summaryrefslogtreecommitdiff
path: root/test
diff options
context:
space:
mode:
Diffstat (limited to 'test')
-rw-r--r--test/Makefile15
-rw-r--r--test/TEST-01-BASIC/Makefile10
-rwxr-xr-xtest/TEST-01-BASIC/test.sh190
-rw-r--r--test/test-functions636
4 files changed, 850 insertions, 1 deletions
diff --git a/test/Makefile b/test/Makefile
index 9aa46b4eb6..987a32548f 100644
--- a/test/Makefile
+++ b/test/Makefile
@@ -1,7 +1,20 @@
# Just a little hook script to easy building when in this directory
+.PHONY: all check clean
all:
$(MAKE) -C ..
clean:
- $(MAKE) -C .. clean
+ @for i in TEST-[0-9]*; do \
+ [ -d $$i ] || continue ; \
+ [ -f $$i/Makefile ] || continue ; \
+ make -C $$i clean ; \
+ done
+
+check:
+ $(MAKE) -C .. all
+ @for i in TEST-[0-9]*; do \
+ [ -d $$i ] || continue ; \
+ [ -f $$i/Makefile ] || continue ; \
+ make -C $$i all ; \
+ done
diff --git a/test/TEST-01-BASIC/Makefile b/test/TEST-01-BASIC/Makefile
new file mode 100644
index 0000000000..5e89a29eff
--- /dev/null
+++ b/test/TEST-01-BASIC/Makefile
@@ -0,0 +1,10 @@
+all:
+ @make -s --no-print-directory -C ../.. all
+ @basedir=../.. TEST_BASE_DIR=../ ./test.sh --all
+setup:
+ @make --no-print-directory -C ../.. all
+ @basedir=../.. TEST_BASE_DIR=../ ./test.sh --setup
+clean:
+ @basedir=../.. TEST_BASE_DIR=../ ./test.sh --clean
+run:
+ @basedir=../.. TEST_BASE_DIR=../ ./test.sh --run
diff --git a/test/TEST-01-BASIC/test.sh b/test/TEST-01-BASIC/test.sh
new file mode 100755
index 0000000000..13b731d94d
--- /dev/null
+++ b/test/TEST-01-BASIC/test.sh
@@ -0,0 +1,190 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+TEST_DESCRIPTION="Basic systemd setup"
+
+KVERSION=${KVERSION-$(uname -r)}
+
+# Uncomment this to debug failures
+#DEBUGFAIL="systemd.unit=multi-user.target"
+
+test_run() {
+ qemu-kvm \
+ -hda $TESTDIR/rootdisk.img \
+ -m 256M -nographic \
+ -net none -kernel /boot/vmlinuz-$KVERSION \
+ -append "root=/dev/sda1 systemd.log_level=debug raid=noautodetect loglevel=2 init=/usr/lib/systemd/systemd rw console=ttyS0,115200n81 selinux=0 $DEBUGFAIL"
+ ret=1
+ mkdir -p $TESTDIR/root
+ mount ${LOOPDEV}p1 $TESTDIR/root
+ [[ -e $TESTDIR/root/testok ]] && ret=0
+ cp -a $TESTDIR/root/var/log/journal $TESTDIR
+ umount $TESTDIR/root
+ ls -l $TESTDIR/journal/*/*.journal
+ return $ret
+}
+
+test_setup() {
+ rm -f $TESTDIR/rootdisk.img
+ # Create the blank file to use as a root filesystem
+ dd if=/dev/null of=$TESTDIR/rootdisk.img bs=1M seek=100
+ LOOPDEV=$(losetup --show -P -f $TESTDIR/rootdisk.img)
+ [ -b $LOOPDEV ] || return 1
+ echo "LOOPDEV=$LOOPDEV" >> $STATEFILE
+ sfdisk -C 3200 -H 2 -S 32 -L $LOOPDEV <<EOF
+,
+EOF
+
+ mkfs.ext3 -L systemd ${LOOPDEV}p1
+ mkdir -p $TESTDIR/root
+ mount ${LOOPDEV}p1 $TESTDIR/root
+ mkdir -p $TESTDIR/root/run
+
+ kernel=$KVERSION
