summaryrefslogtreecommitdiff
path: root/shell-completion/systemd-zsh-completion.zsh
diff options
context:
space:
mode:
Diffstat (limited to 'shell-completion/systemd-zsh-completion.zsh')
-rw-r--r--shell-completion/systemd-zsh-completion.zsh1023
1 files changed, 1023 insertions, 0 deletions
diff --git a/shell-completion/systemd-zsh-completion.zsh b/shell-completion/systemd-zsh-completion.zsh
new file mode 100644
index 0000000000..59755e62d9
--- /dev/null
+++ b/shell-completion/systemd-zsh-completion.zsh
@@ -0,0 +1,1023 @@
+#compdef systemctl loginctl journalctl hostnamectl localectl timedatectl systemd-coredumpctl udevadm systemd-analyze systemd-cat systemd-ask-password systemd-cgls systemd-cgtop systemd-delta systemd-detect-virt systemd-inhibit systemd-machine-id-setup systemd-notify systemd-nspawn systemd-tmpfiles systemd-tty-ask-password-agent
+
+_ctls()
+{
+ local curcontext="$curcontext" state lstate line
+ case "$service" in
+ systemctl)
+ # -s for aggregated options like -aP
+ _arguments -s \
+ {-h,--help}'[Show help]' \
+ '--version[Show package version]' \
+ {-t,--type=}'[List only units of a particular type]:unit type:(automount device mount path service snapshot socket swap target timer)' \
+ \*{-p,--property=}'[Show only properties by specific name]:unit property' \
+ {-a,--all}'[Show all units/properties, including dead/empty ones]' \
+ '--failed[Show only failed units]' \
+ "--full[Don't ellipsize unit names on output]" \
+ '--fail[When queueing a new job, fail if conflicting jobs are pending]' \
+ '--ignore-dependencies[When queueing a new job, ignore all its dependencies]' \
+ '--kill-who=[Who to send signal to]:killwho:(main control all)' \
+ {-s,--signal=}'[Which signal to send]:signal:_signals' \
+ {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
+ {-P,--privileged}'[Acquire privileges before execution]' \
+ {-q,--quiet}'[Suppress output]' \
+ '--no-block[Do not wait until operation finished]' \
+ "--no-wall[Don't send wall message before halt/power-off/reboot]" \
+ "--no-reload[When enabling/disabling unit files, don't reload daemon configuration]" \
+ '--no-legend[Do not print a legend, i.e. the column headers and the footer with hints]' \
+ '--no-pager[Do not pipe output into a pager]' \
+ '--no-ask-password[Do not ask for system passwords]' \
+ '--order[When generating graph for dot, show only order]' \
+ '--require[When generating graph for dot, show only requirement]' \
+ '--system[Connect to system manager]' \
+ '--user[Connect to user service manager]' \
+ '--global[Enable/disable unit files globally]' \
+ {-f,--force}'[When enabling unit files, override existing symlinks. When shutting down, execute action immediately]' \
+ '--root=[Enable unit files in the specified root directory]:directory:_directories' \
+ '--runtime[Enable unit files only temporarily until next reboot]' \
+ {-n,--lines=}'[Journal entries to show]:number of entries' \
+ {-o,--output=}'[Change journal output mode]:modes:_outputmodes' \
+ '*::systemctl command:_systemctl_command'
+ ;;
+ loginctl)
+ _arguments -s \
+ {-h,--help}'[Show help]' \
+ '--version[Show package version]' \
+ \*{-p,--property=}'[Show only properties by this name]:unit property' \
+ {-a,--all}'[Show all properties, including empty ones]' \
+ '--kill-who=[Who to send signal to]:killwho:(main control all)' \
+ {-s,--signal=}'[Which signal to send]:signal:_signals' \
+ '--no-ask-password[Do not ask for system passwords]' \
+ {-H,--host=}'[Show information for remote host]:userathost:_hosts_or_user_at_host' \
+ {-P,--privileged}'[Acquire privileges before execution]' \
+ '--no-pager[Do not pipe output into a pager]' \
+ '*::loginctl command:_loginctl_command'
+ ;;
+
+ hostnamectl)
+ _arguments -s \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ '--transient[Only set transient hostname]' \
+ '--static[Only set static hostname]' \
+ '--pretty[Only set pretty hostname]' \
+ '--no-ask-password[Do not prompt for password]' \
+ {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
+ '*::hostnamectl commands:_hostnamectl_command'
+ ;;
+ journalctl)
+ _arguments -s \
+ '--since=[Start showing entries newer or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
+ '--until=[Stop showing entries older or of the specified date]:YYYY-MM-DD HH\:MM\:SS' \
+ {-c,--cursor=}'[Start showing entries from specified cursor]:cursors:_journal_fields __CURSORS' \
+ {-b,--this-boot}'[Show data only from current boot]' \
+ {-u,--unit=}'[Show data only from the specified unit]:units:_journal_fields _SYSTEMD_UNIT' \
+ {-p,--priority=}'[Show only messages within the specified priority range]:priority:_journal_fields PRIORITY' \
+ {-f,--follow}'[Follow journal]' \
+ {-n,--lines=}'[Number of journal entries to show]:integer' \
+ '--no-tail[Show all lines, even in follow mode]' \
+ {-o,--output=}'[Change journal output mode]:output modes:_outputmodes' \
+ {-a,--all}'[Show all fields, including long and unprintable]' \
+ {-q,--quiet}"[Don't show privilege warning]" \
+ '--no-pager[Do not pipe output into a pager]' \
+ {-m,--merge}'[Show entries from all available journals]' \
+ {-D,--directory=}'[Show journal files from directory]:directories:_directories' \
+ '--interval=[Time interval for changing the FSS sealing key]:time interval' \
+ '--verify-key=[Specify FSS verification key]:FSS key' \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ '--new-id128[Generate a new 128 Bit ID]' \
+ '--header[Show journal header information]' \
+ '--disk-usage[Show total disk usage]' \
+ {-F,--field=}'[List all values a certain field takes]:Fields:_list_fields' \
+ '--setup-keys[Generate new FSS key pair]' \
