summaryrefslogtreecommitdiff
path: root/src/grp-udev/scsi_id
diff options
context:
space:
mode:
Diffstat (limited to 'src/grp-udev/scsi_id')
-rw-r--r--src/grp-udev/scsi_id/.gitignore1
-rw-r--r--src/grp-udev/scsi_id/Makefile41
-rw-r--r--src/grp-udev/scsi_id/README4
-rw-r--r--src/grp-udev/scsi_id/scsi.h99
-rw-r--r--src/grp-udev/scsi_id/scsi_id.c625
-rw-r--r--src/grp-udev/scsi_id/scsi_id.h75
-rw-r--r--src/grp-udev/scsi_id/scsi_serial.c964
7 files changed, 1809 insertions, 0 deletions
diff --git a/src/grp-udev/scsi_id/.gitignore b/src/grp-udev/scsi_id/.gitignore
new file mode 100644
index 0000000000..6aebddd809
--- /dev/null
+++ b/src/grp-udev/scsi_id/.gitignore
@@ -0,0 +1 @@
+scsi_id_version.h
diff --git a/src/grp-udev/scsi_id/Makefile b/src/grp-udev/scsi_id/Makefile
new file mode 100644
index 0000000000..7064a864f7
--- /dev/null
+++ b/src/grp-udev/scsi_id/Makefile
@@ -0,0 +1,41 @@
+# -*- Mode: makefile; indent-tabs-mode: t -*-
+#
+# This file is part of systemd.
+#
+# Copyright 2010-2012 Lennart Poettering
+# Copyright 2010-2012 Kay Sievers
+# Copyright 2013 Zbigniew Jędrzejewski-Szmek
+# Copyright 2013 David Strauss
+# Copyright 2016 Luke Shumaker
+#
+# systemd is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2.1 of the License, or
+# (at your option) any later version.
+#
+# systemd is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with systemd; If not, see <http://www.gnu.org/licenses/>.
+include $(dir $(lastword $(MAKEFILE_LIST)))/../../../config.mk
+include $(topsrcdir)/build-aux/Makefile.head.mk
+
+scsi_id_SOURCES =\
+ src/udev/scsi_id/scsi_id.c \
+ src/udev/scsi_id/scsi_serial.c \
+ src/udev/scsi_id/scsi.h \
+ src/udev/scsi_id/scsi_id.h
+
+scsi_id_LDADD = \
+ libshared.la
+
+udevlibexec_PROGRAMS += \
+ scsi_id
+
+EXTRA_DIST += \
+ src/udev/scsi_id/README
+
+include $(topsrcdir)/build-aux/Makefile.tail.mk
diff --git a/src/grp-udev/scsi_id/README b/src/grp-udev/scsi_id/README
new file mode 100644
index 0000000000..9cfe73991c
--- /dev/null
+++ b/src/grp-udev/scsi_id/README
@@ -0,0 +1,4 @@
+scsi_id - generate a SCSI unique identifier for a given SCSI device
+
+Please send questions, comments or patches to <patmans@us.ibm.com> or
+<linux-hotplug-devel@lists.sourceforge.net>.
diff --git a/src/grp-udev/scsi_id/scsi.h b/src/grp-udev/scsi_id/scsi.h
new file mode 100644
index 0000000000..a27a84a40a
--- /dev/null
+++ b/src/grp-udev/scsi_id/scsi.h
@@ -0,0 +1,99 @@
+#pragma once
+
+/*
+ * scsi.h
+ *
+ * General scsi and linux scsi specific defines and structs.
+ *
+ * Copyright (C) IBM Corp. 2003
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation version 2 of the License.
+ */
+
+#include <scsi/scsi.h>
+
+struct scsi_ioctl_command {
+ unsigned int inlen; /* excluding scsi command length */
+ unsigned int outlen;
+ unsigned char data[1];
+ /* on input, scsi command starts here then opt. data */
+};
+
+/*
+ * Default 5 second timeout
+ */
+#define DEF_TIMEOUT 5000
+
+#define SENSE_BUFF_LEN 32
+
+/*
+ * The request buffer size passed to the SCSI INQUIRY commands, use 254,
+ * as this is a nice value for some devices, especially some of the usb
+ * mass storage devices.
+ */
+#define SCSI_INQ_BUFF_LEN 254
+
+/*
+ * SCSI INQUIRY vendor and model (really product) lengths.
+ */
+#define VENDOR_LENGTH 8
+#define MODEL_LENGTH 16
+
+#define INQUIRY_CMD 0x12
+#define INQUIRY_CMDLEN 6
+
+/*
+ * INQUIRY VPD page 0x83 identifier descriptor related values. Reference the
+ * SCSI Primary Commands specification for details.
+ */
+
+/*
+ * id type values of id descriptors. These are assumed to fit in 4 bits.
+ */
+#define SCSI_ID_VENDOR_SPECIFIC 0
+#define SCSI_ID_T10_VENDOR 1
+#define SCSI_ID_EUI_64 2
+#define SCSI_ID_NAA 3
+#define SCSI_ID_RELPORT 4
+#define SCSI_ID_TGTGROUP 5
+#define SCSI_ID_LUNGROUP 6
+#define SCSI_ID_MD5 7
+#define SCSI_ID_NAME 8
+
+/*
+ * Supported NAA values. These fit in 4 bits, so the "don't care" value
+ * cannot conflict with real values.
+ */
+#define SCSI_ID_NAA_DONT_CARE 0xff
+#define SCSI_ID_NAA_IEEE_REG 0x05
+#define SCSI_ID_NAA_IEEE_REG_EXTENDED 0x06
+
+/*
+ * Supported Code Set values.
+ */
+#define SCSI_ID_BINARY 1
+#define SCSI_ID_ASCII 2
+
+struct scsi_id_search_values {
+ u_char id_type;
+ u_char naa_type;
+ u_char code_set;
+};
+
+/*
+ * Following are the "true" SCSI status codes. Linux has traditionally
+ * used a 1 bit right and masked version of these. So now CHECK_CONDITION
+ * and friends (in <scsi/scsi.h>) are deprecated.
+ */
+#define SCSI_CHECK_CONDITION 0x02
+#define SCSI_CONDITION_MET 0x04
+#define SCSI_BUSY 0x08
+#define SCSI_IMMEDIATE 0x10
+#define SCSI_IMMEDIATE_CONDITION_MET 0x14
+#define SCSI_RESERVATION_CONFLICT 0x18
+#define SCSI_COMMAND_TERMINATED 0x22
+#define SCSI_TASK_SET_FULL 0x28
+#define SCSI_ACA_ACTIVE 0x30
+#define SCSI_TASK_ABORTED 0x40
diff --git a/src/grp-udev/scsi_id/scsi_id.c b/src/grp-udev/scsi_id/scsi_id.c
new file mode 100644
index 0000000000..4655691642
--- /dev/null
+++ b/src/grp-udev/scsi_id/scsi_id.c
@@ -0,0 +1,625 @@
+/*
+ * Copyright (C) IBM Corp. 2003
+ * Copyright (C) SUSE Linux Products GmbH, 2006
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <getopt.h>
+#include <signal.h>
+#include <stdarg.h>
+#include <stdbool.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/stat.h>
+#include <unistd.h>
+
+#include "libudev.h"
+
+#include "fd-util.h"
+#include "libudev-private.h"
+#include "scsi_id.h"
+#include "string-util.h"
+#include "udev-util.h"
+
+static const struct option options[] = {
+ { "device", required_argument, NULL, 'd' },
+ { "config", required_argument, NULL, 'f' },
+ { "page", required_argument, NULL, 'p' },
+ { "blacklisted", no_argument, NULL, 'b' },
+ { "whitelisted", no_argument, NULL, 'g' },
+ { "replace-whitespace", no_argument, NULL, 'u' },
+ { "sg-version", required_argument, NULL, 's' },
+ { "verbose", no_argument, NULL, 'v' },
+ { "version", no_argument, NULL, 'V' }, /* don't advertise -V */
+ { "export", no_argument, NULL, 'x' },
+ { "help", no_argument, NULL, 'h' },
+ {}
+};
+
+static bool all_good = false;
+static bool dev_specified = false;
+static char config_file[MAX_PATH_LEN] = "/etc/scsi_id.config";
+static enum page_code default_page_code = PAGE_UNSPECIFIED;
+static int sg_version = 4;
+static bool reformat_serial = false;
+static bool export = false;
+static char vendor_str[64];
+static char model_str[64];
+static char vendor_enc_str[256];
+static char model_enc_str[256];
+static char revision_str[16];
+static char type_str[16];
+
+static void set_type(const char *from, char *to, size_t len)
+{
+ int type_num;
+ char *eptr;
+ const char *type = "generic";
+
+ type_num = strtoul(from, &eptr, 0);
+ if (eptr != from) {
+ switch (type_num) {
+ case 0:
+ type = "disk";
+ break;
+ case 1:
+ type = "tape";
+ break;
+ case 4:
+ type = "optical";
+ break;
+ case 5:
+ type = "cd";
+ break;
+ case 7:
+ type = "optical";
+ break;
+ case 0xe:
+ type = "disk";
+ break;
+ case 0xf:
+ type = "optical";
+ break;
+ default:
+ break;
+ }
+ }
+ strscpy(to, len, type);
+}
+
+/*
+ * get_value:
+ *
+ * buf points to an '=' followed by a quoted string ("foo") or a string ending
+ * with a space or ','.
