diff options
Diffstat (limited to 'src/grp-system/grp-utils/systemd-analyze/systemd-analyze.xml')
| -rw-r--r-- | src/grp-system/grp-utils/systemd-analyze/systemd-analyze.xml | 388 |
1 files changed, 388 insertions, 0 deletions
diff --git a/src/grp-system/grp-utils/systemd-analyze/systemd-analyze.xml b/src/grp-system/grp-utils/systemd-analyze/systemd-analyze.xml new file mode 100644 index 0000000000..bc37765dff --- /dev/null +++ b/src/grp-system/grp-utils/systemd-analyze/systemd-analyze.xml @@ -0,0 +1,388 @@ +<?xml version='1.0'?> <!--*-nxml-*--> +<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" + "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd"> + +<!-- + This file is part of systemd. + + Copyright 2012 Lennart Poettering + + systemd is free software; you can redistribute it and/or modify it + under the terms of the GNU Lesser General Public License as published by + the Free Software Foundation; either version 2.1 of the License, or + (at your option) any later version. + + systemd is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public License + along with systemd; If not, see <http://www.gnu.org/licenses/>. +--> + +<refentry id="systemd-analyze" + xmlns:xi="http://www.w3.org/2001/XInclude"> + + <refentryinfo> + <title>systemd-analyze</title> + <productname>systemd</productname> + + <authorgroup> + <author> + <contrib>Developer</contrib> + <firstname>Lennart</firstname> + <surname>Poettering</surname> + <email>lennart@poettering.net</email> + </author> + <author> + <contrib>Developer</contrib> + <firstname>Harald</firstname> + <surname>Hoyer</surname> + <email>harald@redhat.com</email> + </author> + </authorgroup> + </refentryinfo> + + <refmeta> + <refentrytitle>systemd-analyze</refentrytitle> + <manvolnum>1</manvolnum> + </refmeta> + + <refnamediv> + <refname>systemd-analyze</refname> + <refpurpose>Analyze system boot-up performance</refpurpose> + </refnamediv> + + <refsynopsisdiv> + <cmdsynopsis> + <command>systemd-analyze</command> + <arg choice="opt" rep="repeat">OPTIONS</arg> + <arg>time</arg> + </cmdsynopsis> + <cmdsynopsis> + <command>systemd-analyze</command> + <arg choice="opt" rep="repeat">OPTIONS</arg> + <arg choice="plain">blame</arg> + </cmdsynopsis> + <cmdsynopsis> + <command>systemd-analyze</command> + <arg choice="opt" rep="repeat">OPTIONS</arg> + <arg choice="plain">critical-chain</arg> + <arg choice="opt" rep="repeat"><replaceable>UNIT</replaceable></arg> + </cmdsynopsis> + <cmdsynopsis> + <command>systemd-analyze</command> + <arg choice="opt" rep="repeat">OPTIONS</arg> + <arg choice="plain">plot</arg> + <arg choice="opt">> file.svg</arg> + </cmdsynopsis> + <cmdsynopsis> + <command>systemd-analyze</command> + <arg choice="opt" rep="repeat">OPTIONS</arg> + <arg choice="plain">dot</arg> + <arg choice="opt" rep="repeat"><replaceable>PATTERN</replaceable></arg> + <arg choice="opt">> file.dot</arg> + </cmdsynopsis> + <cmdsynopsis> + <command>systemd-analyze</command> + <arg choice="opt" rep="repeat">OPTIONS</arg> + <arg choice="plain">dump</arg> + </cmdsynopsis> + <cmdsynopsis> + <command>systemd-analyze</command> + <arg choice="opt" rep="repeat">OPTIONS</arg> + <arg choice="plain">set-log-level</arg> + <arg choice="plain"><replaceable>LEVEL</replaceable></arg> + </cmdsynopsis> + <cmdsynopsis> + <command>systemd-analyze</command> + <arg choice="opt" rep="repeat">OPTIONS</arg> + <arg choice="plain">set-log-target</arg> + <arg choice="plain"><replaceable>TARGET</replaceable></arg> + </cmdsynopsis> + <cmdsynopsis> + <command>systemd-analyze</command> + <arg choice="opt" rep="repeat">OPTIONS</arg> + <arg choice="plain">verify</arg> + <arg choice="opt" rep="repeat"><replaceable>FILES</replaceable></arg> + </cmdsynopsis> + </refsynopsisdiv> + + <refsect1> + <title>Description</title> + + <para><command>systemd-analyze</command> may be used to determine + system boot-up performance statistics and retrieve other state and + tracing information from the system and service manager, and to + verify the correctness of unit files.</para> + + <para><command>systemd-analyze time</command> prints the time + spent in the kernel before userspace has been reached, the time + spent in the initial RAM disk (initrd) before normal system + userspace has been reached, and the time normal system userspace + took to initialize. Note that these measurements simply measure + the time passed up to the point where all system services have + been spawned, but not necessarily until they fully finished + initialization or the disk is idle.