diff options
Diffstat (limited to 'src/libelogind/sd-bus/PORTING-DBUS1')
-rw-r--r-- | src/libelogind/sd-bus/PORTING-DBUS1 | 535 |
1 files changed, 535 insertions, 0 deletions
diff --git a/src/libelogind/sd-bus/PORTING-DBUS1 b/src/libelogind/sd-bus/PORTING-DBUS1 new file mode 100644 index 0000000000..2dedb28bcf --- /dev/null +++ b/src/libelogind/sd-bus/PORTING-DBUS1 @@ -0,0 +1,535 @@ +A few hints on supporting kdbus as backend in your favorite D-Bus library. + +~~~ + +Before you read this, have a look at the DIFFERENCES and +GVARIANT_SERIALIZATION texts you find in the same directory where you +found this. + +We invite you to port your favorite D-Bus protocol implementation +over to kdbus. However, there are a couple of complexities +involved. On kdbus we only speak GVariant marshaling, kdbus clients +ignore traffic in dbus1 marshaling. Thus, you need to add a second, +GVariant compatible marshaler to your library first. + +After you have done that: here's the basic principle how kdbus works: + +You connect to a bus by opening its bus node in /sys/fs/kdbus/. All +buses have a device node there, it starts with a numeric UID of the +owner of the bus, followed by a dash and a string identifying the +bus. The system bus is thus called /sys/fs/kdbus/0-system, and for user +buses the device node is /sys/fs/kdbus/1000-user (if 1000 is your user +id). + +(Before we proceed, please always keep a copy of libsystemd next +to you, ultimately that's where the details are, this document simply +is a rough overview to help you grok things.) + +CONNECTING + +To connect to a bus, simply open() its device node and issue the +KDBUS_CMD_HELLO call. That's it. Now you are connected. Do not send +Hello messages or so (as you would on dbus1), that does not exist for +kdbus. + +The structure you pass to the ioctl will contain a couple of +parameters that you need to know, to operate on the bus. + +There are two flags fields, one indicating features of the kdbus +kernel side ("conn_flags"), the other one ("bus_flags") indicating +features of the bus owner (i.e. systemd). Both flags fields are 64bit +in width. + +When calling into the ioctl, you need to place your own supported +feature bits into these fields. This tells the kernel about the +features you support. When the ioctl returns, it will contain the +features the kernel supports. + +If any of the higher 32bit are set on the two flags fields and your +client does not know what they mean, it must disconnect. The upper +32bit are used to indicate "incompatible" feature additions on the bus +system, the lower 32bit indicate "compatible" feature additions. A +client that does not support a "compatible" feature addition can go on +communicating with the bus, however a client that does not support an +"incompatible" feature must not proceed with the connection. When a +client encountes such an "incompatible" feature it should immediately +try the next bus address configured in the bus address string. + +The hello structure also contains another flags field "attach_flags" +which indicates metadata that is optionally attached to all incoming +messages. You probably want to set KDBUS_ATTACH_NAMES unconditionally +in it. This has the effect that all well-known names of a sender are +attached to all incoming messages. You need this information to +implement matches that match on a message sender name correctly. Of +course, you should only request the attachment of as little metadata +fields as you need. + +The kernel will return in the "id" field your unique id. This is a +simple numeric value. For compatibility with classic dbus1 simply +format this as string and prefix ":1.". + +The kernel will also return the bloom filter size and bloom filter +hash function number used for the signal broadcast bloom filter (see +below). + +The kernel will also return the bus ID of the bus in a 128bit field. + +The pool size field specifies the size of the memory mapped buffer. +After the calling the hello ioctl, you should memory map the kdbus +fd. In this memory mapped region, the kernel will place all your incoming +messages. + +SENDING MESSAGES + +Use the MSG_SEND ioctl to send a message to another peer. The ioctl +takes a structure that contains a variety of fields: + +The flags field corresponds closely to the old dbus1 message header +flags field, though the