+ *
+ * Return a pointer to the NUL terminated string, returns NULL if no
+ * matches.
+ */
+static char *get_value(char **buffer)
+{
+ static const char *quote_string = "\"\n";
+ static const char *comma_string = ",\n";
+ char *val;
+ const char *end;
+
+ if (**buffer == '"') {
+ /*
+ * skip leading quote, terminate when quote seen
+ */
+ (*buffer)++;
+ end = quote_string;
+ } else {
+ end = comma_string;
+ }
+ val = strsep(buffer, end);
+ if (val && end == quote_string)
+ /*
+ * skip trailing quote
+ */
+ (*buffer)++;
+
+ while (isspace(**buffer))
+ (*buffer)++;
+
+ return val;
+}
+
+static int argc_count(char *opts)
+{
+ int i = 0;
+ while (*opts != '\0')
+ if (*opts++ == ' ')
+ i++;
+ return i;
+}
+
+/*
+ * get_file_options:
+ *
+ * If vendor == NULL, find a line in the config file with only "OPTIONS=";
+ * if vendor and model are set find the first OPTIONS line in the config
+ * file that matches. Set argc and argv to match the OPTIONS string.
+ *
+ * vendor and model can end in '\n'.
+ */
+static int get_file_options(struct udev *udev,
+ const char *vendor, const char *model,
+ int *argc, char ***newargv)
+{
+ char *buffer;
+ _cleanup_fclose_ FILE *f;
+ char *buf;
+ char *str1;
+ char *vendor_in, *model_in, *options_in; /* read in from file */
+ int lineno;
+ int c;
+ int retval = 0;
+
+ f = fopen(config_file, "re");
+ if (f == NULL) {
+ if (errno == ENOENT)
+ return 1;
+ else {
+ log_error_errno(errno, "can't open %s: %m", config_file);
+ return -1;
+ }
+ }
+
+ /*
+ * Allocate a buffer rather than put it on the stack so we can
+ * keep it around to parse any options (any allocated newargv
+ * points into this buffer for its strings).
+ */
+ buffer = malloc(MAX_BUFFER_LEN);
+ if (!buffer)
+ return log_oom();
+
+ *newargv = NULL;
+ lineno = 0;
+ for (;;) {
+ vendor_in = model_in = options_in = NULL;
+
+ buf = fgets(buffer, MAX_BUFFER_LEN, f);
+ if (buf == NULL)
+ break;
+ lineno++;
+ if (buf[strlen(buffer) - 1] != '\n') {
+ log_error("Config file line %d too long", lineno);
+ break;
+ }
+
+ while (isspace(*buf))
+ buf++;
+
+ /* blank or all whitespace line */
+ if (*buf == '\0')
+ continue;
+
+ /* comment line */
+ if (*buf == '#')
+ continue;
+
+ str1 = strsep(&buf, "=");
+ if (str1 && strcaseeq(str1, "VENDOR")) {
+ str1 = get_value(&buf);
+ if (!str1) {
+ retval = log_oom();
+ break;
+ }
+ vendor_in = str1;
+
+ str1 = strsep(&buf, "=");
+ if (str1 && strcaseeq(str1, "MODEL")) {
+ str1 = get_value(&buf);
+ if (!str1) {
+ retval = log_oom();
+ break;
+ }
+ model_in = str1;
+ str1 = strsep(&buf, "=");
+ }
+ }
+
+ if (str1 && strcaseeq(str1, "OPTIONS")) {
+ str1 = get_value(&buf);
+ if (!str1) {
+ retval = log_oom();
+ break;
+ }
+ options_in = str1;
+ }
+
+ /*
+ * Only allow: [vendor=foo[,model=bar]]options=stuff
+ */
+ if (!options_in || (!vendor_in && model_in)) {
+ log_error("Error parsing config file line %d '%s'", lineno, buffer);
+ retval = -1;
+ break;
+ }
+ if (vendor == NULL) {
+ if (vendor_in == NULL)
+ break;
+ } else if (vendor_in &&
+ strneq(vendor, vendor_in, strlen(vendor_in)) &&
+ (!model_in ||
+ (strneq(model, model_in, strlen(model_in))))) {
+ /*
+ * Matched vendor and optionally model.
+ *
+ * Note: a short vendor_in or model_in can
+ * give a partial match (that is FOO
+ * matches FOOBAR).
+ */
+ break;
+ }
+ }
+
+ if (retval == 0) {
+ if (vendor_in != NULL || model_in != NULL ||
+ options_in != NULL) {
+ /*
+ * Something matched. Allocate newargv, and store
+ * values found in options_in.
+ */
+ strcpy(buffer, options_in);
+ c = argc_count(buffer) + 2;
+ *newargv = calloc(c, sizeof(**newargv));
+ if (!*newargv)
+ retval = log_oom();
+ else {
+ *argc = c;
+ c = 0;
+ /*
+ * argv[0] at 0 is skipped by getopt, but
+ * store the buffer address there for
+ * later freeing
+ */
+ (*newargv)[c] = buffer;
+ for (c = 1; c < *argc; c++)
+ (*newargv)[c] = strsep(&buffer, " \t");
+ }
+ } else {
+ /* No matches */
+ retval = 1;
+ }
+ }
+ if (retval != 0)
+ free(buffer);
+ return retval;
+}
+
+static void help(void) {
+ printf("Usage: %s [OPTION...] DEVICE\n\n"
+ "SCSI device identification.\n\n"
+ " -h --help Print this message\n"
+ " --version Print version of the program\n\n"
+ " -d --device= Device node for SG_IO commands\n"
+ " -f --config= Location of config file\n"
+ " -p --page=0x80|0x83|pre-spc3-83 SCSI page (0x80, 0x83, pre-spc3-83)\n"
+ " -s --sg-version=3|4 Use SGv3 or SGv4\n"
+ " -b --blacklisted Treat device as blacklisted\n"
+ " -g --whitelisted Treat device as whitelisted\n"
+ " -u --replace-whitespace Replace all whitespace by underscores\n"
+ " -v --verbose Verbose logging\n"
+ " -x --export Print values as environment keys\n"
+ , program_invocation_short_name);
+
+}
+
+static int set_options(struct udev *udev,
+ int argc, char **argv,
+ char *maj_min_dev)
+{
+ int option;
+
+ /*
+ * optind is a global extern used by getopt. Since we can call
+ * set_options twice (once for command line, and once for config
+ * file) we have to reset this back to 1.
