| Age | Commit message (Collapse) | Author |
|---|
|
SYSTEMD_UNIT_PATH=foobar: systemd-analyze verify barbar/unit.service
will load units from barbar/, foobar/, /etc/systemd/system/, etc.
SYSTEMD_UNIT_PATH= systemd-analyze verify barbar/unit.service
will load units only from barbar/, which is useful e.g. when testing
systemd's own units on a system with an older version of systemd installed.
|
|
[Unit]
Before=foobar.device
[Service]
ExecStart=/bin/true
Type=oneshot
$ systemd-analyze verify before-device.service
before-device.service: Dependency Before=foobar.device ignored (.device units cannot be delayed)
|
|
Fixes #3830
|
|
|
|
nss-resolve: return NOTFOUND instead of UNAVAIL for DNSSEC validation failures
|
|
It needs to be possible to tell apart "the nss-resolve module does not exist"
(which can happen when running foreign-architecture programs) from "the queried
DNS name failed DNSSEC validation" or other errors. So return NOTFOUND for these
cases too, and only keep UNAVAIL for the cases where we cannot handle the given
address family.
This makes it possible to configure a fallback to "dns" without breaking
DNSSEC, with "resolve [!UNAVAIL=return] dns". Add this to the manpage.
This does not change behaviour if resolved is not running, as that already
falls back to the "dns" glibc module.
Fixes #4157
|
|
resolve includes myhostname functionality, so there is no need to add it again.
|
|
Handle general errors from the resolved call in _nss_resolve_gethostbyaddr2_r()
the same say as in the other variants: Just "goto fail" as that does exactly
the same.
|
|
"closing all" might suggest that _all_ fds received with the notification message
will be closed. Reword the message to clarify that only the "unused" ones will be
closed.
|
|
No functional change.
|
|
|
|
coredump: remove Storage=both support, various fixes for sd-coredump and coredumpctl
|
|
DNS servers which have route-only domains should only be used for
the specified domains. Routing queries about other domains there is a privacy
violation, prone to fail (as that DNS server was not meant to be used for other
domains), and puts unnecessary load onto that server.
Introduce a new helper function dns_server_limited_domains() that checks if the
DNS server should only be used for some selected domains, i. e. has some
route-only domains without "~.". Use that when determining whether to query it
in the scope, and when writing resolv.conf.
Extend the test_route_only_dns() case to ensure that the DNS server limited to
~company does not appear in resolv.conf. Add test_route_only_dns_all_domains()
to ensure that a server that also has ~. does appear in resolv.conf as global
name server. These reproduce #3420.
Add a new test_resolved_domain_restricted_dns() test case that verifies that
domain-limited DNS servers are only being used for those domains. This
reproduces #3421.
Clarify what a "routing domain" is in the manpage.
Fixes #3420
Fixes #3421
|
|
It's probably easier to diagnose a bad notification message if the
contents are printed. But still, do anything only if debugging is on.
|
|
This undoes 531ac2b234. I acked that patch without looking at the code
carefully enough. There are two problems:
- we want to process the fds anyway
- in principle empty notification messages are valid, and we should
process them as usual, including logging using log_unit_debug().
|
|
If manager_dispatch_notify_fd() fails and returns an error then the handling of
service notifications will be disabled entirely leading to a compromised system.
For example pid1 won't be able to receive the WATCHDOG messages anymore and
will kill all services supposed to send such messages.
|
|
Fixes #4234.
Signed-off-by: Jorge Niedbalski <jnr@metaklass.org>
|
|
coredump had code to check if copy_bytes() hit the max_bytes limit,
and refuse further processing in that case.
But in 84ee0960443, the return convention for copy_bytes() was changed
from -EFBIG to 1 for the case when the limit is hit, so the condition
check in coredump couldn't ever trigger.
But it seems that *do* want to process such truncated cores [1].
So change the code to detect truncation properly, but instead of
returning an error, give a nice log entry.
[1] https://github.com/systemd/systemd/issues/3883#issuecomment-239106337
Should fix (or at least alleviate) #3883.
|
|
Another fix for #4161.
|
|
For the user, if the core file is missing or inaccessible, it is
more interesting that the fact that they forgot to pipe to a file.