DONT_EXPECT_REPLY field got inverted into +EXPECT_REPLY. + +The dst_id/src_id field contains the unique id of the destination and +the sender. The sender field is overridden by the kernel usually, hence +you shouldn't fill it in. The destination field can also take the +special value KDBUS_DST_ID_BROADCAST for broadcast messages. For +messages intended to a well-known name set the field to +KDBUS_DST_ID_NAME, and attach the name in a special "items" entry to +the message (see below). + +The payload field indicates the payload. For all dbus traffic it +should carry the value 0x4442757344427573ULL. (Which encodes +'DBusDBus'). + +The cookie field corresponds with the "serial" field of classic +dbus1. We simply renamed it here (and extended it to 64bit) since we +didn't want to imply the monotonicity of the assignment the way the +word "serial" indicates it. + +When sending a message that expects a reply, you need to set the +EXPECT_REPLY flag in the message flag field. In this case you should +also fill out the "timeout_ns" value which indicates the timeout in +nsec for this call. If the peer does not respond in this time you will +get a notification of a timeout. Note that this is also used for +security purposes: a single reply messages is only allowed through the +bus as long as the timeout has not ended. With this timeout value you +hence "open a time window" in which the peer might respond to your +request and the policy allows the response to go through. + +When sending a message that is a reply, you need to fill in the +cookie_reply field, which is similar to the reply_serial field of +dbus1. Note that a message cannot have EXPECT_REPLY and a reply_serial +at the same time! + +This pretty much explains the ioctl header. The actual payload of the +data is now referenced in additional items that are attached to this +ioctl header structure at the end. When sending a message, you attach +items of the type PAYLOAD_VEC, PAYLOAD_MEMFD, FDS, BLOOM_FILTER, +DST_NAME to it: + + KDBUS_ITEM_PAYLOAD_VEC: contains a pointer + length pair for + referencing arbitrary user memory. This is how you reference most + of your data. It's a lot like the good old iovec structure of glibc. + + KDBUS_ITEM_PAYLOAD_MEMFD: for large data blocks it is preferable + to send prepared "memfds" (see below) over. This item contains an + fd for a memfd plus a size. + + KDBUS_ITEM_FDS: for sending over fds attach an item of this type with + an array of fds. + + KDBUS_ITEM_BLOOM_FILTER: the calculated bloom filter of this message, + only for undirected (broadcast) message. + + KDBUS_ITEM_DST_NAME: for messages that are directed to a well-known + name (instead of a unique name), this item contains the well-known + name field. + +A single message may consists of no, one or more payload items of type +PAYLOAD_VEC or PAYLOAD_MEMFD. D-Bus protocol implementations should +treat them as a single block that just happens to be split up into +multiple items. Some restrictions apply however: + + The message header in its entirety must be contained in a single + PAYLOAD_VEC item. + + You may only split your message up right in front of each GVariant + contained in the payload, as well is immediately before framing of a + Gvariant, as well after as any padding bytes if there are any. The + padding bytes must be wholly contained in the preceding + PAYLOAD_VEC/PAYLOAD_MEMFD item. You may not split up basic types + nor arrays of fixed types. The latter is necessary to allow APIs + to return direct pointers to linear arrays of numeric + values. Examples: The basic types "u", "s", "t" have to be in the + same payload item. The array of fixed types "ay", "ai" have to be + fully in contained in the same payload item. For an array "as" or + "a(si)" the only restriction however is to keep each string + individually in an uninterrupted item, to keep the framing of each + element and the array in a single uninterrupted item, however the + various strings might end up in different items. + +Note again, that splitting up messages into separate items is up to the +implementation. Also note that the kdbus kernel side might merge +separate items if it deems this to be useful. However, the order in +which items are contained in the message is left untouched. + +PAYLOAD_MEMFD items allow zero-copy data transfer (see below regarding +the