+ # Create what will eventually be our root filesystem onto an overlay
+ (
+ LOG_LEVEL=5
+ initdir=$TESTDIR/root
+
+ # create the basic filesystem layout
+ setup_basic_dirs
+
+ # install compiled files
+ (cd ../..; make DESTDIR=$initdir install)
+
+ # install possible missing libraries
+ for i in $initdir/{sbin,bin}/* $initdir/lib/systemd/*; do
+ inst_libs $i
+ done
+
+ # activate kmsg import
+ echo 'ImportKernel=yes' >> $initdir/etc/systemd/journald.conf
+
+ # make a journal directory
+ mkdir -p $initdir/var/log/journal
+
+ # install some basic config files
+ inst /etc/sysconfig/init
+ inst /etc/passwd
+ inst /etc/shadow
+ inst /etc/group
+ inst /etc/shells
+ inst /etc/nsswitch.conf
+ inst /etc/pam.conf
+ inst /etc/securetty
+ inst /etc/os-release
+
+ # we want an empty environment
+ > $initdir/etc/environment
+
+ # set the hostname
+ echo systemd-testsuite > $initdir/etc/hostname
+
+ # setup the testsuite target
+ cat >$initdir/etc/systemd/system/testsuite.target <<EOF
+[Unit]
+Description=Testsuite target
+Requires=multi-user.target
+After=multi-user.target
+Conflicts=rescue.target
+AllowIsolate=yes
+EOF
+
+ # setup the testsuite service
+ cat >$initdir/etc/systemd/system/testsuite.service <<EOF
+[Unit]
+Description=Testsuite service
+After=multi-user.target
+
+[Service]
+ExecStart=/bin/sh -c 'echo OK > /testok; /bin/sleep 5'
+ExecStartPost=/usr/sbin/poweroff
+Type=oneshot
+
+EOF
+ mkdir -p $initdir/etc/systemd/system/testsuite.target.wants
+ ln -fs ../testsuite.service $initdir/etc/systemd/system/testsuite.target.wants/testsuite.service
+
+ # make the testsuite the default target
+ ln -fs testsuite.target $initdir/etc/systemd/system/default.target
+
+ # install basic tools needed
+ dracut_install sh bash setsid loadkeys setfont \
+ login sushell sulogin gzip sleep echo
+
+ # install libnss_files for login
+ inst_libdir_file "libnss_files*"
+
+ # install dbus and pam
+ find \
+ /etc/dbus-1 \
+ /etc/pam.d \
+ /etc/security \
+ /lib64/security \
+ /lib/security -xtype f \
+ | while read file; do
+ inst $file
+ done
+
+ # install dbus socket and service file
+ inst /usr/lib/systemd/system/dbus.socket
+ inst /usr/lib/systemd/system/dbus.service
+
+ # install basic keyboard maps and fonts
+ for i in \
+ /usr/lib/kbd/consolefonts/latarcyrheb-sun16* \
+ /usr/lib/kbd/keymaps/include/* \
+ /usr/lib/kbd/keymaps/i386/include/* \
+ /usr/lib/kbd/keymaps/i386/qwerty/us.*; do
+ [[ -f $i ]] || continue
+ inst $i
+ done
+
+ # some basic terminfo files
+ for _terminfodir in /lib/terminfo /etc/terminfo /usr/share/terminfo; do
+ [ -f ${_terminfodir}/l/linux ] && break
+ done
+ dracut_install -o ${_terminfodir}/l/linux
+
+ # softlink mtab
+ ln -fs /proc/self/mounts $initdir/etc/mtab
+
+ # install any Exec's from the service files
+ egrep -ho '^Exec[^ ]*=[^ ]+' $initdir/lib/systemd/system/*.service \
