - <para><function>sd_journal_has_persistent_files()</function> returns a positive value - if persistent journal files (present in /var/log/journal/) have been found. - Otherwise returns 0.</para> - </refsect1> - - <refsect1> - <title>Return value</title> - <para>Both <function>sd_journal_has_runtime_files()</function> - and <function>sd_journal_has_persistent_files()</function> return -EINVAL - if their argument is NULL. - </para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_journal_next.xml b/man/sd_journal_next.xml deleted file mode 100644 index 115fe26661..0000000000 --- a/man/sd_journal_next.xml +++ /dev/null @@ -1,207 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_journal_next"> - - <refentryinfo> - <title>sd_journal_next</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_journal_next</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_journal_next</refname> - <refname>sd_journal_previous</refname> - <refname>sd_journal_next_skip</refname> - <refname>sd_journal_previous_skip</refname> - <refname>SD_JOURNAL_FOREACH</refname> - <refname>SD_JOURNAL_FOREACH_BACKWARDS</refname> - <refpurpose>Advance or set back the read pointer in the journal</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-journal.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_journal_next</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_previous</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_next_skip</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>uint64_t <parameter>skip</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_previous_skip</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>uint64_t <parameter>skip</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef><function>SD_JOURNAL_FOREACH</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef><function>SD_JOURNAL_FOREACH_BACKWARDS</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_journal_next()</function> advances the read - pointer into the journal by one entry. The only argument taken is - a journal context object as allocated via - <citerefentry><refentrytitle>sd_journal_open</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - After successful invocation the entry may be read with functions - such as - <citerefentry><refentrytitle>sd_journal_get_data</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para>Similarly, <function>sd_journal_previous()</function> sets - the read pointer back one entry.</para> - - <para><function>sd_journal_next_skip()</function> and - <function>sd_journal_previous_skip()</function> advance/set back - the read pointer by multiple entries at once, as specified in the - <varname>skip</varname> parameter.</para> - - <para>The journal is strictly ordered by reception time, and hence - advancing to the next entry guarantees that the entry then - pointing to is later in time than then previous one, or has the - same timestamp.</para> - - <para>Note that - <citerefentry><refentrytitle>sd_journal_get_data</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and related calls will fail unless - <function>sd_journal_next()</function> has been invoked at least - once in order to position the read pointer on a journal - entry.</para> - - <para>Note that the <function>SD_JOURNAL_FOREACH()</function> - macro may be used as a wrapper around - <citerefentry><refentrytitle>sd_journal_seek_head</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and <function>sd_journal_next()</function> in order to make - iterating through the journal easier. See below for an example. - Similarly, <function>SD_JOURNAL_FOREACH_BACKWARDS()</function> may - be used for iterating the journal in reverse order.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>The four calls return the number of entries advanced/set - back on success or a negative errno-style error code. When the end - or beginning of the journal is reached, a number smaller than - requested is returned. More specifically, if - <function>sd_journal_next()</function> or - <function>sd_journal_previous()</function> reach the end/beginning - of the journal they will return 0, instead of 1 when they are - successful. This should be considered an EOF marker.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_journal_next()</function>, - <function>sd_journal_previous()</function>, - <function>sd_journal_next_skip()</function> and - <function>sd_journal_previous_skip()</function> interfaces are - available as a shared library, which can be compiled and linked to - with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>Examples</title> - - <para>Iterating through the journal:</para> - - <programlisting>#include <stdio.h> -#include <string.h> -#include <systemd/sd-journal.h> - -int main(int argc, char *argv[]) { - int r; - sd_journal *j; - r = sd_journal_open(&j, SD_JOURNAL_LOCAL_ONLY); - if (r < 0) { - fprintf(stderr, "Failed to open journal: %s\n", strerror(-r)); - return 1; - } - SD_JOURNAL_FOREACH(j) { - const char *d; - size_t l; - - r = sd_journal_get_data(j, "MESSAGE", (const void **)&d, &l); - if (r < 0) { - fprintf(stderr, "Failed to read message field: %s\n", strerror(-r)); - continue; - } - - printf("%.*s\n", (int) l, d); - } - sd_journal_close(j); - return 0; -}</programlisting> - - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_open</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_data</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_realtime_usec</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_cursor</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_journal_open.xml b/man/sd_journal_open.xml deleted file mode 100644 index 153af2387f..0000000000 --- a/man/sd_journal_open.xml +++ /dev/null @@ -1,228 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_journal_open"> - - <refentryinfo> - <title>sd_journal_open</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_journal_open</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_journal_open</refname> - <refname>sd_journal_open_directory</refname> - <refname>sd_journal_open_directory_fd</refname> - <refname>sd_journal_open_files</refname> - <refname>sd_journal_open_files_fd</refname> - <refname>sd_journal_close</refname> - <refname>sd_journal</refname> - <refname>SD_JOURNAL_LOCAL_ONLY</refname> - <refname>SD_JOURNAL_RUNTIME_ONLY</refname> - <refname>SD_JOURNAL_SYSTEM</refname> - <refname>SD_JOURNAL_CURRENT_USER</refname> - <refname>SD_JOURNAL_OS_ROOT</refname> - <refpurpose>Open the system journal for reading</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-journal.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_journal_open</function></funcdef> - <paramdef>sd_journal **<parameter>ret</parameter></paramdef> - <paramdef>int <parameter>flags</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_open_directory</function></funcdef> - <paramdef>sd_journal **<parameter>ret</parameter></paramdef> - <paramdef>const char *<parameter>path</parameter></paramdef> - <paramdef>int <parameter>flags</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_open_directory_fd</function></funcdef> - <paramdef>sd_journal **<parameter>ret</parameter></paramdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>int <parameter>flags</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_open_files</function></funcdef> - <paramdef>sd_journal **<parameter>ret</parameter></paramdef> - <paramdef>const char **<parameter>paths</parameter></paramdef> - <paramdef>int <parameter>flags</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_open_files_fd</function></funcdef> - <paramdef>sd_journal **<parameter>ret</parameter></paramdef> - <paramdef>int <parameter>fds[]</parameter></paramdef> - <paramdef>unsigned <parameter>n_fds</parameter></paramdef> - <paramdef>int <parameter>flags</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>void <function>sd_journal_close</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_journal_open()</function> opens the log journal - for reading. It will find all journal files automatically and - interleave them automatically when reading. As first argument it - takes a pointer to a <varname>sd_journal</varname> pointer, which, - on success, will contain a journal context object. The second - argument is a flags field, which may consist of the following - flags ORed together: <constant>SD_JOURNAL_LOCAL_ONLY</constant> - makes sure only journal files generated on the local machine will - be opened. <constant>SD_JOURNAL_RUNTIME_ONLY</constant> makes sure - only volatile journal files will be opened, excluding those which - are stored on persistent storage. - <constant>SD_JOURNAL_SYSTEM</constant> will cause journal files of - system services and the kernel (in opposition to user session - processes) to be opened. - <constant>SD_JOURNAL_CURRENT_USER</constant> will cause journal - files of the current user to be opened. If neither - <constant>SD_JOURNAL_SYSTEM</constant> nor - <constant>SD_JOURNAL_CURRENT_USER</constant> are specified, all - journal file types will be opened.</para> - - <para><function>sd_journal_open_directory()</function> is similar to <function>sd_journal_open()</function> but - takes an absolute directory path as argument. All journal files in this directory will be opened and interleaved - automatically. This call also takes a flags argument. The only flags parameter accepted by this call is - <constant>SD_JOURNAL_OS_ROOT</constant>. If specified, the journal files are searched below the usual - <filename>/var/log/journal</filename> and <filename>/run/log/journal</filename> relative to the specified path, - instead of directly beneath it.</para> - - <para><function>sd_journal_open_directory_fd()</function> is similar to - <function>sd_journal_open_directory()</function>, but takes a file descriptor referencing a directory in the file - system instead of an absolute file system path.</para> - - <para><function>sd_journal_open_files()</function> is similar to <function>sd_journal_open()</function> but takes a - <constant>NULL</constant>-terminated list of file paths to open. All files will be opened and interleaved - automatically. This call also takes a flags argument, but it must be passed as 0 as no flags are currently - understood for this call. Please note that in the case of a live journal, this function is only useful for - debugging, because individual journal files can be rotated at any moment, and the opening of specific files is - inherently racy.</para> - - <para><function>sd_journal_open_files_fd()</function> is similar to <function>sd_journal_open_files()</function> - but takes an array of open file descriptors that must reference journal files, instead of an array of file system - paths. Pass the array of file descriptors as second argument, and the number of array entries in the third. The - flags parameter must be passed as 0.</para> - - <para><varname>sd_journal</varname> objects cannot be used in the - child after a fork. Functions which take a journal object as an - argument (<function>sd_journal_next()</function> and others) will - return <constant>-ECHILD</constant> after a fork. - </para> - - <para><function>sd_journal_close()</function> will close the - journal context allocated with - <function>sd_journal_open()</function> or - <function>sd_journal_open_directory()</function> and free its - resources.</para> - - <para>When opening the journal only journal files accessible to - the calling user will be opened. If journal files are not - accessible to the caller, this will be silently ignored.</para> - - <para>See - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for an example of how to iterate through the journal after opening - it with <function>sd_journal_open()</function>.</para> - - <para>A journal context object returned by - <function>sd_journal_open()</function> references a specific - journal entry as <emphasis>current</emphasis> entry, similar to a - file seek index in a classic file system file, but without - absolute positions. It may be altered with - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>sd_journal_seek_head</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and related calls. The current entry position may be exported in - <emphasis>cursor</emphasis> strings, as accessible via - <citerefentry><refentrytitle>sd_journal_get_cursor</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - Cursor strings may be used to globally identify a specific journal - entry in a stable way and then later to seek to it (or if the - specific entry is not available locally, to its closest entry in - time) - <citerefentry><refentrytitle>sd_journal_seek_cursor</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para>Notification of journal changes is available via - <function>sd_journal_get_fd()</function> and related calls.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>The <function>sd_journal_open()</function>, - <function>sd_journal_open_directory()</function>, and - <function>sd_journal_open_files()</function> calls return 0 on - success or a negative errno-style error code. - <function>sd_journal_close()</function> returns nothing.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_journal_open()</function>, - <function>sd_journal_open_directory()</function> and - <function>sd_journal_close()</function> interfaces are available - as a shared library, which can be compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_data</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-machined</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_journal_print.xml b/man/sd_journal_print.xml deleted file mode 100644 index 17fdc9c1f2..0000000000 --- a/man/sd_journal_print.xml +++ /dev/null @@ -1,260 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_journal_print"> - - <refentryinfo> - <title>sd_journal_print</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_journal_print</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_journal_print</refname> - <refname>sd_journal_printv</refname> - <refname>sd_journal_send</refname> - <refname>sd_journal_sendv</refname> - <refname>sd_journal_perror</refname> - <refname>SD_JOURNAL_SUPPRESS_LOCATION</refname> - <refpurpose>Submit log entries to the journal</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-journal.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_journal_print</function></funcdef> - <paramdef>int <parameter>priority</parameter></paramdef> - <paramdef>const char *<parameter>format</parameter></paramdef> - <paramdef>...</paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_printv</function></funcdef> - <paramdef>int <parameter>priority</parameter></paramdef> - <paramdef>const char *<parameter>format</parameter></paramdef> - <paramdef>va_list <parameter>ap</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_send</function></funcdef> - <paramdef>const char *<parameter>format</parameter></paramdef> - <paramdef>...</paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_sendv</function></funcdef> - <paramdef>const struct iovec *<parameter>iov</parameter></paramdef> - <paramdef>int <parameter>n</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_perror</function></funcdef> - <paramdef>const char *<parameter>message</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_journal_print()</function> may be used to - submit simple, plain text log entries to the system journal. The - first argument is a priority value. This is followed by a format - string and its parameters, similar to - <citerefentry project='man-pages'><refentrytitle>printf</refentrytitle><manvolnum>3</manvolnum></citerefentry> - or - <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - The priority value is one of - <constant>LOG_EMERG</constant>, - <constant>LOG_ALERT</constant>, - <constant>LOG_CRIT</constant>, - <constant>LOG_ERR</constant>, - <constant>LOG_WARNING</constant>, - <constant>LOG_NOTICE</constant>, - <constant>LOG_INFO</constant>, - <constant>LOG_DEBUG</constant>, as defined in - <filename>syslog.h</filename>, see - <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for details. It is recommended to use this call to submit log - messages in the application locale or system locale and in UTF-8 - format, but no such restrictions are enforced.</para> - - <para><function>sd_journal_printv()</function> is similar to - <function>sd_journal_print()</function> but takes a variable - argument list encapsulated in an object of type - <varname>va_list</varname> (see - <citerefentry project='man-pages'><refentrytitle>stdarg</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for more information) instead of the format string. It is - otherwise equivalent in behavior.</para> - - <para><function>sd_journal_send()</function> may be used to submit - structured log entries to the system journal. It takes a series of - format strings, each immediately followed by their associated - parameters, terminated by <constant>NULL</constant>. The strings - passed should be of the format <literal>VARIABLE=value</literal>. - The variable name must be in uppercase and consist only of - characters, numbers and underscores, and may not begin with an - underscore. (All assignments that do not follow this syntax will - be ignored.) The value can be of any size and format. It is highly - recommended to submit text strings formatted in the UTF-8 - character encoding only, and submit binary fields only when - formatting in UTF-8 strings is not sensible. A number of - well-known fields are defined, see - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details, but additional application defined fields may be - used. A variable may be assigned more than one value per - entry.</para> - - <para><function>sd_journal_sendv()</function> is similar to - <function>sd_journal_send()</function> but takes an array of - <varname>struct iovec</varname> (as defined in - <filename>uio.h</filename>, see - <citerefentry project='man-pages'><refentrytitle>readv</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for details) instead of the format string. Each structure should - reference one field of the entry to submit. The second argument - specifies the number of structures in the array. - <function>sd_journal_sendv()</function> is particularly useful to - submit binary objects to the journal where that is - necessary.</para> - - <para><function>sd_journal_perror()</function> is a similar to - <citerefentry project='die-net'><refentrytitle>perror</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and writes a message to the journal that consists of the passed - string, suffixed with ": " and a human-readable representation of - the current error code stored in - <citerefentry project='man-pages'><refentrytitle>errno</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - If the message string is passed as <constant>NULL</constant> or - empty string, only the error string representation will be - written, prefixed with nothing. An additional journal field ERRNO= - is included in the entry containing the numeric error code - formatted as decimal string. The log priority used is - <constant>LOG_ERR</constant> (3).</para> - - <para>Note that <function>sd_journal_send()</function> is a - wrapper around <function>sd_journal_sendv()</function> to make it - easier to use when only text strings shall be submitted. Also, the - following two calls are mostly equivalent:</para> - - <programlisting>sd_journal_print(LOG_INFO, "Hello World, this is PID %lu!", (unsigned long) getpid()); - -sd_journal_send("MESSAGE=Hello World, this is PID %lu!", (unsigned long) getpid(), - "PRIORITY=%i", LOG_INFO, - NULL);</programlisting> - - <para>Note that these calls implicitly add fields for the source - file, function name and code line where invoked. This is - implemented with macros. If this is not desired, it can be turned - off by defining SD_JOURNAL_SUPPRESS_LOCATION before including - <filename>sd-journal.h</filename>.</para> - - <para><citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and <function>sd_journal_print()</function> may - largely be used interchangeably - functionality-wise. However, note that log messages - logged via the former take a different path to the - journal server than the later, and hence global - chronological ordering between the two streams cannot - be guaranteed. Using - <function>sd_journal_print()</function> has the - benefit of logging source code line, filenames, and - functions as metadata along all entries, and - guaranteeing chronological ordering with structured - log entries that are generated via - <function>sd_journal_send()</function>. Using - <function>syslog()</function> has the benefit of being - more portable.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>The four calls return 0 on success or a negative errno-style - error code. The - <citerefentry project='man-pages'><refentrytitle>errno</refentrytitle><manvolnum>3</manvolnum></citerefentry> - variable itself is not altered.</para> - - <para>If - <citerefentry><refentrytitle>systemd-journald</refentrytitle><manvolnum>8</manvolnum></citerefentry> - is not running (the socket is not present), those functions do - nothing, and also return 0.</para> - </refsect1> - - <refsect1> - <title>Async signal safety</title> - <para><function>sd_journal_sendv()</function> is "async signal - safe" in the meaning of - <citerefentry project='man-pages'><refentrytitle>signal</refentrytitle><manvolnum>7</manvolnum></citerefentry>. - </para> - - <para><function>sd_journal_print</function>, - <function>sd_journal_printv</function>, - <function>sd_journal_send</function>, and - <function>sd_journal_perror</function> are - not async signal safe.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_journal_print()</function>, - <function>sd_journal_printv()</function>, - <function>sd_journal_send()</function> and - <function>sd_journal_sendv()</function> interfaces are available - as a shared library, which can be compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_stream_fd</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>perror</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>errno</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>signal</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_journal_query_unique.xml b/man/sd_journal_query_unique.xml deleted file mode 100644 index dbff55c105..0000000000 --- a/man/sd_journal_query_unique.xml +++ /dev/null @@ -1,212 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_journal_query_unique"> - - <refentryinfo> - <title>sd_journal_query_unique</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_journal_query_unique</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_journal_query_unique</refname> - <refname>sd_journal_enumerate_unique</refname> - <refname>sd_journal_restart_unique</refname> - <refname>SD_JOURNAL_FOREACH_UNIQUE</refname> - <refpurpose>Read unique data fields from the journal</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-journal.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_journal_query_unique</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>const char *<parameter>field</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_enumerate_unique</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>const void **<parameter>data</parameter></paramdef> - <paramdef>size_t *<parameter>length</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>void <function>sd_journal_restart_unique</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef><function>SD_JOURNAL_FOREACH_UNIQUE</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>const void *<parameter>data</parameter></paramdef> - <paramdef>size_t <parameter>length</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_journal_query_unique()</function> queries the - journal for all unique values the specified field can take. It - takes two arguments: the journal to query and the field name to - look for. Well-known field names are listed on - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>. - Field names must be specified without a trailing '='. After this - function has been executed successfully the field values may be - queried using <function>sd_journal_enumerate_unique()</function>. - Invoking this call a second time will change the field name being - queried and reset the enumeration index to the first field value - that matches.</para> - - <para><function>sd_journal_enumerate_unique()</function> may be - used to iterate through all data fields which match the previously - selected field name as set with - <function>sd_journal_query_unique()</function>. On each invocation - the next field data matching the field name is returned. The order - of the returned data fields is not defined. It takes three - arguments: the journal context object, plus a pair of pointers to - pointer/size variables where the data object and its size shall be - stored in. The returned data is in a read-only memory map and is - only valid until the next invocation of - <function>sd_journal_enumerate_unique()</function>. Note that the - data returned will be prefixed with the field name and '='. Note - that this call is subject to the data field size threshold as - controlled by - <function>sd_journal_set_data_threshold()</function>.</para> - - <para><function>sd_journal_restart_unique()</function> resets the - data enumeration index to the beginning of the list. The next - invocation of <function>sd_journal_enumerate_unique()</function> - will return the first field data matching the field name - again.</para> - - <para>Note that the - <function>SD_JOURNAL_FOREACH_UNIQUE()</function> macro may be used - as a handy wrapper around - <function>sd_journal_restart_unique()</function> and - <function>sd_journal_enumerate_unique()</function>.</para> - - <para>Note that these functions currently are not influenced by - matches set with <function>sd_journal_add_match()</function> but - this might change in a later version of this software.</para> - - <para>To enumerate all field names currently in use (and thus all suitable field parameters for - <function>sd_journal_query_unique()</function>), use the - <citerefentry><refentrytitle>sd_journal_enumerate_fields</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para><function>sd_journal_query_unique()</function> returns 0 on - success or a negative errno-style error code. - <function>sd_journal_enumerate_unique()</function> returns a - positive integer if the next field data has been read, 0 when no - more fields are known, or a negative errno-style error code. - <function>sd_journal_restart_unique()</function> returns - nothing.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_journal_query_unique()</function>, - <function>sd_journal_enumerate_unique()</function> and - <function>sd_journal_restart_unique()</function> interfaces are - available as a shared library, which can be compiled and linked to - with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>Examples</title> - - <para>Use the <function>SD_JOURNAL_FOREACH_UNIQUE</function> macro - to iterate through all values a field of the journal can take. The - following example lists all unit names referenced in the - journal:</para> - - <programlisting>#include <stdio.h> -#include <string.h> -#include <systemd/sd-journal.h> - -int main(int argc, char *argv[]) { - sd_journal *j; - const void *d; - size_t l; - int r; - - r = sd_journal_open(&j, SD_JOURNAL_LOCAL_ONLY); - if (r < 0) { - fprintf(stderr, "Failed to open journal: %s\n", strerror(-r)); - return 1; - } - r = sd_journal_query_unique(j, "_SYSTEMD_UNIT"); - if (r < 0) { - fprintf(stderr, "Failed to query journal: %s\n", strerror(-r)); - return 1; - } - SD_JOURNAL_FOREACH_UNIQUE(j, d, l) - printf("%.*s\n", (int) l, (const char*) d); - sd_journal_close(j); - return 0; -}</programlisting> - - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_open</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_enumerate_fields</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_data</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_add_match</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_journal_seek_head.xml b/man/sd_journal_seek_head.xml deleted file mode 100644 index d74c2d5bbc..0000000000 --- a/man/sd_journal_seek_head.xml +++ /dev/null @@ -1,172 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_journal_seek_head"> - - <refentryinfo> - <title>sd_journal_seek_head</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_journal_seek_head</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_journal_seek_head</refname> - <refname>sd_journal_seek_tail</refname> - <refname>sd_journal_seek_monotonic_usec</refname> - <refname>sd_journal_seek_realtime_usec</refname> - <refname>sd_journal_seek_cursor</refname> - <refpurpose>Seek to a position in the - journal</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-journal.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_journal_seek_head</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_seek_tail</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_seek_monotonic_usec</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>sd_id128_t <parameter>boot_id</parameter></paramdef> - <paramdef>uint64_t <parameter>usec</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_seek_realtime_usec</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>uint64_t <parameter>usec</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_journal_seek_cursor</function></funcdef> - <paramdef>sd_journal *<parameter>j</parameter></paramdef> - <paramdef>const char *<parameter>cursor</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_journal_seek_head()</function> seeks to the - beginning of the journal, i.e. the oldest available entry.</para> - - <para>Similarly, <function>sd_journal_seek_tail()</function> may - be used to seek to the end of the journal, i.e. the most recent - available entry.</para> - - <para><function>sd_journal_seek_monotonic_usec()</function> seeks - to the entry with the specified monotonic timestamp, i.e. - <constant>CLOCK_MONOTONIC</constant>. Since monotonic time - restarts on every reboot a boot ID needs to be specified as - well.</para> - - <para><function>sd_journal_seek_realtime_usec()</function> seeks - to the entry with the specified realtime (wallclock) timestamp, - i.e. <constant>CLOCK_REALTIME</constant>. Note that the realtime - clock is not necessarily monotonic. If a realtime timestamp is - ambiguous, it is not defined which position is sought to.</para> - - <para><function>sd_journal_seek_cursor()</function> seeks to the - entry located at the specified cursor string. For details on - cursors, see - <citerefentry><refentrytitle>sd_journal_get_cursor</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - If no entry matching the specified cursor is found the call will - seek to the next closest entry (in terms of time) instead. To - verify whether the newly selected entry actually matches the - cursor, use - <citerefentry><refentrytitle>sd_journal_test_cursor</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - - <para>Note that these calls do not actually make any entry the new - current entry, this needs to be done in a separate step with a - subsequent - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry> - invocation (or a similar call). Only then, entry data may be - retrieved via - <citerefentry><refentrytitle>sd_journal_get_data</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - If no entry exists that matches exactly the specified seek - address, the next closest is sought to. If - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry> - is used, the closest following entry will be sought to, if - <citerefentry><refentrytitle>sd_journal_previous</refentrytitle><manvolnum>3</manvolnum></citerefentry> - is used the closest preceding entry is sought to.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>The functions return 0 on success or a negative errno-style - error code.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_journal_seek_head()</function>, - <function>sd_journal_seek_tail()</function>, - <function>sd_journal_seek_monotonic_usec()</function>, - <function>sd_journal_seek_realtime_usec()</function>, - and <function>sd_journal_seek_cursor()</function> - interfaces are available as a shared library, which can - be compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_open</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_next</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_data</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_cursor</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_get_realtime_usec</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_journal_stream_fd.xml b/man/sd_journal_stream_fd.xml deleted file mode 100644 index 2ea7731b48..0000000000 --- a/man/sd_journal_stream_fd.xml +++ /dev/null @@ -1,163 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_journal_stream_fd"> - - <refentryinfo> - <title>sd_journal_stream_fd</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_journal_stream_fd</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_journal_stream_fd</refname> - <refpurpose>Create log stream file descriptor to the journal</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-journal.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_journal_stream_fd</function></funcdef> - <paramdef>const char *<parameter>identifier</parameter></paramdef> - <paramdef>int <parameter>priority</parameter></paramdef> - <paramdef>int <parameter>level_prefix</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_journal_stream_fd()</function> may be used to - create a log stream file descriptor. Log messages written to this - file descriptor as simple newline-separated text strings are - written to the journal. This file descriptor can be used - internally by applications or be made standard output or standard - error of other processes executed.</para> - - <para><function>sd_journal_stream_fd()</function> takes a short - program identifier string as first argument, which will be written - to the journal as _SYSLOG_IDENTIFIER= field for each log entry - (see - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for more information). The second argument shall be the default - priority level for all messages. The priority level is one of - <constant>LOG_EMERG</constant>, <constant>LOG_ALERT</constant>, - <constant>LOG_CRIT</constant>, <constant>LOG_ERR</constant>, - <constant>LOG_WARNING</constant>, <constant>LOG_NOTICE</constant>, - <constant>LOG_INFO</constant>, <constant>LOG_DEBUG</constant>, as - defined in <filename>syslog.h</filename>, see - <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for details. The third argument is a boolean: if true kernel-style - log level prefixes (such as <constant>SD_WARNING</constant>) are - interpreted, see - <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for more information.</para> - - <para>It is recommended that applications log UTF-8 messages only - with this API, but this is not enforced.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>The call returns a valid write-only file descriptor on - success or a negative errno-style error code.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_journal_stream_fd()</function> interface is - available as a shared library, which can be compiled and linked to - with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>Examples</title> - - <para>Creating a log stream suitable for - <citerefentry project='man-pages'><refentrytitle>fprintf</refentrytitle><manvolnum>3</manvolnum></citerefentry>:</para> - - <programlisting>#include <syslog.h> -#include <stdio.h> -#include <string.h> -#include <unistd.h> -#include <systemd/sd-journal.h> -#include <systemd/sd-daemon.h> - -int main(int argc, char *argv[]) { - int fd; - FILE *log; - fd = sd_journal_stream_fd("test", LOG_INFO, 1); - if (fd < 0) { - fprintf(stderr, "Failed to create stream fd: %s\n", strerror(-fd)); - return 1; - } - log = fdopen(fd, "w"); - if (!log) { - fprintf(stderr, "Failed to create file object: %m\n"); - close(fd); - return 1; - } - fprintf(log, "Hello World!\n"); - fprintf(log, SD_WARNING "This is a warning!\n"); - fclose(log); - return 0; -}</programlisting> - - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_print</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>fprintf</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_listen_fds.xml b/man/sd_listen_fds.xml deleted file mode 100644 index 93bf8d853f..0000000000 --- a/man/sd_listen_fds.xml +++ /dev/null @@ -1,257 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_listen_fds" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_listen_fds</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_listen_fds</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_listen_fds</refname> - <refname>sd_listen_fds_with_names</refname> - <refname>SD_LISTEN_FDS_START</refname> - <refpurpose>Check for file descriptors passed by the system manager</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-daemon.h></funcsynopsisinfo> - - <funcsynopsisinfo>#define SD_LISTEN_FDS_START 3</funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_listen_fds</function></funcdef> - <paramdef>int <parameter>unset_environment</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_listen_fds_with_names</function></funcdef> - <paramdef>int <parameter>unset_environment</parameter></paramdef> - <paramdef>char*** <parameter>names</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_listen_fds()</function> may be invoked by a - daemon to check for file descriptors passed by the service manager as - part of the socket-based activation logic. It returns the number - of received file descriptors. If no file descriptors have been - received, zero is returned. The first file descriptor may be found - at file descriptor number 3 - (i.e. <constant>SD_LISTEN_FDS_START</constant>), the remaining - descriptors follow at 4, 5, 6, ..., if any.</para> - - <para>If a daemon receives more than one file descriptor, they - will be passed in the same order as configured in the systemd - socket unit file (see - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details). Nonetheless, it is recommended to verify the correct - socket types before using them. To simplify this checking, the - functions - <citerefentry><refentrytitle>sd_is_fifo</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_is_socket</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_is_socket_inet</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_is_socket_unix</refentrytitle><manvolnum>3</manvolnum></citerefentry> - are provided. In order to maximize flexibility, it is recommended - to make these checks as loose as possible without allowing - incorrect setups. i.e. often, the actual port number a socket is - bound to matters little for the service to work, hence it should - not be verified. On the other hand, whether a socket is a datagram - or stream socket matters a lot for the most common program logics - and should be checked.</para> - - <para>This function call will set the FD_CLOEXEC flag for all - passed file descriptors to avoid further inheritance to children - of the calling process.</para> - - <para>If multiple socket units activate the same service, the order - of the file descriptors passed to its main process is undefined. - If additional file descriptors have been passed to the service - manager using - <citerefentry><refentrytitle>sd_pid_notify_with_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>'s - <literal>FDSTORE=1</literal> messages, these file descriptors are - passed last, in arbitrary order, and with duplicates - removed.</para> - - <para>If the <parameter>unset_environment</parameter> parameter is - non-zero, <function>sd_listen_fds()</function> will unset the - <varname>$LISTEN_FDS</varname>, <varname>$LISTEN_PID</varname> and - <varname>$LISTEN_FDNAMES</varname> environment variables before - returning (regardless of whether the function call itself - succeeded or not). Further calls to - <function>sd_listen_fds()</function> will then return zero, but the - variables are no longer inherited by child processes.</para> - - <para><function>sd_listen_fds_with_names()</function> is like - <function>sd_listen_fds()</function>, but optionally also returns - an array of strings with identification names for the passed file - descriptors, if that is available and the - <parameter>names</parameter> parameter is non-NULL. This - information is read from the <varname>$LISTEN_FDNAMES</varname> - variable, which may contain a colon-separated list of names. For - socket-activated services, these names may be configured with the - <varname>FileDescriptorName=</varname> setting in socket unit - files, see - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. For file descriptors pushed into the file descriptor - store (see above), the name is set via the - <varname>FDNAME=</varname> field transmitted via - <function>sd_pid_notify_with_fds()</function>. The primary usecase - for these names are services which accept a variety of file - descriptors which are not recognizable with functions like - <function>sd_is_socket()</function> alone, and thus require - identification via a name. It is recommended to rely on named file - descriptors only if identification via - <function>sd_is_socket()</function> and related calls is not - sufficient. Note that the names used are not unique in any - way. The returned array of strings has as many entries as file - descriptors have been received, plus a final NULL pointer - terminating the array. The caller needs to free the array itself - and each of its elements with libc's <function>free()</function> - call after use. If the <parameter>names</parameter> parameter is - NULL, the call is entirely equivalent to - <function>sd_listen_fds()</function>.</para> - - <para>Under specific conditions, the following automatic file - descriptor names are returned: - - <table> - <title> - <command>Special names</command> - </title> - - <tgroup cols='2'> - <thead> - <row> - <entry>Name</entry> - <entry>Description</entry> - </row> - </thead> - <tbody> - <row> - <entry><literal>unknown</literal></entry> - <entry>The process received no name for the specific file descriptor from the service manager.</entry> - </row> - - <row> - <entry><literal>stored</literal></entry> - <entry>The file descriptor originates in the service manager's per-service file descriptor store, and the <varname>FDNAME=</varname> field was absent when the file descriptor was submitted to the service manager.</entry> - </row> - - <row> - <entry><literal>connection</literal></entry> - <entry>The service was activated in per-connection style using <varname>Accept=yes</varname> in the socket unit file, and the file descriptor is the connection socket.</entry> - </row> - </tbody> - </tgroup> - </table> - </para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On failure, these calls returns a negative errno-style error - code. If - <varname>$LISTEN_FDS</varname>/<varname>$LISTEN_PID</varname> was - not set or was not correctly set for this daemon and hence no file - descriptors were received, 0 is returned. Otherwise, the number of - file descriptors passed is returned. The application may find them - starting with file descriptor SD_LISTEN_FDS_START, i.e. file - descriptor 3.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <xi:include href="libsystemd-pkgconfig.xml" xpointer="pkgconfig-text"/> - - <para>Internally, <function>sd_listen_fds()</function> checks - whether the <varname>$LISTEN_PID</varname> environment variable - equals the daemon PID. If not, it returns immediately. Otherwise, - it parses the number passed in the <varname>$LISTEN_FDS</varname> - environment variable, then sets the FD_CLOEXEC flag for the parsed - number of file descriptors starting from SD_LISTEN_FDS_START. - Finally, it returns the parsed - number. <function>sd_listen_fds_with_names()</function> does the - same but also parses <varname>$LISTEN_FDNAMES</varname> if - set.</para> - </refsect1> - - <refsect1> - <title>Environment</title> - - <variablelist class='environment-variables'> - <varlistentry> - <term><varname>$LISTEN_PID</varname></term> - <term><varname>$LISTEN_FDS</varname></term> - <term><varname>$LISTEN_FDNAMES</varname></term> - - <listitem><para>Set by the service manager for supervised - processes that use socket-based activation. This environment - variable specifies the data - <function>sd_listen_fds()</function> and - <function>sd_listen_fds_with_names()</function> parses. See - above for details.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_is_fifo</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_is_socket</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_is_socket_inet</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_is_socket_unix</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_pid_notify_with_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_login_monitor_new.xml b/man/sd_login_monitor_new.xml deleted file mode 100644 index 5625ab9207..0000000000 --- a/man/sd_login_monitor_new.xml +++ /dev/null @@ -1,287 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_login_monitor_new" conditional='HAVE_PAM'> - - <refentryinfo> - <title>sd_login_monitor_new</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_login_monitor_new</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_login_monitor_new</refname> - <refname>sd_login_monitor_unref</refname> - <refname>sd_login_monitor_unrefp</refname> - <refname>sd_login_monitor_flush</refname> - <refname>sd_login_monitor_get_fd</refname> - <refname>sd_login_monitor_get_events</refname> - <refname>sd_login_monitor_get_timeout</refname> - <refname>sd_login_monitor</refname> - <refpurpose>Monitor login sessions, seats, users and virtual machines/containers</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-login.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_login_monitor_new</function></funcdef> - <paramdef>const char *<parameter>category</parameter></paramdef> - <paramdef>sd_login_monitor **<parameter>ret</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>sd_login_monitor *<function>sd_login_monitor_unref</function></funcdef> - <paramdef>sd_login_monitor *<parameter>m</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>void <function>sd_login_monitor_unrefp</function></funcdef> - <paramdef>sd_login_monitor **<parameter>m</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_login_monitor_flush</function></funcdef> - <paramdef>sd_login_monitor *<parameter>m</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_login_monitor_get_fd</function></funcdef> - <paramdef>sd_login_monitor *<parameter>m</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_login_monitor_get_events</function></funcdef> - <paramdef>sd_login_monitor *<parameter>m</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_login_monitor_get_timeout</function></funcdef> - <paramdef>sd_login_monitor *<parameter>m</parameter></paramdef> - <paramdef>uint64_t *<parameter>timeout_usec</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_login_monitor_new()</function> may be used to - monitor login sessions, users, seats, and virtual - machines/containers. Via a monitor object a file descriptor can be - integrated into an application defined event loop which is woken - up each time a user logs in, logs out or a seat is added or - removed, or a session, user, seat or virtual machine/container - changes state otherwise. The first parameter takes a string which - can be <literal>seat</literal> (to get only notifications about - seats being added, removed or changed), <literal>session</literal> - (to get only notifications about sessions being created or removed - or changed), <literal>uid</literal> (to get only notifications - when a user changes state in respect to logins) or - <literal>machine</literal> (to get only notifications when a - virtual machine or container is started or stopped). If - notifications shall be generated in all these conditions, - <constant>NULL</constant> may be passed. Note that in the future - additional categories may be defined. The second parameter returns - a monitor object and needs to be freed with the - <function>sd_login_monitor_unref()</function> call after - use.</para> - - <para><function>sd_login_monitor_unref()</function> may be used to - destroy a monitor object. Note that this will invalidate any file - descriptor returned by - <function>sd_login_monitor_get_fd()</function>.</para> - - <para><function>sd_login_monitor_unrefp()</function> is similar to - <function>sd_login_monitor_unref()</function> but takes a pointer - to a pointer to an <type>sd_login_monitor</type> object. This call - is useful in conjunction with GCC's and LLVM's <ulink - url="https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html">Clean-up - Variable Attribute</ulink>. Note that this function is defined as - inline function. Use a declaration like the following, in order to - allocate a login monitor object that is freed automatically as the - code block is left:</para> - - <programlisting>{ - __attribute__((cleanup(sd_login_monitor_unrefp)) sd_login_monitor *m = NULL; - int r; - … - r = sd_login_monitor_default(&m); - if (r < 0) - fprintf(stderr, "Failed to allocate login monitor object: %s\n", strerror(-r)); - … -}</programlisting> - - <para><function>sd_login_monitor_flush()</function> may be used to - reset the wakeup state of the monitor object. Whenever an event - causes the monitor to wake up the event loop via the file - descriptor this function needs to be called to reset the wake-up - state. If this call is not invoked, the file descriptor will - immediately wake up the event loop again.</para> - - <para><function>sd_login_monitor_unref()</function> and - <function>sd_login_monitor_unrefp()</function> execute no - operation if the passed in monitor object is - <constant>NULL</constant>.</para> - - <para><function>sd_login_monitor_get_fd()</function> may be used - to retrieve the file descriptor of the monitor object that may be - integrated in an application defined event loop, based around - <citerefentry><refentrytitle>poll</refentrytitle><manvolnum>2</manvolnum></citerefentry> - or a similar interface. The application should include the - returned file descriptor as wake-up source for the events mask - returned by <function>sd_login_monitor_get_events()</function>. It - should pass a timeout value as returned by - <function>sd_login_monitor_get_timeout()</function>. Whenever a - wake-up is triggered the file descriptor needs to be reset via - <function>sd_login_monitor_flush()</function>. An application - needs to reread the login state with a function like - <citerefentry><refentrytitle>sd_get_seats</refentrytitle><manvolnum>3</manvolnum></citerefentry> - or similar to determine what changed.</para> - - <para><function>sd_login_monitor_get_events()</function> will - return the <function>poll()</function> mask to wait for. This - function will return a combination of <constant>POLLIN</constant>, - <constant>POLLOUT</constant> and similar to fill into the - <literal>.events</literal> field of <varname>struct - pollfd</varname>.</para> - - <para><function>sd_login_monitor_get_timeout()</function> will - return a timeout value for usage in <function>poll()</function>. - This returns a value in microseconds since the epoch of - <constant>CLOCK_MONOTONIC</constant> for timing out - <function>poll()</function> in <varname>timeout_usec</varname>. - See - <citerefentry><refentrytitle>clock_gettime</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details about <constant>CLOCK_MONOTONIC</constant>. If there - is no timeout to wait for this will fill in <constant>(uint64_t) - -1</constant> instead. Note that <function>poll()</function> takes - a relative timeout in milliseconds rather than an absolute timeout - in microseconds. To convert the absolute 'µs' timeout into - relative 'ms', use code like the following:</para> - - <programlisting>uint64_t t; -int msec; -sd_login_monitor_get_timeout(m, &t); -if (t == (uint64_t) -1) - msec = -1; -else { - struct timespec ts; - uint64_t n; - clock_getttime(CLOCK_MONOTONIC, &ts); - n = (uint64_t) ts.tv_sec * 1000000 + ts.tv_nsec / 1000; - msec = t > n ? (int) ((t - n + 999) / 1000) : 0; -}</programlisting> - - <para>The code above does not do any error checking for brevity's - sake. The calculated <varname>msec</varname> integer can be passed - directly as <function>poll()</function>'s timeout - parameter.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, - <function>sd_login_monitor_new()</function>, - <function>sd_login_monitor_flush()</function> and - <function>sd_login_monitor_get_timeout()</function> - return 0 or a positive integer. On success, - <function>sd_login_monitor_get_fd()</function> returns - a Unix file descriptor. On success, - <function>sd_login_monitor_get_events()</function> - returns a combination of <constant>POLLIN</constant>, - <constant>POLLOUT</constant> and suchlike. On failure, - these calls return a negative errno-style error - code.</para> - - <para><function>sd_login_monitor_unref()</function> - always returns <constant>NULL</constant>.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>An input parameter was invalid (out of range, - or NULL, where that is not accepted). The specified category to - watch is not known.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Memory allocation failed.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_login_monitor_new()</function>, - <function>sd_login_monitor_unref()</function>, - <function>sd_login_monitor_flush()</function>, - <function>sd_login_monitor_get_fd()</function>, - <function>sd_login_monitor_get_events()</function> and - <function>sd_login_monitor_get_timeout()</function> - interfaces are available as a shared library, which can be - compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-login</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_get_seats</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>poll</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - <citerefentry><refentrytitle>clock_gettime</refentrytitle><manvolnum>2</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_machine_get_class.xml b/man/sd_machine_get_class.xml deleted file mode 100644 index ef604139da..0000000000 --- a/man/sd_machine_get_class.xml +++ /dev/null @@ -1,152 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_machine_get_class"> - - <refentryinfo> - <title>sd_machine_get_class</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_machine_get_class</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_machine_get_class</refname> - <refname>sd_machine_get_ifindices</refname> - <refpurpose>Determine the class and network interface indices of a - locally running virtual machine or container.</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-login.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_machine_get_class</function></funcdef> - <paramdef>const char* <parameter>machine</parameter></paramdef> - <paramdef>char **<parameter>class</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_machine_get_ifindices</function></funcdef> - <paramdef>const char* <parameter>machine</parameter></paramdef> - <paramdef>int **<parameter>ifindices</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_machine_get_class()</function> may be used to - determine the class of a locally running virtual machine or - container that is registered with - <citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - The string returned is either <literal>vm</literal> or - <literal>container</literal>. The returned string needs to be - freed with the libc <citerefentry - project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use.</para> - - <para><function>sd_machine_get_ifindices()</function> may be used - to determine the numeric indices of the network interfaces on the - host that are pointing towards the specified locally running - virtual machine or container that is registered with - <citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - The returned array needs to be freed with the libc <citerefentry - project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, these calls return 0 or a positive integer. On - failure, these calls return a negative errno-style error - code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - - <varlistentry> - <term><constant>-ENXIO</constant></term> - - <listitem><para>The specified machine does not exist or is currently not running.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>An input parameter was invalid (out of range, - or NULL, where that is not accepted).</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Memory allocation failed.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_machine_get_class()</function> and - <function>sd_machine_get_ifindices()</function> interfaces are - available as a shared library, which can be compiled and linked to - with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-login</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_pid_get_machine_name</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_notify.xml b/man/sd_notify.xml deleted file mode 100644 index bd6cfdcd29..0000000000 --- a/man/sd_notify.xml +++ /dev/null @@ -1,399 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_notify" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_notify</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_notify</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_notify</refname> - <refname>sd_notifyf</refname> - <refname>sd_pid_notify</refname> - <refname>sd_pid_notifyf</refname> - <refname>sd_pid_notify_with_fds</refname> - <refpurpose>Notify service manager about start-up completion and other service status changes</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-daemon.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_notify</function></funcdef> - <paramdef>int <parameter>unset_environment</parameter></paramdef> - <paramdef>const char *<parameter>state</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_notifyf</function></funcdef> - <paramdef>int <parameter>unset_environment</parameter></paramdef> - <paramdef>const char *<parameter>format</parameter></paramdef> - <paramdef>...</paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_pid_notify</function></funcdef> - <paramdef>pid_t <parameter>pid</parameter></paramdef> - <paramdef>int <parameter>unset_environment</parameter></paramdef> - <paramdef>const char *<parameter>state</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_pid_notifyf</function></funcdef> - <paramdef>pid_t <parameter>pid</parameter></paramdef> - <paramdef>int <parameter>unset_environment</parameter></paramdef> - <paramdef>const char *<parameter>format</parameter></paramdef> - <paramdef>...</paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_pid_notify_with_fds</function></funcdef> - <paramdef>pid_t <parameter>pid</parameter></paramdef> - <paramdef>int <parameter>unset_environment</parameter></paramdef> - <paramdef>const char *<parameter>state</parameter></paramdef> - <paramdef>const int *<parameter>fds</parameter></paramdef> - <paramdef>unsigned <parameter>n_fds</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - <para><function>sd_notify()</function> may be called by a service - to notify the service manager about state changes. It can be used - to send arbitrary information, encoded in an - environment-block-like string. Most importantly, it can be used for - start-up completion notification.</para> - - <para>If the <parameter>unset_environment</parameter> parameter is - non-zero, <function>sd_notify()</function> will unset the - <varname>$NOTIFY_SOCKET</varname> environment variable before - returning (regardless of whether the function call itself - succeeded or not). Further calls to - <function>sd_notify()</function> will then fail, but the variable - is no longer inherited by child processes.</para> - - <para>The <parameter>state</parameter> parameter should contain a - newline-separated list of variable assignments, similar in style - to an environment block. A trailing newline is implied if none is - specified. The string may contain any kind of variable - assignments, but the following shall be considered - well-known:</para> - - <variablelist> - <varlistentry> - <term>READY=1</term> - - <listitem><para>Tells the service manager that service startup - is finished. This is only used by systemd if the service - definition file has Type=notify set. Since there is little - value in signaling non-readiness, the only value services - should send is <literal>READY=1</literal> (i.e. - <literal>READY=0</literal> is not defined).</para></listitem> - </varlistentry> - - <varlistentry> - <term>RELOADING=1</term> - - <listitem><para>Tells the service manager that the service is - reloading its configuration. This is useful to allow the - service manager to track the service's internal state, and - present it to the user. Note that a service that sends this - notification must also send a <literal>READY=1</literal> - notification when it completed reloading its - configuration.</para></listitem> - </varlistentry> - - <varlistentry> - <term>STOPPING=1</term> - - <listitem><para>Tells the service manager that the service is - beginning its shutdown. This is useful to allow the service - manager to track the service's internal state, and present it - to the user.</para></listitem> - </varlistentry> - - <varlistentry> - <term>STATUS=...</term> - - <listitem><para>Passes a single-line UTF-8 status string back - to the service manager that describes the service state. This - is free-form and can be used for various purposes: general - state feedback, fsck-like programs could pass completion - percentages and failing programs could pass a human-readable - error message. Example: <literal>STATUS=Completed 66% of file - system check...</literal></para></listitem> - </varlistentry> - - <varlistentry> - <term>ERRNO=...</term> - - <listitem><para>If a service fails, the errno-style error - code, formatted as string. Example: <literal>ERRNO=2</literal> - for ENOENT.</para></listitem> - </varlistentry> - - <varlistentry> - <term>BUSERROR=...</term> - - <listitem><para>If a service fails, the D-Bus error-style - error code. Example: - <literal>BUSERROR=org.freedesktop.DBus.Error.TimedOut</literal></para></listitem> - </varlistentry> - - <varlistentry> - <term>MAINPID=...</term> - - <listitem><para>The main process ID (PID) of the service, in - case the service manager did not fork off the process itself. - Example: <literal>MAINPID=4711</literal></para></listitem> - </varlistentry> - - <varlistentry> - <term>WATCHDOG=1</term> - - <listitem><para>Tells the service manager to update the - watchdog timestamp. This is the keep-alive ping that services - need to issue in regular intervals if - <varname>WatchdogSec=</varname> is enabled for it. See - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for information how to enable this functionality and - <citerefentry><refentrytitle>sd_watchdog_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for the details of how the service can check whether the - watchdog is enabled. </para></listitem> - </varlistentry> - - - <varlistentry> - <term>FDSTORE=1</term> - - <listitem><para>Stores additional file descriptors in the - service manager. File descriptors sent this way will be - maintained per-service by the service manager and be passed - again using the usual file descriptor passing logic on the - next invocation of the service (see - <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>). - This is useful for implementing service restart schemes where - services serialize their state to <filename>/run</filename>, - push their file descriptors to the system manager, and are - then restarted, retrieving their state again via socket - passing and <filename>/run</filename>. Note that the service - manager will accept messages for a service only if - <varname>FileDescriptorStoreMax=</varname> is set to non-zero - for it (defaults to zero). See - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. Multiple arrays of file descriptors may be sent - in separate messages, in which case the arrays are combined. - Note that the service manager removes duplicate file - descriptors before passing them to the service. Use - <function>sd_pid_notify_with_fds()</function> to send messages - with <literal>FDSTORE=1</literal>, see - below.</para></listitem> - </varlistentry> - - <varlistentry> - <term>FDNAME=...</term> - - <listitem><para>When used in combination with - <varname>FDSTORE=1</varname>, specifies a name for the - submitted file descriptors. This name is passed to the service - during activation, and may be queried using - <citerefentry><refentrytitle>sd_listen_fds_with_names</refentrytitle><manvolnum>3</manvolnum></citerefentry>. File - descriptors submitted without this field set, will implicitly - get the name <literal>stored</literal> assigned. Note that, if - multiple file descriptors are submitted at once, the specified - name will be assigned to all of them. In order to assign - different names to submitted file descriptors, submit them in - separate invocations of - <function>sd_pid_notify_with_fds()</function>. The name may - consist of any ASCII character, but must not contain control - characters or <literal>:</literal>. It may not be longer than - 255 characters. If a submitted name does not follow these - restrictions, it is ignored.</para></listitem> - </varlistentry> - - </variablelist> - - <para>It is recommended to prefix variable names that are not - listed above with <varname>X_</varname> to avoid namespace - clashes.</para> - - <para>Note that systemd will accept status data sent from a - service only if the <varname>NotifyAccess=</varname> option is - correctly set in the service definition file. See - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para> - - <para><function>sd_notifyf()</function> is similar to - <function>sd_notify()</function> but takes a - <function>printf()</function>-like format string plus - arguments.</para> - - <para><function>sd_pid_notify()</function> and - <function>sd_pid_notifyf()</function> are similar to - <function>sd_notify()</function> and - <function>sd_notifyf()</function> but take a process ID (PID) to - use as originating PID for the message as first argument. This is - useful to send notification messages on behalf of other processes, - provided the appropriate privileges are available. If the PID - argument is specified as 0, the process ID of the calling process - is used, in which case the calls are fully equivalent to - <function>sd_notify()</function> and - <function>sd_notifyf()</function>.</para> - - <para><function>sd_pid_notify_with_fds()</function> is similar to - <function>sd_pid_notify()</function> but takes an additional array - of file descriptors. These file descriptors are sent along the - notification message to the service manager. This is particularly - useful for sending <literal>FDSTORE=1</literal> messages, as - described above. The additional arguments are a pointer to the - file descriptor array plus the number of file descriptors in the - array. If the number of file descriptors is passed as 0, the call - is fully equivalent to <function>sd_pid_notify()</function>, i.e. - no file descriptors are passed. Note that sending file descriptors - to the service manager on messages that do not expect them (i.e. - without <literal>FDSTORE=1</literal>) they are immediately closed - on reception.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On failure, these calls return a negative errno-style error - code. If <varname>$NOTIFY_SOCKET</varname> was not set and hence - no status data could be sent, 0 is returned. If the status was - sent, these functions return with a positive return value. In - order to support both, init systems that implement this scheme and - those which do not, it is generally recommended to ignore the - return value of this call.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <xi:include href="libsystemd-pkgconfig.xml" xpointer="pkgconfig-text"/> - - <para>These functions send a single datagram with the - state string as payload to the <constant>AF_UNIX</constant> socket - referenced in the <varname>$NOTIFY_SOCKET</varname> environment - variable. If the first character of - <varname>$NOTIFY_SOCKET</varname> is <literal>@</literal>, the - string is understood as Linux abstract namespace socket. The - datagram is accompanied by the process credentials of the sending - service, using SCM_CREDENTIALS.</para> - </refsect1> - - <refsect1> - <title>Environment</title> - - <variablelist class='environment-variables'> - <varlistentry> - <term><varname>$NOTIFY_SOCKET</varname></term> - - <listitem><para>Set by the service manager for supervised - processes for status and start-up completion notification. - This environment variable specifies the socket - <function>sd_notify()</function> talks to. See above for - details.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Examples</title> - - <example> - <title>Start-up Notification</title> - - <para>When a service finished starting up, it might issue the - following call to notify the service manager:</para> - - <programlisting>sd_notify(0, "READY=1");</programlisting> - </example> - - <example> - <title>Extended Start-up Notification</title> - - <para>A service could send the following after completing - initialization:</para> - - <programlisting>sd_notifyf(0, "READY=1\n" - "STATUS=Processing requests...\n" - "MAINPID=%lu", - (unsigned long) getpid());</programlisting> - </example> - - <example> - <title>Error Cause Notification</title> - - <para>A service could send the following shortly before exiting, on failure:</para> - - <programlisting>sd_notifyf(0, "STATUS=Failed to start up: %s\n" - "ERRNO=%i", - strerror(errno), - errno);</programlisting> - </example> - - <example> - <title>Store a File Descriptor in the Service Manager</title> - - <para>To store an open file descriptor in the service manager, - in order to continue operation after a service restart without - losing state, use <literal>FDSTORE=1</literal>:</para> - - <programlisting>sd_pid_notify_with_fds(0, 0, "FDSTORE=1\nFDNAME=foobar", &fd, 1);</programlisting> - </example> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_listen_fds_with_names</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_watchdog_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_pid_get_session.xml b/man/sd_pid_get_session.xml deleted file mode 100644 index 806cff34e4..0000000000 --- a/man/sd_pid_get_session.xml +++ /dev/null @@ -1,359 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_pid_get_session" conditional='HAVE_PAM'> - - <refentryinfo> - <title>sd_pid_get_session</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_pid_get_session</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_pid_get_session</refname> - <refname>sd_pid_get_unit</refname> - <refname>sd_pid_get_user_unit</refname> - <refname>sd_pid_get_owner_uid</refname> - <refname>sd_pid_get_machine_name</refname> - <refname>sd_pid_get_slice</refname> - <refname>sd_pid_get_user_slice</refname> - <refname>sd_pid_get_cgroup</refname> - <refname>sd_peer_get_session</refname> - <refname>sd_peer_get_unit</refname> - <refname>sd_peer_get_user_unit</refname> - <refname>sd_peer_get_owner_uid</refname> - <refname>sd_peer_get_machine_name</refname> - <refname>sd_peer_get_slice</refname> - <refname>sd_peer_get_user_slice</refname> - <refname>sd_peer_get_cgroup</refname> - <refpurpose>Determine session, unit, owner of a session, - container/VM or slice of a specific PID or socket - peer</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-login.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_pid_get_session</function></funcdef> - <paramdef>pid_t <parameter>pid</parameter></paramdef> - <paramdef>char **<parameter>session</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_pid_get_unit</function></funcdef> - <paramdef>pid_t <parameter>pid</parameter></paramdef> - <paramdef>char **<parameter>unit</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_pid_get_user_unit</function></funcdef> - <paramdef>pid_t <parameter>pid</parameter></paramdef> - <paramdef>char **<parameter>unit</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_pid_get_owner_uid</function></funcdef> - <paramdef>pid_t <parameter>pid</parameter></paramdef> - <paramdef>uid_t *<parameter>uid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_pid_get_machine_name</function></funcdef> - <paramdef>pid_t <parameter>pid</parameter></paramdef> - <paramdef>char **<parameter>name</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_pid_get_slice</function></funcdef> - <paramdef>pid_t <parameter>pid</parameter></paramdef> - <paramdef>char **<parameter>slice</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_pid_get_user_slice</function></funcdef> - <paramdef>pid_t <parameter>pid</parameter></paramdef> - <paramdef>char **<parameter>slice</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_pid_get_cgroup</function></funcdef> - <paramdef>pid_t <parameter>pid</parameter></paramdef> - <paramdef>char **<parameter>cgroup</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_peer_get_session</function></funcdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>char **<parameter>session</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_peer_get_unit</function></funcdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>char **<parameter>unit</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_peer_get_user_unit</function></funcdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>char **<parameter>unit</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_peer_get_owner_uid</function></funcdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>uid_t *<parameter>uid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_peer_get_machine_name</function></funcdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>char **<parameter>name</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_peer_get_slice</function></funcdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>char **<parameter>slice</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_peer_get_user_slice</function></funcdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>char **<parameter>slice</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_peer_get_cgroup</function></funcdef> - <paramdef>int <parameter>fd</parameter></paramdef> - <paramdef>char **<parameter>cgroup</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_pid_get_session()</function> may be used to - determine the login session identifier of a process identified by - the specified process identifier. The session identifier is a - short string, suitable for usage in file system paths. Note that - not all processes are part of a login session (e.g. system service - processes, user processes that are shared between multiple - sessions of the same user, or kernel threads). For processes not - being part of a login session, this function will fail with - -ENODATA. The returned string needs to be freed with the libc - <citerefentry - project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use.</para> - - <para><function>sd_pid_get_unit()</function> may be used to - determine the systemd system unit (i.e. system service or scope - unit) identifier of a process identified by the specified PID. The - unit name is a short string, suitable for usage in file system - paths. Note that not all processes are part of a system - unit/service (e.g. user processes, or kernel threads). For - processes not being part of a systemd system unit, this function - will fail with -ENODATA. (More specifically, this call will not - work for kernel threads.) The returned string needs to be freed - with the libc <citerefentry - project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use.</para> - - <para><function>sd_pid_get_user_unit()</function> may be used to - determine the systemd user unit (i.e. user service or scope unit) - identifier of a process identified by the specified PID. This is - similar to <function>sd_pid_get_unit()</function>, but applies to - user units instead of system units.</para> - - <para><function>sd_pid_get_owner_uid()</function> may be used to - determine the Unix UID (user identifier) of the owner of the - session of a process identified the specified PID. Note that this - function will succeed for user processes which are shared between - multiple login sessions of the same user, whereas - <function>sd_pid_get_session()</function> will fail. For processes - not being part of a login session and not being a shared process - of a user, this function will fail with -ENODATA.</para> - - <para><function>sd_pid_get_machine_name()</function> may be used - to determine the name of the VM or container is a member of. The - machine name is a short string, suitable for usage in file system - paths. The returned string needs to be freed with the libc - <citerefentry - project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use. For processes not part of a VM or containers, this - function fails with -ENODATA.</para> - - <para><function>sd_pid_get_slice()</function> may be used to - determine the slice unit the process is a member of. See - <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details about slices. The returned string needs to be freed - with the libc - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use.</para> - - <para>Similarly, <function>sd_pid_get_user_slice()</function> - returns the user slice (as managed by the user's systemd instance) - of a process.</para> - - <para><function>sd_pid_get_cgroup()</function> returns the control - group path of the specified process, relative to the root of the - hierarchy. Returns the path without trailing slash, except for - processes located in the root control group, where "/" is - returned. To find the actual control group path in the file system, - the returned path needs to be prefixed with - <filename>/sys/fs/cgroup/</filename> (if the unified control group - setup is used), or - <filename>/sys/fs/cgroup/<replaceable>HIERARCHY</replaceable>/</filename> - (if the legacy multi-hierarchy control group setup is used).</para> - - <para>If the <varname>pid</varname> parameter of any of these - functions is passed as 0, the operation is executed for the - calling process.</para> - - <para>The <function>sd_peer_get_session()</function>, - <function>sd_peer_get_unit()</function>, - <function>sd_peer_get_user_unit()</function>, - <function>sd_peer_get_owner_uid()</function>, - <function>sd_peer_get_machine_name()</function>, - <function>sd_peer_get_slice()</function>, - <function>sd_peer_get_user_slice()</function> and - <function>sd_peer_get_cgroup()</function> calls operate similar to - their PID counterparts, but operate on a connected AF_UNIX socket - and retrieve information about the connected peer process. Note - that these fields are retrieved via <filename>/proc</filename>, - and hence are not suitable for authorization purposes, as they are - subject to races.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, these calls return 0 or a positive integer. On - failure, these calls return a negative errno-style error - code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - - <varlistentry> - <term><constant>-ESRCH</constant></term> - - <listitem><para>The specified PID does not refer to a running - process.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><constant>-BADF</constant></term> - - <listitem><para>The specified socket file descriptor was - invalid.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENODATA</constant></term> - - <listitem><para>The given field is not specified for the described - process or peer.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>An input parameter was invalid (out of range, - or NULL, where that is not accepted).</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Memory allocation failed.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_pid_get_session()</function>, - <function>sd_pid_get_unit()</function>, - <function>sd_pid_get_user_unit()</function>, - <function>sd_pid_get_owner_uid()</function>, - <function>sd_pid_get_machine_name()</function>, - <function>sd_pid_get_slice()</function>, - <function>sd_pid_get_user_slice()</function>, - <function>sd_peer_get_session()</function>, - <function>sd_peer_get_unit()</function>, - <function>sd_peer_get_user_unit()</function>, - <function>sd_peer_get_owner_uid()</function>, - <function>sd_peer_get_machine_name()</function>, - <function>sd_peer_get_slice()</function> and - <function>sd_peer_get_user_slice()</function> interfaces are - available as a shared library, which can be compiled and linked to - with the <constant>libsystemd</constant> <citerefentry - project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - - <para>Note that the login session identifier as - returned by <function>sd_pid_get_session()</function> - is completely unrelated to the process session - identifier as returned by - <citerefentry><refentrytitle>getsid</refentrytitle><manvolnum>2</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-login</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_session_is_active</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>getsid</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_seat_get_active.xml b/man/sd_seat_get_active.xml deleted file mode 100644 index c5e6ddab02..0000000000 --- a/man/sd_seat_get_active.xml +++ /dev/null @@ -1,212 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_seat_get_active" conditional='HAVE_PAM'> - - <refentryinfo> - <title>sd_seat_get_active</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_seat_get_active</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_seat_get_active</refname> - <refname>sd_seat_get_sessions</refname> - <refname>sd_seat_can_multi_session</refname> - <refname>sd_seat_can_tty</refname> - <refname>sd_seat_can_graphical</refname> - <refpurpose>Determine state of a specific seat</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-login.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_seat_get_active</function></funcdef> - <paramdef>const char *<parameter>seat</parameter></paramdef> - <paramdef>char **<parameter>session</parameter></paramdef> - <paramdef>uid_t *<parameter>uid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_seat_get_sessions</function></funcdef> - <paramdef>const char *<parameter>seat</parameter></paramdef> - <paramdef>char ***<parameter>sessions</parameter></paramdef> - <paramdef>uid_t **<parameter>uid</parameter></paramdef> - <paramdef>unsigned int *<parameter>n_uids</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_seat_can_multi_session</function></funcdef> - <paramdef>const char *<parameter>seat</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_seat_can_tty</function></funcdef> - <paramdef>const char *<parameter>seat</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_seat_can_graphical</function></funcdef> - <paramdef>const char *<parameter>seat</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_seat_get_active()</function> may be used to - determine which session is currently active on a seat, if there is - any. Returns the session identifier and the user identifier of the - Unix user the session is belonging to. Either the session or the - user identifier parameter can be passed <constant>NULL</constant>, - in case only one of the parameters shall be queried. The returned - string needs to be freed with the libc - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use.</para> - - <para><function>sd_seat_get_sessions()</function> may be used to - determine all sessions on the specified seat. Returns two arrays, - one (<constant>NULL</constant> terminated) with the session - identifiers of the sessions and one with the user identifiers of - the Unix users the sessions belong to. An additional parameter may - be used to return the number of entries in the latter array. The - two arrays and the latter parameter may be passed as - <constant>NULL</constant> in case these values need not to be - determined. The arrays and the strings referenced by them need to - be freed with the libc - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use. Note that instead of an empty array - <constant>NULL</constant> may be returned and should be considered - equivalent to an empty array.</para> - - <para><function>sd_seat_can_multi_session()</function> may be used - to determine whether a specific seat is capable of multi-session, - i.e. allows multiple login sessions in parallel (with only one - being active at a time).</para> - - <para><function>sd_seat_can_tty()</function> may be used to - determine whether a specific seat provides TTY functionality, i.e. - is useful as a text console.</para> - - <para><function>sd_seat_can_graphical()</function> may be used to - determine whether a specific seat provides graphics functionality, - i.e. is useful as a graphics display.</para> - - <para>If the <varname>seat</varname> parameter of any of these - functions is passed as <constant>NULL</constant>, the operation is - executed for the seat of the session of the calling process, if - there is any.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para> On success, <function>sd_seat_get_active()</function> - returns 0 or a positive integer. On success, - <function>sd_seat_get_sessions()</function> returns the number of - entries in the session identifier array. If the test succeeds, - <function>sd_seat_can_multi_session</function>, - <function>sd_seat_can_tty</function> and - <function>sd_seat_can_graphical</function> return a positive - integer, if it fails 0. On failure, these calls return a negative - errno-style error code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - - <varlistentry> - <term><constant>-ENODATA</constant></term> - - <listitem><para>The given field is not specified for the described - seat.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENXIO</constant></term> - - <listitem><para>The specified seat is unknown.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>An input parameter was invalid (out of range, - or NULL, where that is not accepted).</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Memory allocation failed.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_seat_get_active()</function>, - <function>sd_seat_get_sessions()</function>, - <function>sd_seat_can_multi_session()</function>, - <function>sd_seat_can_tty()</function> and - <function>sd_seat_can_graphical()</function> interfaces are - available as a shared library, which can be compiled and linked to - with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-login</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_session_get_seat</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_session_is_active.xml b/man/sd_session_is_active.xml deleted file mode 100644 index a6076b177a..0000000000 --- a/man/sd_session_is_active.xml +++ /dev/null @@ -1,359 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_session_is_active" conditional='HAVE_PAM'> - - <refentryinfo> - <title>sd_session_is_active</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_session_is_active</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_session_is_active</refname> - <refname>sd_session_is_remote</refname> - <refname>sd_session_get_state</refname> - <refname>sd_session_get_uid</refname> - <refname>sd_session_get_seat</refname> - <refname>sd_session_get_service</refname> - <refname>sd_session_get_type</refname> - <refname>sd_session_get_class</refname> - <refname>sd_session_get_desktop</refname> - <refname>sd_session_get_display</refname> - <refname>sd_session_get_tty</refname> - <refname>sd_session_get_vt</refname> - <refname>sd_session_get_remote_host</refname> - <refname>sd_session_get_remote_user</refname> - <refpurpose>Determine state of a specific session</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-login.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_session_is_active</function></funcdef> - <paramdef>const char *<parameter>session</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_session_is_remote</function></funcdef> - <paramdef>const char *<parameter>session</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_session_get_state</function></funcdef> - <paramdef>const char *<parameter>session</parameter></paramdef> - <paramdef>char **<parameter>state</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_session_get_uid</function></funcdef> - <paramdef>const char *<parameter>session</parameter></paramdef> - <paramdef>uid_t *<parameter>uid</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_session_get_seat</function></funcdef> - <paramdef>const char *<parameter>session</parameter></paramdef> - <paramdef>char **<parameter>seat</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_session_get_service</function></funcdef> - <paramdef>const char *<parameter>session</parameter></paramdef> - <paramdef>char **<parameter>service</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_session_get_type</function></funcdef> - <paramdef>const char *<parameter>session</parameter></paramdef> - <paramdef>char **<parameter>type</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_session_get_class</function></funcdef> - <paramdef>const char *<parameter>session</parameter></paramdef> - <paramdef>char **<parameter>class</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_session_get_desktop</function></funcdef> - <paramdef>const char *<parameter>session</parameter></paramdef> - <paramdef>char **<parameter>desktop</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_session_get_display</function></funcdef> - <paramdef>const char *<parameter>session</parameter></paramdef> - <paramdef>char **<parameter>display</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_session_get_remote_host</function></funcdef> - <paramdef>const char *<parameter>session</parameter></paramdef> - <paramdef>char **<parameter>remote_host</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_session_get_remote_user</function></funcdef> - <paramdef>const char *<parameter>session</parameter></paramdef> - <paramdef>char **<parameter>remote_user</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_session_get_tty</function></funcdef> - <paramdef>const char *<parameter>session</parameter></paramdef> - <paramdef>char **<parameter>tty</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_session_get_vt</function></funcdef> - <paramdef>const char *<parameter>session</parameter></paramdef> - <paramdef>unsigned int *<parameter>vt</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_session_is_active()</function> may be used to - determine whether the session identified by the specified session - identifier is currently active (i.e. currently in the foreground - and available for user input) or not.</para> - - <para><function>sd_session_is_remote()</function> may be used to - determine whether the session identified by the specified session - identifier is a remote session (i.e. its remote host is known) or - not.</para> - - <para><function>sd_session_get_state()</function> may be used to - determine the state of the session identified by the specified - session identifier. The following states are currently known: - <literal>online</literal> (session logged in, but session not - active, i.e. not in the foreground), <literal>active</literal> - (session logged in and active, i.e. in the foreground), - <literal>closing</literal> (session nominally logged out, but some - processes belonging to it are still around). In the future - additional states might be defined, client code should be written - to be robust in regards to additional state strings being - returned. This function is a more generic version of - <function>sd_session_is_active()</function>. The returned string - needs to be freed with the libc - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use.</para> - - <para><function>sd_session_get_uid()</function> may be used to - determine the user identifier of the Unix user the session - identified by the specified session identifier belongs to.</para> - - <para><function>sd_session_get_seat()</function> may be used to - determine the seat identifier of the seat the session identified - by the specified session identifier belongs to. Note that not all - sessions are attached to a seat, this call will fail for them. The - returned string needs to be freed with the libc - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use.</para> - - <para><function>sd_session_get_service()</function> may be used to - determine the name of the service (as passed during PAM session - setup) that registered the session identified by the specified - session identifier. The returned string needs to be freed with the - libc - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use.</para> - - <para><function>sd_session_get_type()</function> may be used to - determine the type of the session identified by the specified - session identifier. The returned string is one of - <literal>x11</literal>, <literal>wayland</literal>, - <literal>tty</literal>, <literal>mir</literal> or - <literal>unspecified</literal> and needs to be freed with the libc - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use.</para> - - <para><function>sd_session_get_class()</function> may be used to - determine the class of the session identified by the specified - session identifier. The returned string is one of - <literal>user</literal>, <literal>greeter</literal>, - <literal>lock-screen</literal>, or <literal>background</literal> - and needs to be freed with the libc - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use.</para> - - <para><function>sd_session_get_desktop()</function> may be used to - determine the brand of the desktop running on the session - identified by the specified session identifier. This field can be - set freely by desktop environments and does not follow any special - formatting. However, desktops are strongly recommended to use the - same identifiers and capitalization as for - <varname>$XDG_CURRENT_DESKTOP</varname>, as defined by the <ulink - url="http://standards.freedesktop.org/desktop-entry-spec/latest/">Desktop - Entry Specification</ulink>. The returned string needs to be freed - with the libc - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use.</para> - - <para><function>sd_session_get_display()</function> may be used to - determine the X11 display of the session identified by the - specified session identifier. The returned string needs to be - freed with the libc - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use.</para> - - <para><function>sd_session_get_remote_host()</function> may be - used to determine the remote hostname of the session identified by - the specified session identifier. The returned string needs to be - freed with the libc - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use.</para> - - <para><function>sd_session_get_remote_user()</function> may be - used to determine the remote username of the session identified by - the specified session identifier. The returned string needs to be - freed with the libc - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use. Note that this value is rarely known to the - system, and even then should not be relied on.</para> - - <para><function>sd_session_get_tty()</function> may be used to - determine the TTY device of the session identified by the - specified session identifier. The returned string needs to be - freed with the libc - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use.</para> - - <para><function>sd_session_get_vt()</function> may be used to - determine the VT number of the session identified by the specified - session identifier. This function will return an error if the seat - does not support VTs.</para> - - <para>If the <varname>session</varname> parameter of any of these - functions is passed as <constant>NULL</constant>, the operation is - executed for the session the calling process is a member of, if - there is any.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>If the test succeeds, - <function>sd_session_is_active()</function> and - <function>sd_session_is_remote()</function> return a - positive integer; if it fails, 0. On success, - <function>sd_session_get_state()</function>, - <function>sd_session_get_uid()</function>, - <function>sd_session_get_seat()</function>, - <function>sd_session_get_service()</function>, - <function>sd_session_get_type()</function>, - <function>sd_session_get_class()</function>, - <function>sd_session_get_display()</function>, - <function>sd_session_get_remote_user()</function>, - <function>sd_session_get_remote_host()</function> and - <function>sd_session_get_tty()</function> return 0 or - a positive integer. On failure, these calls return a - negative errno-style error code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - - <varlistentry> - <term><constant>-ENXIO</constant></term> - - <listitem><para>The specified session does not exist.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENODATA</constant></term> - - <listitem><para>The given field is not specified for the described - session.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>An input parameter was invalid (out of range, - or NULL, where that is not accepted).</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Memory allocation failed.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>The <function>sd_session_is_active()</function>, - <function>sd_session_get_state()</function>, - <function>sd_session_get_uid()</function>, - <function>sd_session_get_seat()</function>, - <function>sd_session_get_service()</function>, - <function>sd_session_get_type()</function>, - <function>sd_session_get_class()</function>, - <function>sd_session_get_display()</function>, - <function>sd_session_get_remote_host()</function>, - <function>sd_session_get_remote_user()</function> and - <function>sd_session_get_tty()</function> - interfaces are available as a shared library, which can - be compiled and linked to with the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - file.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-login</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_pid_get_session</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_uid_get_state.xml b/man/sd_uid_get_state.xml deleted file mode 100644 index 130af761da..0000000000 --- a/man/sd_uid_get_state.xml +++ /dev/null @@ -1,230 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_uid_get_state" conditional='HAVE_PAM'> - - <refentryinfo> - <title>sd_uid_get_state</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_uid_get_state</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_uid_get_state</refname> - <refname>sd_uid_is_on_seat</refname> - <refname>sd_uid_get_sessions</refname> - <refname>sd_uid_get_seats</refname> - <refname>sd_uid_get_display</refname> - <refpurpose>Determine login state of a specific Unix user ID</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-login.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_uid_get_state</function></funcdef> - <paramdef>uid_t <parameter>uid</parameter></paramdef> - <paramdef>char **<parameter>state</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_uid_is_on_seat</function></funcdef> - <paramdef>uid_t <parameter>uid</parameter></paramdef> - <paramdef>int <parameter>require_active</parameter></paramdef> - <paramdef>const char *<parameter>seat</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_uid_get_sessions</function></funcdef> - <paramdef>uid_t <parameter>uid</parameter></paramdef> - <paramdef>int <parameter>require_active</parameter></paramdef> - <paramdef>char ***<parameter>sessions</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_uid_get_seats</function></funcdef> - <paramdef>uid_t <parameter>uid</parameter></paramdef> - <paramdef>int <parameter>require_active</parameter></paramdef> - <paramdef>char ***<parameter>seats</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>sd_uid_get_display</function></funcdef> - <paramdef>uid_t <parameter>uid</parameter></paramdef> - <paramdef>char **<parameter>session</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>sd_uid_get_state()</function> may be used to - determine the login state of a specific Unix user identifier. The - following states are currently known: <literal>offline</literal> - (user not logged in at all), <literal>lingering</literal> (user - not logged in, but some user services running), - <literal>online</literal> (user logged in, but not active, i.e. - has no session in the foreground), <literal>active</literal> (user - logged in, and has at least one active session, i.e. one session - in the foreground), <literal>closing</literal> (user not logged - in, and not lingering, but some processes are still around). In - the future additional states might be defined, client code should - be written to be robust in regards to additional state strings - being returned. The returned string needs to be freed with the - libc - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use.</para> - - <para><function>sd_uid_is_on_seat()</function> may be used to - determine whether a specific user is logged in or active on a - specific seat. Accepts a Unix user identifier and a seat - identifier string as parameters. The - <parameter>require_active</parameter> parameter is a boolean - value. If non-zero (true), this function will test if the user is - active (i.e. has a session that is in the foreground and accepting - user input) on the specified seat, otherwise (false) only if the - user is logged in (and possibly inactive) on the specified - seat.</para> - - <para><function>sd_uid_get_sessions()</function> may be used to - determine the current sessions of the specified user. Accepts a - Unix user identifier as parameter. The - <parameter>require_active</parameter> parameter controls whether - the returned list shall consist of only those sessions where the - user is currently active (> 0), where the user is currently - online but possibly inactive (= 0), or logged in at all but - possibly closing the session (< 0). The call returns a - <constant>NULL</constant> terminated string array of session - identifiers in <parameter>sessions</parameter> which needs to be - freed by the caller with the libc - <citerefentry project='man-pages'><refentrytitle>free</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call after use, including all the strings referenced. If the - string array parameter is passed as <constant>NULL</constant>, the - array will not be filled in, but the return code still indicates - the number of current sessions. Note that instead of an empty - array <constant>NULL</constant> may be returned and should be - considered equivalent to an empty array.</para> - - <para>Similarly, <function>sd_uid_get_seats()</function> may be - used to determine the list of seats on which the user currently - has sessions. Similar semantics apply, however note that the user - may have multiple sessions on the same seat as well as sessions - with no attached seat and hence the number of entries in the - returned array may differ from the one returned by - <function>sd_uid_get_sessions()</function>.</para> - - <para><function>sd_uid_get_display()</function> returns the name - of the "primary" session of a user. If the user has graphical - sessions, it will be the oldest graphical session. Otherwise, it - will be the oldest open session.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, <function>sd_uid_get_state()</function> returns - 0 or a positive integer. If the test succeeds, - <function>sd_uid_is_on_seat()</function> returns a positive - integer; if it fails, 0. - <function>sd_uid_get_sessions()</function> and - <function>sd_uid_get_seats()</function> return the number of - entries in the returned arrays. - <function>sd_uid_get_display()</function> returns a non-negative - code on success. On failure, these calls return a negative - errno-style error code.</para> - </refsect1> - - <refsect1> - <title>Errors</title> - - <para>Returned errors may indicate the following problems:</para> - - <variablelist> - - <varlistentry> - <term><constant>-ENODATA</constant></term> - - <listitem><para>The given field is not specified for the described - user.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENXIO</constant></term> - - <listitem><para>The specified seat is unknown.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><constant>-EINVAL</constant></term> - - <listitem><para>An input parameter was invalid (out of range, - or NULL, where that is not accepted). This is also returned if - the passed user ID is 0xFFFF or 0xFFFFFFFF, which are - undefined on Linux.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>-ENOMEM</constant></term> - - <listitem><para>Memory allocation failed.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>Functions described here are available as a shared library, - and can be compiled and linked to using the - <constant>libsystemd</constant> <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry> - entry.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-login</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_pid_get_owner_uid</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sd_watchdog_enabled.xml b/man/sd_watchdog_enabled.xml deleted file mode 100644 index 3de9899453..0000000000 --- a/man/sd_watchdog_enabled.xml +++ /dev/null @@ -1,169 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2013 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="sd_watchdog_enabled" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sd_watchdog_enabled</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sd_watchdog_enabled</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>sd_watchdog_enabled</refname> - <refpurpose>Check whether the service manager expects watchdog keep-alive notifications from a service</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <systemd/sd-daemon.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>sd_watchdog_enabled</function></funcdef> - <paramdef>int <parameter>unset_environment</parameter></paramdef> - <paramdef>uint64_t *<parameter>usec</parameter></paramdef> - </funcprototype> - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - <para><function>sd_watchdog_enabled()</function> may be called by - a service to detect whether the service manager expects regular - keep-alive watchdog notification events from it, and the timeout - after which the manager will act on the service if it did not get - such a notification.</para> - - <para>If the <varname>$WATCHDOG_USEC</varname> environment - variable is set, and the <varname>$WATCHDOG_PID</varname> variable - is unset or set to the PID of the current process, the service - manager expects notifications from this process. The manager will - usually terminate a service when it does not get a notification - message within the specified time after startup and after each - previous message. It is recommended that a daemon sends a - keep-alive notification message to the service manager every half - of the time returned here. Notification messages may be sent with - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry> - with a message string of <literal>WATCHDOG=1</literal>.</para> - - <para>If the <parameter>unset_environment</parameter> parameter is - non-zero, <function>sd_watchdog_enabled()</function> will unset - the <varname>$WATCHDOG_USEC</varname> and - <varname>$WATCHDOG_PID</varname> environment variables before - returning (regardless of whether the function call itself - succeeded or not). Those variables are no longer inherited by - child processes. Further calls to - <function>sd_watchdog_enabled()</function> will also return with - zero.</para> - - <para>If the <parameter>usec</parameter> parameter is non-NULL, - <function>sd_watchdog_enabled()</function> will write the timeout - in µs for the watchdog logic to it.</para> - - <para>To enable service supervision with the watchdog logic, use - <varname>WatchdogSec=</varname> in service files. See - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para> - - <para>Use - <citerefentry><refentrytitle>sd_event_set_watchdog</refentrytitle><manvolnum>3</manvolnum></citerefentry> - to enable automatic watchdog support in - <citerefentry><refentrytitle>sd-event</refentrytitle><manvolnum>3</manvolnum></citerefentry>-based event loops.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On failure, this call returns a negative errno-style error - code. If the service manager expects watchdog keep-alive - notification messages to be sent, > 0 is returned, otherwise 0 - is returned. Only if the return value is > 0, the - <parameter>usec</parameter> parameter is valid after the - call.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <xi:include href="libsystemd-pkgconfig.xml" xpointer="pkgconfig-text"/> - - <para>Internally, this functions parses the - <varname>$WATCHDOG_PID</varname> and - <varname>$WATCHDOG_USEC</varname> environment variable. The call - will ignore these variables if <varname>$WATCHDOG_PID</varname> - does not contain the PID of the current process, under the - assumption that in that case, the variables were set for a - different process further up the process tree.</para> - </refsect1> - - <refsect1> - <title>Environment</title> - - <variablelist class='environment-variables'> - <varlistentry> - <term><varname>$WATCHDOG_PID</varname></term> - - <listitem><para>Set by the system manager for supervised - process for which watchdog support is enabled, and contains - the PID of that process. See above for - details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$WATCHDOG_USEC</varname></term> - - <listitem><para>Set by the system manager for supervised - process for which watchdog support is enabled, and contains - the watchdog timeout in µs See above for - details.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_event_set_watchdog</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/shutdown.xml b/man/shutdown.xml deleted file mode 100644 index a8af387c67..0000000000 --- a/man/shutdown.xml +++ /dev/null @@ -1,175 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="shutdown" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>shutdown</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>shutdown</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>shutdown</refname> - <refpurpose>Halt, power-off or reboot the machine</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>shutdown</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="opt">TIME</arg> - <arg choice="opt" rep="repeat">WALL</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>shutdown</command> may be used to halt, power-off - or reboot the machine.</para> - - <para>The first argument may be a time string (which is usually - <literal>now</literal>). Optionally, this may be followed by a - wall message to be sent to all logged-in users before going - down.</para> - - <para>The time string may either be in the format - <literal>hh:mm</literal> for hour/minutes specifying the time to - execute the shutdown at, specified in 24h clock format. - Alternatively it may be in the syntax <literal>+m</literal> - referring to the specified number of minutes m from now. - <literal>now</literal> is an alias for <literal>+0</literal>, i.e. - for triggering an immediate shutdown. If no time argument is - specified, <literal>+1</literal> is implied.</para> - - <para>Note that to specify a wall message you must specify a time - argument, too.</para> - - <para>If the time argument is used, 5 minutes before the system - goes down the <filename>/run/nologin</filename> file is created to - ensure that further logins shall not be allowed.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--help</option></term> - - <xi:include href="standard-options.xml" xpointer="help-text" /> - </varlistentry> - - <varlistentry> - <term><option>-H</option></term> - <term><option>--halt</option></term> - - <listitem><para>Halt the machine.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-P</option></term> - <term><option>--poweroff</option></term> - - <listitem><para>Power-off the machine (the - default).</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-r</option></term> - <term><option>--reboot</option></term> - - <listitem><para>Reboot the - machine.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-h</option></term> - - <listitem><para>Equivalent to <option>--poweroff</option>, - unless <option>--halt</option> is specified.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-k</option></term> - - <listitem><para>Do not halt, power-off, reboot, just write - wall message.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--no-wall</option></term> - - <listitem><para>Do not send wall - message before - halt, power-off, reboot.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-c</option></term> - - <listitem><para>Cancel a pending shutdown. This may be used - cancel the effect of an invocation of - <command>shutdown</command> with a time argument that is not - <literal>+0</literal> or - <literal>now</literal>.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>halt</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sysctl.d.xml b/man/sysctl.d.xml deleted file mode 100644 index ccf6c8e39f..0000000000 --- a/man/sysctl.d.xml +++ /dev/null @@ -1,184 +0,0 @@ -<?xml version="1.0"?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2011 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="sysctl.d" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sysctl.d</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sysctl.d</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>sysctl.d</refname> - <refpurpose>Configure kernel parameters at boot</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/sysctl.d/*.conf</filename></para> - <para><filename>/run/sysctl.d/*.conf</filename></para> - <para><filename>/usr/lib/sysctl.d/*.conf</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>At boot, - <citerefentry><refentrytitle>systemd-sysctl.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - reads configuration files from the above directories to configure - <citerefentry project='man-pages'><refentrytitle>sysctl</refentrytitle><manvolnum>8</manvolnum></citerefentry> - kernel parameters.</para> - </refsect1> - - <refsect1> - <title>Configuration Format</title> - - <para>The configuration files contain a list of variable - assignments, separated by newlines. Empty lines and lines whose - first non-whitespace character is <literal>#</literal> or - <literal>;</literal> are ignored.</para> - - <para>Note that either <literal>/</literal> or - <literal>.</literal> may be used as separators within sysctl - variable names. If the first separator is a slash, remaining - slashes and dots are left intact. If the first separator is a dot, - dots and slashes are interchanged. - <literal>kernel.domainname=foo</literal> and - <literal>kernel/domainname=foo</literal> are equivalent and will - cause <literal>foo</literal> to be written to - <filename>/proc/sys/kernel/domainname</filename>. Either - <literal>net.ipv4.conf.enp3s0/200.forwarding</literal> or - <literal>net/ipv4/conf/enp3s0.200/forwarding</literal> may be used - to refer to - <filename>/proc/sys/net/ipv4/conf/enp3s0.200/forwarding</filename>. - </para> - - <para>The settings configured with <filename>sysctl.d</filename> - files will be applied early on boot. The network - interface-specific options will also be applied individually for - each network interface as it shows up in the system. (More - specifically, <filename>net.ipv4.conf.*</filename>, - <filename>net.ipv6.conf.*</filename>, - <filename>net.ipv4.neigh.*</filename> and - <filename>net.ipv6.neigh.*</filename>).</para> - - <para>Many sysctl parameters only become available when certain - kernel modules are loaded. Modules are usually loaded on demand, - e.g. when certain hardware is plugged in or network brought up. - This means that - <citerefentry><refentrytitle>systemd-sysctl.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - which runs during early boot will not configure such parameters if - they become available after it has run. To set such parameters, it - is recommended to add an - <citerefentry><refentrytitle>udev</refentrytitle><manvolnum>7</manvolnum></citerefentry> - rule to set those parameters when they become available. - Alternatively, a slightly simpler and less efficient option is to - add the module to - <citerefentry><refentrytitle>modules-load.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - causing it to be loaded statically before sysctl settings are - applied (see example below).</para> - </refsect1> - - <xi:include href="standard-conf.xml" xpointer="confd" /> - - <refsect1> - <title>Examples</title> - <example> - <title>Set kernel YP domain name</title> - <para><filename>/etc/sysctl.d/domain-name.conf</filename>: - </para> - - <programlisting>kernel.domainname=example.com</programlisting> - </example> - - <example> - <title>Apply settings available only when a certain module is loaded (method one)</title> - <para><filename>/etc/udev/rules.d/99-bridge.rules</filename>: - </para> - - <programlisting>ACTION=="add", SUBSYSTEM=="module", KERNEL=="br_netfilter", \ - RUN+="/usr/lib/systemd/systemd-sysctl --prefix=/net/bridge" -</programlisting> - - <para><filename>/etc/sysctl.d/bridge.conf</filename>: - </para> - - <programlisting>net.bridge.bridge-nf-call-ip6tables = 0 -net.bridge.bridge-nf-call-iptables = 0 -net.bridge.bridge-nf-call-arptables = 0 -</programlisting> - - <para>This method applies settings when the module is - loaded. Please note that, unless the <filename>br_netfilter</filename> - module is loaded, bridged packets will not be filtered by - Netfilter (starting with kernel 3.18), so simply not loading the - module is sufficient to avoid filtering.</para> - </example> - - <example> - <title>Apply settings available only when a certain module is loaded (method two)</title> - <para><filename>/etc/modules-load.d/bridge.conf</filename>: - </para> - - <programlisting>br_netfilter</programlisting> - - <para><filename>/etc/sysctl.d/bridge.conf</filename>: - </para> - - <programlisting>net.bridge.bridge-nf-call-ip6tables = 0 -net.bridge.bridge-nf-call-iptables = 0 -net.bridge.bridge-nf-call-arptables = 0 -</programlisting> - - <para>This method forces the module to be always loaded. Please - note that, unless the <filename>br_netfilter</filename> module is - loaded, bridged packets will not be filtered with Netfilter - (starting with kernel 3.18), so simply not loading the module is - sufficient to avoid filtering.</para> - </example> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-sysctl.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-delta</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>sysctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>sysctl.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>modprobe</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemctl.xml b/man/systemctl.xml deleted file mode 100644 index 991e9bafaf..0000000000 --- a/man/systemctl.xml +++ /dev/null @@ -1,1838 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ -<!ENTITY % entities SYSTEM "custom-entities.ent" > -%entities; -]> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemctl" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemctl</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemctl</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemctl</refname> - <refpurpose>Control the systemd system and service manager</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemctl</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="plain">COMMAND</arg> - <arg choice="opt" rep="repeat">NAME</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemctl</command> may be used to introspect and - control the state of the <literal>systemd</literal> system and - service manager. Please refer to - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - for an introduction into the basic concepts and functionality this - tool manages.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>-t</option></term> - <term><option>--type=</option></term> - - <listitem> - <para>The argument should be a comma-separated list of unit - types such as <option>service</option> and - <option>socket</option>. - </para> - - <para>If one of the arguments is a unit type, when listing - units, limit display to certain unit types. Otherwise, units - of all types will be shown.</para> - - <para>As a special case, if one of the arguments is - <option>help</option>, a list of allowed values will be - printed and the program will exit.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--state=</option></term> - - <listitem> - <para>The argument should be a comma-separated list of unit - LOAD, SUB, or ACTIVE states. When listing units, show only - those in the specified states. Use <option>--state=failed</option> - to show only failed units.</para> - - <para>As a special case, if one of the arguments is - <option>help</option>, a list of allowed values will be - printed and the program will exit.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-p</option></term> - <term><option>--property=</option></term> - - <listitem> - <para>When showing unit/job/manager properties with the - <command>show</command> command, limit display to properties - specified in the argument. The argument should be a - comma-separated list of property names, such as - <literal>MainPID</literal>. Unless specified, all known - properties are shown. If specified more than once, all - properties with the specified names are shown. Shell - completion is implemented for property names.</para> - - <para>For the manager itself, - <command>systemctl show</command> will show all available - properties. Those properties are documented in - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para> - - <para>Properties for units vary by unit type, so showing any - unit (even a non-existent one) is a way to list properties - pertaining to this type. Similarly, showing any job will list - properties pertaining to all jobs. Properties for units are - documented in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - and the pages for individual unit types - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - etc.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-a</option></term> - <term><option>--all</option></term> - - <listitem> - <para>When listing units, show all loaded units, regardless - of their state, including inactive units. When showing - unit/job/manager properties, show all properties regardless - whether they are set or not.</para> - <para>To list all units installed on the system, use the - <command>list-unit-files</command> command instead.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-r</option></term> - <term><option>--recursive</option></term> - - <listitem> - <para>When listing units, also show units of local - containers. Units of local containers will be prefixed with - the container name, separated by a single colon character - (<literal>:</literal>).</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--reverse</option></term> - - <listitem> - <para>Show reverse dependencies between units with - <command>list-dependencies</command>, i.e. follow - dependencies of type <varname>WantedBy=</varname>, - <varname>RequiredBy=</varname>, - <varname>PartOf=</varname>, <varname>BoundBy=</varname>, - instead of <varname>Wants=</varname> and similar. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--after</option></term> - - <listitem> - <para>With <command>list-dependencies</command>, show the - units that are ordered before the specified unit. In other - words, recursively list units following the - <varname>After=</varname> dependency.</para> - - <para>Note that any <varname>After=</varname> dependency is - automatically mirrored to create a - <varname>Before=</varname> dependency. Temporal dependencies - may be specified explicitly, but are also created implicitly - for units which are <varname>WantedBy=</varname> targets - (see - <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>), - and as a result of other directives (for example - <varname>RequiresMountsFor=</varname>). Both explicitly - and implicitly introduced dependencies are shown with - <command>list-dependencies</command>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--before</option></term> - - <listitem> - <para>With <command>list-dependencies</command>, show the - units that are ordered after the specified unit. In other - words, recursively list units following the - <varname>Before=</varname> dependency.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-l</option></term> - <term><option>--full</option></term> - - <listitem> - <para>Do not ellipsize unit names, process tree entries, - journal output, or truncate unit descriptions in the output - of <command>status</command>, <command>list-units</command>, - <command>list-jobs</command>, and - <command>list-timers</command>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--value</option></term> - - <listitem> - <para>When printing properties with <command>show</command>, - only print the value, and skip the property name and - <literal>=</literal>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--show-types</option></term> - - <listitem> - <para>When showing sockets, show the type of the socket.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--job-mode=</option></term> - - <listitem> - <para>When queuing a new job, this option controls how to deal with - already queued jobs. It takes one of <literal>fail</literal>, - <literal>replace</literal>, - <literal>replace-irreversibly</literal>, - <literal>isolate</literal>, - <literal>ignore-dependencies</literal>, - <literal>ignore-requirements</literal> or - <literal>flush</literal>. Defaults to - <literal>replace</literal>, except when the - <command>isolate</command> command is used which implies the - <literal>isolate</literal> job mode.</para> - - <para>If <literal>fail</literal> is specified and a requested - operation conflicts with a pending job (more specifically: - causes an already pending start job to be reversed into a stop - job or vice versa), cause the operation to fail.</para> - - <para>If <literal>replace</literal> (the default) is - specified, any conflicting pending job will be replaced, as - necessary.</para> - - <para>If <literal>replace-irreversibly</literal> is specified, - operate like <literal>replace</literal>, but also mark the new - jobs as irreversible. This prevents future conflicting - transactions from replacing these jobs (or even being enqueued - while the irreversible jobs are still pending). Irreversible - jobs can still be cancelled using the <command>cancel</command> - command.</para> - - <para><literal>isolate</literal> is only valid for start - operations and causes all other units to be stopped when the - specified unit is started. This mode is always used when the - <command>isolate</command> command is used.</para> - - <para><literal>flush</literal> will cause all queued jobs to - be canceled when the new job is enqueued.</para> - - <para>If <literal>ignore-dependencies</literal> is specified, - then all unit dependencies are ignored for this new job and - the operation is executed immediately. If passed, no required - units of the unit passed will be pulled in, and no ordering - dependencies will be honored. This is mostly a debugging and - rescue tool for the administrator and should not be used by - applications.</para> - - <para><literal>ignore-requirements</literal> is similar to - <literal>ignore-dependencies</literal>, but only causes the - requirement dependencies to be ignored, the ordering - dependencies will still be honoured.</para> - </listitem> - - </varlistentry> - - <varlistentry> - <term><option>--fail</option></term> - - <listitem> - <para>Shorthand for <option>--job-mode=</option>fail.</para> - <para>When used with the <command>kill</command> command, - if no units were killed, the operation results in an error. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-i</option></term> - <term><option>--ignore-inhibitors</option></term> - - <listitem> - <para>When system shutdown or a sleep state is requested, - ignore inhibitor locks. Applications can establish inhibitor - locks to avoid that certain important operations (such as CD - burning or suchlike) are interrupted by system shutdown or a - sleep state. Any user may take these locks and privileged - users may override these locks. If any locks are taken, - shutdown and sleep state requests will normally fail - (regardless of whether privileged or not) and a list of active locks - is printed. However, if <option>--ignore-inhibitors</option> - is specified, the locks are ignored and not printed, and the - operation attempted anyway, possibly requiring additional - privileges.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-q</option></term> - <term><option>--quiet</option></term> - - <listitem> - <para>Suppress printing of the results of various commands - and also the hints about truncated log lines. This does not - suppress output of commands for which the printed output is - the only result (like <command>show</command>). Errors are - always printed.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--no-block</option></term> - - <listitem> - <para>Do not synchronously wait for the requested operation - to finish. If this is not specified, the job will be - verified, enqueued and <command>systemctl</command> will - wait until the unit's start-up is completed. By passing this - argument, it is only verified and enqueued.</para> - </listitem> - </varlistentry> - - <xi:include href="user-system-options.xml" xpointer="user" /> - <xi:include href="user-system-options.xml" xpointer="system" /> - - <!-- we do not document -failed here, as it has been made - redundant by -state=failed, which it predates. To keep - things simple, we only document the new switch, while - keeping the old one around for compatibility only. --> - - <varlistentry> - <term><option>--no-wall</option></term> - - <listitem> - <para>Do not send wall message before halt, power-off, - reboot.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--global</option></term> - - <listitem> - <para>When used with <command>enable</command> and - <command>disable</command>, operate on the global user - configuration directory, thus enabling or disabling a unit - file globally for all future logins of all users.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--no-reload</option></term> - - <listitem> - <para>When used with <command>enable</command> and - <command>disable</command>, do not implicitly reload daemon - configuration after executing the changes.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--no-ask-password</option></term> - - <listitem> - <para>When used with <command>start</command> and related - commands, disables asking for passwords. Background services - may require input of a password or passphrase string, for - example to unlock system hard disks or cryptographic - certificates. Unless this option is specified and the - command is invoked from a terminal, - <command>systemctl</command> will query the user on the - terminal for the necessary secrets. Use this option to - switch this behavior off. In this case, the password must be - supplied by some other means (for example graphical password - agents) or the service might fail. This also disables - querying the user for authentication for privileged - operations.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--kill-who=</option></term> - - <listitem> - <para>When used with <command>kill</command>, choose which - processes to send a signal to. Must be one of - <option>main</option>, <option>control</option> or - <option>all</option> to select whether to kill only the main - process, the control process or all processes of the - unit. The main process of the unit is the one that defines - the life-time of it. A control process of a unit is one that - is invoked by the manager to induce state changes of it. For - example, all processes started due to the - <varname>ExecStartPre=</varname>, - <varname>ExecStop=</varname> or - <varname>ExecReload=</varname> settings of service units are - control processes. Note that there is only one control - process per unit at a time, as only one state change is - executed at a time. For services of type - <varname>Type=forking</varname>, the initial process started - by the manager for <varname>ExecStart=</varname> is a - control process, while the process ultimately forked off by - that one is then considered the main process of the unit (if - it can be determined). This is different for service units - of other types, where the process forked off by the manager - for <varname>ExecStart=</varname> is always the main process - itself. A service unit consists of zero or one main process, - zero or one control process plus any number of additional - processes. Not all unit types manage processes of these - types however. For example, for mount units, control processes - are defined (which are the invocations of - <filename>&MOUNT_PATH;</filename> and - <filename>&UMOUNT_PATH;</filename>), but no main process - is defined. If omitted, defaults to - <option>all</option>.</para> - </listitem> - - </varlistentry> - - <varlistentry> - <term><option>-s</option></term> - <term><option>--signal=</option></term> - - <listitem> - <para>When used with <command>kill</command>, choose which - signal to send to selected processes. Must be one of the - well-known signal specifiers such as <constant>SIGTERM</constant>, <constant>SIGINT</constant> or - <constant>SIGSTOP</constant>. If omitted, defaults to - <option>SIGTERM</option>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-f</option></term> - <term><option>--force</option></term> - - <listitem> - <para>When used with <command>enable</command>, overwrite - any existing conflicting symlinks.</para> - - <para>When used with <command>halt</command>, - <command>poweroff</command>, <command>reboot</command> or - <command>kexec</command>, execute the selected operation - without shutting down all units. However, all processes will - be killed forcibly and all file systems are unmounted or - remounted read-only. This is hence a drastic but relatively - safe option to request an immediate reboot. If - <option>--force</option> is specified twice for these - operations, they will be executed immediately without - terminating any processes or unmounting any file - systems. Warning: specifying <option>--force</option> twice - with any of these operations might result in data - loss.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--message=</option></term> - - <listitem> - <para>When used with <command>halt</command>, - <command>poweroff</command>, <command>reboot</command> or - <command>kexec</command>, set a short message explaining the reason - for the operation. The message will be logged together with the - default shutdown message.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--now</option></term> - - <listitem> - <para>When used with <command>enable</command>, the units - will also be started. When used with <command>disable</command> or - <command>mask</command>, the units will also be stopped. The start - or stop operation is only carried out when the respective enable or - disable operation has been successful.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--root=</option></term> - - <listitem> - <para>When used with - <command>enable</command>/<command>disable</command>/<command>is-enabled</command> - (and related commands), use an alternate root path when - looking for unit files.</para> - </listitem> - - </varlistentry> - - <varlistentry> - <term><option>--runtime</option></term> - - <listitem> - <para>When used with <command>enable</command>, - <command>disable</command>, <command>edit</command>, - (and related commands), make changes only temporarily, so - that they are lost on the next reboot. This will have the - effect that changes are not made in subdirectories of - <filename>/etc</filename> but in <filename>/run</filename>, - with identical immediate effects, however, since the latter - is lost on reboot, the changes are lost too.</para> - - <para>Similarly, when used with - <command>set-property</command>, make changes only - temporarily, so that they are lost on the next - reboot.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--preset-mode=</option></term> - - <listitem> - <para>Takes one of <literal>full</literal> (the default), - <literal>enable-only</literal>, - <literal>disable-only</literal>. When used with the - <command>preset</command> or <command>preset-all</command> - commands, controls whether units shall be disabled and - enabled according to the preset rules, or only enabled, or - only disabled.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-n</option></term> - <term><option>--lines=</option></term> - - <listitem> - <para>When used with <command>status</command>, controls the - number of journal lines to show, counting from the most - recent ones. Takes a positive integer argument. Defaults to - 10.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-o</option></term> - <term><option>--output=</option></term> - - <listitem> - <para>When used with <command>status</command>, controls the - formatting of the journal entries that are shown. For the - available choices, see - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - Defaults to <literal>short</literal>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--firmware-setup</option></term> - - <listitem> - <para>When used with the <command>reboot</command> command, - indicate to the system's firmware to boot into setup - mode. Note that this is currently only supported on some EFI - systems and only if the system was booted in EFI - mode.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--plain</option></term> - - <listitem> - <para>When used with <command>list-dependencies</command>, - <command>list-units</command> or <command>list-machines</command>, the - the output is printed as a list instead of a tree, and the bullet - circles are omitted.</para> - </listitem> - </varlistentry> - - <xi:include href="user-system-options.xml" xpointer="host" /> - <xi:include href="user-system-options.xml" xpointer="machine" /> - - <xi:include href="standard-options.xml" xpointer="no-pager" /> - <xi:include href="standard-options.xml" xpointer="no-legend" /> - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - </refsect1> - - <refsect1> - <title>Commands</title> - - <para>The following commands are understood:</para> - - <refsect2> - <title>Unit Commands</title> - - <variablelist> - <varlistentry> - <term><command>list-units <optional><replaceable>PATTERN</replaceable>...</optional></command></term> - - <listitem> - <para>List known units (subject to limitations specified - with <option>-t</option>). If one or more - <replaceable>PATTERN</replaceable>s are specified, only - units matching one of them are shown.</para> - - <para>This is the default command.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>list-sockets <optional><replaceable>PATTERN</replaceable>...</optional></command></term> - - <listitem> - <para>List socket units ordered by listening address. - If one or more <replaceable>PATTERN</replaceable>s are - specified, only socket units matching one of them are - shown. Produces output similar to - <programlisting> -LISTEN UNIT ACTIVATES -/dev/initctl systemd-initctl.socket systemd-initctl.service -... -[::]:22 sshd.socket sshd.service -kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service - -5 sockets listed.</programlisting> - Note: because the addresses might contains spaces, this output - is not suitable for programmatic consumption. - </para> - - <para>See also the options <option>--show-types</option>, - <option>--all</option>, and <option>--state=</option>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>list-timers <optional><replaceable>PATTERN</replaceable>...</optional></command></term> - - <listitem> - <para>List timer units ordered by the time they elapse - next. If one or more <replaceable>PATTERN</replaceable>s - are specified, only units matching one of them are shown. - </para> - - <para>See also the options <option>--all</option> and - <option>--state=</option>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>start <replaceable>PATTERN</replaceable>...</command></term> - - <listitem> - <para>Start (activate) one or more units specified on the - command line.</para> - - <para>Note that glob patterns operate on the set of primary names of currently loaded units. Units which - are not active and are not in a failed state usually are not loaded, and will not be matched by any - pattern. In addition, in case of instantiated units, systemd is often unaware of the instance name until - the instance has been started. Therefore, using glob patterns with <command>start</command> has limited - usefulness. Also, secondary alias names of units are not considered.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>stop <replaceable>PATTERN</replaceable>...</command></term> - - <listitem> - <para>Stop (deactivate) one or more units specified on the - command line.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>reload <replaceable>PATTERN</replaceable>...</command></term> - - <listitem> - <para>Asks all units listed on the command line to reload - their configuration. Note that this will reload the - service-specific configuration, not the unit configuration - file of systemd. If you want systemd to reload the - configuration file of a unit, use the - <command>daemon-reload</command> command. In other words: - for the example case of Apache, this will reload Apache's - <filename>httpd.conf</filename> in the web server, not the - <filename>apache.service</filename> systemd unit - file.</para> - - <para>This command should not be confused with the - <command>daemon-reload</command> command.</para> - </listitem> - - </varlistentry> - <varlistentry> - <term><command>restart <replaceable>PATTERN</replaceable>...</command></term> - - <listitem> - <para>Restart one or more units specified on the command - line. If the units are not running yet, they will be - started.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>try-restart <replaceable>PATTERN</replaceable>...</command></term> - - <listitem> - <para>Restart one or more units specified on the command - line if the units are running. This does nothing if units are not - running.</para> - <!-- Note that we don't document condrestart here, as that is just compatibility support, and we generally - don't document that. --> - </listitem> - </varlistentry> - <varlistentry> - <term><command>reload-or-restart <replaceable>PATTERN</replaceable>...</command></term> - - <listitem> - <para>Reload one or more units if they support it. If not, - restart them instead. If the units are not running yet, they - will be started.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>try-reload-or-restart <replaceable>PATTERN</replaceable>...</command></term> - - <listitem> - <para>Reload one or more units if they support it. If not, - restart them instead. This does nothing if the units are not - running.</para> - <!-- Note that we don't document force-reload here, as that is just compatibility support, and we generally - don't document that. --> - </listitem> - </varlistentry> - <varlistentry> - <term><command>isolate <replaceable>NAME</replaceable></command></term> - - <listitem> - <para>Start the unit specified on the command line and its - dependencies and stop all others. If a unit name with no - extension is given, an extension of - <literal>.target</literal> will be assumed.</para> - - <para>This is similar to changing the runlevel in a - traditional init system. The <command>isolate</command> - command will immediately stop processes that are not enabled - in the new unit, possibly including the graphical - environment or terminal you are currently using.</para> - - <para>Note that this is allowed only on units where - <option>AllowIsolate=</option> is enabled. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>kill <replaceable>PATTERN</replaceable>...</command></term> - - <listitem> - <para>Send a signal to one or more processes of the - unit. Use <option>--kill-who=</option> to select which - process to kill. Use <option>--signal=</option> to select - the signal to send.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>is-active <replaceable>PATTERN</replaceable>...</command></term> - - <listitem> - <para>Check whether any of the specified units are active - (i.e. running). Returns an exit code - <constant>0</constant> if at least one is active, or - non-zero otherwise. Unless <option>--quiet</option> is - specified, this will also print the current unit state to - standard output.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>is-failed <replaceable>PATTERN</replaceable>...</command></term> - - <listitem> - <para>Check whether any of the specified units are in a - "failed" state. Returns an exit code - <constant>0</constant> if at least one has failed, - non-zero otherwise. Unless <option>--quiet</option> is - specified, this will also print the current unit state to - standard output.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>status</command> <optional><replaceable>PATTERN</replaceable>...|<replaceable>PID</replaceable>...]</optional></term> - - <listitem> - <para>Show terse runtime status information about one or - more units, followed by most recent log data from the - journal. If no units are specified, show system status. If - combined with <option>--all</option>, also show the status of - all units (subject to limitations specified with - <option>-t</option>). If a PID is passed, show information - about the unit the process belongs to.</para> - - <para>This function is intended to generate human-readable - output. If you are looking for computer-parsable output, - use <command>show</command> instead. By default, this - function only shows 10 lines of output and ellipsizes - lines to fit in the terminal window. This can be changed - with <option>--lines</option> and <option>--full</option>, - see above. In addition, <command>journalctl - --unit=<replaceable>NAME</replaceable></command> or - <command>journalctl - --user-unit=<replaceable>NAME</replaceable></command> use - a similar filter for messages and might be more - convenient. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>show</command> <optional><replaceable>PATTERN</replaceable>...|<replaceable>JOB</replaceable>...