memfd concept). Note however that the overhead of mapping these +makes them relatively expensive, and only worth the trouble for memory +blocks > 512K (this value appears to be quite universal across +architectures, as we tested). Thus we recommend sending PAYLOAD_VEC +items over for small messages and restore to PAYLOAD_MEMFD items for +messages > 512K. Since while building up the message you might not +know yet whether it will grow beyond this boundary a good approach is +to simply build the message unconditionally in a memfd +object. However, when the message is sealed to be sent away check for +the size limit. If the size of the message is < 512K, then simply send +the data as PAYLOAD_VEC and reuse the memfd. If it is >= 512K, seal +the memfd and send it as PAYLOAD_MEMFD, and allocate a new memfd for +the next message. + +RECEIVING MESSAGES + +Use the MSG_RECV ioctl to read a message from kdbus. This will return +an offset into the pool memory map, relative to its beginning. + +The received message structure more or less follows the structure of +the message originally sent. However, certain changes have been +made. In the header the src_id field will be filled in. + +The payload items might have gotten merged and PAYLOAD_VEC items are +not used. Instead, you will only find PAYLOAD_OFF and PAYLOAD_MEMFD +items. The former contain an offset and size into your memory mapped +pool where you find the payload. + +If during the HELLO ioctl you asked for getting metadata attached to +your message, you will find additional KDBUS_ITEM_CREDS, +KDBUS_ITEM_PID_COMM, KDBUS_ITEM_TID_COMM, KDBUS_ITEM_TIMESTAMP, +KDBUS_ITEM_EXE, KDBUS_ITEM_CMDLINE, KDBUS_ITEM_CGROUP, +KDBUS_ITEM_CAPS, KDBUS_ITEM_SECLABEL, KDBUS_ITEM_AUDIT items that +contain this metadata. This metadata will be gathered from the sender +at the point in time it sends the message. This information is +uncached, and since it is appended by the kernel, trustable. The +KDBUS_ITEM_SECLABEL item usually contains the SELinux security label, +if it is used. + +After processing the message you need to call the KDBUS_CMD_FREE +ioctl, which releases the message from the pool, and allows the kernel +to store another message there. Note that the memory used by the pool +is ordinary anonymous, swappable memory that is backed by tmpfs. Hence +there is no need to copy the message out of it quickly, instead you +can just leave it there as long as you need it and release it via the +FREE ioctl only after that's done. + +BLOOM FILTERS + +The kernel does not understand dbus marshaling, it will not look into +the message payload. To allow clients to subscribe to specific subsets +of the broadcast matches we employ bloom filters. + +When broadcasting messages, a bloom filter needs to be attached to the +message in a KDBUS_ITEM_BLOOM item (and only for broadcasting +messages!). If you don't know what bloom filters are, read up now on +Wikipedia. In short: they are a very efficient way how to +probabilistically check whether a certain word is contained in a +vocabulary. It knows no false negatives, but it does know false +positives. + +The parameters for the bloom filters that need to be included in +broadcast message is communicated to userspace as part of the hello +response structure (see above). By default it has the parameters m=512 +(bits in the filter), k=8 (nr of hash functions). Note however, that +this is subject to change in later versions, and userspace +implementations must be capable of handling m values between at least +m=8 and m=2^32, and k values between at least k=1 and k=32. The +underlying hash function is SipHash-2-4. It is used with a number of +constant (yet originally randomly generated) 128bit hash keys, more +specifically: + + b9,66,0b,f0,46,70,47,c1,88,75,c4,9c,54,b9,bd,15, + aa,a1,54,a2,e0,71,4b,39,bf,e1,dd,2e,9f,c5,4a,3b, + 63,fd,ae,be,cd,82,48,12,a1,6e,41,26,cb,fa,a0,c8, + 23,be,45,29,32,d2,46,2d,82,03,52,28,fe,37,17,f5, + 56,3b,bf,ee,5a,4f,43,39,af,aa,94,08,df,f0,fc,10, + 31,80,c8,73,c7,ea,46,d3,aa,25,75,0f,9e,4c,09,29, + 7d,f7,18,4b,7b,a4,44,d5,85,3c,06,e0,65,53,96,6d, + f2,77,e9,6f,93,b5,4e,71,9a,0c,34,88,39,25,bf,35 + +When calculating the first bit index into the bloom filter, the +SipHash-2-4 hash value is calculated for the input data and the first +16 bytes of the array above as hash key. Of the resulting 8 