+ | while read i; do
+ i=${i##Exec*=}; i=${i##-}
+ inst $i
+ done
+
+ # install plymouth, if found... else remove plymouth service files
+ if [ -x /usr/libexec/plymouth/plymouth-populate-initrd ]; then
+ PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$TEST_BASE_DIR/test-functions" \
+ /usr/libexec/plymouth/plymouth-populate-initrd -t $initdir
+ dracut_install plymouth plymouthd
+ else
+ rm -f $initdir/usr/lib/systemd/system/plymouth* $initdir/usr/lib/systemd/system/*/plymouth*
+ fi
+
+ # some helper tools for debugging
+ dracut_install sh df free ls shutdown poweroff \
+ stty cat ps ln ip route \
+ mount dmesg dhclient mkdir cp ping dhclient \
+ umount strace less grep
+
+ # install ld.so.conf* and run ldconfig
+ cp -a /etc/ld.so.conf* $initdir/etc
+ ldconfig -r "$initdir"
+
+ )
+ umount $TESTDIR/root
+
+}
+
+test_cleanup() {
+ umount $TESTDIR/root 2>/dev/null
+ [[ $LOOPDEV ]] && losetup -d $LOOPDEV
+ return 0
+}
+
+. $TEST_BASE_DIR/test-functions
+do_test "$@"
diff --git a/test/test-functions b/test/test-functions
new file mode 100644
index 0000000000..d0c5f6ca9e
--- /dev/null
+++ b/test/test-functions
@@ -0,0 +1,636 @@
+#!/bin/bash
+# -*- mode: shell-script; indent-tabs-mode: nil; sh-basic-offset: 4; -*-
+# ex: ts=8 sw=4 sts=4 et filetype=sh
+PATH=/sbin:/bin:/usr/sbin:/usr/bin
+export PATH
+
+setup_basic_dirs() {
+ for d in usr/bin usr/sbin bin etc lib "$libdir" sbin tmp usr var var/log; do
+ [[ -e "${initdir}${prefix}/$d" ]] && continue
+ if [ -L "/$d" ]; then
+ inst_symlink "/$d" "${prefix}/$d"
+ else
+ mkdir -m 0755 -p "${initdir}${prefix}/$d"
+ fi
+ done
+
+ for d in dev proc sys sysroot root run run/lock run/initramfs; do
+ if [ -L "/$d" ]; then
+ inst_symlink "/$d"
+ else
+ mkdir -m 0755 -p "$initdir/$d"
+ fi
+ done
+
+ ln -sfn /run "$initdir/var/run"
+ ln -sfn /run/lock "$initdir/var/lock"
+}
+
+inst_libs() {
+ local _bin=$1
+ local _so_regex='([^ ]*/lib[^/]*/[^ ]*\.so[^ ]*)'
+ local _file _line
+
+ LC_ALL=C ldd "$_bin" 2>/dev/null | while read _line; do
+ [[ $_line = 'not a dynamic executable' ]] && break
+
+ if [[ $_line =~ $_so_regex ]]; then
+ _file=${BASH_REMATCH[1]}
+ [[ -e ${initdir}/$_file ]] && continue
+ inst_library "$_file"
+ continue
+ fi
+
+ if [[ $_line =~ not\ found ]]; then
+ dfatal "Missing a shared library required by $_bin."
+ dfatal "Run \"ldd $_bin\" to find out what it is."
+ dfatal "$_line"
+ dfatal "dracut cannot create an initrd."
+ exit 1
+ fi
+ done
+}
+
+import_testdir() {
+ STATEFILE=".testdir"
+ [[ -e $STATEFILE ]] && . $STATEFILE
+ if [[ -z "$TESTDIR" ]] || [[ ! -d "$TESTDIR" ]]; then
+ TESTDIR=$(mktemp --tmpdir=/var/tmp -d -t systemd-test.XXXXXX)
+ echo "TESTDIR=\"$TESTDIR\"" > $STATEFILE
+ export TESTDIR
+ fi
+}
+
+## @brief Converts numeric logging level to the first letter of level name.
