| Age | Commit message (Collapse) | Author |
|---|
|
Fix out-of-tree builds and distcheck
|
|
|
|
import/pull: fix for the name/reference overwrite
|
|
When pulling by image digest the identifiers that
were produced by parsing image digest were later
overwritten by code parsing image tag.
This resulted in invalid identifiers being used
when contacting the remote endpoint, resulting in 404.
Reported here:
http://lists.freedesktop.org/archives/systemd-devel/2015-June/033039.html
|
|
The test-barrier binary uses real-time alarms and timeouts to test for
races in the thread-barrier implementation. Hence, if your system is under
high load and your scheduler decides to not run test-barrier for
>BASE_TIME, then the tests are likely to fail.
Two options:
1) Increase BASE_TIME. This will make the test take significantly longer
for no real good. Furthermore, it is still not guaranteed that the
task is scheduled.
2) Don't rely on real-time timers, but use explicit synchronization. This
would basically test one barrier implementation with another.. kinda
ironic.. but maybe something worth looking into.
3) Disable test-barrier by default.
This patch chooses option 3) and makes sure test-barrier only runs if you
pass any argument.
Side note:
test-barrier is written in a way that if it fails under load, but
does not on idle systems, then it is very _unlikely_ that the
barrier implementation is the culprit. Hence, it makes little
sense to run it under load, anyway. It will not improve the test
coverage of barrier.c, but rather the coverage of the test itself.
|
|
exit-status: add missing include for SIG* defines
|
|
It depends on man/custom-entities.ent which is (and needs to be) a built file,
so we need to always build man/systemd.directives.xml as well.
We also need to drop this from update-man-list so that it doesn't get disted
from Makefile-man.am.
Fixes distcheck failure.
https://github.com/systemd/systemd/issues/215
|
|
Otherwise building fails with glibc 2.16. It works with glibc >= 2.17
because it is implicitly included via macro.h -> sys/param.h -> signal.h
|
|
When calling the build commands from another directory than the toplevel:
mkdir build
cd build
../configure [...]
... the compilation fails with the following error:
GEN man/systemd.directives.xml
Traceback (most recent call last):
File "../tools/make-directive-index.py", line 313, in make_page
_extract_directives(directive_groups, formatting, page)
File "../tools/make-directive-index.py", line 191, in _extract_directives
t = xml_parse(page)
File "/home/martin/upstream/systemd/tools/xml_helper.py", line 30, in xml_parse
doc = tree.parse(page, _parser)
File "lxml.etree.pyx", line 3301, in lxml.etree.parse (src/lxml/lxml.etree.c:72453)
File "parser.pxi", line 1791, in lxml.etree._parseDocument (src/lxml/lxml.etree.c:105915)
File "parser.pxi", line 1817, in lxml.etree._parseDocumentFromURL (src/lxml/lxml.etree.c:106214)
File "parser.pxi", line 1721, in lxml.etree._parseDocFromFile (src/lxml/lxml.etree.c:105213)
File "parser.pxi", line 1122, in lxml.etree._BaseParser._parseDocFromFile (src/lxml/lxml.etree.c:100163)
File "parser.pxi", line 580, in lxml.etree._ParserContext._handleParseResultDoc (src/lxml/lxml.etree.c:94286)
File "parser.pxi", line 690, in lxml.etree._handleParseResult (src/lxml/lxml.etree.c:95722)
File "parser.pxi", line 618, in lxml.etree._raiseParseError (src/lxml/lxml.etree.c:94754)
OSError: Error reading file 'man/bootup.xml': failed to load external entity "man/bootup.xml"
That is because the file names in the XML_FILES array are not relative
to $(top_srcdir), and hence ../tools/make-directive-index.py is called
with non-existant arguments.
To fix this, call patsubst when generating SOURCE_XML_FILES from
NON_INDEX_XML_FILES.
|
|
man: libudev - add description to udev_device_*
|
|
nspawn: when exiting, flush all remaining bytes from the pty to stdout
|
|
|
|
bus-proxy: add new dbus policy search paths from /usr
|
|
|
|
journal: make sure the clock increases strict monotonic
|
|
|
|
|
|
|
|
|
|
udevd: remove dead code
|
|
Let's work around crappy clocks in test-journal-interleaving.c too. This
does the same as 98d2a5341788b49e82d628dfdc2e241af6d70dcd but for
test-journal-interlaving.c rather than test-journal-stream.c.
|
|
acl-util: various smaller fixes to parse_acl()
|
|
|
|
journal: ensure test-journal-stream doesn't get confused by crappy cl…
|
|
D-Bus upstream is working on extending the configuration/policy search
path, follow this.
See #274 for details.
|
|
libudev: device - fix typo in udev_device_get_sysattr_list_entry()
|
|
- Make string parameter const
- Don't log some OOM errors, but not others
- Don't eat up errors generated by acl_from_text()
- Make sure check for success of every single strv_push() call
|
|
We were adding the attributes to the wrong list.
|
|
zsh-completion: _loginctl - general bug fixes
|
|
This is a simpler fix for #210, it simply uses copy_bytes() for the
copying.
|
|
Replace FOREACH_WORD_QUOTED with a loop using unquote_first_word in config_parse_exec()
|
|
This ensures that we write strictly monotonic timestamps into the
journal files, to ensure that we can properly interleave everything
correctly.
