| Age | Commit message (Collapse) | Author |
|---|
|
The unifont layer of libsystemd-terminal provides a fallback font for
situations where no system-fonts are available, or if you don't want to
deal with traditional font-formats for some reasons.
The unifont API mmaps a pre-compiled bitmap font that was generated out of
GNU-Unifont font-data. This guarantees, that all users of the font will
share the pages in memory. Furthermore, the layout of the binary file
allows accessing glyph data in O(1) without pre-rendering glyphs etc. That
is, the OS can skip loading pages for glyphs that we never access.
Note that this is currently a test-run and we want to include the binary
file in the GNU-Unifont package. However, until it was considered stable
and accepted by the maintainers, we will ship it as part of systemd. So
far it's only enabled with the experimental --enable-terminal, anyway.
|
|
The systemd-subterm example is a stacked terminal that shows how to
use sd-term. Instead of rendering images and displaying it via X11/etc.,
it uses its parent terminal to display the page (terminal-emulator inside
a terminal-emulator) (like GNU-screen and friends do).
This is only for testing and not installed system-wide!
|
|
The term-parser is used to parse any input from TTY-clients. It reads CSI,
DCS, OSC and ST control sequences and normal escape sequences. It doesn't
do anything with the parsed data besides detecting the sequence and
returning it. The caller has to react to them.
The parser also comes with its own UTF-8 helpers. The reason for that is
that we don't want to assert() or hard-fail on parsing errors. Instead,
we treat any invalid UTF-8 sequences as ISO-8859-1. This allows pasting
invalid data into a terminal (which cannot be controlled through the TTY,
anyway) and we still deal with it in a proper manner.
This is _required_ for 8-bit and 7-bit DEC modes (including the g0-g3
mappings), so it's not just an ugly fallback because we can (it's still
horribly ugly but at least we have an excuse).
|
|
This commit introduces libsystemd-ui, a systemd-internal helper library
that will contain all the UI related functionality. It is going to be used
by systemd-welcomed, systemd-consoled, systemd-greeter and systemd-er.
Further use-cases may follow.
For now, this commit only adds terminal-page handling based on lines only.
Follow-up commits will add more functionality.
|
|
This Pty API wraps the ugliness that is POSIX PTY. It takes care of:
- edge-triggered HUP handling (avoid heavy CPU-usage on vhangup)
- HUP vs. input-queue draining (handle HUP _after_ draining the whole
input queue)
- SIGCHLD vs. HUP (HUP is no reliable way to catch PTY deaths, always
use SIGCHLD. Otherwise, vhangup() and friends will break.)
- Output queue buffering (async EPOLLOUT handling)
- synchronous setup (via Barrier API)
At the same time, the PTY API does not execve(). It simply fork()s and
leaves everything else to the caller. Usually, they execve() but we
support other setups, too.
This will be needed by multiple UI binaries (systemd-console, systemd-er,
...) so it's placed in src/shared/. It's not strictly related to
libsystemd-terminal, so it's not included there.
|
|
The "Barrier" object is a simple inter-process barrier implementation. It
allows placing synchronization points and waiting for the other side to
reach it. Additionally, it has an abortion-mechanism as second-layer
synchronization to send abortion-events asynchronously to the other side.
The API is usually used to synchronize processes during fork(). However,
it can be extended to pass state through execve() so you could synchronize
beyond execve().
Usually, it's used like this (error-handling replaced by assert() for
simplicity):
Barrier b;
r = barrier_init(&b);
assert_se(r >= 0);
pid = fork();
assert_se(pid >= 0);
if (pid == 0) {
barrier_set_role(&b, BARRIER_CHILD);
...do child post-setup...
if (CHILD_SETUP_FAILED)
exit(1);
...child setup done...
barrier_place(&b);
if (!barrier_sync(&b)) {
/* parent setup failed */
exit(1);
}
barrier_destroy(&b); /* redundant as execve() and exit() imply this */
/* parent & child setup successful */
execve(...);
}
barrier_set_role(&b, BARRIER_PARENT);
...do parent post-setup...
if (PARENT_SETUP_FAILED) {
barrier_abort(&b); /* send abortion event */
barrier_wait_abortion(&b); /* wait for child to abort (exit() implies abortion) */
barrier_destroy(&b);
...bail out...
}
...parent setup done...
barrier_place(&b);
if (!barrier_sync(&b)) {
...child setup failed... ;
barrier_destroy(&b);
...bail out...
}
barrier_destroy(&b);
...child setup successfull...
This is the most basic API. Using barrier_place() to place barriers and
barrier_sync() to perform a full synchronization between both processes.
barrier_abort() places an abortion barrier which superceeds any other
barriers, exit() (or barrier_destroy()) places an abortion-barrier that
queues behind existing barriers (thus *not* replacing existing barriers
unlike barrier_abort()).