+ '--verify[Verify journal file consistency]'
+ ;;
+ localectl)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ "--no-convert[Don't convert keyboard mappings]" \
+ '--no-pager[Do not pipe output into a pager]' \
+ '--no-ask-password[Do not prompt for password]' \
+ {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
+ '*::localectl commands:_localectl_command'
+ ;;
+ systemd-coredumpctl)
+ _arguments \
+ {-o,--output=}'[Write output to FILE]:output file:_files' \
+ '--no-pager[Do not pipe output into a pager]' \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ '*::systemd-coredumpctl commands:_systemd-coredumpctl_command'
+
+ ;;
+ timedatectl)
+ _arguments -s \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ '--adjust-system-clock[Adjust system clock when changing local RTC mode]' \
+ '--no-pager[Do not pipe output into a pager]' \
+ '--no-ask-password[Do not prompt for password]' \
+ {-H,--host=}'[Operate on remote host]:userathost:_hosts_or_user_at_host' \
+ '*::timedatectl commands:_timedatectl_command'
+ ;;
+ udevadm)
+ _arguments \
+ '--debug[Print debug messages to stderr]' \
+ '--version[Print version number]' \
+ '--help[Print help text]' \
+ '*::udevadm commands:_udevadm_command'
+ ;;
+ systemd-analyze)
+ _arguments \
+ {-h,--help}'[Show help text.]' \
+ '--user[Shows performance data of user sessions instead of the system manager.]' \
+ '*::systemd-analyze commands:_systemd_analyze_command'
+ ;;
+ systemd-ask-password)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ '--icon=[Icon name]' \
+ '--timeout=[Timeout in sec]' \
+ '--no-tty[Ask question via agent even on TTY]' \
+ '--accept-cached[Accept cached passwords]' \
+ '--multiple[List multiple passwords if available]'
+ ;;
+ systemd-cat)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version.]' \
+ {-t,--identifier=}'[Set syslog identifier.]' \
+ {-p,--priority=}'[Set priority value.]:value:({0..7})' \
+ '--level-prefix=[Control whether level prefix shall be parsed.]:boolean:(1 0)' \
+ ':Message'
+ ;;
+ systemd-cgls)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ '--no-pager[Do not pipe output into a pager]' \
+ {-a,--all}'[Show all groups, including empty]' \
+ '-k[Include kernel threads in output]' \
+ ':cgroups:(cpuset cpu cpuacct memory devices freezer net_cls blkio)'
+ ;;
+ systemd-cgtop)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ '--version[Print version and exit]' \
+ '(-c -m -i -t)-p[Order by path]' \
+ '(-c -p -m -i)-t[Order by number of tasks]' \
+ '(-m -p -i -t)-c[Order by CPU load]' \
+ '(-c -p -i -t)-m[Order by memory load]' \
+ '(-c -m -p -t)-i[Order by IO load]' \
+ {-d,--delay=}'[Specify delay]' \
+ {-n,--iterations=}'[Run for N iterations before exiting]' \
+ {-b,--batch}'[Run in batch mode, accepting no input]' \
+ '--depth=[Maximum traversal depth]'
+ ;;
+ systemd-delta)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ '--no-pager[Do not pipe output into a pager]' \
+ '--diff=[Show a diff when overridden files differ]:boolean:(1 0)' \
+ {-t,--type=}'[Only display a selected set of override types]:types:(masked equivalent redirected overridden unchanged)' \
+ ':SUFFIX:(tmpfiles.d sysctl.d systemd/system)'
+ ;;
+ systemd-detect-virt)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ {-c,--container}'[Only detect whether we are run in a container]' \
+ {-v,--vm}'[Only detect whether we are run in a VM]' \
+ {-q,--quiet}"[Don't output anything, just set return value]"
+ ;;
+ systemd-inhibit)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ '--what=[Operations to inhibit]:options:(shutdown sleep idle handle-power-key handle-suspend-key handle-hibernate-key handle-lid-switch)' \
+ '--who=[A descriptive string who is inhibiting]' \
+ '--why=[A descriptive string why is being inhibited]' \
+ '--mode=[One of block or delay]' \
+ '--list[List active inhibitors]' \
+ '*:commands:_systemd_inhibit_command'
+ ;;
+ systemd-machine-id-setup)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]'
+ ;;
+ systemd-notify)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ '--version[Show package version]' \
+ '--ready[Inform the init system about service start-up completion.]' \
+ '--pid=[Inform the init system about the main PID of the daemon]' \
+ '--status=[Send a free-form status string for the daemon to the init systemd]' \
+ '--booted[Returns 0 if the system was booted up with systemd]' \
+ '--readahead=[Controls disk read-ahead operations]:arguments:(cancel done noreply)'
+ ;;
+ systemd-nspawn)
+ _arguments \
+ {-h,--help}'[Show this help]' \
+ {--directory=,-D}'[Directory to use as file system root for the namespace container. If omitted the current directory will be used.]:directories:_directories' \
+ {--boot,-b}'[Automatically search for an init binary and invoke it instead of a shell or a user supplied program.]' \
+ {--user=,-u}'[Run the command under specified user, create home directory and cd into it.]' \
+ '--uuid=[Set the specified uuid for the container.]' \
+ {--controllers=,-C}'[Makes the container appear in other hierarchies than the name=systemd:/ one. Takes a comma-separated list of controllers.]' \
+ '--private-network[Turn off networking in the container. This makes all network interfaces unavailable in the container, with the exception of the loopback device.]' \
+ '--read-only[Mount the root file system read only for the container.]' \
+ '--capability=[List one or more additional capabilities to grant the container.]:capabilities:_systemd-nspawn' \
+ "--link-journal=[Control whether the container's journal shall be made visible to the host system.]:options:(no, host, guest, auto)" \
+ '-j[Equivalent to --link-journal=guest.]'