+ */
+ optind = 1;
+ while ((option = getopt_long(argc, argv, "d:f:gp:uvVxh", options, NULL)) >= 0)
+ switch (option) {
+ case 'b':
+ all_good = false;
+ break;
+
+ case 'd':
+ dev_specified = true;
+ strscpy(maj_min_dev, MAX_PATH_LEN, optarg);
+ break;
+
+ case 'f':
+ strscpy(config_file, MAX_PATH_LEN, optarg);
+ break;
+
+ case 'g':
+ all_good = true;
+ break;
+
+ case 'h':
+ help();
+ exit(0);
+
+ case 'p':
+ if (streq(optarg, "0x80"))
+ default_page_code = PAGE_80;
+ else if (streq(optarg, "0x83"))
+ default_page_code = PAGE_83;
+ else if (streq(optarg, "pre-spc3-83"))
+ default_page_code = PAGE_83_PRE_SPC3;
+ else {
+ log_error("Unknown page code '%s'", optarg);
+ return -1;
+ }
+ break;
+
+ case 's':
+ sg_version = atoi(optarg);
+ if (sg_version < 3 || sg_version > 4) {
+ log_error("Unknown SG version '%s'", optarg);
+ return -1;
+ }
+ break;
+
+ case 'u':
+ reformat_serial = true;
+ break;
+
+ case 'v':
+ log_set_target(LOG_TARGET_CONSOLE);
+ log_set_max_level(LOG_DEBUG);
+ log_open();
+ break;
+
+ case 'V':
+ printf("%s\n", VERSION);
+ exit(0);
+
+ case 'x':
+ export = true;
+ break;
+
+ case '?':
+ return -1;
+
+ default:
+ assert_not_reached("Unknown option");
+ }
+
+ if (optind < argc && !dev_specified) {
+ dev_specified = true;
+ strscpy(maj_min_dev, MAX_PATH_LEN, argv[optind]);
+ }
+
+ return 0;
+}
+
+static int per_dev_options(struct udev *udev,
+ struct scsi_id_device *dev_scsi, int *good_bad, int *page_code)
+{
+ int retval;
+ int newargc;
+ char **newargv = NULL;
+ int option;
+
+ *good_bad = all_good;
+ *page_code = default_page_code;
+
+ retval = get_file_options(udev, vendor_str, model_str, &newargc, &newargv);
+
+ optind = 1; /* reset this global extern */
+ while (retval == 0) {
+ option = getopt_long(newargc, newargv, "bgp:", options, NULL);
+ if (option == -1)
+ break;
+
+ switch (option) {
+ case 'b':
+ *good_bad = 0;
+ break;
+
+ case 'g':
+ *good_bad = 1;
+ break;
+
+ case 'p':
+ if (streq(optarg, "0x80")) {
+ *page_code = PAGE_80;
+ } else if (streq(optarg, "0x83")) {
+ *page_code = PAGE_83;
+ } else if (streq(optarg, "pre-spc3-83")) {
+ *page_code = PAGE_83_PRE_SPC3;
+ } else {
+ log_error("Unknown page code '%s'", optarg);
+ retval = -1;
+ }
+ break;
+
+ default:
+ log_error("Unknown or bad option '%c' (0x%x)", option, option);
+ retval = -1;
+ break;
+ }
+ }
+
+ if (newargv) {
+ free(newargv[0]);
+ free(newargv);
+ }
+ return retval;
+}
+
+static int set_inq_values(struct udev *udev, struct scsi_id_device *dev_scsi, const char *path)
+{
+ int retval;
+
+ dev_scsi->use_sg = sg_version;
+
+ retval = scsi_std_inquiry(udev, dev_scsi, path);
+ if (retval)
+ return retval;
+
+ udev_util_encode_string(dev_scsi->vendor, vendor_enc_str, sizeof(vendor_enc_str));
+ udev_util_encode_string(dev_scsi->model, model_enc_str, sizeof(model_enc_str));
+
+ util_replace_whitespace(dev_scsi->vendor, vendor_str, sizeof(vendor_str));
+ util_replace_chars(vendor_str, NULL);
+ util_replace_whitespace(dev_scsi->model, model_str, sizeof(model_str));
+ util_replace_chars(model_str, NULL);
+ set_type(dev_scsi->type, type_str, sizeof(type_str));
+ util_replace_whitespace(dev_scsi->revision, revision_str, sizeof(revision_str));
+ util_replace_chars(revision_str, NULL);
+ return 0;
+}
+
+/*
+ * scsi_id: try to get an id, if one is found, printf it to stdout.
+ * returns a value passed to exit() - 0 if printed an id, else 1.
+ */
+static int scsi_id(struct udev *udev, char *maj_min_dev)
+{
+ struct scsi_id_device dev_scsi = {};
+ int good_dev;
+ int page_code;
+ int retval = 0;
+
+ if (set_inq_values(udev, &dev_scsi, maj_min_dev) < 0) {
+ retval = 1;
+ goto out;
+ }
+
+ /* get per device (vendor + model) options from the config file */
+ per_dev_options(udev, &dev_scsi, &good_dev, &page_code);
+ if (!good_dev) {
+ retval = 1;
+ goto out;
+ }
+
+ /* read serial number from mode pages (no values for optical drives) */
+ scsi_get_serial(udev, &dev_scsi, maj_min_dev, page_code, MAX_SERIAL_LEN);
+
+ if (export) {
+ char serial_str[MAX_SERIAL_LEN];
+
+ printf("ID_SCSI=1\n");
+ printf("ID_VENDOR=%s\n", vendor_str);
+ printf("ID_VENDOR_ENC=%s\n", vendor_enc_str);
+ printf("ID_MODEL=%s\n", model_str);
+ printf("ID_MODEL_ENC=%s\n", model_enc_str);
+ printf("ID_REVISION=%s\n", revision_str);
+ printf("ID_TYPE=%s\n", type_str);
+ if (dev_scsi.serial[0] != '\0') {
+ util_replace_whitespace(dev_scsi.serial, serial_str, sizeof(serial_str));
+ util_replace_chars(serial_str, NULL);
+ printf("ID_SERIAL=%s\n", serial_str);
+ util_replace_whitespace(dev_scsi.serial_short, serial_str, sizeof(serial_str));
+ util_replace_chars(serial_str, NULL);
+ printf("ID_SERIAL_SHORT=%s\n", serial_str);
+ }
+ if (dev_scsi.wwn[0] != '\0') {
+ printf("ID_WWN=0x%s\n", dev_scsi.wwn);
+ if (dev_scsi.wwn_vendor_extension[0] != '\0') {
+ printf("ID_WWN_VENDOR_EXTENSION=0x%s\n", dev_scsi.wwn_vendor_extension);
+ printf("ID_WWN_WITH_EXTENSION=0x%s%s\n", dev_scsi.wwn, dev_scsi.wwn_vendor_extension);
+ } else
+ printf("ID_WWN_WITH_EXTENSION=0x%s\n", dev_scsi.wwn);
+ }
+ if (dev_scsi.tgpt_group[0] != '\0')
+ printf("ID_TARGET_PORT=%s\n", dev_scsi.tgpt_group);
+ if (dev_scsi.unit_serial_number[0] != '\0')
+ printf("ID_SCSI_SERIAL=%s\n", dev_scsi.unit_serial_number);
+ goto out;
+ }
+
+ if (dev_scsi.serial[0] == '\0') {
+ retval = 1;
+ goto out;
+ }
+
+ if (reformat_serial) {
+ char serial_str[MAX_SERIAL_LEN];
+
+ util_replace_whitespace(dev_scsi.serial, serial_str, sizeof(serial_str));
+ util_replace_chars(serial_str, NULL);
+ printf("%s\n", serial_str);
+ goto out;
+ }
+
+ printf("%s\n", dev_scsi.serial);
+out:
+ return retval;
+}
+
+int main(int argc, char **argv)
+{
+ _cleanup_udev_unref_ struct udev *udev;
+ int retval = 0;
+ char maj_min_dev[MAX_PATH_LEN];
+ int newargc;
+ char **newargv = NULL;
+
+ log_parse_environment();
+ log_open();
+
+ udev = udev_new();
+ if (udev == NULL)
+ goto exit;
+
+ /*
+ * Get config file options.
