| Age | Commit message (Collapse) | Author |
|---|
|
Similar to MemoryMax=, MemorySwapMax= limits swap usage. This controls
controls "memory.swap.max" attribute in unified cgroup.
|
|
The patch supports to configure
GenericReceiveOffload
LargeReceiveOffload
|
|
Resolves #3534
|
|
The patch supports to configure
GenericReceiveOffload
LargeReceiveOffload
|
|
This patch supports these features to be on or off
Generic Segmentation Offload
TCP Segmentation Offload
UDP Segmentation Offload
fixes #432
|
|
'continue' is a fancy no-op here – it only skips through the inner loop,
not the outer one, so entries already in BootOrder get printed twice.
This partially reverts f939cff71577 "bootctl: various coding style
updates".
|
|
add ForceUnmount= setting for mount units
|
|
importd: fix build failure with missing O_TMPFILE (branch yem/o-tmpfile)
|
|
man page fixes
|
|
Similar to MemoryMax=, MemorySwapMax= limits swap usage. This controls
controls "memory.swap.max" attribute in unified cgroup.
|
|
fileio makes use of O_TMPFILE when it is available.
We now always have O_TMPFILE, defined in missing.h if missing
from the toolchain headers.
Have fileio include missing.h and drop the guards around the
use of O_TMPFILE.
|
|
Currently, a missing __O_TMPFILE was only defined for i386 and x86_64,
leaving any other architectures with an "old" toolchain fail miserably
at build time:
src/import/export-raw.c: In function 'reflink_snapshot':
src/import/export-raw.c:271:26: error: 'O_TMPFILE' undeclared (first use in this function)
new_fd = open(d, O_TMPFILE|O_CLOEXEC|O_NOCTTY|O_RDWR, 0600);
^
__O_TMPFILE (and O_TMPFILE) are available since glibc 2.19. However, a
lot of existing toolchains are still using glibc-2.18, and some even
before that, and it is not really possible to update those toolchains.
Instead of defining it only for i386 and x86_64, define __O_TMPFILE
with the specific values for those archs where it is different from the
generic value. Use the values as found in the Linux kernel (v4.8-rc3,
current as of time of commit).
---
Note: tested on ARM (build+run), with glibc-2.18 and linux headers 3.12.
Untested on other archs, though (I have no board to test this).
Changes v1 -> v2:
- add a comment specifying some are hexa, others are octal.
|
|
O_TMPFILE may be missing from the system headers, so use our fallback
definition.
---
Changes v1 -> v2:
- move include with local includes
|
|
Applying ulink tags to example addresses adds meaningless references in NOTES section of the man page.
|
|
|
|
hwdb: add axis range corrections for Lenovo Ideapad 500S-13ISK
|
|
|
|
"-f" switch
|
|
|
|
Resolves #3534
|
|
"-l" switch (#3827)
|
|
Minor cleanup suggested by Lennart.
|
|
Fixes:
$ sudo make run QEMU_BIN=/usr/bin/qemu-system-x86_64 KERNEL_APPEND=systemd.unit=multi-user.target SKIP_INITRD=yes
TEST RUN: Basic systemd setup
+ /usr/bin/qemu-system-x86_64 -smp 1 -net none -m 512M -nographic -kernel /boot/vmlinuz-4.6.7-200.fc23.x86_64 -drive format=raw,cache=unsafe,file=/var/tmp/systemd-test.izx99J/rootdisk.img -append 'root=/dev/sda1 raid=noautodetect loglevel=2 init=/usr/lib/systemd/systemd-under-valgrind rw console=ttyS0 selinux=0 systemd.unified_cgroup_hierarchy=no systemd.unit=multi-user.target '
valgrind: warning (non-fatal): readlink("/proc/self/exe") failed.
valgrind: continuing, however --trace-children=yes will not work.
--1:0: aspacem Valgrind: FATAL: can't open /proc/self/maps
--1:0: aspacem Exiting now.
[ 3.152367] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
[ 3.152367]
[ 3.152367] CPU: 0 PID: 1 Comm: memcheck-amd64- Not tainted 4.6.7-200.fc23.x86_64 #1
[ 3.152367] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.8.2-20150714_191134- 04/01/2014
[ 3.152367] 0000000000000086 0000000047ca1666 ffff88001ea43e00 ffffffff813d954e
[ 3.152367] ffffffff81a205a0 ffff88001ea43e98 ffff88001ea43e88 ffffffff811b5557
[ 3.152367] ffffffff00000010 ffff88001ea43e98 ffff88001ea43e30 0000000047ca1666
[ 3.152367] Call Trace:
[ 3.152367] [<ffffffff813d954e>] dump_stack+0x63/0x85
[ 3.152367] [<ffffffff811b5557>] panic+0xde/0x220
[ 3.152367] [<ffffffff810ab9c3>] do_exit+0xb43/0xb50
[ 3.152367] [<ffffffff810aba57>] do_group_exit+0x47/0xb0
[ 3.152367] [<ffffffff810abad4>] SyS_exit_group+0x14/0x20
[ 3.152367] [<ffffffff817dae72>] entry_SYSCALL_64_fastpath+0x1a/0xa4
[ 3.152367] Kernel Offset: disabled
[ 3.152367] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
[ 3.152367]
QEMU: Terminated
|
|
permit bus clients to pin units to avoid automatic GC
|
|
This commit follows further on the deprecation path for --share-system,
by splitting and gating each share-able namespace behind its own
environment flag.