bytes of +output, as many full bytes are taken for the bit index as necessary, +starting from the output's first byte. For the second bit index the +same hash value is used, continuing with the next unused output byte, +and so on. Each time the bytes returned by the hash function are +depleted it is recalculated with the next 16 byte hash key from the +array above and the same input data. + +For each message to send across the bus we populate the bloom filter +with all possible matchable strings. If a client then wants to +subscribe to messages of this type, it simply tells the kernel to test +its own calculated bit mask against the bloom filter of each message. + +More specifically, the following strings are added to the bloom filter +of each message that is broadcasted: + + The string "interface:" suffixed by the interface name + + The string "member:" suffixed by the member name + + The string "path:" suffixed by the path name + + The string "path-slash-prefix:" suffixed with the path name, and + also all prefixes of the path name (cut off at "/"), also prefixed + with "path-slash-prefix". + + The string "message-type:" suffixed with the strings "signal", + "method_call", "error" or "method_return" for the respective message + type of the message. + + If the first argument of the message is a string, "arg0:" suffixed + with the first argument. + + If the first argument of the message is a string, "arg0-dot-prefix" + suffixed with the first argument, and also all prefixes of the + argument (cut off at "."), also prefixed with "arg0-dot-prefix". + + If the first argument of the message is a string, + "arg0-slash-prefix" suffixed with the first argument, and also all + prefixes of the argument (cut off at "/"), also prefixed with + "arg0-slash-prefix". + + Similar for all further arguments that are strings up to 63, for the + arguments and their "dot" and "slash" prefixes. On the first + argument that is not a string, addition to the bloom filter should be + stopped however. + +(Note that the bloom filter does not contain sender nor receiver +names!) + +When a client wants to subscribe to messages matching a certain +expression, it should calculate the bloom mask following the same +algorithm. The kernel will then simply test the mask against the +attached bloom filters. + +Note that bloom filters are probabilistic, which means that clients +might get messages they did not expect. Your bus protocol +implementation must be capable of dealing with these unexpected +messages (which it needs to anyway, given that transfers are +relatively unrestricted on kdbus and people can send you all kinds of +non-sense). + +If a client connects to a bus whose bloom filter metrics (i.e. filter +size and number of hash functions) are outside of the range the client +supports it must immediately disconnect and continue connection with +the next bus address of the bus connection string. + +INSTALLING MATCHES + +To install matches for broadcast messages, use the KDBUS_CMD_ADD_MATCH +ioctl. It takes a structure that contains an encoded match expression, +and that is followed by one or more items, which are combined in an +AND way. (Meaning: a message is matched exactly when all items +attached to the original ioctl struct match). + +To match against other user messages add a KDBUS_ITEM_BLOOM item in +the match (see above). Note that the bloom filter does not include +matches to the sender names. To additionally check against sender +names, use the KDBUS_ITEM_ID (for unique id matches) and +KDBUS_ITEM_NAME (for well-known name matches) item types. + +To match against kernel generated messages (see below) you should add +items of the same type as the kernel messages include, +i.e. KDBUS_ITEM_NAME_ADD, KDBUS_ITEM_NAME_REMOVE, +KDBUS_ITEM_NAME_CHANGE, KDBUS_ITEM_ID_ADD, KDBUS_ITEM_ID_REMOVE and +fill them out. Note however, that you have some wildcards in this +case, for example the .id field of KDBUS_ITEM_ID_ADD/KDBUS_ITEM_ID_REMOVE +structures may be set to 0 to match against any id addition/removal. + +Note that dbus match strings do no map 1:1 to these ioctl() calls. In +many cases (where the match string is "underspecified") you might need +to issue up to six different ioctl() calls for the same match. For +example, the empty match (which matches against all messages), would +translate into one