+ */
+ retval = get_file_options(udev, NULL, NULL, &newargc, &newargv);
+ if (retval < 0) {
+ retval = 1;
+ goto exit;
+ }
+ if (retval == 0) {
+ assert(newargv);
+
+ if (set_options(udev, newargc, newargv, maj_min_dev) < 0) {
+ retval = 2;
+ goto exit;
+ }
+ }
+
+ /*
+ * Get command line options (overriding any config file settings).
+ */
+ if (set_options(udev, argc, argv, maj_min_dev) < 0)
+ exit(1);
+
+ if (!dev_specified) {
+ log_error("No device specified.");
+ retval = 1;
+ goto exit;
+ }
+
+ retval = scsi_id(udev, maj_min_dev);
+
+exit:
+ if (newargv) {
+ free(newargv[0]);
+ free(newargv);
+ }
+ log_close();
+ return retval;
+}
diff --git a/src/grp-udev/scsi_id/scsi_id.h b/src/grp-udev/scsi_id/scsi_id.h
new file mode 100644
index 0000000000..5c2e1c28ee
--- /dev/null
+++ b/src/grp-udev/scsi_id/scsi_id.h
@@ -0,0 +1,75 @@
+#pragma once
+
+/*
+ * Copyright (C) IBM Corp. 2003
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define MAX_PATH_LEN 512
+
+/*
+ * MAX_ATTR_LEN: maximum length of the result of reading a sysfs
+ * attribute.
+ */
+#define MAX_ATTR_LEN 256
+
+/*
+ * MAX_SERIAL_LEN: the maximum length of the serial number, including
+ * added prefixes such as vendor and product (model) strings.
+ */
+#define MAX_SERIAL_LEN 256
+
+/*
+ * MAX_BUFFER_LEN: maximum buffer size and line length used while reading
+ * the config file.
+ */
+#define MAX_BUFFER_LEN 256
+
+struct scsi_id_device {
+ char vendor[9];
+ char model[17];
+ char revision[5];
+ char type[33];
+ char kernel[64];
+ char serial[MAX_SERIAL_LEN];
+ char serial_short[MAX_SERIAL_LEN];
+ int use_sg;
+
+ /* Always from page 0x80 e.g. 'B3G1P8500RWT' - may not be unique */
+ char unit_serial_number[MAX_SERIAL_LEN];
+
+ /* NULs if not set - otherwise hex encoding using lower-case e.g. '50014ee0016eb572' */
+ char wwn[17];
+
+ /* NULs if not set - otherwise hex encoding using lower-case e.g. '0xe00000d80000' */
+ char wwn_vendor_extension[17];
+
+ /* NULs if not set - otherwise decimal number */
+ char tgpt_group[8];
+};
+
+int scsi_std_inquiry(struct udev *udev, struct scsi_id_device *dev_scsi, const char *devname);
+int scsi_get_serial(struct udev *udev, struct scsi_id_device *dev_scsi, const char *devname,
+ int page_code, int len);
+
+/*
+ * Page code values.
+ */
+enum page_code {
+ PAGE_83_PRE_SPC3 = -0x83,
+ PAGE_UNSPECIFIED = 0x00,
+ PAGE_80 = 0x80,
+ PAGE_83 = 0x83,
+};
diff --git a/src/grp-udev/scsi_id/scsi_serial.c b/src/grp-udev/scsi_id/scsi_serial.c
new file mode 100644
index 0000000000..e079e28698
--- /dev/null
+++ b/src/grp-udev/scsi_id/scsi_serial.c
@@ -0,0 +1,964 @@
+/*
+ * Copyright (C) IBM Corp. 2003
+ *
+ * Author: Patrick Mansfield<patmans@us.ibm.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <errno.h>
+#include <fcntl.h>
+#include <inttypes.h>
+#include <linux/bsg.h>
+#include <linux/types.h>
+#include <scsi/scsi.h>
+#include <scsi/sg.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/ioctl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <time.h>
+#include <unistd.h>
+
+#include "libudev.h"
+
+#include "libudev-private.h"
+#include "random-util.h"
+#include "scsi.h"
+#include "scsi_id.h"
+#include "string-util.h"
+
+/*
+ * A priority based list of id, naa, and binary/ascii for the identifier
+ * descriptor in VPD page 0x83.
+ *
+ * Brute force search for a match starting with the first value in the
+ * following id_search_list. This is not a performance issue, since there
+ * is normally one or some small number of descriptors.
+ */
+static const struct scsi_id_search_values id_search_list[] = {
+ { SCSI_ID_TGTGROUP, SCSI_ID_NAA_DONT_CARE, SCSI_ID_BINARY },
+ { SCSI_ID_NAA, SCSI_ID_NAA_IEEE_REG_EXTENDED, SCSI_ID_BINARY },
+ { SCSI_ID_NAA, SCSI_ID_NAA_IEEE_REG_EXTENDED, SCSI_ID_ASCII },
+ { SCSI_ID_NAA, SCSI_ID_NAA_IEEE_REG, SCSI_ID_BINARY },
+ { SCSI_ID_NAA, SCSI_ID_NAA_IEEE_REG, SCSI_ID_ASCII },
+ /*
+ * Devices already exist using NAA values that are now marked
+ * reserved. These should not conflict with other values, or it is
+ * a bug in the device. As long as we find the IEEE extended one
+ * first, we really don't care what other ones are used. Using
+ * don't care here means that a device that returns multiple
+ * non-IEEE descriptors in a random order will get different
+ * names.
+ */
+ { SCSI_ID_NAA, SCSI_ID_NAA_DONT_CARE, SCSI_ID_BINARY },
+ { SCSI_ID_NAA, SCSI_ID_NAA_DONT_CARE, SCSI_ID_ASCII },
+ { SCSI_ID_EUI_64, SCSI_ID_NAA_DONT_CARE, SCSI_ID_BINARY },
+ { SCSI_ID_EUI_64, SCSI_ID_NAA_DONT_CARE, SCSI_ID_ASCII },
+ { SCSI_ID_T10_VENDOR, SCSI_ID_NAA_DONT_CARE, SCSI_ID_BINARY },
+ { SCSI_ID_T10_VENDOR, SCSI_ID_NAA_DONT_CARE, SCSI_ID_ASCII },
+ { SCSI_ID_VENDOR_SPECIFIC, SCSI_ID_NAA_DONT_CARE, SCSI_ID_BINARY },
+ { SCSI_ID_VENDOR_SPECIFIC, SCSI_ID_NAA_DONT_CARE, SCSI_ID_ASCII },
+};
+
+static const char hex_str[]="0123456789abcdef";
+
+/*
+ * Values returned in the result/status, only the ones used by the code
+ * are used here.
+ */
+
+#define DID_NO_CONNECT 0x01 /* Unable to connect before timeout */
+#define DID_BUS_BUSY 0x02 /* Bus remain busy until timeout */
+#define DID_TIME_OUT 0x03 /* Timed out for some other reason */
+#define DRIVER_TIMEOUT 0x06
+#define DRIVER_SENSE 0x08 /* Sense_buffer has been set */
+
+/* The following "category" function returns one of the following */
+#define SG_ERR_CAT_CLEAN 0 /* No errors or other information */
+#define SG_ERR_CAT_MEDIA_CHANGED 1 /* interpreted from sense buffer */
+#define SG_ERR_CAT_RESET 2 /* interpreted from sense buffer */
+#define SG_ERR_CAT_TIMEOUT 3
+#define SG_ERR_CAT_RECOVERED 4 /* Successful command after recovered err */
+#define SG_ERR_CAT_NOTSUPPORTED 5 /* Illegal / unsupported command */
+#define SG_ERR_CAT_SENSE 98 /* Something else in the sense buffer */
+#define SG_ERR_CAT_OTHER 99 /* Some other error/warning */
+
+static int do_scsi_page80_inquiry(struct udev *udev,
+ struct scsi_id_device *dev_scsi, int fd,
+ char *serial, char *serial_short, int max_len);
+
+static int sg_err_category_new(struct udev *udev,
+ int scsi_status, int msg_status, int
+ host_status, int driver_status, const
+ unsigned char *sense_buffer, int sb_len)
+{
+ scsi_status &= 0x7e;
+
+ /*
+ * XXX change to return only two values - failed or OK.