+#
+# @param lvl Numeric logging level in range from 1 to 6.
+# @retval 1 if @a lvl is out of range.
+# @retval 0 if @a lvl is correct.
+# @result Echoes first letter of level name.
+_lvl2char() {
+ case "$1" in
+ 1) echo F;;
+ 2) echo E;;
+ 3) echo W;;
+ 4) echo I;;
+ 5) echo D;;
+ 6) echo T;;
+ *) return 1;;
+ esac
+}
+
+## @brief Internal helper function for _do_dlog()
+#
+# @param lvl Numeric logging level.
+# @param msg Message.
+# @retval 0 It's always returned, even if logging failed.
+#
+# @note This function is not supposed to be called manually. Please use
+# dtrace(), ddebug(), or others instead which wrap this one.
+#
+# This function calls _do_dlog() either with parameter msg, or if
+# none is given, it will read standard input and will use every line as
+# a message.
+#
+# This enables:
+# dwarn "This is a warning"
+# echo "This is a warning" | dwarn
+LOG_LEVEL=4
+
+dlog() {
+ [ -z "$LOG_LEVEL" ] && return 0
+ [ $1 -le $LOG_LEVEL ] || return 0
+ local lvl="$1"; shift
+ local lvlc=$(_lvl2char "$lvl") || return 0
+
+ if [ $# -ge 1 ]; then
+ echo "$lvlc: $*"
+ else
+ while read line; do
+ echo "$lvlc: " "$line"
+ done
+ fi
+}
+
+## @brief Logs message at TRACE level (6)
+#
+# @param msg Message.
+# @retval 0 It's always returned, even if logging failed.
+dtrace() {
+ set +x
+ dlog 6 "$@"
+ [ -n "$debug" ] && set -x || :
+}
+
+## @brief Logs message at DEBUG level (5)
+#
+# @param msg Message.
+# @retval 0 It's always returned, even if logging failed.
+ddebug() {
+ set +x
+ dlog 5 "$@"
+ [ -n "$debug" ] && set -x || :
+}
+
+## @brief Logs message at INFO level (4)
+#
+# @param msg Message.
+# @retval 0 It's always returned, even if logging failed.
+dinfo() {
+ set +x
+ dlog 4 "$@"
+ [ -n "$debug" ] && set -x || :
+}
+
+## @brief Logs message at WARN level (3)
+#
+# @param msg Message.
+# @retval 0 It's always returned, even if logging failed.
+dwarn() {
+ set +x
+ dlog 3 "$@"
+ [ -n "$debug" ] && set -x || :
+}
+
+## @brief Logs message at ERROR level (2)
+#
+# @param msg Message.
+# @retval 0 It's always returned, even if logging failed.
+derror() {
+ set +x
+ dlog 2 "$@"
+ [ -n "$debug" ] && set -x || :
+}
+
+## @brief Logs message at FATAL level (1)
+#
+# @param msg Message.
+# @retval 0 It's always returned, even if logging failed.
+dfatal() {
+ set +x
+ dlog 1 "$@"
+ [ -n "$debug" ] && set -x || :
+}
+
+
+# Generic substring function. If $2 is in $1, return 0.
+strstr() { [ "${1#*$2*}" != "$1" ]; }
+
+# normalize_path <path>
+# Prints the normalized path, where it removes any duplicated
+# and trailing slashes.
+# Example:
+# $ normalize_path ///test/test//
+# /test/test
+normalize_path() {
+ shopt -q -s extglob
+ set -- "${1//+(\/)//}"
+ shopt -q -u extglob
+ echo "${1%/}"
+}
+
+# convert_abs_rel <from> <to>
+# Prints the relative path, when creating a symlink to <to> from <from>.