KDBUS_ITEM_BLOOM ioctl, one KDBUS_ITEM_NAME_ADD, +one KDBUS_ITEM_NAME_CHANGE, one KDBUS_ITEM_NAME_REMOVE, one +KDBUS_ITEM_ID_ADD and one KDBUS_ITEM_ID_REMOVE. + +When creating a match, you may attach a "cookie" value to them, which +is used for deleting this match again. The cookie can be selected freely +by the client. When issuing KDBUS_CMD_REMOVE_MATCH, simply pass the +same cookie as before and all matches matching the same "cookie" value +will be removed. This is particularly handy for the case where multiple +ioctl()s are added for a single match strings. + +MEMFDS + +memfds may be sent across kdbus via KDBUS_ITEM_PAYLOAD_MEMFD items +attached to messages. If this is done, the data included in the memfd +is considered part of the payload stream of a message, and are treated +the same way as KDBUS_ITEM_PAYLOAD_VEC by the receiving side. It is +possible to interleave KDBUS_ITEM_PAYLOAD_MEMFD and +KDBUS_ITEM_PAYLOAD_VEC items freely, by the reader they will be +considered a single stream of bytes in the order these items appear in +the message, that just happens to be split up at various places +(regarding rules how they may be split up, see above). The kernel will +refuse taking KDBUS_ITEM_PAYLOAD_MEMFD items that refer to memfds that +are not sealed. + +Note that sealed memfds may be unsealed again if they are not mapped +you have the only fd reference to them. + +Alternatively to sending memfds as KDBUS_ITEM_PAYLOAD_MEMFD items +(where they are just a part of the payload stream of a message) you can +also simply attach any memfd to a message using +KDBUS_ITEM_PAYLOAD_FDS. In this case, the memfd contents is not +considered part of the payload stream of the message, but simply fds +like any other, that happen to be attached to the message. + +MESSAGES FROM THE KERNEL + +A couple of messages previously generated by the dbus1 bus driver are +now generated by the kernel. Since the kernel does not understand the +payload marshaling, they are generated by the kernel in a different +format. This is indicated with the "payload type" field of the +messages set to 0. Library implementations should take these messages +and synthesize traditional driver messages for them on reception. + +More specifically: + + Instead of the NameOwnerChanged, NameLost, NameAcquired signals + there are kernel messages containing KDBUS_ITEM_NAME_ADD, + KDBUS_ITEM_NAME_REMOVE, KDBUS_ITEM_NAME_CHANGE, KDBUS_ITEM_ID_ADD, + KDBUS_ITEM_ID_REMOVE items are generated (each message will contain + exactly one of these items). Note that in libsystemd we have + obsoleted NameLost/NameAcquired messages, since they are entirely + redundant to NameOwnerChanged. This library will hence only + synthesize NameOwnerChanged messages from these kernel messages, + and never generate NameLost/NameAcquired. If your library needs to + stay compatible to the old dbus1 userspace, you possibly might need + to synthesize both a NameOwnerChanged and NameLost/NameAcquired + message from the same kernel message. + + When a method call times out, a KDBUS_ITEM_REPLY_TIMEOUT message is + generated. This should be synthesized into a method error reply + message to the original call. + + When a method call fails because the peer terminated the connection + before responding, a KDBUS_ITEM_REPLY_DEAD message is + generated. Similarly, it should be synthesized into a method error + reply message. + +For synthesized messages we recommend setting the cookie field to +(uint32_t) -1 (and not (uint64_t) -1!), so that the cookie is not 0 +(which the dbus1 spec does not allow), but clearly recognizable as +synthetic. + +Note that the KDBUS_ITEM_NAME_XYZ messages will actually inform you +about all kinds of names, including activatable ones. Classic dbus1 +NameOwnerChanged messages OTOH are only generated when a name is +really acquired on the bus and not just simply activatable. This means +you must explicitly check for the case where an activatable name +becomes acquired or an acquired name is lost and returns to be +activatable. + +NAME REGISTRY + +To acquire names on the bus, use the KDBUS_CMD_NAME_ACQUIRE ioctl(). It +takes a flags field similar to dbus1's RequestName() bus driver call, +however the NO_QUEUE flag got inverted into a QUEUE flag instead. + +To release a previously acquired name use the KDBUS_CMD_NAME_RELEASE +ioctl(). + +To