</para> + + <para><command>systemd-analyze blame</command> prints a list of + all running units, ordered by the time they took to initialize. + This information may be used to optimize boot-up times. Note that + the output might be misleading as the initialization of one + service might be slow simply because it waits for the + initialization of another service to complete.</para> + + <para><command>systemd-analyze critical-chain + [<replaceable>UNIT...</replaceable>]</command> prints a tree of + the time-critical chain of units (for each of the specified + <replaceable>UNIT</replaceable>s or for the default target + otherwise). The time after the unit is active or started is + printed after the "@" character. The time the unit takes to start + is printed after the "+" character. Note that the output might be + misleading as the initialization of one service might depend on + socket activation and because of the parallel execution of + units.</para> + + <para><command>systemd-analyze plot</command> prints an SVG + graphic detailing which system services have been started at what + time, highlighting the time they spent on initialization.</para> + + <para><command>systemd-analyze dot</command> generates textual + dependency graph description in dot format for further processing + with the GraphViz + <citerefentry project='die-net'><refentrytitle>dot</refentrytitle><manvolnum>1</manvolnum></citerefentry> + tool. Use a command line like <command>systemd-analyze dot | dot + -Tsvg > systemd.svg</command> to generate a graphical dependency + tree. Unless <option>--order</option> or + <option>--require</option> is passed, the generated graph will + show both ordering and requirement dependencies. Optional pattern + globbing style specifications (e.g. <filename>*.target</filename>) + may be given at the end. A unit dependency is included in the + graph if any of these patterns match either the origin or + destination node.</para> + + <para><command>systemd-analyze dump</command> outputs a (usually + very long) human-readable serialization of the complete server + state. Its format is subject to change without notice and should + not be parsed by applications.</para> + + <para><command>systemd-analyze set-log-level + <replaceable>LEVEL</replaceable></command> changes the current log + level of the <command>systemd</command> daemon to + <replaceable>LEVEL</replaceable> (accepts the same values as + <option>--log-level=</option> described in + <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>).</para> + + <para><command>systemd-analyze set-log-target + <replaceable>TARGET</replaceable></command> changes the current log + target of the <command>systemd</command> daemon to + <replaceable>TARGET</replaceable> (accepts the same values as + <option>--log-target=</option>, described in + <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>).</para> + + <para><command>systemd-analyze verify</command> will load unit + files and print warnings if any errors are detected. Files + specified on the command line will be loaded, but also any other + units referenced by them. This command works by prepending the + directories for all command line arguments at the beginning of the + unit load path, which means that all units files found in those + directories will be used in preference to the unit files found in + the standard locations, even if not listed explicitly.</para> + + <para>If no command is passed, <command>systemd-analyze + time</command> is implied.</para> + + </refsect1> + + <refsect1> + <title>Options</title> + + <para>The following options are understood:</para> + + <variablelist> + <varlistentry> + <term><option>--user</option></term> + + <listitem><para>Operates on the user systemd + instance.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--system</option></term> + + <listitem><para>Operates on the system systemd instance. This + is the implied default.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--order</option></term> + <term><option>--require</option></term> + + <listitem><para>When used in conjunction with the + <command>dot</command> command (see above), selects which + dependencies are shown in the dependency graph. If + <option>--order</option> is passed, only dependencies of type + <varname>After=</varname> or <varname>Before=</varname> are + shown. If <option>--require</option> is passed, only + dependencies of type <varname>Requires=</varname>, + <varname>Requisite=</varname>, + <varname>Wants=</varname> and <varname>Conflicts=</varname> + are shown. If neither is passed, this shows dependencies of + all these types.