</optional></term> - - <listitem> - <para>Show properties of one or more units, jobs, or the - manager itself. If no argument is specified, properties of - the manager will be shown. If a unit name is specified, - properties of the unit is shown, and if a job ID is - specified, properties of the job is shown. By default, empty - properties are suppressed. Use <option>--all</option> to - show those too. To select specific properties to show, use - <option>--property=</option>. This command is intended to be - used whenever computer-parsable output is required. Use - <command>status</command> if you are looking for formatted - human-readable output.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>cat <replaceable>PATTERN</replaceable>...</command></term> - - <listitem> - <para>Show backing files of one or more units. Prints the - "fragment" and "drop-ins" (source files) of units. Each - file is preceded by a comment which includes the file - name.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>set-property <replaceable>NAME</replaceable> <replaceable>ASSIGNMENT</replaceable>...</command></term> - - <listitem> - <para>Set the specified unit properties at runtime where - this is supported. This allows changing configuration - parameter properties such as resource control settings at - runtime. Not all properties may be changed at runtime, but - many resource control settings (primarily those in - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>) - may. The changes are applied instantly, and stored on disk - for future boots, unless <option>--runtime</option> is - passed, in which case the settings only apply until the - next reboot. The syntax of the property assignment follows - closely the syntax of assignments in unit files.</para> - - <para>Example: <command>systemctl set-property foobar.service CPUShares=777</command></para> - - <para>If the specified unit appears to be inactive, the - changes will be only stored on disk as described - previously hence they will be effective when the unit will - be started.</para> - - <para>Note that this command allows changing multiple - properties at the same time, which is preferable over - setting them individually. Like unit file configuration - settings, assigning the empty list to list parameters will - reset the list.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>help <replaceable>PATTERN</replaceable>...|<replaceable>PID</replaceable>...</command></term> - - <listitem> - <para>Show manual pages for one or more units, if - available. If a PID is given, the manual pages for the unit - the process belongs to are shown.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>reset-failed [<replaceable>PATTERN</replaceable>...]</command></term> - - <listitem> - <para>Reset the <literal>failed</literal> state of the - specified units, or if no unit name is passed, reset the state of all - units. When a unit fails in some way (i.e. process exiting - with non-zero error code, terminating abnormally or timing - out), it will automatically enter the - <literal>failed</literal> state and its exit code and status - is recorded for introspection by the administrator until the - service is restarted or reset with this command.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term> - <command>list-dependencies</command> - <optional><replaceable>NAME</replaceable></optional> - </term> - - <listitem> - <para>Shows units required and wanted by the specified - unit. This recursively lists units following the - <varname>Requires=</varname>, - <varname>Requisite=</varname>, - <varname>ConsistsOf=</varname>, - <varname>Wants=</varname>, <varname>BindsTo=</varname> - dependencies. If no unit is specified, - <filename>default.target</filename> is implied.</para> - - <para>By default, only target units are recursively - expanded. When <option>--all</option> is passed, all other - units are recursively expanded as well.</para> - - <para>Options <option>--reverse</option>, - <option>--after</option>, <option>--before</option> - may be used to change what types of dependencies - are shown.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect2> - - <refsect2> - <title>Unit File Commands</title> - - <variablelist> - <varlistentry> - <term><command>list-unit-files <optional><replaceable>PATTERN...</replaceable></optional></command></term> - - <listitem> - <para>List installed unit files and their enablement state - (as reported by <command>is-enabled</command>). If one or - more <replaceable>PATTERN</replaceable>s are specified, - only units whose filename (just the last component of the - path) matches one of them are shown.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>enable <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Enable one or more unit files or unit file instances, - as specified on the command line. This will create a number - of symlinks as encoded in the <literal>[Install]</literal> - sections of the unit files. After the symlinks have been - created, the systemd configuration is reloaded (in a way that - is equivalent to <command>daemon-reload</command>) to ensure - the changes are taken into account immediately. Note that - this does <emphasis>not</emphasis> have the effect of also - starting any of the units being enabled. If this - is desired, either <option>--now</option> should be used - together with this command, or an additional <command>start</command> - command must be invoked for the unit. Also note that, in case of - instance enablement, symlinks named the same as instances - are created in the install location, however they all point to the - same template unit file.</para> - - <para>This command will print the actions executed. This - output may be suppressed by passing <option>--quiet</option>. - </para> - - <para>Note that this operation creates only the suggested - symlinks for the units. While this command is the - recommended way to manipulate the unit configuration - directory, the administrator is free to make additional - changes manually by placing or removing symlinks in the - directory. This is particularly useful to create - configurations that deviate from the suggested default - installation. In this case, the administrator must make sure - to invoke <command>daemon-reload</command> manually as - necessary to ensure the changes are taken into account. - </para> - - <para>Enabling units should not be confused with starting - (activating) units, as done by the <command>start</command> - command. Enabling and starting units is orthogonal: units - may be enabled without being started and started without - being enabled. Enabling simply hooks the unit into various - suggested places (for example, so that the unit is - automatically started on boot or when a particular kind of - hardware is plugged in). Starting actually spawns the daemon - process (in case of service units), or binds the socket (in - case of socket units), and so on.</para> - - <para>Depending on whether <option>--system</option>, - <option>--user</option>, <option>--runtime</option>, - or <option>--global</option> is specified, this enables the unit - for the system, for the calling user only, for only this boot of - the system, or for all future logins of all users, or only this - boot. Note that in the last case, no systemd daemon - configuration is reloaded.</para> - - <para>Using <command>enable</command> on masked units - results in an error.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>disable <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Disables one or more units. This removes all symlinks - to the specified unit files from the unit configuration - directory, and hence undoes the changes made by - <command>enable</command>. Note however that this removes - all symlinks to the unit files (i.e. including manual - additions), not just those actually created by - <command>enable</command>. This call implicitly reloads the - systemd daemon configuration after completing the disabling - of the units. Note that this command does not implicitly - stop the units that are being disabled. If this is desired, either - <option>--now</option> should be used together with this command, or - an additional <command>stop</command> command should be executed - afterwards.</para> - - <para>This command will print the actions executed. This - output may be suppressed by passing <option>--quiet</option>. - </para> - - <para>This command honors <option>--system</option>, - <option>--user</option>, <option>--runtime</option> and - <option>--global</option> in a similar way as - <command>enable</command>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>reenable <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Reenable one or more unit files, as specified on the - command line. This is a combination of - <command>disable</command> and <command>enable</command> and - is useful to reset the symlinks a unit is enabled with to - the defaults configured in the <literal>[Install]</literal> - section of the unit file.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>preset <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Reset the enable/disable status one or more unit files, as specified on - the command line, to the defaults configured in the preset policy files. This - has the same effect as <command>disable</command> or - <command>enable</command>, depending how the unit is listed in the preset - files.</para> - - <para>Use <option>--preset-mode=</option> to control whether units shall be - enabled and disabled, or only enabled, or only disabled.</para> - - <para>If the unit carries no install information, it will be silently ignored - by this command.</para> - - <para>For more information on the preset policy format, see - <citerefentry><refentrytitle>systemd.preset</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - For more information on the concept of presets, please consult the - <ulink url="http://freedesktop.org/wiki/Software/systemd/Preset">Preset</ulink> - document.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>preset-all</command></term> - - <listitem> - <para>Resets all installed unit files to the defaults - configured in the preset policy file (see above).</para> - - <para>Use <option>--preset-mode=</option> to control - whether units shall be enabled and disabled, or only - enabled, or only disabled.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>is-enabled <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Checks whether any of the specified unit files are - enabled (as with <command>enable</command>). Returns an - exit code of 0 if at least one is enabled, non-zero - otherwise. Prints the current enable status (see table). - To suppress this output, use <option>--quiet</option>. - </para> - - <table> - <title> - <command>is-enabled</command> output - </title> - - <tgroup cols='3'> - <thead> - <row> - <entry>Name</entry> - <entry>Description</entry> - <entry>Exit Code</entry> - </row> - </thead> - <tbody> - <row> - <entry><literal>enabled</literal></entry> - <entry morerows='1'>Enabled via <filename>.wants/</filename>, <filename>.requires/</filename> or alias symlinks (permanently in <filename>/etc/systemd/system/</filename>, or transiently in <filename>/run/systemd/system/</filename>).</entry> - <entry morerows='1'>0</entry> - </row> - <row> - <entry><literal>enabled-runtime</literal></entry> - </row> - <row> - <entry><literal>linked</literal></entry> - <entry morerows='1'>Made available through one or more symlinks to the unit file (permanently in <filename>/etc/systemd/system/</filename> or transiently in <filename>/run/systemd/system/</filename>), even though the unit file might reside outside of the unit file search path.</entry> - <entry morerows='1'>> 0</entry> - </row> - <row> - <entry><literal>linked-runtime</literal></entry> - </row> - <row> - <entry><literal>masked</literal></entry> - <entry morerows='1'>Completely disabled, so that any start operation on it fails (permanently in <filename>/etc/systemd/system/</filename> or transiently in <filename>/run/systemd/systemd/</filename>).</entry> - <entry morerows='1'>> 0</entry> - </row> - <row> - <entry><literal>masked-runtime</literal></entry> - </row> - <row> - <entry><literal>static</literal></entry> - <entry>The unit file is not enabled, and has no provisions for enabling in the <literal>[Install]</literal> unit file section.</entry> - <entry>0</entry> - </row> - <row> - <entry><literal>indirect</literal></entry> - <entry>The unit file itself is not enabled, but it has a non-empty <varname>Also=</varname> setting in the <literal>[Install]</literal> unit file section, listing other unit files that might be enabled.</entry> - <entry>0</entry> - </row> - <row> - <entry><literal>disabled</literal></entry> - <entry>The unit file is not enabled, but contains an <literal>[Install]</literal> section with installation instructions.</entry> - <entry>> 0</entry> - </row> - <row> - <entry><literal>generated</literal></entry> - <entry>The unit file was generated dynamically via a generator tool. See <citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>. Generated unit files may not be enabled, they are enabled implicitly by their generator.</entry> - <entry>0</entry> - </row> - <row> - <entry><literal>transient</literal></entry> - <entry>The unit file has been created dynamically with the runtime API. Transient units may not be enabled.</entry> - <entry>0</entry> - </row> - <row> - <entry><literal>bad</literal></entry> - <entry>The unit file is invalid or another error occurred. Note that <command>is-enabled</command> will not actually return this state, but print an error message instead. However the unit file listing printed by <command>list-unit-files</command> might show it.</entry> - <entry>> 0</entry> - </row> - </tbody> - </tgroup> - </table> - - </listitem> - </varlistentry> - - <varlistentry> - <term><command>mask <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Mask one or more unit files, as specified on the - command line. This will link these units to - <filename>/dev/null</filename>, making it impossible to - start them. This is a stronger version of - <command>disable</command>, since it prohibits all kinds of - activation of the unit, including enablement and manual - activation. Use this option with care. This honors the - <option>--runtime</option> option to only mask temporarily - until the next reboot of the system. The <option>--now</option> - option can be used to ensure that the units are also stopped.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>unmask <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Unmask one or more unit files, as specified on the - command line. This will undo the effect of - <command>mask</command>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>link <replaceable>FILENAME</replaceable>...</command></term> - - <listitem> - <para>Link a unit file that is not in the unit file search - paths into the unit file search path. This requires an - absolute path to a unit file. The effect of this can be - undone with <command>disable</command>. The effect of this - command is that a unit file is available for - <command>start</command> and other commands although it - is not installed directly in the unit search path.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>revert <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Revert one or more unit files to their vendor versions. This command removes drop-in configuration - files that modify the specified units, as well as any user-configured unit file that overrides a matching - vendor supplied unit file. Specifically, for a unit <literal>foo.service</literal> the matching directories - <literal>foo.service.d/</literal> with all their contained files are removed, both below the persistent and - runtime configuration directories (i.e. below <filename>/etc/systemd/system</filename> and - <filename>/run/systemd/system</filename>); if the unit file has a vendor-supplied version (i.e. a unit file - located below <filename>/usr</filename>) any matching peristent or runtime unit file that overrides it is - removed, too. Note that if a unit file has no vendor-supplied version (i.e. is only defined below - <filename>/etc/systemd/system</filename> or <filename>/run/systemd/system</filename>, but not in a unit - file stored below <filename>/usr</filename>), then it is not removed. Also, if a unit is masked, it is - unmasked.</para> - - <para>Effectively, this command may be used to undo all changes made with <command>systemctl - edit</command>, <command>systemctl set-property</command> and <command>systemctl mask</command> and puts - the original unit file with its settings back in effect.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>add-wants <replaceable>TARGET</replaceable> - <replaceable>NAME</replaceable>...</command></term> - <term><command>add-requires <replaceable>TARGET</replaceable> - <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Adds <literal>Wants=</literal> or <literal>Requires=</literal> - dependencies, respectively, to the specified - <replaceable>TARGET</replaceable> for one or more units. </para> - - <para>This command honors <option>--system</option>, - <option>--user</option>, <option>--runtime</option> and - <option>--global</option> in a way similar to - <command>enable</command>.</para> - - </listitem> - </varlistentry> - - <varlistentry> - <term><command>edit <replaceable>NAME</replaceable>...</command></term> - - <listitem> - <para>Edit a drop-in snippet or a whole replacement file if - <option>--full</option> is specified, to extend or override the - specified unit.</para> - - <para>Depending on whether <option>--system</option> (the default), - <option>--user</option>, or <option>--global</option> is specified, - this command creates a drop-in file for each unit either for the system, - for the calling user, or for all futures logins of all users. Then, - the editor (see the "Environment" section below) is invoked on - temporary files which will be written to the real location if the - editor exits successfully.</para> - - <para>If <option>--full</option> is specified, this will copy the - original units instead of creating drop-in files.</para> - - <para>If <option>--runtime</option> is specified, the changes will - be made temporarily in <filename>/run</filename> and they will be - lost on the next reboot.</para> - - <para>If the temporary file is empty upon exit, the modification of - the related unit is canceled.</para> - - <para>After the units have been edited, systemd configuration is - reloaded (in a way that is equivalent to <command>daemon-reload</command>). - </para> - - <para>Note that this command cannot be used to remotely edit units - and that you cannot temporarily edit units which are in - <filename>/etc</filename>, since they take precedence over - <filename>/run</filename>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>get-default</command></term> - - <listitem> - <para>Return the default target to boot into. This returns - the target unit name <filename>default.target</filename> - is aliased (symlinked) to.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>set-default <replaceable>NAME</replaceable></command></term> - - <listitem> - <para>Set the default target to boot into. This sets - (symlinks) the <filename>default.target</filename> alias - to the given target unit.</para> - </listitem> - </varlistentry> - - </variablelist> - </refsect2> - - <refsect2> - <title>Machine Commands</title> - - <variablelist> - <varlistentry> - <term><command>list-machines <optional><replaceable>PATTERN</replaceable>...</optional></command></term> - - <listitem> - <para>List the host and all running local containers with - their state. If one or more - <replaceable>PATTERN</replaceable>s are specified, only - containers matching one of them are shown. - </para> - </listitem> - </varlistentry> - </variablelist> - </refsect2> - - <refsect2> - <title>Job Commands</title> - - <variablelist> - <varlistentry> - <term><command>list-jobs <optional><replaceable>PATTERN...</replaceable></optional></command></term> - - <listitem> - <para>List jobs that are in progress. If one or more - <replaceable>PATTERN</replaceable>s are specified, only - jobs for units matching one of them are shown.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>cancel <replaceable>JOB</replaceable>...</command></term> - - <listitem> - <para>Cancel one or more jobs specified on the command line - by their numeric job IDs. If no job ID is specified, cancel - all pending jobs.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect2> - - <refsect2> - <title>Environment Commands</title> - - <variablelist> - <varlistentry> - <term><command>show-environment</command></term> - - <listitem> - <para>Dump the systemd manager environment block. The - environment block will be dumped in straight-forward form - suitable for sourcing into a shell script. This environment - block will be passed to all processes the manager - spawns.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>set-environment <replaceable>VARIABLE=VALUE</replaceable>...</command></term> - - <listitem> - <para>Set one or more systemd manager environment variables, - as specified on the command line.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>unset-environment <replaceable>VARIABLE</replaceable>...</command></term> - - <listitem> - <para>Unset one or more systemd manager environment - variables. If only a variable name is specified, it will be - removed regardless of its value. If a variable and a value - are specified, the variable is only removed if it has the - specified value.</para> - </listitem> - </varlistentry> - <varlistentry> - <term> - <command>import-environment</command> - <optional><replaceable>VARIABLE...</replaceable></optional> - </term> - - <listitem> - <para>Import all, one or more environment variables set on - the client into the systemd manager environment block. If - no arguments are passed, the entire environment block is - imported. Otherwise, a list of one or more environment - variable names should be passed, whose client-side values - are then imported into the manager's environment - block.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect2> - - <refsect2> - <title>Manager Lifecycle Commands</title> - - <variablelist> - <varlistentry> - <term><command>daemon-reload</command></term> - - <listitem> - <para>Reload the systemd manager configuration. This will - rerun all generators (see - <citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>), - reload all unit files, and recreate the entire dependency - tree. While the daemon is being reloaded, all sockets - systemd listens on behalf of user configuration will stay - accessible.</para> - - <para>This command should not be confused with the - <command>reload</command> command.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>daemon-reexec</command></term> - - <listitem> - <para>Reexecute the systemd manager. This will serialize the - manager state, reexecute the process and deserialize the - state again. This command is of little use except for - debugging and package upgrades. Sometimes, it might be - helpful as a heavy-weight <command>daemon-reload</command>. - While the daemon is being reexecuted, all sockets systemd listening - on behalf of user configuration will stay accessible. - </para> - </listitem> - </varlistentry> - </variablelist> - </refsect2> - - <refsect2> - <title>System Commands</title> - - <variablelist> - <varlistentry> - <term><command>is-system-running</command></term> - - <listitem> - <para>Checks whether the system is operational. This - returns success (exit code 0) when the system is fully up - and running, specifically not in startup, shutdown or - maintenance mode, and with no failed services. Failure is - returned otherwise (exit code non-zero). In addition, the - current state is printed in a short string to standard - output, see the table below. Use <option>--quiet</option> to - suppress this output.</para> - - <table> - <title><command>is-system-running</command> output</title> - <tgroup cols='3'> - <colspec colname='name'/> - <colspec colname='description'/> - <colspec colname='exit-code'/> - <thead> - <row> - <entry>Name</entry> - <entry>Description</entry> - <entry>Exit Code</entry> - </row> - </thead> - <tbody> - <row> - <entry><varname>initializing</varname></entry> - <entry><para>Early bootup, before - <filename>basic.target</filename> is reached - or the <varname>maintenance</varname> state entered. - </para></entry> - <entry>> 0</entry> - </row> - <row> - <entry><varname>starting</varname></entry> - <entry><para>Late bootup, before the job queue - becomes idle for the first time, or one of the - rescue targets are reached.</para></entry> - <entry>> 0</entry> - </row> - <row> - <entry><varname>running</varname></entry> - <entry><para>The system is fully - operational.</para></entry> - <entry>0</entry> - </row> - <row> - <entry><varname>degraded</varname></entry> - <entry><para>The system is operational but one or more - units failed.</para></entry> - <entry>> 0</entry> - </row> - <row> - <entry><varname>maintenance</varname></entry> - <entry><para>The rescue or emergency target is - active.</para></entry> - <entry>> 0</entry> - </row> - <row> - <entry><varname>stopping</varname></entry> - <entry><para>The manager is shutting - down.</para></entry> - <entry>> 0</entry> - </row> - <row> - <entry><varname>offline</varname></entry> - <entry><para>The manager is not - running. Specifically, this is the operational - state if an incompatible program is running as - system manager (PID 1).</para></entry> - <entry>> 0</entry> - </row> - <row> - <entry><varname>unknown</varname></entry> - <entry><para>The operational state could not be - determined, due to lack of resources or another - error cause.</para></entry> - <entry>> 0</entry> - </row> - </tbody> - </tgroup> - </table> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>default</command></term> - - <listitem> - <para>Enter default mode. This is mostly equivalent to - <command>isolate default.target</command>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>rescue</command></term> - - <listitem> - <para>Enter rescue mode. This is mostly equivalent to - <command>isolate rescue.target</command>, but also prints a - wall message to all users.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>emergency</command></term> - - <listitem> - <para>Enter emergency mode. This is mostly equivalent to - <command>isolate emergency.target</command>, but also prints - a wall message to all users.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>halt</command></term> - - <listitem> - <para>Shut down and halt the system. This is mostly equivalent to - <command>start halt.target --job-mode=replace-irreversibly</command>, but also - prints a wall message to all users. If combined with - <option>--force</option>, shutdown of all running services is - skipped, however all processes are killed and all file - systems are unmounted or mounted read-only, immediately - followed by the system halt. If <option>--force</option> is - specified twice, the operation is immediately executed - without terminating any processes or unmounting any file - systems. This may result in data loss.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>poweroff</command></term> - - <listitem> - <para>Shut down and power-off the system. This is mostly - equivalent to <command>start poweroff.target --job-mode=replace-irreversibly</command>, - but also prints a wall message to all users. If combined with - <option>--force</option>, shutdown of all running services is - skipped, however all processes are killed and all file - systems are unmounted or mounted read-only, immediately - followed by the powering off. If <option>--force</option> is - specified twice, the operation is immediately executed - without terminating any processes or unmounting any file - systems. This may result in data loss.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><command>reboot <optional><replaceable>arg</replaceable></optional></command></term> - - <listitem> - <para>Shut down and reboot the system. This is mostly - equivalent to <command>start reboot.target --job-mode=replace-irreversibly</command>, - but also prints a wall message to all users. If combined with - <option>--force</option>, shutdown of all running services is - skipped, however all processes are killed and all file - systems are unmounted or mounted read-only, immediately - followed by the reboot. If <option>--force</option> is - specified twice, the operation is immediately executed - without terminating any processes or unmounting any file - systems. This may result in data loss.</para> - - <para>If the optional argument - <replaceable>arg</replaceable> is given, it will be passed - as the optional argument to the - <citerefentry><refentrytitle>reboot</refentrytitle><manvolnum>2</manvolnum></citerefentry> - system call. The value is architecture and firmware - specific. As an example, <literal>recovery</literal> might - be used to trigger system recovery, and - <literal>fota</literal> might be used to trigger a - <quote>firmware over the air</quote> update.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>kexec</command></term> - - <listitem> - <para>Shut down and reboot the system via kexec. This is - mostly equivalent to <command>start kexec.target --job-mode=replace-irreversibly</command>, - but also prints a wall message to all users. If combined - with <option>--force</option>, shutdown of all running - services is skipped, however all processes are killed and - all file systems are unmounted or mounted read-only, - immediately followed by the reboot.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>exit <optional><replaceable>EXIT_CODE</replaceable></optional></command></term> - - <listitem> - <para>Ask the systemd manager to quit. This is only - supported for user service managers (i.e. in conjunction - with the <option>--user</option> option) or in containers - and is equivalent to <command>poweroff</command> otherwise.</para> - - <para>The systemd manager can exit with a non-zero exit - code if the optional argument - <replaceable>EXIT_CODE</replaceable> is given.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>switch-root <replaceable>ROOT</replaceable> <optional><replaceable>INIT</replaceable></optional></command></term> - - <listitem> - <para>Switches to a different root directory and executes a - new system manager process below it. This is intended for - usage in initial RAM disks ("initrd"), and will transition - from the initrd's system manager process (a.k.a. "init" - process) to the main system manager process. This call takes two - arguments: the directory that is to become the new root directory, and - the path to the new system manager binary below it to - execute as PID 1. If the latter is omitted or the empty - string, a systemd binary will automatically be searched for - and used as init. If the system manager path is omitted or - equal to the empty string, the state of the initrd's system - manager process is passed to the main system manager, which - allows later introspection of the state of the services - involved in the initrd boot.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>suspend</command></term> - - <listitem> - <para>Suspend the system. This will trigger activation of - the special <filename>suspend.target</filename> target. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>hibernate</command></term> - - <listitem> - <para>Hibernate the system. This will trigger activation of - the special <filename>hibernate.target</filename> target. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><command>hybrid-sleep</command></term> - - <listitem> - <para>Hibernate and suspend the system. This will trigger - activation of the special - <filename>hybrid-sleep.target</filename> target.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect2> - - <refsect2> - <title>Parameter Syntax</title> - - <para>Unit commands listed above take either a single unit name (designated as <replaceable>NAME</replaceable>), - or multiple unit specifications (designated as <replaceable>PATTERN</replaceable>...). In the first case, the - unit name with or without a suffix must be given. If the suffix is not specified (unit name is "abbreviated"), - systemctl will append a suitable suffix, <literal>.service</literal> by default, and a type-specific suffix in - case of commands which operate only on specific unit types. For example, - <programlisting># systemctl start sshd</programlisting> and - <programlisting># systemctl start sshd.service</programlisting> - are equivalent, as are - <programlisting># systemctl isolate default</programlisting> - and - <programlisting># systemctl isolate default.target</programlisting> - Note that (absolute) paths to device nodes are automatically converted to device unit names, and other (absolute) - paths to mount unit names. - <programlisting># systemctl status /dev/sda -# systemctl status /home</programlisting> - are equivalent to: - <programlisting># systemctl status dev-sda.device -# systemctl status home.mount</programlisting> - In the second case, shell-style globs will be matched against the primary names of all currently loaded units; - literal unit names, with or without a suffix, will be treated as in the first case. This means that literal unit - names always refer to exactly one unit, but globs may match zero units and this is not considered an - error.</para> - - <para>Glob patterns use - <citerefentry project='man-pages'><refentrytitle>fnmatch</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - so normal shell-style globbing rules are used, and - <literal>*</literal>, <literal>?</literal>, - <literal>[]</literal> may be used. See - <citerefentry project='man-pages'><refentrytitle>glob</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for more details. The patterns are matched against the primary names of - currently loaded units, and patterns which do not match anything - are silently skipped. For example: - <programlisting># systemctl stop sshd@*.service</programlisting> - will stop all <filename>sshd@.service</filename> instances. Note that alias names of units, and units that aren't - loaded are not considered for glob expansion. - </para> - - <para>For unit file commands, the specified <replaceable>NAME</replaceable> should be the name of the unit file - (possibly abbreviated, see above), or the absolute path to the unit file: - <programlisting># systemctl enable foo.service</programlisting> - or - <programlisting># systemctl link /path/to/foo.service</programlisting> - </para> - </refsect2> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure - code otherwise.</para> - </refsect1> - - <refsect1> - <title>Environment</title> - - <variablelist class='environment-variables'> - <varlistentry> - <term><varname>$SYSTEMD_EDITOR</varname></term> - - <listitem><para>Editor to use when editing units; overrides - <varname>$EDITOR</varname> and <varname>$VISUAL</varname>. If neither - <varname>$SYSTEMD_EDITOR</varname> nor <varname>$EDITOR</varname> nor - <varname>$VISUAL</varname> are present or if it is set to an empty - string or if their execution failed, systemctl will try to execute well - known editors in this order: - <citerefentry project='die-net'><refentrytitle>editor</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>nano</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>vim</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>vi</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - </variablelist> - <xi:include href="less-variables.xml" xpointer="pager"/> - <xi:include href="less-variables.xml" xpointer="less"/> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>loginctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machinectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.preset</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>glob</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-analyze.xml b/man/systemd-analyze.xml deleted file mode 100644 index bc37765dff..0000000000 --- a/man/systemd-analyze.xml +++ /dev/null @@ -1,388 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-analyze" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-analyze</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - <author> - <contrib>Developer</contrib> - <firstname>Harald</firstname> - <surname>Hoyer</surname> - <email>harald@redhat.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-analyze</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-analyze</refname> - <refpurpose>Analyze system boot-up performance</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-analyze</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg>time</arg> - </cmdsynopsis> - <cmdsynopsis> - <command>systemd-analyze</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="plain">blame</arg> - </cmdsynopsis> - <cmdsynopsis> - <command>systemd-analyze</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="plain">critical-chain</arg> - <arg choice="opt" rep="repeat"><replaceable>UNIT</replaceable></arg> - </cmdsynopsis> - <cmdsynopsis> - <command>systemd-analyze</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="plain">plot</arg> - <arg choice="opt">> file.svg</arg> - </cmdsynopsis> - <cmdsynopsis> - <command>systemd-analyze</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="plain">dot</arg> - <arg choice="opt" rep="repeat"><replaceable>PATTERN</replaceable></arg> - <arg choice="opt">> file.dot</arg> - </cmdsynopsis> - <cmdsynopsis> - <command>systemd-analyze</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="plain">dump</arg> - </cmdsynopsis> - <cmdsynopsis> - <command>systemd-analyze</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="plain">set-log-level</arg> - <arg choice="plain"><replaceable>LEVEL</replaceable></arg> - </cmdsynopsis> - <cmdsynopsis> - <command>systemd-analyze</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="plain">set-log-target</arg> - <arg choice="plain"><replaceable>TARGET</replaceable></arg> - </cmdsynopsis> - <cmdsynopsis> - <command>systemd-analyze</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="plain">verify</arg> - <arg choice="opt" rep="repeat"><replaceable>FILES</replaceable></arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-analyze</command> may be used to determine - system boot-up performance statistics and retrieve other state and - tracing information from the system and service manager, and to - verify the correctness of unit files.</para> - - <para><command>systemd-analyze time</command> prints the time - spent in the kernel before userspace has been reached, the time - spent in the initial RAM disk (initrd) before normal system - userspace has been reached, and the time normal system userspace - took to initialize. Note that these measurements simply measure - the time passed up to the point where all system services have - been spawned, but not necessarily until they fully finished - initialization or the disk is idle.</para> - - <para><command>systemd-analyze blame</command> prints a list of - all running units, ordered by the time they took to initialize. - This information may be used to optimize boot-up times. Note that - the output might be misleading as the initialization of one - service might be slow simply because it waits for the - initialization of another service to complete.</para> - - <para><command>systemd-analyze critical-chain - [<replaceable>UNIT...</replaceable>]</command> prints a tree of - the time-critical chain of units (for each of the specified - <replaceable>UNIT</replaceable>s or for the default target - otherwise). The time after the unit is active or started is - printed after the "@" character. The time the unit takes to start - is printed after the "+" character. Note that the output might be - misleading as the initialization of one service might depend on - socket activation and because of the parallel execution of - units.</para> - - <para><command>systemd-analyze plot</command> prints an SVG - graphic detailing which system services have been started at what - time, highlighting the time they spent on initialization.</para> - - <para><command>systemd-analyze dot</command> generates textual - dependency graph description in dot format for further processing - with the GraphViz - <citerefentry project='die-net'><refentrytitle>dot</refentrytitle><manvolnum>1</manvolnum></citerefentry> - tool. Use a command line like <command>systemd-analyze dot | dot - -Tsvg > systemd.svg</command> to generate a graphical dependency - tree. Unless <option>--order</option> or - <option>--require</option> is passed, the generated graph will - show both ordering and requirement dependencies. Optional pattern - globbing style specifications (e.g. <filename>*.target</filename>) - may be given at the end. A unit dependency is included in the - graph if any of these patterns match either the origin or - destination node.</para> - - <para><command>systemd-analyze dump</command> outputs a (usually - very long) human-readable serialization of the complete server - state. Its format is subject to change without notice and should - not be parsed by applications.</para> - - <para><command>systemd-analyze set-log-level - <replaceable>LEVEL</replaceable></command> changes the current log - level of the <command>systemd</command> daemon to - <replaceable>LEVEL</replaceable> (accepts the same values as - <option>--log-level=</option> described in - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>).</para> - - <para><command>systemd-analyze set-log-target - <replaceable>TARGET</replaceable></command> changes the current log - target of the <command>systemd</command> daemon to - <replaceable>TARGET</replaceable> (accepts the same values as - <option>--log-target=</option>, described in - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>).</para> - - <para><command>systemd-analyze verify</command> will load unit - files and print warnings if any errors are detected. Files - specified on the command line will be loaded, but also any other - units referenced by them. This command works by prepending the - directories for all command line arguments at the beginning of the - unit load path, which means that all units files found in those - directories will be used in preference to the unit files found in - the standard locations, even if not listed explicitly.</para> - - <para>If no command is passed, <command>systemd-analyze - time</command> is implied.</para> - - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--user</option></term> - - <listitem><para>Operates on the user systemd - instance.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--system</option></term> - - <listitem><para>Operates on the system systemd instance. This - is the implied default.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--order</option></term> - <term><option>--require</option></term> - - <listitem><para>When used in conjunction with the - <command>dot</command> command (see above), selects which - dependencies are shown in the dependency graph. If - <option>--order</option> is passed, only dependencies of type - <varname>After=</varname> or <varname>Before=</varname> are - shown. If <option>--require</option> is passed, only - dependencies of type <varname>Requires=</varname>, - <varname>Requisite=</varname>, - <varname>Wants=</varname> and <varname>Conflicts=</varname> - are shown. If neither is passed, this shows dependencies of - all these types.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--from-pattern=</option></term> - <term><option>--to-pattern=</option></term> - - <listitem><para>When used in conjunction with the - <command>dot</command> command (see above), this selects which - relationships are shown in the dependency graph. Both options - require a - <citerefentry project='die-net'><refentrytitle>glob</refentrytitle><manvolnum>7</manvolnum></citerefentry> - pattern as an argument, which will be matched against the - left-hand and the right-hand, respectively, nodes of a - relationship.</para> - - <para>Each of these can be used more than once, in which case - the unit name must match one of the values. When tests for - both sides of the relation are present, a relation must pass - both tests to be shown. When patterns are also specified as - positional arguments, they must match at least one side of the - relation. In other words, patterns specified with those two - options will trim the list of edges matched by the positional - arguments, if any are given, and fully determine the list of - edges shown otherwise.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--fuzz=</option><replaceable>timespan</replaceable></term> - - <listitem><para>When used in conjunction with the - <command>critical-chain</command> command (see above), also - show units, which finished <replaceable>timespan</replaceable> - earlier, than the latest unit in the same level. The unit of - <replaceable>timespan</replaceable> is seconds unless - specified with a different unit, e.g. - "50ms".</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--no-man</option></term> - - <listitem><para>Do not invoke man to verify the existence of - man pages listed in <varname>Documentation=</varname>. - </para></listitem> - </varlistentry> - - <xi:include href="user-system-options.xml" xpointer="host" /> - <xi:include href="user-system-options.xml" xpointer="machine" /> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - <xi:include href="standard-options.xml" xpointer="no-pager" /> - </variablelist> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <refsect1> - <title>Examples for <command>dot</command></title> - - <example> - <title>Plots all dependencies of any unit whose name starts with - <literal>avahi-daemon</literal></title> - - <programlisting>$ systemd-analyze dot 'avahi-daemon.*' | dot -Tsvg > avahi.svg - $ eog avahi.svg</programlisting> - </example> - - <example> - <title>Plots the dependencies between all known target units</title> - - <programlisting>systemd-analyze dot --to-pattern='*.target' --from-pattern='*.target' | dot -Tsvg > targets.svg -$ eog targets.svg</programlisting> - </example> - </refsect1> - - <refsect1> - <title>Examples for <command>verify</command></title> - - <para>The following errors are currently detected:</para> - <itemizedlist> - <listitem><para>unknown sections and directives, - </para></listitem> - - <listitem><para>missing dependencies which are required to start - the given unit, </para></listitem> - - <listitem><para>man pages listed in - <varname>Documentation=</varname> which are not found in the - system,</para></listitem> - - <listitem><para>commands listed in <varname>ExecStart=</varname> - and similar which are not found in the system or not - executable.</para></listitem> - </itemizedlist> - - <example> - <title>Misspelt directives</title> - - <programlisting>$ cat ./user.slice -[Unit] -WhatIsThis=11 -Documentation=man:nosuchfile(1) -Requires=different.service - -[Service] -Desription=x - -$ systemd-analyze verify ./user.slice -[./user.slice:9] Unknown lvalue 'WhatIsThis' in section 'Unit' -[./user.slice:13] Unknown section 'Service'. Ignoring. -Error: org.freedesktop.systemd1.LoadFailed: - Unit different.service failed to load: - No such file or directory. -Failed to create user.slice/start: Invalid argument -user.slice: man nosuchfile(1) command failed with code 16 - </programlisting> - </example> - - <example> - <title>Missing service units</title> - - <programlisting>$ tail ./a.socket ./b.socket -==> ./a.socket <== -[Socket] -ListenStream=100 - -==> ./b.socket <== -[Socket] -ListenStream=100 -Accept=yes - -$ systemd-analyze verify ./a.socket ./b.socket -Service a.service not loaded, a.socket cannot be started. -Service b@0.service not loaded, b.socket cannot be started. - </programlisting> - </example> - </refsect1> - - <xi:include href="less-variables.xml" /> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-ask-password.xml b/man/systemd-ask-password.xml deleted file mode 100644 index 2b6fb5a82f..0000000000 --- a/man/systemd-ask-password.xml +++ /dev/null @@ -1,227 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2011 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-ask-password" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-ask-password</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-ask-password</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-ask-password</refname> - <refpurpose>Query the user for a system password</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-ask-password <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="opt">MESSAGE</arg></command> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-ask-password</command> may be used to query - a system password or passphrase from the user, using a question - message specified on the command line. When run from a TTY it will - query a password on the TTY and print it to standard output. When - run with no TTY or with <option>--no-tty</option> it will query - the password system-wide and allow active users to respond via - several agents. The latter is only available to privileged - processes.</para> - - <para>The purpose of this tool is to query system-wide passwords - — that is passwords not attached to a specific user account. - Examples include: unlocking encrypted hard disks when they are - plugged in or at boot, entering an SSL certificate passphrase for - web and VPN servers.</para> - - <para>Existing agents are: - <itemizedlist> - - <listitem><para>A boot-time password agent asking the user for - passwords using Plymouth</para></listitem> - - <listitem><para>A boot-time password agent querying the user - directly on the console</para></listitem> - - <listitem><para>An agent requesting password input via a - <citerefentry - project='man-pages'><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry> - message</para></listitem> - - <listitem><para>A command line agent which can be started - temporarily to process queued password - requests</para></listitem> - - <listitem><para>A TTY agent that is temporarily spawned during - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - invocations</para></listitem> - </itemizedlist></para> - - <para>Additional password agents may be implemented according to - the <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/PasswordAgents">systemd - Password Agent Specification</ulink>.</para> - - <para>If a password is queried on a TTY, the user may press TAB to - hide the asterisks normally shown for each character typed. - Pressing Backspace as first key achieves the same effect.</para> - - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--icon=</option></term> - - <listitem><para>Specify an icon name alongside the password - query, which may be used in all agents supporting graphical - display. The icon name should follow the <ulink - url="http://standards.freedesktop.org/icon-naming-spec/icon-naming-spec-latest.html">XDG - Icon Naming Specification</ulink>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--id=</option></term> - <listitem><para>Specify an identifier for this password - query. This identifier is freely choosable and allows - recognition of queries by involved agents. It should include - the subsystem doing the query and the specific object the - query is done for. Example: - <literal>--id=cryptsetup:/dev/sda5</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--keyname=</option></term> - <listitem><para>Configure a kernel keyring key name to use as - cache for the password. If set, then the tool will try to push - any collected passwords into the kernel keyring of the root - user, as a key of the specified name. If combined with - <option>--accept-cached</option>, it will also try to retrieve - such cached passwords from the key in the kernel keyring - instead of querying the user right away. By using this option, - the kernel keyring may be used as effective cache to avoid - repeatedly asking users for passwords, if there are multiple - objects that may be unlocked with the same password. The - cached key will have a timeout of 2.5min set, after which it - will be purged from the kernel keyring. Note that it is - possible to cache multiple passwords under the same keyname, - in which case they will be stored as NUL-separated list of - passwords. Use - <citerefentry project='die-net'><refentrytitle>keyctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - to access the cached key via the kernel keyring - directly. Example: <literal>--keyname=cryptsetup</literal></para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--timeout=</option></term> - - <listitem><para>Specify the query timeout in seconds. Defaults - to 90s. A timeout of 0 waits indefinitely. </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--echo</option></term> - - <listitem><para>Echo the user input instead of masking it. - This is useful when using - <filename>systemd-ask-password</filename> to query for - usernames. </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--no-tty</option></term> - - <listitem><para>Never ask for password on current TTY even if - one is available. Always use agent system.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--accept-cached</option></term> - - <listitem><para>If passed, accept cached passwords, i.e. - passwords previously entered.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--multiple</option></term> - - <listitem><para>When used in conjunction with - <option>--accept-cached</option> accept multiple passwords. - This will output one password per line.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--no-output</option></term> - - <listitem><para>Do not print passwords to standard output. - This is useful if you want to store a password in kernel - keyring with <option>--keyname</option> but do not want it - to show up on screen or in logs.</para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - </variablelist> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>keyctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>plymouth</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-backlight@.service.xml b/man/systemd-backlight@.service.xml deleted file mode 100644 index 3459ed8851..0000000000 --- a/man/systemd-backlight@.service.xml +++ /dev/null @@ -1,94 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2013 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-backlight@.service" conditional='ENABLE_BACKLIGHT'> - - <refentryinfo> - <title>systemd-backlight@.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-backlight@.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-backlight@.service</refname> - <refname>systemd-backlight</refname> - <refpurpose>Load and save the display backlight brightness at boot and shutdown</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-backlight@.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-backlight</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-backlight@.service</filename> is a service - that restores the display backlight brightness at early boot and - saves it at shutdown. On disk, the backlight brightness is stored - in <filename>/var/lib/systemd/backlight/</filename>. During - loading, if the udev property <option>ID_BACKLIGHT_CLAMP</option> is - not set to false, the brightness is clamped to a value of at - least 1 or 5% of maximum brightness, whichever is greater. This - restriction will be removed when the kernel allows user space to - reliably set a brightness value which does not turn off the - display.</para> - </refsect1> - - <refsect1> - <title>Kernel Command Line</title> - - <para><filename>systemd-backlight</filename> understands the - following kernel command line parameter:</para> - - <variablelist class='kernel-commandline-options'> - <varlistentry> - <term><varname>systemd.restore_state=</varname></term> - - <listitem><para>Takes a boolean argument. Defaults to - <literal>1</literal>. If <literal>0</literal>, does not - restore the backlight settings on boot. However, settings will - still be stored on shutdown. </para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-binfmt.service.xml b/man/systemd-binfmt.service.xml deleted file mode 100644 index cccfb49ca9..0000000000 --- a/man/systemd-binfmt.service.xml +++ /dev/null @@ -1,75 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-binfmt.service" conditional='ENABLE_BINFMT'> - - <refentryinfo> - <title>systemd-binfmt.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-binfmt.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-binfmt.service</refname> - <refname>systemd-binfmt</refname> - <refpurpose>Configure additional binary formats for executables at boot</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-binfmt.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-binfmt</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-binfmt.service</filename> is an early boot - service that registers additional binary formats for executables - in the kernel.</para> - - <para>See - <citerefentry><refentrytitle>binfmt.d</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for information about the configuration of this service.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>binfmt.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>wine</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-cat.xml b/man/systemd-cat.xml deleted file mode 100644 index 160db9fb5c..0000000000 --- a/man/systemd-cat.xml +++ /dev/null @@ -1,178 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-cat" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-cat</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-cat</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-cat</refname> - <refpurpose>Connect a pipeline or program's output with the journal</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-cat <arg choice="opt" rep="repeat">OPTIONS</arg> <arg>COMMAND</arg> <arg choice="opt" rep="repeat">ARGUMENTS</arg></command> - </cmdsynopsis> - <cmdsynopsis> - <command>systemd-cat <arg choice="opt" rep="repeat">OPTIONS</arg></command> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-cat</command> may be used to connect the - standard input and output of a process to the journal, or as a - filter tool in a shell pipeline to pass the output the previous - pipeline element generates to the journal.</para> - - <para>If no parameter is passed, <command>systemd-cat</command> - will write everything it reads from standard input (stdin) to the - journal.</para> - - <para>If parameters are passed, they are executed as command line - with standard output (stdout) and standard error output (stderr) - connected to the journal, so that all it writes is stored in the - journal.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - - <varlistentry> - <term><option>-t</option></term> - <term><option>--identifier=</option></term> - - <listitem><para>Specify a short string that is used to - identify the logging tool. If not specified, no identification - string is written to the journal.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-p</option></term> - <term><option>--priority=</option></term> - - <listitem><para>Specify the default priority level for the - logged messages. Pass one of - <literal>emerg</literal>, - <literal>alert</literal>, - <literal>crit</literal>, - <literal>err</literal>, - <literal>warning</literal>, - <literal>notice</literal>, - <literal>info</literal>, - <literal>debug</literal>, or a - value between 0 and 7 (corresponding to the same named - levels). These priority values are the same as defined by - <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - Defaults to <literal>info</literal>. Note that this simply - controls the default, individual lines may be logged with - different levels if they are prefixed accordingly. For details, - see <option>--level-prefix=</option> below.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--level-prefix=</option></term> - - <listitem><para>Controls whether lines read are parsed for - syslog priority level prefixes. If enabled (the default), a - line prefixed with a priority prefix such as - <literal><5></literal> is logged at priority 5 - (<literal>notice</literal>), and similar for the other - priority levels. Takes a boolean argument.</para></listitem> - </varlistentry> - - </variablelist> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <refsect1> - <title>Examples</title> - - <example> - <title>Invoke a program</title> - - <para>This calls <filename noindex='true'>/bin/ls</filename> - with standard output and error connected to the journal:</para> - - <programlisting># systemd-cat ls</programlisting> - </example> - - <example> - <title>Usage in a shell pipeline</title> - - <para>This builds a shell pipeline also invoking - <filename>/bin/ls</filename> and writes the output it generates - to the journal:</para> - - <programlisting># ls | systemd-cat</programlisting> - </example> - - <para>Even though the two examples have very similar effects the - first is preferable since only one process is running at a time, - and both stdout and stderr are captured while in the second - example, only stdout is captured.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>logger</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-cgls.xml b/man/systemd-cgls.xml deleted file mode 100644 index e8f0368f48..0000000000 --- a/man/systemd-cgls.xml +++ /dev/null @@ -1,139 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-cgls" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-cgls</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-cgls</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-cgls</refname> - <refpurpose>Recursively show control group contents</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-cgls</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="opt" rep="repeat">CGROUP</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-cgls</command> recursively shows the - contents of the selected Linux control group hierarchy in a tree. - If arguments are specified, shows all member processes of the - specified control groups plus all their subgroups and their - members. The control groups may either be specified by their full - file paths or are assumed in the systemd control group hierarchy. - If no argument is specified and the current working directory is - beneath the control group mount point - <filename>/sys/fs/cgroup</filename>, shows the contents of the - control group the working directory refers to. Otherwise, the full - systemd control group hierarchy is shown.</para> - - <para>By default, empty control groups are not shown.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--all</option></term> - - <listitem><para>Do not hide empty control groups in the - output.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-l</option></term> - <term><option>--full</option></term> - - <listitem><para>Do not ellipsize process tree members.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-k</option></term> - - <listitem><para>Include kernel threads in output. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-M <replaceable>MACHINE</replaceable></option></term> - <term><option>--machine=<replaceable>MACHINE</replaceable></option></term> - - <listitem><para>Limit control groups shown to the part - corresponding to the container - <replaceable>MACHINE</replaceable>.</para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - <xi:include href="standard-options.xml" xpointer="no-pager" /> - </variablelist> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-cgtop</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>ps</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-cgtop.xml b/man/systemd-cgtop.xml deleted file mode 100644 index c76f646984..0000000000 --- a/man/systemd-cgtop.xml +++ /dev/null @@ -1,373 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-cgtop" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-cgtop</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-cgtop</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-cgtop</refname> - <refpurpose>Show top control groups by their resource usage</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-cgtop</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-cgtop</command> shows the top control - groups of the local Linux control group hierarchy, ordered by - their CPU, memory, or disk I/O load. The display is refreshed in - regular intervals (by default every 1s), similar in style to - <citerefentry project='man-pages'><refentrytitle>top</refentrytitle><manvolnum>1</manvolnum></citerefentry>.</para> - - <para>If <command>systemd-cgtop</command> is not connected to a - tty, no column headers are printed and the default is to only run - one iteration. The <varname>--iterations=</varname> argument, if - given, is honored. This mode is suitable for scripting.</para> - - <para>Resource usage is only accounted for control groups in the - relevant hierarchy, i.e. CPU usage is only accounted for control - groups in the <literal>cpuacct</literal> hierarchy, memory usage - only for those in <literal>memory</literal> and disk I/O usage for - those in <literal>blkio</literal>. If resource monitoring for - these resources is required, it is recommended to add the - <varname>CPUAccounting=1</varname>, - <varname>MemoryAccounting=1</varname> and - <varname>BlockIOAccounting=1</varname> settings in the unit files - in question. See - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para> - - <para>The CPU load value can be between 0 and 100 times the number of - processors the system has. For example, if the system has 8 processors, - the CPU load value is going to be between 0% and 800%. The number of - processors can be found in <literal>/proc/cpuinfo</literal>.</para> - - <para>To emphasize this: unless - <literal>CPUAccounting=1</literal>, - <literal>MemoryAccounting=1</literal> and - <literal>BlockIOAccounting=1</literal> are enabled for the - services in question, no resource accounting will be available for - system services and the data shown by - <command>systemd-cgtop</command> will be incomplete.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>-p</option></term> - <term><option>--order=path</option></term> - - <listitem><para>Order by control group - path name.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-t</option></term> - <term><option>--order=tasks</option></term> - - <listitem><para>Order by number of tasks/processes in the control group.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-c</option></term> - <term><option>--order=cpu</option></term> - - <listitem><para>Order by CPU load.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-m</option></term> - <term><option>--order=memory</option></term> - - <listitem><para>Order by memory usage.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-i</option></term> - <term><option>--order=io</option></term> - - <listitem><para>Order by disk I/O load.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-b</option></term> - <term><option>--batch</option></term> - - <listitem><para>Run in "batch" mode: do not accept input and - run until the iteration limit set with - <option>--iterations=</option> is exhausted or until killed. - This mode could be useful for sending output from - <command>systemd-cgtop</command> to other programs or to a - file.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-r</option></term> - <term><option>--raw</option></term> - - <listitem><para>Format byte counts (as in memory usage and I/O metrics) - with raw numeric values rather than human-readable - numbers.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--cpu=percentage</option></term> - <term><option>--cpu=time</option></term> - - <listitem><para>Controls whether the CPU usage is shown as - percentage or time. By default, the CPU usage is shown as - percentage. This setting may also be toggled at runtime by - pressing the <keycap>%</keycap> key.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-P</option></term> - - <listitem><para>Count only userspace processes instead of all - tasks. By default, all tasks are counted: each kernel thread - and each userspace thread individually. With this setting, - kernel threads are excluded from the counting and each - userspace process only counts as one, regardless how many - threads it consists of. This setting may also be toggled at - runtime by pressing the <keycap>P</keycap> key. This option - may not be combined with - <option>-k</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-k</option></term> - - <listitem><para>Count only userspace processes and kernel - threads instead of all tasks. By default, all tasks are - counted: each kernel thread and each userspace thread - individually. With this setting, kernel threads are included in - the counting and each userspace process only counts as on one, - regardless how many threads it consists of. This setting may - also be toggled at runtime by pressing the <keycap>k</keycap> - key. This option may not be combined with - <option>-P</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--recursive=</option></term> - - <listitem><para>Controls whether the number of processes shown - for a control group shall include all processes that are - contained in any of the child control groups as well. Takes a - boolean argument, which defaults to <literal>yes</literal>. If - enabled, the processes in child control groups are included, if - disabled, only the processes in the control group itself are - counted. This setting may also be toggled at runtime by - pressing the <keycap>r</keycap> key. Note that this setting - only applies to process counting, i.e. when the - <option>-P</option> or <option>-k</option> options are - used. It has not effect if all tasks are counted, in which - case the counting is always recursive.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-n</option></term> - <term><option>--iterations=</option></term> - - <listitem><para>Perform only this many iterations. A value of - 0 indicates that the program should run - indefinitely.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-d</option></term> - <term><option>--delay=</option></term> - - <listitem><para>Specify refresh delay in seconds (or if one of - <literal>ms</literal>, <literal>us</literal>, - <literal>min</literal> is specified as unit in this time - unit). This setting may also be increased and decreased at - runtime by pressing the <keycap>+</keycap> and - <keycap>-</keycap> keys.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--depth=</option></term> - - <listitem><para>Maximum control group tree traversal depth. - Specifies how deep <command>systemd-cgtop</command> shall - traverse the control group hierarchies. If 0 is specified, - only the root group is monitored. For 1, only the first level - of control groups is monitored, and so on. Defaults to - 3.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-M <replaceable>MACHINE</replaceable></option></term> - <term><option>--machine=<replaceable>MACHINE</replaceable></option></term> - - <listitem><para>Limit control groups shown to the part - corresponding to the container - <replaceable>MACHINE</replaceable>.</para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - - </refsect1> - - <refsect1> - <title>Keys</title> - - <para><command>systemd-cgtop</command> is an interactive tool and - may be controlled via user input using the following keys:</para> - - <variablelist> - <varlistentry> - <term><keycap>h</keycap></term> - - <listitem><para>Shows a short help text.</para></listitem> - </varlistentry> - - <varlistentry> - <term><keycap function="space"/></term> - - <listitem><para>Immediately refresh output.</para></listitem> - </varlistentry> - - <varlistentry> - <term><keycap>q</keycap></term> - - <listitem><para>Terminate the program.</para></listitem> - </varlistentry> - - <varlistentry> - <term><keycap>p</keycap></term> - <term><keycap>t</keycap></term> - <term><keycap>c</keycap></term> - <term><keycap>m</keycap></term> - <term><keycap>i</keycap></term> - - <listitem><para>Sort the control groups by path, number of - tasks, CPU load, memory usage, or I/O load, respectively. This - setting may also be controlled using the - <option>--order=</option> command line - switch.</para></listitem> - </varlistentry> - - <varlistentry> - <term><keycap>%</keycap></term> - - <listitem><para>Toggle between showing CPU time as time or - percentage. This setting may also be controlled using the - <option>--cpu=</option> command line switch.</para></listitem> - </varlistentry> - - <varlistentry> - <term><keycap>+</keycap></term> - <term><keycap>-</keycap></term> - - <listitem><para>Increase or decrease refresh delay, - respectively. This setting may also be controlled using the - <option>--delay=</option> command line - switch.</para></listitem> - </varlistentry> - - <varlistentry> - <term><keycap>P</keycap></term> - - <listitem><para>Toggle between counting all tasks, or only - userspace processes. This setting may also be controlled using - the <option>-P</option> command line switch (see - above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><keycap>k</keycap></term> - - <listitem><para>Toggle between counting all tasks, or only - userspace processes and kernel threads. This setting may also - be controlled using the <option>-k</option> command line - switch (see above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><keycap>r</keycap></term> - - <listitem><para>Toggle between recursively including or - excluding processes in child control groups in control group - process counts. This setting may also be controlled using the - <option>--recursive=</option> command line switch. This key is - not available if all tasks are counted, it is only available - if processes are counted, as enabled with the - <keycap>P</keycap> or <keycap>k</keycap> - keys.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-cgls</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>top</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-coredump.xml b/man/systemd-coredump.xml deleted file mode 100644 index a28dc62e5a..0000000000 --- a/man/systemd-coredump.xml +++ /dev/null @@ -1,145 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-coredump" conditional='ENABLE_COREDUMP' - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-coredump</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-coredump</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-coredump</refname> - <refname>systemd-coredump.socket</refname> - <refname>systemd-coredump@.service</refname> - <refpurpose>Acquire, save and process core dumps</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/usr/lib/systemd/systemd-coredump</filename></para> - <para><filename>systemd-coredump@.service</filename></para> - <para><filename>systemd-coredump.socket</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - <para><command>systemd-coredump</command> is a system service that can acquire core dumps - from the kernel and handle them in various ways.</para> - - <para>Core dumps can be written to the journal or saved as a file. Once saved they can be retrieved - for further processing, for example in - <citerefentry project='man-pages'><refentrytitle>gdb</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - </para> - - <para>By default, <command>systemd-coredump</command> will log the core dump including a backtrace - if possible to the journal and store the core dump itself in an external file in - <filename>/var/lib/systemd/coredump</filename>.</para> - - <para>When the kernel invokes <command>systemd-coredump</command> to handle a core dump, - it will connect to the socket created by the <filename>systemd-coredump.socket</filename> - unit, which in turn will spawn a <filename>systemd-coredump@.service</filename> instance - to process the core dump. Hence <filename>systemd-coredump.socket</filename> - and <filename>systemd-coredump@.service</filename> are helper units which do the actual - processing of core dumps and are subject to normal service management.</para> - - <para>The behavior of a specific program upon reception of a signal is governed by a few - factors which are described in detail in - <citerefentry project='man-pages'><refentrytitle>core</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - In particular, the core dump will only be processed when the related resource limits are sufficient. - </para> - </refsect1> - - <refsect1> - <title>Configuration</title> - <para>For programs started by <command>systemd</command> process resource limits can be set by directive - <varname>LimitCore=</varname>, see - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para> - - <para>In order to be used <command>systemd-coredump</command> must be configured in - <citerefentry project='man-pages'><refentrytitle>sysctl</refentrytitle><manvolnum>8</manvolnum></citerefentry> - parameter <varname>kernel.core_pattern</varname>. The syntax of this parameter is explained in - <citerefentry project='man-pages'><refentrytitle>core</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - Systemd installs the file <filename>/usr/lib/sysctl.d/50-coredump.conf</filename> which configures - <varname>kernel.core_pattern</varname> accordingly. This file may be masked or overridden to use a different - setting following normal - <citerefentry><refentrytitle>sysctl.d</refentrytitle><manvolnum>5</manvolnum></citerefentry> - rules. - If the sysctl configuration is modified, it must be updated in the kernel before - it takes effect, see - <citerefentry project='man-pages'><refentrytitle>sysctl</refentrytitle><manvolnum>8</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd-sysctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - </para> - - <para>The behaviour of <command>systemd-coredump</command> itself is configured through the configuration file - <filename>/etc/systemd/coredump.conf</filename> and corresponding snippets - <filename>/etc/systemd/coredump.conf.d/*.conf</filename>, see - <citerefentry><refentrytitle>coredump.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>. A new - instance of <command>systemd-coredump</command> is invoked upon receiving every core dump. Therefore, changes - in these files will take effect the next time a core dump is received.</para> - - <para>Resources used by core dump files are restricted in two ways. Parameters like maximum size of acquired - core dumps and files can be set in files <filename>/etc/systemd/coredump.conf</filename> and snippets mentioned - above. In addition the storage time of core dump files is restricted by <command>systemd-tmpfiles</command>, - corresponding settings are by default in <filename>/usr/lib/tmpfiles.d/systemd.conf</filename>.</para> - </refsect1> - - <refsect1> - <title>Usage</title> - <para>Data stored in the journal can be viewed with - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - as usual. - <citerefentry><refentrytitle>coredumpctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - can be used to retrieve saved core dumps independent of their location, to display information and to process - them e.g. by passing to the GNU debugger (gdb).</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>coredump.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>coredumpctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-tmpfiles</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>core</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sysctl.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-sysctl.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - </para> - </refsect1> -</refentry> diff --git a/man/systemd-cryptsetup-generator.xml b/man/systemd-cryptsetup-generator.xml deleted file mode 100644 index f036ab9744..0000000000 --- a/man/systemd-cryptsetup-generator.xml +++ /dev/null @@ -1,193 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-cryptsetup-generator" conditional='HAVE_LIBCRYPTSETUP'> - - <refentryinfo> - <title>systemd-cryptsetup-generator</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-cryptsetup-generator</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-cryptsetup-generator</refname> - <refpurpose>Unit generator for <filename>/etc/crypttab</filename></refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/usr/lib/systemd/system-generators/systemd-cryptsetup-generator</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-cryptsetup-generator</filename> is a - generator that translates <filename>/etc/crypttab</filename> into - native systemd units early at boot and when configuration of the - system manager is reloaded. This will create - <citerefentry><refentrytitle>systemd-cryptsetup@.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - units as necessary.</para> - - <para><filename>systemd-cryptsetup-generator</filename> implements - <citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>Kernel Command Line</title> - - <para><filename>systemd-cryptsetup-generator</filename> - understands the following kernel command line parameters:</para> - - <variablelist class='kernel-commandline-options'> - <varlistentry> - <term><varname>luks=</varname></term> - <term><varname>rd.luks=</varname></term> - - <listitem><para>Takes a boolean argument. Defaults to - <literal>yes</literal>. If <literal>no</literal>, disables the - generator entirely. <varname>rd.luks=</varname> is honored - only by initial RAM disk (initrd) while - <varname>luks=</varname> is honored by both the main system - and the initrd. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>luks.crypttab=</varname></term> - <term><varname>rd.luks.crypttab=</varname></term> - - <listitem><para>Takes a boolean argument. Defaults to - <literal>yes</literal>. If <literal>no</literal>, causes the - generator to ignore any devices configured in - <filename>/etc/crypttab</filename> - (<varname>luks.uuid=</varname> will still work however). - <varname>rd.luks.crypttab=</varname> is honored only by - initial RAM disk (initrd) while - <varname>luks.crypttab=</varname> is honored by both the main - system and the initrd. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>luks.uuid=</varname></term> - <term><varname>rd.luks.uuid=</varname></term> - - <listitem><para>Takes a LUKS superblock UUID as argument. This - will activate the specified device as part of the boot process - as if it was listed in <filename>/etc/crypttab</filename>. - This option may be specified more than once in order to set up - multiple devices. <varname>rd.luks.uuid=</varname> is honored - only by initial RAM disk (initrd) while - <varname>luks.uuid=</varname> is honored by both the main - system and the initrd.</para> - <para>If /etc/crypttab contains entries with the same UUID, - then the name, keyfile and options specified there will be - used. Otherwise, the device will have the name - <literal>luks-UUID</literal>.</para> - <para>If /etc/crypttab exists, only those UUIDs - specified on the kernel command line - will be activated in the initrd or the real root.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>luks.name=</varname></term> - <term><varname>rd.luks.name=</varname></term> - - <listitem><para>Takes a LUKS super block UUID followed by an - <literal>=</literal> and a name. This implies - <varname>rd.luks.uuid=</varname> or - <varname>luks.uuid=</varname> and will additionally make the - LUKS device given by the UUID appear under the provided - name.</para> - - <para><varname>rd.luks.name=</varname> is honored only by - initial RAM disk (initrd) while <varname>luks.name=</varname> - is honored by both the main system and the initrd.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>luks.options=</varname></term> - <term><varname>rd.luks.options=</varname></term> - - <listitem><para>Takes a LUKS super block UUID followed by an - <literal>=</literal> and a string of options separated by - commas as argument. This will override the options for the - given UUID.</para> - <para>If only a list of options, without an UUID, is - specified, they apply to any UUIDs not specified elsewhere, - and without an entry in - <filename>/etc/crypttab</filename>.</para><para> - <varname>rd.luks.options=</varname> is honored only by initial - RAM disk (initrd) while <varname>luks.options=</varname> is - honored by both the main system and the initrd.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>luks.key=</varname></term> - <term><varname>rd.luks.key=</varname></term> - - <listitem><para>Takes a password file name as argument or a - LUKS super block UUID followed by a <literal>=</literal> and a - password file name.</para> - - <para>For those entries specified with - <varname>rd.luks.uuid=</varname> or - <varname>luks.uuid=</varname>, the password file will be set - to the one specified by <varname>rd.luks.key=</varname> or - <varname>luks.key=</varname> of the corresponding UUID, or the - password file that was specified without a UUID.</para> - <para><varname>rd.luks.key=</varname> - is honored only by initial RAM disk - (initrd) while - <varname>luks.key=</varname> is - honored by both the main system and - the initrd.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>crypttab</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-cryptsetup@.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-cryptsetup@.service.xml b/man/systemd-cryptsetup@.service.xml deleted file mode 100644 index ea524851eb..0000000000 --- a/man/systemd-cryptsetup@.service.xml +++ /dev/null @@ -1,85 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-cryptsetup@.service" conditional='HAVE_LIBCRYPTSETUP'> - - <refentryinfo> - <title>systemd-cryptsetup@.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-cryptsetup@.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-cryptsetup@.service</refname> - <refname>systemd-cryptsetup</refname> - <refpurpose>Full disk decryption logic</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-cryptsetup@.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-cryptsetup</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-cryptsetup@.service</filename> is a - service responsible for setting up encrypted block devices. It is - instantiated for each device that requires decryption for - access.</para> - - <para><filename>systemd-cryptsetup@.service</filename> will ask - for hard disk passwords via the <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/PasswordAgents"> - password agent logic</ulink>, in order to query the user for the - password using the right mechanism at boot and during - runtime.</para> - - <para>At early boot and when the system manager configuration is - reloaded this <filename>/etc/crypttab</filename> is translated - into <filename>systemd-cryptsetup@.service</filename> units by - <citerefentry><refentrytitle>systemd-cryptsetup-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-cryptsetup-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>crypttab</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-debug-generator.xml b/man/systemd-debug-generator.xml deleted file mode 100644 index 5c5e9fc4a1..0000000000 --- a/man/systemd-debug-generator.xml +++ /dev/null @@ -1,95 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2014 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-debug-generator"> - - <refentryinfo> - <title>systemd-debug-generator</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-debug-generator</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-debug-generator</refname> - <refpurpose>Generator for enabling a runtime debug shell and - masking specific units at boot</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/usr/lib/systemd/system-generators/systemd-debug-generator</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-debug-generator</filename> is a generator - that reads the kernel command line and understands three - options:</para> - - <para>If the <option>systemd.mask=</option> option is specified - and followed by a unit name, this unit is masked for the runtime, - similar to the effect of - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s - <command>mask</command> command. This is useful to boot with - certain units removed from the initial boot transaction for - debugging system startup. May be specified more than once.</para> - - <para>If the <option>systemd.wants=</option> option is specified - and followed by a unit name, a start job for this unit is added to - the initial transaction. This is useful to start one or more - additional units at boot. May be specified more than once.</para> - - <para>If the <option>systemd.debug-shell</option> option is - specified, the debug shell service - <literal>debug-shell.service</literal> is pulled into the boot - transaction. It will spawn a debug shell on tty9 during early - system startup. Note that the shell may also be turned on - persistently by enabling it with - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s - <command>enable</command> command.</para> - - <para><filename>systemd-debug-generator</filename> implements - <citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>kernel-command-line</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-delta.xml b/man/systemd-delta.xml deleted file mode 100644 index 99709604aa..0000000000 --- a/man/systemd-delta.xml +++ /dev/null @@ -1,205 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-delta" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-delta</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-delta</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-delta</refname> - <refpurpose>Find overridden configuration files</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-delta</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="opt" rep="repeat"><replaceable>PREFIX</replaceable><optional>/<replaceable>SUFFIX</replaceable></optional>|<replaceable>SUFFIX</replaceable></arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-delta</command> may be used to identify and - compare configuration files that override other configuration - files. Files in <filename>/etc</filename> have highest priority, - files in <filename>/run</filename> have the second highest - priority, ..., files in <filename>/lib</filename> have lowest - priority. Files in a directory with higher priority override files - with the same name in directories of lower priority. In addition, - certain configuration files can have <literal>.d</literal> - directories which contain "drop-in" files with configuration - snippets which augment the main configuration file. "Drop-in" - files can be overridden in the same way by placing files with the - same name in a directory of higher priority (except that, in case - of "drop-in" files, both the "drop-in" file name and the name of - the containing directory, which corresponds to the name of the - main configuration file, must match). For a fuller explanation, - see - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para> - - <para>The command line argument will be split into a prefix and a - suffix. Either is optional. The prefix must be one of the - directories containing configuration files - (<filename>/etc</filename>, <filename>/run</filename>, - <filename>/usr/lib</filename>, ...). If it is given, only - overriding files contained in this directory will be shown. - Otherwise, all overriding files will be shown. The suffix must be - a name of a subdirectory containing configuration files like - <filename>tmpfiles.d</filename>, <filename>sysctl.d</filename> or - <filename>systemd/system</filename>. If it is given, only - configuration files in this subdirectory (across all configuration - paths) will be analyzed. Otherwise, all configuration files will - be analyzed. If the command line argument is not given at all, all - configuration files will be analyzed. See below for some - examples.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>-t</option></term> - <term><option>--type=</option></term> - - <listitem><para>When listing the differences, only list those - that are asked for. The list itself is a comma-separated list - of desired difference types.</para> - - <para>Recognized types are: - - <variablelist> - <varlistentry> - <term><varname>masked</varname></term> - - <listitem><para>Show masked files</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>equivalent</varname></term> - - <listitem><para>Show overridden files that while - overridden, do not differ in content.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>redirected</varname></term> - - <listitem><para>Show files that are redirected to - another.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>overridden</varname></term> - - <listitem><para>Show overridden, and changed - files.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>extended</varname></term> - - <listitem><para>Show <filename>*.conf</filename> files - in drop-in directories for units.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>unchanged</varname></term> - - <listitem><para>Show unmodified files - too.</para></listitem> - </varlistentry> - </variablelist> - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--diff=</option></term> - - <listitem><para>When showing modified files, when a file is - overridden show a diff as well. This option takes a boolean - argument. If omitted, it defaults to - <option>true</option>.</para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - <xi:include href="standard-options.xml" xpointer="no-pager" /> - </variablelist> - </refsect1> - - <refsect1> - <title>Examples</title> - - <para>To see all local configuration:</para> - <programlisting>systemd-delta</programlisting> - - <para>To see all runtime configuration:</para> - <programlisting>systemd-delta /run</programlisting> - - <para>To see all system unit configuration changes:</para> - <programlisting>systemd-delta systemd/system</programlisting> - - <para>To see all runtime "drop-in" changes for system units:</para> - <programlisting>systemd-delta --type=extended /run/systemd/system</programlisting> - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-detect-virt.xml b/man/systemd-detect-virt.xml deleted file mode 100644 index 2b7f4e69ab..0000000000 --- a/man/systemd-detect-virt.xml +++ /dev/null @@ -1,245 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-detect-virt" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-detect-virt</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-detect-virt</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-detect-virt</refname> - <refpurpose>Detect execution in a virtualized environment</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-detect-virt <arg choice="opt" rep="repeat">OPTIONS</arg></command> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-detect-virt</command> detects execution in - a virtualized environment. It identifies the virtualization - technology and can distinguish full machine virtualization from - container virtualization. <filename>systemd-detect-virt</filename> - exits with a return value of 0 (success) if a virtualization - technology is detected, and non-zero (error) otherwise. By default, - any type of virtualization is detected, and the options - <option>--container</option> and <option>--vm</option> can be used - to limit what types of virtualization are detected.</para> - - <para>When executed without <option>--quiet</option> will print a - short identifier for the detected virtualization technology. The - following technologies are currently identified:</para> - - <table> - <title>Known virtualization technologies (both - VM, i.e. full hardware virtualization, - and container, i.e. shared kernel virtualization)</title> - <tgroup cols='3' align='left' colsep='1' rowsep='1'> - <colspec colname="type" /> - <colspec colname="id" /> - <colspec colname="product" /> - <thead> - <row> - <entry>Type</entry> - <entry>ID</entry> - <entry>Product</entry> - </row> - </thead> - <tbody> - <row> - <entry valign="top" morerows="9">VM</entry> - <entry><varname>qemu</varname></entry> - <entry>QEMU software virtualization</entry> - </row> - - <row> - <entry><varname>kvm</varname></entry> - <entry>Linux KVM kernel virtual machine</entry> - </row> - - <row> - <entry><varname>zvm</varname></entry> - <entry>s390 z/VM</entry> - </row> - - <row> - <entry><varname>vmware</varname></entry> - <entry>VMware Workstation or Server, and related products</entry> - </row> - - <row> - <entry><varname>microsoft</varname></entry> - <entry>Hyper-V, also known as Viridian or Windows Server Virtualization</entry> - </row> - - <row> - <entry><varname>oracle</varname></entry> - <entry>Oracle VM VirtualBox (historically marketed by innotek and Sun Microsystems)</entry> - </row> - - <row> - <entry><varname>xen</varname></entry> - <entry>Xen hypervisor (only domU, not dom0)</entry> - </row> - - <row> - <entry><varname>bochs</varname></entry> - <entry>Bochs Emulator</entry> - </row> - - <row> - <entry><varname>uml</varname></entry> - <entry>User-mode Linux</entry> - </row> - - <row> - <entry><varname>parallels</varname></entry> - <entry>Parallels Desktop, Parallels Server</entry> - </row> - - <row> - <entry valign="top" morerows="5">Container</entry> - <entry><varname>openvz</varname></entry> - <entry>OpenVZ/Virtuozzo</entry> - </row> - - <row> - <entry><varname>lxc</varname></entry> - <entry>Linux container implementation by LXC</entry> - </row> - - <row> - <entry><varname>lxc-libvirt</varname></entry> - <entry>Linux container implementation by libvirt</entry> - </row> - - <row> - <entry><varname>systemd-nspawn</varname></entry> - <entry>systemd's minimal container implementation, see <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry></entry> - </row> - - <row> - <entry><varname>docker</varname></entry> - <entry>Docker container manager</entry> - </row> - - <row> - <entry><varname>rkt</varname></entry> - <entry>rkt app container runtime</entry> - </row> - </tbody> - </tgroup> - </table> - - <para>If multiple virtualization solutions are used, only the - "innermost" is detected and identified. That means if both - machine and container virtualization are used in - conjunction, only the latter will be identified (unless - <option>--vm</option> is passed).</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>-c</option></term> - <term><option>--container</option></term> - - <listitem><para>Only detects container virtualization (i.e. - shared kernel virtualization).</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-v</option></term> - <term><option>--vm</option></term> - - <listitem><para>Only detects hardware virtualization).</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-r</option></term> - <term><option>--chroot</option></term> - - <listitem><para>Detect whether invoked in a - <citerefentry><refentrytitle>chroot</refentrytitle><manvolnum>2</manvolnum></citerefentry> - environment. In this mode, no output is written, but the return - value indicates whether the process was invoked in a - <function>chroot()</function> - environment or not.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-q</option></term> - <term><option>--quiet</option></term> - - <listitem><para>Suppress output of the virtualization - technology identifier.</para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>If a virtualization technology is detected, 0 is returned, a - non-zero code otherwise.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>chroot</refentrytitle><manvolnum>2</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-escape.xml b/man/systemd-escape.xml deleted file mode 100644 index dbb3869a24..0000000000 --- a/man/systemd-escape.xml +++ /dev/null @@ -1,178 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-escape" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-escape</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-escape</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-escape</refname> - <refpurpose>Escape strings for usage in system unit names</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-escape</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="opt" rep="repeat">STRING</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-escape</command> may be used to escape - strings for inclusion in systemd unit names. The command may be - used to escape and to undo escaping of strings.</para> - - <para>The command takes any number of strings on the command line, - and will process them individually, one after another. It will - output them separated by spaces to stdout.</para> - - <para>By default, this command will escape the strings passed, - unless <option>--unescape</option> is passed which results in the - inverse operation being applied. If <option>--mangle</option> is given, a - special mode of escaping is applied instead, which assumes the - string is already escaped but will escape everything that - appears obviously non-escaped.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--suffix=</option></term> - - <listitem><para>Appends the specified unit type suffix to the - escaped string. Takes one of the unit types supported by - systemd, such as <literal>.service</literal> or - <literal>.mount</literal>. May not be used in conjunction with - <option>--template=</option>, <option>--unescape</option> or - <option>--mangle</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--template=</option></term> - - <listitem><para>Inserts the escaped strings in a unit name - template. Takes a unit name template such as - <filename>foobar@.service</filename> May not be used in - conjunction with <option>--suffix=</option>, - <option>--unescape</option> or - <option>--mangle</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--path</option></term> - <term><option>-p</option></term> - - <listitem><para>When escaping or unescaping a string, assume - it refers to a file system path. This enables special - processing of the initial <literal>/</literal> of the - path.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--unescape</option></term> - - <listitem><para>Instead of escaping the specified strings, - undo the escaping, reversing the operation. May not be used in - conjunction with <option>--suffix=</option>, - <option>--template=</option> or - <option>--mangle</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--mangle</option></term> - - <listitem><para>Like <option>--escape</option>, but only - escape characters that are obviously not escaped yet, and - possibly automatically append an appropriate unit type suffix - to the string. May not be used in conjunction with - <option>--suffix=</option>, <option>--template=</option> or - <option>--unescape</option>.</para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - - </refsect1> - - <refsect1> - <title>Examples</title> - - <para>Escape a single string:</para> - <programlisting>$ systemd-escape 'Hallöchen, Meister' -Hall\xc3\xb6chen\x2c\x20Meister</programlisting> - - <para>To undo escaping on a single string:</para> - <programlisting>$ systemd-escape -u 'Hall\xc3\xb6chen\x2c\x20Meister' -Hallöchen, Meister</programlisting> - - <para>To generate the mount unit for a path:</para> - <programlisting>$ systemd-escape -p --suffix=mount "/tmp//waldi/foobar/" -tmp-waldi-foobar.mount</programlisting> - - <para>To generate instance names of three strings</para> - <programlisting>$ systemd-escape --template=systemd-nspawn@.service 'My Container 1' 'containerb' 'container/III' -systemd-nspawn@My\x20Container\x201.service systemd-nspawn@containerb.service systemd-nspawn@container-III.service</programlisting> - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-firstboot.xml b/man/systemd-firstboot.xml deleted file mode 100644 index b269e48113..0000000000 --- a/man/systemd-firstboot.xml +++ /dev/null @@ -1,259 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-firstboot" conditional='ENABLE_FIRSTBOOT' - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-firstboot</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-firstboot</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-firstboot</refname> - <refname>systemd-firstboot.service</refname> - <refpurpose>Initialize basic system settings on or before the first boot-up of a system</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-firstboot</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - </cmdsynopsis> - - <para><filename>systemd-firstboot.service</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-firstboot</command> initializes the most - basic system settings interactively on the first boot, or - optionally non-interactively when a system image is created. The - following settings may be set up:</para> - - <itemizedlist> - <listitem><para>The system locale, more specifically the two - locale variables <varname>LANG=</varname> and - <varname>LC_MESSAGES</varname></para></listitem> - - <listitem><para>The system time zone</para></listitem> - - <listitem><para>The system host name</para></listitem> - - <listitem><para>The machine ID of the system</para></listitem> - - <listitem><para>The root user's password</para></listitem> - </itemizedlist> - - <para>Each of the fields may either be queried interactively by - users, set non-interactively on the tool's command line, or be - copied from a host system that is used to set up the system - image.</para> - - <para>If a setting is already initialized, it will not be - overwritten and the user will not be prompted for the - setting.</para> - - <para>Note that this tool operates directly on the file system and - does not involve any running system services, unlike - <citerefentry project='man-pages'><refentrytitle>localectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>timedatectl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - or - <citerefentry><refentrytitle>hostnamectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - This allows <command>systemd-firstboot</command> to operate on - mounted but not booted disk images and in early boot. It is not - recommended to use <command>systemd-firstboot</command> on the - running system while it is up.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--root=<replaceable>root</replaceable></option></term> - <listitem><para>Takes a directory path as an argument. All - paths will be prefixed with the given alternate - <replaceable>root</replaceable> path, including config search - paths. This is useful to operate on a system image mounted to - the specified directory instead of the host system itself. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--locale=<replaceable>LOCALE</replaceable></option></term> - <term><option>--locale-messages=<replaceable>LOCALE</replaceable></option></term> - - <listitem><para>Sets the system locale, more specifically the - <varname>LANG=</varname> and <varname>LC_MESSAGES</varname> - settings. The argument should be a valid locale identifier, - such as <literal>de_DE.UTF-8</literal>. This controls the - <citerefentry project='man-pages'><refentrytitle>locale.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - configuration file.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--timezone=<replaceable>TIMEZONE</replaceable></option></term> - - <listitem><para>Sets the system time zone. The argument should - be a valid time zone identifier, such as - <literal>Europe/Berlin</literal>. This controls the - <citerefentry><refentrytitle>localtime</refentrytitle><manvolnum>5</manvolnum></citerefentry> - symlink.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--hostname=<replaceable>HOSTNAME</replaceable></option></term> - - <listitem><para>Sets the system hostname. The argument should - be a host name, compatible with DNS. This controls the - <citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>5</manvolnum></citerefentry> - configuration file.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--machine-id=<replaceable>ID</replaceable></option></term> - - <listitem><para>Sets the system's machine ID. This controls - the - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry> - file.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--root-password=<replaceable>PASSWORD</replaceable></option></term> - <term><option>--root-password-file=<replaceable>PATH</replaceable></option></term> - - <listitem><para>Sets the password of the system's root user. - This creates a - <citerefentry project='die-net'><refentrytitle>shadow</refentrytitle><manvolnum>5</manvolnum></citerefentry> - file. This setting exists in two forms: - <option>--root-password=</option> accepts the password to set - directly on the command line, and - <option>--root-password-file=</option> reads it from a file. - Note that it is not recommended to specify passwords on the - command line, as other users might be able to see them simply - by invoking - <citerefentry project='die-net'><refentrytitle>ps</refentrytitle><manvolnum>1</manvolnum></citerefentry>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--prompt-locale</option></term> - <term><option>--prompt-timezone</option></term> - <term><option>--prompt-hostname</option></term> - <term><option>--prompt-root-password</option></term> - - <listitem><para>Prompt the user interactively for a specific - basic setting. Note that any explicit configuration settings - specified on the command line take precedence, and the user is - not prompted for it.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--prompt</option></term> - - <listitem><para>Query the user for locale, timezone, hostname - and root password. This is equivalent to specifying - <option>--prompt-locale</option>, - <option>--prompt-timezone</option>, - <option>--prompt-hostname</option>, - <option>--prompt-root-password</option> in combination.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--copy-locale</option></term> - <term><option>--copy-timezone</option></term> - <term><option>--copy-root-password</option></term> - - <listitem><para>Copy a specific basic setting from the host. - This only works in combination with <option>--root=</option> - (see above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--copy</option></term> - - <listitem><para>Copy locale, time zone and root password from - the host. This is equivalent to specifying - <option>--copy-locale</option>, - <option>--copy-timezone</option>, - <option>--copy-root-password</option> in combination.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--setup-machine-id</option></term> - - <listitem><para>Initialize the system's machine ID to a random - ID. This only works in combination with - <option>--root=</option>.</para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>locale.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>localtime</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>shadow</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-machine-id-setup</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>localectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>timedatectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>hostnamectl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-fsck@.service.xml b/man/systemd-fsck@.service.xml deleted file mode 100644 index 933c3247ad..0000000000 --- a/man/systemd-fsck@.service.xml +++ /dev/null @@ -1,139 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-fsck@.service"> - - <refentryinfo> - <title>systemd-fsck@.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-fsck@.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-fsck@.service</refname> - <refname>systemd-fsck-root.service</refname> - <refname>systemd-fsck</refname> - <refpurpose>File system checker logic</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-fsck@.service</filename></para> - <para><filename>systemd-fsck-root.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-fsck</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-fsck@.service</filename> and - <filename>systemd-fsck-root.service</filename> are services - responsible for file system checks. They are instantiated for each - device that is configured for file system checking. - <filename>systemd-fsck-root.service</filename> is responsible for - file system checks on the root file system, but only if the - root filesystem was not checked in the initramfs. - <filename>systemd-fsck@.service</filename> is used for all other - file systems and for the root file system in the initramfs.</para> - - <para>These services are started at boot if - <option>passno</option> in <filename>/etc/fstab</filename> for the - file system is set to a value greater than zero. The file system - check for root is performed before the other file systems. Other - file systems may be checked in parallel, except when they are on - the same rotating disk.</para> - - <para><filename>systemd-fsck</filename> does not know any details - about specific filesystems, and simply executes file system - checkers specific to each filesystem type - (<filename>/sbin/fsck.*</filename>). This helper will decide if - the filesystem should actually be checked based on the time since - last check, number of mounts, unclean unmount, etc.</para> - - <para>If a file system check fails for a service without - <option>nofail</option>, emergency mode is activated, by isolating - to <filename>emergency.target</filename>.</para> - </refsect1> - - <refsect1> - <title>Kernel Command Line</title> - - <para><filename>systemd-fsck</filename> understands one kernel - command line parameter:</para> - - <variablelist class='kernel-commandline-options'> - <varlistentry> - <term><varname>fsck.mode=</varname></term> - - <listitem><para>One of <literal>auto</literal>, - <literal>force</literal>, <literal>skip</literal>. Controls - the mode of operation. The default is <literal>auto</literal>, - and ensures that file system checks are done when the file - system checker deems them necessary. <literal>force</literal> - unconditionally results in full file system checks. - <literal>skip</literal> skips any file system - checks.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>fsck.repair=</varname></term> - - <listitem><para>One of <literal>preen</literal>, - <literal>yes</literal>, <literal>no</literal>. Controls the - mode of operation. The default is <literal> preen</literal>, - and will automatically repair problems that can be safely - fixed. <literal>yes </literal> will answer yes to all - questions by fsck and <literal>no</literal> will answer no to - all questions. </para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>fsck</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-quotacheck.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>fsck.btrfs</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>fsck.cramfs</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>fsck.ext4</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>fsck.fat</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>fsck.hfsplus</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>fsck.minix</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>fsck.ntfs</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>fsck.xfs</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-fstab-generator.xml b/man/systemd-fstab-generator.xml deleted file mode 100644 index a971cb3675..0000000000 --- a/man/systemd-fstab-generator.xml +++ /dev/null @@ -1,183 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-fstab-generator"> - - <refentryinfo> - <title>systemd-fstab-generator</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-fstab-generator</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-fstab-generator</refname> - <refpurpose>Unit generator for /etc/fstab</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/usr/lib/systemd/system-generators/systemd-fstab-generator</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-fstab-generator</filename> is a generator - that translates <filename>/etc/fstab</filename> (see - <citerefentry project='man-pages'><refentrytitle>fstab</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details) into native systemd units early at boot and when - configuration of the system manager is reloaded. This will - instantiate mount and swap units as necessary.</para> - - <para>The <varname>passno</varname> field is treated like a simple - boolean, and the ordering information is discarded. However, if - the root file system is checked, it is checked before all the - other file systems.</para> - - <para>See - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information about special <filename>/etc/fstab</filename> - mount options this generator understands.</para> - - <para><filename>systemd-fstab-generator</filename> implements - <citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>Kernel Command Line</title> - - <para><filename>systemd-fstab-generator</filename> understands the - following kernel command line parameters:</para> - - <variablelist class='kernel-commandline-options'> - - <varlistentry> - <term><varname>fstab=</varname></term> - <term><varname>rd.fstab=</varname></term> - - <listitem><para>Takes a boolean argument. Defaults to - <literal>yes</literal>. If <literal>no</literal>, causes the - generator to ignore any mounts or swaps configured in - <filename>/etc/fstab</filename>. <varname>rd.fstab=</varname> - is honored only by initial RAM disk (initrd) while - <varname>fstab=</varname> is honored by both the main system - and the initrd.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>root=</varname></term> - - <listitem><para>Takes the root filesystem to mount in the - initrd. <varname>root=</varname> is honored by the - initrd.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>rootfstype=</varname></term> - - <listitem><para>Takes the root filesystem type that will be - passed to the mount command. <varname>rootfstype=</varname> is - honored by the initrd.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>rootflags=</varname></term> - - <listitem><para>Takes the root filesystem mount options to - use. <varname>rootflags=</varname> is honored by the - initrd.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>mount.usr=</varname></term> - - <listitem><para>Takes the <filename>/usr</filename> filesystem - to be mounted by the initrd. If - <varname>mount.usrfstype=</varname> or - <varname>mount.usrflags=</varname> is set, then - <varname>mount.usr=</varname> will default to the value set in - <varname>root=</varname>.</para> - - <para>Otherwise, this parameter defaults to the - <filename>/usr</filename> entry found in - <filename>/etc/fstab</filename> on the root filesystem.</para> - - <para><varname>mount.usr=</varname> is honored by the initrd. - </para></listitem> - </varlistentry> - <varlistentry> - <term><varname>mount.usrfstype=</varname></term> - - <listitem><para>Takes the <filename>/usr</filename> filesystem - type that will be passed to the mount command. If - <varname>mount.usr=</varname> or - <varname>mount.usrflags=</varname> is set, then - <varname>mount.usrfstype=</varname> will default to the value - set in <varname>rootfstype=</varname>.</para> - - <para>Otherwise, this value will be read from the - <filename>/usr</filename> entry in - <filename>/etc/fstab</filename> on the root filesystem.</para> - - <para><varname>mount.usrfstype=</varname> is honored by the - initrd.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>mount.usrflags=</varname></term> - - <listitem><para>Takes the <filename>/usr</filename> filesystem - mount options to use. If <varname>mount.usr=</varname> or - <varname>mount.usrfstype=</varname> is set, then - <varname>mount.usrflags=</varname> will default to the value - set in <varname>rootflags=</varname>.</para> - - <para>Otherwise, this value will be read from the - <filename>/usr</filename> entry in - <filename>/etc/fstab</filename> on the root filesystem.</para> - - <para><varname>mount.usrflags=</varname> is honored by the - initrd.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>fstab</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-cryptsetup-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-getty-generator.xml b/man/systemd-getty-generator.xml deleted file mode 100644 index 338925964d..0000000000 --- a/man/systemd-getty-generator.xml +++ /dev/null @@ -1,96 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-getty-generator"> - - <refentryinfo> - <title>systemd-getty-generator</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-getty-generator</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-getty-generator</refname> - <refpurpose>Generator for enabling getty instances on the - console</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/usr/lib/systemd/system-generators/systemd-getty-generator</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-getty-generator</filename> is a generator - that automatically instantiates - <filename>serial-getty@.service</filename> on the kernel console - <filename>/dev/console</filename> if that is not directed to the - virtual console subsystem. It will also instantiate - <filename>serial-getty@.service</filename> instances for - virtualizer consoles, if execution in a virtualized environment is - detected. Finally, it will instantiate - <filename>container-getty@.service</filename> instances for - additional container pseudo TTYs as requested by the container - manager (see <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/ContainerInterface/"><filename>Container - Interface</filename></ulink>). This should ensure that the user is - shown a login prompt at the right place, regardless of which - environment the system is started in. For example, it is - sufficient to redirect the kernel console with a kernel command - line argument such as <varname>console=</varname> to get both - kernel messages and a getty prompt on a serial TTY. See <ulink - url="https://www.kernel.org/doc/Documentation/kernel-parameters.txt"><filename>kernel-parameters.txt</filename></ulink> - for more information on the <varname>console=</varname> kernel - parameter.</para> - - <para><filename>systemd-getty-generator</filename> implements - <citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - - <para>Further information about configuration of gettys you may - find in - <ulink url="http://0pointer.de/blog/projects/serial-console.html">systemd - for Administrators, Part XVI: Gettys on Serial Consoles (and - Elsewhere)</ulink>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>agetty</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-gpt-auto-generator.xml b/man/systemd-gpt-auto-generator.xml deleted file mode 100644 index e890c4dce2..0000000000 --- a/man/systemd-gpt-auto-generator.xml +++ /dev/null @@ -1,186 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2013 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-gpt-auto-generator"> - - <refentryinfo> - <title>systemd-gpt-auto-generator</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-gpt-auto-generator</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-gpt-auto-generator</refname> - <refpurpose>Generator for automatically discovering - and mounting root, <filename>/home</filename> and - <filename>/srv</filename> partitions, as well as - discovering and enabling swap partitions, based on GPT - partition type GUIDs.</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/usr/lib/systemd/system-generators/systemd-gpt-auto-generator</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-gpt-auto-generator</filename> is a unit - generator that automatically discovers root, - <filename>/home</filename>, <filename>/srv</filename> and swap - partitions and creates mount and swap units for them, based on the - partition type GUIDs of GUID partition tables (GPT). It implements - the <ulink - url="http://www.freedesktop.org/wiki/Specifications/DiscoverablePartitionsSpec/">Discoverable - Partitions Specification</ulink>. Note that this generator has no - effect on non-GPT systems, or where the directories under the - mount points are already non-empty. Also, on systems where the - units are explicitly configured (for example, listed in - <citerefentry - project='man-pages'><refentrytitle>fstab</refentrytitle><manvolnum>5</manvolnum></citerefentry>), - the units this generator creates are overridden, but additional - automatic dependencies might be created.</para> - - <para>This generator will only look for root partitions on the - same physical disk the EFI System Partition (ESP) is located on. - It will only look for the other partitions on the same physical - disk the root file system is located on. These partitions will not - be searched on systems where the root file system is distributed - on multiple disks, for example via btrfs RAID.</para> - - <para><filename>systemd-gpt-auto-generator</filename> is useful - for centralizing file system configuration in the partition table - and making manual configuration in <filename>/etc/fstab</filename> - or suchlike unnecessary.</para> - - <para>This generator looks for the partitions based on their - partition type GUID. The following partition type GUIDs are - identified:</para> - - <table> - <title>Partition Type GUIDs</title> - <tgroup cols='3' align='left' colsep='1' rowsep='1'> - <colspec colname="guid" /> - <colspec colname="name" /> - <colspec colname="explanation" /> - <thead> - <row> - <entry>Partition Type GUID</entry> - <entry>Name</entry> - <entry>Explanation</entry> - </row> - </thead> - <tbody> - <row> - <entry>44479540-f297-41b2-9af7-d131d5f0458a</entry> - <entry><filename>Root Partition (x86)</filename></entry> - <entry>On 32-bit x86 systems, the first x86 root partition on the disk the EFI ESP is located on is mounted to the root directory <filename>/</filename>.</entry> - </row> - <row> - <entry>4f68bce3-e8cd-4db1-96e7-fbcaf984b709</entry> - <entry><filename>Root Partition (x86-64)</filename></entry> - <entry>On 64-bit x86 systems, the first x86-64 root partition on the disk the EFI ESP is located on is mounted to the root directory <filename>/</filename>.</entry> - </row> - <row> - <entry>69dad710-2ce4-4e3c-b16c-21a1d49abed3</entry> - <entry><filename>Root Partition (32-bit ARM)</filename></entry> - <entry>On 32-bit ARM systems, the first ARM root partition on the disk the EFI ESP is located on is mounted to the root directory <filename>/</filename>.</entry> - </row> - <row> - <entry>b921b045-1df0-41c3-af44-4c6f280d3fae</entry> - <entry><filename>Root Partition (64-bit ARM)</filename></entry> - <entry>On 64-bit ARM systems, the first ARM root partition on the disk the EFI ESP is located on is mounted to the root directory <filename>/</filename>.</entry> - </row> - <row> - <entry>933ac7e1-2eb4-4f13-b844-0e14e2aef915</entry> - <entry>Home Partition</entry> - <entry>The first home partition on the disk the root partition is located on is mounted to <filename>/home</filename>.</entry> - </row> - <row> - <entry>3b8f8425-20e0-4f3b-907f-1a25a76f98e8</entry> - <entry>Server Data Partition</entry> - <entry>The first server data partition on the disk the root partition is located on is mounted to <filename>/srv</filename>.</entry> - </row> - <row> - <entry>0657fd6d-a4ab-43c4-84e5-0933c84b4f4f</entry> - <entry>Swap</entry> - <entry>All swap partitions located on the disk the root partition is located on are enabled.</entry> - </row> - </tbody> - </tgroup> - </table> - - <para>The <filename>/home</filename> and <filename>/srv</filename> - partitions may be encrypted in LUKS format. In this case, a device - mapper device is set up under the names - <filename>/dev/mapper/home</filename> and - <filename>/dev/mapper/srv</filename>. Note that this might create - conflicts if the same partition is listed in - <filename>/etc/crypttab</filename> with a different device mapper - device name.</para> - - <para>Mount and automount units for the EFI System Partition (ESP), - mounting it to <filename>/boot</filename>, are generated on EFI - systems where the boot loader communicates the used ESP to the operating - system. Since this generator creates an automount unit, the mount will - only be activated on-demand, when accessed. On systems where - <filename>/boot</filename> is an explicitly configured mount - (for example, listed in - <citerefentry project='man-pages'><refentrytitle>fstab</refentrytitle><manvolnum>5</manvolnum></citerefentry>) - or where the <filename>/boot</filename> mount point is non-empty, no - mount units are generated.</para> - - <para>When using this generator in conjunction with btrfs file - systems, make sure to set the correct default subvolumes on them, - using <command>btrfs subvolume set-default</command>.</para> - - <para><filename>systemd-gpt-auto-generator</filename> implements - <citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-cryptsetup@.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>cryptsetup</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>fstab</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>btrfs</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-halt.service.xml b/man/systemd-halt.service.xml deleted file mode 100644 index c94e2a1820..0000000000 --- a/man/systemd-halt.service.xml +++ /dev/null @@ -1,118 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-halt.service"> - - <refentryinfo> - <title>systemd-halt.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-halt.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-halt.service</refname> - <refname>systemd-poweroff.service</refname> - <refname>systemd-reboot.service</refname> - <refname>systemd-kexec.service</refname> - <refname>systemd-shutdown</refname> - <refpurpose>System shutdown logic</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-halt.service</filename></para> - <para><filename>systemd-poweroff.service</filename></para> - <para><filename>systemd-reboot.service</filename></para> - <para><filename>systemd-kexec.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-shutdown</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-halt.service</filename> is a system - service that is pulled in by <filename>halt.target</filename> and - is responsible for the actual system halt. Similarly, - <filename>systemd-poweroff.service</filename> is pulled in by - <filename>poweroff.target</filename>, - <filename>systemd-reboot.service</filename> by - <filename>reboot.target</filename> and - <filename>systemd-kexec.service</filename> by - <filename>kexec.target</filename> to execute the respective - actions.</para> - - <para>When these services are run, they ensure that PID 1 is - replaced by the - <filename>/usr/lib/systemd/systemd-shutdown</filename> tool which - is then responsible for the actual shutdown. Before shutting down, - this binary will try to unmount all remaining file systems, - disable all remaining swap devices, detach all remaining storage - devices and kill all remaining processes.</para> - - <para>It is necessary to have this code in a separate binary - because otherwise rebooting after an upgrade might be broken — the - running PID 1 could still depend on libraries which are not - available any more, thus keeping the file system busy, which then - cannot be re-mounted read-only.</para> - - <para>Immediately before executing the actual system - halt/poweroff/reboot/kexec <filename>systemd-shutdown</filename> - will run all executables in - <filename>/usr/lib/systemd/system-shutdown/</filename> and pass - one arguments to them: either <literal>halt</literal>, - <literal>poweroff</literal>, <literal>reboot</literal> or - <literal>kexec</literal>, depending on the chosen action. All - executables in this directory are executed in parallel, and - execution of the action is not continued before all executables - finished.</para> - - <para>Note that <filename>systemd-halt.service</filename> (and the - related units) should never be executed directly. Instead, trigger - system shutdown with a command such as <literal>systemctl - halt</literal> or suchlike.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>reboot</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-suspend.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-hibernate-resume-generator.xml b/man/systemd-hibernate-resume-generator.xml deleted file mode 100644 index d811b9b551..0000000000 --- a/man/systemd-hibernate-resume-generator.xml +++ /dev/null @@ -1,93 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2014 Ivan Shapovalov - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-hibernate-resume-generator"> - - <refentryinfo> - <title>systemd-hibernate-resume-generator</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Ivan</firstname> - <surname>Shapovalov</surname> - <email>intelfx100@gmail.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-hibernate-resume-generator</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-hibernate-resume-generator</refname> - <refpurpose>Unit generator for resume= kernel parameter</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/usr/lib/systemd/system-generators/systemd-hibernate-resume-generator</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-hibernate-resume-generator</filename> is a - generator that instantiates - <citerefentry><refentrytitle>systemd-hibernate-resume@.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - unit according to the value of <option>resume=</option> parameter - specified on the kernel command line.</para> - </refsect1> - - <refsect1> - <title>Kernel Command Line</title> - - <para><filename>systemd-hibernate-resume-generator</filename> - understands the following kernel command line parameters:</para> - - <variablelist class='kernel-commandline-options'> - - <varlistentry> - <term><varname>resume=</varname></term> - - <listitem><para>Takes a path to the resume device. Both - persistent block device paths like - <filename>/dev/disk/by-foo/bar</filename> and - <citerefentry project='man-pages'><refentrytitle>fstab</refentrytitle><manvolnum>5</manvolnum></citerefentry>-style - specifiers like <literal>FOO=bar</literal> are - supported.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-hibernate-resume@.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>kernel-command-line</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-hibernate-resume@.service.xml b/man/systemd-hibernate-resume@.service.xml deleted file mode 100644 index 7d00827447..0000000000 --- a/man/systemd-hibernate-resume@.service.xml +++ /dev/null @@ -1,81 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2014 Ivan Shapovalov - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-hibernate-resume@.service"> - - <refentryinfo> - <title>systemd-hibernate-resume@.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Ivan</firstname> - <surname>Shapovalov</surname> - <email>intelfx100@gmail.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-hibernate-resume@.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-hibernate-resume@.service</refname> - <refname>systemd-hibernate-resume</refname> - <refpurpose>Resume from hibernation</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-hibernate-resume@.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-hibernate-resume</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-hibernate-resume@.service</filename> - initiates the resume from hibernation. It is instantiated with the - device to resume from as the template argument.</para> - - <para><filename>systemd-hibernate-resume</filename> only supports - the in-kernel hibernation implementation, known as - <ulink url="https://www.kernel.org/doc/Documentation/power/swsusp.txt">swsusp</ulink>. - Internally, it works by writing the major:minor of specified - device node to <filename>/sys/power/resume</filename>.</para> - - <para>Failing to initiate a resume is not an error condition. It - may mean that there was no resume image (e. g. if the system has - been simply powered off and not hibernated). In such case, the - boot is ordinarily continued.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-hibernate-resume-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-hostnamed.service.xml b/man/systemd-hostnamed.service.xml deleted file mode 100644 index 6990d41b02..0000000000 --- a/man/systemd-hostnamed.service.xml +++ /dev/null @@ -1,85 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-hostnamed.service" conditional='ENABLE_HOSTNAMED'> - - <refentryinfo> - <title>systemd-hostnamed.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-hostnamed.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-hostnamed.service</refname> - <refname>systemd-hostnamed</refname> - <refpurpose>Host name bus mechanism</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-hostnamed.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-hostnamed</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-hostnamed</filename> is a system service - that may be used as a mechanism to change the system's hostname. - <filename>systemd-hostnamed</filename> is automatically activated - on request and terminates itself when it is unused.</para> - - <para>The tool - <citerefentry><refentrytitle>hostnamectl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - is a command line client to this service.</para> - - <para>See the <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/hostnamed"> - developer documentation</ulink> for information about the APIs - <filename>systemd-hostnamed</filename> provides.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>hostname</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machine-info</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>hostnamectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sethostname</refentrytitle><manvolnum>2</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-hwdb.xml b/man/systemd-hwdb.xml deleted file mode 100644 index 2b363c77f2..0000000000 --- a/man/systemd-hwdb.xml +++ /dev/null @@ -1,93 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<refentry id="systemd-hwdb" conditional="ENABLE_HWDB"> - <refentryinfo> - <title>systemd-hwdb</title> - <productname>systemd</productname> - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Kay</firstname> - <surname>Sievers</surname> - <email>kay@vrfy.org</email> - </author> - <author> - <contrib>Developer</contrib> - <firstname>Tom</firstname> - <surname>Gundersen</surname> - <email>teg@jklm.no</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-hwdb</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-hwdb</refname><refpurpose>hardware database management tool</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-hwdb <optional>options</optional> update</command> - </cmdsynopsis> - <cmdsynopsis> - <command>systemd-hwdb <optional>options</optional> query <replaceable>modalias</replaceable></command> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1><title>Description</title> - <para><command>systemd-hwdb</command> expects a command and command - specific arguments. It manages the binary hardware database.</para> - </refsect1> - - <refsect1><title>Options</title> - <variablelist> - <varlistentry> - <term><option>-h</option></term> - <term><option>--help</option></term> - <listitem> - <para>Print help text.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>--usr</option></term> - <listitem> - <para>Generate in /usr/lib/udev instead of /etc/udev.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-r</option></term> - <term><option>--root=<replaceable>PATH</replaceable></option></term> - <listitem> - <para>Alternate root path in the filesystem.</para> - </listitem> - </varlistentry> - </variablelist> - - <refsect2><title>systemd-hwdb - <arg choice="opt"><replaceable>options</replaceable></arg> - update</title> - <para>Update the binary database.</para> - </refsect2> - - <refsect2><title>systemd-hwdb - <arg choice="opt"><replaceable>options</replaceable></arg> - query - <arg><replaceable>MODALIAS</replaceable></arg> - </title> - <para>Query database and print result.</para> - </refsect2> - </refsect1> - - <refsect1> - <title>See Also</title> - <para><citerefentry> - <refentrytitle>hwdb</refentrytitle><manvolnum>7</manvolnum> - </citerefentry></para> - </refsect1> -</refentry> diff --git a/man/systemd-importd.service.xml b/man/systemd-importd.service.xml deleted file mode 100644 index 8fdced475c..0000000000 --- a/man/systemd-importd.service.xml +++ /dev/null @@ -1,82 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2016 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-importd.service" conditional='ENABLE_IMPORTD'> - - <refentryinfo> - <title>systemd-importd.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-importd.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-importd.service</refname> - <refname>systemd-importd</refname> - <refpurpose>VM and container image import and export service</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-importd.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-importd</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-importd</command> is a system service that allows importing, exporting and downloading of - system images suitable for running as VM or containers. It is a companion service for - <citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, and provides the implementation for - <citerefentry><refentrytitle>machinectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s - <command>pull-raw</command>, <command>pull-tar</command>, <command>import-raw</command>, - <command>import-tar</command>, <command>export-raw</command>, and <command>export-tar</command> commands.</para> - - <para>See the - <ulink url="http://www.freedesktop.org/wiki/Software/systemd/importd"> - importd D-Bus API Documentation</ulink> for information about the - APIs <filename>systemd-importd</filename> provides.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machinectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-machined.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-inhibit.xml b/man/systemd-inhibit.xml deleted file mode 100644 index 9d85908f97..0000000000 --- a/man/systemd-inhibit.xml +++ /dev/null @@ -1,177 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-inhibit" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-inhibit</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-inhibit</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-inhibit</refname> - <refpurpose>Execute a program with an inhibition lock taken</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-inhibit <arg choice="opt" rep="repeat">OPTIONS</arg> <arg>COMMAND</arg> <arg choice="opt" rep="repeat">ARGUMENTS</arg></command> - </cmdsynopsis> - <cmdsynopsis> - <command>systemd-inhibit <arg choice="opt" rep="repeat">OPTIONS</arg> --list</command> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-inhibit</command> may be used to execute a - program with a shutdown, sleep or idle inhibitor lock taken. The - lock will be acquired before the specified command line is - executed and released afterwards.</para> - - <para>Inhibitor locks may be used to block or delay system sleep - and shutdown requests from the user, as well as automatic idle - handling of the OS. This is useful to avoid system suspends while - an optical disc is being recorded, or similar operations that - should not be interrupted.</para> - - <para>For more information see the <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/inhibit">Inhibitor - Lock Developer Documentation</ulink>.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--what=</option></term> - - <listitem><para>Takes a colon-separated list of one or more - operations to inhibit: - <literal>shutdown</literal>, - <literal>sleep</literal>, - <literal>idle</literal>, - <literal>handle-power-key</literal>, - <literal>handle-suspend-key</literal>, - <literal>handle-hibernate-key</literal>, - <literal>handle-lid-switch</literal>, - for inhibiting reboot/power-off/halt/kexec, - suspending/hibernating, the automatic idle detection, or the - low-level handling of the power/sleep key and the lid switch, - respectively. If omitted, defaults to - <literal>idle:sleep:shutdown</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--who=</option></term> - - <listitem><para>Takes a short, human-readable descriptive - string for the program taking the lock. If not passed, - defaults to the command line string.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--why=</option></term> - - <listitem><para>Takes a short, human-readable descriptive - string for the reason for taking the lock. Defaults to - "Unknown reason".</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--mode=</option></term> - - <listitem><para>Takes either <literal>block</literal> or - <literal>delay</literal> and describes how the lock is - applied. If <literal>block</literal> is used (the default), - the lock prohibits any of the requested operations without - time limit, and only privileged users may override it. If - <literal>delay</literal> is used, the lock can only delay the - requested operations for a limited time. If the time elapses, - the lock is ignored and the operation executed. The time limit - may be specified in - <citerefentry><refentrytitle>logind.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - Note that <literal>delay</literal> is only available for - <literal>sleep</literal> and - <literal>shutdown</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--list</option></term> - - <listitem><para>Lists all active inhibition locks instead of - acquiring one.</para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>Returns the exit status of the executed program.</para> - </refsect1> - - <refsect1> - <title>Example</title> - - <programlisting># systemd-inhibit wodim foobar.iso</programlisting> - - <para>This burns the ISO image - <filename>foobar.iso</filename> on a CD using - <citerefentry project='man-pages'><refentrytitle>wodim</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - and inhibits system sleeping, shutdown and idle while - doing so.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>logind.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-initctl.service.xml b/man/systemd-initctl.service.xml deleted file mode 100644 index 5c7f9a4a16..0000000000 --- a/man/systemd-initctl.service.xml +++ /dev/null @@ -1,76 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-initctl.service"> - - <refentryinfo> - <title>systemd-initctl.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-initctl.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-initctl.service</refname> - <refname>systemd-initctl.socket</refname> - <refname>systemd-initctl</refname> - <refpurpose>/dev/initctl compatibility</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-initctl.service</filename></para> - <para><filename>systemd-initctl.socket</filename></para> - <para><filename>/usr/lib/systemd/systemd-initctl</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-initctl</filename> is a system service - that implements compatibility with the - <filename>/dev/initctl</filename> FIFO file system object, as - implemented by the SysV init system. - <filename>systemd-initctl</filename> is automatically activated on - request and terminates itself when it is unused.