This example uses hard-synchronization with wait_abortion(), sync() and
friends. These are all optional. Barriers are highly dynamic and can be
used for one-way synchronization or even no synchronization at all
(postponing it for later). The sync() call performs a full two-way
synchronization.
The API is documented and should be fairly self-explanatory. A test-suite
shows some special semantics regarding abortion, wait_next() and exit().
Internally, barriers use two eventfds and a pipe. The pipe is used to
detect exit()s of the remote side as eventfds do not allow that. The
eventfds are used to place barriers, one for each side. Barriers itself
are numbered, but the numbers are reused once both sides reached the same
barrier, thus you cannot address barriers by the index. Moreover, the
numbering is implicit and we only store a counter. This makes the
implementation itself very lightweight, which is probably negligible
considering that we need 3 FDs for a barrier..
Last but not least: This barrier implementation is quite heavy. It's
definitely not meant for fast IPC synchronization. However, it's very easy
to use. And given the *HUGE* overhead of fork(), the barrier-overhead
should be negligible.
|
|
One missing string found.
A few things had to be moved around to make it possible to test them.
|
|
|
|
Let's turn resolved into a something truly useful: a fully asynchronous
DNS stub resolver that subscribes to network changes.
(More to come: caching, LLMNR, mDNS/DNS-SD, DNSSEC, IDN, NSS module)
|
|
vim places them in the source-tree while editing files. Ignore them.
|
|
|
|
Add various options for making it easy unescape, or mangle, or format as
template instance or append a suffix.
|
|
ConditionFirstBoot= instead
As Zbigniew pointed out a new ConditionFirstBoot= appears like the nicer
way to hook in systemd-firstboot.service on first boots (those with /etc
unpopulated), so let's do this, and get rid of the generator again.
|
|
or when creating OS images offline
A new tool "systemd-firstboot" can be used either interactively on boot,
where it will query basic locale, timezone, hostname, root password
information and set it. Or it can be used non-interactively from the
command line when prepareing disk images for booting. When used
non-inertactively the tool can either copy settings from the host, or
take settings on the command line.
$ systemd-firstboot --root=/path/to/my/new/root --copy-locale --copy-root-password --hostname=waldi
The tool will be automatically invoked (interactively) now on first boot
if /etc is found unpopulated.
This also creates the infrastructure for generators to be notified via
an environment variable whether they are running on the first boot, or
not.
|
|
This is useful to test the behaviour of the compressor for various buffer
sizes.
Time is limited to a minute per compression, since otherwise, when LZ4
takes more than a second which is necessary to reduce the noise, XZ
takes more than 10 minutes.
% build/test-compress-benchmark (without time limit)
XZ: compressed & decompressed 2535300963 bytes in 794.57s (3.04MiB/s), mean compresion 99.95%, skipped 3570 bytes
LZ4: compressed & decompressed 2535303543 bytes in 1.56s (1550.07MiB/s), mean compresion 99.60%, skipped 990 bytes
% build/test-compress-benchmark (with time limit)
XZ: compressed & decompressed 174321481 bytes in 60.02s (2.77MiB/s), mean compresion 99.76%, skipped 3570 bytes
LZ4: compressed & decompressed 2535303543 bytes in 1.63s (1480.83MiB/s), mean compresion 99.60%, skipped 990 bytes
It appears that there's a bug in lzma_end where it leaks 32 bytes.
|
|
file-hierarchy(7)
This new tool is based on "sd-path", a new (so far unexported) API for
libsystemd, that can hopefully grow into a workable API covering /opt
and more one day.
|
|
When disk space taken up by coredumps grows beyond a configured limit
start removing the oldest coredump of the user with the most coredumps,
until we get below the limit again.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
debug-generator can mask specific units if they are specified on the
kernel command line with systemd.mask=.
debug-generator can pull in debug-shell.service is systemd.debug-shell
is passed on the kernel command line.
|
|
Drop the "systemd-" prefix, renaming it from "systemd-coredumpctl" to
"coredumpctl".
|
|
|
|
|
|
|
|
/usr has changed
In order to support offline updates to /usr, we need to be able to run
certain tasks on next boot-up to bring /etc and /var in line with the
updated /usr. Hence, let's devise a mechanism how we can detect whether
/etc or /var are not up-to-date with /usr anymore: we keep "touch
files" in /etc/.updated and /var/.updated that are mtime-compared with
/usr. This means:
Whenever the vendor OS tree in /usr is updated, and any services that
shall be executed at next boot shall be triggered, it is sufficient to
update the mtime of /usr itself. At next boot, if /etc/.updated and/or
/var/.updated is older than than /usr (or missing), we know we have to
run the update tools once. After that is completed we need to update the
mtime of these files to the one of /usr, to keep track that we made the
necessary updates, and won't repeat them on next reboot.