+# Example:
+# $ convert_abs_rel /usr/bin/test /bin/test-2
+# ../../bin/test-2
+# $ ln -s $(convert_abs_rel /usr/bin/test /bin/test-2) /usr/bin/test
+convert_abs_rel() {
+ local __current __absolute __abssize __cursize __newpath
+ local -i __i __level
+
+ set -- "$(normalize_path "$1")" "$(normalize_path "$2")"
+
+ # corner case #1 - self looping link
+ [[ "$1" == "$2" ]] && { echo "${1##*/}"; return; }
+
+ # corner case #2 - own dir link
+ [[ "${1%/*}" == "$2" ]] && { echo "."; return; }
+
+ IFS="/" __current=($1)
+ IFS="/" __absolute=($2)
+
+ __abssize=${#__absolute[@]}
+ __cursize=${#__current[@]}
+
+ while [[ ${__absolute[__level]} == ${__current[__level]} ]]
+ do
+ (( __level++ ))
+ if (( __level > __abssize || __level > __cursize ))
+ then
+ break
+ fi
+ done
+
+ for ((__i = __level; __i < __cursize-1; __i++))
+ do
+ if ((__i > __level))
+ then
+ __newpath=$__newpath"/"
+ fi
+ __newpath=$__newpath".."
+ done
+
+ for ((__i = __level; __i < __abssize; __i++))
+ do
+ if [[ -n $__newpath ]]
+ then
+ __newpath=$__newpath"/"
+ fi
+ __newpath=$__newpath${__absolute[__i]}
+ done
+
+ echo "$__newpath"
+}
+
+
+# Install a directory, keeping symlinks as on the original system.
+# Example: if /lib points to /lib64 on the host, "inst_dir /lib/file"
+# will create ${initdir}/lib64, ${initdir}/lib64/file,
+# and a symlink ${initdir}/lib -> lib64.
+inst_dir() {
+ [[ -e ${initdir}/"$1" ]] && return 0 # already there
+
+ local _dir="$1" _part="${1%/*}" _file
+ while [[ "$_part" != "${_part%/*}" ]] && ! [[ -e "${initdir}/${_part}" ]]; do
+ _dir="$_part $_dir"
+ _part=${_part%/*}
+ done
+
+ # iterate over parent directories
+ for _file in $_dir; do
+ [[ -e "${initdir}/$_file" ]] && continue
+ if [[ -L $_file ]]; then
+ inst_symlink "$_file"
+ else
+ # create directory
+ mkdir -m 0755 -p "${initdir}/$_file" || return 1
+ [[ -e "$_file" ]] && chmod --reference="$_file" "${initdir}/$_file"
+ chmod u+w "${initdir}/$_file"
+ fi
+ done
+}
+
+# $1 = file to copy to ramdisk
+# $2 (optional) Name for the file on the ramdisk
+# Location of the image dir is assumed to be $initdir
+# We never overwrite the target if it exists.
+inst_simple() {
+ [[ -f "$1" ]] || return 1
+ strstr "$1" "/" || return 1
+
+ local _src=$1 target="${2:-$1}"
+ if ! [[ -d ${initdir}/$target ]]; then
+ [[ -e ${initdir}/$target ]] && return 0
+ [[ -L ${initdir}/$target ]] && return 0
+ [[ -d "${initdir}/${target%/*}" ]] || inst_dir "${target%/*}"
+ fi
+ # install checksum files also
+ if [[ -e "${_src%/*}/.${_src##*/}.hmac" ]]; then
+ inst "${_src%/*}/.${_src##*/}.hmac" "${target%/*}/.${target##*/}.hmac"
+ fi
+ ddebug "Installing $_src"
+ cp --sparse=always -pfL "$_src" "${initdir}/$target"
+}
+
+# find symlinks linked to given library file
+# $1 = library file
+# Function searches for symlinks by stripping version numbers appended to
+# library filename, checks if it points to the same target and finally
+# prints the list of symlinks to stdout.
+#
+# Example:
+# rev_lib_symlinks libfoo.so.8.1
+# output: libfoo.so.8 libfoo.so
+# (Only if libfoo.so.8 and libfoo.so exists on host system.)
