| Age | Commit message (Collapse) | Author |
|---|
|
Also return the first error, since it's most likely to be interesting.
If unlink fails, symlink will usually return EEXIST.
|
|
Inspired from the new logic in nss-systemd let's make sure we don't end up
deadlocking in nss-mymachines either in case dbus-daemon tries to a look up a
name and we want to connect to the bus.
This case is much simpler though, as there's no point in resolving virtual
machine UIDs by dbus-daemon as those should never be able to connect to the
host's busses.
|
|
dbus-daemon does NSS name look-ups in order to enforce its bus policy. This
might dead-lock if an NSS module use wants to use D-Bus for the look-up itself,
like our nss-systemd does. Let's work around this by bypassing bus
communication in the NSS module if we run inside of dbus-daemon. To make this
work we keep a bit of extra state in /run/systemd/dynamic-uid/ so that we don't
have to consult the bus, but can still resolve the names.
Note that the normal codepath continues to be via the bus, so that resolving
works from all mount namespaces and is subject to authentication, as before.
This is a bit dirty, but not too dirty, as dbus daemon is kinda special anyway
for PID 1.
|
|
|
|
This adds the boolean RemoveIPC= setting to service, socket, mount and swap
units (i.e. all unit types that may invoke processes). if turned on, and the
unit's user/group is not root, all IPC objects of the user/group are removed
when the service is shut down. The life-cycle of the IPC objects is hence bound
to the unit life-cycle.
This is particularly relevant for units with dynamic users, as it is essential
that no objects owned by the dynamic users survive the service exiting. In
fact, this patch adds code to imply RemoveIPC= if DynamicUser= is set.
In order to communicate the UID/GID of an executed process back to PID 1 this
adds a new "user lookup" socket pair, that is inherited into the forked
processes, and closed before the exec(). This is needed since we cannot do NSS
from PID 1 due to deadlock risks, However need to know the used UID/GID in
order to clean up IPC owned by it if the unit shuts down.
|
|
This makes it easier to discern the relevant and obsolete parts of the vtables,
and in particular helps when comparing introspection data with the actual
vtable definitions.
|
|
|
|
|
|
|
|
|
|
Make journalctl more flexible
|
|
Currently in the journal you get messages without context like:
systemd-sysv-generator[$pid]: Failed to build name: Invalid argument
When parsing the init script, show the file and line number where the
error was found. At the same time, add more context information if
available.
Thus turning the message into something like:
systemd-sysv-generator[$pid]: [/etc/init.d/root-system-proofd:13] Could not build name for facility $network,: Invalid argument
|
|
If journals get into a closed state like when rotate fails due to
ENOSPC, when space is made available it currently goes unnoticed leaving
the journals in a closed state indefinitely.
By calling system_journal_open() on entry to find_journal() we ensure
the journal has been opened/created if possible.
Also moved system_journal_open() up to after open_journal(), before
find_journal().
Fixes https://github.com/systemd/systemd/issues/3968
|
|
$ ls -l /dev/disk/by-id/nvme*
lrwxrwxrwx. 1 root root 13 Aug 17 04:25 /dev/disk/by-id/nvme-HUSPR3216AHP301_STM0001B6780 -> ../../nvme0n1
lrwxrwxrwx. 1 root root 15 Aug 17 04:25 /dev/disk/by-id/nvme-HUSPR3216AHP301_STM0001B6780-part1 -> ../../nvme0n1p1
https://github.com/systemd/systemd/issues/1453
https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=779ff75617099f4defe14e20443b95019a4c5ae8
|
|
build-sys: clarify that --disable-efi is about sd-boot and bootctl
|
|
This will now also handle `journalctl --directory=/var/log/journal`
properly.
|
|
After `journalctl -D /var/log/journal` "--directory", "--file",
"--machine" and "--root" should not be available for completion, because
they are exclusive. But multiple `--file` arguments are allowed.
|
|
core: add cgroup CPU controller support on the unified hierarchy
(zj: merging not squashing to make it clear against which upstream this patch was developed.)
|
|
If wasn't obvious what the effect of --disable-efi was without
going through Makefile.am.