A subsequent commit adds a new ConditionNeedsUpdate= condition that
allows checking on boot whether /etc or /var are outdated and need
updating.
This is an early step to allow booting up with an empty /etc, with
automatic rebuilding of the necessary cache files or user databases
therein, as well as supporting later updates of /usr that then propagate
to /etc and /var again.
|
|
static files
systemd-sysusers is a tool to reconstruct /etc/passwd and /etc/group
from static definition files that take a lot of inspiration from
tmpfiles snippets. These snippets should carry information about system
users only. To make sure it is not misused for normal users these
snippets only allow configuring UID and gecos field for each user, but
do not allow configuration of the home directory or shell, which is
necessary for real login users.
The purpose of this tool is to enable state-less systems that can
populate /etc with the minimal files necessary, solely from static data
in /usr. systemd-sysuser is additive only, and will never override
existing users.
This tool will create these files directly, and not via some user
database abtsraction layer. This is appropriate as this tool is supposed
to run really early at boot, and is only useful for creating system
users, and system users cannot be stored in remote databases anyway.
The tool is also useful to be invoked from RPM scriptlets, instead of
useradd. This allows moving from imperative user descriptions in RPM to
declarative descriptions.
The UID/GID for a user/group to be created can either be chosen dynamic,
or fixed, or be read from the owner of a file in the file system, in
order to support reconstructing the correct IDs for files that shall be
owned by them.
This also adds a minimal user definition file, that should be
sufficient for most basic systems. Distributions are expected to patch
these files and augment the contents, for example with fixed UIDs for
the users where that's necessary.
|
|
Reuses logic from service.c and the rc-local generator.
Note that this drops reading of chkconfig entirely. It also drops reading
runlevels from the LSB headers. The runlevels were only used to check for
runlevels outside of the normal 1-5 range and then add special dependencies
and settings. Special runlevels were dropped in the past so it seemed to be
unused code.
The generator does not know about non-generated units with a value set with
SysVStartPriority=. These are therefor not taken into account when converting
start priority to before/after.
|
|
Also remove the equivalent functionality from networkd.
|
|
|
|
New "struct ring" object that implements a basic ring buffer for arbitrary
byte-streams. A new basic runtime test is also added.
This will be needed for our pty helpers for systemd-console and friends.
|
|
|
|
|
|
|
|
them fully log out
|
|
|
|
|
|
|
|
signal(7) provides a list of functions which may be called from a
signal handler. Other functions, which only call those functions and
don't access global memory and are reentrant are also safe.
sd_j_sendv was mostly OK, but would call mkostemp and writev in a
fallback path, which are unsafe.
Being able to call sd_j_sendv in a async-signal-safe way is important
because it allows it be used in signal handlers.
Safety is achieved by replacing mkostemp with open(O_TMPFILE) and an
open-coded writev replacement which uses write. Unfortunately,
O_TMPFILE is only available on kernels >= 3.11. When O_TMPFILE is
unavailable, an open-coded mkostemp is used.
https://bugzilla.gnome.org/show_bug.cgi?id=722889
|
|
A compatibility libsystemd-login library is created which uses
.symver and ifunc magic proposed by Lennart to make programs linked
to the old library name continue to work seamlessly.
Unfortunately the bfd linker crashes:
https://sourceware.org/bugzilla/show_bug.cgi?id=16467
This will be fixed in binutils 2.25.
As a work-around, gold can be used:
LDFLAGS=-Wl,-fuse-ld=gold
Unfortunately the switch to pick the linker appeared in gcc 4.8.
This also doesn't work with LLVM:
http://llvm.org/bugs/show_bug.cgi?id=11897
|
|
Lennart pointed out that we were misspelling 'resolve'. Let's not repeat the mistakes of 'umount'
and 'resolv.conf'.
|
|
Also rename sd-dns -> sd-resolv.
|
|
Documentation was updated to refer to either 'libsystemd' or 'sd-bus' in place
of libsystemd-bus.
|
|
Origin: <http://0pointer.de/lennart/projects/libasyncns/>
[tomegun: renamed some more files asyncns -> sd-dns and moved to libsystemd-bus as
requested by Lennart]
|
|
It is nicer to predefine patterns using configure time check instead of
using casts everywhere.
Since we do not need to use any flags, include "%" in the format instead
of excluding it like PRI* macros.
|
|
compat parser
|
|
systemd-bus-driverd is a small daemon that connects to kdbus and
implements the org.freedesktop.DBus interface. IOW, it provides the bus
functions traditionally taken care for by dbus-daemon.
Calls are proxied to kdbus, either via libsystemd-bus (were applicable)
or with the open-coded use of ioctl().
Note that the implementation is not yet finished as the functions to
add and remove matches and to start services by name are still missing.
|