+ */
+
+ if (!scsi_status && !host_status && !driver_status)
+ return SG_ERR_CAT_CLEAN;
+
+ if ((scsi_status == SCSI_CHECK_CONDITION) ||
+ (scsi_status == SCSI_COMMAND_TERMINATED) ||
+ ((driver_status & 0xf) == DRIVER_SENSE)) {
+ if (sense_buffer && (sb_len > 2)) {
+ int sense_key;
+ unsigned char asc;
+
+ if (sense_buffer[0] & 0x2) {
+ sense_key = sense_buffer[1] & 0xf;
+ asc = sense_buffer[2];
+ } else {
+ sense_key = sense_buffer[2] & 0xf;
+ asc = (sb_len > 12) ? sense_buffer[12] : 0;
+ }
+
+ if (sense_key == RECOVERED_ERROR)
+ return SG_ERR_CAT_RECOVERED;
+ else if (sense_key == UNIT_ATTENTION) {
+ if (0x28 == asc)
+ return SG_ERR_CAT_MEDIA_CHANGED;
+ if (0x29 == asc)
+ return SG_ERR_CAT_RESET;
+ } else if (sense_key == ILLEGAL_REQUEST)
+ return SG_ERR_CAT_NOTSUPPORTED;
+ }
+ return SG_ERR_CAT_SENSE;
+ }
+ if (host_status) {
+ if ((host_status == DID_NO_CONNECT) ||
+ (host_status == DID_BUS_BUSY) ||
+ (host_status == DID_TIME_OUT))
+ return SG_ERR_CAT_TIMEOUT;
+ }
+ if (driver_status) {
+ if (driver_status == DRIVER_TIMEOUT)
+ return SG_ERR_CAT_TIMEOUT;
+ }
+ return SG_ERR_CAT_OTHER;
+}
+
+static int sg_err_category3(struct udev *udev, struct sg_io_hdr *hp)
+{
+ return sg_err_category_new(udev,
+ hp->status, hp->msg_status,
+ hp->host_status, hp->driver_status,
+ hp->sbp, hp->sb_len_wr);
+}
+
+static int sg_err_category4(struct udev *udev, struct sg_io_v4 *hp)
+{
+ return sg_err_category_new(udev, hp->device_status, 0,
+ hp->transport_status, hp->driver_status,
+ (unsigned char *)(uintptr_t)hp->response,
+ hp->response_len);
+}
+
+static int scsi_dump_sense(struct udev *udev,
+ struct scsi_id_device *dev_scsi,
+ unsigned char *sense_buffer, int sb_len)
+{
+ int s;
+ int code;
+ int sense_class;
+ int sense_key;
+ int asc, ascq;
+#ifdef DUMP_SENSE
+ char out_buffer[256];
+ int i, j;
+#endif
+
+ /*
+ * Figure out and print the sense key, asc and ascq.
+ *
+ * If you want to suppress these for a particular drive model, add
+ * a black list entry in the scsi_id config file.
+ *
+ * XXX We probably need to: lookup the sense/asc/ascq in a retry
+ * table, and if found return 1 (after dumping the sense, asc, and
+ * ascq). So, if/when we get something like a power on/reset,
+ * we'll retry the command.
+ */
+
+ if (sb_len < 1) {
+ log_debug("%s: sense buffer empty", dev_scsi->kernel);
+ return -1;
+ }
+
+ sense_class = (sense_buffer[0] >> 4) & 0x07;
+ code = sense_buffer[0] & 0xf;
+
+ if (sense_class == 7) {
+ /*
+ * extended sense data.
+ */
+ s = sense_buffer[7] + 8;
+ if (sb_len < s) {
+ log_debug("%s: sense buffer too small %d bytes, %d bytes too short",
+ dev_scsi->kernel, sb_len, s - sb_len);
+ return -1;
+ }
+ if ((code == 0x0) || (code == 0x1)) {
+ sense_key = sense_buffer[2] & 0xf;
+ if (s < 14) {
+ /*
+ * Possible?
+ */
+ log_debug("%s: sense result too" " small %d bytes",
+ dev_scsi->kernel, s);
+ return -1;
+ }
+ asc = sense_buffer[12];
+ ascq = sense_buffer[13];
+ } else if ((code == 0x2) || (code == 0x3)) {
+ sense_key = sense_buffer[1] & 0xf;
+ asc = sense_buffer[2];
+ ascq = sense_buffer[3];
+ } else {
+ log_debug("%s: invalid sense code 0x%x",
+ dev_scsi->kernel, code);
+ return -1;
+ }
+ log_debug("%s: sense key 0x%x ASC 0x%x ASCQ 0x%x",
+ dev_scsi->kernel, sense_key, asc, ascq);
+ } else {
+ if (sb_len < 4) {
+ log_debug("%s: sense buffer too small %d bytes, %d bytes too short",
+ dev_scsi->kernel, sb_len, 4 - sb_len);
+ return -1;
+ }
+
+ if (sense_buffer[0] < 15)
+ log_debug("%s: old sense key: 0x%x", dev_scsi->kernel, sense_buffer[0] & 0x0f);
+ else
+ log_debug("%s: sense = %2x %2x",
+ dev_scsi->kernel, sense_buffer[0], sense_buffer[2]);
+ log_debug("%s: non-extended sense class %d code 0x%0x",
+ dev_scsi->kernel, sense_class, code);
+
+ }
+
+#ifdef DUMP_SENSE
+ for (i = 0, j = 0; (i < s) && (j < 254); i++) {
+ out_buffer[j++] = hex_str[(sense_buffer[i] & 0xf0) >> 4];
+ out_buffer[j++] = hex_str[sense_buffer[i] & 0x0f];
+ out_buffer[j++] = ' ';
+ }
+ out_buffer[j] = '\0';
+ log_debug("%s: sense dump:", dev_scsi->kernel);
+ log_debug("%s: %s", dev_scsi->kernel, out_buffer);
+
+#endif
+ return -1;
+}
+
+static int scsi_dump(struct udev *udev,
+ struct scsi_id_device *dev_scsi, struct sg_io_hdr *io)
+{
+ if (!io->status && !io->host_status && !io->msg_status &&
+ !io->driver_status) {
+ /*
+ * Impossible, should not be called.
+ */
+ log_debug("%s: called with no error", __FUNCTION__);
+ return -1;
+ }
+
+ log_debug("%s: sg_io failed status 0x%x 0x%x 0x%x 0x%x",
+ dev_scsi->kernel, io->driver_status, io->host_status, io->msg_status, io->status);
+ if (io->status == SCSI_CHECK_CONDITION)
+ return scsi_dump_sense(udev, dev_scsi, io->sbp, io->sb_len_wr);
+ else
+ return -1;
+}
+
+static int scsi_dump_v4(struct udev *udev,
+ struct scsi_id_device *dev_scsi, struct sg_io_v4 *io)
+{
+ if (!io->device_status && !io->transport_status &&
+ !io->driver_status) {
+ /*
+ * Impossible, should not be called.