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-journal-gatewayd.service.xml b/man/systemd-journal-gatewayd.service.xml deleted file mode 100644 index 9ed85c3950..0000000000 --- a/man/systemd-journal-gatewayd.service.xml +++ /dev/null @@ -1,302 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-journal-gatewayd.service" conditional='HAVE_MICROHTTPD' - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-journal-gatewayd.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-journal-gatewayd.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-journal-gatewayd.service</refname> - <refname>systemd-journal-gatewayd.socket</refname> - <refname>systemd-journal-gatewayd</refname> - <refpurpose>HTTP server for journal events</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-journal-gatewayd.service</filename></para> - <para><filename>systemd-journal-gatewayd.socket</filename></para> - <cmdsynopsis> - <command>/usr/lib/systemd/systemd-journal-gatewayd</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-journal-gatewayd</command> serves journal - events over the network. Clients must connect using - HTTP. The server listens on port 19531 by default. - If <option>--cert=</option> is specified, the server expects - HTTPS connections.</para> - - <para>The program is started by - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - and expects to receive a single socket. Use - <command>systemctl start systemd-journal-gatewayd.socket</command> to start - the service, and <command>systemctl enable systemd-journal-gatewayd.socket</command> - to have it started on boot.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--cert=</option></term> - - <listitem><para>Specify the path to a file containing a server - certificate in PEM format. This option switches - <command>systemd-journal-gatewayd</command> into HTTPS mode - and must be used together with - <option>--key=</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--key=</option></term> - - <listitem><para>Specify the path to a file containing a server - key in PEM format corresponding to the certificate specified - with <option>--cert=</option>.</para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - </refsect1> - - <refsect1> - <title>Supported URLs</title> - - <para>The following URLs are recognized:</para> - - <variablelist> - <varlistentry> - <term><uri>/browse</uri></term> - - <listitem><para>Interactive browsing.</para></listitem> - </varlistentry> - - <varlistentry> - <term><uri>/entries[?option1&option2=value...]</uri></term> - - <listitem><para>Retrieval of events in various formats.</para> - - <para>The <option>Accept:</option> part of the HTTP header - determines the format. Supported values are described below. - </para> - - <para>The <option>Range:</option> part of the HTTP header - determines the range of events returned. Supported values are - described below. - </para> - - <para>GET parameters can be used to modify what events are - returned. Supported parameters are described below.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><uri>/machine</uri></term> - - <listitem><para>Return a JSON structure describing the machine.</para> - - <para>Example: - <programlisting>{ "machine_id" : "8cf7ed9d451ea194b77a9f118f3dc446", - "boot_id" : "3d3c9efaf556496a9b04259ee35df7f7", - "hostname" : "fedora", - "os_pretty_name" : "Fedora 19 (Rawhide)", - "virtualization" : "kvm", - ...}</programlisting> - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><uri>/fields/<replaceable>FIELD_NAME</replaceable></uri></term> - - <listitem><para>Return a list of values of this field present in the logs.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Accept header</title> - - <para> - <option>Accept: <replaceable>format</replaceable></option> - </para> - - <para>Recognized formats:</para> - - <variablelist> - <varlistentry> - <term><constant>text/plain</constant></term> - - <listitem><para>The default. Plaintext syslog-like output, - one line per journal entry - (like <command>journalctl --output short</command>).</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><constant>application/json</constant></term> - - <listitem><para>Entries are formatted as JSON data structures, - one per line - (like <command>journalctl --output json</command>). - See <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/json">Journal - JSON Format</ulink> for more information.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><constant>text/event-stream</constant></term> - - <listitem><para>Entries are formatted as JSON data structures, - wrapped in a format suitable for <ulink - url="https://developer.mozilla.org/en-US/docs/Server-sent_events/Using_server-sent_events"> - Server-Sent Events</ulink> - (like <command>journalctl --output json-sse</command>). - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><constant>application/vnd.fdo.journal</constant></term> - - <listitem><para>Entries are serialized into a binary (but - mostly text-based) stream suitable for backups and network - transfer - (like <command>journalctl --output export</command>). - See <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/export">Journal - Export Format</ulink> for more information.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Range header</title> - - <para> - <option>Range: entries=<replaceable>cursor</replaceable>[[:<replaceable>num_skip</replaceable>]:<replaceable>num_entries</replaceable>]</option> - </para> - - <para>where - <option>cursor</option> is a cursor string, - <option>num_skip</option> is an integer, - <option>num_entries</option> is an unsigned integer. - </para> - - <para>Range defaults to all available events.</para> - </refsect1> - - <refsect1> - <title>URL GET parameters</title> - - <para>Following parameters can be used as part of the URL:</para> - - <variablelist> - <varlistentry> - <term><uri>follow</uri></term> - - <listitem><para>wait for new events - (like <command>journalctl --follow</command>, except that - the number of events returned is not limited).</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><uri>discrete</uri></term> - - <listitem><para>Test that the specified cursor refers to an - entry in the journal. Returns just this entry.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><uri>boot</uri></term> - - <listitem><para>Limit events to the current boot of the system - (like <command>journalctl --this-boot</command>).</para></listitem> - </varlistentry> - - <varlistentry> - <term><uri><replaceable>KEY</replaceable>=<replaceable>match</replaceable></uri></term> - - <listitem><para>Match journal fields. See - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Examples</title> - <para>Retrieve events from this boot from local journal - in <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/export">Journal - Export Format</ulink>: - <programlisting>curl --silent -H'Accept: application/vnd.fdo.journal' \ - 'http://localhost:19531/entries?boot'</programlisting> - </para> - - <para>Listen for core dumps: - <programlisting>curl 'http://localhost:19531/entries?follow&MESSAGE_ID=fc2e22bc6ee647b6b90729ab34a250b1'</programlisting></para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-journal-remote.xml b/man/systemd-journal-remote.xml deleted file mode 100644 index 3899f175d4..0000000000 --- a/man/systemd-journal-remote.xml +++ /dev/null @@ -1,325 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-journal-remote" conditional='HAVE_MICROHTTPD' - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-journal-remote</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-journal-remote</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-journal-remote</refname> - <refpurpose>Receive journal messages over the network</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-journal-remote</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="opt" rep="norepeat">-o/--output=<replaceable>DIR</replaceable>|<replaceable>FILE</replaceable></arg> - <arg choice="opt" rep="repeat">SOURCES</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para> - <filename>systemd-journal-remote</filename> is a command to - receive serialized journal events and store them to the journal. - Input streams are in the - <ulink url="http://www.freedesktop.org/wiki/Software/systemd/export"> - Journal Export Format - </ulink>, - i.e. like the output from - <command>journalctl --output=export</command>. For transport over - the network, this serialized stream is usually carried over an - HTTPS connection. - </para> - </refsect1> - - <refsect1> - <title>Sources</title> - - <para> - Sources can be either "active" - (<command>systemd-journal-remote</command> requests and pulls - the data), or "passive" - (<command>systemd-journal-remote</command> waits for a - connection and then receives events pushed by the other side). - </para> - - <para> - <command>systemd-journal-remote</command> can read more than one - event stream at a time. They will be interleaved in the output - file. In case of "active" connections, each "source" is one - stream, and in case of "passive" connections, each connection can - result in a separate stream. Sockets can be configured in - "accept" mode (i.e. only one connection), or "listen" mode (i.e. - multiple connections, each resulting in a stream). - </para> - - <para> - When there are no more connections, and no more can be created - (there are no listening sockets), then - <command>systemd-journal-remote</command> will exit. - </para> - - <para>Active sources can be specified in the following - ways:</para> - - <variablelist> - <varlistentry> - <listitem><para>When <option>-</option> is given as a - positional argument, events will be read from standard input. - Other positional arguments will be treated as filenames - to open and read from.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--url=<replaceable>ADDRESS</replaceable></option></term> - - <listitem><para>With the - <option>--url=<replaceable>ADDRESS</replaceable></option> option, - events will be retrieved using HTTP from - <replaceable>ADDRESS</replaceable>. This URL should refer to the - root of a remote - <citerefentry><refentrytitle>systemd-journal-gatewayd</refentrytitle><manvolnum>8</manvolnum></citerefentry> - instance (e.g. <ulink>http://some.host:19531/</ulink> or - <ulink>https://some.host:19531/</ulink>).</para></listitem> - </varlistentry> - </variablelist> - - <para>Passive sources can be specified in the following - ways:</para> - - <variablelist> - <varlistentry> - <term><option>--listen-raw=<replaceable>ADDRESS</replaceable></option></term> - - <listitem><para><replaceable>ADDRESS</replaceable> must be an - address suitable for <option>ListenStream=</option> (cf. - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>). - <command>systemd-journal-remote</command> will listen on this - socket for connections. Each connection is expected to be a - stream of journal events.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--listen-http=<replaceable>ADDRESS</replaceable></option></term> - <term><option>--listen-https=<replaceable>ADDRESS</replaceable></option></term> - - <listitem><para><replaceable>ADDRESS</replaceable> must be - either a negative integer, in which case it will be - interpreted as the (negated) file descriptor number, or an - address suitable for <option>ListenStream=</option> (c.f. - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>). - In the first case, matching file descriptor must be inherited - through - <varname>$LISTEN_FDS</varname>/<varname>$LISTEN_PID</varname>. - In the second case, an HTTP or HTTPS server will be spawned on - this port, respectively for <option>--listen-http</option> and - <option>--listen-https</option>. Currently, only POST requests - to <filename>/upload</filename> with <literal>Content-Type: - application/vnd.fdo.journal</literal> are supported.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>$LISTEN_FDS</varname></term> - - <listitem><para><command>systemd-journal-remote</command> - supports the - <varname>$LISTEN_FDS</varname>/<varname>$LISTEN_PID</varname> - protocol. Open sockets inherited through socket activation - behave like those opened with <option>--listen-raw=</option> - described above, unless they are specified as an argument in - <option>--listen-http=-<replaceable>n</replaceable></option> - or - <option>--listen-https=-<replaceable>n</replaceable></option> - above. In the latter case, an HTTP or HTTPS server will be - spawned using this descriptor and connections must be made - over the HTTP protocol.</para> - </listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>Sinks</title> - - <para>The location of the output journal can be specified - with <option>-o</option> or <option>--output=</option>. For "active" - sources, this option is required. - </para> - - <variablelist> - <varlistentry> - <term><option>--output=<replaceable>FILE</replaceable></option></term> - - <listitem><para>Will write to this journal file. The filename - must end with <filename>.journal</filename>. The file will be - created if it does not exist. If necessary (journal file full, - or corrupted), the file will be renamed following normal - journald rules and a new journal file will be created in its - stead.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--output=<replaceable>DIR</replaceable></option></term> - - <listitem><para>Will create journal files underneath directory - <replaceable>DIR</replaceable>. The directory must exist. If - necessary (journal files over size, or corrupted), journal - files will be rotated following normal journald rules. Names - of files underneath <replaceable>DIR</replaceable> will be - generated using the rules described below.</para></listitem> - </varlistentry> - </variablelist> - - <para>If <option>--output=</option> is not used, the output - directory <filename>/var/log/journal/remote/</filename> will be - used. In case the output file is not specified, journal files - will be created underneath the selected directory. Files will be - called - <filename>remote-<replaceable>hostname</replaceable>.journal</filename>, - where the <replaceable>hostname</replaceable> part is the - escaped hostname of the source endpoint of the connection, or the - numerical address if the hostname cannot be determined.</para> - - <para>In case of "active" sources, the output file name must - always be given explicitly.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--split-mode</option></term> - - <listitem><para>One of <constant>none</constant> or - <constant>host</constant>. For the first, only one output - journal file is used. For the latter, a separate output file - is used, based on the hostname of the other endpoint of a - connection.</para> - - <para>In case of "active" sources, the output file name must - always be given explicitly and only <constant>none</constant> - is allowed.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--compress</option></term> - <term><option>--no-compress</option></term> - - <listitem><para>Compress or not, respectively, the data in the - journal using XZ.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--seal</option></term> - <term><option>--no-seal</option></term> - - <listitem><para>Periodically sign or not, respectively, the - data in the journal using Forward Secure Sealing. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--getter=<replaceable>PROG --option1 --option2</replaceable></option></term> - - <listitem><para>Program to invoke to retrieve data. The journal - event stream must be generated on standard output.</para> - - <para>Examples:</para> - - <programlisting>--getter='curl "-HAccept: application/vnd.fdo.journal" https://some.host:19531/'</programlisting> - - <programlisting>--getter='wget --header="Accept: application/vnd.fdo.journal" -O- https://some.host:19531/'</programlisting> - </listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - </refsect1> - - <refsect1> - <title>Examples</title> - <para>Copy local journal events to a different journal directory: - <programlisting> -journalctl -o export | systemd-journal-remote -o /tmp/dir - - </programlisting> - </para> - - <para>Retrieve all available events from a remote - <citerefentry><refentrytitle>systemd-journal-gatewayd</refentrytitle><manvolnum>8</manvolnum></citerefentry> - instance and store them in - <filename>/var/log/journal/remote/remote-some.host.journal</filename>: - <programlisting> -systemd-journal-remote --url http://some.host:19531/ - </programlisting> - </para> - - <para>Retrieve current boot events and wait for new events from a remote - <citerefentry><refentrytitle>systemd-journal-gatewayd</refentrytitle><manvolnum>8</manvolnum></citerefentry> - instance, and store them in - <filename>/var/log/journal/remote/remote-some.host.journal</filename>: - <programlisting> -systemd-journal-remote --url http://some.host:19531/entries?boot&follow - </programlisting> - </para> -</refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd-journal-upload</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-journal-gatewayd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - <citerefentry><refentrytitle>journal-remote.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> -</refentry> diff --git a/man/systemd-journal-upload.xml b/man/systemd-journal-upload.xml deleted file mode 100644 index f9723dea89..0000000000 --- a/man/systemd-journal-upload.xml +++ /dev/null @@ -1,263 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-journal-upload" conditional='HAVE_MICROHTTPD' - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-journal-upload</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-journal-upload</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-journal-upload</refname> - <refpurpose>Send journal messages over the network</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-journal-upload</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="opt" rep="norepeat">-u/--url=<replaceable>URL</replaceable></arg> - <arg choice="opt" rep="repeat">SOURCES</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para> - <command>systemd-journal-upload</command> will upload journal - entries to the URL specified with <option>--url</option>. Unless - limited by one of the options specified below, all journal - entries accessible to the user the program is running as will be - uploaded, and then the program will wait and send new entries - as they become available. - </para> - </refsect1> - - <refsect1> - <title>Options</title> - - <variablelist> - <varlistentry> - <term><option>-u</option></term> - <term><option>--url=<optional>https://</optional><replaceable>URL</replaceable></option></term> - <term><option>--url=<optional>http://</optional><replaceable>URL</replaceable></option></term> - - <listitem><para>Upload to the specified - address. <replaceable>URL</replaceable> may specify either - just the hostname or both the protocol and - hostname. <constant>https</constant> is the default. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--system</option></term> - <term><option>--user</option></term> - - <listitem><para>Limit uploaded entries to entries from system - services and the kernel, or to entries from services of - current user. This has the same meaning as - <option>--system</option> and <option>--user</option> options - for - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. If - neither is specified, all accessible entries are uploaded. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-m</option></term> - <term><option>--merge</option></term> - - <listitem><para>Upload entries interleaved from all available - journals, including other machines. This has the same meaning - as <option>--merge</option> option for - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-D</option></term> - <term><option>--directory=<replaceable>DIR</replaceable></option></term> - - <listitem><para>Takes a directory path as argument. Upload - entries from the specified journal directory - <replaceable>DIR</replaceable> instead of the default runtime - and system journal paths. This has the same meaning as - <option>--directory</option> option for - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--file=<replaceable>GLOB</replaceable></option></term> - - <listitem><para>Takes a file glob as an argument. Upload - entries from the specified journal files matching - <replaceable>GLOB</replaceable> instead of the default runtime - and system journal paths. May be specified multiple times, in - which case files will be suitably interleaved. This has the same meaning as - <option>--file</option> option for - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--cursor=</option></term> - - <listitem><para>Upload entries from the location in the - journal specified by the passed cursor. This has the same - meaning as <option>--cursor</option> option for - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--after-cursor=</option></term> - - <listitem><para>Upload entries from the location in the - journal <emphasis>after</emphasis> the location specified by - the this cursor. This has the same meaning as - <option>--after-cursor</option> option for - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - - - <varlistentry> - <term><option>--save-state</option><optional>=<replaceable>PATH</replaceable></optional></term> - - <listitem><para>Upload entries from the location in the - journal <emphasis>after</emphasis> the location specified by - the cursor saved in file at <replaceable>PATH</replaceable> - (<filename>/var/lib/systemd/journal-upload/state</filename> by default). - After an entry is successfully uploaded, update this file - with the cursor of that entry. - </para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned; otherwise, a non-zero - failure code is returned.</para> - </refsect1> - - <refsect1> - <title>Examples</title> - <example> - <title>Setting up certificates for authentication</title> - - <para>Certificates signed by a trusted authority are used to - verify that the server to which messages are uploaded is - legitimate, and vice versa, that the client is trusted.</para> - - <para>A suitable set of certificates can be generated with - <command>openssl</command>:</para> - - <programlisting>openssl req -newkey rsa:2048 -days 3650 -x509 -nodes \ - -out ca.pem -keyout ca.key -subj '/CN=Certificate authority/' - -cat >ca.conf <<EOF -[ ca ] -default_ca = this - -[ this ] -new_certs_dir = . -certificate = ca.pem -database = ./index -private_key = ca.key -serial = ./serial -default_days = 3650 -default_md = default -policy = policy_anything - -[ policy_anything ] -countryName = optional -stateOrProvinceName = optional -localityName = optional -organizationName = optional -organizationalUnitName = optional -commonName = supplied -emailAddress = optional -EOF - -touch index -echo 0001 >serial - -SERVER=server -CLIENT=client - -openssl req -newkey rsa:1024 -nodes -out $SERVER.csr -keyout $SERVER.key -subj "/CN=$SERVER/" -openssl ca -batch -config ca.conf -notext -in $SERVER.csr -out $SERVER.pem - -openssl req -newkey rsa:1024 -nodes -out $CLIENT.csr -keyout $CLIENT.key -subj "/CN=$CLIENT/" -openssl ca -batch -config ca.conf -notext -in $CLIENT.csr -out $CLIENT.pem -</programlisting> - - <para>Generated files <filename>ca.pem</filename>, - <filename>server.pem</filename>, and - <filename>server.key</filename> should be installed on server, - and <filename>ca.pem</filename>, - <filename>client.pem</filename>, and - <filename>client.key</filename> on the client. The location of - those files can be specified using - <varname>TrustedCertificateFile=</varname>, - <varname>ServerCertificateFile=</varname>, - <varname>ServerKeyFile=</varname>, in - <filename>/etc/systemd/journal-remote.conf</filename> and - <filename>/etc/systemd/journal-upload.conf</filename>, - respectively. The default locations can be queried by using - <command>systemd-journal-remote --help</command> and - <command>systemd-journal-upload --help</command>.</para> - </example> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd-journal-remote</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-journald.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-journal-gatewayd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> -</refentry> diff --git a/man/systemd-journald.service.xml b/man/systemd-journald.service.xml deleted file mode 100644 index 2810638bc2..0000000000 --- a/man/systemd-journald.service.xml +++ /dev/null @@ -1,276 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-journald.service"> - - <refentryinfo> - <title>systemd-journald.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-journald.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-journald.service</refname> - <refname>systemd-journald.socket</refname> - <refname>systemd-journald-dev-log.socket</refname> - <refname>systemd-journald-audit.socket</refname> - <refname>systemd-journald</refname> - <refpurpose>Journal service</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-journald.service</filename></para> - <para><filename>systemd-journald.socket</filename></para> - <para><filename>systemd-journald-dev-log.socket</filename></para> - <para><filename>systemd-journald-audit.socket</filename></para> - <para><filename>/usr/lib/systemd/systemd-journald</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-journald</filename> is a system service - that collects and stores logging data. It creates and maintains - structured, indexed journals based on logging information that is - received from a variety of sources:</para> - - <itemizedlist> - <listitem><para>Kernel log messages, via kmsg</para></listitem> - - <listitem><para>Simple system log messages, via the libc - <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call</para></listitem> - - <listitem><para>Structured system log messages via the native - Journal API, see - <citerefentry><refentrytitle>sd_journal_print</refentrytitle><manvolnum>4</manvolnum></citerefentry></para></listitem> - - <listitem><para>Standard output and standard error of system - services</para></listitem> - - <listitem><para>Audit records, via the audit - subsystem</para></listitem> - </itemizedlist> - - <para>The daemon will implicitly collect numerous metadata fields - for each log messages in a secure and unfakeable way. See - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for more information about the collected metadata. - </para> - - <para>Log data collected by the journal is primarily text-based - but can also include binary data where necessary. All objects - stored in the journal can be up to 2^64-1 bytes in size.</para> - - <para>By default, the journal stores log data in - <filename>/run/log/journal/</filename>. Since - <filename>/run/</filename> is volatile, log data is lost at - reboot. To make the data persistent, it is sufficient to create - <filename>/var/log/journal/</filename> where - <filename>systemd-journald</filename> will then store the - data:</para> - - <programlisting>mkdir -p /var/log/journal -systemd-tmpfiles --create --prefix /var/log/journal</programlisting> - - <para>See - <citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for information about the configuration of this service.</para> - </refsect1> - - <refsect1> - <title>Signals</title> - - <variablelist> - <varlistentry> - <term>SIGUSR1</term> - - <listitem><para>Request that journal data from - <filename>/run/</filename> is flushed to - <filename>/var/</filename> in order to make it persistent (if - this is enabled). This must be used after - <filename>/var/</filename> is mounted, as otherwise log data - from <filename>/run</filename> is never flushed to - <filename>/var</filename> regardless of the configuration. The - <command>journalctl --flush</command> command uses this signal - to request flushing of the journal files, and then waits for - the operation to complete. See - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term>SIGUSR2</term> - - <listitem><para>Request immediate rotation of the journal - files. The <command>journalctl --rotate</command> command uses - this signal to request journal file - rotation.</para></listitem> - </varlistentry> - - <varlistentry> - <term>SIGRTMIN+1</term> - - <listitem><para>Request that all unwritten log data is written - to disk. The <command>journalctl --sync</command> command uses - this signal to trigger journal synchronization, and then waits - for the operation to complete.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Kernel Command Line</title> - - <para>A few configuration parameters from - <filename>journald.conf</filename> may be overridden on the kernel - command line:</para> - - <variablelist class='kernel-commandline-options'> - <varlistentry> - <term><varname>systemd.journald.forward_to_syslog=</varname></term> - <term><varname>systemd.journald.forward_to_kmsg=</varname></term> - <term><varname>systemd.journald.forward_to_console=</varname></term> - <term><varname>systemd.journald.forward_to_wall=</varname></term> - - <listitem><para>Enables/disables forwarding of collected log - messages to syslog, the kernel log buffer, the system console - or wall. - </para> - - <para>See - <citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for information about these settings.</para> - </listitem> - - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Access Control</title> - - <para>Journal files are, by default, owned and readable by the - <literal>systemd-journal</literal> system group but are not - writable. Adding a user to this group thus enables her/him to read - the journal files.</para> - - <para>By default, each logged in user will get her/his own set of - journal files in <filename>/var/log/journal/</filename>. These - files will not be owned by the user, however, in order to avoid - that the user can write to them directly. Instead, file system - ACLs are used to ensure the user gets read access only.</para> - - <para>Additional users and groups may be granted access to journal - files via file system access control lists (ACL). Distributions - and administrators may choose to grant read access to all members - of the <literal>wheel</literal> and <literal>adm</literal> system - groups with a command such as the following:</para> - - <programlisting># setfacl -Rnm g:wheel:rx,d:g:wheel:rx,g:adm:rx,d:g:adm:rx /var/log/journal/</programlisting> - - <para>Note that this command will update the ACLs both for - existing journal files and for future journal files created in the - <filename>/var/log/journal/</filename> directory.</para> - </refsect1> - - <refsect1> - <title>Files</title> - - <variablelist> - <varlistentry> - <term><filename>/etc/systemd/journald.conf</filename></term> - - <listitem><para>Configure - <command>systemd-journald</command> - behavior. See - <citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/run/log/journal/<replaceable>machine-id</replaceable>/*.journal</filename></term> - <term><filename>/run/log/journal/<replaceable>machine-id</replaceable>/*.journal~</filename></term> - <term><filename>/var/log/journal/<replaceable>machine-id</replaceable>/*.journal</filename></term> - <term><filename>/var/log/journal/<replaceable>machine-id</replaceable>/*.journal~</filename></term> - - <listitem><para><command>systemd-journald</command> writes - entries to files in - <filename>/run/log/journal/<replaceable>machine-id</replaceable>/</filename> - or - <filename>/var/log/journal/<replaceable>machine-id</replaceable>/</filename> - with the <literal>.journal</literal> suffix. If the daemon is - stopped uncleanly, or if the files are found to be corrupted, - they are renamed using the <literal>.journal~</literal> - suffix, and <command>systemd-journald</command> starts writing - to a new file. <filename>/run</filename> is used when - <filename>/var/log/journal</filename> is not available, or - when <option>Storage=volatile</option> is set in the - <citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - configuration file.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/dev/kmsg</filename></term> - <term><filename>/dev/log</filename></term> - <term><filename>/run/systemd/journal/dev-log</filename></term> - <term><filename>/run/systemd/journal/socket</filename></term> - <term><filename>/run/systemd/journal/stdout</filename></term> - - <listitem><para>Sockets and other paths that - <command>systemd-journald</command> will listen on that are - visible in the file system. In addition to these, journald can - listen for audit events using netlink.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.journal-fields</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-coredump</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>setfacl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_journal_print</refentrytitle><manvolnum>4</manvolnum></citerefentry>, - <command>pydoc systemd.journal</command> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-localed.service.xml b/man/systemd-localed.service.xml deleted file mode 100644 index 06aa78c0e4..0000000000 --- a/man/systemd-localed.service.xml +++ /dev/null @@ -1,87 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-localed.service" conditional='ENABLE_LOCALED'> - - <refentryinfo> - <title>systemd-localed.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-localed.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-localed.service</refname> - <refname>systemd-localed</refname> - <refpurpose>Locale bus mechanism</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-localed.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-localed</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-localed</filename> is a system service - that may be used as mechanism to change the system locale - settings, as well as the console key mapping and default X11 key - mapping. <filename>systemd-localed</filename> is automatically - activated on request and terminates itself when it is - unused.</para> - - <para>The tool - <citerefentry project='man-pages'><refentrytitle>localectl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - is a command line client to this service.</para> - - <para>See the <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/localed"> - developer documentation</ulink> for information about the APIs - <filename>systemd-localed</filename> provides.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>locale.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>vconsole.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>localectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='mankier'><refentrytitle>loadkeys</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-logind.service.xml b/man/systemd-logind.service.xml deleted file mode 100644 index 5733e42cd1..0000000000 --- a/man/systemd-logind.service.xml +++ /dev/null @@ -1,121 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-logind.service" conditional='ENABLE_LOGIND'> - - <refentryinfo> - <title>systemd-logind.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-logind.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-logind.service</refname> - <refname>systemd-logind</refname> - <refpurpose>Login manager</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-logind.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-logind</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-logind</command> is a system service that - manages user logins. It is responsible for:</para> - - <itemizedlist> - <listitem><para>Keeping track of users and sessions, their - processes and their idle state</para></listitem> - - <listitem><para>Providing PolicyKit-based access for users to - operations such as system shutdown or sleep</para></listitem> - - <listitem><para>Implementing a shutdown/sleep inhibition logic - for applications</para></listitem> - - <listitem><para>Handling of power/sleep hardware - keys</para></listitem> - - <listitem><para>Multi-seat management</para></listitem> - - <listitem><para>Session switch management</para></listitem> - - <listitem><para>Device access management for - users</para></listitem> - - <listitem><para>Automatic spawning of text logins (gettys) on - virtual console activation and user runtime directory - management</para></listitem> - </itemizedlist> - - <para>User sessions are registered in logind via the - <citerefentry><refentrytitle>pam_systemd</refentrytitle><manvolnum>8</manvolnum></citerefentry> - PAM module.</para> - - <para>See - <citerefentry><refentrytitle>logind.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for information about the configuration of this service.</para> - - <para>See <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/multiseat">Multi-Seat - on Linux</ulink> for an introduction into basic concepts of logind - such as users, sessions and seats.</para> - - <para>See the <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/logind"> - logind D-Bus API Documentation</ulink> for information about the - APIs <filename>systemd-logind</filename> provides.</para> - - <para>For more information on the inhibition logic see the <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/inhibit">Inhibitor - Lock Developer Documentation</ulink>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-user-sessions.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>loginctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>logind.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>pam_systemd</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-machine-id-commit.service.xml b/man/systemd-machine-id-commit.service.xml deleted file mode 100644 index 39da1922cc..0000000000 --- a/man/systemd-machine-id-commit.service.xml +++ /dev/null @@ -1,95 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2014 Didier Roche - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-machine-id-commit.service"> - - <refentryinfo> - <title>systemd-machine-id-commit.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Didier</firstname> - <surname>Roche</surname> - <email>didrocks@ubuntu.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-machine-id-commit.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-machine-id-commit.service</refname> - <refpurpose>Commit a transient machine ID to disk</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-machine-id-commit.service</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-machine-id-commit.service</filename> is an - early boot service responsible for committing transient - <filename>/etc/machine-id</filename> files to a writable disk file - system. See - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information about machine IDs.</para> - - <para>This service is started after - <filename>local-fs.target</filename> in case - <filename>/etc/machine-id</filename> is a mount point of its own - (usually from a memory file system such as - <literal>tmpfs</literal>) and /etc is writable. The service will - invoke <command>systemd-machine-id-setup --commit</command>, which - writes the current transient machine ID to disk and unmount the - <filename>/etc/machine-id</filename> file in a race-free manner to - ensure that file is always valid and accessible for other - processes. See - <citerefentry><refentrytitle>systemd-machine-id-setup</refentrytitle><manvolnum>1</manvolnum></citerefentry> - for details.</para> - - <para>The main use case of this service are systems where - <filename>/etc/machine-id</filename> is read-only and initially - not initialized. In this case, the system manager will generate a - transient machine ID file on a memory file system, and mount it - over <filename>/etc/machine-id</filename>, during the early boot - phase. This service is then invoked in a later boot phase, as soon - as <filename>/etc</filename> has been remounted writable and the - ID may thus be committed to disk to make it permanent.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-machine-id-setup</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-machine-id-setup.xml b/man/systemd-machine-id-setup.xml deleted file mode 100644 index bfcd74f436..0000000000 --- a/man/systemd-machine-id-setup.xml +++ /dev/null @@ -1,178 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-machine-id-setup" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-machine-id-setup</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - <author> - <contrib>Developer</contrib> - <firstname>Didier</firstname> - <surname>Roche</surname> - <email>didrocks@ubuntu.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-machine-id-setup</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-machine-id-setup</refname> - <refpurpose>Initialize the machine ID in /etc/machine-id</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-machine-id-setup</command> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-machine-id-setup</command> may be used by - system installer tools to initialize the machine ID stored in - <filename>/etc/machine-id</filename> at install time, with a - provisioned or randomly generated ID. See - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information about this file.</para> - - <para>If the tool is invoked without the <option>--commit</option> - switch, <filename>/etc/machine-id</filename> is initialized with a - valid, new machined ID if it is missing or empty. The new machine - ID will be acquired in the following fashion:</para> - - <orderedlist> - <listitem><para>If a valid D-Bus machine ID is already - configured for the system, the D-Bus machine ID is copied and - used to initialize the machine ID in - <filename>/etc/machine-id</filename>.</para></listitem> - - <listitem><para>If run inside a KVM virtual machine and a UUID - is was configured (via the <option>-uuid</option> - option), this UUID is used to initialize the machine ID. The - caller must ensure that the UUID passed is sufficiently unique - and is different for every booted instance of the - VM.</para></listitem> - - <listitem><para>Similarly, if run inside a Linux container - environment and a UUID is configured for the container, this is - used to initialize the machine ID. For details, see the - documentation of the <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/ContainerInterface">Container - Interface</ulink>.</para></listitem> - - <listitem><para>Otherwise, a new ID is randomly - generated.</para></listitem> - </orderedlist> - - <para>The <option>--commit</option> switch may be used to commit a - transient machined ID to disk, making it persistent. For details, - see below.</para> - - <para>Use - <citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry> - to initialize the machine ID on mounted (but not booted) system - images.</para> - - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - - <varlistentry> - <term><option>--root=<replaceable>root</replaceable></option></term> - <listitem><para>Takes a directory path as argument. All paths - operated will be prefixed with the given alternate - <replaceable>root</replaceable> path, including the path for - <filename>/etc/machine-id</filename> itself.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--commit</option></term> - <listitem><para>Commit a transient machine ID to disk. This - command may be used to convert a transient machine ID into a - persistent one. A transient machine ID file is one that was - bind mounted from a memory file system (usually - <literal>tmpfs</literal>) to - <filename>/etc/machine-id</filename> during the early phase of - the boot process. This may happen because - <filename>/etc</filename> is initially read-only and was - missing a valid machine ID file at that point.</para> - - <para>This command will execute no operation if - <filename>/etc/machine-id</filename> is not mounted from a - memory file system, or if <filename>/etc</filename> is - read-only. The command will write the current transient - machine ID to disk and unmount the - <filename>/etc/machine-id</filename> mount point in a - race-free manner to ensure that this file is always valid and - accessible for other processes.</para> - - <para>This command is primarily used by the - <citerefentry><refentrytitle>systemd-machine-id-commit.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - early boot service.</para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-machine-id-commit.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='dbus'><refentrytitle>dbus-uuidgen</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-machined.service.xml b/man/systemd-machined.service.xml deleted file mode 100644 index 999aeee1c6..0000000000 --- a/man/systemd-machined.service.xml +++ /dev/null @@ -1,90 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2013 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-machined.service" conditional='ENABLE_MACHINED'> - - <refentryinfo> - <title>systemd-machined.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-machined.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-machined.service</refname> - <refname>systemd-machined</refname> - <refpurpose>Virtual machine and container registration manager</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-machined.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-machined</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-machined</command> is a system service that - keeps track of virtual machines and containers, and processes - belonging to them.</para> - - <para>See - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry> - for some examples on how to run containers with OS tools.</para> - - <para>Use - <citerefentry><refentrytitle>nss-mymachines</refentrytitle><manvolnum>8</manvolnum></citerefentry> - to make the names of local containers known to - <command>systemd-machined</command> locally resolvable as host - names.</para> - - <para>See the - <ulink url="http://www.freedesktop.org/wiki/Software/systemd/machined"> - machined D-Bus API Documentation</ulink> for information about the - APIs <filename>systemd-machined</filename> provides.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machinectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>nss-mymachines</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-modules-load.service.xml b/man/systemd-modules-load.service.xml deleted file mode 100644 index b25929b2e4..0000000000 --- a/man/systemd-modules-load.service.xml +++ /dev/null @@ -1,96 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-modules-load.service" conditional='HAVE_KMOD'> - - <refentryinfo> - <title>systemd-modules-load.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-modules-load.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-modules-load.service</refname> - <refname>systemd-modules-load</refname> - <refpurpose>Load kernel modules at boot</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-modules-load.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-modules-load</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-modules-load.service</filename> is an - early boot service that loads kernel modules based on static - configuration.</para> - - <para>See - <citerefentry><refentrytitle>modules-load.d</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for information about the configuration of this service.</para> - - </refsect1> - - <refsect1> - <title>Kernel Command Line</title> - - <para><filename>systemd-modules-load.service</filename> - understands the following kernel command line parameters:</para> - - <variablelist class='kernel-commandline-options'> - - <varlistentry> - <term><varname>modules-load=</varname></term> - <term><varname>rd.modules-load=</varname></term> - - <listitem><para>Takes a comma-separated list of kernel modules - to statically load during early boot. The option prefixed with - <literal>rd.</literal> is read by the initial RAM disk - only.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>modules-load.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-networkd-wait-online.service.xml b/man/systemd-networkd-wait-online.service.xml deleted file mode 100644 index e21c805342..0000000000 --- a/man/systemd-networkd-wait-online.service.xml +++ /dev/null @@ -1,110 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Tom Gundersen - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-networkd-wait-online.service" conditional='ENABLE_NETWORKD'> - - <refentryinfo> - <title>systemd-networkd.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Tom</firstname> - <surname>Gundersen</surname> - <email>teg@jklm.no</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-networkd-wait-online.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-networkd-wait-online.service</refname> - <refname>systemd-networkd-wait-online</refname> - <refpurpose>Wait for network to come online</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-networkd-wait-online.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-networkd-wait-online</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-networkd-wait-online</command> is a - one-shot system service that waits for the network to be - configured. By default, it will wait for all links it is aware of - and which are managed by - <citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - to be fully configured or failed, and for at least one link to - gain a carrier.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>-i</option></term> - <term><option>--interface=</option></term> - - <listitem><para>Network interface to wait for before deciding - if the system is online. This is useful when a system has - several interfaces which will be configured, but a particular - one is necessary to access some network resources. This option - may be used more than once to wait for multiple network - interfaces. When used, all other interfaces are ignored. - </para></listitem> - </varlistentry> - <varlistentry> - <term><option>--ignore=</option></term> - <listitem><para>Network interfaces to be ignored when deciding - if the system is online. By default, only the loopback - interface is ignored. This option may be used more than once - to ignore multiple network interfaces. </para></listitem> - </varlistentry> - <varlistentry> - <term><option>--timeout=</option></term> - <listitem><para>Fail the service if the network is not online - by the time the timeout elapses. A timeout of 0 disables the - timeout. Defaults to 120 seconds. </para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-networkd.service.xml b/man/systemd-networkd.service.xml deleted file mode 100644 index 0bfe5519bc..0000000000 --- a/man/systemd-networkd.service.xml +++ /dev/null @@ -1,103 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2013 Tom Gundersen - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-networkd.service" conditional='ENABLE_NETWORKD'> - - <refentryinfo> - <title>systemd-networkd.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Tom</firstname> - <surname>Gundersen</surname> - <email>teg@jklm.no</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-networkd.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-networkd.service</refname> - <refname>systemd-networkd</refname> - <refpurpose>Network manager</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-networkd.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-networkd</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-networkd</command> is a system service that - manages networks. It detects and configures network devices as - they appear, as well as creating virtual network devices.</para> - - <para>To configure low-level link settings independently of - networks, see - <citerefentry><refentrytitle>systemd.link</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - - <para>Network configurations applied before networkd is started - are not removed, and static configuration applied by networkd is - not removed when networkd exits. Dynamic configuration applied by - networkd may also optionally be left in place on shutdown. This - ensures restarting networkd does not cut the network connection, - and, in particular, that it is safe to transition between the - initrd and the real root, and back.</para> - </refsect1> - - <refsect1><title>Configuration Files</title> - <para>The configuration files are read from the files located in the - system network directory <filename>/usr/lib/systemd/network</filename>, - the volatile runtime network directory - <filename>/run/systemd/network</filename> and the local administration - network directory <filename>/etc/systemd/network</filename>.</para> - - <para>Networks are configured in <filename>.network</filename> - files, see - <citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - and virtual network devices are configured in - <filename>.netdev</filename> files, see - <citerefentry><refentrytitle>systemd.netdev</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.link</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.netdev</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-networkd-wait-online.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-notify.xml b/man/systemd-notify.xml deleted file mode 100644 index a5f4077166..0000000000 --- a/man/systemd-notify.xml +++ /dev/null @@ -1,185 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-notify" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-notify</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-notify</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-notify</refname> - <refpurpose>Notify service manager about start-up completion and other daemon status changes</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-notify <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="opt" rep="repeat">VARIABLE=VALUE</arg></command> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-notify</command> may be called by daemon - scripts to notify the init system about status changes. It can be - used to send arbitrary information, encoded in an - environment-block-like list of strings. Most importantly, it can be - used for start-up completion notification.</para> - - <para>This is mostly just a wrapper around - <function>sd_notify()</function> and makes this functionality - available to shell scripts. For details see - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - </para> - - <para>The command line may carry a list of environment variables - to send as part of the status update.</para> - - <para>Note that systemd will refuse reception of status updates - from this command unless <varname>NotifyAccess=all</varname> is - set for the service unit this command is called from.</para> - - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--ready</option></term> - - <listitem><para>Inform the init system about service start-up - completion. This is equivalent to <command>systemd-notify - READY=1</command>. For details about the semantics of this - option see - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--pid=</option></term> - - <listitem><para>Inform the init system about the main PID of - the daemon. Takes a PID as argument. If the argument is - omitted, the PID of the process that invoked - <command>systemd-notify</command> is used. This is equivalent - to <command>systemd-notify MAINPID=$PID</command>. For details - about the semantics of this option see - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--status=</option></term> - - <listitem><para>Send a free-form status string for the daemon - to the init systemd. This option takes the status string as - argument. This is equivalent to <command>systemd-notify - STATUS=...</command>. For details about the semantics of this - option see - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--booted</option></term> - - <listitem><para>Returns 0 if the system was booted up with - systemd, non-zero otherwise. If this option is passed, no - message is sent. This option is hence unrelated to the other - options. For details about the semantics of this option, see - <citerefentry><refentrytitle>sd_booted</refentrytitle><manvolnum>3</manvolnum></citerefentry>. An - alternate way to check for this state is to call - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - with the <command>is-system-running</command> command. It will - return <literal>offline</literal> if the system was not booted - with systemd. </para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <refsect1> - <title>Example</title> - - <example> - <title>Start-up Notification and Status Updates</title> - - <para>A simple shell daemon that sends start-up notifications - after having set up its communication channel. During runtime it - sends further status updates to the init system:</para> - - <programlisting>#!/bin/bash - -mkfifo /tmp/waldo -systemd-notify --ready --status="Waiting for data..." - -while : ; do - read a < /tmp/waldo - systemd-notify --status="Processing $a" - - # Do something with $a ... - - systemd-notify --status="Waiting for data..." -done</programlisting> - </example> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_booted</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-nspawn.xml b/man/systemd-nspawn.xml deleted file mode 100644 index 476cc2932f..0000000000 --- a/man/systemd-nspawn.xml +++ /dev/null @@ -1,1066 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-nspawn" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-nspawn</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-nspawn</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-nspawn</refname> - <refpurpose>Spawn a namespace container for debugging, testing and building</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-nspawn</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="opt"><replaceable>COMMAND</replaceable> - <arg choice="opt" rep="repeat">ARGS</arg> - </arg> - </cmdsynopsis> - <cmdsynopsis> - <command>systemd-nspawn</command> - <arg choice="plain">--boot</arg> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="opt" rep="repeat">ARGS</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-nspawn</command> may be used to run a - command or OS in a light-weight namespace container. In many ways - it is similar to - <citerefentry project='man-pages'><refentrytitle>chroot</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - but more powerful since it fully virtualizes the file system - hierarchy, as well as the process tree, the various IPC subsystems - and the host and domain name.</para> - - <para><command>systemd-nspawn</command> limits access to various - kernel interfaces in the container to read-only, such as - <filename>/sys</filename>, <filename>/proc/sys</filename> or - <filename>/sys/fs/selinux</filename>. Network interfaces and the - system clock may not be changed from within the container. Device - nodes may not be created. The host system cannot be rebooted and - kernel modules may not be loaded from within the container.</para> - - <para>Note that even though these security precautions are taken - <command>systemd-nspawn</command> is not suitable for fully secure - container setups. Many of the security features may be - circumvented and are hence primarily useful to avoid accidental - changes to the host system from the container.</para> - - <para>In contrast to - <citerefentry project='man-pages'><refentrytitle>chroot</refentrytitle><manvolnum>1</manvolnum></citerefentry> <command>systemd-nspawn</command> - may be used to boot full Linux-based operating systems in a - container.</para> - - <para>Use a tool like - <citerefentry project='mankier'><refentrytitle>dnf</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>debootstrap</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - or - <citerefentry project='archlinux'><refentrytitle>pacman</refentrytitle><manvolnum>8</manvolnum></citerefentry> - to set up an OS directory tree suitable as file system hierarchy - for <command>systemd-nspawn</command> containers.</para> - - <para>Note that <command>systemd-nspawn</command> will mount file - systems private to the container to <filename>/dev</filename>, - <filename>/run</filename> and similar. These will not be visible - outside of the container, and their contents will be lost when the - container exits.</para> - - <para>Note that running two <command>systemd-nspawn</command> - containers from the same directory tree will not make processes in - them see each other. The PID namespace separation of the two - containers is complete and the containers will share very few - runtime objects except for the underlying file system. Use - <citerefentry><refentrytitle>machinectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s - <command>login</command> command to request an additional login - prompt in a running container.</para> - - <para><command>systemd-nspawn</command> implements the - <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/ContainerInterface">Container - Interface</ulink> specification.</para> - - <para>As a safety check <command>systemd-nspawn</command> will - verify the existence of <filename>/usr/lib/os-release</filename> - or <filename>/etc/os-release</filename> in the container tree - before starting the container (see - <citerefentry><refentrytitle>os-release</refentrytitle><manvolnum>5</manvolnum></citerefentry>). - It might be necessary to add this file to the container tree - manually if the OS of the container is too old to contain this - file out-of-the-box.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>If option <option>-b</option> is specified, the arguments - are used as arguments for the init binary. Otherwise, - <replaceable>COMMAND</replaceable> specifies the program to launch - in the container, and the remaining arguments are used as - arguments for this program. If <option>-b</option> is not used and - no arguments are specified, a shell is launched in the - container.</para> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>-D</option></term> - <term><option>--directory=</option></term> - - <listitem><para>Directory to use as file system root for the - container.</para> - - <para>If neither <option>--directory=</option>, nor - <option>--image=</option> is specified the directory is - determined by searching for a directory named the same as the - machine name specified with <option>--machine=</option>. See - <citerefentry><refentrytitle>machinectl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - section "Files and Directories" for the precise search path.</para> - - <para>If neither <option>--directory=</option>, - <option>--image=</option>, nor <option>--machine=</option> - are specified, the current directory will - be used. May not be specified together with - <option>--image=</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--template=</option></term> - - <listitem><para>Directory or <literal>btrfs</literal> - subvolume to use as template for the container's root - directory. If this is specified and the container's root - directory (as configured by <option>--directory=</option>) - does not yet exist it is created as <literal>btrfs</literal> - subvolume and populated from this template tree. Ideally, the - specified template path refers to the root of a - <literal>btrfs</literal> subvolume, in which case a simple - copy-on-write snapshot is taken, and populating the root - directory is instant. If the specified template path does not - refer to the root of a <literal>btrfs</literal> subvolume (or - not even to a <literal>btrfs</literal> file system at all), - the tree is copied, which can be substantially more - time-consuming. Note that if this option is used the - container's root directory (in contrast to the template - directory!) must be located on a <literal>btrfs</literal> file - system, so that the <literal>btrfs</literal> subvolume may be - created. May not be specified together with - <option>--image=</option> or - <option>--ephemeral</option>.</para> - - <para>Note that this switch leaves host name, machine ID and - all other settings that could identify the instance - unmodified.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-x</option></term> - <term><option>--ephemeral</option></term> - - <listitem><para>If specified, the container is run with a - temporary <literal>btrfs</literal> snapshot of its root - directory (as configured with <option>--directory=</option>), - that is removed immediately when the container terminates. - This option is only supported if the root file system is - <literal>btrfs</literal>. May not be specified together with - <option>--image=</option> or - <option>--template=</option>.</para> - <para>Note that this switch leaves host name, machine ID and - all other settings that could identify the instance - unmodified.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-i</option></term> - <term><option>--image=</option></term> - - <listitem><para>Disk image to mount the root directory for the - container from. Takes a path to a regular file or to a block - device node. The file or block device must contain - either:</para> - - <itemizedlist> - <listitem><para>An MBR partition table with a single - partition of type 0x83 that is marked - bootable.</para></listitem> - - <listitem><para>A GUID partition table (GPT) with a single - partition of type - 0fc63daf-8483-4772-8e79-3d69d8477de4.</para></listitem> - - <listitem><para>A GUID partition table (GPT) with a marked - root partition which is mounted as the root directory of the - container. Optionally, GPT images may contain a home and/or - a server data partition which are mounted to the appropriate - places in the container. All these partitions must be - identified by the partition types defined by the <ulink - url="http://www.freedesktop.org/wiki/Specifications/DiscoverablePartitionsSpec/">Discoverable - Partitions Specification</ulink>.</para></listitem> - </itemizedlist> - - <para>Any other partitions, such as foreign partitions, swap - partitions or EFI system partitions are not mounted. May not - be specified together with <option>--directory=</option>, - <option>--template=</option> or - <option>--ephemeral</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-a</option></term> - <term><option>--as-pid2</option></term> - - <listitem><para>Invoke the shell or specified program as process ID (PID) 2 instead of PID 1 (init). By - default, if neither this option nor <option>--boot</option> is used, the selected binary is run as process with - PID 1, a mode only suitable for programs that are aware of the special semantics that the process with PID 1 - has on UNIX. For example, it needs to reap all processes reparented to it, and should implement - <command>sysvinit</command> compatible signal handling (specifically: it needs to reboot on SIGINT, reexecute - on SIGTERM, reload configuration on SIGHUP, and so on). With <option>--as-pid2</option> a minimal stub init - process is run as PID 1 and the selected binary is executed as PID 2 (and hence does not need to implement any - special semantics). The stub init process will reap processes as necessary and react appropriately to - signals. It is recommended to use this mode to invoke arbitrary commands in containers, unless they have been - modified to run correctly as PID 1. Or in other words: this switch should be used for pretty much all commands, - except when the command refers to an init or shell implementation, as these are generally capable of running - correctly as PID 1. This option may not be combined with <option>--boot</option> or - <option>--share-system</option>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-b</option></term> - <term><option>--boot</option></term> - - <listitem><para>Automatically search for an init binary and invoke it as PID 1, instead of a shell or a user - supplied program. If this option is used, arguments specified on the command line are used as arguments for the - init binary. This option may not be combined with <option>--as-pid2</option> or - <option>--share-system</option>.</para> - - <para>The following table explains the different modes of invocation and relationship to - <option>--as-pid2</option> (see above):</para> - - <table> - <title>Invocation Mode</title> - <tgroup cols='2' align='left' colsep='1' rowsep='1'> - <colspec colname="switch" /> - <colspec colname="explanation" /> - <thead> - <row> - <entry>Switch</entry> - <entry>Explanation</entry> - </row> - </thead> - <tbody> - <row> - <entry>Neither <option>--as-pid2</option> nor <option>--boot</option> specified</entry> - <entry>The passed parameters are interpreted as the command line, which is executed as PID 1 in the container.</entry> - </row> - - <row> - <entry><option>--as-pid2</option> specified</entry> - <entry>The passed parameters are interpreted as the command line, which is executed as PID 2 in the container. A stub init process is run as PID 1.</entry> - </row> - - <row> - <entry><option>--boot</option> specified</entry> - <entry>An init binary as automatically searched and run as PID 1 in the container. The passed parameters are used as invocation parameters for this process.</entry> - </row> - - </tbody> - </tgroup> - </table> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--chdir=</option></term> - - <listitem><para>Change to the specified working directory before invoking the process in the container. Expects - an absolute path in the container's file system namespace.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-u</option></term> - <term><option>--user=</option></term> - - <listitem><para>After transitioning into the container, change - to the specified user-defined in the container's user - database. Like all other systemd-nspawn features, this is not - a security feature and provides protection against accidental - destructive operations only.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-M</option></term> - <term><option>--machine=</option></term> - - <listitem><para>Sets the machine name for this container. This - name may be used to identify this container during its runtime - (for example in tools like - <citerefentry><refentrytitle>machinectl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - and similar), and is used to initialize the container's - hostname (which the container can choose to override, - however). If not specified, the last component of the root - directory path of the container is used, possibly suffixed - with a random identifier in case <option>--ephemeral</option> - mode is selected. If the root directory selected is the host's - root directory the host's hostname is used as default - instead.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--uuid=</option></term> - - <listitem><para>Set the specified UUID for the container. The - init system will initialize - <filename>/etc/machine-id</filename> from this if this file is - not set yet. Note that this option takes effect only if - <filename>/etc/machine-id</filename> in the container is - unpopulated.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--slice=</option></term> - - <listitem><para>Make the container part of the specified - slice, instead of the default - <filename>machine.slice</filename>. This is only applies if - the machine is run in its own scope unit, i.e. if - <option>--keep-unit</option> is not used.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--property=</option></term> - - <listitem><para>Set a unit property on the scope unit to - register for the machine. This only applies if the machine is - run in its own scope unit, i.e. if - <option>--keep-unit</option> is not used. Takes unit property - assignments in the same format as <command>systemctl - set-property</command>. This is useful to set memory limits - and similar for machines.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--private-users=</option></term> - - <listitem><para>Controls user namespacing. If enabled, the container will run with its own private set of UNIX - user and group ids (UIDs and GIDs). This involves mapping the private UIDs/GIDs used in the container (starting - with the container's root user 0 and up) to a range of UIDs/GIDs on the host that are not used for other - purposes (usually in the range beyond the host's UID/GID 65536). The parameter may be specified as follows:</para> - - <orderedlist> - <listitem><para>The value <literal>no</literal> turns off user namespacing. This is the default.</para></listitem> - - <listitem><para>The value <literal>yes</literal> (or the omission of a parameter) turns on user - namespacing. The UID/GID range to use is determined automatically from the file ownership of the root - directory of the container's directory tree. To use this option, make sure to prepare the directory tree in - advance, and ensure that all files and directories in it are owned by UIDs/GIDs in the range you'd like to - use. Also, make sure that used file ACLs exclusively reference UIDs/GIDs in the appropriate range. If this - mode is used the number of UIDs/GIDs assigned to the container for use is 65536, and the UID/GID of the - root directory must be a multiple of 65536.</para></listitem> - - <listitem><para>The value "pick" turns on user namespacing. In this case the UID/GID range is automatically - chosen. As first step, the file owner of the root directory of the container's directory tree is read, and it - is checked that it is currently not used by the system otherwise (in particular, that no other container is - using it). If this check is successful, the UID/GID range determined this way is used, similar to the - behaviour if "yes" is specified. If the check is not successful (and thus the UID/GID range indicated in the - root directory's file owner is already used elsewhere) a new – currently unused – UID/GID range of 65536 - UIDs/GIDs is randomly chosen between the host UID/GIDs of 524288 and 1878982656, always starting at a - multiple of 65536. This setting implies <option>--private-users-chown</option> (see below), which has the - effect that the files and directories in the container's directory tree will be owned by the appropriate - users of the range picked. Using this option makes user namespace behaviour fully automatic. Note that the - first invocation of a previously unused container image might result in picking a new UID/GID range for it, - and thus in the (possibly expensive) file ownership adjustment operation. However, subsequent invocations of - the container will be cheap (unless of course the picked UID/GID range is assigned to a different use by - then).</para></listitem> - - <listitem><para>Finally if one or two colon-separated numeric parameters are specified, user namespacing is - turned on, too. The first parameter specifies the first host UID/GID to assign to the container, the second - parameter specifies the number of host UIDs/GIDs to assign to the container. If the second parameter is - omitted, 65536 UIDs/GIDs are assigned.</para></listitem> - </orderedlist> - - <para>It is recommended to assign at least 65536 UIDs/GIDs to each container, so that the usable UID/GID range in the - container covers 16 bit. For best security, do not assign overlapping UID/GID ranges to multiple containers. It is - hence a good idea to use the upper 16 bit of the host 32-bit UIDs/GIDs as container identifier, while the lower 16 - bit encode the container UID/GID used. This is in fact the behaviour enforced by the - <option>--private-users=pick</option> option.</para> - - <para>When user namespaces are used, the GID range assigned to each container is always chosen identical to the - UID range.</para> - - <para>In most cases, using <option>--private-users=pick</option> is the recommended option as it enhances - container security massively and operates fully automatically in most cases.</para> - - <para>Note that the picked UID/GID range is not written to <filename>/etc/passwd</filename> or - <filename>/etc/group</filename>. In fact, the allocation of the range is not stored persistently anywhere, - except in the file ownership of the files and directories of the container.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-U</option></term> - - <listitem><para>If the kernel supports the user namespaces feature, equivalent to - <option>--private-users=pick</option>, otherwise equivalent to - <option>--private-users=no</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--private-users-chown</option></term> - - <listitem><para>If specified, all files and directories in the container's directory tree will adjusted so that - they are owned to the appropriate UIDs/GIDs selected for the container (see above). This operation is - potentially expensive, as it involves descending and iterating through the full directory tree of the - container. Besides actual file ownership, file ACLs are adjusted as well.</para> - - <para>This option is implied if <option>--private-users=pick</option> is used. This option has no effect if - user namespacing is not used.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--private-network</option></term> - - <listitem><para>Disconnect networking of the container from - the host. This makes all network interfaces unavailable in the - container, with the exception of the loopback device and those - specified with <option>--network-interface=</option> and - configured with <option>--network-veth</option>. If this - option is specified, the CAP_NET_ADMIN capability will be - added to the set of capabilities the container retains. The - latter may be disabled by using - <option>--drop-capability=</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--network-interface=</option></term> - - <listitem><para>Assign the specified network interface to the - container. This will remove the specified interface from the - calling namespace and place it in the container. When the - container terminates, it is moved back to the host namespace. - Note that <option>--network-interface=</option> implies - <option>--private-network</option>. This option may be used - more than once to add multiple network interfaces to the - container.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--network-macvlan=</option></term> - - <listitem><para>Create a <literal>macvlan</literal> interface - of the specified Ethernet network interface and add it to the - container. A <literal>macvlan</literal> interface is a virtual - interface that adds a second MAC address to an existing - physical Ethernet link. The interface in the container will be - named after the interface on the host, prefixed with - <literal>mv-</literal>. Note that - <option>--network-macvlan=</option> implies - <option>--private-network</option>. This option may be used - more than once to add multiple network interfaces to the - container.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--network-ipvlan=</option></term> - - <listitem><para>Create an <literal>ipvlan</literal> interface - of the specified Ethernet network interface and add it to the - container. An <literal>ipvlan</literal> interface is a virtual - interface, similar to a <literal>macvlan</literal> interface, - which uses the same MAC address as the underlying interface. - The interface in the container will be named after the - interface on the host, prefixed with <literal>iv-</literal>. - Note that <option>--network-ipvlan=</option> implies - <option>--private-network</option>. This option may be used - more than once to add multiple network interfaces to the - container.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-n</option></term> - <term><option>--network-veth</option></term> - - <listitem><para>Create a virtual Ethernet link (<literal>veth</literal>) between host and container. The host - side of the Ethernet link will be available as a network interface named after the container's name (as - specified with <option>--machine=</option>), prefixed with <literal>ve-</literal>. The container side of the - Ethernet link will be named <literal>host0</literal>. The <option>--network-veth</option> option implies - <option>--private-network</option>.</para> - - <para>Note that - <citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - includes by default a network file <filename>/usr/lib/systemd/network/80-container-ve.network</filename> - matching the host-side interfaces created this way, which contains settings to enable automatic address - provisioning on the created virtual link via DHCP, as well as automatic IP routing onto the host's external - network interfaces. It also contains <filename>/usr/lib/systemd/network/80-container-host0.network</filename> - matching the container-side interface created this way, containing settings to enable client side address - assignment via DHCP. In case <filename>systemd-networkd</filename> is running on both the host and inside the - container, automatic IP communication from the container to the host is thus available, with further - connectivity to the external network.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--network-veth-extra=</option></term> - - <listitem><para>Adds an additional virtual Ethernet link - between host and container. Takes a colon-separated pair of - host interface name and container interface name. The latter - may be omitted in which case the container and host sides will - be assigned the same name. This switch is independent of - <option>--network-veth</option>, and — in contrast — may be - used multiple times, and allows configuration of the network - interface names. Note that <option>--network-bridge=</option> - has no effect on interfaces created with - <option>--network-veth-extra=</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--network-bridge=</option></term> - - <listitem><para>Adds the host side of the Ethernet link created with <option>--network-veth</option> to the - specified Ethernet bridge interface. Expects a valid network interface name of a bridge device as - argument. Note that <option>--network-bridge=</option> implies <option>--network-veth</option>. If this option - is used, the host side of the Ethernet link will use the <literal>vb-</literal> prefix instead of - <literal>ve-</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--network-zone=</option></term> - - <listitem><para>Creates a virtual Ethernet link (<literal>veth</literal>) to the container and adds it to an - automatically managed Ethernet bridge interface. The bridge interface is named after the passed argument, - prefixed with <literal>vz-</literal>. The bridge interface is automatically created when the first container - configured for its name is started, and is automatically removed when the last container configured for its - name exits. Hence, each bridge interface configured this way exists only as long as there's at least one - container referencing it running. This option is very similar to <option>--network-bridge=</option>, besides - this automatic creation/removal of the bridge device.</para> - - <para>This setting makes it easy to place multiple related containers on a common, virtual Ethernet-based - broadcast domain, here called a "zone". Each container may only be part of one zone, but each zone may contain - any number of containers. Each zone is referenced by its name. Names may be chosen freely (as long as they form - valid network interface names when prefixed with <literal>vz-</literal>), and it is sufficient to pass the same - name to the <option>--network-zones=</option> switch of the various concurrently running containers to join - them in one zone.</para> - - <para>Note that - <citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - includes by default a network file <filename>/usr/lib/systemd/network/80-container-vz.network</filename> - matching the bridge interfaces created this way, which contains settings to enable automatic address - provisioning on the created virtual network via DHCP, as well as automatic IP routing onto the host's external - network interfaces. Using <option>--network-zone=</option> is hence in most cases fully automatic and - sufficient to connect multiple local containers in a joined broadcast domain to the host, with further - connectivity to the external network.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-p</option></term> - <term><option>--port=</option></term> - - <listitem><para>If private networking is enabled, maps an IP - port on the host onto an IP port on the container. Takes a - protocol specifier (either <literal>tcp</literal> or - <literal>udp</literal>), separated by a colon from a host port - number in the range 1 to 65535, separated by a colon from a - container port number in the range from 1 to 65535. The - protocol specifier and its separating colon may be omitted, in - which case <literal>tcp</literal> is assumed. The container - port number and its colon may be omitted, in which case the - same port as the host port is implied. This option is only - supported if private networking is used, such as with - <option>--network-veth</option>, <option>--network-zone=</option> - <option>--network-bridge=</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-Z</option></term> - <term><option>--selinux-context=</option></term> - - <listitem><para>Sets the SELinux security context to be used - to label processes in the container.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-L</option></term> - <term><option>--selinux-apifs-context=</option></term> - - <listitem><para>Sets the SELinux security context to be used - to label files in the virtual API file systems in the - container.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--capability=</option></term> - - <listitem><para>List one or more additional capabilities to - grant the container. Takes a comma-separated list of - capability names, see - <citerefentry project='man-pages'><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for more information. Note that the following capabilities - will be granted in any way: CAP_CHOWN, CAP_DAC_OVERRIDE, - CAP_DAC_READ_SEARCH, CAP_FOWNER, CAP_FSETID, CAP_IPC_OWNER, - CAP_KILL, CAP_LEASE, CAP_LINUX_IMMUTABLE, - CAP_NET_BIND_SERVICE, CAP_NET_BROADCAST, CAP_NET_RAW, - CAP_SETGID, CAP_SETFCAP, CAP_SETPCAP, CAP_SETUID, - CAP_SYS_ADMIN, CAP_SYS_CHROOT, CAP_SYS_NICE, CAP_SYS_PTRACE, - CAP_SYS_TTY_CONFIG, CAP_SYS_RESOURCE, CAP_SYS_BOOT, - CAP_AUDIT_WRITE, CAP_AUDIT_CONTROL. Also CAP_NET_ADMIN is - retained if <option>--private-network</option> is specified. - If the special value <literal>all</literal> is passed, all - capabilities are retained.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--drop-capability=</option></term> - - <listitem><para>Specify one or more additional capabilities to - drop for the container. This allows running the container with - fewer capabilities than the default (see - above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--kill-signal=</option></term> - - <listitem><para>Specify the process signal to send to the - container's PID 1 when nspawn itself receives SIGTERM, in - order to trigger an orderly shutdown of the - container. Defaults to SIGRTMIN+3 if <option>--boot</option> - is used (on systemd-compatible init systems SIGRTMIN+3 - triggers an orderly shutdown). For a list of valid signals, see - <citerefentry project='man-pages'><refentrytitle>signal</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--link-journal=</option></term> - - <listitem><para>Control whether the container's journal shall - be made visible to the host system. If enabled, allows viewing - the container's journal files from the host (but not vice - versa). Takes one of <literal>no</literal>, - <literal>host</literal>, <literal>try-host</literal>, - <literal>guest</literal>, <literal>try-guest</literal>, - <literal>auto</literal>. If <literal>no</literal>, the journal - is not linked. If <literal>host</literal>, the journal files - are stored on the host file system (beneath - <filename>/var/log/journal/<replaceable>machine-id</replaceable></filename>) - and the subdirectory is bind-mounted into the container at the - same location. If <literal>guest</literal>, the journal files - are stored on the guest file system (beneath - <filename>/var/log/journal/<replaceable>machine-id</replaceable></filename>) - and the subdirectory is symlinked into the host at the same - location. <literal>try-host</literal> and - <literal>try-guest</literal> do the same but do not fail if - the host does not have persistent journalling enabled. If - <literal>auto</literal> (the default), and the right - subdirectory of <filename>/var/log/journal</filename> exists, - it will be bind mounted into the container. If the - subdirectory does not exist, no linking is performed. - Effectively, booting a container once with - <literal>guest</literal> or <literal>host</literal> will link - the journal persistently if further on the default of - <literal>auto</literal> is used.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-j</option></term> - - <listitem><para>Equivalent to - <option>--link-journal=try-guest</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--read-only</option></term> - - <listitem><para>Mount the root file system read-only for the - container.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--bind=</option></term> - <term><option>--bind-ro=</option></term> - - <listitem><para>Bind mount a file or directory from the host - into the container. Takes one of: a path argument — in which - case the specified path will be mounted from the host to the - same path in the container —, or a colon-separated pair of - paths — in which case the first specified path is the source - in the host, and the second path is the destination in the - container —, or a colon-separated triple of source path, - destination path and mount options. Mount options are - comma-separated and currently, only "rbind" and "norbind" - are allowed. Defaults to "rbind". Backslash escapes are interpreted, so - <literal>\:</literal> may be used to embed colons in either path. - This option may be specified multiple times for - creating multiple independent bind mount points. The - <option>--bind-ro=</option> option creates read-only bind - mounts.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--tmpfs=</option></term> - - <listitem><para>Mount a tmpfs file system into the container. - Takes a single absolute path argument that specifies where to - mount the tmpfs instance to (in which case the directory - access mode will be chosen as 0755, owned by root/root), or - optionally a colon-separated pair of path and mount option - string that is used for mounting (in which case the kernel - default for access mode and owner will be chosen, unless - otherwise specified). This option is particularly useful for - mounting directories such as <filename>/var</filename> as - tmpfs, to allow state-less systems, in particular when - combined with <option>--read-only</option>. - Backslash escapes are interpreted in the path, so - <literal>\:</literal> may be used to embed colons in the path. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--overlay=</option></term> - <term><option>--overlay-ro=</option></term> - - <listitem><para>Combine multiple directory trees into one - overlay file system and mount it into the container. Takes a - list of colon-separated paths to the directory trees to - combine and the destination mount point.</para> - - <para>Backslash escapes are interpreted in the paths, so - <literal>\:</literal> may be used to embed colons in the paths. - </para> - - <para>If three or more paths are specified, then the last - specified path is the destination mount point in the - container, all paths specified before refer to directory trees - on the host and are combined in the specified order into one - overlay file system. The left-most path is hence the lowest - directory tree, the second-to-last path the highest directory - tree in the stacking order. If <option>--overlay-ro=</option> - is used instead of <option>--overlay=</option>, a read-only - overlay file system is created. If a writable overlay file - system is created, all changes made to it are written to the - highest directory tree in the stacking order, i.e. the - second-to-last specified.</para> - - <para>If only two paths are specified, then the second - specified path is used both as the top-level directory tree in - the stacking order as seen from the host, as well as the mount - point for the overlay file system in the container. At least - two paths have to be specified.</para> - - <para>For details about overlay file systems, see <ulink - url="https://www.kernel.org/doc/Documentation/filesystems/overlayfs.txt">overlayfs.txt</ulink>. Note - that the semantics of overlay file systems are substantially - different from normal file systems, in particular regarding - reported device and inode information. Device and inode - information may change for a file while it is being written - to, and processes might see out-of-date versions of files at - times. Note that this switch automatically derives the - <literal>workdir=</literal> mount option for the overlay file - system from the top-level directory tree, making it a sibling - of it. It is hence essential that the top-level directory tree - is not a mount point itself (since the working directory must - be on the same file system as the top-most directory - tree). Also note that the <literal>lowerdir=</literal> mount - option receives the paths to stack in the opposite order of - this switch.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-E <replaceable>NAME</replaceable>=<replaceable>VALUE</replaceable></option></term> - <term><option>--setenv=<replaceable>NAME</replaceable>=<replaceable>VALUE</replaceable></option></term> - - <listitem><para>Specifies an environment variable assignment - to pass to the init process in the container, in the format - <literal>NAME=VALUE</literal>. This may be used to override - the default variables or to set additional variables. This - parameter may be used more than once.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--share-system</option></term> - - <listitem><para>Allows the container to share certain system - facilities with the host. More specifically, this turns off - PID namespacing, UTS namespacing and IPC namespacing, and thus - allows the guest to see and interact more easily with - processes outside of the container. Note that using this - option makes it impossible to start up a full Operating System - in the container, as an init system cannot operate in this - mode. It is only useful to run specific programs or - applications this way, without involving an init system in the - container. This option implies <option>--register=no</option>. - This option may not be combined with - <option>--boot</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--register=</option></term> - - <listitem><para>Controls whether the container is registered - with - <citerefentry><refentrytitle>systemd-machined</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - Takes a boolean argument, which defaults to <literal>yes</literal>. - This option should be enabled when the container runs a full - Operating System (more specifically: an init system), and is - useful to ensure that the container is accessible via - <citerefentry><refentrytitle>machinectl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - and shown by tools such as - <citerefentry project='man-pages'><refentrytitle>ps</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - If the container does not run an init system, it is - recommended to set this option to <literal>no</literal>. Note - that <option>--share-system</option> implies - <option>--register=no</option>. </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--keep-unit</option></term> - - <listitem><para>Instead of creating a transient scope unit to - run the container in, simply register the service or scope - unit <command>systemd-nspawn</command> has been invoked in - with - <citerefentry><refentrytitle>systemd-machined</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - This has no effect if <option>--register=no</option> is used. - This switch should be used if - <command>systemd-nspawn</command> is invoked from within a - service unit, and the service unit's sole purpose is to run a - single <command>systemd-nspawn</command> container. This - option is not available if run from a user - session.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--personality=</option></term> - - <listitem><para>Control the architecture ("personality") - reported by - <citerefentry project='man-pages'><refentrytitle>uname</refentrytitle><manvolnum>2</manvolnum></citerefentry> - in the container. Currently, only <literal>x86</literal> and - <literal>x86-64</literal> are supported. This is useful when - running a 32-bit container on a 64-bit host. If this setting - is not used, the personality reported in the container is the - same as the one reported on the host.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-q</option></term> - <term><option>--quiet</option></term> - - <listitem><para>Turns off any status output by the tool - itself. When this switch is used, the only output from nspawn - will be the console output of the container OS - itself.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--volatile</option></term> - <term><option>--volatile=</option><replaceable>MODE</replaceable></term> - - <listitem><para>Boots the container in volatile mode. When no - mode parameter is passed or when mode is specified as - <option>yes</option>, full volatile mode is enabled. This - means the root directory is mounted as a mostly unpopulated - <literal>tmpfs</literal> instance, and - <filename>/usr</filename> from the OS tree is mounted into it - in read-only mode (the system thus starts up with read-only OS - resources, but pristine state and configuration, any changes - to the either are lost on shutdown). When the mode parameter - is specified as <option>state</option>, the OS tree is - mounted read-only, but <filename>/var</filename> is mounted as - a <literal>tmpfs</literal> instance into it (the system thus - starts up with read-only OS resources and configuration, but - pristine state, and any changes to the latter are lost on - shutdown). When the mode parameter is specified as - <option>no</option> (the default), the whole OS tree is made - available writable.</para> - - <para>Note that setting this to <option>yes</option> or - <option>state</option> will only work correctly with - operating systems in the container that can boot up with only - <filename>/usr</filename> mounted, and are able to populate - <filename>/var</filename> automatically, as - needed.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--settings=</option><replaceable>MODE</replaceable></term> - - <listitem><para>Controls whether - <command>systemd-nspawn</command> shall search for and use - additional per-container settings from - <filename>.nspawn</filename> files. Takes a boolean or the - special values <option>override</option> or - <option>trusted</option>.</para> - - <para>If enabled (the default), a settings file named after the - machine (as specified with the <option>--machine=</option> - setting, or derived from the directory or image file name) - with the suffix <filename>.nspawn</filename> is searched in - <filename>/etc/systemd/nspawn/</filename> and - <filename>/run/systemd/nspawn/</filename>. If it is found - there, its settings are read and used. If it is not found - there, it is subsequently searched in the same directory as the - image file or in the immediate parent of the root directory of - the container. In this case, if the file is found, its settings - will be also read and used, but potentially unsafe settings - are ignored. Note that in both these cases, settings on the - command line take precedence over the corresponding settings - from loaded <filename>.nspawn</filename> files, if both are - specified. Unsafe settings are considered all settings that - elevate the container's privileges or grant access to - additional resources such as files or directories of the - host. For details about the format and contents of - <filename>.nspawn</filename> files, consult - <citerefentry><refentrytitle>systemd.nspawn</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - - <para>If this option is set to <option>override</option>, the - file is searched, read and used the same way, however, the order of - precedence is reversed: settings read from the - <filename>.nspawn</filename> file will take precedence over - the corresponding command line options, if both are - specified.</para> - - <para>If this option is set to <option>trusted</option>, the - file is searched, read and used the same way, but regardless - of being found in <filename>/etc/systemd/nspawn/</filename>, - <filename>/run/systemd/nspawn/</filename> or next to the image - file or container root directory, all settings will take - effect, however, command line arguments still take precedence - over corresponding settings.</para> - - <para>If disabled, no <filename>.nspawn</filename> file is read - and no settings except the ones on the command line are in - effect.</para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - - </refsect1> - - <refsect1> - <title>Examples</title> - - <example> - <title>Build and boot a minimal BLAG distribution in a container</title> - - <programlisting># dnf -y --releasever=210k --installroot=/srv/mycontainer --disablerepo='*' --enablerepo=blag --enablerepo=updates install systemd passwd dnf blag-release vim-minimal -# systemd-nspawn -bD /srv/mycontainer</programlisting> - - <para>This installs a minimal BLAG distribution into the - directory <filename noindex='true'>/srv/mycontainer/</filename> - and then boots an OS in a namespace container in it.</para> - </example> - - <example> - <title>Spawn a shell in a container of a minimal gNewSense unstable distribution</title> - - <programlisting># debootstrap --arch=amd64 unstable ~/gnewsense-tree/ -# systemd-nspawn -D ~/gnewsense-tree/</programlisting> - - <para>This installs a minimal gNewSense unstable distribution into - the directory <filename>~/gnewsense-tree/</filename> and then - spawns a shell in a namespace container in it.</para> - </example> - - <example> - <title>Boot a minimal Parabola GNU/Linux-libre distribution in a container</title> - - <programlisting># pacstrap -c -d ~/parabola-tree/ base -# systemd-nspawn -bD ~/parabola-tree/</programlisting> - - <para>This installs a minimal Parabola GNU/Linux-libre distribution into the - directory <filename>~/parabola-tree/</filename> and then boots an OS - in a namespace container in it.</para> - </example> - - <example> - <title>Boot into an ephemeral <literal>btrfs</literal> snapshot of the host system</title> - - <programlisting># systemd-nspawn -D / -xb</programlisting> - - <para>This runs a copy of the host system in a - <literal>btrfs</literal> snapshot which is removed immediately - when the container exits. All file system changes made during - runtime will be lost on shutdown, hence.</para> - </example> - - <example> - <title>Run a container with SELinux sandbox security contexts</title> - - <programlisting># chcon system_u:object_r:svirt_sandbox_file_t:s0:c0,c1 -R /srv/container -# systemd-nspawn -L system_u:object_r:svirt_sandbox_file_t:s0:c0,c1 -Z system_u:system_r:svirt_lxc_net_t:s0:c0,c1 -D /srv/container /bin/sh</programlisting> - </example> - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>The exit code of the program executed in the container is - returned.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.nspawn</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>chroot</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='mankier'><refentrytitle>dnf</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>debootstrap</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='archlinux'><refentrytitle>pacman</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machinectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>btrfs</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-path.xml b/man/systemd-path.xml deleted file mode 100644 index e2b23eec51..0000000000 --- a/man/systemd-path.xml +++ /dev/null @@ -1,107 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-path" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-path</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-path</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-path</refname> - <refpurpose>List and query system and user paths</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-path <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="opt" rep="repeat">NAME</arg></command> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-path</command> may be used to query system - and user paths. The tool makes many of the paths described in - <citerefentry><refentrytitle>file-hierarchy</refentrytitle><manvolnum>7</manvolnum></citerefentry> - available for querying.</para> - - <para>When invoked without arguments, a list of known paths and - their current values is shown. When at least one argument is - passed, the path with this name is queried and its value shown. - The variables whose name begins with <literal>search-</literal> - do not refer to individual paths, but instead to a list of - colon-separated search paths, in their order of precedence.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--suffix=</option></term> - - <listitem><para>The printed paths are suffixed by the - specified string.</para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>file-hierarchy</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-quotacheck.service.xml b/man/systemd-quotacheck.service.xml deleted file mode 100644 index 9d4976274e..0000000000 --- a/man/systemd-quotacheck.service.xml +++ /dev/null @@ -1,94 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-quotacheck.service" conditional='ENABLE_QUOTACHECK'> - - <refentryinfo> - <title>systemd-quotacheck.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-quotacheck.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-quotacheck.service</refname> - <refname>systemd-quotacheck</refname> - <refpurpose>File system quota checker logic</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-quotacheck.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-quotacheck</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-quotacheck.service</filename> is a service - responsible for file system quota checks. It is run once at boot - after all necessary file systems are mounted. It is pulled in only - if at least one file system has quotas enabled.</para> - </refsect1> - - <refsect1> - <title>Kernel Command Line</title> - - <para><filename>systemd-quotacheck</filename> understands one - kernel command line parameter:</para> - - <variablelist class='kernel-commandline-options'> - <varlistentry> - <term><varname>quotacheck.mode=</varname></term> - - <listitem><para>One of <literal>auto</literal>, - <literal>force</literal>, <literal>skip</literal>. Controls - the mode of operation. The default is <literal>auto</literal>, - and ensures that file system quota checks are done when the - file system quota checker deems them necessary. - <literal>force</literal> unconditionally results in full file - system quota checks. <literal>skip</literal> skips any file - system quota checks.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>quotacheck</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-fsck@.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-random-seed.service.xml b/man/systemd-random-seed.service.xml deleted file mode 100644 index f3b5a947da..0000000000 --- a/man/systemd-random-seed.service.xml +++ /dev/null @@ -1,75 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-random-seed.service" conditional='ENABLE_RANDOMSEED'> - - <refentryinfo> - <title>systemd-random-seed.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-random-seed.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-random-seed.service</refname> - <refname>systemd-random-seed</refname> - <refpurpose>Load and save the system random seed at boot and shutdown</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-random-seed.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-random-seed</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-random-seed.service</filename> is a - service that restores the random seed of the system at early boot - and saves it at shutdown. See - <citerefentry><refentrytitle>random</refentrytitle><manvolnum>4</manvolnum></citerefentry> - for details. Saving/restoring the random seed across boots - increases the amount of available entropy early at boot. On disk - the random seed is stored in - <filename>/var/lib/systemd/random-seed</filename>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>random</refentrytitle><manvolnum>4</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-remount-fs.service.xml b/man/systemd-remount-fs.service.xml deleted file mode 100644 index 176f2b2d20..0000000000 --- a/man/systemd-remount-fs.service.xml +++ /dev/null @@ -1,88 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-remount-fs.service"> - - <refentryinfo> - <title>systemd-remount-fs.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-remount-fs.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-remount-fs.service</refname> - <refname>systemd-remount-fs</refname> - <refpurpose>Remount root and kernel file systems</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-remount-fs.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-remount-fs</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-remount-fs.service</filename> is an - early boot service that applies mount options listed in - <citerefentry project='man-pages'><refentrytitle>fstab</refentrytitle><manvolnum>5</manvolnum></citerefentry> - to the root file system, the <filename>/usr</filename> file system, - and the kernel API file systems. This is required so that the - mount options of these file systems — which are pre-mounted by - the kernel, the initial RAM disk, container environments or system - manager code — are updated to those listed in - <filename>/etc/fstab</filename>. This service ignores normal file - systems and only changes the root file system (i.e. - <filename>/</filename>), <filename>/usr</filename> and the virtual - kernel API file systems such as <filename>/proc</filename>, - <filename>/sys</filename> or <filename>/dev</filename>. This - service executes no operation if <filename>/etc/fstab</filename> - does not exist or lists no entries for the mentioned file - systems.</para> - - <para>For a longer discussion of kernel API file systems see - <ulink url="http://www.freedesktop.org/wiki/Software/systemd/APIFileSystems">API - File Systems</ulink>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>fstab</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>mount</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-resolve.xml b/man/systemd-resolve.xml deleted file mode 100644 index 4b66f836a2..0000000000 --- a/man/systemd-resolve.xml +++ /dev/null @@ -1,375 +0,0 @@ -<?xml version='1.0'?> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2016 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-resolve" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-resolve</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-resolve</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-resolve</refname> - <refpurpose>Resolve domain names, IPV4 and IPv6 addresses, DNS resource records, and services</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-resolve</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="plain" rep="repeat"><replaceable>HOSTNAME</replaceable></arg> - </cmdsynopsis> - - <cmdsynopsis> - <command>systemd-resolve</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="plain" rep="repeat"><replaceable>ADDRESS</replaceable></arg> - </cmdsynopsis> - - <cmdsynopsis> - <command>systemd-resolve</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <command> --type=<replaceable>TYPE</replaceable></command> - <arg choice="plain" rep="repeat"><replaceable>DOMAIN</replaceable></arg> - </cmdsynopsis> - - <cmdsynopsis> - <command>systemd-resolve</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <command> --service</command> - <arg choice="plain"><arg choice="opt"><arg choice="opt"><replaceable>NAME</replaceable></arg> - <replaceable>TYPE</replaceable></arg> <replaceable>DOMAIN</replaceable></arg> - </cmdsynopsis> - - <cmdsynopsis> - <command>systemd-resolve</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <command> --openpgp</command> - <arg choice="plain"><replaceable>USER@DOMAIN</replaceable></arg> - </cmdsynopsis> - - <cmdsynopsis> - <command>systemd-resolve</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <command> --tlsa</command> - <arg choice="plain"><replaceable>DOMAIN<optional>:PORT</optional></replaceable></arg> - </cmdsynopsis> - - <cmdsynopsis> - <command>systemd-resolve</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <command> --statistics</command> - </cmdsynopsis> - - <cmdsynopsis> - <command>systemd-resolve</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <command> --reset-statistics</command> - </cmdsynopsis> - - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-resolve</command> may be used to resolve domain names, IPv4 and IPv6 addresses, DNS resource - records and services with the - <citerefentry><refentrytitle>systemd-resolved.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - resolver service. By default, the specified list of parameters will be resolved as hostnames, retrieving their IPv4 - and IPv6 addresses. If the parameters specified are formatted as IPv4 or IPv6 operation the reverse operation is - done, and a hostname is retrieved for the specified addresses.</para> - - <para>The <option>--type=</option> switch may be used to specify a DNS resource record type (A, AAAA, SOA, MX, ...) in - order to request a specific DNS resource record, instead of the address or reverse address lookups. - The special value <literal>help</literal> may be used to list known values.</para> - - <para>The <option>--service</option> switch may be used to resolve <ulink - url="https://tools.ietf.org/html/rfc2782">SRV</ulink> and <ulink - url="https://tools.ietf.org/html/rfc6763">DNS-SD</ulink> services (see below). In this mode, between one and three - arguments are required. If three parameters are passed the first is assumed to be the DNS-SD service name, the - second the SRV service type, and the third the domain to search in. In this case a full DNS-SD style SRV and TXT - lookup is executed. If only two parameters are specified, the first is assumed to be the SRV service type, and the - second the domain to look in. In this case no TXT RR is requested. Finally, if only one parameter is specified, it - is assumed to be a domain name, that is already prefixed with an SRV type, and an SRV lookup is done (no - TXT).</para> - - <para>The <option>--openpgp</option> switch may be used to query PGP keys stored as - <ulink url="https://tools.ietf.org/html/draft-wouters-dane-openpgp-02">OPENPGPKEY</ulink> resource records. - When this option is specified one or more e-mail address must be specified.</para> - - <para>The <option>--tlsa</option> switch maybe be used to query TLS public - keys stored as - <ulink url="https://tools.ietf.org/html/rfc6698">TLSA</ulink> resource records. - When this option is specified one or more domain names must be specified.</para> - - <para>The <option>--statistics</option> switch may be used to show resolver statistics, including information about - the number of successful and failed DNSSEC validations.</para> - - <para>The <option>--reset-statistics</option> may be used to reset various statistics counters maintained the - resolver, including those shown in the <option>--statistics</option> output. This operation requires root - privileges.</para> - </refsect1> - - <refsect1> - <title>Options</title> - <variablelist> - <varlistentry> - <term><option>-4</option></term> - <term><option>-6</option></term> - - <listitem><para>By default, when resolving a hostname, both IPv4 and IPv6 - addresses are acquired. By specifying <option>-4</option> only IPv4 addresses are requested, by specifying - <option>-6</option> only IPv6 addresses are requested.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-i</option> <replaceable>INTERFACE</replaceable></term> - <term><option>--interface=</option><replaceable>INTERFACE</replaceable></term> - - <listitem><para>Specifies the network interface to execute the query on. This may either be specified as numeric - interface index or as network interface string (e.g. <literal>en0</literal>). Note that this option has no - effect if system-wide DNS configuration (as configured in <filename>/etc/resolv.conf</filename> or - <filename>/etc/systemd/resolve.conf</filename>) in place of per-link configuration is used.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-p</option> <replaceable>PROTOCOL</replaceable></term> - <term><option>--protocol=</option><replaceable>PROTOCOL</replaceable></term> - - <listitem><para>Specifies the network protocol for the query. May be one of <literal>dns</literal> - (i.e. classic unicast DNS), <literal>llmnr</literal> (<ulink - url="https://tools.ietf.org/html/rfc4795">Link-Local Multicast Name Resolution</ulink>), - <literal>llmnr-ipv4</literal>, <literal>llmnr-ipv6</literal> (LLMNR via the indicated underlying IP - protocols). By default the lookup is done via all protocols suitable for the lookup. If used, limits the set of - protocols that may be used. Use this option multiple times to enable resolving via multiple protocols at the - same time. The setting <literal>llmnr</literal> is identical to specifying this switch once with - <literal>llmnr-ipv4</literal> and once via <literal>llmnr-ipv6</literal>. Note that this option does not force - the service to resolve the operation with the specified protocol, as that might require a suitable network - interface and configuration. - The special value <literal>help</literal> may be used to list known values. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-t</option> <replaceable>TYPE</replaceable></term> - <term><option>--type=</option><replaceable>TYPE</replaceable></term> - <term><option>-c</option> <replaceable>CLASS</replaceable></term> - <term><option>--class=</option><replaceable>CLASS</replaceable></term> - - <listitem><para>Specifies the DNS resource record type (e.g. A, AAAA, MX, …) and class (e.g. IN, ANY, …) to - look up. If these options are used a DNS resource record set matching the specified class and type is - requested. The class defaults to IN if only a type is specified. - The special value <literal>help</literal> may be used to list known values. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--service</option></term> - - <listitem><para>Enables service resolution. This enables DNS-SD and simple SRV service resolution, depending - on the specified list of parameters (see above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--service-address=</option><replaceable>BOOL</replaceable></term> - - <listitem><para>Takes a boolean parameter. If true (the default), when doing a service lookup with - <option>--service</option> the hostnames contained in the SRV resource records are resolved as well.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--service-txt=</option><replaceable>BOOL</replaceable></term> - - <listitem><para>Takes a boolean parameter. If true (the default), when doing a DNS-SD service lookup with - <option>--service</option> the TXT service metadata record is resolved as well.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--openpgp</option></term> - - <listitem><para>Enables OPENPGPKEY resource record resolution (see above). Specified e-mail - addresses are converted to the corresponding DNS domain name, and any OPENPGPKEY keys are - printed.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--tlsa</option></term> - - <listitem><para>Enables TLSA resource record resolution (see above). - A query will be performed for each of the specified names prefixed with - the port and family - (<literal>_<replaceable>port</replaceable>._<replaceable>family</replaceable>.<replaceable>domain</replaceable></literal>). - The port number may be specified after a colon - (<literal>:</literal>), otherwise <constant>443</constant> will be used - by default. The family may be specified as an argument after - <option>--tlsa</option>, otherwise <constant>tcp</constant> will be - used.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--cname=</option><replaceable>BOOL</replaceable></term> - - <listitem><para>Takes a boolean parameter. If true (the default), DNS CNAME or DNAME redirections are - followed. Otherwise, if a CNAME or DNAME record is encountered while resolving, an error is - returned.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--search=</option><replaceable>BOOL</replaceable></term> - - <listitem><para>Takes a boolean parameter. If true (the default), any specified single-label hostnames will be - searched in the domains configured in the search domain list, if it is non-empty. Otherwise, the search domain - logic is disabled.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--raw</option><optional>=payload|packet</optional></term> - - <listitem><para>Dump the answer as binary data. If there is no argument or if the argument is - <literal>payload</literal>, the payload of the packet is exported. If the argument is - <literal>packet</literal>, the whole packet is dumped in wire format, prefixed by - length specified as a little-endian 64-bit number. This format allows multiple packets - to be dumped and unambigously parsed.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--legend=</option><replaceable>BOOL</replaceable></term> - - <listitem><para>Takes a boolean parameter. If true (the default), column headers and meta information about the - query response are shown. Otherwise, this output is suppressed.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--statistics</option></term> - - <listitem><para>If specified general resolver statistics are shown, including information whether DNSSEC is - enabled and available, as well as resolution and validation statistics.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--reset-statistics</option></term> - - <listitem><para>Resets the statistics counters shown in <option>--statistics</option> to zero.</para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - </refsect1> - - <refsect1> - <title>Examples</title> - - <example> - <title>Retrieve the addresses of the <literal>www.0pointer.net</literal> domain</title> - - <programlisting>$ systemd-resolve www.0pointer.net -www.0pointer.net: 2a01:238:43ed:c300:10c3:bcf3:3266:da74 - 85.214.157.71 - --- Information acquired via protocol DNS in 611.6ms. --- Data is authenticated: no -</programlisting> - </example> - - <example> - <title>Retrieve the domain of the <literal>85.214.157.71</literal> IP address</title> - - <programlisting>$ systemd-resolve 85.214.157.71 -85.214.157.71: gardel.0pointer.net - --- Information acquired via protocol DNS in 1.2997s. --- Data is authenticated: no -</programlisting> - </example> - - <example> - <title>Retrieve the MX record of the <literal>0pointer.net</literal> domain</title> - - <programlisting>$ systemd-resolve -t MX yahoo.com --legend=no -yahoo.com. IN MX 1 mta7.am0.yahoodns.net -yahoo.com. IN MX 1 mta6.am0.yahoodns.net -yahoo.com. IN MX 1 mta5.am0.yahoodns.net -</programlisting> - </example> - - <example> - <title>Resolve an SRV service</title> - - <programlisting>$ systemd-resolve --service _xmpp-server._tcp gmail.com -_xmpp-server._tcp/gmail.com: alt1.xmpp-server.l.google.com:5269 [priority=20, weight=0] - 173.194.210.125 - alt4.xmpp-server.l.google.com:5269 [priority=20, weight=0] - 173.194.65.125 - ... -</programlisting> - </example> - - <example> - <title>Retrieve a PGP key</title> - - <programlisting>$ systemd-resolve --openpgp zbyszek@fedoraproject.org -d08ee310438ca124a6149ea5cc21b6313b390dce485576eff96f8722._openpgpkey.fedoraproject.org. IN OPENPGPKEY - mQINBFBHPMsBEACeInGYJCb+7TurKfb6wGyTottCDtiSJB310i37/6ZYoeIay/5soJjlMyf - MFQ9T2XNT/0LM6gTa0MpC1st9LnzYTMsT6tzRly1D1UbVI6xw0g0vE5y2Cjk3xUwAynCsSs - ... -</programlisting> - </example> - - <example> - <title>Retrieve a TLS key (<literal>=tcp</literal> and - <literal>:443</literal> could be skipped)</title> - - <programlisting>$ systemd-resolve --tlsa=tcp fedoraproject.org:443 -_443._tcp.fedoraproject.org IN TLSA 0 0 1 19400be5b7a31fb733917700789d2f0a2471c0c9d506c0e504c06c16d7cb17c0 - -- Cert. usage: CA constraint - -- Selector: Full Certificate - -- Matching type: SHA-256 -</programlisting> - </example> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-resolved.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> -</refentry> diff --git a/man/systemd-resolved.service.xml b/man/systemd-resolved.service.xml deleted file mode 100644 index 829729ca09..0000000000 --- a/man/systemd-resolved.service.xml +++ /dev/null @@ -1,163 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Tom Gundersen - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-resolved.service" conditional='ENABLE_RESOLVED'> - - <refentryinfo> - <title>systemd-resolved.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Tom</firstname> - <surname>Gundersen</surname> - <email>teg@jklm.no</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-resolved.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-resolved.service</refname> - <refname>systemd-resolved</refname> - <refpurpose>Network Name Resolution manager</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-resolved.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-resolved</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-resolved</command> is a system service that provides network name resolution to local - applications. It implements a caching and validating DNS/DNSSEC stub resolver, as well as an LLMNR resolver and - responder. In addition it maintains the <filename>/run/systemd/resolve/resolv.conf</filename> file for - compatibility with traditional Linux programs. This file may be symlinked from - <filename>/etc/resolv.conf</filename>.</para> - - <para>The glibc NSS module - <citerefentry><refentrytitle>nss-resolve</refentrytitle><manvolnum>8</manvolnum></citerefentry> is required to - permit glibc's NSS resolver functions to resolve host names via <command>systemd-resolved</command>.</para> - - <para>The DNS servers contacted are determined from the global - settings in <filename>/etc/systemd/resolved.conf</filename>, the - per-link static settings in <filename>/etc/systemd/network/*.network</filename> files, - and the per-link dynamic settings received over DHCP. See - <citerefentry><refentrytitle>resolved.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. To improve compatibility, - <filename>/etc/resolv.conf</filename> is read in order to discover - configured system DNS servers, but only if it is not a symlink - to <filename>/run/systemd/resolve/resolv.conf</filename> (see above).</para> - - <para><command>systemd-resolved</command> synthesizes DNS RRs for the following cases:</para> - - <itemizedlist> - <listitem><para>The local, configured hostname is resolved to - all locally configured IP addresses ordered by their scope, or - — if none are configured — the IPv4 address 127.0.0.2 (which - is on the local loopback) and the IPv6 address ::1 (which is the - local host).</para></listitem> - - <listitem><para>The hostnames <literal>localhost</literal> and - <literal>localhost.localdomain</literal> (as well as any hostname - ending in <literal>.localhost</literal> or <literal>.localhost.localdomain</literal>) - are resolved to the IP addresses 127.0.0.1 and ::1.</para></listitem> - - <listitem><para>The hostname <literal>gateway</literal> is - resolved to all current default routing gateway addresses, - ordered by their metric. This assigns a stable hostname to the - current gateway, useful for referencing it independently of the - current network configuration state.</para></listitem> - - <listitem><para>The mappings defined in <filename>/etc/hosts</filename> are resolved to their configured - addresses and back.</para></listitem> - </itemizedlist> - - <para>Lookup requests are routed to the available DNS servers - and LLMNR interfaces according to the following rules:</para> - - <itemizedlist> - <listitem><para>Lookups for the special hostname - <literal>localhost</literal> are never routed to the - network. (A few other, special domains are handled the same way.)</para></listitem> - - <listitem><para>Single-label names are routed to all local - interfaces capable of IP multicasting, using the LLMNR - protocol. Lookups for IPv4 addresses are only sent via LLMNR on - IPv4, and lookups for IPv6 addresses are only sent via LLMNR on - IPv6. Lookups for the locally configured host name and the - <literal>gateway</literal> host name are never routed to - LLMNR.</para></listitem> - - <listitem><para>Multi-label names are routed to all local - interfaces that have a DNS sever configured, plus the globally - configured DNS server if there is one. Address lookups from the - link-local address range are never routed to - DNS.</para></listitem> - </itemizedlist> - - <para>If lookups are routed to multiple interfaces, the first - successful response is returned (thus effectively merging the - lookup zones on all matching interfaces). If the lookup failed on - all interfaces, the last failing response is returned.</para> - - <para>Routing of lookups may be influenced by configuring - per-interface domain names. See - <citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. Lookups for a hostname ending in one of the - per-interface domains are exclusively routed to the matching - interfaces.</para> - - <para>Note that <filename>/run/systemd/resolve/resolv.conf</filename> should not be used directly by applications, - but only through a symlink from <filename>/etc/resolv.conf</filename>.</para> - - <para>See the <ulink url="http://www.freedesktop.org/wiki/Software/systemd/resolved"> resolved D-Bus API - Documentation</ulink> for information about the APIs <filename>systemd-resolved</filename> provides.</para> - - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>resolved.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>dnssec-trust-anchors.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>nss-resolve</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-resolve</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>resolv.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>hosts</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-rfkill.service.xml b/man/systemd-rfkill.service.xml deleted file mode 100644 index f464842700..0000000000 --- a/man/systemd-rfkill.service.xml +++ /dev/null @@ -1,90 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2013 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-rfkill.service" conditional='ENABLE_RFKILL'> - - <refentryinfo> - <title>systemd-rfkill.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-rfkill.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-rfkill.service</refname> - <refname>systemd-rfkill.socket</refname> - <refname>systemd-rfkill</refname> - <refpurpose>Load and save the RF kill switch state at boot and change</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-rfkill.service</filename></para> - <para><filename>systemd-rfkill.socket</filename></para> - <para><filename>/usr/lib/systemd/systemd-rfkill</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-rfkill.service</filename> is a service - that restores the RF kill switch state at early boot and saves it - on each change. On disk, the RF kill switch state is stored in - <filename>/var/lib/systemd/rfkill/</filename>.</para> - </refsect1> - - <refsect1> - <title>Kernel Command Line</title> - - <para><filename>systemd-rfkill</filename> understands the - following kernel command line parameter:</para> - - <variablelist class='kernel-commandline-options'> - <varlistentry> - <term><varname>systemd.restore_state=</varname></term> - - <listitem><para>Takes a boolean argument. Defaults to - <literal>1</literal>. If <literal>0</literal>, does not - restore the rfkill settings on boot. However, settings will - still be stored on shutdown. </para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-run.xml b/man/systemd-run.xml deleted file mode 100644 index 9c1a29218e..0000000000 --- a/man/systemd-run.xml +++ /dev/null @@ -1,459 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2013 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-run" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-run</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-run</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-run</refname> - <refpurpose>Run programs in transient scope or service or timer units</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-run</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="plain"><replaceable>COMMAND</replaceable> - <arg choice="opt" rep="repeat">ARGS</arg> - </arg> - </cmdsynopsis> - <cmdsynopsis> - <command>systemd-run</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="opt" rep="repeat">TIMER OPTIONS</arg> - <arg choice="req"><replaceable>COMMAND</replaceable></arg> - <arg choice="opt" rep="repeat">ARGS</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-run</command> may be used to create and - start a transient <filename>.service</filename> or - <filename>.scope</filename> unit and run the specified - <replaceable>COMMAND</replaceable> in it. It may also be used to - create and start transient <filename>.timer</filename> - units.</para> - - <para>If a command is run as transient service unit, it will be - started and managed by the service manager like any other service, - and thus shows up in the output of <command>systemctl - list-units</command> like any other unit. It will run in a clean - and detached execution environment, with the service manager as - its parent process. In this mode, <command>systemd-run</command> - will start the service asynchronously in the background and return - after the command has begun execution.</para> - - <para>If a command is run as transient scope unit, it will be - started by <command>systemd-run</command> itself as parent process - and will thus inherit the execution environment of the - caller. However, the processes of the command are managed by the - service manager similar to normal services, and will show up in - the output of <command>systemctl list-units</command>. Execution - in this case is synchronous, and will return only when the command - finishes. This mode is enabled via the <option>--scope</option> - switch (see below). </para> - - <para>If a command is run with timer options such as - <option>--on-calendar=</option> (see below), a transient timer - unit is created alongside the service unit for the specified - command. Only the transient timer unit is started immediately, the - transient service unit will be started when the transient timer - elapses. If the <option>--unit=</option> is specified, the - <replaceable>COMMAND</replaceable> may be omitted. In this case, - <command>systemd-run</command> only creates a - <filename>.timer</filename> unit that invokes the specified unit - when elapsing.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--no-ask-password</option></term> - - <listitem><para>Do not query the user for authentication for - privileged operations.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--scope</option></term> - - <listitem> - <para>Create a transient <filename>.scope</filename> unit instead of - the default transient <filename>.service</filename> unit. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--unit=</option></term> - - <listitem><para>Use this unit name instead of an automatically - generated one.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--property=</option></term> - <term><option>-p</option></term> - - <listitem><para>Sets a unit property for the scope or service - unit that is created. This takes an assignment in the same - format as - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s - <command>set-property</command> command.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--description=</option></term> - - <listitem><para>Provide a description for the service or scope - unit. If not specified, the command itself will be used as a - description. See <varname>Description=</varname> in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--slice=</option></term> - - <listitem><para>Make the new <filename>.service</filename> or - <filename>.scope</filename> unit part of the specified slice, - instead of the <filename>system.slice</filename>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--remain-after-exit</option></term> - - <listitem><para>After the service or scope process has - terminated, keep the service around until it is explicitly - stopped. This is useful to collect runtime information about - the service after it finished running. Also see - <varname>RemainAfterExit=</varname> in - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--send-sighup</option></term> - - <listitem><para>When terminating the scope or service unit, - send a SIGHUP immediately after SIGTERM. This is useful to - indicate to shells and shell-like processes that the - connection has been severed. Also see - <varname>SendSIGHUP=</varname> in - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--service-type=</option></term> - - <listitem><para>Sets the service type. Also see - <varname>Type=</varname> in - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>. This - option has no effect in conjunction with - <option>--scope</option>. Defaults to - <constant>simple</constant>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--uid=</option></term> - <term><option>--gid=</option></term> - - <listitem><para>Runs the service process under the UNIX user - and group. Also see <varname>User=</varname> and - <varname>Group=</varname> in - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--nice=</option></term> - - <listitem><para>Runs the service process with the specified - nice level. Also see <varname>Nice=</varname> in - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-E <replaceable>NAME</replaceable>=<replaceable>VALUE</replaceable></option></term> - <term><option>--setenv=<replaceable>NAME</replaceable>=<replaceable>VALUE</replaceable></option></term> - - <listitem><para>Runs the service process with the specified environment variable set. - Also see <varname>Environment=</varname> in - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--pty</option></term> - <term><option>-t</option></term> - - <listitem><para>When invoking a command, the service connects - its standard input and output to the invoking tty via a - pseudo TTY device. This allows invoking binaries as services - that expect interactive user input, such as interactive - command shells.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--quiet</option></term> - <term><option>-q</option></term> - - <listitem><para>Suppresses additional informational output - while running. This is particularly useful in combination with - <option>--pty</option> when it will suppress the initial - message explaining how to terminate the TTY connection.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--on-active=</option></term> - <term><option>--on-boot=</option></term> - <term><option>--on-startup=</option></term> - <term><option>--on-unit-active=</option></term> - <term><option>--on-unit-inactive=</option></term> - - <listitem><para>Defines monotonic timers relative to different - starting points. Also see <varname>OnActiveSec=</varname>, - <varname>OnBootSec=</varname>, - <varname>OnStartupSec=</varname>, - <varname>OnUnitActiveSec=</varname> and - <varname>OnUnitInactiveSec=</varname> in - <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>. This - options have no effect in conjunction with - <option>--scope</option>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--on-calendar=</option></term> - - <listitem><para>Defines realtime (i.e. wallclock) timers with - calendar event expressions. Also see - <varname>OnCalendar=</varname> in - <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>. This - option has no effect in conjunction with - <option>--scope</option>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--timer-property=</option></term> - - <listitem><para>Sets a timer unit property for the timer unit - that is created. It is similar with - <option>--property</option> but only for created timer - unit. This option only has effect in conjunction with - <option>--on-active=</option>, <option>--on-boot=</option>, - <option>--on-startup=</option>, - <option>--on-unit-active=</option>, - <option>--on-unit-inactive=</option>, - <option>--on-calendar=</option>. This takes an assignment in - the same format as - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s - <command>set-property</command> command.</para> </listitem> - </varlistentry> - - <varlistentry> - <term><option>--no-block</option></term> - - <listitem> - <para>Do not synchronously wait for the requested operation - to finish. If this is not specified, the job will be - verified, enqueued and <command>systemd-run</command> will - wait until the unit's start-up is completed. By passing this - argument, it is only verified and enqueued.</para> - </listitem> - </varlistentry> - - <xi:include href="user-system-options.xml" xpointer="user" /> - <xi:include href="user-system-options.xml" xpointer="system" /> - <xi:include href="user-system-options.xml" xpointer="host" /> - <xi:include href="user-system-options.xml" xpointer="machine" /> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - - <para>All command line arguments after the first non-option - argument become part of the command line of the launched - process. If a command is run as service unit, its first argument - needs to be an absolute binary path.</para> - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure - code otherwise.</para> - </refsect1> - - <refsect1> - <title>Examples</title> - - <example> - <title>Logging environment variables provided by systemd to services</title> - - <programlisting># systemd-run env -Running as unit: run-19945.service -# journalctl -u run-19945.service -Sep 08 07:37:21 bupkis systemd[1]: Starting /usr/bin/env... -Sep 08 07:37:21 bupkis systemd[1]: Started /usr/bin/env. -Sep 08 07:37:21 bupkis env[19948]: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin -Sep 08 07:37:21 bupkis env[19948]: LANG=en_US.UTF-8 -Sep 08 07:37:21 bupkis env[19948]: BOOT_IMAGE=/vmlinuz-3.11.0-0.rc5.git6.2.fc20.x86_64</programlisting> - </example> - - <example> - <title>Limiting resources available to a command</title> - - <programlisting># systemd-run -p BlockIOWeight=10 updatedb</programlisting> - - <para>This command invokes the - <citerefentry project='man-pages'><refentrytitle>updatedb</refentrytitle><manvolnum>8</manvolnum></citerefentry> - tool, but lowers the block I/O weight for it to 10. See - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information on the <varname>BlockIOWeight=</varname> - property.</para> - </example> - - <example> - <title>Running commands at a specified time</title> - - <para>The following command will touch a file after 30 seconds.</para> - - <programlisting># date; systemd-run --on-active=30 --timer-property=AccuracySec=100ms /bin/touch /tmp/foo -Mon Dec 8 20:44:24 KST 2014 -Running as unit: run-71.timer -Will run service as unit: run-71.service -# journalctl -b -u run-71.timer --- Logs begin at Fri 2014-12-05 19:09:21 KST, end at Mon 2014-12-08 20:44:54 KST. -- -Dec 08 20:44:38 container systemd[1]: Starting /bin/touch /tmp/foo. -Dec 08 20:44:38 container systemd[1]: Started /bin/touch /tmp/foo. -# journalctl -b -u run-71.service --- Logs begin at Fri 2014-12-05 19:09:21 KST, end at Mon 2014-12-08 20:44:54 KST. -- -Dec 08 20:44:48 container systemd[1]: Starting /bin/touch /tmp/foo... -Dec 08 20:44:48 container systemd[1]: Started /bin/touch /tmp/foo.</programlisting> - </example> - - <example> - <title>Allowing access to the tty</title> - - <para>The following command invokes <filename>/bin/bash</filename> as a service - passing its standard input, output and error to the calling TTY.</para> - - <programlisting># systemd-run -t --send-sighup /bin/bash</programlisting> - </example> - - <example> - <title>Start <command>screen</command> as a user service</title> - - <programlisting>$ systemd-run --scope --user screen -Running scope as unit run-r14b0047ab6df45bfb45e7786cc839e76.scope. - -$ screen -ls -There is a screen on: - 492..laptop (Detached) -1 Socket in /var/run/screen/S-fatima. -</programlisting> - - <para>This starts the <command>screen</command> process as a child of the - <command>systemd --user</command> process that was started by - <filename>user@.service</filename>, in a scope unit. A - <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry> - unit is used instead of a - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - unit, because <command>screen</command> will exit when detaching from the terminal, - and a service unit would be terminated. Running <command>screen</command> - as a user unit has the advantage that it is not part of the session scope. - If <varname>KillUserProcesses=yes</varname> is configured in - <citerefentry><refentrytitle>logind.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - the default, the session scope will be terminated when the user logs - out of that session.</para> - - <para>The <filename>user@.service</filename> is started automatically - when the user first logs in, and stays around as long as at least one - login session is open. After the user logs out of the last session, - <filename>user@.service</filename> and all services underneath it - are terminated. This behaviour is the default, when "lingering" is - not enabled for that user. Enabling lingering means that - <filename>user@.service</filename> is started automatically during - boot, even if the user is not logged in, and that the service is - not terminated when the user logs out.