summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-06-26sd-dhcp6-lease: Add helper function to compute remaining expiry timePatrik Flykt
Create a helper function to compute the remaining time in seconds from time T2 to the IPv6 address with the longest lifetime. The computed time is used as the Maximum Retransmission Duration in Rebinding state. See RFC 3315, section 18.1.4. for details.
2014-06-26sd-dhcp6-client: Add Option Request Option supportPatrik Flykt
Provide a function to request more options from the DHCPv6 server. Provide a sensible default set at startup and add test basic test cases for the intended usage. Define DNS and NTP related option codes and add comments for the unassigned codes.
2014-06-26networkd: Properly stop router solicitation and DHCPv6 clientPatrik Flykt
When a link fails or looses carrier, always stop ongoing router solicitation and any DHCPv6 client that may be running.
2014-06-26sd-icmp6-nd: Add function to stop ongoing ICMPv6 discoveryPatrik Flykt
In some use cases stopping an ongoing ICMPv6 discovery is more useful than always unreferencing the whole structure.
2014-06-26sd-dhcp6-client: return NULL from _unref() like the other sd-* librariesPatrik Flykt
In order to keep the refcounting working, a DONT_DESTROY macro similar to the one in sd-bus has been added also to DHCPv6.
2014-06-26timer: name the stamp file consistentlyMichał Bartoszkiewicz
The stamp file for systemd --user timers was named stamp-foo.timer if XDG_DATA_HOME was unset, but foo.timer otherwise.
2014-06-26coredumpctl: fix HAVE_XZ checkDaniel Mack
2014-06-26coredumpctl: fix build with !HAVE_XZDaniel Mack
Fixes the following build error: CCLD coredumpctl src/journal/coredumpctl.o: In function `save_core': /src/systemd-master/src/journal/coredumpctl.c:656: undefined reference to `decompress_stream' collect2: error: ld returned 1 exit status make[2]: *** [coredumpctl] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2
2014-06-26core/transaction: fix cycle break attempts outside transactionUoti Urpala
Patch fixes some incorrect-looking code in transaction.c. It could fix cases where Debian users with bad package configurations had systemd go into an infinite loop printing messages about breaking an ordering cycle, though I have not reproduced that problem myself. transaction_verify_order_one() considers jobs/units outside current transaction when checking whether ordering dependencies cause cycles. It would also incorrectly try to break cycles at these jobs; this cannot work, as the break action is to remove the job from the transaction, which is a no-op if the job isn't part of the transaction to begin with. The unit_matters_to_anchor() test also looks like it would not work correctly for non-transaction jobs. Add a check to verify that the unit is part of the transaction before considering a job a candidate for deletion. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=752259
2014-06-26build-sys: include PolicyKit files as part of distributionFilipe Brandenburger
So that building from an archive works even if intltool is not present. The README file already mentioned that intltool should only be required when building from git. Tested: Built it from the distribution archive on a host without intltool. $ ./configure --enable-polkit $ make
2014-06-26build-sys: disable NLS support if intltool is not foundFilipe Brandenburger
IT_PROG_INTLTOOL makes configure fail if intltool is not present. If we can not find intltool, then disable NLS (otherwise make in po/ fails since MSGFMT will not be defined.) Tested: Built it on a host without intltool. $ ./configure --enable-nls ... checking for intltool-merge... no configure: error: --enable-nls requested but intltool not found $ ./configure --disable-polkit ... checking for intltool-merge... no configure: WARNING: *** Disabling NLS support because intltool was not found checking whether NLS is requested... no ... $ make https://bugs.freedesktop.org/show_bug.cgi?id=79692
2014-06-26build-sys: add explicit support for --disable-nlsFilipe Brandenburger
In particular, disable intltool when --disable-nls is passed to configure. Tested: Built it on a host without intltool or gettext. $ ./configure --disable-nls --disable-polkit $ make
2014-06-26core: Don't require cgroups xattr supportTom Hirst
Failure to mount cgroups with xattr should not be fatal
2014-06-26install: enable timesyncd by defaultMichael Olbrich
This treats it similarly to networkd, resolved and others and it matches what 90-systemd.preset does.
2014-06-26core: use correct format string for UIDsMichał Bartoszkiewicz
2014-06-26man: add coredump.conf(5)Zbigniew Jędrzejewski-Szmek
2014-06-26coredump+coredumpctl: add COREDUMP_FILENAME, use in coredumpctlZbigniew Jędrzejewski-Szmek
2014-06-26coredump: make compression configurableZbigniew Jędrzejewski-Szmek
Add Compression={none,xz} and CompressionLevel=0-9 settings. Defaults are xz/6. Compression=filesystem may be added later. I picked "xz" for the compression "type", since we might want to add different compressors later on. XZ is fairly memory and CPU intensive, and embedded users will likely want to use LZO or some other lightweight compression mechanism.