Fixes #3959.
|
|
Random numbers are provided by the host kernel, we don't need to do anything.
https://bugzilla.redhat.com/show_bug.cgi?id=1329124
|
|
|
|
In 68c4f6d the following was added:
local -a _modes; _modes=("--user" "--system")
local _sys_service_mgr=${${words:*_modes}[(R)(${(j.|.)_modes})]:---system}
With the following comment:
> If neither are on the line, --system is set; for system services to be
> completed.
But it does not work as documented:
% _modes=(--user --system)
% words=()
% echo ${${words:*_modes}[(R)(${(j.|.)_modes})]:---system}
However, it should not use `--system` in that case anyway, so this patch
removes the part that should cause a default to be used and adds some
comments.
|
|
This only completes fields from `journalctl --user` in _journal_fields when `--user`
is used.
It also changes $_sys_service_mgr to include both `--system` and `--user`,
because `journalctl` behaves different from `systemctl` in this regard.
No attempt is made to filter out invalid combinations, e.g. when using both
`--directory` and `--system` (see https://github.com/systemd/systemd/issues/3949).
|
|
It is useful to look at a (possibly inactive) container or other os tree
with --root=/path/to/container. This is similar to specifying
--directory=/path/to/container/var/log/journal --directory=/path/to/container/run/systemd/journal
(if using --directory multiple times was allowed), but doesn't require
as much typing.
|
|
The directory argument that is given to sd_j_o_d was ignored when
SD_JOURNAL_OS_ROOT was given, and directories relative to the root of the host
file system were used. With that flag, sd_j_o_d should do the same as
sd_j_open_container: use the path as "prefix", i.e. the directory relative to
which everything happens.
Instead of touching sd_j_o_d, journal_new is fixed to do what sd_j_o_c
was doing, and treat the specified path as prefix when SD_JOURNAL_OS_ROOT is
specified.
|
|
There is no reason not to. This makes journalctl -D ... --system work,
useful for example when viewing files from a deactivated container.
|
|
… in preparation for future changes.
|
|
zsh completion: handle --user mode when filtering by state and in journalctl commands
|
|
This uses the same mechanism from _systemctl to inject `--user` into the
`journalctrl -F _EXE` call to list executables.
Before this patch the "commands" section would list executables from
system units always.
|
|
Use `$_sys_service_mgr` to handle `--user`, so that `systemctl --user
stop` will correctly filter the active (user) units. Before this patch,
only user units that also exist as system units and are stoppable there
would be listed.
|
|
|
|
The kernel treats values below a certain threshold (minfmt->min_coredump
which is initialized do ELF_EXEC_PAGESIZE, which varies between architectures,
but is usually the same as PAGE_SIZE) as disabling coredumps [1].
Any core image below ELF_EXEC_PAGESIZE will yield an invalid backtrace anyway [2],
so follow the kernel and not try to parse or store such images.
[1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/fs/coredump.c#n660
[2] systemd-coredump[16260]: Process 16258 (sleep) of user 1002 dumped core.
Stack trace of thread 16258:
#0 0x00007f1d8b3d3810 n/a (n/a)
https://bugzilla.redhat.com/show_bug.cgi?id=1309172#c19
|
|
Add hwdb parser to check for inconsistencies
|
|
Under NixOS, the config_path /etc/systemd/system is a symlink to
/etc/static/systemd/system. Commands such as `systemctl list-unit-files`
and `systemctl is-enabled` did not work as the symlink was not followed.
This does not affect how symlinks are treated within the config_path
directory.
|
|
the /) (#3934)
Fixes #3927.
|
|
|
|
|
|
It's hard to say which one of the two mappings should stay. But the later
one would win (when both very present), and nobody complained, so let's
assume that that's the one.
|
|
It seems awkward to have both cases mixes. Note that the real parser
accepts both cases, and this only standarizes the usage in the systemd
database.
|
|
Quoting https://github.com/systemd/systemd/pull/3906#discussion_r73828368:
> According to
> http://support.logitech.com/en_us/product/v220-cordless-optical-mouse-for-notebooks
> it seems the mouse is using a pre-version of the small unifying receiver we
> know now. If there are 2 mice with the same receiver, that means that the
> values should both be dropped IMO.
|
|
This works for hwdb/[67]0-*.hwdb. I also added code to parse hwdb/20-*, but those
files are huge, and parsing them using this parser is annoyingly slow (about one
minute for the biggest files). So I removed the support for hwdb/20-*, a much simpler
hand-generated parser should suffice for those.