</para> - - <para>Enabling lingering allows the user to run processes without being logged in, - for example to allow <command>screen</command> to persist after the user logs out, - even if the session scope is terminated. In the default configuration, users can - enable lingering for themselves:</para> - - <programlisting>$ loginctl enable-linger</programlisting> - </example> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>machinectl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-sleep.conf.xml b/man/systemd-sleep.conf.xml deleted file mode 100644 index 9a379ecb94..0000000000 --- a/man/systemd-sleep.conf.xml +++ /dev/null @@ -1,186 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2013 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-sleep.conf" - xmlns:xi="http://www.w3.org/2001/XInclude"> - <refentryinfo> - <title>systemd-sleep.conf</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-sleep.conf</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-sleep.conf</refname> - <refname>sleep.conf.d</refname> - <refpurpose>Suspend and hibernation configuration file</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/systemd/sleep.conf</filename></para> - <para><filename>/etc/systemd/sleep.conf.d/*.conf</filename></para> - <para><filename>/run/systemd/sleep.conf.d/*.conf</filename></para> - <para><filename>/usr/lib/systemd/sleep.conf.d/*.conf</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd</command> supports three general - power-saving modes:</para> - - <variablelist> - <varlistentry> - <term>suspend</term> - - <listitem><para>a low-power state - where execution of the OS is paused, - and complete power loss might result - in lost data, and which is fast to - enter and exit. This corresponds to - suspend, standby, or freeze states as - understood by the kernel. - </para></listitem> - </varlistentry> - - <varlistentry> - <term>hibernate</term> - - <listitem><para>a low-power state - where execution of the OS is paused, - and complete power loss does not - result in lost data, and which might - be slow to enter and exit. This - corresponds to the hibernation as - understood by the kernel. - </para></listitem> - </varlistentry> - - <varlistentry> - <term>hybrid-sleep</term> - - <listitem><para>a low-power state - where execution of the OS is paused, - which might be slow to enter, and on - complete power loss does not result in - lost data but might be slower to exit - in that case. This mode is called - suspend-to-both by the kernel. - </para></listitem> - </varlistentry> - </variablelist> - - <para>Settings in these files determine what strings - will be written to - <filename>/sys/power/disk</filename> and - <filename>/sys/power/state</filename> by - <citerefentry><refentrytitle>systemd-sleep</refentrytitle><manvolnum>8</manvolnum></citerefentry> - when - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - attempts to suspend or hibernate the machine.</para> - </refsect1> - - <xi:include href="standard-conf.xml" xpointer="main-conf" /> - - <refsect1> - <title>Options</title> - - <para>The following options can be configured in the - <literal>[Sleep]</literal> section of - <filename>/etc/systemd/sleep.conf</filename> or a - <filename>sleep.conf.d</filename> file:</para> - - <variablelist class='systemd-directives'> - <varlistentry> - <term><varname>SuspendMode=</varname></term> - <term><varname>HibernateMode=</varname></term> - <term><varname>HybridSleepMode=</varname></term> - - <listitem><para>The string to be written to - <filename>/sys/power/disk</filename> by, - respectively, - <citerefentry><refentrytitle>systemd-suspend.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-hibernate.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, or - <citerefentry><refentrytitle>systemd-hybrid-sleep.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - More than one value can be specified by separating - multiple values with whitespace. They will be tried - in turn, until one is written without error. If - neither succeeds, the operation will be aborted. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SuspendState=</varname></term> - <term><varname>HibernateState=</varname></term> - <term><varname>HybridSleepState=</varname></term> - - <listitem><para>The string to be written to - <filename>/sys/power/state</filename> by, - respectively, - <citerefentry><refentrytitle>systemd-suspend.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-hibernate.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, or - <citerefentry><refentrytitle>systemd-hybrid-sleep.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - More than one value can be specified by separating - multiple values with whitespace. They will be tried - in turn, until one is written without error. If - neither succeeds, the operation will be aborted. - </para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Example: freeze</title> - - <para>Example: to exploit the <quote>freeze</quote> mode added - in Linux 3.9, one can use <command>systemctl suspend</command> - with - <programlisting>[Sleep] -SuspendState=freeze</programlisting></para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd-sleep</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-suspend.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-hibernate.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-hybrid-sleep.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-socket-activate.xml b/man/systemd-socket-activate.xml deleted file mode 100644 index 5d7f157c72..0000000000 --- a/man/systemd-socket-activate.xml +++ /dev/null @@ -1,206 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2013 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-socket-activate" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-socket-activate</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-socket-activate</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-socket-activate</refname> - <refpurpose>Test socket activation of daemons</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-socket-activate</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="plain"><replaceable>daemon</replaceable></arg> - <arg choice="opt" rep="repeat">OPTIONS</arg> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-socket-activate</command> may be used to launch a socket-activated service binary from the command - line for testing purposes. It may also be used to launch individual instances of the service binary per connection. - </para> - - <para>The daemon to launch and its options should be specified - after options intended for <command>systemd-socket-activate</command>. - </para> - - <para>If the <option>--inetd</option> option is given, the socket file descriptor will be used as the standard - input and output of the launched process. Otherwise, standard input and output will be inherited, and sockets will - be passed through file descriptors 3 and higher. Sockets passed through <varname>$LISTEN_FDS</varname> to - <command>systemd-socket-activate</command> will be passed through to the daemon, in the original positions. Other sockets - specified with <option>--listen=</option> will use consecutive descriptors. By default, - <command>systemd-socket-activate</command> listens on a stream socket, use <option>--datagram</option> and - <option>--seqpacket</option> to listen on datagram or sequential packet sockets instead (see below). - </para> - </refsect1> - - <refsect1> - <title>Options</title> - <variablelist> - <varlistentry> - <term><option>-l <replaceable>address</replaceable></option></term> - <term><option>--listen=<replaceable>address</replaceable></option></term> - - <listitem><para>Listen on this <replaceable>address</replaceable>. - Takes a string like <literal>2000</literal> or - <literal>127.0.0.1:2001</literal>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>-a</option></term> - <term><option>--accept</option></term> - - <listitem><para>Launch an instance of the service binary for each connection and pass the connection - socket.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-d</option></term> - <term><option>--datagram</option></term> - - <listitem><para>Listen on a datagram socket (<constant>SOCK_DGRAM</constant>), instead of a stream socket - (<constant>SOCK_STREAM</constant>). May not be combined with <option>--seqpacket</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--seqpacket</option></term> - - <listitem><para>Listen on a sequential packet socket (<constant>SOCK_SEQPACKET</constant>), instead of a stream - socket (<constant>SOCK_STREAM</constant>). May not be combined with - <option>--datagram</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--inetd</option></term> - - <listitem><para>Use the inetd protocol for passing file descriptors, i.e. as standard input and standard - output, instead of the new-style protocol for passing file descriptors using <varname>$LISTEN_FDS</varname> - (see above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>-E <replaceable>VAR</replaceable><optional>=<replaceable>VALUE</replaceable></optional></option></term> - <term><option>--setenv=<replaceable>VAR</replaceable><optional>=<replaceable>VALUE</replaceable></optional></option></term> - - <listitem><para>Add this variable to the environment of the - launched process. If <replaceable>VAR</replaceable> is - followed by <literal>=</literal>, assume that it is a - variable–value pair. Otherwise, obtain the value from the - environment of <command>systemd-socket-activate</command> itself. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--fdname=</option><replaceable>NAME</replaceable><optional>:<replaceable>NAME</replaceable>...</optional></term> - - <listitem><para>Specify names for the file descriptors passed. This is equivalent to setting - <varname>FileDescriptorName=</varname> in socket unit files, and enables use of - <citerefentry><refentrytitle>sd_listen_fds_with_names</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - Multiple entries may be specifies using separate options or by separating names with colons - (<literal>:</literal>) in one option. In case more names are given than descriptors, superflous ones willl be - ignored. In case less names are given than descriptors, the remaining file descriptors will be unnamed. - </para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - </refsect1> - - <refsect1> - <title>Environment variables</title> - <variablelist class='environment-variables'> - <varlistentry> - <term><varname>$LISTEN_FDS</varname></term> - <term><varname>$LISTEN_PID</varname></term> - <term><varname>$LISTEN_FDNAMES</varname></term> - - <listitem><para>See - <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$SYSTEMD_LOG_TARGET</varname></term> - <term><varname>$SYSTEMD_LOG_LEVEL</varname></term> - <term><varname>$SYSTEMD_LOG_COLOR</varname></term> - <term><varname>$SYSTEMD_LOG_LOCATION</varname></term> - - <listitem><para>Same as in - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Examples</title> - - <example> - <title>Run an echo server on port 2000</title> - - <programlisting>$ systemd-socket-activate -l 2000 --inetd -a cat</programlisting> - </example> - - <example> - <title>Run a socket-activated instance of <citerefentry><refentrytitle>systemd-journal-gatewayd</refentrytitle><manvolnum>8</manvolnum></citerefentry></title> - - <programlisting>$ systemd-socket-activate -l 19531 /usr/lib/systemd/systemd-journal-gatewayd</programlisting> - </example> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_listen_fds_with_names</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>cat</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> -</refentry> diff --git a/man/systemd-socket-proxyd.xml b/man/systemd-socket-proxyd.xml deleted file mode 100644 index ae4217b910..0000000000 --- a/man/systemd-socket-proxyd.xml +++ /dev/null @@ -1,190 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2013 David Strauss - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-socket-proxyd" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-socket-proxyd</title> - <productname>systemd</productname> - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>David</firstname> - <surname>Strauss</surname> - <email>david@davidstrauss.net</email> - </author> - </authorgroup> - </refentryinfo> - <refmeta> - <refentrytitle>systemd-socket-proxyd</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - <refnamediv> - <refname>systemd-socket-proxyd</refname> - <refpurpose>Bidirectionally proxy local sockets to another (possibly remote) socket.</refpurpose> - </refnamediv> - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-socket-proxyd</command> - <arg choice="opt" rep="repeat"><replaceable>OPTIONS</replaceable></arg> - <arg choice="plain"><replaceable>HOST</replaceable>:<replaceable>PORT</replaceable></arg> - </cmdsynopsis> - <cmdsynopsis> - <command>systemd-socket-proxyd</command> - <arg choice="opt" rep="repeat"><replaceable>OPTIONS</replaceable></arg> - <arg choice="plain"><replaceable>UNIX-DOMAIN-SOCKET-PATH</replaceable> - </arg> - </cmdsynopsis> - </refsynopsisdiv> - <refsect1> - <title>Description</title> - <para> - <command>systemd-socket-proxyd</command> is a generic - socket-activated network socket forwarder proxy daemon for IPv4, - IPv6 and UNIX stream sockets. It may be used to bi-directionally - forward traffic from a local listening socket to a local or remote - destination socket.</para> - - <para>One use of this tool is to provide socket activation support - for services that do not natively support socket activation. On - behalf of the service to activate, the proxy inherits the socket - from systemd, accepts each client connection, opens a connection - to a configured server for each client, and then bidirectionally - forwards data between the two.</para> - <para>This utility's behavior is similar to - <citerefentry project='die-net'><refentrytitle>socat</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - The main differences for <command>systemd-socket-proxyd</command> - are support for socket activation with - <literal>Accept=false</literal> and an event-driven - design that scales better with the number of - connections.</para> - </refsect1> - <refsect1> - <title>Options</title> - <para>The following options are understood:</para> - <variablelist> - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - </refsect1> - <refsect1> - <title>Exit status</title> - <para>On success, 0 is returned, a non-zero failure - code otherwise.</para> - </refsect1> - <refsect1> - <title>Examples</title> - <refsect2> - <title>Simple Example</title> - <para>Use two services with a dependency and no namespace - isolation.</para> - <example> - <title>proxy-to-nginx.socket</title> - <programlisting><![CDATA[[Socket] -ListenStream=80 - -[Install] -WantedBy=sockets.target]]></programlisting> - </example> - <example> - <title>proxy-to-nginx.service</title> - <programlisting><![CDATA[[Unit] -Requires=nginx.service -After=nginx.service - -[Service] -ExecStart=/usr/lib/systemd/systemd-socket-proxyd /tmp/nginx.sock -PrivateTmp=yes -PrivateNetwork=yes]]></programlisting> - </example> - <example> - <title>nginx.conf</title> - <programlisting> -<![CDATA[[...] -server { - listen unix:/tmp/nginx.sock; - [...]]]> -</programlisting> - </example> - <example> - <title>Enabling the proxy</title> - <programlisting><![CDATA[# systemctl enable proxy-to-nginx.socket -# systemctl start proxy-to-nginx.socket -$ curl http://localhost:80/]]></programlisting> - </example> - </refsect2> - <refsect2> - <title>Namespace Example</title> - <para>Similar as above, but runs the socket proxy and the main - service in the same private namespace, assuming that - <filename>nginx.service</filename> has - <varname>PrivateTmp=</varname> and - <varname>PrivateNetwork=</varname> set, too.</para> - <example> - <title>proxy-to-nginx.socket</title> - <programlisting><![CDATA[[Socket] -ListenStream=80 - -[Install] -WantedBy=sockets.target]]></programlisting> - </example> - <example> - <title>proxy-to-nginx.service</title> - <programlisting><![CDATA[[Unit] -Requires=nginx.service -After=nginx.service -JoinsNamespaceOf=nginx.service - -[Service] -ExecStart=/usr/lib/systemd/systemd-socket-proxyd 127.0.0.1:8080 -PrivateTmp=yes -PrivateNetwork=yes]]></programlisting> - </example> - <example> - <title>nginx.conf</title> - <programlisting><![CDATA[[...] -server { - listen 8080; - [...]]]></programlisting> - </example> - <example> - <title>Enabling the proxy</title> - <programlisting><![CDATA[# systemctl enable proxy-to-nginx.socket -# systemctl start proxy-to-nginx.socket -$ curl http://localhost:80/]]></programlisting> - </example> - </refsect2> - </refsect1> - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>socat</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>nginx</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>curl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> -</refentry> diff --git a/man/systemd-sysctl.service.xml b/man/systemd-sysctl.service.xml deleted file mode 100644 index 686b2cdef4..0000000000 --- a/man/systemd-sysctl.service.xml +++ /dev/null @@ -1,152 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-sysctl.service" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-sysctl.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-sysctl.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-sysctl.service</refname> - <refname>systemd-sysctl</refname> - <refpurpose>Configure kernel parameters at boot</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>/usr/lib/systemd/systemd-sysctl</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="opt" rep="repeat"><replaceable>CONFIGFILE</replaceable></arg> - </cmdsynopsis> - <para><filename>systemd-sysctl.service</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-sysctl.service</filename> is an early boot - service that configures - <citerefentry project='man-pages'><refentrytitle>sysctl</refentrytitle><manvolnum>8</manvolnum></citerefentry> - kernel parameters by invoking <command>/usr/lib/systemd/systemd-sysctl</command>.</para> - - <para>When invoked with no arguments, <command>/usr/lib/systemd/systemd-sysctl</command> applies - all directives from configuration files listed in - <citerefentry><refentrytitle>sysctl.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - If one or more filenames are passed on the command line, only the directives in these files are - applied.</para> - - <para>In addition, <option>--prefix=</option> option may be used to limit which sysctl - settings are applied.</para> - - <para>See - <citerefentry project='man-pages'><refentrytitle>sysctl.d</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for information about the configuration of sysctl settings. After sysctl configuration is - changed on disk, it must be written to the files in <filename>/proc/sys</filename> before it - takes effect. It is possible to update specific settings, or simply to reload all configuration, - see Examples below.</para> - </refsect1> - - <refsect1><title>Options</title> - <variablelist> - <varlistentry id='prefix'> - <term><option>--prefix=</option></term> - <listitem> - <para>Only apply rules with the specified prefix.</para> - </listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - - </variablelist> - </refsect1> - - <refsect1> - <title>Examples</title> - - <example> - <title>Reset all sysctl settings</title> - - <programlisting>systemctl restart systemd-sysctl</programlisting> - </example> - - <example> - <title>View coredump handler configuration</title> - - <programlisting># sysctl kernel.core_pattern -kernel.core_pattern = |/usr/libexec/abrt-hook-ccpp %s %c %p %u %g %t %P %I -</programlisting> - </example> - - <example> - <title>Update coredump handler configuration</title> - - <programlisting># /usr/lib/systemd/systemd-sysctl --prefix kernel.core_pattern</programlisting> - - <para>This searches all the directories listed in - <citerefentry><refentrytitle>sysctl.d</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for configuration files and writes <filename>/proc/sys/kernel/core_pattern</filename>.</para> - </example> - - <example> - <title>Update coredump handler configuration according to a specific file</title> - - <programlisting># /usr/lib/systemd/systemd-sysctl 50-coredump.conf</programlisting> - - <para>This applies all the settings found in <filename>50-coredump.conf</filename>. - Either <filename>/etc/sysctl.d/50-coredump.conf</filename>, or - <filename>/run/sysctl.d/50-coredump.conf</filename>, or - <filename>/usr/lib/sysctl.d/50-coredump.conf</filename> will be used, in the order - of preference.</para> - </example> - - <para>See - <citerefentry project='man-pages'><refentrytitle>sysctl</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for various ways to directly apply sysctl settings.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>sysctl.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>sysctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-system-update-generator.xml b/man/systemd-system-update-generator.xml deleted file mode 100644 index e7fc95c742..0000000000 --- a/man/systemd-system-update-generator.xml +++ /dev/null @@ -1,76 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-system-update-generator"> - - <refentryinfo> - <title>systemd-system-update-generator</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-system-update-generator</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-system-update-generator</refname> - <refpurpose>Generator for redirecting boot to offline update mode</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/usr/lib/systemd/system-generators/systemd-system-update-generator</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-system-update-generator</filename> is a - generator that automatically redirects the boot process to - <filename>system-update.target</filename> if - <filename>/system-update</filename> exists. This is required to - implement the logic explained in the <ulink - url="http://freedesktop.org/wiki/Software/systemd/SystemUpdates">System - Updates Specification</ulink>. - </para> - - <para><filename>systemd-system-update-generator</filename> implements - <citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-system.conf.xml b/man/systemd-system.conf.xml deleted file mode 100644 index 8833e73c72..0000000000 --- a/man/systemd-system.conf.xml +++ /dev/null @@ -1,394 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-system.conf" - xmlns:xi="http://www.w3.org/2001/XInclude"> - <refentryinfo> - <title>systemd-system.conf</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-system.conf</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-system.conf</refname> - <refname>system.conf.d</refname> - <refname>systemd-user.conf</refname> - <refname>user.conf.d</refname> - <refpurpose>System and session service manager configuration files</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/systemd/system.conf</filename>, - <filename>/etc/systemd/system.conf.d/*.conf</filename>, - <filename>/run/systemd/system.conf.d/*.conf</filename>, - <filename>/usr/lib/systemd/system.conf.d/*.conf</filename></para> - <para><filename>/etc/systemd/user.conf</filename>, - <filename>/etc/systemd/user.conf.d/*.conf</filename>, - <filename>/run/systemd/user.conf.d/*.conf</filename>, - <filename>/usr/lib/systemd/user.conf.d/*.conf</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>When run as a system instance, systemd interprets the - configuration file <filename>system.conf</filename> and the files - in <filename>system.conf.d</filename> directories; when run as a - user instance, systemd interprets the configuration file - <filename>user.conf</filename> and the files in - <filename>user.conf.d</filename> directories. These configuration - files contain a few settings controlling basic manager - operations.</para> - </refsect1> - - <xi:include href="standard-conf.xml" xpointer="main-conf" /> - - <refsect1> - <title>Options</title> - - <para>All options are configured in the - <literal>[Manager]</literal> section:</para> - - <variablelist class='systemd-directives'> - - <varlistentry> - <term><varname>LogLevel=</varname></term> - <term><varname>LogTarget=</varname></term> - <term><varname>LogColor=</varname></term> - <term><varname>LogLocation=</varname></term> - <term><varname>DumpCore=yes</varname></term> - <term><varname>CrashChangeVT=no</varname></term> - <term><varname>CrashShell=no</varname></term> - <term><varname>CrashReboot=no</varname></term> - <term><varname>ShowStatus=yes</varname></term> - <term><varname>DefaultStandardOutput=journal</varname></term> - <term><varname>DefaultStandardError=inherit</varname></term> - - <listitem><para>Configures various parameters of basic manager - operation. These options may be overridden by the respective - command line arguments. See - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - for details about these command line - arguments.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>CPUAffinity=</varname></term> - - <listitem><para>Configures the initial CPU affinity for the - init process. Takes a list of CPU indices or ranges separated - by either whitespace or commas. CPU ranges are specified by - the lower and upper CPU indices separated by a - dash.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>JoinControllers=cpu,cpuacct net_cls,netprio</varname></term> - - <listitem><para>Configures controllers that shall be mounted - in a single hierarchy. By default, systemd will mount all - controllers which are enabled in the kernel in individual - hierarchies, with the exception of those listed in this - setting. Takes a space-separated list of comma-separated - controller names, in order to allow multiple joined - hierarchies. Defaults to 'cpu,cpuacct'. Pass an empty string - to ensure that systemd mounts all controllers in separate - hierarchies.</para> - - <para>Note that this option is only applied once, at very - early boot. If you use an initial RAM disk (initrd) that uses - systemd, it might hence be necessary to rebuild the initrd if - this option is changed, and make sure the new configuration - file is included in it. Otherwise, the initrd might mount the - controller hierarchies in a different configuration than - intended, and the main system cannot remount them - anymore.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RuntimeWatchdogSec=</varname></term> - <term><varname>ShutdownWatchdogSec=</varname></term> - - <listitem><para>Configure the hardware watchdog at runtime and - at reboot. Takes a timeout value in seconds (or in other time - units if suffixed with <literal>ms</literal>, - <literal>min</literal>, <literal>h</literal>, - <literal>d</literal>, <literal>w</literal>). If - <varname>RuntimeWatchdogSec=</varname> is set to a non-zero - value, the watchdog hardware - (<filename>/dev/watchdog</filename>) will be programmed to - automatically reboot the system if it is not contacted within - the specified timeout interval. The system manager will ensure - to contact it at least once in half the specified timeout - interval. This feature requires a hardware watchdog device to - be present, as it is commonly the case in embedded and server - systems. Not all hardware watchdogs allow configuration of the - reboot timeout, in which case the closest available timeout is - picked. <varname>ShutdownWatchdogSec=</varname> may be used to - configure the hardware watchdog when the system is asked to - reboot. It works as a safety net to ensure that the reboot - takes place even if a clean reboot attempt times out. By - default <varname>RuntimeWatchdogSec=</varname> defaults to 0 - (off), and <varname>ShutdownWatchdogSec=</varname> to 10min. - These settings have no effect if a hardware watchdog is not - available.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>CapabilityBoundingSet=</varname></term> - - <listitem><para>Controls which capabilities to include in the - capability bounding set for PID 1 and its children. See - <citerefentry project='man-pages'><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details. Takes a whitespace-separated list of capability - names as read by - <citerefentry project='mankier'><refentrytitle>cap_from_name</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - Capabilities listed will be included in the bounding set, all - others are removed. If the list of capabilities is prefixed - with ~, all but the listed capabilities will be included, the - effect of the assignment inverted. Note that this option also - affects the respective capabilities in the effective, - permitted and inheritable capability sets. The capability - bounding set may also be individually configured for units - using the <varname>CapabilityBoundingSet=</varname> directive - for units, but note that capabilities dropped for PID 1 cannot - be regained in individual units, they are lost for - good.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SystemCallArchitectures=</varname></term> - - <listitem><para>Takes a space-separated list of architecture - identifiers. Selects from which architectures system calls may - be invoked on this system. This may be used as an effective - way to disable invocation of non-native binaries system-wide, - for example to prohibit execution of 32-bit x86 binaries on - 64-bit x86-64 systems. This option operates system-wide, and - acts similar to the - <varname>SystemCallArchitectures=</varname> setting of unit - files, see - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. This setting defaults to the empty list, in which - case no filtering of system calls based on architecture is - applied. Known architecture identifiers are - <literal>x86</literal>, <literal>x86-64</literal>, - <literal>x32</literal>, <literal>arm</literal> and the special - identifier <literal>native</literal>. The latter implicitly - maps to the native architecture of the system (or more - specifically, the architecture the system manager was compiled - for). Set this setting to <literal>native</literal> to - prohibit execution of any non-native binaries. When a binary - executes a system call of an architecture that is not listed - in this setting, it will be immediately terminated with the - SIGSYS signal.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>TimerSlackNSec=</varname></term> - - <listitem><para>Sets the timer slack in nanoseconds for PID 1, - which is inherited by all executed processes, unless - overridden individually, for example with the - <varname>TimerSlackNSec=</varname> setting in service units - (for details see - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>). - The timer slack controls the accuracy of wake-ups triggered by - system timers. See - <citerefentry><refentrytitle>prctl</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for more information. Note that in contrast to most other time - span definitions this parameter takes an integer value in - nano-seconds if no unit is specified. The usual time units are - understood too.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DefaultTimerAccuracySec=</varname></term> - - <listitem><para>Sets the default accuracy of timer units. This - controls the global default for the - <varname>AccuracySec=</varname> setting of timer units, see - <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. <varname>AccuracySec=</varname> set in individual - units override the global default for the specific unit. - Defaults to 1min. Note that the accuracy of timer units is - also affected by the configured timer slack for PID 1, see - <varname>TimerSlackNSec=</varname> above.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DefaultTimeoutStartSec=</varname></term> - <term><varname>DefaultTimeoutStopSec=</varname></term> - <term><varname>DefaultRestartSec=</varname></term> - - <listitem><para>Configures the default timeouts for starting - and stopping of units, as well as the default time to sleep - between automatic restarts of units, as configured per-unit in - <varname>TimeoutStartSec=</varname>, - <varname>TimeoutStopSec=</varname> and - <varname>RestartSec=</varname> (for services, see - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details on the per-unit settings). For non-service units, - <varname>DefaultTimeoutStartSec=</varname> sets the default - <varname>TimeoutSec=</varname> - value. <varname>DefaultTimeoutStartSec=</varname> and - <varname>DefaultTimeoutStopSec=</varname> default to - 90s. <varname>DefaultRestartSec=</varname> defaults to - 100ms.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DefaultStartLimitIntervalSec=</varname></term> - <term><varname>DefaultStartLimitBurst=</varname></term> - - <listitem><para>Configure the default unit start rate - limiting, as configured per-service by - <varname>StartLimitIntervalSec=</varname> and - <varname>StartLimitBurst=</varname>. See - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details on the per-service settings. - <varname>DefaultStartLimitIntervalSec=</varname> defaults to - 10s. <varname>DefaultStartLimitBurst=</varname> defaults to - 5.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DefaultEnvironment=</varname></term> - - <listitem><para>Sets manager environment variables passed to - all executed processes. Takes a space-separated list of - variable assignments. See - <citerefentry project='man-pages'><refentrytitle>environ</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details about environment variables.</para> - - <para>Example: - - <programlisting>DefaultEnvironment="VAR1=word1 word2" VAR2=word3 "VAR3=word 5 6"</programlisting> - - Sets three variables - <literal>VAR1</literal>, - <literal>VAR2</literal>, - <literal>VAR3</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DefaultCPUAccounting=</varname></term> - <term><varname>DefaultBlockIOAccounting=</varname></term> - <term><varname>DefaultMemoryAccounting=</varname></term> - <term><varname>DefaultTasksAccounting=</varname></term> - - <listitem><para>Configure the default resource accounting - settings, as configured per-unit by - <varname>CPUAccounting=</varname>, - <varname>BlockIOAccounting=</varname>, - <varname>MemoryAccounting=</varname> and - <varname>TasksAccounting=</varname>. See - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details on the per-unit - settings. <varname>DefaulTasksAccounting=</varname> defaults - to on, the other three settings to off.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DefaultTasksMax=</varname></term> - - <listitem><para>Configure the default value for the per-unit - <varname>TasksMax=</varname> setting. See - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. This setting applies to all unit types that - support resource control settings, with the exception of slice - units. Defaults to 512.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DefaultLimitCPU=</varname></term> - <term><varname>DefaultLimitFSIZE=</varname></term> - <term><varname>DefaultLimitDATA=</varname></term> - <term><varname>DefaultLimitSTACK=</varname></term> - <term><varname>DefaultLimitCORE=</varname></term> - <term><varname>DefaultLimitRSS=</varname></term> - <term><varname>DefaultLimitNOFILE=</varname></term> - <term><varname>DefaultLimitAS=</varname></term> - <term><varname>DefaultLimitNPROC=</varname></term> - <term><varname>DefaultLimitMEMLOCK=</varname></term> - <term><varname>DefaultLimitLOCKS=</varname></term> - <term><varname>DefaultLimitSIGPENDING=</varname></term> - <term><varname>DefaultLimitMSGQUEUE=</varname></term> - <term><varname>DefaultLimitNICE=</varname></term> - <term><varname>DefaultLimitRTPRIO=</varname></term> - <term><varname>DefaultLimitRTTIME=</varname></term> - - <listitem><para>These settings control various default - resource limits for units. See - <citerefentry><refentrytitle>setrlimit</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details. The resource limit is possible to specify in two formats, - <option>value</option> to set soft and hard limits to the same value, - or <option>soft:hard</option> to set both limits individually (e.g. DefaultLimitAS=4G:16G). - Use the string <varname>infinity</varname> to - configure no limit on a specific resource. The multiplicative - suffixes K (=1024), M (=1024*1024) and so on for G, T, P and E - may be used for resource limits measured in bytes - (e.g. DefaultLimitAS=16G). For the limits referring to time values, - the usual time units ms, s, min, h and so on may be used (see - <citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details). Note that if no time unit is specified for - <varname>DefaultLimitCPU=</varname> the default unit of seconds is - implied, while for <varname>DefaultLimitRTTIME=</varname> the default - unit of microseconds is implied. Also, note that the effective - granularity of the limits might influence their - enforcement. For example, time limits specified for - <varname>DefaultLimitCPU=</varname> will be rounded up implicitly to - multiples of 1s. These settings may be overridden in individual units - using the corresponding LimitXXX= directives. Note that these resource - limits are only defaults for units, they are not applied to PID 1 - itself.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>environ</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-sysusers.xml b/man/systemd-sysusers.xml deleted file mode 100644 index 4892caad12..0000000000 --- a/man/systemd-sysusers.xml +++ /dev/null @@ -1,116 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-sysusers" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-sysusers</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-sysusers</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-sysusers</refname> - <refname>systemd-sysusers.service</refname> - <refpurpose>Allocate system users and groups</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-sysusers</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="opt" rep="repeat"><replaceable>CONFIGFILE</replaceable></arg> - </cmdsynopsis> - - <para><filename>systemd-sysusers.service</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-sysusers</command> creates system users and - groups, based on the file format and location specified in - <citerefentry><refentrytitle>sysusers.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para> - - <para>If invoked with no arguments, it applies all directives from - all files found. If one or more filenames are passed on the - command line, only the directives in these files are applied. If - only the basename of a file is specified, all directories as - specified in - <citerefentry><refentrytitle>sysusers.d</refentrytitle><manvolnum>5</manvolnum></citerefentry> - are searched for a matching file. If the string - <filename>-</filename> is specified as filename, entries from the - standard input of the process are read.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--root=<replaceable>root</replaceable></option></term> - <listitem><para>Takes a directory path as an argument. All - paths will be prefixed with the given alternate - <replaceable>root</replaceable> path, including config search - paths. </para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sysusers.d</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-sysv-generator.xml b/man/systemd-sysv-generator.xml deleted file mode 100644 index 2353eb3efe..0000000000 --- a/man/systemd-sysv-generator.xml +++ /dev/null @@ -1,97 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-sysv-generator" conditional="HAVE_SYSV_COMPAT"> - - <refentryinfo> - <title>systemd-sysv-generator</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Documentation</contrib> - <firstname>Zbigniew</firstname> - <surname>Jędrzejewski-Szmek</surname> - <email>zbyszek@in.waw.pl</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-sysv-generator</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-sysv-generator</refname> - <refpurpose>Unit generator for SysV init scripts</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/usr/lib/systemd/system-generators/systemd-sysv-generator</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-sysv-generator</filename> is a generator - that creates wrapper .service units for - <ulink url="https://savannah.nongnu.org/projects/sysvinit">SysV init</ulink> - scripts in <filename>/etc/init.d/*</filename> at boot and when - configuration of the system manager is reloaded. This will allow - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - to support them similarly to native units.</para> - - <para><ulink url="http://refspecs.linuxbase.org/LSB_3.1.1/LSB-Core-generic/LSB-Core-generic/iniscrptact.html">LSB headers</ulink> - in SysV init scripts are interpreted, and the ordering specified - in the header is turned into dependencies between the generated - unit and other units. The LSB facilities - <literal>$remote_fs</literal>, <literal>$network</literal>, - <literal>$named</literal>, <literal>$portmap</literal>, - <literal>$time</literal> are supported and will be turned into - dependencies on specific native systemd targets. See - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more details.</para> - - <para>SysV runlevels have corresponding systemd targets - (<filename>runlevel<replaceable>X</replaceable>.target</filename>). - The wrapper unit that is generated will be wanted by those targets - which correspond to runlevels for which the script is - enabled.</para> - - <para><command>systemd</command> does not support SysV scripts as - part of early boot, so all wrapper units are ordered after - <filename>basic.target</filename>.</para> - - <para><filename>systemd-sysv-generator</filename> implements - <citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-timedated.service.xml b/man/systemd-timedated.service.xml deleted file mode 100644 index e44163aefb..0000000000 --- a/man/systemd-timedated.service.xml +++ /dev/null @@ -1,85 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-timedated.service" conditional='ENABLE_TIMEDATED'> - - <refentryinfo> - <title>systemd-timedated.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-timedated.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-timedated.service</refname> - <refname>systemd-timedated</refname> - <refpurpose>Time and date bus mechanism</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-timedated.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-timedated</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-timedated</filename> is a system service - that may be used as a mechanism to change the system clock and - timezone, as well as to enable/disable NTP time synchronization. - <filename>systemd-timedated</filename> is automatically activated - on request and terminates itself when it is unused.</para> - - <para>The tool - <citerefentry><refentrytitle>timedatectl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - is a command line client to this service.</para> - - <para>See the <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/timedated"> - developer documentation</ulink> for information about the APIs - <filename>systemd-timedated</filename> provides.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>timedatectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>localtime</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>hwclock</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-timesyncd.service.xml b/man/systemd-timesyncd.service.xml deleted file mode 100644 index 6ec384313b..0000000000 --- a/man/systemd-timesyncd.service.xml +++ /dev/null @@ -1,108 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Kay Sievers - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-timesyncd.service" conditional='ENABLE_TIMESYNCD'> - - <refentryinfo> - <title>systemd-timesyncd.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Kay</firstname> - <surname>Sievers</surname> - <email>kay@vrfy.org</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-timesyncd.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-timesyncd.service</refname> - <refname>systemd-timesyncd</refname> - <refpurpose>Network Time Synchronization</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-timesyncd.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-timesyncd</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-timesyncd</filename> is a system service - that may be used to synchronize the local system clock with a - remote Network Time Protocol server. It also saves the local time - to disk every time the clock has been synchronized and uses this - to possibly advance the system realtime clock on subsequent - reboots to ensure it monotonically advances even if the system - lacks a battery-buffered RTC chip.</para> - - <para>The NTP servers contacted are determined from the global - settings in - <citerefentry><refentrytitle>timesyncd.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - the per-link static settings in <filename>.network</filename> - files, and the per-link dynamic settings received over DHCP. See - <citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more details.</para> - - <para><citerefentry><refentrytitle>timedatectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s - <command>set-ntp</command> command may be used to enable and - start, or disable and stop this service.</para> - </refsect1> - - <refsect1> - <title>Files</title> - - <variablelist> - <varlistentry> - <term><filename>/var/lib/systemd/clock</filename></term> - - <listitem> - <para>This file contains the timestamp of the last successful - synchronization.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>timesyncd.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>timedatectl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>localtime</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>hwclock</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-tmpfiles.xml b/man/systemd-tmpfiles.xml deleted file mode 100644 index c1aab51551..0000000000 --- a/man/systemd-tmpfiles.xml +++ /dev/null @@ -1,200 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-tmpfiles" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-tmpfiles</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-tmpfiles</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-tmpfiles</refname> - <refname>systemd-tmpfiles-setup.service</refname> - <refname>systemd-tmpfiles-setup-dev.service</refname> - <refname>systemd-tmpfiles-clean.service</refname> - <refname>systemd-tmpfiles-clean.timer</refname> - <refpurpose>Creates, deletes and cleans up volatile - and temporary files and directories</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-tmpfiles</command> - <arg choice="opt" rep="repeat">OPTIONS</arg> - <arg choice="opt" rep="repeat"><replaceable>CONFIGFILE</replaceable></arg> - </cmdsynopsis> - - <para><filename>systemd-tmpfiles-setup.service</filename></para> - <para><filename>systemd-tmpfiles-setup-dev.service</filename></para> - <para><filename>systemd-tmpfiles-clean.service</filename></para> - <para><filename>systemd-tmpfiles-clean.timer</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-tmpfiles</command> creates, deletes, and - cleans up volatile and temporary files and directories, based on - the configuration file format and location specified in - <citerefentry><refentrytitle>tmpfiles.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para> - - <para>If invoked with no arguments, it applies all directives from all configuration - files. If one or more absolute filenames are passed on the command line, only the - directives in these files are applied. If <literal>-</literal> is specified instead - of a filename, directives are read from standard input. If only the basename of a - configuration file is specified, all configuration directories as specified in - <citerefentry><refentrytitle>tmpfiles.d</refentrytitle><manvolnum>5</manvolnum></citerefentry> - are searched for a matching file.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--create</option></term> - <listitem><para>If this option is passed, all files and - directories marked with - <varname>f</varname>, - <varname>F</varname>, - <varname>w</varname>, - <varname>d</varname>, - <varname>D</varname>, - <varname>v</varname>, - <varname>p</varname>, - <varname>L</varname>, - <varname>c</varname>, - <varname>b</varname>, - <varname>m</varname> - in the configuration files are created or written to. Files - and directories marked with - <varname>z</varname>, - <varname>Z</varname>, - <varname>t</varname>, - <varname>T</varname>, - <varname>a</varname>, and - <varname>A</varname> have their ownership, access mode and - security labels set. </para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--clean</option></term> - <listitem><para>If this option is passed, all files and - directories with an age parameter configured will be cleaned - up.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--remove</option></term> - <listitem><para>If this option is passed, the contents of - directories marked with <varname>D</varname> or - <varname>R</varname>, and files or directories themselves - marked with <varname>r</varname> or <varname>R</varname> are - removed.</para></listitem> - </varlistentry> - <varlistentry> - <term><option>--boot</option></term> - <listitem><para>Also execute lines with an exclamation mark. - </para></listitem> - </varlistentry> - <varlistentry> - <term><option>--prefix=<replaceable>path</replaceable></option></term> - <listitem><para>Only apply rules with paths that start with - the specified prefix. This option can be specified multiple - times.</para></listitem> - </varlistentry> - <varlistentry> - <term><option>--exclude-prefix=<replaceable>path</replaceable></option></term> - <listitem><para>Ignore rules with paths that start with the - specified prefix. This option can be specified multiple - times.</para></listitem> - </varlistentry> - <varlistentry> - <term><option>--root=<replaceable>root</replaceable></option></term> - <listitem><para>Takes a directory path as an argument. All - paths will be prefixed with the given alternate - <replaceable>root</replaceable> path, including config search - paths. </para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - - <para>It is possible to combine <option>--create</option>, - <option>--clean</option>, and <option>--remove</option> in one - invocation. For example, during boot the following command line is - executed to ensure that all temporary and volatile directories are - removed and created according to the configuration file:</para> - - <programlisting>systemd-tmpfiles --remove --create</programlisting> - - </refsect1> - - <refsect1> - <title>Unprivileged --cleanup operation</title> - - <para><command>systemd-tmpfiles</command> tries to avoid changing - the access and modification times on the directories it accesses, - which requires <constant>CAP_ADMIN</constant> privileges. When - running as non-root, directories which are checked for files to - clean up will have their access time bumped, which might prevent - their cleanup. - </para> - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure code - otherwise.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>tmpfiles.d</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-tty-ask-password-agent.xml b/man/systemd-tty-ask-password-agent.xml deleted file mode 100644 index 2876fab644..0000000000 --- a/man/systemd-tty-ask-password-agent.xml +++ /dev/null @@ -1,149 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd-tty-ask-password-agent" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-tty-ask-password-agent</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-tty-ask-password-agent</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-tty-ask-password-agent</refname> - <refpurpose>List or process pending systemd password requests</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd-tty-ask-password-agent <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="opt" rep="repeat">VARIABLE=VALUE</arg></command> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-tty-ask-password-agent</command> is a - password agent that handles password requests of the system, for - example for hard disk encryption passwords or SSL certificate - passwords that need to be queried at boot-time or during - runtime.</para> - - <para><command>systemd-tty-ask-password-agent</command> implements - the <ulink url="http://www.freedesktop.org/wiki/Software/systemd/PasswordAgents">Password - Agents Specification</ulink>.</para> - - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--list</option></term> - - <listitem><para>Lists all currently pending system password requests.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--query</option></term> - - <listitem><para>Process all currently pending system password - requests by querying the user on the calling - TTY.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--watch</option></term> - - <listitem><para>Continuously process password - requests.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--wall</option></term> - - <listitem><para>Forward password requests to - <citerefentry project='man-pages'><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry> - instead of querying the user on the calling - TTY.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--plymouth</option></term> - - <listitem><para>Ask question with - <citerefentry project='die-net'><refentrytitle>plymouth</refentrytitle><manvolnum>8</manvolnum></citerefentry> - instead of querying the user on the calling - TTY.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--console</option></term> - - <listitem><para>Ask question on - <filename>/dev/console</filename> instead of querying the user - on the calling TTY. </para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure - code otherwise.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-ask-password-console.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>plymouth</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-udevd.service.xml b/man/systemd-udevd.service.xml deleted file mode 100644 index 243fd06471..0000000000 --- a/man/systemd-udevd.service.xml +++ /dev/null @@ -1,188 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<refentry id="systemd-udevd.service" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd-udevd.service</title> - <productname>systemd</productname> - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Kay</firstname> - <surname>Sievers</surname> - <email>kay@vrfy.org</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-udevd.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-udevd.service</refname> - <refname>systemd-udevd-control.socket</refname> - <refname>systemd-udevd-kernel.socket</refname> - <refname>systemd-udevd</refname> - <refpurpose>Device event managing daemon</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-udevd.service</filename></para> - <para><filename>systemd-udevd-control.socket</filename></para> - <para><filename>systemd-udevd-kernel.socket</filename></para> - - <cmdsynopsis> - <command>/usr/lib/systemd/systemd-udevd</command> - <arg><option>--daemon</option></arg> - <arg><option>--debug</option></arg> - <arg><option>--children-max=</option></arg> - <arg><option>--exec-delay=</option></arg> - <arg><option>--event-timeout=</option></arg> - <arg><option>--resolve-names=early|late|never</option></arg> - <arg><option>--version</option></arg> - <arg><option>--help</option></arg> - </cmdsynopsis> - - </refsynopsisdiv> - - <refsect1><title>Description</title> - <para><command>systemd-udevd</command> listens to kernel uevents. - For every event, systemd-udevd executes matching instructions - specified in udev rules. See <citerefentry> - <refentrytitle>udev</refentrytitle><manvolnum>7</manvolnum> - </citerefentry>.</para> - - <para>The behavior of the daemon can be configured using - <citerefentry><refentrytitle>udev.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - its command line options, environment variables, and on the kernel - command line, or changed dynamically with <command>udevadm - control</command>. - </para> - </refsect1> - - <refsect1><title>Options</title> - <variablelist> - <varlistentry> - <term><option>--daemon</option></term> - <listitem> - <para>Detach and run in the background.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--debug</option></term> - <listitem> - <para>Print debug messages to standard error.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--children-max=</option></term> - <listitem> - <para>Limit the number of events executed in parallel.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--exec-delay=</option></term> - <listitem> - <para>Delay the execution of <varname>RUN</varname> - instructions by the given number of seconds. This option - might be useful when debugging system crashes during - coldplug caused by loading non-working kernel - modules.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--event-timeout=</option></term> - <listitem> - <para>Set the number of seconds to wait for events to finish. After - this time, the event will be terminated. The default is 180 seconds.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--resolve-names=</option></term> - <listitem> - <para>Specify when systemd-udevd should resolve names of users and groups. - When set to <option>early</option> (the default), names will be - resolved when the rules are parsed. When set to - <option>late</option>, names will be resolved for every event. - When set to <option>never</option>, names will never be resolved - and all devices will be owned by root.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>--help</option></term> - - <xi:include href="standard-options.xml" xpointer="help-text" /> - </varlistentry> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - </refsect1> - - <refsect1><title>Kernel command line</title> - <variablelist class='kernel-commandline-options'> - <para>Parameters starting with "rd." will be read when - <command>systemd-udevd</command> is used in an initrd.</para> - <varlistentry> - <term><varname>udev.log-priority=</varname></term> - <term><varname>rd.udev.log-priority=</varname></term> - <listitem> - <para>Set the log level.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>udev.children-max=</varname></term> - <term><varname>rd.udev.children-max=</varname></term> - <listitem> - <para>Limit the number of events executed in parallel.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>udev.exec-delay=</varname></term> - <term><varname>rd.udev.exec-delay=</varname></term> - <listitem> - <para>Delay the execution of <varname>RUN</varname> instructions by the given - number of seconds. This option might be useful when - debugging system crashes during coldplug caused by loading - non-working kernel modules.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>udev.event-timeout=</varname></term> - <term><varname>rd.udev.event-timeout=</varname></term> - <listitem> - <para>Wait for events to finish up to the given number - of seconds. This option might be useful if events are - terminated due to kernel drivers taking too long to initialize.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>net.ifnames=</varname></term> - <listitem> - <para>Network interfaces are renamed to give them predictable names - when possible. It is enabled by default; specifying 0 disables it.</para> - </listitem> - </varlistentry> - </variablelist> - <!-- when adding entries here, consider also adding them - in kernel-command-line.xml --> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>udev.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udevadm</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> -</refentry> diff --git a/man/systemd-update-done.service.xml b/man/systemd-update-done.service.xml deleted file mode 100644 index a2dad39f01..0000000000 --- a/man/systemd-update-done.service.xml +++ /dev/null @@ -1,97 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2014 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-update-done.service"> - - <refentryinfo> - <title>systemd-update-done.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-update-done.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-update-done.service</refname> - <refname>systemd-update-done</refname> - <refpurpose>Mark <filename>/etc</filename> and <filename>/var</filename> fully updated</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-update-done.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-update-done</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-update-done.service</filename> is a - service that is invoked as part of the first boot after the vendor - operating system resources in <filename>/usr</filename> have been - updated. This is useful to implement offline updates of - <filename>/usr</filename> which might require updates to - <filename>/etc</filename> or <filename>/var</filename> on the - following boot.</para> - - <para><filename>systemd-update-done.service</filename> updates the - file modification time (mtime) of the stamp files - <filename>/etc/.updated</filename> and - <filename>/var/.updated</filename> to the modification time of the - <filename>/usr</filename> directory, unless the stamp files are - already newer.</para> - - <para>Services that shall run after offline upgrades of - <filename>/usr</filename> should order themselves before - <filename>systemd-update-done.service</filename>, and use the - <varname>ConditionNeedsUpdate=</varname> (see - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>) - condition to make sure to run when <filename>/etc</filename> or - <filename>/var</filename> are older than <filename>/usr</filename> - according to the modification times of the files described above. - This requires that updates to <filename>/usr</filename> are always - followed by an update of the modification time of - <filename>/usr</filename>, for example by invoking - <citerefentry project='man-pages'><refentrytitle>touch</refentrytitle><manvolnum>1</manvolnum></citerefentry> - on it.</para> - - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>touch</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-update-utmp.service.xml b/man/systemd-update-utmp.service.xml deleted file mode 100644 index c8a9cb7c90..0000000000 --- a/man/systemd-update-utmp.service.xml +++ /dev/null @@ -1,76 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-update-utmp.service" conditional="HAVE_UTMP"> - - <refentryinfo> - <title>systemd-update-utmp.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-update-utmp.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-update-utmp.service</refname> - <refname>systemd-update-utmp-runlevel.service</refname> - <refname>systemd-update-utmp</refname> - <refpurpose>Write audit and utmp updates at bootup, runlevel - changes and shutdown</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-update-utmp.service</filename></para> - <para><filename>systemd-update-utmp-runlevel.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-update-utmp</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-update-utmp-runlevel.service</filename> is - a service that writes SysV runlevel changes to utmp and wtmp, as - well as the audit logs, as they occur. - <filename>systemd-update-utmp.service</filename> does the same for - system reboots and shutdown requests.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>utmp</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>auditd</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-user-sessions.service.xml b/man/systemd-user-sessions.service.xml deleted file mode 100644 index 67aba54119..0000000000 --- a/man/systemd-user-sessions.service.xml +++ /dev/null @@ -1,75 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-user-sessions.service" conditional='HAVE_PAM'> - - <refentryinfo> - <title>systemd-user-sessions.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-user-sessions.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-user-sessions.service</refname> - <refname>systemd-user-sessions</refname> - <refpurpose>Permit user logins after boot, prohibit user logins at shutdown</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-user-sessions.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-user-sessions</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-user-sessions.service</filename> is a - service that controls user logins through - <citerefentry project='man-pages'><refentrytitle>pam_nologin</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - After basic system initialization is complete, it removes - <filename>/run/nologin</filename>, thus permitting logins. Before - system shutdown, it creates <filename>/run/nologin</filename>, thus - prohibiting further logins.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-logind.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>pam_nologin</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd-vconsole-setup.service.xml b/man/systemd-vconsole-setup.service.xml deleted file mode 100644 index ff079761c1..0000000000 --- a/man/systemd-vconsole-setup.service.xml +++ /dev/null @@ -1,114 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd-vconsole-setup.service" conditional='ENABLE_VCONSOLE'> - - <refentryinfo> - <title>systemd-vconsole-setup.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd-vconsole-setup.service</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd-vconsole-setup.service</refname> - <refname>systemd-vconsole-setup</refname> - <refpurpose>Configure the virtual console at boot</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>systemd-vconsole-setup.service</filename></para> - <para><filename>/usr/lib/systemd/systemd-vconsole-setup</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><filename>systemd-vconsole-setup.service</filename> is an - early boot service that configures the virtual console font and - console keymap. Internally it calls - <citerefentry project='mankier'><refentrytitle>loadkeys</refentrytitle><manvolnum>1</manvolnum></citerefentry> - and - <citerefentry project='die-net'><refentrytitle>setfont</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - - <para>See - <citerefentry><refentrytitle>vconsole.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for information about the configuration files understood by this - service.</para> - - - </refsect1> - - <refsect1> - <title>Kernel Command Line</title> - - <para>A few configuration parameters from - <filename>vconsole.conf</filename> may be overridden on the kernel - command line:</para> - - <variablelist class='kernel-commandline-options'> - <varlistentry> - <term><varname>vconsole.keymap=</varname></term> - <term><varname>vconsole.keymap.toggle=</varname></term> - - <listitem><para>Overrides the key mapping table for the - keyboard and the second toggle keymap.</para></listitem> - </varlistentry> - <varlistentry> - - <term><varname>vconsole.font=</varname></term> - <term><varname>vconsole.font.map=</varname></term> - <term><varname>vconsole.font.unimap=</varname></term> - - <listitem><para>Configures the console font, the console map, - and the unicode font map.</para></listitem> - </varlistentry> - </variablelist> - - <para>See - <citerefentry><refentrytitle>vconsole.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for information about these settings.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>vconsole.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='mankier'><refentrytitle>loadkeys</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>setfont</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-localed.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.automount.xml b/man/systemd.automount.xml deleted file mode 100644 index a43dc981bd..0000000000 --- a/man/systemd.automount.xml +++ /dev/null @@ -1,173 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.automount"> - <refentryinfo> - <title>systemd.automount</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.automount</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.automount</refname> - <refpurpose>Automount unit configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>automount</replaceable>.automount</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>A unit configuration file whose name ends in - <literal>.automount</literal> encodes information about a file - system automount point controlled and supervised by - systemd.</para> - - <para>This man page lists the configuration options specific to - this unit type. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for the common options of all unit configuration files. The common - configuration items are configured in the generic [Unit] and - [Install] sections. The automount specific configuration options - are configured in the [Automount] section.</para> - - <para>Automount units must be named after the automount directories they control. Example: the automount point - <filename noindex='true'>/home/lennart</filename> must be configured in a unit file - <filename>home-lennart.automount</filename>. For details about the escaping logic used to convert a file system - path to a unit name see - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. Note that - automount units cannot be templated, nor is it possible to add multiple names to an automount unit by creating - additional symlinks to its unit file.</para> - - <para>For each automount unit file a matching mount unit file (see - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details) must exist which is activated when the automount path - is accessed. Example: if an automount unit - <filename>home-lennart.automount</filename> is active and the user - accesses <filename>/home/lennart</filename> the mount unit - <filename>home-lennart.mount</filename> will be activated.</para> - - <para>Automount units may be used to implement on-demand mounting - as well as parallelized mounting of file systems.</para> - </refsect1> - - <refsect1> - <title>Automatic Dependencies</title> - - <para>If an automount unit is beneath another mount unit in the - file system hierarchy, both a requirement and an ordering - dependency between both units are created automatically.</para> - - <para>An implicit <varname>Before=</varname> dependency is created - between an automount unit and the mount unit it activates.</para> - - <para>Automount units acquire automatic <varname>Before=</varname> and <varname>Conflicts=</varname> on - <filename>umount.target</filename> in order to be stopped during shutdown, unless - <varname>DefaultDependencies=no</varname> is set in the <literal>[Unit]</literal> section.</para> - - </refsect1> - - <refsect1> - <title><filename>fstab</filename></title> - - <para>Automount units may either be configured via unit files, or - via <filename>/etc/fstab</filename> (see - <citerefentry project='man-pages'><refentrytitle>fstab</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details).</para> - - <para>For details how systemd parses - <filename>/etc/fstab</filename> see - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - - <para>If an automount point is configured in both - <filename>/etc/fstab</filename> and a unit file, the configuration - in the latter takes precedence.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>Automount files must include an [Automount] section, which - carries information about the file system automount points it - supervises. The options specific to the [Automount] section of - automount units are the following:</para> - - <variablelist class='unit-directives'> - - <varlistentry> - <term><varname>Where=</varname></term> - <listitem><para>Takes an absolute path of a directory of the - automount point. If the automount point does not exist at time - that the automount point is installed, it is created. This - string must be reflected in the unit filename. (See above.) - This option is mandatory.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DirectoryMode=</varname></term> - <listitem><para>Directories of automount points (and any - parent directories) are automatically created if needed. This - option specifies the file system access mode used when - creating these directories. Takes an access mode in octal - notation. Defaults to 0755.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>TimeoutIdleSec=</varname></term> - <listitem><para>Configures an idle timeout. Once the mount has been - idle for the specified time, systemd will attempt to unmount. Takes a - unit-less value in seconds, or a time span value such as "5min 20s". - Pass 0 to disable the timeout logic. The timeout is disabled by - default.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>mount</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>automount</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.device.xml b/man/systemd.device.xml deleted file mode 100644 index effed098dd..0000000000 --- a/man/systemd.device.xml +++ /dev/null @@ -1,182 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.device"> - <refentryinfo> - <title>systemd.device</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.device</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.device</refname> - <refpurpose>Device unit configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>device</replaceable>.device</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>A unit configuration file whose name ends in - <literal>.device</literal> encodes information about a device unit - as exposed in the - sysfs/<citerefentry><refentrytitle>udev</refentrytitle><manvolnum>7</manvolnum></citerefentry> - device tree.</para> - - <para>This unit type has no specific options. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for the common options of all unit configuration files. The common - configuration items are configured in the generic - <literal>[Unit]</literal> and <literal>[Install]</literal> - sections. A separate <literal>[Device]</literal> section does not - exist, since no device-specific options may be configured.</para> - - <para>systemd will dynamically create device units for all kernel - devices that are marked with the "systemd" udev tag (by default - all block and network devices, and a few others). This may be used - to define dependencies between devices and other units. To tag a - udev device, use <literal>TAG+="systemd"</literal> in the udev - rules file, see - <citerefentry><refentrytitle>udev</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details.</para> - - <para>Device units are named after the <filename>/sys</filename> - and <filename>/dev</filename> paths they control. Example: the - device <filename noindex='true'>/dev/sda5</filename> is exposed in - systemd as <filename>dev-sda5.device</filename>. For details about - the escaping logic used to convert a file system path to a unit - name see - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>Automatic Dependencies</title> - - <para>Many unit types automatically acquire dependencies on device - units of devices they require. For example, - <filename>.socket</filename> unit acquire dependencies on the - device units of the network interface specified in - <varname>BindToDevice=</varname>. Similar, swap and mount units - acquire dependencies on the units encapsulating their backing - block devices.</para> - </refsect1> - - <refsect1> - <title>The udev Database</title> - - <para>The settings of device units may either be configured via - unit files, or directly from the udev database (which is - recommended). The following udev device properties are understood - by systemd:</para> - - <variablelist class='udev-directives'> - <varlistentry> - <term><varname>SYSTEMD_WANTS=</varname></term> - <term><varname>SYSTEMD_USER_WANTS=</varname></term> - <listitem><para>Adds dependencies of type - <varname>Wants</varname> from the device unit to all listed - units. The first form is used by the system systemd instance, - the second by user systemd instances. Those settings may be - used to activate arbitrary units when a specific device - becomes available.</para> - - <para>Note that this and the other tags are not taken into - account unless the device is tagged with the - <literal>systemd</literal> string in the udev database, - because otherwise the device is not exposed as a systemd unit - (see above).</para> - - <para>Note that systemd will only act on - <varname>Wants</varname> dependencies when a device first - becomes active. It will not act on them if they are added to - devices that are already active. Use - <varname>SYSTEMD_READY=</varname> (see below) to influence on - which udev event to trigger the dependencies. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SYSTEMD_ALIAS=</varname></term> - <listitem><para>Adds an additional alias name to the device - unit. This must be an absolute path that is automatically - transformed into a unit name. (See above.)</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SYSTEMD_READY=</varname></term> - <listitem><para>If set to 0, systemd will consider this device - unplugged even if it shows up in the udev tree. If this - property is unset or set to 1, the device will be considered - plugged if it is visible in the udev tree. This property has - no influence on the behavior when a device disappears from the - udev tree.</para> - - <para>This option is useful to support devices that initially - show up in an uninitialized state in the tree, and for which a - <literal>changed</literal> event is generated the moment they - are fully set up. Note that <varname>SYSTEMD_WANTS=</varname> - (see above) is not acted on as long as - <varname>SYSTEMD_READY=0</varname> is set for a - device.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ID_MODEL_FROM_DATABASE=</varname></term> - <term><varname>ID_MODEL=</varname></term> - - <listitem><para>If set, this property is used as description - string for the device unit.</para></listitem> - </varlistentry> - - </variablelist> - - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.exec.xml b/man/systemd.exec.xml deleted file mode 100644 index 3cf6de8256..0000000000 --- a/man/systemd.exec.xml +++ /dev/null @@ -1,1475 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.exec"> - <refentryinfo> - <title>systemd.exec</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.exec</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.exec</refname> - <refpurpose>Execution environment configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>service</replaceable>.service</filename>, - <filename><replaceable>socket</replaceable>.socket</filename>, - <filename><replaceable>mount</replaceable>.mount</filename>, - <filename><replaceable>swap</replaceable>.swap</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>Unit configuration files for services, sockets, mount - points, and swap devices share a subset of configuration options - which define the execution environment of spawned - processes.</para> - - <para>This man page lists the configuration options shared by - these four unit types. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for the common options of all unit configuration files, and - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - and - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information on the specific unit configuration files. The - execution specific configuration options are configured in the - [Service], [Socket], [Mount], or [Swap] sections, depending on the - unit type.</para> - </refsect1> - - <refsect1> - <title>Automatic Dependencies</title> - - <para>A few execution parameters result in additional, automatic - dependencies to be added.</para> - - <para>Units with <varname>WorkingDirectory=</varname> or - <varname>RootDirectory=</varname> set automatically gain - dependencies of type <varname>Requires=</varname> and - <varname>After=</varname> on all mount units required to access - the specified paths. This is equivalent to having them listed - explicitly in <varname>RequiresMountsFor=</varname>.</para> - - <para>Similar, units with <varname>PrivateTmp=</varname> enabled - automatically get mount unit dependencies for all mounts - required to access <filename>/tmp</filename> and - <filename>/var/tmp</filename>.</para> - - <para>Units whose standard output or error output is connected to <option>journal</option>, <option>syslog</option> - or <option>kmsg</option> (or their combinations with console output, see below) automatically acquire dependencies - of type <varname>After=</varname> on <filename>systemd-journald.socket</filename>.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <variablelist class='unit-directives'> - - <varlistentry> - <term><varname>WorkingDirectory=</varname></term> - - <listitem><para>Takes an absolute directory path, or the - special value <literal>~</literal>. Sets the working directory - for executed processes. If set to <literal>~</literal>, the - home directory of the user specified in - <varname>User=</varname> is used. If not set, defaults to the - root directory when systemd is running as a system instance - and the respective user's home directory if run as user. If - the setting is prefixed with the <literal>-</literal> - character, a missing working directory is not considered - fatal. Note that setting this parameter might result in - additional dependencies to be added to the unit (see - above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RootDirectory=</varname></term> - - <listitem><para>Takes an absolute directory path. Sets the - root directory for executed processes, with the <citerefentry - project='man-pages'><refentrytitle>chroot</refentrytitle><manvolnum>2</manvolnum></citerefentry> - system call. If this is used, it must be ensured that the - process binary and all its auxiliary files are available in - the <function>chroot()</function> jail. Note that setting this - parameter might result in additional dependencies to be added - to the unit (see above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>User=</varname></term> - <term><varname>Group=</varname></term> - - <listitem><para>Sets the Unix user or group that the processes - are executed as, respectively. Takes a single user or group - name or ID as argument. If no group is set, the default group - of the user is chosen.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SupplementaryGroups=</varname></term> - - <listitem><para>Sets the supplementary Unix groups the - processes are executed as. This takes a space-separated list - of group names or IDs. This option may be specified more than - once, in which case all listed groups are set as supplementary - groups. When the empty string is assigned, the list of - supplementary groups is reset, and all assignments prior to - this one will have no effect. In any way, this option does not - override, but extends the list of supplementary groups - configured in the system group database for the - user.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Nice=</varname></term> - - <listitem><para>Sets the default nice level (scheduling - priority) for executed processes. Takes an integer between -20 - (highest priority) and 19 (lowest priority). See - <citerefentry><refentrytitle>setpriority</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>OOMScoreAdjust=</varname></term> - - <listitem><para>Sets the adjustment level for the - Out-Of-Memory killer for executed processes. Takes an integer - between -1000 (to disable OOM killing for this process) and - 1000 (to make killing of this process under memory pressure - very likely). See <ulink - url="https://www.kernel.org/doc/Documentation/filesystems/proc.txt">proc.txt</ulink> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>IOSchedulingClass=</varname></term> - - <listitem><para>Sets the I/O scheduling class for executed - processes. Takes an integer between 0 and 3 or one of the - strings <option>none</option>, <option>realtime</option>, - <option>best-effort</option> or <option>idle</option>. See - <citerefentry><refentrytitle>ioprio_set</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>IOSchedulingPriority=</varname></term> - - <listitem><para>Sets the I/O scheduling priority for executed - processes. Takes an integer between 0 (highest priority) and 7 - (lowest priority). The available priorities depend on the - selected I/O scheduling class (see above). See - <citerefentry><refentrytitle>ioprio_set</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>CPUSchedulingPolicy=</varname></term> - - <listitem><para>Sets the CPU scheduling policy for executed - processes. Takes one of - <option>other</option>, - <option>batch</option>, - <option>idle</option>, - <option>fifo</option> or - <option>rr</option>. See - <citerefentry><refentrytitle>sched_setscheduler</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>CPUSchedulingPriority=</varname></term> - - <listitem><para>Sets the CPU scheduling priority for executed - processes. The available priority range depends on the - selected CPU scheduling policy (see above). For real-time - scheduling policies an integer between 1 (lowest priority) and - 99 (highest priority) can be used. See - <citerefentry><refentrytitle>sched_setscheduler</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>CPUSchedulingResetOnFork=</varname></term> - - <listitem><para>Takes a boolean argument. If true, elevated - CPU scheduling priorities and policies will be reset when the - executed processes fork, and can hence not leak into child - processes. See - <citerefentry><refentrytitle>sched_setscheduler</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details. Defaults to false.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>CPUAffinity=</varname></term> - - <listitem><para>Controls the CPU affinity of the executed - processes. Takes a list of CPU indices or ranges separated by - either whitespace or commas. CPU ranges are specified by the - lower and upper CPU indices separated by a dash. - This option may be specified more than once, in which case the - specified CPU affinity masks are merged. If the empty string - is assigned, the mask is reset, all assignments prior to this - will have no effect. See - <citerefentry><refentrytitle>sched_setaffinity</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>UMask=</varname></term> - - <listitem><para>Controls the file mode creation mask. Takes an - access mode in octal notation. See - <citerefentry><refentrytitle>umask</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details. Defaults to 0022.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Environment=</varname></term> - - <listitem><para>Sets environment variables for executed - processes. Takes a space-separated list of variable - assignments. This option may be specified more than once, in - which case all listed variables will be set. If the same - variable is set twice, the later setting will override the - earlier setting. If the empty string is assigned to this - option, the list of environment variables is reset, all prior - assignments have no effect. Variable expansion is not - performed inside the strings, however, specifier expansion is - possible. The $ character has no special meaning. If you need - to assign a value containing spaces to a variable, use double - quotes (") for the assignment.</para> - - <para>Example: - <programlisting>Environment="VAR1=word1 word2" VAR2=word3 "VAR3=$word 5 6"</programlisting> - gives three variables <literal>VAR1</literal>, - <literal>VAR2</literal>, <literal>VAR3</literal> - with the values <literal>word1 word2</literal>, - <literal>word3</literal>, <literal>$word 5 6</literal>. - </para> - - <para> - See - <citerefentry project='man-pages'><refentrytitle>environ</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details about environment variables.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>EnvironmentFile=</varname></term> - <listitem><para>Similar to <varname>Environment=</varname> but - reads the environment variables from a text file. The text - file should contain new-line-separated variable assignments. - Empty lines, lines without an <literal>=</literal> separator, - or lines starting with ; or # will be ignored, - which may be used for commenting. A line ending with a - backslash will be concatenated with the following one, - allowing multiline variable definitions. The parser strips - leading and trailing whitespace from the values of - assignments, unless you use double quotes (").</para> - - <para>The argument passed should be an absolute filename or - wildcard expression, optionally prefixed with - <literal>-</literal>, which indicates that if the file does - not exist, it will not be read and no error or warning message - is logged. This option may be specified more than once in - which case all specified files are read. If the empty string - is assigned to this option, the list of file to read is reset, - all prior assignments have no effect.</para> - - <para>The files listed with this directive will be read - shortly before the process is executed (more specifically, - after all processes from a previous unit state terminated. - This means you can generate these files in one unit state, and - read it with this option in the next).</para> - - <para>Settings from these - files override settings made with - <varname>Environment=</varname>. If the same variable is set - twice from these files, the files will be read in the order - they are specified and the later setting will override the - earlier setting.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>PassEnvironment=</varname></term> - - <listitem><para>Pass environment variables from the systemd system - manager to executed processes. Takes a space-separated list of variable - names. This option may be specified more than once, in which case all - listed variables will be set. If the empty string is assigned to this - option, the list of environment variables is reset, all prior - assignments have no effect. Variables that are not set in the system - manager will not be passed and will be silently ignored.</para> - - <para>Variables passed from this setting are overridden by those passed - from <varname>Environment=</varname> or - <varname>EnvironmentFile=</varname>.</para> - - <para>Example: - <programlisting>PassEnvironment=VAR1 VAR2 VAR3</programlisting> - passes three variables <literal>VAR1</literal>, - <literal>VAR2</literal>, <literal>VAR3</literal> - with the values set for those variables in PID1.</para> - - <para> - See - <citerefentry project='man-pages'><refentrytitle>environ</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details about environment variables.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>StandardInput=</varname></term> - <listitem><para>Controls where file descriptor 0 (STDIN) of - the executed processes is connected to. Takes one of - <option>null</option>, - <option>tty</option>, - <option>tty-force</option>, - <option>tty-fail</option> or - <option>socket</option>.</para> - - <para>If <option>null</option> is selected, standard input - will be connected to <filename>/dev/null</filename>, i.e. all - read attempts by the process will result in immediate - EOF.</para> - - <para>If <option>tty</option> is selected, standard input is - connected to a TTY (as configured by - <varname>TTYPath=</varname>, see below) and the executed - process becomes the controlling process of the terminal. If - the terminal is already being controlled by another process, - the executed process waits until the current controlling - process releases the terminal.</para> - - <para><option>tty-force</option> is similar to - <option>tty</option>, but the executed process is forcefully - and immediately made the controlling process of the terminal, - potentially removing previous controlling processes from the - terminal.</para> - - <para><option>tty-fail</option> is similar to - <option>tty</option> but if the terminal already has a - controlling process start-up of the executed process - fails.</para> - - <para>The <option>socket</option> option is only valid in - socket-activated services, and only when the socket - configuration file (see - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details) specifies a single socket only. If this option is - set, standard input will be connected to the socket the - service was activated from, which is primarily useful for - compatibility with daemons designed for use with the - traditional - <citerefentry project='freebsd'><refentrytitle>inetd</refentrytitle><manvolnum>8</manvolnum></citerefentry> - daemon.</para> - - <para>This setting defaults to - <option>null</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>StandardOutput=</varname></term> - <listitem><para>Controls where file descriptor 1 (STDOUT) of - the executed processes is connected to. Takes one of - <option>inherit</option>, - <option>null</option>, - <option>tty</option>, - <option>journal</option>, - <option>syslog</option>, - <option>kmsg</option>, - <option>journal+console</option>, - <option>syslog+console</option>, - <option>kmsg+console</option> or - <option>socket</option>.</para> - - <para><option>inherit</option> duplicates the file descriptor - of standard input for standard output.</para> - - <para><option>null</option> connects standard output to - <filename>/dev/null</filename>, i.e. everything written to it - will be lost.</para> - - <para><option>tty</option> connects standard output to a tty - (as configured via <varname>TTYPath=</varname>, see below). If - the TTY is used for output only, the executed process will not - become the controlling process of the terminal, and will not - fail or wait for other processes to release the - terminal.</para> - - <para><option>journal</option> connects standard output with - the journal which is accessible via - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - Note that everything that is written to syslog or kmsg (see - below) is implicitly stored in the journal as well, the - specific two options listed below are hence supersets of this - one.</para> - - <para><option>syslog</option> connects standard output to the - <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry> - system syslog service, in addition to the journal. Note that - the journal daemon is usually configured to forward everything - it receives to syslog anyway, in which case this option is no - different from <option>journal</option>.</para> - - <para><option>kmsg</option> connects standard output with the - kernel log buffer which is accessible via - <citerefentry project='man-pages'><refentrytitle>dmesg</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - in addition to the journal. The journal daemon might be - configured to send all logs to kmsg anyway, in which case this - option is no different from <option>journal</option>.</para> - - <para><option>journal+console</option>, - <option>syslog+console</option> and - <option>kmsg+console</option> work in a similar way as the - three options above but copy the output to the system console - as well.</para> - - <para><option>socket</option> connects standard output to a - socket acquired via socket activation. The semantics are - similar to the same option of - <varname>StandardInput=</varname>.</para> - - <para>If the standard output (or error output, see below) of a unit is connected to the journal, syslog or the - kernel log buffer, the unit will implicitly gain a dependency of type <varname>After=</varname> on - <filename>systemd-journald.socket</filename> (also see the automatic dependencies section above).</para> - - <para>This setting defaults to the value set with - <option>DefaultStandardOutput=</option> in - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - which defaults to <option>journal</option>. Note that setting - this parameter might result in additional dependencies to be - added to the unit (see above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>StandardError=</varname></term> - <listitem><para>Controls where file descriptor 2 (STDERR) of - the executed processes is connected to. The available options - are identical to those of <varname>StandardOutput=</varname>, - with one exception: if set to <option>inherit</option> the - file descriptor used for standard output is duplicated for - standard error. This setting defaults to the value set with - <option>DefaultStandardError=</option> in - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - which defaults to <option>inherit</option>. Note that setting - this parameter might result in additional dependencies to be - added to the unit (see above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>TTYPath=</varname></term> - <listitem><para>Sets the terminal device node to use if - standard input, output, or error are connected to a TTY (see - above). Defaults to - <filename>/dev/console</filename>.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>TTYReset=</varname></term> - <listitem><para>Reset the terminal device specified with - <varname>TTYPath=</varname> before and after execution. - Defaults to <literal>no</literal>.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>TTYVHangup=</varname></term> - <listitem><para>Disconnect all clients which have opened the - terminal device specified with <varname>TTYPath=</varname> - before and after execution. Defaults to - <literal>no</literal>.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>TTYVTDisallocate=</varname></term> - <listitem><para>If the terminal device specified with - <varname>TTYPath=</varname> is a virtual console terminal, try - to deallocate the TTY before and after execution. This ensures - that the screen and scrollback buffer is cleared. Defaults to - <literal>no</literal>.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SyslogIdentifier=</varname></term> - <listitem><para>Sets the process name to prefix log lines sent - to the logging system or the kernel log buffer with. If not - set, defaults to the process name of the executed process. - This option is only useful when - <varname>StandardOutput=</varname> or - <varname>StandardError=</varname> are set to - <option>syslog</option>, <option>journal</option> or - <option>kmsg</option> (or to the same settings in combination - with <option>+console</option>).</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SyslogFacility=</varname></term> - <listitem><para>Sets the syslog facility to use when logging - to syslog. One of <option>kern</option>, - <option>user</option>, <option>mail</option>, - <option>daemon</option>, <option>auth</option>, - <option>syslog</option>, <option>lpr</option>, - <option>news</option>, <option>uucp</option>, - <option>cron</option>, <option>authpriv</option>, - <option>ftp</option>, <option>local0</option>, - <option>local1</option>, <option>local2</option>, - <option>local3</option>, <option>local4</option>, - <option>local5</option>, <option>local6</option> or - <option>local7</option>. See - <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for details. This option is only useful when - <varname>StandardOutput=</varname> or - <varname>StandardError=</varname> are set to - <option>syslog</option>. Defaults to - <option>daemon</option>.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>SyslogLevel=</varname></term> - <listitem><para>The default syslog level to use when logging to - syslog or the kernel log buffer. One of - <option>emerg</option>, - <option>alert</option>, - <option>crit</option>, - <option>err</option>, - <option>warning</option>, - <option>notice</option>, - <option>info</option>, - <option>debug</option>. See - <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for details. This option is only useful when - <varname>StandardOutput=</varname> or - <varname>StandardError=</varname> are set to - <option>syslog</option> or <option>kmsg</option>. Note that - individual lines output by the daemon might be prefixed with a - different log level which can be used to override the default - log level specified here. The interpretation of these prefixes - may be disabled with <varname>SyslogLevelPrefix=</varname>, - see below. For details, see - <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - - Defaults to - <option>info</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SyslogLevelPrefix=</varname></term> - <listitem><para>Takes a boolean argument. If true and - <varname>StandardOutput=</varname> or - <varname>StandardError=</varname> are set to - <option>syslog</option>, <option>kmsg</option> or - <option>journal</option>, log lines written by the executed - process that are prefixed with a log level will be passed on - to syslog with this log level set but the prefix removed. If - set to false, the interpretation of these prefixes is disabled - and the logged lines are passed on as-is. For details about - this prefixing see - <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - Defaults to true.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>TimerSlackNSec=</varname></term> - <listitem><para>Sets the timer slack in nanoseconds for the - executed processes. The timer slack controls the accuracy of - wake-ups triggered by timers. See - <citerefentry><refentrytitle>prctl</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for more information. Note that in contrast to most other time - span definitions this parameter takes an integer value in - nano-seconds if no unit is specified. The usual time units are - understood too.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>LimitCPU=</varname></term> - <term><varname>LimitFSIZE=</varname></term> - <term><varname>LimitDATA=</varname></term> - <term><varname>LimitSTACK=</varname></term> - <term><varname>LimitCORE=</varname></term> - <term><varname>LimitRSS=</varname></term> - <term><varname>LimitNOFILE=</varname></term> - <term><varname>LimitAS=</varname></term> - <term><varname>LimitNPROC=</varname></term> - <term><varname>LimitMEMLOCK=</varname></term> - <term><varname>LimitLOCKS=</varname></term> - <term><varname>LimitSIGPENDING=</varname></term> - <term><varname>LimitMSGQUEUE=</varname></term> - <term><varname>LimitNICE=</varname></term> - <term><varname>LimitRTPRIO=</varname></term> - <term><varname>LimitRTTIME=</varname></term> - <listitem><para>Set soft and hard limits on various resources for executed processes. See - <citerefentry><refentrytitle>setrlimit</refentrytitle><manvolnum>2</manvolnum></citerefentry> for details on - the resource limit concept. Resource limits may be specified in two formats: either as single value to set a - specific soft and hard limit to the same value, or as colon-separated pair <option>soft:hard</option> to set - both limits individually (e.g. <literal>LimitAS=4G:16G</literal>). Use the string <varname>infinity</varname> - to configure no limit on a specific resource. The multiplicative suffixes K, M, G, T, P and E (to the base - 1024) may be used for resource limits measured in bytes (e.g. LimitAS=16G). For the limits referring to time - values, the usual time units ms, s, min, h and so on may be used (see - <citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry> for - details). Note that if no time unit is specified for <varname>LimitCPU=</varname> the default unit of seconds - is implied, while for <varname>LimitRTTIME=</varname> the default unit of microseconds is implied. Also, note - that the effective granularity of the limits might influence their enforcement. For example, time limits - specified for <varname>LimitCPU=</varname> will be rounded up implicitly to multiples of 1s. For - <varname>LimitNICE=</varname> the value may be specified in two syntaxes: if prefixed with <literal>+</literal> - or <literal>-</literal>, the value is understood as regular Linux nice value in the range -20..19. If not - prefixed like this the value is understood as raw resource limit parameter in the range 0..40 (with 0 being - equivalent to 1).</para> - - <para>Note that most process resource limits configured with - these options are per-process, and processes may fork in order - to acquire a new set of resources that are accounted - independently of the original process, and may thus escape - limits set. Also note that <varname>LimitRSS=</varname> is not - implemented on Linux, and setting it has no effect. Often it - is advisable to prefer the resource controls listed in - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry> - over these per-process limits, as they apply to services as a - whole, may be altered dynamically at runtime, and are - generally more expressive. For example, - <varname>MemoryLimit=</varname> is a more powerful (and - working) replacement for <varname>LimitRSS=</varname>.</para> - - <table> - <title>Limit directives and their equivalent with ulimit</title> - - <tgroup cols='3'> - <colspec colname='directive' /> - <colspec colname='equivalent' /> - <colspec colname='unit' /> - <thead> - <row> - <entry>Directive</entry> - <entry>ulimit equivalent</entry> - <entry>Unit</entry> - </row> - </thead> - <tbody> - <row> - <entry>LimitCPU=</entry> - <entry>ulimit -t</entry> - <entry>Seconds</entry> - </row> - <row> - <entry>LimitFSIZE=</entry> - <entry>ulimit -f</entry> - <entry>Bytes</entry> - </row> - <row> - <entry>LimitDATA=</entry> - <entry>ulimit -d</entry> - <entry>Bytes</entry> - </row> - <row> - <entry>LimitSTACK=</entry> - <entry>ulimit -s</entry> - <entry>Bytes</entry> - </row> - <row> - <entry>LimitCORE=</entry> - <entry>ulimit -c</entry> - <entry>Bytes</entry> - </row> - <row> - <entry>LimitRSS=</entry> - <entry>ulimit -m</entry> - <entry>Bytes</entry> - </row> - <row> - <entry>LimitNOFILE=</entry> - <entry>ulimit -n</entry> - <entry>Number of File Descriptors</entry> - </row> - <row> - <entry>LimitAS=</entry> - <entry>ulimit -v</entry> - <entry>Bytes</entry> - </row> - <row> - <entry>LimitNPROC=</entry> - <entry>ulimit -u</entry> - <entry>Number of Processes</entry> - </row> - <row> - <entry>LimitMEMLOCK=</entry> - <entry>ulimit -l</entry> - <entry>Bytes</entry> - </row> - <row> - <entry>LimitLOCKS=</entry> - <entry>ulimit -x</entry> - <entry>Number of Locks</entry> - </row> - <row> - <entry>LimitSIGPENDING=</entry> - <entry>ulimit -i</entry> - <entry>Number of Queued Signals</entry> - </row> - <row> - <entry>LimitMSGQUEUE=</entry> - <entry>ulimit -q</entry> - <entry>Bytes</entry> - </row> - <row> - <entry>LimitNICE=</entry> - <entry>ulimit -e</entry> - <entry>Nice Level</entry> - </row> - <row> - <entry>LimitRTPRIO=</entry> - <entry>ulimit -r</entry> - <entry>Realtime Priority</entry> - </row> - <row> - <entry>LimitRTTIME=</entry> - <entry>No equivalent</entry> - <entry>Microseconds</entry> - </row> - </tbody> - </tgroup> - </table></listitem> - </varlistentry> - - <varlistentry> - <term><varname>PAMName=</varname></term> - <listitem><para>Sets the PAM service name to set up a session - as. If set, the executed process will be registered as a PAM - session under the specified service name. This is only useful - in conjunction with the <varname>User=</varname> setting. If - not set, no PAM session will be opened for the executed - processes. See - <citerefentry project='man-pages'><refentrytitle>pam</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>CapabilityBoundingSet=</varname></term> - - <listitem><para>Controls which capabilities to include in the capability bounding set for the executed - process. See <citerefentry - project='man-pages'><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry> for - details. Takes a whitespace-separated list of capability names as read by <citerefentry - project='mankier'><refentrytitle>cap_from_name</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - e.g. <constant>CAP_SYS_ADMIN</constant>, <constant>CAP_DAC_OVERRIDE</constant>, - <constant>CAP_SYS_PTRACE</constant>. Capabilities listed will be included in the bounding set, all others are - removed. If the list of capabilities is prefixed with <literal>~</literal>, all but the listed capabilities - will be included, the effect of the assignment inverted. Note that this option also affects the respective - capabilities in the effective, permitted and inheritable capability sets. If this option is not used, the - capability bounding set is not modified on process execution, hence no limits on the capabilities of the - process are enforced. This option may appear more than once, in which case the bounding sets are merged. If the - empty string is assigned to this option, the bounding set is reset to the empty capability set, and all prior - settings have no effect. If set to <literal>~</literal> (without any further argument), the bounding set is - reset to the full set of available capabilities, also undoing any previous settings.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>AmbientCapabilities=</varname></term> - - <listitem><para>Controls which capabilities to include in the - ambient capability set for the executed process. Takes a - whitespace-separated list of capability names as read by - <citerefentry project='mankier'><refentrytitle>cap_from_name</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - e.g. <constant>CAP_SYS_ADMIN</constant>, - <constant>CAP_DAC_OVERRIDE</constant>, - <constant>CAP_SYS_PTRACE</constant>. This option may appear more than - once in which case the ambient capability sets are merged. - If the list of capabilities is prefixed with <literal>~</literal>, all - but the listed capabilities will be included, the effect of the - assignment inverted. If the empty string is - assigned to this option, the ambient capability set is reset to - the empty capability set, and all prior settings have no effect. - If set to <literal>~</literal> (without any further argument), the - ambient capability set is reset to the full set of available - capabilities, also undoing any previous settings. Note that adding - capabilities to ambient capability set adds them to the process's - inherited capability set. - </para><para> - Ambient capability sets are useful if you want to execute a process - as a non-privileged user but still want to give it some capabilities. - Note that in this case option <constant>keep-caps</constant> is - automatically added to <varname>SecureBits=</varname> to retain the - capabilities over the user change.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SecureBits=</varname></term> - <listitem><para>Controls the secure bits set for the executed - process. Takes a space-separated combination of options from - the following list: - <option>keep-caps</option>, - <option>keep-caps-locked</option>, - <option>no-setuid-fixup</option>, - <option>no-setuid-fixup-locked</option>, - <option>noroot</option>, and - <option>noroot-locked</option>. - This option may appear more than once, in which case the secure - bits are ORed. If the empty string is assigned to this option, - the bits are reset to 0. See - <citerefentry project='man-pages'><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ReadWriteDirectories=</varname></term> - <term><varname>ReadOnlyDirectories=</varname></term> - <term><varname>InaccessibleDirectories=</varname></term> - - <listitem><para>Sets up a new file system namespace for - executed processes. These options may be used to limit access - a process might have to the main file system hierarchy. Each - setting takes a space-separated list of absolute directory - paths. Directories listed in - <varname>ReadWriteDirectories=</varname> are accessible from - within the namespace with the same access rights as from - outside. Directories listed in - <varname>ReadOnlyDirectories=</varname> are accessible for - reading only, writing will be refused even if the usual file - access controls would permit this. Directories listed in - <varname>InaccessibleDirectories=</varname> will be made - inaccessible for processes inside the namespace, and may not - countain any other mountpoints, including those specified by - <varname>ReadWriteDirectories=</varname> or - <varname>ReadOnlyDirectories=</varname>. - Note that restricting access with these options does not extend - to submounts of a directory that are created later on. These - options may be specified more than once, in which case all - directories listed will have limited access from within the - namespace. If the empty string is assigned to this option, the - specific list is reset, and all prior assignments have no - effect.</para> - <para>Paths in - <varname>ReadOnlyDirectories=</varname> - and - <varname>InaccessibleDirectories=</varname> - may be prefixed with - <literal>-</literal>, in which case - they will be ignored when they do not - exist. Note that using this - setting will disconnect propagation of - mounts from the service to the host - (propagation in the opposite direction - continues to work). This means that - this setting may not be used for - services which shall be able to - install mount points in the main mount - namespace.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>PrivateTmp=</varname></term> - - <listitem><para>Takes a boolean argument. If true, sets up a - new file system namespace for the executed processes and - mounts private <filename>/tmp</filename> and - <filename>/var/tmp</filename> directories inside it that is - not shared by processes outside of the namespace. This is - useful to secure access to temporary files of the process, but - makes sharing between processes via <filename>/tmp</filename> - or <filename>/var/tmp</filename> impossible. If this is - enabled, all temporary files created by a service in these - directories will be removed after the service is stopped. - Defaults to false. It is possible to run two or more units - within the same private <filename>/tmp</filename> and - <filename>/var/tmp</filename> namespace by using the - <varname>JoinsNamespaceOf=</varname> directive, see - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. Note that using this setting will disconnect - propagation of mounts from the service to the host - (propagation in the opposite direction continues to work). - This means that this setting may not be used for services - which shall be able to install mount points in the main mount - namespace.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>PrivateDevices=</varname></term> - - <listitem><para>Takes a boolean argument. If true, sets up a - new /dev namespace for the executed processes and only adds - API pseudo devices such as <filename>/dev/null</filename>, - <filename>/dev/zero</filename> or - <filename>/dev/random</filename> (as well as the pseudo TTY - subsystem) to it, but no physical devices such as - <filename>/dev/sda</filename>. This is useful to securely turn - off physical device access by the executed process. Defaults - to false. Enabling this option will also remove - <constant>CAP_MKNOD</constant> from the capability bounding - set for the unit (see above), and set - <varname>DevicePolicy=closed</varname> (see - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details). Note that using this setting will disconnect - propagation of mounts from the service to the host - (propagation in the opposite direction continues to work). - This means that this setting may not be used for services - which shall be able to install mount points in the main mount - namespace. The /dev namespace will be mounted read-only and 'noexec'. - The latter may break old programs which try to set up executable - memory by using <citerefentry><refentrytitle>mmap</refentrytitle><manvolnum>2</manvolnum></citerefentry> - of <filename>/dev/zero</filename> instead of using <constant>MAP_ANON</constant>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>PrivateNetwork=</varname></term> - - <listitem><para>Takes a boolean argument. If true, sets up a - new network namespace for the executed processes and - configures only the loopback network device - <literal>lo</literal> inside it. No other network devices will - be available to the executed process. This is useful to - securely turn off network access by the executed process. - Defaults to false. It is possible to run two or more units - within the same private network namespace by using the - <varname>JoinsNamespaceOf=</varname> directive, see - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. Note that this option will disconnect all socket - families from the host, this includes AF_NETLINK and AF_UNIX. - The latter has the effect that AF_UNIX sockets in the abstract - socket namespace will become unavailable to the processes - (however, those located in the file system will continue to be - accessible).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ProtectSystem=</varname></term> - - <listitem><para>Takes a boolean argument or - <literal>full</literal>. If true, mounts the - <filename>/usr</filename> and <filename>/boot</filename> - directories read-only for processes invoked by this unit. If - set to <literal>full</literal>, the <filename>/etc</filename> - directory is mounted read-only, too. This setting ensures that - any modification of the vendor-supplied operating system (and - optionally its configuration) is prohibited for the service. - It is recommended to enable this setting for all long-running - services, unless they are involved with system updates or need - to modify the operating system in other ways. Note however - that processes retaining the CAP_SYS_ADMIN capability can undo - the effect of this setting. This setting is hence particularly - useful for daemons which have this capability removed, for - example with <varname>CapabilityBoundingSet=</varname>. - Defaults to off.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ProtectHome=</varname></term> - - <listitem><para>Takes a boolean argument or - <literal>read-only</literal>. If true, the directories - <filename>/home</filename>, <filename>/root</filename> and - <filename>/run/user</filename> - are made inaccessible and empty for processes invoked by this - unit. If set to <literal>read-only</literal>, the three - directories are made read-only instead. It is recommended to - enable this setting for all long-running services (in - particular network-facing ones), to ensure they cannot get - access to private user data, unless the services actually - require access to the user's private data. Note however that - processes retaining the CAP_SYS_ADMIN capability can undo the - effect of this setting. This setting is hence particularly - useful for daemons which have this capability removed, for - example with <varname>CapabilityBoundingSet=</varname>. - Defaults to off.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>MountFlags=</varname></term> - - <listitem><para>Takes a mount propagation flag: - <option>shared</option>, <option>slave</option> or - <option>private</option>, which control whether mounts in the - file system namespace set up for this unit's processes will - receive or propagate mounts or unmounts. See - <citerefentry project='man-pages'><refentrytitle>mount</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details. Defaults to <option>shared</option>. Use - <option>shared</option> to ensure that mounts and unmounts are - propagated from the host to the container and vice versa. Use - <option>slave</option> to run processes so that none of their - mounts and unmounts will propagate to the host. Use - <option>private</option> to also ensure that no mounts and - unmounts from the host will propagate into the unit processes' - namespace. Note that <option>slave</option> means that file - systems mounted on the host might stay mounted continuously in - the unit's namespace, and thus keep the device busy. Note that - the file system namespace related options - (<varname>PrivateTmp=</varname>, - <varname>PrivateDevices=</varname>, - <varname>ProtectSystem=</varname>, - <varname>ProtectHome=</varname>, - <varname>ReadOnlyDirectories=</varname>, - <varname>InaccessibleDirectories=</varname> and - <varname>ReadWriteDirectories=</varname>) require that mount - and unmount propagation from the unit's file system namespace - is disabled, and hence downgrade <option>shared</option> to - <option>slave</option>. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>UtmpIdentifier=</varname></term> - - <listitem><para>Takes a four character identifier string for - an <citerefentry - project='man-pages'><refentrytitle>utmp</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and wtmp entry for this service. This should only be - set for services such as <command>getty</command> - implementations (such as <citerefentry - project='die-net'><refentrytitle>agetty</refentrytitle><manvolnum>8</manvolnum></citerefentry>) - where utmp/wtmp entries must be created and cleared before and - after execution, or for services that shall be executed as if - they were run by a <command>getty</command> process (see - below). If the configured string is longer than four - characters, it is truncated and the terminal four characters - are used. This setting interprets %I style string - replacements. This setting is unset by default, i.e. no - utmp/wtmp entries are created or cleaned up for this - service.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>UtmpMode=</varname></term> - - <listitem><para>Takes one of <literal>init</literal>, - <literal>login</literal> or <literal>user</literal>. If - <varname>UtmpIdentifier=</varname> is set, controls which - type of <citerefentry - project='man-pages'><refentrytitle>utmp</refentrytitle><manvolnum>5</manvolnum></citerefentry>/wtmp - entries for this service are generated. This setting has no - effect unless <varname>UtmpIdentifier=</varname> is set - too. If <literal>init</literal> is set, only an - <constant>INIT_PROCESS</constant> entry is generated and the - invoked process must implement a - <command>getty</command>-compatible utmp/wtmp logic. If - <literal>login</literal> is set, first an - <constant>INIT_PROCESS</constant> entry, followed by a - <constant>LOGIN_PROCESS</constant> entry is generated. In - this case, the invoked process must implement a <citerefentry - project='die-net'><refentrytitle>login</refentrytitle><manvolnum>1</manvolnum></citerefentry>-compatible - utmp/wtmp logic. If <literal>user</literal> is set, first an - <constant>INIT_PROCESS</constant> entry, then a - <constant>LOGIN_PROCESS</constant> entry and finally a - <constant>USER_PROCESS</constant> entry is generated. In this - case, the invoked process may be any process that is suitable - to be run as session leader. Defaults to - <literal>init</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SELinuxContext=</varname></term> - - <listitem><para>Set the SELinux security context of the - executed process. If set, this will override the automated - domain transition. However, the policy still needs to - authorize the transition. This directive is ignored if SELinux - is disabled. If prefixed by <literal>-</literal>, all errors - will be ignored. See - <citerefentry project='die-net'><refentrytitle>setexeccon</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>AppArmorProfile=</varname></term> - - <listitem><para>Takes a profile name as argument. The process - executed by the unit will switch to this profile when started. - Profiles must already be loaded in the kernel, or the unit - will fail. This result in a non operation if AppArmor is not - enabled. If prefixed by <literal>-</literal>, all errors will - be ignored. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SmackProcessLabel=</varname></term> - - <listitem><para>Takes a <option>SMACK64</option> security - label as argument. The process executed by the unit will be - started under this label and SMACK will decide whether the - process is allowed to run or not, based on it. The process - will continue to run under the label specified here unless the - executable has its own <option>SMACK64EXEC</option> label, in - which case the process will transition to run under that - label. When not specified, the label that systemd is running - under is used. This directive is ignored if SMACK is - disabled.</para> - - <para>The value may be prefixed by <literal>-</literal>, in - which case all errors will be ignored. An empty value may be - specified to unset previous assignments.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>IgnoreSIGPIPE=</varname></term> - - <listitem><para>Takes a boolean argument. If true, causes - <constant>SIGPIPE</constant> to be ignored in the executed - process. Defaults to true because <constant>SIGPIPE</constant> - generally is useful only in shell pipelines.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>NoNewPrivileges=</varname></term> - - <listitem><para>Takes a boolean argument. If true, ensures - that the service process and all its children can never gain - new privileges. This option is more powerful than the - respective secure bits flags (see above), as it also prohibits - UID changes of any kind. This is the simplest, most effective - way to ensure that a process and its children can never - elevate privileges again.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SystemCallFilter=</varname></term> - - <listitem><para>Takes a space-separated list of system call - names. If this setting is used, all system calls executed by - the unit processes except for the listed ones will result in - immediate process termination with the - <constant>SIGSYS</constant> signal (whitelisting). If the - first character of the list is <literal>~</literal>, the - effect is inverted: only the listed system calls will result - in immediate process termination (blacklisting). If running in - user mode, or in system mode, but without the - <constant>CAP_SYS_ADMIN</constant> capabiblity (e.g. setting - <varname>User=nobody</varname>), - <varname>NoNewPrivileges=yes</varname> is implied. This - feature makes use of the Secure Computing Mode 2 interfaces of - the kernel ('seccomp filtering') and is useful for enforcing a - minimal sandboxing environment. Note that the - <function>execve</function>, - <function>rt_sigreturn</function>, - <function>sigreturn</function>, - <function>exit_group</function>, <function>exit</function> - system calls are implicitly whitelisted and do not need to be - listed explicitly. This option may be specified more than once, - in which case the filter masks are merged. If the empty string - is assigned, the filter is reset, all prior assignments will - have no effect.</para> - - <para>If you specify both types of this option (i.e. - whitelisting and blacklisting), the first encountered will - take precedence and will dictate the default action - (termination or approval of a system call). Then the next - occurrences of this option will add or delete the listed - system calls from the set of the filtered system calls, - depending of its type and the default action. (For example, if - you have started with a whitelisting of - <function>read</function> and <function>write</function>, and - right after it add a blacklisting of - <function>write</function>, then <function>write</function> - will be removed from the set.) </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SystemCallErrorNumber=</varname></term> - - <listitem><para>Takes an <literal>errno</literal> error number - name to return when the system call filter configured with - <varname>SystemCallFilter=</varname> is triggered, instead of - terminating the process immediately. Takes an error name such - as <constant>EPERM</constant>, <constant>EACCES</constant> or - <constant>EUCLEAN</constant>. When this setting is not used, - or when the empty string is assigned, the process will be - terminated immediately when the filter is - triggered.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SystemCallArchitectures=</varname></term> - - <listitem><para>Takes a space-separated list of architecture - identifiers to include in the system call filter. The known - architecture identifiers are <constant>x86</constant>, - <constant>x86-64</constant>, <constant>x32</constant>, - <constant>arm</constant> as well as the special identifier - <constant>native</constant>. Only system calls of the - specified architectures will be permitted to processes of this - unit. This is an effective way to disable compatibility with - non-native architectures for processes, for example to - prohibit execution of 32-bit x86 binaries on 64-bit x86-64 - systems. The special <constant>native</constant> identifier - implicitly maps to the native architecture of the system (or - more strictly: to the architecture the system manager is - compiled for). If running in user mode, or in system mode, - but without the <constant>CAP_SYS_ADMIN</constant> - capabiblity (e.g. setting <varname>User=nobody</varname>), - <varname>NoNewPrivileges=yes</varname> is implied. Note - that setting this option to a non-empty list implies that - <constant>native</constant> is included too. By default, this - option is set to the empty list, i.e. no architecture system - call filtering is applied.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RestrictAddressFamilies=</varname></term> - - <listitem><para>Restricts the set of socket address families - accessible to the processes of this unit. Takes a - space-separated list of address family names to whitelist, - such as - <constant>AF_UNIX</constant>, - <constant>AF_INET</constant> or - <constant>AF_INET6</constant>. When - prefixed with <constant>~</constant> the listed address - families will be applied as blacklist, otherwise as whitelist. - Note that this restricts access to the - <citerefentry project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>2</manvolnum></citerefentry> - system call only. Sockets passed into the process by other - means (for example, by using socket activation with socket - units, see - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>) - are unaffected. Also, sockets created with - <function>socketpair()</function> (which creates connected - AF_UNIX sockets only) are unaffected. Note that this option - has no effect on 32-bit x86 and is ignored (but works - correctly on x86-64). If running in user mode, or in system - mode, but without the <constant>CAP_SYS_ADMIN</constant> - capabiblity (e.g. setting <varname>User=nobody</varname>), - <varname>NoNewPrivileges=yes</varname> is implied. By - default, no restriction applies, all address families are - accessible to processes. If assigned the empty string, any - previous list changes are undone.</para> - - <para>Use this option to limit exposure of processes to remote - systems, in particular via exotic network protocols. Note that - in most cases, the local <constant>AF_UNIX</constant> address - family should be included in the configured whitelist as it is - frequently used for local communication, including for - <citerefentry><refentrytitle>syslog</refentrytitle><manvolnum>2</manvolnum></citerefentry> - logging.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Personality=</varname></term> - - <listitem><para>Controls which kernel architecture <citerefentry - project='man-pages'><refentrytitle>uname</refentrytitle><manvolnum>2</manvolnum></citerefentry> shall report, - when invoked by unit processes. Takes one of the architecture identifiers <constant>x86</constant>, - <constant>x86-64</constant>, <constant>ppc</constant>, <constant>ppc-le</constant>, <constant>ppc64</constant>, - <constant>ppc64-le</constant>, <constant>s390</constant> or <constant>s390x</constant>. Which personality - architectures are supported depends on the system architecture. Usually the 64bit versions of the various - system architectures support their immediate 32bit personality architecture counterpart, but no others. For - example, <constant>x86-64</constant> systems support the <constant>x86-64</constant> and - <constant>x86</constant> personalities but no others. The personality feature is useful when running 32-bit - services on a 64-bit host system. If not specified, the personality is left unmodified and thus reflects the - personality of the host system's kernel.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RuntimeDirectory=</varname></term> - <term><varname>RuntimeDirectoryMode=</varname></term> - - <listitem><para>Takes a list of directory names. If set, one - or more directories by the specified names will be created - below <filename>/run</filename> (for system services) or below - <varname>$XDG_RUNTIME_DIR</varname> (for user services) when - the unit is started, and removed when the unit is stopped. The - directories will have the access mode specified in - <varname>RuntimeDirectoryMode=</varname>, and will be owned by - the user and group specified in <varname>User=</varname> and - <varname>Group=</varname>. Use this to manage one or more - runtime directories of the unit and bind their lifetime to the - daemon runtime. The specified directory names must be - relative, and may not include a <literal>/</literal>, i.e. - must refer to simple directories to create or remove. This is - particularly useful for unprivileged daemons that cannot - create runtime directories in <filename>/run</filename> due to - lack of privileges, and to make sure the runtime directory is - cleaned up automatically after use. For runtime directories - that require more complex or different configuration or - lifetime guarantees, please consider using - <citerefentry><refentrytitle>tmpfiles.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>Environment variables in spawned processes</title> - - <para>Processes started by the system are executed in a clean - environment in which select variables listed below are set. System - processes started by systemd do not inherit variables from PID 1, - but processes started by user systemd instances inherit all - environment variables from the user systemd instance. - </para> - - <variablelist class='environment-variables'> - <varlistentry> - <term><varname>$PATH</varname></term> - - <listitem><para>Colon-separated list of directories to use - when launching executables. Systemd uses a fixed value of - <filename>/usr/local/sbin</filename>:<filename>/usr/local/bin</filename>:<filename>/usr/sbin</filename>:<filename>/usr/bin</filename>:<filename>/sbin</filename>:<filename>/bin</filename>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$LANG</varname></term> - - <listitem><para>Locale. Can be set in - <citerefentry project='man-pages'><refentrytitle>locale.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - or on the kernel command line (see - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>kernel-command-line</refentrytitle><manvolnum>7</manvolnum></citerefentry>). - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$USER</varname></term> - <term><varname>$LOGNAME</varname></term> - <term><varname>$HOME</varname></term> - <term><varname>$SHELL</varname></term> - - <listitem><para>User name (twice), home directory, and the - login shell. The variables are set for the units that have - <varname>User=</varname> set, which includes user - <command>systemd</command> instances. See - <citerefentry project='die-net'><refentrytitle>passwd</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$XDG_RUNTIME_DIR</varname></term> - - <listitem><para>The directory for volatile state. Set for the - user <command>systemd</command> instance, and also in user - sessions. See - <citerefentry><refentrytitle>pam_systemd</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$XDG_SESSION_ID</varname></term> - <term><varname>$XDG_SEAT</varname></term> - <term><varname>$XDG_VTNR</varname></term> - - <listitem><para>The identifier of the session, the seat name, - and virtual terminal of the session. Set by - <citerefentry><refentrytitle>pam_systemd</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for login sessions. <varname>$XDG_SEAT</varname> and - <varname>$XDG_VTNR</varname> will only be set when attached to - a seat and a tty.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$MAINPID</varname></term> - - <listitem><para>The PID of the units main process if it is - known. This is only set for control processes as invoked by - <varname>ExecReload=</varname> and similar. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$MANAGERPID</varname></term> - - <listitem><para>The PID of the user <command>systemd</command> - instance, set for processes spawned by it. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$LISTEN_FDS</varname></term> - <term><varname>$LISTEN_PID</varname></term> - <term><varname>$LISTEN_FDNAMES</varname></term> - - <listitem><para>Information about file descriptors passed to a - service for socket activation. See - <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$NOTIFY_SOCKET</varname></term> - - <listitem><para>The socket - <function>sd_notify()</function> talks to. See - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$WATCHDOG_PID</varname></term> - <term><varname>$WATCHDOG_USEC</varname></term> - - <listitem><para>Information about watchdog keep-alive notifications. See - <citerefentry><refentrytitle>sd_watchdog_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$TERM</varname></term> - - <listitem><para>Terminal type, set only for units connected to - a terminal (<varname>StandardInput=tty</varname>, - <varname>StandardOutput=tty</varname>, or - <varname>StandardError=tty</varname>). See - <citerefentry project='man-pages'><refentrytitle>termcap</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - </variablelist> - - <para>Additional variables may be configured by the following - means: for processes spawned in specific units, use the - <varname>Environment=</varname>, <varname>EnvironmentFile=</varname> - and <varname>PassEnvironment=</varname> options above; to specify - variables globally, use <varname>DefaultEnvironment=</varname> - (see - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>) - or the kernel option <varname>systemd.setenv=</varname> (see - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>). - Additional variables may also be set through PAM, - cf. <citerefentry project='man-pages'><refentrytitle>pam_env</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>tmpfiles.d</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>exec</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.generator.xml b/man/systemd.generator.xml deleted file mode 100644 index 4b80dab108..0000000000 --- a/man/systemd.generator.xml +++ /dev/null @@ -1,348 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ -<!ENTITY % entities SYSTEM "custom-entities.ent" > -%entities; -]> - -<!-- - This file is part of systemd. - - Copyright 2015 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.generator"> - <refentryinfo> - <title>systemd.generator</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.generator</refentrytitle> - <manvolnum>7</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.generator</refname> - <refpurpose>Systemd unit generators</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>/path/to/generator</command> - <arg choice="plain"><replaceable>normal-dir</replaceable></arg> - <arg choice="plain"><replaceable>early-dir</replaceable></arg> - <arg choice="plain"><replaceable>late-dir</replaceable></arg> - </cmdsynopsis> - - <para> - <literallayout><filename>/run/systemd/system-generators/*</filename> -<filename>/etc/systemd/system-generators/*</filename> -<filename>/usr/local/lib/systemd/system-generators/*</filename> -<filename>&systemgeneratordir;/*</filename></literallayout> - </para> - - <para> - <literallayout><filename>/run/systemd/user-generators/*</filename> -<filename>/etc/systemd/user-generators/*</filename> -<filename>/usr/local/lib/systemd/user-generators/*</filename> -<filename>&usergeneratordir;/*</filename></literallayout> - </para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - <para>Generators are small binaries that live in - <filename>&usergeneratordir;/</filename> and other directories - listed above. - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> - will execute those binaries very early at bootup and at - configuration reload time — before unit files are loaded. - Generators can dynamically generate unit files or create symbolic - links to unit files to add additional dependencies, thus extending - or overriding existing definitions. Their main purpose is to - convert configuration files that are not native unit files - dynamically into native unit files.</para> - - <para>Generators are loaded from a set of paths determined during - compilation, as listed above. System and user generators are loaded - from directories with names ending in - <filename>system-generators/</filename> and - <filename>user-generators/</filename>, respectively. Generators - found in directories listed earlier override the ones with the - same name in directories lower in the list. A symlink to - <filename>/dev/null</filename> or an empty file can be used to - mask a generator, thereby preventing it from running. Please note - that the order of the two directories with the highest priority is - reversed with respect to the unit load path, and generators in - <filename>/run</filename> overwrite those in - <filename>/etc</filename>.</para> - - <para>After installing new generators or updating the - configuration, <command>systemctl daemon-reload</command> may be - executed. This will delete the previous configuration created by - generators, re-run all generators, and cause - <command>systemd</command> to reload units from disk. See - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - for more information. - </para> - </refsect1> - - <refsect1> - <title>Writing generators</title> - - <para>Generators are invoked with three arguments: paths to - runtime directories where generators can place their generated - unit files or symlinks.</para> - - <orderedlist> - <listitem> - <para><parameter>normal-dir</parameter></para> - <para>argv[1] may be used to override unit files in - <filename>/usr</filename>, but not those in - <filename>/etc</filename>. This means that unit files placed - in this directory take precedence over vendor unit - configuration but not over native user/administrator unit - configuration.</para> - </listitem> - - <listitem> - <para><parameter>early-dir</parameter></para> - <para>argv[2] may be used to override unit files in - <filename>/usr</filename> and in - <filename>/etc</filename>. This means that unit files placed - in this directory take precedence over all configuration, - both vendor and user/administrator.</para> - </listitem> - - <listitem> - <para><parameter>late-dir</parameter></para> - <para>argv[3] may be used to extend the unit file tree without - overriding any other unit files. Any native configuration - files supplied by the vendor or user/administrator take - precedence over the generated ones placed in this directory. - </para> - </listitem> - </orderedlist> - - <refsect2> - <title>Notes</title> - - <itemizedlist> - <listitem> - <para> - All generators are executed in parallel. That means all - executables are started at the very same time and need to - be able to cope with this parallelism. - </para> - </listitem> - - <listitem> - <para> - Generators are run very early at boot and cannot rely on - any external services. They may not talk to any other - process. That includes simple things such as logging to - <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - or <command>systemd</command> itself (this means: no - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>)!. - Non-essential file systems like - <filename>/var</filename> and <filename>/home</filename> - are mounted after generators have run. Generators - can however rely on the most basic kernel functionality to be - available, including a mounted <filename>/sys</filename>, - <filename>/proc</filename>, <filename>/dev</filename>, - <filename>/usr</filename>. - </para> - </listitem> - - <listitem> - <para> - Units written by generators are removed when the configuration - is reloaded. That means the lifetime of the generated - units is closely bound to the reload cycles of - <command>systemd</command> itself. - </para> - </listitem> - - <listitem> - <para> - Generators should only be used to generate unit files, not - any other kind of configuration. Due to the lifecycle - logic mentioned above, generators are not a good fit to - generate dynamic configuration for other services. If you - need to generate dynamic configuration for other services, - do so in normal services you order before the service in - question. - </para> - </listitem> - - <listitem> - <para> - Since - <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry> - is not available (see above), log messages have to be - written to <filename>/dev/kmsg</filename> instead. - </para> - </listitem> - - <listitem> - <para> - It is a good idea to use the - <varname>SourcePath=</varname> directive in generated unit - files to specify the source configuration file you are - generating the unit from. This makes things more easily - understood by the user and also has the benefit that - systemd can warn the user about configuration files that - changed on disk but have not been read yet by systemd. - </para> - </listitem> - - <listitem> - <para> - Generators may write out dynamic unit files or just hook - unit files into other units with the usual - <filename>.wants/</filename> or - <filename>.requires/</filename> symlinks. Often, it is - nicer to simply instantiate a template unit file from - <filename>/usr</filename> with a generator instead of - writing out entirely dynamic unit files. Of course, this - works only if a single parameter is to be used. - </para> - </listitem> - - <listitem> - <para> - If you are careful, you can implement generators in shell - scripts. We do recommend C code however, since generators - are executed synchronously and hence delay the - entire boot if they are slow. - </para> - </listitem> - - <listitem> - <para>Regarding overriding semantics: there are two rules we - try to follow when thinking about the overriding semantics: - </para> - - <orderedlist numeration="lowerroman"> - <listitem> - <para>User configuration should override vendor - configuration. This (mostly) means that stuff from - <filename>/etc</filename> should override stuff from - <filename>/usr</filename>.</para> - </listitem> - - <listitem> - <para>Native configuration should override non-native - configuration. This (mostly) means that stuff you - generate should never override native unit files for the - same purpose.</para> - </listitem> - </orderedlist> - - <para>Of these two rules the first rule is probably the more - important one and breaks the second one sometimes. Hence, - when deciding whether to user argv[1], argv[2], or argv[3], - your default choice should probably be argv[1].</para> - </listitem> - - <listitem> - <para> - Instead of heading off now and writing all kind of - generators for legacy configuration file formats, please - think twice! It is often a better idea to just deprecate - old stuff instead of keeping it artificially alive. - </para> - </listitem> - </itemizedlist> - </refsect2> - </refsect1> - - <refsect1> - <title>Examples</title> - <example> - <title>systemd-fstab-generator</title> - - <para><citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry> - converts <filename>/etc/fstab</filename> into native mount - units. It uses argv[1] as location to place the generated unit - files in order to allow the user to override - <filename>/etc/fstab</filename> with her own native unit files, - but also to ensure that <filename>/etc/fstab</filename> - overrides any vendor default from <filename>/usr</filename>. - </para> - - <para>After editing <filename>/etc/fstab</filename>, the user - should invoke <command>systemctl daemon-reload</command>. This - will re-run all generators and cause <command>systemd</command> - to reload units from disk. To actually mount new directories - added to <filename>fstab</filename>, <command>systemctl start - <replaceable>/path/to/mountpoint</replaceable></command> or - <command>systemctl start local-fs.target</command> may be used. - </para> - </example> - - <example> - <title>systemd-system-update-generator</title> - - <para><citerefentry><refentrytitle>systemd-system-update-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry> - temporarily redirects <filename>default.target</filename> to - <filename>system-update.target</filename> if a system update is - scheduled. Since this needs to override the default user - configuration for <filename>default.target</filename>, it uses - argv[2]. For details about this logic, see - <ulink url="http://www.freedesktop.org/wiki/Software/systemd/SystemUpdates">Implementing - Offline System Updates</ulink>.