+rev_lib_symlinks() {
+ [[ ! $1 ]] && return 0
+
+ local fn="$1" orig="$(readlink -f "$1")" links=''
+
+ [[ ${fn} =~ .*\.so\..* ]] || return 1
+
+ until [[ ${fn##*.} == so ]]; do
+ fn="${fn%.*}"
+ [[ -L ${fn} && $(readlink -f "${fn}") == ${orig} ]] && links+=" ${fn}"
+ done
+
+ echo "${links}"
+}
+
+# Same as above, but specialized to handle dynamic libraries.
+# It handles making symlinks according to how the original library
+# is referenced.
+inst_library() {
+ local _src="$1" _dest=${2:-$1} _lib _reallib _symlink
+ strstr "$1" "/" || return 1
+ [[ -e $initdir/$_dest ]] && return 0
+ if [[ -L $_src ]]; then
+ # install checksum files also
+ if [[ -e "${_src%/*}/.${_src##*/}.hmac" ]]; then
+ inst "${_src%/*}/.${_src##*/}.hmac" "${_dest%/*}/.${_dest##*/}.hmac"
+ fi
+ _reallib=$(readlink -f "$_src")
+ inst_simple "$_reallib" "$_reallib"
+ inst_dir "${_dest%/*}"
+ [[ -d "${_dest%/*}" ]] && _dest=$(readlink -f "${_dest%/*}")/${_dest##*/}
+ ln -sfn $(convert_abs_rel "${_dest}" "${_reallib}") "${initdir}/${_dest}"
+ else
+ inst_simple "$_src" "$_dest"
+ fi
+
+ # Create additional symlinks. See rev_symlinks description.
+ for _symlink in $(rev_lib_symlinks $_src) $(rev_lib_symlinks $_reallib); do
+ [[ ! -e $initdir/$_symlink ]] && {
+ ddebug "Creating extra symlink: $_symlink"
+ inst_symlink $_symlink
+ }
+ done
+}
+
+# find a binary. If we were not passed the full path directly,
+# search in the usual places to find the binary.
+find_binary() {
+ if [[ -z ${1##/*} ]]; then
+ if [[ -x $1 ]] || { strstr "$1" ".so" && ldd $1 &>/dev/null; }; then
+ echo $1
+ return 0
+ fi
+ fi
+
+ type -P $1
+}
+
+# Same as above, but specialized to install binary executables.
+# Install binary executable, and all shared library dependencies, if any.
+inst_binary() {
+ local _bin _target
+ _bin=$(find_binary "$1") || return 1
+ _target=${2:-$_bin}
+ [[ -e $initdir/$_target ]] && return 0
+ [[ -L $_bin ]] && inst_symlink $_bin $_target && return 0
+ local _file _line
+ local _so_regex='([^ ]*/lib[^/]*/[^ ]*\.so[^ ]*)'
+ # I love bash!
+ LC_ALL=C ldd "$_bin" 2>/dev/null | while read _line; do
+ [[ $_line = 'not a dynamic executable' ]] && break
+
+ if [[ $_line =~ $_so_regex ]]; then
+ _file=${BASH_REMATCH[1]}
+ [[ -e ${initdir}/$_file ]] && continue
+ inst_library "$_file"
+ continue
+ fi
+
+ if [[ $_line =~ not\ found ]]; then
+ dfatal "Missing a shared library required by $_bin."
+ dfatal "Run \"ldd $_bin\" to find out what it is."
+ dfatal "$_line"
+ dfatal "dracut cannot create an initrd."
+ exit 1
+ fi
+ done
+ inst_simple "$_bin" "$_target"
+}
+
+# same as above, except for shell scripts.
+# If your shell script does not start with shebang, it is not a shell script.