+ */
+ log_debug("%s: called with no error", __FUNCTION__);
+ return -1;
+ }
+
+ log_debug("%s: sg_io failed status 0x%x 0x%x 0x%x",
+ dev_scsi->kernel, io->driver_status, io->transport_status, io->device_status);
+ if (io->device_status == SCSI_CHECK_CONDITION)
+ return scsi_dump_sense(udev, dev_scsi, (unsigned char *)(uintptr_t)io->response,
+ io->response_len);
+ else
+ return -1;
+}
+
+static int scsi_inquiry(struct udev *udev,
+ struct scsi_id_device *dev_scsi, int fd,
+ unsigned char evpd, unsigned char page,
+ unsigned char *buf, unsigned int buflen)
+{
+ unsigned char inq_cmd[INQUIRY_CMDLEN] =
+ { INQUIRY_CMD, evpd, page, 0, buflen, 0 };
+ unsigned char sense[SENSE_BUFF_LEN];
+ void *io_buf;
+ struct sg_io_v4 io_v4;
+ struct sg_io_hdr io_hdr;
+ int retry = 3; /* rather random */
+ int retval;
+
+ if (buflen > SCSI_INQ_BUFF_LEN) {
+ log_debug("buflen %d too long", buflen);
+ return -1;
+ }
+
+resend:
+ if (dev_scsi->use_sg == 4) {
+ memzero(&io_v4, sizeof(struct sg_io_v4));
+ io_v4.guard = 'Q';
+ io_v4.protocol = BSG_PROTOCOL_SCSI;
+ io_v4.subprotocol = BSG_SUB_PROTOCOL_SCSI_CMD;
+ io_v4.request_len = sizeof(inq_cmd);
+ io_v4.request = (uintptr_t)inq_cmd;
+ io_v4.max_response_len = sizeof(sense);
+ io_v4.response = (uintptr_t)sense;
+ io_v4.din_xfer_len = buflen;
+ io_v4.din_xferp = (uintptr_t)buf;
+ io_buf = (void *)&io_v4;
+ } else {
+ memzero(&io_hdr, sizeof(struct sg_io_hdr));
+ io_hdr.interface_id = 'S';
+ io_hdr.cmd_len = sizeof(inq_cmd);
+ io_hdr.mx_sb_len = sizeof(sense);
+ io_hdr.dxfer_direction = SG_DXFER_FROM_DEV;
+ io_hdr.dxfer_len = buflen;
+ io_hdr.dxferp = buf;
+ io_hdr.cmdp = inq_cmd;
+ io_hdr.sbp = sense;
+ io_hdr.timeout = DEF_TIMEOUT;
+ io_buf = (void *)&io_hdr;
+ }
+
+ retval = ioctl(fd, SG_IO, io_buf);
+ if (retval < 0) {
+ if ((errno == EINVAL || errno == ENOSYS) && dev_scsi->use_sg == 4) {
+ dev_scsi->use_sg = 3;
+ goto resend;
+ }
+ log_debug_errno(errno, "%s: ioctl failed: %m", dev_scsi->kernel);
+ goto error;
+ }
+
+ if (dev_scsi->use_sg == 4)
+ retval = sg_err_category4(udev, io_buf);
+ else
+ retval = sg_err_category3(udev, io_buf);
+
+ switch (retval) {
+ case SG_ERR_CAT_NOTSUPPORTED:
+ buf[1] = 0;
+ /* Fallthrough */
+ case SG_ERR_CAT_CLEAN:
+ case SG_ERR_CAT_RECOVERED:
+ retval = 0;
+ break;
+
+ default:
+ if (dev_scsi->use_sg == 4)
+ retval = scsi_dump_v4(udev, dev_scsi, io_buf);
+ else
+ retval = scsi_dump(udev, dev_scsi, io_buf);
+ }
+
+ if (!retval) {
+ retval = buflen;
+ } else if (retval > 0) {
+ if (--retry > 0)
+ goto resend;
+ retval = -1;
+ }
+
+error:
+ if (retval < 0)
+ log_debug("%s: Unable to get INQUIRY vpd %d page 0x%x.",
+ dev_scsi->kernel, evpd, page);
+
+ return retval;
+}
+
+/* Get list of supported EVPD pages */
+static int do_scsi_page0_inquiry(struct udev *udev,
+ struct scsi_id_device *dev_scsi, int fd,
+ unsigned char *buffer, unsigned int len)
+{
+ int retval;
+
+ memzero(buffer, len);
+ retval = scsi_inquiry(udev, dev_scsi, fd, 1, 0x0, buffer, len);
+ if (retval < 0)
+ return 1;
+
+ if (buffer[1] != 0) {
+ log_debug("%s: page 0 not available.", dev_scsi->kernel);
+ return 1;
+ }
+ if (buffer[3] > len) {
+ log_debug("%s: page 0 buffer too long %d", dev_scsi->kernel, buffer[3]);
+ return 1;
+ }
+
+ /*
+ * Following check is based on code once included in the 2.5.x
+ * kernel.
+ *
+ * Some ill behaved devices return the standard inquiry here
+ * rather than the evpd data, snoop the data to verify.
+ */
+ if (buffer[3] > MODEL_LENGTH) {
+ /*
+ * If the vendor id appears in the page assume the page is
+ * invalid.
+ */
+ if (strneq((char *)&buffer[VENDOR_LENGTH], dev_scsi->vendor, VENDOR_LENGTH)) {
+ log_debug("%s: invalid page0 data", dev_scsi->kernel);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/*
+ * The caller checks that serial is long enough to include the vendor +
+ * model.
+ */
+static int prepend_vendor_model(struct udev *udev,
+ struct scsi_id_device *dev_scsi, char *serial)
+{
+ int ind;
+
+ strncpy(serial, dev_scsi->vendor, VENDOR_LENGTH);
+ strncat(serial, dev_scsi->model, MODEL_LENGTH);
+ ind = strlen(serial);
+
+ /*
+ * This is not a complete check, since we are using strncat/cpy
+ * above, ind will never be too large.
+ */
+ if (ind != (VENDOR_LENGTH + MODEL_LENGTH)) {
+ log_debug("%s: expected length %d, got length %d",
+ dev_scsi->kernel, (VENDOR_LENGTH + MODEL_LENGTH), ind);
+ return -1;
+ }
+ return ind;
+}
+
+/*
+ * check_fill_0x83_id - check the page 0x83 id, if OK allocate and fill
+ * serial number.
+ */
+static int check_fill_0x83_id(struct udev *udev,
+ struct scsi_id_device *dev_scsi,
+ unsigned char *page_83,
+ const struct scsi_id_search_values
+ *id_search, char *serial, char *serial_short,
+ int max_len, char *wwn,
+ char *wwn_vendor_extension, char *tgpt_group)
+{
+ int i, j, s, len;
+
+ /*
+ * ASSOCIATION must be with the device (value 0)
+ * or with the target port for SCSI_ID_TGTPORT
+ */
+ if ((page_83[1] & 0x30) == 0x10) {
+ if (id_search->id_type != SCSI_ID_TGTGROUP)
+ return 1;
+ } else if ((page_83[1] & 0x30) != 0)
+ return 1;
+
+ if ((page_83[1] & 0x0f) != id_search->id_type)
+ return 1;
+
+ /*
+ * Possibly check NAA sub-type.
+ */
+ if ((id_search->naa_type != SCSI_ID_NAA_DONT_CARE) &&
+ (id_search->naa_type != (page_83[4] & 0xf0) >> 4))
+ return 1;
+
+ /*
+ * Check for matching code set - ASCII or BINARY.
+ */
+ if ((page_83[0] & 0x0f) != id_search->code_set)
+ return 1;
+
+ /*
+ * page_83[3]: identifier length
+ */
+ len = page_83[3];
+ if ((page_83[0] & 0x0f) != SCSI_ID_ASCII)
+ /*
+ * If not ASCII, use two bytes for each binary value.
+ */
+ len *= 2;
+
+ /*
+ * Add one byte for the NUL termination, and one for the id_type.
+ */
+ len += 2;
+ if (id_search->id_type == SCSI_ID_VENDOR_SPECIFIC)
+ len += VENDOR_LENGTH + MODEL_LENGTH;
+
+ if (max_len < len) {
+ log_debug("%s: length %d too short - need %d",
+ dev_scsi->kernel, max_len, len);
+ return 1;
+ }
+
+ if (id_search->id_type == SCSI_ID_TGTGROUP && tgpt_group != NULL) {
+ unsigned int group;
+
+ group = ((unsigned int)page_83[6] << 8) | page_83[7];
+ sprintf(tgpt_group,"%x", group);
+ return 1;
+ }
+
+ serial[0] = hex_str[id_search->id_type];
+
+ /*
+ * For SCSI_ID_VENDOR_SPECIFIC prepend the vendor and model before
+ * the id since it is not unique across all vendors and models,
+ * this differs from SCSI_ID_T10_VENDOR, where the vendor is
+ * included in the identifier.