</para> - </example> - - <example> - <title>Debugging a generator</title> - - <programlisting>dir=$(mktemp -d) -SYSTEMD_LOG_LEVEL=debug &systemgeneratordir;/systemd-fstab-generator \ - "$dir" "$dir" "$dir" -find $dir</programlisting> - </example> - </refsect1> - - <refsect1> - <title>See also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-cryptsetup-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-debug-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>fstab</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-getty-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-gpt-auto-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-hibernate-resume-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-system-update-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-sysv-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> -</refentry> diff --git a/man/systemd.journal-fields.xml b/man/systemd.journal-fields.xml deleted file mode 100644 index 494f97aad1..0000000000 --- a/man/systemd.journal-fields.xml +++ /dev/null @@ -1,525 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.journal-fields"> - - <refentryinfo> - <title>systemd.journal-fields</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.journal-fields</refentrytitle> - <manvolnum>7</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.journal-fields</refname> - <refpurpose>Special journal fields</refpurpose> - </refnamediv> - - <refsect1> - <title>Description</title> - - <para>Entries in the journal resemble an environment block in - their syntax but with fields that can include binary data. - Primarily, fields are formatted UTF-8 text strings, and binary - formatting is used only where formatting as UTF-8 text strings - makes little sense. New fields may freely be defined by - applications, but a few fields have special meaning. All fields - with special meanings are optional. In some cases, fields may - appear more than once per entry.</para> - </refsect1> - - <refsect1> - <title>User Journal Fields</title> - - <para>User fields are fields that are directly passed from clients - and stored in the journal.</para> - - <variablelist class='journal-directives'> - <varlistentry> - <term><varname>MESSAGE=</varname></term> - <listitem> - <para>The human-readable message string for this entry. This - is supposed to be the primary text shown to the user. It is - usually not translated (but might be in some cases), and is - not supposed to be parsed for metadata.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>MESSAGE_ID=</varname></term> - <listitem> - <para>A 128-bit message identifier ID for recognizing - certain message types, if this is desirable. This should - contain a 128-bit ID formatted as a lower-case hexadecimal - string, without any separating dashes or suchlike. This is - recommended to be a UUID-compatible ID, but this is not - enforced, and formatted differently. Developers can generate - a new ID for this purpose with <command>journalctl - <option>--new-id</option></command>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>PRIORITY=</varname></term> - <listitem> - <para>A priority value between 0 (<literal>emerg</literal>) - and 7 (<literal>debug</literal>) formatted as a decimal - string. This field is compatible with syslog's priority - concept.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>CODE_FILE=</varname></term> - <term><varname>CODE_LINE=</varname></term> - <term><varname>CODE_FUNC=</varname></term> - <listitem> - <para>The code location generating this message, if known. - Contains the source filename, the line number and the - function name.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>ERRNO=</varname></term> - <listitem> - <para>The low-level Unix error number causing this entry, if - any. Contains the numeric value of - <citerefentry project='man-pages'><refentrytitle>errno</refentrytitle><manvolnum>3</manvolnum></citerefentry> - formatted as a decimal string.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>SYSLOG_FACILITY=</varname></term> - <term><varname>SYSLOG_IDENTIFIER=</varname></term> - <term><varname>SYSLOG_PID=</varname></term> - <listitem> - <para>Syslog compatibility fields containing the facility - (formatted as decimal string), the identifier string (i.e. - "tag"), and the client PID. (Note that the tag is usually - derived from glibc's - <varname>program_invocation_short_name</varname> variable, - see - <citerefentry project='die-net'><refentrytitle>program_invocation_short_name</refentrytitle><manvolnum>3</manvolnum></citerefentry>.)</para> - </listitem> - - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Trusted Journal Fields</title> - - <para>Fields prefixed with an underscore are trusted fields, i.e. - fields that are implicitly added by the journal and cannot be - altered by client code.</para> - - <variablelist class='journal-directives'> - <varlistentry> - <term><varname>_PID=</varname></term> - <term><varname>_UID=</varname></term> - <term><varname>_GID=</varname></term> - <listitem> - <para>The process, user, and group ID of the process the - journal entry originates from formatted as a decimal - string.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>_COMM=</varname></term> - <term><varname>_EXE=</varname></term> - <term><varname>_CMDLINE=</varname></term> - <listitem> - <para>The name, the executable path, and the command line of - the process the journal entry originates from.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>_CAP_EFFECTIVE=</varname></term> - <listitem> - <para>The effective - <citerefentry project='man-pages'><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry> - of the process the journal entry originates from.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>_AUDIT_SESSION=</varname></term> - <term><varname>_AUDIT_LOGINUID=</varname></term> - <listitem> - <para>The session and login UID of the process the journal - entry originates from, as maintained by the kernel audit - subsystem.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>_SYSTEMD_CGROUP=</varname></term> - <term><varname>_SYSTEMD_SESSION=</varname></term> - <term><varname>_SYSTEMD_UNIT=</varname></term> - <term><varname>_SYSTEMD_USER_UNIT=</varname></term> - <term><varname>_SYSTEMD_OWNER_UID=</varname></term> - <term><varname>_SYSTEMD_SLICE=</varname></term> - - <listitem> - <para>The control group path in the systemd hierarchy, the - systemd session ID (if any), the systemd unit name (if any), - the systemd user session unit name (if any), the owner UID - of the systemd session (if any) and the systemd slice unit - of the process the journal entry originates from.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>_SELINUX_CONTEXT=</varname></term> - <listitem> - <para>The SELinux security context (label) of the process - the journal entry originates from.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>_SOURCE_REALTIME_TIMESTAMP=</varname></term> - <listitem> - <para>The earliest trusted timestamp of the message, if any - is known that is different from the reception time of the - journal. This is the time in microseconds since the epoch - UTC, formatted as a decimal string.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>_BOOT_ID=</varname></term> - <listitem> - <para>The kernel boot ID for the boot the message was - generated in, formatted as a 128-bit hexadecimal - string.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>_MACHINE_ID=</varname></term> - <listitem> - <para>The machine ID of the originating host, as available - in - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>_HOSTNAME=</varname></term> - <listitem> - <para>The name of the originating host.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>_TRANSPORT=</varname></term> - <listitem> - <para>How the entry was received by the journal service. - Valid transports are: - </para> - <variablelist> - <varlistentry> - <term> - <option>audit</option> - </term> - <listitem> - <para>for those read from the kernel audit subsystem - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term> - <option>driver</option> - </term> - <listitem> - <para>for internally generated messages - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term> - <option>syslog</option> - </term> - <listitem> - <para>for those received via the local syslog socket - with the syslog protocol - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term> - <option>journal</option> - </term> - <listitem> - <para>for those received via the native journal - protocol - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term> - <option>stdout</option> - </term> - <listitem> - <para>for those read from a service's standard output - or error output - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term> - <option>kernel</option> - </term> - <listitem> - <para>for those read from the kernel - </para> - </listitem> - </varlistentry> - </variablelist> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Kernel Journal Fields</title> - - <para>Kernel fields are fields that are used by messages - originating in the kernel and stored in the journal.</para> - - <variablelist class='journal-directives'> - <varlistentry> - <term><varname>_KERNEL_DEVICE=</varname></term> - <listitem> - <para>The kernel device name. If the entry is associated to - a block device, the major and minor of the device node, - separated by <literal>:</literal> and prefixed by - <literal>b</literal>. Similar for character devices but - prefixed by <literal>c</literal>. For network devices, this - is the interface index prefixed by <literal>n</literal>. For - all other devices, this is the subsystem name prefixed by - <literal>+</literal>, followed by <literal>:</literal>, - followed by the kernel device name.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>_KERNEL_SUBSYSTEM=</varname></term> - <listitem> - <para>The kernel subsystem name.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>_UDEV_SYSNAME=</varname></term> - <listitem> - <para>The kernel device name as it shows up in the device - tree below <filename>/sys</filename>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>_UDEV_DEVNODE=</varname></term> - <listitem> - <para>The device node path of this device in - <filename>/dev</filename>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>_UDEV_DEVLINK=</varname></term> - <listitem> - <para>Additional symlink names pointing to the device node - in <filename>/dev</filename>. This field is frequently set - more than once per entry.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Fields to log on behalf of a different program</title> - - <para>Fields in this section are used by programs to specify that - they are logging on behalf of another program or unit. - </para> - - <para>Fields used by the <command>systemd-coredump</command> - coredump kernel helper: - </para> - - <variablelist class='journal-directives'> - <varlistentry> - <term><varname>COREDUMP_UNIT=</varname></term> - <term><varname>COREDUMP_USER_UNIT=</varname></term> - <listitem> - <para>Used to annotate messages containing coredumps from - system and session units. See - <citerefentry><refentrytitle>coredumpctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - </para> - </listitem> - </varlistentry> - </variablelist> - - <para>Privileged programs (currently UID 0) may attach - <varname>OBJECT_PID=</varname> to a message. This will instruct - <command>systemd-journald</command> to attach additional fields on - behalf of the caller:</para> - - <variablelist class='journal-directives'> - <varlistentry> - <term><varname>OBJECT_PID=<replaceable>PID</replaceable></varname></term> - <listitem> - <para>PID of the program that this message pertains to. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>OBJECT_UID=</varname></term> - <term><varname>OBJECT_GID=</varname></term> - <term><varname>OBJECT_COMM=</varname></term> - <term><varname>OBJECT_EXE=</varname></term> - <term><varname>OBJECT_CMDLINE=</varname></term> - <term><varname>OBJECT_AUDIT_SESSION=</varname></term> - <term><varname>OBJECT_AUDIT_LOGINUID=</varname></term> - <term><varname>OBJECT_SYSTEMD_CGROUP=</varname></term> - <term><varname>OBJECT_SYSTEMD_SESSION=</varname></term> - <term><varname>OBJECT_SYSTEMD_OWNER_UID=</varname></term> - <term><varname>OBJECT_SYSTEMD_UNIT=</varname></term> - <term><varname>OBJECT_SYSTEMD_USER_UNIT=</varname></term> - <listitem> - <para>These are additional fields added automatically by - <command>systemd-journald</command>. Their meaning is the - same as - <varname>_UID=</varname>, - <varname>_GID=</varname>, - <varname>_COMM=</varname>, - <varname>_EXE=</varname>, - <varname>_CMDLINE=</varname>, - <varname>_AUDIT_SESSION=</varname>, - <varname>_AUDIT_LOGINUID=</varname>, - <varname>_SYSTEMD_CGROUP=</varname>, - <varname>_SYSTEMD_SESSION=</varname>, - <varname>_SYSTEMD_UNIT=</varname>, - <varname>_SYSTEMD_USER_UNIT=</varname>, and - <varname>_SYSTEMD_OWNER_UID=</varname> - as described above, except that the process identified by - <replaceable>PID</replaceable> is described, instead of the - process which logged the message.</para> - </listitem> - </varlistentry> - </variablelist> - - </refsect1> - - <refsect1> - <title>Address Fields</title> - - <para>During serialization into external formats, such as the - <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/export">Journal - Export Format</ulink> or the <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/json">Journal - JSON Format</ulink>, the addresses of journal entries are - serialized into fields prefixed with double underscores. Note that - these are not proper fields when stored in the journal but for - addressing metadata of entries. They cannot be written as part of - structured log entries via calls such as - <citerefentry><refentrytitle>sd_journal_send</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - They may also not be used as matches for - <citerefentry><refentrytitle>sd_journal_add_match</refentrytitle><manvolnum>3</manvolnum></citerefentry></para> - - <variablelist class='journal-directives'> - <varlistentry> - <term><varname>__CURSOR=</varname></term> - <listitem> - <para>The cursor for the entry. A cursor is an opaque text - string that uniquely describes the position of an entry in - the journal and is portable across machines, platforms and - journal files. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>__REALTIME_TIMESTAMP=</varname></term> - <listitem> - <para>The wallclock time - (<constant>CLOCK_REALTIME</constant>) at the point in time - the entry was received by the journal, in microseconds since - the epoch UTC, formatted as a decimal string. This has - different properties from - <literal>_SOURCE_REALTIME_TIMESTAMP=</literal>, as it is - usually a bit later but more likely to be monotonic. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>__MONOTONIC_TIMESTAMP=</varname></term> - <listitem> - <para>The monotonic time - (<constant>CLOCK_MONOTONIC</constant>) at the point in time - the entry was received by the journal in microseconds, - formatted as a decimal string. To be useful as an address - for the entry, this should be combined with the boot ID in - <literal>_BOOT_ID=</literal>. - </para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>journald.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-journal</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>coredumpctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.kill.xml b/man/systemd.kill.xml deleted file mode 100644 index 13b7ab14df..0000000000 --- a/man/systemd.kill.xml +++ /dev/null @@ -1,189 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.kill"> - <refentryinfo> - <title>systemd.kill</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.kill</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.kill</refname> - <refpurpose>Process killing procedure - configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>service</replaceable>.service</filename>, - <filename><replaceable>socket</replaceable>.socket</filename>, - <filename><replaceable>mount</replaceable>.mount</filename>, - <filename><replaceable>swap</replaceable>.swap</filename>, - <filename><replaceable>scope</replaceable>.scope</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>Unit configuration files for services, sockets, mount - points, swap devices and scopes share a subset of configuration - options which define the killing procedure of processes belonging - to the unit.</para> - - <para>This man page lists the configuration options shared by - these five unit types. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for the common options shared by all unit configuration files, and - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information on the configuration file options specific to - each unit type.</para> - - <para>The kill procedure configuration options are configured in - the [Service], [Socket], [Mount] or [Swap] section, depending on - the unit type.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <variablelist class='unit-directives'> - - <varlistentry> - <term><varname>KillMode=</varname></term> - <listitem><para>Specifies how processes of this unit shall be - killed. One of - <option>control-group</option>, - <option>process</option>, - <option>mixed</option>, - <option>none</option>.</para> - - <para>If set to <option>control-group</option>, all remaining - processes in the control group of this unit will be killed on - unit stop (for services: after the stop command is executed, - as configured with <varname>ExecStop=</varname>). If set to - <option>process</option>, only the main process itself is - killed. If set to <option>mixed</option>, the - <constant>SIGTERM</constant> signal (see below) is sent to the - main process while the subsequent <constant>SIGKILL</constant> - signal (see below) is sent to all remaining processes of the - unit's control group. If set to <option>none</option>, no - process is killed. In this case, only the stop command will be - executed on unit stop, but no process be killed otherwise. - Processes remaining alive after stop are left in their control - group and the control group continues to exist after stop - unless it is empty.</para> - - <para>Processes will first be terminated via - <constant>SIGTERM</constant> (unless the signal to send is - changed via <varname>KillSignal=</varname>). Optionally, this - is immediately followed by a <constant>SIGHUP</constant> (if - enabled with <varname>SendSIGHUP=</varname>). If then, after a - delay (configured via the <varname>TimeoutStopSec=</varname> - option), processes still remain, the termination request is - repeated with the <constant>SIGKILL</constant> signal (unless - this is disabled via the <varname>SendSIGKILL=</varname> - option). See - <citerefentry><refentrytitle>kill</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for more information.</para> - - <para>Defaults to - <option>control-group</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>KillSignal=</varname></term> - <listitem><para>Specifies which signal to use when killing a - service. This controls the signal that is sent as first step - of shutting down a unit (see above), and is usually followed - by <constant>SIGKILL</constant> (see above and below). For a - list of valid signals, see - <citerefentry project='man-pages'><refentrytitle>signal</refentrytitle><manvolnum>7</manvolnum></citerefentry>. - Defaults to <constant>SIGTERM</constant>. </para> - - <para>Note that, right after sending the signal specified in - this setting, systemd will always send - <constant>SIGCONT</constant>, to ensure that even suspended - tasks can be terminated cleanly.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>SendSIGHUP=</varname></term> - <listitem><para>Specifies whether to send - <constant>SIGHUP</constant> to remaining processes immediately - after sending the signal configured with - <varname>KillSignal=</varname>. This is useful to indicate to - shells and shell-like programs that their connection has been - severed. Takes a boolean value. Defaults to "no". - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SendSIGKILL=</varname></term> - <listitem><para>Specifies whether to send - <constant>SIGKILL</constant> to remaining processes after a - timeout, if the normal shutdown procedure left processes of - the service around. Takes a boolean value. Defaults to "yes". - </para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>kill</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>signal</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.link.xml b/man/systemd.link.xml deleted file mode 100644 index d5b4d1038d..0000000000 --- a/man/systemd.link.xml +++ /dev/null @@ -1,477 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Tom Gundersen - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.link"> - <refentryinfo> - <title>systemd.link</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Tom</firstname> - <surname>Gundersen</surname> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.link</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.link</refname> - <refpurpose>Network device configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>link</replaceable>.link</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>Network link configuration is performed by the - <command>net_setup_link</command> udev builtin.</para> - - <para>The link files are read from the files located in the system - network directory <filename>/usr/lib/systemd/network</filename>, - the volatile runtime network directory - <filename>/run/systemd/network</filename>, and the local - administration network directory - <filename>/etc/systemd/network</filename>. Link files must have - the extension <filename>.link</filename>; other extensions are - ignored. All link files are collectively sorted and processed in - lexical order, regardless of the directories in which they live. - However, files with identical filenames replace each other. Files - in <filename>/etc</filename> have the highest priority, files in - <filename>/run</filename> take precedence over files with the same - name in <filename>/usr/lib</filename>. This can be used to - override a system-supplied link file with a local file if needed. - As a special case, an empty file (file size 0) or symlink with the - same name pointing to <filename>/dev/null</filename> disables the - configuration file entirely (it is "masked").</para> - - <para>The link file contains a <literal>[Match]</literal> section, - which determines if a given link file may be applied to a given - device, as well as a <literal>[Link]</literal> section specifying - how the device should be configured. The first (in lexical order) - of the link files that matches a given device is applied. Note - that a default file <filename>99-default.link</filename> is - shipped by the system, any user-supplied - <filename>.link</filename> should hence have a lexically earlier - name to be considered at all.</para> - - <para>See - <citerefentry><refentrytitle>udevadm</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for diagnosing problems with <filename>.link</filename> files.</para> - </refsect1> - - <refsect1> - <title>[Match] Section Options</title> - - <para>A link file is said to match a device if each of the entries - in the <literal>[Match]</literal> section matches, or if the - section is empty. The following keys are accepted:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>MACAddress=</varname></term> - <listitem> - <para>The hardware address.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>OriginalName=</varname></term> - <listitem> - <para>A whitespace-separated list of shell-style globs matching - the device name, as exposed by the udev property - "INTERFACE". This can not be used to match on names that have - already been changed from userspace. Caution is advised when matching on - kernel-assigned names, as they are known to be unstable - between reboots.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Path=</varname></term> - <listitem> - <para>A whitespace-separated list of shell-style globs matching - the persistent path, as exposed by the udev property - <literal>ID_PATH</literal>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Driver=</varname></term> - <listitem> - <para>A whitespace-separated list of shell-style globs matching - the driver currently bound to the device, - as exposed by the udev property <literal>DRIVER</literal> - of its parent device, or if that is not set, the - driver as exposed by <literal>ethtool -i</literal> - of the device itself.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Type=</varname></term> - <listitem> - <para>A whitespace-separated list of shell-style globs matching - the device type, as exposed by the udev - property <literal>DEVTYPE</literal>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Host=</varname></term> - <listitem> - <para>Matches against the hostname or machine - ID of the host. See <literal>ConditionHost=</literal> in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Virtualization=</varname></term> - <listitem> - <para>Checks whether the system is executed in - a virtualized environment and optionally test - whether it is a specific implementation. See - <literal>ConditionVirtualization=</literal> in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>KernelCommandLine=</varname></term> - <listitem> - <para>Checks whether a specific kernel command line option - is set (or if prefixed with the exclamation mark unset). See - <literal>ConditionKernelCommandLine=</literal> in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Architecture=</varname></term> - <listitem> - <para>Checks whether the system is running on a specific - architecture. See <literal>ConditionArchitecture=</literal> - in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para> - </listitem> - </varlistentry> - </variablelist> - - </refsect1> - - <refsect1> - <title>[Link] Section Options</title> - - <para>The <literal>[Link]</literal> section accepts the following - keys:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>Description=</varname></term> - <listitem> - <para>A description of the device.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Alias=</varname></term> - <listitem> - <para>The <literal>ifalias</literal> is set to this - value.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>MACAddressPolicy=</varname></term> - <listitem> - <para>The policy by which the MAC address should be set. The - available policies are: - </para> - - <variablelist> - <varlistentry> - <term><literal>persistent</literal></term> - <listitem> - <para>If the hardware has a persistent MAC address, as - most hardware should, and if it is used by the kernel, - nothing is done. Otherwise, a new MAC address is - generated which is guaranteed to be the same on every - boot for the given machine and the given device, but - which is otherwise random. This feature depends on ID_NET_NAME_* - properties to exist for the link. On hardware where these - properties are not set, the generation of a persistent MAC address - will fail.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>random</literal></term> - <listitem> - <para>If the kernel is using a random MAC address, - nothing is done. Otherwise, a new address is randomly - generated each time the device appears, typically at - boot. Either way, the random address will have the - <literal>unicast</literal> and - <literal>locally administered</literal> bits set.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>none</literal></term> - <listitem> - <para>Keeps the MAC address assigned by the kernel.</para> - </listitem> - </varlistentry> - </variablelist> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>MACAddress=</varname></term> - <listitem> - <para>The MAC address to use, if no - <literal>MACAddressPolicy=</literal> - is specified.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>NamePolicy=</varname></term> - <listitem> - <para>An ordered, space-separated list of policies by which - the interface name should be set. - <literal>NamePolicy</literal> may be disabled by specifying - <literal>net.ifnames=0</literal> on the kernel command line. - Each of the policies may fail, and the first successful one - is used. The name is not set directly, but is exported to - udev as the property <literal>ID_NET_NAME</literal>, which - is, by default, used by a udev rule to set - <literal>NAME</literal>. If the name has already been set by - userspace, no renaming is performed. The available policies - are:</para> - - <variablelist> - <varlistentry> - <term><literal>kernel</literal></term> - <listitem> - <para>If the kernel claims that the name it has set - for a device is predictable, then no renaming is - performed.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>database</literal></term> - <listitem> - <para>The name is set based on entries in the udev's - Hardware Database with the key - <literal>ID_NET_NAME_FROM_DATABASE</literal>. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>onboard</literal></term> - <listitem> - <para>The name is set based on information given by - the firmware for on-board devices, as exported by the - udev property <literal>ID_NET_NAME_ONBOARD</literal>. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>slot</literal></term> - <listitem> - <para>The name is set based on information given by - the firmware for hot-plug devices, as exported by the - udev property <literal>ID_NET_NAME_SLOT</literal>. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>path</literal></term> - <listitem> - <para>The name is set based on the device's physical - location, as exported by the udev property - <literal>ID_NET_NAME_PATH</literal>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>mac</literal></term> - <listitem> - <para>The name is set based on the device's persistent - MAC address, as exported by the udev property - <literal>ID_NET_NAME_MAC</literal>.</para> - </listitem> - </varlistentry> - </variablelist> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Name=</varname></term> - <listitem> - <para>The interface name to use in case all the - policies specified in - <varname>NamePolicy=</varname> fail, or in case - <varname>NamePolicy=</varname> is missing or - disabled.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>MTUBytes=</varname></term> - <listitem> - <para>The maximum transmission unit in bytes to set for the - device. The usual suffixes K, M, G, are supported and are - understood to the base of 1024.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>BitsPerSecond=</varname></term> - <listitem> - <para>The speed to set for the device, the value is rounded - down to the nearest Mbps. The usual suffixes K, M, G, are - supported and are understood to the base of 1000.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Duplex=</varname></term> - <listitem> - <para>The duplex mode to set for the device. The accepted - values are <literal>half</literal> and - <literal>full</literal>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>WakeOnLan=</varname></term> - <listitem> - <para>The Wake-on-LAN policy to set for the device. The - supported values are:</para> - - <variablelist> - <varlistentry> - <term><literal>phy</literal></term> - <listitem> - <para>Wake on PHY activity.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>magic</literal></term> - <listitem> - <para>Wake on receipt of a magic packet. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>off</literal></term> - <listitem> - <para>Never wake.</para> - </listitem> - </varlistentry> - </variablelist> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Examples</title> - - <example> - <title>/usr/lib/systemd/network/99-default.link</title> - - <para>The link file <filename>99-default.link</filename> that is - shipped with systemd defines the default naming policy for - links.</para> - - <programlisting>[Link] -NamePolicy=kernel database onboard slot path -MACAddressPolicy=persistent</programlisting> - </example> - - <example> - <title>/etc/systemd/network/10-dmz.link</title> - - <para>This example assigns the fixed name - <literal>dmz0</literal> to the interface with the MAC address - 00:a0:de:63:7a:e6:</para> - - <programlisting>[Match] -MACAddress=00:a0:de:63:7a:e6 - -[Link] -Name=dmz0</programlisting> - </example> - - <example> - <title>/etc/systemd/network/10-internet.link</title> - - <para>This example assigns the fixed name - <literal>internet0</literal> to the interface with the device - path <literal>pci-0000:00:1a.0-*</literal>:</para> - - <programlisting>[Match] -Path=pci-0000:00:1a.0-* - -[Link] -Name=internet0</programlisting> - </example> - - <example> - <title>/etc/systemd/network/25-wireless.link</title> - - <para>Here's an overly complex example that shows the use of a large number of [Match] and [Link] settings.</para> - - <programlisting>[Match] -MACAddress=12:34:56:78:9a:bc -Driver=brcmsmac -Path=pci-0000:02:00.0-* -Type=wlan -Virtualization=no -Host=my-laptop -Architecture=x86-64 - -[Link] -Name=wireless0 -MTUBytes=1450 -BitsPerSecond=10M -WakeOnLan=magic -MACAddress=cb:a9:87:65:43:21</programlisting> - </example> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry> - <refentrytitle>systemd-udevd.service</refentrytitle><manvolnum>8</manvolnum> - </citerefentry>, - <citerefentry> - <refentrytitle>udevadm</refentrytitle><manvolnum>8</manvolnum> - </citerefentry>, - <citerefentry> - <refentrytitle>systemd.netdev</refentrytitle><manvolnum>5</manvolnum> - </citerefentry>, - <citerefentry> - <refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum> - </citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.mount.xml b/man/systemd.mount.xml deleted file mode 100644 index 66cddd72e0..0000000000 --- a/man/systemd.mount.xml +++ /dev/null @@ -1,406 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.mount"> - <refentryinfo> - <title>systemd.mount</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.mount</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.mount</refname> - <refpurpose>Mount unit configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>mount</replaceable>.mount</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>A unit configuration file whose name ends in - <literal>.mount</literal> encodes information about a file system - mount point controlled and supervised by systemd.</para> - - <para>This man page lists the configuration options specific to - this unit type. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for the common options of all unit configuration files. The common - configuration items are configured in the generic [Unit] and - [Install] sections. The mount specific configuration options are - configured in the [Mount] section.</para> - - <para>Additional options are listed in - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - which define the execution environment the - <citerefentry project='man-pages'><refentrytitle>mount</refentrytitle><manvolnum>8</manvolnum></citerefentry> - binary is executed in, and in - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - which define the way the processes are terminated, and in - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - which configure resource control settings for the processes of the - service. Note that the User= and Group= options are not - particularly useful for mount units specifying a - <literal>Type=</literal> option or using configuration not - specified in <filename>/etc/fstab</filename>; - <citerefentry project='man-pages'><refentrytitle>mount</refentrytitle><manvolnum>8</manvolnum></citerefentry> - will refuse options that are not listed in - <filename>/etc/fstab</filename> if it is not run as UID 0.</para> - - <para>Mount units must be named after the mount point directories they control. Example: the mount point <filename - noindex='true'>/home/lennart</filename> must be configured in a unit file <filename>home-lennart.mount</filename>. - For details about the escaping logic used to convert a file system path to a unit name, see - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. Note that mount - units cannot be templated, nor is possible to add multiple names to a mount unit by creating additional symlinks to - it.</para> - - <para>Optionally, a mount unit may be accompanied by an automount - unit, to allow on-demand or parallelized mounting. See - <citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - - <para>Mount points created at runtime (independently of unit files - or <filename>/etc/fstab</filename>) will be monitored by systemd - and appear like any other mount unit in systemd. See - <filename>/proc/self/mountinfo</filename> description in - <citerefentry project='man-pages'><refentrytitle>proc</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para> - - <para>Some file systems have special semantics as API file systems - for kernel-to-userspace and userspace-to-userspace interfaces. Some - of them may not be changed via mount units, and cannot be - disabled. For a longer discussion see <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/APIFileSystems">API - File Systems</ulink>.</para> - </refsect1> - - <refsect1> - <title>Automatic Dependencies</title> - - <para>If a mount unit is beneath another mount unit in the file - system hierarchy, both a requirement dependency and an ordering - dependency between both units are created automatically.</para> - - <para>Block device backed file systems automatically gain - <varname>BindsTo=</varname> and <varname>After=</varname> type - dependencies on the device unit encapsulating the block - device (see below).</para> - - <para>If traditional file system quota is enabled for a mount - unit, automatic <varname>Wants=</varname> and - <varname>Before=</varname> dependencies on - <filename>systemd-quotacheck.service</filename> and - <filename>quotaon.service</filename> are added.</para> - - <para>For mount units with <varname>DefaultDependencies=yes</varname> in the <literal>[Unit]</literal> section (the - default) a couple additional dependencies are added. Mount units referring to local file systems automatically gain - an <varname>After=</varname> dependency on <filename>local-fs-pre.target</filename>. Network mount units - automatically acquire <varname>After=</varname> dependencies on <filename>remote-fs-pre.target</filename>, - <filename>network.target</filename> and <filename>network-online.target</filename>. Towards the latter a - <varname>Wants=</varname> unit is added as well. Mount units referring to local and network file systems are - distinguished by their file system type specification. In some cases this is not sufficient (for example network - block device based mounts, such as iSCSI), in which case <option>_netdev</option> may be added to the mount option - string of the unit, which forces systemd to consider the mount unit a network mount. Mount units (regardless if - local or network) also acquire automatic <varname>Before=</varname> and <varname>Conflicts=</varname> on - <filename>umount.target</filename> in order to be stopped during shutdown.</para> - - <para>Additional implicit dependencies may be added as result of - execution and resource control parameters as documented in - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title><filename>fstab</filename></title> - - <para>Mount units may either be configured via unit files, or via - <filename>/etc/fstab</filename> (see - <citerefentry project='man-pages'><refentrytitle>fstab</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details). Mounts listed in <filename>/etc/fstab</filename> - will be converted into native units dynamically at boot and when - the configuration of the system manager is reloaded. In general, - configuring mount points through <filename>/etc/fstab</filename> - is the preferred approach. See - <citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for details about the conversion.</para> - - <para>The NFS mount option <option>bg</option> for NFS background mounts - as documented in <citerefentry><refentrytitle>nfs</refentrytitle><manvolnum>5</manvolnum></citerefentry> - is not supported in <filename>/etc/fstab</filename> entries. The systemd mount option <option>nofail</option> - provides similar functionality and should be used instead.</para> - - <para>When reading <filename>/etc/fstab</filename> a few special - mount options are understood by systemd which influence how - dependencies are created for mount points. systemd will create a - dependency of type <varname>Wants=</varname> or - <option>Requires</option> (see option <option>nofail</option> - below), from either <filename>local-fs.target</filename> or - <filename>remote-fs.target</filename>, depending whether the file - system is local or remote.</para> - - <variablelist class='fstab-options'> - - <varlistentry> - <term><option>x-systemd.requires=</option></term> - - <listitem><para>Configures a <varname>Requires=</varname> and - an <varname>After=</varname> dependency between the created - mount unit and another systemd unit, such as a device or mount - unit. The argument should be a unit name, or an absolute path - to a device node or mount point. This option may be specified - more than once. This option is particularly useful for mount - point declarations that need an additional device to be around - (such as an external journal device for journal file systems) - or an additional mount to be in place (such as an overlay file - system that merges multiple mount points). See - <varname>After=</varname> and <varname>Requires=</varname> in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>x-systemd.requires-mounts-for=</option></term> - - <listitem><para>Configures a - <varname>RequiresMountsFor=</varname> dependency between the - created mount unit and other mount units. The argument must be - an absolute path. This option may be specified more than once. - See <varname>RequiresMountsFor=</varname> in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>x-systemd.automount</option></term> - - <listitem><para>An automount unit will be created for the file - system. See - <citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>x-systemd.idle-timeout=</option></term> - - <listitem><para>Configures the idle timeout of the - automount unit. See <varname>TimeoutIdleSec=</varname> in - <citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>x-systemd.device-timeout=</option></term> - - <listitem><para>Configure how long systemd should wait for a - device to show up before giving up on an entry from - <filename>/etc/fstab</filename>. Specify a time in seconds or - explicitly append a unit such as <literal>s</literal>, - <literal>min</literal>, <literal>h</literal>, - <literal>ms</literal>.</para> - - <para>Note that this option can only be used in - <filename>/etc/fstab</filename>, and will be - ignored when part of the <varname>Options=</varname> - setting in a unit file.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>noauto</option></term> - <term><option>auto</option></term> - - <listitem><para>With <option>noauto</option>, this mount will - not be added as a dependency for - <filename>local-fs.target</filename> or - <filename>remote-fs.target</filename>. This means that it will - not be mounted automatically during boot, unless it is pulled - in by some other unit. The <option>auto</option> option has the - opposite meaning and is the default.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>nofail</option></term> - - <listitem><para>With <option>nofail</option>, this mount will - be only wanted, not required, by - <filename>local-fs.target</filename> or - <filename>remote-fs.target</filename>. This means that the - boot will continue even if this mount point is not mounted - successfully.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>x-initrd.mount</option></term> - - <listitem><para>An additional filesystem to be mounted in the - initramfs. See <filename>initrd-fs.target</filename> - description in - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - </variablelist> - - <para>If a mount point is configured in both - <filename>/etc/fstab</filename> and a unit file that is stored - below <filename>/usr</filename>, the former will take precedence. - If the unit file is stored below <filename>/etc</filename>, it - will take precedence. This means: native unit files take - precedence over traditional configuration files, but this is - superseded by the rule that configuration in - <filename>/etc</filename> will always take precedence over - configuration in <filename>/usr</filename>.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>Mount files must include a [Mount] section, which carries - information about the file system mount points it supervises. A - number of options that may be used in this section are shared with - other unit types. These options are documented in - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - The options specific to the [Mount] section of mount units are the - following:</para> - - <variablelist class='unit-directives'> - - <varlistentry> - <term><varname>What=</varname></term> - <listitem><para>Takes an absolute path of a device node, file - or other resource to mount. See - <citerefentry project='man-pages'><refentrytitle>mount</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for details. If this refers to a device node, a dependency on - the respective device unit is automatically created. (See - <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information.) This option is - mandatory.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Where=</varname></term> - <listitem><para>Takes an absolute path of a directory of the - mount point. If the mount point does not exist at the time of - mounting, it is created. This string must be reflected in the - unit filename. (See above.) This option is - mandatory.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Type=</varname></term> - <listitem><para>Takes a string for the file system type. See - <citerefentry project='man-pages'><refentrytitle>mount</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for details. This setting is optional.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Options=</varname></term> - - <listitem><para>Mount options to use when mounting. This takes - a comma-separated list of options. This setting is - optional.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SloppyOptions=</varname></term> - - <listitem><para>Takes a boolean argument. If true, parsing of - the options specified in <varname>Options=</varname> is - relaxed, and unknown mount options are tolerated. This - corresponds with - <citerefentry project='man-pages'><refentrytitle>mount</refentrytitle><manvolnum>8</manvolnum></citerefentry>'s - <parameter>-s</parameter> switch. Defaults to - off.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DirectoryMode=</varname></term> - <listitem><para>Directories of mount points (and any parent - directories) are automatically created if needed. This option - specifies the file system access mode used when creating these - directories. Takes an access mode in octal notation. Defaults - to 0755.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>TimeoutSec=</varname></term> - <listitem><para>Configures the time to wait for the mount - command to finish. If a command does not exit within the - configured time, the mount will be considered failed and be - shut down again. All commands still running will be terminated - forcibly via <constant>SIGTERM</constant>, and after another - delay of this time with <constant>SIGKILL</constant>. (See - <option>KillMode=</option> in - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>.) - Takes a unit-less value in seconds, or a time span value such - as "5min 20s". Pass 0 to disable the timeout logic. The - default value is set from the manager configuration file's - <varname>DefaultTimeoutStart=</varname> - variable.</para></listitem> - </varlistentry> - </variablelist> - - <para>Check - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more settings.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>proc</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>mount</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.netdev.xml b/man/systemd.netdev.xml deleted file mode 100644 index 8d12c305d2..0000000000 --- a/man/systemd.netdev.xml +++ /dev/null @@ -1,1116 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2013 Tom Gundersen - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.netdev" conditional='ENABLE_NETWORKD'> - - <refentryinfo> - <title>systemd.network</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Tom</firstname> - <surname>Gundersen</surname> - <email>teg@jklm.no</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.netdev</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.netdev</refname> - <refpurpose>Virtual Network Device configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>netdev</replaceable>.netdev</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>Network setup is performed by - <citerefentry><refentrytitle>systemd-networkd</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - </para> - - <para>Virtual Network Device files must have the extension - <filename>.netdev</filename>; other extensions are ignored. - Virtual network devices are created as soon as networkd is - started. If a netdev with the specified name already exists, - networkd will use that as-is rather than create its own. Note that - the settings of the pre-existing netdev will not be changed by - networkd.</para> - - <para>The <filename>.netdev</filename> files are read from the - files located in the system network directory - <filename>/usr/lib/systemd/network</filename>, the volatile - runtime network directory - <filename>/run/systemd/network</filename> and the local - administration network directory - <filename>/etc/systemd/network</filename>. All configuration files - are collectively sorted and processed in lexical order, regardless - of the directories in which they live. However, files with - identical filenames replace each other. Files in - <filename>/etc</filename> have the highest priority, files in - <filename>/run</filename> take precedence over files with the same - name in <filename>/usr/lib</filename>. This can be used to - override a system-supplied configuration file with a local file if - needed. As a special case, an empty file (file size 0) or symlink - with the same name pointing to <filename>/dev/null</filename> - disables the configuration file entirely (it is "masked").</para> - </refsect1> - - <refsect1> - <title>Supported netdev kinds</title> - - <para>The following kinds of virtual network devices may be - configured in <filename>.netdev</filename> files:</para> - - <table> - <title>Supported kinds of virtual network devices</title> - - <tgroup cols='2'> - <colspec colname='kind' /> - <colspec colname='explanation' /> - <thead><row> - <entry>Kind</entry> - <entry>Description</entry> - </row></thead> - <tbody> - <row><entry><varname>bond</varname></entry> - <entry>A bond device is an aggregation of all its slave devices. See <ulink url="https://www.kernel.org/doc/Documentation/networking/bonding.txt">Linux Ethernet Bonding Driver HOWTO</ulink> for details.Local configuration</entry></row> - - <row><entry><varname>bridge</varname></entry> - <entry>A bridge device is a software switch, and each of its slave devices and the bridge itself are ports of the switch.</entry></row> - - <row><entry><varname>dummy</varname></entry> - <entry>A dummy device drops all packets sent to it.</entry></row> - - <row><entry><varname>gre</varname></entry> - <entry>A Level 3 GRE tunnel over IPv4. See <ulink url="https://tools.ietf.org/html/rfc2784">RFC 2784</ulink> for details.</entry></row> - - <row><entry><varname>gretap</varname></entry> - <entry>A Level 2 GRE tunnel over IPv4.</entry></row> - - <row><entry><varname>ip6gre</varname></entry> - <entry>A Level 3 GRE tunnel over IPv6.</entry></row> - - <row><entry><varname>ip6tnl</varname></entry> - <entry>An IPv4 or IPv6 tunnel over IPv6</entry></row> - - <row><entry><varname>ip6gretap</varname></entry> - <entry>An Level 2 GRE tunnel over IPv6.</entry></row> - - <row><entry><varname>ipip</varname></entry> - <entry>An IPv4 over IPv4 tunnel.</entry></row> - - <row><entry><varname>ipvlan</varname></entry> - <entry>An ipvlan device is a stacked device which receives packets from its underlying device based on IP address filtering.</entry></row> - - <row><entry><varname>macvlan</varname></entry> - <entry>A macvlan device is a stacked device which receives packets from its underlying device based on MAC address filtering.</entry></row> - - <row><entry><varname>macvtap</varname></entry> - <entry>A macvtap device is a stacked device which receives packets from its underlying device based on MAC address filtering.</entry></row> - - <row><entry><varname>sit</varname></entry> - <entry>An IPv6 over IPv4 tunnel.</entry></row> - - <row><entry><varname>tap</varname></entry> - <entry>A persistent Level 2 tunnel between a network device and a device node.</entry></row> - - <row><entry><varname>tun</varname></entry> - <entry>A persistent Level 3 tunnel between a network device and a device node.</entry></row> - - <row><entry><varname>veth</varname></entry> - <entry>An Ethernet tunnel between a pair of network devices.</entry></row> - - <row><entry><varname>vlan</varname></entry> - <entry>A VLAN is a stacked device which receives packets from its underlying device based on VLAN tagging. See <ulink url="http://www.ieee802.org/1/pages/802.1Q.html">IEEE 802.1Q</ulink> for details.</entry></row> - - <row><entry><varname>vti</varname></entry> - <entry>An IPv4 over IPSec tunnel.</entry></row> - - <row><entry><varname>vti6</varname></entry> - <entry>An IPv6 over IPSec tunnel.</entry></row> - - <row><entry><varname>vxlan</varname></entry> - <entry>A virtual extensible LAN (vxlan), for connecting Cloud computing deployments.</entry></row> - </tbody> - </tgroup> - </table> - - </refsect1> - - <refsect1> - <title>[Match] Section Options</title> - - <para>A virtual network device is only created if the - <literal>[Match]</literal> section matches the current - environment, or if the section is empty. The following keys are - accepted:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>Host=</varname></term> - <listitem> - <para>Matches against the hostname or machine ID of the - host. See <literal>ConditionHost=</literal> in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Virtualization=</varname></term> - <listitem> - <para>Checks whether the system is executed in a virtualized - environment and optionally test whether it is a specific - implementation. See - <literal>ConditionVirtualization=</literal> in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>KernelCommandLine=</varname></term> - <listitem> - <para>Checks whether a specific kernel command line option - is set (or if prefixed with the exclamation mark unset). See - <literal>ConditionKernelCommandLine=</literal> in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Architecture=</varname></term> - <listitem> - <para>Checks whether the system is running on a specific - architecture. See <literal>ConditionArchitecture=</literal> in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. - </para> - </listitem> - </varlistentry> - </variablelist> - - </refsect1> - - <refsect1> - <title>[NetDev] Section Options</title> - - <para>The <literal>[NetDev]</literal> section accepts the - following keys:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>Description=</varname></term> - <listitem> - <para>A free-form description of the netdev.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Name=</varname></term> - <listitem> - <para>The interface name used when creating the netdev. - This option is compulsory.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Kind=</varname></term> - <listitem> - <para>The netdev kind. This option is compulsory. See the - <literal>Supported netdev kinds</literal> section for the - valid keys.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>MTUBytes=</varname></term> - <listitem> - <para>The maximum transmission unit in bytes to set for - the device. The usual suffixes K, M, G, are supported and - are understood to the base of 1024. This key is not - currently supported for <literal>tun</literal> or - <literal>tap</literal> devices. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>MACAddress=</varname></term> - <listitem> - <para>The MAC address to use for the device. If none is - given, one is generated based on the interface name and - the - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - This key is not currently supported for - <literal>tun</literal> or <literal>tap</literal> devices. - </para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>[Bridge] Section Options</title> - - <para>The <literal>[Bridge]</literal> section only applies for - netdevs of kind <literal>bridge</literal>, and accepts the - following keys:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>HelloTimeSec=</varname></term> - <listitem> - <para>HelloTimeSec specifies the number of seconds between two hello packets - sent out by the root bridge and the designated bridges. Hello packets are - used to communicate information about the topology throughout the entire - bridged local area network.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>MaxAgeSec=</varname></term> - <listitem> - <para>MaxAgeSec specifies the number of seconds of maximum message age. - If the last seen (received) hello packet is more than this number of - seconds old, the bridge in question will start the takeover procedure - in attempt to become the Root Bridge itself.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>ForwardDelaySec=</varname></term> - <listitem> - <para>ForwardDelaySec specifies the number of seconds spent in each - of the Listening and Learning states before the Forwarding state is entered.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>MulticastQuerier=</varname></term> - <listitem> - <para>A boolean. This setting controls the IFLA_BR_MCAST_QUERIER option in the kernel. - If enabled, the kernel will send general ICMP queries from a zero source address. - This feature should allow faster convergence on startup, but it causes some - multicast-aware switches to misbehave and disrupt forwarding of multicast packets. - When unset, the kernel's default setting applies. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>MulticastSnooping=</varname></term> - <listitem> - <para>A boolean. This setting controls the IFLA_BR_MCAST_SNOOPING option in the kernel. - If enabled, IGMP snooping monitors the Internet Group Management Protocol (IGMP) traffic - between hosts and multicast routers. When unset, the kernel's default setting applies. - </para> - </listitem> - </varlistentry> - </variablelist> - - </refsect1> - - <refsect1> - <title>[VLAN] Section Options</title> - - <para>The <literal>[VLAN]</literal> section only applies for - netdevs of kind <literal>vlan</literal>, and accepts the - following key:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>Id=</varname></term> - <listitem> - <para>The VLAN ID to use. An integer in the range 0–4094. - This option is compulsory.</para> - </listitem> - </varlistentry> - </variablelist> - - </refsect1> - - <refsect1> - <title>[MACVLAN] Section Options</title> - - <para>The <literal>[MACVLAN]</literal> section only applies for - netdevs of kind <literal>macvlan</literal>, and accepts the - following key:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>Mode=</varname></term> - <listitem> - <para>The MACVLAN mode to use. The supported options are - <literal>private</literal>, - <literal>vepa</literal>, - <literal>bridge</literal>, and - <literal>passthru</literal>. - </para> - </listitem> - </varlistentry> - </variablelist> - - </refsect1> - - <refsect1> - <title>[MACVTAP] Section Options</title> - - <para>The <literal>[MACVTAP]</literal> section applies for - netdevs of kind <literal>macvtap</literal> and accepts the - same key as <literal>[MACVLAN]</literal>.</para> - - </refsect1> - - <refsect1> - <title>[IPVLAN] Section Options</title> - - <para>The <literal>[IPVLAN]</literal> section only applies for - netdevs of kind <literal>ipvlan</literal>, and accepts the - following key:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>Mode=</varname></term> - <listitem> - <para>The IPVLAN mode to use. The supported options are - <literal>L2</literal> and <literal>L3</literal>. - </para> - </listitem> - </varlistentry> - </variablelist> - - </refsect1> - - <refsect1> - <title>[VXLAN] Section Options</title> - <para>The <literal>[VXLAN]</literal> section only applies for - netdevs of kind <literal>vxlan</literal>, and accepts the - following keys:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>Id=</varname></term> - <listitem> - <para>The VXLAN ID to use.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Group=</varname></term> - <listitem> - <para>An assigned multicast group IP address.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>TOS=</varname></term> - <listitem> - <para>The Type Of Service byte value for a vxlan interface.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>TTL=</varname></term> - <listitem> - <para>A fixed Time To Live N on Virtual eXtensible Local - Area Network packets. N is a number in the range 1–255. 0 - is a special value meaning that packets inherit the TTL - value.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>MacLearning=</varname></term> - <listitem> - <para>A boolean. When true, enables dynamic MAC learning - to discover remote MAC addresses.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>FDBAgeingSec=</varname></term> - <listitem> - <para>The lifetime of Forwarding Database entry learnt by - the kernel, in seconds.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>MaximumFDBEntries=</varname></term> - <listitem> - <para>Configures maximum number of FDB entries.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>ARPProxy=</varname></term> - <listitem> - <para>A boolean. When true, enables ARP proxying.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>L2MissNotification=</varname></term> - <listitem> - <para>A boolean. When true, enables netlink LLADDR miss - notifications.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>L3MissNotification=</varname></term> - <listitem> - <para>A boolean. When true, enables netlink IP address miss - notifications.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>RouteShortCircuit=</varname></term> - <listitem> - <para>A boolean. When true, route short circuiting is turned - on.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>UDPCheckSum=</varname></term> - <listitem> - <para>A boolean. When true, transmitting UDP checksums when doing VXLAN/IPv4 is turned on.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>UDP6ZeroChecksumTx=</varname></term> - <listitem> - <para>A boolean. When true, sending zero checksums in VXLAN/IPv6 is turned on.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>UDP6ZeroCheckSumRx=</varname></term> - <listitem> - <para>A boolean. When true, receiving zero checksums in VXLAN/IPv6 is turned on.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>GroupPolicyExtension=</varname></term> - <listitem> - <para>A boolean. When true, it enables Group Policy VXLAN extension security label mechanism - across network peers based on VXLAN. For details about the Group Policy VXLAN, see the - <ulink url="https://tools.ietf.org/html/draft-smith-vxlan-group-policy"> - VXLAN Group Policy </ulink> document. Defaults to false.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>DestinationPort=</varname></term> - <listitem> - <para>Configures the default destination UDP port on a per-device basis. - If destination port is not specified then Linux kernel default will be used. - Set destination port 4789 to get the IANA assigned value, - and destination port 0 to get default values.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>PortRange=</varname></term> - <listitem> - <para>Configures VXLAN port range. VXLAN bases source - UDP port based on flow to help the receiver to be able - to load balance based on outer header flow. It - restricts the port range to the normal UDP local - ports, and allows overriding via configuration.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - <refsect1> - <title>[Tunnel] Section Options</title> - - <para>The <literal>[Tunnel]</literal> section only applies for - netdevs of kind - <literal>ipip</literal>, - <literal>sit</literal>, - <literal>gre</literal>, - <literal>gretap</literal>, - <literal>ip6gre</literal>, - <literal>ip6gretap</literal>, - <literal>vti</literal>, - <literal>vti6</literal>, and - <literal>ip6tnl</literal> and accepts - the following keys:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>Local=</varname></term> - <listitem> - <para>A static local address for tunneled packets. It must - be an address on another interface of this host.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Remote=</varname></term> - <listitem> - <para>The remote endpoint of the tunnel.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>TOS=</varname></term> - <listitem> - <para>The Type Of Service byte value for a tunnel interface. - For details about the TOS, see the - <ulink url="http://tools.ietf.org/html/rfc1349"> Type of - Service in the Internet Protocol Suite </ulink> document. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>TTL=</varname></term> - <listitem> - <para>A fixed Time To Live N on tunneled packets. N is a - number in the range 1–255. 0 is a special value meaning that - packets inherit the TTL value. The default value for IPv4 - tunnels is: inherit. The default value for IPv6 tunnels is - 64.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>DiscoverPathMTU=</varname></term> - <listitem> - <para>A boolean. When true, enables Path MTU Discovery on - the tunnel.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>IPv6FlowLabel=</varname></term> - <listitem> - <para>Configures the 20-bit flow label (see <ulink url="https://tools.ietf.org/html/rfc6437"> - RFC 6437</ulink>) field in the IPv6 header (see <ulink url="https://tools.ietf.org/html/rfc2460"> - RFC 2460</ulink>), which is used by a node to label packets of a flow. - It is only used for IPv6 tunnels. - A flow label of zero is used to indicate packets that have - not been labeled. - It can be configured to a value in the range 0–0xFFFFF, or be - set to <literal>inherit</literal>, in which case the original flowlabel is used.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>CopyDSCP=</varname></term> - <listitem> - <para>A boolean. When true, the Differentiated Service Code - Point (DSCP) field will be copied to the inner header from - outer header during the decapsulation of an IPv6 tunnel - packet. DSCP is a field in an IP packet that enables different - levels of service to be assigned to network traffic. - Defaults to <literal>no</literal>. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>EncapsulationLimit=</varname></term> - <listitem> - <para>The Tunnel Encapsulation Limit option specifies how many additional - levels of encapsulation are permitted to be prepended to the packet. - For example, a Tunnel Encapsulation Limit option containing a limit - value of zero means that a packet carrying that option may not enter - another tunnel before exiting the current tunnel. - (see <ulink url="https://tools.ietf.org/html/rfc2473#section-4.1.1"> RFC 2473</ulink>). - The valid range is 0–255 and <literal>none</literal>. Defaults to 4. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Mode=</varname></term> - <listitem> - <para>An <literal>ip6tnl</literal> tunnel can be in one of three - modes - <literal>ip6ip6</literal> for IPv6 over IPv6, - <literal>ipip6</literal> for IPv4 over IPv6 or - <literal>any</literal> for either. - </para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - <refsect1> - <title>[Peer] Section Options</title> - - <para>The <literal>[Peer]</literal> section only applies for - netdevs of kind <literal>veth</literal> and accepts the - following keys:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>Name=</varname></term> - <listitem> - <para>The interface name used when creating the netdev. - This option is compulsory.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>MACAddress=</varname></term> - <listitem> - <para>The peer MACAddress, if not set, it is generated in - the same way as the MAC address of the main - interface.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - <refsect1> - <title>[Tun] Section Options</title> - - <para>The <literal>[Tun]</literal> section only applies for - netdevs of kind <literal>tun</literal>, and accepts the following - keys:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>OneQueue=</varname></term> - <listitem><para>Takes a boolean argument. Configures whether - all packets are queued at the device (enabled), or a fixed - number of packets are queued at the device and the rest at the - <literal>qdisc</literal>. Defaults to - <literal>no</literal>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>MultiQueue=</varname></term> - <listitem><para>Takes a boolean argument. Configures whether - to use multiple file descriptors (queues) to parallelize - packets sending and receiving. Defaults to - <literal>no</literal>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>PacketInfo=</varname></term> - <listitem><para>Takes a boolean argument. Configures whether - packets should be prepended with four extra bytes (two flag - bytes and two protocol bytes). If disabled, it indicates that - the packets will be pure IP packets. Defaults to - <literal>no</literal>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>VNetHeader=</varname></term> - <listitem><para>Takes a boolean argument. Configures - IFF_VNET_HDR flag for a tap device. It allows sending - and receiving larger Generic Segmentation Offload (GSO) - packets. This may increase throughput significantly. - Defaults to - <literal>no</literal>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>User=</varname></term> - <listitem><para>User to grant access to the - <filename>/dev/net/tun</filename> device.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Group=</varname></term> - <listitem><para>Group to grant access to the - <filename>/dev/net/tun</filename> device.</para> - </listitem> - </varlistentry> - - </variablelist> - - </refsect1> - - <refsect1> - <title>[Tap] Section Options</title> - - <para>The <literal>[Tap]</literal> section only applies for - netdevs of kind <literal>tap</literal>, and accepts the same keys - as the <literal>[Tun]</literal> section.</para> - </refsect1> - - <refsect1> - <title>[Bond] Section Options</title> - - <para>The <literal>[Bond]</literal> section accepts the following - key:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>Mode=</varname></term> - <listitem> - <para>Specifies one of the bonding policies. The default is - <literal>balance-rr</literal> (round robin). Possible values are - <literal>balance-rr</literal>, - <literal>active-backup</literal>, - <literal>balance-xor</literal>, - <literal>broadcast</literal>, - <literal>802.3ad</literal>, - <literal>balance-tlb</literal>, and - <literal>balance-alb</literal>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>TransmitHashPolicy=</varname></term> - <listitem> - <para>Selects the transmit hash policy to use for slave - selection in balance-xor, 802.3ad, and tlb modes. Possible - values are - <literal>layer2</literal>, - <literal>layer3+4</literal>, - <literal>layer2+3</literal>, - <literal>encap2+3</literal>, - <literal>802.3ad</literal>, and - <literal>encap3+4</literal>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>LACPTransmitRate=</varname></term> - <listitem> - <para>Specifies the rate with which link partner transmits - Link Aggregation Control Protocol Data Unit packets in - 802.3ad mode. Possible values are <literal>slow</literal>, - which requests partner to transmit LACPDUs every 30 seconds, - and <literal>fast</literal>, which requests partner to - transmit LACPDUs every second. The default value is - <literal>slow</literal>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>MIIMonitorSec=</varname></term> - <listitem> - <para>Specifies the frequency that Media Independent - Interface link monitoring will occur. A value of zero - disables MII link monitoring. This value is rounded down to - the nearest millisecond. The default value is 0.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>UpDelaySec=</varname></term> - <listitem> - <para>Specifies the delay before a link is enabled after a - link up status has been detected. This value is rounded down - to a multiple of MIIMonitorSec. The default value is - 0.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>DownDelaySec=</varname></term> - <listitem> - <para>Specifies the delay before a link is disabled after a - link down status has been detected. This value is rounded - down to a multiple of MIIMonitorSec. The default value is - 0.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>LearnPacketIntervalSec=</varname></term> - <listitem> - <para>Specifies the number of seconds between instances where the bonding - driver sends learning packets to each slave peer switch. - The valid range is 1–0x7fffffff; the default value is 1. This option - has an effect only for the balance-tlb and balance-alb modes.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>AdSelect=</varname></term> - <listitem> - <para>Specifies the 802.3ad aggregation selection logic to use. Possible values are - <literal>stable</literal>, - <literal>bandwidth</literal> and - <literal>count</literal>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>FailOverMACPolicy=</varname></term> - <listitem> - <para>Specifies whether the active-backup mode should set all slaves to - the same MAC address at the time of enslavement or, when enabled, to perform special handling of the - bond's MAC address in accordance with the selected policy. The default policy is none. - Possible values are - <literal>none</literal>, - <literal>active</literal> and - <literal>follow</literal>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>ARPValidate=</varname></term> - <listitem> - <para>Specifies whether or not ARP probes and replies should be - validated in any mode that supports ARP monitoring, or whether - non-ARP traffic should be filtered (disregarded) for link - monitoring purposes. Possible values are - <literal>none</literal>, - <literal>active</literal>, - <literal>backup</literal> and - <literal>all</literal>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>ARPIntervalSec=</varname></term> - <listitem> - <para>Specifies the ARP link monitoring frequency in milliseconds. - A value of 0 disables ARP monitoring. The default value is 0. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>ARPIPTargets=</varname></term> - <listitem> - <para>Specifies the IP addresses to use as ARP monitoring peers when - ARPIntervalSec is greater than 0. These are the targets of the ARP request - sent to determine the health of the link to the targets. - Specify these values in IPv4 dotted decimal format. At least one IP - address must be given for ARP monitoring to function. The - maximum number of targets that can be specified is 16. The - default value is no IP addresses. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>ARPAllTargets=</varname></term> - <listitem> - <para>Specifies the quantity of ARPIPTargets that must be reachable - in order for the ARP monitor to consider a slave as being up. - This option affects only active-backup mode for slaves with - ARPValidate enabled. Possible values are - <literal>any</literal> and - <literal>all</literal>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>PrimaryReselectPolicy=</varname></term> - <listitem> - <para>Specifies the reselection policy for the primary slave. This - affects how the primary slave is chosen to become the active slave - when failure of the active slave or recovery of the primary slave - occurs. This option is designed to prevent flip-flopping between - the primary slave and other slaves. Possible values are - <literal>always</literal>, - <literal>better</literal> and - <literal>failure</literal>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>ResendIGMP=</varname></term> - <listitem> - <para>Specifies the number of IGMP membership reports to be issued after - a failover event. One membership report is issued immediately after - the failover, subsequent packets are sent in each 200ms interval. - The valid range is 0–255. Defaults to 1. A value of 0 - prevents the IGMP membership report from being issued in response - to the failover event. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>PacketsPerSlave=</varname></term> - <listitem> - <para>Specify the number of packets to transmit through a slave before - moving to the next one. When set to 0, then a slave is chosen at - random. The valid range is 0–65535. Defaults to 1. This option - only has effect when in balance-rr mode. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>GratuitousARP=</varname></term> - <listitem> - <para>Specify the number of peer notifications (gratuitous ARPs and - unsolicited IPv6 Neighbor Advertisements) to be issued after a - failover event. As soon as the link is up on the new slave, - a peer notification is sent on the bonding device and each - VLAN sub-device. This is repeated at each link monitor interval - (ARPIntervalSec or MIIMonitorSec, whichever is active) if the number is - greater than 1. The valid range is 0–255. The default value is 1. - These options affect only the active-backup mode. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>AllSlavesActive=</varname></term> - <listitem> - <para>A boolean. Specifies that duplicate frames (received on inactive ports) - should be dropped when false, or delivered when true. Normally, bonding will drop - duplicate frames (received on inactive ports), which is desirable for - most users. But there are some times it is nice to allow duplicate - frames to be delivered. The default value is false (drop duplicate frames - received on inactive ports). - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>MinLinks=</varname></term> - <listitem> - <para>Specifies the minimum number of links that must be active before - asserting carrier. The default value is 0. - </para> - </listitem> - </varlistentry> - - </variablelist> - - <para>For more detail information see - <ulink url="https://www.kernel.org/doc/Documentation/networking/bonding.txt"> - Linux Ethernet Bonding Driver HOWTO</ulink></para> - - </refsect1> - - <refsect1> - <title>Example</title> - <example> - <title>/etc/systemd/network/25-bridge.netdev</title> - - <programlisting>[NetDev] -Name=bridge0 -Kind=bridge</programlisting> - </example> - - <example> - <title>/etc/systemd/network/25-vlan1.netdev</title> - - <programlisting>[Match] -Virtualization=no - -[NetDev] -Name=vlan1 -Kind=vlan - -[VLAN] -Id=1</programlisting> - </example> - <example> - <title>/etc/systemd/network/25-ipip.netdev</title> - <programlisting>[NetDev] -Name=ipip-tun -Kind=ipip -MTUBytes=1480 - -[Tunnel] -Local=192.168.223.238 -Remote=192.169.224.239 -TTL=64</programlisting> - </example> - <example> - <title>/etc/systemd/network/25-tap.netdev</title> - <programlisting>[NetDev] -Name=tap-test -Kind=tap - -[Tap] -MultiQueue=true -PacketInfo=true</programlisting> </example> - - <example> - <title>/etc/systemd/network/25-sit.netdev</title> - <programlisting>[NetDev] -Name=sit-tun -Kind=sit -MTUBytes=1480 - -[Tunnel] -Local=10.65.223.238 -Remote=10.65.223.239</programlisting> - </example> - - <example> - <title>/etc/systemd/network/25-gre.netdev</title> - <programlisting>[NetDev] -Name=gre-tun -Kind=gre -MTUBytes=1480 - -[Tunnel] -Local=10.65.223.238 -Remote=10.65.223.239</programlisting> - </example> - - <example> - <title>/etc/systemd/network/25-vti.netdev</title> - - <programlisting>[NetDev] -Name=vti-tun -Kind=vti -MTUBytes=1480 - -[Tunnel] -Local=10.65.223.238 -Remote=10.65.223.239</programlisting> - </example> - - <example> - <title>/etc/systemd/network/25-veth.netdev</title> - <programlisting>[NetDev] -Name=veth-test -Kind=veth - -[Peer] -Name=veth-peer</programlisting> - </example> - - <example> - <title>/etc/systemd/network/25-bond.netdev</title> - <programlisting>[NetDev] -Name=bond1 -Kind=bond - -[Bond] -Mode=802.3ad -TransmitHashPolicy=layer3+4 -MIIMonitorSec=1s -LACPTransmitRate=fast -</programlisting> - </example> - - <example> - <title>/etc/systemd/network/25-dummy.netdev</title> - <programlisting>[NetDev] -Name=dummy-test -Kind=dummy -MACAddress=12:34:56:78:9a:bc</programlisting> - </example> - - </refsect1> - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-networkd</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.link</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.network</refentrytitle><manvolnum>5</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.network.xml b/man/systemd.network.xml deleted file mode 100644 index 821e22aff8..0000000000 --- a/man/systemd.network.xml +++ /dev/null @@ -1,1205 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2013 Tom Gundersen - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.network" conditional='ENABLE_NETWORKD'> - - <refentryinfo> - <title>systemd.network</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Tom</firstname> - <surname>Gundersen</surname> - <email>teg@jklm.no</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.network</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.network</refname> - <refpurpose>Network configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>network</replaceable>.network</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>Network setup is performed by - <citerefentry><refentrytitle>systemd-networkd</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - </para> - - <para>Network files must have the extension - <filename>.network</filename>; other extensions are ignored. - Networks are applied to links whenever the links appear.</para> - - <para>The <filename>.network</filename> files are read from the - files located in the system network directory - <filename>/usr/lib/systemd/network</filename>, the volatile - runtime network directory - <filename>/run/systemd/network</filename> and the local - administration network directory - <filename>/etc/systemd/network</filename>. All configuration files - are collectively sorted and processed in lexical order, regardless - of the directories in which they live. However, files with - identical filenames replace each other. Files in - <filename>/etc</filename> have the highest priority, files in - <filename>/run</filename> take precedence over files with the same - name in <filename>/usr/lib</filename>. This can be used to - override a system-supplied configuration file with a local file if - needed. As a special case, an empty file (file size 0) or symlink - with the same name pointing to <filename>/dev/null</filename> - disables the configuration file entirely (it is "masked").</para> - - <para>Note that an interface without any static IPv6 addresses configured, and neither DHCPv6 nor IPv6LL enabled, - shall be considered to have no IPv6 support. IPv6 will be automatically disabled for that interface by writing "1" - to <filename>/proc/sys/net/ipv6/conf/<replaceable>ifname</replaceable>/disable_ipv6</filename>. - </para> - </refsect1> - - <refsect1> - <title>[Match] Section Options</title> - - <para>The network file contains a <literal>[Match]</literal> - section, which determines if a given network file may be applied - to a given device; and a <literal>[Network]</literal> section - specifying how the device should be configured. The first (in - lexical order) of the network files that matches a given device - is applied, all later files are ignored, even if they match as - well.</para> - - <para>A network file is said to match a device if each of the - entries in the <literal>[Match]</literal> section matches, or if - the section is empty. The following keys are accepted:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>MACAddress=</varname></term> - <listitem> - <para>The hardware address of the interface (use full colon-delimited hexadecimal, e.g., - 01:23:45:67:89:ab).</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Path=</varname></term> - <listitem> - <para>A whitespace-separated list of shell-style globs - matching the persistent path, as exposed by the udev - property <literal>ID_PATH</literal>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Driver=</varname></term> - <listitem> - <para>A whitespace-separated list of shell-style globs - matching the driver currently bound to the device, as - exposed by the udev property <literal>DRIVER</literal> - of its parent device, or if that is not set the driver - as exposed by <literal>ethtool -i</literal> of the - device itself.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Type=</varname></term> - <listitem> - <para>A whitespace-separated list of shell-style globs - matching the device type, as exposed by the udev property - <literal>DEVTYPE</literal>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Name=</varname></term> - <listitem> - <para>A whitespace-separated list of shell-style globs - matching the device name, as exposed by the udev property - <literal>INTERFACE</literal>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Host=</varname></term> - <listitem> - <para>Matches against the hostname or machine ID of the - host. See <literal>ConditionHost=</literal> in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Virtualization=</varname></term> - <listitem> - <para>Checks whether the system is executed in a virtualized - environment and optionally test whether it is a specific - implementation. See <literal>ConditionVirtualization=</literal> in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>KernelCommandLine=</varname></term> - <listitem> - <para>Checks whether a specific kernel command line option is - set (or if prefixed with the exclamation mark unset). See - <literal>ConditionKernelCommandLine=</literal> in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Architecture=</varname></term> - <listitem> - <para>Checks whether the system is running on a specific - architecture. See <literal>ConditionArchitecture=</literal> in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. - </para> - </listitem> - </varlistentry> - </variablelist> - - </refsect1> - - <refsect1> - <title>[Link] Section Options</title> - - <para> The <literal>[Link]</literal> section accepts the following keys:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>MACAddress=</varname></term> - <listitem> - <para>The hardware address to set for the device.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>MTUBytes=</varname></term> - <listitem> - <para>The maximum transmission unit in bytes to set for the - device. The usual suffixes K, M, G, are supported and are - understood to the base of 1024.</para> - <para>Note that if IPv6 is enabled on the interface, and the MTU is chosen - below 1280 (the minimum MTU for IPv6) it will automatically be increased to this value.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>[Network] Section Options</title> - - <para>The <literal>[Network]</literal> section accepts the following keys:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>Description=</varname></term> - <listitem> - <para>A description of the device. This is only used for - presentation purposes.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>DHCP=</varname></term> - <listitem> - <para>Enables DHCPv4 and/or DHCPv6 client support. Accepts - <literal>yes</literal>, <literal>no</literal>, - <literal>ipv4</literal>, or <literal>ipv6</literal>.</para> - - <para>Note that DHCPv6 will by default be triggered by Router - Advertisement, if that is enabled, regardless of this parameter. - By enabling DHCPv6 support explicitly, the DHCPv6 client will - be started regardless of the presence of routers on the link, - or what flags the routers pass. See - <literal>IPv6AcceptRouterAdvertisements=</literal>.</para> - - <para>Furthermore, note that by default the domain name - specified through DHCP is not used for name resolution. - See option <option>UseDomains=</option> below.</para> - - <para>See the <literal>[DHCP]</literal> section below for further configuration options for the DHCP client - support.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>DHCPServer=</varname></term> - <listitem> - <para>A boolean. Enables DHCPv4 server support. Defaults - to <literal>no</literal>. Further settings for the DHCP - server may be set in the <literal>[DHCPServer]</literal> - section described below.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>LinkLocalAddressing=</varname></term> - <listitem> - <para>Enables link-local address autoconfiguration. Accepts - <literal>yes</literal>, <literal>no</literal>, - <literal>ipv4</literal>, or <literal>ipv6</literal>. Defaults to - <literal>ipv6</literal>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>IPv4LLRoute=</varname></term> - <listitem> - <para>A boolean. When true, sets up the route needed for - non-IPv4LL hosts to communicate with IPv4LL-only hosts. Defaults - to false. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>IPv6Token=</varname></term> - <listitem> - <para>An IPv6 address with the top 64 bits unset. When set, indicates the - 64-bit interface part of SLAAC IPv6 addresses for this link. Note that - the token is only ever used for SLAAC, and not for DHCPv6 addresses, even - in the case DHCP is requested by router advertisement. By default, the - token is autogenerated.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>LLMNR=</varname></term> - <listitem> - <para>A boolean or <literal>resolve</literal>. When true, - enables <ulink - url="https://tools.ietf.org/html/rfc4795">Link-Local - Multicast Name Resolution</ulink> on the link. When set to - <literal>resolve</literal>, only resolution is enabled, - but not host registration and announcement. Defaults to - true. This setting is read by - <citerefentry><refentrytitle>systemd-resolved.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>MulticastDNS=</varname></term> - <listitem> - <para>A boolean or <literal>resolve</literal>. When true, - enables <ulink - url="https://tools.ietf.org/html/rfc6762">Multicast - DNS</ulink> support on the link. When set to - <literal>resolve</literal>, only resolution is enabled, - but not host or service registration and - announcement. Defaults to false. This setting is read by - <citerefentry><refentrytitle>systemd-resolved.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>DNSSEC=</varname></term> - <listitem> - <para>A boolean or - <literal>allow-downgrade</literal>. When true, enables - <ulink - url="https://tools.ietf.org/html/rfc4033">DNSSEC</ulink> - DNS validation support on the link. When set to - <literal>allow-downgrade</literal>, compatibility with - non-DNSSEC capable networks is increased, by automatically - turning off DNSEC in this case. This option defines a - per-interface setting for - <citerefentry><refentrytitle>resolved.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>'s - global <varname>DNSSEC=</varname> option. Defaults to - false. This setting is read by - <citerefentry><refentrytitle>systemd-resolved.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>DNSSECNegativeTrustAnchors=</varname></term> - <listitem><para>A space-separated list of DNSSEC negative - trust anchor domains. If specified and DNSSEC is enabled, - look-ups done via the interface's DNS server will be subject - to the list of negative trust anchors, and not require - authentication for the specified domains, or anything below - it. Use this to disable DNSSEC authentication for specific - private domains, that cannot be proven valid using the - Internet DNS hierarchy. Defaults to the empty list. This - setting is read by - <citerefentry><refentrytitle>systemd-resolved.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>LLDP=</varname></term> - <listitem> - <para>Controls support for Ethernet LLDP packet reception. LLDP is a link-layer protocol commonly - implemented on professional routers and bridges which announces which physical port a system is connected - to, as well as other related data. Accepts a boolean or the special value - <literal>routers-only</literal>. When true, incoming LLDP packets are accepted and a database of all LLDP - neighbors maintained. If <literal>routers-only</literal> is set only LLDP data of various types of routers - is collected and LLDP data about other types of devices ignored (such as stations, telephones and - others). If false, LLDP reception is disabled. Defaults to <literal>routers-only</literal>. Use - <citerefentry><refentrytitle>networkctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> to query the - collected neighbor data. LLDP is only available on Ethernet links. See <varname>EmitLLDP=</varname> below - for enabling LLDP packet emission from the local system. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>EmitLLDP=</varname></term> - <listitem> - <para>Controls support for Ethernet LLDP packet emission. Accepts a boolean parameter or the special values - <literal>nearest-bridge</literal>, <literal>non-tpmr-bridge</literal> and - <literal>customer-bridge</literal>. Defaults to false, which turns off LLDP packet emission. If not false, - a short LLDP packet with information about the local system is sent out in regular intervals on the - link. The LLDP packet will contain information about the local host name, the local machine ID (as stored - in <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>) and the - local interface name, as well as the pretty hostname of the system (as set in - <citerefentry><refentrytitle>machine-info</refentrytitle><manvolnum>5</manvolnum></citerefentry>). LLDP - emission is only available on Ethernet links. Note that this setting passes data suitable for - identification of host to the network and should thus not be enabled on untrusted networks, where such - identification data should not be made available. Use this option to permit other systems to identify on - which interfaces they are connected to this system. The three special values control propagation of the - LLDP packets. The <literal>nearest-bridge</literal> setting permits propagation only to the nearest - connected bridge, <literal>non-tpmr-bridge</literal> permits propagation across Two-Port MAC Relays, but - not any other bridges, and <literal>customer-bridge</literal> permits propagation until a customer bridge - is reached. For details about these concepts, see <ulink - url="http://standards.ieee.org/getieee802/download/802.1AB-2009.pdf">IEEE 802.1AB-2009</ulink>. Note that - configuring this setting to true is equivalent to <literal>nearest-bridge</literal>, the recommended and - most restricted level of propagation. See <varname>LLDP=</varname> above for an option to enable LLDP - reception.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>BindCarrier=</varname></term> - <listitem> - <para>A link name or a list of link names. When set, controls the behavior of the current - link. When all links in the list are in an operational down state, the current link is brought - down. When at least one link has carrier, the current interface is brought up. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Address=</varname></term> - <listitem> - <para>A static IPv4 or IPv6 address and its prefix length, - separated by a <literal>/</literal> character. Specify - this key more than once to configure several addresses. - The format of the address must be as described in - <citerefentry project='man-pages'><refentrytitle>inet_pton</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - This is a short-hand for an [Address] section only - containing an Address key (see below). This option may be - specified more than once. - </para> - - <para>If the specified address is 0.0.0.0 (for IPv4) or - [::] (for IPv6), a new address range of the requested size - is automatically allocated from a system-wide pool of - unused ranges. The allocated range is checked against all - current network interfaces and all known network - configuration files to avoid address range conflicts. The - default system-wide pool consists of 192.168.0.0/16, - 172.16.0.0/12 and 10.0.0.0/8 for IPv4, and fc00::/7 for - IPv6. This functionality is useful to manage a large - number of dynamically created network interfaces with the - same network configuration and automatic address range - assignment.</para> - - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Gateway=</varname></term> - <listitem> - <para>The gateway address, which must be in the format - described in - <citerefentry project='man-pages'><refentrytitle>inet_pton</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - This is a short-hand for a [Route] section only containing - a Gateway key. This option may be specified more than - once.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>DNS=</varname></term> - <listitem> - <para>A DNS server address, which must be in the format - described in - <citerefentry project='man-pages'><refentrytitle>inet_pton</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - This option may be specified more than once. This setting is read by - <citerefentry><refentrytitle>systemd-resolved.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Domains=</varname></term> - <listitem> - <para>The domains used for DNS host name resolution on this link. Takes a list of DNS domain names which - are used as search suffixes for extending single-label host names (host names containing no dots) to become - fully qualified domain names (FQDNs). If a single-label host name is resolved on this interface, each of - the specified search domains are appended to it in turn, converting it into a fully qualified domain name, - until one of them may be successfully resolved.</para> - - <para>The specified domains are also used for routing of DNS queries: look-ups for host names ending in the - domains specified here are preferably routed to the DNS servers configured for this interface. If a domain - name is prefixed with <literal>~</literal>, the domain name becomes a pure "routing" domain, is used for - DNS query routing purposes only and is not used in the described domain search logic. By specifying a - routing domain of <literal>~.</literal> (the tilde indicating definition of a routing domain, the dot - referring to the DNS root domain which is the implied suffix of all valid DNS names) it is possible to - route all DNS traffic preferably to the DNS server specified for this interface. The route domain logic is - particularly useful on multi-homed hosts with DNS servers serving particular private DNS zones on each - interface.</para> - - <para>This setting is read by - <citerefentry><refentrytitle>systemd-resolved.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>NTP=</varname></term> - <listitem> - <para>An NTP server address. This option may be specified more than once. This setting is read by - <citerefentry><refentrytitle>systemd-timesyncd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>IPForward=</varname></term> - <listitem><para>Configures IP packet forwarding for the - system. If enabled, incoming packets on any network - interface will be forwarded to any other interfaces - according to the routing table. Takes either a boolean - argument, or the values <literal>ipv4</literal> or - <literal>ipv6</literal>, which only enable IP packet - forwarding for the specified address family. This controls - the <filename>net.ipv4.ip_forward</filename> and - <filename>net.ipv6.conf.all.forwarding</filename> sysctl - options of the network interface (see <ulink - url="https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt">ip-sysctl.txt</ulink> - for details about sysctl options). Defaults to - <literal>no</literal>.</para> - - <para>Note: this setting controls a global kernel option, - and does so one way only: if a network that has this setting - enabled is set up the global setting is turned on. However, - it is never turned off again, even after all networks with - this setting enabled are shut down again.</para> - - <para>To allow IP packet forwarding only between specific - network interfaces use a firewall.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>IPMasquerade=</varname></term> - <listitem><para>Configures IP masquerading for the network - interface. If enabled, packets forwarded from the network - interface will be appear as coming from the local host. - Takes a boolean argument. Implies - <varname>IPForward=ipv4</varname>. Defaults to - <literal>no</literal>.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>IPv6PrivacyExtensions=</varname></term> - <listitem><para>Configures use of stateless temporary - addresses that change over time (see <ulink - url="https://tools.ietf.org/html/rfc4941">RFC 4941</ulink>, - Privacy Extensions for Stateless Address Autoconfiguration - in IPv6). Takes a boolean or the special values - <literal>prefer-public</literal> and - <literal>kernel</literal>. When true, enables the privacy - extensions and prefers temporary addresses over public - addresses. When <literal>prefer-public</literal>, enables the - privacy extensions, but prefers public addresses over - temporary addresses. When false, the privacy extensions - remain disabled. When <literal>kernel</literal>, the kernel's - default setting will be left in place. Defaults to - <literal>no</literal>.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>IPv6AcceptRouterAdvertisements=</varname></term> - <listitem><para>Force the setting of the <filename>accept_ra</filename> - (router advertisements) setting for the interface. - When unset, the kernel default is used, and router - advertisements are accepted only when local forwarding - is disabled for that interface. - When router advertisements are accepted, they will - trigger the start of the DHCPv6 client if the relevant - flags are passed, or if no routers are found on the link. - Takes a boolean. If true, router advertisements are - accepted, when false, router advertisements are ignored, - independently of the local forwarding state.</para> - - <para>See - <ulink url="https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt">ip-sysctl.txt</ulink> - in the kernel documentation, but note that systemd's - setting of <constant>1</constant> corresponds to - kernel's setting of <constant>2</constant>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>IPv6DuplicateAddressDetection=</varname></term> - <listitem><para>Configures the amount of IPv6 Duplicate - Address Detection (DAD) probes to send. Defaults to unset. - </para></listitem> - </varlistentry> - <varlistentry> - <term><varname>IPv6HopLimit=</varname></term> - <listitem><para>Configures IPv6 Hop Limit. For each router that - forwards the packet, the hop limit is decremented by 1. When the - hop limit field reaches zero, the packet is discarded. - Defaults to unset. - </para></listitem> - </varlistentry> - <varlistentry> - <term><varname>ProxyARP=</varname></term> - <listitem><para>A boolean. Configures proxy ARP. Proxy ARP is the technique in which one host, - usually a router, answers ARP requests intended for another machine. By "faking" its identity, - the router accepts responsibility for routing packets to the "real" destination. (see <ulink - url="https://tools.ietf.org/html/rfc1027">RFC 1027</ulink>. - Defaults to unset. - </para></listitem> - </varlistentry> - <varlistentry> - <term><varname>Bridge=</varname></term> - <listitem> - <para>The name of the bridge to add the link to.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Bond=</varname></term> - <listitem> - <para>The name of the bond to add the link to.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>VLAN=</varname></term> - <listitem> - <para>The name of a VLAN to create on the link. This - option may be specified more than once.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>MACVLAN=</varname></term> - <listitem> - <para>The name of a MACVLAN to create on the link. This - option may be specified more than once.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>VXLAN=</varname></term> - <listitem> - <para>The name of a VXLAN to create on the link. This - option may be specified more than once.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Tunnel=</varname></term> - <listitem> - <para>The name of a Tunnel to create on the link. This - option may be specified more than once.</para> - </listitem> - </varlistentry> - </variablelist> - - </refsect1> - - <refsect1> - <title>[Address] Section Options</title> - - <para>An <literal>[Address]</literal> section accepts the - following keys. Specify several <literal>[Address]</literal> - sections to configure several addresses.</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>Address=</varname></term> - <listitem> - <para>As in the <literal>[Network]</literal> section. This - key is mandatory.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Peer=</varname></term> - <listitem> - <para>The peer address in a point-to-point connection. - Accepts the same format as the <literal>Address</literal> - key.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Broadcast=</varname></term> - <listitem> - <para>The broadcast address, which must be in the format - described in - <citerefentry project='man-pages'><refentrytitle>inet_pton</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - This key only applies to IPv4 addresses. If it is not - given, it is derived from the <literal>Address</literal> - key.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Label=</varname></term> - <listitem> - <para>An address label.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>PreferredLifetime=</varname></term> - <listitem> - <para>Allows the default "preferred lifetime" of the address to be overridden. - Only three settings are accepted: <literal>forever</literal> or <literal>infinity</literal> - which is the default and means that the address never expires, and <literal>0</literal> which means - that the address is considered immediately "expired" and will not be used, - unless explicitly requested. A setting of PreferredLifetime=0 is useful for - addresses which are added to be used only by a specific application, - which is then configured to use them explicitly.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>[Route] Section Options</title> - <para>The <literal>[Route]</literal> section accepts the - following keys. Specify several <literal>[Route]</literal> - sections to configure several routes.</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>Gateway=</varname></term> - <listitem> - <para>As in the <literal>[Network]</literal> section.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Destination=</varname></term> - <listitem> - <para>The destination prefix of the route. Possibly - followed by a slash and the prefix length. If omitted, a - full-length host route is assumed.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Source=</varname></term> - <listitem> - <para>The source prefix of the route. Possibly followed by - a slash and the prefix length. If omitted, a full-length - host route is assumed.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Metric=</varname></term> - <listitem> - <para>The metric of the route (an unsigned integer).</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Scope=</varname></term> - <listitem> - <para>The scope of the route, which can be <literal>global</literal>, - <literal>link</literal> or <literal>host</literal>. Defaults to - <literal>global</literal>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>PreferredSource=</varname></term> - <listitem> - <para>The preferred source address of the route. The address - must be in the format described in - <citerefentry project='man-pages'><refentrytitle>inet_pton</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Table=<replaceable>num</replaceable></varname></term> - <listitem> - <para>The table identifier for the route (a number between 1 and 4294967295, or 0 to unset). - The table can be retrieved using <command>ip route show table <replaceable>num</replaceable></command>. - </para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>[DHCP] Section Options</title> - <para>The <literal>[DHCP]</literal> section configures the - DHCPv4 and DHCP6 client, if it is enabled with the - <varname>DHCP=</varname> setting described above:</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>UseDNS=</varname></term> - <listitem> - <para>When true (the default), the DNS servers received - from the DHCP server will be used and take precedence over - any statically configured ones.</para> - - <para>This corresponds to the <option>nameserver</option> - option in <citerefentry - project='man-pages'><refentrytitle>resolv.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>UseNTP=</varname></term> - <listitem> - <para>When true (the default), the NTP servers received - from the DHCP server will be used by systemd-timesyncd - and take precedence over any statically configured ones.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>UseMTU=</varname></term> - <listitem> - <para>When true, the interface maximum transmission unit - from the DHCP server will be used on the current link. - Defaults to false.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>SendHostname=</varname></term> - <listitem> - <para>When true (the default), the machine's hostname will - be sent to the DHCP server.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>UseHostname=</varname></term> - <listitem> - <para>When true (the default), the hostname received from - the DHCP server will be set as the transient hostname of the system - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Hostname=</varname></term> - <listitem> - <para>Use this value for the hostname which is sent to the - DHCP server, instead of machine's hostname.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>UseDomains=</varname></term> - <listitem> - <para>Takes a boolean argument, or the special value <literal>route</literal>. When true, the domain name - received from the DHCP server will be used as DNS search domain over this link, similar to the effect of - the <option>Domains=</option> setting. If set to <literal>route</literal>, the domain name received from - the DHCP server will be used for routing DNS queries only, but not for searching, similar to the effect of - the <option>Domains=</option> setting when the argument is prefixed with <literal>~</literal>. Defaults to - false.</para> - - <para>It is recommended to enable this option only on trusted networks, as setting this affects resolution - of all host names, in particular to single-label names. It is generally safer to use the supplied domain - only as routing domain, rather than as search domain, in order to not have it affect local resolution of - single-label names.</para> - - <para>When set to true, this setting corresponds to the <option>domain</option> option in <citerefentry - project='man-pages'><refentrytitle>resolv.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>UseRoutes=</varname></term> - <listitem> - <para>When true (the default), the static routes will be - requested from the DHCP server and added to the routing - table with a metric of 1024.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>UseTimezone=</varname></term> - - <listitem><para>When true, the timezone received from the - DHCP server will be set as timezone of the local - system. Defaults to <literal>no</literal>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>CriticalConnection=</varname></term> - <listitem> - <para>When true, the connection will never be torn down - even if the DHCP lease expires. This is contrary to the - DHCP specification, but may be the best choice if, say, - the root filesystem relies on this connection. Defaults to - false.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>ClientIdentifier=</varname></term> - <listitem> - <para>The DHCPv4 client identifier to use. Either <literal>mac</literal> to use the MAC address of the link - or <literal>duid</literal> (the default, see below) to use a RFC4361-compliant Client ID.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>VendorClassIdentifier=</varname></term> - <listitem> - <para>The vendor class identifier used to identify vendor - type and configuration.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>DUIDType=</varname></term> - <listitem> - <para>Override the global <varname>DUIDType</varname> setting for this network. See - <citerefentry><refentrytitle>networkd.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for a description of possible values.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>DUIDRawData=</varname></term> - <listitem> - <para>Override the global <varname>DUIDRawData</varname> setting for this network. See - <citerefentry><refentrytitle>networkd.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for a description of possible values.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>IAID=</varname></term> - <listitem> - <para>The DHCP Identity Association Identifier (IAID) for the interface, a 32-bit unsigned integer.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>RequestBroadcast=</varname></term> - <listitem> - <para>Request the server to use broadcast messages before - the IP address has been configured. This is necessary for - devices that cannot receive RAW packets, or that cannot - receive packets at all before an IP address has been - configured. On the other hand, this must not be enabled on - networks where broadcasts are filtered out.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>RouteMetric=</varname></term> - <listitem> - <para>Set the routing metric for routes specified by the - DHCP server.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>[DHCPServer] Section Options</title> - <para>The <literal>[DHCPServer]</literal> section contains - settings for the DHCP server, if enabled via the - <varname>DHCPServer=</varname> option described above:</para> - - <variablelist class='network-directives'> - - <varlistentry> - <term><varname>PoolOffset=</varname></term> - <term><varname>PoolSize=</varname></term> - - <listitem><para>Configures the pool of addresses to hand out. The pool - is a contiguous sequence of IP addresses in the subnet configured for - the server address, which does not include the subnet nor the broadcast - address. <varname>PoolOffset=</varname> takes the offset of the pool - from the start of subnet, or zero to use the default value. - <varname>PoolSize=</varname> takes the number of IP addresses in the - pool or zero to use the default value. By default, the pool starts at - the first address after the subnet address and takes up the rest of - the subnet, excluding the broadcast address. If the pool includes - the server address (the default), this is reserved and not handed - out to clients.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DefaultLeaseTimeSec=</varname></term> - <term><varname>MaxLeaseTimeSec=</varname></term> - - <listitem><para>Control the default and maximum DHCP lease - time to pass to clients. These settings take time values in seconds or - another common time unit, depending on the suffix. The default - lease time is used for clients that did not ask for a specific - lease time. If a client asks for a lease time longer than the - maximum lease time, it is automatically shortened to the - specified time. The default lease time defaults to 1h, the - maximum lease time to 12h. Shorter lease times are beneficial - if the configuration data in DHCP leases changes frequently - and clients shall learn the new settings with shorter - latencies. Longer lease times reduce the generated DHCP - network traffic.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>EmitDNS=</varname></term> - <term><varname>DNS=</varname></term> - - <listitem><para>Configures whether the DHCP leases handed out - to clients shall contain DNS server information. The - <varname>EmitDNS=</varname> setting takes a boolean argument - and defaults to <literal>yes</literal>. The DNS servers to - pass to clients may be configured with the - <varname>DNS=</varname> option, which takes a list of IPv4 - addresses. If the <varname>EmitDNS=</varname> option is - enabled but no servers configured, the servers are - automatically propagated from an "uplink" interface that has - appropriate servers set. The "uplink" interface is determined - by the default route of the system with the highest - priority. Note that this information is acquired at the time - the lease is handed out, and does not take uplink interfaces - into account that acquire DNS or NTP server information at a - later point. DNS server propagation does not take - <filename>/etc/resolv.conf</filename> into account. Also, note - that the leases are not refreshed if the uplink network - configuration changes. To ensure clients regularly acquire the - most current uplink DNS server information, it is thus - advisable to shorten the DHCP lease time via - <varname>MaxLeaseTimeSec=</varname> described - above.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>EmitNTP=</varname></term> - <term><varname>NTP=</varname></term> - - <listitem><para>Similar to the <varname>EmitDNS=</varname> and - <varname>DNS=</varname> settings described above, these - settings configure whether and what NTP server information - shall be emitted as part of the DHCP lease. The same syntax, - propagation semantics and defaults apply as for - <varname>EmitDNS=</varname> and - <varname>DNS=</varname>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>EmitRouter=</varname></term> - - <listitem><para>Similar to the <varname>EmitDNS=</varname> - setting described above, this setting configures whether the - DHCP lease should contain the router option. The same syntax, - propagation semantics and defaults apply as for - <varname>EmitDNS=</varname>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>EmitTimezone=</varname></term> - <term><varname>Timezone=</varname></term> - - <listitem><para>Configures whether the DHCP leases handed out - to clients shall contain timezone information. The - <varname>EmitTimezone=</varname> setting takes a boolean - argument and defaults to <literal>yes</literal>. The - <varname>Timezone=</varname> setting takes a timezone string - (such as <literal>Europe/Berlin</literal> or - <literal>UTC</literal>) to pass to clients. If no explicit - timezone is set, the system timezone of the local host is - propagated, as determined by the - <filename>/etc/localtime</filename> symlink.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>[Bridge] Section Options</title> - <para>The <literal>[Bridge]</literal> section accepts the - following keys.</para> - <variablelist class='network-directives'> - <varlistentry> - <term><varname>UnicastFlood=</varname></term> - <listitem> - <para>A boolean. Controls whether the bridge should flood - traffic for which an FDB entry is missing and the destination - is unknown through this port. Defaults to on. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>HairPin=</varname></term> - <listitem> - <para>A boolean. Configures whether traffic may be sent back - out of the port on which it was received. By default, this - flag is false, and the bridge will not forward traffic back - out of the receiving port.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>UseBPDU=</varname></term> - <listitem> - <para>A boolean. Configures whether STP Bridge Protocol Data Units will be - processed by the bridge port. Defaults to yes.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>FastLeave=</varname></term> - <listitem> - <para>A boolean. This flag allows the bridge to immediately stop multicast - traffic on a port that receives an IGMP Leave message. It is only used with - IGMP snooping if enabled on the bridge. Defaults to off.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>AllowPortToBeRoot=</varname></term> - <listitem> - <para>A boolean. Configures whether a given port is allowed to - become a root port. Only used when STP is enabled on the bridge. - Defaults to on.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>Cost=</varname></term> - <listitem> - <para>Sets the "cost" of sending packets of this interface. - Each port in a bridge may have a different speed and the cost - is used to decide which link to use. Faster interfaces - should have lower costs.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - <refsect1> - <title>[BridgeFDB] Section Options</title> - <para>The <literal>[BridgeFDB]</literal> section manages the - forwarding database table of a port and accepts the following - keys. Specify several <literal>[BridgeFDB]</literal> sections to - configure several static MAC table entries.</para> - - <variablelist class='network-directives'> - <varlistentry> - <term><varname>MACAddress=</varname></term> - <listitem> - <para>As in the <literal>[Network]</literal> section. This - key is mandatory.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>VLANId=</varname></term> - <listitem> - <para>The VLAN ID for the new static MAC table entry. If - omitted, no VLAN ID info is appended to the new static MAC - table entry.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Example</title> - <example> - <title>/etc/systemd/network/50-static.network</title> - - <programlisting>[Match] -Name=enp2s0 - -[Network] -Address=192.168.0.15/24 -Gateway=192.168.0.1</programlisting> - </example> - - <example> - <title>/etc/systemd/network/80-dhcp.network</title> - - <programlisting>[Match] -Name=en* - -[Network] -DHCP=yes</programlisting> - </example> - - <example> - <title>/etc/systemd/network/25-bridge-static.network</title> - - <programlisting>[Match] -Name=bridge0 - -[Network] -Address=192.168.0.15/24 -Gateway=192.168.0.1 -DNS=192.168.0.1</programlisting> - </example> - - <example> - <title>/etc/systemd/network/25-bridge-slave-interface.network</title> - - <programlisting>[Match] -Name=enp2s0 - -[Network] -Bridge=bridge0</programlisting> - </example> - <example> - <title>/etc/systemd/network/25-ipip.network</title> - - <programlisting>[Match] -Name=em1 - -[Network] -Tunnel=ipip-tun</programlisting> - </example> - - <example> - <title>/etc/systemd/network/25-sit.network</title> - - <programlisting>[Match] -Name=em1 - -[Network] -Tunnel=sit-tun</programlisting> - </example> - - <example> - <title>/etc/systemd/network/25-gre.network</title> - - <programlisting>[Match] -Name=em1 - -[Network] -Tunnel=gre-tun</programlisting> - </example> - - <example> - <title>/etc/systemd/network/25-vti.network</title> - - <programlisting>[Match] -Name=em1 - -[Network] -Tunnel=vti-tun</programlisting> - </example> - - <example> - <title>/etc/systemd/network/25-bond.network</title> - - <programlisting>[Match] -Name=bond1 - -[Network] -DHCP=yes -</programlisting> - </example> - - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.link</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.netdev</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-resolved.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.nspawn.xml b/man/systemd.nspawn.xml deleted file mode 100644 index 3683412c14..0000000000 --- a/man/systemd.nspawn.xml +++ /dev/null @@ -1,454 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ -<!ENTITY % entities SYSTEM "custom-entities.ent" > -%entities; -]> - -<!-- - This file is part of systemd. - - Copyright 2015 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.nspawn"> - - <refentryinfo> - <title>systemd.nspawn</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.nspawn</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.nspawn</refname> - <refpurpose>Container settings</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/systemd/nspawn/<replaceable>machine</replaceable>.nspawn</filename></para> - <para><filename>/run/systemd/nspawn/<replaceable>machine</replaceable>.nspawn</filename></para> - <para><filename>/var/lib/machines/<replaceable>machine</replaceable>.nspawn</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>An nspawn container settings file (suffix - <filename>.nspawn</filename>) encodes additional runtime - information about a local container, and is searched, read and - used by - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry> - when starting a container. Files of this type are named after the - containers they define settings for. They are optional, and only - required for containers whose execution environment shall differ - from the defaults. Files of this type mostly contain settings that - may also be set on the <command>systemd-nspawn</command> command - line, and make it easier to persistently attach specific settings - to specific containers. The syntax of these files is inspired by - <filename>.desktop</filename> files following the <ulink - url="http://standards.freedesktop.org/desktop-entry-spec/latest/">XDG - Desktop Entry Specification</ulink>, which in turn are inspired by - Microsoft Windows <filename>.ini</filename> files.</para> - - <para>Boolean arguments used in these settings files can be - written in various formats. For positive settings, the strings - <option>1</option>, <option>yes</option>, <option>true</option> - and <option>on</option> are equivalent. For negative settings, the - strings <option>0</option>, <option>no</option>, - <option>false</option> and <option>off</option> are - equivalent.</para> - - <para>Empty lines and lines starting with # or ; are - ignored. This may be used for commenting. Lines ending - in a backslash are concatenated with the following - line while reading and the backslash is replaced by a - space character. This may be used to wrap long lines.</para> - - </refsect1> - - <refsect1> - <title><filename>.nspawn</filename> File Discovery</title> - - <para>Files are searched by appending the - <filename>.nspawn</filename> suffix to the machine name of the - container, as specified with the <option>--machine=</option> - switch of <command>systemd-nspawn</command>, or derived from the - directory or image file name. This file is first searched in - <filename>/etc/systemd/nspawn/</filename> and - <filename>/run/systemd/nspawn/</filename>. If found in these - directories, its settings are read and all of them take full effect - (but are possibly overridden by corresponding command line - arguments). If not found, the file will then be searched next to - the image file or in the immediate parent of the root directory of - the container. If the file is found there, only a subset of the - settings will take effect however. All settings that possibly - elevate privileges or grant additional access to resources of the - host (such as files or directories) are ignored. To which options - this applies is documented below.</para> - - <para>Persistent settings files created and maintained by the - administrator (and thus trusted) should be placed in - <filename>/etc/systemd/nspawn/</filename>, while automatically - downloaded (and thus potentially untrusted) settings files are - placed in <filename>/var/lib/machines/</filename> instead (next to - the container images), where their security impact is limited. In - order to add privileged settings to <filename>.nspawn</filename> - files acquired from the image vendor, it is recommended to copy the - settings files into <filename>/etc/systemd/nspawn/</filename> and - edit them there, so that the privileged options become - available. The precise algorithm for how the files are searched and - interpreted may be configured with - <command>systemd-nspawn</command>'s <option>--settings=</option> - switch, see - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry> - for details.</para> - </refsect1> - - <refsect1> - <title>[Exec] Section Options</title> - - <para>Settings files may include an <literal>[Exec]</literal> - section, which carries various execution parameters:</para> - - <variablelist> - - <varlistentry> - <term><varname>Boot=</varname></term> - - <listitem><para>Takes a boolean argument, which defaults to off. If enabled, <command>systemd-nspawn</command> - will automatically search for an <filename>init</filename> executable and invoke it. In this case, the - specified parameters using <varname>Parameters=</varname> are passed as additional arguments to the - <filename>init</filename> process. This setting corresponds to the <option>--boot</option> switch on the - <command>systemd-nspawn</command> command line. This option may not be combined with - <varname>ProcessTwo=yes</varname>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ProcessTwo=</varname></term> - - <listitem><para>Takes a boolean argument, which defaults to off. If enabled, the specified program is run as - PID 2. A stub init process is run as PID 1. This setting corresponds to the <option>--as-pid2</option> switch - on the <command>systemd-nspawn</command> command line. This option may not be combined with - <varname>Boot=yes</varname>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Parameters=</varname></term> - - <listitem><para>Takes a space-separated list of - arguments. This is either a command line, beginning with the - binary name to execute, or – if <varname>Boot=</varname> is - enabled – the list of arguments to pass to the init - process. This setting corresponds to the command line - parameters passed on the <command>systemd-nspawn</command> - command line.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Environment=</varname></term> - - <listitem><para>Takes an environment variable assignment - consisting of key and value, separated by - <literal>=</literal>. Sets an environment variable for the - main process invoked in the container. This setting may be - used multiple times to set multiple environment variables. It - corresponds to the <option>--setenv=</option> command line - switch.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>User=</varname></term> - - <listitem><para>Takes a UNIX user name. Specifies the user - name to invoke the main process of the container as. This user - must be known in the container's user database. This - corresponds to the <option>--user=</option> command line - switch.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>WorkingDirectory=</varname></term> - - <listitem><para>Selects the working directory for the process invoked in the container. Expects an absolute - path in the container's file system namespace. This corresponds to the <option>--chdir=</option> command line - switch.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Capability=</varname></term> - <term><varname>DropCapability=</varname></term> - - <listitem><para>Takes a space-separated list of Linux process - capabilities (see - <citerefentry project='man-pages'><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details). The <varname>Capability=</varname> setting - specifies additional capabilities to pass on top of the - default set of capabilities. The - <varname>DropCapability=</varname> setting specifies - capabilities to drop from the default set. These settings - correspond to the <option>--capability=</option> and - <option>--drop-capability=</option> command line - switches. Note that <varname>Capability=</varname> is a - privileged setting, and only takes effect in - <filename>.nspawn</filename> files in - <filename>/etc/systemd/nspawn/</filename> and - <filename>/run/system/nspawn/</filename> (see above). On the - other hand, <varname>DropCapability=</varname> takes effect in - all cases.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>KillSignal=</varname></term> - - <listitem><para>Specify the process signal to send to the - container's PID 1 when nspawn itself receives SIGTERM, in - order to trigger an orderly shutdown of the container. - Defaults to SIGRTMIN+3 if <option>Boot=</option> is used - (on systemd-compatible init systems SIGRTMIN+3 triggers an - orderly shutdown). For a list of valid signals, see - <citerefentry project='man-pages'><refentrytitle>signal</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Personality=</varname></term> - - <listitem><para>Configures the kernel personality for the - container. This is equivalent to the - <option>--personality=</option> switch.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>MachineID=</varname></term> - - <listitem><para>Configures the 128-bit machine ID (UUID) to pass to - the container. This is equivalent to the - <option>--uuid=</option> command line switch. This option is - privileged (see above). </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>PrivateUsers=</varname></term> - - <listitem><para>Configures support for usernamespacing. This is equivalent to the - <option>--private-users=</option> command line switch, and takes the same options. This option is privileged - (see above). </para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>[Files] Section Options</title> - - <para>Settings files may include a <literal>[Files]</literal> - section, which carries various parameters configuring the file - system of the container:</para> - - <variablelist> - - <varlistentry> - <term><varname>ReadOnly=</varname></term> - - <listitem><para>Takes a boolean argument, which defaults to off. If - specified, the container will be run with a read-only file - system. This setting corresponds to the - <option>--read-only</option> command line - switch.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Volatile=</varname></term> - - <listitem><para>Takes a boolean argument, or the special value - <literal>state</literal>. This configures whether to run the - container with volatile state and/or configuration. This - option is equivalent to <option>--volatile=</option>, see - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry> - for details about the specific options - supported.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Bind=</varname></term> - <term><varname>BindReadOnly=</varname></term> - - <listitem><para>Adds a bind mount from the host into the - container. Takes a single path, a pair of two paths separated - by a colon, or a triplet of two paths plus an option string - separated by colons. This option may be used multiple times to - configure multiple bind mounts. This option is equivalent to - the command line switches <option>--bind=</option> and - <option>--bind-ro=</option>, see - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry> - for details about the specific options supported. This setting - is privileged (see above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>TemporaryFileSystem=</varname></term> - - <listitem><para>Adds a <literal>tmpfs</literal> mount to the - container. Takes a path or a pair of path and option string, - separated by a colon. This option may be used multiple times to - configure multiple <literal>tmpfs</literal> mounts. This - option is equivalent to the command line switch - <option>--tmpfs=</option>, see - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry> - for details about the specific options supported. This setting - is privileged (see above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>PrivateUsersChown=</varname></term> - - <listitem><para>Configures whether the ownership of the files and directories in the container tree shall be - adjusted to the UID/GID range used, if necessary and user namespacing is enabled. This is equivalent to the - <option>--private-users-chown</option> command line switch. This option is privileged (see - above). </para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>[Network] Section Options</title> - - <para>Settings files may include a <literal>[Network]</literal> - section, which carries various parameters configuring the network - connectivity of the container:</para> - - <variablelist> - - <varlistentry> - <term><varname>Private=</varname></term> - - <listitem><para>Takes a boolean argument, which defaults to off. If - enabled, the container will run in its own network namespace - and not share network interfaces and configuration with the - host. This setting corresponds to the - <option>--private-network</option> command line - switch.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>VirtualEthernet=</varname></term> - - <listitem><para>Takes a boolean argument. Configures whether - to create a virtual Ethernet connection - (<literal>veth</literal>) between host and the container. This - setting implies <varname>Private=yes</varname>. This setting - corresponds to the <option>--network-veth</option> command - line switch. This option is privileged (see - above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>VirtualEthernetExtra=</varname></term> - - <listitem><para>Takes a colon-separated pair of interface - names. Configures an additional virtual Ethernet connection - (<literal>veth</literal>) between host and the container. The - first specified name is the interface name on the host, the - second the interface name in the container. The latter may be - omitted in which case it is set to the same name as the host - side interface. This setting implies - <varname>Private=yes</varname>. This setting corresponds to - the <option>--network-veth-extra=</option> command line - switch, and maybe be used multiple times. It is independent of - <varname>VirtualEthernet=</varname>. This option is privileged - (see above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Interface=</varname></term> - - <listitem><para>Takes a space-separated list of interfaces to - add to the container. This option corresponds to the - <option>--network-interface=</option> command line switch and - implies <varname>Private=yes</varname>. This option is - privileged (see above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>MACVLAN=</varname></term> - <term><varname>IPVLAN=</varname></term> - - <listitem><para>Takes a space-separated list of interfaces to - add MACLVAN or IPVLAN interfaces to, which are then added to - the container. These options correspond to the - <option>--network-macvlan=</option> and - <option>--network-ipvlan=</option> command line switches and - imply <varname>Private=yes</varname>. These options are - privileged (see above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Bridge=</varname></term> - - <listitem><para>Takes an interface name. This setting implies - <varname>VirtualEthernet=yes</varname> and - <varname>Private=yes</varname> and has the effect that the - host side of the created virtual Ethernet link is connected to - the specified bridge interface. This option corresponds to the - <option>--network-bridge=</option> command line switch. This - option is privileged (see above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Zone=</varname></term> - - <listitem><para>Takes a network zone name. This setting implies <varname>VirtualEthernet=yes</varname> and - <varname>Private=yes</varname> and has the effect that the host side of the created virtual Ethernet link is - connected to an automatically managed bridge interface named after the passed argument, prefixed with - <literal>vz-</literal>. This option corresponds to the <option>--network-zone=</option> command line - switch. This option is privileged (see above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Port=</varname></term> - - <listitem><para>Exposes a TCP or UDP port of the container on - the host. This option corresponds to the - <option>--port=</option> command line switch, see - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry> - for the precise syntax of the argument this option takes. This - option is privileged (see above).</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-nspawn</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.offline-updates.xml b/man/systemd.offline-updates.xml deleted file mode 100644 index 946234ad90..0000000000 --- a/man/systemd.offline-updates.xml +++ /dev/null @@ -1,169 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2013 Lennart Poettering - Copyright 2016 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.offline-updates"> - <refentryinfo> - <title>systemd.offline-updates</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.offline-updates</refentrytitle> - <manvolnum>7</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.offline-updates</refname> - <refpurpose>Implementation of offline updates in systemd</refpurpose> - </refnamediv> - - <refsect1> - <title>Implementing Offline System Updates</title> - - <para>This man page describes how to implement "offline" system updates with systemd. By "offline" - OS updates we mean package installations and updates that are run with the system booted into a - special system update mode, in order to avoid problems related to conflicts of libraries and - services that are currently running with those on disk. This document is inspired by this - <ulink url="https://wiki.gnome.org/Design/OS/SoftwareUpdates">GNOME design whiteboard</ulink>. - </para> - - <para>The logic:</para> - - <orderedlist> - <listitem> - <para>The package manager prepares system updates by downloading all (RPM or DEB or - whatever) packages to update off-line in a special directory - <filename noindex="true">/var/lib/system-update</filename> (or - another directory of the package/upgrade manager's choice).</para> - </listitem> - - <listitem> - <para>When the user OK'ed the update, the symlink <filename>/system-update</filename> is - created that points to <filename noindex="true">/var/lib/system-update</filename> (or - wherever the directory with the upgrade files is located) and the system is rebooted. This - symlink is in the root directory, since we need to check for it very early at boot, at a - time where <filename>/var</filename> is not available yet.</para> - </listitem> - - <listitem> - <para>Very early in the new boot - <citerefentry><refentrytitle>systemd-update-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry> - checks whether <filename>/system-update</filename> exists. If so, it (temporarily and for - this boot only) redirects (i.e. symlinks) <filename>default.target</filename> to - <filename>system-update.target</filename>, a special target that is pulls in the base system - (i.e. <filename>sysinit.target</filename>, so that all file systems are mounted but little - else) and the system update units.</para> - </listitem> - - <listitem> - <para>The system now continues to boot into <filename>default.target</filename>, and thus - into <filename>system-update.target</filename>. This target pulls in the system update unit, - which starts the system update script after all file systems have been mounted.</para> - </listitem> - - <listitem> - <para>As the first step, the update script should check if the - <filename>/system-update</filename> symlink points to the the location used by that update - script. In case it does not exists or points to a different location, the script must exit - without error. It is possible for multiple update services to be installed, and for multiple - update scripts to be launched in parallel, and only the one that corresponds to the tool - that <emphasis>created</emphasis> the symlink before reboot should perform any actions. It - is unsafe to run multiple updates in parallel.</para> - </listitem> - - <listitem> - <para>The update script should now do its job. If applicable and possible, it should - create a file system snapshot, then install all packages. - After completion (regardless whether the update succeeded or failed) the machine - must be rebooted, for example by calling <command>systemctl reboot</command>. - In addition, on failure the script should revert to the old file system snapshot - (without the symlink).</para> - </listitem> - - <listitem> - <para>The system is rebooted. Since the <filename>/system-update</filename> symlink is gone, - the generator won't redirect <filename>default.target</filename> after reboot and the - system now boots into the default target again.</para> - </listitem> - </orderedlist> - </refsect1> - - <refsect1> - <title>Recommendations</title> - - <orderedlist> - <listitem> - <para>To make things a bit more robust we recommend hooking the update script into - <filename>system-update.target</filename> via a <filename noindex='true'>.wants/</filename> - symlink in the distribution package, rather than depending on <command>systemctl - enable</command> in the postinst scriptlets of your package. More specifically, for your - update script create a .service file, without [Install] section, and then add a symlink like - <filename noindex='true'>/usr/lib/systemd/system-update.target.wants/foobar.service</filename> - → <filename noindex='true'>../foobar.service</filename> to your package.</para> - </listitem> - - <listitem> - <para>Make sure to remove the <filename>/system-update</filename> symlink as early as - possible in the update script to avoid reboot loops in case the update fails.</para> - </listitem> - - <listitem> - <para>Use <varname>FailureAction=reboot</varname> in the service file for your update script - to ensure that a reboot is automatically triggered if the update fails. - <varname>FailureAction=</varname> makes sure that the specified unit is activated if your - script exits uncleanly (by non-zero error code, or signal/coredump). If your script succeeds - you should trigger the reboot in your own code, for example by invoking logind's - <command>Reboot()</command> call or calling <command>systemct reboot</command>. See - <ulink url="http://www.freedesktop.org/wiki/Software/systemd/logind">logind dbus API</ulink> - for details.</para> - </listitem> - - <listitem> - <para>The update service should declare <varname>DefaultDependencies=false</varname>, - and pull in any services it requires explicitly.</para> - </listitem> - </orderedlist> - </refsect1> - - <refsect1> - <title>See also</title> - - <para> - <ulink url="http://www.freedesktop.org/wiki/Software/systemd/SystemUpdates/">Implementing Offline System Updates</ulink>, - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-update-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>dnf.plugin.system-upgrade</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> -</refentry> diff --git a/man/systemd.path.xml b/man/systemd.path.xml deleted file mode 100644 index 7200c8fe27..0000000000 --- a/man/systemd.path.xml +++ /dev/null @@ -1,202 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.path"> - <refentryinfo> - <title>systemd.path</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.path</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.path</refname> - <refpurpose>Path unit configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>path</replaceable>.path</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>A unit configuration file whose name ends in - <literal>.path</literal> encodes information about a path - monitored by systemd, for path-based activation.