summaryrefslogtreecommitdiff
path: root/src/udev/rules/78-sound-card.rules
diff options
context:
space:
mode:
Diffstat (limited to 'src/udev/rules/78-sound-card.rules')
-rw-r--r--src/udev/rules/78-sound-card.rules89
1 files changed, 0 insertions, 89 deletions
diff --git a/src/udev/rules/78-sound-card.rules b/src/udev/rules/78-sound-card.rules
deleted file mode 100644
index e564441893..0000000000
--- a/src/udev/rules/78-sound-card.rules
+++ /dev/null
@@ -1,89 +0,0 @@
-# do not edit this file, it will be overwritten on update
-
-SUBSYSTEM!="sound", GOTO="sound_end"
-
-ACTION=="add|change", KERNEL=="controlC*", ATTR{../uevent}="change"
-ACTION!="change", GOTO="sound_end"
-
-# Ok, we probably need a little explanation here for what the two lines above
-# are good for.
-#
-# The story goes like this: when ALSA registers a new sound card it emits a
-# series of 'add' events to userspace, for the main card device and for all the
-# child device nodes that belong to it. udev relays those to applications,
-# however only maintains the order between father and child, but not between
-# the siblings. The control device node creation can be used as synchronization
-# point. All other devices that belong to a card are created in the kernel
-# before it. However unfortunately due to the fact that siblings are forwarded
-# out of order by udev this fact is lost to applications.
-#
-# OTOH before an application can open a device it needs to make sure that all
-# its device nodes are completely created and set up.
-#
-# As a workaround for this issue we have added the udev rule above which will
-# generate a 'change' event on the main card device from the 'add' event of the
-# card's control device. Due to the ordering semantics of udev this event will
-# only be relayed after all child devices have finished processing properly.
-# When an application needs to listen for appearing devices it can hence look
-# for 'change' events only, and ignore the actual 'add' events.
-#
-# When the application is initialized at the same time as a device is plugged
-# in it may need to figure out if the 'change' event has already been triggered
-# or not for a card. To find that out we store the flag environment variable
-# SOUND_INITIALIZED on the device which simply tells us if the card 'change'
-# event has already been processed.
-
-KERNEL!="card*", GOTO="sound_end"
-
-ENV{SOUND_INITIALIZED}="1"
-
-SUBSYSTEMS=="usb", IMPORT{builtin}="usb_id"
-SUBSYSTEMS=="usb", IMPORT{builtin}="usb-db"
-SUBSYSTEMS=="usb", GOTO="skip_pci"
-
-SUBSYSTEMS=="firewire", ATTRS{vendor_name}=="?*", ATTRS{model_name}=="?*", \
- ENV{ID_BUS}="firewire", ENV{ID_VENDOR}="$attr{vendor_name}", ENV{ID_MODEL}="$attr{model_name}"
-SUBSYSTEMS=="firewire", ATTRS{guid}=="?*", ENV{ID_ID}="firewire-$attr{guid}"
-SUBSYSTEMS=="firewire", GOTO="skip_pci"
-
-
-SUBSYSTEMS=="pci", IMPORT{builtin}="pci-db"
-SUBSYSTEMS=="pci", ENV{ID_BUS}="pci", ENV{ID_VENDOR_ID}="$attr{vendor}", ENV{ID_MODEL_ID}="$attr{device}"
-
-LABEL="skip_pci"
-
-ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="?*", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}-$env{ID_USB_INTERFACE_NUM}-$attr{id}"
-ENV{ID_SERIAL}=="?*", ENV{ID_USB_INTERFACE_NUM}=="", ENV{ID_ID}="$env{ID_BUS}-$env{ID_SERIAL}-$attr{id}"
-
-IMPORT{builtin}="path_id"
-
-# The values used here for $SOUND_FORM_FACTOR and $SOUND_CLASS should be kept
-# in sync with those defined for PulseAudio's src/pulse/proplist.h
-# PA_PROP_DEVICE_FORM_FACTOR, PA_PROP_DEVICE_CLASS properties.
-
-# If the first PCM device of this card has the pcm class 'modem', then the card is a modem
-ATTR{pcmC%nD0p/pcm_class}=="modem", ENV{SOUND_CLASS}="modem", GOTO="sound_end"
-
-# Identify cards on the internal PCI bus as internal
-SUBSYSTEMS=="pci", DEVPATH=="*/0000:00:??.?/sound/*", ENV{SOUND_FORM_FACTOR}="internal", GOTO="sound_end"
-
-# Devices that also support Image/Video interfaces are most likely webcams
-SUBSYSTEMS=="usb", ENV{ID_USB_INTERFACES}=="*:0e????:*", ENV{SOUND_FORM_FACTOR}="webcam", GOTO="sound_end"
-
-# Matching on the model strings is a bit ugly, I admit
-ENV{ID_MODEL}=="*[Ss]peaker*", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end"
-ENV{ID_MODEL_FROM_DATABASE}=="*[Ss]peaker*", ENV{SOUND_FORM_FACTOR}="speaker", GOTO="sound_end"
-
-ENV{ID_MODEL}=="*[Hh]eadphone*", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end"
-ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]eadphone*", ENV{SOUND_FORM_FACTOR}="headphone", GOTO="sound_end"
-
-ENV{ID_MODEL}=="*[Hh]eadset*", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end"
-ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]eadset*", ENV{SOUND_FORM_FACTOR}="headset", GOTO="sound_end"
-
-ENV{ID_MODEL}=="*[Hh]andset*", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end"
-ENV{ID_MODEL_FROM_DATABASE}=="*[Hh]andset*", ENV{SOUND_FORM_FACTOR}="handset", GOTO="sound_end"
-
-ENV{ID_MODEL}=="*[Mm]icrophone*", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end"
-ENV{ID_MODEL_FROM_DATABASE}=="*[Mm]icrophone*", ENV{SOUND_FORM_FACTOR}="microphone", GOTO="sound_end"
-
-LABEL="sound_end"