So delay the failure from the check until after we have verified
that the file or the COREDUMP field are present.
Partially fixes #4161.
Also, error reporting on failure was duplicated. save_core() now
always prints an error message (because it knows the paths involved,
so can the most useful message), and the callers don't have to.
|
|
Propagate errors properly, so that if we hit oom or an error in the
journal, the whole command will fail. This is important when using
the output in scripts.
Support the output of multiple values for the same field with -F.
The journal supports that, and our official commands should too, as
far as it makes sense. -F can be used to print user-defined fields
(e.g. somebody could use a TAG field with multiple occurences), so
we should support that too. That seems better than silently printing
the last value found as was done before.
We would iterate trying to match the same field with all possible
field names. Once we find something, cut the loop short, since we
know that nothing else can match.
|
|
The column for "present" was easy to miss, especially if somebody had no
coredumps present at all, in which case the column of spaces of width one
wasn't visually distinguished from the neighbouring columns. Replace this
with an explicit text, one of: "missing", "journal", "present", "error".
$ coredumpctl
TIME PID UID GID SIG COREFILE EXE
Mon 2016-09-26 22:46:31 CEST 8623 0 0 11 missing /usr/bin/bash
Mon 2016-09-26 22:46:35 CEST 8639 1001 1001 11 missing /usr/bin/bash
Tue 2016-09-27 01:10:46 CEST 16110 1001 1001 11 journal /usr/bin/bash
Tue 2016-09-27 01:13:20 CEST 16290 1001 1001 11 journal /usr/bin/bash
Tue 2016-09-27 01:33:48 CEST 17867 1001 1001 11 present /usr/bin/bash
Tue 2016-09-27 01:37:55 CEST 18549 0 0 11 error /usr/bin/bash
Also, use access(…, R_OK), so that we can report a present but inaccessible
file different than a missing one.
|
|
In 'list', show present also for coredumps stored in the journal.
In 'status', replace "File" with "Storage" line that is always present.
Possible values:
Storage: none
Storage: journal
Storage: /path/to/file (inacessible)
Storage: /path/to/file
Previously the File field be only present if the file was accessible, so users
had to manually extract the file name precisely in the cases where it was
needed, i.e. when coredumpctl couldn't access the file. It's much more friendly
to always show something. This output is designed for human consumption, so
it's better to be a bit verbose.
The call to sd_j_set_data_threshold is moved, so that status is always printed
with the default of 64k, list uses 4k, and coredump retrieval is done with the
limit unset. This should make checking for the presence of the COREDUMP field
not too costly.
|
|
|
|
sd_journal_previous() returns 0 if it didn't do any move, so the
warning was stupidly always printed.
|
|
Added in 9fe13294a9 (by me :[```), and later obfuscated in d0c8806d4ab, if an
uncompressed external file or an internally stored coredump was supposed to be
written to a file descriptor, nothing would be written.
|
|
Back when external storage was initially added in 34c10968cb, this mode of
storage was added. This could have made some sense back when XZ compression was
used, and an uncompressed core on disk could be used as short-lived cache file
which does require costly decompression. But now fast LZ4 compression is used
(by default) both internally and externally, so we have duplicated storage,
using the same compression and same default maximum core size in both cases,
but with different expiration lifetimes. Even the uncompressed-external,
compressed-internal mode is not very useful: for small files, decompression
with LZ4 is fast enough not to matter, and for large files, decompression is
still relatively fast, but the disk-usage penalty is very big.
An additional problem with the two modes of storage is that it complicates
the code and makes it much harder to return a useful error message to the user
if we cannot find the core file, since if we cannot find the file we have to
check the internal storage first.
This patch drops "both" storage mode. Effectively this means that if somebody
configured coredump this way, they will get a warning about an unsupported
value for Storage, and the default of "external" will be used.