</para> - - <para>This man page lists the configuration options specific to - this unit type. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for the common options of all unit configuration files. The common - configuration items are configured in the generic [Unit] and - [Install] sections. The path specific configuration options are - configured in the [Path] section.</para> - - <para>For each path file, a matching unit file must exist, - describing the unit to activate when the path changes. By default, - a service by the same name as the path (except for the suffix) is - activated. Example: a path file <filename>foo.path</filename> - activates a matching service <filename>foo.service</filename>. The - unit to activate may be controlled by <varname>Unit=</varname> - (see below).</para> - - <para>Internally, path units use the - <citerefentry project='man-pages'><refentrytitle>inotify</refentrytitle><manvolnum>7</manvolnum></citerefentry> - API to monitor file systems. Due to that, it suffers by the same - limitations as inotify, and for example cannot be used to monitor - files or directories changed by other machines on remote NFS file - systems.</para> - </refsect1> - - <refsect1> - <title>Automatic Dependencies</title> - - <para>If a path unit is beneath another mount unit in the file - system hierarchy, both a requirement and an ordering dependency - between both units are created automatically.</para> - - <para>An implicit <varname>Before=</varname> dependency is added - between a path unit and the unit it is supposed to activate.</para> - - <para>Unless <varname>DefaultDependencies=false</varname> in the <literal>[Unit]</literal> section is used, path - units will implicitly have dependencies of type <varname>Before=</varname> on <filename>paths.target</filename>, - dependencies of type <varname>After=</varname> and <varname>Requires=</varname> on - <filename>sysinit.target</filename>, and have dependencies of type <varname>Conflicts=</varname> and - <varname>Before=</varname> on <filename>shutdown.target</filename>. These ensure that path units are terminated - cleanly prior to system shutdown. Only path units involved with early boot or late system shutdown should disable - this option. - </para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>Path files must include a [Path] section, which carries - information about the path(s) it monitors. The options specific to - the [Path] section of path units are the following:</para> - - <variablelist class='unit-directives'> - <varlistentry> - <term><varname>PathExists=</varname></term> - <term><varname>PathExistsGlob=</varname></term> - <term><varname>PathChanged=</varname></term> - <term><varname>PathModified=</varname></term> - <term><varname>DirectoryNotEmpty=</varname></term> - - <listitem><para>Defines paths to monitor for certain changes: - <varname>PathExists=</varname> may be used to watch the mere - existence of a file or directory. If the file specified - exists, the configured unit is activated. - <varname>PathExistsGlob=</varname> works similar, but checks - for the existence of at least one file matching the globbing - pattern specified. <varname>PathChanged=</varname> may be used - to watch a file or directory and activate the configured unit - whenever it changes. It is not activated on every write to the - watched file but it is activated if the file which was open - for writing gets closed. <varname>PathModified=</varname> is - similar, but additionally it is activated also on simple - writes to the watched file. - <varname>DirectoryNotEmpty=</varname> may be used to watch a - directory and activate the configured unit whenever it - contains at least one file.</para> - - <para>The arguments of these directives must be absolute file - system paths.</para> - - <para>Multiple directives may be combined, of the same and of - different types, to watch multiple paths. If the empty string - is assigned to any of these options, the list of paths to - watch is reset, and any prior assignments of these options - will not have any effect.</para> - - <para>If a path already exists (in case of - <varname>PathExists=</varname> and - <varname>PathExistsGlob=</varname>) or a directory already is - not empty (in case of <varname>DirectoryNotEmpty=</varname>) - at the time the path unit is activated, then the configured - unit is immediately activated as well. Something similar does - not apply to <varname>PathChanged=</varname> and - <varname>PathModified=</varname>.</para> - - <para>If the path itself or any of the containing directories - are not accessible, <command>systemd</command> will watch for - permission changes and notice that conditions are satisfied - when permissions allow that. </para></listitem> - </varlistentry> - <varlistentry> - <term><varname>Unit=</varname></term> - - <listitem><para>The unit to activate when any of the - configured paths changes. The argument is a unit name, whose - suffix is not <literal>.path</literal>. If not specified, this - value defaults to a service that has the same name as the path - unit, except for the suffix. (See above.) It is recommended - that the unit name that is activated and the unit name of the - path unit are named identical, except for the - suffix.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>MakeDirectory=</varname></term> - - <listitem><para>Takes a boolean argument. If true, the - directories to watch are created before watching. This option - is ignored for <varname>PathExists=</varname> settings. - Defaults to <option>false</option>.</para></listitem> - </varlistentry> - <varlistentry> - <term><varname>DirectoryMode=</varname></term> - - <listitem><para>If <varname>MakeDirectory=</varname> is - enabled, use the mode specified here to create the directories - in question. Takes an access mode in octal notation. Defaults - to <option>0755</option>.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>inotify</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.preset.xml b/man/systemd.preset.xml deleted file mode 100644 index b7164014f0..0000000000 --- a/man/systemd.preset.xml +++ /dev/null @@ -1,189 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2011 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="systemd.preset"> - - <refentryinfo> - <title>systemd.preset</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.preset</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.preset</refname> - <refpurpose>Service enablement presets</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/systemd/system-preset/*.preset</filename></para> - <para><filename>/run/systemd/system-preset/*.preset</filename></para> - <para><filename>/usr/lib/systemd/system-preset/*.preset</filename></para> - <para><filename>/etc/systemd/user-preset/*.preset</filename></para> - <para><filename>/run/systemd/user-preset/*.preset</filename></para> - <para><filename>/usr/lib/systemd/user-preset/*.preset</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>Preset files may be used to encode policy which units shall - be enabled by default and which ones shall be disabled. They are - read by <command>systemctl preset</command> (for more information - see - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>) - which uses this information to enable or disable a unit according - to preset policy. <command>systemctl preset</command> is used by - the post install scriptlets of RPM packages (or other OS package - formats), to enable/disable specific units by default on package - installation, enforcing distribution, spin or administrator preset - policy. This allows choosing a certain set of units to be - enabled/disabled even before installing the actual package.</para> - - <para>For more information on the preset logic please have a look - at the <ulink - url="http://freedesktop.org/wiki/Software/systemd/Preset">Presets</ulink> - document.</para> - - <para>It is not recommended to ship preset files within the - respective software packages implementing the units, but rather - centralize them in a distribution or spin default policy, which - can be amended by administrator policy.</para> - - <para>If no preset files exist, <command>systemctl - preset</command> will enable all units that are installed by - default. If this is not desired and all units shall rather be - disabled, it is necessary to ship a preset file with a single, - catchall "<filename>disable *</filename>" line. (See example 1, - below.)</para> - </refsect1> - - <refsect1> - <title>Preset File Format</title> - - <para>The preset files contain a list of directives consisting of - either the word <literal>enable</literal> or - <literal>disable</literal> followed by a space and a unit name - (possibly with shell style wildcards), separated by newlines. - Empty lines and lines whose first non-whitespace character is # or - ; are ignored.</para> - - <para>Two different directives are understood: - <literal>enable</literal> may be used to enable units by default, - <literal>disable</literal> to disable units by default.</para> - - <para>If multiple lines apply to a unit name, the first matching - one takes precedence over all others.</para> - - <para>Each preset file shall be named in the style of - <filename><priority>-<policy-name>.preset</filename>. Files - in <filename>/etc/</filename> override files with the same name in - <filename>/usr/lib/</filename> and <filename>/run/</filename>. - Files in <filename>/run/</filename> override files with the same - name in <filename>/usr/lib/</filename>. Packages should install - their preset files in <filename>/usr/lib/</filename>. Files in - <filename>/etc/</filename> are reserved for the local - administrator, who may use this logic to override the preset files - installed by vendor packages. All preset files are sorted by their - filename in lexicographic order, regardless of which of the - directories they reside in. If multiple files specify the same - unit name, the entry in the file with the lexicographically - earliest name will be applied. It is recommended to prefix all - filenames with a two-digit number and a dash, to simplify the - ordering of the files.</para> - - <para>If the administrator wants to disable a preset file supplied - by the vendor, the recommended way is to place a symlink to - <filename>/dev/null</filename> in - <filename>/etc/systemd/system-preset/</filename> bearing the same - filename.</para> - </refsect1> - - <refsect1> - <title>Example</title> - - <example> - <title>Default off example <filename>/usr/lib/systemd/system-preset/99-default.preset</filename>:</title> - - <programlisting>disable *</programlisting> - </example> - - <para>This disables all units. Due to the filename prefix - <literal>99-</literal>, it will be read last and hence can easily - be overridden by spin or administrator preset policy or - suchlike.</para> - - <example> - <title>A GNOME spin example <filename>/usr/lib/systemd/system-preset/50-gnome.preset</filename>:</title> - - <programlisting>enable gdm.service -enable colord.service -enable accounts-daemon.service -enable avahi-daemon.*</programlisting> - - </example> - - <para>This enables the three mentioned units, plus all - <filename>avahi-daemon</filename> regardless of which unit type. A - file like this could be useful for inclusion in a GNOME spin of a - distribution. It will ensure that the units necessary for GNOME - are properly enabled as they are installed. It leaves all other - units untouched, and subject to other (later) preset files, for - example like the one from the first example above.</para> - - <example> - <title>Administrator policy <filename>/etc/systemd/system-preset/00-lennart.preset</filename>:</title> - - <programlisting>enable httpd.service -enable sshd.service -enable postfix.service -disable *</programlisting> - </example> - - <para>This enables three specific services and disables all - others. This is useful for administrators to specifically select - the units to enable, and disable all others. Due to the filename - prefix <literal>00-</literal> it will be read early and hence - overrides all other preset policy files.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-delta</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.resource-control.xml b/man/systemd.resource-control.xml deleted file mode 100644 index 066f2cc19b..0000000000 --- a/man/systemd.resource-control.xml +++ /dev/null @@ -1,628 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2013 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.resource-control"> - <refentryinfo> - <title>systemd.resource-control</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.resource-control</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.resource-control</refname> - <refpurpose>Resource control unit settings</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para> - <filename><replaceable>slice</replaceable>.slice</filename>, - <filename><replaceable>scope</replaceable>.scope</filename>, - <filename><replaceable>service</replaceable>.service</filename>, - <filename><replaceable>socket</replaceable>.socket</filename>, - <filename><replaceable>mount</replaceable>.mount</filename>, - <filename><replaceable>swap</replaceable>.swap</filename> - </para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>Unit configuration files for services, slices, scopes, - sockets, mount points, and swap devices share a subset of - configuration options for resource control of spawned - processes. Internally, this relies on the Control Groups - kernel concept for organizing processes in a hierarchical tree of - named groups for the purpose of resource management.</para> - - <para>This man page lists the configuration options shared by - those six unit types. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for the common options of all unit configuration files, and - <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - and - <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information on the specific unit configuration files. The - resource control configuration options are configured in the - [Slice], [Scope], [Service], [Socket], [Mount], or [Swap] - sections, depending on the unit type.</para> - - <para>See the <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/ControlGroupInterface/">New - Control Group Interfaces</ulink> for an introduction on how to make - use of resource control APIs from programs.</para> - </refsect1> - - <refsect1> - <title>Automatic Dependencies</title> - - <para>Units with the <varname>Slice=</varname> setting set get - automatic <varname>Requires=</varname> and - <varname>After=</varname> dependencies on the specified slice - unit.</para> - </refsect1> - - <refsect1> - <title>Unified and Legacy Control Group Hierarchies</title> - - <para>Unified control group hierarchy is the new version of kernel control group interface. Depending on the - resource type, there are differences in resource control capabilities. Also, because of interface changes, some - resource types have a separate set of options on the unified hierarchy.</para> - - <para> - <variablelist> - <varlistentry> - <term><option>IO</option></term> - <listitem> - <para><varname>IO</varname> prefixed settings are superset of and replace <varname>BlockIO</varname> - prefixed ones. On unified hierarchy, IO resource control also applies to buffered writes.</para> - </listitem> - </varlistentry> - </variablelist> - </para> - - <para>To ease the transition, there is best-effort translation between the two versions of settings. If all - settings of a unit for a given resource type are for the other hierarchy type, the settings are translated and - applied. If there are any valid settings for the hierarchy in use, all translations are disabled for the resource - type. Mixing the two types of settings on a unit can lead to confusing results.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>Units of the types listed above can have settings - for resource control configuration:</para> - - <variablelist class='unit-directives'> - - <varlistentry> - <term><varname>CPUAccounting=</varname></term> - - <listitem> - <para>Turn on CPU usage accounting for this unit. Takes a - boolean argument. Note that turning on CPU accounting for - one unit will also implicitly turn it on for all units - contained in the same slice and for all its parent slices - and the units contained therein. The system default for this - setting may be controlled with - <varname>DefaultCPUAccounting=</varname> in - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>CPUShares=<replaceable>weight</replaceable></varname></term> - <term><varname>StartupCPUShares=<replaceable>weight</replaceable></varname></term> - - <listitem> - <para>Assign the specified CPU time share weight to the - processes executed. These options take an integer value and - control the <literal>cpu.shares</literal> control group - attribute. The allowed range is 2 to 262144. Defaults to - 1024. For details about this control group attribute, see - <ulink - url="https://www.kernel.org/doc/Documentation/scheduler/sched-design-CFS.txt">sched-design-CFS.txt</ulink>. - The available CPU time is split up among all units within - one slice relative to their CPU time share weight.</para> - - <para>While <varname>StartupCPUShares=</varname> only - applies to the startup phase of the system, - <varname>CPUShares=</varname> applies to normal runtime of - the system, and if the former is not set also to the startup - phase. Using <varname>StartupCPUShares=</varname> allows - prioritizing specific services at boot-up differently than - during normal runtime.</para> - - <para>These options imply - <literal>CPUAccounting=true</literal>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>CPUQuota=</varname></term> - - <listitem> - <para>Assign the specified CPU time quota to the processes - executed. Takes a percentage value, suffixed with "%". The - percentage specifies how much CPU time the unit shall get at - maximum, relative to the total CPU time available on one - CPU. Use values > 100% for allotting CPU time on more than - one CPU. This controls the - <literal>cpu.cfs_quota_us</literal> control group - attribute. For details about this control group attribute, - see <ulink - url="https://www.kernel.org/doc/Documentation/scheduler/sched-design-CFS.txt">sched-design-CFS.txt</ulink>.</para> - - <para>Example: <varname>CPUQuota=20%</varname> ensures that - the executed processes will never get more than 20% CPU time - on one CPU.</para> - - <para>Implies <literal>CPUAccounting=true</literal>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>MemoryAccounting=</varname></term> - - <listitem> - <para>Turn on process and kernel memory accounting for this - unit. Takes a boolean argument. Note that turning on memory - accounting for one unit will also implicitly turn it on for - all units contained in the same slice and for all its parent - slices and the units contained therein. The system default - for this setting may be controlled with - <varname>DefaultMemoryAccounting=</varname> in - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>MemoryLimit=<replaceable>bytes</replaceable></varname></term> - - <listitem> - <para>Specify the limit on maximum memory usage of the - executed processes. The limit specifies how much process and - kernel memory can be used by tasks in this unit. Takes a - memory size in bytes. If the value is suffixed with K, M, G - or T, the specified memory size is parsed as Kilobytes, - Megabytes, Gigabytes, or Terabytes (with the base 1024), - respectively. If assigned the special value - <literal>infinity</literal>, no memory limit is applied. This - controls the <literal>memory.limit_in_bytes</literal> - control group attribute. For details about this control - group attribute, see <ulink - url="https://www.kernel.org/doc/Documentation/cgroup-v1/memory.txt">memory.txt</ulink>.</para> - - <para>Implies <literal>MemoryAccounting=true</literal>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>TasksAccounting=</varname></term> - - <listitem> - <para>Turn on task accounting for this unit. Takes a - boolean argument. If enabled, the system manager will keep - track of the number of tasks in the unit. The number of - tasks accounted this way includes both kernel threads and - userspace processes, with each thread counting - individually. Note that turning on tasks accounting for one - unit will also implicitly turn it on for all units contained - in the same slice and for all its parent slices and the - units contained therein. The system default for this setting - may be controlled with - <varname>DefaultTasksAccounting=</varname> in - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>TasksMax=<replaceable>N</replaceable></varname></term> - - <listitem> - <para>Specify the maximum number of tasks that may be - created in the unit. This ensures that the number of tasks - accounted for the unit (see above) stays below a specific - limit. If assigned the special value - <literal>infinity</literal>, no tasks limit is applied. This - controls the <literal>pids.max</literal> control group - attribute. For details about this control group attribute, - see <ulink - url="https://www.kernel.org/doc/Documentation/cgroup-v1/pids.txt">pids.txt</ulink>.</para> - - <para>Implies <literal>TasksAccounting=true</literal>. The - system default for this setting may be controlled with - <varname>DefaultTasksMax=</varname> in - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>IOAccounting=</varname></term> - - <listitem> - <para>Turn on Block I/O accounting for this unit, if the unified control group hierarchy is used on the - system. Takes a boolean argument. Note that turning on block I/O accounting for one unit will also implicitly - turn it on for all units contained in the same slice and all for its parent slices and the units contained - therein. The system default for this setting may be controlled with <varname>DefaultIOAccounting=</varname> - in - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - - <para>This setting is supported only if the unified control group hierarchy is used. Use - <varname>BlockIOAccounting=</varname> on systems using the legacy control group hierarchy.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>IOWeight=<replaceable>weight</replaceable></varname></term> - <term><varname>StartupIOWeight=<replaceable>weight</replaceable></varname></term> - - <listitem> - <para>Set the default overall block I/O weight for the executed processes, if the unified control group - hierarchy is used on the system. Takes a single weight value (between 1 and 10000) to set the default block - I/O weight. This controls the <literal>io.weight</literal> control group attribute, which defaults to - 100. For details about this control group attribute, see <ulink - url="https://www.kernel.org/doc/Documentation/cgroup-v2.txt">cgroup-v2.txt</ulink>. The available I/O - bandwidth is split up among all units within one slice relative to their block I/O weight.</para> - - <para>While <varname>StartupIOWeight=</varname> only applies - to the startup phase of the system, - <varname>IOWeight=</varname> applies to the later runtime of - the system, and if the former is not set also to the startup - phase. This allows prioritizing specific services at boot-up - differently than during runtime.</para> - - <para>Implies <literal>IOAccounting=true</literal>.</para> - - <para>This setting is supported only if the unified control group hierarchy is used. Use - <varname>BlockIOWeight=</varname> and <varname>StartupBlockIOWeight=</varname> on systems using the legacy - control group hierarchy.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>IODeviceWeight=<replaceable>device</replaceable> <replaceable>weight</replaceable></varname></term> - - <listitem> - <para>Set the per-device overall block I/O weight for the executed processes, if the unified control group - hierarchy is used on the system. Takes a space-separated pair of a file path and a weight value to specify - the device specific weight value, between 1 and 10000. (Example: "/dev/sda 1000"). The file path may be - specified as path to a block device node or as any other file, in which case the backing block device of the - file system of the file is determined. This controls the <literal>io.weight</literal> control group - attribute, which defaults to 100. Use this option multiple times to set weights for multiple devices. For - details about this control group attribute, see <ulink - url="https://www.kernel.org/doc/Documentation/cgroup-v2.txt">cgroup-v2.txt</ulink>.</para> - - <para>Implies <literal>IOAccounting=true</literal>.</para> - - <para>This setting is supported only if the unified control group hierarchy is used. Use - <varname>BlockIODeviceWeight=</varname> on systems using the legacy control group hierarchy.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>IOReadBandwidthMax=<replaceable>device</replaceable> <replaceable>bytes</replaceable></varname></term> - <term><varname>IOWriteBandwidthMax=<replaceable>device</replaceable> <replaceable>bytes</replaceable></varname></term> - - <listitem> - <para>Set the per-device overall block I/O bandwidth maximum limit for the executed processes, if the unified - control group hierarchy is used on the system. This limit is not work-conserving and the executed processes - are not allowed to use more even if the device has idle capacity. Takes a space-separated pair of a file - path and a bandwidth value (in bytes per second) to specify the device specific bandwidth. The file path may - be a path to a block device node, or as any other file in which case the backing block device of the file - system of the file is used. If the bandwidth is suffixed with K, M, G, or T, the specified bandwidth is - parsed as Kilobytes, Megabytes, Gigabytes, or Terabytes, respectively, to the base of 1000. (Example: - "/dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0 5M"). This controls the <literal>io.max</literal> control - group attributes. Use this option multiple times to set bandwidth limits for multiple devices. For details - about this control group attribute, see <ulink - url="https://www.kernel.org/doc/Documentation/cgroup-v2.txt">cgroup-v2.txt</ulink>. - </para> - - <para>Implies <literal>IOAccounting=true</literal>.</para> - - <para>This setting is supported only if the unified control group hierarchy is used. Use - <varname>BlockIOAccounting=</varname> on systems using the legacy control group hierarchy.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>IOReadIOPSMax=<replaceable>device</replaceable> <replaceable>IOPS</replaceable></varname></term> - <term><varname>IOWriteIOPSMax=<replaceable>device</replaceable> <replaceable>IOPS</replaceable></varname></term> - - <listitem> - <para>Set the per-device overall block I/O IOs-Per-Second maximum limit for the executed processes, if the - unified control group hierarchy is used on the system. This limit is not work-conserving and the executed - processes are not allowed to use more even if the device has idle capacity. Takes a space-separated pair of - a file path and an IOPS value to specify the device specific IOPS. The file path may be a path to a block - device node, or as any other file in which case the backing block device of the file system of the file is - used. If the IOPS is suffixed with K, M, G, or T, the specified IOPS is parsed as KiloIOPS, MegaIOPS, - GigaIOPS, or TeraIOPS, respectively, to the base of 1000. (Example: - "/dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0 1K"). This controls the <literal>io.max</literal> control - group attributes. Use this option multiple times to set IOPS limits for multiple devices. For details about - this control group attribute, see <ulink - url="https://www.kernel.org/doc/Documentation/cgroup-v2.txt">cgroup-v2.txt</ulink>. - </para> - - <para>Implies <literal>IOAccounting=true</literal>.</para> - - <para>This setting is supported only if the unified control group hierarchy is used.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>BlockIOAccounting=</varname></term> - - <listitem> - <para>Turn on Block I/O accounting for this unit, if the legacy control group hierarchy is used on the - system. Takes a boolean argument. Note that turning on block I/O accounting for one unit will also implicitly - turn it on for all units contained in the same slice and all for its parent slices and the units contained - therein. The system default for this setting may be controlled with - <varname>DefaultBlockIOAccounting=</varname> in - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - - <para>This setting is supported only if the legacy control group hierarchy is used. Use - <varname>IOAccounting=</varname> on systems using the unified control group hierarchy.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>BlockIOWeight=<replaceable>weight</replaceable></varname></term> - <term><varname>StartupBlockIOWeight=<replaceable>weight</replaceable></varname></term> - - <listitem><para>Set the default overall block I/O weight for the executed processes, if the legacy control - group hierarchy is used on the system. Takes a single weight value (between 10 and 1000) to set the default - block I/O weight. This controls the <literal>blkio.weight</literal> control group attribute, which defaults to - 500. For details about this control group attribute, see <ulink - url="https://www.kernel.org/doc/Documentation/cgroup-v1/blkio-controller.txt">blkio-controller.txt</ulink>. - The available I/O bandwidth is split up among all units within one slice relative to their block I/O - weight.</para> - - <para>While <varname>StartupBlockIOWeight=</varname> only - applies to the startup phase of the system, - <varname>BlockIOWeight=</varname> applies to the later runtime - of the system, and if the former is not set also to the - startup phase. This allows prioritizing specific services at - boot-up differently than during runtime.</para> - - <para>Implies - <literal>BlockIOAccounting=true</literal>.</para> - - <para>This setting is supported only if the legacy control group hierarchy is used. Use - <varname>IOWeight=</varname> and <varname>StartupIOWeight=</varname> on systems using the unified control group - hierarchy.</para> - - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>BlockIODeviceWeight=<replaceable>device</replaceable> <replaceable>weight</replaceable></varname></term> - - <listitem> - <para>Set the per-device overall block I/O weight for the executed processes, if the legacy control group - hierarchy is used on the system. Takes a space-separated pair of a file path and a weight value to specify - the device specific weight value, between 10 and 1000. (Example: "/dev/sda 500"). The file path may be - specified as path to a block device node or as any other file, in which case the backing block device of the - file system of the file is determined. This controls the <literal>blkio.weight_device</literal> control group - attribute, which defaults to 1000. Use this option multiple times to set weights for multiple devices. For - details about this control group attribute, see <ulink - url="https://www.kernel.org/doc/Documentation/cgroup-v1/blkio-controller.txt">blkio-controller.txt</ulink>.</para> - - <para>Implies - <literal>BlockIOAccounting=true</literal>.</para> - - <para>This setting is supported only if the legacy control group hierarchy is used. Use - <varname>IODeviceWeight=</varname> on systems using the unified control group hierarchy.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>BlockIOReadBandwidth=<replaceable>device</replaceable> <replaceable>bytes</replaceable></varname></term> - <term><varname>BlockIOWriteBandwidth=<replaceable>device</replaceable> <replaceable>bytes</replaceable></varname></term> - - <listitem> - <para>Set the per-device overall block I/O bandwidth limit for the executed processes, if the legacy control - group hierarchy is used on the system. Takes a space-separated pair of a file path and a bandwidth value (in - bytes per second) to specify the device specific bandwidth. The file path may be a path to a block device - node, or as any other file in which case the backing block device of the file system of the file is used. If - the bandwidth is suffixed with K, M, G, or T, the specified bandwidth is parsed as Kilobytes, Megabytes, - Gigabytes, or Terabytes, respectively, to the base of 1000. (Example: - "/dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0 5M"). This controls the - <literal>blkio.throttle.read_bps_device</literal> and <literal>blkio.throttle.write_bps_device</literal> - control group attributes. Use this option multiple times to set bandwidth limits for multiple devices. For - details about these control group attributes, see <ulink - url="https://www.kernel.org/doc/Documentation/cgroup-v1/blkio-controller.txt">blkio-controller.txt</ulink>. - </para> - - <para>Implies - <literal>BlockIOAccounting=true</literal>.</para> - - <para>This setting is supported only if the legacy control group hierarchy is used. Use - <varname>IOReadBandwidthMax=</varname> and <varname>IOWriteBandwidthMax=</varname> on systems using the - unified control group hierarchy.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>DeviceAllow=</varname></term> - - <listitem> - <para>Control access to specific device nodes by the - executed processes. Takes two space-separated strings: a - device node specifier followed by a combination of - <constant>r</constant>, <constant>w</constant>, - <constant>m</constant> to control - <emphasis>r</emphasis>eading, <emphasis>w</emphasis>riting, - or creation of the specific device node(s) by the unit - (<emphasis>m</emphasis>knod), respectively. This controls - the <literal>devices.allow</literal> and - <literal>devices.deny</literal> control group - attributes. For details about these control group - attributes, see <ulink - url="https://www.kernel.org/doc/Documentation/cgroup-v1/devices.txt">devices.txt</ulink>.</para> - - <para>The device node specifier is either a path to a device - node in the file system, starting with - <filename>/dev/</filename>, or a string starting with either - <literal>char-</literal> or <literal>block-</literal> - followed by a device group name, as listed in - <filename>/proc/devices</filename>. The latter is useful to - whitelist all current and future devices belonging to a - specific device group at once. The device group is matched - according to file name globbing rules, you may hence use the - <literal>*</literal> and <literal>?</literal> - wildcards. Examples: <filename>/dev/sda5</filename> is a - path to a device node, referring to an ATA or SCSI block - device. <literal>char-pts</literal> and - <literal>char-alsa</literal> are specifiers for all pseudo - TTYs and all ALSA sound devices, - respectively. <literal>char-cpu/*</literal> is a specifier - matching all CPU related device groups.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>DevicePolicy=auto|closed|strict</varname></term> - - <listitem> - <para> - Control the policy for allowing device access: - </para> - <variablelist> - <varlistentry> - <term><option>strict</option></term> - <listitem> - <para>means to only allow types of access that are - explicitly specified.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>closed</option></term> - <listitem> - <para>in addition, allows access to standard pseudo - devices including - <filename>/dev/null</filename>, - <filename>/dev/zero</filename>, - <filename>/dev/full</filename>, - <filename>/dev/random</filename>, and - <filename>/dev/urandom</filename>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>auto</option></term> - <listitem> - <para> - in addition, allows access to all devices if no - explicit <varname>DeviceAllow=</varname> is present. - This is the default. - </para> - </listitem> - </varlistentry> - </variablelist> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>Slice=</varname></term> - - <listitem> - <para>The name of the slice unit to place the unit - in. Defaults to <filename>system.slice</filename> for all - non-instantiated units of all unit types (except for slice - units themselves see below). Instance units are by default - placed in a subslice of <filename>system.slice</filename> - that is named after the template name.</para> - - <para>This option may be used to arrange systemd units in a - hierarchy of slices each of which might have resource - settings applied.</para> - - <para>For units of type slice, the only accepted value for - this setting is the parent slice. Since the name of a slice - unit implies the parent slice, it is hence redundant to ever - set this parameter directly for slice units.</para> - - <para>Special care should be taken when relying on the default slice assignment in templated service units - that have <varname>DefaultDependencies=no</varname> set, see - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, section - "Automatic Dependencies" for details.</para> - - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>Delegate=</varname></term> - - <listitem> - <para>Turns on delegation of further resource control - partitioning to processes of the unit. For unprivileged - services (i.e. those using the <varname>User=</varname> - setting), this allows processes to create a subhierarchy - beneath its control group path. For privileged services and - scopes, this ensures the processes will have all control - group controllers enabled.</para> - </listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - The documentation for control groups and specific controllers in the Linux kernel: - <ulink url="https://www.kernel.org/doc/Documentation/cgroup-v1/cgroups.txt">cgroups.txt</ulink>, - <ulink url="https://www.kernel.org/doc/Documentation/cgroup-v1/cpuacct.txt">cpuacct.txt</ulink>, - <ulink url="https://www.kernel.org/doc/Documentation/cgroup-v1/memory.txt">memory.txt</ulink>, - <ulink url="https://www.kernel.org/doc/Documentation/cgroup-v1/blkio-controller.txt">blkio-controller.txt</ulink>. - </para> - </refsect1> -</refentry> diff --git a/man/systemd.scope.xml b/man/systemd.scope.xml deleted file mode 100644 index f69b2ef635..0000000000 --- a/man/systemd.scope.xml +++ /dev/null @@ -1,108 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2013 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.scope"> - <refentryinfo> - <title>systemd.scope</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.scope</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.scope</refname> - <refpurpose>Scope unit configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>scope</replaceable>.scope</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>Scope units are not configured via unit configuration files, - but are only created programmatically using the bus interfaces of - systemd. They are named similar to filenames. A unit whose name - ends in <literal>.scope</literal> refers to a scope unit. Scopes - units manage a set of system processes. Unlike service units, scope - units manage externally created processes, and do not fork off - processes on its own.</para> - - <para>The main purpose of scope units is grouping worker processes - of a system service for organization and for managing resources.</para> - - <para><command>systemd-run <option>--scope</option></command> may - be used to easily launch a command in a new scope unit from the - command line.</para> - - <para>See the <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/ControlGroupInterface/">New - Control Group Interfaces</ulink> for an introduction on how to make - use of scope units from programs.</para> - </refsect1> - - <refsect1> - <title>Automatic Dependencies</title> - - <para>Unless <varname>DefaultDependencies=false</varname> - is used, scope units will implicitly have dependencies of - type <varname>Conflicts=</varname> and - <varname>Before=</varname> on - <filename>shutdown.target</filename>. These ensure - that scope units are removed prior to system - shutdown. Only scope units involved with early boot or - late system shutdown should disable this option. - </para> - - <para>Additional implicit dependencies may be added as result of - resource control parameters as documented in - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-run</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>. - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.service.xml b/man/systemd.service.xml deleted file mode 100644 index 6641dfed4f..0000000000 --- a/man/systemd.service.xml +++ /dev/null @@ -1,1352 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.service"> - <refentryinfo> - <title>systemd.service</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.service</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.service</refname> - <refpurpose>Service unit configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>service</replaceable>.service</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>A unit configuration file whose name ends in - <filename>.service</filename> encodes information about a process - controlled and supervised by systemd.</para> - - <para>This man page lists the configuration options specific to - this unit type. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for the common options of all unit configuration files. The common - configuration items are configured in the generic - <literal>[Unit]</literal> and <literal>[Install]</literal> - sections. The service specific configuration options are - configured in the <literal>[Service]</literal> section.</para> - - <para>Additional options are listed in - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - which define the execution environment the commands are executed - in, and in - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - which define the way the processes of the service are terminated, - and in - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - which configure resource control settings for the processes of the - service.</para> - - <para>If a service is requested under a certain name but no unit - configuration file is found, systemd looks for a SysV init script - by the same name (with the <filename>.service</filename> suffix - removed) and dynamically creates a service unit from that script. - This is useful for compatibility with SysV. Note that this - compatibility is quite comprehensive but not 100%. For details - about the incompatibilities, see the <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/Incompatibilities">Incompatibilities - with SysV</ulink> document.</para> - </refsect1> - - <refsect1> - <title>Automatic Dependencies</title> - - <para>Services with <varname>Type=dbus</varname> set automatically - acquire dependencies of type <varname>Requires=</varname> and - <varname>After=</varname> on - <filename>dbus.socket</filename>.</para> - - <para>Socket activated service are automatically ordered after - their activated <filename>.socket</filename> units via an - automatic <varname>After=</varname> dependency.</para> - - <para>Unless <varname>DefaultDependencies=</varname> in the <literal>[Unit]</literal> is set to - <option>false</option>, service units will implicitly have dependencies of type <varname>Requires=</varname> and - <varname>After=</varname> on <filename>sysinit.target</filename>, a dependency of type <varname>After=</varname> on - <filename>basic.target</filename> as well as dependencies of type <varname>Conflicts=</varname> and - <varname>Before=</varname> on <filename>shutdown.target</filename>. These ensure that normal service units pull in - basic system initialization, and are terminated cleanly prior to system shutdown. Only services involved with early - boot or late system shutdown should disable this option.</para> - - <para>Instanced service units (i.e. service units with an <literal>@</literal> in their name) are assigned by - default a per-template slice unit (see - <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>), named after the - template unit, containing all instances of the specific template. This slice is normally stopped at shutdown, - together with all template instances. If that is not desired, set <varname>DefaultDependencies=no</varname> in the - template unit, and either define your own per-template slice unit file that also sets - <varname>DefaultDependencies=no</varname>, or set <varname>Slice=system.slice</varname> (or another suitable slice) - in the template unit. Also see - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - - <para>Additional implicit dependencies may be added as result of - execution and resource control parameters as documented in - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>Service files must include a <literal>[Service]</literal> - section, which carries information about the service and the - process it supervises. A number of options that may be used in - this section are shared with other unit types. These options are - documented in - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - The options specific to the <literal>[Service]</literal> section - of service units are the following:</para> - - <variablelist class='unit-directives'> - <varlistentry> - <term><varname>Type=</varname></term> - - <listitem><para>Configures the process start-up type for this - service unit. One of - <option>simple</option>, - <option>forking</option>, - <option>oneshot</option>, - <option>dbus</option>, - <option>notify</option> or - <option>idle</option>.</para> - - <para>If set to <option>simple</option> (the default if - neither <varname>Type=</varname> nor - <varname>BusName=</varname>, but <varname>ExecStart=</varname> - are specified), it is expected that the process configured - with <varname>ExecStart=</varname> is the main process of the - service. In this mode, if the process offers functionality to - other processes on the system, its communication channels - should be installed before the daemon is started up (e.g. - sockets set up by systemd, via socket activation), as systemd - will immediately proceed starting follow-up units.</para> - - <para>If set to <option>forking</option>, it is expected that - the process configured with <varname>ExecStart=</varname> will - call <function>fork()</function> as part of its start-up. The - parent process is expected to exit when start-up is complete - and all communication channels are set up. The child continues - to run as the main daemon process. This is the behavior of - traditional UNIX daemons. If this setting is used, it is - recommended to also use the <varname>PIDFile=</varname> - option, so that systemd can identify the main process of the - daemon. systemd will proceed with starting follow-up units as - soon as the parent process exits.</para> - - <para>Behavior of <option>oneshot</option> is similar to - <option>simple</option>; however, it is expected that the - process has to exit before systemd starts follow-up units. - <varname>RemainAfterExit=</varname> is particularly useful for - this type of service. This is the implied default if neither - <varname>Type=</varname> or <varname>ExecStart=</varname> are - specified.</para> - - <para>Behavior of <option>dbus</option> is similar to - <option>simple</option>; however, it is expected that the - daemon acquires a name on the D-Bus bus, as configured by - <varname>BusName=</varname>. systemd will proceed with - starting follow-up units after the D-Bus bus name has been - acquired. Service units with this option configured implicitly - gain dependencies on the <filename>dbus.socket</filename> - unit. This type is the default if <varname>BusName=</varname> - is specified.</para> - - <para>Behavior of <option>notify</option> is similar to - <option>simple</option>; however, it is expected that the - daemon sends a notification message via - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry> - or an equivalent call when it has finished starting up. - systemd will proceed with starting follow-up units after this - notification message has been sent. If this option is used, - <varname>NotifyAccess=</varname> (see below) should be set to - open access to the notification socket provided by systemd. If - <varname>NotifyAccess=</varname> is not set, it will be - implicitly set to <option>main</option>. Note that currently - <varname>Type=</varname><option>notify</option> will not work - if used in combination with - <varname>PrivateNetwork=</varname><option>yes</option>.</para> - - <para>Behavior of <option>idle</option> is very similar to - <option>simple</option>; however, actual execution of the - service binary is delayed until all jobs are dispatched. This - may be used to avoid interleaving of output of shell services - with the status output on the console.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>RemainAfterExit=</varname></term> - - <listitem><para>Takes a boolean value that specifies whether - the service shall be considered active even when all its - processes exited. Defaults to <option>no</option>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>GuessMainPID=</varname></term> - - <listitem><para>Takes a boolean value that specifies whether - systemd should try to guess the main PID of a service if it - cannot be determined reliably. This option is ignored unless - <option>Type=forking</option> is set and - <option>PIDFile=</option> is unset because for the other types - or with an explicitly configured PID file, the main PID is - always known. The guessing algorithm might come to incorrect - conclusions if a daemon consists of more than one process. If - the main PID cannot be determined, failure detection and - automatic restarting of a service will not work reliably. - Defaults to <option>yes</option>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>PIDFile=</varname></term> - - <listitem><para>Takes an absolute file name pointing to the - PID file of this daemon. Use of this option is recommended for - services where <varname>Type=</varname> is set to - <option>forking</option>. systemd will read the PID of the - main process of the daemon after start-up of the service. - systemd will not write to the file configured here, although - it will remove the file after the service has shut down if it - still exists. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>BusName=</varname></term> - - <listitem><para>Takes a D-Bus bus name that this service is - reachable as. This option is mandatory for services where - <varname>Type=</varname> is set to - <option>dbus</option>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>ExecStart=</varname></term> - <listitem><para>Commands with their arguments that are - executed when this service is started. The value is split into - zero or more command lines according to the rules described - below (see section "Command Lines" below). - </para> - - <para>When <varname>Type=</varname> is not - <option>oneshot</option>, only one command may and must be - given. When <varname>Type=oneshot</varname> is used, zero or - more commands may be specified. This can be specified by - providing multiple command lines in the same directive, or - alternatively, this directive may be specified more than once - with the same effect. If the empty string is assigned to this - option, the list of commands to start is reset, prior - assignments of this option will have no effect. If no - <varname>ExecStart=</varname> is specified, then the service - must have <varname>RemainAfterExit=yes</varname> set.</para> - - <para>For each of the specified commands, the first argument - must be an absolute path to an executable. Optionally, if this - file name is prefixed with <literal>@</literal>, the second - token will be passed as <literal>argv[0]</literal> to the - executed process, followed by the further arguments specified. - If the absolute filename is prefixed with - <literal>-</literal>, an exit code of the command normally - considered a failure (i.e. non-zero exit status or abnormal - exit due to signal) is ignored and considered success. If both - <literal>-</literal> and <literal>@</literal> are used, they - can appear in either order.</para> - - <para>If more than one command is specified, the commands are - invoked sequentially in the order they appear in the unit - file. If one of the commands fails (and is not prefixed with - <literal>-</literal>), other lines are not executed, and the - unit is considered failed.</para> - - <para>Unless <varname>Type=forking</varname> is set, the - process started via this command line will be considered the - main process of the daemon.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>ExecStartPre=</varname></term> - <term><varname>ExecStartPost=</varname></term> - <listitem><para>Additional commands that are executed before - or after the command in <varname>ExecStart=</varname>, - respectively. Syntax is the same as for - <varname>ExecStart=</varname>, except that multiple command - lines are allowed and the commands are executed one after the - other, serially.</para> - - <para>If any of those commands (not prefixed with - <literal>-</literal>) fail, the rest are not executed and the - unit is considered failed.</para> - - <para><varname>ExecStart=</varname> commands are only run after - all <varname>ExecStartPre=</varname> commands that were not prefixed - with a <literal>-</literal> exit successfully.</para> - - <para><varname>ExecStartPost=</varname> commands are only run after - the service has started successfully, as determined by <varname>Type=</varname> - (i.e. the process has been started for <varname>Type=simple</varname> - or <varname>Type=idle</varname>, the process exits successfully for - <varname>Type=oneshot</varname>, the initial process exits successfully - for <varname>Type=forking</varname>, <literal>READY=1</literal> is sent - for <varname>Type=notify</varname>, or the <varname>BusName=</varname> - has been taken for <varname>Type=dbus</varname>).</para> - - <para>Note that <varname>ExecStartPre=</varname> may not be - used to start long-running processes. All processes forked - off by processes invoked via <varname>ExecStartPre=</varname> will - be killed before the next service process is run.</para> - - <para>Note that if any of the commands specified in <varname>ExecStartPre=</varname>, - <varname>ExecStart=</varname>, or <varname>ExecStartPost=</varname> fail (and are not prefixed with - <literal>-</literal>, see above) or time out before the service is fully up, execution continues with commands - specified in <varname>ExecStopPost=</varname>, the commands in <varname>ExecStop=</varname> are skipped.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>ExecReload=</varname></term> - <listitem><para>Commands to execute to trigger a configuration - reload in the service. This argument takes multiple command - lines, following the same scheme as described for - <varname>ExecStart=</varname> above. Use of this setting is - optional. Specifier and environment variable substitution is - supported here following the same scheme as for - <varname>ExecStart=</varname>.</para> - - <para>One additional, special environment variable is set: if - known, <varname>$MAINPID</varname> is set to the main process - of the daemon, and may be used for command lines like the - following:</para> - - <programlisting>/bin/kill -HUP $MAINPID</programlisting> - - <para>Note however that reloading a daemon by sending a signal - (as with the example line above) is usually not a good choice, - because this is an asynchronous operation and hence not - suitable to order reloads of multiple services against each - other. It is strongly recommended to set - <varname>ExecReload=</varname> to a command that not only - triggers a configuration reload of the daemon, but also - synchronously waits for it to complete.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>ExecStop=</varname></term> - <listitem><para>Commands to execute to stop the service - started via <varname>ExecStart=</varname>. This argument takes - multiple command lines, following the same scheme as described - for <varname>ExecStart=</varname> above. Use of this setting - is optional. After the commands configured in this option are - run, all processes remaining for a service are terminated - according to the <varname>KillMode=</varname> setting (see - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>). - If this option is not specified, the process is terminated by - sending the signal specified in <varname>KillSignal=</varname> - when service stop is requested. Specifier and environment - variable substitution is supported (including - <varname>$MAINPID</varname>, see above).</para> - - <para>Note that it is usually not sufficient to specify a - command for this setting that only asks the service to - terminate (for example, by queuing some form of termination - signal for it), but does not wait for it to do so. Since the - remaining processes of the services are killed using - <constant>SIGKILL</constant> immediately after the command - exited, this would not result in a clean stop. The specified - command should hence be a synchronous operation, not an - asynchronous one.</para> - - <para>Note that the commands specified in <varname>ExecStop=</varname> are only executed when the service - started successfully first. They are not invoked if the service was never started at all, or in case its - start-up failed, for example because any of the commands specified in <varname>ExecStart=</varname>, - <varname>ExecStartPre=</varname> or <varname>ExecStartPost=</varname> failed (and weren't prefixed with - <literal>-</literal>, see above) or timed out. Use <varname>ExecStopPost=</varname> to invoke commands when a - service failed to start up correctly and is shut down again.</para> - - <para>It is recommended to use this setting for commands that communicate with the service requesting clean - termination. When the commands specified with this option are executed it should be assumed that the service is - still fully up and is able to react correctly to all commands. For post-mortem clean-up steps use - <varname>ExecStopPost=</varname> instead.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ExecStopPost=</varname></term> - <listitem><para>Additional commands that are executed after the service is stopped. This includes cases where - the commands configured in <varname>ExecStop=</varname> were used, where the service does not have any - <varname>ExecStop=</varname> defined, or where the service exited unexpectedly. This argument takes multiple - command lines, following the same scheme as described for <varname>ExecStart=</varname>. Use of these settings - is optional. Specifier and environment variable substitution is supported. Note that – unlike - <varname>ExecStop=</varname> – commands specified with this setting are invoked when a service failed to start - up correctly and is shut down again.</para> - - <para>It is recommended to use this setting for clean-up operations that shall be executed even when the - service failed to start up correctly. Commands configured with this setting need to be able to operate even if - the service failed starting up half-way and left incompletely initialized data around. As the service's - processes have been terminated already when the commands specified with this setting are executed they should - not attempt to communicate with them.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RestartSec=</varname></term> - <listitem><para>Configures the time to sleep before restarting - a service (as configured with <varname>Restart=</varname>). - Takes a unit-less value in seconds, or a time span value such - as "5min 20s". Defaults to 100ms.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>TimeoutStartSec=</varname></term> - <listitem><para>Configures the time to wait for start-up. If a - daemon service does not signal start-up completion within the - configured time, the service will be considered failed and - will be shut down again. Takes a unit-less value in seconds, - or a time span value such as "5min 20s". Pass - <literal>infinity</literal> to disable the timeout logic. Defaults to - <varname>DefaultTimeoutStartSec=</varname> from the manager - configuration file, except when - <varname>Type=oneshot</varname> is used, in which case the - timeout is disabled by default (see - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>). - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>TimeoutStopSec=</varname></term> - <listitem><para>Configures the time to wait for stop. If a - service is asked to stop, but does not terminate in the - specified time, it will be terminated forcibly via - <constant>SIGTERM</constant>, and after another timeout of - equal duration with <constant>SIGKILL</constant> (see - <varname>KillMode=</varname> in - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>). - Takes a unit-less value in seconds, or a time span value such - as "5min 20s". Pass <literal>infinity</literal> to disable the - timeout logic. Defaults to - <varname>DefaultTimeoutStopSec=</varname> from the manager - configuration file (see - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>). - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>TimeoutSec=</varname></term> - <listitem><para>A shorthand for configuring both - <varname>TimeoutStartSec=</varname> and - <varname>TimeoutStopSec=</varname> to the specified value. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RuntimeMaxSec=</varname></term> - - <listitem><para>Configures a maximum time for the service to run. If this is used and the service has been - active for longer than the specified time it is terminated and put into a failure state. Note that this setting - does not have any effect on <varname>Type=oneshot</varname> services, as they terminate immediately after - activation completed. Pass <literal>infinity</literal> (the default) to configure no runtime - limit.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>WatchdogSec=</varname></term> - <listitem><para>Configures the watchdog timeout for a service. - The watchdog is activated when the start-up is completed. The - service must call - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry> - regularly with <literal>WATCHDOG=1</literal> (i.e. the - "keep-alive ping"). If the time between two such calls is - larger than the configured time, then the service is placed in - a failed state and it will be terminated with - <constant>SIGABRT</constant>. By setting - <varname>Restart=</varname> to <option>on-failure</option>, - <option>on-watchdog</option>, <option>on-abnormal</option> or - <option>always</option>, the service will be automatically - restarted. The time configured here will be passed to the - executed service process in the - <varname>WATCHDOG_USEC=</varname> environment variable. This - allows daemons to automatically enable the keep-alive pinging - logic if watchdog support is enabled for the service. If this - option is used, <varname>NotifyAccess=</varname> (see below) - should be set to open access to the notification socket - provided by systemd. If <varname>NotifyAccess=</varname> is - not set, it will be implicitly set to <option>main</option>. - Defaults to 0, which disables this feature. The service can - check whether the service manager expects watchdog keep-alive - notifications. See - <citerefentry><refentrytitle>sd_watchdog_enabled</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for details. - <citerefentry><refentrytitle>sd_event_set_watchdog</refentrytitle><manvolnum>3</manvolnum></citerefentry> - may be used to enable automatic watchdog notification support. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Restart=</varname></term> - <listitem><para>Configures whether the service shall be - restarted when the service process exits, is killed, or a - timeout is reached. The service process may be the main - service process, but it may also be one of the processes - specified with <varname>ExecStartPre=</varname>, - <varname>ExecStartPost=</varname>, - <varname>ExecStop=</varname>, - <varname>ExecStopPost=</varname>, or - <varname>ExecReload=</varname>. When the death of the process - is a result of systemd operation (e.g. service stop or - restart), the service will not be restarted. Timeouts include - missing the watchdog "keep-alive ping" deadline and a service - start, reload, and stop operation timeouts.</para> - - <para>Takes one of - <option>no</option>, - <option>on-success</option>, - <option>on-failure</option>, - <option>on-abnormal</option>, - <option>on-watchdog</option>, - <option>on-abort</option>, or - <option>always</option>. - If set to <option>no</option> (the default), the service will - not be restarted. If set to <option>on-success</option>, it - will be restarted only when the service process exits cleanly. - In this context, a clean exit means an exit code of 0, or one - of the signals - <constant>SIGHUP</constant>, - <constant>SIGINT</constant>, - <constant>SIGTERM</constant> or - <constant>SIGPIPE</constant>, and - additionally, exit statuses and signals specified in - <varname>SuccessExitStatus=</varname>. If set to - <option>on-failure</option>, the service will be restarted - when the process exits with a non-zero exit code, is - terminated by a signal (including on core dump, but excluding - the aforementioned four signals), when an operation (such as - service reload) times out, and when the configured watchdog - timeout is triggered. If set to <option>on-abnormal</option>, - the service will be restarted when the process is terminated - by a signal (including on core dump, excluding the - aforementioned four signals), when an operation times out, or - when the watchdog timeout is triggered. If set to - <option>on-abort</option>, the service will be restarted only - if the service process exits due to an uncaught signal not - specified as a clean exit status. If set to - <option>on-watchdog</option>, the service will be restarted - only if the watchdog timeout for the service expires. If set - to <option>always</option>, the service will be restarted - regardless of whether it exited cleanly or not, got terminated - abnormally by a signal, or hit a timeout.</para> - - <table> - <title>Exit causes and the effect of the <varname>Restart=</varname> settings on them</title> - - <tgroup cols='2'> - <colspec colname='path' /> - <colspec colname='expl' /> - <thead> - <row> - <entry>Restart settings/Exit causes</entry> - <entry><option>no</option></entry> - <entry><option>always</option></entry> - <entry><option>on-success</option></entry> - <entry><option>on-failure</option></entry> - <entry><option>on-abnormal</option></entry> - <entry><option>on-abort</option></entry> - <entry><option>on-watchdog</option></entry> - </row> - </thead> - <tbody> - <row> - <entry>Clean exit code or signal</entry> - <entry/> - <entry>X</entry> - <entry>X</entry> - <entry/> - <entry/> - <entry/> - <entry/> - </row> - <row> - <entry>Unclean exit code</entry> - <entry/> - <entry>X</entry> - <entry/> - <entry>X</entry> - <entry/> - <entry/> - <entry/> - </row> - <row> - <entry>Unclean signal</entry> - <entry/> - <entry>X</entry> - <entry/> - <entry>X</entry> - <entry>X</entry> - <entry>X</entry> - <entry/> - </row> - <row> - <entry>Timeout</entry> - <entry/> - <entry>X</entry> - <entry/> - <entry>X</entry> - <entry>X</entry> - <entry/> - <entry/> - </row> - <row> - <entry>Watchdog</entry> - <entry/> - <entry>X</entry> - <entry/> - <entry>X</entry> - <entry>X</entry> - <entry/> - <entry>X</entry> - </row> - </tbody> - </tgroup> - </table> - - <para>As exceptions to the setting above, the service will not - be restarted if the exit code or signal is specified in - <varname>RestartPreventExitStatus=</varname> (see below). - Also, the services will always be restarted if the exit code - or signal is specified in - <varname>RestartForceExitStatus=</varname> (see below).</para> - - <para>Setting this to <option>on-failure</option> is the - recommended choice for long-running services, in order to - increase reliability by attempting automatic recovery from - errors. For services that shall be able to terminate on their - own choice (and avoid immediate restarting), - <option>on-abnormal</option> is an alternative choice.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>SuccessExitStatus=</varname></term> - <listitem><para>Takes a list of exit status definitions that, - when returned by the main service process, will be considered - successful termination, in addition to the normal successful - exit code 0 and the signals <constant>SIGHUP</constant>, - <constant>SIGINT</constant>, <constant>SIGTERM</constant>, and - <constant>SIGPIPE</constant>. Exit status definitions can - either be numeric exit codes or termination signal names, - separated by spaces. For example: - - <programlisting>SuccessExitStatus=1 2 8 SIGKILL</programlisting> - - ensures that exit codes 1, 2, 8 and - the termination signal <constant>SIGKILL</constant> are - considered clean service terminations. - </para> - - <para>Note that if a process has a signal handler installed - and exits by calling - <citerefentry><refentrytitle>_exit</refentrytitle><manvolnum>2</manvolnum></citerefentry> - in response to a signal, the information about the signal is - lost. Programs should instead perform cleanup and kill - themselves with the same signal instead. See - <ulink url="http://www.cons.org/cracauer/sigint.html">Proper - handling of SIGINT/SIGQUIT — How to be a proper - program</ulink>.</para> - - <para>This option may appear more than once, in which case the - list of successful exit statuses is merged. If the empty - string is assigned to this option, the list is reset, all - prior assignments of this option will have no - effect.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RestartPreventExitStatus=</varname></term> - <listitem><para>Takes a list of exit status definitions that, - when returned by the main service process, will prevent - automatic service restarts, regardless of the restart setting - configured with <varname>Restart=</varname>. Exit status - definitions can either be numeric exit codes or termination - signal names, and are separated by spaces. Defaults to the - empty list, so that, by default, no exit status is excluded - from the configured restart logic. For example: - - <programlisting>RestartPreventExitStatus=1 6 SIGABRT</programlisting> - - ensures that exit codes 1 and 6 and the termination signal - <constant>SIGABRT</constant> will not result in automatic - service restarting. This option may appear more than once, in - which case the list of restart-preventing statuses is - merged. If the empty string is assigned to this option, the - list is reset and all prior assignments of this option will - have no effect.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RestartForceExitStatus=</varname></term> - <listitem><para>Takes a list of exit status definitions that, - when returned by the main service process, will force automatic - service restarts, regardless of the restart setting configured - with <varname>Restart=</varname>. The argument format is - similar to - <varname>RestartPreventExitStatus=</varname>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>PermissionsStartOnly=</varname></term> - <listitem><para>Takes a boolean argument. If true, the - permission-related execution options, as configured with - <varname>User=</varname> and similar options (see - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information), are only applied to the process started - with - <varname>ExecStart=</varname>, and not to the various other - <varname>ExecStartPre=</varname>, - <varname>ExecStartPost=</varname>, - <varname>ExecReload=</varname>, - <varname>ExecStop=</varname>, and - <varname>ExecStopPost=</varname> - commands. If false, the setting is applied to all configured - commands the same way. Defaults to false.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RootDirectoryStartOnly=</varname></term> - <listitem><para>Takes a boolean argument. If true, the root - directory, as configured with the - <varname>RootDirectory=</varname> option (see - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information), is only applied to the process started - with <varname>ExecStart=</varname>, and not to the various - other <varname>ExecStartPre=</varname>, - <varname>ExecStartPost=</varname>, - <varname>ExecReload=</varname>, <varname>ExecStop=</varname>, - and <varname>ExecStopPost=</varname> commands. If false, the - setting is applied to all configured commands the same way. - Defaults to false.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>NonBlocking=</varname></term> - <listitem><para>Set the <constant>O_NONBLOCK</constant> flag - for all file descriptors passed via socket-based activation. - If true, all file descriptors >= 3 (i.e. all except stdin, - stdout, and stderr) will have the - <constant>O_NONBLOCK</constant> flag set and hence are in - non-blocking mode. This option is only useful in conjunction - with a socket unit, as described in - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - Defaults to false.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>NotifyAccess=</varname></term> - <listitem><para>Controls access to the service status - notification socket, as accessible via the - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call. Takes one of <option>none</option> (the default), - <option>main</option> or <option>all</option>. If - <option>none</option>, no daemon status updates are accepted - from the service processes, all status update messages are - ignored. If <option>main</option>, only service updates sent - from the main process of the service are accepted. If - <option>all</option>, all services updates from all members of - the service's control group are accepted. This option should - be set to open access to the notification socket when using - <varname>Type=notify</varname> or - <varname>WatchdogSec=</varname> (see above). If those options - are used but <varname>NotifyAccess=</varname> is not - configured, it will be implicitly set to - <option>main</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Sockets=</varname></term> - <listitem><para>Specifies the name of the socket units this - service shall inherit socket file descriptors from when the - service is started. Normally, it should not be necessary to use - this setting, as all socket file descriptors whose unit shares - the same name as the service (subject to the different unit - name suffix of course) are passed to the spawned - process.</para> - - <para>Note that the same socket file descriptors may be passed - to multiple processes simultaneously. Also note that a - different service may be activated on incoming socket traffic - than the one which is ultimately configured to inherit the - socket file descriptors. Or, in other words: the - <varname>Service=</varname> setting of - <filename>.socket</filename> units does not have to match the - inverse of the <varname>Sockets=</varname> setting of the - <filename>.service</filename> it refers to.</para> - - <para>This option may appear more than once, in which case the - list of socket units is merged. If the empty string is - assigned to this option, the list of sockets is reset, and all - prior uses of this setting will have no - effect.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>FailureAction=</varname></term> - <listitem><para>Configure the action to take when the service enters a failed state. Takes the same values as - the unit setting <varname>StartLimitAction=</varname> and executes the same actions (see - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>). Defaults to - <option>none</option>. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>FileDescriptorStoreMax=</varname></term> - <listitem><para>Configure how many file descriptors may be - stored in the service manager for the service using - <citerefentry><refentrytitle>sd_pid_notify_with_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>'s - <literal>FDSTORE=1</literal> messages. This is useful for - implementing service restart schemes where the state is - serialized to <filename>/run</filename> and the file - descriptors passed to the service manager, to allow restarts - without losing state. Defaults to 0, i.e. no file descriptors - may be stored in the service manager by default. All file - descriptors passed to the service manager from a specific - service are passed back to the service's main process on the - next service restart. Any file descriptors passed to the - service manager are automatically closed when POLLHUP or - POLLERR is seen on them, or when the service is fully stopped - and no job queued or being executed for it.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>USBFunctionDescriptors=</varname></term> - <listitem><para>Configure the location of a file containing - <ulink - url="https://www.kernel.org/doc/Documentation/usb/functionfs.txt">USB - FunctionFS</ulink> descriptors, for implementation of USB - gadget functions. This is used only in conjunction with a - socket unit with <varname>ListenUSBFunction=</varname> - configured. The contents of this file are written to the - <filename>ep0</filename> file after it is - opened.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>USBFunctionStrings=</varname></term> - <listitem><para>Configure the location of a file containing - USB FunctionFS strings. Behavior is similar to - <varname>USBFunctionDescriptors=</varname> - above.</para></listitem> - </varlistentry> - - </variablelist> - - <para>Check - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more settings.</para> - - </refsect1> - - <refsect1> - <title>Command lines</title> - - <para>This section describes command line parsing and - variable and specifier substitutions for - <varname>ExecStart=</varname>, - <varname>ExecStartPre=</varname>, - <varname>ExecStartPost=</varname>, - <varname>ExecReload=</varname>, - <varname>ExecStop=</varname>, and - <varname>ExecStopPost=</varname> options.</para> - - <para>Multiple command lines may be concatenated in a single - directive by separating them with semicolons (these semicolons - must be passed as separate words). Lone semicolons may be escaped - as <literal>\;</literal>.</para> - - <para>Each command line is split on whitespace, with the first - item being the command to execute, and the subsequent items being - the arguments. Double quotes ("...") and single quotes ('...') may - be used, in which case everything until the next matching quote - becomes part of the same argument. C-style escapes are also - supported. The table below contains the list of allowed escape - patterns. Only patterns which match the syntax in the table are - allowed; others will result in an error, and must be escaped by - doubling the backslash. Quotes themselves are removed after - parsing and escape sequences substituted. In addition, a trailing - backslash (<literal>\</literal>) may be used to merge lines. - </para> - - <para>This syntax is intended to be very similar to shell syntax, - but only the meta-characters and expansions described in the - following paragraphs are understood. Specifically, redirection - using - <literal><</literal>, - <literal><<</literal>, - <literal>></literal>, and - <literal>>></literal>, pipes using - <literal>|</literal>, running programs in the background using - <literal>&</literal>, and <emphasis>other elements of shell - syntax are not supported</emphasis>.</para> - - <para>The command to execute must be an absolute path name. It may - contain spaces, but control characters are not allowed.</para> - - <para>The command line accepts <literal>%</literal> specifiers as - described in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - Note that the first argument of the command line (i.e. the program - to execute) may not include specifiers.</para> - - <para>Basic environment variable substitution is supported. Use - <literal>${FOO}</literal> as part of a word, or as a word of its - own, on the command line, in which case it will be replaced by the - value of the environment variable including all whitespace it - contains, resulting in a single argument. Use - <literal>$FOO</literal> as a separate word on the command line, in - which case it will be replaced by the value of the environment - variable split at whitespace, resulting in zero or more arguments. - For this type of expansion, quotes are respected when splitting - into words, and afterwards removed.</para> - - <para>Example:</para> - - <programlisting>Environment="ONE=one" 'TWO=two two' -ExecStart=/bin/echo $ONE $TWO ${TWO}</programlisting> - - <para>This will execute <command>/bin/echo</command> with four - arguments: <literal>one</literal>, <literal>two</literal>, - <literal>two</literal>, and <literal>two two</literal>.</para> - - <para>Example:</para> - <programlisting>Environment=ONE='one' "TWO='two two' too" THREE= -ExecStart=/bin/echo ${ONE} ${TWO} ${THREE} -ExecStart=/bin/echo $ONE $TWO $THREE</programlisting> - <para>This results in <filename>echo</filename> being - called twice, the first time with arguments - <literal>'one'</literal>, - <literal>'two two' too</literal>, <literal></literal>, - and the second time with arguments - <literal>one</literal>, <literal>two two</literal>, - <literal>too</literal>. - </para> - - <para>To pass a literal dollar sign, use <literal>$$</literal>. - Variables whose value is not known at expansion time are treated - as empty strings. Note that the first argument (i.e. the program - to execute) may not be a variable.</para> - - <para>Variables to be used in this fashion may be defined through - <varname>Environment=</varname> and - <varname>EnvironmentFile=</varname>. In addition, variables listed - in the section "Environment variables in spawned processes" in - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - which are considered "static configuration", may be used (this - includes e.g. <varname>$USER</varname>, but not - <varname>$TERM</varname>).</para> - - <para>Note that shell command lines are not directly supported. If - shell command lines are to be used, they need to be passed - explicitly to a shell implementation of some kind. Example:</para> - <programlisting>ExecStart=/bin/sh -c 'dmesg | tac'</programlisting> - - <para>Example:</para> - - <programlisting>ExecStart=/bin/echo one ; /bin/echo "two two"</programlisting> - - <para>This will execute <command>/bin/echo</command> two times, - each time with one argument: <literal>one</literal> and - <literal>two two</literal>, respectively. Because two commands are - specified, <varname>Type=oneshot</varname> must be used.</para> - - <para>Example:</para> - - <programlisting>ExecStart=/bin/echo / >/dev/null & \; \ -/bin/ls</programlisting> - - <para>This will execute <command>/bin/echo</command> - with five arguments: <literal>/</literal>, - <literal>>/dev/null</literal>, - <literal>&</literal>, <literal>;</literal>, and - <literal>/bin/ls</literal>.</para> - - <table> - <title>C escapes supported in command lines and environment variables</title> - <tgroup cols='2'> - <colspec colname='escape' /> - <colspec colname='meaning' /> - <thead> - <row> - <entry>Literal</entry> - <entry>Actual value</entry> - </row> - </thead> - <tbody> - <row> - <entry><literal>\a</literal></entry> - <entry>bell</entry> - </row> - <row> - <entry><literal>\b</literal></entry> - <entry>backspace</entry> - </row> - <row> - <entry><literal>\f</literal></entry> - <entry>form feed</entry> - </row> - <row> - <entry><literal>\n</literal></entry> - <entry>newline</entry> - </row> - <row> - <entry><literal>\r</literal></entry> - <entry>carriage return</entry> - </row> - <row> - <entry><literal>\t</literal></entry> - <entry>tab</entry> - </row> - <row> - <entry><literal>\v</literal></entry> - <entry>vertical tab</entry> - </row> - <row> - <entry><literal>\\</literal></entry> - <entry>backslash</entry> - </row> - <row> - <entry><literal>\"</literal></entry> - <entry>double quotation mark</entry> - </row> - <row> - <entry><literal>\'</literal></entry> - <entry>single quotation mark</entry> - </row> - <row> - <entry><literal>\s</literal></entry> - <entry>space</entry> - </row> - <row> - <entry><literal>\x<replaceable>xx</replaceable></literal></entry> - <entry>character number <replaceable>xx</replaceable> in hexadecimal encoding</entry> - </row> - <row> - <entry><literal>\<replaceable>nnn</replaceable></literal></entry> - <entry>character number <replaceable>nnn</replaceable> in octal encoding</entry> - </row> - </tbody> - </tgroup> - </table> - </refsect1> - - <refsect1> - <title>Examples</title> - - <example> - <title>Simple service</title> - - <para>The following unit file creates a service that will - execute <filename>/usr/sbin/foo-daemon</filename>. Since no - <varname>Type=</varname> is specified, the default - <varname>Type=</varname><option>simple</option> will be assumed. - systemd will assume the unit to be started immediately after the - program has begun executing.</para> - - <programlisting>[Unit] -Description=Foo - -[Service] -ExecStart=/usr/sbin/foo-daemon - -[Install] -WantedBy=multi-user.target</programlisting> - - <para>Note that systemd assumes here that the process started by - systemd will continue running until the service terminates. If - the program daemonizes itself (i.e. forks), please use - <varname>Type=</varname><option>forking</option> instead.</para> - - <para>Since no <varname>ExecStop=</varname> was specified, - systemd will send SIGTERM to all processes started from this - service, and after a timeout also SIGKILL. This behavior can be - modified, see - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para> - - <para>Note that this unit type does not include any type of - notification when a service has completed initialization. For - this, you should use other unit types, such as - <varname>Type=</varname><option>notify</option> if the service - understands systemd's notification protocol, - <varname>Type=</varname><option>forking</option> if the service - can background itself or - <varname>Type=</varname><option>dbus</option> if the unit - acquires a DBus name once initialization is complete. See - below.</para> - </example> - - <example> - <title>Oneshot service</title> - - <para>Sometimes, units should just execute an action without - keeping active processes, such as a filesystem check or a - cleanup action on boot. For this, - <varname>Type=</varname><option>oneshot</option> exists. Units - of this type will wait until the process specified terminates - and then fall back to being inactive. The following unit will - perform a cleanup action:</para> - - <programlisting>[Unit] -Description=Cleanup old Foo data - -[Service] -Type=oneshot -ExecStart=/usr/sbin/foo-cleanup - -[Install] -WantedBy=multi-user.target</programlisting> - - <para>Note that systemd will consider the unit to be in the - state "starting" until the program has terminated, so ordered - dependencies will wait for the program to finish before starting - themselves. The unit will revert to the "inactive" state after - the execution is done, never reaching the "active" state. That - means another request to start the unit will perform the action - again.</para> - - <para><varname>Type=</varname><option>oneshot</option> are the - only service units that may have more than one - <varname>ExecStart=</varname> specified. They will be executed - in order until either they are all successful or one of them - fails.</para> - </example> - - <example> - <title>Stoppable oneshot service</title> - - <para>Similarly to the oneshot services, there are sometimes - units that need to execute a program to set up something and - then execute another to shut it down, but no process remains - active while they are considered "started". Network - configuration can sometimes fall into this category. Another use - case is if a oneshot service shall not be executed each time - when they are pulled in as a dependency, but only the first - time.</para> - - <para>For this, systemd knows the setting - <varname>RemainAfterExit=</varname><option>yes</option>, which - causes systemd to consider the unit to be active if the start - action exited successfully. This directive can be used with all - types, but is most useful with - <varname>Type=</varname><option>oneshot</option> and - <varname>Type=</varname><option>simple</option>. With - <varname>Type=</varname><option>oneshot</option>, systemd waits - until the start action has completed before it considers the - unit to be active, so dependencies start only after the start - action has succeeded. With - <varname>Type=</varname><option>simple</option>, dependencies - will start immediately after the start action has been - dispatched. The following unit provides an example for a simple - static firewall.</para> - - <programlisting>[Unit] -Description=Simple firewall - -[Service] -Type=oneshot -RemainAfterExit=yes -ExecStart=/usr/local/sbin/simple-firewall-start -ExecStop=/usr/local/sbin/simple-firewall-stop - -[Install] -WantedBy=multi-user.target</programlisting> - - <para>Since the unit is considered to be running after the start - action has exited, invoking <command>systemctl start</command> - on that unit again will cause no action to be taken.</para> - </example> - - <example> - <title>Traditional forking services</title> - - <para>Many traditional daemons/services background (i.e. fork, - daemonize) themselves when starting. Set - <varname>Type=</varname><option>forking</option> in the - service's unit file to support this mode of operation. systemd - will consider the service to be in the process of initialization - while the original program is still running. Once it exits - successfully and at least a process remains (and - <varname>RemainAfterExit=</varname><option>no</option>), the - service is considered started.</para> - - <para>Often, a traditional daemon only consists of one process. - Therefore, if only one process is left after the original - process terminates, systemd will consider that process the main - process of the service. In that case, the - <varname>$MAINPID</varname> variable will be available in - <varname>ExecReload=</varname>, <varname>ExecStop=</varname>, - etc.</para> - - <para>In case more than one process remains, systemd will be - unable to determine the main process, so it will not assume - there is one. In that case, <varname>$MAINPID</varname> will not - expand to anything. However, if the process decides to write a - traditional PID file, systemd will be able to read the main PID - from there. Please set <varname>PIDFile=</varname> accordingly. - Note that the daemon should write that file before finishing - with its initialization. Otherwise, systemd might try to read the - file before it exists.</para> - - <para>The following example shows a simple daemon that forks and - just starts one process in the background:</para> - - <programlisting>[Unit] -Description=Some simple daemon - -[Service] -Type=forking -ExecStart=/usr/sbin/my-simple-daemon -d - -[Install] -WantedBy=multi-user.target</programlisting> - - <para>Please see - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details on how you can influence the way systemd terminates - the service.</para> - </example> - - <example> - <title>DBus services</title> - - <para>For services that acquire a name on the DBus system bus, - use <varname>Type=</varname><option>dbus</option> and set - <varname>BusName=</varname> accordingly. The service should not - fork (daemonize). systemd will consider the service to be - initialized once the name has been acquired on the system bus. - The following example shows a typical DBus service:</para> - - <programlisting>[Unit] -Description=Simple DBus service - -[Service] -Type=dbus -BusName=org.example.simple-dbus-service -ExecStart=/usr/sbin/simple-dbus-service - -[Install] -WantedBy=multi-user.target</programlisting> - - <para>For <emphasis>bus-activatable</emphasis> services, do not - include a <literal>[Install]</literal> section in the systemd - service file, but use the <varname>SystemdService=</varname> - option in the corresponding DBus service file, for example - (<filename>/usr/share/dbus-1/system-services/org.example.simple-dbus-service.service</filename>):</para> - - <programlisting>[D-BUS Service] -Name=org.example.simple-dbus-service -Exec=/usr/sbin/simple-dbus-service -User=root -SystemdService=simple-dbus-service.service</programlisting> - - <para>Please see - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details on how you can influence the way systemd terminates - the service.</para> - </example> - - <example> - <title>Services that notify systemd about their initialization</title> - - <para><varname>Type=</varname><option>simple</option> services - are really easy to write, but have the major disadvantage of - systemd not being able to tell when initialization of the given - service is complete. For this reason, systemd supports a simple - notification protocol that allows daemons to make systemd aware - that they are done initializing. Use - <varname>Type=</varname><option>notify</option> for this. A - typical service file for such a daemon would look like - this:</para> - - <programlisting>[Unit] -Description=Simple notifying service - -[Service] -Type=notify -ExecStart=/usr/sbin/simple-notifying-service - -[Install] -WantedBy=multi-user.target</programlisting> - - <para>Note that the daemon has to support systemd's notification - protocol, else systemd will think the service has not started yet - and kill it after a timeout. For an example of how to update - daemons to support this protocol transparently, take a look at - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>. - systemd will consider the unit to be in the 'starting' state - until a readiness notification has arrived.</para> - - <para>Please see - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details on how you can influence the way systemd terminates - the service.</para> - </example> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.slice.xml b/man/systemd.slice.xml deleted file mode 100644 index eee98d99ee..0000000000 --- a/man/systemd.slice.xml +++ /dev/null @@ -1,132 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" -"http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2013 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.slice"> - <refentryinfo> - <title>systemd.slice</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.slice</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.slice</refname> - <refpurpose>Slice unit configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>slice</replaceable>.slice</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>A unit configuration file whose name ends in - <literal>.slice</literal> encodes information about a slice which - is a concept for hierarchically managing resources of a group of - processes. This management is performed by creating a node in the - Linux Control Group (cgroup) tree. Units that manage processes - (primarily scope and service units) may be assigned to a specific - slice. For each slice, certain resource limits may be set that - apply to all processes of all units contained in that - slice. Slices are organized hierarchically in a tree. The name of - the slice encodes the location in the tree. The name consists of a - dash-separated series of names, which describes the path to the - slice from the root slice. The root slice is named, - <filename>-.slice</filename>. Example: - <filename>foo-bar.slice</filename> is a slice that is located - within <filename>foo.slice</filename>, which in turn is located in - the root slice <filename>-.slice</filename>. - </para> - - <para>Note that slice units cannot be templated, nor is possible to add multiple names to a slice unit by creating - additional symlinks to it.</para> - - <para>By default, service and scope units are placed in - <filename>system.slice</filename>, virtual machines and containers - registered with - <citerefentry><refentrytitle>systemd-machined</refentrytitle><manvolnum>1</manvolnum></citerefentry> - are found in <filename>machine.slice</filename>, and user sessions - handled by - <citerefentry><refentrytitle>systemd-logind</refentrytitle><manvolnum>1</manvolnum></citerefentry> - in <filename>user.slice</filename>. See - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information.</para> - - <para>See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for the common options of all unit configuration - files. The common configuration items are configured - in the generic [Unit] and [Install] sections. The - slice specific configuration options are configured in - the [Slice] section. Currently, only generic resource control settings - as described in - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry> are allowed. - </para> - - <para>See the <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/ControlGroupInterface/">New - Control Group Interfaces</ulink> for an introduction on how to make - use of slice units from programs.</para> - </refsect1> - - <refsect1> - <title>Automatic Dependencies</title> - - <para>Slice units automatically gain dependencies of type - <varname>After=</varname> and <varname>Requires=</varname> on - their immediate parent slice unit.</para> - - <para>Unless <varname>DefaultDependencies=false</varname> is used in the <literal>[Unit]</literal> section, slice - units will implicitly have dependencies of type <varname>Conflicts=</varname> and <varname>Before=</varname> on - <filename>shutdown.target</filename>. These ensure that slice units are removed prior to system shutdown. Only - slice units involved with early boot or late system shutdown should disable this option. - </para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.socket.xml b/man/systemd.socket.xml deleted file mode 100644 index 5bf54d8ef3..0000000000 --- a/man/systemd.socket.xml +++ /dev/null @@ -1,860 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.socket"> - <refentryinfo> - <title>systemd.socket</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.socket</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.socket</refname> - <refpurpose>Socket unit configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>socket</replaceable>.socket</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>A unit configuration file whose name ends in - <literal>.socket</literal> encodes information about an IPC or - network socket or a file system FIFO controlled and supervised by - systemd, for socket-based activation.</para> - - <para>This man page lists the configuration options specific to - this unit type. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for the common options of all unit configuration files. The common - configuration items are configured in the generic [Unit] and - [Install] sections. The socket specific configuration options are - configured in the [Socket] section.</para> - - <para>Additional options are listed in - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - which define the execution environment the - <option>ExecStartPre=</option>, <option>ExecStartPost=</option>, - <option>ExecStopPre=</option> and <option>ExecStopPost=</option> - commands are executed in, and in - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - which define the way the processes are terminated, and in - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - which configure resource control settings for the processes of the - socket.</para> - - <para>For each socket file, a matching service file must exist, - describing the service to start on incoming traffic on the socket - (see - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information about .service files). The name of the - .service unit is by default the same as the name of the .socket - unit, but can be altered with the <option>Service=</option> option - described below. Depending on the setting of the - <option>Accept=</option> option described below, this .service - unit must either be named like the .socket unit, but with the - suffix replaced, unless overridden with <option>Service=</option>; - or it must be a template unit named the same way. Example: a - socket file <filename>foo.socket</filename> needs a matching - service <filename>foo.service</filename> if - <option>Accept=false</option> is set. If - <option>Accept=true</option> is set, a service template file - <filename>foo@.service</filename> must exist from which services - are instantiated for each incoming connection.</para> - - <para>Unless <varname>DefaultDependencies=</varname> in the <literal>[Unit]</literal> section is set to - <option>false</option>, socket units will implicitly have dependencies of type <varname>Requires=</varname> and - <varname>After=</varname> on <filename>sysinit.target</filename> as well as dependencies of type - <varname>Conflicts=</varname> and <varname>Before=</varname> on <filename>shutdown.target</filename>. These ensure - that socket units pull in basic system initialization, and are terminated cleanly prior to system shutdown. Only - sockets involved with early boot or late system shutdown should disable this option.</para> - - <para>Socket units will have a <varname>Before=</varname> - dependency on the service which they trigger added implicitly. No - implicit <varname>WantedBy=</varname> or - <varname>RequiredBy=</varname> dependency from the socket to the - service is added. This means that the service may be started - without the socket, in which case it must be able to open sockets - by itself. To prevent this, an explicit - <varname>Requires=</varname> dependency may be added.</para> - - <para>Socket units may be used to implement on-demand starting of - services, as well as parallelized starting of services. See the - blog stories linked at the end for an introduction.</para> - - <para>Note that the daemon software configured for socket - activation with socket units needs to be able to accept sockets - from systemd, either via systemd's native socket passing interface - (see - <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for details) or via the traditional - <citerefentry project='freebsd'><refentrytitle>inetd</refentrytitle><manvolnum>8</manvolnum></citerefentry>-style - socket passing (i.e. sockets passed in via standard input and - output, using <varname>StandardInput=socket</varname> in the - service file).</para> - </refsect1> - - <refsect1> - <title>Automatic Dependencies</title> - - <para>Socket units automatically gain a <varname>Before=</varname> - dependency on the service units they activate.</para> - - <para>Socket units referring to file system paths (such as AF_UNIX - sockets or FIFOs) implicitly gain <varname>Requires=</varname> and - <varname>After=</varname> dependencies on all mount units - necessary to access those paths.</para> - - <para>Socket units using the <varname>BindToDevice=</varname> - setting automatically gain a <varname>BindsTo=</varname> and - <varname>After=</varname> dependency on the device unit - encapsulating the specified network interface.</para> - - <para>If <varname>DefaultDependencies=yes</varname> is set (the - default), socket units automatically gain a - <varname>Before=</varname> dependency on - <filename>sockets.target</filename>. They also gain a pair of - <varname>After=</varname> and <varname>Requires=</varname> - dependency on <filename>sysinit.target</filename>, and a pair of - <varname>Before=</varname> and <varname>Conflicts=</varname> - dependencies on <filename>shutdown.target</filename>. These - dependencies ensure that the socket unit is started before normal - services at boot, and is stopped on shutdown.</para> - - <para>Additional implicit dependencies may be added as result of - execution and resource control parameters as documented in - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>Socket files must include a [Socket] section, which carries - information about the socket or FIFO it supervises. A number of - options that may be used in this section are shared with other - unit types. These options are documented in - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - The options specific to the [Socket] section of socket units are - the following:</para> - - <variablelist class='unit-directives'> - <varlistentry> - <term><varname>ListenStream=</varname></term> - <term><varname>ListenDatagram=</varname></term> - <term><varname>ListenSequentialPacket=</varname></term> - <listitem><para>Specifies an address to listen on for a stream - (<constant>SOCK_STREAM</constant>), datagram - (<constant>SOCK_DGRAM</constant>), or sequential packet - (<constant>SOCK_SEQPACKET</constant>) socket, respectively. - The address can be written in various formats:</para> - - <para>If the address starts with a slash - (<literal>/</literal>), it is read as file system socket in - the <constant>AF_UNIX</constant> socket family.</para> - - <para>If the address starts with an at symbol - (<literal>@</literal>), it is read as abstract namespace - socket in the <constant>AF_UNIX</constant> family. The - <literal>@</literal> is replaced with a - <constant>NUL</constant> character before binding. For - details, see - <citerefentry project='man-pages'><refentrytitle>unix</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - - <para>If the address string is a single number, it is read as - port number to listen on via IPv6. Depending on the value of - <varname>BindIPv6Only=</varname> (see below) this might result - in the service being available via both IPv6 and IPv4 - (default) or just via IPv6. - </para> - - <para>If the address string is a string in the format - v.w.x.y:z, it is read as IPv4 specifier for listening on an - address v.w.x.y on a port z.</para> - - <para>If the address string is a string in the format [x]:y, - it is read as IPv6 address x on a port y. Note that this might - make the service available via IPv4, too, depending on the - <varname>BindIPv6Only=</varname> setting (see below). - </para> - - <para>Note that <constant>SOCK_SEQPACKET</constant> (i.e. - <varname>ListenSequentialPacket=</varname>) is only available - for <constant>AF_UNIX</constant> sockets. - <constant>SOCK_STREAM</constant> (i.e. - <varname>ListenStream=</varname>) when used for IP sockets - refers to TCP sockets, <constant>SOCK_DGRAM</constant> (i.e. - <varname>ListenDatagram=</varname>) to UDP.</para> - - <para>These options may be specified more than once, in which - case incoming traffic on any of the sockets will trigger - service activation, and all listed sockets will be passed to - the service, regardless of whether there is incoming traffic - on them or not. If the empty string is assigned to any of - these options, the list of addresses to listen on is reset, - all prior uses of any of these options will have no - effect.</para> - - <para>It is also possible to have more than one socket unit - for the same service when using <varname>Service=</varname>, - and the service will receive all the sockets configured in all - the socket units. Sockets configured in one unit are passed in - the order of configuration, but no ordering between socket - units is specified.</para> - - <para>If an IP address is used here, it is often desirable to - listen on it before the interface it is configured on is up - and running, and even regardless of whether it will be up and - running at any point. To deal with this, it is recommended to - set the <varname>FreeBind=</varname> option described - below.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ListenFIFO=</varname></term> - <listitem><para>Specifies a file system FIFO to listen on. - This expects an absolute file system path as argument. - Behavior otherwise is very similar to the - <varname>ListenDatagram=</varname> directive - above.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ListenSpecial=</varname></term> - <listitem><para>Specifies a special file in the file system to - listen on. This expects an absolute file system path as - argument. Behavior otherwise is very similar to the - <varname>ListenFIFO=</varname> directive above. Use this to - open character device nodes as well as special files in - <filename>/proc</filename> and - <filename>/sys</filename>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ListenNetlink=</varname></term> - <listitem><para>Specifies a Netlink family to create a socket - for to listen on. This expects a short string referring to the - <constant>AF_NETLINK</constant> family name (such as - <varname>audit</varname> or <varname>kobject-uevent</varname>) - as argument, optionally suffixed by a whitespace followed by a - multicast group integer. Behavior otherwise is very similar to - the <varname>ListenDatagram=</varname> directive - above.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ListenMessageQueue=</varname></term> - <listitem><para>Specifies a POSIX message queue name to listen - on. This expects a valid message queue name (i.e. beginning - with /). Behavior otherwise is very similar to the - <varname>ListenFIFO=</varname> directive above. On Linux - message queue descriptors are actually file descriptors and - can be inherited between processes.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ListenUSBFunction=</varname></term> - <listitem><para>Specifies a <ulink - url="https://www.kernel.org/doc/Documentation/usb/functionfs.txt">USB - FunctionFS</ulink> endpoint location to listen on, for - implementation of USB gadget functions. This expects an - absolute file system path as the argument. Behavior otherwise - is very similar to the <varname>ListenFIFO=</varname> - directive above. Use this to open the FunctionFS endpoint - <filename>ep0</filename>. When using this option, the - activated service has to have the - <varname>USBFunctionDescriptors=</varname> and - <varname>USBFunctionStrings=</varname> options set. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SocketProtocol=</varname></term> - <listitem><para>Takes a one of <option>udplite</option> - or <option>sctp</option>. Specifies a socket protocol - (<constant>IPPROTO_UDPLITE</constant>) UDP-Lite - (<constant>IPPROTO_SCTP</constant>) SCTP socket respectively. </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>BindIPv6Only=</varname></term> - <listitem><para>Takes a one of <option>default</option>, - <option>both</option> or <option>ipv6-only</option>. Controls - the IPV6_V6ONLY socket option (see - <citerefentry project='die-net'><refentrytitle>ipv6</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details). If <option>both</option>, IPv6 sockets bound - will be accessible via both IPv4 and IPv6. If - <option>ipv6-only</option>, they will be accessible via IPv6 - only. If <option>default</option> (which is the default, - surprise!), the system wide default setting is used, as - controlled by - <filename>/proc/sys/net/ipv6/bindv6only</filename>, which in - turn defaults to the equivalent of - <option>both</option>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>Backlog=</varname></term> - <listitem><para>Takes an unsigned integer argument. Specifies - the number of connections to queue that have not been accepted - yet. This setting matters only for stream and sequential - packet sockets. See - <citerefentry><refentrytitle>listen</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details. Defaults to SOMAXCONN (128).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>BindToDevice=</varname></term> - <listitem><para>Specifies a network interface name to bind - this socket to. If set, traffic will only be accepted from the - specified network interfaces. This controls the - SO_BINDTODEVICE socket option (see <citerefentry - project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details). If this option is used, an automatic dependency - from this socket unit on the network interface device unit - (<citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry> - is created. Note that setting this parameter might result in - additional dependencies to be added to the unit (see - above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SocketUser=</varname></term> - <term><varname>SocketGroup=</varname></term> - - <listitem><para>Takes a UNIX user/group name. When specified, - all AF_UNIX sockets and FIFO nodes in the file system are - owned by the specified user and group. If unset (the default), - the nodes are owned by the root user/group (if run in system - context) or the invoking user/group (if run in user context). - If only a user is specified but no group, then the group is - derived from the user's default group.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SocketMode=</varname></term> - <listitem><para>If listening on a file system socket or FIFO, - this option specifies the file system access mode used when - creating the file node. Takes an access mode in octal - notation. Defaults to 0666.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DirectoryMode=</varname></term> - <listitem><para>If listening on a file system socket or FIFO, - the parent directories are automatically created if needed. - This option specifies the file system access mode used when - creating these directories. Takes an access mode in octal - notation. Defaults to 0755.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Accept=</varname></term> - <listitem><para>Takes a boolean argument. If true, a service - instance is spawned for each incoming connection and only the - connection socket is passed to it. If false, all listening - sockets themselves are passed to the started service unit, and - only one service unit is spawned for all connections (also see - above). This value is ignored for datagram sockets and FIFOs - where a single service unit unconditionally handles all - incoming traffic. Defaults to <option>false</option>. For - performance reasons, it is recommended to write new daemons - only in a way that is suitable for - <option>Accept=false</option>. A daemon listening on an - <constant>AF_UNIX</constant> socket may, but does not need to, - call - <citerefentry><refentrytitle>close</refentrytitle><manvolnum>2</manvolnum></citerefentry> - on the received socket before exiting. However, it must not - unlink the socket from a file system. It should not invoke - <citerefentry><refentrytitle>shutdown</refentrytitle><manvolnum>2</manvolnum></citerefentry> - on sockets it got with <varname>Accept=false</varname>, but it - may do so for sockets it got with - <varname>Accept=true</varname> set. Setting - <varname>Accept=true</varname> is mostly useful to allow - daemons designed for usage with - <citerefentry project='freebsd'><refentrytitle>inetd</refentrytitle><manvolnum>8</manvolnum></citerefentry> - to work unmodified with systemd socket - activation.</para> - - <para>For IPv4 and IPv6 connections, the <varname>REMOTE_ADDR</varname> - environment variable will contain the remote IP address, and <varname>REMOTE_PORT</varname> - will contain the remote port. This is the same as the format used by CGI. - For SOCK_RAW, the port is the IP protocol.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Writable=</varname></term> - <listitem><para>Takes a boolean argument. May only be used in - conjunction with <varname>ListenSpecial=</varname>. If true, - the specified special file is opened in read-write mode, if - false, in read-only mode. Defaults to false.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>MaxConnections=</varname></term> - <listitem><para>The maximum number of connections to - simultaneously run services instances for, when - <option>Accept=true</option> is set. If more concurrent - connections are coming in, they will be refused until at least - one existing connection is terminated. This setting has no - effect on sockets configured with - <option>Accept=false</option> or datagram sockets. Defaults to - 64.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>KeepAlive=</varname></term> - <listitem><para>Takes a boolean argument. If true, the TCP/IP - stack will send a keep alive message after 2h (depending on - the configuration of - <filename>/proc/sys/net/ipv4/tcp_keepalive_time</filename>) - for all TCP streams accepted on this socket. This controls the - SO_KEEPALIVE socket option (see - <citerefentry project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry> - and the <ulink - url="http://www.tldp.org/HOWTO/html_single/TCP-Keepalive-HOWTO/">TCP - Keepalive HOWTO</ulink> for details.) Defaults to - <option>false</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>KeepAliveTimeSec=</varname></term> - <listitem><para>Takes time (in seconds) as argument. The connection needs to remain - idle before TCP starts sending keepalive probes. This controls the TCP_KEEPIDLE - socket option (see - <citerefentry project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry> - and the <ulink - url="http://www.tldp.org/HOWTO/html_single/TCP-Keepalive-HOWTO/">TCP - Keepalive HOWTO</ulink> for details.) - Defaults value is 7200 seconds (2 hours).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>KeepAliveIntervalSec=</varname></term> - <listitem><para>Takes time (in seconds) as argument between - individual keepalive probes, if the socket option SO_KEEPALIVE - has been set on this socket. This controls - the TCP_KEEPINTVL socket option (see - <citerefentry project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry> - and the <ulink - url="http://www.tldp.org/HOWTO/html_single/TCP-Keepalive-HOWTO/">TCP - Keepalive HOWTO</ulink> for details.) Defaults value is 75 - seconds.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>KeepAliveProbes=</varname></term> - <listitem><para>Takes an integer as argument. It is the number of - unacknowledged probes to send before considering the - connection dead and notifying the application layer. This - controls the TCP_KEEPCNT socket option (see - <citerefentry project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry> - and the <ulink - url="http://www.tldp.org/HOWTO/html_single/TCP-Keepalive-HOWTO/">TCP - Keepalive HOWTO</ulink> for details.) Defaults value is - 9.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>NoDelay=</varname></term> - <listitem><para>Takes a boolean argument. TCP Nagle's - algorithm works by combining a number of small outgoing - messages, and sending them all at once. This controls the - TCP_NODELAY socket option (see - <citerefentry project='die-net'><refentrytitle>tcp</refentrytitle><manvolnum>7</manvolnum></citerefentry> - Defaults to <option>false</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Priority=</varname></term> - <listitem><para>Takes an integer argument controlling the - priority for all traffic sent from this socket. This controls - the SO_PRIORITY socket option (see - <citerefentry project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details.).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DeferAcceptSec=</varname></term> - - <listitem><para>Takes time (in seconds) as argument. If set, - the listening process will be awakened only when data arrives - on the socket, and not immediately when connection is - established. When this option is set, the - <constant>TCP_DEFER_ACCEPT</constant> socket option will be - used (see - <citerefentry project='die-net'><refentrytitle>tcp</refentrytitle><manvolnum>7</manvolnum></citerefentry>), - and the kernel will ignore initial ACK packets without any - data. The argument specifies the approximate amount of time - the kernel should wait for incoming data before falling back - to the normal behavior of honouring empty ACK packets. This - option is beneficial for protocols where the client sends the - data first (e.g. HTTP, in contrast to SMTP), because the - server process will not be woken up unnecessarily before it - can take any action. - </para> - - <para>If the client also uses the - <constant>TCP_DEFER_ACCEPT</constant> option, the latency of - the initial connection may be reduced, because the kernel will - send data in the final packet establishing the connection (the - third packet in the "three-way handshake").</para> - - <para>Disabled by default.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>ReceiveBuffer=</varname></term> - <term><varname>SendBuffer=</varname></term> - <listitem><para>Takes an integer argument controlling the - receive or send buffer sizes of this socket, respectively. - This controls the SO_RCVBUF and SO_SNDBUF socket options (see - <citerefentry project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details.). The usual suffixes K, M, G are supported and - are understood to the base of 1024.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>IPTOS=</varname></term> - <listitem><para>Takes an integer argument controlling the IP - Type-Of-Service field for packets generated from this socket. - This controls the IP_TOS socket option (see - <citerefentry project='die-net'><refentrytitle>ip</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details.). Either a numeric string or one of - <option>low-delay</option>, <option>throughput</option>, - <option>reliability</option> or <option>low-cost</option> may - be specified.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>IPTTL=</varname></term> - <listitem><para>Takes an integer argument controlling the IPv4 - Time-To-Live/IPv6 Hop-Count field for packets generated from - this socket. This sets the IP_TTL/IPV6_UNICAST_HOPS socket - options (see - <citerefentry project='die-net'><refentrytitle>ip</refentrytitle><manvolnum>7</manvolnum></citerefentry> - and - <citerefentry project='die-net'><refentrytitle>ipv6</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details.)</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Mark=</varname></term> - <listitem><para>Takes an integer value. Controls the firewall - mark of packets generated by this socket. This can be used in - the firewall logic to filter packets from this socket. This - sets the SO_MARK socket option. See - <citerefentry project='die-net'><refentrytitle>iptables</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ReusePort=</varname></term> - <listitem><para>Takes a boolean value. If true, allows - multiple - <citerefentry><refentrytitle>bind</refentrytitle><manvolnum>2</manvolnum></citerefentry>s - to this TCP or UDP port. This controls the SO_REUSEPORT socket - option. See - <citerefentry project='man-pages'><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SmackLabel=</varname></term> - <term><varname>SmackLabelIPIn=</varname></term> - <term><varname>SmackLabelIPOut=</varname></term> - <listitem><para>Takes a string value. Controls the extended - attributes <literal>security.SMACK64</literal>, - <literal>security.SMACK64IPIN</literal> and - <literal>security.SMACK64IPOUT</literal>, respectively, i.e. - the security label of the FIFO, or the security label for the - incoming or outgoing connections of the socket, respectively. - See <ulink - url="https://www.kernel.org/doc/Documentation/security/Smack.txt">Smack.txt</ulink> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SELinuxContextFromNet=</varname></term> - <listitem><para>Takes a boolean argument. When true, systemd - will attempt to figure out the SELinux label used for the - instantiated service from the information handed by the peer - over the network. Note that only the security level is used - from the information provided by the peer. Other parts of the - resulting SELinux context originate from either the target - binary that is effectively triggered by socket unit or from - the value of the <varname>SELinuxContext=</varname> option. - This configuration option only affects sockets with - <varname>Accept=</varname> mode set to - <literal>true</literal>. Also note that this option is useful - only when MLS/MCS SELinux policy is deployed. Defaults to - <literal>false</literal>. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>PipeSize=</varname></term> - <listitem><para>Takes a size in bytes. Controls the pipe - buffer size of FIFOs configured in this socket unit. See - <citerefentry><refentrytitle>fcntl</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details. The usual suffixes K, M, G are supported and are - understood to the base of 1024.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>MessageQueueMaxMessages=</varname>, - <varname>MessageQueueMessageSize=</varname></term> - <listitem><para>These two settings take integer values and - control the mq_maxmsg field or the mq_msgsize field, - respectively, when creating the message queue. Note that - either none or both of these variables need to be set. See - <citerefentry project='die-net'><refentrytitle>mq_setattr</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for details.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>FreeBind=</varname></term> - <listitem><para>Takes a boolean value. Controls whether the - socket can be bound to non-local IP addresses. This is useful - to configure sockets listening on specific IP addresses before - those IP addresses are successfully configured on a network - interface. This sets the IP_FREEBIND socket option. For - robustness reasons it is recommended to use this option - whenever you bind a socket to a specific IP address. Defaults - to <option>false</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Transparent=</varname></term> - <listitem><para>Takes a boolean value. Controls the - IP_TRANSPARENT socket option. Defaults to - <option>false</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Broadcast=</varname></term> - <listitem><para>Takes a boolean value. This controls the - SO_BROADCAST socket option, which allows broadcast datagrams - to be sent from this socket. Defaults to - <option>false</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>PassCredentials=</varname></term> - <listitem><para>Takes a boolean value. This controls the - SO_PASSCRED socket option, which allows - <constant>AF_UNIX</constant> sockets to receive the - credentials of the sending process in an ancillary message. - Defaults to <option>false</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>PassSecurity=</varname></term> - <listitem><para>Takes a boolean value. This controls the - SO_PASSSEC socket option, which allows - <constant>AF_UNIX</constant> sockets to receive the security - context of the sending process in an ancillary message. - Defaults to <option>false</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>TCPCongestion=</varname></term> - <listitem><para>Takes a string value. Controls the TCP - congestion algorithm used by this socket. Should be one of - "westwood", "veno", "cubic", "lp" or any other available - algorithm supported by the IP stack. This setting applies only - to stream sockets.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ExecStartPre=</varname></term> - <term><varname>ExecStartPost=</varname></term> - <listitem><para>Takes one or more command lines, which are - executed before or after the listening sockets/FIFOs are - created and bound, respectively. The first token of the - command line must be an absolute filename, then followed by - arguments for the process. Multiple command lines may be - specified following the same scheme as used for - <varname>ExecStartPre=</varname> of service unit - files.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ExecStopPre=</varname></term> - <term><varname>ExecStopPost=</varname></term> - <listitem><para>Additional commands that are executed before - or after the listening sockets/FIFOs are closed and removed, - respectively. Multiple command lines may be specified - following the same scheme as used for - <varname>ExecStartPre=</varname> of service unit - files.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>TimeoutSec=</varname></term> - <listitem><para>Configures the time to wait for the commands - specified in <varname>ExecStartPre=</varname>, - <varname>ExecStartPost=</varname>, - <varname>ExecStopPre=</varname> and - <varname>ExecStopPost=</varname> to finish. If a command does - not exit within the configured time, the socket will be - considered failed and be shut down again. All commands still - running will be terminated forcibly via - <constant>SIGTERM</constant>, and after another delay of this - time with <constant>SIGKILL</constant>. (See - <option>KillMode=</option> in - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>.) - Takes a unit-less value in seconds, or a time span value such - as "5min 20s". Pass <literal>0</literal> to disable the - timeout logic. Defaults to - <varname>DefaultTimeoutStartSec=</varname> from the manager - configuration file (see - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>). - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Service=</varname></term> - <listitem><para>Specifies the service unit name to activate on - incoming traffic. This setting is only allowed for sockets - with <varname>Accept=no</varname>. It defaults to the service - that bears the same name as the socket (with the suffix - replaced). In most cases, it should not be necessary to use - this option. Note that setting this parameter might result in - additional dependencies to be added to the unit (see - above).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RemoveOnStop=</varname></term> - <listitem><para>Takes a boolean argument. If enabled, any file - nodes created by this socket unit are removed when it is - stopped. This applies to AF_UNIX sockets in the file system, - POSIX message queues, FIFOs, as well as any symlinks to them - configured with <varname>Symlinks=</varname>. Normally, it - should not be necessary to use this option, and is not - recommended as services might continue to run after the socket - unit has been terminated and it should still be possible to - communicate with them via their file system node. Defaults to - off.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Symlinks=</varname></term> - <listitem><para>Takes a list of file system paths. The - specified paths will be created as symlinks to the AF_UNIX - socket path or FIFO path of this socket unit. If this setting - is used, only one AF_UNIX socket in the file system or one - FIFO may be configured for the socket unit. Use this option to - manage one or more symlinked alias names for a socket, binding - their lifecycle together. Defaults to the empty - list.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>FileDescriptorName=</varname></term> - <listitem><para>Assigns a name to all file descriptors this - socket unit encapsulates. This is useful to help activated - services identify specific file descriptors, if multiple fds - are passed. Services may use the - <citerefentry><refentrytitle>sd_listen_fds_with_names</refentrytitle><manvolnum>3</manvolnum></citerefentry> - call to acquire the names configured for the received file - descriptors. Names may contain any ASCII character, but must - exclude control characters and <literal>:</literal>, and must - be at most 255 characters in length. If this setting is not - used, the file descriptor name defaults to the name of the - socket unit, including its <filename>.socket</filename> - suffix.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>TriggerLimitIntervalSec=</varname></term> - <term><varname>TriggerLimitBurst=</varname></term> - - <listitem><para>Configures a limit on how often this socket unit my be activated within a specific time - interval. The <varname>TriggerLimitIntervalSec=</varname> may be used to configure the length of the time - interval in the usual time units <literal>us</literal>, <literal>ms</literal>, <literal>s</literal>, - <literal>min</literal>, <literal>h</literal>, … and defaults to 2s (See - <citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry> for details on - the various time units understood). The <varname>TriggerLimitBurst=</varname> setting takes a positive integer - value and specifies the number of permitted activations per time interval, and defaults to 200 for - <varname>Accept=yes</varname> sockets (thus by default permitting 200 activations per 2s), and 20 otherwise (20 - activations per 2s). Set either to 0 to disable any form of trigger rate limiting. If the limit is hit, the - socket unit is placed into a failure mode, and will not be connectible anymore until restarted. Note that this - limit is enforced before the service activation is enqueued.</para></listitem> - </varlistentry> - - </variablelist> - - <para>Check - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more settings.</para> - - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd_listen_fds_with_names</refentrytitle><manvolnum>3</manvolnum></citerefentry> - </para> - <para> - For more extensive descriptions see the "systemd for Developers" series: - <ulink url="http://0pointer.de/blog/projects/socket-activation.html">Socket Activation</ulink>, - <ulink url="http://0pointer.de/blog/projects/socket-activation2.html">Socket Activation, part II</ulink>, - <ulink url="http://0pointer.de/blog/projects/inetd.html">Converting inetd Services</ulink>, - <ulink url="http://0pointer.de/blog/projects/socket-activated-containers.html">Socket Activated Internet Services and OS Containers</ulink>. - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.special.xml b/man/systemd.special.xml deleted file mode 100644 index 26974ed73f..0000000000 --- a/man/systemd.special.xml +++ /dev/null @@ -1,935 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.special"> - - <refentryinfo> - <title>systemd.special</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.special</refentrytitle> - <manvolnum>7</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.special</refname> - <refpurpose>Special systemd units</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>basic.target</filename>, - <filename>bluetooth.target</filename>, - <filename>ctrl-alt-del.target</filename>, - <filename>cryptsetup.target</filename>, - <filename>cryptsetup-pre.target</filename>, - <filename>dbus.service</filename>, - <filename>dbus.socket</filename>, - <filename>default.target</filename>, - <filename>display-manager.service</filename>, - <filename>emergency.target</filename>, - <filename>exit.target</filename>, - <filename>final.target</filename>, - <filename>getty.target</filename>, - <filename>graphical.target</filename>, - <filename>halt.target</filename>, - <filename>hibernate.target</filename>, - <filename>hybrid-sleep.target</filename>, - <filename>initrd-fs.target</filename>, - <filename>kbrequest.target</filename>, - <filename>kexec.target</filename>, - <filename>local-fs.target</filename>, - <filename>local-fs-pre.target</filename>, - <filename>multi-user.target</filename>, - <filename>network.target</filename>, - <filename>network-online.target</filename>, - <filename>network-pre.target</filename>, - <filename>nss-lookup.target</filename>, - <filename>nss-user-lookup.target</filename>, - <filename>paths.target</filename>, - <filename>poweroff.target</filename>, - <filename>printer.target</filename>, - <filename>reboot.target</filename>, - <filename>remote-fs.target</filename>, - <filename>remote-fs-pre.target</filename>, - <filename>rescue.target</filename>, - <filename>initrd-root-device.target</filename>, - <filename>initrd-root-fs.target</filename>, - <filename>rpcbind.target</filename>, - <filename>runlevel2.target</filename>, - <filename>runlevel3.target</filename>, - <filename>runlevel4.target</filename>, - <filename>runlevel5.target</filename>, - <filename>shutdown.target</filename>, - <filename>sigpwr.target</filename>, - <filename>sleep.target</filename>, - <filename>slices.target</filename>, - <filename>smartcard.target</filename>, - <filename>sockets.target</filename>, - <filename>sound.target</filename>, - <filename>suspend.target</filename>, - <filename>swap.target</filename>, - <filename>sysinit.target</filename>, - <filename>syslog.socket</filename>, - <filename>system-update.target</filename>, - <filename>time-sync.target</filename>, - <filename>timers.target</filename>, - <filename>umount.target</filename>, - <filename>-.slice</filename>, - <filename>system.slice</filename>, - <filename>user.slice</filename>, - <filename>machine.slice</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>A few units are treated specially by systemd. They have - special internal semantics and cannot be renamed.</para> - </refsect1> - - <refsect1> - <title>Special System Units</title> - - <variablelist> - <varlistentry> - <term><filename>basic.target</filename></term> - <listitem> - <para>A special target unit covering basic boot-up.</para> - - <para>systemd automatically adds dependencies of the types - <varname>Requires=</varname> and <varname>After=</varname> - for this target unit to all services (except for those with - <varname>DefaultDependencies=no</varname>).</para> - - <para>Usually, this should pull-in all local mount points plus - <filename>/var</filename>, <filename>/tmp</filename> and - <filename>/var/tmp</filename>, swap devices, sockets, timers, - path units and other basic initialization necessary for general - purpose daemons. The mentioned mount points are special cased - to allow them to be remote. - </para> - - <para>This target usually does not pull in any non-target units - directly, but rather does so indirectly via other early boot targets. - It is instead meant as a synchronization point for late boot - services. Refer to - <citerefentry><refentrytitle>bootup</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details on the targets involved. - </para> - - </listitem> - </varlistentry> - <varlistentry> - <term><filename>ctrl-alt-del.target</filename></term> - <listitem> - <para>systemd starts this target whenever Control+Alt+Del is - pressed on the console. Usually, this should be aliased - (symlinked) to <filename>reboot.target</filename>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>cryptsetup.target</filename></term> - <listitem> - <para>A target that pulls in setup services for all - encrypted block devices.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>dbus.service</filename></term> - <listitem> - <para>A special unit for the D-Bus bus daemon. As soon as - this service is fully started up systemd will connect to it - and register its service.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>dbus.socket</filename></term> - <listitem> - <para>A special unit for the D-Bus system bus socket. All - units with <varname>Type=dbus</varname> automatically gain a - dependency on this unit.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>default.target</filename></term> - <listitem> - <para>The default unit systemd starts at bootup. Usually, - this should be aliased (symlinked) to - <filename>multi-user.target</filename> or - <filename>graphical.target</filename>.</para> - - <para>The default unit systemd starts at bootup can be - overridden with the <varname>systemd.unit=</varname> kernel - command line option.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>display-manager.service</filename></term> - <listitem> - <para>The display manager service. Usually, this should be - aliased (symlinked) to <filename>gdm.service</filename> or a - similar display manager service.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>emergency.target</filename></term> - <listitem> - <para>A special target unit that starts an emergency shell on the main console. This target does not pull in - any services or mounts. It is the most minimal version of starting the system in order to acquire an - interactive shell; the only processes running are usually just the system manager (PID 1) and the shell - process. This unit is supposed to be used with the kernel command line option - <varname>systemd.unit=</varname>; it is also used when a file system check on a required file system fails, - and boot-up cannot continue. Compare with <filename>rescue.target</filename>, which serves a similar purpose, - but also starts the most basic services and mounts all file systems.</para> - - <para>Use the <literal>systemd.unit=emergency.target</literal> kernel command line option to boot into this - mode. A short alias for this kernel command line option is <literal>emergency</literal>, for compatibility - with SysV.</para> - - <para>In many ways booting into <filename>emergency.target</filename> is similar to the effect of booting - with <literal>init=/bin/sh</literal> on the kernel command line, except that emergency mode provides you with - the full system and service manager, and allows starting individual units in order to continue the boot - process in steps.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>exit.target</filename></term> - <listitem> - <para>A special service unit for shutting down the system or - user service manager. It is equivalent to - <filename>poweroff.target</filename> on non-container - systems, and also works in containers.</para> - - <para>systemd will start this unit when it receives a - request to shut down over D-Bus or a - <constant>SIGTERM</constant> or <constant>SIGINT</constant> - signal when running as user service daemon.</para> - - <para>Normally, this (indirectly) pulls in - <filename>shutdown.target</filename>, which in turn should be - conflicted by all units that want to be scheduled for - shutdown when the service manager starts to exit.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>final.target</filename></term> - <listitem> - <para>A special target unit that is used during the shutdown - logic and may be used to pull in late services after all - normal services are already terminated and all mounts - unmounted. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>getty.target</filename></term> - <listitem> - <para>A special target unit that pulls in statically - configured local TTY <filename>getty</filename> instances. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>graphical.target</filename></term> - <listitem> - <para>A special target unit for setting up a graphical login - screen. This pulls in - <filename>multi-user.target</filename>.</para> - - <para>Units that are needed for graphical logins shall add - <varname>Wants=</varname> dependencies for their unit to - this unit (or <filename>multi-user.target</filename>) during - installation. This is best configured via - <varname>WantedBy=graphical.target</varname> in the unit's - <literal>[Install]</literal> section.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>hibernate.target</filename></term> - <listitem> - <para>A special target unit for hibernating the system. This - pulls in <filename>sleep.target</filename>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>hybrid-sleep.target</filename></term> - <listitem> - <para>A special target unit for hibernating and suspending - the system at the same time. This pulls in - <filename>sleep.target</filename>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>halt.target</filename></term> - <listitem> - <para>A special target unit for shutting down and halting - the system. Note that this target is distinct from - <filename>poweroff.target</filename> in that it generally - really just halts the system rather than powering it - down.</para> - - <para>Applications wanting to halt the system should start - this unit.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>initrd-fs.target</filename></term> - <listitem> - <para><citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>3</manvolnum></citerefentry> - automatically adds dependencies of type - <varname>Before=</varname> to - <filename>sysroot-usr.mount</filename> and all mount points - found in <filename>/etc/fstab</filename> that have - <option>x-initrd.mount</option> and not have - <option>noauto</option> mount options set.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>kbrequest.target</filename></term> - <listitem> - <para>systemd starts this target whenever Alt+ArrowUp is - pressed on the console. This is a good candidate to be - aliased (symlinked) to - <filename>rescue.target</filename>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>kexec.target</filename></term> - <listitem> - <para>A special target unit for shutting down and rebooting - the system via kexec.</para> - - <para>Applications wanting to reboot the system with kexec - should start this unit.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>local-fs.target</filename></term> - <listitem> - <para><citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>3</manvolnum></citerefentry> - automatically adds dependencies of type - <varname>Before=</varname> to all mount units that refer to - local mount points for this target unit. In addition, it - adds dependencies of type <varname>Wants=</varname> to this - target unit for those mounts listed in - <filename>/etc/fstab</filename> that have the - <option>auto</option> mount option set.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>multi-user.target</filename></term> - <listitem> - <para>A special target unit for setting up a multi-user - system (non-graphical). This is pulled in by - <filename>graphical.target</filename>.</para> - - <para>Units that are needed for a multi-user system shall - add <varname>Wants=</varname> dependencies for their unit to - this unit during installation. This is best configured via - <varname>WantedBy=multi-user.target</varname> in the unit's - <literal>[Install]</literal> section.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>network-online.target</filename></term> - <listitem> - <para>Units that strictly require a configured network - connection should pull in - <filename>network-online.target</filename> (via a - <varname>Wants=</varname> type dependency) and order - themselves after it. This target unit is intended to pull in - a service that delays further execution until the network is - sufficiently set up. What precisely this requires is left to - the implementation of the network managing service.</para> - - <para>Note the distinction between this unit and - <filename>network.target</filename>. This unit is an active - unit (i.e. pulled in by the consumer rather than the - provider of this functionality) and pulls in a service which - possibly adds substantial delays to further execution. In - contrast, <filename>network.target</filename> is a passive - unit (i.e. pulled in by the provider of the functionality, - rather than the consumer) that usually does not delay - execution much. Usually, <filename>network.target</filename> - is part of the boot of most systems, while - <filename>network-online.target</filename> is not, except - when at least one unit requires it. Also see <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/NetworkTarget">Running - Services After the Network is up</ulink> for more - information.</para> - - <para>All mount units for remote network file systems - automatically pull in this unit, and order themselves after - it. Note that networking daemons that simply provide - functionality to other hosts generally do not need to pull - this in.