+ ;;
+ systemd-tmpfiles)
+ _arguments \
+ '--create[Create, set ownership/permissions based on the config files.]' \
+ '--clean[Clean up all files and directories with an age parameter configured.]' \
+ '--remove[All files and directories marked with r, R in the configuration files are removed.]' \
+ '--prefix=[Only apply rules that apply to paths with the specified prefix.]' \
+ '--help[Prints a short help text and exits.]' \
+ '*::files:_files'
+ ;;
+ systemd-tty-ask-password-agent)
+ _arguments \
+ {-h,--help}'[Prints a short help text and exits.]' \
+ '--version[Prints a short version string and exits.]' \
+ '--list[Lists all currently pending system password requests.]' \
+ '--query[Process all currently pending system password requests by querying the user on the calling TTY.]' \
+ '--watch[Continuously process password requests.]' \
+ '--wall[Forward password requests to wall(1).]' \
+ '--plymouth[Ask question with plymouth(8).]' \
+ '--console[Ask question on /dev/console.]'
+ ;;
+ *) _message 'eh?' ;;
+ esac
+}
+
+_systemd-nspawn(){
+ local -a _caps
+ _caps=( CAP_CHOWN CAP_DAC_OVERRIDE CAP_DAC_READ_SEARCH
+ CAP_FOWNER CAP_FSETID CAP_IPC_OWNER CAP_KILL CAP_LEASE CAP_LINUX_IMMUTABLE
+ CAP_NET_BIND_SERVICE CAP_NET_BROADCAST CAP_NET_RAW CAP_SETGID CAP_SETFCAP CAP_SETPCAP
+ CAP_SETUID CAP_SYS_ADMIN CAP_SYS_CHROOT CAP_SYS_NICE CAP_SYS_PTRACE CAP_SYS_TTY_CONFIG
+ CAP_SYS_RESOURCE CAP_SYS_BOOT )
+ _values -s , 'capabilities' "$_caps[@]"
+}
+
+_systemd_inhibit_command(){
+ if (( CURRENT == 1 )); then
+ compset -q
+ _normal
+ else
+ local n=${words[(b:2:i)[^-]*]}
+ if (( n <= CURRENT )); then
+ compset -n $n
+ _alternative \
+ 'files:file:_files' \
+ 'commands:command:_normal' && return 0
+ fi
+ _default
+ fi
+
+}
+
+_systemd_analyze_command(){
+ local -a _systemd_analyze_cmds
+ _systemd_analyze_cmds=(
+ 'time:Print the time taken to start'
+ 'blame:prints a list of all running units, ordered by the time they took to initialize'
+ 'plot:prints an SVG graphic detailing which system services have been started at what time'
+ )
+
+ if (( CURRENT == 1 )); then
+ _describe "options" _systemd_analyze_cmds
+ else
+ _message "no more options"
+ fi
+}
+
+_hosts_or_user_at_host()
+{
+ _alternative \
+ 'users-hosts:: _user_at_host' \
+ 'hosts:: _hosts'
+}
+
+_outputmodes() {
+ local -a _output_opts
+ _output_opts=(short short-monotonic verbose export json json-pretty json-see cat)
+ _describe -t output 'output mode' _output_opts || compadd "$@"
+}
+
+
+(( $+functions[_systemctl_command] )) || _systemctl_command()
+{
+ local -a _systemctl_cmds
+ _systemctl_cmds=(
+ "list-units:List units"
+ "start:Start (activate) one or more units"
+ "stop:Stop (deactivate) one or more units"
+ "reload:Reload one or more units"
+ "restart:Start or restart one or more units"
+ "condrestart:Restart one or more units if active"
+ "try-restart:Restart one or more units if active"
+ "reload-or-restart:Reload one or more units is possible, otherwise start or restart"
+ "force-reload:Reload one or more units is possible, otherwise restart if active"
+ "reload-or-try-restart:Reload one or more units is possible, otherwise restart if active"
+ "isolate:Start one unit and stop all others"
+ "kill:Send signal to processes of a unit"
+ "is-active:Check whether units are active"
+ "status:Show runtime status of one or more units"
+ "show:Show properties of one or more units/jobs or the manager"
+ "reset-failed:Reset failed state for all, one, or more units"
+ "load:Load one or more units"
+ "list-unit-files:List installed unit files"
+ "enable:Enable one or more unit files"
+ "disable:Disable one or more unit files"
+ "reenable:Reenable one or more unit files"
+ "preset:Enable/disable one or more unit files based on preset configuration"
+ "mask:Mask one or more units"
+ "unmask:Unmask one or more units"
+ "link:Link one or more units files into the search path"
+ "is-enabled:Check whether unit files are enabled"
+ "list-jobs:List jobs"
+ "cancel:Cancel all, one, or more jobs"
+ "dump:Dump server status"
+ "dot:Dump dependency graph for dot(1)"
+ "snapshot:Create a snapshot"
+ "delete:Remove one or more snapshots"
+ "show-environment:Dump environment"
+ "set-environment:Set one or more environment variables"