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--from-pattern=</option></term> + <term><option>--to-pattern=</option></term> + + <listitem><para>When used in conjunction with the + <command>dot</command> command (see above), this selects which + relationships are shown in the dependency graph. Both options + require a + <citerefentry project='die-net'><refentrytitle>glob</refentrytitle><manvolnum>7</manvolnum></citerefentry> + pattern as an argument, which will be matched against the + left-hand and the right-hand, respectively, nodes of a + relationship.</para> + + <para>Each of these can be used more than once, in which case + the unit name must match one of the values. When tests for + both sides of the relation are present, a relation must pass + both tests to be shown. When patterns are also specified as + positional arguments, they must match at least one side of the + relation. In other words, patterns specified with those two + options will trim the list of edges matched by the positional + arguments, if any are given, and fully determine the list of + edges shown otherwise.</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--fuzz=</option><replaceable>timespan</replaceable></term> + + <listitem><para>When used in conjunction with the + <command>critical-chain</command> command (see above), also + show units, which finished <replaceable>timespan</replaceable> + earlier, than the latest unit in the same level. The unit of + <replaceable>timespan</replaceable> is seconds unless + specified with a different unit, e.g. + "50ms".</para></listitem> + </varlistentry> + + <varlistentry> + <term><option>--no-man</option></term> + + <listitem><para>Do not invoke man to verify the existence of + man pages listed in <varname>Documentation=</varname>. + </para></listitem> + </varlistentry> + + <xi:include href="user-system-options.xml" xpointer="host" /> + <xi:include href="user-system-options.xml" xpointer="machine" /> + + <xi:include href="standard-options.xml" xpointer="help" /> + <xi:include href="standard-options.xml" xpointer="version" /> + <xi:include href="standard-options.xml" xpointer="no-pager" /> + </variablelist> + + </refsect1> + + <refsect1> + <title>Exit status</title> + + <para>On success, 0 is returned, a non-zero failure code + otherwise.</para> + </refsect1> + + <refsect1> + <title>Examples for <command>dot</command></title> + + <example> + <title>Plots all dependencies of any unit whose name starts with + <literal>avahi-daemon</literal></title> + + <programlisting>$ systemd-analyze dot 'avahi-daemon.*' | dot -Tsvg > avahi.svg + $ eog avahi.svg</programlisting> + </example> + + <example> + <title>Plots the dependencies between all known target units</title> + + <programlisting>systemd-analyze dot --to-pattern='*.target' --from-pattern='*.target' | dot -Tsvg > targets.svg +$ eog targets.svg</programlisting> + </example> + </refsect1> + + <refsect1> + <title>Examples for <command>verify</command></title> + + <para>The following errors are currently detected:</para> + <itemizedlist> + <listitem><para>unknown sections and directives, + </para></listitem> + + <listitem><para>missing dependencies which are required to start + the given unit, </para></listitem> + + <listitem><para>man pages listed in + <varname>Documentation=</varname> which are not found in the + system,</para></listitem> + + <listitem><para>commands listed in <varname>ExecStart=</varname> + and similar which are not found in the system or not + executable.</para></listitem> + </itemizedlist> + + <example> + <title>Misspelt directives</title> + + <programlisting>$ cat ./user.slice +[Unit] +WhatIsThis=11 +Documentation=man:nosuchfile(1) +Requires=different.service + +[Service] +Desription=x + +$ systemd-analyze verify ./user.slice +[./user.slice:9] Unknown lvalue 'WhatIsThis' in section 'Unit' +[./user.slice:13] Unknown section 'Service'. Ignoring. +Error: org.freedesktop.systemd1.LoadFailed: + Unit different.service failed to load: + No such file or directory. +Failed to create user.slice/start: Invalid argument +user.slice: man nosuchfile(1) command failed with code 16 + </programlisting> + </example> + + <example> + <title>Missing service units</title> + + <programlisting>$ tail ./a.socket ./b.socket +==> ./a.socket <== +[Socket] +ListenStream=100 + +==> ./b.socket <== +[Socket] +ListenStream=100 +Accept=yes + +$ systemd-analyze verify ./a.socket ./b.socket +Service a.service not loaded, a.socket cannot be started. +Service b@0.service not loaded, b.socket cannot be started. + </programlisting> + </example> + </refsect1> + + <xi:include href="less-variables.xml" /> + + <refsect1> + <title>See Also</title> + <para> + <citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>, + <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry> + </para> + </refsect1> + +</refentry> |