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>paths.target</filename></term> - <listitem> - <para>A special target unit that sets up all path units (see - <citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details) that shall be active after boot.</para> - - <para>It is recommended that path units installed by - applications get pulled in via <varname>Wants=</varname> - dependencies from this unit. This is best configured via a - <varname>WantedBy=paths.target</varname> in the path unit's - <literal>[Install]</literal> section.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>poweroff.target</filename></term> - <listitem> - <para>A special target unit for shutting down and powering - off the system.</para> - - <para>Applications wanting to power off the system should - start this unit.</para> - - <para><filename>runlevel0.target</filename> is an alias for - this target unit, for compatibility with SysV.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>reboot.target</filename></term> - <listitem> - <para>A special target unit for shutting down and rebooting - the system.</para> - - <para>Applications wanting to reboot the system should start - this unit.</para> - - <para><filename>runlevel6.target</filename> is an alias for - this target unit, for compatibility with SysV.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>remote-fs.target</filename></term> - <listitem> - <para>Similar to <filename>local-fs.target</filename>, but - for remote mount points.</para> - - <para>systemd automatically adds dependencies of type - <varname>After=</varname> for this target unit to all SysV - init script service units with an LSB header referring to - the <literal>$remote_fs</literal> facility.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>rescue.target</filename></term> - <listitem> - <para>A special target unit that pulls in the base system (including system mounts) and spawns a rescue - shell. Isolate to this target in order to administer the system in single-user mode with all file systems - mounted but with no services running, except for the most basic. Compare with - <filename>emergency.target</filename>, which is much more reduced and does not provide the file systems or - most basic services.</para> - - <para><filename>runlevel1.target</filename> is an alias for this target unit, for compatibility with - SysV.</para> - - <para>Use the <literal>systemd.unit=rescue.target</literal> kernel command line option to boot into this - mode. A short alias for this kernel command line option is <literal>1</literal>, for compatibility with - SysV.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>initrd-root-device.target</filename></term> - <listitem> - <para>A special initrd target unit that is reached when the root filesystem device is available, but before - it has been mounted. - <citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd-gpt-auto-generator</refentrytitle><manvolnum>3</manvolnum></citerefentry> - automatically setup the appropiate dependencies to make this happen. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>initrd-root-fs.target</filename></term> - <listitem> - <para><citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>3</manvolnum></citerefentry> - automatically adds dependencies of type - <varname>Before=</varname> to the - <filename>sysroot.mount</filename> unit, which is generated - from the kernel command line. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>runlevel2.target</filename></term> - <term><filename>runlevel3.target</filename></term> - <term><filename>runlevel4.target</filename></term> - <term><filename>runlevel5.target</filename></term> - <listitem> - <para>These are targets that are called whenever the SysV - compatibility code asks for runlevel 2, 3, 4, 5, - respectively. It is a good idea to make this an alias for - (i.e. symlink to) <filename>multi-user.target</filename> - (for runlevel 2) or <filename>graphical.target</filename> - (the others).</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>shutdown.target</filename></term> - <listitem> - <para>A special target unit that terminates the services on - system shutdown.</para> - - <para>Services that shall be terminated on system shutdown - shall add <varname>Conflicts=</varname> dependencies to this - unit for their service unit, which is implicitly done when - <varname>DefaultDependencies=yes</varname> is set (the - default).</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>sigpwr.target</filename></term> - <listitem> - <para>A special target that is started when systemd receives - the SIGPWR process signal, which is normally sent by the - kernel or UPS daemons when power fails.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>sleep.target</filename></term> - <listitem> - <para>A special target unit that is pulled in by - <filename>suspend.target</filename>, - <filename>hibernate.target</filename> and - <filename>hybrid-sleep.target</filename> and may be used to - hook units into the sleep state logic.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>slices.target</filename></term> - <listitem> - <para>A special target unit that sets up all slice units (see - <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry> for - details) that shall be active after boot. By default the generic <filename>user.slice</filename>, - <filename>system.slice</filename>, <filename>machines.slice</filename> slice units, as well as the root - slice unit <filename>-.slice</filename> are pulled in and ordered before this unit (see below).</para> - - <para>It's a good idea to add <varname>WantedBy=slices.target</varname> lines to the <literal>[Install]</literal> - section of all slices units that may be installed dynamically.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>sockets.target</filename></term> - <listitem> - <para>A special target unit that sets up all socket - units (see - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details) that shall be active after boot.</para> - - <para>Services that can be socket-activated shall add - <varname>Wants=</varname> dependencies to this unit for - their socket unit during installation. This is best - configured via a <varname>WantedBy=sockets.target</varname> - in the socket unit's <literal>[Install]</literal> - section.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>suspend.target</filename></term> - <listitem> - <para>A special target unit for suspending the system. This - pulls in <filename>sleep.target</filename>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>swap.target</filename></term> - <listitem> - <para>Similar to <filename>local-fs.target</filename>, but - for swap partitions and swap files.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>sysinit.target</filename></term> - <listitem> - <para>This target pulls in the services required for system - initialization. System services pulled in by this target should - declare <varname>DefaultDependencies=no</varname> and specify - all their dependencies manually, including access to anything - more than a read only root filesystem. For details on the - dependencies of this target, refer to - <citerefentry><refentrytitle>bootup</refentrytitle><manvolnum>7</manvolnum></citerefentry>. - </para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>syslog.socket</filename></term> - <listitem> - <para>The socket unit syslog implementations should listen - on. All userspace log messages will be made available on - this socket. For more information about syslog integration, - please consult the <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/syslog">Syslog - Interface</ulink> document.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>system-update.target</filename></term> - <listitem> - <para>A special target unit that is used for off-line system - updates. - <citerefentry><refentrytitle>systemd-system-update-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry> - will redirect the boot process to this target if - <filename>/system-update</filename> exists. For more - information see the <ulink - url="http://freedesktop.org/wiki/Software/systemd/SystemUpdates">System - Updates Specification</ulink>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>timers.target</filename></term> - <listitem> - <para>A special target unit that sets up all timer units - (see - <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details) that shall be active after boot.</para> - - <para>It is recommended that timer units installed by - applications get pulled in via <varname>Wants=</varname> - dependencies from this unit. This is best configured via - <varname>WantedBy=timers.target</varname> in the timer - unit's <literal>[Install]</literal> section.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>umount.target</filename></term> - <listitem> - <para>A special target unit that unmounts all mount and - automount points on system shutdown.</para> - - <para>Mounts that shall be unmounted on system shutdown - shall add Conflicts dependencies to this unit for their - mount unit, which is implicitly done when - <varname>DefaultDependencies=yes</varname> is set (the - default).</para> - </listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>Special System Units for Devices</title> - - <para>Some target units are automatically pulled in as devices of - certain kinds show up in the system. These may be used to - automatically activate various services based on the specific type - of the available hardware.</para> - - <variablelist> - <varlistentry> - <term><filename>bluetooth.target</filename></term> - <listitem> - <para>This target is started automatically as soon as a - Bluetooth controller is plugged in or becomes available at - boot.</para> - - <para>This may be used to pull in Bluetooth management - daemons dynamically when Bluetooth hardware is found.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>printer.target</filename></term> - <listitem> - <para>This target is started automatically as soon as a - printer is plugged in or becomes available at boot.</para> - - <para>This may be used to pull in printer management daemons - dynamically when printer hardware is found.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>smartcard.target</filename></term> - <listitem> - <para>This target is started automatically as soon as a - smartcard controller is plugged in or becomes available at - boot.</para> - - <para>This may be used to pull in smartcard management - daemons dynamically when smartcard hardware is found.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>sound.target</filename></term> - <listitem> - <para>This target is started automatically as soon as a - sound card is plugged in or becomes available at - boot.</para> - - <para>This may be used to pull in audio management daemons - dynamically when audio hardware is found.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Special Passive System Units </title> - - <para>A number of special system targets are defined that can be - used to properly order boot-up of optional services. These targets - are generally not part of the initial boot transaction, unless - they are explicitly pulled in by one of the implementing services. - Note specifically that these <emphasis>passive</emphasis> target - units are generally not pulled in by the consumer of a service, - but by the provider of the service. This means: a consuming - service should order itself after these targets (as appropriate), - but not pull it in. A providing service should order itself before - these targets (as appropriate) and pull it in (via a - <varname>Wants=</varname> type dependency).</para> - - <para>Note that these passive units cannot be started manually, - i.e. <literal>systemctl start time-sync.target</literal> will fail - with an error. They can only be pulled in by dependency. This is - enforced since they exist for ordering purposes only and thus are - not useful as only unit within a transaction.</para> - - <variablelist> - <varlistentry> - <term><filename>cryptsetup-pre.target</filename></term> - <listitem> - <para>This passive target unit may be pulled in by services - that want to run before any encrypted block device is set - up. All encrypted block devices are set up after this target - has been reached. Since the shutdown order is implicitly the - reverse start-up order between units, this target is - particularly useful to ensure that a service is shut down - only after all encrypted block devices are fully - stopped.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>local-fs-pre.target</filename></term> - <listitem> - <para>This target unit is - automatically ordered before - all local mount points marked - with <option>auto</option> - (see above). It can be used to - execute certain units before - all local mounts.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>network.target</filename></term> - <listitem> - <para>This unit is supposed to indicate when network - functionality is available, but it is only very weakly - defined what that is supposed to mean, with one exception: - at shutdown, a unit that is ordered after - <filename>network.target</filename> will be stopped before - the network — to whatever level it might be set up then — - is shut down. It is hence useful when writing service files - that require network access on shutdown, which should order - themselves after this target, but not pull it in. Also see - <ulink url="http://www.freedesktop.org/wiki/Software/systemd/NetworkTarget">Running - Services After the Network is up</ulink> for more - information. Also see - <filename>network-online.target</filename> described - above.</para> - - <para>systemd automatically adds dependencies of type - <varname>After=</varname> for this target unit to all SysV - init script service units with an LSB header referring to - the <literal>$network</literal> facility.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>network-pre.target</filename></term> - <listitem> - <para>This passive target unit may be pulled in by services - that want to run before any network is set up, for example - for the purpose of setting up a firewall. All network - management software orders itself after this target, but - does not pull it in.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>nss-lookup.target</filename></term> - <listitem> - <para>A target that should be used as synchronization point - for all host/network name service lookups. Note that this is - independent of user/group name lookups for which - <filename>nss-user-lookup.target</filename> should be used. - All services for which the availability of full host/network - name resolution is essential should be ordered after this - target, but not pull it in. systemd automatically adds - dependencies of type <varname>After=</varname> for this - target unit to all SysV init script service units with an - LSB header referring to the <literal>$named</literal> - facility.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>nss-user-lookup.target</filename></term> - <listitem> - <para>A target that should be used as synchronization point - for all user/group name service lookups. Note that this is - independent of host/network name lookups for which - <filename>nss-lookup.target</filename> should be used. All - services for which the availability of the full user/group - database is essential should be ordered after this target, - but not pull it in. Note that system users are always - resolvable, and hence do not require any special ordering - against this target.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>remote-fs-pre.target</filename></term> - <listitem> - <para>This target unit is automatically ordered before all - remote mount point units (see above). It can be used to run - certain units before the remote mounts are established. Note - that this unit is generally not part of the initial - transaction, unless the unit that wants to be ordered before - all remote mounts pulls it in via a - <varname>Wants=</varname> type dependency. If the unit wants - to be pulled in by the first remote mount showing up, it - should use <filename>network-online.target</filename> (see - above).</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>rpcbind.target</filename></term> - <listitem> - <para>The portmapper/rpcbind pulls in this target and orders - itself before it, to indicate its availability. systemd - automatically adds dependencies of type - <varname>After=</varname> for this target unit to all SysV - init script service units with an LSB header referring to - the <literal>$portmap</literal> facility.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><filename>time-sync.target</filename></term> - <listitem> - <para>Services responsible for synchronizing the system - clock from a remote source (such as NTP client - implementations) should pull in this target and order - themselves before it. All services where correct time is - essential should be ordered after this unit, but not pull it - in. systemd automatically adds dependencies of type - <varname>After=</varname> for this target unit to all SysV - init script service units with an LSB header referring to - the <literal>$time</literal> facility. </para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Special User Units</title> - - <para>When systemd runs as a user instance, the following special - units are available, which have similar definitions as their - system counterparts: - <filename>exit.target</filename>, - <filename>default.target</filename>, - <filename>shutdown.target</filename>, - <filename>sockets.target</filename>, - <filename>timers.target</filename>, - <filename>paths.target</filename>, - <filename>bluetooth.target</filename>, - <filename>printer.target</filename>, - <filename>smartcard.target</filename>, - <filename>sound.target</filename>.</para> - </refsect1> - - <refsect1> - <title>Special Slice Units</title> - - <para>There are four <literal>.slice</literal> units which form - the basis of the hierarchy for assignment of resources for - services, users, and virtual machines or containers.</para> - - <variablelist> - <varlistentry> - <term><filename>-.slice</filename></term> - <listitem> - <para>The root slice is the root of the hierarchy. It - usually does not contain units directly, but may be used to - set defaults for the whole tree.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><filename>system.slice</filename></term> - <listitem> - <para>By default, all system services started by - <command>systemd</command> are found in this slice.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><filename>user.slice</filename></term> - <listitem> - <para>By default, all user processes and services started on - behalf of the user, including the per-user systemd instance - are found in this slice.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><filename>machine.slice</filename></term> - <listitem> - <para>By default, all virtual machines and containers - registered with <command>systemd-machined</command> are - found in this slice. - </para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>bootup</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.swap.xml b/man/systemd.swap.xml deleted file mode 100644 index cf4e1ba839..0000000000 --- a/man/systemd.swap.xml +++ /dev/null @@ -1,250 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.swap"> - <refentryinfo> - <title>systemd.swap</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.swap</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.swap</refname> - <refpurpose>Swap unit configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>swap</replaceable>.swap</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>A unit configuration file whose name ends in - <literal>.swap</literal> encodes information about a swap device - or file for memory paging controlled and supervised by - systemd.</para> - - <para>This man page lists the configuration options specific to - this unit type. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for the common options of all unit configuration files. The common - configuration items are configured in the generic [Unit] and - [Install] sections. The swap specific configuration options are - configured in the [Swap] section.</para> - - <para>Additional options are listed in - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - which define the execution environment the <citerefentry - project='man-pages'><refentrytitle>swapon</refentrytitle><manvolnum>8</manvolnum></citerefentry> - binary is executed in, in - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - which define the way these processes are - terminated, and in - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - which configure resource control settings for these processes of the - unit.</para> - - <para>Swap units must be named after the devices or files they control. Example: the swap device <filename - noindex='true'>/dev/sda5</filename> must be configured in a unit file <filename>dev-sda5.swap</filename>. For - details about the escaping logic used to convert a file system path to a unit name, see - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. Note that swap - units cannot be templated, nor is possible to add multiple names to a swap unit by creating additional symlinks to - it.</para> - </refsect1> - - <refsect1> - <title>Automatic Dependencies</title> - - <para>All swap units automatically get the - <varname>BindsTo=</varname> and <varname>After=</varname> - dependencies on the device units or the mount units of the files - they are activated from.</para> - - <para>Swap units with <varname>DefaultDependencies=</varname> in the <literal>[Unit]</literal> section enabled - implicitly acquire a <varname>Conflicts=</varname> and an <varname>After=</varname> dependency on - <filename>umount.target</filename> so that they are deactivated at shutdown, unless - <varname>DefaultDependencies=no</varname> is specified.</para> - - <para>Additional implicit dependencies may be added as result of - execution and resource control parameters as documented in - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title><filename>fstab</filename></title> - - <para>Swap units may either be configured via unit files, or via - <filename>/etc/fstab</filename> (see - <citerefentry project='man-pages'><refentrytitle>fstab</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details). Swaps listed in <filename>/etc/fstab</filename> will - be converted into native units dynamically at boot and when the - configuration of the system manager is reloaded. See - <citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for details about the conversion.</para> - - <para>If a swap device or file is configured in both - <filename>/etc/fstab</filename> and a unit file, the configuration - in the latter takes precedence.</para> - - <para>When reading <filename>/etc/fstab</filename>, a few special - options are understood by systemd which influence how dependencies - are created for swap units.</para> - - <variablelist class='fstab-options'> - <varlistentry> - <term><option>noauto</option></term> - <term><option>auto</option></term> - - <listitem><para>With <option>noauto</option>, the swap unit - will not be added as a dependency for - <filename>swap.target</filename>. This means that it will not - be activated automatically during boot, unless it is pulled in - by some other unit. The <option>auto</option> option has the - opposite meaning and is the default.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>nofail</option></term> - - <listitem><para>With <option>nofail</option>, the swap unit - will be only wanted, not required by - <filename>swap.target</filename>. This means that the boot - will continue even if this swap device is not activated - successfully.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>Swap files must include a [Swap] section, which carries - information about the swap device it supervises. A number of - options that may be used in this section are shared with other - unit types. These options are documented in - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - The options specific to the [Swap] section of swap units are the - following:</para> - - <variablelist class='unit-directives'> - - <varlistentry> - <term><varname>What=</varname></term> - <listitem><para>Takes an absolute path of a device node or - file to use for paging. See - <citerefentry project='man-pages'><refentrytitle>swapon</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for details. If this refers to a device node, a dependency on - the respective device unit is automatically created. (See - <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information.) If this refers to a file, a dependency - on the respective mount unit is automatically created. (See - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information.) This option is - mandatory.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Priority=</varname></term> - - <listitem><para>Swap priority to use when activating the swap - device or file. This takes an integer. This setting is - optional and ignored when the priority is set by <option>pri=</option> in the - <varname>Options=</varname> key.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Options=</varname></term> - - <listitem><para>May contain an option string for the swap - device. This may be used for controlling discard options among - other functionality, if the swap backing device supports the - discard or trim operation. (See - <citerefentry project='man-pages'><refentrytitle>swapon</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for more information.) </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>TimeoutSec=</varname></term> - <listitem><para>Configures the time to wait for the swapon - command to finish. If a command does not exit within the - configured time, the swap will be considered failed and be - shut down again. All commands still running will be terminated - forcibly via <constant>SIGTERM</constant>, and after another - delay of this time with <constant>SIGKILL</constant>. (See - <option>KillMode=</option> in - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>.) - Takes a unit-less value in seconds, or a time span value such - as "5min 20s". Pass <literal>0</literal> to disable the - timeout logic. Defaults to - <varname>DefaultTimeoutStartSec=</varname> from the manager - configuration file (see - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>). - </para></listitem> - </varlistentry> - </variablelist> - - <para>Check - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more settings.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.resource-control</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>swapon</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-fstab-generator</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.target.xml b/man/systemd.target.xml deleted file mode 100644 index ab910d75dd..0000000000 --- a/man/systemd.target.xml +++ /dev/null @@ -1,103 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.target"> - <refentryinfo> - <title>systemd.target</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.target</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.target</refname> - <refpurpose>Target unit configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>target</replaceable>.target</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>A unit configuration file whose name ends in - <literal>.target</literal> encodes information about a target unit - of systemd, which is used for grouping units and as well-known - synchronization points during start-up.</para> - - <para>This unit type has no specific options. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for the common options of all unit configuration files. The common - configuration items are configured in the generic [Unit] and - [Install] sections. A separate [Target] section does not exist, - since no target-specific options may be configured.</para> - - <para>Target units do not offer any additional functionality on - top of the generic functionality provided by units. They exist - merely to group units via dependencies (useful as boot targets), - and to establish standardized names for synchronization points - used in dependencies between units. Among other things, target - units are a more flexible replacement for SysV runlevels in the - classic SysV init system. (And for compatibility reasons special - target units such as <filename>runlevel3.target</filename> exist - which are used by the SysV runlevel compatibility code in systemd. - See - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details).</para> - </refsect1> - - <refsect1> - <title>Automatic Dependencies</title> - - <para>Unless <varname>DefaultDependencies=</varname> in the <literal>[Unit]</literal> section is set to - <option>no</option>, target units will implicitly complement all configured dependencies of type - <varname>Wants=</varname>, <varname>Requires=</varname> with dependencies of type <varname>After=</varname>, unless - an ordering dependency of any kind between the target and the respective other unit is already in place. Note that - this behaviour is disabled if either unit has <varname>DefaultDependencies=no</varname>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.time.xml b/man/systemd.time.xml deleted file mode 100644 index ffcac82263..0000000000 --- a/man/systemd.time.xml +++ /dev/null @@ -1,313 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.time"> - - <refentryinfo> - <title>systemd.time</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.time</refentrytitle> - <manvolnum>7</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.time</refname> - <refpurpose>Time and date specifications</refpurpose> - </refnamediv> - - <refsect1> - <title>Description</title> - - <para>In systemd, timestamps, time spans, and calendar events are - displayed and may be specified in closely related syntaxes.</para> - </refsect1> - - <refsect1> - <title>Displaying Time Spans</title> - - <para>Time spans refer to time durations. On display, systemd will - present time spans as a space-separated series of time values each - suffixed by a time unit.</para> - - <programlisting>2h 30min</programlisting> - - <para>All specified time values are meant to be added up. The - above hence refers to 150 minutes.</para> - </refsect1> - - <refsect1> - <title>Parsing Time Spans</title> - - <para>When parsing, systemd will accept the same time span syntax. - Separating spaces may be omitted. The following time units are - understood:</para> - - <itemizedlist> - <listitem><para>usec, us</para></listitem> - <listitem><para>msec, ms</para></listitem> - <listitem><para>seconds, second, sec, s</para></listitem> - <listitem><para>minutes, minute, min, m</para></listitem> - <listitem><para>hours, hour, hr, h</para></listitem> - <listitem><para>days, day, d</para></listitem> - <listitem><para>weeks, week, w</para></listitem> - <listitem><para>months, month, M (defined as 30.44 days)</para></listitem> - <listitem><para>years, year, y (define as 365.25 days)</para></listitem> - </itemizedlist> - - <para>If no time unit is specified, generally seconds are assumed, - but some exceptions exist and are marked as such. In a few cases - <literal>ns</literal>, <literal>nsec</literal> is accepted too, - where the granularity of the time span allows for this.</para> - - <para>Examples for valid time span specifications:</para> - - <programlisting>2 h -2hours -48hr -1y 12month -55s500ms -300ms20s 5day</programlisting> - </refsect1> - - <refsect1> - <title>Displaying Timestamps</title> - - <para>Timestamps refer to specific, unique points in time. On - display, systemd will format these in the local timezone as - follows:</para> - - <programlisting>Fri 2012-11-23 23:02:15 CET</programlisting> - - <para>The weekday is printed according to the locale choice of the - user.</para> - </refsect1> - - <refsect1> - <title>Parsing Timestamps</title> - - <para>When parsing, systemd will accept a similar syntax, but - expects no timezone specification, unless it is given as the - literal string "UTC". In this case, the time is considered in UTC, - otherwise in the local timezone. The weekday specification is - optional, but when the weekday is specified, it must either be in - the abbreviated (<literal>Wed</literal>) or non-abbreviated - (<literal>Wednesday</literal>) English language form (case does - not matter), and is not subject to the locale choice of the user. - Either the date, or the time part may be omitted, in which case - the current date or 00:00:00, respectively, is assumed. The seconds - component of the time may also be omitted, in which case ":00" is - assumed. Year numbers may be specified in full or may be - abbreviated (omitting the century).</para> - - <para>A timestamp is considered invalid if a weekday is specified - and the date does not actually match the specified day of the - week.</para> - - <para>When parsing, systemd will also accept a few special - placeholders instead of timestamps: <literal>now</literal> may be - used to refer to the current time (or of the invocation of the - command that is currently executed). <literal>today</literal>, - <literal>yesterday</literal>, and <literal>tomorrow</literal> refer to - 00:00:00 of the current day, the day before, or the next day, - respectively.</para> - - <para>When parsing, systemd will also accept relative time - specifications. A time span (see above) that is prefixed with - <literal>+</literal> is evaluated to the current time plus the - specified time span. Correspondingly, a time span that is prefixed - with <literal>-</literal> is evaluated to the current time minus - the specified time span. Instead of prefixing the time span with - <literal>+</literal> or <literal>-</literal>, it may also be - suffixed with a space and the word <literal>left</literal> or - <literal>ago</literal>.</para> - - <para>Finally, a timespan prefixed with <literal>@</literal> is - evaluated relative to the UNIX time epoch 1st Jan, 1970, - 00:00.</para> - - <para>Examples for valid timestamps and their normalized form - (assuming the current time was 2012-11-23 18:15:22 and the timezone - was UTC+8, for example TZ=Asia/Shanghai):</para> - - <programlisting>Fri 2012-11-23 11:12:13 → Fri 2012-11-23 11:12:13 - 2012-11-23 11:12:13 → Fri 2012-11-23 11:12:13 -2012-11-23 11:12:13 UTC → Fri 2012-11-23 19:12:13 - 2012-11-23 → Fri 2012-11-23 00:00:00 - 12-11-23 → Fri 2012-11-23 00:00:00 - 11:12:13 → Fri 2012-11-23 11:12:13 - 11:12:13.9900009 → Fri 2012-11-23 11:12:13 - format_timestamp_us: Fri 2012-11-23 11:12:13.990000 - 11:12 → Fri 2012-11-23 11:12:00 - now → Fri 2012-11-23 18:15:22 - today → Fri 2012-11-23 00:00:00 - today UTC → Fri 2012-11-23 16:00:00 - yesterday → Fri 2012-11-22 00:00:00 - tomorrow → Fri 2012-11-24 00:00:00 - +3h30min → Fri 2012-11-23 21:45:22 - +3h30min UTC → -EINVAL - -5s → Fri 2012-11-23 18:15:17 - 11min ago → Fri 2012-11-23 18:04:22 - 11min ago UTC → -EINVAL - @1395716396 → Tue 2014-03-25 03:59:56</programlisting> - - <para>Note that timestamps printed by systemd will not be parsed - correctly by systemd, as the timezone specification is not - accepted, and printing timestamps is subject to locale settings - for the weekday, while parsing only accepts English weekday - names.</para> - - <para>In some cases, systemd will display a relative timestamp - (relative to the current time, or the time of invocation of the - command) instead or in addition to an absolute timestamp as - described above. A relative timestamp is formatted as - follows:</para> - - <para>2 months 5 days ago</para> - - <para>Note that any relative timestamp will also parse correctly - where a timestamp is expected. (see above)</para> - </refsect1> - - <refsect1> - <title>Calendar Events</title> - - <para>Calendar events may be used to refer to one or more points - in time in a single expression. They form a superset of the - absolute timestamps explained above:</para> - - <programlisting>Thu,Fri 2012-*-1,5 11:12:13</programlisting> - - <para>The above refers to 11:12:13 of the first or fifth day of - any month of the year 2012, but only if that day is a Thursday or - Friday.</para> - - <para>The weekday specification is optional. If specified, it - should consist of one or more English language weekday names, - either in the abbreviated (Wed) or non-abbreviated (Wednesday) - form (case does not matter), separated by commas. Specifying two - weekdays separated by <literal>-</literal> refers to a range of - continuous weekdays. <literal>,</literal> and <literal>-</literal> - may be combined freely.</para> - - <para>In the date and time specifications, any component may be - specified as <literal>*</literal> in which case any value will - match. Alternatively, each component can be specified as a list of - values separated by commas. Values may also be suffixed with - <literal>/</literal> and a repetition value, which indicates that - the value and all values plus multiples of the repetition value - are matched.</para> - - <para>The seconds component may contain decimal fractions both in - the value and the repetition. All fractions are rounded to 6 - decimal places.</para> - - <para>Either time or date specification may be omitted, in which - case the current day and 00:00:00 is implied, respectively. If the - second component is not specified, <literal>:00</literal> is - assumed.</para> - - <para>A timezone specification is not expected, unless it is given - as the literal string "UTC", similarly to timestamps.</para> - - <para>The special expressions - <literal>minutely</literal>, - <literal>hourly</literal>, <literal>daily</literal>, - <literal>monthly</literal>, <literal>weekly</literal>, - <literal>yearly</literal>, - <literal>quarterly</literal>, - <literal>semiannually</literal> may be used as - calendar events which refer to - <literal>*-*-* *:*:00</literal>, - <literal>*-*-* *:00:00</literal>, - <literal>*-*-* 00:00:00</literal>, - <literal>*-*-01 00:00:00</literal>, - <literal>Mon *-*-* 00:00:00</literal>, - <literal>*-01-01 00:00:00</literal>, - <literal>*-01,04,07,10-01 00:00:00</literal> and - <literal>*-01,07-01 00:00:00</literal>, respectively. - </para> - - <para>Examples for valid timestamps and their - normalized form:</para> - -<programlisting> Sat,Thu,Mon-Wed,Sat-Sun → Mon-Thu,Sat,Sun *-*-* 00:00:00 - Mon,Sun 12-*-* 2,1:23 → Mon,Sun 2012-*-* 01,02:23:00 - Wed *-1 → Wed *-*-01 00:00:00 - Wed-Wed,Wed *-1 → Wed *-*-01 00:00:00 - Wed, 17:48 → Wed *-*-* 17:48:00 -Wed-Sat,Tue 12-10-15 1:2:3 → Tue-Sat 2012-10-15 01:02:03 - *-*-7 0:0:0 → *-*-07 00:00:00 - 10-15 → *-10-15 00:00:00 - monday *-12-* 17:00 → Mon *-12-* 17:00:00 - Mon,Fri *-*-3,1,2 *:30:45 → Mon,Fri *-*-01,02,03 *:30:45 - 12,14,13,12:20,10,30 → *-*-* 12,13,14:10,20,30:00 - mon,fri *-1/2-1,3 *:30:45 → Mon,Fri *-01/2-01,03 *:30:45 - 03-05 08:05:40 → *-03-05 08:05:40 - 08:05:40 → *-*-* 08:05:40 - 05:40 → *-*-* 05:40:00 - Sat,Sun 12-05 08:05:40 → Sat,Sun *-12-05 08:05:40 - Sat,Sun 08:05:40 → Sat,Sun *-*-* 08:05:40 - 2003-03-05 05:40 → 2003-03-05 05:40:00 -05:40:23.4200004/3.1700005 → 05:40:23.420000/3.170001 - 2003-03-05 05:40 UTC → 2003-03-05 05:40:00 UTC - 2003-03-05 → 2003-03-05 00:00:00 - 03-05 → *-03-05 00:00:00 - hourly → *-*-* *:00:00 - daily → *-*-* 00:00:00 - daily UTC → *-*-* 00:00:00 UTC - monthly → *-*-01 00:00:00 - weekly → Mon *-*-* 00:00:00 - yearly → *-01-01 00:00:00 - annually → *-01-01 00:00:00 - *:2/3 → *-*-* *:02/3:00</programlisting> - - <para>Calendar events are used by timer units, see - <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para> - - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.timer.xml b/man/systemd.timer.xml deleted file mode 100644 index 0fa95e97a8..0000000000 --- a/man/systemd.timer.xml +++ /dev/null @@ -1,313 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.timer"> - <refentryinfo> - <title>systemd.timer</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.timer</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.timer</refname> - <refpurpose>Timer unit configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>timer</replaceable>.timer</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>A unit configuration file whose name ends in - <literal>.timer</literal> encodes information about a timer - controlled and supervised by systemd, for timer-based - activation.</para> - - <para>This man page lists the configuration options specific to - this unit type. See - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for the common options of all unit configuration files. The common - configuration items are configured in the generic [Unit] and - [Install] sections. The timer specific configuration options are - configured in the [Timer] section.</para> - - <para>For each timer file, a matching unit file must exist, - describing the unit to activate when the timer elapses. By - default, a service by the same name as the timer (except for the - suffix) is activated. Example: a timer file - <filename>foo.timer</filename> activates a matching service - <filename>foo.service</filename>. The unit to activate may be - controlled by <varname>Unit=</varname> (see below).</para> - - <para>Note that in case the unit to activate is already active at the time the timer elapses it is not restarted, - but simply left running. There is no concept of spawning new service instances in this case. Due to this, services - with <varname>RemainAfterExit=</varname> set (which stay around continously even after the service's main process - exited) are usually not suitable for activation via repetitive timers, as they will only be activated once, and - then stay around forever.</para> - </refsect1> - - <refsect1> - <title>Automatic Dependencies</title> - - <para>Timer units automatically gain a <varname>Before=</varname> - dependency on the service they are supposed to activate.</para> - - <para>Unless <varname>DefaultDependencies=</varname> in the <literal>[Unit]</literal> section is set to - <option>false</option>, all timer units will implicitly have dependencies of type <varname>Requires=</varname> and - <varname>After=</varname> on <filename>sysinit.target</filename>, a dependency of type <varname>Before=</varname> - on <filename>timers.target</filename>, as well as <varname>Conflicts=</varname> and <varname>Before=</varname> on - <filename>shutdown.target</filename> to ensure that they are stopped cleanly prior to system shutdown. Timer units - with at least one <varname>OnCalendar=</varname> directive will have an additional <varname>After=</varname> - dependency on <filename>timer-sync.target</filename> to avoid being started before the system clock has been - correctly set. Only timer units involved with early boot or late system shutdown should disable the - <varname>DefaultDependencies=</varname> option.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>Timer files must include a [Timer] section, which carries - information about the timer it defines. The options specific to - the [Timer] section of timer units are the following:</para> - - <variablelist class='unit-directives'> - <varlistentry> - <term><varname>OnActiveSec=</varname></term> - <term><varname>OnBootSec=</varname></term> - <term><varname>OnStartupSec=</varname></term> - <term><varname>OnUnitActiveSec=</varname></term> - <term><varname>OnUnitInactiveSec=</varname></term> - - <listitem><para>Defines monotonic timers relative to different - starting points: <varname>OnActiveSec=</varname> defines a - timer relative to the moment the timer itself is activated. - <varname>OnBootSec=</varname> defines a timer relative to when - the machine was booted up. <varname>OnStartupSec=</varname> - defines a timer relative to when systemd was first started. - <varname>OnUnitActiveSec=</varname> defines a timer relative - to when the unit the timer is activating was last activated. - <varname>OnUnitInactiveSec=</varname> defines a timer relative - to when the unit the timer is activating was last - deactivated.</para> - - <para>Multiple directives may be combined of the same and of - different types. For example, by combining - <varname>OnBootSec=</varname> and - <varname>OnUnitActiveSec=</varname>, it is possible to define - a timer that elapses in regular intervals and activates a - specific service each time.</para> - - <para>The arguments to the directives are time spans - configured in seconds. Example: "OnBootSec=50" means 50s after - boot-up. The argument may also include time units. Example: - "OnBootSec=5h 30min" means 5 hours and 30 minutes after - boot-up. For details about the syntax of time spans, see - <citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - - <para>If a timer configured with <varname>OnBootSec=</varname> - or <varname>OnStartupSec=</varname> is already in the past - when the timer unit is activated, it will immediately elapse - and the configured unit is started. This is not the case for - timers defined in the other directives.</para> - - <para>These are monotonic timers, independent of wall-clock - time and timezones. If the computer is temporarily suspended, - the monotonic clock stops too.</para> - - <para>If the empty string is assigned to any of these options, - the list of timers is reset, and all prior assignments will - have no effect.</para> - - <para>Note that timers do not necessarily expire at the - precise time configured with these settings, as they are - subject to the <varname>AccuracySec=</varname> setting - below.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><varname>OnCalendar=</varname></term> - - <listitem><para>Defines realtime (i.e. wallclock) timers with - calendar event expressions. See - <citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for more information on the syntax of calendar event - expressions. Otherwise, the semantics are similar to - <varname>OnActiveSec=</varname> and related settings.</para> - - <para>Note that timers do not necessarily expire at the - precise time configured with this setting, as it is subject to - the <varname>AccuracySec=</varname> setting - below.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>AccuracySec=</varname></term> - - <listitem><para>Specify the accuracy the timer shall elapse - with. Defaults to 1min. The timer is scheduled to elapse - within a time window starting with the time specified in - <varname>OnCalendar=</varname>, - <varname>OnActiveSec=</varname>, - <varname>OnBootSec=</varname>, - <varname>OnStartupSec=</varname>, - <varname>OnUnitActiveSec=</varname> or - <varname>OnUnitInactiveSec=</varname> and ending the time - configured with <varname>AccuracySec=</varname> later. Within - this time window, the expiry time will be placed at a - host-specific, randomized, but stable position that is - synchronized between all local timer units. This is done in - order to optimize power consumption to suppress unnecessary - CPU wake-ups. To get best accuracy, set this option to - 1us. Note that the timer is still subject to the timer slack - configured via - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>'s - <varname>TimerSlackNSec=</varname> setting. See - <citerefentry><refentrytitle>prctl</refentrytitle><manvolnum>2</manvolnum></citerefentry> - for details. To optimize power consumption, make sure to set - this value as high as possible and as low as - necessary.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RandomizedDelaySec=</varname></term> - - <listitem><para>Delay the timer by a randomly selected, evenly - distributed amount of time between 0 and the specified time - value. Defaults to 0, indicating that no randomized delay - shall be applied. Each timer unit will determine this delay - randomly each time it is started, and the delay will simply be - added on top of the next determined elapsing time. This is - useful to stretch dispatching of similarly configured timer - events over a certain amount time, to avoid that they all fire - at the same time, possibly resulting in resource - congestion. Note the relation to - <varname>AccuracySec=</varname> above: the latter allows the - service manager to coalesce timer events within a specified - time range in order to minimize wakeups, the former does the - opposite: it stretches timer events over a time range, to make - it unlikely that they fire simultaneously. If - <varname>RandomizedDelaySec=</varname> and - <varname>AccuracySec=</varname> are used in conjunction, first - the randomized delay is added, and then the result is - possibly further shifted to coalesce it with other timer - events happening on the system. As mentioned above - <varname>AccuracySec=</varname> defaults to 1min and - <varname>RandomizedDelaySec=</varname> to 0, thus encouraging - coalescing of timer events. In order to optimally stretch - timer events over a certain range of time, make sure to set - <varname>RandomizedDelaySec=</varname> to a higher value, and - <varname>AccuracySec=1us</varname>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Unit=</varname></term> - - <listitem><para>The unit to activate when this timer elapses. - The argument is a unit name, whose suffix is not - <literal>.timer</literal>. If not specified, this value - defaults to a service that has the same name as the timer - unit, except for the suffix. (See above.) It is recommended - that the unit name that is activated and the unit name of the - timer unit are named identically, except for the - suffix.</para></listitem> - </varlistentry> - - - <varlistentry> - <term><varname>Persistent=</varname></term> - - <listitem><para>Takes a boolean argument. If true, the time - when the service unit was last triggered is stored on disk. - When the timer is activated, the service unit is triggered - immediately if it would have been triggered at least once - during the time when the timer was inactive. This is useful to - catch up on missed runs of the service when the machine was - off. Note that this setting only has an effect on timers - configured with <varname>OnCalendar=</varname>. Defaults - to <varname>false</varname>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>WakeSystem=</varname></term> - - <listitem><para>Takes a boolean argument. If true, an elapsing - timer will cause the system to resume from suspend, should it - be suspended and if the system supports this. Note that this - option will only make sure the system resumes on the - appropriate times, it will not take care of suspending it - again after any work that is to be done is finished. Defaults - to <varname>false</varname>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RemainAfterElapse=</varname></term> - - <listitem><para>Takes a boolean argument. If true, an elapsed - timer will stay loaded, and its state remains queriable. If - false, an elapsed timer unit that cannot elapse anymore is - unloaded. Turning this off is particularly useful for - transient timer units that shall disappear after they first - elapse. Note that this setting has an effect on repeatedly - starting a timer unit that only elapses once: if - <varname>RemainAfterElapse=</varname> is on, it will not be - started again, and is guaranteed to elapse only once. However, - if <varname>RemainAfterElapse=</varname> is off, it might be - started again if it is already elapsed, and thus be triggered - multiple times. Defaults to - <varname>yes</varname>.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>prctl</refentrytitle><manvolnum>2</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.unit.xml b/man/systemd.unit.xml deleted file mode 100644 index 341789cd47..0000000000 --- a/man/systemd.unit.xml +++ /dev/null @@ -1,1484 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ -<!ENTITY % entities SYSTEM "custom-entities.ent" > -%entities; -]> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd.unit"> - - <refentryinfo> - <title>systemd.unit</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd.unit</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd.unit</refname> - <refpurpose>Unit configuration</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename><replaceable>service</replaceable>.service</filename>, - <filename><replaceable>socket</replaceable>.socket</filename>, - <filename><replaceable>device</replaceable>.device</filename>, - <filename><replaceable>mount</replaceable>.mount</filename>, - <filename><replaceable>automount</replaceable>.automount</filename>, - <filename><replaceable>swap</replaceable>.swap</filename>, - <filename><replaceable>target</replaceable>.target</filename>, - <filename><replaceable>path</replaceable>.path</filename>, - <filename><replaceable>timer</replaceable>.timer</filename>, - <filename><replaceable>slice</replaceable>.slice</filename>, - <filename><replaceable>scope</replaceable>.scope</filename></para> - - <para><literallayout><filename>/etc/systemd/system/*</filename> -<filename>/run/systemd/system/*</filename> -<filename>/usr/lib/systemd/system/*</filename> -<filename>…</filename> - </literallayout></para> - - <para><literallayout><filename>~/.config/systemd/user/*</filename> -<filename>/etc/systemd/user/*</filename> -<filename>$XDG_RUNTIME_DIR/systemd/user/*</filename> -<filename>/run/systemd/user/*</filename> -<filename>~/.local/share/systemd/user/*</filename> -<filename>/usr/lib/systemd/user/*</filename> -<filename>…</filename> - </literallayout></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>A unit configuration file encodes information about a - service, a socket, a device, a mount point, an automount point, a - swap file or partition, a start-up target, a watched file system - path, a timer controlled and supervised by - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - a resource management slice or - a group of externally created processes. The syntax is inspired by - <ulink - url="http://standards.freedesktop.org/desktop-entry-spec/latest/">XDG - Desktop Entry Specification</ulink> <filename>.desktop</filename> - files, which are in turn inspired by Microsoft Windows - <filename>.ini</filename> files.</para> - - <para>This man page lists the common configuration options of all - the unit types. These options need to be configured in the [Unit] - or [Install] sections of the unit files.</para> - - <para>In addition to the generic [Unit] and [Install] sections - described here, each unit may have a type-specific section, e.g. - [Service] for a service unit. See the respective man pages for - more information: - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para> - - <para>Various settings are allowed to be specified more than once, - in which case the interpretation depends on the setting. Often, - multiple settings form a list, and setting to an empty value - "resets", which means that previous assignments are ignored. When - this is allowed, it is mentioned in the description of the - setting. Note that using multiple assignments to the same value - makes the unit file incompatible with parsers for the XDG - <filename>.desktop</filename> file format.</para> - - <para>Unit files are loaded from a set of paths determined during - compilation, described in the next section.</para> - - <para>Unit files may contain additional options on top of those - listed here. If systemd encounters an unknown option, it will - write a warning log message but continue loading the unit. If an - option or section name is prefixed with <option>X-</option>, it is - ignored completely by systemd. Options within an ignored section - do not need the prefix. Applications may use this to include - additional information in the unit files.</para> - - <para>Boolean arguments used in unit files can be written in - various formats. For positive settings the strings - <option>1</option>, <option>yes</option>, <option>true</option> - and <option>on</option> are equivalent. For negative settings, the - strings <option>0</option>, <option>no</option>, - <option>false</option> and <option>off</option> are - equivalent.</para> - - <para>Time span values encoded in unit files can be written in - various formats. A stand-alone number specifies a time in seconds. - If suffixed with a time unit, the unit is honored. A concatenation - of multiple values with units is supported, in which case the - values are added up. Example: "50" refers to 50 seconds; "2min - 200ms" refers to 2 minutes plus 200 milliseconds, i.e. 120200ms. - The following time units are understood: s, min, h, d, w, ms, us. - For details see - <citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - - <para>Empty lines and lines starting with # or ; are - ignored. This may be used for commenting. Lines ending - in a backslash are concatenated with the following - line while reading and the backslash is replaced by a - space character. This may be used to wrap long lines.</para> - - <para>Along with a unit file <filename>foo.service</filename>, the - directory <filename>foo.service.wants/</filename> may exist. All - unit files symlinked from such a directory are implicitly added as - dependencies of type <varname>Wants=</varname> to the unit. This - is useful to hook units into the start-up of other units, without - having to modify their unit files. For details about the semantics - of <varname>Wants=</varname>, see below. The preferred way to - create symlinks in the <filename>.wants/</filename> directory of a - unit file is with the <command>enable</command> command of the - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - tool which reads information from the [Install] section of unit - files (see below). A similar functionality exists for - <varname>Requires=</varname> type dependencies as well, the - directory suffix is <filename>.requires/</filename> in this - case.</para> - - <para>Along with a unit file <filename>foo.service</filename>, a "drop-in" directory - <filename>foo.service.d/</filename> may exist. All files with the suffix <literal>.conf</literal> from this - directory will be parsed after the file itself is parsed. This is useful to alter or add configuration settings for - a unit, without having to modify unit files. Each drop-in file must have appropriate section headers. Note that for - instantiated units, this logic will first look for the instance <literal>.d/</literal> subdirectory and read its - <literal>.conf</literal> files, followed by the template <literal>.d/</literal> subdirectory and the - <literal>.conf</literal> files there. Also note that settings from the <literal>[Install]</literal> section are not - honoured in drop-in unit files, and have no effect.</para> - - <para>In addition to <filename>/etc/systemd/system</filename>, - the drop-in <literal>.conf</literal> files for system services - can be placed in <filename>/usr/lib/systemd/system</filename> or - <filename>/run/systemd/system</filename> directories. Drop-in - files in <filename>/etc</filename> take precedence over those in - <filename>/run</filename> which in turn take precedence over - those in <filename>/usr/lib</filename>. Drop-in files under any of - these directories take precedence over unit files wherever located. - (Of course, since <filename>/run</filename> is temporary and - <filename>/usr/lib</filename> is for vendors, it is unlikely - drop-ins should be used in either of those places.)</para> - <!-- Note that we do not document .include here, as we - consider it mostly obsolete, and want people to - use .d/ drop-ins instead. --> - - <para>Some unit names reflect paths existing in the file system - namespace. Example: a device unit - <filename>dev-sda.device</filename> refers to a device with the - device node <filename noindex='true'>/dev/sda</filename> in the - file system namespace. If this applies, a special way to escape - the path name is used, so that the result is usable as part of a - filename. Basically, given a path, "/" is replaced by "-", and all - other characters which are not ASCII alphanumerics are replaced by - C-style "\x2d" escapes (except that "_" is never replaced and "." - is only replaced when it would be the first character in the - escaped path). The root directory "/" is encoded as single dash, - while otherwise the initial and ending "/" are removed from all - paths during transformation. This escaping is reversible. Properly - escaped paths can be generated using the - <citerefentry><refentrytitle>systemd-escape</refentrytitle><manvolnum>1</manvolnum></citerefentry> - command.</para> - - <para>Optionally, units may be instantiated from a - template file at runtime. This allows creation of - multiple units from a single configuration file. If - systemd looks for a unit configuration file, it will - first search for the literal unit name in the - file system. If that yields no success and the unit - name contains an <literal>@</literal> character, systemd will look for a - unit template that shares the same name but with the - instance string (i.e. the part between the <literal>@</literal> character - and the suffix) removed. Example: if a service - <filename>getty@tty3.service</filename> is requested - and no file by that name is found, systemd will look - for <filename>getty@.service</filename> and - instantiate a service from that configuration file if - it is found.</para> - - <para>To refer to the instance string from within the - configuration file you may use the special <literal>%i</literal> - specifier in many of the configuration options. See below for - details.</para> - - <para>If a unit file is empty (i.e. has the file size 0) or is - symlinked to <filename>/dev/null</filename>, its configuration - will not be loaded and it appears with a load state of - <literal>masked</literal>, and cannot be activated. Use this as an - effective way to fully disable a unit, making it impossible to - start it even manually.</para> - - <para>The unit file format is covered by the - <ulink - url="http://www.freedesktop.org/wiki/Software/systemd/InterfaceStabilityPromise">Interface - Stability Promise</ulink>.</para> - - </refsect1> - - <refsect1> - <title>Automatic Dependencies</title> - - <para>Note that while systemd offers a flexible dependency system - between units it is recommended to use this functionality only - sparingly and instead rely on techniques such as bus-based or - socket-based activation which make dependencies implicit, - resulting in a both simpler and more flexible system.</para> - - <para>A number of unit dependencies are automatically established, - depending on unit configuration. On top of that, for units with - <varname>DefaultDependencies=yes</varname> (the default) a couple - of additional dependencies are added. The precise effect of - <varname>DefaultDependencies=yes</varname> depends on the unit - type (see below).</para> - - <para>If <varname>DefaultDependencies=yes</varname> is set, units - that are referenced by other units of type - <filename>.target</filename> via a <varname>Wants=</varname> or - <varname>Requires=</varname> dependency might automatically gain - an <varname>Before=</varname> dependency too. See - <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details.</para> - </refsect1> - - <refsect1> - <title>Unit File Load Path</title> - - <para>Unit files are loaded from a set of paths determined during - compilation, described in the two tables below. Unit files found - in directories listed earlier override files with the same name in - directories lower in the list.</para> - - <para>When the variable <varname>$SYSTEMD_UNIT_PATH</varname> is set, - the contents of this variable overrides the unit load path. If - <varname>$SYSTEMD_UNIT_PATH</varname> ends with an empty component - (<literal>:</literal>), the usual unit load path will be appended - to the contents of the variable.</para> - - <table> - <title> - Load path when running in system mode (<option>--system</option>). - </title> - - <tgroup cols='2'> - <colspec colname='path' /> - <colspec colname='expl' /> - <thead> - <row> - <entry>Path</entry> - <entry>Description</entry> - </row> - </thead> - <tbody> - <row> - <entry><filename>/etc/systemd/system</filename></entry> - <entry>Local configuration</entry> - </row> - <row> - <entry><filename>/run/systemd/system</filename></entry> - <entry>Runtime units</entry> - </row> - <row> - <entry><filename>/usr/lib/systemd/system</filename></entry> - <entry>Units of installed packages</entry> - </row> - </tbody> - </tgroup> - </table> - - <table> - <title> - Load path when running in user mode (<option>--user</option>). - </title> - - <tgroup cols='2'> - <colspec colname='path' /> - <colspec colname='expl' /> - <thead> - <row> - <entry>Path</entry> - <entry>Description</entry> - </row> - </thead> - <tbody> - <row> - <entry><filename>$XDG_CONFIG_HOME/systemd/user</filename></entry> - <entry>User configuration (only used when $XDG_CONFIG_HOME is set)</entry> - </row> - <row> - <entry><filename>$HOME/.config/systemd/user</filename></entry> - <entry>User configuration (only used when $XDG_CONFIG_HOME is not set)</entry> - </row> - <row> - <entry><filename>/etc/systemd/user</filename></entry> - <entry>Local configuration</entry> - </row> - <row> - <entry><filename>$XDG_RUNTIME_DIR/systemd/user</filename></entry> - <entry>Runtime units (only used when $XDG_RUNTIME_DIR is set)</entry> - </row> - <row> - <entry><filename>/run/systemd/user</filename></entry> - <entry>Runtime units</entry> - </row> - <row> - <entry><filename>$XDG_DATA_HOME/systemd/user</filename></entry> - <entry>Units of packages that have been installed in the home directory (only used when $XDG_DATA_HOME is set)</entry> - </row> - <row> - <entry><filename>$HOME/.local/share/systemd/user</filename></entry> - <entry>Units of packages that have been installed in the home directory (only used when $XDG_DATA_HOME is not set)</entry> - </row> - <row> - <entry><filename>/usr/lib/systemd/user</filename></entry> - <entry>Units of packages that have been installed system-wide</entry> - </row> - </tbody> - </tgroup> - </table> - - <para>Additional units might be loaded into systemd ("linked") - from directories not on the unit load path. See the - <command>link</command> command for - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>. - Also, some units are dynamically created via a - <citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>. - </para> - </refsect1> - - <refsect1> - <title>[Unit] Section Options</title> - - <para>The unit file may include a [Unit] section, which carries - generic information about the unit that is not dependent on the - type of unit:</para> - - <variablelist class='unit-directives'> - - <varlistentry> - <term><varname>Description=</varname></term> - <listitem><para>A free-form string describing the unit. This - is intended for use in UIs to show descriptive information - along with the unit name. The description should contain a - name that means something to the end user. <literal>Apache2 - Web Server</literal> is a good example. Bad examples are - <literal>high-performance light-weight HTTP server</literal> - (too generic) or <literal>Apache2</literal> (too specific and - meaningless for people who do not know - Apache).</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Documentation=</varname></term> - <listitem><para>A space-separated list of URIs referencing - documentation for this unit or its configuration. Accepted are - only URIs of the types <literal>http://</literal>, - <literal>https://</literal>, <literal>file:</literal>, - <literal>info:</literal>, <literal>man:</literal>. For more - information about the syntax of these URIs, see <citerefentry - project='man-pages'><refentrytitle>uri</refentrytitle><manvolnum>7</manvolnum></citerefentry>. - The URIs should be listed in order of relevance, starting with - the most relevant. It is a good idea to first reference - documentation that explains what the unit's purpose is, - followed by how it is configured, followed by any other - related documentation. This option may be specified more than - once, in which case the specified list of URIs is merged. If - the empty string is assigned to this option, the list is reset - and all prior assignments will have no - effect.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Requires=</varname></term> - - <listitem><para>Configures requirement dependencies on other - units. If this unit gets activated, the units listed here will - be activated as well. If one of the other units gets - deactivated or its activation fails, this unit will be - deactivated. This option may be specified more than once or - multiple space-separated units may be specified in one option - in which case requirement dependencies for all listed names - will be created. Note that requirement dependencies do not - influence the order in which services are started or stopped. - This has to be configured independently with the - <varname>After=</varname> or <varname>Before=</varname> - options. If a unit <filename>foo.service</filename> requires a - unit <filename>bar.service</filename> as configured with - <varname>Requires=</varname> and no ordering is configured - with <varname>After=</varname> or <varname>Before=</varname>, - then both units will be started simultaneously and without any - delay between them if <filename>foo.service</filename> is - activated. Often, it is a better choice to use - <varname>Wants=</varname> instead of - <varname>Requires=</varname> in order to achieve a system that - is more robust when dealing with failing services.</para> - - <para>Note that dependencies of this type may also be - configured outside of the unit configuration file by adding a - symlink to a <filename>.requires/</filename> directory - accompanying the unit file. For details, see - above.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Requisite=</varname></term> - - <listitem><para>Similar to <varname>Requires=</varname>. - However, if the units listed here are not started already, - they will not be started and the transaction will fail - immediately. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Wants=</varname></term> - - <listitem><para>A weaker version of - <varname>Requires=</varname>. Units listed in this option will - be started if the configuring unit is. However, if the listed - units fail to start or cannot be added to the transaction, - this has no impact on the validity of the transaction as a - whole. This is the recommended way to hook start-up of one - unit to the start-up of another unit.</para> - - <para>Note that dependencies of this type may also be - configured outside of the unit configuration file by adding - symlinks to a <filename>.wants/</filename> directory - accompanying the unit file. For details, see - above.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>BindsTo=</varname></term> - - <listitem><para>Configures requirement dependencies, very - similar in style to <varname>Requires=</varname>, however in - addition to this behavior, it also declares that this unit is - stopped when any of the units listed suddenly disappears. - Units can suddenly, unexpectedly disappear if a service - terminates on its own choice, a device is unplugged or a mount - point unmounted without involvement of - systemd.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>PartOf=</varname></term> - - <listitem><para>Configures dependencies similar to - <varname>Requires=</varname>, but limited to stopping and - restarting of units. When systemd stops or restarts the units - listed here, the action is propagated to this unit. Note that - this is a one-way dependency — changes to this unit do not - affect the listed units. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Conflicts=</varname></term> - - <listitem><para>A space-separated list of unit names. - Configures negative requirement dependencies. If a unit has a - <varname>Conflicts=</varname> setting on another unit, - starting the former will stop the latter and vice versa. Note - that this setting is independent of and orthogonal to the - <varname>After=</varname> and <varname>Before=</varname> - ordering dependencies.</para> - - <para>If a unit A that conflicts with a unit B is scheduled to - be started at the same time as B, the transaction will either - fail (in case both are required part of the transaction) or be - modified to be fixed (in case one or both jobs are not a - required part of the transaction). In the latter case, the job - that is not the required will be removed, or in case both are - not required, the unit that conflicts will be started and the - unit that is conflicted is stopped.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Before=</varname></term> - <term><varname>After=</varname></term> - - <listitem><para>A space-separated list of unit names. - Configures ordering dependencies between units. If a unit - <filename>foo.service</filename> contains a setting - <option>Before=bar.service</option> and both units are being - started, <filename>bar.service</filename>'s start-up is - delayed until <filename>foo.service</filename> is started up. - Note that this setting is independent of and orthogonal to the - requirement dependencies as configured by - <varname>Requires=</varname>. It is a common pattern to - include a unit name in both the <varname>After=</varname> and - <varname>Requires=</varname> option, in which case the unit - listed will be started before the unit that is configured with - these options. This option may be specified more than once, in - which case ordering dependencies for all listed names are - created. <varname>After=</varname> is the inverse of - <varname>Before=</varname>, i.e. while - <varname>After=</varname> ensures that the configured unit is - started after the listed unit finished starting up, - <varname>Before=</varname> ensures the opposite, i.e. that the - configured unit is fully started up before the listed unit is - started. Note that when two units with an ordering dependency - between them are shut down, the inverse of the start-up order - is applied. i.e. if a unit is configured with - <varname>After=</varname> on another unit, the former is - stopped before the latter if both are shut down. Given two units - with any ordering dependency between them, if one unit is shut - down and the other is started up, the shutdown is ordered - before the start-up. It doesn't matter if the ordering - dependency is <varname>After=</varname> or - <varname>Before=</varname>. It also doesn't matter which of the - two is shut down, as long as one is shut down and the other is - started up. The shutdown is ordered before the start-up in all - cases. If two units have no ordering dependencies between them, - they are shut down or started up simultaneously, and no ordering - takes place. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>OnFailure=</varname></term> - - <listitem><para>A space-separated list of one or more units - that are activated when this unit enters the - <literal>failed</literal> state.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>PropagatesReloadTo=</varname></term> - <term><varname>ReloadPropagatedFrom=</varname></term> - - <listitem><para>A space-separated list of one or more units - where reload requests on this unit will be propagated to, or - reload requests on the other unit will be propagated to this - unit, respectively. Issuing a reload request on a unit will - automatically also enqueue a reload request on all units that - the reload request shall be propagated to via these two - settings.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>JoinsNamespaceOf=</varname></term> - - <listitem><para>For units that start processes (such as - service units), lists one or more other units whose network - and/or temporary file namespace to join. This only applies to - unit types which support the - <varname>PrivateNetwork=</varname> and - <varname>PrivateTmp=</varname> directives (see - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details). If a unit that has this setting set is started, - its processes will see the same <filename>/tmp</filename>, - <filename>/var/tmp</filename> and network namespace as one - listed unit that is started. If multiple listed units are - already started, it is not defined which namespace is joined. - Note that this setting only has an effect if - <varname>PrivateNetwork=</varname> and/or - <varname>PrivateTmp=</varname> is enabled for both the unit - that joins the namespace and the unit whose namespace is - joined.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RequiresMountsFor=</varname></term> - - <listitem><para>Takes a space-separated list of absolute - paths. Automatically adds dependencies of type - <varname>Requires=</varname> and <varname>After=</varname> for - all mount units required to access the specified path.</para> - - <para>Mount points marked with <option>noauto</option> are not - mounted automatically and will be ignored for the purposes of - this option. If such a mount should be a requirement for this - unit, direct dependencies on the mount units may be added - (<varname>Requires=</varname> and <varname>After=</varname> or - some other combination). </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>OnFailureJobMode=</varname></term> - - <listitem><para>Takes a value of - <literal>fail</literal>, - <literal>replace</literal>, - <literal>replace-irreversibly</literal>, - <literal>isolate</literal>, - <literal>flush</literal>, - <literal>ignore-dependencies</literal> or - <literal>ignore-requirements</literal>. Defaults to - <literal>replace</literal>. Specifies how the units listed in - <varname>OnFailure=</varname> will be enqueued. See - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s - <option>--job-mode=</option> option for details on the - possible values. If this is set to <literal>isolate</literal>, - only a single unit may be listed in - <varname>OnFailure=</varname>..</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>IgnoreOnIsolate=</varname></term> - - <listitem><para>Takes a boolean argument. If - <option>true</option>, this unit will not be stopped when - isolating another unit. Defaults to - <option>false</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>StopWhenUnneeded=</varname></term> - - <listitem><para>Takes a boolean argument. If - <option>true</option>, this unit will be stopped when it is no - longer used. Note that, in order to minimize the work to be - executed, systemd will not stop units by default unless they - are conflicting with other units, or the user explicitly - requested their shut down. If this option is set, a unit will - be automatically cleaned up if no other active unit requires - it. Defaults to <option>false</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RefuseManualStart=</varname></term> - <term><varname>RefuseManualStop=</varname></term> - - <listitem><para>Takes a boolean argument. If - <option>true</option>, this unit can only be activated or - deactivated indirectly. In this case, explicit start-up or - termination requested by the user is denied, however if it is - started or stopped as a dependency of another unit, start-up - or termination will succeed. This is mostly a safety feature - to ensure that the user does not accidentally activate units - that are not intended to be activated explicitly, and not - accidentally deactivate units that are not intended to be - deactivated. These options default to - <option>false</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>AllowIsolate=</varname></term> - - <listitem><para>Takes a boolean argument. If - <option>true</option>, this unit may be used with the - <command>systemctl isolate</command> command. Otherwise, this - will be refused. It probably is a good idea to leave this - disabled except for target units that shall be used similar to - runlevels in SysV init systems, just as a precaution to avoid - unusable system states. This option defaults to - <option>false</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DefaultDependencies=</varname></term> - - <listitem><para>Takes a boolean argument. If - <option>true</option>, (the default), a few default - dependencies will implicitly be created for the unit. The - actual dependencies created depend on the unit type. For - example, for service units, these dependencies ensure that the - service is started only after basic system initialization is - completed and is properly terminated on system shutdown. See - the respective man pages for details. Generally, only services - involved with early boot or late shutdown should set this - option to <option>false</option>. It is highly recommended to - leave this option enabled for the majority of common units. If - set to <option>false</option>, this option does not disable - all implicit dependencies, just non-essential - ones.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>JobTimeoutSec=</varname></term> - <term><varname>JobTimeoutAction=</varname></term> - <term><varname>JobTimeoutRebootArgument=</varname></term> - - <listitem><para>When a job for this unit is queued, a time-out may be configured. If this time limit is - reached, the job will be cancelled, the unit however will not change state or even enter the - <literal>failed</literal> mode. This value defaults to <literal>infinity</literal> (job timeouts disabled), - except for device units. NB: this timeout is independent from any unit-specific timeout (for example, the - timeout set with <varname>TimeoutStartSec=</varname> in service units) as the job timeout has no effect on the - unit itself, only on the job that might be pending for it. Or in other words: unit-specific timeouts are useful - to abort unit state changes, and revert them. The job timeout set with this option however is useful to abort - only the job waiting for the unit state to change.</para> - - <para><varname>JobTimeoutAction=</varname> - optionally configures an additional - action to take when the time-out is - hit. It takes the same values as the - per-service - <varname>StartLimitAction=</varname> - setting, see - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details. Defaults to - <option>none</option>. <varname>JobTimeoutRebootArgument=</varname> - configures an optional reboot string - to pass to the - <citerefentry><refentrytitle>reboot</refentrytitle><manvolnum>2</manvolnum></citerefentry> - system call.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>StartLimitIntervalSec=</varname></term> - <term><varname>StartLimitBurst=</varname></term> - - <listitem><para>Configure unit start rate limiting. By default, units which are started more than 5 times - within 10 seconds are not permitted to start any more times until the 10 second interval ends. With these two - options, this rate limiting may be modified. Use <varname>StartLimitIntervalSec=</varname> to configure the - checking interval (defaults to <varname>DefaultStartLimitIntervalSec=</varname> in manager configuration file, - set to 0 to disable any kind of rate limiting). Use <varname>StartLimitBurst=</varname> to configure how many - starts per interval are allowed (defaults to <varname>DefaultStartLimitBurst=</varname> in manager - configuration file). These configuration options are particularly useful in conjunction with the service - setting <varname>Restart=</varname> (see - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>); however, - they apply to all kinds of starts (including manual), not just those triggered by the - <varname>Restart=</varname> logic. Note that units which are configured for <varname>Restart=</varname> and - which reach the start limit are not attempted to be restarted anymore; however, they may still be restarted - manually at a later point, from which point on, the restart logic is again activated. Note that - <command>systemctl reset-failed</command> will cause the restart rate counter for a service to be flushed, - which is useful if the administrator wants to manually start a unit and the start limit interferes with - that. Note that this rate-limiting is enforced after any unit condition checks are executed, and hence unit - activations with failing conditions are not counted by this rate limiting. Slice, target, device and scope - units do not enforce this setting, as they are unit types whose activation may either never fail, or may - succeed only a single time.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>StartLimitAction=</varname></term> - - <listitem><para>Configure the action to take if the rate limit configured with - <varname>StartLimitIntervalSec=</varname> and <varname>StartLimitBurst=</varname> is hit. Takes one of - <option>none</option>, <option>reboot</option>, <option>reboot-force</option>, - <option>reboot-immediate</option>, <option>poweroff</option>, <option>poweroff-force</option> or - <option>poweroff-immediate</option>. If <option>none</option> is set, hitting the rate limit will trigger no - action besides that the start will not be permitted. <option>reboot</option> causes a reboot following the - normal shutdown procedure (i.e. equivalent to <command>systemctl reboot</command>). - <option>reboot-force</option> causes a forced reboot which will terminate all processes forcibly but should - cause no dirty file systems on reboot (i.e. equivalent to <command>systemctl reboot -f</command>) and - <option>reboot-immediate</option> causes immediate execution of the - <citerefentry><refentrytitle>reboot</refentrytitle><manvolnum>2</manvolnum></citerefentry> system call, which - might result in data loss. Similarly, <option>poweroff</option>, <option>poweroff-force</option>, - <option>poweroff-immediate</option> have the effect of powering down the system with similar - semantics. Defaults to <option>none</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>RebootArgument=</varname></term> - <listitem><para>Configure the optional argument for the - <citerefentry><refentrytitle>reboot</refentrytitle><manvolnum>2</manvolnum></citerefentry> system call if - <varname>StartLimitAction=</varname> or a service's <varname>FailureAction=</varname> is a reboot action. This - works just like the optional argument to <command>systemctl reboot</command> command.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>ConditionArchitecture=</varname></term> - <term><varname>ConditionVirtualization=</varname></term> - <term><varname>ConditionHost=</varname></term> - <term><varname>ConditionKernelCommandLine=</varname></term> - <term><varname>ConditionSecurity=</varname></term> - <term><varname>ConditionCapability=</varname></term> - <term><varname>ConditionACPower=</varname></term> - <term><varname>ConditionNeedsUpdate=</varname></term> - <term><varname>ConditionFirstBoot=</varname></term> - <term><varname>ConditionPathExists=</varname></term> - <term><varname>ConditionPathExistsGlob=</varname></term> - <term><varname>ConditionPathIsDirectory=</varname></term> - <term><varname>ConditionPathIsSymbolicLink=</varname></term> - <term><varname>ConditionPathIsMountPoint=</varname></term> - <term><varname>ConditionPathIsReadWrite=</varname></term> - <term><varname>ConditionDirectoryNotEmpty=</varname></term> - <term><varname>ConditionFileNotEmpty=</varname></term> - <term><varname>ConditionFileIsExecutable=</varname></term> - - <!-- We do not document ConditionNull= - here, as it is not particularly - useful and probably just - confusing. --> - - <listitem><para>Before starting a unit, verify that the specified condition is true. If it is not true, the - starting of the unit will be (mostly silently) skipped, however all ordering dependencies of it are still - respected. A failing condition will not result in the unit being moved into a failure state. The condition is - checked at the time the queued start job is to be executed. Use condition expressions in order to silently skip - units that do not apply to the local running system, for example because the kernel or runtime environment - doesn't require its functionality. Use the various <varname>AssertArchitecture=</varname>, - <varname>AssertVirtualization=</varname>, … options for a similar mechanism that puts the unit in a failure - state and logs about the failed check (see below).</para> - - <para><varname>ConditionArchitecture=</varname> may be used to - check whether the system is running on a specific - architecture. Takes one of - <varname>x86</varname>, - <varname>x86-64</varname>, - <varname>ppc</varname>, - <varname>ppc-le</varname>, - <varname>ppc64</varname>, - <varname>ppc64-le</varname>, - <varname>ia64</varname>, - <varname>parisc</varname>, - <varname>parisc64</varname>, - <varname>s390</varname>, - <varname>s390x</varname>, - <varname>sparc</varname>, - <varname>sparc64</varname>, - <varname>mips</varname>, - <varname>mips-le</varname>, - <varname>mips64</varname>, - <varname>mips64-le</varname>, - <varname>alpha</varname>, - <varname>arm</varname>, - <varname>arm-be</varname>, - <varname>arm64</varname>, - <varname>arm64-be</varname>, - <varname>sh</varname>, - <varname>sh64</varname>, - <varname>m86k</varname>, - <varname>tilegx</varname>, - <varname>cris</varname> to test - against a specific architecture. The architecture is - determined from the information returned by - <citerefentry project='man-pages'><refentrytitle>uname</refentrytitle><manvolnum>2</manvolnum></citerefentry> - and is thus subject to - <citerefentry><refentrytitle>personality</refentrytitle><manvolnum>2</manvolnum></citerefentry>. - Note that a <varname>Personality=</varname> setting in the - same unit file has no effect on this condition. A special - architecture name <varname>native</varname> is mapped to the - architecture the system manager itself is compiled for. The - test may be negated by prepending an exclamation mark.</para> - - <para><varname>ConditionVirtualization=</varname> may be used - to check whether the system is executed in a virtualized - environment and optionally test whether it is a specific - implementation. Takes either boolean value to check if being - executed in any virtualized environment, or one of - <varname>vm</varname> and - <varname>container</varname> to test against a generic type of - virtualization solution, or one of - <varname>qemu</varname>, - <varname>kvm</varname>, - <varname>zvm</varname>, - <varname>vmware</varname>, - <varname>microsoft</varname>, - <varname>oracle</varname>, - <varname>xen</varname>, - <varname>bochs</varname>, - <varname>uml</varname>, - <varname>openvz</varname>, - <varname>lxc</varname>, - <varname>lxc-libvirt</varname>, - <varname>systemd-nspawn</varname>, - <varname>docker</varname>, - <varname>rkt</varname> to test - against a specific implementation. See - <citerefentry><refentrytitle>systemd-detect-virt</refentrytitle><manvolnum>1</manvolnum></citerefentry> - for a full list of known virtualization technologies and their - identifiers. If multiple virtualization technologies are - nested, only the innermost is considered. The test may be - negated by prepending an exclamation mark.</para> - - <para><varname>ConditionHost=</varname> may be used to match - against the hostname or machine ID of the host. This either - takes a hostname string (optionally with shell style globs) - which is tested against the locally set hostname as returned - by - <citerefentry><refentrytitle>gethostname</refentrytitle><manvolnum>2</manvolnum></citerefentry>, - or a machine ID formatted as string (see - <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>). - The test may be negated by prepending an exclamation - mark.</para> - - <para><varname>ConditionKernelCommandLine=</varname> may be - used to check whether a specific kernel command line option is - set (or if prefixed with the exclamation mark unset). The - argument must either be a single word, or an assignment (i.e. - two words, separated <literal>=</literal>). In the former case - the kernel command line is searched for the word appearing as - is, or as left hand side of an assignment. In the latter case, - the exact assignment is looked for with right and left hand - side matching.</para> - - <para><varname>ConditionSecurity=</varname> may be used to - check whether the given security module is enabled on the - system. Currently, the recognized values are - <varname>selinux</varname>, - <varname>apparmor</varname>, - <varname>ima</varname>, - <varname>smack</varname> and - <varname>audit</varname>. The test may be negated by - prepending an exclamation mark.</para> - - <para><varname>ConditionCapability=</varname> may be used to - check whether the given capability exists in the capability - bounding set of the service manager (i.e. this does not check - whether capability is actually available in the permitted or - effective sets, see - <citerefentry project='man-pages'><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details). Pass a capability name such as - <literal>CAP_MKNOD</literal>, possibly prefixed with an - exclamation mark to negate the check.</para> - - <para><varname>ConditionACPower=</varname> may be used to - check whether the system has AC power, or is exclusively - battery powered at the time of activation of the unit. This - takes a boolean argument. If set to <varname>true</varname>, - the condition will hold only if at least one AC connector of - the system is connected to a power source, or if no AC - connectors are known. Conversely, if set to - <varname>false</varname>, the condition will hold only if - there is at least one AC connector known and all AC connectors - are disconnected from a power source.</para> - - <para><varname>ConditionNeedsUpdate=</varname> takes one of - <filename>/var</filename> or <filename>/etc</filename> as - argument, possibly prefixed with a <literal>!</literal> (for - inverting the condition). This condition may be used to - conditionalize units on whether the specified directory - requires an update because <filename>/usr</filename>'s - modification time is newer than the stamp file - <filename>.updated</filename> in the specified directory. This - is useful to implement offline updates of the vendor operating - system resources in <filename>/usr</filename> that require - updating of <filename>/etc</filename> or - <filename>/var</filename> on the next following boot. Units - making use of this condition should order themselves before - <citerefentry><refentrytitle>systemd-update-done.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - to make sure they run before the stamp file's modification - time gets reset indicating a completed update.</para> - - <para><varname>ConditionFirstBoot=</varname> takes a boolean - argument. This condition may be used to conditionalize units - on whether the system is booting up with an unpopulated - <filename>/etc</filename> directory. This may be used to - populate <filename>/etc</filename> on the first boot after - factory reset, or when a new system instances boots up for the - first time.</para> - - <para>With <varname>ConditionPathExists=</varname> a file - existence condition is checked before a unit is started. If - the specified absolute path name does not exist, the condition - will fail. If the absolute path name passed to - <varname>ConditionPathExists=</varname> is prefixed with an - exclamation mark (<literal>!</literal>), the test is negated, - and the unit is only started if the path does not - exist.</para> - - <para><varname>ConditionPathExistsGlob=</varname> is similar - to <varname>ConditionPathExists=</varname>, but checks for the - existence of at least one file or directory matching the - specified globbing pattern.</para> - - <para><varname>ConditionPathIsDirectory=</varname> is similar - to <varname>ConditionPathExists=</varname> but verifies - whether a certain path exists and is a directory.</para> - - <para><varname>ConditionPathIsSymbolicLink=</varname> is - similar to <varname>ConditionPathExists=</varname> but - verifies whether a certain path exists and is a symbolic - link.</para> - - <para><varname>ConditionPathIsMountPoint=</varname> is similar - to <varname>ConditionPathExists=</varname> but verifies - whether a certain path exists and is a mount point.</para> - - <para><varname>ConditionPathIsReadWrite=</varname> is similar - to <varname>ConditionPathExists=</varname> but verifies - whether the underlying file system is readable and writable - (i.e. not mounted read-only).</para> - - <para><varname>ConditionDirectoryNotEmpty=</varname> is - similar to <varname>ConditionPathExists=</varname> but - verifies whether a certain path exists and is a non-empty - directory.</para> - - <para><varname>ConditionFileNotEmpty=</varname> is similar to - <varname>ConditionPathExists=</varname> but verifies whether a - certain path exists and refers to a regular file with a - non-zero size.</para> - - <para><varname>ConditionFileIsExecutable=</varname> is similar - to <varname>ConditionPathExists=</varname> but verifies - whether a certain path exists, is a regular file and marked - executable.</para> - - <para>If multiple conditions are specified, the unit will be - executed if all of them apply (i.e. a logical AND is applied). - Condition checks can be prefixed with a pipe symbol (|) in - which case a condition becomes a triggering condition. If at - least one triggering condition is defined for a unit, then the - unit will be executed if at least one of the triggering - conditions apply and all of the non-triggering conditions. If - you prefix an argument with the pipe symbol and an exclamation - mark, the pipe symbol must be passed first, the exclamation - second. Except for - <varname>ConditionPathIsSymbolicLink=</varname>, all path - checks follow symlinks. If any of these options is assigned - the empty string, the list of conditions is reset completely, - all previous condition settings (of any kind) will have no - effect.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>AssertArchitecture=</varname></term> - <term><varname>AssertVirtualization=</varname></term> - <term><varname>AssertHost=</varname></term> - <term><varname>AssertKernelCommandLine=</varname></term> - <term><varname>AssertSecurity=</varname></term> - <term><varname>AssertCapability=</varname></term> - <term><varname>AssertACPower=</varname></term> - <term><varname>AssertNeedsUpdate=</varname></term> - <term><varname>AssertFirstBoot=</varname></term> - <term><varname>AssertPathExists=</varname></term> - <term><varname>AssertPathExistsGlob=</varname></term> - <term><varname>AssertPathIsDirectory=</varname></term> - <term><varname>AssertPathIsSymbolicLink=</varname></term> - <term><varname>AssertPathIsMountPoint=</varname></term> - <term><varname>AssertPathIsReadWrite=</varname></term> - <term><varname>AssertDirectoryNotEmpty=</varname></term> - <term><varname>AssertFileNotEmpty=</varname></term> - <term><varname>AssertFileIsExecutable=</varname></term> - - <listitem><para>Similar to the <varname>ConditionArchitecture=</varname>, - <varname>ConditionVirtualization=</varname>, …, condition settings described above, these settings add - assertion checks to the start-up of the unit. However, unlike the conditions settings, any assertion setting - that is not met results in failure of the start job (which means this is logged loudly). Use assertion - expressions for units that cannot operate when specific requirements are not met, and when this is something - the administrator or user should look into.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>SourcePath=</varname></term> - <listitem><para>A path to a configuration file this unit has - been generated from. This is primarily useful for - implementation of generator tools that convert configuration - from an external configuration file format into native unit - files. This functionality should not be used in normal - units.</para></listitem> - </varlistentry> - - </variablelist> - - </refsect1> - - <refsect1> - <title>[Install] Section Options</title> - - <para>Unit files may include an <literal>[Install]</literal> section, which carries installation information for - the unit. This section is not interpreted by - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry> during runtime; it is - used by the <command>enable</command> and <command>disable</command> commands of the - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> tool during - installation of a unit. Note that settings in the <literal>[Install]</literal> section may not appear in - <filename>.d/*.conf</filename> unit file drop-ins (see above).</para> - - <variablelist class='unit-directives'> - <varlistentry> - <term><varname>Alias=</varname></term> - - <listitem><para>A space-separated list of additional names this unit shall be installed under. The names listed - here must have the same suffix (i.e. type) as the unit file name. This option may be specified more than once, - in which case all listed names are used. At installation time, <command>systemctl enable</command> will create - symlinks from these names to the unit filename. Note that not all unit types support such alias names, and this - setting is not supported for them. Specifically, mount, slice, swap, and automount units do not support - aliasing.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>WantedBy=</varname></term> - <term><varname>RequiredBy=</varname></term> - - <listitem><para>This option may be used more than once, or a - space-separated list of unit names may be given. A symbolic - link is created in the <filename>.wants/</filename> or - <filename>.requires/</filename> directory of each of the - listed units when this unit is installed by <command>systemctl - enable</command>. This has the effect that a dependency of - type <varname>Wants=</varname> or <varname>Requires=</varname> - is added from the listed unit to the current unit. The primary - result is that the current unit will be started when the - listed unit is started. See the description of - <varname>Wants=</varname> and <varname>Requires=</varname> in - the [Unit] section for details.</para> - - <para><command>WantedBy=foo.service</command> in a service - <filename>bar.service</filename> is mostly equivalent to - <command>Alias=foo.service.wants/bar.service</command> in the - same file. In case of template units, <command>systemctl - enable</command> must be called with an instance name, and - this instance will be added to the - <filename>.wants/</filename> or - <filename>.requires/</filename> list of the listed unit. E.g. - <command>WantedBy=getty.target</command> in a service - <filename>getty@.service</filename> will result in - <command>systemctl enable getty@tty2.service</command> - creating a - <filename>getty.target.wants/getty@tty2.service</filename> - link to <filename>getty@.service</filename>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Also=</varname></term> - - <listitem><para>Additional units to install/deinstall when - this unit is installed/deinstalled. If the user requests - installation/deinstallation of a unit with this option - configured, <command>systemctl enable</command> and - <command>systemctl disable</command> will automatically - install/uninstall units listed in this option as well.</para> - - <para>This option may be used more than once, or a - space-separated list of unit names may be - given.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>DefaultInstance=</varname></term> - - <listitem><para>In template unit files, this specifies for - which instance the unit shall be enabled if the template is - enabled without any explicitly set instance. This option has - no effect in non-template unit files. The specified string - must be usable as instance identifier.</para></listitem> - </varlistentry> - </variablelist> - - <para>The following specifiers are interpreted in the Install - section: %n, %N, %p, %i, %U, %u, %m, %H, %b, %v. For their meaning - see the next section. - </para> - </refsect1> - - <refsect1> - <title>Specifiers</title> - - <para>Many settings resolve specifiers which may be used to write - generic unit files referring to runtime or unit parameters that - are replaced when the unit files are loaded. The following - specifiers are understood:</para> - - <table> - <title>Specifiers available in unit files</title> - <tgroup cols='3' align='left' colsep='1' rowsep='1'> - <colspec colname="spec" /> - <colspec colname="mean" /> - <colspec colname="detail" /> - <thead> - <row> - <entry>Specifier</entry> - <entry>Meaning</entry> - <entry>Details</entry> - </row> - </thead> - <tbody> - <row> - <entry><literal>%n</literal></entry> - <entry>Full unit name</entry> - <entry></entry> - </row> - <row> - <entry><literal>%N</literal></entry> - <entry>Unescaped full unit name</entry> - <entry>Same as <literal>%n</literal>, but with escaping undone</entry> - </row> - <row> - <entry><literal>%p</literal></entry> - <entry>Prefix name</entry> - <entry>For instantiated units, this refers to the string before the <literal>@</literal> character of the unit name. For non-instantiated units, this refers to the name of the unit with the type suffix removed.</entry> - </row> - <row> - <entry><literal>%P</literal></entry> - <entry>Unescaped prefix name</entry> - <entry>Same as <literal>%p</literal>, but with escaping undone</entry> - </row> - <row> - <entry><literal>%i</literal></entry> - <entry>Instance name</entry> - <entry>For instantiated units: this is the string between the <literal>@</literal> character and the suffix of the unit name.</entry> - </row> - <row> - <entry><literal>%I</literal></entry> - <entry>Unescaped instance name</entry> - <entry>Same as <literal>%i</literal>, but with escaping undone</entry> - </row> - <row> - <entry><literal>%f</literal></entry> - <entry>Unescaped filename</entry> - <entry>This is either the unescaped instance name (if applicable) with <filename>/</filename> prepended (if applicable), or the prefix name prepended with <filename>/</filename>.</entry> - </row> - <row> - <entry><literal>%c</literal></entry> - <entry>Control group path of the unit</entry> - <entry>This path does not include the <filename>/sys/fs/cgroup/systemd/</filename> prefix.</entry> - </row> - <row> - <entry><literal>%r</literal></entry> - <entry>Control group path of the slice the unit is placed in</entry> - <entry>This usually maps to the parent cgroup path of <literal>%c</literal>.</entry> - </row> - <row> - <entry><literal>%R</literal></entry> - <entry>Root control group path below which slices and units are placed</entry> - <entry>For system instances, this resolves to <filename>/</filename>, except in containers, where this maps to the container's root control group path.</entry> - </row> - <row> - <entry><literal>%t</literal></entry> - <entry>Runtime directory</entry> - <entry>This is either <filename>/run</filename> (for the system manager) or the path <literal>$XDG_RUNTIME_DIR</literal> resolves to (for user managers).</entry> - </row> - <row> - <entry><literal>%u</literal></entry> - <entry>User name</entry> - <entry>This is the name of the user running the service manager instance. In case of the system manager this resolves to <literal>root</literal>.</entry> - </row> - <row> - <entry><literal>%U</literal></entry> - <entry>User UID</entry> - <entry>This is the numeric UID of the user running the service manager instance. In case of the system manager this resolves to <literal>0</literal>.</entry> - </row> - <row> - <entry><literal>%h</literal></entry> - <entry>User home directory</entry> - <entry>This is the home directory of the user running the service manager instance. In case of the system manager this resolves to <literal>/root</literal>.</entry> - </row> - <row> - <entry><literal>%s</literal></entry> - <entry>User shell</entry> - <entry>This is the shell of the user running the service manager instance. In case of the system manager this resolves to <literal>/bin/sh</literal>.</entry> - </row> - <row> - <entry><literal>%m</literal></entry> - <entry>Machine ID</entry> - <entry>The machine ID of the running system, formatted as string. See <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry> for more information.</entry> - </row> - <row> - <entry><literal>%b</literal></entry> - <entry>Boot ID</entry> - <entry>The boot ID of the running system, formatted as string. See <citerefentry><refentrytitle>random</refentrytitle><manvolnum>4</manvolnum></citerefentry> for more information.</entry> - </row> - <row> - <entry><literal>%H</literal></entry> - <entry>Host name</entry> - <entry>The hostname of the running system at the point in time the unit configuration is loaded.</entry> - </row> - <row> - <entry><literal>%v</literal></entry> - <entry>Kernel release</entry> - <entry>Identical to <command>uname -r</command> output</entry> - </row> - <row> - <entry><literal>%%</literal></entry> - <entry>Single percent sign</entry> - <entry>Use <literal>%%</literal> in place of <literal>%</literal> to specify a single percent sign.</entry> - </row> - </tbody> - </tgroup> - </table> - - <para>Please note that specifiers <literal>%U</literal>, - <literal>%h</literal>, <literal>%s</literal> are mostly useless - when systemd is running in system mode. PID 1 cannot query the - user account database for information, so the specifiers only work - as shortcuts for things which are already specified in a different - way in the unit file. They are fully functional when systemd is - running in <option>--user</option> mode.</para> - </refsect1> - - <refsect1> - <title>Examples</title> - - <example> - <title>Allowing units to be enabled</title> - - <para>The following snippet (highlighted) allows a unit (e.g. - <filename>foo.service</filename>) to be enabled via - <command>systemctl enable</command>:</para> - - <programlisting>[Unit] -Description=Foo - -[Service] -ExecStart=/usr/sbin/foo-daemon - -<emphasis>[Install]</emphasis> -<emphasis>WantedBy=multi-user.target</emphasis></programlisting> - - <para>After running <command>systemctl enable</command>, a - symlink - <filename>/etc/systemd/system/multi-user.target.wants/foo.service</filename> - linking to the actual unit will be created. It tells systemd to - pull in the unit when starting - <filename>multi-user.target</filename>. The inverse - <command>systemctl disable</command> will remove that symlink - again.</para> - </example> - - <example> - <title>Overriding vendor settings</title> - - <para>There are two methods of overriding vendor settings in - unit files: copying the unit file from - <filename>/usr/lib/systemd/system</filename> to - <filename>/etc/systemd/system</filename> and modifying the - chosen settings. Alternatively, one can create a directory named - <filename><replaceable>unit</replaceable>.d/</filename> within - <filename>/etc/systemd/system</filename> and place a drop-in - file <filename><replaceable>name</replaceable>.conf</filename> - there that only changes the specific settings one is interested - in. Note that multiple such drop-in files are read if - present.</para> - - <para>The advantage of the first method is that one easily - overrides the complete unit, the vendor unit is not parsed at - all anymore. It has the disadvantage that improvements to the - unit file by the vendor are not automatically incorporated on - updates.</para> - - <para>The advantage of the second method is that one only - overrides the settings one specifically wants, where updates to - the unit by the vendor automatically apply. This has the - disadvantage that some future updates by the vendor might be - incompatible with the local changes.</para> - - <para>Note that for drop-in files, if one wants to remove - entries from a setting that is parsed as a list (and is not a - dependency), such as <varname>ConditionPathExists=</varname> (or - e.g. <varname>ExecStart=</varname> in service units), one needs - to first clear the list before re-adding all entries except the - one that is to be removed. See below for an example.</para> - - <para>This also applies for user instances of systemd, but with - different locations for the unit files. See the section on unit - load paths for further details.</para> - - <para>Suppose there is a vendor-supplied unit - <filename>/usr/lib/systemd/system/httpd.service</filename> with - the following contents:</para> - - <programlisting>[Unit] -Description=Some HTTP server -After=remote-fs.target sqldb.service -Requires=sqldb.service -AssertPathExists=/srv/webserver - -[Service] -Type=notify -ExecStart=/usr/sbin/some-fancy-httpd-server -Nice=5 - -[Install] -WantedBy=multi-user.target</programlisting> - - <para>Now one wants to change some settings as an administrator: - firstly, in the local setup, <filename>/srv/webserver</filename> - might not exist, because the HTTP server is configured to use - <filename>/srv/www</filename> instead. Secondly, the local - configuration makes the HTTP server also depend on a memory - cache service, <filename>memcached.service</filename>, that - should be pulled in (<varname>Requires=</varname>) and also be - ordered appropriately (<varname>After=</varname>). Thirdly, in - order to harden the service a bit more, the administrator would - like to set the <varname>PrivateTmp=</varname> setting (see - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details). And lastly, the administrator would like to reset - the niceness of the service to its default value of 0.</para> - - <para>The first possibility is to copy the unit file to - <filename>/etc/systemd/system/httpd.service</filename> and - change the chosen settings:</para> - - <programlisting>[Unit] -Description=Some HTTP server -After=remote-fs.target sqldb.service <emphasis>memcached.service</emphasis> -Requires=sqldb.service <emphasis>memcached.service</emphasis> -AssertPathExists=<emphasis>/srv/www</emphasis> - -[Service] -Type=notify -ExecStart=/usr/sbin/some-fancy-httpd-server -<emphasis>Nice=0</emphasis> -<emphasis>PrivateTmp=yes</emphasis> - -[Install] -WantedBy=multi-user.target</programlisting> - - <para>Alternatively, the administrator could create a drop-in - file - <filename>/etc/systemd/system/httpd.service.d/local.conf</filename> - with the following contents:</para> - - <programlisting>[Unit] -After=memcached.service -Requires=memcached.service -# Reset all assertions and then re-add the condition we want -AssertPathExists= -AssertPathExists=/srv/www - -[Service] -Nice=0 -PrivateTmp=yes</programlisting> - - <para>Note that dependencies (<varname>After=</varname>, etc.) - cannot be reset to an empty list, so dependencies can only be - added in drop-ins. If you want to remove dependencies, you have - to override the entire unit.</para> - - </example> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-analyze</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>uname</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/systemd.xml b/man/systemd.xml deleted file mode 100644 index e05a9d6e29..0000000000 --- a/man/systemd.xml +++ /dev/null @@ -1,1153 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="systemd" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>systemd</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>systemd</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>systemd</refname> - <refname>init</refname> - <refpurpose>systemd system and service manager</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>systemd <arg choice="opt" rep="repeat">OPTIONS</arg></command> - </cmdsynopsis> - <cmdsynopsis> - <command>init <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="req">COMMAND</arg></command> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>systemd is a system and service manager for GNU/Linux operating - systems. When run as first process on boot (as PID 1), it acts as - init system that brings up and maintains userspace - services.</para> - - <para>For compatibility with SysV, if systemd is called as - <command>init</command> and a PID that is not 1, it will execute - <command>telinit</command> and pass all command line arguments - unmodified. That means <command>init</command> and - <command>telinit</command> are mostly equivalent when invoked from - normal login sessions. See - <citerefentry><refentrytitle>telinit</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for more information.</para> - - <para>When run as a system instance, systemd interprets the - configuration file <filename>system.conf</filename> and the files - in <filename>system.conf.d</filename> directories; when run as a - user instance, systemd interprets the configuration file - <filename>user.conf</filename> and the files in - <filename>user.conf.d</filename> directories. See - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--test</option></term> - - <listitem><para>Determine startup sequence, dump it and exit. - This is an option useful for debugging only.</para></listitem> - </varlistentry> - <varlistentry> - <term><option>--dump-configuration-items</option></term> - - <listitem><para>Dump understood unit configuration items. This - outputs a terse but complete list of configuration items - understood in unit definition files.</para></listitem> - </varlistentry> - <varlistentry> - <term><option>--unit=</option></term> - - <listitem><para>Set default unit to activate on startup. If - not specified, defaults to - <filename>default.target</filename>.</para></listitem> - </varlistentry> - <varlistentry> - <term><option>--system</option></term> - <term><option>--user</option></term> - - <listitem><para>For <option>--system</option>, tell systemd to - run a system instance, even if the process ID is not 1, i.e. - systemd is not run as init process. <option>--user</option> - does the opposite, running a user instance even if the process - ID is 1. Normally, it should not be necessary to pass these - options, as systemd automatically detects the mode it is - started in. These options are hence of little use except for - debugging. Note that it is not supported booting and - maintaining a full system with systemd running in - <option>--system</option> mode, but PID not 1. In practice, - passing <option>--system</option> explicitly is only useful in - conjunction with <option>--test</option>.</para></listitem> - </varlistentry> - <varlistentry> - <term><option>--dump-core</option></term> - - <listitem><para>Enable core dumping on crash. This switch has - no effect when running as user instance. This setting may also - be enabled during boot on the kernel command line via the - <varname>systemd.dump_core=</varname> option, see - below.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--crash-vt=</option><replaceable>VT</replaceable></term> - - <listitem><para>Switch to a specific virtual console (VT) on - crash. Takes a positive integer in the range 1–63, or a - boolean argument. If an integer is passed, selects which VT to - switch to. If <constant>yes</constant>, the VT kernel messages - are written to is selected. If <constant>no</constant>, no VT - switch is attempted. This switch has no effect when running as - user instance. This setting may also be enabled during boot, - on the kernel command line via the - <varname>systemd.crash_vt=</varname> option, see - below.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--crash-shell</option></term> - - <listitem><para>Run a shell on crash. This switch has no - effect when running as user instance. This setting may also be - enabled during boot, on the kernel command line via the - <varname>systemd.crash_shell=</varname> option, see - below.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--crash-reboot</option></term> - - <listitem><para>Automatically reboot the system on crash. This - switch has no effect when running as user instance. This - setting may also be enabled during boot, on the kernel command - line via the <varname>systemd.crash_reboot=</varname> option, - see below.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--confirm-spawn</option></term> - - <listitem><para>Ask for confirmation when spawning processes. - This switch has no effect when run as user - instance.</para></listitem> - </varlistentry> - <varlistentry> - <term><option>--show-status=</option></term> - - <listitem><para>Show terse service status information while - booting. This switch has no effect when run as user instance. - Takes a boolean argument which may be omitted which is - interpreted as <option>true</option>.</para></listitem> - </varlistentry> - <varlistentry> - <term><option>--log-target=</option></term> - - <listitem><para>Set log target. Argument must be one of - <option>console</option>, - <option>journal</option>, - <option>kmsg</option>, - <option>journal-or-kmsg</option>, - <option>null</option>.</para></listitem> - </varlistentry> - <varlistentry> - <term><option>--log-level=</option></term> - - <listitem><para>Set log level. As - argument this accepts a numerical log - level or the well-known <citerefentry project='man-pages'><refentrytitle>syslog</refentrytitle><manvolnum>3</manvolnum></citerefentry> - symbolic names (lowercase): - <option>emerg</option>, - <option>alert</option>, - <option>crit</option>, - <option>err</option>, - <option>warning</option>, - <option>notice</option>, - <option>info</option>, - <option>debug</option>.</para></listitem> - </varlistentry> - <varlistentry> - <term><option>--log-color=</option></term> - - <listitem><para>Highlight important log messages. Argument is - a boolean value. If the argument is omitted, it defaults to - <option>true</option>.</para></listitem> - </varlistentry> - <varlistentry> - <term><option>--log-location=</option></term> - - <listitem><para>Include code location in log messages. This is - mostly relevant for debugging purposes. Argument is a boolean - value. If the argument is omitted it defaults to - <option>true</option>.</para></listitem> - </varlistentry> - <varlistentry> - <term><option>--default-standard-output=</option></term> - <term><option>--default-standard-error=</option></term> - - <listitem><para>Sets the default output or error output for - all services and sockets, respectively. That is, controls the - default for <option>StandardOutput=</option> and - <option>StandardError=</option> (see - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details). Takes one of - <option>inherit</option>, - <option>null</option>, - <option>tty</option>, - <option>journal</option>, - <option>journal+console</option>, - <option>syslog</option>, - <option>syslog+console</option>, - <option>kmsg</option>, - <option>kmsg+console</option>. If the - argument is omitted - <option>--default-standard-output=</option> defaults to - <option>journal</option> and - <option>--default-standard-error=</option> to - <option>inherit</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--machine-id=</option></term> - - <listitem><para>Override the machine-id set on the hard drive, - useful for network booting or for containers. May not be set - to all zeros.</para></listitem> - </varlistentry> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - </variablelist> - </refsect1> - - <refsect1> - <title>Concepts</title> - - <para>systemd provides a dependency system between various - entities called "units" of 12 different types. Units encapsulate - various objects that are relevant for system boot-up and - maintenance. The majority of units are configured in unit - configuration files, whose syntax and basic set of options is - described in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - however some are created automatically from other configuration, - dynamically from system state or programmatically at runtime. - Units may be "active" (meaning started, bound, plugged in, ..., - depending on the unit type, see below), or "inactive" (meaning - stopped, unbound, unplugged, ...), as well as in the process of - being activated or deactivated, i.e. between the two states (these - states are called "activating", "deactivating"). A special - "failed" state is available as well, which is very similar to - "inactive" and is entered when the service failed in some way - (process returned error code on exit, or crashed, or an operation - timed out). If this state is entered, the cause will be logged, - for later reference. Note that the various unit types may have a - number of additional substates, which are mapped to the five - generalized unit states described here.</para> - - <para>The following unit types are available:</para> - - <orderedlist> - <listitem><para>Service units, which start and control daemons - and the processes they consist of. For details, see - <citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem> - - <listitem><para>Socket units, which encapsulate local IPC or - network sockets in the system, useful for socket-based - activation. For details about socket units, see - <citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - for details on socket-based activation and other forms of - activation, see - <citerefentry><refentrytitle>daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para></listitem> - - <listitem><para>Target units are useful to group units, or - provide well-known synchronization points during boot-up, see - <citerefentry><refentrytitle>systemd.target</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem> - - <listitem><para>Device units expose kernel devices in systemd - and may be used to implement device-based activation. For - details, see - <citerefentry><refentrytitle>systemd.device</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem> - - <listitem><para>Mount units control mount points in the file - system, for details see - <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem> - - <listitem><para>Automount units provide automount capabilities, - for on-demand mounting of file systems as well as parallelized - boot-up. See - <citerefentry><refentrytitle>systemd.automount</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem> - - <listitem><para>Timer units are useful for triggering activation - of other units based on timers. You may find details in - <citerefentry><refentrytitle>systemd.timer</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem> - - <listitem><para>Swap units are very similar to mount units and - encapsulate memory swap partitions or files of the operating - system. They are described in - <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem> - - <listitem><para>Path units may be used to activate other - services when file system objects change or are modified. See - <citerefentry><refentrytitle>systemd.path</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem> - - <listitem><para>Slice units may be used to group units which - manage system processes (such as service and scope units) in a - hierarchical tree for resource management purposes. See - <citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem> - - <listitem><para>Scope units are similar to service units, but - manage foreign processes instead of starting them as well. See - <citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para></listitem> - - </orderedlist> - - <para>Units are named as their configuration files. Some units - have special semantics. A detailed list is available in - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - - <para>systemd knows various kinds of dependencies, including - positive and negative requirement dependencies (i.e. - <varname>Requires=</varname> and <varname>Conflicts=</varname>) as - well as ordering dependencies (<varname>After=</varname> and - <varname>Before=</varname>). NB: ordering and requirement - dependencies are orthogonal. If only a requirement dependency - exists between two units (e.g. <filename>foo.service</filename> - requires <filename>bar.service</filename>), but no ordering - dependency (e.g. <filename>foo.service</filename> after - <filename>bar.service</filename>) and both are requested to start, - they will be started in parallel. It is a common pattern that both - requirement and ordering dependencies are placed between two - units. Also note that the majority of dependencies are implicitly - created and maintained by systemd. In most cases, it should be - unnecessary to declare additional dependencies manually, however - it is possible to do this.</para> - - <para>Application programs and units (via dependencies) may - request state changes of units. In systemd, these requests are - encapsulated as 'jobs' and maintained in a job queue. Jobs may - succeed or can fail, their execution is ordered based on the - ordering dependencies of the units they have been scheduled - for.</para> - - <para>On boot systemd activates the target unit - <filename>default.target</filename> whose job is to activate - on-boot services and other on-boot units by pulling them in via - dependencies. Usually, the unit name is just an alias (symlink) for - either <filename>graphical.target</filename> (for fully-featured - boots into the UI) or <filename>multi-user.target</filename> (for - limited console-only boots for use in embedded or server - environments, or similar; a subset of graphical.target). However, - it is at the discretion of the administrator to configure it as an - alias to any other target unit. See - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details about these target units.</para> - - <para>Processes systemd spawns are placed in individual Linux - control groups named after the unit which they belong to in the - private systemd hierarchy. (see <ulink - url="https://www.kernel.org/doc/Documentation/cgroups/cgroups.txt">cgroups.txt</ulink> - for more information about control groups, or short "cgroups"). - systemd uses this to effectively keep track of processes. Control - group information is maintained in the kernel, and is accessible - via the file system hierarchy (beneath - <filename>/sys/fs/cgroup/systemd/</filename>), or in tools such as - <citerefentry project='man-pages'><refentrytitle>systemd-cgls</refentrytitle><manvolnum>1</manvolnum></citerefentry> - or - <citerefentry project='man-pages'><refentrytitle>ps</refentrytitle><manvolnum>1</manvolnum></citerefentry> - (<command>ps xawf -eo pid,user,cgroup,args</command> is - particularly useful to list all processes and the systemd units - they belong to.).</para> - - <para>systemd is compatible with the SysV init system to a large - degree: SysV init scripts are supported and simply read as an - alternative (though limited) configuration file format. The SysV - <filename>/dev/initctl</filename> interface is provided, and - compatibility implementations of the various SysV client tools are - available. In addition to that, various established Unix - functionality such as <filename>/etc/fstab</filename> or the - <filename>utmp</filename> database are supported.</para> - - <para>systemd has a minimal transaction system: if a unit is - requested to start up or shut down it will add it and all its - dependencies to a temporary transaction. Then, it will verify if - the transaction is consistent (i.e. whether the ordering of all - units is cycle-free). If it is not, systemd will try to fix it up, - and removes non-essential jobs from the transaction that might - remove the loop. Also, systemd tries to suppress non-essential - jobs in the transaction that would stop a running service. Finally - it is checked whether the jobs of the transaction contradict jobs - that have already been queued, and optionally the transaction is - aborted then. If all worked out and the transaction is consistent - and minimized in its impact it is merged with all already - outstanding jobs and added to the run queue. Effectively this - means that before executing a requested operation, systemd will - verify that it makes sense, fixing it if possible, and only - failing if it really cannot work.</para> - - <para>Systemd contains native implementations of various tasks - that need to be executed as part of the boot process. For example, - it sets the hostname or configures the loopback network device. It - also sets up and mounts various API file systems, such as - <filename>/sys</filename> or <filename>/proc</filename>.</para> - - <para>For more information about the concepts and - ideas behind systemd, please refer to the - <ulink url="http://0pointer.de/blog/projects/systemd.html">Original Design Document</ulink>.</para> - - <para>Note that some but not all interfaces provided - by systemd are covered by the - <ulink url="http://www.freedesktop.org/wiki/Software/systemd/InterfaceStabilityPromise">Interface - Stability Promise</ulink>.</para> - - <para>Units may be generated dynamically at boot and system - manager reload time, for example based on other configuration - files or parameters passed on the kernel command line. For details, see - <citerefentry><refentrytitle>systemd.generator</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - - <para>Systems which invoke systemd in a container or initrd - environment should implement the - <ulink url="http://www.freedesktop.org/wiki/Software/systemd/ContainerInterface">Container Interface</ulink> or - <ulink url="http://www.freedesktop.org/wiki/Software/systemd/InitrdInterface">initrd Interface</ulink> - specifications, respectively.</para> - </refsect1> - - <refsect1> - <title>Directories</title> - - <variablelist> - <varlistentry> - <term>System unit directories</term> - - <listitem><para>The systemd system manager reads unit - configuration from various directories. Packages that want to - install unit files shall place them in the directory returned - by <command>pkg-config systemd - --variable=systemdsystemunitdir</command>. Other directories - checked are <filename>/usr/local/lib/systemd/system</filename> - and <filename>/usr/lib/systemd/system</filename>. User - configuration always takes precedence. <command>pkg-config - systemd --variable=systemdsystemconfdir</command> returns the - path of the system configuration directory. Packages should - alter the content of these directories only with the - <command>enable</command> and <command>disable</command> - commands of the - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - tool. Full list of directories is provided in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - </variablelist> - - <variablelist> - <varlistentry> - <term>User unit directories</term> - - <listitem><para>Similar rules apply for the user unit - directories. However, here the - <ulink url="http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html">XDG - Base Directory specification</ulink> is followed to find - units. Applications should place their unit files in the - directory returned by <command>pkg-config systemd - --variable=systemduserunitdir</command>. Global configuration - is done in the directory reported by <command>pkg-config - systemd --variable=systemduserconfdir</command>. The - <command>enable</command> and <command>disable</command> - commands of the - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - tool can handle both global (i.e. for all users) and private - (for one user) enabling/disabling of units. Full list of - directories is provided in - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - </variablelist> - - <variablelist> - <varlistentry> - <term>SysV init scripts directory</term> - - <listitem><para>The location of the SysV init script directory - varies between distributions. If systemd cannot find a native - unit file for a requested service, it will look for a SysV - init script of the same name (with the - <filename>.service</filename> suffix - removed).</para></listitem> - </varlistentry> - </variablelist> - - <variablelist> - <varlistentry> - <term>SysV runlevel link farm directory</term> - - <listitem><para>The location of the SysV runlevel link farm - directory varies between distributions. systemd will take the - link farm into account when figuring out whether a service - shall be enabled. Note that a service unit with a native unit - configuration file cannot be started by activating it in the - SysV runlevel link farm.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Signals</title> - - <variablelist> - <varlistentry> - <term><constant>SIGTERM</constant></term> - - <listitem><para>Upon receiving this signal the systemd system - manager serializes its state, reexecutes itself and - deserializes the saved state again. This is mostly equivalent - to <command>systemctl daemon-reexec</command>.</para> - - <para>systemd user managers will start the - <filename>exit.target</filename> unit when this signal is - received. This is mostly equivalent to <command>systemctl - --user start exit.target</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGINT</constant></term> - - <listitem><para>Upon receiving this signal the systemd system - manager will start the - <filename>ctrl-alt-del.target</filename> unit. This is mostly - equivalent to <command>systemctl start - ctl-alt-del.target</command>. If this signal is received more - than 7 times per 2s, an immediate reboot is triggered. - Note that pressing Ctrl-Alt-Del on the console will trigger - this signal. Hence, if a reboot is hanging, pressing - Ctrl-Alt-Del more than 7 times in 2s is a relatively safe way - to trigger an immediate reboot.</para> - - <para>systemd user managers treat this signal the same way as - <constant>SIGTERM</constant>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGWINCH</constant></term> - - <listitem><para>When this signal is received the systemd - system manager will start the - <filename>kbrequest.target</filename> unit. This is mostly - equivalent to <command>systemctl start - kbrequest.target</command>.</para> - - <para>This signal is ignored by systemd user - managers.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGPWR</constant></term> - - <listitem><para>When this signal is received the systemd - manager will start the <filename>sigpwr.target</filename> - unit. This is mostly equivalent to <command>systemctl start - sigpwr.target</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGUSR1</constant></term> - - <listitem><para>When this signal is received the systemd - manager will try to reconnect to the D-Bus - bus.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGUSR2</constant></term> - - <listitem><para>When this signal is received the systemd - manager will log its complete state in human-readable form. - The data logged is the same as printed by - <command>systemd-analyze dump</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGHUP</constant></term> - - <listitem><para>Reloads the complete daemon configuration. - This is mostly equivalent to <command>systemctl - daemon-reload</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGRTMIN+0</constant></term> - - <listitem><para>Enters default mode, starts the - <filename>default.target</filename> unit. This is mostly - equivalent to <command>systemctl start - default.target</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGRTMIN+1</constant></term> - - <listitem><para>Enters rescue mode, starts the - <filename>rescue.target</filename> unit. This is mostly - equivalent to <command>systemctl isolate - rescue.target</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGRTMIN+2</constant></term> - - <listitem><para>Enters emergency mode, starts the - <filename>emergency.service</filename> unit. This is mostly - equivalent to <command>systemctl isolate - emergency.service</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGRTMIN+3</constant></term> - - <listitem><para>Halts the machine, starts the - <filename>halt.target</filename> unit. This is mostly - equivalent to <command>systemctl start - halt.target</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGRTMIN+4</constant></term> - - <listitem><para>Powers off the machine, starts the - <filename>poweroff.target</filename> unit. This is mostly - equivalent to <command>systemctl start - poweroff.target</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGRTMIN+5</constant></term> - - <listitem><para>Reboots the machine, starts the - <filename>reboot.target</filename> unit. This is mostly - equivalent to <command>systemctl start - reboot.target</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGRTMIN+6</constant></term> - - <listitem><para>Reboots the machine via kexec, starts the - <filename>kexec.target</filename> unit. This is mostly - equivalent to <command>systemctl start - kexec.target</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGRTMIN+13</constant></term> - - <listitem><para>Immediately halts the machine.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGRTMIN+14</constant></term> - - <listitem><para>Immediately powers off the machine.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGRTMIN+15</constant></term> - - <listitem><para>Immediately reboots the machine.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGRTMIN+16</constant></term> - - <listitem><para>Immediately reboots the machine with kexec.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGRTMIN+20</constant></term> - - <listitem><para>Enables display of status messages on the - console, as controlled via - <varname>systemd.show_status=1</varname> on the kernel command - line.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGRTMIN+21</constant></term> - - <listitem><para>Disables display of - status messages on the console, as - controlled via - <varname>systemd.show_status=0</varname> - on the kernel command - line.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGRTMIN+22</constant></term> - <term><constant>SIGRTMIN+23</constant></term> - - <listitem><para>Sets the log level to <literal>debug</literal> - (or <literal>info</literal> on - <constant>SIGRTMIN+23</constant>), as controlled via - <varname>systemd.log_level=debug</varname> (or - <varname>systemd.log_level=info</varname> on - <constant>SIGRTMIN+23</constant>) on the kernel command - line.</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGRTMIN+24</constant></term> - - <listitem><para>Immediately exits the manager (only available - for --user instances).</para></listitem> - </varlistentry> - - <varlistentry> - <term><constant>SIGRTMIN+26</constant></term> - <term><constant>SIGRTMIN+27</constant></term> - <term><constant>SIGRTMIN+28</constant></term> - - <listitem><para>Sets the log level to - <literal>journal-or-kmsg</literal> (or - <literal>console</literal> on - <constant>SIGRTMIN+27</constant>, <literal>kmsg</literal> on - <constant>SIGRTMIN+28</constant>), as controlled via - <varname>systemd.log_target=journal-or-kmsg</varname> (or - <varname>systemd.log_target=console</varname> on - <constant>SIGRTMIN+27</constant> or - <varname>systemd.log_target=kmsg</varname> on - <constant>SIGRTMIN+28</constant>) on the kernel command - line.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Environment</title> - - <variablelist class='environment-variables'> - <varlistentry> - <term><varname>$SYSTEMD_LOG_LEVEL</varname></term> - <listitem><para>systemd reads the log level from this - environment variable. This can be overridden with - <option>--log-level=</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$SYSTEMD_LOG_TARGET</varname></term> - <listitem><para>systemd reads the log target from this - environment variable. This can be overridden with - <option>--log-target=</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$SYSTEMD_LOG_COLOR</varname></term> - <listitem><para>Controls whether systemd highlights important - log messages. This can be overridden with - <option>--log-color=</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$SYSTEMD_LOG_LOCATION</varname></term> - <listitem><para>Controls whether systemd prints the code - location along with log messages. This can be overridden with - <option>--log-location=</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$XDG_CONFIG_HOME</varname></term> - <term><varname>$XDG_CONFIG_DIRS</varname></term> - <term><varname>$XDG_DATA_HOME</varname></term> - <term><varname>$XDG_DATA_DIRS</varname></term> - - <listitem><para>The systemd user manager uses these variables - in accordance to the <ulink - url="http://standards.freedesktop.org/basedir-spec/basedir-spec-latest.html">XDG - Base Directory specification</ulink> to find its - configuration.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$SYSTEMD_UNIT_PATH</varname></term> - - <listitem><para>Controls where systemd looks for unit - files.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$SYSTEMD_SYSVINIT_PATH</varname></term> - - <listitem><para>Controls where systemd looks for SysV init - scripts.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$SYSTEMD_SYSVRCND_PATH</varname></term> - - <listitem><para>Controls where systemd looks for SysV init - script runlevel link farms.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$SYSTEMD_COLORS</varname></term> - - <listitem><para>Controls whether colorized output should be generated. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$LISTEN_PID</varname></term> - <term><varname>$LISTEN_FDS</varname></term> - <term><varname>$LISTEN_FDNAMES</varname></term> - - <listitem><para>Set by systemd for supervised processes during - socket-based activation. See - <citerefentry><refentrytitle>sd_listen_fds</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for more information. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>$NOTIFY_SOCKET</varname></term> - - <listitem><para>Set by systemd for supervised processes for - status and start-up completion notification. See - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry> - for more information. </para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>Kernel Command Line</title> - - <para>When run as system instance systemd parses a number of - kernel command line arguments<footnote><para>If run inside a Linux - container these arguments may be passed as command line arguments - to systemd itself, next to any of the command line options listed - in the Options section above. If run outside of Linux containers, - these arguments are parsed from <filename>/proc/cmdline</filename> - instead.</para></footnote>:</para> - - <variablelist class='kernel-commandline-options'> - <varlistentry> - <term><varname>systemd.unit=</varname></term> - <term><varname>rd.systemd.unit=</varname></term> - - <listitem><para>Overrides the unit to activate on boot. - Defaults to <filename>default.target</filename>. This may be - used to temporarily boot into a different boot unit, for - example <filename>rescue.target</filename> or - <filename>emergency.service</filename>. See - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry> - for details about these units. The option prefixed with - <literal>rd.</literal> is honored only in the initial RAM disk - (initrd), while the one that is not prefixed only in the main - system.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>systemd.dump_core=</varname></term> - - <listitem><para>Takes a boolean argument. If - <option>yes</option>, the systemd manager (PID 1) dumps core - when it crashes. Otherwise, no core dump is created. Defaults - to <option>yes</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>systemd.crash_chvt=</varname></term> - - <listitem><para>Takes a positive integer, or a boolean - argument. If a positive integer (in the range 1–63) is - specified, the system manager (PID 1) will activate the specified - virtual terminal (VT) when it crashes. Defaults to - <constant>no</constant>, meaning that no such switch is - attempted. If set to <constant>yes</constant>, the VT the - kernel messages are written to is selected.