+ "unset-environment:Unset one or more environment variables"
+ "daemon-reload:Reload systemd manager configuration"
+ "daemon-reexec:Reexecute systemd manager"
+ "default:Enter system default mode"
+ "rescue:Enter system rescue mode"
+ "emergency:Enter system emergency mode"
+ "halt:Shut down and halt the system"
+ "suspend:Suspend the system"
+ "poweroff:Shut down and power-off the system"
+ "reboot:Shut down and reboot the system"
+ "kexec:Shut down and reboot the system with kexec"
+ "exit:Ask for user instance termination"
+ )
+
+ if (( CURRENT == 1 )); then
+ _describe -t commands 'systemctl command' _systemctl_cmds || compadd "$@"
+ else
+ local curcontext="$curcontext"
+
+ cmd="${${_systemctl_cmds[(r)$words[1]:*]%%:*}}"
+ # Deal with any aliases
+ case $cmd in
+ condrestart) cmd="try-restart";;
+ force-reload) cmd="reload-or-try-restart";;
+ esac
+
+ if (( $#cmd )); then
+ curcontext="${curcontext%:*:*}:systemctl-${cmd}:"
+
+ local update_policy
+ zstyle -s ":completion:${curcontext}:" cache-policy update_policy
+ if [[ -z "$update_policy" ]]; then
+ zstyle ":completion:${curcontext}:" cache-policy _systemctl_caching_policy
+ fi
+
+ _call_function ret _systemctl_$cmd || _message 'no more arguments'
+ else
+ _message "unknown systemctl command: $words[1]"
+ fi
+ return ret
+ fi
+}
+
+__systemctl()
+{
+ systemctl --full --no-legend --no-pager "$@"
+}
+
+
+# Fills the unit list
+_systemctl_all_units()
+{
+ if ( [[ ${+_sys_all_units} -eq 0 ]] || _cache_invalid SYS_ALL_UNITS ) &&
+ ! _retrieve_cache SYS_ALL_UNITS;
+ then
+ _sys_all_units=( $(__systemctl list-units --all | { while read a b; do echo "$a"; done; }) )
+ _store_cache SYS_ALL_UNITS _sys_all_units
+ fi
+}
+
+# Fills the unit list including all file units
+_systemctl_really_all_units()
+{
+ local -a all_unit_files;
+ local -a really_all_units;
+ if ( [[ ${+_sys_really_all_units} -eq 0 ]] || _cache_invalid SYS_REALLY_ALL_UNITS ) &&
+ ! _retrieve_cache SYS_REALLY_ALL_UNITS;
+ then
+ all_unit_files=( $(__systemctl list-unit-files | { while read a b; do echo "$a"; done; }) )
+ _systemctl_all_units
+ really_all_units=($_sys_all_units $all_unit_files)
+ _sys_really_all_units=(${(u)really_all_units})
+ _store_cache SYS_REALLY_ALL_UNITS _sys_really_all_units
+ fi
+}
+
+_filter_units_by_property() {
+ local property=$1 value=$2 ; shift ; shift
+ local -a units ; units=($*)
+ local prop unit
+ for ((i=1; $i <= ${#units[*]}; i++)); do
+ # FIXME: "Failed to issue method call: Unknown unit" errors are ignored for
+ # now (related to DBUS_ERROR_UNKNOWN_OBJECT). in the future, we need to
+ # revert to calling 'systemctl show' once for all units, which is way
+ # faster
+ unit=${units[i]}
+ prop=${(f)"$(_call_program units "$service show --no-pager --property="$property" ${unit} 2>/dev/null")"}
+ if [[ "${prop}" = "$property=$value" ]]; then
+ echo "${unit}"
+ fi
+ done
+}
+
+_systemctl_active_units() {_sys_active_units=( $(__systemctl list-units | { while read a b; do echo "$a"; done; }) )}
+_systemctl_inactive_units(){_sys_inactive_units=($(__systemctl list-units --all | { while read a b c d; do [[ $c == "inactive" ]] && echo "$a"; done; }) )}
+_systemctl_failed_units() {_sys_failed_units=( $(__systemctl list-units --failed | { while read a b; do echo "$a"; done; }) )}
+_systemctl_enabled_units() {_sys_enabled_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "enabled" ]] && echo "$a"; done; }) )}
+_systemctl_disabled_units(){_sys_disabled_units=($(__systemctl list-unit-files | { while read a b; do [[ $b == "disabled" ]] && echo "$a"; done; }) )}
+_systemctl_masked_units() {_sys_masked_units=( $(__systemctl list-unit-files | { while read a b; do [[ $b == "masked" ]] && echo "$a"; done; }) )}
+
+# Completion functions for ALL_UNITS
+for fun in is-active is-enabled status show mask preset ; do
+ (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
+ {
+ _systemctl_really_all_units
+ compadd "$@" -a - _sys_really_all_units
+ }
+done
+
+# Completion functions for ENABLED_UNITS
+for fun in disable reenable ; do
+ (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
+ {
+ _systemctl_enabled_units
+ compadd "$@" -a - _sys_enabled_units
+ }
+done
+
+# Completion functions for DISABLED_UNITS
+(( $+functions[_systemctl_enable] )) || _systemctl_enable()
+{