+ */
+ if (id_search->id_type == SCSI_ID_VENDOR_SPECIFIC)
+ if (prepend_vendor_model(udev, dev_scsi, &serial[1]) < 0)
+ return 1;
+
+ i = 4; /* offset to the start of the identifier */
+ s = j = strlen(serial);
+ if ((page_83[0] & 0x0f) == SCSI_ID_ASCII) {
+ /*
+ * ASCII descriptor.
+ */
+ while (i < (4 + page_83[3]))
+ serial[j++] = page_83[i++];
+ } else {
+ /*
+ * Binary descriptor, convert to ASCII, using two bytes of
+ * ASCII for each byte in the page_83.
+ */
+ while (i < (4 + page_83[3])) {
+ serial[j++] = hex_str[(page_83[i] & 0xf0) >> 4];
+ serial[j++] = hex_str[page_83[i] & 0x0f];
+ i++;
+ }
+ }
+
+ strcpy(serial_short, &serial[s]);
+
+ if (id_search->id_type == SCSI_ID_NAA && wwn != NULL) {
+ strncpy(wwn, &serial[s], 16);
+ if (wwn_vendor_extension != NULL)
+ strncpy(wwn_vendor_extension, &serial[s + 16], 16);
+ }
+
+ return 0;
+}
+
+/* Extract the raw binary from VPD 0x83 pre-SPC devices */
+static int check_fill_0x83_prespc3(struct udev *udev,
+ struct scsi_id_device *dev_scsi,
+ unsigned char *page_83,
+ const struct scsi_id_search_values
+ *id_search, char *serial, char *serial_short, int max_len)
+{
+ int i, j;
+
+ serial[0] = hex_str[id_search->id_type];
+ /* serial has been memset to zero before */
+ j = strlen(serial); /* j = 1; */
+
+ for (i = 0; (i < page_83[3]) && (j < max_len-3); ++i) {
+ serial[j++] = hex_str[(page_83[4+i] & 0xf0) >> 4];
+ serial[j++] = hex_str[ page_83[4+i] & 0x0f];
+ }
+ serial[max_len-1] = 0;
+ strncpy(serial_short, serial, max_len-1);
+ return 0;
+}
+
+
+/* Get device identification VPD page */
+static int do_scsi_page83_inquiry(struct udev *udev,
+ struct scsi_id_device *dev_scsi, int fd,
+ char *serial, char *serial_short, int len,
+ char *unit_serial_number, char *wwn,
+ char *wwn_vendor_extension, char *tgpt_group)
+{
+ int retval;
+ unsigned int id_ind, j;
+ unsigned char page_83[SCSI_INQ_BUFF_LEN];
+
+ /* also pick up the page 80 serial number */
+ do_scsi_page80_inquiry(udev, dev_scsi, fd, NULL, unit_serial_number, MAX_SERIAL_LEN);
+
+ memzero(page_83, SCSI_INQ_BUFF_LEN);
+ retval = scsi_inquiry(udev, dev_scsi, fd, 1, PAGE_83, page_83,
+ SCSI_INQ_BUFF_LEN);
+ if (retval < 0)
+ return 1;
+
+ if (page_83[1] != PAGE_83) {
+ log_debug("%s: Invalid page 0x83", dev_scsi->kernel);
+ return 1;
+ }
+
+ /*
+ * XXX Some devices (IBM 3542) return all spaces for an identifier if
+ * the LUN is not actually configured. This leads to identifiers of
+ * the form: "1 ".
+ */
+
+ /*
+ * Model 4, 5, and (some) model 6 EMC Symmetrix devices return
+ * a page 83 reply according to SCSI-2 format instead of SPC-2/3.
+ *
+ * The SCSI-2 page 83 format returns an IEEE WWN in binary
+ * encoded hexi-decimal in the 16 bytes following the initial
+ * 4-byte page 83 reply header.
+ *
+ * Both the SPC-2 and SPC-3 formats return an IEEE WWN as part
+ * of an Identification descriptor. The 3rd byte of the first
+ * Identification descriptor is a reserved (BSZ) byte field.
+ *
+ * Reference the 7th byte of the page 83 reply to determine
+ * whether the reply is compliant with SCSI-2 or SPC-2/3
+ * specifications. A zero value in the 7th byte indicates
+ * an SPC-2/3 conformant reply, (i.e., the reserved field of the
+ * first Identification descriptor). This byte will be non-zero
+ * for a SCSI-2 conformant page 83 reply from these EMC
+ * Symmetrix models since the 7th byte of the reply corresponds
+ * to the 4th and 5th nibbles of the 6-byte OUI for EMC, that is,
+ * 0x006048.
+ */
+
+ if (page_83[6] != 0)
+ return check_fill_0x83_prespc3(udev,
+ dev_scsi, page_83, id_search_list,
+ serial, serial_short, len);
+
+ /*
+ * Search for a match in the prioritized id_search_list - since WWN ids
+ * come first we can pick up the WWN in check_fill_0x83_id().
+ */
+ for (id_ind = 0;
+ id_ind < sizeof(id_search_list)/sizeof(id_search_list[0]);
+ id_ind++) {
+ /*
+ * Examine each descriptor returned. There is normally only
+ * one or a small number of descriptors.
+ */
+ for (j = 4; j <= (unsigned int)page_83[3] + 3; j += page_83[j + 3] + 4) {
+ retval = check_fill_0x83_id(udev,
+ dev_scsi, &page_83[j],
+ &id_search_list[id_ind],
+ serial, serial_short, len,
+ wwn, wwn_vendor_extension,
+ tgpt_group);
+ if (!retval)
+ return retval;
+ else if (retval < 0)
+ return retval;
+ }
+ }
+ return 1;
+}
+
+/*
+ * Get device identification VPD page for older SCSI-2 device which is not
+ * compliant with either SPC-2 or SPC-3 format.
+ *
+ * Return the hard coded error code value 2 if the page 83 reply is not
+ * conformant to the SCSI-2 format.
+ */
+static int do_scsi_page83_prespc3_inquiry(struct udev *udev,
+ struct scsi_id_device *dev_scsi, int fd,
+ char *serial, char *serial_short, int len)
+{
+ int retval;
+ int i, j;
+ unsigned char page_83[SCSI_INQ_BUFF_LEN];
+
+ memzero(page_83, SCSI_INQ_BUFF_LEN);
+ retval = scsi_inquiry(udev, dev_scsi, fd, 1, PAGE_83, page_83, SCSI_INQ_BUFF_LEN);
+ if (retval < 0)
+ return 1;
+
+ if (page_83[1] != PAGE_83) {
+ log_debug("%s: Invalid page 0x83", dev_scsi->kernel);
+ return 1;
+ }
+ /*
+ * Model 4, 5, and (some) model 6 EMC Symmetrix devices return
+ * a page 83 reply according to SCSI-2 format instead of SPC-2/3.
+ *
+ * The SCSI-2 page 83 format returns an IEEE WWN in binary
+ * encoded hexi-decimal in the 16 bytes following the initial
+ * 4-byte page 83 reply header.
+ *
+ * Both the SPC-2 and SPC-3 formats return an IEEE WWN as part
+ * of an Identification descriptor. The 3rd byte of the first
+ * Identification descriptor is a reserved (BSZ) byte field.
+ *
+ * Reference the 7th byte of the page 83 reply to determine
+ * whether the reply is compliant with SCSI-2 or SPC-2/3
+ * specifications. A zero value in the 7th byte indicates
+ * an SPC-2/3 conformant reply, (i.e., the reserved field of the
+ * first Identification descriptor). This byte will be non-zero
+ * for a SCSI-2 conformant page 83 reply from these EMC
+ * Symmetrix models since the 7th byte of the reply corresponds
+ * to the 4th and 5th nibbles of the 6-byte OUI for EMC, that is,
+ * 0x006048.
+ */
+ if (page_83[6] == 0)
+ return 2;
+
+ serial[0] = hex_str[id_search_list[0].id_type];
+ /*
+ * The first four bytes contain data, not a descriptor.