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>systemd.crash_shell=</varname></term> - - <listitem><para>Takes a boolean argument. If - <option>yes</option>, the system manager (PID 1) spawns a - shell when it crashes, after a 10s delay. Otherwise, no shell - is spawned. Defaults to <option>no</option>, for security - reasons, as the shell is not protected by password - authentication.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>systemd.crash_reboot=</varname></term> - - <listitem><para>Takes a boolean argument. If - <option>yes</option>, the system manager (PID 1) will reboot - the machine automatically when it crashes, after a 10s delay. - Otherwise, the system will hang indefinitely. Defaults to - <option>no</option>, in order to avoid a reboot loop. If - combined with <varname>systemd.crash_shell=</varname>, the - system is rebooted after the shell exits.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>systemd.confirm_spawn=</varname></term> - - <listitem><para>Takes a boolean argument. If - <option>yes</option>, the system manager (PID 1) asks for - confirmation when spawning processes. Defaults to - <option>no</option>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>systemd.show_status=</varname></term> - - <listitem><para>Takes a boolean argument or the constant - <constant>auto</constant>. If <option>yes</option>, the - systemd manager (PID 1) shows terse service status updates on - the console during bootup. <constant>auto</constant> behaves - like <option>false</option> until a service fails or there is - a significant delay in boot. Defaults to - <option>yes</option>, unless <option>quiet</option> is passed - as kernel command line option, in which case it defaults to - <constant>auto</constant>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>systemd.log_target=</varname></term> - <term><varname>systemd.log_level=</varname></term> - <term><varname>systemd.log_color=</varname></term> - <term><varname>systemd.log_location=</varname></term> - - <listitem><para>Controls log output, with the same effect as - the <varname>$SYSTEMD_LOG_TARGET</varname>, - <varname>$SYSTEMD_LOG_LEVEL</varname>, - <varname>$SYSTEMD_LOG_COLOR</varname>, - <varname>$SYSTEMD_LOG_LOCATION</varname> environment variables - described above.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>systemd.default_standard_output=</varname></term> - <term><varname>systemd.default_standard_error=</varname></term> - <listitem><para>Controls default standard output and error - output for services, with the same effect as the - <option>--default-standard-output=</option> and - <option>--default-standard-error=</option> command line - arguments described above, respectively.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>systemd.setenv=</varname></term> - - <listitem><para>Takes a string argument in the form - VARIABLE=VALUE. May be used to set default environment - variables to add to forked child processes. May be used more - than once to set multiple variables.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>systemd.machine_id=</varname></term> - - <listitem><para>Takes a 32 character hex value to be - used for setting the machine-id. Intended mostly for - network booting where the same machine-id is desired - for every boot.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>quiet</varname></term> - - <listitem><para>Turn off status output at boot, much like - <varname>systemd.show_status=false</varname> would. Note that - this option is also read by the kernel itself and disables - kernel log output. Passing this option hence turns off the - usual output from both the system manager and the kernel. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>debug</varname></term> - - <listitem><para>Turn on debugging output. This is equivalent - to <varname>systemd.log_level=debug</varname>. Note that this - option is also read by the kernel itself and enables kernel - debug output. Passing this option hence turns on the debug - output from both the system manager and the - kernel.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>emergency</varname></term> - <term><varname>-b</varname></term> - - <listitem><para>Boot into emergency mode. This is equivalent - to <varname>systemd.unit=emergency.target</varname> and - provided for compatibility reasons and to be easier to - type.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>rescue</varname></term> - <term><varname>single</varname></term> - <term><varname>s</varname></term> - <term><varname>S</varname></term> - <term><varname>1</varname></term> - - <listitem><para>Boot into rescue mode. This is equivalent to - <varname>systemd.unit=rescue.target</varname> and provided for - compatibility reasons and to be easier to - type.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>2</varname></term> - <term><varname>3</varname></term> - <term><varname>4</varname></term> - <term><varname>5</varname></term> - - <listitem><para>Boot into the specified legacy SysV runlevel. - These are equivalent to - <varname>systemd.unit=runlevel2.target</varname>, - <varname>systemd.unit=runlevel3.target</varname>, - <varname>systemd.unit=runlevel4.target</varname>, and - <varname>systemd.unit=runlevel5.target</varname>, - respectively, and provided for compatibility reasons and to be - easier to type.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>locale.LANG=</varname></term> - <term><varname>locale.LANGUAGE=</varname></term> - <term><varname>locale.LC_CTYPE=</varname></term> - <term><varname>locale.LC_NUMERIC=</varname></term> - <term><varname>locale.LC_TIME=</varname></term> - <term><varname>locale.LC_COLLATE=</varname></term> - <term><varname>locale.LC_MONETARY=</varname></term> - <term><varname>locale.LC_MESSAGES=</varname></term> - <term><varname>locale.LC_PAPER=</varname></term> - <term><varname>locale.LC_NAME=</varname></term> - <term><varname>locale.LC_ADDRESS=</varname></term> - <term><varname>locale.LC_TELEPHONE=</varname></term> - <term><varname>locale.LC_MEASUREMENT=</varname></term> - <term><varname>locale.LC_IDENTIFICATION=</varname></term> - - <listitem><para>Set the system locale to use. This overrides - the settings in <filename>/etc/locale.conf</filename>. For - more information, see - <citerefentry project='man-pages'><refentrytitle>locale.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry> - and - <citerefentry project='man-pages'><refentrytitle>locale</refentrytitle><manvolnum>7</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - </variablelist> - - <para>For other kernel command line parameters understood by - components of the core OS, please refer to - <citerefentry><refentrytitle>kernel-command-line</refentrytitle><manvolnum>7</manvolnum></citerefentry>.</para> - </refsect1> - - <refsect1> - <title>Sockets and FIFOs</title> - - <variablelist> - <varlistentry> - <term><filename>/run/systemd/notify</filename></term> - - <listitem><para>Daemon status notification socket. This is an - <constant>AF_UNIX</constant> datagram socket and is used to - implement the daemon notification logic as implemented by - <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>.</para></listitem> - - </varlistentry> - - <varlistentry> - <term><filename>/run/systemd/private</filename></term> - - <listitem><para>Used internally as communication channel - between - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> - and the systemd process. This is an - <constant>AF_UNIX</constant> stream socket. This interface is - private to systemd and should not be used in external - projects.</para></listitem> - </varlistentry> - - <varlistentry> - <term><filename>/dev/initctl</filename></term> - - <listitem><para>Limited compatibility support for the SysV - client interface, as implemented by the - <filename>systemd-initctl.service</filename> unit. This is a - named pipe in the file system. This interface is obsolete and - should not be used in new applications.</para></listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - The <ulink url="http://www.freedesktop.org/wiki/Software/systemd/">systemd Homepage</ulink>, - <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>locale.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-notify</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>pkg-config</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>kernel-command-line</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>bootup</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/sysusers.d.xml b/man/sysusers.d.xml deleted file mode 100644 index 18ee3800d6..0000000000 --- a/man/sysusers.d.xml +++ /dev/null @@ -1,223 +0,0 @@ -<?xml version="1.0"?> -<!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2014 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="sysusers.d" conditional='ENABLE_SYSUSERS' - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>sysusers.d</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>sysusers.d</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>sysusers.d</refname> - <refpurpose>Declarative allocation of system users and groups</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/usr/lib/sysusers.d/*.conf</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-sysusers</command> uses the files from - <filename>sysusers.d</filename> directory to create system users - and groups at package installation or boot time. This tool may be - used to allocate system users and groups only, it is not useful - for creating non-system users and groups, as it accesses - <filename>/etc/passwd</filename> and - <filename>/etc/group</filename> directly, bypassing any more - complex user databases, for example any database involving NIS or - LDAP.</para> - </refsect1> - - <refsect1> - <title>Configuration Format</title> - - <para>Each configuration file shall be named in the style of - <filename><replaceable>package</replaceable>.conf</filename> or - <filename><replaceable>package</replaceable>-<replaceable>part</replaceable>.conf</filename>. - The second variant should be used when it is desirable to make it - easy to override just this part of configuration.</para> - - <para>The file format is one line per user or group containing - name, ID, GECOS field description and home directory:</para> - - <programlisting># Type Name ID GECOS -u httpd 440 "HTTP User" -u authd /usr/bin/authd "Authorization user" -g input - - -m authd input -u root 0 "Superuser" /root</programlisting> - - <refsect2> - <title>Type</title> - - <para>The type consists of a single letter. The following line - types are understood:</para> - - <variablelist> - <varlistentry> - <term><varname>u</varname></term> - <listitem><para>Create a system user and group of the - specified name should they not exist yet. The user's primary - group will be set to the group bearing the same name. The - user's shell will be set to - <filename>/sbin/nologin</filename>, the home directory to - the specified home directory, or <filename>/</filename> if - none is given. The account will be created disabled, so that - logins are not allowed.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>g</varname></term> - <listitem><para>Create a system group of the specified name - should it not exist yet. Note that <varname>u</varname> - implicitly create a matching group. The group will be - created with no password set.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>m</varname></term> - <listitem><para>Add a user to a group. If the user or group - do not exist yet, they will be implicitly - created.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>r</varname></term> - <listitem><para>Add a range of numeric UIDs/GIDs to the pool - to allocate new UIDs and GIDs from. If no line of this type - is specified, the range of UIDs/GIDs is set to some - compiled-in default. Note that both UIDs and GIDs are - allocated from the same pool, in order to ensure that users - and groups of the same name are likely to carry the same - numeric UID and GID.</para></listitem> - </varlistentry> - - </variablelist> - </refsect2> - - <refsect2> - <title>Name</title> - - <para>The name field specifies the user or group name. It should - be shorter than 31 characters and avoid any non-ASCII - characters, and not begin with a numeric character. It is - strongly recommended to pick user and group names that are - unlikely to clash with normal users created by the - administrator. A good scheme to guarantee this is by prefixing - all system and group names with the underscore, and avoiding too - generic names.</para> - - <para>For <varname>m</varname> lines, this field should contain - the user name to add to a group.</para> - - <para>For lines of type <varname>r</varname>, this field should - be set to <literal>-</literal>.</para> - </refsect2> - - <refsect2> - <title>ID</title> - - <para>For <varname>u</varname> and <varname>g</varname>, the - numeric 32-bit UID or GID of the user/group. Do not use IDs 65535 - or 4294967295, as they have special placeholder meanings. - Specify <literal>-</literal> for automatic UID/GID allocation - for the user or group. Alternatively, specify an absolute path - in the file system. In this case, the UID/GID is read from the - path's owner/group. This is useful to create users whose UID/GID - match the owners of pre-existing files (such as SUID or SGID - binaries).</para> - - <para>For <varname>m</varname> lines, this field should contain - the group name to add to a user to.</para> - - <para>For lines of type <varname>r</varname>, this field should - be set to a UID/GID range in the format - <literal>FROM-TO</literal>, where both values are formatted as - decimal ASCII numbers. Alternatively, a single UID/GID may be - specified formatted as decimal ASCII numbers.</para> - </refsect2> - - <refsect2> - <title>GECOS</title> - - <para>A short, descriptive string for users to be created, - enclosed in quotation marks. Note that this field may not - contain colons.</para> - - <para>Only applies to lines of type <varname>u</varname> and - should otherwise be left unset, or be set to - <literal>-</literal>.</para> - </refsect2> - - <refsect2> - <title>Home Directory</title> - - <para>The home directory for a new system user. If omitted, - defaults to the root directory. It is recommended to not - unnecessarily specify home directories for system users, unless - software strictly requires one to be set.</para> - - <para>Only applies to lines of type <varname>u</varname> and - should otherwise be left unset, or be set to - <literal>-</literal>.</para> - </refsect2> - - </refsect1> - - <xi:include href="standard-conf.xml" xpointer="confd" /> - - <refsect1> - <title>Idempotence</title> - - <para>Note that <command>systemd-sysusers</command> will do - nothing if the specified users or groups already exist, so - normally, there is no reason to override - <filename>sysusers.d</filename> vendor configuration, except to - block certain users or groups from being created.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-sysusers</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/telinit.xml b/man/telinit.xml deleted file mode 100644 index 02d31fbd46..0000000000 --- a/man/telinit.xml +++ /dev/null @@ -1,179 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2010 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="telinit" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>telinit</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>telinit</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>telinit</refname> - <refpurpose>Change SysV runlevel</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>telinit <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="req">COMMAND</arg></command> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>telinit</command> may be used to change the SysV - system runlevel. Since the concept of SysV runlevels is obsolete - the runlevel requests will be transparently translated into - systemd unit activation requests.</para> - - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--help</option></term> - - <xi:include href="standard-options.xml" xpointer="help-text" /> - </varlistentry> - - <varlistentry> - <term><option>--no-wall</option></term> - - <listitem><para>Do not send wall message before - reboot/halt/power-off.</para></listitem> - </varlistentry> - </variablelist> - - <para>The following commands are understood:</para> - - <variablelist> - <varlistentry> - <term><command>0</command></term> - - <listitem><para>Power-off the machine. This is translated into - an activation request for <filename>poweroff.target</filename> - and is equivalent to <command>systemctl - poweroff</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>6</command></term> - - <listitem><para>Reboot the machine. This is translated into an - activation request for <filename>reboot.target</filename> and - is equivalent to <command>systemctl - reboot</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>2</command></term> - <term><command>3</command></term> - <term><command>4</command></term> - <term><command>5</command></term> - - <listitem><para>Change the SysV runlevel. This is translated - into an activation request for - <filename>runlevel2.target</filename>, - <filename>runlevel3.target</filename>, ... and is equivalent - to <command>systemctl isolate runlevel2.target</command>, - <command>systemctl isolate runlevel3.target</command>, - ...</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>1</command></term> - <term><command>s</command></term> - <term><command>S</command></term> - - <listitem><para>Change into system rescue mode. This is - translated into an activation request for - <filename>rescue.target</filename> and is equivalent to - <command>systemctl rescue</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>q</command></term> - <term><command>Q</command></term> - - <listitem><para>Reload daemon configuration. This is - equivalent to <command>systemctl - daemon-reload</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>u</command></term> - <term><command>U</command></term> - - <listitem><para>Serialize state, reexecute daemon and - deserialize state again. This is equivalent to - <command>systemctl daemon-reexec</command>.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure - code otherwise.</para> - </refsect1> - - <refsect1> - <title>Notes</title> - - <para>This is a legacy command available for compatibility only. - It should not be used anymore, as the concept of runlevels is - obsolete.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>wall</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/timedatectl.xml b/man/timedatectl.xml deleted file mode 100644 index 415e2c799a..0000000000 --- a/man/timedatectl.xml +++ /dev/null @@ -1,253 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2012 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="timedatectl" conditional='ENABLE_TIMEDATED' - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>timedatectl</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>timedatectl</refentrytitle> - <manvolnum>1</manvolnum> - </refmeta> - - <refnamediv> - <refname>timedatectl</refname> - <refpurpose>Control the system time and date</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>timedatectl <arg choice="opt" rep="repeat">OPTIONS</arg> <arg choice="req">COMMAND</arg></command> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>timedatectl</command> may be used to query and - change the system clock and its settings.</para> - - <para>Use - <citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry> - to initialize the system time zone for mounted (but not booted) - system images.</para> - </refsect1> - - <refsect1> - <title>Options</title> - - <para>The following options are understood:</para> - - <variablelist> - <varlistentry> - <term><option>--no-ask-password</option></term> - - <listitem><para>Do not query the user for authentication for - privileged operations.</para></listitem> - </varlistentry> - - <varlistentry> - <term><option>--adjust-system-clock</option></term> - - <listitem><para>If <command>set-local-rtc</command> is invoked - and this option is passed, the system clock is synchronized - from the RTC again, taking the new setting into account. - Otherwise, the RTC is synchronized from the system - clock.</para></listitem> - </varlistentry> - - <xi:include href="user-system-options.xml" xpointer="host" /> - <xi:include href="user-system-options.xml" xpointer="machine" /> - - <xi:include href="standard-options.xml" xpointer="help" /> - <xi:include href="standard-options.xml" xpointer="version" /> - <xi:include href="standard-options.xml" xpointer="no-pager" /> - </variablelist> - - <para>The following commands are understood:</para> - - <variablelist> - <varlistentry> - <term><command>status</command></term> - - <listitem><para>Show current settings of the system clock and - RTC, including whether network time synchronization is - on. Note that whether network time synchronization is on - simply reflects whether the - <filename>systemd-timesyncd.service</filename> unit is - enabled. Even if this command shows the status as off, a - different service might still synchronize the clock with the - network.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>set-time [TIME]</command></term> - - <listitem><para>Set the system clock to the specified time. - This will also update the RTC time accordingly. The time may - be specified in the format "2012-10-30 - 18:17:16".</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>set-timezone [TIMEZONE]</command></term> - - <listitem><para>Set the system time zone to the specified - value. Available timezones can be listed with - <command>list-timezones</command>. If the RTC is configured to - be in the local time, this will also update the RTC time. This - call will alter the <filename>/etc/localtime</filename> - symlink. See - <citerefentry><refentrytitle>localtime</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for more information.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>list-timezones</command></term> - - <listitem><para>List available time zones, one per line. - Entries from the list can be set as the system timezone with - <command>set-timezone</command>.</para></listitem> - </varlistentry> - - <varlistentry> - <term><command>set-local-rtc [BOOL]</command></term> - - <listitem><para>Takes a boolean argument. If - <literal>0</literal>, the system is configured to maintain the - RTC in universal time. If <literal>1</literal>, it will - maintain the RTC in local time instead. Note that maintaining - the RTC in the local timezone is not fully supported and will - create various problems with time zone changes and daylight - saving adjustments. If at all possible, keep the RTC in UTC - mode. Note that invoking this will also synchronize the RTC - from the system clock, unless - <option>--adjust-system-clock</option> is passed (see above). - This command will change the 3rd line of - <filename>/etc/adjtime</filename>, as documented in - <citerefentry project='man-pages'><refentrytitle>hwclock</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><command>set-ntp [BOOL]</command></term> - - <listitem><para>Takes a boolean argument. Controls whether - network time synchronization is active and enabled (if - available). This enables and starts, or disables and stops the - <filename>systemd-timesyncd.service</filename> unit. It does - not affect the state of any other, unrelated network time - synchronization services that might be installed on the - system. This command is hence mostly equivalent to: - <command>systemctl enable --now - systemd-timesyncd.service</command> and <command>systemctl - disable --now systemd-timesyncd.service</command>, but is - protected by a different access policy.</para> - - <para>Note that even if time synchronization is turned off - with this command, another unrelated system service might - still synchronize the clock with the network. Also note that, - strictly speaking, - <filename>systemd-timesyncd.service</filename> does more than - just network time synchronization, as it ensures a monotonic - clock on systems without RTC even if no network is - available. See - <citerefentry><refentrytitle>systemd-timesyncd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for details about this.</para></listitem> - </varlistentry> - - </variablelist> - - </refsect1> - - <refsect1> - <title>Exit status</title> - - <para>On success, 0 is returned, a non-zero failure - code otherwise.</para> - </refsect1> - - <xi:include href="less-variables.xml" /> - - <refsect1> - <title>Examples</title> - <para>Show current settings: - <programlisting>$ timedatectl - Local time: Di 2015-04-07 16:26:56 CEST - Universal time: Di 2015-04-07 14:26:56 UTC - RTC time: Di 2015-04-07 14:26:56 - Time zone: Europe/Berlin (CEST, +0200) - Network time on: yes -NTP synchronized: yes - RTC in local TZ: no</programlisting> - </para> - - <para>Enable network time synchronization: - <programlisting>$ timedatectl set-ntp true -==== AUTHENTICATING FOR org.freedesktop.timedate1.set-ntp === -Authentication is required to control whether network time synchronization shall be enabled. -Authenticating as: user -Password: ******** -==== AUTHENTICATION COMPLETE ===</programlisting> - - <programlisting>$ systemctl status systemd-timesyncd.service -● systemd-timesyncd.service - Network Time Synchronization - Loaded: loaded (/usr/lib/systemd/system/systemd-timesyncd.service; enabled) - Active: active (running) since Mo 2015-03-30 14:20:38 CEST; 5s ago - Docs: man:systemd-timesyncd.service(8) - Main PID: 595 (systemd-timesyn) - Status: "Using Time Server 216.239.38.15:123 (time4.google.com)." - CGroup: /system.slice/systemd-timesyncd.service - └─595 /usr/lib/systemd/systemd-timesyncd -...</programlisting> - </para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>hwclock</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>date</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>localtime</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-timedated.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-timesyncd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-firstboot</refentrytitle><manvolnum>1</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/timesyncd.conf.xml b/man/timesyncd.conf.xml deleted file mode 100644 index 8c86fd0074..0000000000 --- a/man/timesyncd.conf.xml +++ /dev/null @@ -1,112 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Lennart Poettering - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="timesyncd.conf" conditional='ENABLE_TIMESYNCD' - xmlns:xi="http://www.w3.org/2001/XInclude"> - <refentryinfo> - <title>timesyncd.conf</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Lennart</firstname> - <surname>Poettering</surname> - <email>lennart@poettering.net</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>timesyncd.conf</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>timesyncd.conf</refname> - <refname>timesyncd.conf.d</refname> - <refpurpose>Network Time Synchronization configuration files</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/systemd/timesyncd.conf</filename></para> - <para><filename>/etc/systemd/timesyncd.conf.d/*.conf</filename></para> - <para><filename>/run/systemd/timesyncd.conf.d/*.conf</filename></para> - <para><filename>/usr/lib/systemd/timesyncd.conf.d/*.conf</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para>These configuration files control NTP network time - synchronization.</para> - - </refsect1> - - <xi:include href="standard-conf.xml" xpointer="main-conf" /> - - <refsect1> - <title>Options</title> - - <para>The following settings are configured in the <literal>[Time]</literal> section:</para> - - <variablelist class='network-directives'> - - <varlistentry> - <term><varname>NTP=</varname></term> - <listitem><para>A space-separated list of NTP server host - names or IP addresses. During runtime this list is combined - with any per-interface NTP servers acquired from - <citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>. - systemd-timesyncd will contact all configured system or - per-interface servers in turn until one is found that - responds. This setting defaults to an empty - list.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>FallbackNTP=</varname></term> - <listitem><para>A space-separated list of NTP server host - names or IP addresses to be used as the fallback NTP servers. - Any per-interface NTP servers obtained from - <citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - take precedence over this setting, as do any servers set via - <varname>NTP=</varname> above. This setting is hence only used - if no other NTP server information is known. If this option is - not given, a compiled-in list of NTP servers is used - instead.</para></listitem> - </varlistentry> - - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-timesyncd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-networkd.service</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/tmpfiles.d.xml b/man/tmpfiles.d.xml deleted file mode 100644 index 957475d2bd..0000000000 --- a/man/tmpfiles.d.xml +++ /dev/null @@ -1,703 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> -<!-- - This file is part of systemd. - - Copyright 2010 Brandon Philips - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> -<refentry id="tmpfiles.d"> - - <refentryinfo> - <title>tmpfiles.d</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Documentation</contrib> - <firstname>Brandon</firstname> - <surname>Philips</surname> - <email>brandon@ifup.org</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>tmpfiles.d</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>tmpfiles.d</refname> - <refpurpose>Configuration for creation, deletion and cleaning of - volatile and temporary files</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/tmpfiles.d/*.conf</filename></para> - <para><filename>/run/tmpfiles.d/*.conf</filename></para> - <para><filename>/usr/lib/tmpfiles.d/*.conf</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><command>systemd-tmpfiles</command> uses the configuration - files from the above directories to describe the creation, - cleaning and removal of volatile and temporary files and - directories which usually reside in directories such as - <filename>/run</filename> or <filename>/tmp</filename>.</para> - - <para>Volatile and temporary files and directories are those - located in <filename>/run</filename> (and its alias - <filename>/var/run</filename>), <filename>/tmp</filename>, - <filename>/var/tmp</filename>, the API file systems such as - <filename>/sys</filename> or <filename>/proc</filename>, as well - as some other directories below <filename>/var</filename>.</para> - - <para>System daemons frequently require private runtime - directories below <filename>/run</filename> to place communication - sockets and similar in. For these, consider declaring them in - their unit files using <varname>RuntimeDirectory=</varname> (see - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for details), if this is feasible.</para> - </refsect1> - - <refsect1> - <title>Configuration Format</title> - - <para>Each configuration file shall be named in the style of - <filename><replaceable>package</replaceable>.conf</filename> or - <filename><replaceable>package</replaceable>-<replaceable>part</replaceable>.conf</filename>. - The second variant should be used when it is desirable to make it - easy to override just this part of configuration.</para> - - <para>Files in <filename>/etc/tmpfiles.d</filename> override files - with the same name in <filename>/usr/lib/tmpfiles.d</filename> and - <filename>/run/tmpfiles.d</filename>. Files in - <filename>/run/tmpfiles.d</filename> override files with the same - name in <filename>/usr/lib/tmpfiles.d</filename>. Packages should - install their configuration files in - <filename>/usr/lib/tmpfiles.d</filename>. Files in - <filename>/etc/tmpfiles.d</filename> are reserved for the local - administrator, who may use this logic to override the - configuration files installed by vendor packages. All - configuration files are sorted by their filename in lexicographic - order, regardless of which of the directories they reside in. If - multiple files specify the same path, the entry in the file with - the lexicographically earliest name will be applied. All other - conflicting entries will be logged as errors. When two lines are - prefix and suffix of each other, then the prefix is always - processed first, the suffix later. Lines that take globs are - applied after those accepting no globs. If multiple operations - shall be applied on the same file, (such as ACL, xattr, file - attribute adjustments), these are always done in the same fixed - order. Otherwise, the files/directories are processed in the order - they are listed.</para> - - <para>If the administrator wants to disable a configuration file - supplied by the vendor, the recommended way is to place a symlink - to <filename>/dev/null</filename> in - <filename>/etc/tmpfiles.d/</filename> bearing the same filename. - </para> - - <para>The configuration format is one line per path containing - type, path, mode, ownership, age, and argument fields:</para> - - <programlisting>#Type Path Mode UID GID Age Argument - d /run/user 0755 root root 10d - - L /tmp/foobar - - - - /dev/null</programlisting> - - <para>Fields may be enclosed within quotes and contain C-style escapes.</para> - - <refsect2> - <title>Type</title> - - <para>The type consists of a single letter and optionally an - exclamation mark.</para> - - <para>The following line types are understood:</para> - - <variablelist> - <varlistentry> - <term><varname>f</varname></term> - <listitem><para>Create a file if it does not exist yet. If - the argument parameter is given, it will be written to the - file. Does not follow symlinks.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>F</varname></term> - <listitem><para>Create or truncate a file. If the argument - parameter is given, it will be written to the file. Does not follow symlinks.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>w</varname></term> - <listitem><para>Write the argument parameter to a file, if - the file exists. Lines of this type accept shell-style - globs in place of normal path names. The argument parameter - will be written without a trailing newline. C-style - backslash escapes are interpreted. Follows - symlinks.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>d</varname></term> - <listitem><para>Create a directory. The mode and ownership will be adjusted if - specified and the directory already exists. Contents of this directory are subject - to time based cleanup if the time argument is specified.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>D</varname></term> - <listitem><para>Similar to <varname>d</varname>, but in addition the contents - of the directory will be removed when <option>--remove</option> is used. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>e</varname></term> - <listitem><para>Similar to <varname>d</varname>, but the directory will not be - created if it does not exist. Lines of this type accept shell-style globs in - place of normal path names.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>v</varname></term> - <listitem><para>Create a subvolume if the path does not - exist yet, the file system supports subvolumes (btrfs), and - the system itself is installed into a subvolume - (specifically: the root directory <filename>/</filename> is - itself a subvolume). Otherwise, create a normal directory, in - the same way as <varname>d</varname>. A subvolume created - with this line type is not assigned to any higher-level - quota group. For that, use <varname>q</varname> or - <varname>Q</varname>, which allow creating simple quota - group hierarchies, see below.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>q</varname></term> - <listitem><para>Similar to <varname>v</varname>. However, - makes sure that the subvolume will be assigned to the same - higher-level quota groups as the subvolume it has been - created in. This ensures that higher-level limits and - accounting applied to the parent subvolume also include the - specified subvolume. On non-btrfs file systems, this line - type is identical to <varname>d</varname>. If the subvolume - already exists and is already assigned to one or more higher - level quota groups, no change to the quota hierarchy is - made. Also see <varname>Q</varname> below. See <citerefentry - project='die-net'><refentrytitle>btrfs-qgroup</refentrytitle><manvolnum>8</manvolnum></citerefentry> - for details about the btrfs quota group - concept.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Q</varname></term> - <listitem><para>Similar to <varname>q</varname>. However, - instead of copying the higher-level quota group assignments - from the parent as-is, the lowest quota group of the parent - subvolume is determined that is not the leaf quota - group. Then, an "intermediary" quota group is inserted that - is one level below this level, and shares the same ID part - as the specified subvolume. If no higher-level quota group - exists for the parent subvolume, a new quota group at level - 255 sharing the same ID as the specified subvolume is - inserted instead. This new intermediary quota group is then - assigned to the parent subvolume's higher-level quota - groups, and the specified subvolume's leaf quota group is - assigned to it.</para> - - <para>Effectively, this has a similar effect as - <varname>q</varname>, however introduces a new higher-level - quota group for the specified subvolume that may be used to - enforce limits and accounting to the specified subvolume and - children subvolume created within it. Thus, by creating - subvolumes only via <varname>q</varname> and - <varname>Q</varname>, a concept of "subtree quotas" is - implemented. Each subvolume for which <varname>Q</varname> - is set will get a "subtree" quota group created, and all - child subvolumes created within it will be assigned to - it. Each subvolume for which <varname>q</varname> is set - will not get such a "subtree" quota group, but it is ensured - that they are added to the same "subtree" quota group as their - immediate parents.</para> - - <para>It is recommended to use - <varname>Q</varname> for subvolumes that typically contain - further subvolumes, and where it is desirable to have - accounting and quota limits on all child subvolumes - together. Examples for <varname>Q</varname> are typically - <filename>/home</filename> or - <filename>/var/lib/machines</filename>. In contrast, - <varname>q</varname> should be used for subvolumes that - either usually do not include further subvolumes or where no - accounting and quota limits are needed that apply to all - child subvolumes together. Examples for <varname>q</varname> - are typically <filename>/var</filename> or - <filename>/var/tmp</filename>. As with <varname>Q</varname>, - <varname>q</varname> has no effect on the quota group - hierarchy if the subvolume exists and already has at least - one higher-level quota group assigned.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>p</varname></term> - <term><varname>p+</varname></term> - <listitem><para>Create a named pipe (FIFO) if it does not - exist yet. If suffixed with <varname>+</varname> and a file - already exists where the pipe is to be created, it will be - removed and be replaced by the pipe.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>L</varname></term> - <term><varname>L+</varname></term> - <listitem><para>Create a symlink if it does not exist - yet. If suffixed with <varname>+</varname> and a file - already exists where the symlink is to be created, it will - be removed and be replaced by the symlink. If the argument - is omitted, symlinks to files with the same name residing in - the directory <filename>/usr/share/factory/</filename> are - created. Note that permissions and ownership on symlinks - are ignored.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>c</varname></term> - <term><varname>c+</varname></term> - <listitem><para>Create a character device node if it does - not exist yet. If suffixed with <varname>+</varname> and a - file already exists where the device node is to be created, - it will be removed and be replaced by the device node. It is - recommended to suffix this entry with an exclamation mark to - only create static device nodes at boot, as udev will not - manage static device nodes that are created at runtime. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>b</varname></term> - <term><varname>b+</varname></term> - <listitem><para>Create a block device node if it does not - exist yet. If suffixed with <varname>+</varname> and a file - already exists where the device node is to be created, it - will be removed and be replaced by the device node. It is - recommended to suffix this entry with an exclamation mark to - only create static device nodes at boot, as udev will not - manage static device nodes that are created at runtime. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>C</varname></term> - <listitem><para>Recursively copy a file or directory, if the - destination files or directories do not exist yet. Note that - this command will not descend into subdirectories if the - destination directory already exists. Instead, the entire - copy operation is skipped. If the argument is omitted, files - from the source directory - <filename>/usr/share/factory/</filename> with the same name - are copied. Does not follow symlinks.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>x</varname></term> - <listitem><para>Ignore a path during cleaning. Use this type - to exclude paths from clean-up as controlled with the Age - parameter. Note that lines of this type do not influence the - effect of <varname>r</varname> or <varname>R</varname> - lines. Lines of this type accept shell-style globs in place - of normal path names. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>X</varname></term> - <listitem><para>Ignore a path during cleaning. Use this type - to exclude paths from clean-up as controlled with the Age - parameter. Unlike <varname>x</varname>, this parameter will - not exclude the content if path is a directory, but only - directory itself. Note that lines of this type do not - influence the effect of <varname>r</varname> or - <varname>R</varname> lines. Lines of this type accept - shell-style globs in place of normal path names. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>r</varname></term> - <listitem><para>Remove a file or directory if it exists. - This may not be used to remove non-empty directories, use - <varname>R</varname> for that. Lines of this type accept - shell-style globs in place of normal path - names. Does not follow symlinks.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>R</varname></term> - <listitem><para>Recursively remove a path and all its - subdirectories (if it is a directory). Lines of this type - accept shell-style globs in place of normal path - names. Does not follow symlinks.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>z</varname></term> - <listitem><para>Adjust the access mode, group and user, and - restore the SELinux security context of a file or directory, - if it exists. Lines of this type accept shell-style globs in - place of normal path names. Does not follow symlinks.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>Z</varname></term> - <listitem><para>Recursively set the access mode, group and - user, and restore the SELinux security context of a file or - directory if it exists, as well as of its subdirectories and - the files contained therein (if applicable). Lines of this - type accept shell-style globs in place of normal path - names. Does not follow symlinks. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>t</varname></term> - <listitem><para>Set extended attributes. Lines of this type - accept shell-style globs in place of normal path names. - This can be useful for setting SMACK labels. Does not follow - symlinks.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>T</varname></term> - <listitem><para>Recursively set extended attributes. Lines - of this type accept shell-style globs in place of normal - path names. This can be useful for setting SMACK - labels. Does not follow symlinks. </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>h</varname></term> - <listitem><para>Set file/directory attributes. Lines of this type - accept shell-style globs in place of normal path names.</para> - - <para>The format of the argument field is - <varname>[+-=][aAcCdDeijsStTu] </varname>. The prefix - <varname>+</varname> (the default one) causes the - attribute(s) to be added; <varname>-</varname> causes the - attribute(s) to be removed; <varname>=</varname> causes the - attributes to be set exactly as the following letters. The - letters <literal>aAcCdDeijsStTu</literal> select the new - attributes for the files, see - <citerefentry project='man-pages'><refentrytitle>chattr</refentrytitle> - <manvolnum>1</manvolnum></citerefentry> for further information. - </para> - <para>Passing only <varname>=</varname> as argument resets - all the file attributes listed above. It has to be pointed - out that the <varname>=</varname> prefix limits itself to - the attributes corresponding to the letters listed here. All - other attributes will be left untouched. Does not follow - symlinks.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>H</varname></term> - <listitem><para>Recursively set file/directory attributes. Lines - of this type accept shell-style globs in place of normal - path names. Does not follow symlinks. - </para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>a</varname></term> - <term><varname>a+</varname></term> - <listitem><para>Set POSIX ACLs (access control lists). If - suffixed with <varname>+</varname>, the specified entries will - be added to the existing set. - <command>systemd-tmpfiles</command> will automatically add - the required base entries for user and group based on the - access mode of the file, unless base entries already exist - or are explicitly specified. The mask will be added if not - specified explicitly or already present. Lines of this type - accept shell-style globs in place of normal path names. This - can be useful for allowing additional access to certain - files. Does not follow symlinks.</para></listitem> - </varlistentry> - - <varlistentry> - <term><varname>A</varname></term> - <term><varname>A+</varname></term> - <listitem><para>Same as <varname>a</varname> and - <varname>a+</varname>, but recursive. Does not follow - symlinks.</para></listitem> - </varlistentry> - </variablelist> - - <para>If the exclamation mark is used, this line is only safe of - execute during boot, and can break a running system. Lines - without the exclamation mark are presumed to be safe to execute - at any time, e.g. on package upgrades. - <command>systemd-tmpfiles</command> will execute line with an - exclamation mark only if option <option>--boot</option> is - given.</para> - - <para>For example: - <programlisting># Make sure these are created by default so that nobody else can - d /tmp/.X11-unix 1777 root root 10d - - # Unlink the X11 lock files - r! /tmp/.X[0-9]*-lock</programlisting> - The second line in contrast to the first one would break a - running system, and will only be executed with - <option>--boot</option>.</para> - </refsect2> - - <refsect2> - <title>Path</title> - - <para>The file system path specification supports simple - specifier expansion. The following expansions are - understood:</para> - - <table> - <title>Specifiers available</title> - <tgroup cols='3' align='left' colsep='1' rowsep='1'> - <colspec colname="spec" /> - <colspec colname="mean" /> - <colspec colname="detail" /> - <thead> - <row> - <entry>Specifier</entry> - <entry>Meaning</entry> - <entry>Details</entry> - </row> - </thead> - <tbody> - <row> - <entry><literal>%m</literal></entry> - <entry>Machine ID</entry> - <entry>The machine ID of the running system, formatted as string. See <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry> for more information.</entry> - </row> - <row> - <entry><literal>%b</literal></entry> - <entry>Boot ID</entry> - <entry>The boot ID of the running system, formatted as string. See <citerefentry><refentrytitle>random</refentrytitle><manvolnum>4</manvolnum></citerefentry> for more information.</entry> - </row> - <row> - <entry><literal>%H</literal></entry> - <entry>Host name</entry> - <entry>The hostname of the running system.</entry> - </row> - <row> - <entry><literal>%v</literal></entry> - <entry>Kernel release</entry> - <entry>Identical to <command>uname -r</command> output.</entry> - </row> - <row> - <entry><literal>%%</literal></entry> - <entry>Escaped %</entry> - <entry>Single percent sign.</entry> - </row> - </tbody> - </tgroup> - </table> - </refsect2> - - <refsect2> - <title>Mode</title> - - <para>The file access mode to use when creating this file or - directory. If omitted or when set to <literal>-</literal>, the - default is used: 0755 for directories, 0644 for all other file - objects. For <varname>z</varname>, <varname>Z</varname> lines, - if omitted or when set to <literal>-</literal>, the file access - mode will not be modified. This parameter is ignored for - <varname>x</varname>, <varname>r</varname>, - <varname>R</varname>, <varname>L</varname>, <varname>t</varname>, - and <varname>a</varname> lines.</para> - - <para>Optionally, if prefixed with <literal>~</literal>, the - access mode is masked based on the already set access bits for - existing file or directories: if the existing file has all - executable bits unset, all executable bits are removed from the - new access mode, too. Similarly, if all read bits are removed - from the old access mode, they will be removed from the new - access mode too, and if all write bits are removed, they will be - removed from the new access mode too. In addition, the - sticky/SUID/SGID bit is removed unless applied to a - directory. This functionality is particularly useful in - conjunction with <varname>Z</varname>.</para> - </refsect2> - - <refsect2> - <title>UID, GID</title> - - <para>The user and group to use for this file or directory. This - may either be a numeric user/group ID or a user or group - name. If omitted or when set to <literal>-</literal>, the - default 0 (root) is used. For <varname>z</varname> and - <varname>Z</varname> lines, when omitted or when set to - <literal>-</literal>, the file ownership will not be - modified. These parameters are ignored for <varname>x</varname>, - <varname>r</varname>, <varname>R</varname>, - <varname>L</varname>, <varname>t</varname>, and - <varname>a</varname> lines.</para> - </refsect2> - - <refsect2> - <title>Age</title> - <para>The date field, when set, is used to decide what files to - delete when cleaning. If a file or directory is older than the - current time minus the age field, it is deleted. The field - format is a series of integers each followed by one of the - following suffixes for the respective time units: - <constant>s</constant>, - <constant>m</constant> or <constant>min</constant>, - <constant>h</constant>, - <constant>d</constant>, - <constant>w</constant>, - <constant>ms</constant>, and - <constant>us</constant>, - meaning seconds, minutes, hours, days, weeks, - milliseconds, and microseconds, respectively. Full names of the time units can - be used too. - </para> - - <para>If multiple integers and units are specified, the time - values are summed. If an integer is given without a unit, - <constant>s</constant> is assumed. - </para> - - <para>When the age is set to zero, the files are cleaned - unconditionally.</para> - - <para>The age field only applies to lines starting with - <varname>d</varname>, <varname>D</varname>, <varname>e</varname>, - <varname>v</varname>, <varname>q</varname>, - <varname>Q</varname>, <varname>C</varname>, <varname>x</varname> - and <varname>X</varname>. If omitted or set to - <literal>-</literal>, no automatic clean-up is done.</para> - - <para>If the age field starts with a tilde character - <literal>~</literal>, the clean-up is only applied to files and - directories one level inside the directory specified, but not - the files and directories immediately inside it.</para> - </refsect2> - - <refsect2> - <title>Argument</title> - - <para>For <varname>L</varname> lines determines the destination - path of the symlink. For <varname>c</varname> and - <varname>b</varname>, determines the major/minor of the device - node, with major and minor formatted as integers, separated by - <literal>:</literal>, e.g. <literal>1:3</literal>. For - <varname>f</varname>, <varname>F</varname>, and - <varname>w</varname>, the argument may be used to specify a short string that - is written to the file, suffixed by a newline. For - <varname>C</varname>, specifies the source file or - directory. For <varname>t</varname> and <varname>T</varname>, - determines extended attributes to be set. For - <varname>a</varname> and <varname>A</varname>, determines ACL - attributes to be set. For <varname>h</varname> and - <varname>H</varname>, determines the file attributes to - set. Ignored for all other lines.</para> - </refsect2> - - </refsect1> - - <refsect1> - <title>Examples</title> - <example> - <title>Create directories with specific mode and ownership</title> - <para> - <citerefentry><refentrytitle>screen</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - needs two directories created at boot with specific modes and ownership:</para> - - <programlisting># /usr/lib/tmpfiles.d/screen.conf -d /run/screens 1777 root screen 10d -d /run/uscreens 0755 root screen 10d12h -</programlisting> - - <para>Contents of <filename>/run/screens</filename> and /run/uscreens will - cleaned up after 10 and 10½ days, respectively.</para> - </example> - - <example> - <title>Create a directory with a SMACK attribute</title> - <programlisting>D /run/cups - - - - -t /run/cups - - - - security.SMACK64=printing user.attr-with-spaces="foo bar" - </programlisting> - - <para>The direcory will be owned by root and have default mode. It's contents are - not subject to time based cleanup, but will be obliterated when - <command>systemd-tmpfiles --remove</command> runs.</para> - </example> - - <example> - <title>Create a directory and prevent its contents from cleanup</title> - <para> - <citerefentry><refentrytitle>abrt</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - needs a directory created at boot with specific mode and ownership and its content - should be preserved from the automatic cleanup applied to the contents of - <filename>/var/tmp</filename>:</para> - - <programlisting># /usr/lib/tmpfiles.d/tmp.conf -d /var/tmp 1777 root root 30d -</programlisting> - - <programlisting># /usr/lib/tmpfiles.d/abrt.conf -d /var/tmp/abrt 0755 abrt abrt - -</programlisting> - </example> - - <example> - <title>Apply clean up during boot and based on time</title> - - <programlisting># /usr/lib/tmpfiles.d/dnf.conf -r! /var/cache/dnf/*/*/download_lock.pid -r! /var/cache/dnf/*/*/metadata_lock.pid -r! /var/lib/dnf/rpmdb_lock.pid -e /var/chache/dnf/ - - - 30d -</programlisting> - - <para>The lock files will be removed during boot. Any files and directories in - <filename>/var/chache/dnf/</filename> will be removed after they have not been - accessed in 30 days.</para> - </example> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-tmpfiles</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd-delta</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>attr</refentrytitle><manvolnum>5</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>getfattr</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>setfattr</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>setfacl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>getfacl</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='man-pages'><refentrytitle>chattr</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>btrfs-subvolume</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry project='die-net'><refentrytitle>btrfs-qgroup</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> - -</refentry> diff --git a/man/udev.conf.xml b/man/udev.conf.xml deleted file mode 100644 index e104e53f5d..0000000000 --- a/man/udev.conf.xml +++ /dev/null @@ -1,94 +0,0 @@ -<?xml version='1.0'?> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<!-- - This file is part of systemd. - - Copyright 2014 Zbigniew Jędrzejewski-Szmek - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="udev.conf" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>udev.conf</title> - <productname>systemd</productname> - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Kay</firstname> - <surname>Sievers</surname> - <email>kay@vrfy.org</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>udev.conf</refentrytitle> - <manvolnum>5</manvolnum> - </refmeta> - - <refnamediv> - <refname>udev.conf</refname> - <refpurpose>Configuration for device event managing daemon</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <para><filename>/etc/udev/udev.conf</filename></para> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para> - <citerefentry><refentrytitle>systemd-udevd</refentrytitle><manvolnum>8</manvolnum></citerefentry> - expects its main configuration file at - <filename>/etc/udev/udev.conf</filename>. It consists of a set - of variables allowing the user to override default udev - values. All empty lines or lines beginning with '#' are - ignored. The following variables can be set: - </para> - - <variablelist> - <varlistentry> - <term><varname>udev_log</varname></term> - - <listitem> - <para>The log level. Valid values are the numerical - syslog priorities or their textual representations: - <option>err</option>, <option>info</option> and - <option>debug</option>.</para> - </listitem> - </varlistentry> - </variablelist> - - <para> - In addition, <filename>systemd-udevd</filename> can be configured - by command line options and the kernel command line (see - <citerefentry><refentrytitle>systemd-udevd</refentrytitle><manvolnum>8</manvolnum></citerefentry>). - </para> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry><refentrytitle>systemd-udevd</refentrytitle><manvolnum>8</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev</refentrytitle><manvolnum>7</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udevadm</refentrytitle><manvolnum>8</manvolnum></citerefentry> - </para> - </refsect1> -</refentry> diff --git a/man/udev.xml b/man/udev.xml deleted file mode 100644 index dd5563605c..0000000000 --- a/man/udev.xml +++ /dev/null @@ -1,755 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<refentry id="udev"> - <refentryinfo> - <title>udev</title> - <productname>systemd</productname> - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Greg</firstname> - <surname>Kroah-Hartmann</surname> - <email>greg@kroah.com</email> - </author> - <author> - <contrib>Developer</contrib> - <firstname>Kay</firstname> - <surname>Sievers</surname> - <email>kay@vrfy.org</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>udev</refentrytitle> - <manvolnum>7</manvolnum> - </refmeta> - - <refnamediv> - <refname>udev</refname> - <refpurpose>Dynamic device management</refpurpose> - </refnamediv> - - <refsect1><title>Description</title> - <para>udev supplies the system software with device events, manages permissions - of device nodes and may create additional symlinks in the <filename>/dev</filename> - directory, or renames network interfaces. The kernel usually just assigns unpredictable - device names based on the order of discovery. Meaningful symlinks or network device - names provide a way to reliably identify devices based on their properties or - current configuration.</para> - - <para>The udev daemon, <citerefentry><refentrytitle>systemd-udevd.service</refentrytitle> - <manvolnum>8</manvolnum></citerefentry>, receives device uevents directly from - the kernel whenever a device is added or removed from the system, or it changes its - state. When udev receives a device event, it matches its configured set of rules - against various device attributes to identify the device. Rules that match may - provide additional device information to be stored in the udev database or - to be used to create meaningful symlink names.</para> - - <para>All device information udev processes is stored in the udev database and - sent out to possible event subscribers. Access to all stored data and the event - sources is provided by the library libudev.</para> - </refsect1> - - <refsect1><title>Rules Files</title> - <para>The udev rules are read from the files located in the - system rules directory <filename>/usr/lib/udev/rules.d</filename>, - the volatile runtime directory <filename>/run/udev/rules.d</filename> - and the local administration directory <filename>/etc/udev/rules.d</filename>. - All rules files are collectively sorted and processed in lexical order, - regardless of the directories in which they live. However, files with - identical filenames replace each other. Files in <filename>/etc</filename> - have the highest priority, files in <filename>/run</filename> take precedence - over files with the same name in <filename>/usr/lib</filename>. This can be - used to override a system-supplied rules file with a local file if needed; - a symlink in <filename>/etc</filename> with the same name as a rules file in - <filename>/usr/lib</filename>, pointing to <filename>/dev/null</filename>, - disables the rules file entirely. Rule files must have the extension - <filename>.rules</filename>; other extensions are ignored.</para> - - <para>Every line in the rules file contains at least one key-value pair. - Except for empty lines or lines beginning with <literal>#</literal>, which are ignored. - There are two kinds of keys: match and assignment. - If all match keys match against their values, the rule gets applied and the - assignment keys get the specified values assigned.</para> - - <para>A matching rule may rename a network interface, add symlinks - pointing to the device node, or run a specified program as part of - the event handling.</para> - - <para>A rule consists of a comma-separated list of one or more key-value pairs. - Each key has a distinct operation, depending on the used operator. Valid - operators are:</para> - <variablelist> - <varlistentry> - <term><literal>==</literal></term> - <listitem> - <para>Compare for equality.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><literal>!=</literal></term> - <listitem> - <para>Compare for inequality.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><literal>=</literal></term> - <listitem> - <para>Assign a value to a key. Keys that represent a list are reset - and only this single value is assigned.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><literal>+=</literal></term> - <listitem> - <para>Add the value to a key that holds a list of entries.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><literal>-=</literal></term> - <listitem> - <para>Remove the value from a key that holds a list of entries.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><literal>:=</literal></term> - <listitem> - <para>Assign a value to a key finally; disallow any later changes.</para> - </listitem> - </varlistentry> - </variablelist> - - <para>The following key names can be used to match against device properties. - Some of the keys also match against properties of the parent devices in sysfs, - not only the device that has generated the event. If multiple keys that match - a parent device are specified in a single rule, all these keys must match at - one and the same parent device.</para> - <variablelist class='udev-directives'> - <varlistentry> - <term><varname>ACTION</varname></term> - <listitem> - <para>Match the name of the event action.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>DEVPATH</varname></term> - <listitem> - <para>Match the devpath of the event device.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>KERNEL</varname></term> - <listitem> - <para>Match the name of the event device.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>NAME</varname></term> - <listitem> - <para>Match the name of a network interface. It can be used once the - NAME key has been set in one of the preceding rules.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>SYMLINK</varname></term> - <listitem> - <para>Match the name of a symlink targeting the node. It can - be used once a SYMLINK key has been set in one of the preceding - rules. There may be multiple symlinks; only one needs to match. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>SUBSYSTEM</varname></term> - <listitem> - <para>Match the subsystem of the event device.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>DRIVER</varname></term> - <listitem> - <para>Match the driver name of the event device. Only set this key for devices - which are bound to a driver at the time the event is generated.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><varname>ATTR{<replaceable>filename</replaceable>}</varname></term> - <listitem> - <para>Match sysfs attribute values of the event device. Trailing - whitespace in the attribute values is ignored unless the specified match - value itself contains trailing whitespace. - </para> - </listitem> - <term><varname>SYSCTL{<replaceable>kernel parameter</replaceable>}</varname></term> - <listitem> - <para>Match a kernel parameter value. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>KERNELS</varname></term> - <listitem> - <para>Search the devpath upwards for a matching device name.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>SUBSYSTEMS</varname></term> - <listitem> - <para>Search the devpath upwards for a matching device subsystem name.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>DRIVERS</varname></term> - <listitem> - <para>Search the devpath upwards for a matching device driver name.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>ATTRS{<replaceable>filename</replaceable>}</varname></term> - <listitem> - <para>Search the devpath upwards for a device with matching sysfs attribute values. - If multiple <varname>ATTRS</varname> matches are specified, all of them - must match on the same device. Trailing whitespace in the attribute values is ignored - unless the specified match value itself contains trailing whitespace.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>TAGS</varname></term> - <listitem> - <para>Search the devpath upwards for a device with matching tag.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>ENV{<replaceable>key</replaceable>}</varname></term> - <listitem> - <para>Match against a device property value.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>TAG</varname></term> - <listitem> - <para>Match against a device tag.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>TEST{<replaceable>octal mode mask</replaceable>}</varname></term> - <listitem> - <para>Test the existence of a file. An octal mode mask can be specified - if needed.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>PROGRAM</varname></term> - <listitem> - <para>Execute a program to determine whether there - is a match; the key is true if the program returns - successfully. The device properties are made available to the - executed program in the environment. The program's standard output - is available in the <varname>RESULT</varname> key.</para> - <para>This can only be used for very short-running foreground tasks. For details, - see <varname>RUN</varname>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>RESULT</varname></term> - <listitem> - <para>Match the returned string of the last <varname>PROGRAM</varname> call. - This key can be used in the same or in any later rule after a - <varname>PROGRAM</varname> call.</para> - </listitem> - </varlistentry> - </variablelist> - - <para>Most of the fields support shell glob pattern matching and - alternate patterns. The following special characters are supported:</para> - <variablelist> - <varlistentry> - <term><literal>*</literal></term> - <listitem> - <para>Matches zero or more characters.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>?</literal></term> - <listitem> - <para>Matches any single character.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>[]</literal></term> - <listitem> - <para>Matches any single character specified within the brackets. For - example, the pattern string <literal>tty[SR]</literal> - would match either <literal>ttyS</literal> or <literal>ttyR</literal>. - Ranges are also supported via the <literal>-</literal> character. - For example, to match on the range of all digits, the pattern - <literal>[0-9]</literal> could be used. If the first character - following the <literal>[</literal> is a <literal>!</literal>, - any characters not enclosed are matched.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>|</literal></term> - <listitem> - <para>Separates alternative patterns. For example, the pattern string - <literal>abc|x*</literal> would match either <literal>abc</literal> - or <literal>x*</literal>.</para> - </listitem> - </varlistentry> - </variablelist> - - <para>The following keys can get values assigned:</para> - <variablelist class='udev-directives'> - <varlistentry> - <term><varname>NAME</varname></term> - <listitem> - <para>The name to use for a network interface. See - <citerefentry><refentrytitle>systemd.link</refentrytitle><manvolnum>5</manvolnum></citerefentry> - for a higher-level mechanism for setting the interface name. - The name of a device node cannot be changed by udev, only additional - symlinks can be created.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>SYMLINK</varname></term> - <listitem> - <para>The name of a symlink targeting the node. Every matching rule adds - this value to the list of symlinks to be created.</para> - <para>The set of characters to name a symlink is limited. Allowed - characters are <literal>0-9A-Za-z#+-.:=@_/</literal>, valid UTF-8 character - sequences, and <literal>\x00</literal> hex encoding. All other - characters are replaced by a <literal>_</literal> character.</para> - <para>Multiple symlinks may be specified by separating the names by the - space character. In case multiple devices claim the same name, the link - always points to the device with the highest link_priority. If the current - device goes away, the links are re-evaluated and the device with the - next highest link_priority becomes the owner of the link. If no - link_priority is specified, the order of the devices (and which one of - them owns the link) is undefined.</para> - <para>Symlink names must never conflict with the kernel's default device - node names, as that would result in unpredictable behavior. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>OWNER</varname>, <varname>GROUP</varname>, <varname>MODE</varname></term> - <listitem> - <para>The permissions for the device node. Every specified value overrides - the compiled-in default value.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>SECLABEL{<replaceable>module</replaceable>}</varname></term> - <listitem> - <para>Applies the specified Linux Security Module label to the device node.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>ATTR{<replaceable>key</replaceable>}</varname></term> - <listitem> - <para>The value that should be written to a sysfs attribute of the - event device.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>SYSCTL{<replaceable>kernel parameter</replaceable>}</varname></term> - <listitem> - <para>The value that should be written to kernel parameter.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>ENV{<replaceable>key</replaceable>}</varname></term> - <listitem> - <para>Set a device property value. Property names with a leading <literal>.</literal> - are neither stored in the database nor exported to events or - external tools (run by, for example, the <varname>PROGRAM</varname> - match key).</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>TAG</varname></term> - <listitem> - <para>Attach a tag to a device. This is used to filter events for users - of libudev's monitor functionality, or to enumerate a group of tagged - devices. The implementation can only work efficiently if only a few - tags are attached to a device. It is only meant to be used in - contexts with specific device filter requirements, and not as a - general-purpose flag. Excessive use might result in inefficient event - handling.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>RUN{<replaceable>type</replaceable>}</varname></term> - <listitem> - <para>Add a program to the list of programs to be executed after - processing all the rules for a specific event, depending on - <literal>type</literal>:</para> - <variablelist> - <varlistentry> - <term><literal>program</literal></term> - <listitem> - <para>Execute an external program specified as the assigned - value. If no absolute path is given, the program is expected - to live in <filename>/usr/lib/udev</filename>; otherwise, the - absolute path must be specified.</para> - <para>This is the default if no <replaceable>type</replaceable> - is specified.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>builtin</literal></term> - <listitem> - <para>As <varname>program</varname>, but use one of the - built-in programs rather than an external one.</para> - </listitem> - </varlistentry> - </variablelist> - <para>The program name and following arguments are separated by spaces. - Single quotes can be used to specify arguments with spaces.</para> - <para>This can only be used for very short-running foreground tasks. Running an - event process for a long period of time may block all further events for - this or a dependent device.</para> - <para>Starting daemons or other long-running processes is not appropriate - for udev; the forked processes, detached or not, will be unconditionally - killed after the event handling has finished.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>LABEL</varname></term> - <listitem> - <para>A named label to which a <varname>GOTO</varname> may jump.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>GOTO</varname></term> - <listitem> - <para>Jumps to the next <varname>LABEL</varname> with a matching name.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>IMPORT{<replaceable>type</replaceable>}</varname></term> - <listitem> - <para>Import a set of variables as device properties, - depending on <literal>type</literal>:</para> - <variablelist> - <varlistentry> - <term><literal>program</literal></term> - <listitem> - <para>Execute an external program specified as the assigned - value and, if it returns successfully, - import its output, which must be in environment key - format. Path specification, command/argument separation, - and quoting work like in <varname>RUN</varname>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>builtin</literal></term> - <listitem> - <para>Similar to <literal>program</literal>, but use one of the - built-in programs rather than an external one.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>file</literal></term> - <listitem> - <para>Import a text file specified as the assigned value, the content - of which must be in environment key format.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>db</literal></term> - <listitem> - <para>Import a single property specified as the assigned value from the - current device database. This works only if the database is already populated - by an earlier event.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>cmdline</literal></term> - <listitem> - <para>Import a single property from the kernel command line. For simple flags - the value of the property is set to <literal>1</literal>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><literal>parent</literal></term> - <listitem> - <para>Import the stored keys from the parent device by reading - the database entry of the parent device. The value assigned to - <option>IMPORT{parent}</option> is used as a filter of key names - to import (with the same shell glob pattern matching used for - comparisons).</para> - </listitem> - </varlistentry> - </variablelist> - <para>This can only be used for very short-running foreground tasks. For details - see <option>RUN</option>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><varname>OPTIONS</varname></term> - <listitem> - <para>Rule and device options:</para> - <variablelist class='udev-directives'> - <varlistentry> - <term><option>link_priority=<replaceable>value</replaceable></option></term> - <listitem> - <para>Specify the priority of the created symlinks. Devices with higher - priorities overwrite existing symlinks of other devices. The default is 0.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>string_escape=<replaceable>none|replace</replaceable></option></term> - <listitem> - <para>Usually, control and other possibly unsafe characters are replaced - in strings used for device naming. The mode of replacement can be specified - with this option.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>static_node=</option></term> - <listitem> - <para>Apply the permissions specified in this rule to the - static device node with the specified name. Also, for every - tag specified in this rule, create a symlink - in the directory - <filename>/run/udev/static_node-tags/<replaceable>tag</replaceable></filename> - pointing at the static device node with the specified name. - Static device node creation is performed by systemd-tmpfiles - before systemd-udevd is started. The static nodes might not - have a corresponding kernel device; they are used to trigger - automatic kernel module loading when they are accessed.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>watch</option></term> - <listitem> - <para>Watch the device node with inotify; when the node is - closed after being opened for writing, a change uevent is - synthesized.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>nowatch</option></term> - <listitem> - <para>Disable the watching of a device node with inotify.</para> - </listitem> - </varlistentry> - </variablelist> - </listitem> - </varlistentry> - </variablelist> - - <para>The <varname>NAME</varname>, <varname>SYMLINK</varname>, - <varname>PROGRAM</varname>, <varname>OWNER</varname>, - <varname>GROUP</varname>, <varname>MODE</varname>, and - <varname>RUN</varname> fields support simple string substitutions. - The <varname>RUN</varname> substitutions are performed after all rules - have been processed, right before the program is executed, allowing for - the use of device properties set by earlier matching rules. For all other - fields, substitutions are performed while the individual rule is being - processed. The available substitutions are:</para> - <variablelist class='udev-directives'> - <varlistentry> - <term><option>$kernel</option>, <option>%k</option></term> - <listitem> - <para>The kernel name for this device.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>$number</option>, <option>%n</option></term> - <listitem> - <para>The kernel number for this device. For example, - <literal>sda3</literal> has kernel number <literal>3</literal>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>$devpath</option>, <option>%p</option></term> - <listitem> - <para>The devpath of the device.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>$id</option>, <option>%b</option></term> - <listitem> - <para>The name of the device matched while searching the devpath - upwards for <option>SUBSYSTEMS</option>, <option>KERNELS</option>, - <option>DRIVERS</option>, and <option>ATTRS</option>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>$driver</option></term> - <listitem> - <para>The driver name of the device matched while searching the - devpath upwards for <option>SUBSYSTEMS</option>, - <option>KERNELS</option>, <option>DRIVERS</option>, and - <option>ATTRS</option>. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>$attr{<replaceable>file</replaceable>}</option>, <option>%s{<replaceable>file</replaceable>}</option></term> - <listitem> - <para>The value of a sysfs attribute found at the device where - all keys of the rule have matched. If the matching device does not - have such an attribute, and a previous <option>KERNELS</option>, - <option>SUBSYSTEMS</option>, <option>DRIVERS</option>, or - <option>ATTRS</option> test selected a parent device, then the - attribute from that parent device is used. - </para> - <para>If the attribute is a symlink, the last element of the - symlink target is returned as the value. - </para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>$env{<replaceable>key</replaceable>}</option>, <option>%E{<replaceable>key</replaceable>}</option></term> - <listitem> - <para>A device property value.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>$major</option>, <option>%M</option></term> - <listitem> - <para>The kernel major number for the device.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>$minor</option>, <option>%m</option></term> - <listitem> - <para>The kernel minor number for the device.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>$result</option>, <option>%c</option></term> - <listitem> - <para>The string returned by the external program requested with - <varname>PROGRAM</varname>. - A single part of the string, separated by a space character, may be selected - by specifying the part number as an attribute: <literal>%c{N}</literal>. - If the number is followed by the <literal>+</literal> character, this part plus all remaining parts - of the result string are substituted: <literal>%c{N+}</literal>.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>$parent</option>, <option>%P</option></term> - <listitem> - <para>The node name of the parent device.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>$name</option></term> - <listitem> - <para>The current name of the device. If not changed by a rule, it is the - name of the kernel device.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>$links</option></term> - <listitem> - <para>A space-separated list of the current symlinks. The value is - only set during a remove event or if an earlier rule assigned a value.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>$root</option>, <option>%r</option></term> - <listitem> - <para>The udev_root value.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>$sys</option>, <option>%S</option></term> - <listitem> - <para>The sysfs mount point.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>$devnode</option>, <option>%N</option></term> - <listitem> - <para>The name of the device node.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>%%</option></term> - <listitem> - <para>The <literal>%</literal> character itself.</para> - </listitem> - </varlistentry> - - <varlistentry> - <term><option>$$</option></term> - <listitem> - <para>The <literal>$</literal> character itself.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect1> - - <refsect1> - <title>See Also</title> - <para> - <citerefentry> - <refentrytitle>systemd-udevd.service</refentrytitle><manvolnum>8</manvolnum> - </citerefentry>, - <citerefentry> - <refentrytitle>udevadm</refentrytitle><manvolnum>8</manvolnum> - </citerefentry>, - <citerefentry> - <refentrytitle>systemd.link</refentrytitle><manvolnum>5</manvolnum> - </citerefentry> - </para> - </refsect1> -</refentry> diff --git a/man/udev_device_get_syspath.xml b/man/udev_device_get_syspath.xml deleted file mode 100644 index b54749ed56..0000000000 --- a/man/udev_device_get_syspath.xml +++ /dev/null @@ -1,207 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ -<!ENTITY % entities SYSTEM "custom-entities.ent" > -%entities; -]> - -<!-- - This file is part of systemd. - - Copyright 2015 David Herrmann <dh.herrmann@gmail.com> - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="udev_device_get_syspath" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>udev_device_get_syspath</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>David</firstname> - <surname>Herrmann</surname> - <email>dh.herrmann@gmail.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>udev_device_get_syspath</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>udev_device_get_syspath</refname> - <refname>udev_device_get_sysname</refname> - <refname>udev_device_get_sysnum</refname> - <refname>udev_device_get_devpath</refname> - <refname>udev_device_get_devnode</refname> - <refname>udev_device_get_devnum</refname> - <refname>udev_device_get_devtype</refname> - <refname>udev_device_get_subsystem</refname> - <refname>udev_device_get_driver</refname> - <refname>udev_device_get_udev</refname> - <refname>udev_device_get_parent</refname> - <refname>udev_device_get_parent_with_subsystem_devtype</refname> - <refname>udev_device_get_is_initialized</refname> - <refname>udev_device_get_action</refname> - - <refpurpose>Query device properties</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <libudev.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>const char *<function>udev_device_get_syspath</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>const char *<function>udev_device_get_sysname</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>const char *<function>udev_device_get_sysnum</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>const char *<function>udev_device_get_devpath</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>const char *<function>udev_device_get_devnode</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>dev_t <function>udev_device_get_devnum</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>const char *<function>udev_device_get_devtype</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>const char *<function>udev_device_get_subsystem</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>const char *<function>udev_device_get_driver</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev *<function>udev_device_get_udev</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev_device *<function>udev_device_get_parent</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev_device *<function>udev_device_get_parent_with_subsystem_devtype</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - <paramdef>const char *<parameter>subsystem</parameter></paramdef> - <paramdef>const char *<parameter>devtype</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_device_get_is_initialized</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>const char *<function>udev_device_get_action</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <!--<refsect1> - <title>Description</title> - - <para>XXX: Add documentation.</para> - </refsect1>--> - - <refsect1> - <title>Return Value</title> - - <para>On success, <function>udev_device_get_syspath()</function>, - <function>udev_device_get_sysname()</function>, - <function>udev_device_get_sysnum()</function>, - <function>udev_device_get_devpath()</function>, - <function>udev_device_get_devnode()</function>, - <function>udev_device_get_devtype()</function>, - <function>udev_device_get_subsystem()</function>, - <function>udev_device_get_driver()</function> and - <function>udev_device_get_action()</function> return a pointer - to a constant string that describes the requested property. The - lifetime of this string is bound to the device it was requested - on. On failure, each function may return - <constant>NULL</constant>.</para> - - <para>On success, <function>udev_device_get_devnum()</function> - returns the device type of the passed device. On failure, a - device type with minor and major number set to - <constant>0</constant> is returned.</para> - - <para><function>udev_device_get_udev()</function> always returns - a valid pointer to the udev context that this device belongs - to.</para> - - <para>On success, <function>udev_device_get_parent()</function> - and - <function>udev_device_get_parent_with_subsystem_devtype()</function> - return a pointer to the parent device. No additional reference - to this device is acquired, but the child device owns a reference - to such a parent device. On failure, <constant>NULL</constant> - is returned.</para> - - <para>On success, <function>udev_device_get_is_initialized()</function> - returns either <constant>1</constant> or <constant>0</constant>, - depending on whether the passed device is initialized or not. On - failure, a negative error code is returned.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>udev_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_device_new_from_syspath</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_device_has_tag</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_enumerate_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_monitor_new_from_netlink</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_list_entry</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - </para> - </refsect1> - -</refentry> diff --git a/man/udev_device_has_tag.xml b/man/udev_device_has_tag.xml deleted file mode 100644 index 480257343c..0000000000 --- a/man/udev_device_has_tag.xml +++ /dev/null @@ -1,163 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ -<!ENTITY % entities SYSTEM "custom-entities.ent" > -%entities; -]> - -<!-- - This file is part of systemd. - - Copyright 2015 David Herrmann <dh.herrmann@gmail.com> - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="udev_device_has_tag" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>udev_device_has_tag</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>David</firstname> - <surname>Herrmann</surname> - <email>dh.herrmann@gmail.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>udev_device_has_tag</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>udev_device_has_tag</refname> - <refname>udev_device_get_devlinks_list_entry</refname> - <refname>udev_device_get_properties_list_entry</refname> - <refname>udev_device_get_tags_list_entry</refname> - <refname>udev_device_get_sysattr_list_entry</refname> - <refname>udev_device_get_property_value</refname> - <refname>udev_device_get_sysattr_value</refname> - <refname>udev_device_set_sysattr_value</refname> - - <refpurpose>Retrieve or set device attributes</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <libudev.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>struct udev_list_entry *<function>udev_device_get_devlinks_list_entry</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev_list_entry *<function>udev_device_get_properties_list_entry</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev_list_entry *<function>udev_device_get_tags_list_entry</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev_list_entry *<function>udev_device_get_sysattr_list_entry</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>const char *<function>udev_device_get_property_value</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - <paramdef>const char *<parameter>key</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_device_has_tag</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - <paramdef>const char *<parameter>tag</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>const char *<function>udev_device_get_sysattr_value</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - <paramdef>const char *<parameter>sysattr</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_device_set_sysattr_value</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - <paramdef>const char *<parameter>sysattr</parameter></paramdef> - <paramdef>const char *<parameter>value</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <!--<refsect1> - <title>Description</title> - - <para>XXX: Add short description.</para> - </refsect1>--> - - <refsect1> - <title>Return Value</title> - - <para>On success, - <function>udev_device_get_devlinks_list_entry()</function>, - <function>udev_device_get_properties_list_entry()</function>, - <function>udev_device_get_tags_list_entry()</function> and - <function>udev_device_get_sysattr_list_entry()</function> return - a pointer to the first entry of the retrieved list. If that list - is empty, or if an error occurred, <constant>NULL</constant> is - returned.</para> - - <para>On success, - <function>udev_device_get_property_value()</function> and - <function>udev_device_get_sysattr_value()</function> return a - pointer to a constant string of the requested value. On error, - <constant>NULL</constant> is returned.</para> - - <para>On success, - <function>udev_device_set_sysattr_value()</function> returns - an integer greater than, or equal to, <constant>0</constant>. - On failure, a negative error code is returned.</para> - - <para>On success, <function>udev_device_has_tag()</function> - returns <constant>1</constant> or <constant>0</constant>, - depending on whether the device has the given tag or not. - On failure, a negative error code is returned.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>udev_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_device_new_from_syspath</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_device_get_syspath</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_enumerate_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_monitor_new_from_netlink</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_list_entry</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - </para> - </refsect1> - -</refentry> diff --git a/man/udev_device_new_from_syspath.xml b/man/udev_device_new_from_syspath.xml deleted file mode 100644 index 0bb71c8e91..0000000000 --- a/man/udev_device_new_from_syspath.xml +++ /dev/null @@ -1,214 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ -<!ENTITY % entities SYSTEM "custom-entities.ent" > -%entities; -]> - -<!-- - This file is part of systemd. - - Copyright 2015 David Herrmann <dh.herrmann@gmail.com> - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="udev_device_new_from_syspath" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>udev_device_new_from_syspath</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>David</firstname> - <surname>Herrmann</surname> - <email>dh.herrmann@gmail.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>udev_device_new_from_syspath</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>udev_device_new_from_syspath</refname> - <refname>udev_device_new_from_devnum</refname> - <refname>udev_device_new_from_subsystem_sysname</refname> - <refname>udev_device_new_from_device_id</refname> - <refname>udev_device_new_from_environment</refname> - <refname>udev_device_ref</refname> - <refname>udev_device_unref</refname> - - <refpurpose>Create, acquire and release a udev device object</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <libudev.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>struct udev_device *<function>udev_device_new_from_syspath</function></funcdef> - <paramdef>struct udev *<parameter>udev</parameter></paramdef> - <paramdef>const char *<parameter>syspath</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev_device *<function>udev_device_new_from_devnum</function></funcdef> - <paramdef>struct udev *<parameter>udev</parameter></paramdef> - <paramdef>char <parameter>type</parameter></paramdef> - <paramdef>dev_t <parameter>devnum</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev_device *<function>udev_device_new_from_subsystem_sysname</function></funcdef> - <paramdef>struct udev *<parameter>udev</parameter></paramdef> - <paramdef>const char *<parameter>subsystem</parameter></paramdef> - <paramdef>const char *<parameter>sysname</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev_device *<function>udev_device_new_from_device_id</function></funcdef> - <paramdef>struct udev *<parameter>udev</parameter></paramdef> - <paramdef>const char *<parameter>id</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev_device *<function>udev_device_new_from_environment</function></funcdef> - <paramdef>struct udev *<parameter>udev</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev_device *<function>udev_device_ref</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev_device *<function>udev_device_unref</function></funcdef> - <paramdef>struct udev_device *<parameter>udev_device</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>udev_device_new_from_syspath</function>, - <function>udev_device_new_from_devnum</function>, - <function>udev_device_new_from_subsystem_sysname</function>, - <function>udev_device_new_from_device_id</function>, and - <function>udev_device_new_from_environment</function> - allocate a new udev device object and returns a pointer to it. This - object is opaque and must not be accessed by the caller via different - means than functions provided by libudev. Initially, the reference count - of the device is 1. You can acquire further references, and drop - gained references via <function>udev_device_ref()</function> and - <function>udev_device_unref()</function>. Once the reference count hits 0, - the device object is destroyed and freed.</para> - - <para><function>udev_device_new_from_syspath</function>, - <function>udev_device_new_from_devnum</function>, - <function>udev_device_new_from_subsystem_sysname</function>, and - <function>udev_device_new_from_device_id</function> - create the device object based on information found in - <filename>/sys</filename>, annotated with properties from the udev-internal - device database. A syspath is any subdirectory of <filename>/sys</filename>, - with the restriction that a subdirectory of <filename>/sys/devices</filename> - (or a symlink to one) represents a real device and as such must contain - a <filename>uevent</filename> file. <function>udev_device_new_from_devnum</function> - takes a device type, which can be <constant>b</constant> for block devices or - <constant>c</constant> for character devices, as well as a devnum (see - <citerefentry project='man-pages'><refentrytitle>makedev</refentrytitle><manvolnum>3</manvolnum></citerefentry>). - <function>udev_device_new_from_subsystem_sysname</function> looks up devices based - on the provided subsystem and sysname - (see <citerefentry><refentrytitle>udev_device_get_subsystem</refentrytitle><manvolnum>3</manvolnum></citerefentry> - and - <citerefentry><refentrytitle>udev_device_get_sysname</refentrytitle><manvolnum>3</manvolnum></citerefentry>) - and <function>udev_device_new_from_device_id</function> looks up devices based on the provided - device ID, which is a special string in one of the following four forms: - <table> - <title>Device ID strings</title> - - <tgroup cols='2'> - <colspec colname='example' /> - <colspec colname='explanation' /> - <thead><row> - <entry>Example</entry> - <entry>Explanation</entry> - </row></thead> - <tbody> - <row><entry><varname>b8:2</varname></entry> - <entry>block device major:minor</entry></row> - - <row><entry><varname>c128:1</varname></entry> - <entry>char device major:minor</entry></row> - - <row><entry><varname>n3</varname></entry> - <entry>network device ifindex</entry></row> - - <row><entry><varname>+sound:card29</varname></entry> - <entry>kernel driver core subsystem:device name</entry></row> - </tbody> - </tgroup> - </table> - </para> - - <para><function>udev_device_new_from_environment</function> - creates a device from the current environment (see - <citerefentry project='man-pages'><refentrytitle>environ</refentrytitle><manvolnum>7</manvolnum></citerefentry>). - Each key-value pair is interpreted in the same way as if it was - received in an uevent (see - <citerefentry><refentrytitle>udev_monitor_receive_device</refentrytitle><manvolnum>3</manvolnum></citerefentry>). - The keys <constant>DEVPATH</constant>, <constant>SUBSYSTEM</constant>, - <constant>ACTION</constant>, and <constant>SEQNUM</constant> are mandatory.</para> - - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, <function>udev_device_new_from_syspath()</function>, - <function>udev_device_new_from_devnum()</function>, - <function>udev_device_new_from_subsystem_sysname()</function>, - <function>udev_device_new_from_device_id()</function> and - <function>udev_device_new_from_environment()</function> return a - pointer to the allocated udev device. On failure, - <constant>NULL</constant> is returned, - and <varname>errno</varname> is set appropriately. - <function>udev_device_ref()</function> returns the argument - that it was passed, unmodified. - <function>udev_device_unref()</function> always returns - <constant>NULL</constant>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>udev_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_device_get_syspath</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_device_has_tag</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_enumerate_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_monitor_new_from_netlink</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_list_entry</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - </para> - </refsect1> - -</refentry> diff --git a/man/udev_enumerate_add_match_subsystem.xml b/man/udev_enumerate_add_match_subsystem.xml deleted file mode 100644 index 5acce00bb0..0000000000 --- a/man/udev_enumerate_add_match_subsystem.xml +++ /dev/null @@ -1,163 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ -<!ENTITY % entities SYSTEM "custom-entities.ent" > -%entities; -]> - -<!-- - This file is part of systemd. - - Copyright 2015 David Herrmann <dh.herrmann@gmail.com> - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="udev_enumerate_add_match_subsystem" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>udev_enumerate_add_match_subsystem</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>David</firstname> - <surname>Herrmann</surname> - <email>dh.herrmann@gmail.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>udev_enumerate_add_match_subsystem</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>udev_enumerate_add_match_subsystem</refname> - <refname>udev_enumerate_add_nomatch_subsystem</refname> - <refname>udev_enumerate_add_match_sysattr</refname> - <refname>udev_enumerate_add_nomatch_sysattr</refname> - <refname>udev_enumerate_add_match_property</refname> - <refname>udev_enumerate_add_match_sysname</refname> - <refname>udev_enumerate_add_match_tag</refname> - <refname>udev_enumerate_add_match_parent</refname> - <refname>udev_enumerate_add_match_is_initialized</refname> - - <refpurpose>Modify filters</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <libudev.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>udev_enumerate_add_match_subsystem</function></funcdef> - <paramdef>struct udev_enumerate *<parameter>udev_enumerate</parameter></paramdef> - <paramdef>const char *<parameter>subsystem</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_enumerate_add_nomatch_subsystem</function></funcdef> - <paramdef>struct udev_enumerate *<parameter>udev_enumerate</parameter></paramdef> - <paramdef>const char *<parameter>subsystem</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_enumerate_add_match_sysattr</function></funcdef> - <paramdef>struct udev_enumerate *<parameter>udev_enumerate</parameter></paramdef> - <paramdef>const char *<parameter>sysattr</parameter></paramdef> - <paramdef>const char *<parameter>value</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_enumerate_add_nomatch_sysattr</function></funcdef> - <paramdef>struct udev_enumerate *<parameter>udev_enumerate</parameter></paramdef> - <paramdef>const char *<parameter>sysattr</parameter></paramdef> - <paramdef>const char *<parameter>value</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_enumerate_add_match_property</function></funcdef> - <paramdef>struct udev_enumerate *<parameter>udev_enumerate</parameter></paramdef> - <paramdef>const char *<parameter>property</parameter></paramdef> - <paramdef>const char *<parameter>value</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_enumerate_add_match_sysname</function></funcdef> - <paramdef>struct udev_enumerate *<parameter>udev_enumerate</parameter></paramdef> - <paramdef>const char *<parameter>sysname</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_enumerate_add_match_tag</function></funcdef> - <paramdef>struct udev_enumerate *<parameter>udev_enumerate</parameter></paramdef> - <paramdef>const char *<parameter>tag</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_enumerate_add_match_parent</function></funcdef> - <paramdef>struct udev_enumerate *<parameter>udev_enumerate</parameter></paramdef> - <paramdef>struct udev_device *<parameter>parent</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_enumerate_add_match_is_initialized</function></funcdef> - <paramdef>struct udev_enumerate *<parameter>udev_enumerate</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <!--<refsect1> - <title>Description</title> - - <para>XXX: Add short description.</para> - </refsect1>--> - - <refsect1> - <title>Return Value</title> - - <para>On success, - <function>udev_enumerate_add_match_subsystem</function>, - <function>udev_enumerate_add_nomatch_subsystem</function>, - <function>udev_enumerate_add_match_sysattr</function>, - <function>udev_enumerate_add_nomatch_sysattr</function>, - <function>udev_enumerate_add_match_property</function>, - <function>udev_enumerate_add_match_sysname</function>, - <function>udev_enumerate_add_match_tag</function>, - <function>udev_enumerate_add_match_parent</function> and - <function>udev_enumerate_add_match_is_initialized</function> - return an integer greater than, or equal to, - <constant>0</constant>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>udev_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_device_new_from_syspath</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_enumerate_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_enumerate_scan_devices</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_monitor_new_from_netlink</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_list_entry</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - </para> - </refsect1> - -</refentry> diff --git a/man/udev_enumerate_new.xml b/man/udev_enumerate_new.xml deleted file mode 100644 index b5856c5577..0000000000 --- a/man/udev_enumerate_new.xml +++ /dev/null @@ -1,111 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ -<!ENTITY % entities SYSTEM "custom-entities.ent" > -%entities; -]> - -<!-- - This file is part of systemd. - - Copyright 2015 David Herrmann <dh.herrmann@gmail.com> - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="udev_enumerate_new" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>udev_enumerate_new</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>David</firstname> - <surname>Herrmann</surname> - <email>dh.herrmann@gmail.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>udev_enumerate_new</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>udev_enumerate_new</refname> - <refname>udev_enumerate_ref</refname> - <refname>udev_enumerate_unref</refname> - - <refpurpose>Create, acquire and release a udev enumerate object</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <libudev.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>struct udev_enumerate *<function>udev_enumerate_new</function></funcdef> - <paramdef>struct udev *<parameter>udev</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev_enumerate *<function>udev_enumerate_ref</function></funcdef> - <paramdef>struct udev_enumerate *<parameter>udev_enumerate</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev_enumerate *<function>udev_enumerate_unref</function></funcdef> - <paramdef>struct udev_enumerate *<parameter>udev_enumerate</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <!--<refsect1> - <title>Description</title> - - <para>XXX: Add short description.</para> - </refsect1>--> - - <refsect1> - <title>Return Value</title> - - <para>On success, <function>udev_enumerate_new()</function> returns a - pointer to the allocated udev monitor. On failure, - <constant>NULL</constant> is returned. - <function>udev_enumerate_ref()</function> returns the argument - that it was passed, unmodified. - <function>udev_enumerate_unref()</function> always returns - <constant>NULL</constant>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>udev_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_device_new_from_syspath</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_enumerate_add_match_subsystem</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_enumerate_scan_devices</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_monitor_new_from_netlink</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_list_entry</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - </para> - </refsect1> - -</refentry> diff --git a/man/udev_enumerate_scan_devices.xml b/man/udev_enumerate_scan_devices.xml deleted file mode 100644 index e0b6bfba32..0000000000 --- a/man/udev_enumerate_scan_devices.xml +++ /dev/null @@ -1,133 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ -<!ENTITY % entities SYSTEM "custom-entities.ent" > -%entities; -]> - -<!-- - This file is part of systemd. - - Copyright 2015 David Herrmann <dh.herrmann@gmail.com> - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="udev_enumerate_scan_devices" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>udev_enumerate_scan_devices</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>David</firstname> - <surname>Herrmann</surname> - <email>dh.herrmann@gmail.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>udev_enumerate_scan_devices</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>udev_enumerate_scan_devices</refname> - <refname>udev_enumerate_scan_subsystems</refname> - <refname>udev_enumerate_get_list_entry</refname> - <refname>udev_enumerate_add_syspath</refname> - <refname>udev_enumerate_get_udev</refname> - - <refpurpose>Query or modify a udev enumerate object</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <libudev.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>udev_enumerate_scan_devices</function></funcdef> - <paramdef>struct udev_enumerate *<parameter>udev_enumerate</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_enumerate_scan_subsystems</function></funcdef> - <paramdef>struct udev_enumerate *<parameter>udev_enumerate</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev_list_entry *<function>udev_enumerate_get_list_entry</function></funcdef> - <paramdef>struct udev_enumerate *<parameter>udev_enumerate</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_enumerate_add_syspath</function></funcdef> - <paramdef>struct udev_enumerate *<parameter>udev_enumerate</parameter></paramdef> - <paramdef>const char *<parameter>syspath</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev *<function>udev_enumerate_get_udev</function></funcdef> - <paramdef>struct udev_enumerate *<parameter>udev_enumerate</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <!--<refsect1> - <title>Description</title> - - <para>XXX: Add short description.</para> - </refsect1>--> - - <refsect1> - <title>Return Value</title> - - <para>On success, - <function>udev_enumerate_scan_devices()</function>, - <function>udev_enumerate_scan_subsystems()</function> and - <function>udev_enumerate_add_syspath()</function> - return an integer greater than, or equal to, - <constant>0</constant>.</para> - - <para>On success, - <function>udev_enumerate_get_list_entry()</function> - returns a pointer to the first entry in the list of found - devices. If the list is empty, or on failure, - <constant>NULL</constant> is returned.</para> - - <para><function>udev_enumerate_get_udev()</function> always - returns a pointer to the udev context that this enumerated - object is associated with.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>udev_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_device_new_from_syspath</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_enumerate_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_enumerate_add_match_subsystem</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_monitor_new_from_netlink</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_list_entry</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - </para> - </refsect1> - -</refentry> diff --git a/man/udev_list_entry.xml b/man/udev_list_entry.xml deleted file mode 100644 index a1b531d52a..0000000000 --- a/man/udev_list_entry.xml +++ /dev/null @@ -1,123 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ -<!ENTITY % entities SYSTEM "custom-entities.ent" > -%entities; -]> - -<!-- - This file is part of systemd. - - Copyright 2015 David Herrmann <dh.herrmann@gmail.com> - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="udev_list_entry" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>udev_list_entry</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>David</firstname> - <surname>Herrmann</surname> - <email>dh.herrmann@gmail.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>udev_list_entry</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>udev_list_entry</refname> - <refname>udev_list_entry_get_next</refname> - <refname>udev_list_entry_get_by_name</refname> - <refname>udev_list_entry_get_name</refname> - <refname>udev_list_entry_get_value</refname> - - <refpurpose>Iterate and access udev lists</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <libudev.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>struct udev_list_entry *<function>udev_list_entry_get_next</function></funcdef> - <paramdef>struct udev_list_entry *<parameter>list_entry</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev_list_entry *<function>udev_list_entry_get_by_name</function></funcdef> - <paramdef>struct udev_list_entry *<parameter>list_entry</parameter></paramdef> - <paramdef>const char *<parameter>name</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>const char *<function>udev_list_entry_get_name</function></funcdef> - <paramdef>struct udev_list_entry *<parameter>list_entry</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>const char *<function>udev_list_entry_get_value</function></funcdef> - <paramdef>struct udev_list_entry *<parameter>list_entry</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <!--<refsect1> - <title>Description</title> - - <para>XXX: Add short description.</para> - </refsect1>--> - - <refsect1> - <title>Return Value</title> - - <para>On success, - <function>udev_list_entry_get_next()</function> and - <function>udev_list_entry_get_by_name()</function> return - a pointer to the requested list entry. If no such entry can - be found, or on failure, <constant>NULL</constant> is - returned.</para> - - <para>On success, - <function>udev_list_entry_get_name()</function> and - <function>udev_list_entry_get_value()</function> return a - pointer to a constant string representing the requested value. - The string is bound to the lifetime of the list entry itself. - On failure, <constant>NULL</constant> is returned.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>udev_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_device_new_from_syspath</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_enumerate_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_monitor_new_from_netlink</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - </para> - </refsect1> - -</refentry> diff --git a/man/udev_monitor_filter_update.xml b/man/udev_monitor_filter_update.xml deleted file mode 100644 index f129595618..0000000000 --- a/man/udev_monitor_filter_update.xml +++ /dev/null @@ -1,122 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ -<!ENTITY % entities SYSTEM "custom-entities.ent" > -%entities; -]> - -<!-- - This file is part of systemd. - - Copyright 2015 David Herrmann <dh.herrmann@gmail.com> - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="udev_monitor_filter_update" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>udev_monitor_filter_update</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>David</firstname> - <surname>Herrmann</surname> - <email>dh.herrmann@gmail.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>udev_monitor_filter_update</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>udev_monitor_filter_update</refname> - <refname>udev_monitor_filter_remove</refname> - <refname>udev_monitor_filter_add_match_subsystem_devtype</refname> - <refname>udev_monitor_filter_add_match_tag</refname> - - <refpurpose>Modify filters</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <libudev.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>int <function>udev_monitor_filter_update</function></funcdef> - <paramdef>struct udev_monitor *<parameter>udev_monitor</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_monitor_filter_remove</function></funcdef> - <paramdef>struct udev_monitor *<parameter>udev_monitor</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_monitor_filter_add_match_subsystem_devtype</function></funcdef> - <paramdef>struct udev_monitor *<parameter>udev_monitor</parameter></paramdef> - <paramdef>const char *<parameter>subsystem</parameter></paramdef> - <paramdef>const char *<parameter>devtype</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_monitor_filter_add_match_tag</function></funcdef> - <paramdef>struct udev_monitor *<parameter>udev_monitor</parameter></paramdef> - <paramdef>const char *<parameter>tag</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <!--<refsect1> - <title>Description</title> - - <para>XXX: Add short description.</para> - </refsect1>--> - - <refsect1> - <title>Return Value</title> - - <para>On success, - <function>udev_monitor_filter_update()</function>, - <function>udev_monitor_filter_remove()</function>, - <function>udev_monitor_filter_add_match_subsystem_devtype()</function> - and - <function>udev_monitor_filter_add_match_tag()</function> - return an integer greater than, or equal to, - <constant>0</constant>. On failure, a negative error code is - returned.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>udev_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_device_new_from_syspath</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_enumerate_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_monitor_new_from_netlink</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_monitor_receive_device</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_list_entry</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - </para> - </refsect1> - -</refentry> diff --git a/man/udev_monitor_new_from_netlink.xml b/man/udev_monitor_new_from_netlink.xml deleted file mode 100644 index d73a4acaec..0000000000 --- a/man/udev_monitor_new_from_netlink.xml +++ /dev/null @@ -1,113 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ -<!ENTITY % entities SYSTEM "custom-entities.ent" > -%entities; -]> - -<!-- - This file is part of systemd. - - Copyright 2015 David Herrmann <dh.herrmann@gmail.com> - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="udev_monitor_new_from_netlink" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>udev_monitor_new_from_netlink</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>David</firstname> - <surname>Herrmann</surname> - <email>dh.herrmann@gmail.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>udev_monitor_new_from_netlink</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>udev_monitor_new_from_netlink</refname> - <refname>udev_monitor_ref</refname> - <refname>udev_monitor_unref</refname> - - <refpurpose>Create, acquire and release a udev monitor object</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <libudev.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>struct udev_monitor *<function>udev_monitor_new_from_netlink</function></funcdef> - <paramdef>struct udev *<parameter>udev</parameter></paramdef> - <paramdef>const char *<parameter>name</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev_monitor *<function>udev_monitor_ref</function></funcdef> - <paramdef>struct udev_monitor *<parameter>udev_monitor</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev_monitor *<function>udev_monitor_unref</function></funcdef> - <paramdef>struct udev_monitor *<parameter>udev_monitor</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <!--<refsect1> - <title>Description</title> - - <para>XXX: Add short description.</para> - </refsect1>--> - - <refsect1> - <title>Return Value</title> - - <para>On success, - <function>udev_monitor_new_from_netlink()</function> returns a - pointer to the allocated udev monitor. On failure, - <constant>NULL</constant> is returned. - <function>udev_monitor_ref()</function> returns the argument - that it was passed, unmodified. - <function>udev_monitor_unref()</function> always returns - <constant>NULL</constant>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>udev_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_device_new_from_syspath</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_enumerate_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_monitor_filter_update</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_monitor_receive_device</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_list_entry</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - </para> - </refsect1> - -</refentry> diff --git a/man/udev_monitor_receive_device.xml b/man/udev_monitor_receive_device.xml deleted file mode 100644 index 7e842f88df..0000000000 --- a/man/udev_monitor_receive_device.xml +++ /dev/null @@ -1,137 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ -<!ENTITY % entities SYSTEM "custom-entities.ent" > -%entities; -]> - -<!-- - This file is part of systemd. - - Copyright 2015 David Herrmann <dh.herrmann@gmail.com> - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="udev_monitor_receive_device" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>udev_monitor_receive_device</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>David</firstname> - <surname>Herrmann</surname> - <email>dh.herrmann@gmail.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>udev_monitor_receive_device</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>udev_monitor_receive_device</refname> - <refname>udev_monitor_enable_receiving</refname> - <refname>udev_monitor_set_receive_buffer_size</refname> - <refname>udev_monitor_get_fd</refname> - <refname>udev_monitor_get_udev</refname> - - <refpurpose>Query and modify device monitor</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <libudev.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>struct udev_device *<function>udev_monitor_receive_device</function></funcdef> - <paramdef>struct udev_monitor *<parameter>udev_monitor</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_monitor_enable_receiving</function></funcdef> - <paramdef>struct udev_monitor *<parameter>udev_monitor</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_monitor_set_receive_buffer_size</function></funcdef> - <paramdef>struct udev_monitor *<parameter>udev_monitor</parameter></paramdef> - <paramdef>int <parameter>size</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>int <function>udev_monitor_get_fd</function></funcdef> - <paramdef>struct udev_monitor *<parameter>udev_monitor</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev *<function>udev_monitor_get_udev</function></funcdef> - <paramdef>struct udev_monitor *<parameter>udev_monitor</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <!--<refsect1> - <title>Description</title> - - <para>XXX: Add short description.</para> - </refsect1>--> - - <refsect1> - <title>Return Value</title> - - <para>On success, - <function>udev_monitor_receive_device()</function> returns a - pointer to a newly referenced device that was received via the - monitor. The caller is responsible to drop this reference when - done. On failure, <constant>NULL</constant> is returned.</para> - - <para>On success, - <function>udev_monitor_enable_receiving()</function> and - <function>udev_monitor_set_receive_buffer_size()</function> - return an integer greater than, or equal to, - <constant>0</constant>. On failure, a negative error code is - returned.</para> - - <para>On success, <function>udev_monitor_get_fd()</function> - returns the file descriptor used by this monitor. On failure, - a negative error code is returned.</para> - - <para><function>udev_monitor_get_udev()</function> always returns - a pointer to the udev context that this monitor is associated - with.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>udev_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_device_new_from_syspath</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_enumerate_new</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_monitor_new_from_netlink</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_monitor_filter_update</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>udev_list_entry</refentrytitle><manvolnum>3</manvolnum></citerefentry>, - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - </para> - </refsect1> - -</refentry> diff --git a/man/udev_new.xml b/man/udev_new.xml deleted file mode 100644 index 587835a3ca..0000000000 --- a/man/udev_new.xml +++ /dev/null @@ -1,110 +0,0 @@ -<?xml version='1.0'?> <!--*-nxml-*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [ -<!ENTITY % entities SYSTEM "custom-entities.ent" > -%entities; -]> - -<!-- - This file is part of systemd. - - Copyright 2015 David Herrmann <dh.herrmann@gmail.com> - - systemd is free software; you can redistribute it and/or modify it - under the terms of the GNU Lesser General Public License as published by - the Free Software Foundation; either version 2.1 of the License, or - (at your option) any later version. - - systemd is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public License - along with systemd; If not, see <http://www.gnu.org/licenses/>. ---> - -<refentry id="udev_new" - xmlns:xi="http://www.w3.org/2001/XInclude"> - - <refentryinfo> - <title>udev_new</title> - <productname>systemd</productname> - - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>David</firstname> - <surname>Herrmann</surname> - <email>dh.herrmann@gmail.com</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>udev_new</refentrytitle> - <manvolnum>3</manvolnum> - </refmeta> - - <refnamediv> - <refname>udev_new</refname> - <refname>udev_ref</refname> - <refname>udev_unref</refname> - - <refpurpose>Create, acquire and release a udev context object</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <funcsynopsis> - <funcsynopsisinfo>#include <libudev.h></funcsynopsisinfo> - - <funcprototype> - <funcdef>struct udev *<function>udev_new</function></funcdef> - <paramdef><parameter>void</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev *<function>udev_ref</function></funcdef> - <paramdef>struct udev *<parameter>udev</parameter></paramdef> - </funcprototype> - - <funcprototype> - <funcdef>struct udev *<function>udev_unref</function></funcdef> - <paramdef>struct udev *<parameter>udev</parameter></paramdef> - </funcprototype> - - </funcsynopsis> - </refsynopsisdiv> - - <refsect1> - <title>Description</title> - - <para><function>udev_new()</function> allocates a new udev context - object and returns a pointer to it. This object is opaque and must - not be accessed by the caller via different means than functions - provided by libudev. Initially, the reference count of the context - is 1. You can acquire further references, and drop gained references - via <function>udev_ref()</function> and - <function>udev_unref()</function>. Once the reference count hits 0, - the context object is destroyed and freed.</para> - </refsect1> - - <refsect1> - <title>Return Value</title> - - <para>On success, <function>udev_new()</function> returns a pointer - to the allocated udev context. On failure, <constant>NULL</constant> - is returned. <function>udev_ref()</function> returns the argument - that it was passed, unmodified. <function>udev_unref()</function> - always returns <constant>NULL</constant>.</para> - </refsect1> - - <refsect1> - <title>See Also</title> - - <para> - <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, - </para> - </refsect1> - -</refentry> diff --git a/man/udevadm.xml b/man/udevadm.xml deleted file mode 100644 index 8c1abd2770..0000000000 --- a/man/udevadm.xml +++ /dev/null @@ -1,576 +0,0 @@ -<?xml version='1.0'?> <!--*- Mode: nxml; nxml-child-indent: 2; indent-tabs-mode: nil -*--> -<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" - "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> - -<refentry id="udevadm"> - <refentryinfo> - <title>udevadm</title> - <productname>systemd</productname> - <authorgroup> - <author> - <contrib>Developer</contrib> - <firstname>Kay</firstname> - <surname>Sievers</surname> - <email>kay@vrfy.org</email> - </author> - </authorgroup> - </refentryinfo> - - <refmeta> - <refentrytitle>udevadm</refentrytitle> - <manvolnum>8</manvolnum> - </refmeta> - - <refnamediv> - <refname>udevadm</refname><refpurpose>udev management tool</refpurpose> - </refnamediv> - - <refsynopsisdiv> - <cmdsynopsis> - <command>udevadm</command> - <arg><option>--debug</option></arg> - <arg><option>--version</option></arg> - <arg><option>--help</option></arg> - </cmdsynopsis> - <cmdsynopsis> - <command>udevadm info <replaceable>options</replaceable></command> - </cmdsynopsis> - <cmdsynopsis> - <command>udevadm trigger <optional>options</optional></command> - </cmdsynopsis> - <cmdsynopsis> - <command>udevadm settle <optional>options</optional></command> - </cmdsynopsis> - <cmdsynopsis> - <command>udevadm control <replaceable>command</replaceable></command> - </cmdsynopsis> - <cmdsynopsis> - <command>udevadm monitor <optional>options</optional></command> - </cmdsynopsis> - <cmdsynopsis> - <command>udevadm test <optional>options</optional> <replaceable>devpath</replaceable></command> - </cmdsynopsis> - <cmdsynopsis> - <command>udevadm test-builtin <optional>options</optional> <replaceable>command</replaceable> <replaceable>devpath</replaceable></command> - </cmdsynopsis> - </refsynopsisdiv> - - <refsect1><title>Description</title> - <para><command>udevadm</command> expects a command and command - specific options. It controls the runtime behavior of - <command>systemd-udevd</command>, requests kernel events, manages - the event queue, and provides simple debugging mechanisms.</para> - </refsect1> - - <refsect1><title>Options</title> - <variablelist> - <varlistentry> - <term><option>--debug</option></term> - <listitem> - <para>Print debug messages to standard error.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>--version</option></term> - <listitem> - <para>Print version number.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-h</option></term> - <term><option>--help</option></term> - <listitem> - <para>Print help text.</para> - </listitem> - </varlistentry> - </variablelist> - - <refsect2><title>udevadm info - <arg choice="opt"><replaceable>options</replaceable></arg> - <arg choice="opt"><replaceable>devpath</replaceable>|<replaceable>file</replaceable></arg> - </title> - - <para>Queries the udev database for device information - stored in the udev database. It can also query the properties - of a device from its sysfs representation to help creating udev - rules that match this device.</para> - <variablelist> - <varlistentry> - <term><option>-q</option></term> - <term><option>--query=<replaceable>TYPE</replaceable></option></term> - <listitem> - <para>Query the database for the specified type of device - data. It needs the <option>--path</option> or - <option>--name</option> to identify the specified device. - Valid <replaceable>TYPE</replaceable>s are: - <constant>name</constant>, <constant>symlink</constant>, - <constant>path</constant>, <constant>property</constant>, - <constant>all</constant>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-p</option></term> - <term><option>--path=<replaceable>DEVPATH</replaceable></option></term> - <listitem> - <para>The <filename>/sys</filename> path of the device to - query, e.g. - <filename><optional>/sys</optional>/class/block/sda</filename>. - Note that this option usually is not very useful, since - <command>udev</command> can guess the type of the - argument, so <command>udevadm - --devpath=/class/block/sda</command> is equivalent to - <command>udevadm /sys/class/block/sda</command>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-n</option></term> - <term><option>--name=<replaceable>FILE</replaceable></option></term> - <listitem> - <para>The name of the device node or a symlink to query, - e.g. <filename><optional>/dev</optional>/sda</filename>. - Note that this option usually is not very useful, since - <command>udev</command> can guess the type of the - argument, so <command>udevadm --name=sda</command> is - equivalent to <command>udevadm /dev/sda</command>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-r</option></term> - <term><option>--root</option></term> - <listitem> - <para>Print absolute paths in <command>name</command> or <command>symlink</command> - query.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-a</option></term> - <term><option>--attribute-walk</option></term> - <listitem> - <para>Print all sysfs properties of the specified device that can be used - in udev rules to match the specified device. It prints all devices - along the chain, up to the root of sysfs that can be used in udev rules.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-x</option></term> - <term><option>--export</option></term> - <listitem> - <para>Print output as key/value pairs. Values are enclosed in single quotes.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-P</option></term> - <term><option>--export-prefix=<replaceable>NAME</replaceable></option></term> - <listitem> - <para>Add a prefix to the key name of exported values.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-d</option></term> - <term><option>--device-id-of-file=<replaceable>FILE</replaceable></option></term> - <listitem> - <para>Print major/minor numbers of the underlying device, where the file - lives on.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-e</option></term> - <term><option>--export-db</option></term> - <listitem> - <para>Export the content of the udev database.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-c</option></term> - <term><option>--cleanup-db</option></term> - <listitem> - <para>Cleanup the udev database.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>--version</option></term> - <listitem> - <para>Print version.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-h</option></term> - <term><option>--help</option></term> - <listitem> - <para>Print help text.</para> - </listitem> - </varlistentry> - </variablelist> - - <para>In addition, an optional positional argument can be used - to specify a device name or a sys path. It must start with - <filename>/dev</filename> or <filename>/sys</filename> - respectively.</para> - </refsect2> - - <refsect2><title>udevadm trigger - <arg choice="opt"><replaceable>options</replaceable></arg> - <arg choice="opt" rep="repeat"><replaceable>devpath</replaceable>|<replaceable>file</replaceable></arg></title> - <para>Request device events from the kernel. Primarily used to replay events at system coldplug time.</para> - <variablelist> - <varlistentry> - <term><option>-v</option></term> - <term><option>--verbose</option></term> - <listitem> - <para>Print the list of devices which will be triggered.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-n</option></term> - <term><option>--dry-run</option></term> - <listitem> - <para>Do not actually trigger the event.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-t</option></term> - <term><option>--type=<replaceable>TYPE</replaceable></option></term> - <listitem> - <para>Trigger a specific type of devices. Valid types are: - <command>devices</command>, <command>subsystems</command>. - The default value is <command>devices</command>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-c</option></term> - <term><option>--action=<replaceable>ACTION</replaceable></option></term> - <listitem> - <para>Type of event to be triggered. The default value is - <command>change</command>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-s</option></term> - <term><option>--subsystem-match=<replaceable>SUBSYSTEM</replaceable></option></term> - <listitem> - <para>Trigger events for devices which belong to a - matching subsystem. This option can be specified multiple - times and supports shell style pattern matching.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-S</option></term> - <term><option>--subsystem-nomatch=<replaceable>SUBSYSTEM</replaceable></option></term> - <listitem> - <para>Do not trigger events for devices which belong to a matching subsystem. This option - can be specified multiple times and supports shell style pattern matching.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-a</option></term> - <term><option>--attr-match=<replaceable>ATTRIBUTE</replaceable>=<replaceable>VALUE</replaceable></option></term> - <listitem> - <para>Trigger events for devices with a matching sysfs - attribute. If a value is specified along with the - attribute name, the content of the attribute is matched - against the given value using shell style pattern - matching. If no value is specified, the existence of the - sysfs attribute is checked. This option can be specified - multiple times.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-A</option></term> - <term><option>--attr-nomatch=<replaceable>ATTRIBUTE</replaceable>=<replaceable>VALUE</replaceable></option></term> - <listitem> - <para>Do not trigger events for devices with a matching - sysfs attribute. If a value is specified along with the - attribute name, the content of the attribute is matched - against the given value using shell style pattern - matching. If no value is specified, the existence of the - sysfs attribute is checked. This option can be specified - multiple times.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-p</option></term> - <term><option>--property-match=<replaceable>PROPERTY</replaceable>=<replaceable>VALUE</replaceable></option></term> - <listitem> - <para>Trigger events for devices with a matching property - value. This option can be specified multiple times and - supports shell style pattern matching.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-g</option></term> - <term><option>--tag-match=<replaceable>PROPERTY</replaceable></option></term> - <listitem> - <para>Trigger events for devices with a matching tag. This - option can be specified multiple times.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-y</option></term> - <term><option>--sysname-match=<replaceable>PATH</replaceable></option></term> - <listitem> - <para>Trigger events for devices with a matching sys - device path. This option can be specified multiple times - and supports shell style pattern matching.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>--name-match=<replaceable>NAME</replaceable></option></term> - <listitem> - <para>Trigger events for devices with a matching - device path. This option can be specified multiple - times.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-b</option></term> - <term><option>--parent-match=<replaceable>SYSPATH</replaceable></option></term> - <listitem> - <para>Trigger events for all children of a given - device.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-h</option></term> - <term><option>--help</option></term> - <listitem> - <para>Print help text.</para> - </listitem> - </varlistentry> - </variablelist> - - <para>In addition, optional positional arguments can be used - to specify device names or sys paths. They must start with - <filename>/dev</filename> or <filename>/sys</filename> - respectively.</para> - </refsect2> - - <refsect2><title>udevadm settle - <arg choice="opt"><replaceable>options</replaceable></arg> - </title> - <para>Watches the udev event queue, and exits if all current events are handled.</para> - <variablelist> - <varlistentry> - <term><option>-t</option></term> - <term><option>--timeout=<replaceable>SECONDS</replaceable></option></term> - <listitem> - <para>Maximum number of seconds to wait for the event - queue to become empty. The default value is 120 seconds. A - value of 0 will check if the queue is empty and always - return immediately.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-E</option></term> - <term><option>--exit-if-exists=<replaceable>FILE</replaceable></option></term> - <listitem> - <para>Stop waiting if file exists.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-h</option></term> - <term><option>--help</option></term> - <listitem> - <para>Print help text.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect2> - - <refsect2><title>udevadm control <replaceable>command</replaceable></title> - <para>Modify the internal state of the running udev daemon.</para> - <variablelist> - <varlistentry> - <term><option>-x</option></term> - <term><option>--exit</option></term> - <listitem> - <para>Signal and wait for systemd-udevd to exit.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-l</option></term> - <term><option>--log-priority=<replaceable>value</replaceable></option></term> - <listitem> - <para>Set the internal log level of - <filename>systemd-udevd</filename>. Valid values are the - numerical syslog priorities or their textual - representations: <option>emerg</option>, - <option>alert</option>, <option>crit</option>, - <option>err</option>, <option>warning</option>, - <option>notice</option>, <option>info</option>, and - <option>debug</option>.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-s</option></term> - <term><option>--stop-exec-queue</option></term> - <listitem> - <para>Signal systemd-udevd to stop executing new events. Incoming events - will be queued.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-S</option></term> - <term><option>--start-exec-queue</option></term> - <listitem> - <para>Signal systemd-udevd to enable the execution of events.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-R</option></term> - <term><option>--reload</option></term> - <listitem> - <para>Signal systemd-udevd to reload the rules files and other databases like the kernel - module index. Reloading rules and databases does not apply any changes to already - existing devices; the new configuration will only be applied to new events.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-p</option></term> - <term><option>--property=<replaceable>KEY</replaceable>=<replaceable>value</replaceable></option></term> - <listitem> - <para>Set a global property for all events.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-m</option></term> - <term><option>--children-max=</option><replaceable>value</replaceable></term> - <listitem> - <para>Set the maximum number of events, systemd-udevd will handle at the - same time.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>--timeout=</option><replaceable>seconds</replaceable></term> - <listitem> - <para>The maximum number of seconds to wait for a reply from systemd-udevd.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-h</option></term> - <term><option>--help</option></term> - <listitem> - <para>Print help text.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect2> - - <refsect2><title>udevadm monitor - <arg choice="opt"><replaceable>options</replaceable></arg> - </title> - <para>Listens to the kernel uevents and events sent out by a udev rule - and prints the devpath of the event to the console. It can be used to analyze the - event timing, by comparing the timestamps of the kernel uevent and the udev event. - </para> - <variablelist> - <varlistentry> - <term><option>-k</option></term> - <term><option>--kernel</option></term> - <listitem> - <para>Print the kernel uevents.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-u</option></term> - <term><option>--udev</option></term> - <listitem> - <para>Print the udev event after the rule processing.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-p</option></term> - <term><option>--property</option></term> - <listitem> - <para>Also print the properties of the event.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-s</option></term> - <term><option>--subsystem-match=<replaceable>string[/string]</replaceable></option></term> - <listitem> - <para>Filter events by subsystem[/devtype]. Only udev events with a matching subsystem value will pass.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-t</option></term> - <term><option>--tag-match=<replaceable>string</replaceable></option></term> - <listitem> - <para>Filter events by property. Only udev events with a given tag attached will pass.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-h</option></term> - <term><option>--help</option></term> - <listitem> - <para>Print help text.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect2> - - <refsect2><title>udevadm test - <arg choice="opt"><replaceable>options</replaceable></arg> - <arg><replaceable>devpath</replaceable></arg> - </title> - <para>Simulate a udev event run for the given device, and print debug output.</para> - <variablelist> - <varlistentry> - <term><option>-a</option></term> - <term><option>--action=<replaceable>string</replaceable></option></term> - <listitem> - <para>The action string.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-N</option></term> - <term><option>--resolve-names=<constant>early</constant>|<constant>late</constant>|<constant>never</constant></option></term> - <listitem> - <para>Specify when udevadm should resolve names of users - and groups. When set to <constant>early</constant> (the - default), names will be resolved when the rules are - parsed. When set to <constant>late</constant>, names will - be resolved for every event. When set to - <constant>never</constant>, names will never be resolved - and all devices will be owned by root.</para> - </listitem> - </varlistentry> - <varlistentry> - <term><option>-h</option></term> - <term><option>--help</option></term> - <listitem> - <para>Print help text.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect2> - - <refsect2><title>udevadm test-builtin - <arg choice="opt"><replaceable>options</replaceable></arg> - <arg><replaceable>command</replaceable></arg> - <arg><replaceable>devpath</replaceable></arg> - </title> - <para>Run a built-in command <replaceable>COMMAND</replaceable> - for device <replaceable>DEVPATH</replaceable>, and print debug - output.</para> - <variablelist> - <varlistentry> - <term><option>-h</option></term> - <term><option>--help</option></term> - <listitem> - <para>Print help text.</para> - </listitem> - </varlistentry> - </variablelist> - </refsect2> - </refsect1> - - <refsect1> - <title>See Also</title> - <para><citerefentry> - <refentrytitle>udev</refentrytitle><manvolnum>7</manvolnum> - </citerefentry>, - <citerefentry> - <refentrytitle>systemd-udevd.service</refentrytitle><manvolnum>8</manvolnum> - </citerefentry></para> - </refsect1> -</refentry> |