+ _systemctl_disabled_units
+ compadd "$@" -a - _sys_disabled_units
+}
+
+# Completion functions for FAILED_UNITS
+(( $+functions[_systemctl_reset-failed] )) || _systemctl_reset-failed()
+{
+ _systemctl_failed_units
+ compadd "$@" -a - _sys_failed_units || _message "no failed unit found"
+}
+
+# Completion functions for STARTABLE_UNITS
+(( $+functions[_systemctl_start] )) || _systemctl_start()
+{
+ _systemctl_inactive_units
+ compadd "$@" -a - _sys_inactive_units
+}
+
+# Completion functions for STOPPABLE_UNITS
+for fun in stop kill try-restart condrestart ; do
+ (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
+ {
+ _systemctl_active_units
+ compadd "$@" - $( _filter_units_by_property CanStop yes \
+ ${_sys_active_units[*]} )
+ }
+done
+
+# Completion functions for ISOLATABLE_UNITS
+(( $+functions[_systemctl_isolate] )) || _systemctl_isolate()
+{
+ _systemctl_all_units
+ compadd "$@" - $( _filter_units_by_property AllowIsolate yes \
+ ${_sys_all_units[*]} )
+}
+
+# Completion functions for RELOADABLE_UNITS
+for fun in reload reload-or-try-restart force-reload ; do
+ (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
+ {
+ _systemctl_active_units
+ compadd "$@" - $( _filter_units_by_property CanReload yes \
+ ${_sys_active_units[*]} )
+ }
+done
+
+# Completion functions for RESTARTABLE_UNITS
+for fun in restart reload-or-restart ; do
+ (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
+ {
+ _systemctl_all_units
+ compadd "$@" - $( _filter_units_by_property CanStart yes \
+ ${_sys_all_units[*]} | while read line; do \
+ [[ "$line" =~ \.(device|snapshot|socket|timer)$ ]] || echo "$line"; \
+ done )
+ }
+done
+
+# Completion functions for MASKED_UNITS
+(( $+functions[_systemctl_unmask] )) || _systemctl_unmask()
+{
+ _systemctl_masked_units
+ compadd "$@" -a - _sys_masked_units || _message "no masked unit found"
+}
+
+# Completion functions for JOBS
+(( $+functions[_systemctl_cancel] )) || _systemctl_cancel()
+{
+ compadd "$@" - $(__systemctl list-jobs \
+ | cut -d' ' -f1 2>/dev/null ) || _message "no job found"
+}
+
+# Completion functions for SNAPSHOTS
+(( $+functions[_systemctl_delete] )) || _systemctl_delete()
+{
+ compadd "$@" - $(__systemctl list-units --type snapshot --all \
+ | cut -d' ' -f1 2>/dev/null ) || _message "no snampshot found"
+}
+
+# Completion functions for ENVS
+for fun in set-environment unset-environment ; do
+ (( $+functions[_systemctl_$fun] )) || _systemctl_$fun()
+ {
+ local fun=$0 ; fun=${fun##_systemctl_}
+ local suf
+ if [[ "${fun}" = "set-environment" ]]; then
+ suf='-S='
+ fi
+
+ compadd "$@" ${suf} - $(systemctl show-environment \
+ | while read line; do echo "${line%%\=}";done )
+ }
+done
+
+(( $+functions[_systemctl_link] )) || _systemctl_link() { _files }
+
+# no systemctl completion for:
+# [STANDALONE]='daemon-reexec daemon-reload default dot dump
+# emergency exit halt kexec list-jobs list-units
+# list-unit-files poweroff reboot rescue show-environment'
+# [NAME]='snapshot load'
+
+_systemctl_caching_policy()
+{
+ local _sysunits
+ local -a oldcache
+
+ # rebuild if cache is more than a day old
+ oldcache=( "$1"(mh+1) )
+ (( $#oldcache )) && return 0
+
+ _sysunits=($(__systemctl --all | cut -d' ' -f1))
+
+ if (( $#_sysunits )); then
+ for unit in $_sysunits; do
+ [[ "$unit" -nt "$1" ]] && return 0
+ done
+ fi
+
+ return 1
+}
+
+_list_fields() {
+ local -a journal_fields
+ journal_fields=(MESSAGE{,_ID} PRIORITY CODE_{FILE,LINE,FUNC}
+ ERRNO SYSLOG_{FACILITY,IDENTIFIER,PID}
+ _{P,U,G}ID _COMM _EXE _CMDLINE
+ _AUDIT_{SESSION,LOGINUID}
+ _SYSTEMD_{CGROUP,SESSION,UNIT,OWNER_UID}
+ _SELINUX_CONTEXT _SOURCE_REALTIME_TIMESTAMP
+ _{BOOT,MACHINE}_ID _HOSTNAME _TRANSPORT
+ _KERNEL_{DEVICE,SUBSYSTEM}
+ _UDEV_{SYSNAME,DEVNODE,DEVLINK}
+ __CURSOR __{REALTIME,MONOTONIC}_TIMESTAMP)
+ _describe 'possible fields' journal_fields
+}
+
+_journal_fields() {
+ local -a _fields cmd
+ cmd=("journalctl" "-F ${@[-1]}" "2>/dev/null" )
+ _fields=( ${(f)"$(_call_program fields $cmd[@])"} )
+ typeset -U _fields
+ _describe 'possible values' _fields
+}
+
+
+_loginctl_all_sessions(){_sys_all_sessions=($(loginctl list-sessions | { while read a b; do echo "$a"; done; }) )}
+_loginctl_all_users() {_sys_all_users=( $(loginctl list-users | { while read a b; do echo "$a"; done; }) )}