2014-06-26coredump: compress core filesZbigniew Jędrzejewski-Szmek
Unfortunately the core is first written uncompressed, then compressed by reading from disk and writing to the output file. This is ugly and slow, but I don't see a way around, if we want to get the backtrace without keeping everything in memory.
2014-06-26journal/compress: add stream compression/decompression functionsZbigniew Jędrzejewski-Szmek
2014-06-26journal/compress: simplify compress_blobZbigniew Jędrzejewski-Szmek
2014-06-26shutdown: rework messages during shutdownZbigniew Jędrzejewski-Szmek
When running in 'quiet' mode, the only message printed from shutdown binary would be 'Cannot finalize remaining file systems and devices, giving up.', the only log line at error level before switch back to initramfs. This is misleading, because in initramfs everything will be cleaned up properly. Avoid printing anything at error level before the attempt to switch back to initramfs. Rework the messages to contain a bit more information what is still remaining, to help people diagnose shutdown issues.
2014-06-26sysv-generator: fix incorect ordering of WantsThomas Hindoe Paaboel Andersen
2014-06-25systemctl: add new "is-system-running" command to check whether system is ↵Lennart Poettering
fully up https://bugs.freedesktop.org/show_bug.cgi?id=66926
2014-06-25update TODOLennart Poettering
2014-06-25fsck: consider a fsck implementation linked to /bin/true non-existantLennart Poettering
2014-06-25update TODOLennart Poettering
2014-06-25Trim TODOZbigniew Jędrzejewski-Szmek
2014-06-25tests: add test-compressRonny Chevalier
2014-06-24sysv-generator: rename PidFile to PIDFileThomas Hindoe Paaboel Andersen
Spotted by Alexey Shabalin
2014-06-24use more _cleanup_ macroRonny Chevalier
2014-06-24sd-dhcp6-client: use %m instead of strerror(errno)Ronny Chevalier
2014-06-24switch-root: create essential base directories at system bootupKay Sievers
This allows us to bootup a rootfs with a /usr directory only.
2014-06-24sd-dhcp-client: return NULL from _unref() like the other sd-* librariesTom Gundersen
Let's keep this behavior consistent across our libraries. In order to keep the refcounting working, a DONT_DESTROY macro similar to the one in sd-bus was introduced.
2014-06-24nspawn: create essential base directories at system bootupKay Sievers
This allows us to bootup a rootfs with a /usr directory only.
2014-06-23Revert "Add systemd-coredumpctl as an alias for coredumpctl"Zbigniew Jędrzejewski-Szmek
This reverts the documentation part of commit dfdd0e0730385eef08f019863fd41168b05b6ab0.
2014-06-23coredump: log coredump even if core dumping failsZbigniew Jędrzejewski-Szmek
Journal might be functional even if we cannot write to /var/lib/systemd/coredump.
2014-06-23coredump: retrieve comm information from /procZbigniew Jędrzejewski-Szmek
Kernel mangles comm information in an irreversible way when comm constains repeated spaces. Retrieve comm information from /proc, and only fallback to the information provided on the commandline when retrieving information from /proc fails. Add exe information to the list of saved xattr. https://bugs.freedesktop.org/show_bug.cgi?id=62043
2014-06-23fstab-generator: simplify add_root_mountZbigniew Jędrzejewski-Szmek
2014-06-23man: fix path in crypttab(5)Zbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=75816
2014-06-24build-sys: do not run coverage if build failedRonny Chevalier
2014-06-24tests: add test-ratelimitRonny Chevalier
2014-06-24tests: add tests to test-unit-nameRonny Chevalier
add tests for: - unit_instance_is_valid - unit_prefix_is_valid - unit_name_change_suffix - unit_name_build - unit_name_is_instance - build_subslice - unit_name_to_instance - unit_name_escape
2014-06-23cryptsetup: don't add unit dependency on /dev/null devices when it is listed ↵Lennart Poettering
as password file As special magic, don't create device dependencies for /dev/null. Of course, there might be similar devices we might want to include, but given that none of them really make sense to specify as password source there's really no point in checking for anything else here. https://bugs.freedesktop.org/show_bug.cgi?id=75816
2014-06-23core: You can not put the cached result of use_smack fct, as we are not sure ↵Ronan Le Martret
the "/sys" is mounted. So we should mount "sys" before "/proc" https://bugs.freedesktop.org/show_bug.cgi?id=77646
2014-06-23core: make sure Environment fields passed in for transient units are ↵Hristo Venev
properly written to unit files https://bugs.freedesktop.org/show_bug.cgi?id=76744
2014-06-23vconsole: also copy character maps (not just fonts) from vt1 to vt2, vt3, ...Carl Schaefer
https://bugs.freedesktop.org/show_bug.cgi?id=78796
2014-06-23coredump: never write more than the configured processing size limit to diskLennart Poettering
2014-06-23coredumpctl: show comm name next to PIDLennart Poettering
2014-06-23coredump: quit early if we cannot store ay coredump to diskLennart Poettering
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-12-26 06:25:06 +0000