list acquired names use the KDBUS_CMD_CONN_INFO ioctl. It may be +used to list unique names, well known names as well as activatable +names and clients currently queuing for ownership of a well-known +name. The ioctl will return an offset into the memory pool. After +reading all the data you need, you need to release this via the +KDBUS_CMD_FREE ioctl(), similar how you release a received message. + +CREDENTIALS + +kdbus can optionally attach various kinds of metadata about the sender at +the point of time of sending ("credentials") to messages, on request +of the receiver. This is both supported on directed and undirected +(broadcast) messages. The metadata to attach is selected at time of +the HELLO ioctl of the receiver via a flags field (see above). Note +that clients must be able to handle that messages contain more +metadata than they asked for themselves, to simplify implementation of +broadcasting in the kernel. The receiver should not rely on this data +to be around though, even though it will be correct if it happens to +be attached. In order to avoid programming errors in applications, we +recommend though not passing this data on to clients that did not +explicitly ask for it. + +Credentials may also be queried for a well-known or unique name. Use +the KDBUS_CMD_CONN_INFO for this. It will return an offset to the pool +area again, which will contain the same credential items as messages +have attached. Note that when issuing the ioctl, you can select a +different set of credentials to gather, than what was originally requested +for being attached to incoming messages. + +Credentials are always specific to the sender's domain that was +current at the time of sending, and of the process that opened the +bus connection at the time of opening it. Note that this latter data +is cached! + +POLICY + +The kernel enforces only very limited policy on names. It will not do +access filtering by userspace payload, and thus not by interface or +method name. + +This ultimately means that most fine-grained policy enforcement needs +to be done by the receiving process. We recommend using PolicyKit for +any more complex checks. However, libraries should make simple static +policy decisions regarding privileged/unprivileged method calls +easy. We recommend doing this by enabling KDBUS_ATTACH_CAPS and +KDBUS_ATTACH_CREDS for incoming messages, and then discerning client +access by some capability, or if sender and receiver UIDs match. + +BUS ADDRESSES + +When connecting to kdbus use the "kernel:" protocol prefix in DBus +address strings. The device node path is encoded in its "path=" +parameter. + +Client libraries should use the following connection string when +connecting to the system bus: + + kernel:path=/sys/fs/kdbus/0-system/bus;unix:path=/var/run/dbus/system_bus_socket + +This will ensure that kdbus is preferred over the legacy AF_UNIX +socket, but compatibility is kept. For the user bus use: + + kernel:path=/sys/fs/kdbus/$UID-user/bus;unix:path=$XDG_RUNTIME_DIR/bus + +With $UID replaced by the callers numer user ID, and $XDG_RUNTIME_DIR +following the XDG basedir spec. + +Of course the $DBUS_SYSTEM_BUS_ADDRESS and $DBUS_SESSION_BUS_ADDRESS +variables should still take precedence. + +DBUS SERVICE FILES + +Activatable services for kdbus may not use classic dbus1 service +activation files. Instead, programs should drop in native systemd +.service and .busname unit files, so that they are treated uniformly +with other types of units and activation of the system. + +Note that this results in a major difference to classic dbus1: +activatable bus names can be established at any time in the boot process. +This is unlike dbus1 where activatable names are unconditionally available +as long as dbus-daemon is running. Being able to control when +activatable names are established is essential to allow usage of kdbus +during early boot and in initrds, without the risk of triggering +services too early. + +DISCLAIMER + +This all is so far just the status quo. We are putting this together, because +we are quite confident that further API changes will be smaller, but +to make this very clear: this is all subject to change, still! + +We invite you to port over your favorite dbus library to this new +scheme, but please be prepared to make minor changes when we still +change these interfaces! |