+_loginctl_all_seats() {_sys_all_seats=( $(loginctl list-seats | { while read a b; do echo "$a"; done; }) )}
+
+# Completion functions for SESSIONS
+for fun in session-status show-session activate lock-session unlock-session terminate-session kill-session ; do
+ (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
+ {
+ _loginctl_all_sessions
+ compadd "$@" -a - _sys_all_sessions
+ }
+done
+
+# Completion functions for USERS
+for fun in user-status show-user enable-linger disable-linger terminate-user kill-user ; do
+ (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
+ {
+ _loginctl_all_users
+ compadd "$@" -a - _sys_all_users
+ }
+done
+
+# Completion functions for SEATS
+(( $+functions[_loginctl_seats] )) || _loginctl_seats()
+{
+ _loginctl_all_seats
+ compadd "$@" -a - _sys_all_seats
+}
+for fun in seat-status show-seat terminate-seat ; do
+ (( $+functions[_loginctl_$fun] )) || _loginctl_$fun()
+ { _loginctl_seats }
+done
+
+# Completion functions for ATTACH
+(( $+functions[_loginctl_attach] )) || _loginctl_attach()
+{
+ _loginctl_all_seats
+
+ _arguments -w -C -S -s \
+ ':seat:_loginctl_seats' \
+ '*:device:_files'
+}
+
+# no loginctl completion for:
+# [STANDALONE]='list-sessions list-users list-seats flush-devices'
+
+(( $+functions[_loginctl_command] )) || _loginctl_command()
+{
+ local -a _loginctl_cmds
+ _loginctl_cmds=(
+ "list-sessions:List sessions"
+ "session-status:Show session status"
+ "show-session:Show properties of one or more sessions"
+ "activate:Activate a session"
+ "lock-session:Screen lock one or more sessions"
+ "unlock-session:Screen unlock one or more sessions"
+ "terminate-session:Terminate one or more sessions"
+ "kill-session:Send signal to processes of a session"
+ "list-users:List users"
+ "user-status:Show user status"
+ "show-user:Show properties of one or more users"
+ "enable-linger:Enable linger state of one or more users"
+ "disable-linger:Disable linger state of one or more users"
+ "terminate-user:Terminate all sessions of one or more users"
+ "kill-user:Send signal to processes of a user"
+ "list-seats:List seats"
+ "seat-status:Show seat status"
+ "show-seat:Show properties of one or more seats"
+ "attach:Attach one or more devices to a seat"
+ "flush-devices:Flush all device associations"
+ "terminate-seat:Terminate all sessions on one or more seats"
+ )
+
+ if (( CURRENT == 1 )); then
+ _describe -t commands 'loginctl command' _loginctl_cmds || compadd "$@"
+ else
+ local curcontext="$curcontext"
+
+ cmd="${${_loginctl_cmds[(r)$words[1]:*]%%:*}}"
+
+ if (( $#cmd )); then
+ curcontext="${curcontext%:*:*}:loginctl-${cmd}:"
+
+ _call_function ret _loginctl_$cmd || _message 'no more arguments'
+ else
+ _message "unknown loginctl command: $words[1]"
+ fi
+ return ret
+ fi
+}
+
+_hostnamectl_command() {
+ local -a _hostnamectl_cmds
+ _hostnamectl_cmds=(
+ "status:Show current hostname settings"
+ "set-hostname:Set system hostname"
+ "set-icon-name:Set icon name for host"
+ )
+ if (( CURRENT == 1 )); then
+ _describe -t commands 'hostnamectl commands' _hostnamectl_cmds || compadd "$@"
+ else
+ local curcontext="$curcontext"
+ cmd="${${_hostnamectl_cmds[(r)$words[1]:*]%%:*}}"
+ if (( $#cmd )); then
+ [[ $cmd == status ]] && msg="no options" || msg="options for $cmd"
+ _message "$msg"
+ else
+ _message "unknown hostnamectl command: $words[1]"
+ fi
+ fi
+}
+
+_localectl_set-locale() {
+ local -a _confs _locales
+ local expl suf
+ _locales=( ${(f)"$(_call_program locales "$service" list-locales)"} )
+ _confs=( ${${(f)"$(_call_program confs "locale 2>/dev/null")"}%\=*} )
+ if [[ -prefix 1 *\= ]]; then
+ local conf=${PREFIX%%\=*}
+ compset -P1 '*='
+ _wanted locales expl "locales configs" \
+ _combination localeconfs confs=$conf locales "$@" -
+ else
+ compadd -S '=' $_confs
+ fi
+}
+
+_localectl_set-keymap() {
+ local -a _keymaps
+ _keymaps=( ${(f)"$(_call_program locales "$service" list-keymaps)"} )
+ if (( CURRENT <= 3 )); then
+ _describe keymaps _keymaps
+ else
+ _message "no more options"
+ fi
+}
+
+_localectl_set-x11-keymap() {
+ if (( $+commands[pkg-config] )); then
+ local -a _file _layout _model _variant _options
+ local _xorg_lst
+ _xorg_lst=${"$($commands[pkg-config] xkeyboard-config --variable=xkb_base)"}
