1 files changed, 0 insertions, 264 deletions
diff --git a/test/TEST-02-CRYPTSETUP/test.sh b/test/TEST-02-CRYPTSETUP/test.sh
deleted file mode 100755
index 790dc3074c..0000000000
--- a/test/TEST-02-CRYPTSETUP/test.sh
+++ /dev/null
@@ -1,264 +0,0 @@
-#!/bin/bash
-# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
-# ex: ts=8 sw=4 sts=4 et filetype=sh
-TEST_DESCRIPTION="cryptsetup systemd setup"
-
-KVERSION=${KVERSION-$(uname -r)}
-KERNEL_VER=$(uname -r)
-
-# Uncomment this to debug failures
-#DEBUGFAIL="systemd.unit=multi-user.target"
-DEBUGTOOLS="df free ls stty cat ps ln ip route dmesg dhclient mkdir cp ping dhclient strace less grep id tty touch du sort"
-
-run_qemu() {
-    # TODO: qemu wrapper script: http://www.spinics.net/lists/kvm/msg72389.html
-    qemu-kvm \
-        -hda $TESTDIR/rootdisk.img \
-        -m 512M -nographic \
-        -net none -kernel /boot/vmlinuz-$KERNEL_VER \
-        -append "root=/dev/sda1 systemd.log_level=debug raid=noautodetect loglevel=2 init=/usr/lib/systemd/systemd ro console=ttyS0,115200n81 selinux=0 $DEBUGFAIL" || return 1
-
-    ret=1
-    mkdir -p $TESTDIR/root
-    mount ${LOOPDEV}p1 $TESTDIR/root
-    [[ -e $TESTDIR/root/testok ]] && ret=0
-    cp -a $TESTDIR/root/failed $TESTDIR
-    cryptsetup luksOpen ${LOOPDEV}p2 varcrypt <$TESTDIR/keyfile
-    mount /dev/mapper/varcrypt $TESTDIR/root/var
-    cp -a $TESTDIR/root/var/log/journal $TESTDIR
-    umount $TESTDIR/root/var
-    umount $TESTDIR/root
-    cryptsetup luksClose /dev/mapper/varcrypt
-    cat $TESTDIR/failed
-    ls -l $TESTDIR/journal/*/*.journal
-    test -s $TESTDIR/failed && ret=$(($ret+1))
-    return $ret
-}
-
-
-test_run() {
-    if check_qemu ; then
-        run_qemu || return 1
-    else
-        dwarn "can't run qemu-kvm, skipping"
-    fi
-    return 0
-}
-
-test_setup() {
-    rm -f $TESTDIR/rootdisk.img
-    # Create the blank file to use as a root filesystem
-    dd if=/dev/null of=$TESTDIR/rootdisk.img bs=1M seek=200
-    LOOPDEV=$(losetup --show -P -f $TESTDIR/rootdisk.img)
-    [ -b $LOOPDEV ] || return 1
-    echo "LOOPDEV=$LOOPDEV" >> $STATEFILE
-    sfdisk -C 6400 -H 2 -S 32 -L $LOOPDEV <<EOF
-,3200
-,
-EOF
-
-    mkfs.ext3 -L systemd ${LOOPDEV}p1
-    echo -n test >$TESTDIR/keyfile
-    cryptsetup -q luksFormat ${LOOPDEV}p2 $TESTDIR/keyfile
-    cryptsetup luksOpen ${LOOPDEV}p2 varcrypt <$TESTDIR/keyfile
-    mkfs.ext3 -L var /dev/mapper/varcrypt
-    mkdir -p $TESTDIR/root
-    mount ${LOOPDEV}p1 $TESTDIR/root
-    mkdir -p $TESTDIR/root/run
-    mkdir -p $TESTDIR/root/var
-    mount /dev/mapper/varcrypt $TESTDIR/root/var
-
-    # Create what will eventually be our root filesystem onto an overlay
-    (
-        LOG_LEVEL=5
-        initdir=$TESTDIR/root
-
-        # create the basic filesystem layout
-        setup_basic_dirs
-
-        # install compiled files
-        (cd ../..; make DESTDIR=$initdir install)
-
-        # remove unneeded documentation
-        rm -fr $initdir/usr/share/{man,doc,gtk-doc}
-
-        # install possible missing libraries
-        for i in $initdir/{sbin,bin}/* $initdir/lib/systemd/*; do
-            inst_libs $i