See #175 for details.
|
|
Leftover from 6af5e6a4c918a68b196a04346732e094e5373a36
|
|
|
|
This is consistent with how an empty string works in an ExecStart=
statement. We should not differentiate between an empty string and
whitespace only (since they look the same.)
Update the test case with whitespace only to reflect that the list is
reset.
Tested that `test-unit-file` passes and other test cases are not
affected. Installed the patched systemd binaries on a machine, booted
it, looked for out of the usual behavior but did not find any.
|
|
Convert config_parse_exec() from using FOREACH_WORD_QUOTED into a loop
of unquote_first_word.
Loop through the arguments only once (the FOREACH_WORD_QUOTED
implementation did it twice, once to count them and another time to
process and store them.)
Use newly introduced flag UNQUOTE_UNESCAPE_RELAX to preserve
unrecognized escape sequences such as regexps matches such as "\w",
"\d", etc. (Valid escape sequences such as "\s" or "\b" still need an
extra backslash if literals are desired for regexps.)
Differences in behavior:
- Handle ; (command separator) in special, so that only ; on its own is
valid for that purpose, an quoted semicolon ";" or ';' will now behave
as a literal semicolon. This is probably what was initially intended.
- Handle \; (to introduce a literal semicolon) in special, so that only \;
is turned into a semicolon but not \\; or "\\;" or "\;" which are kept
as a literal \; in the output. This is probably what was initially
intended.
Known issues:
- Using an empty string (for example, ExecStartPre=<empty>) will empty
the list and remove the existing commands, but using whitespace only
(for example, ExecStartPre=<spaces>) will not. This is a pre-existing
issue and will be dealt with in a follow up commit.
Tested:
- Unit tests passing. Also `make distcheck` still works as expected.
- Installed it on a local machine and booted with it, checked console
output, systemctl and journalctl output, did not notice any issues
running the patched systemd binaries.
Relevant bug: https://bugs.freedesktop.org/show_bug.cgi?id=90794
|
|
These tests will be useful to check the cases regarding quoted and
escaped semicolon when we switch to using unquote_first_word.
Additionally, convert some of the tests that have semicolons so that the
argument after the semicolon looks like a path (starts with /) so that
we can see the change of behavior when making config_parse_exec more
strict about what it accepts as a command separator.
|
|
It will try to unquot_first_word, but if it runs into escaping problems
it will retry it adding UNQUOTE_CUNESCAPE_RELAX to the flags. If it
succeeds on the second try, it will log a warning about it. If it fails
both times, it will log an error.
Add test cases to confirm it behaves as expected.
|
|
The new flag UNQUOTE_UNESCAPE_RELAX preserves unrecognized escape
sequences verbatim in unquote_first_word, either when it's a trailing
backslash (similar to UNQUOTE_RELAX, but in this case keep the extra
backslash in the output) or in the middle of a sequence string.
Add unit test cases to ensure the new flag works as expected and to
prevent regressions from being introduced.
Tested with a follow up commit converting config_parse_exec() to start
using unquote_first_word, in which case this flags makes it possible to
preserve unrecognized escape sequences.
Relevant bug: https://bugs.freedesktop.org/show_bug.cgi?id=90794
|
|
|
|
sd-dhcp-client: readd deleted error check
|
|
logind: save /run/systemd/users/UID before starting user@.service
|
|
|
|
In kdbus we still have to support org.freedesktop.DBus matches even though
there is no real bus driver. The reason is that bus-control.c turns
NameOwnerChanged matches into proper kdbus matches. If we drop DRIVER
matches early, we will never match on name-changes for kdbus.
Two ways to fix this:
1) Install DRIVER matches on kdbus (which is the simple way our and which
is what this patch does).
2) Properly fix the scope-detection to let NameOwnerChanged matches
through (or better: block anything with Member!=NameOwnerChanged).
|
|
Seems to have been removed by mistake in:
9021bb9f935c93b516b10c88db2a212a9e3a8140
|
|
udevd: daemon - connect /dev/null to std{in,out,err} in debug mode
|
|
turn kdbus support into a runtime option
|
|
Not all watchdog drivers implement WDIOC_SETOPTIONS. Drivers which do
not implement it have their device always enabled. So it's fine to
report an error if WDIOS_DISABLECARD is passed and the ioctl is not
implemented, however failing when WDIOS_ENABLECARD is passed and the
ioctl is not implemented is not good: if the device was already
enabled then WDIOS_ENABLECARD was a no-op and wasn't needed in the
first place. So we can just ignore the error and continue.
|
|
logind: apply selinux label to XDG_RUNTIME_DIR
|
|
This is essentially a revert of 5c67cf2 and fixes issue #190.
|