+inst_script() {
+ local _bin
+ _bin=$(find_binary "$1") || return 1
+ shift
+ local _line _shebang_regex
+ read -r -n 80 _line <"$_bin"
+ # If debug is set, clean unprintable chars to prevent messing up the term
+ [[ $debug ]] && _line=$(echo -n "$_line" | tr -c -d '[:print:][:space:]')
+ _shebang_regex='(#! *)(/[^ ]+).*'
+ [[ $_line =~ $_shebang_regex ]] || return 1
+ inst "${BASH_REMATCH[2]}" && inst_simple "$_bin" "$@"
+}
+
+# same as above, but specialized for symlinks
+inst_symlink() {
+ local _src=$1 _target=${2:-$1} _realsrc
+ strstr "$1" "/" || return 1
+ [[ -L $1 ]] || return 1
+ [[ -L $initdir/$_target ]] && return 0
+ _realsrc=$(readlink -f "$_src")
+ if ! [[ -e $initdir/$_realsrc ]]; then
+ if [[ -d $_realsrc ]]; then
+ inst_dir "$_realsrc"
+ else
+ inst "$_realsrc"
+ fi
+ fi
+ [[ ! -e $initdir/${_target%/*} ]] && inst_dir "${_target%/*}"
+ [[ -d ${_target%/*} ]] && _target=$(readlink -f ${_target%/*})/${_target##*/}
+ ln -sfn $(convert_abs_rel "${_target}" "${_realsrc}") "$initdir/$_target"
+}
+
+# attempt to install any programs specified in a udev rule
+inst_rule_programs() {
+ local _prog _bin
+
+ if grep -qE 'PROGRAM==?"[^ "]+' "$1"; then
+ for _prog in $(grep -E 'PROGRAM==?"[^ "]+' "$1" | sed -r 's/.*PROGRAM==?"([^ "]+).*/\1/'); do
+ if [ -x /lib/udev/$_prog ]; then
+ _bin=/lib/udev/$_prog
+ else
+ _bin=$(find_binary "$_prog") || {
+ dinfo "Skipping program $_prog using in udev rule $(basename $1) as it cannot be found"
+ continue;
+ }
+ fi
+
+ #dinfo "Installing $_bin due to it's use in the udev rule $(basename $1)"
+ dracut_install "$_bin"
+ done
+ fi
+}
+
+# udev rules always get installed in the same place, so
+# create a function to install them to make life simpler.
+inst_rules() {
+ local _target=/etc/udev/rules.d _rule _found
+
+ inst_dir "/lib/udev/rules.d"
+ inst_dir "$_target"
+ for _rule in "$@"; do
+ if [ "${rule#/}" = "$rule" ]; then
+ for r in /lib/udev/rules.d /etc/udev/rules.d; do
+ if [[ -f $r/$_rule ]]; then
+ _found="$r/$_rule"
+ inst_simple "$_found"
+ inst_rule_programs "$_found"
+ fi
+ done
+ fi
+ for r in '' ./ $dracutbasedir/rules.d/; do
+ if [[ -f ${r}$_rule ]]; then
+ _found="${r}$_rule"
+ inst_simple "$_found" "$_target/${_found##*/}"
+ inst_rule_programs "$_found"
+ fi
+ done
+ [[ $_found ]] || dinfo "Skipping udev rule: $_rule"
+ done
+}
+
+# general purpose installation function
+# Same args as above.
+inst() {
+ local _x
+
+ case $# in
+ 1) ;;
+ 2) [[ ! $initdir && -d $2 ]] && export initdir=$2
+ [[ $initdir = $2 ]] && set $1;;
+ 3) [[ -z $initdir ]] && export initdir=$2
+ set $1 $3;;
+ *) dfatal "inst only takes 1 or 2 or 3 arguments"
+ exit 1;;
+ esac
+ for _x in inst_symlink inst_script inst_binary inst_simple; do
+ $_x "$@" && return 0
+ done
+ return 1
+}
+
+# install any of listed files
+#
+# If first argument is '-d' and second some destination path, first accessible
+# source is installed into this path, otherwise it will installed in the same
+# path as source. If none of listed files was installed, function return 1.
+# On first successful installation it returns with 0 status.