-        done
-
-        # make a journal directory
-        mkdir -p $initdir/var/log/journal
-
-        # install some basic config files
-        inst /etc/sysconfig/init
-        inst /etc/passwd
-        inst /etc/shadow
-        inst /etc/group
-        inst /etc/shells
-        inst /etc/nsswitch.conf
-        inst /etc/pam.conf
-        inst /etc/securetty
-        inst /etc/os-release
-        inst /etc/localtime
-        # we want an empty environment
-        > $initdir/etc/environment
-        > $initdir/etc/machine-id
-
-        # set the hostname
-        echo  systemd-testsuite > $initdir/etc/hostname
-
-        eval $(udevadm info --export --query=env --name=/dev/mapper/varcrypt)
-        eval $(udevadm info --export --query=env --name=${LOOPDEV}p2)
-
-        cat >$initdir/etc/crypttab <<EOF
-$DM_NAME UUID=$ID_FS_UUID /etc/varkey
-EOF
-        echo -n test > $initdir/etc/varkey
-        cat $initdir/etc/crypttab | ddebug
-
-        cat >$initdir/etc/fstab <<EOF
-LABEL=systemd           /       ext3    rw 0 1
-/dev/mapper/varcrypt    /var    ext3    defaults 0 1
-EOF
-
-        # setup the testsuite target
-        cat >$initdir/etc/systemd/system/testsuite.target <<EOF
-[Unit]
-Description=Testsuite target
-Requires=multi-user.target
-After=multi-user.target
-Conflicts=rescue.target
-AllowIsolate=yes
-EOF
-
-        # setup the testsuite service
-        cat >$initdir/etc/systemd/system/testsuite.service <<EOF
-[Unit]
-Description=Testsuite service
-After=multi-user.target
-
-[Service]
-ExecStart=/bin/bash -c 'set -x; systemctl --failed --no-legend --no-pager > /failed ; echo OK > /testok; while : ;do systemd-cat echo "testsuite service waiting for /var/log/journal" ; echo "testsuite service waiting for journal to move to /var/log/journal" > /dev/console ; for i in /var/log/journal/*;do [ -d "\$i" ] && echo "\$i" && break 2; done; sleep 1; done; sleep 1; exit 0;'
-ExecStopPost=/usr/bin/systemctl poweroff
-Type=oneshot
-EOF
-        mkdir -p $initdir/etc/systemd/system/testsuite.target.wants
-        ln -fs ../testsuite.service $initdir/etc/systemd/system/testsuite.target.wants/testsuite.service
-
-        # make the testsuite the default target
-        ln -fs testsuite.target $initdir/etc/systemd/system/default.target
-        mkdir -p $initdir/etc/rc.d
-        cat >$initdir/etc/rc.d/rc.local <<EOF
-#!/bin/bash
-exit 0
-EOF
-        chmod 0755 $initdir/etc/rc.d/rc.local
-        # install basic tools needed
-        dracut_install sh bash setsid loadkeys setfont \
-            login sushell sulogin gzip sleep echo mount umount cryptsetup
-        dracut_install dmsetup modprobe
-
-        instmods dm_crypt =crypto
-
-        type -P dmeventd >/dev/null && dracut_install dmeventd
-
-        inst_libdir_file "libdevmapper-event.so*"
-
-        inst_rules 10-dm.rules 13-dm-disk.rules 95-dm-notify.rules
-
-        # install libnss_files for login
-        inst_libdir_file "libnss_files*"
-
-        # install dbus and pam
-        find \
-            /etc/dbus-1 \
-            /etc/pam.d \
-            /etc/security \
-            /lib64/security \