|
|
Mere presence of the socket in the filesystem makes
udev_queue_get_udev_is_active() return that udev is running. Note that,
udev on exit doesn't unlink control socket nor does systemd. Thus socket
stays around even when both daemon and socket are stopped. This causes
problems for cryptsetup because when it detects running udev it launches
synchronous operations that *really* require udev. This in turn may
cause blocking and subsequent timeout in systemd-cryptsetup on reboot
while machine is in a state that udev and its control socket units are
stopped, e.g. emergency mode.
Fixes #2477
|
|
When the system journal becomes re-opened post-flush with the runtime
journal open, it implies we've recovered from something like an ENOSPC
situation where the system journal rotate had failed, leaving the system
journal closed, causing the runtime journal to be opened post-flush.
For the duration of the unavailable system journal, we log to the
runtime journal. But when the system journal gets opened (space made
available, for example), we need to close the runtime journal before new
journal writes will go to the system journal. Calling
server_flush_to_var() after opening the system journal with a runtime
journal present, post-flush, achieves this while preserving the runtime
journal's contents in the system journal.
The combination of the present flushed flag file and the runtime journal
being open is a state where we should be logging to the system journal,
so it's appropriate to resume doing so once we've successfully opened
the system journal.
|
|
|
|
|
|
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1357990
|
|
|
|
functions (#4019)
Prevents discard-qualifiers warnings when the passed variable was const
|
|
Fixes #3882
|
|
bus_connect_transport() is exclusively used from our command line tools, hence
let's set exit-on-disconnect for all of them, making behaviour a bit nicer in
case dbus-daemon goes down.
|
|
Old libdbus has a feature that the process is terminated whenever the the bus
connection receives a disconnect. This is pretty useful on desktop apps (where
a disconnect indicates session termination), as well as on command line apps
(where we really shouldn't stay hanging in most cases if dbus daemon goes
down).
Add a similar feature to sd-bus, but make it opt-in rather than opt-out, like
it is on libdbus. Also, if the bus is attached to an event loop just exit the
event loop rather than the the whole process.
|
|
|
|
This tests in particular that disconnecting results in the tracking object's
handlers to be called.
|
|
objects immediately
If the server side kicks us from the bus, from our view no names are on the bus
anymore, hence let's make sure to dispatch all tracking objects immediately.
|
|
In order to add a name to a bus tracking object we need to do some bus
operations: we need to check if the name already exists and add match for it.
Both are synchronous bus calls. While processing those we need to make sure
that the tracking object is not dispatched yet, as it might still be empty, but
is not going to be empty for very long.
hence, block dispatching by removing the object from the dispatch queue while
adding it, and readding it on error.
|
|
When a bus connection is closed we dispatch all reply callbacks. Do so in a new
function if its own.
No behaviour changes.
|
|
|
|
Also, make major improvements to the an page in general.
|
|
|
|
It is useful for clients to be able to read the last CPU usage counter value of
a unit even if the unit is already terminated. Hence, before destroying a
cgroup's cgroup cache the last CPU usage counter and return it if the cgroup is
gone.
|
|
Make sure we return proper errors for types not understood yet.
|
|
Instead of ignoring empty strings retrieved via the bus, treat them as NULL, as
it's customary in systemd.
|
|
Let's make sure we can read the exit code/status properties exposed by PID 1
properly. Let's reuse the existing code for unsigned fields, as we just use it
to copy words around, and don't calculate it.
|
|
This adds two (privileged) bus calls Ref() and Unref() to the Unit interface.
The two calls may be used by clients to pin a unit into memory, so that various
runtime properties aren't flushed out by the automatic GC. This is necessary
to permit clients to race-freely acquire runtime results (such as process exit
status/code or accumulated CPU time) on successful service termination.
Ref() and Unref() are fully recursive, hence act like the usual reference
counting concept in C. Taking a reference is a privileged operation, as this
allows pinning units into memory which consumes resources.
Transient units may also gain a reference at the time of creation, via the new
AddRef property (that is only defined for transient units at the time of
creation).
|
|
And while ware at it, also drop some references to kdbus, and stop claiming
sd-bus wasn't stable yet. Also order man page references in the main sd-bus man
page alphabetically.
|