+#
+# Example:
+#
+# inst_any -d /bin/foo /bin/bar /bin/baz
+#
+# Lets assume that /bin/baz exists, so it will be installed as /bin/foo in
+# initramfs.
+inst_any() {
+ local to f
+
+ [[ $1 = '-d' ]] && to="$2" && shift 2
+
+ for f in "$@"; do
+ if [[ -e $f ]]; then
+ [[ $to ]] && inst "$f" "$to" && return 0
+ inst "$f" && return 0
+ fi
+ done
+
+ return 1
+}
+
+# dracut_install [-o ] <file> [<file> ... ]
+# Install <file> to the initramfs image
+# -o optionally install the <file> and don't fail, if it is not there
+dracut_install() {
+ local _optional=no
+ if [[ $1 = '-o' ]]; then
+ _optional=yes
+ shift
+ fi
+ while (($# > 0)); do
+ if ! inst "$1" ; then
+ if [[ $_optional = yes ]]; then
+ dinfo "Skipping program $1 as it cannot be found and is" \
+ "flagged to be optional"
+ else
+ dfatal "Failed to install $1"
+ exit 1
+ fi
+ fi
+ shift
+ done
+}
+
+
+# inst_libdir_file [-n <pattern>] <file> [<file>...]
+# Install a <file> located on a lib directory to the initramfs image
+# -n <pattern> install non-matching files
+inst_libdir_file() {
+ if [[ "$1" == "-n" ]]; then
+ local _pattern=$1
+ shift 2
+ for _dir in $libdirs; do
+ for _i in "$@"; do
+ for _f in "$_dir"/$_i; do
+ [[ "$_i" =~ $_pattern ]] || continue
+ [[ -e "$_i" ]] && dracut_install "$_i"
+ done
+ done
+ done
+ else
+ for _dir in $libdirs; do
+ for _i in "$@"; do
+ for _f in "$_dir"/$_i; do
+ [[ -e "$_f" ]] && dracut_install "$_f"
+ done
+ done
+ done
+ fi
+}
+
+do_test() {
+ [[ $UID != "0" ]] && exit 0
+ command -v qemu-kvm &>/dev/null || exit 0
+# Detect lib paths
+ [[ $libdir ]] || for libdir in /lib64 /lib; do
+ [[ -d $libdir ]] && libdirs+=" $libdir" && break
+ done
+
+ [[ $usrlibdir ]] || for usrlibdir in /usr/lib64 /usr/lib; do
+ [[ -d $usrlibdir ]] && libdirs+=" $usrlibdir" && break
+ done
+
+ import_testdir
+
+ while (($# > 0)); do
+ case $1 in
+ --run)
+ echo "TEST RUN: $TEST_DESCRIPTION"
+ test_run
+ ret=$?
+ if [ $ret -eq 0 ]; then
+ echo "TEST RUN: $TEST_DESCRIPTION [OK]"
+ else
+ echo "TEST RUN: $TEST_DESCRIPTION [FAILED]"
+ fi
+ exit $ret;;
+ --setup)
+ echo "TEST SETUP: $TEST_DESCRIPTION"
+ test_setup
+ exit $?;;
+ --clean)
+ echo "TEST CLEANUP: $TEST_DESCRIPTION"
+ test_cleanup
+ rm -fr "$TESTDIR"
+ rm -f .testdir
+ exit $?;;
+ --all)
+ echo -n "TEST: $TEST_DESCRIPTION ";
+ (
+ test_setup && test_run
+ ret=$?
+ test_cleanup
+ rm -fr "$TESTDIR"
+ rm -f .testdir
+ exit $ret
+ ) </dev/null >test.log 2>&1
+ ret=$?
+ if [ $ret -eq 0 ]; then
+ rm test.log
+ echo "[OK]"
+ else
+ echo "[FAILED]"
+ echo "see $(pwd)/test.log"
+ fi
+ exit $ret;;
+ *) break ;;
+ esac
+ shift
+ done
+}