-            /lib/security -xtype f \
-            | while read file; do
-            inst $file
-        done
-
-        # install dbus socket and service file
-        inst /usr/lib/systemd/system/dbus.socket
-        inst /usr/lib/systemd/system/dbus.service
-
-        # install basic keyboard maps and fonts
-        for i in \
-            /usr/lib/kbd/consolefonts/latarcyrheb-sun16* \
-            /usr/lib/kbd/keymaps/include/* \
-            /usr/lib/kbd/keymaps/i386/include/* \
-            /usr/lib/kbd/keymaps/i386/qwerty/us.*; do
-                [[ -f $i ]] || continue
-                inst $i
-        done
-
-        # some basic terminfo files
-        for _terminfodir in /lib/terminfo /etc/terminfo /usr/share/terminfo; do
-            [ -f ${_terminfodir}/l/linux ] && break
-        done
-        dracut_install -o ${_terminfodir}/l/linux
-
-        # softlink mtab
-        ln -fs /proc/self/mounts $initdir/etc/mtab
-
-        # install any Exec's from the service files
-        egrep -ho '^Exec[^ ]*=[^ ]+' $initdir/lib/systemd/system/*.service \
-            | while read i; do
-            i=${i##Exec*=}; i=${i##-}
-            inst $i
-        done
-
-        # install plymouth, if found... else remove plymouth service files
-        # if [ -x /usr/libexec/plymouth/plymouth-populate-initrd ]; then
-        #     PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$TEST_BASE_DIR/test-functions" \
-        #         /usr/libexec/plymouth/plymouth-populate-initrd -t $initdir
-        #         dracut_install plymouth plymouthd
-        # else
-        rm -f $initdir/{usr/lib,etc}/systemd/system/plymouth* $initdir/{usr/lib,etc}/systemd/system/*/plymouth*
-        # fi
-
-        # some helper tools for debugging
-        [[ $DEBUGTOOLS ]] && dracut_install $DEBUGTOOLS
-
-        # install ld.so.conf* and run ldconfig
-        cp -a /etc/ld.so.conf* $initdir/etc
-        ldconfig -r "$initdir"
-        ddebug "Strip binaeries"
-        find "$initdir" -perm +111 -type f | xargs strip --strip-unneeded | ddebug
-
-        # copy depmod files
-        inst /lib/modules/$KERNEL_VER/modules.order
-        inst /lib/modules/$KERNEL_VER/modules.builtin
-        # generate module dependencies
-        if [[ -d $initdir/lib/modules/$KERNEL_VER ]] && \
-            ! depmod -a -b "$initdir" $KERNEL_VER; then
-                dfatal "\"depmod -a $KERNEL_VER\" failed."
-                exit 1
-        fi
-    )
-    rm -fr $TESTDIR/nspawn-root
-    ddebug "cp -ar $TESTDIR/root $TESTDIR/nspawn-root"
-    cp -ar $TESTDIR/root $TESTDIR/nspawn-root
-    # we don't mount in the nspawn root
-    rm -fr $TESTDIR/nspawn-root/etc/fstab
-
-    ddebug "umount $TESTDIR/root/var"
-    umount $TESTDIR/root/var
-    cryptsetup luksClose /dev/mapper/varcrypt
-    ddebug "umount $TESTDIR/root"
-    umount $TESTDIR/root
-}
-
-test_cleanup() {
-    umount $TESTDIR/root/var 2>/dev/null
-    [[ -b /dev/mapper/varcrypt ]] && cryptsetup luksClose /dev/mapper/varcrypt
-    umount $TESTDIR/root 2>/dev/null
-    [[ $LOOPDEV ]] && losetup -d $LOOPDEV
-    return 0
-}
-
-. $TEST_BASE_DIR/test-functions
-do_test "$@"