+ */
+ i = 4;
+ j = strlen(serial);
+ /*
+ * Binary descriptor, convert to ASCII,
+ * using two bytes of ASCII for each byte
+ * in the page_83.
+ */
+ while (i < (page_83[3]+4)) {
+ serial[j++] = hex_str[(page_83[i] & 0xf0) >> 4];
+ serial[j++] = hex_str[page_83[i] & 0x0f];
+ i++;
+ }
+ return 0;
+}
+
+/* Get unit serial number VPD page */
+static int do_scsi_page80_inquiry(struct udev *udev,
+ struct scsi_id_device *dev_scsi, int fd,
+ char *serial, char *serial_short, int max_len)
+{
+ int retval;
+ int ser_ind;
+ int i;
+ int len;
+ unsigned char buf[SCSI_INQ_BUFF_LEN];
+
+ memzero(buf, SCSI_INQ_BUFF_LEN);
+ retval = scsi_inquiry(udev, dev_scsi, fd, 1, PAGE_80, buf, SCSI_INQ_BUFF_LEN);
+ if (retval < 0)
+ return retval;
+
+ if (buf[1] != PAGE_80) {
+ log_debug("%s: Invalid page 0x80", dev_scsi->kernel);
+ return 1;
+ }
+
+ len = 1 + VENDOR_LENGTH + MODEL_LENGTH + buf[3];
+ if (max_len < len) {
+ log_debug("%s: length %d too short - need %d",
+ dev_scsi->kernel, max_len, len);
+ return 1;
+ }
+ /*
+ * Prepend 'S' to avoid unlikely collision with page 0x83 vendor
+ * specific type where we prepend '0' + vendor + model.
+ */
+ len = buf[3];
+ if (serial != NULL) {
+ serial[0] = 'S';
+ ser_ind = prepend_vendor_model(udev, dev_scsi, &serial[1]);
+ if (ser_ind < 0)
+ return 1;
+ ser_ind++; /* for the leading 'S' */
+ for (i = 4; i < len + 4; i++, ser_ind++)
+ serial[ser_ind] = buf[i];
+ }
+ if (serial_short != NULL) {
+ memcpy(serial_short, &buf[4], len);
+ serial_short[len] = '\0';
+ }
+ return 0;
+}
+
+int scsi_std_inquiry(struct udev *udev,
+ struct scsi_id_device *dev_scsi, const char *devname)
+{
+ int fd;
+ unsigned char buf[SCSI_INQ_BUFF_LEN];
+ struct stat statbuf;
+ int err = 0;
+
+ fd = open(devname, O_RDONLY | O_NONBLOCK | O_CLOEXEC);
+ if (fd < 0) {
+ log_debug_errno(errno, "scsi_id: cannot open %s: %m", devname);
+ return 1;
+ }
+
+ if (fstat(fd, &statbuf) < 0) {
+ log_debug_errno(errno, "scsi_id: cannot stat %s: %m", devname);
+ err = 2;
+ goto out;
+ }
+ sprintf(dev_scsi->kernel,"%d:%d", major(statbuf.st_rdev),
+ minor(statbuf.st_rdev));
+
+ memzero(buf, SCSI_INQ_BUFF_LEN);
+ err = scsi_inquiry(udev, dev_scsi, fd, 0, 0, buf, SCSI_INQ_BUFF_LEN);
+ if (err < 0)
+ goto out;
+
+ err = 0;
+ memcpy(dev_scsi->vendor, buf + 8, 8);
+ dev_scsi->vendor[8] = '\0';
+ memcpy(dev_scsi->model, buf + 16, 16);
+ dev_scsi->model[16] = '\0';
+ memcpy(dev_scsi->revision, buf + 32, 4);
+ dev_scsi->revision[4] = '\0';
+ sprintf(dev_scsi->type,"%x", buf[0] & 0x1f);
+
+out:
+ close(fd);
+ return err;
+}
+
+int scsi_get_serial(struct udev *udev,
+ struct scsi_id_device *dev_scsi, const char *devname,
+ int page_code, int len)
+{
+ unsigned char page0[SCSI_INQ_BUFF_LEN];
+ int fd = -1;
+ int cnt;
+ int ind;
+ int retval;
+
+ memzero(dev_scsi->serial, len);
+ initialize_srand();
+ for (cnt = 20; cnt > 0; cnt--) {
+ struct timespec duration;
+
+ fd = open(devname, O_RDONLY | O_NONBLOCK | O_CLOEXEC);
+ if (fd >= 0 || errno != EBUSY)
+ break;
+ duration.tv_sec = 0;
+ duration.tv_nsec = (200 * 1000 * 1000) + (rand() % 100 * 1000 * 1000);
+ nanosleep(&duration, NULL);
+ }
+ if (fd < 0)
+ return 1;
+
+ if (page_code == PAGE_80) {
+ if (do_scsi_page80_inquiry(udev, dev_scsi, fd, dev_scsi->serial, dev_scsi->serial_short, len)) {
+ retval = 1;
+ goto completed;
+ } else {
+ retval = 0;
+ goto completed;
+ }
+ } else if (page_code == PAGE_83) {
+ if (do_scsi_page83_inquiry(udev, dev_scsi, fd, dev_scsi->serial, dev_scsi->serial_short, len, dev_scsi->unit_serial_number, dev_scsi->wwn, dev_scsi->wwn_vendor_extension, dev_scsi->tgpt_group)) {
+ retval = 1;
+ goto completed;
+ } else {
+ retval = 0;
+ goto completed;
+ }
+ } else if (page_code == PAGE_83_PRE_SPC3) {
+ retval = do_scsi_page83_prespc3_inquiry(udev, dev_scsi, fd, dev_scsi->serial, dev_scsi->serial_short, len);
+ if (retval) {
+ /*
+ * Fallback to servicing a SPC-2/3 compliant page 83
+ * inquiry if the page 83 reply format does not
+ * conform to pre-SPC3 expectations.
+ */
+ if (retval == 2) {
+ if (do_scsi_page83_inquiry(udev, dev_scsi, fd, dev_scsi->serial, dev_scsi->serial_short, len, dev_scsi->unit_serial_number, dev_scsi->wwn, dev_scsi->wwn_vendor_extension, dev_scsi->tgpt_group)) {
+ retval = 1;
+ goto completed;
+ } else {
+ retval = 0;
+ goto completed;
+ }
+ }
+ else {
+ retval = 1;
+ goto completed;
+ }
+ } else {
+ retval = 0;
+ goto completed;
+ }
+ } else if (page_code != 0x00) {
+ log_debug("%s: unsupported page code 0x%d", dev_scsi->kernel, page_code);
+ retval = 1;
+ goto completed;
+ }
+
+ /*
+ * Get page 0, the page of the pages. By default, try from best to
+ * worst of supported pages: 0x83 then 0x80.
+ */
+ if (do_scsi_page0_inquiry(udev, dev_scsi, fd, page0, SCSI_INQ_BUFF_LEN)) {
+ /*
+ * Don't try anything else. Black list if a specific page
+ * should be used for this vendor+model, or maybe have an
+ * optional fall-back to page 0x80 or page 0x83.
+ */
+ retval = 1;
+ goto completed;
+ }
+
+ for (ind = 4; ind <= page0[3] + 3; ind++)
+ if (page0[ind] == PAGE_83)
+ if (!do_scsi_page83_inquiry(udev, dev_scsi, fd,
+ dev_scsi->serial, dev_scsi->serial_short, len, dev_scsi->unit_serial_number, dev_scsi->wwn, dev_scsi->wwn_vendor_extension, dev_scsi->tgpt_group)) {
+ /*
+ * Success
+ */
+ retval = 0;
+ goto completed;
+ }
+
+ for (ind = 4; ind <= page0[3] + 3; ind++)
+ if (page0[ind] == PAGE_80)
+ if (!do_scsi_page80_inquiry(udev, dev_scsi, fd,
+ dev_scsi->serial, dev_scsi->serial_short, len)) {
+ /*
+ * Success
+ */
+ retval = 0;
+ goto completed;
+ }
+ retval = 1;
+
+completed:
+ close(fd);
+ return retval;
+}