Current output:
hwdb/60-evdev.hwdb: 24 match groups, 35 matches, 88 properties, 0.19323015213012695s to parse
Match 'evdev:input:b0003v05ACp0259*' is duplicated
Match 'evdev:input:b0003v05ACp025A*' is duplicated
Match 'evdev:input:b0003v05ACp025B*' is duplicated
hwdb/60-keyboard.hwdb: 122 match groups, 188 matches, 638 properties, 1.0906572341918945s to parse
Failed to parse: 'KEYBOARD_KEY_8F=switchvideomode'
Failed to parse: 'KEYBOARD_KEY_C0183=media'
Failed to parse: 'KEYBOARD_KEY_C0201=new'
Failed to parse: 'KEYBOARD_KEY_C0289=reply'
Failed to parse: 'KEYBOARD_KEY_C028B=forwardmail'
Failed to parse: 'KEYBOARD_KEY_C028C=send'
Failed to parse: 'KEYBOARD_KEY_C021A=undo'
Failed to parse: 'KEYBOARD_KEY_C0279=redo'
Failed to parse: 'KEYBOARD_KEY_C0208=print'
Failed to parse: 'KEYBOARD_KEY_C0207=save'
Failed to parse: 'KEYBOARD_KEY_C0194=file'
Failed to parse: 'KEYBOARD_KEY_C01A7=documents'
Failed to parse: 'KEYBOARD_KEY_C01B6=images'
Failed to parse: 'KEYBOARD_KEY_C01B7=sound'
Property KEYBOARD_KEY_c7 is duplicated
Failed to parse: 'KEYBOARD_KEY_cF=end'
hwdb/70-mouse.hwdb: 62 match groups, 93 matches, 68 properties, 0.34186625480651855s to parse
Match 'mouse:usb:v046dpc51b:name:Logitech USB Receiver:' is duplicated
hwdb/70-pointingstick.hwdb: 5 match groups, 14 matches, 7 properties, 0.06518816947937012s to parse
hwdb/70-touchpad.hwdb: 3 match groups, 5 matches, 3 properties, 0.039690494537353516s to parse
Subsequest commits will clean those issues up.
|
|
This way it's clear that the property block does not end at the comment.
The python checker will complain if this is not the case.
We had a few bugs before where two match blocks were merged by mistake,
and this change should help avoid that.
|
|
|
|
|
|
Copy-paste error, correct IDs from the kernel's drivers/input/mouse/bcm5974.c
Fixes: https://github.com/systemd/systemd/pull/3906/
|
|
|
|
|
|
Unfortunately, due to the disagreements in the kernel development community,
CPU controller cgroup v2 support has not been merged and enabling it requires
applying two small out-of-tree kernel patches. The situation is explained in
the following documentation.
https://git.kernel.org/cgit/linux/kernel/git/tj/cgroup.git/tree/Documentation/cgroup-v2-cpu.txt?h=cgroup-v2-cpu
While it isn't clear what will happen with CPU controller cgroup v2 support,
there are critical features which are possible only on cgroup v2 such as
buffered write control making cgroup v2 essential for a lot of workloads. This
commit implements systemd CPU controller support on the unified hierarchy so
that users who choose to deploy CPU controller cgroup v2 support can easily
take advantage of it.
On the unified hierarchy, "cpu.weight" knob replaces "cpu.shares" and "cpu.max"
replaces "cpu.cfs_period_us" and "cpu.cfs_quota_us". [Startup]CPUWeight config
options are added with the usual compat translation. CPU quota settings remain
unchanged and apply to both legacy and unified hierarchies.
v2: - Error in man page corrected.
- CPU config application in cgroup_context_apply() refactored.
- CPU accounting now works on unified hierarchy.
|
|
since link_dirty itself calls manager_dirty no need to
call it separately .
|
|
Fix man links
|