+ _file=( ${(ps:\n\!:)"$(<$_xorg_lst/rules/xorg.lst)"} )
+ _layout=( ${${${(M)${(f)_file[1]}:# *}# }%% *} )
+ _model=( ${${${(M)${(f)_file[2]}:# *}# }%% *} )
+ _variant=( ${${${(M)${(f)_file[3]}:# *}# }%% *} )
+ _options=( ${${${(M)${(f)_file[4]}:# *}# }%% *} )
+ #_layout=( ${(f)"$( echo $_file[1] | awk '/^ / {print $1}' )"} )
+ #_model=( ${(f)"$(echo $_file[2] | awk '/^ / {print $1}')"} )
+ #_variant=( ${(f)"$(echo $_file[3] | awk '/^ / {print $1}')"} )
+ #_options=( ${(f)"$(echo ${_file[4]//:/\\:} | awk '/^ / {print $1}')"} )
+
+ case $CURRENT in
+ 2) _describe layouts _layout ;;
+ 3) _describe models _model;;
+ 4) _describe variants _variant;;
+ 5) _describe options _options;;
+ *) _message "no more options"
+ esac
+ fi
+}
+
+
+_localectl_command() {
+ local -a _localectl_cmds
+ _localectl_cmds=(
+ 'status:Show current locale settings'
+ 'set-locale:Set system locale'
+ 'list-locales:Show known locales'
+ 'set-keymap:Set virtual console keyboard mapping'
+ 'list-keymaps:Show known virtual console keyboard mappings'
+ 'set-x11-keymap:Set X11 keyboard mapping'
+ )
+ if (( CURRENT == 1 )); then
+ _describe -t commands 'localectl command' _localectl_cmds
+ else
+ local curcontext="$curcontext"
+ cmd="${${_localectl_cmds[(r)$words[1]:*]%%:*}}"
+ if (( $+functions[_localectl_$cmd] )); then
+ _localectl_$cmd
+ else
+ _message "no more options"
+ fi
+ fi
+}
+
+_timedatectl_set-timezone(){
+ local -a _timezones
+ _timezones=( ${(f)"$(_call_program timezones "${service}" list-timezones)"} )
+ compadd "$_timezones[@]"
+}
+
+_timedatectl_set-time(){
+ _message "YYYY-MM-DD HH:MM:SS"
+}
+
+_timedatectl_set-local-rtc(){
+ local -a _options
+ _options=(
+ '0:Maintain RTC in universal time'
+ '1:Maintain RTC in local time'
+ )
+ _describe options _options
+}
+
+_timedatectl_set-ntp(){
+ local -a _options
+ _options=(
+ '0:Disable NTP based network time configuration'
+ '1:Enable NTP based network time configuration'
+ )
+ _describe options _options
+}
+
+_timedatectl_command(){
+ local -a _timedatectl_cmds
+ _timedatectl_cmds=(
+ 'status:Show current time settings'
+ 'set-time:Set system time'
+ 'set-timezone:Set system timezone'
+ 'list-timezones:Show known timezones'
+ 'set-local-rtc:Control whether RTC is in local time'
+ 'set-ntp:Control whether NTP is enabled'
+ )
+ if (( CURRENT == 1 )); then
+ _describe -t commands 'timedatectl command' _timedatectl_cmds
+ else
+ local curcontext="$curcontext"
+ cmd="${${_timedatectl_cmds[(r)$words[1]:*]%%:*}}"
+ if (( $#cmd )); then
+ if (( $+functions[_timedatectl_$cmd] )); then
+ _timedatectl_$cmd
+ else
+ _message "no more options"
+ fi
+ else
+ _message "unknown timedatectl command: $words[1]"
+ fi
+ fi
+}
+_systemd-coredumpctl_command(){
+ local -a _systemd_coredumpctl_cmds
+ _systemd_coredumpctl_cmds=(
+ 'list:List available coredumps'
+ 'dump:Print coredump to std'
+ )
+ if (( CURRENT == 1 )); then
+ _describe -t commands 'systemd-coredumpctl command' _systemd_coredumpctl_cmds
+ else
+ local curcontext="$curcontext"
+ local -a dumps
+ cmd="${${_systemd_coredumpctl_cmds[(r)$words[1]:*]%%:*}}"
+ if (( $#cmd )); then
+ dumps=( "${(f)$(_call_program dumps "systemd-coredumpctl list 2>/dev/null")}" )
+ if [[ -n "$dumps" ]]; then
+ compadd "${dumps[@]}"
+ else
+ _message "no coredumps"
+ fi
+ else
+ _message "no more options"
+ fi
+
+ fi
+
+}
+
+_udevadm_info(){
+ _arguments \
+ '--query=[Query the database for specified type of device data. It needs the --path or --name to identify the specified device.]:type:(name symlink path property all)' \
+ '--path=[The devpath of the device to query.]:sys files:_files -P /sys/ -W /sys' \
+ '--name=[The name of the device node or a symlink to query]:device files:_files -P /dev/ -W /dev' \
+ '--root[Print absolute paths in name or symlink query.]' \
+ '--attribute-walk[Print all sysfs properties of the specified device that can be used in udev rules to match the specified device]' \
+ '--export[Print output as key/value pairs.]' \
+ '--export-prefix=[Add a prefix to the key name of exported values.]:prefix' \
+ '--device-id-of-file=[Print major/minor numbers of the underlying device, where the file lives on.]:files:_udevadm_mounts' \
+ '--export-db[Export the content of the udev database.]' \
+ '--cleanup-db[Cleanup the udev database.]'