I'm pretty sure that this mode is very rarely used anyway.
|
|
|
|
When s->length is zero this function doesn't do anything, note that in a
comment.
|
|
core:sandbox: Add new ProtectKernelTunables=, ProtectControlGroups=, ProtectSystem=strict and fixes
|
|
Show and formatting fixes
|
|
Even if
```
cat /proc/sys/net/ipv6/conf/all/disable_ipv6
1
```
is disabled
cat /proc/net/sockstat6
```
TCP6: inuse 2
UDP6: inuse 1
UDPLITE6: inuse 0
RAW6: inuse 0
FRAG6: inuse 0 memory 0
```
Looking for /proc/net/if_inet6 is the right choice.
|
|
propagation
Better safe.
|
|
|
|
This test sometimes fails in semaphore, but not when run interactively,
so it's hard to debug.
|
|
This appends the nvme name and namespace identifier attribute the the
PCI path for by-path links. Symlinks like the following are now present:
lrwxrwxrwx. 1 root root 13 Sep 16 12:12 pci-0000:01:00.0-nvme-1 -> ../../nvme0n1
lrwxrwxrwx. 1 root root 15 Sep 16 12:12 pci-0000:01:00.0-nvme-1-part1 -> ../../nvme0n1p1
Cc: Michal Sekletar <sekletar.m@gmail.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
|
|
There was no certainty about how the path in service file should look
like for usb functionfs activation. Because of this it was treated
differently in different places, which made this feature unusable.
This patch fixes the path to be the *mount directory* of functionfs, not
ep0 file path and clarifies in the documentation that ListenUSBFunction should be
the location of functionfs mount point, not ep0 file itself.
|
|
It seems to me that the explicit positional argument should have higher
priority than "an option".
|
|
This patch fixes wrong calculation of burst_modulate(), which now calculates
the values smaller than really expected ones if available disk space is
strictly more than 1MB.
In particular, if available disk space is strictly more than 1MB and strictly
less than 16MB, the resulted value becomes smaller than its original one.
>>> (math.log2(1*1024**2)-16) / 4
1.0
>>> (math.log2(16*1024**2)-16) / 4
2.0
>>> (math.log2(256*1024**2)-16) / 4
3.0
→ This matches the comment in the function.
|
|
If ulimit is smaller than page_size(), function save_external_coredump()
returns -EBADSLT and this causes skipping whole core dumping part in
submit_coredump(). Initializing coredump_size to UINT64_MAX prevents
evaluating a condition with uninitialized varialbe which leads to
calling allocate_journal_field() with coredump_fd = -1 which causes
aborting.
Signed-off-by: Matej Habrnal <mhabrnal@redhat.com>
|
|
|
|
|
|
is set
Instead of having a local syscall list, use the @raw-io group which
contains the same set of syscalls to filter.
|
|
As with previous patch simplify ProtectHome and don't care about
duplicates, they will be sorted by most restrictive mode and cleaned.
|
|
ProtectSystem= with all its different modes and other options like
PrivateDevices= + ProtectKernelTunables= + ProtectHome= are orthogonal,
however currently it's a bit hard to parse that from the implementation
view. Simplify it by giving each mode its own table with all paths and
references to other Protect options.
With this change some entries are duplicated, but we do not care since
duplicate mounts are first sorted by the most restrictive mode then
cleaned.
|
|
Make ALSA entries, latency interface, mtrr, apm/acpi, suspend interface,
filesystems configuration and IRQ tuning readonly.
Most of these interfaces now days should be in /sys but they are still
available through /proc, so just protect them. This patch does not touch
/proc/net/...
|
|
PrivateDevices=true
|
|
Documentation fixes for ReadWritePaths= and ProtectKernelTunables=
as reported by Evgeny Vereshchagin.
|
|
Move out mount calculation on its own function. Actually the logic is
smart enough to later drop nop and duplicates mounts, this change
improves code readability.
---
src/core/namespace.c | 47 ++++++++++++++++++++++++++++++++++++-----------
1 file changed, 36 insertions(+), 11 deletions(-)
|
|
Instead of having all these paths everywhere, put the ones that are
protected by ProtectKernelTunables= into their own table. This way it
is easy to add paths and track which ones are protected.
|