+}
+
+_udevadm_trigger(){
+ _arguments \
+ '--verbose[Print the list of devices which will be triggered.]' \
+ '--dry-run[Do not actually trigger the event.]' \
+ '--type=[Trigger a specific type of devices.]:types:(devices subsystems failed)' \
+ '--action=[Type of event to be triggered.]:actions:(add change remove)' \
+ '--subsystem-match=[Trigger events for devices which belong to a matching subsystem.]' \
+ '--subsystem-nomatch=[Do not trigger events for devices which belong to a matching subsystem.]' \
+ '--attr-match=attribute=[Trigger events for devices with a matching sysfs attribute.]' \
+ '--attr-nomatch=attribute=[Do not trigger events for devices with a matching sysfs attribute.]' \
+ '--property-match=[Trigger events for devices with a matching property value.]' \
+ '--tag-match=property[Trigger events for devices with a matching tag.]' \
+ '--sysname-match=[Trigger events for devices with a matching sys device name.]' \
+ '--parent-match=[Trigger events for all children of a given device.]'
+}
+
+_udevadm_settle(){
+ _arguments \
+ '--timeout=[Maximum number of seconds to wait for the event queue to become empty.]' \
+ '--seq-start=[Wait only for events after the given sequence number.]' \
+ '--seq-end=[Wait only for events before the given sequence number.]' \
+ '--exit-if-exists=[Stop waiting if file exists.]:files:_files' \
+ '--quiet[Do not print any output, like the remaining queue entries when reaching the timeout.]' \
+ '--help[Print help text.]'
+}
+
+_udevadm_control(){
+ _arguments \
+ '--exit[Signal and wait for systemd-udevd to exit.]' \
+ '--log-priority=[Set the internal log level of systemd-udevd.]:priorities:(err info debug)' \
+ '--stop-exec-queue[Signal systemd-udevd to stop executing new events. Incoming events will be queued.]' \
+ '--start-exec-queue[Signal systemd-udevd to enable the execution of events.]' \
+ '--reload[Signal systemd-udevd to reload the rules files and other databases like the kernel module index.]' \
+ '--property=[Set a global property for all events.]' \
+ '--children-max=[Set the maximum number of events.]' \
+ '--timeout=[The maximum number of seconds to wait for a reply from systemd-udevd.]' \
+ '--help[Print help text.]'
+}
+
+_udevadm_monitor(){
+ _arguments \
+ '--kernel[Print the kernel uevents.]' \
+ '--udev[Print the udev event after the rule processing.]' \
+ '--property[Also print the properties of the event.]' \
+ '--subsystem-match=[Filter events by subsystem[/devtype].]' \
+ '--tag-match=[Filter events by property.]' \
+ '--help[Print help text.]'
+}
+
+_udevadm_test(){
+ _arguments \
+ '--action=[The action string.]:actions:(add change remove)' \
+ '--subsystem=[The subsystem string.]' \
+ '--help[Print help text.]' \
+ '*::devpath:_files -P /sys/ -W /sys'
+}
+
+_udevadm_test-builtin(){
+ if (( CURRENT == 2 )); then
+ _arguments \
+ '--help[Print help text]' \
+ '*::builtins:(blkid btrfs firmware hwdb input_id kmod path_id usb_id uaccess)'
+ elif (( CURRENT == 3 )); then
+ _arguments \
+ '--help[Print help text]' \
+ '*::syspath:_files -P /sys -W /sys'
+ else
+ _arguments \
+ '--help[Print help text]'
+ fi
+}
+
+_udevadm_mounts(){
+ local dev_tmp dpath_tmp mp_tmp mline
+
+ tmp=( "${(@f)$(< /etc/mtab)}" )
+ dev_tmp=( "${(@)${(@)tmp%% *}:#none}" )
+ mp_tmp=( "${(@)${(@)tmp#* }%% *}" )
+
+ local MATCH
+ mp_tmp=("${(@q)mp_tmp//(#m)\\[0-7](#c3)/${(#)$(( 8#${MATCH[2,-1]} ))}}")
+ dpath_tmp=( "${(@Mq)dev_tmp:#/*}" )
+ dev_tmp=( "${(@q)dev_tmp:#/*}" )
+
+ _alternative \
+ 'device-paths: device path:compadd -a dpath_tmp' \
+ 'directories:mount point:compadd -a mp_tmp'
+}
+
+
+_udevadm_command(){
+ local -a _udevadm_cmds
+ _udevadm_cmds=(
+ 'info:query sysfs or the udev database'
+ 'trigger:request events from the kernel'
+ 'settle:wait for the event queue to finish'
+ 'control:control the udev daemon'
+ 'monitor:listen to kernel and udev events'
+ 'test:test an event run'
+ 'test-builtin:test a built-in command'
+ )
+
+ if ((CURRENT == 1)); then
+ _describe -t commands 'udevadm commands' _udevadm_cmds
+ else
+ local curcontext="$curcontext"
+ cmd="${${_udevadm_cmds[(r)$words[1]:*]%%:*}}"
+ if (($#cmd)); then
+ if (( $+functions[_udevadm_$cmd] )); then
+ _udevadm_$cmd
+ else
+ _message "no options for $cmd"
+ fi
+ else
+ _message "no more options"
+ fi
+ fi
+}
+
+_ctls "$@"
+
+#vim: set ft=zsh sw=4 ts=4 et